message on the same connection. See section &<<SECTmulmessam>>& for an
explanation of when this might be needed.
-.option hosts_noproxy_tls smtp "host list&!!" *
+.new
+.option hosts_noproxy_tls smtp "host list&!!" unset
.cindex "TLS" "passing connection"
.cindex "multiple SMTP deliveries"
.cindex "TLS" "multiple message deliveries"
For any host that matches this list, a TLS session which has
been started will not be passed to a new delivery process for sending another
message on the same session.
+.wen
The traditional implementation closes down TLS and re-starts it in the new
process, on the same open TCP connection, for each successive message
directory-of-certs mode. Previously they were advertised despite the
documentation.
+JH/21 The smtp transport option "hosts_noproxy_tls" is now unset by default.
+ A single TCP connection by a client will now hold a TLS connection open
+ for multiple message deliveries, by default. Previoud the default was to
+ not do so.
+
+
Exim version 4.92
-----------------
.hosts_avoid_esmtp = NULL,
#ifdef SUPPORT_TLS
.hosts_nopass_tls = NULL,
- .hosts_noproxy_tls = US"*",
+ .hosts_noproxy_tls = NULL,
#endif
.command_timeout = 5*60,
.connect_timeout = 5*60,
# Exim test configuration 2013
SERVER =
+PEX = :
.include DIR/aux-var/tls_conf_prefix
allow_localhost
hosts_override
hosts = 127.0.0.1
- hosts_noproxy_tls = :
+ hosts_noproxy_tls = PEX
port = PORT_D
tls_try_verify_hosts = :
# Exim test configuration 2113
SERVER =
+PEX = :
.include DIR/aux-var/tls_conf_prefix
allow_localhost
hosts_override
hosts = 127.0.0.1
- hosts_noproxy_tls = :
+ hosts_noproxy_tls = PEX
port = PORT_D
tls_try_verify_hosts = :
# Exim test configuration 3451
SERVER =
+PEX = :
.include DIR/aux-var/tls_conf_prefix
allow_localhost
hosts = 127.0.0.1
hosts_try_auth = *
+ hosts_noproxy_tls = PEX
port = PORT_D
# End
# Exim test configuration 3461
SERVER =
+PEX = :
.include DIR/aux-var/tls_conf_prefix
allow_localhost
hosts = 127.0.0.1
hosts_try_auth = *
+ hosts_noproxy_tls = PEX
port = PORT_D
tls_try_verify_hosts = :
1999-03-02 09:44:33 10HmbE-0005vi-00 => userb@test.ex R=cl_override T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbI-0005vi-00"
1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
+1999-03-02 09:44:33 10HmbJ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for userx@test.ex
+1999-03-02 09:44:33 10HmbK-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for usery@test.ex
+1999-03-02 09:44:33 10HmbL-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for userz@test.ex
+1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
+1999-03-02 09:44:33 10HmbJ-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmbM-0005vi-00"
+1999-03-02 09:44:33 10HmbJ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbL-0005vi-00 => userz@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmbN-0005vi-00"
+1999-03-02 09:44:33 10HmbL-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbK-0005vi-00 => usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmbO-0005vi-00"
+1999-03-02 09:44:33 10HmbK-0005vi-00 Completed
+1999-03-02 09:44:33 End queue run: pid=pppp -qqf
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
1999-03-02 09:44:33 10HmbI-0005vi-00 => userb <userb@test.ex> R=server T=local_delivery
1999-03-02 09:44:33 10HmbI-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qf
+1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
+1999-03-02 09:44:33 SMTP connection from [127.0.0.1]:1113 (TCP/IP connection count = 1)
+1999-03-02 09:44:33 10HmbM-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbJ-0005vi-00@myhost.test.ex for userx@test.ex
+1999-03-02 09:44:33 10HmbN-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbL-0005vi-00@myhost.test.ex for userz@test.ex
+1999-03-02 09:44:33 10HmbO-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbK-0005vi-00@myhost.test.ex for usery@test.ex
+1999-03-02 09:44:33 SMTP connection from localhost (myhost.test.ex) [127.0.0.1]:1113 closed by QUIT
1999-03-02 09:44:33 10HmbE-0005vi-00 => userb@test.ex R=cl_override T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbI-0005vi-00"
1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
+1999-03-02 09:44:33 10HmbJ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for userx@test.ex
+1999-03-02 09:44:33 10HmbK-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for usery@test.ex
+1999-03-02 09:44:33 10HmbL-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for userz@test.ex
+1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
+1999-03-02 09:44:33 10HmbJ-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmbM-0005vi-00"
+1999-03-02 09:44:33 10HmbJ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbL-0005vi-00 => userz@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmbN-0005vi-00"
+1999-03-02 09:44:33 10HmbL-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbK-0005vi-00 => usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmbO-0005vi-00"
+1999-03-02 09:44:33 10HmbK-0005vi-00 Completed
+1999-03-02 09:44:33 End queue run: pid=pppp -qqf
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
1999-03-02 09:44:33 10HmbI-0005vi-00 => userb <userb@test.ex> R=server T=local_delivery
1999-03-02 09:44:33 10HmbI-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qf
+1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
+1999-03-02 09:44:33 SMTP connection from [127.0.0.1]:1113 (TCP/IP connection count = 1)
+1999-03-02 09:44:33 10HmbM-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbJ-0005vi-00@myhost.test.ex for userx@test.ex
+1999-03-02 09:44:33 10HmbN-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbL-0005vi-00@myhost.test.ex for userz@test.ex
