src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatentates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7
   8 SHELL      = $(MAKE_SHELL)
   9 SCRIPTS    = ../scripts
  10 O          = ../OS
  11 EDITME     = ../Local/Makefile
  12 EXIMON_EDITME = ../Local/eximon.conf
  13
  14 # The compiler used for linking is normally the same as the compiler used for
  15 # compiling. However, by giving it a different name, we can override it from
  16 # the command line, and this is helpful for certain types of testing.
  17
  18 LNCC = $(CC)
  19
  20 # The compile commands can be very long. To make the output look better,
  21 # they are not normally echoed in full. To get full echoing, the caller
  22 # must set FULLECHO='' on the command line and call make with -e. We default
  23 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  24
  25 FULLECHO = @
  26 FE       = $(FULLECHO)
  27
  28 # The default target double-checks the existence of $(EDITME) and then arranges
  29 # to touch it if it exists and any of the optional configuration files, which
  30 # depend on the os or the architecture, have been altered. The same sub-target
  31 # does the same thing for the eximon configuration file if it exists. Then
  32 # there is a check that the Makefile (the one built from this file) is
  33 # up-to-date. Then the os-specific source files and the C configuration file
  34 # are set up, and finally it goes to the main Exim target.
  35
  36 all:       utils exim
  37 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h
  38
  39 checklocalmake:
  40         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  41           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  42           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  43         then \
  44           touch $(EDITME); \
  45         fi
  46         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  47           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  48           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  49         then \
  50           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  51         fi
  52
  53 $(EDITME):
  54         @echo " "
  55         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  56         @echo "*** appropriate changes for your site."
  57         @echo " "
  58         @false
  59
  60 $(EXIMON_EDITME):
  61         @echo " "
  62         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  63         @echo "*** appropriate changes for your site."
  64         @echo " "
  65         @test ! -d ../Local && mkdir ../Local
  66         @false
  67
  68 # Check that the local Makefile is up-to-date
  69
  70 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  71           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  72         @echo " "
  73         @echo "*** Makefile needs rebuilding"
  74         @echo "*** Please run \"make makefile\" at top level"
  75         @echo " "
  76         @false
  77
  78 # Build (link) the os.h file
  79
  80 os.h:   $(SCRIPTS)/Configure-os.h \
  81         $(O)/os.h-AIX           $(O)/os.h-BSDI  $(O)/os.h-cygwin \
  82         $(O)/os.h-Darwin        $(O)/os.h-DGUX  $(O)/os.h-DragonFly \
  83         $(O)/os.h-FreeBSD       $(O)/os.h-GNU   $(O)/os.h-GNUkFreeBSD \
  84         $(O)/os.h-GNUkNetBSD    $(O)/os.h-HI-OSF \
  85         $(O)/os.h-HI-UX         $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
  86         $(O)/os.h-IRIX          $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
  87         $(O)/os.h-IRIX65        $(O)/os.h-Linux $(O)/os.h-mips \
  88         $(O)/os.h-NetBSD        $(O)/os.h-NetBSD-a.out \
  89         $(O)/os.h-OpenBSD       $(O)/os.h-OpenUNIX      $(O)/os.h-OSF1 \
  90         $(O)/os.h-QNX           $(O)/os.h-SCO           $(O)/os.h-SCO_SV \
  91         $(O)/os.h-SunOS4        $(O)/os.h-SunOS5        $(O)/os.h-SunOS5-hal \
  92         $(O)/os.h-ULTRIX        $(O)/os.h-UNIX_SV \
  93         $(O)/os.h-Unixware7     $(O)/os.h-USG
  94         $(SHELL) $(SCRIPTS)/Configure-os.h
  95
  96 # Build the os.c file
  97
  98 os.c:   ../src/os.c \
  99         $(SCRIPTS)/Configure-os.c \
 100         $(O)/os.c-cygwin        $(O)/os.c-GNU   $(O)/os.c-HI-OSF \
 101         $(O)/os.c-IRIX          $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
 102         $(O)/os.c-IRIX65        $(O)/os.c-Linux $(O)/os.c-OSF1
 103         $(SHELL) $(SCRIPTS)/Configure-os.c
 104
 105 # Build the config.h file.
 106
 107 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 108         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 109
 110
 111 # This target is recognized specially by GNU make. It records those targets
 112 # that do not correspond to files that are being built and which should
 113 # therefore always be run, even if the files exist. This shouldn't in fact be a
 114 # problem, but it does no harm. Other make programs will just ignore this.
