src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatenates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7 #
   8 # Copyright (c) The Exim Maintainers 2016
   9
  10 SHELL      = $(MAKE_SHELL)
  11 SCRIPTS    = ../scripts
  12 O          = ../OS
  13 EDITME     = ../Local/Makefile
  14 EXIMON_EDITME = ../Local/eximon.conf
  15
  16 # The compiler used for linking is normally the same as the compiler used for
  17 # compiling. However, by giving it a different name, we can override it from
  18 # the command line, and this is helpful for certain types of testing.
  19
  20 LNCC = $(CC)
  21
  22 # The compile commands can be very long. To make the output look better,
  23 # they are not normally echoed in full. To get full echoing, the caller
  24 # must set FULLECHO='' on the command line and call make with -e. We default
  25 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  26
  27 FULLECHO = @
  28 FE       = $(FULLECHO)
  29
  30 # The default target double-checks the existence of $(EDITME) and then arranges
  31 # to touch it if it exists and any of the optional configuration files, which
  32 # depend on the os or the architecture, have been altered. The same sub-target
  33 # does the same thing for the eximon configuration file if it exists. Then
  34 # there is a check that the Makefile (the one built from this file) is
  35 # up-to-date. Then the os-specific source files and the C configuration file
  36 # are set up, and finally it goes to the main Exim target.
  37
  38 all:       utils exim
  39 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h macro.c
  40
  41 checklocalmake:
  42         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  43           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  44           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  45         then \
  46           touch $(EDITME); \
  47         fi
  48         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  49           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  50           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  51         then \
  52           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  53         fi
  54
  55 $(EDITME):
  56         @echo " "
  57         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  58         @echo "*** appropriate changes for your site."
  59         @echo " "
  60         @false
  61
  62 $(EXIMON_EDITME):
  63         @echo " "
  64         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  65         @echo "*** appropriate changes for your site."
  66         @echo " "
  67         @test ! -d ../Local && mkdir ../Local
  68         @false
  69
  70 # Check that the local Makefile is up-to-date
  71
  72 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  73           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  74         @echo " "
  75         @echo "*** Makefile needs rebuilding"
  76         @echo "*** Please run \"make makefile\" at top level"
  77         @echo " "
  78         @false
  79
  80 # Build (link) the os.h file
  81
  82 #os.h:  $(SCRIPTS)/Configure-os.h \
  83 #       $(O)/os.h-AIX           $(O)/os.h-BSDI  $(O)/os.h-cygwin \
  84 #       $(O)/os.h-Darwin        $(O)/os.h-DGUX  $(O)/os.h-DragonFly \
  85 #       $(O)/os.h-FreeBSD       $(O)/os.h-GNU   $(O)/os.h-GNUkFreeBSD \
  86 #       $(O)/os.h-GNUkNetBSD    $(O)/os.h-HI-OSF \
  87 #       $(O)/os.h-HI-UX         $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
  88 #       $(O)/os.h-IRIX          $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
  89 #       $(O)/os.h-IRIX65        $(O)/os.h-Linux $(O)/os.h-mips \
  90 #       $(O)/os.h-NetBSD        $(O)/os.h-NetBSD-a.out \
  91 #       $(O)/os.h-OpenBSD       $(O)/os.h-OpenUNIX      $(O)/os.h-OSF1 \
  92 #       $(O)/os.h-QNX           $(O)/os.h-SCO           $(O)/os.h-SCO_SV \
  93 #       $(O)/os.h-SunOS4        $(O)/os.h-SunOS5        $(O)/os.h-SunOS5-hal \
  94 #       $(O)/os.h-ULTRIX        $(O)/os.h-UNIX_SV \
  95 #       $(O)/os.h-Unixware7     $(O)/os.h-USG
  96 #       $(SHELL) $(SCRIPTS)/Configure-os.h
  97
  98 os.h:   $(SCRIPTS)/Configure-os.h \
  99         $(O)/os.h-FreeBSD       \
 100         $(O)/os.h-Linux         \
 101         $(O)/os.h-OpenBSD       \
 102         $(O)/os.h-SunOS5
 103         $(SHELL) $(SCRIPTS)/Configure-os.h
 104
 105 # Build the os.c file
 106
 107 #os.c:   ../src/os.c \
 108 #       $(SCRIPTS)/Configure-os.c \
 109 #       $(O)/os.c-cygwin        $(O)/os.c-GNU   $(O)/os.c-HI-OSF \
 110 #       $(O)/os.c-IRIX          $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
 111 #       $(O)/os.c-IRIX65        $(O)/os.c-Linux $(O)/os.c-OSF1
 112 #       $(SHELL) $(SCRIPTS)/Configure-os.c
 113
 114 os.c:   ../src/os.c \
 115         $(SCRIPTS)/Configure-os.c \
 116         $(O)/os.c-Linux
 117         $(SHELL) $(SCRIPTS)/Configure-os.c
 118
 119 # Build the config.h file.