+1999-03-02 09:44:33 10HmbO-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbK-0005vi-00@myhost.test.ex for usery@test.ex
+1999-03-02 09:44:33 SMTP connection from localhost (myhost.test.ex) [127.0.0.1]:1113 closed by QUIT
1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
1999-03-02 09:44:33 10HmaX-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" A=plain C="250 OK id=10HmaZ-0005vi-00"
1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" A=plain C="250 OK id=10HmbA-0005vi-00"
+1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
+1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" A=plain C="250 OK id=10HmbB-0005vi-00"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" A=plain C="250 OK id=10HmbC-0005vi-00"
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 End queue run: pid=pppp -qqf
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaX-0005vi-00@myhost.test.ex
1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaY-0005vi-00@myhost.test.ex
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaX-0005vi-00@myhost.test.ex
+1999-03-02 09:44:33 10HmbC-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaY-0005vi-00@myhost.test.ex
1999-03-02 09:44:33 Start queue run: pid=pppp -qf
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbB-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbC-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
+1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qf
1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
1999-03-02 09:44:33 10HmaX-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" A=plain C="250 OK id=10HmaZ-0005vi-00"
1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" A=plain C="250 OK id=10HmbA-0005vi-00"
+1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
1999-03-02 09:44:33 10HmaX-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" A=plain C="250 OK id=10HmaZ-0005vi-00"
1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" A=plain C="250 OK id=10HmbA-0005vi-00"
+1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
+1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" A=plain C="250 OK id=10HmbB-0005vi-00"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" A=plain C="250 OK id=10HmbC-0005vi-00"
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 End queue run: pid=pppp -qqf
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaX-0005vi-00@myhost.test.ex
1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaY-0005vi-00@myhost.test.ex
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaX-0005vi-00@myhost.test.ex
+1999-03-02 09:44:33 10HmbC-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1] P=esmtpsa X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no A=plain:userx S=sss id=E10HmaY-0005vi-00@myhost.test.ex
1999-03-02 09:44:33 Start queue run: pid=pppp -qf
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbB-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbC-0005vi-00 => userx <userx@test.ex> R=server T=local_delivery
+1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qf
1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
1999-03-02 09:44:33 10HmaX-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" A=plain C="250 OK id=10HmaZ-0005vi-00"
1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" A=plain C="250 OK id=10HmbA-0005vi-00"
+1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
+Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
+ by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
+ (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbB-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
(Exim x.yz)
Test message 1
From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
+Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
+ by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
+ (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbC-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
(Exim x.yz)
From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
+Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
+ by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
+ (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbB-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
(Exim x.yz)
Test message 1
From CALLER@myhost.test.ex Tue Mar 02 09:44:33 1999
+Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
+ by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
+ (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbC-0005vi-00
+ for userx@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
Received: from localhost ([127.0.0.1] helo=myhost.test.ex)
by myhost.test.ex with esmtpsa (TLS1.x:ke-RSA-AES256-SHAnnn:xxx)
(Exim x.yz)
--- /dev/null
+1999-03-02 09:44:33 Received from CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbJ-0005vi-00@myhost.test.ex
--- /dev/null
+1999-03-02 09:44:33 Received from CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbL-0005vi-00@myhost.test.ex
--- /dev/null
+1999-03-02 09:44:33 Received from CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbK-0005vi-00@myhost.test.ex
--- /dev/null
+1999-03-02 09:44:33 Received from CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbJ-0005vi-00@myhost.test.ex
--- /dev/null
+1999-03-02 09:44:33 Received from CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbL-0005vi-00@myhost.test.ex
--- /dev/null
+1999-03-02 09:44:33 Received from CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbK-0005vi-00@myhost.test.ex
killdaemon
exim -DSERVER=server -DNOTDAEMON -qf
****
+#
+#
+# no tls proxy (default for test was permitting proxy)
