{ "helo", sizeof("helo")-1, HELO_CMD, TRUE, FALSE },
{ "ehlo", sizeof("ehlo")-1, EHLO_CMD, TRUE, FALSE },
{ "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE },
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
{ "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE },
{ "tls_auth", 0, TLS_AUTH_CMD, FALSE, FALSE },
- #endif
+#endif
/* If you change anything above here, also fix the definitions below. */
How to do this properly in IPv6 is not yet known. */
- #if !HAVE_IPV6 && !defined(NO_IP_OPTIONS)
+#if !HAVE_IPV6 && !defined(NO_IP_OPTIONS)
#ifdef GLIBC_IP_OPTIONS
#if (!defined __GLIBC__) || (__GLIBC__ < 2)
else DEBUG(D_receive) debug_printf("no IP options found\n");
}
- #endif /* HAVE_IPV6 && !defined(NO_IP_OPTIONS) */
+#endif /* HAVE_IPV6 && !defined(NO_IP_OPTIONS) */
/* Set keep-alive in socket options. The option is on by default. This
setting is an attempt to get rid of some hanging connections that stick in
helo_verified = Ustrncmp(sender_helo_name+1, sender_host_address,
Ustrlen(sender_host_address)) == 0;
- #if HAVE_IPV6
+#if HAVE_IPV6
if (!helo_verified)
{
if (strncmpic(sender_host_address, US"::ffff:", 7) == 0)
helo_verified = Ustrncmp(sender_helo_name + 1,
sender_host_address + 7, Ustrlen(sender_host_address) - 7) == 0;
}
- #endif
+#endif
HDEBUG(D_receive)
{ if (helo_verified) debug_printf("matched host address\n"); }
AUTHS will eventually hit the nonmail threshold. */
case AUTH_CMD:
- HAD(SCH_AUTH);
- authentication_failed = TRUE;
- cmd_list[CMD_LIST_AUTH].is_mail_cmd = FALSE;
+ HAD(SCH_AUTH);
+ authentication_failed = TRUE;
+ cmd_list[CMD_LIST_AUTH].is_mail_cmd = FALSE;
- if (!auth_advertised && !allow_auth_unadvertised)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"AUTH command used when not advertised");
- break;
- }
- if (sender_host_authenticated)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"already authenticated");
- break;
- }
- if (sender_address)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"not permitted in mail transaction");
- break;
- }
+ if (!auth_advertised && !allow_auth_unadvertised)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"AUTH command used when not advertised");
+ break;
+ }
+ if (sender_host_authenticated)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"already authenticated");
+ break;
+ }
+ if (sender_address)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"not permitted in mail transaction");
+ break;
+ }
- /* Check the ACL */
+ /* Check the ACL */
- if ( acl_smtp_auth
- && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
- &user_msg, &log_msg)) != OK
- )
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- break;
- }
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ break;
+ }
- /* Find the name of the requested authentication mechanism. */
+ /* Find the name of the requested authentication mechanism. */
- s = smtp_cmd_data;
- while ((c = *smtp_cmd_data) != 0 && !isspace(c))
- {
- if (!isalnum(c) && c != '-' && c != '_')
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid character in authentication mechanism name");
- goto COMMAND_LOOP;
- }
- smtp_cmd_data++;
- }
+ s = smtp_cmd_data;
+ while ((c = *smtp_cmd_data) != 0 && !isspace(c))
+ {
+ if (!isalnum(c) && c != '-' && c != '_')
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid character in authentication mechanism name");
+ goto COMMAND_LOOP;
+ }
+ smtp_cmd_data++;
+ }
- /* If not at the end of the line, we must be at white space. Terminate the
- name and move the pointer on to any data that may be present. */
+ /* If not at the end of the line, we must be at white space. Terminate the
+ name and move the pointer on to any data that may be present. */
- if (*smtp_cmd_data != 0)
- {
- *smtp_cmd_data++ = 0;
- while (isspace(*smtp_cmd_data)) smtp_cmd_data++;
- }
+ if (*smtp_cmd_data != 0)
+ {
+ *smtp_cmd_data++ = 0;
+ while (isspace(*smtp_cmd_data)) smtp_cmd_data++;
+ }
- /* Search for an authentication mechanism which is configured for use
- as a server and which has been advertised (unless, sigh, allow_auth_
- unadvertised is set). */
+ /* Search for an authentication mechanism which is configured for use
+ as a server and which has been advertised (unless, sigh, allow_auth_
+ unadvertised is set). */
- for (au = auths; au; au = au->next)
- if (strcmpic(s, au->public_name) == 0 && au->server &&
- (au->advertised || allow_auth_unadvertised))
- break;
+ for (au = auths; au; au = au->next)
+ if (strcmpic(s, au->public_name) == 0 && au->server &&
+ (au->advertised || allow_auth_unadvertised))
+ break;
- if (au)
- {
- c = smtp_in_auth(au, &s, &ss);
+ if (au)
+ {
+ c = smtp_in_auth(au, &s, &ss);
- smtp_printf("%s\r\n", FALSE, s);
- if (c != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
- }
- else
- done = synprot_error(L_smtp_protocol_error, 504, NULL,
- string_sprintf("%s authentication mechanism not supported", s));
+ smtp_printf("%s\r\n", FALSE, s);
+ if (c != OK)
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
+ au->name, host_and_ident(FALSE), ss);
+ }
+ else
+ done = synprot_error(L_smtp_protocol_error, 504, NULL,
+ string_sprintf("%s authentication mechanism not supported", s));
- break; /* AUTH_CMD */
+ break; /* AUTH_CMD */
/* The HELO/EHLO commands are permitted to appear in the middle of a
session as well as at the beginning. They have the effect of a reset in
it did the reset first. */
case HELO_CMD:
- HAD(SCH_HELO);
- hello = US"HELO";
- esmtp = FALSE;
- goto HELO_EHLO;
+ HAD(SCH_HELO);
+ hello = US"HELO";
+ esmtp = FALSE;
+ goto HELO_EHLO;
case EHLO_CMD:
- HAD(SCH_EHLO);
- hello = US"EHLO";
- esmtp = TRUE;
+ HAD(SCH_EHLO);
+ hello = US"EHLO";
+ esmtp = TRUE;
HELO_EHLO: /* Common code for HELO and EHLO */
- cmd_list[CMD_LIST_HELO].is_mail_cmd = FALSE;
- cmd_list[CMD_LIST_EHLO].is_mail_cmd = FALSE;
+ cmd_list[CMD_LIST_HELO].is_mail_cmd = FALSE;
+ cmd_list[CMD_LIST_EHLO].is_mail_cmd = FALSE;
- /* Reject the HELO if its argument was invalid or non-existent. A
- successful check causes the argument to be saved in malloc store. */
+ /* Reject the HELO if its argument was invalid or non-existent. A
+ successful check causes the argument to be saved in malloc store. */
- if (!check_helo(smtp_cmd_data))
- {
- smtp_printf("501 Syntactically invalid %s argument(s)\r\n", FALSE, hello);
+ if (!check_helo(smtp_cmd_data))
+ {
+ smtp_printf("501 Syntactically invalid %s argument(s)\r\n", FALSE, hello);
- log_write(0, LOG_MAIN|LOG_REJECT, "rejected %s from %s: syntactically "
- "invalid argument(s): %s", hello, host_and_ident(FALSE),
- (*smtp_cmd_argument == 0)? US"(no argument given)" :
- string_printing(smtp_cmd_argument));
+ log_write(0, LOG_MAIN|LOG_REJECT, "rejected %s from %s: syntactically "
+ "invalid argument(s): %s", hello, host_and_ident(FALSE),
+ *smtp_cmd_argument == 0 ? US"(no argument given)" :
+ string_printing(smtp_cmd_argument));
- if (++synprot_error_count > smtp_max_synprot_errors)
- {
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
- done = 1;
- }
+ if (++synprot_error_count > smtp_max_synprot_errors)
+ {
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
+ "syntax or protocol errors (last command was \"%s\")",
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
+ done = 1;
+ }
- break;
- }
+ break;
+ }
- /* If sender_host_unknown is true, we have got here via the -bs interface,
- not called from inetd. Otherwise, we are running an IP connection and the
- host address will be set. If the helo name is the primary name of this
- host and we haven't done a reverse lookup, force one now. If helo_required
- is set, ensure that the HELO name matches the actual host. If helo_verify
- is set, do the same check, but softly. */
+ /* If sender_host_unknown is true, we have got here via the -bs interface,
+ not called from inetd. Otherwise, we are running an IP connection and the
+ host address will be set. If the helo name is the primary name of this
+ host and we haven't done a reverse lookup, force one now. If helo_required
+ is set, ensure that the HELO name matches the actual host. If helo_verify
+ is set, do the same check, but softly. */
- if (!sender_host_unknown)
- {
- BOOL old_helo_verified = helo_verified;
- uschar *p = smtp_cmd_data;
+ if (!sender_host_unknown)
+ {
+ BOOL old_helo_verified = helo_verified;
+ uschar *p = smtp_cmd_data;
- while (*p != 0 && !isspace(*p)) { *p = tolower(*p); p++; }
- *p = 0;
+ while (*p != 0 && !isspace(*p)) { *p = tolower(*p); p++; }
+ *p = 0;
- /* Force a reverse lookup if HELO quoted something in helo_lookup_domains
- because otherwise the log can be confusing. */
+ /* Force a reverse lookup if HELO quoted something in helo_lookup_domains
+ because otherwise the log can be confusing. */
- if ( !sender_host_name
- && (deliver_domain = sender_helo_name, /* set $domain */
- match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
- &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
- (void)host_name_lookup();
+ if ( !sender_host_name
+ && (deliver_domain = sender_helo_name, /* set $domain */
+ match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
+ &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
+ (void)host_name_lookup();
- /* Rebuild the fullhost info to include the HELO name (and the real name
- if it was looked up.) */
+ /* Rebuild the fullhost info to include the HELO name (and the real name
+ if it was looked up.) */
- host_build_sender_fullhost(); /* Rebuild */
- set_process_info("handling%s incoming connection from %s",
- (tls_in.active.sock >= 0)? " TLS" : "", host_and_ident(FALSE));
+ host_build_sender_fullhost(); /* Rebuild */
+ set_process_info("handling%s incoming connection from %s",
+ tls_in.active.sock >= 0 ? " TLS" : "", host_and_ident(FALSE));
- /* Verify if configured. This doesn't give much security, but it does
- make some people happy to be able to do it. If helo_required is set,
- (host matches helo_verify_hosts) failure forces rejection. If helo_verify
- is set (host matches helo_try_verify_hosts), it does not. This is perhaps
- now obsolescent, since the verification can now be requested selectively
- at ACL time. */
+ /* Verify if configured. This doesn't give much security, but it does
+ make some people happy to be able to do it. If helo_required is set,
+ (host matches helo_verify_hosts) failure forces rejection. If helo_verify
+ is set (host matches helo_try_verify_hosts), it does not. This is perhaps
+ now obsolescent, since the verification can now be requested selectively
+ at ACL time. */
- helo_verified = helo_verify_failed = sender_helo_dnssec = FALSE;