 120
 121 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 122         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 123
 124 # Build the builtin-macros data struct
 125
 126 MACRO_HSRC = macro_predef.h os.h globals.h config.h \
 127         routers/accept.h routers/dnslookup.h routers/ipliteral.h \
 128         routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
 129         routers/redirect.h
 130
 131 OBJ_MACRO = macro_predef.o \
 132         macro-globals.o macro-readconf.o macro-route.o macro-transport.o macro-drtables.o \
 133         macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
 134         macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
 135         macro-manualroute.o macro-queryprogram.o macro-redirect.o \
 136         macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \
 137         macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-tls.o\
 138
 139 $(OBJ_MACRO):   $(MACRO_HSRC)
 140
 141 macro_predef.o :        macro_predef.c
 142         @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
 143         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
 144 macro-globals.o :       globals.c
 145         @echo "$(CC) -DMACRO_PREDEF globals.c"
 146         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
 147 macro-readconf.o :      readconf.c
 148         @echo "$(CC) -DMACRO_PREDEF readconf.c"
 149         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
 150 macro-route.o :         route.c
 151         @echo "$(CC) -DMACRO_PREDEF route.c"
 152         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
 153 macro-transport.o:      transport.c
 154         @echo "$(CC) -DMACRO_PREDEF transport.c"
 155         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
 156 macro-drtables.o :      drtables.c
 157         @echo "$(CC) -DMACRO_PREDEF drtables.c"
 158         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
 159 macro-appendfile.o :    transports/appendfile.c
 160         @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
 161         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
 162 macro-autoreply.o :     transports/autoreply.c
 163         @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
 164         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
 165 macro-lmtp.o:           transports/lmtp.c
 166         @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
 167         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
 168 macro-pipe.o :          transports/pipe.c
 169         @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
 170         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
 171 macro-queuefile.o :     transports/queuefile.c
 172         @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
 173         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
 174 macro-smtp.o :          transports/smtp.c
 175         @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
 176         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
 177 macro-accept.o :        routers/accept.c
 178         @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
 179         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
 180 macro-dnslookup.o :     routers/dnslookup.c
 181         @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
 182         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
 183 macro-ipliteral.o :     routers/ipliteral.c
 184         @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
 185         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
 186 macro-iplookup.o :      routers/iplookup.c
 187         @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
 188         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
 189 macro-manualroute.o :   routers/manualroute.c
 190         @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
 191         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
 192 macro-queryprogram.o :  routers/queryprogram.c
 193         @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
 194         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
 195 macro-redirect.o :      routers/redirect.c
 196         @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
 197         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
 198 macro-auth-spa.o :      auths/auth-spa.c
 199         @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
 200         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
 201 macro-cram_md5.o :      auths/cram_md5.c
 202         @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
 203         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
 204 macro-cyrus_sasl.o :    auths/cyrus_sasl.c
 205         @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
 206         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
 207 macro-dovecot.o:        auths/dovecot.c
 208         @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
 209         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
 210 macro-gsasl_exim.o :    auths/gsasl_exim.c
 211         @echo "$(CC) -DMACRO_PREDEF auths/gsasl_exim.c"
 212         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl_exim.c
 213 macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
 214         @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
 215         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
 216 macro-plaintext.o :     auths/plaintext.c
 217         @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
 218         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
 219 macro-spa.o :           auths/spa.c
 220         @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
 221         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
 222 macro-tls.o:            auths/tls.c
 223         @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
 224         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
 225
 226 macro_predef: $(OBJ_MACRO)
 227         @echo "$(LNCC) -o $@"
 228         $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
 229
 230 macro.c: macro_predef
 231         ./macro_predef > macro.c
 232
 233 # This target is recognized specially by GNU make. It records those targets
 234 # that do not correspond to files that are being built and which should
 235 # therefore always be run, even if the files exist. This shouldn't in fact be a
 236 # problem, but it does no harm. Other make programs will just ignore this.
