1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.103 2005/03/29 14:19:21 ph10 Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
10 TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
11 doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
13 TK/02 Fix ACL "control" statement not being available in MIME ACL.
15 TK/03 Fix ACL "regex" condition not being available in MIME ACL.
17 PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
18 to test Sieve filters that use "vacation".
20 PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
21 that changes the way the GnuTLS parameters are stored in the cache file.
22 The new format can be generated externally. For backward compatibility,
23 if the data in the cache doesn't make sense, Exim assumes it has read an
24 old-format file, and it generates new data and writes a new file. This
25 means that you can't go back to an older release without removing the
28 PH/03 A redirect router that has both "unseen" and "one_time" set does not
29 work if there are any delivery delays because "one_time" forces the
30 parent to be marked "delivered", so its unseen clone is never tried
31 again. For this reason, Exim now forbids the simultaneous setting of
34 PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
35 redirected to themselves ("homonym" addresses). Read the long ChangeLog
36 entry if you want to know the details. The fix, however, neglected to
37 consider the case when local delivery batching is involved. The test for
38 "previously delivered" was not happening when checking to see if an
39 address could be batched with a previous (undelivered) one; under
40 certain circumstances this could lead to multiple deliveries to the same
41 address. A one-line patch to add the appropriate test fixes the bug.
43 PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
44 in its include files, and this causes problems building Exim.
46 PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
47 header_syntax) but Exim was just ignoring anything given after a slash.
48 In particular, this caused confusion with an attempt to use "verify =
49 reverse_host_lookup/defer_ok". An error is now given when options are
50 supplied for verify items that do not have them. (Maybe reverse_host_
51 lookup should have a defer_ok option, but that's a different point.)
53 PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
54 defined by RFC 821) to 2048, because there were problems with some AUTH
55 commands, and RFC 1869 says the size should be increased for extended
56 SMTP commands that take arguments.
58 PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
61 PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
62 "unknown" error; now it says that the functionality isn't in the binary.
64 PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
65 an address' error message when a string expansion fails (syntax or
66 whatever). Otherwise not only does the password appear in the log, it may
67 also be put in a bounce message.
69 PH/11 Installed exipick version 20050225.0 from John Jetmore.
71 PH/12 If the last host in a fallback_hosts list was multihomed, only the first
72 of its addresses was ever tried. (Bugzilla bug #2.)
74 PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
75 the result incorrectly in the debug output. (It correctly added a newline
76 to what was transported.)
78 TF/01 Added $received_time.
80 PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
81 commented out examples of how to interface to a virus scanner and to
82 SpamAssassin. Also added commented examples of av_scanner and
83 spamd_address settings.
85 PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
86 and controls are allowed in which ACLs. There were a couple of minor
87 errors. Some of the entries in the conditions table (which is a table of
88 where they are NOT allowed) were getting very unwieldy; rewrote them as a
89 negation of where the condition IS allowed.
91 PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
93 PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
94 header file does not have a version number, so I've had to invent a new
95 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
96 API. The code is untested by me (my Linux distribution still has 0.3.2 of
97 radiusclient), but it was contributed by a Radius user.
100 A note about Exim versions 4.44 and 4.50
101 ----------------------------------------
103 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
104 changes of various kinds. As a consequence, a big documentation update was
105 needed. This delayed the release for rather longer than seemed good, especially
106 in the light of a couple of (minor) security issues. Therefore, the changes
107 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
108 release. So 4.44 and 4.50 are in effect two different branches that both start
111 I have left the 4.50 change log unchanged; it contains all the changes since
112 4.43. The change log for 4.44 is below; many of its items are identical to
113 those for 4.50. This seems to be the most sensible way to preserve the
114 historical information.
120 1. Minor wording change to the doc/README.SIEVE file.
122 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
123 computation of the current number of files was incorrect.
125 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
126 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
129 4. Give more explanation in the error message when the command for a transport
130 filter fails to execute.
132 5. There are several places where Exim runs a non-Exim command in a
133 subprocess. The SIGUSR1 signal should be disabled for these processes. This
134 was being done only for the command run by the queryprogram router. It is
135 now done for all such subprocesses. The other cases are: ${run, transport
136 filters, and the commands run by the lmtp and pipe transports.
138 6. Added CONFIGURE_GROUP build-time option.
140 7. Some older OS have a limit of 256 on the maximum number of file
141 descriptors. Exim was using setrlimit() to set 1000 as a large value
142 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
143 systems. I've change it so that if it can't get 1000, it tries for 256.
145 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
146 was an oversight, and furthermore, ever since the addition of extra
147 controls (e.g. 4.43/32), the checks on when to allow different forms of
148 "control" were broken. There should now be diagnostics for all cases when a
149 control that does not make sense is encountered.
151 9. Added the /retain_sender option to "control=submission".
153 10. $recipients is now available in the predata ACL (oversight).
155 11. Tidy the search cache before the fork to do a delivery from a message
156 received from the command line. Otherwise the child will trigger a lookup
157 failure and thereby defer the delivery if it tries to use (for example) a
158 cached ldap connection that the parent has called unbind on.
160 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
161 of $address_data from the recipient verification was clobbered by the
164 13. The value of address_data from a sender verification is now available in
165 $sender_address_data in subsequent conditions in the ACL statement.
167 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
169 15. Added a new option "connect=<time>" to callout options, to set a different
172 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
173 was its contents. (It was OK if the option was not defined at all.)
175 17. A "Completed" log line is now written for messages that are removed from
176 the spool by the -Mrm option.
178 18. New variables $sender_verify_failure and $recipient_verify_failure contain
179 information about exactly what failed.
181 19. Added -dd to debug only the daemon process.
183 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
184 handles timeouts, both on the server side and network timeouts. Renamed the
185 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
187 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
188 It is now set to "smtps".
190 22. $host_address is now set to the target address during the checking of
193 23. When checking ignore_target_hosts for an ipliteral router, no host name was
194 being passed; this would have caused $sender_host_name to have been used if
195 matching the list had actually called for a host name (not very likely,
196 since this list is usually IP addresses). A host name is now passed as
199 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
200 code that specifies a non-restarting handler (typically sigaction() in
201 modern systems) in an attempt to fix a rare and obscure crash bug.
203 25. Narrowed the window for a race in the daemon that could cause it to ignore
204 SIGCHLD signals. This is not a major problem, because they are used only to
205 wake it up if nothing else does.
207 26. A malformed maildirsize file could cause Exim to calculate negative values
208 for the mailbox size or file count. Odd effects could occur as a result.
209 The maildirsize information is now recalculated if the size or filecount
212 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
213 support for a long time. Removed HAVE_SYS_VFS_H.
215 28. Installed the latest version of exipick from John Jetmore.
217 29. In an address list, if the pattern was not a regular expression, an empty
218 subject address (from a bounce message) matched only if the pattern was an
219 empty string. Non-empty patterns were not even tested. This was the wrong
220 because it is perfectly reasonable to use an empty address as part of a
221 database query. An empty address is now tested by patterns that are
222 lookups. However, all the other forms of pattern expect the subject to
223 contain a local part and a domain, and therefore, for them, an empty
224 address still always fails if the pattern is not itself empty.
226 30. Exim went into a mad DNS loop when attempting to do a callout where the
227 host was specified on an smtp transport, and looking it up yielded more
230 31. Re-factored the code for checking spool and log partition space into a
231 function that finds that data and another that does the check. The former
232 is then used to implement four new variables: $spool_space, $log_space,
233 $spool_inodes, and $log_inodes.
235 32. The RFC2047 encoding function was originally intended for short strings
236 such as real names; it was not keeping to the 75-character limit for
237 encoded words that the RFC imposes. It now respects the limit, and
238 generates multiple encoded words if necessary. To be on the safe side, I
239 have increased the buffer size for the ${rfc2047: expansion operator from
242 33. It is now permitted to omit both strings after an "if" condition; if the
243 condition is true, the result is "true". As before, when the second string
244 is omitted, a false condition yields an empty string. This makes it less
245 cumbersome to write custom ACL and router conditions.
247 34. Failure to deliver a bounce message always caused it to be frozen, even if
248 there was an errors_to setting on the router. The errors_to setting is now
251 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
252 canonical form (fully expanded) before being placed in
253 $sender_host_address.
255 36. The table in the code that translates DNS record types into text (T_A to
256 "A" for instance) was missing entries for NS and CNAME. It is just possible
257 that this could have caused confusion if both these types were looked up
258 for the same domain, because the text type is used as part of Exim's
259 per-process caching. But the chance of anyone hitting this buglet seems
262 37. The dnsdb lookup has been extended in a number of ways.
264 (1) There is a new type, "zns", which walks up the domain tree until it
265 finds some nameserver records. It should be used with care.
267 (2) There is a new type, "mxh", which is like "mx" except that it returns
268 just the host names, not the priorities.
270 (3) It is now possible to give a list of domains (or IP addresses) to be
271 looked up. The behaviour when one of the lookups defers can be
272 controlled by a keyword.
274 (4) It is now possible to specify the separator character for use when
275 multiple records are returned.
277 38. The dnslists ACL condition has been extended: it is now possible to supply
278 a list of IP addresses and/or domains to be looked up in a particular DNS
281 39. Added log_selector=+queue_time_overall.
283 40. When running the queue in the test harness, wait just a tad after forking a
284 delivery process, to get repeatability of debugging output.
286 41. Include certificate and key file names in error message when GnuTLS fails
287 to set them up, because the GnuTLS error message doesn't include the name
288 of the failing file when there is a problem reading it.
290 42. Allow both -bf and -bF in the same test run.
292 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
294 44. The "Exiscan patch" is now merged into the mainline Exim source.
296 45. Sometimes the final signoff response after QUIT could fail to get
297 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
298 < 0 before doing a fflush(). This bug looks as though it goes back to the
299 introduction of TLS in release 3.20, but "sometimes" must have been rare
300 because the tests only now provoked it.
302 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
303 (this can affect the format of dates).
305 47. exim_tidydb, when checking for the continued existence of a message for
306 which it has found a message-specific retry record, was not finding
307 messages that were in split spool directories. Consequently, it was
308 deleting retry records that should have stayed in existence.
310 48. Steve fixed some bugs in eximstats.
312 49. The SPA authentication driver was not abandoning authentication and moving
313 on to the next authenticator when an expansion was forced to fail,
314 contradicting the general specification for all authenticators. Instead it
315 was generating a temporary error. It now behaves as specified.
317 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
318 (the order specifies the preference for clients). The order is now AES256,
319 AES128, 3DES, ARCFOUR128.
321 51. Small patch to Sieve code - explicitly set From: when generating an
324 52. Exim crashed if a remote delivery caused a very long error message to be
325 recorded - for instance if somebody sent an entire SpamAssassin report back
326 as a large number of 550 error lines. This bug was coincidentally fixed by
327 increasing the size of one of Exim's internal buffers (big_buffer) that
328 happened as part of the Exiscan merge. However, to be on the safe side, I
329 have made the code more robust (and fixed the comments that describe what
332 53. Now that there can be additional text after "Completed" in log lines (if
333 the queue_time_overall log selector is set), a one-byte patch to exigrep
334 was needed to allow it to recognize "Completed" as not the last thing in
337 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
338 patch that reportedly fixes this has been added. I am not expert enough to
339 create a test for it. This is what the patch creator wrote:
341 "I found a little strange behaviour of ldap code when working with
342 Windows 2003 AD Domain, where users was placed in more than one
343 Organization Units. When I tried to give exim partial DN, the exit code
344 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
345 But simultaneously result of request was absolutely normal ldap result,
346 so I produce this patch..."
348 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
349 REFERENCE, so I have modified the code to exclude the patch when that macro
352 55. Some experimental protocols are using DNS PTR records for new purposes. The
353 keys for these records are domain names, not reversed IP addresses. The
354 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
355 leaves it alone. Component reversal etc. now happens only for IP addresses.
358 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
360 57. Double the size of the debug message buffer (to 2048) so that more of very
361 long debug lines gets shown.