- if (helo_required || helo_verify)
- {
- BOOL tempfail = !smtp_verify_helo();
- if (!helo_verified)
- {
- if (helo_required)
- {
- smtp_printf("%d %s argument does not match calling host\r\n", FALSE,
- tempfail? 451 : 550, hello);
- log_write(0, LOG_MAIN|LOG_REJECT, "%srejected \"%s %s\" from %s",
- tempfail? "temporarily " : "",
- hello, sender_helo_name, host_and_ident(FALSE));
- helo_verified = old_helo_verified;
- break; /* End of HELO/EHLO processing */
- }
- HDEBUG(D_all) debug_printf("%s verification failed but host is in "
- "helo_try_verify_hosts\n", hello);
- }
- }
- }
+ helo_verified = helo_verify_failed = sender_helo_dnssec = FALSE;
+ if (helo_required || helo_verify)
+ {
+ BOOL tempfail = !smtp_verify_helo();
+ if (!helo_verified)
+ {
+ if (helo_required)
+ {
+ smtp_printf("%d %s argument does not match calling host\r\n", FALSE,
+ tempfail? 451 : 550, hello);
+ log_write(0, LOG_MAIN|LOG_REJECT, "%srejected \"%s %s\" from %s",
+ tempfail? "temporarily " : "",
+ hello, sender_helo_name, host_and_ident(FALSE));
+ helo_verified = old_helo_verified;
+ break; /* End of HELO/EHLO processing */
+ }
+ HDEBUG(D_all) debug_printf("%s verification failed but host is in "
+ "helo_try_verify_hosts\n", hello);
+ }
+ }
+ }
#ifdef SUPPORT_SPF
- /* set up SPF context */
- spf_init(sender_helo_name, sender_host_address);
+ /* set up SPF context */
+ spf_init(sender_helo_name, sender_host_address);
#endif
- /* Apply an ACL check if one is defined; afterwards, recheck
- synchronization in case the client started sending in a delay. */
+ /* Apply an ACL check if one is defined; afterwards, recheck
+ synchronization in case the client started sending in a delay. */
- if (acl_smtp_helo)
- if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
- &user_msg, &log_msg)) != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
- if (sender_helo_name)
+ if (acl_smtp_helo)
+ if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
+ &user_msg, &log_msg)) != OK)
{
- store_free(sender_helo_name);
- sender_helo_name = NULL;
+ done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
+ if (sender_helo_name)
+ {
+ store_free(sender_helo_name);
+ sender_helo_name = NULL;
+ }
+ host_build_sender_fullhost(); /* Rebuild */
+ break;
}
- host_build_sender_fullhost(); /* Rebuild */
- break;
- }
- else if (!check_sync()) goto SYNC_FAILURE;
+ else if (!check_sync()) goto SYNC_FAILURE;
- /* Generate an OK reply. The default string includes the ident if present,
- and also the IP address if present. Reflecting back the ident is intended
- as a deterrent to mail forgers. For maximum efficiency, and also because
- some broken systems expect each response to be in a single packet, arrange
- that the entire reply is sent in one write(). */
+ /* Generate an OK reply. The default string includes the ident if present,
+ and also the IP address if present. Reflecting back the ident is intended
+ as a deterrent to mail forgers. For maximum efficiency, and also because
+ some broken systems expect each response to be in a single packet, arrange
+ that the entire reply is sent in one write(). */
- auth_advertised = FALSE;
- smtp_in_pipelining_advertised = FALSE;
+ auth_advertised = FALSE;
+ smtp_in_pipelining_advertised = FALSE;
#ifdef SUPPORT_TLS
- tls_advertised = FALSE;
+ tls_advertised = FALSE;
# ifdef EXPERIMENTAL_REQUIRETLS
- requiretls_advertised = FALSE;
+ requiretls_advertised = FALSE;
# endif
#endif
- dsn_advertised = FALSE;
+ dsn_advertised = FALSE;
#ifdef SUPPORT_I18N
- smtputf8_advertised = FALSE;
+ smtputf8_advertised = FALSE;
#endif
- smtp_code = US"250 "; /* Default response code plus space*/
- if (!user_msg)
- {
- s = string_sprintf("%.3s %s Hello %s%s%s",
- smtp_code,
- smtp_active_hostname,
- sender_ident ? sender_ident : US"",
- sender_ident ? US" at " : US"",
- sender_host_name ? sender_host_name : sender_helo_name);
- g = string_cat(NULL, s);
-
- if (sender_host_address)
- {
- g = string_catn(g, US" [", 2);
- g = string_cat (g, sender_host_address);
- g = string_catn(g, US"]", 1);
- }
- }
+ smtp_code = US"250 "; /* Default response code plus space*/
+ if (!user_msg)
+ {
+ s = string_sprintf("%.3s %s Hello %s%s%s",
+ smtp_code,
+ smtp_active_hostname,
+ sender_ident ? sender_ident : US"",
+ sender_ident ? US" at " : US"",
+ sender_host_name ? sender_host_name : sender_helo_name);
+ g = string_cat(NULL, s);
+
+ if (sender_host_address)
+ {
+ g = string_catn(g, US" [", 2);
+ g = string_cat (g, sender_host_address);
+ g = string_catn(g, US"]", 1);
+ }
+ }
- /* A user-supplied EHLO greeting may not contain more than one line. Note
- that the code returned by smtp_message_code() includes the terminating
- whitespace character. */
+ /* A user-supplied EHLO greeting may not contain more than one line. Note
+ that the code returned by smtp_message_code() includes the terminating
+ whitespace character. */
- else
- {
- char *ss;
- int codelen = 4;
- smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
- s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
- if ((ss = strpbrk(CS s, "\r\n")) != NULL)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "EHLO/HELO response must not contain "
- "newlines: message truncated: %s", string_printing(s));
- *ss = 0;
- }
- g = string_cat(NULL, s);
- }
+ else
+ {
+ char *ss;
+ int codelen = 4;
+ smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
+ s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
+ if ((ss = strpbrk(CS s, "\r\n")) != NULL)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "EHLO/HELO response must not contain "
+ "newlines: message truncated: %s", string_printing(s));
+ *ss = 0;
+ }
+ g = string_cat(NULL, s);
+ }
- g = string_catn(g, US"\r\n", 2);
+ g = string_catn(g, US"\r\n", 2);
- /* If we received EHLO, we must create a multiline response which includes
- the functions supported. */
+ /* If we received EHLO, we must create a multiline response which includes
+ the functions supported. */
- if (esmtp)
- {
- g->s[3] = '-';
+ if (esmtp)
+ {
+ g->s[3] = '-';
- /* I'm not entirely happy with this, as an MTA is supposed to check
- that it has enough room to accept a message of maximum size before
- it sends this. However, there seems little point in not sending it.
- The actual size check happens later at MAIL FROM time. By postponing it
- till then, VRFY and EXPN can be used after EHLO when space is short. */
+ /* I'm not entirely happy with this, as an MTA is supposed to check
+ that it has enough room to accept a message of maximum size before
+ it sends this. However, there seems little point in not sending it.
+ The actual size check happens later at MAIL FROM time. By postponing it
+ till then, VRFY and EXPN can be used after EHLO when space is short. */
- if (thismessage_size_limit > 0)
- {
- sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
- thismessage_size_limit);
- g = string_cat(g, big_buffer);
- }
- else
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-SIZE\r\n", 7);
- }
+ if (thismessage_size_limit > 0)
+ {
+ sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
+ thismessage_size_limit);
+ g = string_cat(g, big_buffer);
+ }
+ else
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-SIZE\r\n", 7);
+ }
- /* Exim does not do protocol conversion or data conversion. It is 8-bit
- clean; if it has an 8-bit character in its hand, it just sends it. It
- cannot therefore specify 8BITMIME and remain consistent with the RFCs.
- However, some users want this option simply in order to stop MUAs
- mangling messages that contain top-bit-set characters. It is therefore
- provided as an option. */
+ /* Exim does not do protocol conversion or data conversion. It is 8-bit
+ clean; if it has an 8-bit character in its hand, it just sends it. It
+ cannot therefore specify 8BITMIME and remain consistent with the RFCs.
+ However, some users want this option simply in order to stop MUAs
+ mangling messages that contain top-bit-set characters. It is therefore
+ provided as an option. */
- if (accept_8bitmime)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-8BITMIME\r\n", 11);
- }
+ if (accept_8bitmime)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-8BITMIME\r\n", 11);
+ }
- /* Advertise DSN support if configured to do so. */
- if (verify_check_host(&dsn_advertise_hosts) != FAIL)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-DSN\r\n", 6);
- dsn_advertised = TRUE;
- }
+ /* Advertise DSN support if configured to do so. */
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-DSN\r\n", 6);
+ dsn_advertised = TRUE;
+ }
- /* Advertise ETRN/VRFY/EXPN if there's are ACL checking whether a host is
- permitted to issue them; a check is made when any host actually tries. */
+ /* Advertise ETRN/VRFY/EXPN if there's are ACL checking whether a host is
+ permitted to issue them; a check is made when any host actually tries. */
- if (acl_smtp_etrn)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-ETRN\r\n", 7);
- }
- if (acl_smtp_vrfy)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-VRFY\r\n", 7);
- }
- if (acl_smtp_expn)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-EXPN\r\n", 7);
- }
+ if (acl_smtp_etrn)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-ETRN\r\n", 7);
+ }
+ if (acl_smtp_vrfy)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-VRFY\r\n", 7);
+ }
+ if (acl_smtp_expn)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-EXPN\r\n", 7);
+ }
- /* Exim is quite happy with pipelining, so let the other end know that
- it is safe to use it, unless advertising is disabled. */
+ /* Exim is quite happy with pipelining, so let the other end know that
+ it is safe to use it, unless advertising is disabled. */
- if (pipelining_enable &&
- verify_check_host(&pipelining_advertise_hosts) == OK)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-PIPELINING\r\n", 13);
- sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
- smtp_in_pipelining_advertised = TRUE;
- }
+ if (pipelining_enable &&
+ verify_check_host(&pipelining_advertise_hosts) == OK)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-PIPELINING\r\n", 13);
+ sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
+ smtp_in_pipelining_advertised = TRUE;
+ }
- /* If any server authentication mechanisms are configured, advertise
- them if the current host is in auth_advertise_hosts. The problem with
- advertising always is that some clients then require users to
- authenticate (and aren't configurable otherwise) even though it may not
- be necessary (e.g. if the host is in host_accept_relay).