 115
 116 .PHONY: all config utils \
 117         buildauths buildlookups buildpdkim buildrouters \
 118         buildtransports checklocalmake clean
 119
 120
 121 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 122         exigrep eximstats exipick exiqgrep exiqsumm \
 123         transport-filter.pl convert4r3 convert4r4 \
 124         exim_checkaccess \
 125         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 126
 127
 128 # Targets for special-purpose configuration header builders
 129 buildconfig: buildconfig.c
 130         @echo "$(CC) buildconfig.c"
 131         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 132
 133
 134 # Target for the exicyclog utility script
 135 exicyclog: config ../src/exicyclog.src
 136         @rm -f exicyclog
 137         @sed \
 138           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 139           -e "/^# /p" \
 140           -e "/^# /d" \
 141           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 142           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 143           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 144           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 145           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 146           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 147           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 148           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 149           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 150           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 151           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 152           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 153           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 154           ../src/exicyclog.src > exicyclog-t
 155         @mv exicyclog-t exicyclog
 156         @chmod a+x exicyclog
 157         @echo ">>> exicyclog script built"
 158
 159 # Target for the exinext utility script
 160 exinext: config ../src/exinext.src
 161         @rm -f exinext
 162         @sed \
 163           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 164           -e "/^# /p" \
 165           -e "/^# /d" \
 166           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 167           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 168           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 169           ../src/exinext.src > exinext-t
 170         @mv exinext-t exinext
 171         @chmod a+x exinext
 172         @echo ">>> exinext script built"
 173
 174 # Target for the exiwhat utility script
 175 exiwhat: config ../src/exiwhat.src
 176         @rm -f exiwhat
 177         @sed \
 178           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 179           -e "/^# /p" \
 180           -e "/^# /d" \
 181           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 182           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 183           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 184           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 185           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 186           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 187           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 188           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 189           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 190           ../src/exiwhat.src > exiwhat-t
 191         @mv exiwhat-t exiwhat
 192         @chmod a+x exiwhat
 193         @echo ">>> exiwhat script built"
 194
 195 # Target for the exim_checkaccess utility script
 196 exim_checkaccess: config ../src/exim_checkaccess.src
 197         @rm -f exim_checkaccess
 198         @sed \
 199           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 200           -e "/^# /p" \
 201           -e "/^# /d" \
 202           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 203           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 204           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 205           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 206           ../src/exim_checkaccess.src > exim_checkaccess-t
 207         @mv exim_checkaccess-t exim_checkaccess
 208         @chmod a+x exim_checkaccess
 209         @echo ">>> exim_checkaccess script built"; echo ""
 210
 211 # Target for the Exim monitor start-up script
 212 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 213           ../Local/eximon.conf
 214         @rm -f eximon
 215         $(SHELL) $(SCRIPTS)/Configure-eximon
 216         @sed \
 217           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 218           -e "/^# /p" \
 219           -e "/^# /d" \
 220           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 221           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 222           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 223           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 224           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 225           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 226           ../src/eximon.src >> eximon
 227         @echo ">>> eximon script built"; echo ""
 228
 229 # Targets for utilities; these are all Perl scripts that have to get the
 230 # location of Perl put in them. A few need other things as well.