363 58. The exicyclog utility now does better if the number of log files to keep
364 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
366 59. Two changes related to the smtp_active_hostname option:
368 (1) $smtp_active_hostname is now available as a variable.
369 (2) The default for smtp_banner uses $smtp_active_hostname instead
370 of $primary_hostname.
372 60. The host_aton() function is supposed to be passed a string that is known
373 to be a valid IP address. However, in the case of IPv6 addresses, it was
374 not checking this. This is a hostage to fortune. Exim now panics and dies
375 if the condition is not met. A case was found where this could be provoked
376 from a dnsdb PTR lookup with an IPv6 address that had more than 8
377 components; fortuitously, this particular loophole had already been fixed
378 by change 4.50/55 above.
380 If there are any other similar loopholes, the new check in host_aton()
381 itself should stop them being exploited. The report I received stated that
382 data on the command line could provoke the exploit when Exim was running as
383 exim, but did not say which command line option was involved. All I could
384 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
388 61. There was a buffer overflow vulnerability in the SPA authentication code
389 (which came originally from the Samba project). I have added a test to the
390 spa_base64_to_bits() function which I hope fixes it.
393 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
394 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
396 63. The daemon start-up calls getloadavg() while still root for those OS that
397 need the first call to be done as root, but it missed one case: when
398 deliver_queue_load_max is set with deliver_drop_privilege. This is
399 necessary for the benefit of the queue runner, because there is no re-exec
400 when deliver_drop_privilege is set.
402 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
405 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
406 was in use, was not putting the data itself into the right store pool;
407 consequently, it could be overwritten for a subsequent message in the same
408 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
411 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
413 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
414 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
415 the function were treating the return as a boolean value, which happened to
416 work because 0=false and not-0=true, but is not correct code.
418 68. The host_aton() function was not handling scoped IPv6 addresses (those
419 with, for example, "%eth0" on the end) correctly.
421 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
422 negated items (that is, ~something) in unsigned ints. Some compilers
423 apparently mutter when there is no cast.
425 70. If an address verification called from an ACL failed, and did not produce a
426 user-specific message (i.e. there was only a "system" message), nothing was
427 put in $acl_verify_message. In this situation, it now puts the system
430 71. Change 4.23/11 added synchronization checking at the start of an SMTP
431 session; change 4.31/43 added the unwanted input to the log line - except
432 that it did not do this in the start of session case. It now does.
434 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
435 This is wrong and can cause the other end to generate a synchronization
436 error if it is another Exim or anything else that does the synchronization
437 check. A QUIT command is no longer sent after a timeout.
439 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
442 74. The defer_ok option of callout verification was not working if it was used
443 when verifying addresses in header lines, that is, for this case:
445 verify = header_sender/callout=defer_ok
447 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
448 those file descriptors could be used for SMTP connections. If anything
449 wrote to stderr (the example that came up was "warn" in embedded Perl), it
450 could be sent to the SMTP client, causing chaos. The daemon now opens
451 stdin, stdout, and stderr to /dev/null when it puts itself into the
454 76. Arrange for output from Perl's "warn" command to be written to Exim's main
455 log by default. The user can override this with suitable Perl magic.
457 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
458 the log message when discard triggers, was not working for the DATA ACL or
459 for the non-SMTP ACL.
461 78. Error message wording change in sieve.c.
463 79. If smtp_accept_max_per_host was set, the number of connections could be
464 restricted to fewer than expected, because the daemon was trying to set up
465 a new connection before checking whether the processes handling previous
466 connections had finished. The check for completed processes is now done
467 earlier. On busy systems, this bug wouldn't be noticed because something
468 else would have woken the daemon, and it would have reaped the completed
471 80. If a message was submitted locally by a user whose login name contained one
472 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
473 It caused a spool format error. I have fixed the spool reading code. A
474 related problem was that the "from" clause in the Received: line became
475 illegal because of the space(s). It is now covered by ${quote_local_part.
477 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
480 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
482 83. Patch from Sieve maintainer to fix unterminated string problem in
485 84. Some minor changes to the Linux configuration files to help with other
486 OS variants using glibc.
488 85. One more patch for Sieve to update vacation handling to latest spec.
491 ----------------------------------------------------
492 See the note above about the 4.44 and 4.50 releases.
493 ----------------------------------------------------
499 1. Change 4.43/35 introduced a bug that caused file counts to be
500 incorrectly computed when quota_filecount was set in an appendfile
503 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
504 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
507 3. Give more explanation in the error message when the command for a transport
508 filter fails to execute.
510 4. There are several places where Exim runs a non-Exim command in a
511 subprocess. The SIGUSR1 signal should be disabled for these processes. This
512 was being done only for the command run by the queryprogram router. It is
513 now done for all such subprocesses. The other cases are: ${run, transport
514 filters, and the commands run by the lmtp and pipe transports.
516 5. Some older OS have a limit of 256 on the maximum number of file
517 descriptors. Exim was using setrlimit() to set 1000 as a large value
518 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
519 systems. I've change it so that if it can't get 1000, it tries for 256.
521 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
522 was an oversight, and furthermore, ever since the addition of extra
523 controls (e.g. 4.43/32), the checks on when to allow different forms of
524 "control" were broken. There should now be diagnostics for all cases when a
525 control that does not make sense is encountered.
527 7. $recipients is now available in the predata ACL (oversight).
529 8. Tidy the search cache before the fork to do a delivery from a message
530 received from the command line. Otherwise the child will trigger a lookup
531 failure and thereby defer the delivery if it tries to use (for example) a
532 cached ldap connection that the parent has called unbind on.
534 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
535 of $address_data from the recipient verification was clobbered by the
538 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
539 was its contents. (It was OK if the option was not defined at all.)
541 11. A "Completed" log line is now written for messages that are removed from
542 the spool by the -Mrm option.
544 12. $host_address is now set to the target address during the checking of
547 13. When checking ignore_target_hosts for an ipliteral router, no host name was
548 being passed; this would have caused $sender_host_name to have been used if
549 matching the list had actually called for a host name (not very likely,
550 since this list is usually IP addresses). A host name is now passed as
553 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
554 code that specifies a non-restarting handler (typically sigaction() in
555 modern systems) in an attempt to fix a rare and obscure crash bug.
557 15. Narrowed the window for a race in the daemon that could cause it to ignore
558 SIGCHLD signals. This is not a major problem, because they are used only to
559 wake it up if nothing else does.
561 16. A malformed maildirsize file could cause Exim to calculate negative values
562 for the mailbox size or file count. Odd effects could occur as a result.
563 The maildirsize information is now recalculated if the size or filecount
566 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
567 support for a long time. Removed HAVE_SYS_VFS_H.
569 18. Updated exipick to current release from John Jetmore.
571 19. Allow an empty sender to be matched against a lookup in an address list.
572 Previously the only cases considered were a regular expression, or an
575 20. Exim went into a mad DNS lookup loop when doing a callout where the
576 host was specified on the transport, if the DNS lookup yielded more than
579 21. The RFC2047 encoding function was originally intended for short strings
580 such as real names; it was not keeping to the 75-character limit for
581 encoded words that the RFC imposes. It now respects the limit, and
582 generates multiple encoded words if necessary. To be on the safe side, I
583 have increased the buffer size for the ${rfc2047: expansion operator from
586 22. Failure to deliver a bounce message always caused it to be frozen, even if
587 there was an errors_to setting on the router. The errors_to setting is now
590 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
591 canonical form (fully expanded) before being placed in
592 $sender_host_address.
594 24. Updated eximstats to version 1.33
596 25. Include certificate and key file names in error message when GnuTLS fails
597 to set them up, because the GnuTLS error message doesn't include the name
598 of the failing file when there is a problem reading it.
600 26. Expand error message when OpenSSL has problems setting up cert/key files.
603 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
604 (this can affect the format of dates).
606 28. exim_tidydb, when checking for the continued existence of a message for
607 which it has found a message-specific retry record, was not finding
608 messages that were in split spool directories. Consequently, it was
609 deleting retry records that should have stayed in existence.
611 29. eximstats updated to version 1.35
612 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
613 1.35 - bugfix such that pie charts by volume are generated correctly
615 30. The SPA authentication driver was not abandoning authentication and moving
616 on to the next authenticator when an expansion was forced to fail,
617 contradicting the general specification for all authenticators. Instead it
618 was generating a temporary error. It now behaves as specified.
620 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
621 (the order specifies the preference for clients). The order is now AES256,
622 AES128, 3DES, ARCFOUR128.
624 31. Small patch to Sieve code - explicitly set From: when generating an
627 32. Exim crashed if a remote delivery caused a very long error message to be
628 recorded - for instance if somebody sent an entire SpamAssassin report back
629 as a large number of 550 error lines. This bug was coincidentally fixed by
630 increasing the size of one of Exim's internal buffers (big_buffer) that
631 happened as part of the Exiscan merge. However, to be on the safe side, I
632 have made the code more robust (and fixed the comments that describe what
635 33. Some experimental protocols are using DNS PTR records for new purposes. The
636 keys for these records are domain names, not reversed IP addresses. The
637 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
638 leaves it alone. Component reversal etc. now happens only for IP addresses.
641 34. The host_aton() function is supposed to be passed a string that is known
642 to be a valid IP address. However, in the case of IPv6 addresses, it was
643 not checking this. This is a hostage to fortune. Exim now panics and dies
644 if the condition is not met. A case was found where this could be provoked
645 from a dnsdb PTR lookup with an IPv6 address that had more than 8
646 components; fortuitously, this particular loophole had already been fixed
647 by change 4.50/55 or 4.44/33 above.
649 If there are any other similar loopholes, the new check in host_aton()
650 itself should stop them being exploited. The report I received stated that
651 data on the command line could provoke the exploit when Exim was running as
652 exim, but did not say which command line option was involved. All I could
653 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
657 35. There was a buffer overflow vulnerability in the SPA authentication code
658 (which came originally from the Samba project). I have added a test to the
659 spa_base64_to_bits() function which I hope fixes it.
662 36. The daemon start-up calls getloadavg() while still root for those OS that
663 need the first call to be done as root, but it missed one case: when
664 deliver_queue_load_max is set with deliver_drop_privilege. This is
665 necessary for the benefit of the queue runner, because there is no re-exec
666 when deliver_drop_privilege is set.
668 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
669 was in use, was not putting the data itself into the right store pool;
670 consequently, it could be overwritten for a subsequent message in the same
671 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
674 38. Sometimes the final signoff response after QUIT could fail to get
675 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
676 < 0 before doing a fflush(). This bug looks as though it goes back to the
677 introduction of TLS in release 3.20, but "sometimes" must have been rare
678 because the tests only now provoked it.
684 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
685 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
686 Now it returns an integer. A number of calls were still expecting a T/F
687 return. Fortuitously, in all cases, the tests worked in OK situations,
688 which is the norm. However, things would have gone wrong on any write
689 failures on the smtp file descriptor. This function is used when sending
690 messages over SMTP and also when doing verify callouts.
692 2. When Exim is called to do synchronous delivery of a locally submitted
693 message (the -odf or -odi options), it no longer closes stderr before doing
696 3. Implemented the mua_wrapper option.
698 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
700 5. Implemented the functions header_remove(), header_testname(),
701 header_add_at_position(), and receive_remove_recipient(), and exported them
704 6. If an ACL "warn" statement specified the addition of headers, Exim already
705 inserted X-ACL-Warn: at the start if there was no header name. However, it
706 was not making this test for the second and subsequent header lines if
707 there were newlines in the string. This meant that an invalid header could
708 be inserted if Exim was badly configured.
710 7. Allow an ACL "warn" statement to add header lines at the start or after all
711 the Received: headers, as well as at the end.
713 8. Added the rcpt_4xx retry error code.
715 9. Added postmaster_mailfrom=xxx to callout verification option.
717 10. Added mailfrom=xxxx to the callout verification option, for verify=
720 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
721 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
723 12. Inserted some casts to stop certain compilers warning when using pointer
724 differences as field lengths or precisions in printf-type calls (mostly
725 affecting debugging statements).
