extern uschar *event_raise(uschar *, const uschar *, uschar *);
extern void msg_event_raise(const uschar *, const address_item *);
#endif
-extern uschar ehlo_response(uschar *, size_t, uschar);
extern const uschar * exim_errstr(int);
extern void exim_exit(int);
extern void exim_nullstd(void);
/* items below only used with option topt_use_bdat */
tpt_chunk_cmd_cb chunk_cb; /* per-datachunk callback */
- struct smtp_inblock * inblock;
- struct smtp_outblock * outblock;
- host_item * host;
- struct address_item * first_addr;
- struct address_item **sync_addr;
- BOOL pending_MAIL;
- BOOL pending_BDAT;
- BOOL good_RCPT;
- BOOL * completed_address;
- int cmd_count;
- uschar * buffer;
+ void * smtp_context;
} transport_ctx;
uschar *buffer, int *yield, uschar **message, BOOL *pass_message)
{
uschar * pl = pipelining_active ? US"pipelined " : US"";
+const uschar * s;
*yield = '4'; /* Default setting is to give a temporary error */
-/* Handle response timeout */
-
-if (*errno_value == ETIMEDOUT)
- {
- *message = US string_sprintf("SMTP timeout after %s%s",
- pl, smtp_command);
- if (transport_count > 0)
- *message = US string_sprintf("%s (%d bytes written)", *message,
- transport_count);
- return FALSE;
- }
-
-/* Handle malformed SMTP response */
-
-if (*errno_value == ERRNO_SMTPFORMAT)
- {
- const uschar *malfresp = string_printing(buffer);
- while (isspace(*malfresp)) malfresp++;
- *message = *malfresp == 0
- ? string_sprintf("Malformed SMTP reply (an empty line) "
- "in response to %s%s", pl, smtp_command)
- : string_sprintf("Malformed SMTP reply in response to %s%s: %s",
- pl, smtp_command, malfresp);
- return FALSE;
- }
-
-/* Handle a failed filter process error; can't send QUIT as we mustn't
-end the DATA. */
-
-if (*errno_value == ERRNO_FILTER_FAIL)
- {
- *message = US string_sprintf("transport filter process failed (%d)%s",
- more_errno,
- (more_errno == EX_EXECFAILED)? ": unable to execute command" : "");
- return FALSE;
- }
-
-/* Handle a failed add_headers expansion; can't send QUIT as we mustn't
-end the DATA. */
-
-if (*errno_value == ERRNO_CHHEADER_FAIL)
- {
- *message =
- US string_sprintf("failed to expand headers_add or headers_remove: %s",
- expand_string_message);
- return FALSE;
- }
-
-/* Handle failure to write a complete data block */
-
-if (*errno_value == ERRNO_WRITEINCOMPLETE)
+switch(*errno_value)
{
- *message = US string_sprintf("failed to write a data block");
- return FALSE;
- }
+ case ETIMEDOUT: /* Handle response timeout */
+ *message = US string_sprintf("SMTP timeout after %s%s",
+ pl, smtp_command);
+ if (transport_count > 0)
+ *message = US string_sprintf("%s (%d bytes written)", *message,
+ transport_count);
+ return FALSE;
+
+ case ERRNO_SMTPFORMAT: /* Handle malformed SMTP response */
+ s = string_printing(buffer);
+ while (isspace(*s)) s++;
+ *message = *s == 0
+ ? string_sprintf("Malformed SMTP reply (an empty line) "
+ "in response to %s%s", pl, smtp_command)
+ : string_sprintf("Malformed SMTP reply in response to %s%s: %s",
+ pl, smtp_command, s);
+ return FALSE;
+
+ case ERRNO_FILTER_FAIL: /* Handle a failed filter process error;
+ can't send QUIT as we mustn't end the DATA. */
+ *message = string_sprintf("transport filter process failed (%d)%s",
+ more_errno,
+ more_errno == EX_EXECFAILED ? ": unable to execute command" : "");
+ return FALSE;
+
+ case ERRNO_CHHEADER_FAIL: /* Handle a failed add_headers expansion;
+ can't send QUIT as we mustn't end the DATA. */
+ *message =
+ string_sprintf("failed to expand headers_add or headers_remove: %s",
+ expand_string_message);
+ return FALSE;
+
+ case ERRNO_WRITEINCOMPLETE: /* failure to write a complete data block */
+ *message = string_sprintf("failed to write a data block");
+ return FALSE;
#ifdef SUPPORT_I18N
-/* Handle lack of advertised SMTPUTF8, for international message */
-if (*errno_value == ERRNO_UTF8_FWD)
- {
- *message = US"utf8 support required but not offered for forwarding";
- DEBUG(D_deliver|D_transport) debug_printf("%s\n", *message);
- return TRUE;
- }
+ case ERRNO_UTF8_FWD: /* no advertised SMTPUTF8, for international message */
+ *message = US"utf8 support required but not offered for forwarding";
+ DEBUG(D_deliver|D_transport) debug_printf("%s\n", *message);
+ return TRUE;
#endif
+ }
/* Handle error responses from the remote mailer. */
if (buffer[0] != 0)
{
- const uschar *s = string_printing(buffer);
- *message = US string_sprintf("SMTP error from remote mail server after %s%s: "
- "%s", pl, smtp_command, s);
+ *message = string_sprintf("SMTP error from remote mail server after %s%s: "
+ "%s", pl, smtp_command, s = string_printing(buffer));
*pass_message = TRUE;
*yield = buffer[0];
return TRUE;
sync_responses(smtp_context * sx, int count, int pending_DATA)
{
address_item *addr = sx->sync_addr;
+smtp_transport_options_block *ob =
+ (smtp_transport_options_block *)sx->tblock->options_block;
int yield = 0;
/* Handle the response for a MAIL command. On error, reinstate the original
if (sx->pending_MAIL)
{
count--;
- if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2', ((smtp_transport_options_block *)sx->tblock->options_block)->command_timeout))
+ if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
+ '2', ob->command_timeout))
{
DEBUG(D_transport) debug_printf("bad response for MAIL\n");
Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */
while (count-- > 0)
{
if (!smtp_read_response(&sx->inblock, flushbuffer, sizeof(flushbuffer),
- '2', ((smtp_transport_options_block *)sx->tblock->options_block)->command_timeout)
+ '2', ob->command_timeout)
&& (errno != 0 || flushbuffer[0] == 0))
break;
}
/* The address was accepted */
addr->host_used = sx->host;
- if (smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2', ((smtp_transport_options_block *)sx->tblock->options_block)->command_timeout))
+ if (smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
+ '2', ob->command_timeout))
{
yield |= 1;
addr->transport_return = PENDING_OK;
else if (errno == ETIMEDOUT)
{
uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>",
- transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes));
+ transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes));
set_errno_nohost(sx->first_addr, ETIMEDOUT, message, DEFER, FALSE);
retry_add_item(addr, addr->address_retry_key, 0);
update_waiting = FALSE;
"%s", transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes),
string_printing(sx->buffer));
setflag(addr, af_pass_message);
- msglog_line(sx->host, addr->message);
+ if (!sx->verify)
+ msglog_line(sx->host, addr->message);
/* The response was 5xx */
addr->basic_errno = ERRNO_RCPT4XX;
addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ if (!sx->verify)
+ {
#ifndef DISABLE_EVENT
- event_defer_errno = addr->more_errno;
- msg_event_raise(US"msg:rcpt:host:defer", addr);
+ event_defer_errno = addr->more_errno;
+ msg_event_raise(US"msg:rcpt:host:defer", addr);
#endif
- /* Log temporary errors if there are more hosts to be tried.
- If not, log this last one in the == line. */
+ /* Log temporary errors if there are more hosts to be tried.