 231
 232 exigrep: Makefile ../src/exigrep.src
 233         @rm -f exigrep
 234         @sed \
 235           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 236           -e "/^# /p" \
 237           -e "/^# /d" \
 238           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 239           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 240           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 241           ../src/exigrep.src > exigrep-t
 242         @mv exigrep-t exigrep
 243         @chmod a+x exigrep
 244         @echo ">>> exigrep script built"
 245
 246 eximstats: Makefile ../src/eximstats.src
 247         @rm -f eximstats
 248         @sed \
 249           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 250           ../src/eximstats.src > eximstats-t
 251         @mv eximstats-t eximstats
 252         @chmod a+x eximstats
 253         @echo ">>> eximstats script built"
 254
 255 exiqgrep: Makefile ../src/exiqgrep.src
 256         @rm -f exiqgrep
 257         @sed \
 258           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 259           -e "/^# /p" \
 260           -e "/^# /d" \
 261           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 262           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 263           ../src/exiqgrep.src > exiqgrep-t
 264         @mv exiqgrep-t exiqgrep
 265         @chmod a+x exiqgrep
 266         @echo ">>> exiqgrep script built"
 267
 268 exiqsumm: Makefile ../src/exiqsumm.src
 269         @rm -f exiqsumm
 270         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 271           ../src/exiqsumm.src > exiqsumm-t
 272         @mv exiqsumm-t exiqsumm
 273         @chmod a+x exiqsumm
 274         @echo ">>> exiqsumm script built"
 275
 276 exipick: Makefile ../src/exipick.src
 277         @rm -f exipick
 278         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 279           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 280           ../src/exipick.src > exipick-t
 281         @mv exipick-t exipick
 282         @chmod a+x exipick
 283         @echo ">>> exipick script built"
 284
 285 transport-filter.pl: Makefile ../src/transport-filter.src
 286         @rm -f transport-filter.pl
 287         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 288           ../src/transport-filter.src > transport-filter.pl-t
 289         @mv transport-filter.pl-t transport-filter.pl
 290         @chmod a+x transport-filter.pl
 291         @echo ">>> transport-filter.pl script built"
 292
 293 convert4r3: Makefile ../src/convert4r3.src
 294         @rm -f convert4r3
 295         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 296           ../src/convert4r3.src > convert4r3-t
 297         @mv convert4r3-t convert4r3
 298         @chmod a+x convert4r3
 299         @echo ">>> convert4r3 script built"
 300
 301 convert4r4: Makefile ../src/convert4r4.src
 302         @rm -f convert4r4
 303         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 304           ../src/convert4r4.src > convert4r4-t
 305         @mv convert4r4-t convert4r4
 306         @chmod a+x convert4r4
 307         @echo ">>> convert4r4 script built"
 308
 309
 310 # These are objects of optional features. They are always compiled, but
 311 # if the corresponding #defines are not set, they wind up empty and
 312 # are thrown away by the linker.
 313
 314 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 315 OBJ_WITH_OLD_DEMIME = demime.o
 316 OBJ_EXPERIMENTAL = bmi_spam.o \
 317                                 dane.o \
 318                                 dcc.o \
 319                                 dmarc.o \
 320                                 imap_utf7.o \
 321                                 spf.o \
 322                                 srs.o \
 323                                 utf8.o
 324
 325 # Targets for final binaries; the main one has a build number which is
 326 # updated each time. We don't bother with that for the auxiliaries.
 327
 328 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 329
 330 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 331         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 332         filtertest.o globals.o dkim.o \
 333         header.o host.o ip.o log.o lss.o match.o moan.o \
 334         os.o parse.o queue.o \
 335         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 336         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 337         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 338         environment.o \
 339         $(OBJ_LOOKUPS) \
 340         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 341         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 342
 343 exim:   buildlookups buildauths pdkim/pdkim.a \
 344         buildrouters buildtransports \
 345         $(OBJ_EXIM) version.o
 346         @echo "$(LNCC) -o exim"
 347         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 348           routers/routers.a transports/transports.a lookups/lookups.a \
 349           auths/auths.a pdkim/pdkim.a \
 350           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 351           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 352           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 353         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 354           echo $(STRIP_COMMAND) exim; \
 355           $(STRIP_COMMAND) exim; \
 356         fi
 357         $(EXIM_CHMOD)
 358         @echo " "
 359         @echo ">>> exim binary built"
 360         @echo " "
 361
 362 # The utility for dumping the contents of an exim database
 363
 364 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 365
 366 exim_dumpdb: $(OBJ_DUMPDB)
 367         @echo "$(LNCC) -o exim_dumpdb"
 368         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 369           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 370         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 371           echo $(STRIP_COMMAND) exim_dumpdb; \
 372           $(STRIP_COMMAND) exim_dumpdb; \
 373         fi
 374         @echo ">>> exim_dumpdb utility built"
 375         @echo " "
 376
 377 # The utility for interrogating/fixing the contents of an exim database
 378
 379 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 380
 381 exim_fixdb:  $(OBJ_FIXDB) buildauths
 382         @echo "$(LNCC) -o exim_fixdb"
 383         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 384           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
 385         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 386           echo $(STRIP_COMMAND) exim_fixdb; \
