X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/fd6e2d18420f43b0c956d943024cb462e1af6aa6..c58803fd11185cbcf673e99cebf8397c9194357a:/src/src/transports/smtp.c diff --git a/src/src/transports/smtp.c b/src/src/transports/smtp.c index 5c7b440c1..b8073b069 100644 --- a/src/src/transports/smtp.c +++ b/src/src/transports/smtp.c @@ -8,6 +8,10 @@ #include "../exim.h" #include "smtp.h" +#if defined(SUPPORT_DANE) && defined(DISABLE_TLS) +# error TLS is required for DANE +#endif + /* Options specific to the smtp transport. This transport also supports LMTP over TCP/IP. The options must be in alphabetic order (note that "_" comes @@ -106,7 +110,7 @@ optionlist smtp_transport_options[] = { #endif { "hosts_override", opt_bool, (void *)offsetof(smtp_transport_options_block, hosts_override) }, -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT { "hosts_pipe_connect", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_pipe_connect) }, #endif @@ -256,7 +260,7 @@ smtp_transport_options_block smtp_transport_option_defaults = { .hosts_avoid_tls = NULL, .hosts_verify_avoid_tls = NULL, .hosts_avoid_pipelining = NULL, -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT .hosts_pipe_connect = NULL, #endif .hosts_avoid_esmtp = NULL, @@ -277,7 +281,7 @@ smtp_transport_options_block smtp_transport_option_defaults = { .gethostbyname = FALSE, .dns_qualify_single = TRUE, .dns_search_parents = FALSE, - .dnssec = { .request=NULL, .require=NULL }, + .dnssec = { .request= US"*", .require=NULL }, .delay_after_cutoff = TRUE, .hosts_override = FALSE, .hosts_randomize = FALSE, @@ -353,6 +357,51 @@ static BOOL pipelining_active; /* current transaction is in pipe mode */ static unsigned ehlo_response(uschar * buf, unsigned checks); +/******************************************************************************/ + +void +smtp_deliver_init(void) +{ +if (!regex_PIPELINING) regex_PIPELINING = + regex_must_compile(US"\\n250[\\s\\-]PIPELINING(\\s|\\n|$)", FALSE, TRUE); + +if (!regex_SIZE) regex_SIZE = + regex_must_compile(US"\\n250[\\s\\-]SIZE(\\s|\\n|$)", FALSE, TRUE); + +if (!regex_AUTH) regex_AUTH = + regex_must_compile(AUTHS_REGEX, FALSE, TRUE); + +#ifndef DISABLE_TLS +if (!regex_STARTTLS) regex_STARTTLS = + regex_must_compile(US"\\n250[\\s\\-]STARTTLS(\\s|\\n|$)", FALSE, TRUE); +#endif + +if (!regex_CHUNKING) regex_CHUNKING = + regex_must_compile(US"\\n250[\\s\\-]CHUNKING(\\s|\\n|$)", FALSE, TRUE); + +#ifndef DISABLE_PRDR +if (!regex_PRDR) regex_PRDR = + regex_must_compile(US"\\n250[\\s\\-]PRDR(\\s|\\n|$)", FALSE, TRUE); +#endif + +#ifdef SUPPORT_I18N +if (!regex_UTF8) regex_UTF8 = + regex_must_compile(US"\\n250[\\s\\-]SMTPUTF8(\\s|\\n|$)", FALSE, TRUE); +#endif + +if (!regex_DSN) regex_DSN = + regex_must_compile(US"\\n250[\\s\\-]DSN(\\s|\\n|$)", FALSE, TRUE); + +if (!regex_IGNOREQUOTA) regex_IGNOREQUOTA = + regex_must_compile(US"\\n250[\\s\\-]IGNOREQUOTA(\\s|\\n|$)", FALSE, TRUE); + +#ifndef DISABLE_PIPE_CONNECT +if (!regex_EARLY_PIPE) regex_EARLY_PIPE = + regex_must_compile(US"\\n250[\\s\\-]" EARLY_PIPE_FEATURE_NAME "(\\s|\\n|$)", FALSE, TRUE); +#endif +} + + /************************************************* * Setup entry point * *************************************************/ @@ -620,7 +669,7 @@ switch(*errno_value) return FALSE; case ERRNO_WRITEINCOMPLETE: /* failure to write a complete data block */ - *message = string_sprintf("failed to write a data block"); + *message = US"failed to write a data block"; return FALSE; #ifdef SUPPORT_I18N @@ -810,12 +859,16 @@ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', #ifdef EXPERIMENTAL_DSN_INFO sx->helo_response = string_copy(sx->buffer); #endif +#ifndef DISABLE_EVENT +(void) event_raise(sx->conn_args.tblock->event_action, + US"smtp:ehlo", sx->buffer); +#endif return TRUE; } -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT static uschar * ehlo_cache_key(const smtp_context * sx) { @@ -1081,7 +1134,7 @@ address_item * addr = sx->sync_addr; smtp_transport_options_block * ob = sx->conn_args.ob; int yield = 0; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT int rc; if ((rc = smtp_reap_early_pipe(sx, &count)) != OK) return rc == FAIL ? -4 : -5; @@ -1184,8 +1237,14 @@ while (count-- > 0) else if (errno != 0 || sx->buffer[0] == 0) { - string_format(big_buffer, big_buffer_size, "RCPT TO:<%s>", + gstring gs = { .size = big_buffer_size, .ptr = 0, .s = big_buffer }, * g = &gs; + + /* Use taint-unchecked routines for writing into big_buffer, trusting + that we'll never expand it. */ + + g = string_fmt_append_f(g, SVFMT_TAINT_NOCHK, "RCPT TO:<%s>", transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes)); + string_from_gstring(g); return -2; } @@ -1397,7 +1456,7 @@ smtp_auth(smtp_context * sx) host_item * host = sx->conn_args.host; /* host to deliver to */ smtp_transport_options_block * ob = sx->conn_args.ob; /* transport options */ int require_auth = verify_check_given_host(CUSS &ob->hosts_require_auth, host); -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT unsigned short authbits = tls_out.active.sock >= 0 ? sx->ehlo_resp.crypted_auths : sx->ehlo_resp.cleartext_auths; #endif @@ -1413,7 +1472,7 @@ if (!regex_AUTH) if ( sx->esmtp && -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT sx->early_pipe_active ? authbits : #endif @@ -1423,7 +1482,7 @@ if ( sx->esmtp uschar * names = NULL; expand_nmax = -1; /* reset */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (!sx->early_pipe_active) #endif names = string_copyn(expand_nstring[1], expand_nlength[1]); @@ -1437,7 +1496,7 @@ if ( sx->esmtp DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n"); fail_reason = US"no common mechanisms were