#include "../exim.h"
#include "smtp.h"
+#if defined(SUPPORT_DANE) && defined(DISABLE_TLS)
+# error TLS is required for DANE
+#endif
+
/* Options specific to the smtp transport. This transport also supports LMTP
over TCP/IP. The options must be in alphabetic order (note that "_" comes
#endif
{ "hosts_override", opt_bool,
(void *)offsetof(smtp_transport_options_block, hosts_override) },
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
{ "hosts_pipe_connect", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_pipe_connect) },
#endif
.hosts_avoid_tls = NULL,
.hosts_verify_avoid_tls = NULL,
.hosts_avoid_pipelining = NULL,
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
.hosts_pipe_connect = NULL,
#endif
.hosts_avoid_esmtp = NULL,
.gethostbyname = FALSE,
.dns_qualify_single = TRUE,
.dns_search_parents = FALSE,
- .dnssec = { .request=NULL, .require=NULL },
+ .dnssec = { .request= US"*", .require=NULL },
.delay_after_cutoff = TRUE,
.hosts_override = FALSE,
.hosts_randomize = FALSE,
static unsigned ehlo_response(uschar * buf, unsigned checks);
+/******************************************************************************/
+
+void
+smtp_deliver_init(void)
+{
+if (!regex_PIPELINING) regex_PIPELINING =
+ regex_must_compile(US"\\n250[\\s\\-]PIPELINING(\\s|\\n|$)", FALSE, TRUE);
+
+if (!regex_SIZE) regex_SIZE =
+ regex_must_compile(US"\\n250[\\s\\-]SIZE(\\s|\\n|$)", FALSE, TRUE);
+
+if (!regex_AUTH) regex_AUTH =
+ regex_must_compile(AUTHS_REGEX, FALSE, TRUE);
+
+#ifndef DISABLE_TLS
+if (!regex_STARTTLS) regex_STARTTLS =
+ regex_must_compile(US"\\n250[\\s\\-]STARTTLS(\\s|\\n|$)", FALSE, TRUE);
+#endif
+
+if (!regex_CHUNKING) regex_CHUNKING =
+ regex_must_compile(US"\\n250[\\s\\-]CHUNKING(\\s|\\n|$)", FALSE, TRUE);
+
+#ifndef DISABLE_PRDR
+if (!regex_PRDR) regex_PRDR =
+ regex_must_compile(US"\\n250[\\s\\-]PRDR(\\s|\\n|$)", FALSE, TRUE);
+#endif
+
+#ifdef SUPPORT_I18N
+if (!regex_UTF8) regex_UTF8 =
+ regex_must_compile(US"\\n250[\\s\\-]SMTPUTF8(\\s|\\n|$)", FALSE, TRUE);
+#endif
+
+if (!regex_DSN) regex_DSN =
+ regex_must_compile(US"\\n250[\\s\\-]DSN(\\s|\\n|$)", FALSE, TRUE);
+
+if (!regex_IGNOREQUOTA) regex_IGNOREQUOTA =
+ regex_must_compile(US"\\n250[\\s\\-]IGNOREQUOTA(\\s|\\n|$)", FALSE, TRUE);
+
+#ifndef DISABLE_PIPE_CONNECT
+if (!regex_EARLY_PIPE) regex_EARLY_PIPE =
+ regex_must_compile(US"\\n250[\\s\\-]" EARLY_PIPE_FEATURE_NAME "(\\s|\\n|$)", FALSE, TRUE);
+#endif
+}
+
+
/*************************************************
* Setup entry point *
*************************************************/
return FALSE;
case ERRNO_WRITEINCOMPLETE: /* failure to write a complete data block */
- *message = string_sprintf("failed to write a data block");
+ *message = US"failed to write a data block";
return FALSE;
#ifdef SUPPORT_I18N
#ifdef EXPERIMENTAL_DSN_INFO
sx->helo_response = string_copy(sx->buffer);
#endif
+#ifndef DISABLE_EVENT
+(void) event_raise(sx->conn_args.tblock->event_action,
+ US"smtp:ehlo", sx->buffer);
+#endif
return TRUE;
}
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
static uschar *
ehlo_cache_key(const smtp_context * sx)
{
smtp_transport_options_block * ob = sx->conn_args.ob;
int yield = 0;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
int rc;
if ((rc = smtp_reap_early_pipe(sx, &count)) != OK)
return rc == FAIL ? -4 : -5;
else if (errno != 0 || sx->buffer[0] == 0)
{
- string_format(big_buffer, big_buffer_size, "RCPT TO:<%s>",
+ gstring gs = { .size = big_buffer_size, .ptr = 0, .s = big_buffer }, * g = &gs;
+
+ /* Use taint-unchecked routines for writing into big_buffer, trusting
+ that we'll never expand it. */
+
+ g = string_fmt_append_f(g, SVFMT_TAINT_NOCHK, "RCPT TO:<%s>",
transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes));
+ string_from_gstring(g);
return -2;
}
host_item * host = sx->conn_args.host; /* host to deliver to */
smtp_transport_options_block * ob = sx->conn_args.ob; /* transport options */
int require_auth = verify_check_given_host(CUSS &ob->hosts_require_auth, host);
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
unsigned short authbits = tls_out.active.sock >= 0
? sx->ehlo_resp.crypted_auths : sx->ehlo_resp.cleartext_auths;
#endif
if ( sx->esmtp
&&
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
sx->early_pipe_active ? authbits
:
#endif
uschar * names = NULL;
expand_nmax = -1; /* reset */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (!sx->early_pipe_active)
#endif
names = string_copyn(expand_nstring[1], expand_nlength[1]);
DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
fail_reason = US"no common mechanisms were found";
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (sx->early_pipe_active)
{
/* Scan our authenticators (which support use by a client and were offered
Return True on error, otherwise buffer has (possibly empty) terminated string
*/
-BOOL
+static BOOL
smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist,
smtp_transport_options_block *ob)
{
-uschar *local_authenticated_sender = authenticated_sender;
+uschar * local_authenticated_sender = authenticated_sender;
#ifdef notdef
debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, f.smtp_authenticated?"Y":"N");
#endif
-if (ob->authenticated_sender != NULL)
+if (ob->authenticated_sender)
{
uschar *new = expand_string(ob->authenticated_sender);
- if (new == NULL)
+ if (!new)
{
if (!f.expand_string_forcedfail)
{
return TRUE;
}
}
- else if (new[0] != 0) local_authenticated_sender = new;
+ else if (*new) local_authenticated_sender = new;
}
/* Add the authenticated sender address if present */
-if ((f.smtp_authenticated || ob->authenticated_sender_force) &&
- local_authenticated_sender != NULL)
+if ( (f.smtp_authenticated || ob->authenticated_sender_force)
+ && local_authenticated_sender)
{
- string_format(buffer, bufsize, " AUTH=%s",
+ string_format_nt(buffer, bufsize, " AUTH=%s",
auth_xtextencode(local_authenticated_sender,
- Ustrlen(local_authenticated_sender)));
+ Ustrlen(local_authenticated_sender)));
client_authenticated_sender = string_copy(local_authenticated_sender);
}
else
-#ifdef SUPPORT_DANE
-/* Lookup TLSA record for host/port.