+ If not, log this last one in the == line. */
- if (sx->host->next)
- log_write(0, LOG_MAIN, "H=%s [%s]: %s", sx->host->name, sx->host->address, addr->message);
+ if (sx->host->next)
+ log_write(0, LOG_MAIN, "H=%s [%s]: %s",
+ sx->host->name, sx->host->address, addr->message);
#ifndef DISABLE_EVENT
- else
- msg_event_raise(US"msg:rcpt:defer", addr);
+ else
+ msg_event_raise(US"msg:rcpt:defer", addr);
#endif
- /* Do not put this message on the list of those waiting for specific
- hosts, as otherwise it is likely to be tried too often. */
+ /* Do not put this message on the list of those waiting for specific
+ hosts, as otherwise it is likely to be tried too often. */
- update_waiting = FALSE;
+ update_waiting = FALSE;
- /* Add a retry item for the address so that it doesn't get tried again
- too soon. If address_retry_include_sender is true, add the sender address
- to the retry key. */
+ /* Add a retry item for the address so that it doesn't get tried again
+ too soon. If address_retry_include_sender is true, add the sender address
+ to the retry key. */
- if (((smtp_transport_options_block *)sx->tblock->options_block)->address_retry_include_sender)
- {
- uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
- sender_address);
- retry_add_item(addr, altkey, 0);
- }
- else retry_add_item(addr, addr->address_retry_key, 0);
+ retry_add_item(addr,
+ ob->address_retry_include_sender
+ ? string_sprintf("%s:<%s>", addr->address_retry_key, sender_address)
+ : addr->address_retry_key,
+ 0);
+ }
}
}
} /* Loop for next RCPT response */
/* Update where to start at for the next block of responses, unless we
have already handled all the addresses. */
-if (addr != NULL) sx->sync_addr = addr->next;
+if (addr) sx->sync_addr = addr->next;
/* Handle a response to DATA. If we have not had any good recipients, either
previously or in this block, the response is ignored. */
if (pending_DATA != 0 &&
- !smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '3', ((smtp_transport_options_block *)sx->tblock->options_block)->command_timeout))
+ !smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
+ '3', ob->command_timeout))
{
int code;
uschar *msg;
-uschar
-ehlo_response(uschar * buf, size_t bsize, uschar checks)
+static uschar
+ehlo_response(uschar * buf, uschar checks)
{
+size_t bsize = Ustrlen(buf);
+
#ifdef SUPPORT_TLS
if ( checks & PEER_OFFERED_TLS
&& pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
{
smtp_transport_options_block * ob =
(smtp_transport_options_block *)(tctx->tblock->options_block);
+smtp_context * sx = tctx->smtp_context;
int cmd_count = 0;
int prev_cmd_count;
-uschar * buffer = tctx->buffer;
-smtp_context sx;
-
/* Write SMTP chunk header command */
if (chunk_size > 0)
{
- if((cmd_count = smtp_write_command(tctx->outblock, FALSE, "BDAT %u%s\r\n",
+ if((cmd_count = smtp_write_command(&sx->outblock, FALSE, "BDAT %u%s\r\n",
chunk_size,
flags & tc_chunk_last ? " LAST" : "")
) < 0) return ERROR;
data_command = string_copy(big_buffer); /* Save for later error message */
}
-prev_cmd_count = cmd_count += tctx->cmd_count;
+prev_cmd_count = cmd_count += sx->cmd_count;
/* Reap responses for any previous, but not one we just emitted */
if (chunk_size > 0)
prev_cmd_count--;
-if (tctx->pending_BDAT)
+if (sx->pending_BDAT)
prev_cmd_count--;
if (flags & tc_reap_prev && prev_cmd_count > 0)
{
- sx.first_addr = tctx->first_addr;
- sx.tblock = tctx->tblock;
- sx.sync_addr = *tctx->sync_addr;
- sx.host = tctx->host;
- sx.pending_MAIL = tctx->pending_MAIL;
- sx.inblock = *tctx->inblock;
-
DEBUG(D_transport) debug_printf("look for %d responses"
" for previous pipelined cmds\n", prev_cmd_count);
- switch(sync_responses(&sx, prev_cmd_count, 0))
+ switch(sync_responses(sx, prev_cmd_count, 0))
{
case 1: /* 2xx (only) => OK */
- case 3: tctx->good_RCPT = TRUE; /* 2xx & 5xx => OK & progress made */
- case 2: *tctx->completed_address = TRUE; /* 5xx (only) => progress made */
+ case 3: sx->good_RCPT = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: /* Timeout on RCPT */
default: return ERROR; /* I/O error, or any MAIL/DATA error */
}
- *tctx->sync_addr = sx.sync_addr;
cmd_count = 1;
- if (!tctx->pending_BDAT)
+ if (!sx->pending_BDAT)
pipelining_active = FALSE;
}
/* Reap response for an outstanding BDAT */
-if (tctx->pending_BDAT)
+if (sx->pending_BDAT)
{
DEBUG(D_transport) debug_printf("look for one response for BDAT\n");
- if (!smtp_read_response(tctx->inblock, sx.buffer, sizeof(sx.buffer), '2',
+ if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2',
ob->command_timeout))
{
- if (errno == 0 && sx.buffer[0] == '4')
+ if (errno == 0 && sx->buffer[0] == '4')
{
errno = ERRNO_DATA4XX; /*XXX does this actually get used? */
- tctx->first_addr->more_errno |=
- ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8;
+ sx->first_addr->more_errno |=
+ ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
return ERROR;
}
cmd_count--;
- tctx->pending_BDAT = FALSE;
+ sx->pending_BDAT = FALSE;
pipelining_active = FALSE;
}
else if (chunk_size > 0)
- tctx->pending_BDAT = TRUE;
+ sx->pending_BDAT = TRUE;
-tctx->cmd_count = cmd_count;
+sx->cmd_count = cmd_count;
return OK;
}
ctx connection context
suppress_tls if TRUE, don't attempt a TLS connection - this is set for
a second attempt after TLS initialization fails
- verify TRUE if connection is for a verify callout, FALSE for
- a delivery attempt
Returns: OK - the connection was made and the delivery attempted;
fd is set in the conn context, tls_out set up.
to expand
*/
int
-smtp_setup_conn(smtp_context * sx, BOOL suppress_tls, BOOL verify)
+smtp_setup_conn(smtp_context * sx, BOOL suppress_tls)
{
#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
dns_answer tlsa_dnsa;
if (continue_hostname == NULL)
{
- if (verify)
+ if (sx->verify)
HDEBUG(D_verify) debug_printf("interface=%s port=%d\n", sx->interface, sx->port);
/* This puts port into host->port */
{
uschar * msg = NULL;
int save_errno = errno;
- if (verify)
+ if (sx->verify)
{
msg = strerror(errno);
HDEBUG(D_verify) debug_printf("connect: %s\n", msg);
}
set_errno_nohost(sx->addrlist,
save_errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : save_errno,
- verify ? string_sprintf("could not connect: %s", msg)
+ sx->verify ? string_sprintf("could not connect: %s", msg)
: NULL,
DEFER, FALSE);
sx->send_quit = FALSE;
if (sx->helo_data)
if (!(sx->helo_data = expand_string(sx->helo_data)))
- if (verify)
+ if (sx->verify)
log_write(0, LOG_MAIN|LOG_PANIC,
"<%s>: failed to expand transport's helo_data value for callout: %s",
sx->addrlist->address, expand_string_message);
if ((sx->helo_data = string_domain_utf8_to_alabel(sx->helo_data,
&expand_string_message)),
expand_string_message)
- if (verify)
+ if (sx->verify)
log_write(0, LOG_MAIN|LOG_PANIC,
"<%s>: failed to expand transport's helo_data value for callout: %s",
sx->addrlist->address, expand_string_message);
if (sx->esmtp || sx->lmtp)
{
- sx->peer_offered = ehlo_response(sx->buffer, Ustrlen(sx->buffer),
+ sx->peer_offered = ehlo_response(sx->buffer,
PEER_OFFERED_TLS /* others checked later */
);
if ( smtp_peer_options & PEER_OFFERED_TLS
&& !suppress_tls
&& verify_check_given_host(&sx->ob->hosts_avoid_tls, sx->host) != OK
- && ( !verify
+ && ( !sx->verify
|| verify_check_given_host(&sx->ob->hosts_verify_avoid_tls, sx->host) != OK
) )
{
{
if (sx->esmtp || sx->lmtp)
{
- sx->peer_offered = ehlo_response(sx->buffer, Ustrlen(sx->buffer),
+ sx->peer_offered = ehlo_response(sx->buffer,
0 /* no TLS */
| (sx->lmtp && sx->ob->lmtp_ignore_quota ? PEER_OFFERED_IGNQ : 0)
| PEER_OFFERED_CHUNKING
/*
Return:
- 0 good
- -1 MAIL response error, any read i/o error
- -2 non-MAIL response timeout
- -3 internal error; channel still usable
- -4 transmit failed
+ 0 good, rcpt results in addr->transport_return (PENDING_OK, DEFER, FAIL)
+ -1 MAIL response error
+ -2 any non-MAIL read i/o error
+ -3 non-MAIL response timeout
+ -4 internal error; channel still usable
+ -5 transmit failed
*/
int
if (build_mailcmd_options(sx, sx->first_addr) != OK)
{
*yield = ERROR;
- return -3;
+ return -4;
}
/* From here until we send the DATA command, we can make use of PIPELINING
{
set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE);
*yield = ERROR;
- return -3;
+ return -4;
}
setflag(sx->addrlist, af_utf8_downcvt);
}
switch(rc)
{
case -1: /* Transmission error */
- return -4;
+ return -5;
case +1: /* Cmd was sent */
if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2',
}
sx->pending_MAIL = FALSE;
break;
+
+ /* otherwise zero: command queued for pipeline */
}
/* Pass over all the relevant recipient addresses for this host, which are the
last address because we want to abort if any recipients have any kind of
problem, temporary or permanent. We know that all recipient addresses will have
the PENDING_DEFER status, because only one attempt is ever made, and we know
-that max_rcpt will be large, so all addresses will be done at once. */
+that max_rcpt will be large, so all addresses will be done at once.