found"; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (sx->early_pipe_active) { /* Scan our authenticators (which support use by a client and were offered @@ -1555,20 +1614,20 @@ Globals f.smtp_authenticated Return True on error, otherwise buffer has (possibly empty) terminated string */ -BOOL +static BOOL smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist, smtp_transport_options_block *ob) { -uschar *local_authenticated_sender = authenticated_sender; +uschar * local_authenticated_sender = authenticated_sender; #ifdef notdef debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, f.smtp_authenticated?"Y":"N"); #endif -if (ob->authenticated_sender != NULL) +if (ob->authenticated_sender) { uschar *new = expand_string(ob->authenticated_sender); - if (new == NULL) + if (!new) { if (!f.expand_string_forcedfail) { @@ -1578,17 +1637,17 @@ if (ob->authenticated_sender != NULL) return TRUE; } } - else if (new[0] != 0) local_authenticated_sender = new; + else if (*new) local_authenticated_sender = new; } /* Add the authenticated sender address if present */ -if ((f.smtp_authenticated || ob->authenticated_sender_force) && - local_authenticated_sender != NULL) +if ( (f.smtp_authenticated || ob->authenticated_sender_force) + && local_authenticated_sender) { - string_format(buffer, bufsize, " AUTH=%s", + string_format_nt(buffer, bufsize, " AUTH=%s", auth_xtextencode(local_authenticated_sender, - Ustrlen(local_authenticated_sender))); + Ustrlen(local_authenticated_sender))); client_authenticated_sender = string_copy(local_authenticated_sender); } else @@ -1599,77 +1658,6 @@ return FALSE; -#ifdef SUPPORT_DANE -/* Lookup TLSA record for host/port. -Return: OK success with dnssec; DANE mode - DEFER Do not use this host now, may retry later - FAIL_FORCED No TLSA record; DANE not usable - FAIL Do not use this connection -*/ - -int -tlsa_lookup(const host_item * host, dns_answer * dnsa, BOOL dane_required) -{ -/* move this out to host.c given the similarity to dns_lookup() ? */ -uschar buffer[300]; -const uschar * fullname = buffer; -int rc; -BOOL sec; - -/* TLSA lookup string */ -(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name); - -rc = dns_lookup(dnsa, buffer, T_TLSA, &fullname); -sec = dns_is_secure(dnsa); -DEBUG(D_transport) - debug_printf("TLSA lookup ret %d %sDNSSEC\n", rc, sec ? "" : "not "); - -switch (rc) - { - case DNS_AGAIN: - return DEFER; /* just defer this TLS'd conn */ - - case DNS_SUCCEED: - if (sec) - { - DEBUG(D_transport) - { - dns_scan dnss; - for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr; - rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)) - if (rr->type == T_TLSA && rr->size > 3) - { - uint16_t payload_length = rr->size - 3; - uschar s[MAX_TLSA_EXPANDED_SIZE], * sp = s, * p = US rr->data; - - sp += sprintf(CS sp, "%d ", *p++); /* usage */ - sp += sprintf(CS sp, "%d ", *p++); /* selector */ - sp += sprintf(CS sp, "%d ", *p++); /* matchtype */ - while (payload_length-- > 0 && sp-s < (MAX_TLSA_EXPANDED_SIZE - 4)) - sp += sprintf(CS sp, "%02x", *p++); - - debug_printf(" %s\n", s); - } - } - return OK; - } - log_write(0, LOG_MAIN, - "DANE error: TLSA lookup for %s not DNSSEC", host->name); - /*FALLTRHOUGH*/ - - case DNS_NODATA: /* no TLSA RR for this lookup */ - case DNS_NOMATCH: /* no records at all for this lookup */ - return dane_required ? FAIL : FAIL_FORCED; - - default: - case DNS_FAIL: - return dane_required ? FAIL : DEFER; - } -} -#endif - - - typedef struct smtp_compare_s { uschar *current_sender_address; @@ -1794,7 +1782,7 @@ if ( checks & OPTION_SIZE && pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) checks &= ~OPTION_SIZE; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if ( checks & OPTION_EARLY_PIPE && pcre_exec(regex_EARLY_PIPE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) @@ -1841,7 +1829,7 @@ there may be more writes (like, the chunk data) done soon. */ if (chunk_size > 0) { -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT BOOL new_conn = !!(sx->outblock.conn_args); #endif if((cmd_count = smtp_write_command(sx, @@ -1850,7 +1838,7 @@ if (chunk_size > 0) ) < 0) return ERROR; if (flags & tc_chunk_last) data_command = string_copy(big_buffer); /* Save for later error message */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT /* That command write could have been the one that made the connection. Copy the fd from the client conn ctx (smtp transport specific) to the generic transport ctx. */ @@ -1883,7 +1871,7 @@ if (flags & tc_reap_prev && prev_cmd_count > 0) case -5: errno = ERRNO_TLSFAILURE; return DEFER; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT case -4: /* non-2xx for pipelined banner or EHLO */ #endif case -1: /* Timeout on RCPT */ @@ -1953,7 +1941,6 @@ smtp_transport_options_block * ob = sx->conn_args.tblock->options_block; BOOL pass_message = FALSE; uschar * message = NULL; int yield = OK; -int rc; #ifndef DISABLE_TLS uschar * tls_errstr; #endif @@ -1977,7 +1964,7 @@ sx->conn_args.dane = FALSE; sx->dane_required = verify_check_given_host(CUSS &ob->hosts_require_dane, sx->conn_args.host) == OK; #endif -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT sx->early_pipe_active = sx->early_pipe_ok = FALSE; sx->ehlo_resp.cleartext_features = sx->ehlo_resp.crypted_features = 0; sx->pending_BANNER = sx->pending_EHLO = FALSE; @@ -2026,6 +2013,7 @@ tls_out.ocsp = OCSP_NOT_REQ; #ifdef EXPERIMENTAL_TLS_RESUME tls_out.resumption = 0; #endif +tls_out.ver = NULL; /* Flip the legacy TLS-related variables over to the outbound set in case they're used in the context of the transport. Don't bother resetting @@ -2064,6 +2052,7 @@ if (!continue_hostname) if (sx->conn_args.host->dnssec == DS_YES) { + int rc; if( sx->dane_required || verify_check_given_host(CUSS &ob->hosts_try_dane, sx->conn_args.host) == OK ) @@ -2105,7 +2094,7 @@ if (!continue_hostname) sx->inblock.cctx = sx->outblock.cctx = &sx->cctx; sx->avoid_option = sx->peer_offered = smtp_peer_options = 0; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if ( verify_check_given_host(CUSS &ob->hosts_pipe_connect, sx->conn_args.host) == OK) @@ -2180,7 +2169,7 @@ will be? Somehow I doubt it. */ if (!sx->smtps) { -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (sx->early_pipe_active) { sx->pending_BANNER = TRUE; /* sync_responses() must eventually handle */ @@ -2281,7 +2270,7 @@ goto SEND_QUIT; if (sx->esmtp) { if (smtp_write_command(sx, -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT sx->early_pipe_active ? SCMD_BUFFER : #endif SCMD_FLUSH, @@ -2289,7 +2278,7 @@ goto SEND_QUIT; goto SEND_FAILED; sx->esmtp_sent = TRUE; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (sx->early_pipe_active) { sx->pending_EHLO = TRUE; @@ -2322,7 +2311,7 @@ goto SEND_QUIT; DEBUG(D_transport) debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n"); -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (!sx->early_pipe_active) #endif if (!sx->esmtp) @@ -2357,13 +2346,13 @@ goto SEND_QUIT; if (sx->esmtp || sx->lmtp) { -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (!sx->early_pipe_active) #endif { sx->peer_offered = ehlo_response(sx->buffer, OPTION_TLS /* others checked later */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT | (sx->early_pipe_ok ? OPTION_IGNQ | OPTION_CHUNKING | OPTION_PRDR | OPTION_DSN | OPTION_PIPE | OPTION_SIZE @@ -2375,7 +2364,7 @@ goto SEND_QUIT; ) #endif ); -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (sx->early_pipe_ok) { sx->ehlo_resp.cleartext_features = sx->peer_offered; @@ -2468,7 +2457,7 @@ if ( smtp_peer_options & OPTION_TLS if (smtp_write_command(sx, SCMD_FLUSH, "STARTTLS\r\n") < 0) goto SEND_FAILED; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT /* If doing early-pipelining reap the banner and EHLO-response but leave the response for the STARTTLS we just sent alone. */ @@ -2545,6 +2534,7 @@ if ( smtp_peer_options & OPTION_TLS addr->peercert = tls_out.peercert; addr->peerdn = tls_out.peerdn; addr->ocsp = tls_out.ocsp; + addr->tlsver = tls_out.ver; } } } @@ -2572,7 +2562,7 @@ if (tls_out.active.sock >= 0) goto SEND_QUIT; } -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT /* For SMTPS there is no cleartext early-pipe; use the crypted permission bit. We're unlikely to get the group sent and delivered before the server sends its banner, but it's still worth sending as a group. @@ -2590,7 +2580,7 @@ if (tls_out.active.sock >= 0) /* For SMTPS we need to wait for the initial OK response. */ if (sx->smtps) -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (sx->early_pipe_active) { sx->pending_BANNER = TRUE; @@ -2613,14 +2603,14 @@ if (tls_out.active.sock >= 0) } if (smtp_write_command(sx, -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT sx->early_pipe_active ? SCMD_BUFFER : #endif SCMD_FLUSH, "%s %s\r\n", greeting_cmd, sx->helo_data) < 0) goto SEND_FAILED; -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (sx->early_pipe_active) sx->pending_EHLO = TRUE; else @@ -2685,13 +2675,13 @@ if (continue_hostname == NULL { if (sx->esmtp || sx->lmtp) { -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (!sx->early_pipe_active) #endif { sx->peer_offered = ehlo_response(sx->buffer, 0 /* no TLS */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT | (sx->lmtp && ob->lmtp_ignore_quota ? OPTION_IGNQ : 0) | OPTION_DSN | OPTION_PIPE | OPTION_SIZE | OPTION_CHUNKING | OPTION_PRDR | OPTION_UTF8 @@ -2712,7 +2702,7 @@ if (continue_hostname == NULL | (ob->size_addition >= 0 ? OPTION_SIZE : 0) #endif ); -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if (tls_out.active.sock >= 0) sx->ehlo_resp.crypted_features = sx->peer_offered; #endif @@ -2760,7 +2750,7 @@ if (continue_hostname == NULL DEBUG(D_transport) debug_printf("%susing DSN\n", sx->peer_offered & OPTION_DSN ? "" : "not "); -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT if ( sx->early_pipe_ok && !sx->early_pipe_active && tls_out.active.sock >= 0 @@ -3040,7 +3030,7 @@ if ( sx->peer_offered & OPTION_UTF8 && addrlist->prop.utf8_msg && !addrlist->prop.utf8_downcvt ) - Ustrcpy(p, " SMTPUTF8"), p += 9; + Ustrcpy(p, US" SMTPUTF8"), p += 9; #endif /* check if all addresses have DSN-lasthop flag; do not send RET and ENVID if so */ @@ -3061,9 +3051,9 @@ for (sx->dsn_all_lasthop = TRUE, addr = addrlist, address_count = 0; if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop) { if (dsn_ret == dsn_ret_hdrs) - { Ustrcpy(p, " RET=HDRS"); p += 9; } + { Ustrcpy(p, US" RET=HDRS"); p += 9; } else if (dsn_ret == dsn_ret_full) - { Ustrcpy(p, " RET=FULL"); p += 9; } + { Ustrcpy(p, US" RET=FULL"); p += 9; } if (dsn_envid) { @@ -3100,7 +3090,7 @@ if (sx->peer_offered & OPTION_DSN && !