+exim -DSERVER=server -bd -oX PORT_D
+****
+exim userx@test.ex
+Test message 1
+****
+exim usery@test.ex
+Test message 2
+****
+exim userz@test.ex
+Test message 3
+****
+exim -d-all+acl '-DPEX=*' -qqf
+****
+killdaemon
killdaemon
exim -DSERVER=server -DNOTDAEMON -qf
****
+#
+#
+# no tls proxy (default for test was permitting proxy)
+exim -DSERVER=server -bd -oX PORT_D
+****
+exim userx@test.ex
+Test message 1
+****
+exim usery@test.ex
+Test message 2
+****
+exim userz@test.ex
+Test message 3
+****
+exim -d-all+acl '-DPEX=*' -qqf
+****
+killdaemon
****
exim -qqf
****
+#
+#
+# without contined-tls (test default is with)
+exim '-DPEX=*' -qqf
+****
killdaemon
exim -DSERVER=server -DNOTDAEMON -qf
****
****
exim -qqf
****
+#
+#
+# without contined-tls (test default is with)
+exim '-DPEX=*' -qqf
+****
killdaemon
exim -DSERVER=server -DNOTDAEMON -qf
****
LOG: queue_run MAIN
End queue run: pid=pppp -qqf
>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+admin user
+dropping to exim gid; retaining priv uid
+LOG: queue_run MAIN
+ Start queue run: pid=pppp -qqf
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250-STARTTLS
+ 250 HELP
+ SMTP>> STARTTLS
+cmd buf flush ddd bytes
+ SMTP<< 220 TLS go ahead
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250 HELP
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> RCPT TO:<userx@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+ SMTP<< 250 OK
+ SMTP<< 250 Accepted
+ SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP<< 250 OK id=10HmbM-0005vi-00
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250-STARTTLS
+ 250 HELP
+ SMTP(close)>>
+LOG: MAIN
+ => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmbM-0005vi-00"
+LOG: MAIN
+ Completed
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+ SMTP>> STARTTLS
+cmd buf flush ddd bytes
+ SMTP<< 220 TLS go ahead
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250 HELP
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> RCPT TO:<userz@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+ SMTP<< 250 OK
+ SMTP<< 250 Accepted
+ SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP<< 250 OK id=10HmbN-0005vi-00
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250-STARTTLS
+ 250 HELP
+ SMTP(close)>>
+LOG: MAIN
+ => userz@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmbN-0005vi-00"
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+ SMTP>> STARTTLS
+cmd buf flush ddd bytes
+ SMTP<< 220 TLS go ahead
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250 HELP
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> RCPT TO:<usery@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+ SMTP<< 250 OK
+ SMTP<< 250 Accepted
+ SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP<< 250 OK id=10HmbO-0005vi-00
+ SMTP>> QUIT
+cmd buf flush ddd bytes
+ SMTP(close)>>
+LOG: MAIN
+ => usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="C=UK,O=The Exim Maintainers,OU=Test Suite,CN=Phil Pennock" C="250 OK id=10HmbO-0005vi-00"
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: queue_run MAIN
+ End queue run: pid=pppp -qqf
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
******** SERVER ********
LOG: queue_run MAIN
End queue run: pid=pppp -qqf
>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+admin user
+dropping to exim gid; retaining priv uid
+LOG: queue_run MAIN
+ Start queue run: pid=pppp -qqf
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250-STARTTLS
+ 250 HELP
+ SMTP>> STARTTLS
+cmd buf flush ddd bytes
+ SMTP<< 220 TLS go ahead
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250 HELP
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> RCPT TO:<userx@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+ SMTP<< 250 OK
+ SMTP<< 250 Accepted
+ SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP<< 250 OK id=10HmbM-0005vi-00
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250-STARTTLS
+ 250 HELP
+ SMTP(close)>>
+LOG: MAIN
+ => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmbM-0005vi-00"
+LOG: MAIN
+ Completed
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+ SMTP>> STARTTLS
+cmd buf flush ddd bytes
+ SMTP<< 220 TLS go ahead
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250 HELP
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> RCPT TO:<userz@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+ SMTP<< 250 OK
+ SMTP<< 250 Accepted
+ SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP<< 250 OK id=10HmbN-0005vi-00
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250-STARTTLS
+ 250 HELP
+ SMTP(close)>>
+LOG: MAIN
+ => userz@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmbN-0005vi-00"
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+ SMTP>> STARTTLS
+cmd buf flush ddd bytes
+ SMTP<< 220 TLS go ahead
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-myhost.test.ex Hello localhost [127.0.0.1]
+ 250-SIZE 52428800
+ 250-8BITMIME
+ 250-PIPELINING
+ 250 HELP
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> RCPT TO:<usery@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+ SMTP<< 250 OK
+ SMTP<< 250 Accepted
+ SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP<< 250 OK id=10HmbO-0005vi-00
+ SMTP>> QUIT
+cmd buf flush ddd bytes
+ SMTP(close)>>
+LOG: MAIN
+ => usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no DN="/C=UK/O=The Exim Maintainers/OU=Test Suite/CN=Phil Pennock" C="250 OK id=10HmbO-0005vi-00"
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: queue_run MAIN
+ End queue run: pid=pppp -qqf
+>>>>>>>>>>>>>>>> Exim pid=pppp (main) terminating with rc=0 >>>>>>>>>>>>>>>>
******** SERVER ********