+
+For verify we flush the pipeline after any (the only) rcpt address. */
for (addr = sx->first_addr, address_count = 0;
addr && address_count < sx->max_rcpt;
? dsn_support_yes : dsn_support_no;
address_count++;
- no_flush = pipelining_active && (!mua_wrapper || addr->next);
+ no_flush = pipelining_active && !sx->verify && (!mua_wrapper || addr->next);
build_rcptcmd_options(sx, addr);
{
/*XXX could we use a per-address errstr here? Not fail the whole send? */
errno = ERRNO_EXPANDFAIL;
- return -4; /*XXX too harsh? */
+ return -5; /*XXX too harsh? */
}
#endif
count = smtp_write_command(&sx->outblock, no_flush, "RCPT TO:<%s>%s%s\r\n",
rcpt_addr, sx->igquotstr, sx->buffer);
- if (count < 0) return -4;
+ if (count < 0) return -5;
if (count > 0)
{
switch(sync_responses(sx, count, 0))
{
case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */
case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
- break;
+ break;
case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
if (!sx->lmtp) /* can't tell about progress yet */
case 0: /* No 2xx or 5xx, but no probs */
break;
- case -1: return -2; /* Timeout on RCPT */
- default: return -1; /* I/O error, or any MAIL error */
+ case -1: return -3; /* Timeout on RCPT */
+ case -2: return -2; /* non-MAIL read i/o error */
+ default: return -1; /* any MAIL error */
}
sx->pending_MAIL = FALSE; /* Dealt with MAIL */
}
sx.interface = interface;
sx.helo_data = NULL;
sx.tblock = tblock;
+sx.verify = FALSE;
/* Get the channel set up ready for a message (MAIL FROM being the next
SMTP command to send */
-if ((rc = smtp_setup_conn(&sx, suppress_tls, FALSE)) != OK)
+if ((rc = smtp_setup_conn(&sx, suppress_tls)) != OK)
return rc;
/* If there is a filter command specified for this transport, we can now
set it up. This cannot be done until the identify of the host is known. */
-if (tblock->filter_command != NULL)
+if (tblock->filter_command)
{
BOOL rc;
uschar fbuf[64];
switch(smtp_write_mail_and_rcpt_cmds(&sx, &yield))
{
- case 0: break;
- case -1: goto RESPONSE_FAILED;
- case -2: goto END_OFF;
- case -3: goto SEND_QUIT;
- default: goto SEND_FAILED;
+ case 0: break;
+ case -1: case -2: goto RESPONSE_FAILED;
+ case -3: goto END_OFF;
+ case -4: goto SEND_QUIT;
+ default: goto SEND_FAILED;
}
/* If we are an MUA wrapper, abort if any RCPTs were rejected, either
tctx.check_string = tctx.escape_string = NULL;
tctx.options |= topt_use_bdat;
tctx.chunk_cb = smtp_chunk_cmd_callback;
- tctx.inblock = &sx.inblock;
- tctx.outblock = &sx.outblock;
- tctx.host = host;
- tctx.first_addr = sx.first_addr;
- tctx.sync_addr = &sx.sync_addr;
- tctx.pending_MAIL = sx.pending_MAIL;
- tctx.pending_BDAT = FALSE;
- tctx.good_RCPT = sx.ok;
- tctx.completed_address = &sx.completed_addr;
- tctx.cmd_count = 0;
- tctx.buffer = sx.buffer;
+ sx.pending_BDAT = FALSE;
+ sx.good_RCPT = sx.ok;
+ sx.cmd_count = 0;
+ tctx.smtp_context = &sx;
}
else
tctx.options |= topt_end_dot;
smtp_command = US"end of data";
- if (sx.peer_offered & PEER_OFFERED_CHUNKING && tctx.cmd_count > 1)
+ if (sx.peer_offered & PEER_OFFERED_CHUNKING && sx.cmd_count > 1)
{
/* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
- switch(sync_responses(&sx, tctx.cmd_count-1, 0))
+ switch(sync_responses(&sx, sx.cmd_count-1, 0))
{
case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */
case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */
int port;
uschar * interface;
+ BOOL verify:1;
BOOL lmtp:1;
BOOL smtps:1;
BOOL ok:1;
- BOOL send_rset:1;
- BOOL send_quit:1;
BOOL setting_up:1;
BOOL esmtp:1;
BOOL esmtp_sent:1;
- BOOL pending_MAIL:1;
#ifndef DISABLE_PRDR
BOOL prdr_active:1;
#endif
BOOL dane:1;
BOOL dane_required:1;
#endif
- BOOL completed_addr; /* pointer to this used by BDAT callback */
+ BOOL pending_MAIL:1;
+ BOOL pending_BDAT:1;
+ BOOL good_RCPT:1;
+ BOOL completed_addr:1;
+ BOOL send_rset:1;
+ BOOL send_quit:1;
int max_rcpt;
+ int cmd_count;
uschar peer_offered;
uschar * igquotstr;
smtp_transport_options_block * ob;
} smtp_context;
-extern int smtp_setup_conn(smtp_context *, BOOL, BOOL);
+extern int smtp_setup_conn(smtp_context *, BOOL);
+extern int smtp_write_mail_and_rcpt_cmds(smtp_context *, int *);
/* Data for reading the private options. */
Ustrcpy(resp, US"connection dropped");
addr->message =
- string_sprintf("response to \"%s\" from %s [%s] was: %s",
- big_buffer, host->name, host->address,
- string_printing(resp));
+ string_sprintf("response to \"%s\" was: %s",
+ big_buffer, string_printing(resp));
addr->user_message =
string_sprintf("Callout verification failed:\n%s", resp);
int port = 25;
uschar *interface = NULL; /* Outgoing interface to use; NULL => any */
smtp_context sx;
- uschar responsebuffer[4096];
if (!host->address)
{
/* Set IPv4 or IPv6 */
- host_af = Ustrchr(host->address, ':') == NULL ? AF_INET : AF_INET6;
+ host_af = Ustrchr(host->address, ':') ? AF_INET6 : AF_INET;
/* Expand and interpret the interface and port strings. The latter will not
be used if there is a host-specific port (e.g. from a manualroute router).
sx.interface = interface;
sx.helo_data = tf->helo_data;
sx.tblock = addr->transport;
+ sx.verify = TRUE;
tls_retry_connection:
/* Set the address state so that errors are recorded in it */
SMTP command to send. If we tried TLS but it failed, try again without
if permitted */
- if ( (yield = smtp_setup_conn(&sx, FALSE, TRUE)) == DEFER
+ if ( (yield = smtp_setup_conn(&sx, FALSE)) == DEFER
&& addr->basic_errno == ERRNO_TLSFAILURE
&& ob->tls_tempfail_tryclear
&& verify_check_given_host(&ob->hosts_require_tls, host) != OK
log_write(0, LOG_MAIN, "TLS session failure:"
" callout unencrypted to %s [%s] (not in hosts_require_tls)",
host->name, host->address);
- yield = smtp_setup_conn(&sx, TRUE, TRUE);
+ addr->transport_return = PENDING_DEFER;
+ yield = smtp_setup_conn(&sx, TRUE);
}
if (yield != OK)
{
- if (addr->message) addr->message = string_sprintf("%s [%s] %s",
- host->name, host->address, addr->message);
errno = addr->basic_errno;
transport_name = NULL;
deliver_host = deliver_host_address = NULL;
addr->authenticator = client_authenticator;
addr->auth_id = client_authenticated_id;
- /* Build a mail-AUTH string (re-using responsebuffer for convenience */
+ sx.from_addr = from_address;
+ sx.first_addr = sx.sync_addr = addr;
+ sx.ok = FALSE; /*XXX these 3 last might not be needed for verify? */
+ sx.send_rset = TRUE;
+ sx.completed_addr = FALSE;
- done =
- !smtp_mail_auth_str(responsebuffer, sizeof(responsebuffer), addr, ob);
+ new_domain_record.result =
+ old_domain_cache_result == ccache_reject_mfnull
+ ? ccache_reject_mfnull : ccache_accept;
- if (done)
- {
- addr->auth_sndr = client_authenticated_sender;
-
- /* Send the MAIL command */
-
- done =
- (smtp_write_command(&sx.outblock, FALSE,
-#ifdef SUPPORT_I18N
- addr->prop.utf8_msg && !addr->prop.utf8_downcvt
- ? "MAIL FROM:<%s>%s%s SMTPUTF8\r\n"
- :
-#endif
- "MAIL FROM:<%s>%s%s\r\n",
- from_address,
- responsebuffer,
- options & vopt_is_recipient && sx.peer_offered & PEER_OFFERED_SIZE
- ? string_sprintf(" SIZE=%d", message_size + ob->size_addition)
- : US""
- ) >= 0)
-
- && smtp_read_response(&sx.inblock, responsebuffer, sizeof(responsebuffer),
- '2', callout);
- }
-
- deliver_host = deliver_host_address = NULL;
- deliver_domain = save_deliver_domain;
+ /* Do the random local part check first. Temporarily replace the recipient
+ with the "random" value */
- /* If the host does not accept MAIL FROM:<>, arrange to cache this
- information, but again, don't record anything for an I/O error or a defer. Do
- not cache rejections of MAIL when a non-empty sender has been used, because
- that blocks the whole domain for all senders. */
-
- if (!done)
- {
- *failure_ptr = US"mail"; /* At or before MAIL */
- if (errno == 0 && responsebuffer[0] == '5')
- {
- setflag(addr, af_verify_nsfail);
- if (from_address[0] == 0)
- new_domain_record.result = ccache_reject_mfnull;
- }
- }
-
- /* Otherwise, proceed to check a "random" address (if required), then the
- given address, and the postmaster address (if required). Between each check,
- issue RSET, because some servers accept only one recipient after MAIL
- FROM:<>.
-
- Before doing this, set the result in the domain cache record to "accept",
- unless its previous value was ccache_reject_mfnull. In that case, the domain
- rejects MAIL FROM:<> and we want to continue to remember that. When that is
- the case, we have got here only in the case of a recipient verification with
- a non-null sender. */
-
- else
+ if (random_local_part)
{
+ uschar * main_address = addr->address;
const uschar * rcpt_domain = addr->domain;
#ifdef SUPPORT_I18N
}
#endif
- new_domain_record.result = old_domain_cache_result == ccache_reject_mfnull
- ? ccache_reject_mfnull : ccache_accept;
-
- /* Do the random local part check first */
+ /* This would be ok for 1st rcpt of a cutthrough (XXX do we have a count?) , but no way to
+ handle a subsequent because of the RSET. So refuse to support any. */
+ cancel_cutthrough_connection("random-recipient");
- if (random_local_part)
- {
- uschar randombuffer[1024];
- BOOL random_ok =
- smtp_write_command(&sx.outblock, FALSE,
- "RCPT TO:<%.1000s@%.1000s>\r\n", random_local_part,
- rcpt_domain) >= 0 &&
- smtp_read_response(&sx.inblock, randombuffer,
- sizeof(randombuffer), '2', callout);
-
- /* Remember when we last did a random test */
-
- new_domain_record.random_stamp = time(NULL);
-
- /* If accepted, we aren't going to do any further tests below. */
-
- if (random_ok)
- new_domain_record.random_result = ccache_accept;
-
- /* Otherwise, cache a real negative response, and get back to the right
- state to send RCPT. Unless there's some problem such as a dropped
- connection, we expect to succeed, because the commands succeeded above.
- However, some servers drop the connection after responding to an
- invalid recipient, so on (any) error we drop and remake the connection.
- */
-
- else if (errno == 0)
- {
- /* This would be ok for 1st rcpt a cutthrough, but no way to
- handle a subsequent. So refuse to support any */
- cancel_cutthrough_connection("random-recipient");
-
- if (randombuffer[0] == '5')
- new_domain_record.random_result = ccache_reject;
+ addr->address = string_sprintf("%s@%.1000s",
+ random_local_part, rcpt_domain);
+ done = FALSE;
+ if (smtp_write_mail_and_rcpt_cmds(&sx, &yield) == 0)
+ switch(addr->transport_return)
+ {
+ case PENDING_OK:
+ new_domain_record.random_result = ccache_accept;
+ break;
+ case FAIL:
+ new_domain_record.random_result = ccache_reject;
- done =
- smtp_write_command(&sx.outblock, FALSE, "RSET\r\n") >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer, sizeof(responsebuffer),
- '2', callout) &&
+ /* Between each check, issue RSET, because some servers accept only
+ one recipient after MAIL FROM:<>. */
- smtp_write_command(&sx.outblock, FALSE,
-#ifdef SUPPORT_I18N
- addr->prop.utf8_msg && !addr->prop.utf8_downcvt
- ? "MAIL FROM:<%s> SMTPUTF8\r\n"
- :
-#endif
- "MAIL FROM:<%s>\r\n",
- from_address) >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer, sizeof(responsebuffer),
- '2', callout);
+ if ((done =
+ smtp_write_command(&sx.outblock, FALSE, "RSET\r\n") >= 0 &&
+ smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer),
+ '2', callout)))
+ break;
- if (!done)
- {
HDEBUG(D_acl|D_v)
debug_printf("problem after random/rset/mfrom; reopen conn\n");
random_local_part = NULL;
#endif
HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
(void)close(sx.inblock.sock);
+ sx.inblock.sock = sx.outblock.sock = -1;
#ifndef DISABLE_EVENT
(void) event_raise(addr->transport->event_action,
US"tcp:close", NULL);
#endif
goto tls_retry_connection;
- }
- }
- else done = FALSE; /* Some timeout/connection problem */
- } /* Random check */
+ }
- /* If the host is accepting all local parts, as determined by the "random"
- check, we don't need to waste time doing any further checking. */
+ /* If accepted, we aren't going to do any further tests below.