(addr->dsn_flags & rf_dsnlasthop)) { BOOL first = TRUE; - Ustrcpy(p, " NOTIFY="); + Ustrcpy(p, US" NOTIFY="); while (*p) p++; for (int i = 0; i < nelem(rf_list); i++) if (addr->dsn_flags & rf_list[i]) { @@ -3276,7 +3266,7 @@ for (addr = sx->first_addr, address_count = 0; case -2: return -2; /* non-MAIL read i/o error */ default: return -1; /* any MAIL error */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT case -4: return -1; /* non-2xx for pipelined banner or EHLO */ case -5: return -1; /* TLS first-read error */ #endif @@ -3307,6 +3297,8 @@ Arguments: bufsiz size of buffer pfd pipe filedescriptor array; [0] is comms to proxied process timeout per-read timeout, seconds + +Does not return. */ void @@ -3324,7 +3316,7 @@ if ((rc = fork())) _exit(rc < 0 ? EXIT_FAILURE : EXIT_SUCCESS); } -if (f.running_in_test_harness) millisleep(100); /* let parent debug out */ +testharness_pause_ms(100); /* let parent debug out */ set_process_info("proxying TLS connection for continued transport"); FD_ZERO(&rfds); FD_SET(tls_out.active.sock, &rfds); @@ -3398,7 +3390,7 @@ for (int fd_bits = 3; fd_bits; ) } done: - if (f.running_in_test_harness) millisleep(100); /* let logging complete */ + testharness_pause_ms(100); /* let logging complete */ exim_exit(0, US"TLS proxy"); } #endif @@ -3464,26 +3456,26 @@ BOOL pass_message = FALSE; uschar *message = NULL; uschar new_message_id[MESSAGE_ID_LENGTH + 1]; -smtp_context sx; +smtp_context * sx = store_get(sizeof(*sx), TRUE); /* tainted, for the data buffers */ gettimeofday(&start_delivery_time, NULL); suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */ *message_defer = FALSE; -sx.addrlist = addrlist; -sx.conn_args.host = host; -sx.conn_args.host_af = host_af, -sx.port = defport; -sx.conn_args.interface = interface; -sx.helo_data = NULL; -sx.conn_args.tblock = tblock; -sx.verify = FALSE; -sx.sync_addr = sx.first_addr = addrlist; +sx->addrlist = addrlist; +sx->conn_args.host = host; +sx->conn_args.host_af = host_af, +sx->port = defport; +sx->conn_args.interface = interface; +sx->helo_data = NULL; +sx->conn_args.tblock = tblock; +sx->verify = FALSE; +sx->sync_addr = sx->first_addr = addrlist; /* Get the channel set up ready for a message (MAIL FROM being the next SMTP command to send */ -if ((rc = smtp_setup_conn(&sx, suppress_tls)) != OK) +if ((rc = smtp_setup_conn(sx, suppress_tls)) != OK) return rc; /* If there is a filter command specified for this transport, we can now @@ -3509,10 +3501,15 @@ if (tblock->filter_command) if ( transport_filter_argv && *transport_filter_argv && **transport_filter_argv - && sx.peer_offered & OPTION_CHUNKING + && sx->peer_offered & OPTION_CHUNKING +#ifndef DISABLE_DKIM + /* When dkim signing, chunking is handled even with a transport-filter */ + && !(ob->dkim.dkim_private_key && ob->dkim.dkim_domain && ob->dkim.dkim_selector) + && !ob->dkim.force_bodyhash +#endif ) { - sx.peer_offered &= ~OPTION_CHUNKING; + sx->peer_offered &= ~OPTION_CHUNKING; DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n"); } } @@ -3526,11 +3523,11 @@ code was to use a goto to jump back to this point when there is another transaction to handle. */ SEND_MESSAGE: -sx.from_addr = return_path; -sx.sync_addr = sx.first_addr; -sx.ok = FALSE; -sx.send_rset = TRUE; -sx.completed_addr = FALSE; +sx->from_addr = return_path; +sx->sync_addr = sx->first_addr; +sx->ok = FALSE; +sx->send_rset = TRUE; +sx->completed_addr = FALSE; /* If we are a continued-connection-after-verify the MAIL and RCPT @@ -3540,10 +3537,10 @@ always has a sequence number greater than one. */ if (continue_hostname && continue_sequence == 1) { - sx.peer_offered = smtp_peer_options; - sx.pending_MAIL = FALSE; - sx.ok = TRUE; - sx.next_addr = NULL; + sx->peer_offered = smtp_peer_options; + sx->pending_MAIL = FALSE; + sx->ok = TRUE; + sx->next_addr = NULL; for (address_item * addr = addrlist; addr; addr = addr->next) addr->transport_return = PENDING_OK; @@ -3552,7 +3549,7 @@ else { /* Initiate a message transfer. */ - switch(smtp_write_mail_and_rcpt_cmds(&sx, &yield)) + switch(smtp_write_mail_and_rcpt_cmds(sx, &yield)) { case 0: break; case -1: case -2: goto RESPONSE_FAILED; @@ -3570,13 +3567,13 @@ else address_item * a; unsigned cnt; - for (a = sx.first_addr, cnt = 0; a && cnt < sx.max_rcpt; a = a->next, cnt++) + for (a = sx->first_addr, cnt = 0; a && cnt < sx->max_rcpt; a = a->next, cnt++) if (a->transport_return != PENDING_OK) { /*XXX could we find a better errno than 0 here? */ set_errno_nohost(addrlist, 0, a->message, FAIL, testflag(a, af_pass_message)); - sx.ok = FALSE; + sx->ok = FALSE; break; } } @@ -3590,25 +3587,25 @@ are pipelining. The responses are all handled by sync_responses(). If using CHUNKING, do not send a BDAT until we know how big a chunk we want to send is. */ -if ( !(sx.peer_offered & OPTION_CHUNKING) - && (sx.ok || (pipelining_active && !mua_wrapper))) +if ( !(sx->peer_offered & OPTION_CHUNKING) + && (sx->ok || (pipelining_active && !mua_wrapper))) { - int count = smtp_write_command(&sx, SCMD_FLUSH, "DATA\r\n"); + int count = smtp_write_command(sx, SCMD_FLUSH, "DATA\r\n"); if (count < 0) goto SEND_FAILED; - switch(sync_responses(&sx, count, sx.ok ? +1 : -1)) + switch(sync_responses(sx, count, sx->ok ? +1 : -1)) { - case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */ - case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */ + case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */ + case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */ break; - case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ - if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */ + case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ + if (!sx->lmtp) sx->completed_addr = TRUE; /* can't tell about progress yet */ case 0: break; /* No 2xx or 5xx, but no probs */ case -1: goto END_OFF; /* Timeout on RCPT */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT case -5: /* TLS first-read error */ case -4: HDEBUG(D_transport) debug_printf("failed reaping pipelined cmd responses\n"); @@ -3626,17 +3623,18 @@ for handling the SMTP dot-handling protocol, flagging to apply to headers as well as body. Set the appropriate timeout value to be used for each chunk. (Haven't been able to make it work using select() for writing yet.) */ -if (!(sx.peer_offered & OPTION_CHUNKING) && !sx.ok) +if ( !sx->ok + && (!