-Return: OK success with dnssec; DANE mode
- DEFER Do not use this host now, may retry later
- FAIL_FORCED No TLSA record; DANE not usable
- FAIL Do not use this connection
-*/
-
-int
-tlsa_lookup(const host_item * host, dns_answer * dnsa, BOOL dane_required)
-{
-/* move this out to host.c given the similarity to dns_lookup() ? */
-uschar buffer[300];
-const uschar * fullname = buffer;
-int rc;
-BOOL sec;
-
-/* TLSA lookup string */
-(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name);
-
-rc = dns_lookup(dnsa, buffer, T_TLSA, &fullname);
-sec = dns_is_secure(dnsa);
-DEBUG(D_transport)
- debug_printf("TLSA lookup ret %d %sDNSSEC\n", rc, sec ? "" : "not ");
-
-switch (rc)
- {
- case DNS_AGAIN:
- return DEFER; /* just defer this TLS'd conn */
-
- case DNS_SUCCEED:
- if (sec)
- {
- DEBUG(D_transport)
- {
- dns_scan dnss;
- for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
- rr = dns_next_rr(dnsa, &dnss, RESET_NEXT))
- if (rr->type == T_TLSA && rr->size > 3)
- {
- uint16_t payload_length = rr->size - 3;
- uschar s[MAX_TLSA_EXPANDED_SIZE], * sp = s, * p = US rr->data;
-
- sp += sprintf(CS sp, "%d ", *p++); /* usage */
- sp += sprintf(CS sp, "%d ", *p++); /* selector */
- sp += sprintf(CS sp, "%d ", *p++); /* matchtype */
- while (payload_length-- > 0 && sp-s < (MAX_TLSA_EXPANDED_SIZE - 4))
- sp += sprintf(CS sp, "%02x", *p++);
-
- debug_printf(" %s\n", s);
- }
- }
- return OK;
- }
- log_write(0, LOG_MAIN,
- "DANE error: TLSA lookup for %s not DNSSEC", host->name);
- /*FALLTRHOUGH*/
-
- case DNS_NODATA: /* no TLSA RR for this lookup */
- case DNS_NOMATCH: /* no records at all for this lookup */
- return dane_required ? FAIL : FAIL_FORCED;
-
- default:
- case DNS_FAIL:
- return dane_required ? FAIL : DEFER;
- }
-}
-#endif
-
-
-
typedef struct smtp_compare_s
{
uschar *current_sender_address;
&& pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
checks &= ~OPTION_SIZE;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if ( checks & OPTION_EARLY_PIPE
&& pcre_exec(regex_EARLY_PIPE, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
if (chunk_size > 0)
{
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
BOOL new_conn = !!(sx->outblock.conn_args);
#endif
if((cmd_count = smtp_write_command(sx,
) < 0) return ERROR;
if (flags & tc_chunk_last)
data_command = string_copy(big_buffer); /* Save for later error message */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
/* That command write could have been the one that made the connection.
