This option controls whether the local part is used to form the key for retry
hints for addresses that suffer temporary errors while being handled by this
-router. The default value is true for any router that has &%check_local_user%&
+.new
+router. The default value is true for any router that has any of
+&%check_local_user%&,
+&%local_parts%&,
+&%condition%&,
+&%local_part_prefix%&,
+&%local_part_suffix%&,
+&%senders%& or
+&%require_files%&
+.wen
set, and false otherwise. Note that this option does not apply to hints keys
for transport delays; they are controlled by a generic transport option of the
same name.
+Failing to set this option when it is needed
+(because a remote router handles only some of the local-parts for a domain)
+can result in incorrect error messages being generated.
+
The setting of &%retry_use_local_part%& applies only to the router on which it
appears. If the router generates child addresses, they are routed
independently; this setting does not become attached to them.
JH/35 Bug 2409: filter out-of-spec chars from callout response before using
them in our smtp response.
+JH/35 Have the general router option retry_use_local_part default to true when
+ any of the restrictive preconditions are set (to anything). Previously it
+ was only for check_local user. The change removes one item of manual
+ configuration which is required for proper retries when a remote router
+ handles a subset of addresses for a domain.
+
Exim version 4.92
-----------------
for(; addr; addr = addr->next)
{
uschar *ptr;
- retry_item *r;
/* The certificate verification status goes into the flags */
if (tls_out.certificate_verified) setflag(addr, af_cert_verified);
/* Retry information: for most success cases this will be null. */
- for (r = addr->retries; r; r = r->next)
+ for (retry_item * r = addr->retries; r; r = r->next)
{
sprintf(CS big_buffer, "%c%.500s", r->flags, r->key);
ptr = big_buffer + Ustrlen(big_buffer+2) + 3;
TRUE; otherwise its default is FALSE. */
if (r->retry_use_local_part == TRUE_UNSET)
- r->retry_use_local_part = r->check_local_user;
+ r->retry_use_local_part =
+ r->check_local_user || r->local_parts || r->condition || r->prefix || r->suffix || r->senders || r->require_files;
/* Build a host list if fallback hosts is set. */
allow_defer
data = :defer: not just now
+r_remain:
+ driver = redirect
+ allow_defer
+ data = :defer: not just now
+
+
# ----- Retry -----
begin retry
1999-03-02 09:44:33 10HmbG-0005vi-00 <= CALLER@test.ex U=CALLER P=local S=sss
1999-03-02 09:44:33 Start queue run: pid=pppp
1999-03-02 09:44:33 10HmbF-0005vi-00 == r4.a@outside routing defer (-51): retry time not reached
-1999-03-02 09:44:33 10HmbG-0005vi-00 == r4.b@outside routing defer (-51): retry time not reached
+1999-03-02 09:44:33 10HmbG-0005vi-00 == r4.b@outside R=r4 defer (-1): not just now
1999-03-02 09:44:33 End queue run: pid=pppp
1999-03-02 09:44:33 10HmbH-0005vi-00 <= CALLER@test.ex U=CALLER P=local S=sss
1999-03-02 09:44:33 10HmbH-0005vi-00 == r5.a@r5domain.ex R=r5 defer (-1): not just now
+1999-03-02 09:44:33 10HmbF-0005vi-00 removed by CALLER
+1999-03-02 09:44:33 10HmbF-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbG-0005vi-00 removed by CALLER
+1999-03-02 09:44:33 10HmbG-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbH-0005vi-00 removed by CALLER
+1999-03-02 09:44:33 10HmbH-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbI-0005vi-00 <= CALLER@test.ex U=CALLER P=local S=sss
+1999-03-02 09:44:33 10HmbI-0005vi-00 == rz.a@outside R=r_remain defer (-1): not just now
+1999-03-02 09:44:33 10HmbJ-0005vi-00 <= CALLER@test.ex U=CALLER P=local S=sss
+1999-03-02 09:44:33 10HmbJ-0005vi-00 == rz.b@outside R=r_remain defer (-1): not just now
+1999-03-02 09:44:33 Start queue run: pid=pppp
+1999-03-02 09:44:33 10HmbI-0005vi-00 == rz.a@outside routing defer (-51): retry time not reached
+1999-03-02 09:44:33 10HmbJ-0005vi-00 == rz.b@outside routing defer (-51): retry time not reached
+1999-03-02 09:44:33 End queue run: pid=pppp
****
exim -Mrm $msg1 $msg2
****
+# Using a router with preconditions (local_parts, here) should get an address-retry record
+sudo rm DIR/spool/db/retry
exim -odi r4.a@outside
****
+dump retry
exim -odq r4.b@outside
****
exim -q
****
exim -odi r5.a@r5domain.ex
****
+exim -Mrm $msg1 $msg2 $msg3
+****
+# Using a router with no non-domain preconditions, first should write a domain-retry record.