+ Otherwise, cache a real negative response, and get back to the right
+ state to send RCPT. Unless there's some problem such as a dropped
+ connection, we expect to succeed, because the commands succeeded above.
+ However, some servers drop the connection after responding to an
+ invalid recipient, so on (any) error we drop and remake the connection.
+
+ XXX could we add another flag to the context, and have the common
+ code emit the RSET too? Even pipelined after the RCPT...
+ Then the main-verify call could use it if there's to be a subsequent
+ postmaster-verify.
+ The sync_responses() would need to be taught about it and we'd
+ need another return code filtering out to here.
+
+ Remember when we last did a random test
+ */
- if (new_domain_record.random_result != ccache_accept && done)
- {
- /* Get the rcpt_include_affixes flag from the transport if there is one,
- but assume FALSE if there is not. */
+ new_domain_record.random_stamp = time(NULL);
- uschar * rcpt = transport_rcpt_address(addr,
- addr->transport ? addr->transport->rcpt_include_affixes : FALSE);
+ /* Re-setup for main verify, or for the error message when failing */
+ addr->address = main_address;
+ addr->transport_return = PENDING_DEFER;
+ sx.first_addr = sx.sync_addr = addr;
+ sx.ok = FALSE;
+ sx.send_rset = TRUE;
+ sx.completed_addr = FALSE;
+ }
+ else
+ done = TRUE;
-#ifdef SUPPORT_I18N
- /*XXX should the conversion be moved into transport_rcpt_address() ? */
- if ( testflag(addr, af_utf8_downcvt)
- && !(rcpt = string_address_utf8_to_alabel(rcpt, NULL))
- )
- {
- errno = ERRNO_EXPANDFAIL;
- *failure_ptr = US"recipient";
- done = FALSE;
- }
- else
-#endif
+ /* Main verify. If the host is accepting all local parts, as determined
+ by the "random" check, we don't need to waste time doing any further
+ checking. */
- done =
- smtp_write_command(&sx.outblock, FALSE, "RCPT TO:<%.1000s>\r\n",
- rcpt) >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer, sizeof(responsebuffer),
- '2', callout);
+ if (done)
+ {
+ done = FALSE;
+ switch(smtp_write_mail_and_rcpt_cmds(&sx, &yield))
+ {
+ case 0: switch(addr->transport_return) /* ok so far */
+ {
+ case PENDING_OK: done = TRUE;
+ new_address_record.result = ccache_accept;
+ break;
+ case FAIL: done = TRUE;
+ yield = FAIL;
+ *failure_ptr = US"recipient";
+ new_address_record.result = ccache_reject;
+ break;
+ default: break;
+ }
+ break;
+
+ case -1: /* MAIL response error */
+ *failure_ptr = US"mail";
+ if (errno == 0 && sx.buffer[0] == '5')
+ {
+ setflag(addr, af_verify_nsfail);
+ if (from_address[0] == 0)
+ new_domain_record.result = ccache_reject_mfnull;
+ }
+ break;
+ /* non-MAIL read i/o error */
+ /* non-MAIL response timeout */
+ /* internal error; channel still usable */
+ default: break; /* transmit failed */
+ }
+ }
- if (done)
- new_address_record.result = ccache_accept;
- else if (errno == 0 && responsebuffer[0] == '5')
- {
- *failure_ptr = US"recipient";
- new_address_record.result = ccache_reject;
- }
+ addr->auth_sndr = client_authenticated_sender;
- /* Do postmaster check if requested; if a full check is required, we
- check for RCPT TO:<postmaster> (no domain) in accordance with RFC 821. */
+ deliver_host = deliver_host_address = NULL;
+ deliver_domain = save_deliver_domain;
- if (done && pm_mailfrom)
- {
- /* Could possibly shift before main verify, just above, and be ok
- for cutthrough. But no way to handle a subsequent rcpt, so just
- refuse any */
- cancel_cutthrough_connection("postmaster verify");
- HDEBUG(D_acl|D_v) debug_printf("Cutthrough cancelled by presence of postmaster verify\n");
-
- done =
- smtp_write_command(&sx.outblock, FALSE, "RSET\r\n") >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer,
- sizeof(responsebuffer), '2', callout) &&
-
- smtp_write_command(&sx.outblock, FALSE,
- "MAIL FROM:<%s>\r\n", pm_mailfrom) >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer,
- sizeof(responsebuffer), '2', callout) &&
-
- /* First try using the current domain */
-
- ((
- smtp_write_command(&sx.outblock, FALSE,
- "RCPT TO:<postmaster@%.1000s>\r\n", rcpt_domain) >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer,
- sizeof(responsebuffer), '2', callout)
- )
-
- ||
-
- /* If that doesn't work, and a full check is requested,
- try without the domain. */
-
- (
- (options & vopt_callout_fullpm) != 0 &&
- smtp_write_command(&sx.outblock, FALSE,
- "RCPT TO:<postmaster>\r\n") >= 0 &&
- smtp_read_response(&sx.inblock, responsebuffer,
- sizeof(responsebuffer), '2', callout)
- ));
-
- /* Sort out the cache record */
-
- new_domain_record.postmaster_stamp = time(NULL);
-
- if (done)
- new_domain_record.postmaster_result = ccache_accept;
- else if (errno == 0 && responsebuffer[0] == '5')
- {
- *failure_ptr = US"postmaster";
- setflag(addr, af_verify_pmfail);
- new_domain_record.postmaster_result = ccache_reject;
- }
- }
- } /* Random not accepted */
- } /* MAIL FROM: accepted */
+ /* Do postmaster check if requested; if a full check is required, we
+ check for RCPT TO:<postmaster> (no domain) in accordance with RFC 821. */
+ if (done && pm_mailfrom)
+ {
+ /* Could possibly shift before main verify, just above, and be ok
+ for cutthrough. But no way to handle a subsequent rcpt, so just
+ refuse any */
+ cancel_cutthrough_connection("postmaster verify");
+ HDEBUG(D_acl|D_v) debug_printf("Cutthrough cancelled by presence of postmaster verify\n");
+
+ done = smtp_write_command(&sx.outblock, FALSE, "RSET\r\n") >= 0
+ && smtp_read_response(&sx.inblock, sx.buffer,
+ sizeof(sx.buffer), '2', callout);
+
+ if (done)
+ {
+ uschar * main_address = addr->address;
+
+ /*XXX oops, affixes */
+ addr->address = string_sprintf("postmaster@%.1000s", addr->domain);
+ addr->transport_return = PENDING_DEFER;
+
+ sx.from_addr = pm_mailfrom;
+ sx.first_addr = sx.sync_addr = addr;
+ sx.ok = FALSE;
+ sx.send_rset = TRUE;
+ sx.completed_addr = FALSE;
+
+ if( smtp_write_mail_and_rcpt_cmds(&sx, &yield) == 0
+ && addr->transport_return == PENDING_OK
+ )
+ done = TRUE;
+ else
+ done = (options & vopt_callout_fullpm) != 0
+ && smtp_write_command(&sx.outblock, FALSE,
+ "RCPT TO:<postmaster>\r\n") >= 0
+ && smtp_read_response(&sx.inblock, sx.buffer,
+ sizeof(sx.buffer), '2', callout);
+
+ /* Sort out the cache record */
+
+ new_domain_record.postmaster_stamp = time(NULL);
+
+ if (done)
+ new_domain_record.postmaster_result = ccache_accept;
+ else if (errno == 0 && sx.buffer[0] == '5')
+ {
+ *failure_ptr = US"postmaster";
+ setflag(addr, af_verify_pmfail);
+ new_domain_record.postmaster_result = ccache_reject;
+ }
+
+ addr->address = main_address;
+ }
+ }
/* For any failure of the main check, other than a negative response, we just
close the connection and carry on. We can identify a negative response by the
fact that errno is zero. For I/O errors it will be non-zero
is not to be widely broadcast. */
no_conn:
- if (!done) switch(errno)
+ switch(errno)
{
case ETIMEDOUT:
HDEBUG(D_verify) debug_printf("SMTP timeout\n");
extern int acl_where; /* src/acl.c */
errno = 0;
addr->message = string_sprintf(
- "response to \"EHLO\" from %s [%s] did not include SMTPUTF8",
- host->name, host->address);
+ "response to \"EHLO\" did not include SMTPUTF8");
addr->user_message = acl_where == ACL_WHERE_RCPT
? US"533 no support for internationalised mailbox name"
: US"550 mailbox unavailable";
break;
case 0:
- if (*responsebuffer == 0) Ustrcpy(responsebuffer, US"connection dropped");
+ if (*sx.buffer == 0) Ustrcpy(sx.buffer, US"connection dropped");
- addr->message =
- string_sprintf("response to \"%s\" from %s [%s] was: %s",
- big_buffer, host->name, host->address,
- string_printing(responsebuffer));
+ /*XXX test here is ugly; seem to have a split of responsibility for
+ building this message. Need to reationalise. Where is it done
+ before here, and when not?