+ /* If any server authentication mechanisms are configured, advertise
+ them if the current host is in auth_advertise_hosts. The problem with
+ advertising always is that some clients then require users to
+ authenticate (and aren't configurable otherwise) even though it may not
+ be necessary (e.g. if the host is in host_accept_relay).
- RFC 2222 states that SASL mechanism names contain only upper case
- letters, so output the names in upper case, though we actually recognize
- them in either case in the AUTH command. */
+ RFC 2222 states that SASL mechanism names contain only upper case
+ letters, so output the names in upper case, though we actually recognize
+ them in either case in the AUTH command. */
- if ( auths
+ if ( auths
#ifdef AUTH_TLS
- && !sender_host_authenticated
+ && !sender_host_authenticated
#endif
- && verify_check_host(&auth_advertise_hosts) == OK
- )
- {
- auth_instance *au;
- BOOL first = TRUE;
- for (au = auths; au; au = au->next)
+ && verify_check_host(&auth_advertise_hosts) == OK
+ )
{
- au->advertised = FALSE;
- if (au->server)
+ auth_instance *au;
+ BOOL first = TRUE;
+ for (au = auths; au; au = au->next)
{
- DEBUG(D_auth+D_expand) debug_printf_indent(
- "Evaluating advertise_condition for %s athenticator\n",
- au->public_name);
- if ( !au->advertise_condition
- || expand_check_condition(au->advertise_condition, au->name,
- US"authenticator")
- )
+ au->advertised = FALSE;
+ if (au->server)
{
- int saveptr;
- if (first)
+ DEBUG(D_auth+D_expand) debug_printf_indent(
+ "Evaluating advertise_condition for %s athenticator\n",
+ au->public_name);
+ if ( !au->advertise_condition
+ || expand_check_condition(au->advertise_condition, au->name,
+ US"authenticator")
+ )
{
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-AUTH", 5);
- first = FALSE;
- auth_advertised = TRUE;
+ int saveptr;
+ if (first)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-AUTH", 5);
+ first = FALSE;
+ auth_advertised = TRUE;
+ }
+ saveptr = g->ptr;
+ g = string_catn(g, US" ", 1);
+ g = string_cat (g, au->public_name);
+ while (++saveptr < g->ptr) g->s[saveptr] = toupper(g->s[saveptr]);
+ au->advertised = TRUE;
}
- saveptr = g->ptr;
- g = string_catn(g, US" ", 1);
- g = string_cat (g, au->public_name);
- while (++saveptr < g->ptr) g->s[saveptr] = toupper(g->s[saveptr]);
- au->advertised = TRUE;
}
}
- }
- if (!first) g = string_catn(g, US"\r\n", 2);
- }
+ if (!first) g = string_catn(g, US"\r\n", 2);
+ }
- /* RFC 3030 CHUNKING */
+ /* RFC 3030 CHUNKING */
- if (verify_check_host(&chunking_advertise_hosts) != FAIL)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-CHUNKING\r\n", 11);
- chunking_offered = TRUE;
- chunking_state = CHUNKING_OFFERED;
- }
+ if (verify_check_host(&chunking_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-CHUNKING\r\n", 11);
+ chunking_offered = TRUE;
+ chunking_state = CHUNKING_OFFERED;
+ }
- /* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
- if it has been included in the binary, and the host matches
- tls_advertise_hosts. We must *not* advertise if we are already in a
- secure connection. */
+ /* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
+ if it has been included in the binary, and the host matches
+ tls_advertise_hosts. We must *not* advertise if we are already in a
+ secure connection. */
#ifdef SUPPORT_TLS
- if (tls_in.active.sock < 0 &&
- verify_check_host(&tls_advertise_hosts) != FAIL)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-STARTTLS\r\n", 11);
- tls_advertised = TRUE;
- }
+ if (tls_in.active.sock < 0 &&
+ verify_check_host(&tls_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-STARTTLS\r\n", 11);
+ tls_advertised = TRUE;
+ }
# ifdef EXPERIMENTAL_REQUIRETLS
- /* Advertise REQUIRETLS only once we are in a secure connection */
- if ( tls_in.active.sock >= 0
- && verify_check_host(&tls_advertise_requiretls) != FAIL)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-REQUIRETLS\r\n", 13);
- requiretls_advertised = TRUE;
- }
+ /* Advertise REQUIRETLS only once we are in a secure connection */
+ if ( tls_in.active.sock >= 0
+ && verify_check_host(&tls_advertise_requiretls) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-REQUIRETLS\r\n", 13);
+ requiretls_advertised = TRUE;
+ }
# endif
#endif
#ifndef DISABLE_PRDR
- /* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
- if (prdr_enable)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-PRDR\r\n", 7);
- }
+ /* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
+ if (prdr_enable)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-PRDR\r\n", 7);
+ }
#endif
#ifdef SUPPORT_I18N
- if ( accept_8bitmime
- && verify_check_host(&smtputf8_advertise_hosts) != FAIL)
- {
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US"-SMTPUTF8\r\n", 11);
- smtputf8_advertised = TRUE;
- }
+ if ( accept_8bitmime
+ && verify_check_host(&smtputf8_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-SMTPUTF8\r\n", 11);
+ smtputf8_advertised = TRUE;
+ }
#endif
- /* Finish off the multiline reply with one that is always available. */
+ /* Finish off the multiline reply with one that is always available. */
- g = string_catn(g, smtp_code, 3);
- g = string_catn(g, US" HELP\r\n", 7);
- }
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US" HELP\r\n", 7);
+ }
- /* Terminate the string (for debug), write it, and note that HELO/EHLO
- has been seen. */
+ /* Terminate the string (for debug), write it, and note that HELO/EHLO
+ has been seen. */
#ifdef SUPPORT_TLS
- if (tls_in.active.sock >= 0) (void)tls_write(NULL, g->s, g->ptr, FALSE); else
+ if (tls_in.active.sock >= 0) (void)tls_write(NULL, g->s, g->ptr, FALSE); else
#endif
- {
- int i = fwrite(g->s, 1, g->ptr, smtp_out); i = i; /* compiler quietening */
- }
- DEBUG(D_receive)
- {
- uschar *cr;
+ {
+ int i = fwrite(g->s, 1, g->ptr, smtp_out); i = i; /* compiler quietening */
+ }
+ DEBUG(D_receive)
+ {
+ uschar *cr;
- (void) string_from_gstring(g);
- while ((cr = Ustrchr(g->s, '\r')) != NULL) /* lose CRs */
- memmove(cr, cr + 1, (g->ptr--) - (cr - g->s));
- debug_printf("SMTP>> %s", g->s);
- }
- helo_seen = TRUE;
+ (void) string_from_gstring(g);
+ while ((cr = Ustrchr(g->s, '\r')) != NULL) /* lose CRs */
+ memmove(cr, cr + 1, (g->ptr--) - (cr - g->s));
+ debug_printf("SMTP>> %s", g->s);
+ }
+ helo_seen = TRUE;
- /* Reset the protocol and the state, abandoning any previous message. */
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [ (esmtp
- ? pextend + (sender_host_authenticated ? pauthed : 0)
- : pnormal)
- + (tls_in.active.sock >= 0 ? pcrpted : 0)
- ];
- cancel_cutthrough_connection(TRUE, US"sent EHLO response");
- smtp_reset(reset_point);
- toomany = FALSE;
- break; /* HELO/EHLO */
+ /* Reset the protocol and the state, abandoning any previous message. */
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active.sock >= 0 ? pcrpted : 0)
+ ];
+ cancel_cutthrough_connection(TRUE, US"sent EHLO response");
+ smtp_reset(reset_point);
+ toomany = FALSE;
+ break; /* HELO/EHLO */
/* The MAIL command requires an address as an operand. All we do
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
- HAD(SCH_MAIL);
- smtp_mailcmd_count++; /* Count for limit and ratelimit */
- was_rej_mail = TRUE; /* Reset if accepted */
- env_mail_type_t * mail_args; /* Sanity check & validate args */
-
- if (helo_required && !helo_seen)
- {
- smtp_printf("503 HELO or EHLO required\r\n", FALSE);
- log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL from %s: no "
- "HELO/EHLO given", host_and_ident(FALSE));
- break;
- }
+ HAD(SCH_MAIL);
+ smtp_mailcmd_count++; /* Count for limit and ratelimit */
+ was_rej_mail = TRUE; /* Reset if accepted */
+ env_mail_type_t * mail_args; /* Sanity check & validate args */
- if (sender_address)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"sender already given");
- break;
- }
+ if (helo_required && !helo_seen)
+ {
+ smtp_printf("503 HELO or EHLO required\r\n", FALSE);
+ log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL from %s: no "
+ "HELO/EHLO given", host_and_ident(FALSE));
+ break;
+ }
- if (!*smtp_cmd_data)
- {
- done = synprot_error(L_smtp_protocol_error, 501, NULL,
- US"MAIL must have an address operand");
- break;
- }
+ if (sender_address)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"sender already given");
+ break;
+ }
- /* Check to see if the limit for messages per connection would be
- exceeded by accepting further messages. */
+ if (!*smtp_cmd_data)
+ {
+ done = synprot_error(L_smtp_protocol_error, 501, NULL,
+ US"MAIL must have an address operand");
+ break;
+ }
- if (smtp_accept_max_per_connection > 0 &&
- smtp_mailcmd_count > smtp_accept_max_per_connection)
- {
- smtp_printf("421 too many messages in this connection\r\n", FALSE);
- log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL command %s: too many "
- "messages in one connection", host_and_ident(TRUE));
- break;
- }
+ /* Check to see if the limit for messages per connection would be
+ exceeded by accepting further messages. */
- /* Reset for start of message - even if this is going to fail, we
- obviously need to throw away any previous data. */
+ if (smtp_accept_max_per_connection > 0 &&
+ smtp_mailcmd_count > smtp_accept_max_per_connection)
+ {
+ smtp_printf("421 too many messages in this connection\r\n", FALSE);