+sudo rm DIR/spool/db/retry
+exim -odi rz.a@outside
+****
+dump retry
+# Second will find it - this is visible in debug output
+exim -d-all+route+deliver+retry -odi rz.b@outside
+****
+exim -q
+****
no_msglog_check
no_message_check
--- /dev/null
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+admin user
+Writing spool header file: TESTSUITE/spool//input//hdr.10HmbJ-0005vi-00
+DSN: Write SPOOL: -dsn_envid NULL
+DSN: Write SPOOL :-dsn_ret 0
+DSN: Flags: 0x0
+DSN: **** SPOOL_OUT - address: <rz.b@outside> errorsto: <NULL> orcpt: <NULL> dsn_flags: 0x0
+Renaming spool header file: TESTSUITE/spool//input//10HmbJ-0005vi-00-H
+LOG: MAIN
+ <= CALLER@test.ex U=CALLER P=local S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+delivering 10HmbJ-0005vi-00
+Trying spool file TESTSUITE/spool//input//10HmbJ-0005vi-00-D
+reading spool file 10HmbJ-0005vi-00-H
+user=CALLER uid=CALLER_UID gid=CALLER_GID sender=CALLER@test.ex
+sender_local=1 ident=CALLER
+Non-recipients:
+Empty Tree
+---- End of tree ----
+recipients_count=1
+**** SPOOL_IN - No additional fields
+body_linecount=0 message_linecount=7
+DSN: set orcpt: flags: 0x0
+Delivery address list:
+ rz.b@outside
+locking TESTSUITE/spool/db/retry.lockfile
+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+Considering: rz.b@outside
+unique = rz.b@outside
+have domain retry record; next_try = now+0
+no address retry record
+rz.b@outside: queued for routing
+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+routing rz.b@outside
+--------> r1 router <--------
+local_part=rz.b domain=outside
+checking domains
+r1 router skipped: domains mismatch
+--------> r2 router <--------
+local_part=rz.b domain=outside
+checking domains
+r2 router skipped: domains mismatch
+--------> r3 router <--------
+local_part=rz.b domain=outside
+checking local_parts
+r3 router skipped: local_parts mismatch
+--------> r4 router <--------
+local_part=rz.b domain=outside
+checking local_parts
+r4 router skipped: local_parts mismatch
+--------> r5 router <--------
+local_part=rz.b domain=outside
+checking local_parts
+r5 router skipped: local_parts mismatch
+--------> r_remain router <--------
+local_part=rz.b domain=outside
+calling r_remain router
+rda_interpret (string): ':defer: not just now'
+expanded: ':defer: not just now'
+file is not a filter file
+parse_forward_list: :defer: not just now
+extract item: :defer: not just now
+r_remain router: defer for rz.b@outside
+ message: not just now
+added retry item for R:outside: errno=-1 more_errno=dd flags=0
+post-process rz.b@outside (1)
+LOG: MAIN
+ == rz.b@outside R=r_remain defer (-1): not just now
+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+After routing:
+ Local deliveries:
+ Remote deliveries:
+ Failed addresses:
+ Deferred addresses:
+ rz.b@outside
+>>>>>>>>>>>>>>>> deliveries are done >>>>>>>>>>>>>>>>
+Processing retry items
+Succeeded addresses:
+Failed addresses:
+Deferred addresses:
+ rz.b@outside
+locking TESTSUITE/spool/db/retry.lockfile
+retry for R:outside = * 0 0
+failing_interval=ttt message_age=ttt
+Writing retry data for R:outside
+ first failed=dddd last try=dddd next try=+300 expired=0
+ errno=-1 more_errno=dd not just now
+end of retry processing
+time on queue = 0s id 10HmbJ-0005vi-00 addr rz.b@outside
+warning counts: required 0 done 0
+delivery deferred: update_spool=1 header_rewritten=0
+Writing spool header file: TESTSUITE/spool//input//hdr.10HmbJ-0005vi-00
+DSN: Write SPOOL: -dsn_envid NULL
+DSN: Write SPOOL :-dsn_ret 0
+DSN: Flags: 0x0
+DSN: **** SPOOL_OUT - address: <rz.b@outside> errorsto: <NULL> orcpt: <NULL> dsn_flags: 0x0
+Renaming spool header file: TESTSUITE/spool//input//10HmbJ-0005vi-00-H
+end delivery of 10HmbJ-0005vi-00
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
locking TESTSUITE/spool/db/retry.lockfile
LOG: MAIN
=> CALLER <CALLER@myhost.test.ex> P=<> R=real T=real
-locking TESTSUITE/spool/db/retry.lockfile
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: MAIN
=> h1 <h1@myhost.test.ex> P=<CALLER@myhost.test.ex> R=ut8 T=ut1
log writing disabled
-locking TESTSUITE/spool/db/retry.lockfile
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
Message 10HmbC-0005vi-00 has been removed
Message 10HmbD-0005vi-00 has been removed
Message 10HmbE-0005vi-00 has been removed
++++++++++++++++++++++++++++
+ R:r4.a@outside -1 0 not just now
+first failed = time last try = time2 next try = time2 + 300
+Message 10HmbF-0005vi-00 has been removed
+Message 10HmbG-0005vi-00 has been removed
+Message 10HmbH-0005vi-00 has been removed
++++++++++++++++++++++++++++
+ R:outside -1 0 not just now
+first failed = time last try = time2 next try = time2 + 300
git://git.exim.org / users / jgh / exim.git / commitdiff