 237
 238 .PHONY: all config utils \
 239         buildauths buildlookups buildpdkim buildrouters \
 240         buildtransports checklocalmake clean
 241
 242
 243 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 244         exigrep eximstats exipick exiqgrep exiqsumm \
 245         transport-filter.pl convert4r3 convert4r4 \
 246         exim_checkaccess \
 247         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 248
 249
 250 # Targets for special-purpose configuration header builders
 251 buildconfig: buildconfig.c
 252         @echo "$(CC) buildconfig.c"
 253         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 254
 255
 256 # Target for the exicyclog utility script
 257 exicyclog: config ../src/exicyclog.src
 258         @rm -f exicyclog
 259         @sed \
 260           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 261           -e "/^# /p" \
 262           -e "/^# /d" \
 263           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 264           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 265           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 266           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 267           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 268           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 269           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 270           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 271           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 272           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 273           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 274           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 275           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 276           ../src/exicyclog.src > exicyclog-t
 277         @mv exicyclog-t exicyclog
 278         @chmod a+x exicyclog
 279         @echo ">>> exicyclog script built"
 280
 281 # Target for the exinext utility script
 282 exinext: config ../src/exinext.src
 283         @rm -f exinext
 284         @sed \
 285           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 286           -e "/^# /p" \
 287           -e "/^# /d" \
 288           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 289           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 290           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 291           ../src/exinext.src > exinext-t
 292         @mv exinext-t exinext
 293         @chmod a+x exinext
 294         @echo ">>> exinext script built"
 295
 296 # Target for the exiwhat utility script
 297 exiwhat: config ../src/exiwhat.src
 298         @rm -f exiwhat
 299         @sed \
 300           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 301           -e "/^# /p" \
 302           -e "/^# /d" \
 303           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 304           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 305           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 306           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 307           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 308           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 309           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 310           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 311           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 312           ../src/exiwhat.src > exiwhat-t
 313         @mv exiwhat-t exiwhat
 314         @chmod a+x exiwhat
 315         @echo ">>> exiwhat script built"
 316
 317 # Target for the exim_checkaccess utility script
 318 exim_checkaccess: config ../src/exim_checkaccess.src
 319         @rm -f exim_checkaccess
 320         @sed \
 321           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 322           -e "/^# /p" \
 323           -e "/^# /d" \
 324           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 325           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 326           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 327           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 328           ../src/exim_checkaccess.src > exim_checkaccess-t
 329         @mv exim_checkaccess-t exim_checkaccess
 330         @chmod a+x exim_checkaccess
 331         @echo ">>> exim_checkaccess script built"; echo ""
 332
 333 # Target for the Exim monitor start-up script
 334 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 335           ../Local/eximon.conf
 336         @rm -f eximon
 337         $(SHELL) $(SCRIPTS)/Configure-eximon
 338         @sed \
 339           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 340           -e "/^# /p" \
 341           -e "/^# /d" \
 342           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 343           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 344           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 345           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 346           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 347           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 348           ../src/eximon.src >> eximon
 349         @echo ">>> eximon script built"; echo ""
 350
 351 # Targets for utilities; these are all Perl scripts that have to get the
 352 # location of Perl put in them. A few need other things as well.