(sx->peer_offered & OPTION_CHUNKING) || !pipelining_active)) { /* Save the first address of the next batch. */ - sx.first_addr = sx.next_addr; + sx->first_addr = sx->next_addr; - sx.ok = TRUE; + sx->ok = TRUE; } else { transport_ctx tctx = { - .u = {.fd = sx.cctx.sock}, /*XXX will this need TLS info? */ + .u = {.fd = sx->cctx.sock}, /*XXX will this need TLS info? */ .tblock = tblock, .addr = addrlist, .check_string = US".", @@ -3655,38 +3653,43 @@ else of responses. The callback needs a whole bunch of state so set up a transport-context structure to be passed around. */ - if (sx.peer_offered & OPTION_CHUNKING) + if (sx->peer_offered & OPTION_CHUNKING) { tctx.check_string = tctx.escape_string = NULL; tctx.options |= topt_use_bdat; tctx.chunk_cb = smtp_chunk_cmd_callback; - sx.pending_BDAT = FALSE; - sx.good_RCPT = sx.ok; - sx.cmd_count = 0; - tctx.smtp_context = &sx; + sx->pending_BDAT = FALSE; + sx->good_RCPT = sx->ok; + sx->cmd_count = 0; + tctx.smtp_context = sx; } else tctx.options |= topt_end_dot; /* Save the first address of the next batch. */ - sx.first_addr = sx.next_addr; + sx->first_addr = sx->next_addr; /* Responses from CHUNKING commands go in buffer. Otherwise, there has not been a response. */ - sx.buffer[0] = 0; + sx->buffer[0] = 0; sigalrm_seen = FALSE; transport_write_timeout = ob->data_timeout; smtp_command = US"sending data block"; /* For error messages */ DEBUG(D_transport|D_v) - if (sx.peer_offered & OPTION_CHUNKING) + if (sx->peer_offered & OPTION_CHUNKING) debug_printf(" will write message using CHUNKING\n"); else debug_printf(" SMTP>> writing message and terminating \".\"\n"); transport_count = 0; #ifndef DISABLE_DKIM + { +# ifdef MEASURE_TIMING + struct timeval t0; + gettimeofday(&t0, NULL); +# endif dkim_exim_sign_init(); # ifdef EXPERIMENTAL_ARC { @@ -3698,7 +3701,7 @@ else if (!f.expand_string_forcedfail) { message = US"failed to expand arc_sign"; - sx.ok = FALSE; + sx->ok = FALSE; goto SEND_FAILED; } } @@ -3711,9 +3714,13 @@ else } } # endif - sx.ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message); +# ifdef MEASURE_TIMING + report_time_since(&t0, US"dkim_exim_sign_init (delta)"); +# endif + } + sx->ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message); #else - sx.ok = transport_write_message(&tctx, 0); + sx->ok = transport_write_message(&tctx, 0); #endif /* transport_write_message() uses write() because it is called from other @@ -3727,7 +3734,7 @@ else or the failure of a transport filter or the expansion of added headers. Or, when CHUNKING, it can be a protocol-detected failure. */ - if (!sx.ok) + if (!sx->ok) if (message) goto SEND_FAILED; else goto RESPONSE_FAILED; @@ -3739,22 +3746,22 @@ else smtp_command = US"end of data"; - if (sx.peer_offered & OPTION_CHUNKING && sx.cmd_count > 1) + if (sx->peer_offered & OPTION_CHUNKING && sx->cmd_count > 1) { /* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */ - switch(sync_responses(&sx, sx.cmd_count-1, 0)) + switch(sync_responses(sx, sx->cmd_count-1, 0)) { - case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */ - case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */ + case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */ + case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */ break; - case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ - if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */ + case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ + if (!sx->lmtp) sx->completed_addr = TRUE; /* can't tell about progress yet */ case 0: break; /* No 2xx or 5xx, but no probs */ case -1: goto END_OFF; /* Timeout on RCPT */ -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT case -5: /* TLS first-read error */ case -4: HDEBUG(D_transport) debug_printf("failed reaping pipelined cmd responses\n"); @@ -3768,17 +3775,17 @@ else individual responses, before going on with the overall response. If we don't get the warning then deal with per non-PRDR. */ - if(sx.prdr_active) + if(sx->prdr_active) { - sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '3', ob->final_timeout); - if (!sx.ok && errno == 0) switch(sx.buffer[0]) + sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '3', ob->final_timeout); + if (!sx->ok && errno == 0) switch(sx->buffer[0]) { - case '2': sx.prdr_active = FALSE; - sx.ok = TRUE; + case '2': sx->prdr_active = FALSE; + sx->ok = TRUE; break; case '4': errno = ERRNO_DATA4XX; addrlist->more_errno |= - ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; break; } } @@ -3788,14 +3795,14 @@ else /* For non-PRDR SMTP, we now read a single response that applies to the whole message. If it is OK, then all the addresses have been delivered. */ - if (!sx.lmtp) + if (!sx->lmtp) { - sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2', + sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', ob->final_timeout); - if (!sx.ok && errno == 0 && sx.buffer[0] == '4') + if (!sx->ok && errno == 0 && sx->buffer[0] == '4') { errno = ERRNO_DATA4XX; - addrlist->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; } } @@ -3811,7 +3818,7 @@ else software before the spool gets updated. Also record the final SMTP confirmation if needed (for SMTP only). */ - if (sx.ok) + if (sx->ok) { int flag = '='; struct timeval delivery_time; @@ -3819,7 +3826,7 @@ else uschar * conf = NULL; timesince(&delivery_time, &start_delivery_time); - sx.send_rset = FALSE; + sx->send_rset = FALSE; pipelining_active = FALSE; /* Set up confirmation if needed - applies only to SMTP */ @@ -3828,18 +3835,18 @@ else #ifdef DISABLE_EVENT LOGGING(smtp_confirmation) && #endif - !sx.lmtp + !sx->lmtp ) { - const uschar *s = string_printing(sx.buffer); + const