+ log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL command %s: too many "
+ "messages in one connection", host_and_ident(TRUE));
+ break;
+ }
- cancel_cutthrough_connection(TRUE, US"MAIL received");
- smtp_reset(reset_point);
- toomany = FALSE;
- sender_data = recipient_data = NULL;
+ /* Reset for start of message - even if this is going to fail, we
+ obviously need to throw away any previous data. */
- /* Loop, checking for ESMTP additions to the MAIL FROM command. */
+ cancel_cutthrough_connection(TRUE, US"MAIL received");
+ smtp_reset(reset_point);
+ toomany = FALSE;
+ sender_data = recipient_data = NULL;
- if (esmtp) for(;;)
- {
- uschar *name, *value, *end;
- unsigned long int size;
- BOOL arg_error = FALSE;
+ /* Loop, checking for ESMTP additions to the MAIL FROM command. */
- if (!extract_option(&name, &value)) break;
+ if (esmtp) for(;;)
+ {
+ uschar *name, *value, *end;
+ unsigned long int size;
+ BOOL arg_error = FALSE;
- for (mail_args = env_mail_type_list;
- mail_args->value != ENV_MAIL_OPT_NULL;
- mail_args++
- )
- if (strcmpic(name, mail_args->name) == 0)
- break;
- if (mail_args->need_value && strcmpic(value, US"") == 0)
- break;
+ if (!extract_option(&name, &value)) break;
- switch(mail_args->value)
- {
- /* Handle SIZE= by reading the value. We don't do the check till later,
- in order to be able to log the sender address on failure. */
- case ENV_MAIL_OPT_SIZE:
- if (((size = Ustrtoul(value, &end, 10)), *end == 0))
- {
- if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
- size = INT_MAX;
- message_size = (int)size;
- }
- else
- arg_error = TRUE;
- break;
+ for (mail_args = env_mail_type_list;
+ mail_args->value != ENV_MAIL_OPT_NULL;
+ mail_args++
+ )
+ if (strcmpic(name, mail_args->name) == 0)
+ break;
+ if (mail_args->need_value && strcmpic(value, US"") == 0)
+ break;
- /* If this session was initiated with EHLO and accept_8bitmime is set,
- Exim will have indicated that it supports the BODY=8BITMIME option. In
- fact, it does not support this according to the RFCs, in that it does not
- take any special action for forwarding messages containing 8-bit
- characters. That is why accept_8bitmime is not the default setting, but
- some sites want the action that is provided. We recognize both "8BITMIME"
- and "7BIT" as body types, but take no action. */
- case ENV_MAIL_OPT_BODY:
- if (accept_8bitmime) {
- if (strcmpic(value, US"8BITMIME") == 0)
- body_8bitmime = 8;
- else if (strcmpic(value, US"7BIT") == 0)
- body_8bitmime = 7;
- else
+ switch(mail_args->value)
+ {
+ /* Handle SIZE= by reading the value. We don't do the check till later,
+ in order to be able to log the sender address on failure. */
+ case ENV_MAIL_OPT_SIZE:
+ if (((size = Ustrtoul(value, &end, 10)), *end == 0))
{
- body_8bitmime = 0;
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid data for BODY");
- goto COMMAND_LOOP;
- }
- DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
+ if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
+ size = INT_MAX;
+ message_size = (int)size;
+ }
+ else
+ arg_error = TRUE;
+ break;
+
+ /* If this session was initiated with EHLO and accept_8bitmime is set,
+ Exim will have indicated that it supports the BODY=8BITMIME option. In
+ fact, it does not support this according to the RFCs, in that it does not
+ take any special action for forwarding messages containing 8-bit
+ characters. That is why accept_8bitmime is not the default setting, but
+ some sites want the action that is provided. We recognize both "8BITMIME"
+ and "7BIT" as body types, but take no action. */
+ case ENV_MAIL_OPT_BODY:
+ if (accept_8bitmime) {
+ if (strcmpic(value, US"8BITMIME") == 0)
+ body_8bitmime = 8;
+ else if (strcmpic(value, US"7BIT") == 0)
+ body_8bitmime = 7;
+ else
+ {
+ body_8bitmime = 0;
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for BODY");
+ goto COMMAND_LOOP;
+ }
+ DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
+ break;
+ }
+ arg_error = TRUE;
break;
- }
- arg_error = TRUE;
- break;
- /* Handle the two DSN options, but only if configured to do so (which
- will have caused "DSN" to be given in the EHLO response). The code itself
- is included only if configured in at build time. */
+ /* Handle the two DSN options, but only if configured to do so (which
+ will have caused "DSN" to be given in the EHLO response). The code itself
+ is included only if configured in at build time. */
- case ENV_MAIL_OPT_RET:
- if (dsn_advertised)
- {
- /* Check if RET has already been set */
- if (dsn_ret > 0)
+ case ENV_MAIL_OPT_RET:
+ if (dsn_advertised)
{
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"RET can be specified once only");
- goto COMMAND_LOOP;
+ /* Check if RET has already been set */
+ if (dsn_ret > 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"RET can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ dsn_ret = strcmpic(value, US"HDRS") == 0
+ ? dsn_ret_hdrs
+ : strcmpic(value, US"FULL") == 0
+ ? dsn_ret_full
+ : 0;
+ DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
+ /* Check for invalid invalid value, and exit with error */
+ if (dsn_ret == 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Value for RET is invalid");
+ goto COMMAND_LOOP;
+ }
}
- dsn_ret = strcmpic(value, US"HDRS") == 0
- ? dsn_ret_hdrs
- : strcmpic(value, US"FULL") == 0
- ? dsn_ret_full
- : 0;
- DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
- /* Check for invalid invalid value, and exit with error */
- if (dsn_ret == 0)
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"Value for RET is invalid");
- goto COMMAND_LOOP;
- }
- }
- break;
- case ENV_MAIL_OPT_ENVID:
- if (dsn_advertised)
- {
- /* Check if the dsn envid has been already set */
- if (dsn_envid)
+ break;
+ case ENV_MAIL_OPT_ENVID:
+ if (dsn_advertised)
{
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"ENVID can be specified once only");
- goto COMMAND_LOOP;
+ /* Check if the dsn envid has been already set */
+ if (dsn_envid)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ENVID can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ dsn_envid = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
}
- dsn_envid = string_copy(value);
- DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
- }
- break;
-
- /* Handle the AUTH extension. If the value given is not "<>" and either
- the ACL says "yes" or there is no ACL but the sending host is
- authenticated, we set it up as the authenticated sender. However, if the
- authenticator set a condition to be tested, we ignore AUTH on MAIL unless
- the condition is met. The value of AUTH is an xtext, which means that +,
- = and cntrl chars are coded in hex; however "<>" is unaffected by this
- coding. */
- case ENV_MAIL_OPT_AUTH:
- if (Ustrcmp(value, "<>") != 0)
- {
- int rc;
- uschar *ignore_msg;
+ break;
- if (auth_xtextdecode(value, &authenticated_sender) < 0)
- {
- /* Put back terminator overrides for error message */
- value[-1] = '=';
- name[-1] = ' ';
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid data for AUTH");
- goto COMMAND_LOOP;
- }
- if (!acl_smtp_mailauth)
- {
- ignore_msg = US"client not authenticated";
- rc = sender_host_authenticated ? OK : FAIL;
- }
- else
- {
- ignore_msg = US"rejected by ACL";
- rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
- &user_msg, &log_msg);
- }
+ /* Handle the AUTH extension. If the value given is not "<>" and either
+ the ACL says "yes" or there is no ACL but the sending host is
+ authenticated, we set it up as the authenticated sender. However, if the
+ authenticator set a condition to be tested, we ignore AUTH on MAIL unless
+ the condition is met. The value of AUTH is an xtext, which means that +,
+ = and cntrl chars are coded in hex; however "<>" is unaffected by this
+ coding. */
+ case ENV_MAIL_OPT_AUTH:
+ if (Ustrcmp(value, "<>") != 0)
+ {
+ int rc;
+ uschar *ignore_msg;
- switch (rc)
- {
- case OK:
- if (authenticated_by == NULL ||
- authenticated_by->mail_auth_condition == NULL ||
- expand_check_condition(authenticated_by->mail_auth_condition,
- authenticated_by->name, US"authenticator"))
- break; /* Accept the AUTH */
-
- ignore_msg = US"server_mail_auth_condition failed";
- if (authenticated_id != NULL)
- ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
- ignore_msg, authenticated_id);
-
- /* Fall through */
-
- case FAIL:
- authenticated_sender = NULL;
- log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
- value, host_and_ident(TRUE), ignore_msg);
- break;
-
- /* Should only get DEFER or ERROR here. Put back terminator
- overrides for error message */
-
- default:
+ if (auth_xtextdecode(value, &authenticated_sender) < 0)
+ {
+ /* Put back terminator overrides for error message */
value[-1] = '=';
name[-1] = ' ';
- (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
- log_msg);
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for AUTH");
goto COMMAND_LOOP;
- }
- }
- break;
+ }
+ if (!acl_smtp_mailauth)
+ {
+ ignore_msg = US"client not authenticated";
+ rc = sender_host_authenticated ? OK : FAIL;
+ }
+ else
+ {
+ ignore_msg = US"rejected by ACL";
+ rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
+ &user_msg, &log_msg);
+ }
+
+ switch (rc)
+ {
+ case OK:
+ if (authenticated_by == NULL ||