+ Not == 5xx resp to MAIL on main-verify
+ */
+ if (!addr->message) addr->message =
+ string_sprintf("response to \"%s\" was: %s",
+ big_buffer, string_printing(sx.buffer));
addr->user_message = options & vopt_is_recipient
- ? string_sprintf("Callout verification failed:\n%s", responsebuffer)
+ ? string_sprintf("Callout verification failed:\n%s", sx.buffer)
: string_sprintf("Called: %s\nSent: %s\nResponse: %s",
- host->address, big_buffer, responsebuffer);
+ host->address, big_buffer, sx.buffer);
/* Hard rejection ends the process */
- if (responsebuffer[0] == '5') /* Address rejected */
+ if (sx.buffer[0] == '5') /* Address rejected */
{
yield = FAIL;
done = TRUE;
(void) smtp_write_command(&sx.outblock, FALSE, "QUIT\r\n");
/* Wait a short time for response, and discard it */
- smtp_read_response(&sx.inblock, responsebuffer, sizeof(responsebuffer),
+ smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer),
'2', 1);
}
}
}
+ if (!done || yield != OK)
+ addr->message = string_sprintf("%s [%s] : %s", host->name, host->address,
+ addr->message);
} /* Loop through all hosts, while !done */
}
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: response to "RCPT TO:<bad@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown user
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<bad@localhost>: 550 Unknown user
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <uncheckable@localhost1>: Could not complete sender verify callout: response to "RCPT TO:<uncheckable@localhost1>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <uncheckable@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<uncheckable@localhost1>: 450 Temporary error
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<uncheckable@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable2@localhost1>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 Error for <>
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable2@localhost1>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 Error for <>
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<uncheckable2@localhost1> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable@localhost1>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550-Multiline error for <>\n550 Here's the second line
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable@localhost1>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550-Multiline error for <>\n550 Here's the second line
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<uncheckable@localhost1> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: response to "RCPT TO:<z@remote.domain>" from 127.0.0.1 [127.0.0.1] was: 550 Recipient not liked
-1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: response to "RCPT TO:<z@remote.domain>" from 127.0.0.1 [127.0.0.1] was: 550-Recipient not liked on two lines\n550 Here's the second
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.domain>: 550 Recipient not liked
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.domain>: 550-Recipient not liked on two lines\n550 Here's the second
1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> temporarily rejected RCPT <z@remote.domain>: Could not complete recipient verify callout
1999-03-02 09:44:33 10HmaX-0005vi-00 H=[V4NET.0.0.4] U=root F=<uncheckable@localhost1> rejected after DATA: there is no valid sender in any header line
1999-03-02 09:44:33 10HmaY-0005vi-00 H=[V4NET.0.0.4] U=root F=<uncheckable@localhost1> rejected after DATA: there is no valid sender in any header line
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
-1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: response to "RCPT TO:<postmaster@localhost1>" from 127.0.0.1 [127.0.0.1] was: 550 Don't like postmaster
+1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost1>: 550 Don't like postmaster
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: response to "RCPT TO:<z@remote.lmtp>" from 127.0.0.1 [127.0.0.1] was: 550 Recipient not liked
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] Remote host closed connection in response to initial connection
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.lmtp>: 550 Recipient not liked
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : Remote host closed connection in response to initial connection
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
1999-03-02 09:44:33 10HmaX-0005vi-00 U=CALLER F=<> rejected after DATA: '>' missing at end of address: failing address in "From:" header is: <bad@syntax
1999-03-02 09:44:33 10HmaY-0005vi-00 U=CALLER F=<> rejected after DATA: there is no valid sender in any header line
-1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<callout@x> temporarily rejected RCPT <x@y>: Could not complete sender verify callout
1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<nosyntax@x> rejected after DATA
1999-03-02 09:44:33 10HmbA-0005vi-00 U=CALLER F=<> rejected after DATA: there is no valid sender in any header line
-1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<> rejected RCPT <cantverify.fail@y>: failure message
1999-03-02 09:44:33 U=CALLER F=<> temporarily rejected RCPT <cantverify.defer@y>: defer message
1999-03-02 09:44:33 10HmbB-0005vi-00 U=CALLER F=<> rejected after DATA: '>' missing at end of address: failing address in "From:" header is: <bad@syntax
1999-03-02 09:44:33 10HmbC-0005vi-00 U=CALLER F=<> rejected after DATA: there is no valid sender in any header line
-1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<callout@x> temporarily rejected RCPT <x@y>: Could not complete sender verify callout
1999-03-02 09:44:33 10HmbD-0005vi-00 U=CALLER F=<nosyntax@x> rejected after DATA
1999-03-02 09:44:33 10HmbE-0005vi-00 U=CALLER F=<> rejected after DATA: there is no valid sender in any header line
-1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<> rejected RCPT <cantverify.fail@y>: failure message
1999-03-02 09:44:33 U=CALLER F=<> temporarily rejected RCPT <cantverify.defer@y>: defer message
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <ok@localhost>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <ok@localhost>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<ok@localhost> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: response to "RCPT TO:<bad@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 REJECTED
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<bad@localhost>: 550 REJECTED
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: (recipient): Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: (recipient): Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 REJECT MAIL FROM
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 REJECT MAIL FROM
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<ok@localhost> rejected RCPT <z@test.ex>: (mail): Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<ok@localhost> rejected RCPT <z@test.ex>: (mail): Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>: response to "RCPT TO:<postmaster@otherhost>" from 127.0.0.1 [127.0.0.1] was: 550 NOT OK
+1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@otherhost>: 550 NOT OK
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<ok@otherhost> rejected RCPT <z@test.ex>: Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<ok@otherhost> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify defer for <okok@otherhost51>: Could not complete sender verify callout
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root sender verify defer for <ok@otherhost3>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : response to "RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost3>" was: 250 OK
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<ok@otherhost3> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
+1999-03-02 09:44:33 H=[V4NET.0.0.4] U=root sender verify defer for <ok@otherhost4>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : response to "RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost4>" was: 250 OK
+1999-03-02 09:44:33 H=[V4NET.0.0.4] U=root F=<ok@otherhost4> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
+1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify defer for <okok@otherhost51>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost51>
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<okok@otherhost51> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
1999-03-02 09:44:33 10HmaX-0005vi-00 <= ok7@otherhost53 H=[V4NET.0.0.7] U=root P=smtp S=sss
1999-03-02 09:44:33 10HmaY-0005vi-00 <= ok7@otherhost53 H=[V4NET.0.0.8] U=root P=smtp S=sss
-1999-03-02 09:44:33 U=CALLER Warning: Sender verify failed: response to "RCPT TO:<x@remote>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown
+1999-03-02 09:44:33 U=CALLER Warning: Sender verify failed: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<x@remote>: 550 Unknown
1999-03-02 09:44:33 U=CALLER Warning: some other warning
1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@test.ex U=CALLER P=local-smtp S=sss
1999-03-02 09:44:33 10HmaX-0005vi-00 => x <x@local> R=r1 T=t1
1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <z@remote>: response to "RCPT TO:<z@remote>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown
+1999-03-02 09:44:33 U=CALLER sender verify fail for <z@remote>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote>: 550 Unknown
1999-03-02 09:44:33 U=CALLER F=<z@remote> rejected RCPT <deny@local>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER Warning: Sender verify failed: response to "RCPT TO:<qq@remote>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown
+1999-03-02 09:44:33 U=CALLER Warning: Sender verify failed: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<qq@remote>: 550 Unknown
1999-03-02 09:44:33 U=CALLER Warning: Sender verify failed
1999-03-02 09:44:33 U=CALLER Warning: some other warning
-1999-03-02 09:44:33 U=CALLER sender verify defer for <r1@domain1>: Could not complete sender verify callout: response to "RCPT TO:<r1@domain1>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <r1@domain1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<r1@domain1>: 450 Temporary error
1999-03-02 09:44:33 U=CALLER temporarily rejected MAIL <r1@domain1>: Could not complete sender verify callout
-1999-03-02 09:44:33 U=CALLER sender verify defer for <r2@domain2>: Could not complete sender verify callout: response to "RCPT TO:<r2@domain2>" from ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] was: 450 Temporary error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <r2@domain2>: Could not complete sender verify callout: ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] : SMTP error from remote mail server after RCPT TO:<r2@domain2>: 450 Temporary error
1999-03-02 09:44:33 U=CALLER temporarily rejected MAIL <r2@domain2>: Could not complete sender verify callout
-1999-03-02 09:44:33 U=CALLER sender verify defer for <r3@domain3>: Could not complete sender verify callout: response to "RCPT TO:<r3@domain3>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <r3@domain3>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<r3@domain3>: 450 Temporary error
1999-03-02 09:44:33 U=CALLER temporarily rejected MAIL <r3@domain3>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <Ok@localhost>: response to "RCPT TO:<postmaster@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <Ok@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost>: 550 NO
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<Ok@localhost> rejected RCPT <checkpm@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <NOTok@elsewhere>: response to "RCPT TO:<NOTok@elsewhere>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <NOTok@elsewhere>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<NOTok@elsewhere>: 550 NO
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<NOTok@elsewhere> rejected RCPT <nocheckpm@test.ex>: Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<NOTok2@elsewhere> rejected RCPT <nocheckpm@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER F=<s3@other.ex> rejected RCPT r3@other.ex: response to "MAIL FROM:<s3@other.ex>" from 127.0.0.1 [127.0.0.1] was: 550 NOTOK
-1999-03-02 09:44:33 U=CALLER F=<s4@other.ex> temporarily rejected RCPT r4@other.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