727 13. Added optional readline() support for -be (dynamically loaded).
729 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
730 same clock tick as a message's arrival, so that its received time was the
731 same as the "first fail" time on the retry record, and that message
732 remained on the queue past the ultimate address timeout, every queue runner
733 would try a delivery (because it was past the ultimate address timeout) but
734 after another failure, the ultimate address timeout, which should have then
735 bounced the address, did not kick in. This was a "< instead of <=" error;
736 in most cases the first failure would have been in the next clock tick
737 after the received time, and all would be well.
739 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
740 being recognized when the domain list was tested by the match_domain
741 condition in an expansion string.
743 16. Added the ${str2b64: operator.
745 17. Exim was always calling setrlimit() to set a large limit for the number of
746 processes, without checking whether the existing limit was already
747 adequate. (It did check for the limit on file descriptors.) Furthermore,
748 errors from getrlimit() and setrlimit() were being ignored. Now they are
749 logged to the main and panic logs, but Exim does carry on, to try to do its
750 job under whatever limits there are.
752 18. Imported PCRE 5.0.
754 19. Trivial typo in log message " temporarily refused connection" (the leading
757 20. If the log selector return_path_on_delivery was set and an address was
758 redirected to /dev/null, the delivery process crashed because it assumed
759 that a return path would always be set for a "successful" delivery. In this
760 case, the whole delivery is bypassed as an optimization, and therefore no
763 21. Internal re-arrangement: the function for sending a challenge and reading
764 a response while authentication was assuming a zero-terminated challenge
765 string. It's now changed to take a pointer and a length, to allow for
766 binary data in such strings.
768 22. Added the cyrus_sasl authenticator (code supplied by MBM).
770 23. Exim was not respecting finduser_retries when seeking the login of the
771 uid under which it was called; it was always trying 10 times. (The default
772 setting of finduser_retries is zero.) Also, it was sleeping after the final
773 failure, which is pointless.
775 24. Implemented tls_on_connect_ports.
777 25. Implemented acl_smtp_predata.
779 26. If the domain in control=submission is set empty, Exim assumes that the
780 authenticated id is a complete email address when it generates From: or
781 Sender: header lines.
783 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
784 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
785 chown and chgrp in /bin and hostname in /usr/bin.
787 28. Exim was keeping the "process log" file open after each use, just as it
788 does for the main log. This opens the possibility of it remaining open for
789 long periods when the USR1 signal hits a daemon. Occasional processlog
790 errors were reported, that could have been caused by this. Anyway, it seems
791 much more sensible not to leave this file open at all, so that is what now
794 29. The long-running daemon process does not normally write to the log once it
795 has entered its main loop, and it closes the log before doing so. This is
796 so that log files can straightforwardly be renamed and moved. However,
797 there are a couple of unusual error situations where the daemon does write
798 log entries, and I had neglected to close the log afterwards.
800 30. The text of an SMTP error response that was received during a remote
801 delivery was being truncated at 512 bytes. This is too short for some of
802 the long messages that one sometimes sees. I've increased the limit to
805 31. It is now possible to make retry rules that apply only when a message has a
806 specific sender, in particular, an empty sender.
808 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
809 it possible to be selective about when SMTP synchronization is enforced.
811 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
813 32. Implemented hosts_connection_nolog.
815 33. Added an ACL for QUIT.
817 34. Setting "delay_warning=" to disable warnings was not working; it gave a
820 35. Added mailbox_size and mailbox_filecount to appendfile.
822 36. Added control = no_multiline_responses to ACLs.
824 37. There was a bug in the logic of the code that waits for the clock to tick
825 in the case where the clock went backwards by a substantial amount such
826 that the microsecond fraction of "now" was more than the microsecond
827 fraction of "then" (but the whole seconds number was less).
829 38. Added support for the libradius Radius client library this is found on
830 FreeBSD (previously only the radiusclient library was supported).
836 1. When certain lookups returned multiple values in the form name=value, the
837 quoting of the values was not always being done properly. Specifically:
838 (a) If the value started with a double quote, but contained no whitespace,
840 (b) If the value contained whitespace other than a space character (i.e.
841 tabs or newlines or carriage returns) it was not quoted.
842 This fix has been applied to the mysql and pgsql lookups by writing a
843 separate quoting function and calling it from the lookup code. The fix
844 should probably also be applied to nisplus, ibase and oracle lookups, but
845 since I cannot test any of those, I have not disturbed their existing code.
847 2. A hit in the callout cache for a specific address caused a log line with no
848 reason for rejecting RCPT. Now it says "Previous (cached) callout
849 verification failure".
851 3. There was an off-by-one bug in the queryprogram router. An over-long
852 return line was truncated at 256 instead of 255 characters, thereby
853 overflowing its buffer with the terminating zero. As well as fixing this, I
854 have increased the buffer size to 1024 (and made a note to document this).
856 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
857 when Exim is waiting for an SMTP response from a remote server, Exim
858 restarts its select() call on the socket, thereby resetting its timeout.
859 This is not a problem when such interrupts are rare. Somebody set up a cron
860 job to run exiwhat every 2 minutes, which is less than the normal select()
861 timeout (5 or 10 minutes). This meant that the select() timeout never
862 kicked in because it was always reset. I have fixed this by comparing the
863 time when an interrupt arrives with the time at the start of the first call
864 to select(). If more time than the timeout has elapsed, the interrupt is
865 treated as a timeout.
867 5. Some internal re-factoring in preparation for the addition of Sieve
868 extensions (by MH). In particular, the "personal" test is moved to a
869 separate function, and given an option for scanning Cc: and Bcc: (which is
870 not set for Exim filters).
872 6. When Exim created an email address using the login of the caller as the
873 local part (e.g. when creating a From: or Sender: header line), it was not
874 quoting the local part when it contained special characters such as @.
876 7. Installed new OpenBSD configuration files.
878 8. Reworded some messages for syntax errors in "and" and "or" conditions to
879 try to make them clearer.
881 9. Callout options, other than the timeout value, were being ignored when
882 verifying sender addresses in header lines. For example, when using
884 verify = header_sender/callout=no_cache
886 the cache was (incorrectly) being used.
888 10. Added a missing instance of ${EXE} to the exim_install script; this affects
889 only the Cygwin environment.
891 11. When return_path_on_delivery was set as a log selector, if different remote
892 addresses in the same message used different return paths and parallel
893 remote delivery occurred, the wrong values would sometimes be logged.
894 (Whenever a remote delivery process finished, the return path value from
895 the most recently started remote delivery process was logged.)
897 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
898 lines when AUTH and/or TLS are in use. This is the "received protocol"
899 field. Exim used to use "asmtp" for authenticated SMTP, without any
900 indication (in the protocol name) for TLS use. Now it follows the RFC and
901 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
902 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
903 names appear in log lines as well as in Received: header lines.
905 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
906 extensions, and comparison tests, and to fix some bugs.
908 14. Changes to the "personal" filter test:
910 (1) The test was buggy in that it was just doing the equivalent of
911 "contains" tests on header lines. For example, if a user's address was
912 anne@some.where, the "personal" test would incorrectly be true for
914 To: susanne@some.where
916 This test is now done by extracting each address from the header in turn,
917 and checking the entire address. Other tests that are part of "personal"
918 are now done using regular expressions (for example, to check local parts
919 of addresses in From: header lines).
921 (2) The list of non-personal local parts in From: addresses has been
922 extended to include "listserv", "majordomo", "*-request", and "owner-*",
923 taken from the Sieve specification recommendations.
925 (3) If the message contains any header line starting with "List-" it is
926 treated as non-personal.
928 (4) The test for "circular" in the Subject: header line has been removed
929 because it now seems ill-conceived.
931 15. Minor typos in src/EDITME comments corrected.
933 16. Installed latest exipick from John Jetmore.
935 17. If headers_add on a router specified a text string that was too long for
936 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
937 of string_sprintf() is now avoided.
939 18. $message_body_size was not set (it was always zero) when running the DATA
940 ACL and the local_scan() function.
942 19. For the "mail" command in an Exim filter, no default was being set for
943 the once_repeat time, causing a random time value to be used if "once" was
944 specified. (If the value happened to be <= 0, no repeat happened.) The
945 default is now 0s, meaning "never repeat". The "vacation" command was OK
946 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
947 (I found it when inspecting the code).
949 20. There is now an overall timeout for performing a callout verification. It
950 defaults to 4 times the callout timeout, which applies to individual SMTP
951 commands during the callout. The overall timeout applies when there is more
952 than one host that can be tried. The timeout is checked before trying the
953 next host. This prevents very long delays if there are a large number of
954 hosts and all are timing out (e.g. when the network connections are timing
955 out). The value of the overall timeout can be changed by specifying an
956 additional sub-option for "callout", called "maxwait". For example:
958 verify = sender/callout=5s,maxwait=20s
960 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
961 to the end before writing, but this should make it even safer).
963 22. Exim was forgetting that it had advertised PIPELINING for the second and
964 subsequent messages on an SMTP connection. It was also not resetting its
965 memory on STARTTLS and an internal HELO.
967 23. When Exim logs an SMTP synchronization error within a session, it now
968 records whether PIPELINING has been advertised or not.
970 24. Added 3 instances of "(long int)" casts to time_t variables that were being
971 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
972 rather than long int.
974 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
976 26. Added the never_mail option to autoreply.
982 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
983 crash if the getsockname() call failed; this can happen if a connection is
984 closed very soon after it is established. The problem was simply in the
985 order in which certain operations were done, causing Exim to try to write
986 to the SMTP stream before it had set up the file descriptor. The bug has
987 been fixed by making things happen in the correct order.
993 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
994 before the connection was closed, thus losing the rejection response.
996 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
997 some early Solaris releases, but causes trouble in current releases where
998 socklen_t is defined.
1000 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
1003 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
1006 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
1007 that releasing the top of it at the end releases what was used for sub-
1008 expansions (unless the block got too big). However, discard this block if
1009 the first thing is a variable or header, so that we can use its block when
1010 it is dynamic (useful for very large $message_headers, for example).
1012 6. Lookups now cache *every* query, not just the most recent. A new, separate
1013 store pool is used for this. It can be recovered when all lookup caches are
1014 flushed. Lookups now release memory at the end of their result strings.
1015 This has involved some general refactoring of the lookup sources.
1017 7. Some code has been added to the store_xxx() functions to reduce the amount
1018 of flapping under certain conditions.
1020 8. log_incoming_interface used to affect only the <= reception log lines. Now
1021 it causes the local interface and port to be added to several more SMTP log
1022 lines, for example "SMTP connection from", and rejection lines.
1024 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
1026 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
1028 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
1029 could be overwritten at the end of the current message (or the start of a
1030 new message if it was set in a HELO ACL). The value is now preserved for
1031 the duration of the SMTP connection.
1033 12. If a transport had a headers_rewrite setting, and a matching header line
1034 contained an unqualified address, that address was qualified, even if it
1035 did not match any rewriting rules. The underlying bug was that the values
1036 of the flags that permit the existence of unqualified sender and recipient
1037 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
1038 non-local messages, and by -bnq for local messages) were not being
1039 preserved with the message after it was received.
1041 13. When Exim was logging an SMTP synchronization error, it could sometimes log
1042 "next input=" as part of the text comprising the host identity instead of
1043 the correct text. The code was using the same buffer for two different
1044 strings. However, depending on which order the printing function evaluated
1045 its arguments, the bug did not always show up. Under Linux, for example, my
1046 test suite worked just fine.
1048 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
1049 doesn't work with some older versions of Perl. It has been changed to "my",
1050 which in any case is probably the better facility to use.
1052 15. A really picky compiler found some instances of statements for creating
1053 error messages that either had too many or two few arguments for the format
1056 16. The size of the buffer for calls to the DNS resolver has been increased
1057 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
1058 for addresses that have a lot of PTR records. This alleviates a problem; it
1059 does not fully solve it.