+ authenticated_by->mail_auth_condition == NULL ||
+ expand_check_condition(authenticated_by->mail_auth_condition,
+ authenticated_by->name, US"authenticator"))
+ break; /* Accept the AUTH */
+
+ ignore_msg = US"server_mail_auth_condition failed";
+ if (authenticated_id != NULL)
+ ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
+ ignore_msg, authenticated_id);
+
+ /* Fall through */
+
+ case FAIL:
+ authenticated_sender = NULL;
+ log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
+ value, host_and_ident(TRUE), ignore_msg);
+ break;
+
+ /* Should only get DEFER or ERROR here. Put back terminator
+ overrides for error message */
+
+ default:
+ value[-1] = '=';
+ name[-1] = ' ';
+ (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
+ log_msg);
+ goto COMMAND_LOOP;
+ }
+ }
+ break;
#ifndef DISABLE_PRDR
- case ENV_MAIL_OPT_PRDR:
- if (prdr_enable)
- prdr_requested = TRUE;
- break;
+ case ENV_MAIL_OPT_PRDR:
+ if (prdr_enable)
+ prdr_requested = TRUE;
+ break;
#endif
#ifdef SUPPORT_I18N
- case ENV_MAIL_OPT_UTF8:
- if (!smtputf8_advertised)
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"SMTPUTF8 used when not advertised");
- goto COMMAND_LOOP;
- }
+ case ENV_MAIL_OPT_UTF8:
+ if (!smtputf8_advertised)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"SMTPUTF8 used when not advertised");
+ goto COMMAND_LOOP;
+ }
- DEBUG(D_receive) debug_printf("smtputf8 requested\n");
- message_smtputf8 = allow_utf8_domains = TRUE;
- if (Ustrncmp(received_protocol, US"utf8", 4) != 0)
- {
- int old_pool = store_pool;
- store_pool = POOL_PERM;
- received_protocol = string_sprintf("utf8%s", received_protocol);
- store_pool = old_pool;
- }
- break;
+ DEBUG(D_receive) debug_printf("smtputf8 requested\n");
+ message_smtputf8 = allow_utf8_domains = TRUE;
+ if (Ustrncmp(received_protocol, US"utf8", 4) != 0)
+ {
+ int old_pool = store_pool;
+ store_pool = POOL_PERM;
+ received_protocol = string_sprintf("utf8%s", received_protocol);
+ store_pool = old_pool;
+ }
+ break;
#endif
#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
- case ENV_MAIL_OPT_REQTLS:
- {
- const uschar * list = value;
- int sep = ',';
- const uschar * opt;
- uschar * r, * t;
-
- if (!requiretls_advertised)
+ case ENV_MAIL_OPT_REQTLS:
{
- done = synprot_error(L_smtp_syntax_error, 555, NULL,
- US"unadvertised MAIL option: REQUIRETLS");
- goto COMMAND_LOOP;
- }
+ const uschar * list = value;
+ int sep = ',';
+ const uschar * opt;
+ uschar * r, * t;
+
+ if (!requiretls_advertised)
+ {
+ done = synprot_error(L_smtp_syntax_error, 555, NULL,
+ US"unadvertised MAIL option: REQUIRETLS");
+ goto COMMAND_LOOP;
+ }
- DEBUG(D_receive) debug_printf("requiretls requested\n");
- tls_requiretls = REQUIRETLS_MSG;
+ DEBUG(D_receive) debug_printf("requiretls requested\n");
+ tls_requiretls = REQUIRETLS_MSG;
- r = string_copy_malloc(received_protocol);
- if ((t = Ustrrchr(r, 's'))) *t = 'S';
- received_protocol = r;
- }
- break;
+ r = string_copy_malloc(received_protocol);
+ if ((t = Ustrrchr(r, 's'))) *t = 'S';
+ received_protocol = r;
+ }
+ break;
#endif
- /* No valid option. Stick back the terminator characters and break
- the loop. Do the name-terminator second as extract_option sets
- value==name when it found no equal-sign.
- An error for a malformed address will occur. */
- case ENV_MAIL_OPT_NULL:
- value[-1] = '=';
- name[-1] = ' ';
- arg_error = TRUE;
- break;
+ /* No valid option. Stick back the terminator characters and break
+ the loop. Do the name-terminator second as extract_option sets
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
+ case ENV_MAIL_OPT_NULL:
+ value[-1] = '=';
+ name[-1] = ' ';
+ arg_error = TRUE;
+ break;
- default: assert(0);
- }
- /* Break out of for loop if switch() had bad argument or
- when start of the email address is reached */
- if (arg_error) break;
- }
+ default: assert(0);
+ }
+ /* Break out of for loop if switch() had bad argument or
+ when start of the email address is reached */
+ if (arg_error) break;
+ }
#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
- if (tls_requiretls & REQUIRETLS_MSG)
- {
- /* Ensure headers-only bounces whether a RET option was given or not. */
+ if (tls_requiretls & REQUIRETLS_MSG)
+ {
+ /* Ensure headers-only bounces whether a RET option was given or not. */
- DEBUG(D_receive) if (dsn_ret == dsn_ret_full)
- debug_printf("requiretls override: dsn_ret_full -> dsn_ret_hdrs\n");
- dsn_ret = dsn_ret_hdrs;
- }
+ DEBUG(D_receive) if (dsn_ret == dsn_ret_full)
+ debug_printf("requiretls override: dsn_ret_full -> dsn_ret_hdrs\n");
+ dsn_ret = dsn_ret_hdrs;
+ }
#endif
- /* If we have passed the threshold for rate limiting, apply the current
- delay, and update it for next time, provided this is a limited host. */
+ /* If we have passed the threshold for rate limiting, apply the current
+ delay, and update it for next time, provided this is a limited host. */
- if (smtp_mailcmd_count > smtp_rlm_threshold &&
- verify_check_host(&smtp_ratelimit_hosts) == OK)
- {
- DEBUG(D_receive) debug_printf("rate limit MAIL: delay %.3g sec\n",
- smtp_delay_mail/1000.0);
- millisleep((int)smtp_delay_mail);
- smtp_delay_mail *= smtp_rlm_factor;
- if (smtp_delay_mail > (double)smtp_rlm_limit)
- smtp_delay_mail = (double)smtp_rlm_limit;
- }
-
- /* Now extract the address, first applying any SMTP-time rewriting. The
- TRUE flag allows "<>" as a sender address. */
+ if (smtp_mailcmd_count > smtp_rlm_threshold &&
+ verify_check_host(&smtp_ratelimit_hosts) == OK)
+ {
+ DEBUG(D_receive) debug_printf("rate limit MAIL: delay %.3g sec\n",
+ smtp_delay_mail/1000.0);
+ millisleep((int)smtp_delay_mail);
+ smtp_delay_mail *= smtp_rlm_factor;
+ if (smtp_delay_mail > (double)smtp_rlm_limit)
+ smtp_delay_mail = (double)smtp_rlm_limit;
+ }
- raw_sender = rewrite_existflags & rewrite_smtp
- ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules)
- : smtp_cmd_data;
+ /* Now extract the address, first applying any SMTP-time rewriting. The
+ TRUE flag allows "<>" as a sender address. */
- raw_sender =
- parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
- TRUE);
+ raw_sender = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- if (!raw_sender)
- {
- done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
- break;
- }
+ raw_sender =
+ parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
+ TRUE);
- sender_address = raw_sender;
+ if (!raw_sender)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
+ break;
+ }
- /* If there is a configured size limit for mail, check that this message
- doesn't exceed it. The check is postponed to this point so that the sender
- can be logged. */
+ sender_address = raw_sender;
- if (thismessage_size_limit > 0 && message_size > thismessage_size_limit)
- {
- smtp_printf("552 Message size exceeds maximum permitted\r\n", FALSE);
- log_write(L_size_reject,
- LOG_MAIN|LOG_REJECT, "rejected MAIL FROM:<%s> %s: "
- "message too big: size%s=%d max=%d",
- sender_address,
- host_and_ident(TRUE),
- (message_size == INT_MAX)? ">" : "",
- message_size,
- thismessage_size_limit);
- sender_address = NULL;
- break;
- }
+ /* If there is a configured size limit for mail, check that this message
+ doesn't exceed it. The check is postponed to this point so that the sender
+ can be logged. */
- /* Check there is enough space on the disk unless configured not to.
- When smtp_check_spool_space is set, the check is for thismessage_size_limit
- plus the current message - i.e. we accept the message only if it won't
- reduce the space below the threshold. Add 5000 to the size to allow for
- overheads such as the Received: line and storing of recipients, etc.
- By putting the check here, even when SIZE is not given, it allow VRFY
- and EXPN etc. to be used when space is short. */
-
- if (!receive_check_fs(
- (smtp_check_spool_space && message_size >= 0)?
- message_size + 5000 : 0))
- {
- smtp_printf("452 Space shortage, please try later\r\n", FALSE);
- sender_address = NULL;
- break;
- }
+ if (thismessage_size_limit > 0 && message_size > thismessage_size_limit)
+ {
+ smtp_printf("552 Message size exceeds maximum permitted\r\n", FALSE);
+ log_write(L_size_reject,
+ LOG_MAIN|LOG_REJECT, "rejected MAIL FROM:<%s> %s: "
+ "message too big: size%s=%d max=%d",
+ sender_address,
+ host_and_ident(TRUE),
+ (message_size == INT_MAX)? ">" : "",
+ message_size,
+ thismessage_size_limit);
+ sender_address = NULL;
+ break;
+ }
- /* If sender_address is unqualified, reject it, unless this is a locally
- generated message, or the sending host or net is permitted to send
- unqualified addresses - typically local machines behaving as MUAs -
- in which case just qualify the address. The flag is set above at the start
- of the SMTP connection. */
+ /* Check there is enough space on the disk unless configured not to.
+ When smtp_check_spool_space is set, the check is for thismessage_size_limit
+ plus the current message - i.e. we accept the message only if it won't
+ reduce the space below the threshold. Add 5000 to the size to allow for
+ overheads such as the Received: line and storing of recipients, etc.
+ By putting the check here, even when SIZE is not given, it allow VRFY
+ and EXPN etc. to be used when space is short. */
+
+ if (!receive_check_fs(
+ (smtp_check_spool_space && message_size >= 0)?
