When this option is used by a caller other than root, and the list is different
from the compiled-in list, Exim gives up its root privilege immediately, and
runs with the real and effective uid and gid set to those of the caller.
-However, if a TRUSTED_CONFIG_PREFIX_LIST file is defined in &_Local/Makefile_&,
-root privilege is retained for any configuration file which matches a prefix
-listed in that file as long as the caller is the Exim user (or the user
-specified in the CONFIGURE_OWNER option, if any).
+However, if a TRUSTED_CONFIG_LIST file is defined in &_Local/Makefile_&, root
+privilege is retained for any configuration file which is listed in that file
+as long as the caller is the Exim user (or the user specified in the
+CONFIGURE_OWNER option, if any).
-Leaving TRUSTED_CONFIG_PREFIX_LIST unset precludes the possibility of testing
-a configuration using &%-C%& right through message reception and delivery,
+Leaving TRUSTED_CONFIG_LIST unset precludes the possibility of testing a
+configuration using &%-C%& right through message reception and delivery,
even if the caller is root. The reception works, but by that time, Exim is
running as the Exim user, so when it re-executes to regain privilege for the
delivery, the use of &%-C%& causes privilege to be lost. However, root can
option, which may specify a single file or a list of files. However, when
&%-C%& is used, Exim gives up its root privilege, unless called by root (or
unless the argument for &%-C%& is identical to the built-in value from
-CONFIGURE_FILE), or matches a prefix listed in the TRUSTED_CONFIG_PREFIX_LIST
-file and the caller is the Exim user or the user specified in the
-CONFIGURE_OWNER setting. &%-C%& is useful mainly for checking the syntax of
-configuration files before installing them. No owner or group checks are done
-on a configuration file specified by &%-C%&, if root privilege has been
-dropped.
+CONFIGURE_FILE), or is listed in the TRUSTED_CONFIG_LIST file and the caller
+is the Exim user or the user specified in the CONFIGURE_OWNER setting. &%-C%&
+is useful mainly for checking the syntax of configuration files before
+installing them. No owner or group checks are done on a configuration file
+specified by &%-C%&, if root privilege has been dropped.
Even the Exim user is not trusted to specify an arbitrary configuration file
with the &%-C%& option to be used with root privileges, unless that file is
-listed in the TRUSTED_CONFIG_PREFIX_LIST file. This locks out the possibility
-of testing a configuration using &%-C%& right through message reception and
+listed in the TRUSTED_CONFIG_LIST file. This locks out the possibility of
+testing a configuration using &%-C%& right through message reception and
delivery, even if the caller is root. The reception works, but by that time,
Exim is running as the Exim user, so when it re-execs to regain privilege for
the delivery, the use of &%-C%& causes privilege to be lost. However, root
configuration file, and using it to break into other accounts.
.next
If a non-trusted configuration file (i.e. not the default configuration file
-or one which is trusted by virtue of matching a prefix listed in the
-TRUSTED_CONFIG_PREFIX_LIST file) is specified with &%-C%&, or if macros are
-given with &%-D%& (but see the next item), then root privilege is retained only
-if the caller of Exim is root. This locks out the possibility of testing a
-configuration using &%-C%& right through message reception and delivery, even
-if the caller is root. The reception works, but by that time, Exim is running
-as the Exim user, so when it re-execs to regain privilege for the delivery, the
-use of &%-C%& causes privilege to be lost. However, root can test reception and
-delivery using two separate commands.
+or one which is trusted by virtue of being listed in the TRUSTED_CONFIG_LIST
+file) is specified with &%-C%&, or if macros are given with &%-D%& (but see
+the next item), then root privilege is retained only if the caller of Exim is
+root. This locks out the possibility of testing a configuration using &%-C%&
+right through message reception and delivery, even if the caller is root. The
+reception works, but by that time, Exim is running as the Exim user, so when
+it re-execs to regain privilege for the delivery, the use of &%-C%& causes
+privilege to be lost. However, root can test reception and delivery using two
+separate commands.
.next
The WHITELIST_D_MACROS build option declares some macros to be safe to override
with &%-D%& if the real uid is one of root, the Exim run-time user or the
for other users. Others should always drop root privileges if they use
-C on the command line, even for a whitelisted configure file.
+DW/31 Turn TRUSTED_CONFIG_PREFIX_FILE into TRUSTED_CONFIG_FILE. No prefixes.
+
Exim version 4.72
-----------------
on; the Exim user can, by default, no longer use -C/-D and retain privilege.
Two new build options mitigate this.
- * TRUSTED_CONFIG_PREFIX_LIST defines a path prefix within which files
- owned by root can be used by the Exim user; this is the recommended
- approach going forward.
+ * TRUSTED_CONFIG_LIST defines a file containing a whitelist of config
+ files that are trusted to be selected by the Exim user; this is the
+ recommended approach going forward.
* WHITELIST_D_MACROS defines a colon-separated list of macro names which
the Exim run-time user may safely pass without dropping privileges.