-1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: response to "RCPT TO:<r9@test.ex>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 U=CALLER F=<s3@other.ex> rejected RCPT r3@other.ex: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<s3@other.ex>" was: 550 NOTOK
+1999-03-02 09:44:33 U=CALLER F=<s4@other.ex> temporarily rejected RCPT r4@other.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
+1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<r9@test.ex>: 550 NO
1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: Previous (cached) callout verification failure
-1999-03-02 09:44:33 U=CALLER sender verify fail for <x9@test.ex>: response to "RCPT TO:<x9@test.ex>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 U=CALLER sender verify fail for <x9@test.ex>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<x9@test.ex>: 550 NO
1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: Sender verify failed
1999-03-02 09:44:33 U=CALLER sender verify fail for <x9@test.ex>
1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout
-1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] SMTP timeout after initial connection
+1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after RCPT TO:<r11@two.test.ex>
+1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after initial connection
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userx@broken.example>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 I'm misconfigured
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userx@broken.example>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 I'm misconfigured
1999-03-02 09:44:33 U=CALLER rejected MAIL <userx@broken.example>: Sender verify failed
1999-03-02 09:44:33 U=CALLER sender verify fail for <userx@broken.example>
1999-03-02 09:44:33 U=CALLER rejected MAIL <userx@broken.example>: Sender verify failed
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= 세계의모든사람들이한국어를이해한다면얼마나좋을까@russian.почемужеонинеговорятпорусски.com U=CALLER P=utf8local-esmtp S=sss for userR@test.ex
1999-03-02 09:44:33 10HmaZ-0005vi-00 => userr@test.ex <userR@test.ex> F=<세계의모든사람들이한국어를이해한다면얼마나좋을까@russian.почемужеонинеговорятпорусски.com> R=rmt T=rmt_smtp H=127.0.0.1 [127.0.0.1] C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
-1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= userW@test.ex U=CALLER P=utf8local-esmtp S=sss for user.ഇരട്ടിമധുരം@test.ex
1999-03-02 09:44:33 10HmaZ-0005vi-00 => user.ഇരട്ടിമധുരം@test.ex F=<userW@test.ex> R=rmt T=rmt_smtp H=127.0.0.1 [127.0.0.1] C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userA@test.ex> rejected RCPT <user.यष्टिमधु@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userB.જેઠીમધ@test.ex> rejected RCPT <user.ქართული@test.ex>: Sender verify failed
******** SERVER ********
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= 세계의모든사람들이한국어를이해한다면얼마나좋을까@russian.почемужеонинеговорятпорусски.com U=CALLER P=utf8local-esmtp S=sss for userR@test.ex
1999-03-02 09:44:33 10HmaZ-0005vi-00 => userr@test.ex <userR@test.ex> F=<세계의모든사람들이한국어를이해한다면얼마나좋을까@russian.почемужеонинеговорятпорусски.com> R=rmt T=rmt_smtp H=127.0.0.1 [127.0.0.1] X=TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256 CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
-1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= userW@test.ex U=CALLER P=utf8local-esmtp S=sss for user.ഇരട്ടിമധുരം@test.ex
1999-03-02 09:44:33 10HmaZ-0005vi-00 => user.ഇരട്ടിമധുരം@test.ex F=<userW@test.ex> R=rmt T=rmt_smtp H=127.0.0.1 [127.0.0.1] X=TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256 CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userA@test.ex> rejected RCPT <user.यष्टिमधु@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userB.જેઠીમધ@test.ex> rejected RCPT <user.ქართული@test.ex>: Sender verify failed
******** SERVER ********
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= 세계의모든사람들이한국어를이해한다면얼마나좋을까@russian.почемужеонинеговорятпорусски.com U=CALLER P=utf8local-esmtp S=sss for userR@test.ex
1999-03-02 09:44:33 10HmaZ-0005vi-00 => userr@test.ex <userR@test.ex> F=<세계의모든사람들이한국어를이해한다면얼마나좋을까@russian.почемужеонинеговорятпорусски.com> R=rmt T=rmt_smtp H=127.0.0.1 [127.0.0.1] X=TLSv1:AES256-SHA:256 CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
-1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
******** SERVER ********
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
1999-03-02 09:44:33 10HmaZ-0005vi-00 <= userW@test.ex U=CALLER P=utf8local-esmtp S=sss for user.ഇരട്ടിമധുരം@test.ex
1999-03-02 09:44:33 10HmaZ-0005vi-00 => user.ഇരട്ടിമധുരം@test.ex F=<userW@test.ex> R=rmt T=rmt_smtp H=127.0.0.1 [127.0.0.1] X=TLSv1:AES256-SHA:256 CV=no C="250 OK id=10HmbA-0005vi-00"
1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userA@test.ex> rejected RCPT <user.यष्टिमधु@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userB.જેઠીમધ@test.ex> rejected RCPT <user.ქართული@test.ex>: Sender verify failed
******** SERVER ********
1999-03-02 09:44:33 10HmaX-0005vi-00 >> userx@domain.com R=all T=smtp H=127.0.0.1 [127.0.0.1] C="250 OK"
1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: response to "RCPT TO:<no@domain.com>" from 127.0.0.1 [127.0.0.1] was: 550 No mate
-1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: response to "RCPT TO:<no@domain.com>" from 127.0.0.1 [127.0.0.1] was: 550 Not that one
+1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<no@domain.com>: 550 No mate
+1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<no@domain.com>: 550 Not that one
1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss
1999-03-02 09:44:33 10HmaY-0005vi-00 => userx@domain.com R=all T=smtp H=127.0.0.1 [127.0.0.1] C="250 OK"
1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
1999-03-02 09:44:33 10HmbD-0005vi-00 >> userh@domain.com R=all T=smtp H=127.0.0.1 [127.0.0.1] C="250 OK"
1999-03-02 09:44:33 10HmbD-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local-esmtp S=sss for userh@domain.com
1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
-1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected RCPT <useri@domain.com>: Could not complete recipient verify callout: response to "RCPT TO:<useri@domain.com>" from 127.0.0.1 [127.0.0.1] was: 450 not right now
+1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected RCPT <useri@domain.com>: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<useri@domain.com>: 450 not right now
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: response to "RCPT TO:<bad@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown user
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<bad@localhost>: 550 Unknown user
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <uncheckable@localhost1>: Could not complete sender verify callout: response to "RCPT TO:<uncheckable@localhost1>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <uncheckable@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<uncheckable@localhost1>: 450 Temporary error
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<uncheckable@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable2@localhost1>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 Error for <>
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable2@localhost1>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 Error for <>
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<uncheckable2@localhost1> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable@localhost1>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550-Multiline error for <>\n550 Here's the second line
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable@localhost1>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550-Multiline error for <>\n550 Here's the second line
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<uncheckable@localhost1> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: response to "RCPT TO:<z@remote.domain>" from 127.0.0.1 [127.0.0.1] was: 550 Recipient not liked
-1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: response to "RCPT TO:<z@remote.domain>" from 127.0.0.1 [127.0.0.1] was: 550-Recipient not liked on two lines\n550 Here's the second
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.domain>: 550 Recipient not liked
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.domain>: 550-Recipient not liked on two lines\n550 Here's the second
1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> temporarily rejected RCPT <z@remote.domain>: Could not complete recipient verify callout
1999-03-02 09:44:33 10HmaX-0005vi-00 H=[V4NET.0.0.4] U=root F=<uncheckable@localhost1> rejected after DATA: there is no valid sender in any header line
Envelope-from: <uncheckable@localhost1>
for z@remote.domain; Tue, 2 Mar 1999 09:44:33 +0000
F From: abcd@x.y.z
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
-1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: response to "RCPT TO:<postmaster@localhost1>" from 127.0.0.1 [127.0.0.1] was: 550 Don't like postmaster
+1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost1>: 550 Don't like postmaster
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: response to "RCPT TO:<z@remote.lmtp>" from 127.0.0.1 [127.0.0.1] was: 550 Recipient not liked
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] Remote host closed connection in response to initial connection
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.lmtp>: 550 Recipient not liked
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : Remote host closed connection in response to initial connection
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
F From: bad@domain
I Message-Id: <E10HmaY-0005vi-00@the.local.host.name>
Date: Tue, 2 Mar 1999 09:44:33 +0000
-1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<callout@x> temporarily rejected RCPT <x@y>: Could not complete sender verify callout
1999-03-02 09:44:33 10HmaZ-0005vi-00 U=CALLER F=<nosyntax@x> rejected after DATA
Envelope-from: <nosyntax@x>
F From: <unverifiable@y>
I Message-Id: <E10HmbA-0005vi-00@the.local.host.name>
Date: Tue, 2 Mar 1999 09:44:33 +0000
-1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<> rejected RCPT <cantverify.fail@y>: failure message
1999-03-02 09:44:33 U=CALLER F=<> temporarily rejected RCPT <cantverify.defer@y>: defer message
1999-03-02 09:44:33 10HmbB-0005vi-00 U=CALLER F=<> rejected after DATA: '>' missing at end of address: failing address in "From:" header is: <bad@syntax
1999-03-02 09:44:33 10HmbC-0005vi-00 U=CALLER F=<> rejected after DATA: there is no valid sender in any header line
-1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <callout@x>: Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<callout@x> temporarily rejected RCPT <x@y>: Could not complete sender verify callout
1999-03-02 09:44:33 10HmbD-0005vi-00 U=CALLER F=<nosyntax@x> rejected after DATA
1999-03-02 09:44:33 10HmbE-0005vi-00 U=CALLER F=<> rejected after DATA: there is no valid sender in any header line
-1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error
+1999-03-02 09:44:33 U=CALLER F=<recipcallout@y> temporarily rejected RCPT <callout@y>: Could not complete recipient verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error
1999-03-02 09:44:33 U=CALLER F=<> rejected RCPT <cantverify.fail@y>: failure message
1999-03-02 09:44:33 U=CALLER F=<> temporarily rejected RCPT <cantverify.defer@y>: defer message
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <ok@localhost>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <ok@localhost>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<ok@localhost> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: response to "RCPT TO:<bad@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 REJECTED
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<bad@localhost>: 550 REJECTED
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: (recipient): Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: (recipient): Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 REJECT MAIL FROM
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 REJECT MAIL FROM
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<ok@localhost> rejected RCPT <z@test.ex>: (mail): Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<ok@localhost> rejected RCPT <z@test.ex>: (mail): Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>: response to "RCPT TO:<postmaster@otherhost>" from 127.0.0.1 [127.0.0.1] was: 550 NOT OK