uschar *s = string_printing(sx->buffer); /* deconst cast ok here as string_printing was checked to have alloc'n'copied */ - conf = (s == sx.buffer)? US string_copy(s) : US s; + conf = (s == sx->buffer)? US string_copy(s) : US s; } /* Process all transported addresses - for LMTP or PRDR, read a status for each one. */ - for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next) + for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next) { if (addr->transport_return != PENDING_OK) continue; @@ -3849,43 +3856,43 @@ else it doesn't get tried again too soon. */ #ifndef DISABLE_PRDR - if (sx.lmtp || sx.prdr_active) + if (sx->lmtp || sx->prdr_active) #else - if (sx.lmtp) + if (sx->lmtp) #endif { - if (!smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2', + if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', ob->final_timeout)) { - if (errno != 0 || sx.buffer[0] == 0) goto RESPONSE_FAILED; + if (errno != 0 || sx->buffer[0] == 0) goto RESPONSE_FAILED; addr->message = string_sprintf( #ifndef DISABLE_PRDR - "%s error after %s: %s", sx.prdr_active ? "PRDR":"LMTP", + "%s error after %s: %s", sx->prdr_active ? "PRDR":"LMTP", #else "LMTP error after %s: %s", #endif - data_command, string_printing(sx.buffer)); + data_command, string_printing(sx->buffer)); setflag(addr, af_pass_message); /* Allow message to go to user */ - if (sx.buffer[0] == '5') + if (sx->buffer[0] == '5') addr->transport_return = FAIL; else { errno = ERRNO_DATA4XX; - addr->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; addr->transport_return = DEFER; #ifndef DISABLE_PRDR - if (!sx.prdr_active) + if (!sx->prdr_active) #endif retry_add_item(addr, addr->address_retry_key, 0); } continue; } - sx.completed_addr = TRUE; /* NOW we can set this flag */ + sx->completed_addr = TRUE; /* NOW we can set this flag */ if (LOGGING(smtp_confirmation)) { - const uschar *s = string_printing(sx.buffer); + const uschar *s = string_printing(sx->buffer); /* deconst cast ok here as string_printing was checked to have alloc'n'copied */ - conf = (s == sx.buffer) ? US string_copy(s) : US s; + conf = (s == sx->buffer) ? US string_copy(s) : US s; } } @@ -3905,18 +3912,18 @@ else if (tcp_out_fastopen >= TFO_USED_NODATA) setflag(addr, af_tcp_fastopen); if (tcp_out_fastopen >= TFO_USED_DATA) setflag(addr, af_tcp_fastopen_data); } - if (sx.pipelining_used) setflag(addr, af_pipelining); -#ifdef EXPERIMENTAL_PIPE_CONNECT - if (sx.early_pipe_active) setflag(addr, af_early_pipe); + if (sx->pipelining_used) setflag(addr, af_pipelining); +#ifndef DISABLE_PIPE_CONNECT + if (sx->early_pipe_active) setflag(addr, af_early_pipe); #endif #ifndef DISABLE_PRDR - if (sx.prdr_active) setflag(addr, af_prdr_used); + if (sx->prdr_active) setflag(addr, af_prdr_used); #endif - if (sx.peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used); + if (sx->peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used); flag = '-'; #ifndef DISABLE_PRDR - if (!sx.prdr_active) + if (!sx->prdr_active) #endif { /* Update the journal. For homonymic addresses, use the base address plus @@ -3925,37 +3932,37 @@ else write error, as it may prove possible to update the spool file later. */ if (testflag(addr, af_homonym)) - sprintf(CS sx.buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); + sprintf(CS sx->buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); else - sprintf(CS sx.buffer, "%.500s\n", addr->unique); + sprintf(CS sx->buffer, "%.500s\n", addr->unique); - DEBUG(D_deliver) debug_printf("S:journalling %s\n", sx.buffer); - len = Ustrlen(CS sx.buffer); - if (write(journal_fd, sx.buffer, len) != len) + DEBUG(D_deliver) debug_printf("S:journalling %s\n", sx->buffer); + len = Ustrlen(CS sx->buffer); + if (write(journal_fd, sx->buffer, len) != len) log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for " - "%s: %s", sx.buffer, strerror(errno)); + "%s: %s", sx->buffer, strerror(errno)); } } #ifndef DISABLE_PRDR - if (sx.prdr_active) + if (sx->prdr_active) { const uschar * overall_message; /* PRDR - get the final, overall response. For any non-success upgrade all the address statuses. */ - sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2', + sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', ob->final_timeout); - if (!sx.ok) + if (!sx->ok) { - if(errno == 0 && sx.buffer[0] == '4') + if(errno == 0 && sx->buffer[0] == '4') { errno = ERRNO_DATA4XX; - addrlist->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; } - for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next) - if (sx.buffer[0] == '5' || addr->transport_return == OK) + for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next) + if (sx->buffer[0] == '5' || addr->transport_return == OK) addr->transport_return = PENDING_OK; /* allow set_errno action */ goto RESPONSE_FAILED; } @@ -3963,24 +3970,24 @@ else /* Append the overall response to the individual PRDR response for logging and update the journal, or setup retry. */ - overall_message = string_printing(sx.buffer); - for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next) + overall_message = string_printing(sx->buffer); + for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next) if (addr->transport_return == OK) addr->message = string_sprintf("%s\\n%s", addr->message, overall_message); - for (address_item * addr = addrlist; addr != sx.first_addr; addr = addr->next) + for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next) if (addr->transport_return == OK) { if (testflag(addr, af_homonym)) - sprintf(CS sx.buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); + sprintf(CS sx->buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); else - sprintf(CS