src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatentates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7 #
   8 # Copyright (c) The Exim Maintainers 2016
   9
  10 SHELL      = $(MAKE_SHELL)
  11 SCRIPTS    = ../scripts
  12 O          = ../OS
  13 EDITME     = ../Local/Makefile
  14 EXIMON_EDITME = ../Local/eximon.conf
  15
  16 # The compiler used for linking is normally the same as the compiler used for
  17 # compiling. However, by giving it a different name, we can override it from
  18 # the command line, and this is helpful for certain types of testing.
  19
  20 LNCC = $(CC)
  21
  22 # The compile commands can be very long. To make the output look better,
  23 # they are not normally echoed in full. To get full echoing, the caller
  24 # must set FULLECHO='' on the command line and call make with -e. We default
  25 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  26
  27 FULLECHO = @
  28 FE       = $(FULLECHO)
  29
  30 # The default target double-checks the existence of $(EDITME) and then arranges
  31 # to touch it if it exists and any of the optional configuration files, which
  32 # depend on the os or the architecture, have been altered. The same sub-target
  33 # does the same thing for the eximon configuration file if it exists. Then
  34 # there is a check that the Makefile (the one built from this file) is
  35 # up-to-date. Then the os-specific source files and the C configuration file
  36 # are set up, and finally it goes to the main Exim target.
  37
  38 all:       utils exim
  39 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h
  40
  41 checklocalmake:
  42         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  43           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  44           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  45         then \
  46           touch $(EDITME); \
  47         fi
  48         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  49           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  50           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  51         then \
  52           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  53         fi
  54
  55 $(EDITME):
  56         @echo " "
  57         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  58         @echo "*** appropriate changes for your site."
  59         @echo " "
  60         @false
  61
  62 $(EXIMON_EDITME):
  63         @echo " "
  64         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  65         @echo "*** appropriate changes for your site."
  66         @echo " "
  67         @test ! -d ../Local && mkdir ../Local
  68         @false
  69
  70 # Check that the local Makefile is up-to-date
  71
  72 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  73           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  74         @echo " "
  75         @echo "*** Makefile needs rebuilding"
  76         @echo "*** Please run \"make makefile\" at top level"
  77         @echo " "
  78         @false
  79
  80 # Build (link) the os.h file
  81
  82 os.h:   $(SCRIPTS)/Configure-os.h \
  83         $(O)/os.h-AIX           $(O)/os.h-BSDI  $(O)/os.h-cygwin \
  84         $(O)/os.h-Darwin        $(O)/os.h-DGUX  $(O)/os.h-DragonFly \
  85         $(O)/os.h-FreeBSD       $(O)/os.h-GNU   $(O)/os.h-GNUkFreeBSD \
  86         $(O)/os.h-GNUkNetBSD    $(O)/os.h-HI-OSF \
  87         $(O)/os.h-HI-UX         $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
  88         $(O)/os.h-IRIX          $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
  89         $(O)/os.h-IRIX65        $(O)/os.h-Linux $(O)/os.h-mips \
  90         $(O)/os.h-NetBSD        $(O)/os.h-NetBSD-a.out \
  91         $(O)/os.h-OpenBSD       $(O)/os.h-OpenUNIX      $(O)/os.h-OSF1 \
  92         $(O)/os.h-QNX           $(O)/os.h-SCO           $(O)/os.h-SCO_SV \
  93         $(O)/os.h-SunOS4        $(O)/os.h-SunOS5        $(O)/os.h-SunOS5-hal \
  94         $(O)/os.h-ULTRIX        $(O)/os.h-UNIX_SV \
  95         $(O)/os.h-Unixware7     $(O)/os.h-USG
  96         $(SHELL) $(SCRIPTS)/Configure-os.h
  97
  98 # Build the os.c file
  99
 100 os.c:   ../src/os.c \
 101         $(SCRIPTS)/Configure-os.c \
 102         $(O)/os.c-cygwin        $(O)/os.c-GNU   $(O)/os.c-HI-OSF \
 103         $(O)/os.c-IRIX          $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
 104         $(O)/os.c-IRIX65        $(O)/os.c-Linux $(O)/os.c-OSF1
 105         $(SHELL) $(SCRIPTS)/Configure-os.c
 106
 107 # Build the config.h file.
 108
 109 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 110         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 111
 112
 113 # This target is recognized specially by GNU make. It records those targets
 114 # that do not correspond to files that are being built and which should
 115 # therefore always be run, even if the files exist. This shouldn't in fact be a
 116 # problem, but it does no harm. Other make programs will just ignore this.