+ message_size + 5000 : 0))
+ {
+ smtp_printf("452 Space shortage, please try later\r\n", FALSE);
+ sender_address = NULL;
+ break;
+ }
- if (!sender_domain && *sender_address)
- if (allow_unqualified_sender)
- {
- sender_domain = Ustrlen(sender_address) + 1;
- sender_address = rewrite_address_qualify(sender_address, FALSE);
- DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
- raw_sender);
- }
- else
- {
- smtp_printf("501 %s: sender address must contain a domain\r\n", FALSE,
- smtp_cmd_data);
- log_write(L_smtp_syntax_error,
- LOG_MAIN|LOG_REJECT,
- "unqualified sender rejected: <%s> %s%s",
- raw_sender,
- host_and_ident(TRUE),
- host_lookup_msg);
- sender_address = NULL;
- break;
- }
+ /* If sender_address is unqualified, reject it, unless this is a locally
+ generated message, or the sending host or net is permitted to send
+ unqualified addresses - typically local machines behaving as MUAs -
+ in which case just qualify the address. The flag is set above at the start
+ of the SMTP connection. */
- /* Apply an ACL check if one is defined, before responding. Afterwards,
- when pipelining is not advertised, do another sync check in case the ACL
- delayed and the client started sending in the meantime. */
+ if (!sender_domain && *sender_address)
+ if (allow_unqualified_sender)
+ {
+ sender_domain = Ustrlen(sender_address) + 1;
+ sender_address = rewrite_address_qualify(sender_address, FALSE);
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
+ raw_sender);
+ }
+ else
+ {
+ smtp_printf("501 %s: sender address must contain a domain\r\n", FALSE,
+ smtp_cmd_data);
+ log_write(L_smtp_syntax_error,
+ LOG_MAIN|LOG_REJECT,
+ "unqualified sender rejected: <%s> %s%s",
+ raw_sender,
+ host_and_ident(TRUE),
+ host_lookup_msg);
+ sender_address = NULL;
+ break;
+ }
- if (acl_smtp_mail)
- {
- rc = acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
- if (rc == OK && !smtp_in_pipelining_advertised && !check_sync())
- goto SYNC_FAILURE;
- }
- else
- rc = OK;
+ /* Apply an ACL check if one is defined, before responding. Afterwards,
+ when pipelining is not advertised, do another sync check in case the ACL
+ delayed and the client started sending in the meantime. */
- if (rc == OK || rc == DISCARD)
- {
- BOOL more = pipeline_response();
+ if (acl_smtp_mail)
+ {
+ rc = acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
+ if (rc == OK && !smtp_in_pipelining_advertised && !check_sync())
+ goto SYNC_FAILURE;
+ }
+ else
+ rc = OK;
- if (!user_msg)
- smtp_printf("%s%s%s", more, US"250 OK",
- #ifndef DISABLE_PRDR
- prdr_requested ? US", PRDR Requested" : US"",
- #else
- US"",
- #endif
- US"\r\n");
+ if (rc == OK || rc == DISCARD)
+ {
+ BOOL more = pipeline_response();
+
+ if (!user_msg)
+ smtp_printf("%s%s%s", more, US"250 OK",
+ #ifndef DISABLE_PRDR
+ prdr_requested ? US", PRDR Requested" : US"",
+ #else
+ US"",
+ #endif
+ US"\r\n");
+ else
+ {
+ #ifndef DISABLE_PRDR
+ if (prdr_requested)
+ user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
+ #endif
+ smtp_user_msg(US"250", user_msg);
+ }
+ smtp_delay_rcpt = smtp_rlr_base;
+ recipients_discarded = (rc == DISCARD);
+ was_rej_mail = FALSE;
+ }
else
- {
- #ifndef DISABLE_PRDR
- if (prdr_requested)
- user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
- #endif
- smtp_user_msg(US"250", user_msg);
- }
- smtp_delay_rcpt = smtp_rlr_base;
- recipients_discarded = (rc == DISCARD);
- was_rej_mail = FALSE;
- }
- else
- {
- done = smtp_handle_acl_fail(ACL_WHERE_MAIL, rc, user_msg, log_msg);
- sender_address = NULL;
- }
- break;
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_MAIL, rc, user_msg, log_msg);
+ sender_address = NULL;
+ }
+ break;
/* The RCPT command requires an address as an operand. There may be any
are not used, as we keep only the extracted address. */
case RCPT_CMD:
- HAD(SCH_RCPT);
- rcpt_count++;
- was_rcpt = rcpt_in_progress = TRUE;
+ HAD(SCH_RCPT);
+ rcpt_count++;
+ was_rcpt = rcpt_in_progress = TRUE;
- /* There must be a sender address; if the sender was rejected and
- pipelining was advertised, we assume the client was pipelining, and do not
- count this as a protocol error. Reset was_rej_mail so that further RCPTs
- get the same treatment. */
+ /* There must be a sender address; if the sender was rejected and
+ pipelining was advertised, we assume the client was pipelining, and do not
+ count this as a protocol error. Reset was_rej_mail so that further RCPTs
+ get the same treatment. */
- if (sender_address == NULL)
- {
- if (smtp_in_pipelining_advertised && last_was_rej_mail)
- {
- smtp_printf("503 sender not yet given\r\n", FALSE);
- was_rej_mail = TRUE;
- }
- else
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"sender not yet given");
- was_rcpt = FALSE; /* Not a valid RCPT */
- }
- rcpt_fail_count++;
- break;
- }
+ if (sender_address == NULL)
+ {
+ if (smtp_in_pipelining_advertised && last_was_rej_mail)
+ {
+ smtp_printf("503 sender not yet given\r\n", FALSE);
+ was_rej_mail = TRUE;
+ }
+ else
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"sender not yet given");
+ was_rcpt = FALSE; /* Not a valid RCPT */
+ }
+ rcpt_fail_count++;
+ break;
+ }
- /* Check for an operand */
+ /* Check for an operand */
- if (smtp_cmd_data[0] == 0)
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"RCPT must have an address operand");
- rcpt_fail_count++;
- break;
- }
+ if (smtp_cmd_data[0] == 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"RCPT must have an address operand");
+ rcpt_fail_count++;
+ break;
+ }
- /* Set the DSN flags orcpt and dsn_flags from the session*/
- orcpt = NULL;
- flags = 0;
+ /* Set the DSN flags orcpt and dsn_flags from the session*/
+ orcpt = NULL;
+ flags = 0;
- if (esmtp) for(;;)
- {
- uschar *name, *value;
+ if (esmtp) for(;;)
+ {
+ uschar *name, *value;
- if (!extract_option(&name, &value))
- break;
+ if (!extract_option(&name, &value))
+ break;
- if (dsn_advertised && strcmpic(name, US"ORCPT") == 0)
- {
- /* Check whether orcpt has been already set */
- if (orcpt)
+ if (dsn_advertised && strcmpic(name, US"ORCPT") == 0)
{
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"ORCPT can be specified once only");
- goto COMMAND_LOOP;
- }
- orcpt = string_copy(value);
- DEBUG(D_receive) debug_printf("DSN orcpt: %s\n", orcpt);
- }
+ /* Check whether orcpt has been already set */
+ if (orcpt)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ORCPT can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ orcpt = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN orcpt: %s\n", orcpt);
+ }
- else if (dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
- {
- /* Check if the notify flags have been already set */
- if (flags > 0)
+ else if (dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
{
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"NOTIFY can be specified once only");
- goto COMMAND_LOOP;
- }
- if (strcmpic(value, US"NEVER") == 0)
- flags |= rf_notify_never;
- else
- {
- uschar *p = value;
- while (*p != 0)
- {
- uschar *pp = p;
- while (*pp != 0 && *pp != ',') pp++;
- if (*pp == ',') *pp++ = 0;
- if (strcmpic(p, US"SUCCESS") == 0)
- {
- DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
- flags |= rf_notify_success;
- }
- else if (strcmpic(p, US"FAILURE") == 0)
- {
- DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
- flags |= rf_notify_failure;
- }
- else if (strcmpic(p, US"DELAY") == 0)
- {
- DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
- flags |= rf_notify_delay;
- }
- else
+ /* Check if the notify flags have been already set */
+ if (flags > 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"NOTIFY can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ if (strcmpic(value, US"NEVER") == 0)
+ flags |= rf_notify_never;
+ else
+ {
+ uschar *p = value;
+ while (*p != 0)
{
- /* Catch any strange values */
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"Invalid value for NOTIFY parameter");
- goto COMMAND_LOOP;
- }
- p = pp;
- }
- DEBUG(D_receive) debug_printf("DSN Flags: %x\n", flags);
- }
- }
+ uschar *pp = p;
+ while (*pp != 0 && *pp != ',') pp++;
+ if (*pp == ',') *pp++ = 0;
+ if (strcmpic(p, US"SUCCESS") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
+ flags |= rf_notify_success;
+ }
+ else if (strcmpic(p, US"FAILURE") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
+ flags |= rf_notify_failure;
+ }
+ else if (strcmpic(p, US"DELAY") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
+ flags |= rf_notify_delay;
+ }
+ else
+ {
+ /* Catch any strange values */
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Invalid value for NOTIFY parameter");
+ goto COMMAND_LOOP;
+ }
+ p = pp;
+ }
+ DEBUG(D_receive) debug_printf("DSN Flags: %x\n", flags);
+ }
+ }
- /* Unknown option. Stick back the terminator characters and break
- the loop. An error for a malformed address will occur. */
+ /* Unknown option. Stick back the terminator characters and break
+ the loop. An error for a malformed address will occur. */
- else
- {
- DEBUG(D_receive) debug_printf("Invalid RCPT option: %s : %s\n", name, value);
- name[-1] = ' ';
- value[-1] = '=';
- break;
- }
- }
+ else
+ {
+ DEBUG(D_receive) debug_printf("Invalid RCPT option: %s : %s\n", name, value);
+ name[-1] = ' ';
+ value[-1] = '=';
+ break;
+ }
+ }
- /* Apply SMTP rewriting then extract the working address. Don't allow "<>"
- as a recipient address */
+ /* Apply SMTP rewriting then extract the working address. Don't allow "<>"
+ as a recipient address */
- recipient = rewrite_existflags & rewrite_smtp
- ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules)
- : smtp_cmd_data;
+ recipient = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- if (!(recipient = parse_extract_address(recipient, &errmess, &start, &end,
- &recipient_domain, FALSE)))
- {
- done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
- rcpt_fail_count++;
- break;
- }
+ if (!(recipient = parse_extract_address(recipient, &errmess, &start, &end,
+ &recipient_domain, FALSE)))
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
+ rcpt_fail_count++;
+ break;
+ }
- /* If the recipient address is unqualified, reject it, unless this is a
- locally generated message. However, unqualified addresses are permitted
- from a configured list of hosts and nets - typically when behaving as
- MUAs rather than MTAs. Sad that SMTP is used for both types of traffic,
- really. The flag is set at the start of the SMTP connection.