 353
 354 exigrep: Makefile ../src/exigrep.src
 355         @rm -f exigrep
 356         @sed \
 357           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 358           -e "/^# /p" \
 359           -e "/^# /d" \
 360           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 361           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 362           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 363           ../src/exigrep.src > exigrep-t
 364         @mv exigrep-t exigrep
 365         @chmod a+x exigrep
 366         @echo ">>> exigrep script built"
 367
 368 eximstats: Makefile ../src/eximstats.src
 369         @rm -f eximstats
 370         @sed \
 371           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 372           ../src/eximstats.src > eximstats-t
 373         @mv eximstats-t eximstats
 374         @chmod a+x eximstats
 375         @echo ">>> eximstats script built"
 376
 377 exiqgrep: Makefile ../src/exiqgrep.src
 378         @rm -f exiqgrep
 379         @sed \
 380           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 381           -e "/^# /p" \
 382           -e "/^# /d" \
 383           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 384           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 385           ../src/exiqgrep.src > exiqgrep-t
 386         @mv exiqgrep-t exiqgrep
 387         @chmod a+x exiqgrep
 388         @echo ">>> exiqgrep script built"
 389
 390 exiqsumm: Makefile ../src/exiqsumm.src
 391         @rm -f exiqsumm
 392         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 393           ../src/exiqsumm.src > exiqsumm-t
 394         @mv exiqsumm-t exiqsumm
 395         @chmod a+x exiqsumm
 396         @echo ">>> exiqsumm script built"
 397
 398 exipick: Makefile ../src/exipick.src
 399         @rm -f exipick
 400         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 401           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 402           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 403           ../src/exipick.src > exipick-t
 404         @mv exipick-t exipick
 405         @chmod a+x exipick
 406         @echo ">>> exipick script built"
 407
 408 transport-filter.pl: Makefile ../src/transport-filter.src
 409         @rm -f transport-filter.pl
 410         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 411           ../src/transport-filter.src > transport-filter.pl-t
 412         @mv transport-filter.pl-t transport-filter.pl
 413         @chmod a+x transport-filter.pl
 414         @echo ">>> transport-filter.pl script built"
 415
 416 convert4r3: Makefile ../src/convert4r3.src
 417         @rm -f convert4r3
 418         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 419           ../src/convert4r3.src > convert4r3-t
 420         @mv convert4r3-t convert4r3
 421         @chmod a+x convert4r3
 422         @echo ">>> convert4r3 script built"
 423
 424 convert4r4: Makefile ../src/convert4r4.src
 425         @rm -f convert4r4
 426         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 427           ../src/convert4r4.src > convert4r4-t
 428         @mv convert4r4-t convert4r4
 429         @chmod a+x convert4r4
 430         @echo ">>> convert4r4 script built"
 431
 432
 433 # These are objects of optional features. They are always compiled, but
 434 # if the corresponding #defines are not set, they wind up empty and
 435 # are thrown away by the linker.
 436
 437 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 438 OBJ_EXPERIMENTAL = bmi_spam.o \
 439                                 dane.o \
 440                                 dcc.o \
 441                                 dmarc.o \
 442                                 imap_utf7.o \
 443                                 spf.o \
 444                                 srs.o \
 445                                 utf8.o
 446
 447 # Targets for final binaries; the main one has a build number which is
 448 # updated each time. We don't bother with that for the auxiliaries.