 117
 118 .PHONY: all config utils \
 119         buildauths buildlookups buildpdkim buildrouters \
 120         buildtransports checklocalmake clean
 121
 122
 123 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 124         exigrep eximstats exipick exiqgrep exiqsumm \
 125         transport-filter.pl convert4r3 convert4r4 \
 126         exim_checkaccess \
 127         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 128
 129
 130 # Targets for special-purpose configuration header builders
 131 buildconfig: buildconfig.c
 132         @echo "$(CC) buildconfig.c"
 133         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 134
 135
 136 # Target for the exicyclog utility script
 137 exicyclog: config ../src/exicyclog.src
 138         @rm -f exicyclog
 139         @sed \
 140           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 141           -e "/^# /p" \
 142           -e "/^# /d" \
 143           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 144           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 145           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 146           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 147           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 148           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 149           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 150           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 151           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 152           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 153           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 154           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 155           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 156           ../src/exicyclog.src > exicyclog-t
 157         @mv exicyclog-t exicyclog
 158         @chmod a+x exicyclog
 159         @echo ">>> exicyclog script built"
 160
 161 # Target for the exinext utility script
 162 exinext: config ../src/exinext.src
 163         @rm -f exinext
 164         @sed \
 165           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 166           -e "/^# /p" \
 167           -e "/^# /d" \
 168           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 169           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 170           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 171           ../src/exinext.src > exinext-t
 172         @mv exinext-t exinext
 173         @chmod a+x exinext
 174         @echo ">>> exinext script built"
 175
 176 # Target for the exiwhat utility script
 177 exiwhat: config ../src/exiwhat.src
 178         @rm -f exiwhat
 179         @sed \
 180           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 181           -e "/^# /p" \
 182           -e "/^# /d" \
 183           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 184           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 185           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 186           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 187           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 188           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 189           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 190           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 191           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 192           ../src/exiwhat.src > exiwhat-t
 193         @mv exiwhat-t exiwhat
 194         @chmod a+x exiwhat
 195         @echo ">>> exiwhat script built"
 196
 197 # Target for the exim_checkaccess utility script
 198 exim_checkaccess: config ../src/exim_checkaccess.src
 199         @rm -f exim_checkaccess
 200         @sed \
 201           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 202           -e "/^# /p" \
 203           -e "/^# /d" \
 204           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 205           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 206           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 207           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 208           ../src/exim_checkaccess.src > exim_checkaccess-t
 209         @mv exim_checkaccess-t exim_checkaccess
 210         @chmod a+x exim_checkaccess
 211         @echo ">>> exim_checkaccess script built"; echo ""
 212
 213 # Target for the Exim monitor start-up script
 214 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 215           ../Local/eximon.conf
 216         @rm -f eximon
 217         $(SHELL) $(SCRIPTS)/Configure-eximon
 218         @sed \
 219           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 220           -e "/^# /p" \
 221           -e "/^# /d" \
 222           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 223           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 224           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 225           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 226           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 227           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 228           ../src/eximon.src >> eximon
 229         @echo ">>> eximon script built"; echo ""
 230
 231 # Targets for utilities; these are all Perl scripts that have to get the
 232 # location of Perl put in them. A few need other things as well.