1061 17. A dnsdb lookup for PTR records that receives more data than will fit in the
1062 buffer now truncates the list and logs the incident, which is the same
1063 action as happens when Exim is looking up a host name and its aliases.
1064 Previously in this situation something unpredictable would happen;
1065 sometimes it was "internal error: store_reset failed".
1067 18. If a server dropped the connection unexpectedly when an Exim client was
1068 using GnuTLS and trying to read a response, the client delivery process
1069 crashed while trying to generate an error log message.
1071 19. If a "warn" verb in an ACL added multiple headers to a message in a single
1072 string, for example:
1074 warn message = H1: something\nH2: something
1076 the text was added as a single header line from Exim's point of view
1077 though it ended up OK in the delivered message. However, searching for the
1078 second and subsequent header lines using $h_h2: did not work. This has been
1079 fixed. Similarly, if a system filter added multiple headers in this way,
1080 the routers could not see them.
1082 20. Expanded the error message when iplsearch is called with an invalid key to
1083 suggest using net-iplsearch in a host list.
1085 21. When running tests using -bh, any delays imposed by "delay" modifiers in
1086 ACLs are no longer actually imposed (and a message to that effect is
1089 22. If a "gecos" field in a passwd entry contained escaped characters, in
1090 particular, if it contained a \" sequence, Exim got it wrong when building
1091 a From: or a Sender: header from that name. A second bug also caused
1092 incorrect handling when an unquoted " was present following a character
1093 that needed quoting.
1095 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1096 was not being matched caselessly.
1098 24. Arranged for all hyphens in the exim.8 source to be escaped with
1101 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1102 properly. Recipient callout cache records were still being keyed to include
1103 the sender, even when use_sender was set false. This led to far more
1104 callouts that were necessary. The sender is no longer included in the key
1105 when use_sender is false.
1107 26. Added "control = submission" modifier to ACLs.
1109 27. Added the ${base62d: operator to decode base 62 numbers.
1111 28. dnsdb lookups can now access SRV records.
1113 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1114 the configuration file.
1116 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1117 (-v) mode. This makes the output for a verbose queue run more intelligible.
1119 31. Added a use_postmaster feature to recipient callouts.
1121 32. Added the $body_zerocount variable, containing the number of binary zero
1122 bytes in the message body.
1124 33. The time of last modification of the "new" subdirectory is now used as the
1125 "mailbox time last read" when there is a quota error for a maildir
1128 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
1130 35. Added +ignore_unknown as a special item in host lists.
1132 36. Code for decoding IPv6 addresses in host lists is now included, even if
1133 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1134 address was recognized as an IP address, but was then not correctly decoded
1135 into binary, causing unexpected and incorrect effects when compared with
1142 1. Very minor rewording of debugging text in manualroute to say "list of
1143 hosts" instead of "hostlist".
1145 2. If verify=header_syntax was set, and a header line with an unqualified
1146 address (no domain) and a large number of spaces between the end of the
1147 name and the colon was received, the reception process suffered a buffer
1148 overflow, and (when I tested it) crashed. This was caused by some obsolete
1149 code that should have been removed. The fix is to remove it!
1151 3. When running in the test harness, delay a bit after writing a bounce
1152 message to get a bit more predictability in the log output.
1154 4. Added a call to search_tidyup() just before forking a reception process. In
1155 theory, someone could use a lookup in the expansion of smtp_accept_max_
1156 per_host which, without the tidyup, could leave open a database connection.
1158 5. Added the variables $recipient_data and $sender_data which get set from a
1159 lookup success in an ACL "recipients" or "senders" condition, or a router
1160 "senders" option, similar to $domain_data and $local_part_data.
1162 6. Moved the writing of debug_print from before to after the "senders" test
1165 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1166 problems for message scanning, either using a data ACL, or using
1167 local_scan() because the Received: header was not generated till after they
1168 were called (in order to set the time as the time of reception completion).
1169 I have revised the way this works. The header is now generated after the
1170 body is received, but before the ACL or local_scan() are called. After they
1171 are run, the timestamp in the header is updated.
1177 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1178 before starting a queue runner without re-exec. This happened only when
1179 deliver_drop_privilege was set or when the Exim user was set to root. The
1180 effect of the bug was that timeouts during subsequent deliveries caused
1181 crashes instead of being properly handled. The handler is now left at its
1182 default (and expected) setting.
1184 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1185 message, again when deliver_drop_privilege is set or Exim is run as root.
1186 The bug described in (1) was not present in this case, but the tidying up
1187 of the other signals was missing. I have made the two cases consistent.
1189 3. The ignore_target_hosts setting on a manualroute router was being ignored
1190 for hosts that were looked up using the /MX notation.
1192 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1195 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1196 operated on the sender address. After changing the $sender_address to <>
1197 for the sender address verify, Exim was re-instated it as the original
1198 (before rewriting) address, but remembering that it had rewritten it, so it
1199 wasn't rewriting it again. This bug also had the effect of breaking the
1200 sender address verification caching when the sender address was rewritten.
1202 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1203 This has been changed so that if the ip literal address matches
1204 ignore_target_hosts, the router declines.
1206 7. Added expansion conditions match_domain, match_address, and match_local_
1207 part (NOT match_host).
1209 8. The placeholder for the Received: header didn't have a length field set.
1211 9. Added code to Exim itself and to exim_lock to test for a specific race
1212 condition that could lead to file corruption when using MBX delivery. The
1213 issue is with the lockfile that is created in /tmp. If this file is removed
1214 after a process has opened it but before that process has acquired a lock,
1215 there is the potential for a second process to recreate the file and also
1216 acquire a lock. This could lead to two Exim processes writing to the file
1217 at the same time. The added code performs the same test as UW imapd; it
1218 checks after acquiring the lock that its file descriptor still refers to
1219 the same named file.
1221 10. The buffer for building added header lines was of fixed size, 8192 bytes.
1222 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1225 11. Added the smtp_active_hostname option. If used, this will typically be made
1226 to depend on the incoming interface address. Because $interface_address is
1227 not set up until the daemon has forked a reception process, error responses
1228 that can happen earlier (such as "too many connections") no longer contain
1231 12. If an expansion in a condition on a "warn" statement fails because a lookup
1232 defers, the "warn" statement is abandoned, and the next ACL statement is
1233 processed. Previously this caused the whole ACL to be aborted.
1235 13. Added the iplsearch lookup type.
1237 14. Added ident_timeout as a log selector.
1239 15. Added tls_certificate_verified as a log selector.
1241 16. Added a global option tls_require_ciphers (compare the smtp transport
1242 option of the same name). This controls incoming TLS connections.
1244 17. I finally figured out how to make tls_require_ciphers do a similar thing
1245 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1246 before starting the TLS session.
1248 18. Tabs are now shown as \t in -bP output.
1250 19. If the log selector return_path_on_delivery was set, Exim crashed when
1251 bouncing a message because it had too many Received: header lines.
1253 20. If two routers both had headers_remove settings, and the first one included
1254 a superfluous trailing colon, the final name in the first list and the
1255 first name in the second list were incorrectly joined into one item (with a
1256 colon in the middle).
1262 1. Added -C and -D options to the exinext utility, mainly to make it easier
1263 to include in the automated testing, but these could be helpful when
1264 multiple configurations are in use.
1266 2. The exinext utility was not formatting the output nicely when there was
1267 an alternate port involved in the retry record key, nor when there was a
1268 message id as well (for retries that were specific to a specific message
1269 and a specific host). It was also confused by IPv6 addresses, because of
1270 the additional colons they contain. I have fixed the IPv4 problem, and
1271 patched it up to do a reasonable job for IPv6.
1273 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1274 delivery, the log line now contains "pipelined" if PIPELINING was used.
1276 4. An SMTP transport process used to panic and die if the bind() call to set
1277 an explicit outgoing interface failed. This has been changed; it is now
1278 treated in the same way as a connect() failure.
1280 5. A reference to $sender_host_name in the part of a conditional expansion
1281 that was being skipped was still causing a DNS lookup. This no longer
1284 6. The def: expansion condition was not recognizing references to header lines
1285 that used bh_ and bheader_.
1287 7. Added the _cache feature to named lists.
1289 8. The code for checking quota_filecount in the appendfile transport was
1290 allowing one more file than it should have been.
1292 9. For compatibility with Sendmail, the command line option
1300 and sets the incoming protocol and host name (for trusted callers). The
1301 host name and its colon can be omitted when only the protocol is to be set.
1302 Note the Exim already has two private options, -pd and -ps, that refer to
1303 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1304 "s", but I don't think that's a major issue.
1306 10. A number of refactoring changes to the code, none of which should affect
1309 (a) The number of logging options was getting close to filling up the
1310 32-bit word that was used as a bit map. I have split them into two classes:
1311 those that are passed in the argument to log_write(), and those that are
1312 only ever tested independently outside of that function. These are now in
1313 separate 32-bit words, so there is plenty of room for expansion again.
1314 There is no change in the user interface or the logging behaviour.
1316 (b) When building, for example, log lines, the code previously used a
1317 macro that called string_cat() twice, in order to add two strings. This is
1318 not really sufficiently general. Furthermore, there was one instance where
1319 it was actually wrong because one of the argument was used twice, and in
1320 one call a function was used. (As it happened, calling the function twice
1321 did not affect the overall behaviour.) The macro has been replaced by a
1322 function that can join an arbitrary number of extra strings onto a growing
1325 (c) The code for expansion conditions now uses a table and a binary chop
1326 instead of a serial search (which was left over from when there were very
1327 few conditions). Also, it now recognizes conditions like "pam" even when
1328 the relevant support is not compiled in: a suitably worded error message is
1329 given if an attempt is made to use such a condition.
1331 11. Added ${time_interval:xxxxx}.
1333 12. A bug was causing one of the ddress fields not to be passed back correctly
1334 from remote delivery subprocesses. The field in question was not being
1335 subsequently used, so this caused to problems in practice.
1337 13. Added new log selectors queue_time and deliver_time.
1339 14. Might have fixed a bug in maildirsizefile handling that threw up
1340 "unexpected character" debug warnings, and recalculated the data
1341 unnecessarily. In any case, I expanded the warning message to give more
1344 15. Added the message "Restricted characters in address" to the statements in
1345 the default ACL that block characters like @ and % in local parts.
1347 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
1348 Three changes have been made:
1350 (a) There was a serious bug; a negative response to MAIL caused the whole
1351 recipient domain to be cached as invalid, thereby blocking all messages
1352 to all local parts at the same domain, from all senders. This bug has
1353 been fixed. The domain is no longer cached after a negative response to
1354 MAIL if the sender used is not empty.
1356 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1359 (c) A new callout option, "use_sender" has been added for people who want
1360 the modified behaviour.
1366 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1369 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1370 indeed breaks things for older releases.
1372 3. Added additional logging to the case where there is a problem reading data
1373 from a filter that is running in a subprocess using a pipe, in order to
1374 try to track down a specific problem.
1376 4. Testing facility fudge: when running in the test harness and attempting
1377 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1378 getting "No route to host". Convert this to a timeout.
1380 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1383 6. Some OS don't have socklen_t but use size_t instead. This affects the
1384 fifth argument of getsockopt() amongst other things. This is now
1385 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1386 can be set for individual OS. I have set it for SunOS5, OSF1, and
1387 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1388 some earlier ones do not.
1390 7. Change 4.30/15 was not doing the test caselessly.
1392 8. The standard form for an IPv6 address literal was being rejected by address
1393 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1394 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1395 this, as well as the form without the "IPv6" on the front (but only when
1396 address literals are enabled, of course).
1398 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
1400 10. Exim crashed if a message with an empty sender address specified by -f
1401 encountered a router with an errors_to setting. This could be provoked only
1402 by a command such as
1406 where an empty string was supplied; "<>" did not hit this bug.
1408 11. Installed PCRE release 4.5.
1410 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1411 remained set. It is now erased.
1413 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1414 times from message ids (which are base 36 rather than the normal 62).
1416 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1417 were being counted as actual protocol errors, and logged if the log
1418 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1419 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1420 and DATA following a set of rejected RCPTs do not count as protocol errors.