 449
 450 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 451
 452 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 453         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 454         filtertest.o globals.o dkim.o dkim_transport.o hash.o \
 455         header.o host.o ip.o log.o lss.o match.o moan.o \
 456         os.o parse.o queue.o \
 457         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 458         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 459         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 460         environment.o macro.o \
 461         $(OBJ_LOOKUPS) \
 462         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 463         $(OBJ_EXPERIMENTAL)
 464
 465 exim:   buildlookups buildauths pdkim/pdkim.a \
 466         buildrouters buildtransports \
 467         $(OBJ_EXIM) version.o
 468         @echo "$(LNCC) -o exim"
 469         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 470           routers/routers.a transports/transports.a lookups/lookups.a \
 471           auths/auths.a pdkim/pdkim.a \
 472           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 473           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 474           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 475         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 476           echo $(STRIP_COMMAND) exim; \
 477           $(STRIP_COMMAND) exim; \
 478         fi
 479         $(EXIM_CHMOD)
 480         @echo " "
 481         @echo ">>> exim binary built"
 482         @echo " "
 483
 484 # The utility for dumping the contents of an exim database
 485
 486 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 487
 488 exim_dumpdb: $(OBJ_DUMPDB)
 489         @echo "$(LNCC) -o exim_dumpdb"
 490         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 491           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 492         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 493           echo $(STRIP_COMMAND) exim_dumpdb; \
 494           $(STRIP_COMMAND) exim_dumpdb; \
 495         fi
 496         @echo ">>> exim_dumpdb utility built"
 497         @echo " "
 498
 499 # The utility for interrogating/fixing the contents of an exim database
 500
 501 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 502
 503 exim_fixdb:  $(OBJ_FIXDB) buildauths
 504         @echo "$(LNCC) -o exim_fixdb"
 505         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 506           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
 507         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 508           echo $(STRIP_COMMAND) exim_fixdb; \
 509           $(STRIP_COMMAND) exim_fixdb; \
 510         fi
 511         @echo ">>> exim_fixdb utility built"
 512         @echo " "
 513
 514 # The utility for tidying the contents of an exim database
 515
 516 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 517
 518 exim_tidydb: $(OBJ_TIDYDB)
 519         @echo "$(LNCC) -o exim_tidydb"
 520         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 521           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 522         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 523           echo $(STRIP_COMMAND) exim_tidydb; \
 524           $(STRIP_COMMAND) exim_tidydb; \
 525         fi
 526         @echo ">>> exim_tidydb utility built"
 527         @echo " "
 528
 529 # The utility for building dbm files
 530
 531 exim_dbmbuild: exim_dbmbuild.o
 532         @echo "$(LNCC) -o exim_dbmbuild"
 533         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 534           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 535         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 536           echo $(STRIP_COMMAND) exim_dbmbuild; \
 537           $(STRIP_COMMAND) exim_dbmbuild; \
 538         fi
 539         @echo ">>> exim_dbmbuild utility built"
 540         @echo " "
 541
 542 # The utility for locking a mailbox while messing around with it
 543
 544 exim_lock: exim_lock.c os.h
 545         @echo "$(CC) exim_lock.c"
 546         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 547         @echo "$(LNCC) -o exim_lock"
 548         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 549           $(LIBS) $(EXTRALIBS)
 550         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 551           echo $(STRIP_COMMAND) exim_lock; \
 552           $(STRIP_COMMAND) exim_lock; \
 553         fi
 554         @echo ">>> exim_lock utility built"
 555         @echo " "
 556
 557 # The X-based Exim monitor program's binary part. There's a macro for cutting
 558 # out the modified TextPop module, because some antique link editors cannot
 559 # handle the fact that it is redefining things that are found later in the
 560 # Xaw library.
 561
 562 # Object modules that are the unique Eximon modules
 563
 564 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 565         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 566         em_text.o em_xs.o
 567
 568 # The complete modules list also includes some specially compiled versions of
 569 # code from the main Exim source tree.