 233
 234 exigrep: Makefile ../src/exigrep.src
 235         @rm -f exigrep
 236         @sed \
 237           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 238           -e "/^# /p" \
 239           -e "/^# /d" \
 240           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 241           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 242           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 243           ../src/exigrep.src > exigrep-t
 244         @mv exigrep-t exigrep
 245         @chmod a+x exigrep
 246         @echo ">>> exigrep script built"
 247
 248 eximstats: Makefile ../src/eximstats.src
 249         @rm -f eximstats
 250         @sed \
 251           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 252           ../src/eximstats.src > eximstats-t
 253         @mv eximstats-t eximstats
 254         @chmod a+x eximstats
 255         @echo ">>> eximstats script built"
 256
 257 exiqgrep: Makefile ../src/exiqgrep.src
 258         @rm -f exiqgrep
 259         @sed \
 260           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 261           -e "/^# /p" \
 262           -e "/^# /d" \
 263           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 264           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 265           ../src/exiqgrep.src > exiqgrep-t
 266         @mv exiqgrep-t exiqgrep
 267         @chmod a+x exiqgrep
 268         @echo ">>> exiqgrep script built"
 269
 270 exiqsumm: Makefile ../src/exiqsumm.src
 271         @rm -f exiqsumm
 272         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 273           ../src/exiqsumm.src > exiqsumm-t
 274         @mv exiqsumm-t exiqsumm
 275         @chmod a+x exiqsumm
 276         @echo ">>> exiqsumm script built"
 277
 278 exipick: Makefile ../src/exipick.src
 279         @rm -f exipick
 280         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 281           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 282           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 283           ../src/exipick.src > exipick-t
 284         @mv exipick-t exipick
 285         @chmod a+x exipick
 286         @echo ">>> exipick script built"
 287
 288 transport-filter.pl: Makefile ../src/transport-filter.src
 289         @rm -f transport-filter.pl
 290         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 291           ../src/transport-filter.src > transport-filter.pl-t
 292         @mv transport-filter.pl-t transport-filter.pl
 293         @chmod a+x transport-filter.pl
 294         @echo ">>> transport-filter.pl script built"
 295
 296 convert4r3: Makefile ../src/convert4r3.src
 297         @rm -f convert4r3
 298         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 299           ../src/convert4r3.src > convert4r3-t
 300         @mv convert4r3-t convert4r3
 301         @chmod a+x convert4r3
 302         @echo ">>> convert4r3 script built"
 303
 304 convert4r4: Makefile ../src/convert4r4.src
 305         @rm -f convert4r4
 306         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 307           ../src/convert4r4.src > convert4r4-t
 308         @mv convert4r4-t convert4r4
 309         @chmod a+x convert4r4
 310         @echo ">>> convert4r4 script built"
 311
 312
 313 # These are objects of optional features. They are always compiled, but
 314 # if the corresponding #defines are not set, they wind up empty and
 315 # are thrown away by the linker.
 316
 317 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 318 OBJ_EXPERIMENTAL = bmi_spam.o \
 319                                 dane.o \
 320                                 dcc.o \
 321                                 dmarc.o \
 322                                 imap_utf7.o \
 323                                 spf.o \
 324                                 srs.o \
 325                                 utf8.o
 326
 327 # Targets for final binaries; the main one has a build number which is
 328 # updated each time. We don't bother with that for the auxiliaries.
 329
 330 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 331
 332 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 333         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 334         filtertest.o globals.o dkim.o \
 335         header.o host.o ip.o log.o lss.o match.o moan.o \
 336         os.o parse.o queue.o \
 337         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 338         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 339         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 340         environment.o \
 341         $(OBJ_LOOKUPS) \
 342         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 343         $(OBJ_EXPERIMENTAL)
 344
 345 exim:   buildlookups buildauths pdkim/pdkim.a \
 346         buildrouters buildtransports \
 347         $(OBJ_EXIM) version.o
 348         @echo "$(LNCC) -o exim"
 349         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 350           routers/routers.a transports/transports.a lookups/lookups.a \
 351           auths/auths.a pdkim/pdkim.a \
 352           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 353           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 354           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 355         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 356           echo $(STRIP_COMMAND) exim; \
 357           $(STRIP_COMMAND) exim; \
 358         fi
 359         $(EXIM_CHMOD)
 360         @echo " "
 361         @echo ">>> exim binary built"
 362         @echo " "
 363
 364 # The utility for dumping the contents of an exim database
 365
 366 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 367
 368 exim_dumpdb: $(OBJ_DUMPDB)
 369         @echo "$(LNCC) -o exim_dumpdb"
 370         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 371           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 372         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 373           echo $(STRIP_COMMAND) exim_dumpdb; \
 374           $(STRIP_COMMAND) exim_dumpdb; \
 375         fi
 376         @echo ">>> exim_dumpdb utility built"
 377         @echo " "
 378
 379 # The utility for interrogating/fixing the contents of an exim database
 380
 381 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 382
 383 exim_fixdb:  $(OBJ_FIXDB) buildauths
 384         @echo "$(LNCC) -o exim_fixdb"
 385         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 386           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
 387         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 388           echo $(STRIP_COMMAND) exim_fixdb; \