+1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@otherhost>: 550 NOT OK
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<ok@otherhost> rejected RCPT <z@test.ex>: Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<ok@otherhost> rejected RCPT <z@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify defer for <okok@otherhost51>: Could not complete sender verify callout
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root sender verify defer for <ok@otherhost3>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : response to "RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost3>" was: 250 OK
+1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<ok@otherhost3> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
+1999-03-02 09:44:33 H=[V4NET.0.0.4] U=root sender verify defer for <ok@otherhost4>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : response to "RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost4>" was: 250 OK
+1999-03-02 09:44:33 H=[V4NET.0.0.4] U=root F=<ok@otherhost4> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
+1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify defer for <okok@otherhost51>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost51>
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<okok@otherhost51> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
-1999-03-02 09:44:33 U=CALLER sender verify fail for <z@remote>: response to "RCPT TO:<z@remote>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown
+1999-03-02 09:44:33 U=CALLER sender verify fail for <z@remote>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote>: 550 Unknown
1999-03-02 09:44:33 U=CALLER F=<z@remote> rejected RCPT <deny@local>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify defer for <r1@domain1>: Could not complete sender verify callout: response to "RCPT TO:<r1@domain1>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <r1@domain1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<r1@domain1>: 450 Temporary error
1999-03-02 09:44:33 U=CALLER temporarily rejected MAIL <r1@domain1>: Could not complete sender verify callout
-1999-03-02 09:44:33 U=CALLER sender verify defer for <r2@domain2>: Could not complete sender verify callout: response to "RCPT TO:<r2@domain2>" from ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] was: 450 Temporary error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <r2@domain2>: Could not complete sender verify callout: ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] : SMTP error from remote mail server after RCPT TO:<r2@domain2>: 450 Temporary error
1999-03-02 09:44:33 U=CALLER temporarily rejected MAIL <r2@domain2>: Could not complete sender verify callout
-1999-03-02 09:44:33 U=CALLER sender verify defer for <r3@domain3>: Could not complete sender verify callout: response to "RCPT TO:<r3@domain3>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+1999-03-02 09:44:33 U=CALLER sender verify defer for <r3@domain3>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<r3@domain3>: 450 Temporary error
1999-03-02 09:44:33 U=CALLER temporarily rejected MAIL <r3@domain3>: Could not complete sender verify callout
-1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <Ok@localhost>: response to "RCPT TO:<postmaster@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify fail for <Ok@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost>: 550 NO
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<Ok@localhost> rejected RCPT <checkpm@test.ex>: Sender verify failed
-1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <NOTok@elsewhere>: response to "RCPT TO:<NOTok@elsewhere>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root sender verify fail for <NOTok@elsewhere>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<NOTok@elsewhere>: 550 NO
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<NOTok@elsewhere> rejected RCPT <nocheckpm@test.ex>: Sender verify failed
1999-03-02 09:44:33 H=[V4NET.0.0.2] U=root F=<NOTok2@elsewhere> rejected RCPT <nocheckpm@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER F=<s3@other.ex> rejected RCPT r3@other.ex: response to "MAIL FROM:<s3@other.ex>" from 127.0.0.1 [127.0.0.1] was: 550 NOTOK
-1999-03-02 09:44:33 U=CALLER F=<s4@other.ex> temporarily rejected RCPT r4@other.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
-1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: response to "RCPT TO:<r9@test.ex>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 U=CALLER F=<s3@other.ex> rejected RCPT r3@other.ex: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<s3@other.ex>" was: 550 NOTOK
+1999-03-02 09:44:33 U=CALLER F=<s4@other.ex> temporarily rejected RCPT r4@other.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
+1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<r9@test.ex>: 550 NO
1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: Previous (cached) callout verification failure
-1999-03-02 09:44:33 U=CALLER sender verify fail for <x9@test.ex>: response to "RCPT TO:<x9@test.ex>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+1999-03-02 09:44:33 U=CALLER sender verify fail for <x9@test.ex>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<x9@test.ex>: 550 NO
1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: Sender verify failed
1999-03-02 09:44:33 U=CALLER sender verify fail for <x9@test.ex>
1999-03-02 09:44:33 U=CALLER F=<x9@test.ex> rejected RCPT <r9@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout
-1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] SMTP timeout after initial connection
+1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after RCPT TO:<r11@two.test.ex>
+1999-03-02 09:44:33 U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after initial connection
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userx@broken.example>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 I'm misconfigured
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userx@broken.example>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 I'm misconfigured
1999-03-02 09:44:33 U=CALLER rejected MAIL <userx@broken.example>: Sender verify failed
1999-03-02 09:44:33 U=CALLER sender verify fail for <userx@broken.example>
1999-03-02 09:44:33 U=CALLER rejected MAIL <userx@broken.example>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
-1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
******** SERVER ********
1999-03-02 09:44:33 H=localhost (the.local.host.name) [127.0.0.1] F=<> rejected RCPT <the.local.host.name-dddddddd-testing@test.ex>: relay not permitted
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userA@test.ex> rejected RCPT <user.यष्टिमधु@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userB.જેઠીમધ@test.ex> rejected RCPT <user.ქართული@test.ex>: Sender verify failed
******** SERVER ********
-1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
-1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
******** SERVER ********
1999-03-02 09:44:33 H=localhost (the.local.host.name) [127.0.0.1] X=TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256 CV=no F=<> rejected RCPT <the.local.host.name-dddddddd-testing@test.ex>: relay not permitted
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userA@test.ex> rejected RCPT <user.यष्टिमधु@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userB.જેઠીમધ@test.ex> rejected RCPT <user.ქართული@test.ex>: Sender verify failed
******** SERVER ********
-1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
-1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@spanish.PorquénopuedensimplementehablarenEspañol.local> rejected RCPT <userS@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER F=<CALLER@vietnamese.TạisaohọkhôngthểchỉnóitiếngViệt.local> rejected RCPT <userT@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
******** SERVER ********
1999-03-02 09:44:33 H=localhost (the.local.host.name) [127.0.0.1] X=TLSv1:AES256-SHA:256 CV=no F=<> rejected RCPT <the.local.host.name-dddddddd-testing@test.ex>: relay not permitted
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userA@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userA@test.ex> rejected RCPT <user.यष्टिमधु@test.ex>: Sender verify failed
-1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: response to "EHLO" from 127.0.0.1 [127.0.0.1] did not include SMTPUTF8
+1999-03-02 09:44:33 U=CALLER sender verify fail for <userB.જેઠીમધ@test.ex>: 127.0.0.1 [127.0.0.1] : response to "EHLO" did not include SMTPUTF8
1999-03-02 09:44:33 U=CALLER F=<userB.જેઠીમધ@test.ex> rejected RCPT <user.ქართული@test.ex>: Sender verify failed
******** SERVER ********
-1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: response to "RCPT TO:<no@domain.com>" from 127.0.0.1 [127.0.0.1] was: 550 No mate
-1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: response to "RCPT TO:<no@domain.com>" from 127.0.0.1 [127.0.0.1] was: 550 Not that one
+1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<no@domain.com>: 550 No mate
+1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> rejected RCPT <no@domain.com>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<no@domain.com>: 550 Not that one
1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected RCPT <userd@domain.com>
-1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected RCPT <useri@domain.com>: Could not complete recipient verify callout: response to "RCPT TO:<useri@domain.com>" from 127.0.0.1 [127.0.0.1] was: 450 not right now
+1999-03-02 09:44:33 U=CALLER F=<CALLER@myhost.test.ex> temporarily rejected RCPT <useri@domain.com>: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<useri@domain.com>: 450 not right now
250 OK
MAIL FROM
250 OK
-RCPT TO
+RCPT TO:<myhost.test.ex-
250 OK
QUIT
250 OK
250 OK
MAIL FROM
250 OK
-RCPT TO
+RCPT TO:<myhost.test.ex-
250 OK
QUIT
250 OK
220 Server ready
EHLO
250 OK
-MAIL FROM
+MAIL FROM:<>
250 OK
-RCPT TO
+RCPT TO:<myhost.test.ex-
550 NOT OK
RSET
250 OK
-MAIL FROM
+MAIL FROM:<>
250 OK
-RCPT TO
+RCPT TO:<ok@otherhost41>
250 OK
RSET
250 OK
-MAIL FROM
+MAIL FROM:<>
250 OK
-RCPT TO
+RCPT TO:<postmaster@otherhost41>
250 OK
QUIT
250 OK
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: response to "RCPT TO:<bad@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown user
+ H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<bad@localhost>: 550 Unknown user
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: Sender verify failed
LOG: smtp_connection MAIN
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify defer for <uncheckable@localhost1>: Could not complete sender verify callout: response to "RCPT TO:<uncheckable@localhost1>" from 127.0.0.1 [127.0.0.1] was: 450 Temporary error
+ H=[V4NET.0.0.1] U=root sender verify defer for <uncheckable@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<uncheckable@localhost1>: 450 Temporary error
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<uncheckable@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
LOG: smtp_connection MAIN
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable2@localhost1>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 Error for <>
+ H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable2@localhost1>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 Error for <>
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<uncheckable2@localhost1> rejected RCPT <z@test.ex>: Sender verify failed
LOG: smtp_connection MAIN
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable@localhost1>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550-Multiline error for <>\n550 Here's the second line
+ H=[V4NET.0.0.1] U=root sender verify fail for <uncheckable@localhost1>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550-Multiline error for <>\n550 Here's the second line
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<uncheckable@localhost1> rejected RCPT <z@test.ex>: Sender verify failed
LOG: smtp_connection MAIN
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: response to "RCPT TO:<z@remote.domain>" from 127.0.0.1 [127.0.0.1] was: 550 Recipient not liked
+ H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.domain>: 550 Recipient not liked
LOG: smtp_connection MAIN
SMTP connection from root closed by QUIT
LOG: smtp_connection MAIN
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: response to "RCPT TO:<z@remote.domain>" from 127.0.0.1 [127.0.0.1] was: 550-Recipient not liked on two lines\n550 Here's the second