 570
 571 OBJ_MONBIN = util-spool_in.o \
 572              util-store.o \
 573              util-string.o \
 574              util-queue.o \
 575              util-tod.o \
 576              tree.o \
 577              $(MONBIN)
 578
 579 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 580             ../exim_monitor/em_version.c
 581         @echo "$(CC) exim_monitor/em_version.c"
 582         $(FE)$(CC) -o em_version.o -c \
 583           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 584         @echo "$(LNCC) -o eximon.bin"
 585         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 586           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 587           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 588         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 589           echo $(STRIP_COMMAND) eximon.bin; \
 590           $(STRIP_COMMAND) eximon.bin; \
 591         fi
 592         @echo ">>> exim monitor binary built"
 593         @echo " "
 594
 595
 596 # Compile step for most of the exim modules. HDRS is a list of headers
 597 # which cause everything to be rebuilt. PHDRS is the same, for the use
 598 # of routers, transports, and authenticators. I can't find a way of doing this
 599 # in one. This list is overkill, but it doesn't really take much time to
 600 # rebuild Exim on a modern computer.
 601
 602 HDRS  = blob.h \
 603         config.h \
 604         dbfunctions.h \
 605         dbstuff.h \
 606         exim.h \
 607         functions.h \
 608         globals.h \
 609         hash.h \
 610         local_scan.h \
 611         macros.h \
 612         mytypes.h \
 613         sha_ver.h \
 614         structs.h \
 615         os.h
 616 PHDRS = ../config.h \
 617         ../dbfunctions.h \
 618         ../dbstuff.h \
 619         ../exim.h \
 620         ../functions.h \
 621         ../globals.h \
 622         ../local_scan.h \
 623         ../macros.h \
 624         ../mytypes.h \
 625         ../structs.h \
 626         ../os.h
 627
 628 .SUFFIXES: .o .c
 629 .c.o:;  @echo "$(CC) $*.c"
 630         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 631
 632 # Update Exim's version information and build the version object.
 633
 634 version.h::
 635         @../scripts/reversion
 636
 637 cnumber.h: version.h
 638
 639 version.o: $(HDRS) cnumber.h version.h version.c
 640
 641 # This is the dummy module for use by test compiles of individual modules. It
 642 # contains functions such as log_write() that may be called from bits of Exim
 643 # in the tested code.
 644
 645 dummies.o:       dummies.c
 646
 647 # Compile instructions for perl.o for when EXIM_PERL is set
 648
 649 perl.o:          $(HDRS) perl.c
 650         @echo "$(PERL_CC) perl.c"
 651         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 652
 653 # Compile instructions for the database utility modules
 654
 655 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 656         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 657         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 658                                       -DCOMPILE_UTILITY \
 659                                       -DEXIM_DUMPDB \
 660                                       -o exim_dumpdb.o exim_dbutil.c
 661
 662 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 663         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 664         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 665                                       -DCOMPILE_UTILITY \
 666                                       -DEXIM_FIXDB \
 667                                       -o exim_fixdb.o exim_dbutil.c
 668
 669 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 670         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 671         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 672                                       -DCOMPILE_UTILITY \
 673                                       -DEXIM_TIDYDB \
 674                                       -o exim_tidydb.o exim_dbutil.c
 675
 676 # Compile instructions for exim_dbmbuild
 677
 678 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 679         @echo "$(CC) exim_dbmbuild.c"
 680         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
 681                 -o exim_dbmbuild.o exim_dbmbuild.c
 682
 683 # Utilities use special versions of some modules - typically with debugging
 684 # calls cut out.
 685
 686 util-spool_in.o: $(HDRS) spool_in.c
 687         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 688         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 689
 690 util-store.o:    $(HDRS) store.c
 691         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 692         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 693
 694 util-string.o:   $(HDRS) string.c
 695         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 696         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 697
 698 util-queue.o:   $(HDRS) queue.c
 699         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 700         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
 701
 702 util-tod.o:   $(HDRS) tod.c
 703         @echo "$(CC) -DCOMPILE_UTILITY tod.c"
 704         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
 705
 706 util-os.o:       $(HDRS) os.c
 707         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 708         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 709                                       -DCOMPILE_UTILITY \
 710                                       -DOS_LOAD_AVERAGE \
 711                                       -DFIND_RUNNING_INTERFACES \
 712                                       -o util-os.o os.c
 713
 714 # The local scan module depends only on its own special header, and is compiled
 715 # from a source whose location is set by configuration.