 389           $(STRIP_COMMAND) exim_fixdb; \
 390         fi
 391         @echo ">>> exim_fixdb utility built"
 392         @echo " "
 393
 394 # The utility for tidying the contents of an exim database
 395
 396 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 397
 398 exim_tidydb: $(OBJ_TIDYDB)
 399         @echo "$(LNCC) -o exim_tidydb"
 400         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 401           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 402         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 403           echo $(STRIP_COMMAND) exim_tidydb; \
 404           $(STRIP_COMMAND) exim_tidydb; \
 405         fi
 406         @echo ">>> exim_tidydb utility built"
 407         @echo " "
 408
 409 # The utility for building dbm files
 410
 411 exim_dbmbuild: exim_dbmbuild.o
 412         @echo "$(LNCC) -o exim_dbmbuild"
 413         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 414           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 415         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 416           echo $(STRIP_COMMAND) exim_dbmbuild; \
 417           $(STRIP_COMMAND) exim_dbmbuild; \
 418         fi
 419         @echo ">>> exim_dbmbuild utility built"
 420         @echo " "
 421
 422 # The utility for locking a mailbox while messing around with it
 423
 424 exim_lock: exim_lock.c os.h
 425         @echo "$(CC) exim_lock.c"
 426         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 427         @echo "$(LNCC) -o exim_lock"
 428         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 429           $(LIBS) $(EXTRALIBS)
 430         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 431           echo $(STRIP_COMMAND) exim_lock; \
 432           $(STRIP_COMMAND) exim_lock; \
 433         fi
 434         @echo ">>> exim_lock utility built"
 435         @echo " "
 436
 437 # The X-based Exim monitor program's binary part. There's a macro for cutting
 438 # out the modified TextPop module, because some antique link editors cannot
 439 # handle the fact that it is redefining things that are found later in the
 440 # Xaw library.
 441
 442 # Object modules that are the unique Eximon modules
 443
 444 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 445         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 446         em_text.o em_xs.o
 447
 448 # The complete modules list also includes some specially compiled versions of
 449 # code from the main Exim source tree.
 450
 451 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
 452
 453 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 454             ../exim_monitor/em_version.c
 455         @echo "$(CC) exim_monitor/em_version.c"
 456         $(FE)$(CC) -o em_version.o -c \
 457           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 458         @echo "$(LNCC) -o eximon.bin"
 459         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 460           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 461           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 462         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 463           echo $(STRIP_COMMAND) eximon.bin; \
 464           $(STRIP_COMMAND) eximon.bin; \
 465         fi
 466         @echo ">>> exim monitor binary built"
 467         @echo " "
 468
 469
 470 # Compile step for most of the exim modules. HDRS is a list of headers
 471 # which cause everthing to be rebuilt. PHDRS is the same, for the use
 472 # of routers, transports, and authenticators. I can't find a way of doing this
 473 # in one. This list is overkill, but it doesn't really take much time to
 474 # rebuild Exim on a modern computer.
 475
 476 HDRS  = config.h \
 477         dbfunctions.h \
 478         dbstuff.h \
 479         exim.h \
 480         functions.h \
 481         globals.h \
 482         local_scan.h \
 483         macros.h \
 484         mytypes.h \
 485         structs.h \
 486         os.h
 487 PHDRS = ../config.h \
 488         ../dbfunctions.h \
 489         ../dbstuff.h \
 490         ../exim.h \
 491         ../functions.h \
 492         ../globals.h \
 493         ../local_scan.h \
 494         ../macros.h \
 495         ../mytypes.h \
 496         ../structs.h \
 497         ../os.h
 498
 499 .SUFFIXES: .o .c
 500 .c.o:;  @echo "$(CC) $*.c"
 501         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 502
 503 # Update Exim's version information and build the version object.
 504
 505 version.h::
 506         @../scripts/reversion
 507
 508 cnumber.h: version.h
 509
 510 version.o: $(HDRS) cnumber.h version.h version.c
 511
 512 # This is the dummy module for use by test compiles of individual modules. It
 513 # contains functions such as log_write() that may be called from bits of Exim
 514 # in the tested code.
 515
 516 dummies.o:       dummies.c
 517
 518 # Compile instructions for perl.o for when EXIM_PERL is set
 519
 520 perl.o:          $(HDRS) perl.c
 521         @echo "$(PERL_CC) perl.c"
 522         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 523
 524 # Compile instructions for the database utility modules
 525
 526 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 527         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 528         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 529                                       -DCOMPILE_UTILITY \
 530                                       -DEXIM_DUMPDB \
 531                                       -o exim_dumpdb.o exim_dbutil.c
 532
 533 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 534         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 535         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 536                                       -DCOMPILE_UTILITY \
 537                                       -DEXIM_FIXDB \
 538                                       -o exim_fixdb.o exim_dbutil.c
 539
 540 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 541         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 542         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 543                                       -DCOMPILE_UTILITY \
 544                                       -DEXIM_TIDYDB \
 545                                       -o exim_tidydb.o exim_dbutil.c
 546
 547 # Compile instructions for exim_dbmbuild
 548
 549 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 550         @echo "$(CC) exim_dbmbuild.c"
 551         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
 552
 553 # Utilities use special versions of some modules - typically with debugging
 554 # calls cut out.