sx.buffer, "%.500s\n", addr->unique); + sprintf(CS sx->buffer, "%.500s\n", addr->unique); - DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", sx.buffer); - len = Ustrlen(CS sx.buffer); - if (write(journal_fd, sx.buffer, len) != len) + DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", sx->buffer); + len = Ustrlen(CS sx->buffer); + if (write(journal_fd, sx->buffer, len) != len) log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for " - "%s: %s", sx.buffer, strerror(errno)); + "%s: %s", sx->buffer, strerror(errno)); } else if (addr->transport_return == DEFER) retry_add_item(addr, addr->address_retry_key, -2); @@ -4004,7 +4011,7 @@ assumed if errno == 0 and there is no text in the buffer. If control reaches here during the setting up phase (i.e. before MAIL FROM) then always defer, as the problem is not related to this specific message. */ -if (!sx.ok) +if (!sx->ok) { int code, set_rc; uschar * set_message; @@ -4013,8 +4020,8 @@ if (!sx.ok) { save_errno = errno; message = NULL; - sx.send_quit = check_response(host, &save_errno, addrlist->more_errno, - sx.buffer, &code, &message, &pass_message); + sx->send_quit = check_response(host, &save_errno, addrlist->more_errno, + sx->buffer, &code, &message, &pass_message); goto FAILED; } @@ -4024,7 +4031,7 @@ if (!sx.ok) code = '4'; message = string_sprintf("send() to %s [%s] failed: %s", host->name, host->address, message ? message : US strerror(save_errno)); - sx.send_quit = FALSE; + sx->send_quit = FALSE; goto FAILED; } @@ -4032,7 +4039,7 @@ if (!sx.ok) { BOOL message_error; - sx.ok = FALSE; /* For when reached by GOTO */ + sx->ok = FALSE; /* For when reached by GOTO */ set_message = message; /* We want to handle timeouts after MAIL or "." and loss of connection after @@ -4094,7 +4101,7 @@ if (!sx.ok) if (save_errno > 0) message = US string_sprintf("%s: %s", message, strerror(save_errno)); - write_logs(host, message, sx.first_addr ? sx.first_addr->basic_errno : 0); + write_logs(host, message, sx->first_addr ? sx->first_addr->basic_errno : 0); *message_defer = TRUE; } @@ -4108,7 +4115,7 @@ if (!sx.ok) else { -#ifdef EXPERIMENTAL_PIPE_CONNECT +#ifndef DISABLE_PIPE_CONNECT /* If we were early-pipelinng and the actual EHLO response did not match the cached value we assumed, we could have detected it and passed a custom errno through to here. It would be nice to RSET and retry right @@ -4127,7 +4134,7 @@ if (!sx.ok) set_errno(addrlist, save_errno, set_message, set_rc, pass_message, host #ifdef EXPERIMENTAL_DSN_INFO - , sx.smtp_greeting, sx.helo_response + , sx->smtp_greeting, sx->helo_response #endif ); } @@ -4163,10 +4170,10 @@ hosts_nopass_tls. */ DEBUG(D_transport) debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d " - "yield=%d first_address is %sNULL\n", sx.ok, sx.send_quit, - sx.send_rset, f.continue_more, yield, sx.first_addr ? "not " : ""); + "yield=%d first_address is %sNULL\n", sx->ok, sx->send_quit, + sx->send_rset, f.continue_more, yield, sx->first_addr ? "not " : ""); -if (sx.completed_addr && sx.ok && sx.send_quit) +if (sx->completed_addr && sx->ok && sx->send_quit) { BOOL more; smtp_compare_t t_compare; @@ -4174,7 +4181,7 @@ if (sx.completed_addr && sx.ok && sx.send_quit) t_compare.tblock = tblock; t_compare.current_sender_address = sender_address; - if ( sx.first_addr != NULL + if ( sx->first_addr != NULL || f.continue_more || ( #ifndef DISABLE_TLS @@ -4191,20 +4198,20 @@ if (sx.completed_addr && sx.ok && sx.send_quit) uschar *msg; BOOL pass_message; - if (sx.send_rset) - if (! (sx.ok = smtp_write_command(&sx, SCMD_FLUSH, "RSET\r\n") >= 0)) + if (sx->send_rset) + if (! (sx->ok = smtp_write_command(sx, SCMD_FLUSH, "RSET\r\n") >= 0)) { msg = US string_sprintf("send() to %s [%s] failed: %s", host->name, host->address, strerror(errno)); - sx.send_quit = FALSE; + sx->send_quit = FALSE; } - else if (! (sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), + else if (! (sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', ob->command_timeout))) { int code; - sx.send_quit = check_response(host, &errno, 0, sx.buffer, &code, &msg, + sx->send_quit = check_response(host, &errno, 0, sx->buffer, &code, &msg, &pass_message); - if (!sx.send_quit) + if (!sx->send_quit) { DEBUG(D_transport) debug_printf("H=%s [%s] %s\n", host->name, host->address, msg); @@ -4213,15 +4220,15 @@ if (sx.completed_addr && sx.ok && sx.send_quit) /* Either RSET was not needed, or it succeeded */ - if (sx.ok) + if (sx->ok) { #ifndef DISABLE_TLS int pfd[2]; #endif - int socket_fd = sx.cctx.sock; + int socket_fd = sx->cctx.sock; - if (sx.first_addr != NULL) /* More addresses still to be sent */ + if (sx->first_addr != NULL) /* More addresses still to be sent */ { /* in this run of the transport */ continue_sequence++; /* Causes * in logging */ goto SEND_MESSAGE; @@ -4243,16 +4250,16 @@ if (sx.completed_addr && sx.ok && sx.send_quit) a new EHLO. If we don't get a good response, we don't attempt to pass the socket on. */ - tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_WAIT); - sx.cctx.tls_ctx = NULL; + tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_WAIT); + sx->cctx.tls_ctx = NULL; smtp_peer_options = smtp_peer_options_wrap; - sx.ok = !sx.smtps - && smtp_write_command(&sx, SCMD_FLUSH, "EHLO %s\r\n", sx.helo_data) + sx->ok = !sx->smtps + && smtp_write_command(sx, SCMD_FLUSH, "EHLO %s\r\n", sx->helo_data) >= 0 - && smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), + && smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', ob->command_timeout); - if (sx.ok && f.continue_more) + if (sx->ok && f.continue_more) return yield; /* More addresses for another run */ } else @@ -4260,13 +4267,13 @@ if (sx.completed_addr && sx.ok && sx.send_quit) /* Set up a pipe for proxying TLS for the new transport process */ smtp_peer_options |= OPTION_TLS; - if (sx.ok = (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0)) + if ((sx->ok = socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0)) socket_fd = pfd[1]; else - set_errno(sx.first_addr, errno, US"internal allocation problem", + set_errno(sx->first_addr, errno, US"internal allocation problem", DEFER, FALSE, host # ifdef EXPERIMENTAL_DSN_INFO - , sx.smtp_greeting, sx.helo_response + , sx->smtp_greeting, sx->helo_response # endif ); } @@ -4281,10 +4288,10 @@ if (sx.completed_addr && sx.ok && sx.send_quit) /*XXX DSN_INFO: assume likely to do new HELO; but for greet we'll want to propagate it from the initial */ - if (sx.ok && transport_pass_socket(tblock->name, host->name, + if (sx->ok && transport_pass_socket(tblock->name, host->name, host->address, new_message_id, socket_fd)) { - sx.send_quit = FALSE; + sx->send_quit = FALSE; /* We have passed the client socket to a fresh transport process. If TLS is still active, we need to proxy it for the transport we @@ -4297,9 +4304,9 @@ propagate it from the initial int pid = fork(); if (pid == 0) /* child; fork again to disconnect totally */ { - if (f.running_in_test_harness) millisleep(100); /* let parent debug out */ + testharness_pause_ms(100); /* let parent debug out */ /* does not return */ - smtp_proxy_tls(sx.cctx.tls_ctx, sx.buffer, sizeof(sx.buffer), pfd, + smtp_proxy_tls(sx->cctx.tls_ctx, sx->buffer, sizeof(sx->buffer), pfd, ob->command_timeout); } @@ -4309,10 +4316,10 @@ propagate it from the initial close(pfd[0]); /* tidy the inter-proc to disconn the proxy proc */ waitpid(pid, NULL, 0); - tls_close(sx.cctx.tls_ctx, TLS_NO_SHUTDOWN); - sx.cctx.tls_ctx = NULL; - (void)close(sx.cctx.sock); - sx.cctx.sock = -1; + tls_close(sx->cctx.tls_ctx, TLS_NO_SHUTDOWN); + sx->cctx.tls_ctx = NULL; + (void)close(sx->cctx.sock); + sx->cctx.sock = -1; continue_transport = NULL; continue_hostname = NULL; return yield; @@ -4325,9 +4332,9 @@ propagate it from the initial /* If RSET failed and there are addresses left, they get deferred. */ else - set_errno(sx.first_addr, errno, msg, DEFER, FALSE, host + set_errno(sx->first_addr, errno, msg, DEFER, FALSE, host #ifdef EXPERIMENTAL_DSN_INFO - , sx.smtp_greeting, sx.helo_response + , sx->smtp_greeting, sx->helo_response #endif ); } @@ -4353,15 +4360,15 @@ operation, the old commented-out code was removed on 17-Sep-99. */ SEND_QUIT: #ifdef TCP_CORK -(void) setsockopt(sx.cctx.sock, IPPROTO_TCP, TCP_CORK, US &on, sizeof(on)); +(void) setsockopt(sx->cctx.sock, IPPROTO_TCP, TCP_CORK, US &on, sizeof(on)); #endif -if (sx.send_quit) (void)smtp_write_command(&sx, SCMD_FLUSH, "QUIT\r\n"); +if (sx->send_quit) (void)smtp_write_command(sx, SCMD_FLUSH, "QUIT\r\n"); END_OFF: #ifndef DISABLE_TLS -tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT); -sx.cctx.tls_ctx = NULL; +tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT); +sx->cctx.tls_ctx = NULL; #endif /* Close the socket, and return the appropriate value, first setting @@ -4375,15 +4382,16 @@ specified in the transports, and therefore not visible at top level, in which case continue_more won't get set. */ HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n"); -if (sx.send_quit) +if (sx->send_quit) { - shutdown(sx.cctx.sock, SHUT_WR); - millisleep(f.running_in_test_harness ? 200 : 20); - if (fcntl(sx.cctx.sock, F_SETFL, O_NONBLOCK) == 0) - for (int i = 16; read(sx.cctx.sock, sx.inbuffer, sizeof(sx.inbuffer)) > 0 && i > 0;) + shutdown(sx->cctx.sock, SHUT_WR); + millisleep(20); + testharness_pause_ms(200); + if (fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0) + for (int i = 16; read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && i > 0;) i--; /* drain socket */ } -(void)close(sx.cctx.sock); +(void)close(sx->cctx.sock); #ifndef DISABLE_EVENT (void) event_raise(tblock->event_action, US"tcp:close", NULL); @@ -4484,6 +4492,7 @@ for (address_item * addr = addrlist; addr; addr = addr->next) addr->peercert = NULL; addr->peerdn = NULL; addr->ocsp = OCSP_NOT_REQ; + addr->tlsver = NULL; #endif #ifdef EXPERIMENTAL_DSN_INFO addr->smtp_greeting = NULL; @@ -4596,6 +4605,17 @@ if (!hostlist || (ob->hosts_override && ob->hosts)) else if (ob->hosts_randomize) s = expanded_hosts = string_copy(s); + if (is_tainted(s)) + { + log_write(0, LOG_MAIN|LOG_PANIC, + "attempt to use tainted host list '%s' from '%s' in transport %s", + s, ob->hosts, tblock->name); + /* Avoid leaking info to an attacker */ + addrlist->message = US"internal configuration error"; + addrlist->transport_return = PANIC; + return FALSE; + } + host_build_hostlist(&hostlist, s, ob->hosts_randomize); /* Check that the expansion yielded something useful. */ @@ -4835,7 +4855,7 @@ retry_non_continued: { for (address_item * addr = addrlist; addr; addr = addr->next) { - addr->basic_errno = 0; + addr->basic_errno = ERRNO_HOST_IS_LOCAL; addr->message = string_sprintf("%s transport found host %s to be " "local", tblock->name, host->name); } @@ -5080,7 +5100,7 @@ retry_non_continued: if (expanded_hosts) { - thost = store_get(sizeof(host_item)); + thost = store_get(sizeof(host_item), FALSE); *thost = *host; thost->name = string_copy(host->name); thost->address = string_copy(host->address); @@ -5321,7 +5341,7 @@ retry_non_continued: ob->hosts_max_try_hardlimit); } - if (f.running_in_test_harness) millisleep(500); /* let server debug out */ + testharness_pause_ms(500); /* let server debug out */ } /* End of loop for trying multiple hosts. */ /* If we failed to find a matching host in the list, for an already-open