 716
 717 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 718         @echo "$(CC) local_scan.c"
 719         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 720
 721 # Dependencies for the "ordinary" exim modules
 722
 723 acl.o:           $(HDRS) acl.c
 724 base64.o:        $(HDRS) mime.h base64.c
 725 child.o:         $(HDRS) child.c
 726 crypt16.o:       $(HDRS) crypt16.c
 727 daemon.o:        $(HDRS) daemon.c
 728 dbfn.o:          $(HDRS) dbfn.c
 729 debug.o:         $(HDRS) debug.c
 730 deliver.o:       $(HDRS) transports/smtp.h deliver.c
 731 directory.o:     $(HDRS) directory.c
 732 dns.o:           $(HDRS) dns.c
 733 enq.o:           $(HDRS) enq.c
 734 exim.o:          $(HDRS) exim.c
 735 expand.o:        $(HDRS) expand.c
 736 environment.o:   $(HDRS) environment.c
 737 filter.o:        $(HDRS) filter.c
 738 filtertest.o:    $(HDRS) filtertest.c
 739 globals.o:       $(HDRS) globals.c
 740 hash.o:          $(HDRS) hash.c
 741 header.o:        $(HDRS) header.c
 742 host.o:          $(HDRS) host.c
 743 ip.o:            $(HDRS) ip.c
 744 log.o:           $(HDRS) log.c
 745 lss.o:           $(HDRS) lss.c
 746 match.o:         $(HDRS) match.c
 747 moan.o:          $(HDRS) moan.c
 748 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
 749 parse.o:         $(HDRS) parse.c
 750 queue.o:         $(HDRS) queue.c
 751 rda.o:           $(HDRS) rda.c
 752 readconf.o:      $(HDRS) readconf.c
 753 receive.o:       $(HDRS) receive.c
 754 retry.o:         $(HDRS) retry.c
 755 rewrite.o:       $(HDRS) rewrite.c
 756 rfc2047.o:       $(HDRS) rfc2047.c
 757 route.o:         $(HDRS) route.c
 758 search.o:        $(HDRS) search.c
 759 sieve.o:         $(HDRS) sieve.c
 760 smtp_in.o:       $(HDRS) smtp_in.c
 761 smtp_out.o:      $(HDRS) smtp_out.c
 762 spool_in.o:      $(HDRS) spool_in.c
 763 spool_out.o:     $(HDRS) spool_out.c
 764 std-crypto.o:    $(HDRS) std-crypto.c
 765 store.o:         $(HDRS) store.c
 766 string.o:        $(HDRS) string.c
 767 tls.o:           $(HDRS) tls.c \
 768                  tls-gnu.c tlscert-gnu.c \
 769                  tls-openssl.c tlscert-openssl.c
 770 tod.o:           $(HDRS) tod.c
 771 transport.o:     $(HDRS) transport.c
 772 tree.o:          $(HDRS) tree.c
 773 verify.o:        $(HDRS) transports/smtp.h verify.c
 774 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 775 dkim_transport.o: $(HDRS) dkim_transport.c
 776
 777 # Dependencies for WITH_CONTENT_SCAN modules
 778
 779 malware.o:       $(HDRS) malware.c
 780 mime.o:          $(HDRS) mime.h mime.c
 781 regex.o:         $(HDRS) regex.c
 782 spam.o:          $(HDRS) spam.c
 783 spool_mbox.o:    $(HDRS) spool_mbox.c
 784
 785
 786 # Dependencies for EXPERIMENTAL_* modules
 787
 788 bmi_spam.o:     $(HDRS) bmi_spam.c
 789 dane.o:         $(HDRS) dane.c dane-gnu.c dane-openssl.c
 790 dcc.o:          $(HDRS) dcc.h dcc.c
 791 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
 792 imap_utf7.o:    $(HDRS) imap_utf7.c
 793 spf.o:          $(HDRS) spf.h spf.c
 794 srs.o:          $(HDRS) srs.h srs.c
 795 utf8.o:         $(HDRS) utf8.c
 796
 797 # The module containing tables of available lookups, routers, auths, and
 798 # transports must be rebuilt if any of them are. However, because the makefiles
 799 # for the drivers are always run, we don't actually put the dependencies here,
 800 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 801 # drtables.o even though the .a files haven't in fact been updated. Instead
 802 # it is arranged that the lower-level makefiles remove drtables.o when they
 803 # rebuild the .a files.