Copy the fd from the client conn ctx (smtp transport specific) to the
generic transport ctx. */
case -5: errno = ERRNO_TLSFAILURE;
return DEFER;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
case -4: /* non-2xx for pipelined banner or EHLO */
#endif
case -1: /* Timeout on RCPT */
BOOL pass_message = FALSE;
uschar * message = NULL;
int yield = OK;
-int rc;
#ifndef DISABLE_TLS
uschar * tls_errstr;
#endif
sx->dane_required =
verify_check_given_host(CUSS &ob->hosts_require_dane, sx->conn_args.host) == OK;
#endif
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
sx->early_pipe_active = sx->early_pipe_ok = FALSE;
sx->ehlo_resp.cleartext_features = sx->ehlo_resp.crypted_features = 0;
sx->pending_BANNER = sx->pending_EHLO = FALSE;
#ifdef EXPERIMENTAL_TLS_RESUME
tls_out.resumption = 0;
#endif
+tls_out.ver = NULL;
/* Flip the legacy TLS-related variables over to the outbound set in case
they're used in the context of the transport. Don't bother resetting
if (sx->conn_args.host->dnssec == DS_YES)
{
+ int rc;
if( sx->dane_required
|| verify_check_given_host(CUSS &ob->hosts_try_dane, sx->conn_args.host) == OK
)
sx->inblock.cctx = sx->outblock.cctx = &sx->cctx;
sx->avoid_option = sx->peer_offered = smtp_peer_options = 0;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if ( verify_check_given_host(CUSS &ob->hosts_pipe_connect,
sx->conn_args.host) == OK)
if (!sx->smtps)
{
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (sx->early_pipe_active)
{
sx->pending_BANNER = TRUE; /* sync_responses() must eventually handle */
if (sx->esmtp)
{
if (smtp_write_command(sx,
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
sx->early_pipe_active ? SCMD_BUFFER :
#endif
SCMD_FLUSH,
goto SEND_FAILED;
sx->esmtp_sent = TRUE;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (sx->early_pipe_active)
{
sx->pending_EHLO = TRUE;
DEBUG(D_transport)
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (!sx->early_pipe_active)
#endif
if (!sx->esmtp)
if (sx->esmtp || sx->lmtp)
{
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (!sx->early_pipe_active)
#endif
{
sx->peer_offered = ehlo_response(sx->buffer,
OPTION_TLS /* others checked later */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
| (sx->early_pipe_ok
? OPTION_IGNQ
| OPTION_CHUNKING | OPTION_PRDR | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
)
#endif
);
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (sx->early_pipe_ok)
{
sx->ehlo_resp.cleartext_features = sx->peer_offered;
if (smtp_write_command(sx, SCMD_FLUSH, "STARTTLS\r\n") < 0)
goto SEND_FAILED;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
/* If doing early-pipelining reap the banner and EHLO-response but leave
the response for the STARTTLS we just sent alone. */
addr->peercert = tls_out.peercert;
addr->peerdn = tls_out.peerdn;
addr->ocsp = tls_out.ocsp;
+ addr->tlsver = tls_out.ver;
}
}
}
goto SEND_QUIT;
}
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
/* For SMTPS there is no cleartext early-pipe; use the crypted permission bit.
We're unlikely to get the group sent and delivered before the server sends its
banner, but it's still worth sending as a group.
/* For SMTPS we need to wait for the initial OK response. */
if (sx->smtps)
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (sx->early_pipe_active)
{
sx->pending_BANNER = TRUE;
}
if (smtp_write_command(sx,
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
sx->early_pipe_active ? SCMD_BUFFER :
#endif
SCMD_FLUSH,
"%s %s\r\n", greeting_cmd, sx->helo_data) < 0)
goto SEND_FAILED;
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (sx->early_pipe_active)
sx->pending_EHLO = TRUE;
else
{
if (sx->esmtp || sx->lmtp)
{
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (!sx->early_pipe_active)
#endif
{
sx->peer_offered = ehlo_response(sx->buffer,
0 /* no TLS */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
| (sx->lmtp && ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
| OPTION_DSN | OPTION_PIPE | OPTION_SIZE
| OPTION_CHUNKING | OPTION_PRDR | OPTION_UTF8
| (ob->size_addition >= 0 ? OPTION_SIZE : 0)
#endif
);
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (tls_out.active.sock >= 0)
sx->ehlo_resp.crypted_features = sx->peer_offered;
#endif
DEBUG(D_transport) debug_printf("%susing DSN\n",
sx->peer_offered & OPTION_DSN ? "" : "not ");
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if ( sx->early_pipe_ok
&& !sx->early_pipe_active
&& tls_out.active.sock >= 0
&& addrlist->prop.utf8_msg
&& !addrlist->prop.utf8_downcvt
)
- Ustrcpy(p, " SMTPUTF8"), p += 9;
+ Ustrcpy(p, US" SMTPUTF8"), p += 9;
#endif
/* check if all addresses have DSN-lasthop flag; do not send RET and ENVID if so */
if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop)
{
if (dsn_ret == dsn_ret_hdrs)
- { Ustrcpy(p, " RET=HDRS"); p += 9; }
+ { Ustrcpy(p, US" RET=HDRS"); p += 9; }
else if (dsn_ret == dsn_ret_full)
- { Ustrcpy(p, " RET=FULL"); p += 9; }
+ { Ustrcpy(p, US" RET=FULL"); p += 9; }
if (dsn_envid)
{
{
BOOL first = TRUE;
- Ustrcpy(p, " NOTIFY=");
+ Ustrcpy(p, US" NOTIFY=");
while (*p) p++;
for (int i = 0; i < nelem(rf_list); i++) if (addr->dsn_flags & rf_list[i])
{
case -2: return -2; /* non-MAIL read i/o error */
default: return -1; /* any MAIL error */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
case -4: return -1; /* non-2xx for pipelined banner or EHLO */
case -5: return -1; /* TLS first-read error */
#endif
bufsiz size of buffer
pfd pipe filedescriptor array; [0] is comms to proxied process
timeout per-read timeout, seconds
+
+Does not return.