+ /* If the recipient address is unqualified, reject it, unless this is a
+ locally generated message. However, unqualified addresses are permitted
+ from a configured list of hosts and nets - typically when behaving as
+ MUAs rather than MTAs. Sad that SMTP is used for both types of traffic,
+ really. The flag is set at the start of the SMTP connection.
- RFC 1123 talks about supporting "the reserved mailbox postmaster"; I always
- assumed this meant "reserved local part", but the revision of RFC 821 and
- friends now makes it absolutely clear that it means *mailbox*. Consequently
- we must always qualify this address, regardless. */
+ RFC 1123 talks about supporting "the reserved mailbox postmaster"; I always
+ assumed this meant "reserved local part", but the revision of RFC 821 and
+ friends now makes it absolutely clear that it means *mailbox*. Consequently
+ we must always qualify this address, regardless. */
- if (!recipient_domain)
- if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
- US"recipient")))
- {
- rcpt_fail_count++;
- break;
- }
+ if (!recipient_domain)
+ if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
+ US"recipient")))
+ {
+ rcpt_fail_count++;
+ break;
+ }
- /* Check maximum allowed */
+ /* Check maximum allowed */
- if (rcpt_count > recipients_max && recipients_max > 0)
- {
- if (recipients_max_reject)
- {
- rcpt_fail_count++;
- smtp_printf("552 too many recipients\r\n", FALSE);
- if (!toomany)
- log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: message "
- "rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE));
- }
- else
- {
- rcpt_defer_count++;
- smtp_printf("452 too many recipients\r\n", FALSE);
- if (!toomany)
- log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: excess "
- "temporarily rejected: sender=<%s> %s", sender_address,
- host_and_ident(TRUE));
- }
+ if (rcpt_count > recipients_max && recipients_max > 0)
+ {
+ if (recipients_max_reject)
+ {
+ rcpt_fail_count++;
+ smtp_printf("552 too many recipients\r\n", FALSE);
+ if (!toomany)
+ log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: message "
+ "rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE));
+ }
+ else
+ {
+ rcpt_defer_count++;
+ smtp_printf("452 too many recipients\r\n", FALSE);
+ if (!toomany)
+ log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: excess "
+ "temporarily rejected: sender=<%s> %s", sender_address,
+ host_and_ident(TRUE));
+ }
- toomany = TRUE;
- break;
- }
+ toomany = TRUE;
+ break;
+ }
- /* If we have passed the threshold for rate limiting, apply the current
- delay, and update it for next time, provided this is a limited host. */
+ /* If we have passed the threshold for rate limiting, apply the current
+ delay, and update it for next time, provided this is a limited host. */
- if (rcpt_count > smtp_rlr_threshold &&
- verify_check_host(&smtp_ratelimit_hosts) == OK)
- {
- DEBUG(D_receive) debug_printf("rate limit RCPT: delay %.3g sec\n",
- smtp_delay_rcpt/1000.0);
- millisleep((int)smtp_delay_rcpt);
- smtp_delay_rcpt *= smtp_rlr_factor;
- if (smtp_delay_rcpt > (double)smtp_rlr_limit)
- smtp_delay_rcpt = (double)smtp_rlr_limit;
- }
+ if (rcpt_count > smtp_rlr_threshold &&
+ verify_check_host(&smtp_ratelimit_hosts) == OK)
+ {
+ DEBUG(D_receive) debug_printf("rate limit RCPT: delay %.3g sec\n",
+ smtp_delay_rcpt/1000.0);
+ millisleep((int)smtp_delay_rcpt);
+ smtp_delay_rcpt *= smtp_rlr_factor;
+ if (smtp_delay_rcpt > (double)smtp_rlr_limit)
+ smtp_delay_rcpt = (double)smtp_rlr_limit;
+ }
- /* If the MAIL ACL discarded all the recipients, we bypass ACL checking
- for them. Otherwise, check the access control list for this recipient. As
- there may be a delay in this, re-check for a synchronization error
- afterwards, unless pipelining was advertised. */
+ /* If the MAIL ACL discarded all the recipients, we bypass ACL checking
+ for them. Otherwise, check the access control list for this recipient. As
+ there may be a delay in this, re-check for a synchronization error
+ afterwards, unless pipelining was advertised. */
- if (recipients_discarded)
- rc = DISCARD;
- else
- if ( (rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
- &log_msg)) == OK
- && !smtp_in_pipelining_advertised && !check_sync())
- goto SYNC_FAILURE;
+ if (recipients_discarded)
+ rc = DISCARD;
+ else
+ if ( (rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
+ &log_msg)) == OK
+ && !smtp_in_pipelining_advertised && !check_sync())
+ goto SYNC_FAILURE;
- /* The ACL was happy */
+ /* The ACL was happy */
- if (rc == OK)
- {
- BOOL more = pipeline_response();
+ if (rc == OK)
+ {
+ BOOL more = pipeline_response();
- if (user_msg)
- smtp_user_msg(US"250", user_msg);
- else
- smtp_printf("250 Accepted\r\n", more);
- receive_add_recipient(recipient, -1);
+ if (user_msg)
+ smtp_user_msg(US"250", user_msg);
+ else
+ smtp_printf("250 Accepted\r\n", more);
+ receive_add_recipient(recipient, -1);
- /* Set the dsn flags in the recipients_list */
- recipients_list[recipients_count-1].orcpt = orcpt;
- recipients_list[recipients_count-1].dsn_flags = flags;
+ /* Set the dsn flags in the recipients_list */
+ recipients_list[recipients_count-1].orcpt = orcpt;
+ recipients_list[recipients_count-1].dsn_flags = flags;
- DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n",
- recipients_list[recipients_count-1].orcpt,
- recipients_list[recipients_count-1].dsn_flags);
- }
+ DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n",
+ recipients_list[recipients_count-1].orcpt,
+ recipients_list[recipients_count-1].dsn_flags);
+ }
- /* The recipient was discarded */
+ /* The recipient was discarded */
- else if (rc == DISCARD)
- {
- if (user_msg)
- smtp_user_msg(US"250", user_msg);
- else
- smtp_printf("250 Accepted\r\n", FALSE);
- rcpt_fail_count++;
- discarded = TRUE;
- log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
- "discarded by %s ACL%s%s", host_and_ident(TRUE),
- sender_address_unrewritten? sender_address_unrewritten : sender_address,
- smtp_cmd_argument, recipients_discarded? "MAIL" : "RCPT",
- log_msg ? US": " : US"", log_msg ? log_msg : US"");
- }
+ else if (rc == DISCARD)
+ {
+ if (user_msg)
+ smtp_user_msg(US"250", user_msg);
+ else
+ smtp_printf("250 Accepted\r\n", FALSE);
+ rcpt_fail_count++;
+ discarded = TRUE;
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
+ "discarded by %s ACL%s%s", host_and_ident(TRUE),
+ sender_address_unrewritten? sender_address_unrewritten : sender_address,
+ smtp_cmd_argument, recipients_discarded? "MAIL" : "RCPT",
+ log_msg ? US": " : US"", log_msg ? log_msg : US"");
+ }
- /* Either the ACL failed the address, or it was deferred. */
+ /* Either the ACL failed the address, or it was deferred. */
- else
- {
- if (rc == FAIL) rcpt_fail_count++; else rcpt_defer_count++;
- done = smtp_handle_acl_fail(ACL_WHERE_RCPT, rc, user_msg, log_msg);
- }
- break;
+ else
+ {
+ if (rc == FAIL) rcpt_fail_count++; else rcpt_defer_count++;
+ done = smtp_handle_acl_fail(ACL_WHERE_RCPT, rc, user_msg, log_msg);
+ }
+ break;
/* The DATA command is legal only if it follows successful MAIL FROM
with the DATA rejection (an idea suggested by Tony Finch). */
case BDAT_CMD:
- HAD(SCH_BDAT);
{
int n;
+ HAD(SCH_BDAT);
if (chunking_state != CHUNKING_OFFERED)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
}
case DATA_CMD:
- HAD(SCH_DATA);
- dot_ends = TRUE;
-
- DATA_BDAT: /* Common code for DATA and BDAT */
- if (!discarded && recipients_count <= 0)
- {
- if (rcpt_smtp_response_same && rcpt_smtp_response != NULL)
- {
- uschar *code = US"503";
- int len = Ustrlen(rcpt_smtp_response);
- smtp_respond(code, 3, FALSE, US"All RCPT commands were rejected with "
- "this error:");
- /* Responses from smtp_printf() will have \r\n on the end */
- if (len > 2 && rcpt_smtp_response[len-2] == '\r')
- rcpt_smtp_response[len-2] = 0;
- smtp_respond(code, 3, FALSE, rcpt_smtp_response);
- }
- if (smtp_in_pipelining_advertised && last_was_rcpt)
- smtp_printf("503 Valid RCPT command must precede %s\r\n", FALSE,
- smtp_names[smtp_connection_had[smtp_ch_index-1]]);
- else
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- smtp_connection_had[smtp_ch_index-1] == SCH_DATA
- ? US"valid RCPT command must precede DATA"
- : US"valid RCPT command must precede BDAT");
+ HAD(SCH_DATA);
+ dot_ends = TRUE;
- if (chunking_state > CHUNKING_OFFERED)
- bdat_flush_data();
- break;
- }
+ DATA_BDAT: /* Common code for DATA and BDAT */
+ if (!discarded && recipients_count <= 0)
+ {
+ if (rcpt_smtp_response_same && rcpt_smtp_response != NULL)
+ {
+ uschar *code = US"503";
+ int len = Ustrlen(rcpt_smtp_response);
+ smtp_respond(code, 3, FALSE, US"All RCPT commands were rejected with "
+ "this error:");
+ /* Responses from smtp_printf() will have \r\n on the end */
+ if (len > 2 && rcpt_smtp_response[len-2] == '\r')
+ rcpt_smtp_response[len-2] = 0;
+ smtp_respond(code, 3, FALSE, rcpt_smtp_response);
+ }
+ if (smtp_in_pipelining_advertised && last_was_rcpt)
+ smtp_printf("503 Valid RCPT command must precede %s\r\n", FALSE,
+ smtp_names[smtp_connection_had[smtp_ch_index-1]]);
+ else
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ smtp_connection_had[smtp_ch_index-1] == SCH_DATA
+ ? US"valid RCPT command must precede DATA"
+ : US"valid RCPT command must precede BDAT");
- if (toomany && recipients_max_reject)
- {
- sender_address = NULL; /* This will allow a new MAIL without RSET */