12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
is forced on. This is mitigated by the new build option
- TRUSTED_CONFIG_PREFIX_LIST which defines a list of pathname prefices which
- are trusted; if a config file is owned by root and is under that prefix,
- then it may be used by the Exim run-time user.
+ TRUSTED_CONFIG_LIST which defines a list of configuration files which
+ are trusted; if a config file is owned by root and matches a pathname in
+ the list, then it may be invoked by the Exim build-time user without Exim
+ relinquishing root privileges.
13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
trusted to supply -D<Macro[=Value]> overrides on the command-line. Going
- forward, we recommend using TRUSTED_CONFIG_PREFIX_LIST with shim configs
- that include the main config. As a transition mechanism, we are
- temporarily providing a work-around: the new build option
- WHITELIST_D_MACROS provides a colon-separated list of macro names which
- may be overriden by the Exim run-time user. The values of these macros
- are constrained to the regex ^[A-Za-z0-9_/.-]*$ (which explicitly does
- allow for empty values).
+ forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
+ include the main config. As a transition mechanism, we are temporarily
+ providing a work-around: the new build option WHITELIST_D_MACROS provides
+ a colon-separated list of macro names which may be overriden by the Exim
+ run-time user. The values of these macros are constrained to the regex
+ ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
Version 4.72
# When a user other than root uses the -C option to override the configuration
# file (including the Exim user when re-executing Exim to regain root
# privileges for local message delivery), this will normally cause Exim to
-# drop root privileges. The TRUSTED_CONFIG_PREFIX_LIST option, specifies
-# a file which contains a list of trusted configuration prefixes (like the
-# ALT_CONFIG_PREFIX above), one per line. If the -C option is used by the Exim
-# user or by the user specified in the CONFIGURE_OWNER setting, to specify a
-# configuration file which matches a trusted prefix, root privileges are not
-# dropped by Exim.
-
-# TRUSTED_CONFIG_PREFIX_LIST=/usr/exim/trusted_configs
+# drop root privileges. The TRUSTED_CONFIG_LIST option, specifies a file which
+# contains a list of trusted configuration filenames, one per line. If the -C
+# option is used by the Exim user or by the user specified in the
+# CONFIGURE_OWNER setting, to specify a configuration file which is listed in
+# the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim.
+
+# TRUSTED_CONFIG_LIST=/usr/exim/trusted_configs
#------------------------------------------------------------------------------
it's a default value. */
#define ALT_CONFIG_PREFIX
-#define TRUSTED_CONFIG_PREFIX_LIST
+#define TRUSTED_CONFIG_LIST
#define APPENDFILE_MODE 0600
#define APPENDFILE_DIRECTORY_MODE 0700
#endif
if (real_uid != root_uid)
{
- #ifdef TRUSTED_CONFIG_PREFIX_LIST
+ #ifdef TRUSTED_CONFIG_LIST
- if ((real_uid != exim_uid
- #ifdef CONFIGURE_OWNER
- && real_uid != config_uid
- #endif
- ) || Ustrstr(argrest, "/../"))
+ if (real_uid != exim_uid
+ #ifdef CONFIGURE_OWNER
+ && real_uid != config_uid
+ #endif
+ )
trusted_config = FALSE;
else
{
- FILE *trust_list = Ufopen(TRUSTED_CONFIG_PREFIX_LIST, "rb");
+ FILE *trust_list = Ufopen(TRUSTED_CONFIG_LIST, "rb");
if (trust_list)
{
struct stat statbuf;
{
/* Well, the trust list at least is up to scratch... */
void *reset_point = store_get(0);
- uschar *trusted_prefixes[32];
- int nr_prefixes = 0;
+ uschar *trusted_configs[32];
+ int nr_configs = 0;
int i = 0;
while (Ufgets(big_buffer, big_buffer_size, trust_list))
nl = Ustrchr(start, '\n');
if (nl)
*nl = 0;
- trusted_prefixes[nr_prefixes++] = string_copy(start);
- if (nr_prefixes == 32)
+ trusted_configs[nr_configs++] = string_copy(start);
+ if (nr_configs == 32)
break;
}
fclose(trust_list);
- if (nr_prefixes)
+ if (nr_configs)
{
int sep = 0;
uschar *list = argrest;
while (trusted_config && (filename = string_nextinlist(&list,
&sep, big_buffer, big_buffer_size)) != NULL)
{
- for (i=0; i < nr_prefixes; i++)
+ for (i=0; i < nr_configs; i++)
{
- int len = Ustrlen(trusted_prefixes[i]);
- if (Ustrlen(filename) >= len &&
- Ustrncmp(filename, trusted_prefixes[i], len) == 0)
+ if (Ustrcmp(filename, trusted_configs[i]) == 0)
break;
}
- if (i == nr_prefixes)
+ if (i == nr_configs)
{
trusted_config = FALSE;
break;
else
log_write(0, LOG_MAIN|LOG_PANIC,
"exim user lost privilege for using %s option",
- (int)exim_uid, trusted_config? "-D" : "-C");
+ trusted_config? "-D" : "-C");
}
/* Start up Perl interpreter if Perl support is configured and there is a
git://git.exim.org / users / jgh / exim.git / commitdiff