 555
 556 util-spool_in.o: $(HDRS) spool_in.c
 557         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 558         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 559
 560 util-store.o:    $(HDRS) store.c
 561         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 562         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 563
 564 util-string.o:   $(HDRS) string.c
 565         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 566         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 567
 568 util-os.o:       $(HDRS) os.c
 569         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 570         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 571                                       -DCOMPILE_UTILITY \
 572                                       -DOS_LOAD_AVERAGE \
 573                                       -DFIND_RUNNING_INTERFACES \
 574                                       -o util-os.o os.c
 575
 576 # The local scan module depends only on its own special header, and is compiled
 577 # from a source whose location is set by configuration.
 578
 579 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 580         @echo "$(CC) local_scan.c"
 581         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 582
 583 # Dependencies for the "ordinary" exim modules
 584
 585 acl.o:           $(HDRS) acl.c
 586 base64.o:        $(HDRS) mime.h base64.c
 587 child.o:         $(HDRS) child.c
 588 crypt16.o:       $(HDRS) crypt16.c
 589 daemon.o:        $(HDRS) daemon.c
 590 dbfn.o:          $(HDRS) dbfn.c
 591 debug.o:         $(HDRS) debug.c
 592 deliver.o:       $(HDRS) deliver.c
 593 directory.o:     $(HDRS) directory.c
 594 dns.o:           $(HDRS) dns.c
 595 enq.o:           $(HDRS) enq.c
 596 exim.o:          $(HDRS) exim.c
 597 expand.o:        $(HDRS) expand.c
 598 environment.o:   $(HDRS) environment.c
 599 filter.o:        $(HDRS) filter.c
 600 filtertest.o:    $(HDRS) filtertest.c
 601 globals.o:       $(HDRS) globals.c
 602 header.o:        $(HDRS) header.c
 603 host.o:          $(HDRS) host.c
 604 ip.o:            $(HDRS) ip.c
 605 log.o:           $(HDRS) log.c
 606 lss.o:           $(HDRS) lss.c
 607 match.o:         $(HDRS) match.c
 608 moan.o:          $(HDRS) moan.c
 609 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
 610 parse.o:         $(HDRS) parse.c
 611 queue.o:         $(HDRS) queue.c
 612 rda.o:           $(HDRS) rda.c
 613 readconf.o:      $(HDRS) readconf.c
 614 receive.o:       $(HDRS) receive.c
 615 retry.o:         $(HDRS) retry.c
 616 rewrite.o:       $(HDRS) rewrite.c
 617 rfc2047.o:       $(HDRS) rfc2047.c
 618 route.o:         $(HDRS) route.c
 619 search.o:        $(HDRS) search.c
 620 sieve.o:         $(HDRS) sieve.c
 621 smtp_in.o:       $(HDRS) smtp_in.c
 622 smtp_out.o:      $(HDRS) smtp_out.c
 623 spool_in.o:      $(HDRS) spool_in.c
 624 spool_out.o:     $(HDRS) spool_out.c
 625 std-crypto.o:    $(HDRS) std-crypto.c
 626 store.o:         $(HDRS) store.c
 627 string.o:        $(HDRS) string.c
 628 tls.o:           $(HDRS) tls.c \
 629                  tls-gnu.c tlscert-gnu.c \
 630                  tls-openssl.c tlscert-openssl.c
 631 tod.o:           $(HDRS) tod.c
 632 transport.o:     $(HDRS) transport.c
 633 tree.o:          $(HDRS) tree.c
 634 verify.o:        $(HDRS) verify.c
 635 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 636
 637 # Dependencies for WITH_CONTENT_SCAN modules
 638
 639 malware.o:       $(HDRS) malware.c
 640 mime.o:          $(HDRS) mime.h mime.c
 641 regex.o:         $(HDRS) regex.c
 642 spam.o:          $(HDRS) spam.c
 643 spool_mbox.o:    $(HDRS) spool_mbox.c
 644
 645
 646 # Dependencies for EXPERIMENTAL_* modules
 647
 648 bmi_spam.o:     $(HDRS) bmi_spam.c
 649 dane.o:         $(HDRS) dane.c dane-gnu.c dane-openssl.c
 650 dcc.o:          $(HDRS) dcc.h dcc.c
 651 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
 652 imap_utf7.o:    $(HDRS) imap_utf7.c
 653 spf.o:          $(HDRS) spf.h spf.c
 654 srs.o:          $(HDRS) srs.h srs.c
 655 utf8.o:         $(HDRS) utf8.c
 656
 657 # The module containing tables of available lookups, routers, auths, and
 658 # transports must be rebuilt if any of them are. However, because the makefiles
 659 # for the drivers are always run, we don't actually put the dependencies here,
 660 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 661 # drtables.o even though the .a files haven't in fact been updated. Instead
 662 # it is arranged that the lower-level makefiles remove drtables.o when they
 663 # rebuild the .a files.