1421 In other words, Exim assumes they were pipelined, though this may not
1422 actually be the case. Of course, in all cases the client gets an
1423 appropriate error code.
1425 15. If a lookup fails in an ACL condition, a message about the failure may
1426 be available; it is used if testing the ACL cannot continue, because most
1427 such messages specify what the cause of the deferral is. However, some
1428 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1429 that caused an old message to be retained and used if a later statement
1430 caused a defer, replacing the real cause of the deferral.
1432 16. If an IP address had so many PTR records that the DNS lookup buffer
1433 was not large enough to hold them, Exim could crash while trying to process
1434 the truncated data. It now detects and logs this case.
1436 17. Further to 4.21/58, another change has been made: if (and only if) the
1437 first line of a message (the first header line) ends with CRLF, a bare LF
1438 in a subsequent header line has a space inserted after it, so as not to
1439 terminate the header.
1441 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
1442 unnecessarily, used atoi() instead of strtol(), and didn't check the
1443 termination when getting file sizes from file names by regex.
1445 19. Completely re-implemented the support for maildirsize files, in the light
1446 of a number of problems with the previous contributed implementation
1447 (4.30/29). In particular:
1449 . If the quota is zero, the maildirsize file is maintained, but no quota is
1452 . If the maildir directory does not exist, it is created before any attempt
1453 to write a maildirsize file.
1455 . The quota value in the file is just a cache; if the quota is changed in
1456 the transport, the new value overrides.
1458 . A regular expression is available for excluding directories from the
1461 20. The autoreply transport checks the characters in options that define the
1462 message's headers; it allows continued headers, but it was checking with
1463 isspace() after an embedded newline instead of explicitly looking for a
1466 21. If all the "regular" hosts to which an address was routed had passed their
1467 expiry times, and had not reached their retry times, the address was
1468 bounced, even if fallback hosts were defined. Now Exim should go on to try
1471 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1472 equivalent code in the SMTP transport. Some hosts send humungous responses
1473 to HELO/EHLO, more than 1024 it seems.
1475 23. Refactoring: code in filter.c used (void *) for "any old type" but this
1476 gives compiler warnings in some environments. I've now done it "properly",
1479 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1480 (because of problems with the built-in one) was declared to return uschar *
1481 instead of char *, causing compiler failure.
1483 25. Fixed a file descriptor leak when processing alias/forward files.
1485 26. Fixed a minor format string issue in dbfn.c.
1487 27. Typo in exim.c: ("dmbnz" for "dbmnz").
1489 28. If a filter file refered to $h_xxx or $message_headers, and the headers
1490 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1493 29. When a sender address is verified, it is cached, to save repeating the test
1494 when there is more than one recipient in a message. However, when the
1495 verification involves a callout, it is possible for different callout
1496 options to be set for different recipients. It is too complicated to keep
1497 track of this in the cache, so now Exim always runs a verification when a
1498 callout is required, relying on the callout cache for the optimization.
1499 The overhead is duplication of the address routing, but this should not be
1502 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
1503 to be verified with callout=postmaster, and the main callout worked but the
1504 postmaster check failed, the verification correctly failed. However, if a
1505 subsequent RCPT command asked for sender verification *without* the
1506 postmaster check, incorrect caching caused this verification also to fail,
1509 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1510 it was not caching the DNS options (qualify_single, search_parents) that
1511 were used when the lookup failed. A subsequent lookup with different
1512 options therefore always gave the same answer, though there were cases
1513 where it should not have. (Example: a "domains = !$mx_any" option on a
1514 dnslookup router: the "domains" option is always processed without any
1515 widening, but the router might have qualify_single set.) Now Exim uses the
1516 cached value only when the same options are set.
1518 32. Added John Jetmore's "exipick" utility to the distribution.
1520 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
1521 than a timeout (e.g. a certificate is required, and is not provided), an
1522 Exim server now closes the connection immediately. Previously it waited for
1523 the client to close - but if the client is SSL, it seems that they each
1524 wait for each other, leading to a delay before one of them times out.
1526 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1527 maintained 0.8.x compatibility because I don't think many are using it, and
1528 it is clearly obsolete.
1530 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1533 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1534 client certificate was expired. A simple patch fixes this, though I don't
1535 understand the full logic of why the verify callback is called multiple
1538 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1539 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1540 which causes problems with some clients (such as the Certicom SSL Plus
1541 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1542 disables the coutermeasure allowing Eudora to connect."
1544 38. Exim was not checking that a write() to a log file succeeded. This could
1545 lead to Bad Things if a log got too big, in particular if it hit a file
1546 size limit. Exim now panics and dies if it cannot write to a log file, just
1547 as it does if it cannot open a log file.
1549 39. Modified OS/Makefile-Linux so that it now contains
1551 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
1553 The two -D definitions ensure that Exim is compiled with large file
1554 support, which makes it possible to handle log files that are bigger than
1557 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1558 instance) a domain was checked against a named list that involved a lookup,
1559 causing $domain_data to be set, then another domain was checked against the
1560 same list, then the first domain was re-checked, the value of $domain_data
1561 after the final check could be wrong. In particular, if the second check
1562 failed, it could be set empty. This bug probably also applied to
1565 41. The strip_trailing_dot option was not being applied to the address given
1566 with the -f command-line option.
1568 42. The code for reading a message's header from the spool was incrementing
1569 $received_count, but never initializing it. This meant that the value was
1570 incorrect (doubled) while delivering a message in the same process in which
1571 it was received. In the most common configuration of Exim, this never
1572 happens - a fresh exec is done - but it can happen when
1573 deliver_drop_privilege is set.
1575 43. When Exim logs an SMTP synchronization error - client data sent too soon -
1576 it now includes up to 150 characters of the unexpected data in the log
1579 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1580 and building data strings. The size of both of these buffers was 10 000
1581 bytes - far larger than anybody would *ever* want, thought I. Needless to
1582 say, somebody hit the limit. I have increased the maximum line length to
1583 20 000 and the maximum data length of concatenated lines to 100 000. I have
1584 also fixed two bugs, because there was no checking on these buffers. Tsk,
1585 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1586 buffer is too small.
1588 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1589 lsearch lookups. Now it does.
1591 46. When parsing a route_list item in a manualroute router, a fixed-length
1592 buffer was used for the list of hosts. I made this 1024 bytes long,
1593 thinking that nobody would ever have a list of hosts that long. Wrong.
1594 Somebody had a whole pile of complicated expansion conditions, and the
1595 string was silently truncated, leading to an expansion error. It turns out
1596 that it is easier to change to an unlimited length (owing to other changes
1597 that have happened since this code was originally written) than to build
1598 structure for giving a limitation error. The length of the item that
1599 expands into the list of hosts is now unlimited.
1601 47. The lsearch lookup could not handle data where the length of text line was
1602 more than 4095 characters. Such lines were truncated, leading to shortened
1603 data being returned. It should now handle lines of any length.
1605 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1606 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1609 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
1610 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1611 no longer happens in comment lines. A list of replacements is now placed
1612 at the head of all of the source files, except those whose only change is
1613 to replace PERL_COMMAND in the very first #! line.
1615 50. Replaced the slow insertion sort in queue.c, for sorting the list of
1616 messages on the queue, with a bottom-up merge sort, using code contributed
1617 by Michael Haardt. This should make operations like -bp somewhat faster on
1618 large queues. It won't affect queue runners, except when queue_run_in_order
1621 51. Installed eximstats 1.31 in the distribution.
1623 52. Added support for SRV lookups to the dnslookup router.
1625 53. If an ACL referred to $message_body or $message_body_end, the value was not
1626 reset for any messages that followed in the same SMTP session.
1628 54. The store-handling optimization for building very long strings was not
1629 differentiating between the different store pools. I don't think this
1630 actually made any difference in practice, but I've tidied it.
1632 55. While running the routers to verify a sender address, $sender_address
1633 was still set to the sender address. This is wrong, because when routing to
1634 send a bounce to the sender, it would be empty. Therefore, I have changed
1635 it so that, while verifying a sender address, $sender_address is set to <>.
1636 (There is no change to what happens when verifying a recipient address.)
1638 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1639 target A or AAAA records (if not already returned) without resetting the
1640 qualify_single or search_parents options of the DNS resolver. These are
1641 inappropriate in this case because the targets of MX and SRV records must
1642 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1643 target that, when qualified, matched something in the local domain. These
1644 two options are now turned off when doing these lookups.
1646 57. It seems that at least some releases of Reiserfs (which does not have the
1647 concept of a fixed number of inodes) returns zero and not -1 for the
1648 number of available inodes. This interacted badly with check_spool_inodes,
1649 which assumed that -1 was the "no such thing" setting. What I have done is
1650 to check that the total number of inodes is greater than zero before doing
1651 the test of how many are available.
1653 58. When a "warn" ACL statement has a log_message modifier, the message is
1654 remembered, and not repeated. This is to avoid a lot of repetition when a
1655 message has many recipients that cause the same warning to be written.
1656 Howewer, Exim was preserving the list of already written lines for an
1657 entire SMTP session, which doesn't seem right. The memory is now reset if a
1658 new message is started.
1660 59. The "rewrite" debugging flag was not showing the result of rewriting in the
1661 debugging output unless log_rewrite was also set.
1663 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1664 of (int)(handle) when we know that handle contains (void *)(-1).
1666 61. The Exim daemon panic-logs an error return when it closes the incoming
1667 connection. However "connection reset by peer" seems to be common, and
1668 isn't really an error worthy of noting specially, so that particular error
1671 62. When Exim is trying to find all the local interfaces, it used to panic and
1672 die if the ioctl to get the interface flags failed. However, it seems that
1673 on at least one OS (Solaris 9) it is possible to have an interface that is
1674 included in the list of interfaces, but for which you get a failure error
1675 for this call. This happens when the interface is not "plumbed" into a
1676 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1677 failure of the "get flags" call assumes that the interface is down.
1679 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
1680 makes life easier for people who are doing arithmetic on fields extracted
1681 from dates, where you often get leading zeros that should not be
1682 interpreted as octal.
1684 64. Added qualify_domain to the redirect router, to override the global
1687 65. If a pathologically long header line contained very many addresses (the
1688 report of this problem mentioned 10 000) and each of them was rewritten,
1689 Exim could use up a very large amount of memory. (It kept on making new
1690 copies of the header line as it rewrote, and never released the old ones.)
1691 At the expense of a bit more processing, the header rewriting function has
1692 been changed so that it no longer eats memory in this way.
1694 66. The generation of the Received: header has been moved from the time that a
1695 message starts to be received, to the time that it finishes. The timestamp
1696 in the Received: header should now be very close to that of the <= log
1697 line. There are two side-effects of this change:
1699 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1700 logged header lines no longer include the local Received: line, because
1701 it has not yet been created. The same applies to a copy of the message
1702 that is returned to a non-SMTP sender when a message is rejected.
1704 (b) When a filter file is tested using -bf, no additional Received: header
1705 is added to the test message. After some thought, I decided that this
1708 This change does not affect the value of $received_for. It is still set
1709 after address rewriting, but before local_scan() is called.
1711 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
1713 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1714 gave an unhelpful panic error message, and a defer error. I have managed to
1715 change this behaviour so that it now rejects any supplied certificate,
1716 which seems right, as the list of acceptable certificates is empty.
1718 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1719 gave an unhelpful defer error. I have not managed to make this reject any
1720 supplied certificates, but the error message it gives is "no certificate
1721 supplied", which is not helpful.
1723 70. exigrep's output now also includes lines that are not associated with any
1724 message, but which match the given pattern. Implemented by a patch from
1725 Martin Sluka, which also tidied up the Perl a bit.
1727 71. Recipient callout verification, like sender verification, was using <> in
1728 the MAIL FROM command. This isn't really the right thing, since the actual
1729 sender may affect whether the remote host accepts the recipient or not. I
1730 have changed it to use the actual sender in the callout; this means that
1731 the cache record is now keyed on a recipient/sender pair, not just the
1732 recipient address. There doesn't seem to be a real danger of callout loops,
1733 since a callout by the remote host to check the sender would use <>.