*/
void
_exit(rc < 0 ? EXIT_FAILURE : EXIT_SUCCESS);
}
-if (f.running_in_test_harness) millisleep(100); /* let parent debug out */
+testharness_pause_ms(100); /* let parent debug out */
set_process_info("proxying TLS connection for continued transport");
FD_ZERO(&rfds);
FD_SET(tls_out.active.sock, &rfds);
}
done:
- if (f.running_in_test_harness) millisleep(100); /* let logging complete */
+ testharness_pause_ms(100); /* let logging complete */
exim_exit(0, US"TLS proxy");
}
#endif
uschar *message = NULL;
uschar new_message_id[MESSAGE_ID_LENGTH + 1];
-smtp_context sx;
+smtp_context * sx = store_get(sizeof(*sx), TRUE); /* tainted, for the data buffers */
gettimeofday(&start_delivery_time, NULL);
suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */
*message_defer = FALSE;
-sx.addrlist = addrlist;
-sx.conn_args.host = host;
-sx.conn_args.host_af = host_af,
-sx.port = defport;
-sx.conn_args.interface = interface;
-sx.helo_data = NULL;
-sx.conn_args.tblock = tblock;
-sx.verify = FALSE;
-sx.sync_addr = sx.first_addr = addrlist;
+sx->addrlist = addrlist;
+sx->conn_args.host = host;
+sx->conn_args.host_af = host_af,
+sx->port = defport;
+sx->conn_args.interface = interface;
+sx->helo_data = NULL;
+sx->conn_args.tblock = tblock;
+sx->verify = FALSE;
+sx->sync_addr = sx->first_addr = addrlist;
/* Get the channel set up ready for a message (MAIL FROM being the next
SMTP command to send */
-if ((rc = smtp_setup_conn(&sx, suppress_tls)) != OK)
+if ((rc = smtp_setup_conn(sx, suppress_tls)) != OK)
return rc;
/* If there is a filter command specified for this transport, we can now
if ( transport_filter_argv
&& *transport_filter_argv
&& **transport_filter_argv
- && sx.peer_offered & OPTION_CHUNKING
+ && sx->peer_offered & OPTION_CHUNKING
+#ifndef DISABLE_DKIM
+ /* When dkim signing, chunking is handled even with a transport-filter */
+ && !(ob->dkim.dkim_private_key && ob->dkim.dkim_domain && ob->dkim.dkim_selector)
+ && !ob->dkim.force_bodyhash
+#endif
)
{
- sx.peer_offered &= ~OPTION_CHUNKING;
+ sx->peer_offered &= ~OPTION_CHUNKING;
DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n");
}
}
transaction to handle. */
SEND_MESSAGE:
-sx.from_addr = return_path;
-sx.sync_addr = sx.first_addr;
-sx.ok = FALSE;
-sx.send_rset = TRUE;
-sx.completed_addr = FALSE;
+sx->from_addr = return_path;
+sx->sync_addr = sx->first_addr;
+sx->ok = FALSE;
+sx->send_rset = TRUE;
+sx->completed_addr = FALSE;
/* If we are a continued-connection-after-verify the MAIL and RCPT
if (continue_hostname && continue_sequence == 1)
{
- sx.peer_offered = smtp_peer_options;
- sx.pending_MAIL = FALSE;
- sx.ok = TRUE;
- sx.next_addr = NULL;
+ sx->peer_offered = smtp_peer_options;
+ sx->pending_MAIL = FALSE;
+ sx->ok = TRUE;
+ sx->next_addr = NULL;
for (address_item * addr = addrlist; addr; addr = addr->next)
addr->transport_return = PENDING_OK;
{
/* Initiate a message transfer. */
- switch(smtp_write_mail_and_rcpt_cmds(&sx, &yield))
+ switch(smtp_write_mail_and_rcpt_cmds(sx, &yield))
{
case 0: break;
case -1: case -2: goto RESPONSE_FAILED;
address_item * a;
unsigned cnt;
- for (a = sx.first_addr, cnt = 0; a && cnt < sx.max_rcpt; a = a->next, cnt++)
+ for (a = sx->first_addr, cnt = 0; a && cnt < sx->max_rcpt; a = a->next, cnt++)
if (a->transport_return != PENDING_OK)
{
/*XXX could we find a better errno than 0 here? */
set_errno_nohost(addrlist, 0, a->message, FAIL,
testflag(a, af_pass_message));
- sx.ok = FALSE;
+ sx->ok = FALSE;
break;
}
}
If using CHUNKING, do not send a BDAT until we know how big a chunk we want
to send is. */
-if ( !(sx.peer_offered & OPTION_CHUNKING)
- && (sx.ok || (pipelining_active && !mua_wrapper)))
+if ( !(sx->peer_offered & OPTION_CHUNKING)
+ && (sx->ok || (pipelining_active && !mua_wrapper)))
{
- int count = smtp_write_command(&sx, SCMD_FLUSH, "DATA\r\n");
+ int count = smtp_write_command(sx, SCMD_FLUSH, "DATA\r\n");
if (count < 0) goto SEND_FAILED;
- switch(sync_responses(&sx, count, sx.ok ? +1 : -1))
+ switch(sync_responses(sx, count, sx->ok ? +1 : -1))
{
- case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */
- case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */
+ case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
break;
- case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
- if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */
+ case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!sx->lmtp) sx->completed_addr = TRUE; /* can't tell about progress yet */
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: goto END_OFF; /* Timeout on RCPT */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
case -5: /* TLS first-read error */
case -4: HDEBUG(D_transport)
debug_printf("failed reaping pipelined cmd responses\n");
well as body. Set the appropriate timeout value to be used for each chunk.