 664
 665 drtables.o:      $(HDRS) drtables.c
 666
 667 # We depend upon object files built as part of building the lookups library
 668 # When using parallel make, we don't have the dependency to force building
 669 # in the sub-directory unless we force that dependency:
 670
 671 $(OBJ_LOOKUPS):  buildlookups
 672
 673 # The exim monitor's private modules - the sources live in a private
 674 # subdirectory. The final binary combines the private modules with some
 675 # modules from the main exim binary.
 676
 677 em_StripChart.o: ../exim_monitor/em_StripChart.c
 678 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 679 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 680 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 681 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 682 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 683 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 684 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 685 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 686 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 687 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 688 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 689 $(MONBIN): $(HDRS)
 690                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 691                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 692                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 693
 694
 695 # Targets for the various libraries that Exim uses.
 696
 697 # The lookups library.
 698
 699 buildlookups: config
 700          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 701            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 702            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
 703            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
 704          @echo " "
 705
 706 # The routers library.
 707
 708 buildrouters: config
 709          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 710            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 711            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 712          @echo " "
 713
 714 # The transports library.
 715
 716 buildtransports: config
 717          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 718            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 719            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 720          @echo " "
 721
 722 # The library of authorization modules
 723
 724 buildauths: config
 725          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 726            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 727            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 728          @echo " "
 729
 730 # The PDKIM library
 731
 732 buildpdkim: pdkim/pdkim.a
 733 pdkim/pdkim.a: config
 734          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 735            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 736            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 737          @echo " "
 738
 739 # The "clean", "install", and "makefile" targets just pass themselves back to
 740 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 741 # for them in the build directory.
 742
 743 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 744
 745 # Targets for building stand-alone testing programs for basic testing of
 746 # some of the building blocks. These are not integrated with the makefile-
 747 # building targets. If you change something that is going to cause the
 748 # makefile to be rebuilt, you must run "make makefile" before running one
 749 # of these.
 750
 751 # The testing programs use different versions of some modules - usually
 752 # with bits cut out that are not relevant to the test in hand. For those
 753 # that are used by several tests, we use a different name.
 754
 755 sa-globals.o:    $(HDRS) globals.c
 756         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 757
 758 sa-os.o:         $(HDRS) os.c
 759         $(CC) -c $(CFLAGS) $(INCLUDE) \
 760                                       -DFIND_RUNNING_INTERFACES \
 761                                       -o sa-os.o os.c
 762
 763 # These are the test targets themselves
 764
 765 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 766                string.o tod.o version.o utf8.o
 767         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 768         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 769           dummies.o sa-globals.o sa-os.o store.o string.o \
 770           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 771         rm -f dbfn.o
 772
 773 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 774                store.o string.o tod.o tree.o
 775         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 776         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 777         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 778         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 779         $(LNCC) -o test_host $(LFLAGS) \
 780           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 781           tod.o tree.o $(LIBS) $(LIBRESOLV)
 782         rm -f child.o dummies.o host.o dns.o
 783
 784 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 785         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 786         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 787           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 788         rm -f os.o
 789
 790 test_parse:  config.h parse.c dummies.o sa-globals.o \
 791              store.o string.o tod.o version.o utf8.o
 792         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 793         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 794           dummies.o sa-globals.o store.o string.o tod.o version.o \
 795           utf8.o $(LDFLAGS)
 796         rm -f parse.o
 797
 798 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 799         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 800         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 801           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 802         rm -f string.o
 803
 804 # End