 387           $(STRIP_COMMAND) exim_fixdb; \
 388         fi
 389         @echo ">>> exim_fixdb utility built"
 390         @echo " "
 391
 392 # The utility for tidying the contents of an exim database
 393
 394 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 395
 396 exim_tidydb: $(OBJ_TIDYDB)
 397         @echo "$(LNCC) -o exim_tidydb"
 398         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 399           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 400         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 401           echo $(STRIP_COMMAND) exim_tidydb; \
 402           $(STRIP_COMMAND) exim_tidydb; \
 403         fi
 404         @echo ">>> exim_tidydb utility built"
 405         @echo " "
 406
 407 # The utility for building dbm files
 408
 409 exim_dbmbuild: exim_dbmbuild.o
 410         @echo "$(LNCC) -o exim_dbmbuild"
 411         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 412           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 413         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 414           echo $(STRIP_COMMAND) exim_dbmbuild; \
 415           $(STRIP_COMMAND) exim_dbmbuild; \
 416         fi
 417         @echo ">>> exim_dbmbuild utility built"
 418         @echo " "
 419
 420 # The utility for locking a mailbox while messing around with it
 421
 422 exim_lock: exim_lock.c os.h
 423         @echo "$(CC) exim_lock.c"
 424         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 425         @echo "$(LNCC) -o exim_lock"
 426         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 427           $(LIBS) $(EXTRALIBS)
 428         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 429           echo $(STRIP_COMMAND) exim_lock; \
 430           $(STRIP_COMMAND) exim_lock; \
 431         fi
 432         @echo ">>> exim_lock utility built"
 433         @echo " "
 434
 435 # The X-based Exim monitor program's binary part. There's a macro for cutting
 436 # out the modified TextPop module, because some antique link editors cannot
 437 # handle the fact that it is redefining things that are found later in the
 438 # Xaw library.
 439
 440 # Object modules that are the unique Eximon modules
 441
 442 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 443         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 444         em_text.o em_xs.o
 445
 446 # The complete modules list also includes some specially compiled versions of
 447 # code from the main Exim source tree.
 448
 449 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
 450
 451 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 452             ../exim_monitor/em_version.c
 453         @echo "$(CC) exim_monitor/em_version.c"
 454         $(FE)$(CC) -o em_version.o -c \
 455           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 456         @echo "$(LNCC) -o eximon.bin"
 457         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 458         $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 459           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 460         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 461           echo $(STRIP_COMMAND) eximon.bin; \
 462           $(STRIP_COMMAND) eximon.bin; \
 463         fi
 464         @echo ">>> exim monitor binary built"
 465         @echo " "
 466
 467
 468 # Compile step for most of the exim modules. HDRS is a list of headers
 469 # which cause everthing to be rebuilt. PHDRS is the same, for the use
 470 # of routers, transports, and authenticators. I can't find a way of doing this
 471 # in one. This list is overkill, but it doesn't really take much time to
 472 # rebuild Exim on a modern computer.
 473
 474 HDRS  = config.h \
 475         dbfunctions.h \
 476         dbstuff.h \
 477         exim.h \
 478         functions.h \
 479         globals.h \
 480         local_scan.h \
 481         macros.h \
 482         mytypes.h \
 483         structs.h \
 484         os.h
 485 PHDRS = ../config.h \
 486         ../dbfunctions.h \
 487         ../dbstuff.h \
 488         ../exim.h \
 489         ../functions.h \
 490         ../globals.h \
 491         ../local_scan.h \
 492         ../macros.h \
 493         ../mytypes.h \
 494         ../structs.h \
 495         ../os.h
 496
 497 .SUFFIXES: .o .c
 498 .c.o:;  @echo "$(CC) $*.c"
 499         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 500
 501 # Update Exim's version information and build the version object.
 502
 503 version.h::
 504         @../scripts/reversion
 505
 506 cnumber.h: version.h
 507
 508 version.o: $(HDRS) cnumber.h version.h version.c
 509
 510 # This is the dummy module for use by test compiles of individual modules. It
 511 # contains functions such as log_write() that may be called from bits of Exim
 512 # in the tested code.
 513
 514 dummies.o:       dummies.c
 515
 516 # Compile instructions for perl.o for when EXIM_PERL is set
 517
 518 perl.o:          $(HDRS) perl.c
 519         @echo "$(PERL_CC) perl.c"
 520         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 521
 522 # Compile instructions for the database utility modules
 523
 524 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 525         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 526         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 527                                       -DCOMPILE_UTILITY \
 528                                       -DEXIM_DUMPDB \
 529                                       -o exim_dumpdb.o exim_dbutil.c
 530
 531 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 532         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 533         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 534                                       -DCOMPILE_UTILITY \
 535                                       -DEXIM_FIXDB \
 536                                       -o exim_fixdb.o exim_dbutil.c
 537
 538 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 539         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 540         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 541                                       -DCOMPILE_UTILITY \
 542                                       -DEXIM_TIDYDB \
 543                                       -o exim_tidydb.o exim_dbutil.c
 544
 545 # Compile instructions for exim_dbmbuild
 546
 547 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 548         @echo "$(CC) exim_dbmbuild.c"
 549         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
 550
 551 # Utilities use special versions of some modules - typically with debugging
 552 # calls cut out.