(Haven't been able to make it work using select() for writing yet.) */
-if (!(sx.peer_offered & OPTION_CHUNKING) && !sx.ok)
+if ( !sx->ok
+ && (!(sx->peer_offered & OPTION_CHUNKING) || !pipelining_active))
{
/* Save the first address of the next batch. */
- sx.first_addr = sx.next_addr;
+ sx->first_addr = sx->next_addr;
- sx.ok = TRUE;
+ sx->ok = TRUE;
}
else
{
transport_ctx tctx = {
- .u = {.fd = sx.cctx.sock}, /*XXX will this need TLS info? */
+ .u = {.fd = sx->cctx.sock}, /*XXX will this need TLS info? */
.tblock = tblock,
.addr = addrlist,
.check_string = US".",
of responses. The callback needs a whole bunch of state so set up
a transport-context structure to be passed around. */
- if (sx.peer_offered & OPTION_CHUNKING)
+ if (sx->peer_offered & OPTION_CHUNKING)
{
tctx.check_string = tctx.escape_string = NULL;
tctx.options |= topt_use_bdat;
tctx.chunk_cb = smtp_chunk_cmd_callback;
- sx.pending_BDAT = FALSE;
- sx.good_RCPT = sx.ok;
- sx.cmd_count = 0;
- tctx.smtp_context = &sx;
+ sx->pending_BDAT = FALSE;
+ sx->good_RCPT = sx->ok;
+ sx->cmd_count = 0;
+ tctx.smtp_context = sx;
}
else
tctx.options |= topt_end_dot;
/* Save the first address of the next batch. */
- sx.first_addr = sx.next_addr;
+ sx->first_addr = sx->next_addr;
/* Responses from CHUNKING commands go in buffer. Otherwise,
there has not been a response. */
- sx.buffer[0] = 0;
+ sx->buffer[0] = 0;
sigalrm_seen = FALSE;
transport_write_timeout = ob->data_timeout;
smtp_command = US"sending data block"; /* For error messages */
DEBUG(D_transport|D_v)
- if (sx.peer_offered & OPTION_CHUNKING)
+ if (sx->peer_offered & OPTION_CHUNKING)
debug_printf(" will write message using CHUNKING\n");
else
debug_printf(" SMTP>> writing message and terminating \".\"\n");
transport_count = 0;
#ifndef DISABLE_DKIM
+ {
+# ifdef MEASURE_TIMING
+ struct timeval t0;
+ gettimeofday(&t0, NULL);
+# endif
dkim_exim_sign_init();
# ifdef EXPERIMENTAL_ARC
{
if (!f.expand_string_forcedfail)
{
message = US"failed to expand arc_sign";
- sx.ok = FALSE;
+ sx->ok = FALSE;
goto SEND_FAILED;
}
}
}
}
# endif
- sx.ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message);
+# ifdef MEASURE_TIMING
+ report_time_since(&t0, US"dkim_exim_sign_init (delta)");
+# endif
+ }
+ sx->ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message);
#else
- sx.ok = transport_write_message(&tctx, 0);
+ sx->ok = transport_write_message(&tctx, 0);
#endif
/* transport_write_message() uses write() because it is called from other
or the failure of a transport filter or the expansion of added headers.
Or, when CHUNKING, it can be a protocol-detected failure. */
- if (!sx.ok)
+ if (!sx->ok)
if (message) goto SEND_FAILED;
else goto RESPONSE_FAILED;
smtp_command = US"end of data";
- if (sx.peer_offered & OPTION_CHUNKING && sx.cmd_count > 1)
+ if (sx->peer_offered & OPTION_CHUNKING && sx->cmd_count > 1)
{
/* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
- switch(sync_responses(&sx, sx.cmd_count-1, 0))
+ switch(sync_responses(sx, sx->cmd_count-1, 0))
{
- case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */
- case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */
+ case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
break;
- case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
- if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */
+ case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!sx->lmtp) sx->completed_addr = TRUE; /* can't tell about progress yet */
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: goto END_OFF; /* Timeout on RCPT */
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
case -5: /* TLS first-read error */
case -4: HDEBUG(D_transport)
debug_printf("failed reaping pipelined cmd responses\n");
individual responses, before going on with the overall response. If we don't
get the warning then deal with per non-PRDR. */
- if(sx.prdr_active)
+ if(sx->prdr_active)
{
- sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '3', ob->final_timeout);
- if (!sx.ok && errno == 0) switch(sx.buffer[0])
+ sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '3', ob->final_timeout);
+ if (!sx->ok && errno == 0) switch(sx->buffer[0])
{
- case '2': sx.prdr_active = FALSE;
- sx.ok = TRUE;
+ case '2': sx->prdr_active = FALSE;
+ sx->ok = TRUE;
break;
case '4': errno = ERRNO_DATA4XX;
addrlist->more_errno |=
- ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8;
+ ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
break;
}
}
/* For non-PRDR SMTP, we now read a single response that applies to the
whole message. If it is OK, then all the addresses have been delivered. */
- if (!sx.lmtp)
+ if (!sx->lmtp)
{
- sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2',
+ sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
ob->final_timeout);
- if (!sx.ok && errno == 0 && sx.buffer[0] == '4')
+ if (!sx->ok && errno == 0 && sx->buffer[0] == '4')
{
errno = ERRNO_DATA4XX;
- addrlist->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8;
+ addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
}
software before the spool gets updated. Also record the final SMTP
confirmation if needed (for SMTP only). */
- if (sx.ok)
+ if (sx->ok)
{
int flag = '=';
struct timeval delivery_time;
uschar * conf = NULL;
timesince(&delivery_time, &start_delivery_time);
- sx.send_rset = FALSE;
+ sx->send_rset = FALSE;
pipelining_active = FALSE;
/* Set up confirmation if needed - applies only to SMTP */
#ifdef DISABLE_EVENT
LOGGING(smtp_confirmation) &&
#endif
- !sx.lmtp
+ !sx->lmtp
)
{
- const uschar *s = string_printing(sx.buffer);
+ const uschar *s = string_printing(sx->buffer);
/* deconst cast ok here as string_printing was checked to have alloc'n'copied */