1734 [SEE ABOVE: changed after hitting problems.]
1736 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1737 temporary errors. However, in the case of such a code being given after
1738 the end of a data transmission (i.e. after ".") Exim was failing to write
1739 a retry record for the message. (Yes, there was some broken host that was
1740 actually sending 8xx at this point.)
1742 73. An unknown lookup type in a host list could cause Exim to panic-die when
1743 the list was checked. (An example that provoked this was putting <; in the
1744 middle of a list instead of at the start.) If this happened during a DATA
1745 ACL check, a -D file could be left lying around. This kind of configuration
1746 error no longer causes Exim to die; instead it causes a defer errror. The
1747 incident is still logged to the main and panic logs.
1749 74. Buglet left over from Exim 3 conversion. The message "too many messages
1750 in one connection" was written to the rejectlog but not the mainlog, except
1751 when address rewriting (yes!) was being logged.
1753 75. Added write_rejectlog option.
1755 76. When a system filter was run not as root (that is, when system_filter_user
1756 was set), the values of the $n variables were not being returned to the
1757 main process; thus, they were not subsequently available in the $sn
1760 77. Added +return_path_on_delivery log selector.
1762 78. A connection timeout was being treated differently from recipients deferred
1763 when testing hosts_max_try with a message that was older than the host's
1764 retry timeout. (The host should not be counted, thus allowing all hosts to
1765 be tried at least once before bouncing.) This may have been the cause of an
1766 occasionally reported bug whereby a message would remain on the queue
1767 longer than the retry timeout, but would be bounced if a delivery was
1768 forced. I say "may" because I never totally pinned down the problem;
1769 setting up timeout/retry tests is difficult. See also the next item.
1771 79. The ultimate address timeout was not being applied to errors that involved
1772 a combination of host plus message (for example, a timeout on a MAIL
1773 command). When an address resolved to a number of possible hosts, and they
1774 were not all tried for each delivery (e.g. because of hosts_max_try), a
1775 message could remain on the queue longer than the retry timeout.
1777 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1780 81. Fixed an obscure SMTP outgoing bug which required at least the following
1781 conditions: (a) there was another message waiting for the same server;
1782 (b) the server returned 5xx to all RCPT commands in the first message so
1783 that the message was not completed; (c) the server dropped the connection
1784 or gave a negative response to the RSET that Exim sends to abort the
1785 transaction. The observed case was a dropped connection after DATA that had
1786 been sent in pipelining mode. That is, the server had advertised PIPELINING
1787 but was not implementing it correctly. The effect of the bug was incorrect
1788 behaviour, such as trying another host, and this could lead to a crash.
1794 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1795 and daemon.c were passed as pointers to ints; they should have been
1796 pointers to socklen_t variables (which are typically unsigned ints).
1798 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1801 3. Fixed a really odd bug that affected only the testing scheme; patching a
1802 certain fixed string in the binary changed the value of another string that
1803 happened to be identical to the end of the original first string.
1805 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1806 name", it returns that address as the IP address. On some operating
1807 systems (e.g. Solaris), it also passes back the IP address string as the
1808 "host name". However, on others (e.g. Linux), it passes back an empty
1809 string. Exim wasn't checking for this, and was changing the host name to an
1810 empty string, assuming it had been canonicized.
1812 5. Although rare, it is permitted to have more than one PTR record for a given
1813 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1814 all the names associated with an address, because they do in Solaris.
1815 However, it seems that they do not in Linux for data that comes from the
1816 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1817 I found this out when I moved to a new Linux workstation and tried to run
1818 the Exim test suite.
1820 To get round this problem I have changed the code so that it now does its
1821 own call to the DNS to look up PTR records when searching for a host name.
1822 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1823 addresses that are only in /etc/hosts are still found.
1825 This behaviour is, however, controlled by an option called host_lookup_
1826 order, which defaults to "bydns:byaddr". If people want to use the other
1827 order, or indeed, just use one or the other means of lookup, they can
1828 specify it in this variable.
1830 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1831 some operating systems, this comes back from gethostbyaddr() as an empty
1832 string, and this is what Exim used to test for. However, it seems that in
1833 other systems, "." is yielded. Exim now tests for this case too.
1835 7. The values of check_spool_space and check_log_space are now held internally
1836 as a number of kilobytes instead of an absolute number of bytes. If a
1837 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1838 kilobyte. This means that much larger values can be stored.
1840 8. Exim monitor: an attempt to get the action menu when not actually pointing
1841 at a message produces an empty menu entitled "No message selected". This
1842 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1843 no entries in it ("Shell widget menu has zero width and/or height"). So I
1844 have added a single, blank menu entry in this case.
1846 9. Added ${quote_local_part.
1848 10. MIME decoding is now applied to the contents of Subject: header lines when
1851 11. Now that a reference to $sender_host_address automatically causes a reverse
1852 lookup to occur if necessary (4.13/18), there is no need to arrange for a
1853 host lookup before query-style lookups in lists that might use this
1854 variable. This has therefore been abolished, and the "net-" prefix is no
1855 longer necessary for query-style lookups.
1857 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
1858 have been a typo for LFLAGS, so it has been changed.
1860 13. The install script calls Exim with "-C /dev/null" in order to find the
1861 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
1862 to be output. Howeve, since Exim outputs its version number before the
1863 error, it didn't break the script. It just looked ugly. I fixed this by
1864 always allowing "-C /dev/null" if the caller is root.
1866 14. Ignore overlarge ACL variable number when reading spool file - insurance
1867 against a later release with more variables having written the file.
1869 15. The standard form for an IPv6 address literal was being rejected by EHLO.
1870 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1871 this, as well as the form without the "IPv6" on the front.
1873 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
1874 OS/Makefile-Darwin file.
1876 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
1877 only to LDAP libraries that do not have LDAP_OPT_DEREF.
1879 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
1880 variable. However, some OS use ints for inodes. I've added cast to long int
1881 to get rid of the compiler warning.
1883 19. I had forgotten to lock out "/../" in configuration file names when
1884 ALT_CONFIG_PREFIX was set.
1886 20. Routers used for verification do not need to specify transports. However,
1887 if such a router generated a host list, and callout was configured, Exim
1888 crashed, because it could not find a port number from the (non-existent)
1889 transport. It now assumes port 25 in this circumstance.
1891 21. Added the -t option to exigrep.
1893 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
1894 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
1895 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
1896 them is set, LOOKUP_LSEARCH is forced.
1898 23. "exim -bV" now outputs a list of lookups that are included in the binary.
1900 24. Added sender and host information to the "rejected by local_scan()" log
1901 line; previously there was no indication of these.
1903 25. Added .include_if_exists.
1905 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
1906 Linux. It turns out that not all file systems support this. Apparently some
1907 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
1908 do it.) To cope with this, the error EINVAL, which means that sync-ing is
1909 not supported on the file descriptor, is now ignored when Exim is trying to
1910 sync a directory. This applies only to Linux.
1912 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
1914 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
1915 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
1918 29. Added support for maildirsize files from supplied patch (modified a bit).
1920 30. The use of :fail: followed by an empty string could lead Exim to respond to
1921 sender verification failures with (e.g.):
1923 550 Verification failed for <xxx>
1924 550 Sender verify failed
1926 where the first response line was missing the '-' that indicates it is not
1927 the final line of the response.
1929 31. The loop for finding the name of the user that called Exim had a hardwired
1930 limit of 10; it now uses the value of finduser_retries, which is used for
1931 all other user lookups.
1933 32. Added $received_count variable, available in data and not_smtp ACLs, and at
1936 33. Exim was neglecting to zero errno before one call of strtol() when
1937 expanding a string and expecting an integer value. On some systems this
1938 resulted in spurious "integer overflow" errors. Also, it was casting the
1939 result into an int without checking.
1941 34. Testing for a connection timeout using "timeout_connect" in the retry rules
1942 did not work. The code looks as if it has *never* worked, though it appears
1943 to have been documented since at least releast 1.62. I have made it work.
1945 35. The "timeout_DNS" error in retry rules, also documented since at least
1946 1.62, also never worked. As it isn't clear exactly what this means, and
1947 clearly it isn't a major issue, I have abolished the feature by treating it
1948 as "timeout", and writing a warning to the main and panic logs.
1950 36. The display of retry rules for -brt wasn't always showing the error code
1953 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
1954 timeout_connect_A, timeout_connect_MX.
1956 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
1957 to the empty sender.
1959 39. The daemon was not analysing the content of -oX till after it had closed
1960 stderr and disconnected from the controlling terminal. This meant that any
1961 syntax errors were only noted on the panic log, and the return code from
1962 the command was 0. By re-arranging the code a little, I've made the
1963 decoding happen first, so such errors now appear on stderr, and the return
1964 code is 1. However, the actual setting up of the sockets still happens in
1965 the disconnected process, so errors there are still only recorded on the
1968 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
1969 connections (as happens on some IP stacks) was logged at start up time as
1970 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
1971 it from "IPv6 and IPv4", which means that two separate sockets are being
1974 41. The debug output for gethostbyname2() or getipnodebyname() failures now
1975 says whether AF_INET or AF_INET6 was passed as an argument.
1977 42. Exiwhat output was messed up when time zones were included in log
1980 43. Exiwhat now gives more information about the daemon's listening ports,
1981 and whether -tls-on-connect was used.
1983 44. The "port" option of the smtp transport is now expanded.
1985 45. A "message" modifier in a "warn" statement in a non-message ACL was being
1986 silently ignored. Now an error message is written to the main and panic
1989 46. There's a new ACL modifier called "logwrite" which writes to a log file
1990 as soon as it is encountered.
1992 47. Added $local_user_uid and $local_user_gid at routing time.
1994 48. Exim crashed when trying to verify a sender address that was being
1997 49. Exim was recognizing only a space character after ".include". It now also
1998 recognizes a tab character.
2000 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
2001 extracting the relevant information from the specification. The man page no
2002 longer contains scrambled data for the -d option, and I've added a section
2003 at the front about calling Exim under different names.
2005 51. Added "extra_headers" argument to the "mail" command in filter files.
2007 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
2010 53. Installed eximstats 1.29.
2012 54. Added transport_filter_timeout as a generic transport option.
2014 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
2015 Cc: header lines. This was required by RFC 822, but it not required by RFC
2018 56. Exim used to add From:, Date:, and Message-Id: header lines to any
2019 incoming messages that did not have them. Now it does so only if the
2020 message originates locally, that is, if there is no associated remote host
2021 address. When Resent- header lines are present, this applies to the Resent-
2022 lines rather than the non-Resent- lines.
2024 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
2025 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
2027 58. Messages for configuration errors now include the name of the main
2028 configuration file - useful now that there may be more than one file in a
2029 list (.included file names were always shown).
2031 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
2032 for those rare installations that do not start the daemon as root or run it
2033 setuid root. I've cut out the call to initgroups() if the daemon is not
2036 60. The Exim user and group can now be bound into the binary as text strings
2037 that are looked up at the start of Exim's processing.
2039 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
2041 62. Added $mailstore_basename variable.
2043 63. Installed patch to sieve.c from Michael Haardt.
2045 64. When Exim failed to open the panic log after failing to open the main log,
2046 the original message it was trying to log was written to stderr and debug
2047 output, but if they were not available (the usual case in production), it
2048 was lost. Now it is written to syslog before the two lines that record the
2049 failures to open the logs.
2051 65. Users' Exim filters run in subprocesses under the user's uid. It is
2052 possible for a "deliver" command or an alias in a "personal" command to
2053 provoke an address rewrite. If logging of address rewriting is configured,
2054 this fails because the process is not running as root or exim. There may be
2055 a better way of dealing with this, but for the moment (because 4.30 needs
2056 to be released), I have disabled address rewrite logging when running a
2057 filter in a non-root, non-exim process.