+ H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.domain>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.domain>: 550-Recipient not liked on two lines\n550 Here's the second
LOG: smtp_connection MAIN
SMTP connection from root closed by QUIT
LOG: smtp_connection MAIN
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: response to "RCPT TO:<postmaster@localhost1>" from 127.0.0.1 [127.0.0.1] was: 550 Don't like postmaster
+ H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost1>: 550 Don't like postmaster
LOG: MAIN REJECT
H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: Sender verify failed
LOG: smtp_connection MAIN
SMTP<< 250- wotcher
250-SIZE
250 OK
- SMTP>> MAIL FROM:<>
+ SMTP>> MAIL FROM:<> SIZE=ssss
SMTP<< 250 OK
SMTP>> RCPT TO:<ok@localhost1>
SMTP<< 250 OK
SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: response to "RCPT TO:<z@remote.lmtp>" from 127.0.0.1 [127.0.0.1] was: 550 Recipient not liked
+ H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.lmtp>: 550 Recipient not liked
LOG: smtp_connection MAIN
SMTP connection from root closed by QUIT
LOG: smtp_connection MAIN
Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
SMTP(close)>>
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] Remote host closed connection in response to initial connection
+ H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : Remote host closed connection in response to initial connection
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
LOG: smtp_connection MAIN
SMTP connection from root
Connecting to 127.0.0.1 [127.0.0.1]:1224 ... failed: Connection refused
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
+ H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
LOG: smtp_connection MAIN
Connecting to 127.0.0.1 [127.0.0.1]:1224 ... failed: Connection refused
connect: Connection refused
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify defer for <ok@localhost>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] could not connect: Connection refused
+ H=[V4NET.0.0.1] U=root sender verify defer for <ok@localhost>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : could not connect: Connection refused
created log directory TESTSUITE/spool/log
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<ok@localhost> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
result=1 postmaster=0 random=0
wrote negative callout cache address record for bad@localhost
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: response to "RCPT TO:<bad@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 REJECTED
+ H=[V4NET.0.0.1] U=root sender verify fail for <bad@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<bad@localhost>: 550 REJECTED
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<bad@localhost> rejected RCPT <z@test.ex>: (recipient): Sender verify failed
LOG: smtp_connection MAIN
wrote callout cache domain record for localhost:
result=3 postmaster=0 random=0
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>: response to "MAIL FROM:<>" from 127.0.0.1 [127.0.0.1] was: 550 REJECT MAIL FROM
+ H=[V4NET.0.0.1] U=root sender verify fail for <ok@localhost>: 127.0.0.1 [127.0.0.1] : response to "MAIL FROM:<>" was: 550 REJECT MAIL FROM
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<ok@localhost> rejected RCPT <z@test.ex>: (mail): Sender verify failed
LOG: smtp_connection MAIN
result=1 postmaster=2 random=0
wrote positive callout cache address record for ok@otherhost
LOG: MAIN REJECT
- H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>: response to "RCPT TO:<postmaster@otherhost>" from 127.0.0.1 [127.0.0.1] was: 550 NOT OK
+ H=[V4NET.0.0.2] U=root sender verify fail for <ok@otherhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@otherhost>: 550 NOT OK
LOG: MAIN REJECT
H=[V4NET.0.0.2] U=root F=<ok@otherhost> rejected RCPT <z@test.ex>: Sender verify failed
LOG: smtp_connection MAIN
SMTP(close)>>
wrote callout cache domain record for otherhost3:
result=1 postmaster=0 random=1
+LOG: MAIN REJECT
+ H=[V4NET.0.0.3] U=root sender verify defer for <ok@otherhost3>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : response to "RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost3>" was: 250 OK
+LOG: MAIN REJECT
+ H=[V4NET.0.0.3] U=root F=<ok@otherhost3> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
LOG: smtp_connection MAIN
SMTP connection from root closed by QUIT
>>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
SMTP(close)>>
wrote callout cache domain record for otherhost4:
result=1 postmaster=0 random=1
+LOG: MAIN REJECT
+ H=[V4NET.0.0.4] U=root sender verify defer for <ok@otherhost4>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : response to "RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost4>" was: 250 OK
+LOG: MAIN REJECT
+ H=[V4NET.0.0.4] U=root F=<ok@otherhost4> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
LOG: smtp_connection MAIN
SMTP connection from root closed by QUIT
>>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
wrote callout cache domain record for otherhost51:
result=1 postmaster=0 random=0
LOG: MAIN REJECT
- H=[V4NET.0.0.5] U=root sender verify defer for <okok@otherhost51>: Could not complete sender verify callout
+ H=[V4NET.0.0.5] U=root sender verify defer for <okok@otherhost51>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after RCPT TO:<myhost.test.ex-dddddddd-testing@otherhost51>
LOG: MAIN REJECT
H=[V4NET.0.0.5] U=root F=<okok@otherhost51> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
LOG: smtp_connection MAIN
l_message: $acl_verify_message
warn: condition test succeeded in ACL "rcpt"
LOG: MAIN
- U=CALLER Warning: Sender verify failed: response to "RCPT TO:<qq@remote>" from 127.0.0.1 [127.0.0.1] was: 550 Unknown
+ U=CALLER Warning: Sender verify failed: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<qq@remote>: 550 Unknown
processing "accept"
check senders = qq@remote
address match test: subject=qq@remote pattern=qq@remote
>>> SMTP timeout
>>> ----------- end verify ------------
>>> accept: condition test deferred in ACL "mail"
-LOG: H=[1.2.3.4] sender verify defer for <p1@q>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] SMTP timeout after EHLO myhost.test.ex
+LOG: H=[1.2.3.4] sender verify defer for <p1@q>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after EHLO myhost.test.ex
LOG: H=[1.2.3.4] temporarily rejected MAIL <p1@q>: Could not complete sender verify callout
result=1 postmaster=2 random=0
wrote positive callout cache address record for Ok@localhost
LOG: MAIN REJECT
- H=[V4NET.0.0.1] U=root sender verify fail for <Ok@localhost>: response to "RCPT TO:<postmaster@localhost>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+ H=[V4NET.0.0.1] U=root sender verify fail for <Ok@localhost>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost>: 550 NO
created log directory TESTSUITE/spool/log
LOG: MAIN REJECT
H=[V4NET.0.0.1] U=root F=<Ok@localhost> rejected RCPT <checkpm@test.ex>: Sender verify failed
result=1 postmaster=0 random=0
wrote negative callout cache address record for NOTok@elsewhere
LOG: MAIN REJECT
- H=[V4NET.0.0.2] U=root sender verify fail for <NOTok@elsewhere>: response to "RCPT TO:<NOTok@elsewhere>" from 127.0.0.1 [127.0.0.1] was: 550 NO
+ H=[V4NET.0.0.2] U=root sender verify fail for <NOTok@elsewhere>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<NOTok@elsewhere>: 550 NO
LOG: MAIN REJECT
H=[V4NET.0.0.2] U=root F=<NOTok@elsewhere> rejected RCPT <nocheckpm@test.ex>: Sender verify failed
LOG: smtp_connection MAIN
wrote callout cache domain record for two.test.ex:
result=1 postmaster=0 random=0
LOG: MAIN REJECT
- U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout
+ U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after RCPT TO:<r11@two.test.ex>
LOG: smtp_connection MAIN
SMTP connection from CALLER closed by QUIT
>>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
SMTP(close)>>
SMTP timeout
LOG: MAIN REJECT
- U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] SMTP timeout after initial connection
+ U=CALLER F=<x11@two.test.ex> temporarily rejected RCPT r11@two.test.ex: Could not complete recipient verify callout: 127.0.0.1 [127.0.0.1] : SMTP timeout after initial connection
LOG: smtp_connection MAIN
SMTP connection from CALLER closed by QUIT
>>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
-cmd buf flush ddd bytes
- SMTP<< 250 OK
SMTP>> RCPT TO:<userx@domain.com>
cmd buf flush ddd bytes
+ SMTP<< 250 OK
SMTP<< 250 Accepted
holding verify callout open for cutthrough delivery
----------- end cutthrough setup ------------
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
-cmd buf flush ddd bytes
- SMTP<< 250 OK
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
+ SMTP<< 250 OK
SMTP<< 250 Accepted
holding verify callout open for cutthrough delivery
----------- end cutthrough setup ------------
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
-cmd buf flush ddd bytes
- SMTP<< 250 OK
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
+ SMTP<< 250 OK
SMTP<< 250 Accepted
holding verify callout open for cutthrough delivery
----------- end cutthrough setup ------------
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
-cmd buf flush ddd bytes
- SMTP<< 250 OK
SMTP>> RCPT TO:<userx@domain.com>
cmd buf flush ddd bytes
+ SMTP<< 250 OK
SMTP<< 250 Accepted
holding verify callout open for cutthrough delivery
----------- end cutthrough setup ------------
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
-cmd buf flush ddd bytes
- SMTP<< 250 OK
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
+ SMTP<< 250 OK
SMTP<< 250 Accepted
holding verify callout open for cutthrough delivery
----------- end cutthrough setup ------------
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
-cmd buf flush ddd bytes
- SMTP<< 250 OK
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
+ SMTP<< 250 OK
SMTP<< 250 Accepted
holding verify callout open for cutthrough delivery
----------- end cutthrough setup ------------
>>> ip4.ip4.ip4.ip4 in hosts_avoid_pipelining? no (option unset)
>>> ip4.ip4.ip4.ip4 in hosts_require_auth? no (option unset)
>>> SMTP>> MAIL FROM:<> SIZE=ssss
->>> cmd buf flush 24 bytes
->>> SMTP<< 250 OK
>>> SMTP>> RCPT TO:<rcptuser@dane256ee.test.ex>
->>> cmd buf flush 38 bytes
+>>> cmd buf flush 62 bytes
+>>> SMTP<< 250 OK
>>> SMTP<< 250 Accepted
>>> SMTP>> QUIT
>>> cmd buf flush 6 bytes
250- wotcher
250-SIZE
250 OK
-MAIL FROM:<>
+MAIL FROM:<> SIZE=ssss
250 OK
RCPT TO:<ok@localhost1>
250 OK
550-Rejected after DATA: could not verify "From:" header address\r
550 bad@domain: Unrouteable address\r
250 OK\r
-451-Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] could not connect: Network Error\r
+451-Could not complete sender verify callout: V4NET.0.0.0 [V4NET.0.0.0] : could not connect: Network Error\r
451-Could not complete sender verify callout for <callout@x>.\r
451-The mail server(s) for the domain may be temporarily unreachable, or\r
451-they may be permanently unreachable from this server. In the latter case,\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250 OK\r
-250 Accepted\r
+451 Could not complete sender verify callout\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250 OK\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250 OK\r
-250 Accepted\r
+451 Could not complete sender verify callout\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250 OK\r
250 Accepted\r
221 the.local.host.name closing connection\r
+++++++++++++++++++++++++++
+07-Mar-2000 12:21:52 other.ex callout=accept postmaster=unknown random=unknown
07-Mar-2000 12:21:52 r1@test.ex callout=accept
07-Mar-2000 12:21:52 r1@test.ex/<postmaster@the.local.host.name> callout=accept
07-Mar-2000 12:21:52 r1@test.ex/<s1@test.ex> callout=accept
250 Accepted\r
221 the.local.host.name closing connection\r
+++++++++++++++++++++++++++
+07-Mar-2000 12:21:52 other.ex callout=accept postmaster=unknown random=unknown
07-Mar-2000 12:21:52 r12@three.test.ex callout=accept
07-Mar-2000 12:21:52 r1@test.ex callout=accept
07-Mar-2000 12:21:52 r1@test.ex/<postmaster@the.local.host.name> callout=accept
250 OK
MAIL FROM:<>
250 OK
-RCPT TO:<r12@three.test.ex>
+RCPT TO:<the.local.host.name--testing@three.test.ex>
250 OK
QUIT
250 OK
git://git.exim.org / users / heiko / exim.git / commitdiff