 804
 805 drtables.o:      $(HDRS) drtables.c
 806
 807 # We depend upon object files built as part of building the lookups library
 808 # When using parallel make, we don't have the dependency to force building
 809 # in the sub-directory unless we force that dependency:
 810
 811 $(OBJ_LOOKUPS):  buildlookups
 812
 813 # The exim monitor's private modules - the sources live in a private
 814 # subdirectory. The final binary combines the private modules with some
 815 # modules from the main exim binary.
 816
 817 em_StripChart.o: ../exim_monitor/em_StripChart.c
 818 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 819 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 820 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 821 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 822 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 823 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 824 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 825 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 826 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 827 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 828 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 829 $(MONBIN): $(HDRS)
 830                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 831                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 832                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 833
 834
 835 # Targets for the various libraries that Exim uses.
 836
 837 # The lookups library.
 838
 839 buildlookups: config
 840          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 841            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 842            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
 843            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
 844          @echo " "
 845
 846 # The routers library.
 847
 848 buildrouters: config
 849          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 850            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 851            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 852          @echo " "
 853
 854 # The transports library.
 855
 856 buildtransports: config
 857          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 858            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 859            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 860          @echo " "
 861
 862 # The library of authorization modules
 863
 864 buildauths: config
 865          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 866            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 867            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 868          @echo " "
 869
 870 # The PDKIM library
 871
 872 buildpdkim: pdkim/pdkim.a
 873 pdkim/pdkim.a: config
 874          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 875            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 876            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 877          @echo " "
 878
 879 # The "clean", "install", and "makefile" targets just pass themselves back to
 880 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 881 # for them in the build directory.
 882
 883 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 884
 885 # Targets for building stand-alone testing programs for basic testing of
 886 # some of the building blocks. These are not integrated with the makefile-
 887 # building targets. If you change something that is going to cause the
 888 # makefile to be rebuilt, you must run "make makefile" before running one
 889 # of these.
 890
 891 # The testing programs use different versions of some modules - usually
 892 # with bits cut out that are not relevant to the test in hand. For those
 893 # that are used by several tests, we use a different name.
 894
 895 sa-globals.o:    $(HDRS) globals.c
 896         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 897
 898 sa-os.o:         $(HDRS) os.c
 899         $(CC) -c $(CFLAGS) $(INCLUDE) \
 900                                       -DFIND_RUNNING_INTERFACES \
 901                                       -o sa-os.o os.c
 902
 903 # These are the test targets themselves
 904
 905 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 906                string.o tod.o version.o utf8.o
 907         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 908         $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
 909         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 910           dummies.o sa-globals.o sa-os.o store.o string.o \
 911           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 912         rm -f dbfn.o store.o
 913
 914 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 915                store.o string.o tod.o tree.o
 916         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 917         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 918         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 919         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 920         $(LNCC) -o test_host $(LFLAGS) \
 921           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 922           tod.o tree.o $(LIBS) $(LIBRESOLV)
 923         rm -f child.o dummies.o host.o dns.o
 924
 925 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 926         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 927         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 928           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 929         rm -f os.o
 930
 931 test_parse:  config.h parse.c dummies.o sa-globals.o \
 932              store.o string.o tod.o version.o utf8.o
 933         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 934         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 935           dummies.o sa-globals.o store.o string.o tod.o version.o \
 936           utf8.o $(LDFLAGS)
 937         rm -f parse.o
 938
 939 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 940         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 941         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 942           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 943         rm -f string.o
 944
 945 # End