2063 1. The buildconfig auxiliary program wasn't quoting the value set for
2064 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
2065 not defined. This bug was masked in 4.22 by the effect that was fixed in
2068 2. Some messages that were rejected after a message id was allocated were
2069 shown as "incomplete" by exigrep. It no longer does this for messages that
2070 are rejected by local_scan() or the DATA or non-SMTP ACLs.
2072 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
2073 have allow_domain_literals set, the ID did not get logged in the <= line.
2074 Domain literals are now always recognized in Message-ID: header lines.
2076 4. The first argument for a ${extract expansion item is the key name or field
2077 number. Leading and trailing spaces in this item were not being ignored,
2078 causing some misleading effects.
2080 5. When deliver_drop_privilege was set, single queue runner processes started
2081 manually (i.e. by the command "exim -q") or by the daemon (which uses the
2082 same command in the process it spins off) were not dropping privilege.
2084 6. When the daemon running as "exim" started a queue runner, it always
2085 re-executed Exim in the spun-off process. This is a waste of effort when
2086 deliver_drop_privilege is set. The new process now just calls the
2087 queue-runner function directly.
2093 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2096 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2097 ignored. Though the use of -oP was forcing the writing of a pid file, it
2098 was always written to the default place.
2100 3. If the message "no IP address found for host xxxx" is generated during
2101 incoming verification, it is now followed by identification of the incoming
2102 connection (so you can more easily find what provoked it).
2104 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2106 5. Added some features to "harden" Exim a bit more against certain attacks:
2108 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2109 be put in Local/Makefile. This is like the never_users runtime option,
2110 but it cannot be overridden. The default setting is "root".
2112 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2113 prefix string with which any file named in a -C command line option
2116 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2117 is retained for -C and -D only if the caller of Exim is root. Without
2118 it, the exim user may also use -C and -D and retain privilege.
2120 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2121 command line option is disabled.
2123 6. Macro names set by the -D option must start with an upper case letter, just
2124 like macro names defined in the configuration file.
2126 7. Added "dereference=" facility to LDAP.
2128 8. Two instances of the typo "uknown" in the source files are fixed.
2130 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2131 the Configure-Makefile script screwed up while processing it.
2133 10. Incorporated PCRE 4.4.
2135 11. The SMTP synchronization check was not operating right at the start of an
2136 SMTP session. For example, it could not catch a HELO sent before the client
2137 waited for the greeting. There is now a check for outstanding input at the
2138 point when the greeting is written. Because of the duplex, asynchronous
2139 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2140 way, but not yet received, when the check is performed.
2142 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2143 on TCP/IP sockets, because this apparently causes some broken clients to
2146 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2147 unchanged) from the Cygwin maintainer.
2149 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
2150 was supported instead of testing for mbx. Effectively a typo.
2152 15. The spa authenticator server code was not checking that the input it
2153 received was valid base64.
2155 16. The debug output line for the "set" modifier in ACLs was not showing the
2156 name of the variable that was being set.
2158 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
2160 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
2161 lookup on its own. Something else was needed to trigger the lookup. For
2162 example, a match in host_lookup or the need for a host name in a host list.
2163 Now, if $sender_host_name is referenced and the host name has not yet been
2164 looked up, a lookup is performed. If the lookup fails, the variable remains
2165 empty, and $host_lookup_failed is set to "1".
2167 19. Added "eqi" as a case-independent comparison operator.
2169 20. The saslauthd authentication condition could segfault if neither service
2170 nor realm was specified.
2172 21. If an overflowing value such as "2048M" was set for message_size_limit, the
2173 error message that was logged was misleading, and incoming SMTP
2174 connections were dropped. The message is now more accurate, and temporary
2175 errors are given to SMTP connections.
2177 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
2178 (except RSET) with a 421 error, until QUIT is received. However, it was
2179 failing to send a response to QUIT.
2181 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
2182 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2183 ACL is now run after the helo_try_verify_hosts code.
2185 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2186 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2187 case-independent, so other case variants are also recognized). Apparently
2188 some systems use these upper case variants.
2190 25. If more than two messages were waiting for the same host, and a transport
2191 filter was specified for the transport, Exim sent two messages over the
2192 same TCP/IP connection, and then failed with "socket operation on non-
2193 socket" when it tried to send the third.
2195 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
2197 27. The extern definition of crypt16() in expand.c was not being excluded when
2198 the OS had its own crypt16() function.
2200 28. Added bounce_return_body as a new option, and bounce_return_size_limit
2201 as a preferred synonym for return_size_limit, both as an option and as an
2204 29. Added LIBS=-liconv to OS/Makefile-OSF1.
2206 30. Changed the default configuration ACL to relax the local part checking rule
2207 for addresses that are not in any local domains. For these addresses,
2208 slashes and pipe symbols are allowed within local parts, but the sequence
2209 /../ is explicitly forbidden.
2211 31. SPA server authentication was not clearing the challenge buffer before
2214 32. log_message in a "warn" ACL statement was writing to the reject log as
2215 well as to the main log, which contradicts the documentation and doesn't
2216 seem right (because no rejection is happening). So I have stopped it.
2218 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2219 However, I am unable to do any testing of this.
2221 34. Fixed an infelicity in the appendfile transport. When checking directories
2222 for a mailbox, to see if any needed to be created, it was accidentally
2223 using path names with one or more superfluous leading slashes; tracing
2224 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
2226 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2227 contents are added to the log line that is written for every discarded
2228 recipient. (Previously a log_message setting was ignored.)
2230 36. The ${quote: operator now quotes the string if it is empty.
2232 37. The install script runs exim in order to find its version number. If for
2233 some reason other than non-existence or emptiness, which it checks, it
2234 could not run './exim', it was installing it with an empty version number,
2235 i.e. as "exim-". This error state is now caught, and the installation is
2238 38. An argument was missing from the function that creates an error message
2239 when Exim fails to connect to the socket for saslauthd authentication.
2240 This could cause Exim to crash, or give a corrupted message.
2242 39. Added isip, isip4, and isip6 to ${if conditions.
2244 40. The ACL variables $acl_xx are now saved with the message, and can be
2245 accessed later in routers, transports, and filters.
2247 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
2248 strings in the file are not string-expanded.
2250 42. If a MAIL command specified a SIZE value that was too large to fit into an
2251 int variable, the check against message_size_limit failed. Such values are
2252 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2253 day this will have to be increased, but I don't think I want to be around
2254 when emails are that large.
2261 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2262 iconv() is not standard in FreeBSD.
2264 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2265 IPv6 enabled. The observed symptom was a segmentation fault on return from
2266 the function os_common_find_running_interfaces() in src/os.c.
2268 3. In the check_special_case() function in daemon.c I had used "errno" as an
2269 argument name, which causes warnings on some systems. This was basically a
2270 typo, since it was named "eno" in the comments!
2272 4. The code that waits for the clock to tick (at a resolution of some fraction
2273 of a second) so as to ensure message-id uniqueness was always waiting for
2274 at least one whole tick, when it could have waited for less. [This is
2275 almost certainly not relevant at current processor speeds, where it is
2276 unlikely to ever wait at all. But we try to future-proof.]
2278 5. The function that sleeps for a time interval that includes fractions of a
2279 second contained a race. It did not block SIGALRM between setting the
2280 timer, and suspending (a couple of lines later). If the interval was short
2281 and the sigsuspend() was delayed until after it had expired, the suspension
2282 never ended. On busy systems this could lead to processes getting stuck for
2285 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2286 process, before it forks any delivery processes. The open lookup caching
2287 mechanism meant that the open file or database connection was passed into
2288 the delivery process. The problem was that delivery processes always tidy
2289 up cached lookup data. This could cause a problem for the next delivery
2290 process started by the queue runner, because the external queue runner
2291 process does not know about the closure. So the next delivery process
2292 still has data in the lookup cache. In the case of a file lookup, there was
2293 no problem because closing a file descriptor in a subprocess doesn't affect
2294 the parent. However, if the lookup was caching a connection to a database,
2295 the connection was closed, and the second delivery process was likely to
2296 see errors such as "PGSQL: query failed: server closed the connection
2297 unexpectedly". The problem has been fixed by closing all cached lookups
2298 in a queue runner before running a delivery process.
2300 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2301 seem to have the "const" qualifier which it has on other OS. I've
2304 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2305 *of the same type* (client or server) with the same public name that an
2306 error should be diagnosed.
2308 9. When Exim looked up a host name for an IP address, but failed to find the
2309 original IP address when looking up the host name (a safety check), it
2310 output the message "<ip address> does not match any IP for NULL", which was
2311 confusing, to say the least. The bug was that the host name should have
2312 appeared instead of "NULL".
2314 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
2315 user that is built into the binary, and the -C or -D options is used, root
2316 privilege is dropped before the configuration file is read. In addition,
2317 logging is switched to stderr instead of the normal log files. If the
2318 configuration then re-defines the Exim user, the unprivileged environment
2319 is probably not what is expected, so Exim logs a panic warning message (but
2322 However, if deliver_drop_privilege is set, the unprivileged state may well
2323 be exactly what is intended, so the warning has been cut out in that case,
2324 and Exim is allowed to try to write to its normal log files.
2330 1. smtp_return_error_details was not giving details for temporary sender
2331 or receiver verification errors.
2333 2. Diagnose a configuration error if two authenticators have the same public
2336 3. Exim used not to create the message log file for a message until the first
2337 delivery attempt. This could be confusing when incoming messages were held
2338 for policy or load reasons. The message log file is now created at the time
2339 the message is received, and an initial "Received" line is written to it.
2341 4. The automatically generated man page for command line options had a minor
2342 bug that caused no ill effects; however, a more serious problem was that
2343 the procedure for building the man page automatically didn't always
2344 operate. Consequently, release 4.20 contains an out-of-date version. This
2345 shouldn't happen again.
2347 5. When building Exim with embedded Perl support, the script that builds the
2348 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2349 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2351 6. The freeze_tell option was not being used for messages that were frozen on
2352 arrival, either by an ACL or by local_scan().
2354 7. Added the smtp_incomplete_transaction log selector.
2356 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2357 was accepting AUTH without a new EHLO.
2359 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2360 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2363 10. Logging of TCP/IP connections (when configured) now happens in the main
2364 daemon process instead of the child process, so that the TCP/IP connection
2365 count is more accurate (but it can never be perfect).
2367 11. The use of "drop" in a nested ACL was not being handled correctly in the
2368 outer ACL. Now, if condition failure induced by the nested "drop" causes
2369 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2370 or "require"), the connection is dropped.
2372 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2373 that yield "discard" can now be used with an "accept" or a "discard" verb,
2374 but an error is generated for any others (because I can't see a useful way
2375 to define what should happen).
2377 13. When an ACL is read dynamically from a file (or anywhere else), the lines
2378 are now processed in the same way as lines in the Exim configuration file.
2379 In particular, continuation lines are supported.
2381 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
2383 15. Added -ti meaning -t -i.
2385 16. Check for letters, digits, hyphens, and dots in the names of dnslist
2386 domains, and warn by logging if others are found.
2388 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
2389 returned from GIFCONF when Exim is trying to find the list of interfaces on
2390 a host. The code in os.c has been modified to copy each ifreq to an aligned
2391 structure in all cases.
2393 Also, in some cases, the returned ifreq's were being copied to a 'struct
2394 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2395 means the last couple of bytes of an IPv6 address could be chopped if the
2396 ifreq contained only a normal sockaddr (14 bytes storage).
2398 18. Named domain lists were not supported in the hosts_treat_as_local option.
2399 An entry such as +xxxx was not recognized, and was treated as a literal
2402 19. Ensure that header lines added by a DATA ACL are included in the reject log
2403 if the ACL subsequently rejects the message.
2405 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
2406 MD5 (which is deprecated).
2408 21. When testing a filter file using -bf, Exim was writing a message when it
2409 took the sender from a "From " line in the message, but it was not doing so
2410 when it took $return_path from a Return-Path: header line. It now does.
2412 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2413 with a valid header line field name (a series of printing characters
2414 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
2416 23. Changed "disc" in the source to "disk" to conform to the documentation and
2417 the book and for uniformity.