 553
 554 util-spool_in.o: $(HDRS) spool_in.c
 555         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 556         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 557
 558 util-store.o:    $(HDRS) store.c
 559         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 560         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 561
 562 util-string.o:   $(HDRS) string.c
 563         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 564         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 565
 566 util-os.o:       $(HDRS) os.c
 567         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 568         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 569                                       -DCOMPILE_UTILITY \
 570                                       -DOS_LOAD_AVERAGE \
 571                                       -DFIND_RUNNING_INTERFACES \
 572                                       -o util-os.o os.c
 573
 574 # The local scan module depends only on its own special header, and is compiled
 575 # from a source whose location is set by configuration.
 576
 577 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 578         @echo "$(CC) local_scan.c"
 579         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 580
 581 # Dependencies for the "ordinary" exim modules
 582
 583 acl.o:           $(HDRS) acl.c
 584 base64.o:        $(HDRS) mime.h base64.c
 585 child.o:         $(HDRS) child.c
 586 crypt16.o:       $(HDRS) crypt16.c
 587 daemon.o:        $(HDRS) daemon.c
 588 dbfn.o:          $(HDRS) dbfn.c
 589 debug.o:         $(HDRS) debug.c
 590 deliver.o:       $(HDRS) deliver.c
 591 directory.o:     $(HDRS) directory.c
 592 dns.o:           $(HDRS) dns.c
 593 enq.o:           $(HDRS) enq.c
 594 exim.o:          $(HDRS) exim.c
 595 expand.o:        $(HDRS) expand.c
 596 environment.o:   $(HDRS) environment.c
 597 filter.o:        $(HDRS) filter.c
 598 filtertest.o:    $(HDRS) filtertest.c
 599 globals.o:       $(HDRS) globals.c
 600 header.o:        $(HDRS) header.c
 601 host.o:          $(HDRS) host.c
 602 ip.o:            $(HDRS) ip.c
 603 log.o:           $(HDRS) log.c
 604 lss.o:           $(HDRS) lss.c
 605 match.o:         $(HDRS) match.c
 606 moan.o:          $(HDRS) moan.c
 607 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
 608 parse.o:         $(HDRS) parse.c
 609 queue.o:         $(HDRS) queue.c
 610 rda.o:           $(HDRS) rda.c
 611 readconf.o:      $(HDRS) readconf.c
 612 receive.o:       $(HDRS) receive.c
 613 retry.o:         $(HDRS) retry.c
 614 rewrite.o:       $(HDRS) rewrite.c
 615 rfc2047.o:       $(HDRS) rfc2047.c
 616 route.o:         $(HDRS) route.c
 617 search.o:        $(HDRS) search.c
 618 sieve.o:         $(HDRS) sieve.c
 619 smtp_in.o:       $(HDRS) smtp_in.c
 620 smtp_out.o:      $(HDRS) smtp_out.c
 621 spool_in.o:      $(HDRS) spool_in.c
 622 spool_out.o:     $(HDRS) spool_out.c
 623 std-crypto.o:    $(HDRS) std-crypto.c
 624 store.o:         $(HDRS) store.c
 625 string.o:        $(HDRS) string.c
 626 tls.o:           $(HDRS) tls.c \
 627                  tls-gnu.c tlscert-gnu.c \
 628                  tls-openssl.c tlscert-openssl.c
 629 tod.o:           $(HDRS) tod.c
 630 transport.o:     $(HDRS) transport.c
 631 tree.o:          $(HDRS) tree.c
 632 verify.o:        $(HDRS) verify.c
 633 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 634
 635 # Dependencies for WITH_CONTENT_SCAN modules
 636
 637 malware.o:       $(HDRS) malware.c
 638 mime.o:          $(HDRS) mime.h mime.c
 639 regex.o:         $(HDRS) regex.c
 640 spam.o:          $(HDRS) spam.c
 641 spool_mbox.o:    $(HDRS) spool_mbox.c
 642
 643
 644 # Dependencies for WITH_OLD_DEMIME modules
 645
 646 demime.o:       $(HDRS) demime.c
 647
 648
 649 # Dependencies for EXPERIMENTAL_* modules
 650
 651 bmi_spam.o:     $(HDRS) bmi_spam.c
 652 dane.o:         $(HDRS) dane.c dane-gnu.c dane-openssl.c
 653 dcc.o:          $(HDRS) dcc.h dcc.c
 654 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
 655 imap_utf7.o:    $(HDRS) imap_utf7.c
 656 spf.o:          $(HDRS) spf.h spf.c
 657 srs.o:          $(HDRS) srs.h srs.c
 658 utf8.o:         $(HDRS) utf8.c
 659
 660 # The module containing tables of available lookups, routers, auths, and
 661 # transports must be rebuilt if any of them are. However, because the makefiles
 662 # for the drivers are always run, we don't actually put the dependencies here,
 663 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 664 # drtables.o even though the .a files haven't in fact been updated. Instead
 665 # it is arranged that the lower-level makefiles remove drtables.o when they
 666 # rebuild the .a files.