- conf = (s == sx.buffer)? US string_copy(s) : US s;
+ conf = (s == sx->buffer)? US string_copy(s) : US s;
}
/* Process all transported addresses - for LMTP or PRDR, read a status for
each one. */
- for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next)
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
{
if (addr->transport_return != PENDING_OK) continue;
it doesn't get tried again too soon. */
#ifndef DISABLE_PRDR
- if (sx.lmtp || sx.prdr_active)
+ if (sx->lmtp || sx->prdr_active)
#else
- if (sx.lmtp)
+ if (sx->lmtp)
#endif
{
- if (!smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2',
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
ob->final_timeout))
{
- if (errno != 0 || sx.buffer[0] == 0) goto RESPONSE_FAILED;
+ if (errno != 0 || sx->buffer[0] == 0) goto RESPONSE_FAILED;
addr->message = string_sprintf(
#ifndef DISABLE_PRDR
- "%s error after %s: %s", sx.prdr_active ? "PRDR":"LMTP",
+ "%s error after %s: %s", sx->prdr_active ? "PRDR":"LMTP",
#else
"LMTP error after %s: %s",
#endif
- data_command, string_printing(sx.buffer));
+ data_command, string_printing(sx->buffer));
setflag(addr, af_pass_message); /* Allow message to go to user */
- if (sx.buffer[0] == '5')
+ if (sx->buffer[0] == '5')
addr->transport_return = FAIL;
else
{
errno = ERRNO_DATA4XX;
- addr->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8;
+ addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
addr->transport_return = DEFER;
#ifndef DISABLE_PRDR
- if (!sx.prdr_active)
+ if (!sx->prdr_active)
#endif
retry_add_item(addr, addr->address_retry_key, 0);
}
continue;
}
- sx.completed_addr = TRUE; /* NOW we can set this flag */
+ sx->completed_addr = TRUE; /* NOW we can set this flag */
if (LOGGING(smtp_confirmation))
{
- const uschar *s = string_printing(sx.buffer);
+ const uschar *s = string_printing(sx->buffer);
/* deconst cast ok here as string_printing was checked to have alloc'n'copied */
- conf = (s == sx.buffer) ? US string_copy(s) : US s;
+ conf = (s == sx->buffer) ? US string_copy(s) : US s;
}
}
if (tcp_out_fastopen >= TFO_USED_NODATA) setflag(addr, af_tcp_fastopen);
if (tcp_out_fastopen >= TFO_USED_DATA) setflag(addr, af_tcp_fastopen_data);
}
- if (sx.pipelining_used) setflag(addr, af_pipelining);
-#ifdef EXPERIMENTAL_PIPE_CONNECT
- if (sx.early_pipe_active) setflag(addr, af_early_pipe);
+ if (sx->pipelining_used) setflag(addr, af_pipelining);
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active) setflag(addr, af_early_pipe);
#endif
#ifndef DISABLE_PRDR
- if (sx.prdr_active) setflag(addr, af_prdr_used);
+ if (sx->prdr_active) setflag(addr, af_prdr_used);
#endif
- if (sx.peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used);
+ if (sx->peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used);
flag = '-';
#ifndef DISABLE_PRDR
- if (!sx.prdr_active)
+ if (!sx->prdr_active)
#endif
{
/* Update the journal. For homonymic addresses, use the base address plus
write error, as it may prove possible to update the spool file later. */
if (testflag(addr, af_homonym))
- sprintf(CS sx.buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ sprintf(CS sx->buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
else
- sprintf(CS sx.buffer, "%.500s\n", addr->unique);
+ sprintf(CS sx->buffer, "%.500s\n", addr->unique);
- DEBUG(D_deliver) debug_printf("S:journalling %s\n", sx.buffer);
- len = Ustrlen(CS sx.buffer);
- if (write(journal_fd, sx.buffer, len) != len)
+ DEBUG(D_deliver) debug_printf("S:journalling %s\n", sx->buffer);
+ len = Ustrlen(CS sx->buffer);
+ if (write(journal_fd, sx->buffer, len) != len)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
- "%s: %s", sx.buffer, strerror(errno));
+ "%s: %s", sx->buffer, strerror(errno));
}
}
#ifndef DISABLE_PRDR
- if (sx.prdr_active)
+ if (sx->prdr_active)
{
const uschar * overall_message;
/* PRDR - get the final, overall response. For any non-success
upgrade all the address statuses. */
- sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2',
+ sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
ob->final_timeout);
- if (!sx.ok)
+ if (!sx->ok)
{
- if(errno == 0 && sx.buffer[0] == '4')
+ if(errno == 0 && sx->buffer[0] == '4')
{
errno = ERRNO_DATA4XX;
- addrlist->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8;
+ addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
- for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next)
- if (sx.buffer[0] == '5' || addr->transport_return == OK)
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
+ if (sx->buffer[0] == '5' || addr->transport_return == OK)
addr->transport_return = PENDING_OK; /* allow set_errno action */
goto RESPONSE_FAILED;
}
/* Append the overall response to the individual PRDR response for logging
and update the journal, or setup retry. */
- overall_message = string_printing(sx.buffer);
- for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next)
+ overall_message = string_printing(sx->buffer);
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
if (addr->transport_return == OK)
addr->message = string_sprintf("%s\\n%s", addr->message, overall_message);
- for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next)
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
if (addr->transport_return == OK)
{
if (testflag(addr, af_homonym))
- sprintf(CS sx.buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ sprintf(CS sx->buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
else
- sprintf(CS sx.buffer, "%.500s\n", addr->unique);
+ sprintf(CS sx->buffer, "%.500s\n", addr->unique);
- DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", sx.buffer);
- len = Ustrlen(CS sx.buffer);
- if (write(journal_fd, sx.buffer, len) != len)
+ DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", sx->buffer);
+ len = Ustrlen(CS sx->buffer);
+ if (write(journal_fd, sx->buffer, len) != len)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
- "%s: %s", sx.buffer, strerror(errno));
+ "%s: %s", sx->buffer, strerror(errno));
}
else if (addr->transport_return == DEFER)
retry_add_item(addr, addr->address_retry_key, -2);
here during the setting up phase (i.e. before MAIL FROM) then always defer, as
the problem is not related to this specific message. */
-if (!sx.ok)
+if (!sx->ok)
{
int code, set_rc;
uschar * set_message;
{
save_errno = errno;
message = NULL;
- sx.send_quit = check_response(host, &save_errno, addrlist->more_errno,
- sx.buffer, &code, &message, &pass_message);
+ sx->send_quit = check_response(host, &save_errno, addrlist->more_errno,
+ sx->buffer, &code, &message, &pass_message);
goto FAILED;
}
code = '4';
message = string_sprintf("send() to %s [%s] failed: %s",
host->name, host->address, message ? message : US strerror(save_errno));
- sx.send_quit = FALSE;
+ sx->send_quit = FALSE;
goto FAILED;
}
{
BOOL message_error;
- sx.ok = FALSE; /* For when reached by GOTO */
+ sx->ok = FALSE; /* For when reached by GOTO */
set_message = message;
/* We want to handle timeouts after MAIL or "." and loss of connection after
if (save_errno > 0)
message = US string_sprintf("%s: %s", message, strerror(save_errno));
- write_logs(host, message, sx.first_addr ? sx.first_addr->basic_errno : 0);
+ write_logs(host, message, sx->first_addr ? sx->first_addr->basic_errno : 0);
*message_defer = TRUE;
}
else
{
-#ifdef EXPERIMENTAL_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
/* If we were early-pipelinng and the actual EHLO response did not match
the cached value we assumed, we could have detected it and passed a
custom errno through to here. It would be nice to RSET and retry right
set_errno(addrlist, save_errno, set_message, set_rc, pass_message, host
#ifdef EXPERIMENTAL_DSN_INFO
- , sx.smtp_greeting, sx.helo_response
+ , sx->smtp_greeting, sx->helo_response
#endif
);
}
DEBUG(D_transport)
debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d "
- "yield=%d first_address is %sNULL\n", sx.ok, sx.send_quit,
- sx.send_rset, f.continue_more, yield, sx.first_addr ? "not " : "");
+ "yield=%d first_address is %sNULL\n", sx->ok, sx->send_quit,
+ sx->send_rset, f.continue_more, yield, sx->first_addr ? "not " : "");
-if (sx.completed_addr && sx.ok && sx.send_quit)
+if (sx->completed_addr && sx->ok && sx->send_quit)
{
BOOL more;
smtp_compare_t t_compare;
t_compare.tblock = tblock;
t_compare.current_sender_address = sender_address;
- if ( sx.first_addr != NULL
+ if ( sx->first_addr != NULL
|| f.continue_more
|| (
#ifndef DISABLE_TLS
uschar *msg;
BOOL pass_message;
- if (sx.send_rset)
- if (! (sx.ok = smtp_write_command(&sx, SCMD_FLUSH, "RSET\r\n") >= 0))
+ if (sx->send_rset)
+ if (! (sx->ok = smtp_write_command(sx, SCMD_FLUSH, "RSET\r\n") >= 0))
{
msg = US string_sprintf("send() to %s [%s] failed: %s", host->name,
host->address, strerror(errno));
- sx.send_quit = FALSE;
+ sx->send_quit = FALSE;
}
- else if (! (sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer),
+ else if (! (sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
'2', ob->command_timeout)))
{
int code;
- sx.send_quit = check_response(host, &errno, 0, sx.buffer, &code, &msg,
+ sx->send_quit = check_response(host, &errno, 0, sx->buffer, &code, &msg,
&pass_message);
- if (!sx.send_quit)
+ if (!sx->send_quit)
{
DEBUG(D_transport) debug_printf("H=%s [%s] %s\n",
host->name, host->address, msg);
/* Either RSET was not needed, or it succeeded */
- if (sx.ok)
+ if (sx->ok)
{
#ifndef DISABLE_TLS
int pfd[2];
#endif
- int socket_fd = sx.cctx.sock;
+ int socket_fd = sx->cctx.sock;
- if (sx.first_addr != NULL) /* More addresses still to be sent */
+ if (sx->first_addr != NULL) /* More addresses still to be sent */
{ /* in this run of the transport */
continue_sequence++; /* Causes * in logging */
goto SEND_MESSAGE;
a new EHLO. If we don't get a good response, we don't attempt to pass
the socket on. */
- tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_WAIT);
- sx.cctx.tls_ctx = NULL;
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_WAIT);
+ sx->cctx.tls_ctx = NULL;
smtp_peer_options = smtp_peer_options_wrap;
- sx.ok = !sx.smtps
- && smtp_write_command(&sx, SCMD_FLUSH, "EHLO %s\r\n", sx.helo_data)
+ sx->ok = !sx->smtps
+ && smtp_write_command(sx, SCMD_FLUSH, "EHLO %s\r\n", sx->helo_data)
>= 0
- && smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer),
+ && smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
'2', ob->command_timeout);
- if (sx.ok && f.continue_more)
+ if (sx->ok && f.continue_more)
return yield; /* More addresses for another run */
}
else
/* Set up a pipe for proxying TLS for the new transport process */
smtp_peer_options |= OPTION_TLS;
- if (sx.ok = (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0))
+ if ((sx->ok = socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0))
socket_fd = pfd[1];
else
- set_errno(sx.first_addr, errno, US"internal allocation problem",
+ set_errno(sx->first_addr, errno, US"internal allocation problem",
DEFER, FALSE, host
# ifdef EXPERIMENTAL_DSN_INFO
- , sx.smtp_greeting, sx.helo_response
+ , sx->smtp_greeting, sx->helo_response
# endif
);
}
/*XXX DSN_INFO: assume likely to do new HELO; but for greet we'll want to
propagate it from the initial
*/
- if (sx.ok && transport_pass_socket(tblock->name, host->name,
+ if (sx->ok && transport_pass_socket(tblock->name, host->name,
host->address, new_message_id, socket_fd))
{
- sx.send_quit = FALSE;
+ sx->send_quit = FALSE;
/* We have passed the client socket to a fresh transport process.