2419 24. Ignore Sendmail's -Ooption=value command line item.
2421 25. When execve() failed while trying to run a command in a pipe transport,
2422 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2423 could be confused with a return value of 69 from the command itself. This
2424 has been changed to 127, the value the shell returns if it is asked to run
2425 a non-existent command. The wording for the related log line suggests a
2426 non-existent command as the problem.
2428 26. If received_header_text expands to an empty string, do not add a Received:
2429 header line to the message. (Well, it adds a token one on the spool, but
2430 marks it "old" so that it doesn't get used or transmitted.)
2432 27. Installed eximstats 1.28 (addition of -nt option).
2434 28. There was no check for failure on the call to getsockname() in the daemon
2435 code. This can fail if there is a shortage of resources on the system, with
2436 ENOMEM, for example. A temporary error is now given on failure.
2438 29. Contrary to the C standard, it seems that in some environments, the
2439 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2440 program. Exim now does this explicitly; it affects the formatting of
2441 timestamps using strftime().
2443 30. If exiqsumm was given junk data, it threw up some uninitialized variable
2444 complaints. I've now initialized all the variables, to avoid this.
2446 32. Header lines added by a system filter were not being "seen" during
2447 transport-time rewrites.
2449 33. The info_callback() function passed to OpenSSL is set up with type void
2450 (*)(SSL *, int, int), as described somewhere. However, when calling the
2451 function (actually a macro) that sets it up, the type void(*)() is
2452 expected. I've put in a cast to prevent warnings from picky compilers.
2454 34. If a DNS black list lookup found a CNAME record, but there were no A
2455 records associated with the domain it pointed at, Exim crashed.
2457 35. If a DNS black list lookup returned more than one A record, Exim ignored
2458 all but the first. It now scans all returned addresses if a particular IP
2459 value is being sought. In this situation, the contents of the
2460 $dnslist_value variable are a list of all the addresses, separated by a
2463 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
2464 to accept a host name and all its aliases if the forward lookup for any of
2465 them yielded the IP address of the incoming connection. Now it accepts only
2466 those names whose forward lookup yields the correct IP address. Any other
2467 names are discarded. This closes a loophole whereby a rogue DNS
2468 administrator could create reverse DNS records to break through a
2469 wildcarded host restriction in an ACL.
2471 37. If a user filter or a system filter that ran in a subprocess used any of
2472 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2473 the wrong values were passed to the pipe command ($thisaddress had the
2474 value of $0, $0 had the value of $1, etc). This bug was introduced by
2475 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
2477 38. Improved the line breaking for long SMTP error messages from ACLs.
2478 Previously, if there was no break point between 40 and 75 characters, Exim
2479 left the rest of the message alone. Two changes have been made: (a) I've
2480 reduced the minimum length to 35 characters; (b) if it can't find a break
2481 point between 35 and 75 characters, it looks ahead and uses the first one
2482 that it finds. This may give the occasional overlong line, but at least the
2483 remaining text gets split now.
2485 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2486 file descriptors might be low, and that setting 1000 would always raise it.
2487 It turns out that in some environments, the limit is already over 1000 and
2488 that lowering it causes trouble. So now Exim takes care not to decrease it.
2490 40. When delivering a message, the value of $return_path is set to $sender_
2491 address at the start of routing (routers may change the value). By an
2492 oversight, this default was not being set up when an address was tested by
2493 -bt or -bv, which affected the outcome if any router or filter referred to
2496 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
2497 log only when "message" or "log_message" are set. However, if one of the
2498 conditions was an address verification, or a call to a nested ACL, the
2499 messages generated by the underlying test were being passed through. This
2500 no longer happens. The underlying message is available in $acl_verify_
2501 message for both "message" and "log_message" expansions, so it can be
2502 passed through if needed.
2504 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2505 new expansion $bh_ to give the encoded byte string without charset
2506 translation. Translation happens only if iconv() is available; HAVE_ICONV
2507 indicates this at build time. HEADERS_CHARSET gives the charset to
2508 translate to; headers_charset can change it in the configuration, and
2509 "headers charset" can change it in an individual filter file.
2511 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
2512 that creates RFC 2047 encoded "words" labels them as that charset instead
2513 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2514 expansion operator; (ii) when Exim creates a From: line for a local
2515 message; (iii) when a header line is rewritten to include a "phrase" part.
2517 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2518 buggy, causing it to skip the first lines of messages whose message ID
2519 ended in 'D'. This would not have bitten before Exim release 4.14, because
2520 message IDs were unlikely to end in 'D' before then. The effect was to have
2521 incorrect size information for certain domains.
2523 45. #include "config.h" was missing at the start of the crypt16.c module. This
2524 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2527 46. If there was a timeout during a "random" callout check, Exim treated it as
2528 a failure of the random address, and carried on sending RSET and the real
2529 address. If the delay was just some slowness somewhere, the response to the
2530 original RCPT would be taken as a response to RSET and so on, causing
2531 mayhem of various kinds.
2533 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2534 when I implemented it. It didn't allow for the fact that some option values
2535 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2536 the right test for positive values.
2538 48. Domain names in DNS records are case-independent. Exim always looks them up
2539 in lower case. Some resolvers return domain names in exactly the case they
2540 appear in the zone file, that is, they may contain uppercase letters. Not
2541 all resolvers do this - some return always lower case. Exim was treating a
2542 change of case by a resolver as a change of domain, similar to a widening
2543 of a domain abbreviation. This triggered its re-routing code and so it was
2544 trying to route what was effectively the same domain again. This normally
2545 caused routing to fail (because the router wouldn't handle the domain
2546 twice). Now Exim checks for this case specially, and just changes the
2547 casing of the domain that it ultimately uses when it transmits the message
2550 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2553 50. If a filter generated a file delivery with a non-absolute name (possible if
2554 no home directory exists for the router), the forbid_file option was not
2557 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
2558 the existing equality matching.
2560 52. Exim was using ints instead of ino_t variables in some places where it was
2561 dealing with inode numbers.
2563 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2564 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2565 called TMPDIR, and if it finds it is different, it changes its value.
2567 54. The smtp_printf() function is now made available to local_scan() so
2568 additional output lines can be written before returning. There is also an
2569 smtp_fflush() function to enable the detection of a dropped connection.
2570 The variables smtp_input and smtp_batched_input are exported to
2573 55. Changed the default runtime configuration: the message "Unknown user"
2574 has been removed from the ACL, and instead placed on the localuser router,
2575 using the cannot_route_message feature. This means that any verification
2576 failures that generate their own messages won't get overridden. Similarly,
2577 the "Unrouteable address" message that was in the ACL for unverifiable
2578 relay addresses has also been removed.
2580 56. Added hosts_avoid_esmtp to the smtp transport.
2582 57. The exicyclog script was not checking for the esoteric option
2583 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2584 will work only if exicyclog is run under the appropriate euid.
2586 58. Following a discussion on the list, the rules by which Exim recognises line
2587 endings on incoming messages have been changed. The -dropcr and drop_cr
2588 options are now no-ops, retained only for backwards compatibility. The
2589 following line terminators are recognized: LF CRLF CR. However, special
2590 processing applies to CR:
2592 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2593 nor a local message in the state where . is a terminator.
2595 (ii) If a bare CR is encountered in a header line, an extra space is added
2596 after the line terminator so as not to end the header. The reasoning
2597 behind this is that bare CRs in header lines are most likely either
2598 to be mistakes, or people trying to play silly games.
2600 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
2601 was being incorrectly given as 18 bytes larger than it should have been.
2602 This is a VOB (very old bug).
2604 60. This may never have affected anything current, but just in case it has:
2605 When the local host is found other than at the start of a list of hosts,
2606 the local host, those with the same MX, and any that follow, are discarded.
2607 When the list in question was part of a longer list of hosts, the following
2608 hosts (not currently being processed) were also being discarded. This no
2609 longer happens. I'm not sure if this situation could ever has previously
2612 61. Added the "/MX" feature to lists of hosts in the manualroute and query
2615 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2616 header. This is something that is recommended in a new Internet Draft, and
2617 is something that is documented as being done by Sendmail. There are two
2618 possible values. For messages generated by the autoreply transport, Exim
2621 Auto-Submitted: auto-replied
2623 whereas for all other generated messages (e.g. bounces) it adds
2625 Auto-Submitted: auto-generated
2627 63. The "personal" condition in filters now includes a test for the
2628 Auto-Submitted: header. If it contains the string "auto-" the message it
2629 not considered personal.
2631 64. Added rcpt_include_affixes as a generic transport option.
2633 65. Added queue_only_override (default true).
2635 66. Added the syslog_duplication option.
2637 67. If what should have been the first header line of a message consisted of
2638 a space followed by a colon, Exim was mis-interpreting it as a header line.
2639 It isn't of course - it is syntactically invalid and should therefore be
2640 treated as the start of the message body. The misbehaviour could have
2641 caused a number of strange effects, including loss of data in subsequent
2642 header lines, and spool format errors.
2644 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2645 client host had authenticated. This control can now be exercised by an ACL
2646 for more flexibility.
2648 69. By default, callouts do not happen when testing with -bh. There is now a
2649 variant, -bhc, which does actually run the callout code, including
2650 consulting and updating the callout cache.
2652 70. Added support for saslauthd authentication, courtesy of Alexander
2655 71. If statvfs() failed on the spool or log directories while checking their
2656 size for availability, Exim confusingly gave the error "space shortage".
2657 Furthermore, in debugging mode it crashed with a floating point exception.
2658 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2659 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2660 serious problem, Exim now writes to the main and panic logs when this
2661 happens, with details of the failure. It then refuses to accept the
2662 incoming message, giving the message "spool directory problem" or "log
2663 directory problem" with a 421 code for SMTP messages.
2665 72. When Exim is about to re-exec itself, it ensures that the file descriptors
2666 0, 1, and 2 exist, because some OS complain for execs without them (see
2667 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2668 descriptors. However, the code omitted to check that the open succeeded,
2669 causing mysterious errors if for some reason the permissions on /dev/null
2670 got screwed. Now Exim writes a message to the main and panic logs, and
2671 bombs out if it can't open /dev/null.
2673 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2674 interact so that it is all more flexible. It is supposed to remain
2675 backwards compatible. Also added extra_local_interfaces.
2677 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2678 to bomb out with an assertion failure - to the client this appears as a
2679 connection drop. This problem occurs in the part of the code that was taken
2680 from the Samba project. Fortunately, the assertion is in a very simple
2681 function, so I have fixed this by reproducing the function inline in the
2682 one place where it is called, and arranging for authentication to fail
2683 instead of killing the process with assert().
2685 75. The SPA client code was not working when the server requested OEM rather
2686 than Unicode encoding.
2688 76. Added code to make require_files with a specific uid setting more usable in
2689 the case where statting the file as root fails - usually a non-root-mounted
2690 NFS file system. When this happens and the failure is EACCES, Exim now
2691 forks a subprocess and does the per-uid checking as the relevant uid.
2693 77. Added process_log_path.
2695 78. If log_file_path was not explicitly set, a setting of check_log_space or
2696 check_log_inodes was ignored.
2698 79. If a space check for the spool or log partitions fails, the incident is now
2699 logged. Of course, in the latter case the data may get lost...
2701 80. Added the %p formatting code to string_format() so that it can be used to
2702 print addresses in debug_print(). Adjusted all the address printing in the
2703 debugging in store.c to use %p rather than %d.
2705 81. There was a concern that a line of code in smtp_in.c could overflow a
2706 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2707 initially expressed, the concern was not well-founded, because trailing
2708 spaces are removed early. However, if the trailing spaces were followed by
2709 a NULL, they did not get removed, so the overflow was possible. Two fixes
2712 (a) I re-wrote the offending code in a cleaner fashion.
2713 (b) If an incoming SMTP command contains a NULL character, it is rejected
2716 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
2717 runs initgroups(), so that if the Exim user is in any additional groups,
2718 they will be used during message reception.
2724 The change log for 4.20 and earlier releases has been archived.