 667
 668 drtables.o:      $(HDRS) drtables.c
 669
 670 # We depend upon object files built as part of building the lookups library
 671 # When using parallel make, we don't have the dependency to force building
 672 # in the sub-directory unless we force that dependency:
 673
 674 $(OBJ_LOOKUPS):  buildlookups
 675
 676 # The exim monitor's private modules - the sources live in a private
 677 # subdirectory. The final binary combines the private modules with some
 678 # modules from the main exim binary.
 679
 680 em_StripChart.o: ../exim_monitor/em_StripChart.c
 681 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 682 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 683 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 684 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 685 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 686 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 687 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 688 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 689 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 690 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 691 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 692 $(MONBIN): $(HDRS)
 693                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 694                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 695                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 696
 697
 698 # Targets for the various libraries that Exim uses.
 699
 700 # The lookups library.
 701
 702 buildlookups: config
 703          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 704            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 705            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
 706            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
 707          @echo " "
 708
 709 # The routers library.
 710
 711 buildrouters: config
 712          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 713            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 714            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 715          @echo " "
 716
 717 # The transports library.
 718
 719 buildtransports: config
 720          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 721            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 722            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 723          @echo " "
 724
 725 # The library of authorization modules
 726
 727 buildauths: config
 728          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 729            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 730            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 731          @echo " "
 732
 733 # The PDKIM library
 734
 735 buildpdkim: pdkim/pdkim.a
 736 pdkim/pdkim.a: config
 737          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 738            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 739            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 740          @echo " "
 741
 742 # The "clean", "install", and "makefile" targets just pass themselves back to
 743 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 744 # for them in the build directory.
 745
 746 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 747
 748 # Targets for building stand-alone testing programs for basic testing of
 749 # some of the building blocks. These are not integrated with the makefile-
 750 # building targets. If you change something that is going to cause the
 751 # makefile to be rebuilt, you must run "make makefile" before running one
 752 # of these.
 753
 754 # The testing programs use different versions of some modules - usually
 755 # with bits cut out that are not relevant to the test in hand. For those
 756 # that are used by several tests, we use a different name.
 757
 758 sa-globals.o:    $(HDRS) globals.c
 759         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 760
 761 sa-os.o:         $(HDRS) os.c
 762         $(CC) -c $(CFLAGS) $(INCLUDE) \
 763                                       -DFIND_RUNNING_INTERFACES \
 764                                       -o sa-os.o os.c
 765
 766 # These are the test targets themselves
 767
 768 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 769                string.o tod.o version.o utf8.o
 770         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 771         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 772           dummies.o sa-globals.o sa-os.o store.o string.o \
 773           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 774         rm -f dbfn.o
 775
 776 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 777                store.o string.o tod.o tree.o
 778         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 779         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 780         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 781         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 782         $(LNCC) -o test_host $(LFLAGS) \
 783           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 784           tod.o tree.o $(LIBS) $(LIBRESOLV)
 785         rm -f child.o dummies.o host.o dns.o
 786
 787 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 788         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 789         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 790           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 791         rm -f os.o
 792
 793 test_parse:  config.h parse.c dummies.o sa-globals.o \
 794              store.o string.o tod.o version.o utf8.o
 795         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 796         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 797           dummies.o sa-globals.o store.o string.o tod.o version.o \
 798           utf8.o $(LDFLAGS)
 799         rm -f parse.o
 800
 801 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 802         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 803         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 804           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 805         rm -f string.o
 806
 807 # End