If TLS is still active, we need to proxy it for the transport we
int pid = fork();
if (pid == 0) /* child; fork again to disconnect totally */
{
- if (f.running_in_test_harness) millisleep(100); /* let parent debug out */
+ testharness_pause_ms(100); /* let parent debug out */
/* does not return */
- smtp_proxy_tls(sx.cctx.tls_ctx, sx.buffer, sizeof(sx.buffer), pfd,
+ smtp_proxy_tls(sx->cctx.tls_ctx, sx->buffer, sizeof(sx->buffer), pfd,
ob->command_timeout);
}
close(pfd[0]);
/* tidy the inter-proc to disconn the proxy proc */
waitpid(pid, NULL, 0);
- tls_close(sx.cctx.tls_ctx, TLS_NO_SHUTDOWN);
- sx.cctx.tls_ctx = NULL;
- (void)close(sx.cctx.sock);
- sx.cctx.sock = -1;
+ tls_close(sx->cctx.tls_ctx, TLS_NO_SHUTDOWN);
+ sx->cctx.tls_ctx = NULL;
+ (void)close(sx->cctx.sock);
+ sx->cctx.sock = -1;
continue_transport = NULL;
continue_hostname = NULL;
return yield;
/* If RSET failed and there are addresses left, they get deferred. */
else
- set_errno(sx.first_addr, errno, msg, DEFER, FALSE, host
+ set_errno(sx->first_addr, errno, msg, DEFER, FALSE, host
#ifdef EXPERIMENTAL_DSN_INFO
- , sx.smtp_greeting, sx.helo_response
+ , sx->smtp_greeting, sx->helo_response
#endif
);
}
SEND_QUIT:
#ifdef TCP_CORK
-(void) setsockopt(sx.cctx.sock, IPPROTO_TCP, TCP_CORK, US &on, sizeof(on));
+(void) setsockopt(sx->cctx.sock, IPPROTO_TCP, TCP_CORK, US &on, sizeof(on));
#endif
-if (sx.send_quit) (void)smtp_write_command(&sx, SCMD_FLUSH, "QUIT\r\n");
+if (sx->send_quit) (void)smtp_write_command(sx, SCMD_FLUSH, "QUIT\r\n");
END_OFF:
#ifndef DISABLE_TLS
-tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
-sx.cctx.tls_ctx = NULL;
+tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+sx->cctx.tls_ctx = NULL;
#endif
/* Close the socket, and return the appropriate value, first setting
case continue_more won't get set. */
HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
-if (sx.send_quit)
+if (sx->send_quit)
{
- shutdown(sx.cctx.sock, SHUT_WR);
- millisleep(f.running_in_test_harness ? 200 : 20);
- if (fcntl(sx.cctx.sock, F_SETFL, O_NONBLOCK) == 0)
- for (int i = 16; read(sx.cctx.sock, sx.inbuffer, sizeof(sx.inbuffer)) > 0 && i > 0;)
+ shutdown(sx->cctx.sock, SHUT_WR);
+ millisleep(20);
+ testharness_pause_ms(200);
+ if (fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0)
+ for (int i = 16; read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && i > 0;)
i--; /* drain socket */
}
-(void)close(sx.cctx.sock);
+(void)close(sx->cctx.sock);
#ifndef DISABLE_EVENT
(void) event_raise(tblock->event_action, US"tcp:close", NULL);
addr->peercert = NULL;
addr->peerdn = NULL;
addr->ocsp = OCSP_NOT_REQ;
+ addr->tlsver = NULL;
#endif
#ifdef EXPERIMENTAL_DSN_INFO
addr->smtp_greeting = NULL;
else
if (ob->hosts_randomize) s = expanded_hosts = string_copy(s);
+ if (is_tainted(s))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "attempt to use tainted host list '%s' from '%s' in transport %s",
+ s, ob->hosts, tblock->name);
+ /* Avoid leaking info to an attacker */
+ addrlist->message = US"internal configuration error";
+ addrlist->transport_return = PANIC;
+ return FALSE;
+ }
+
host_build_hostlist(&hostlist, s, ob->hosts_randomize);
/* Check that the expansion yielded something useful. */
{
for (address_item * addr = addrlist; addr; addr = addr->next)
{
- addr->basic_errno = 0;
+ addr->basic_errno = ERRNO_HOST_IS_LOCAL;
addr->message = string_sprintf("%s transport found host %s to be "
"local", tblock->name, host->name);
}
if (expanded_hosts)
{
- thost = store_get(sizeof(host_item));
+ thost = store_get(sizeof(host_item), FALSE);
*thost = *host;
thost->name = string_copy(host->name);
thost->address = string_copy(host->address);
ob->hosts_max_try_hardlimit);
}
- if (f.running_in_test_harness) millisleep(500); /* let server debug out */
+ testharness_pause_ms(500); /* let server debug out */
} /* End of loop for trying multiple hosts. */
/* If we failed to find a matching host in the list, for an already-open