- sender_address_unrewritten = NULL;
- smtp_printf("554 Too many recipients\r\n", FALSE);
- break;
- }
+ if (chunking_state > CHUNKING_OFFERED)
+ bdat_flush_data();
+ break;
+ }
- if (chunking_state > CHUNKING_OFFERED)
- rc = OK; /* No predata ACL or go-ahead output for BDAT */
- else
- {
- /* If there is an ACL, re-check the synchronization afterwards, since the
- ACL may have delayed. To handle cutthrough delivery enforce a dummy call
- to get the DATA command sent. */
+ if (toomany && recipients_max_reject)
+ {
+ sender_address = NULL; /* This will allow a new MAIL without RSET */
+ sender_address_unrewritten = NULL;
+ smtp_printf("554 Too many recipients\r\n", FALSE);
+ break;
+ }
- if (acl_smtp_predata == NULL && cutthrough.cctx.sock < 0)
- rc = OK;
+ if (chunking_state > CHUNKING_OFFERED)
+ rc = OK; /* No predata ACL or go-ahead output for BDAT */
else
{
- uschar * acl = acl_smtp_predata ? acl_smtp_predata : US"accept";
- enable_dollar_recipients = TRUE;
- rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
- &log_msg);
- enable_dollar_recipients = FALSE;
- if (rc == OK && !check_sync())
- goto SYNC_FAILURE;
+ /* If there is an ACL, re-check the synchronization afterwards, since the
+ ACL may have delayed. To handle cutthrough delivery enforce a dummy call
+ to get the DATA command sent. */
- if (rc != OK)
- { /* Either the ACL failed the address, or it was deferred. */
- done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
- break;
+ if (acl_smtp_predata == NULL && cutthrough.cctx.sock < 0)
+ rc = OK;
+ else
+ {
+ uschar * acl = acl_smtp_predata ? acl_smtp_predata : US"accept";
+ enable_dollar_recipients = TRUE;
+ rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
+ &log_msg);
+ enable_dollar_recipients = FALSE;
+ if (rc == OK && !check_sync())
+ goto SYNC_FAILURE;
+
+ if (rc != OK)
+ { /* Either the ACL failed the address, or it was deferred. */
+ done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
+ break;
+ }
}
- }
- if (user_msg)
- smtp_user_msg(US"354", user_msg);
- else
- smtp_printf(
- "354 Enter message, ending with \".\" on a line by itself\r\n", FALSE);
- }
+ if (user_msg)
+ smtp_user_msg(US"354", user_msg);
+ else
+ smtp_printf(
+ "354 Enter message, ending with \".\" on a line by itself\r\n", FALSE);
+ }
#ifdef TCP_QUICKACK
- if (smtp_in) /* all ACKs needed to ramp window up for bulk data */
- (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
- US &on, sizeof(on));
+ if (smtp_in) /* all ACKs needed to ramp window up for bulk data */
+ (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
+ US &on, sizeof(on));
#endif
- done = 3;
- message_ended = END_NOTENDED; /* Indicate in middle of data */
+ done = 3;
+ message_ended = END_NOTENDED; /* Indicate in middle of data */
- break;
+ break;
case VRFY_CMD:
case EXPN_CMD:
- HAD(SCH_EXPN);
- rc = acl_check(ACL_WHERE_EXPN, NULL, acl_smtp_expn, &user_msg, &log_msg);
- if (rc != OK)
- done = smtp_handle_acl_fail(ACL_WHERE_EXPN, rc, user_msg, log_msg);
- else
- {
- BOOL save_log_testing_mode = log_testing_mode;
- address_test_mode = log_testing_mode = TRUE;
- (void) verify_address(deliver_make_addr(smtp_cmd_data, FALSE),
- smtp_out, vopt_is_recipient | vopt_qualify | vopt_expn, -1, -1, -1,
- NULL, NULL, NULL);
- address_test_mode = FALSE;
- log_testing_mode = save_log_testing_mode; /* true for -bh */
- }
- break;
+ HAD(SCH_EXPN);
+ rc = acl_check(ACL_WHERE_EXPN, NULL, acl_smtp_expn, &user_msg, &log_msg);
+ if (rc != OK)
+ done = smtp_handle_acl_fail(ACL_WHERE_EXPN, rc, user_msg, log_msg);
+ else
+ {
+ BOOL save_log_testing_mode = log_testing_mode;
+ address_test_mode = log_testing_mode = TRUE;
+ (void) verify_address(deliver_make_addr(smtp_cmd_data, FALSE),
+ smtp_out, vopt_is_recipient | vopt_qualify | vopt_expn, -1, -1, -1,
+ NULL, NULL, NULL);
+ address_test_mode = FALSE;
+ log_testing_mode = save_log_testing_mode; /* true for -bh */
+ }
+ break;
#ifdef SUPPORT_TLS
case STARTTLS_CMD:
- HAD(SCH_STARTTLS);
- if (!tls_advertised)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"STARTTLS command used when not advertised");
- break;
- }
+ HAD(SCH_STARTTLS);
+ if (!tls_advertised)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"STARTTLS command used when not advertised");
+ break;
+ }
- /* Apply an ACL check if one is defined */
+ /* Apply an ACL check if one is defined */
- if ( acl_smtp_starttls
- && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
- &user_msg, &log_msg)) != OK
- )
- {
- done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
- break;
- }
+ if ( acl_smtp_starttls
+ && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
+ &user_msg, &log_msg)) != OK
+ )
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
+ break;
+ }
- /* RFC 2487 is not clear on when this command may be sent, though it
- does state that all information previously obtained from the client
- must be discarded if a TLS session is started. It seems reasonable to
- do an implied RSET when STARTTLS is received. */
-
- incomplete_transaction_log(US"STARTTLS");
- cancel_cutthrough_connection(TRUE, US"STARTTLS received");
- smtp_reset(reset_point);
- toomany = FALSE;
- cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE;
-
- /* There's an attack where more data is read in past the STARTTLS command
- before TLS is negotiated, then assumed to be part of the secure session
- when used afterwards; we use segregated input buffers, so are not
- vulnerable, but we want to note when it happens and, for sheer paranoia,
- ensure that the buffer is "wiped".
- Pipelining sync checks will normally have protected us too, unless disabled
- by configuration. */
-
- if (receive_smtp_buffered())
- {
- DEBUG(D_any)
- debug_printf("Non-empty input buffer after STARTTLS; naive attack?\n");
- if (tls_in.active.sock < 0)
- smtp_inend = smtp_inptr = smtp_inbuffer;
- /* and if TLS is already active, tls_server_start() should fail */
- }
+ /* RFC 2487 is not clear on when this command may be sent, though it
+ does state that all information previously obtained from the client
+ must be discarded if a TLS session is started. It seems reasonable to
+ do an implied RSET when STARTTLS is received. */
- /* There is nothing we value in the input buffer and if TLS is successfully
- negotiated, we won't use this buffer again; if TLS fails, we'll just read
- fresh content into it. The buffer contains arbitrary content from an
- untrusted remote source; eg: NOOP <shellcode>\r\nSTARTTLS\r\n
- It seems safest to just wipe away the content rather than leave it as a
- target to jump to. */
+ incomplete_transaction_log(US"STARTTLS");
+ cancel_cutthrough_connection(TRUE, US"STARTTLS received");
+ smtp_reset(reset_point);
+ toomany = FALSE;
+ cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE;
+
+ /* There's an attack where more data is read in past the STARTTLS command
+ before TLS is negotiated, then assumed to be part of the secure session
+ when used afterwards; we use segregated input buffers, so are not
+ vulnerable, but we want to note when it happens and, for sheer paranoia,
+ ensure that the buffer is "wiped".
+ Pipelining sync checks will normally have protected us too, unless disabled
+ by configuration. */
+
+ if (receive_smtp_buffered())
+ {
+ DEBUG(D_any)
+ debug_printf("Non-empty input buffer after STARTTLS; naive attack?\n");
+ if (tls_in.active.sock < 0)
+ smtp_inend = smtp_inptr = smtp_inbuffer;
+ /* and if TLS is already active, tls_server_start() should fail */
+ }
- memset(smtp_inbuffer, 0, IN_BUFFER_SIZE);
+ /* There is nothing we value in the input buffer and if TLS is successfully
+ negotiated, we won't use this buffer again; if TLS fails, we'll just read
+ fresh content into it. The buffer contains arbitrary content from an
+ untrusted remote source; eg: NOOP <shellcode>\r\nSTARTTLS\r\n
+ It seems safest to just wipe away the content rather than leave it as a
+ target to jump to. */
- /* Attempt to start up a TLS session, and if successful, discard all
- knowledge that was obtained previously. At least, that's what the RFC says,
- and that's what happens by default. However, in order to work round YAEB,
- there is an option to remember the esmtp state. Sigh.
+ memset(smtp_inbuffer, 0, IN_BUFFER_SIZE);
- We must allow for an extra EHLO command and an extra AUTH command after
- STARTTLS that don't add to the nonmail command count. */
+ /* Attempt to start up a TLS session, and if successful, discard all
+ knowledge that was obtained previously. At least, that's what the RFC says,
+ and that's what happens by default. However, in order to work round YAEB,
+ there is an option to remember the esmtp state. Sigh.
- s = NULL;
- if ((rc = tls_server_start(tls_require_ciphers, &s)) == OK)
- {
- if (!tls_remember_esmtp)
- helo_seen = esmtp = auth_advertised = smtp_in_pipelining_advertised = FALSE;
- cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
- cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
- cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
- if (sender_helo_name)
- {
- store_free(sender_helo_name);
- sender_helo_name = NULL;
- host_build_sender_fullhost(); /* Rebuild */
- set_process_info("handling incoming TLS connection from %s",
- host_and_ident(FALSE));
- }
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [ (esmtp
- ? pextend + (sender_host_authenticated ? pauthed : 0)
- : pnormal)
- + (tls_in.active.sock >= 0 ? pcrpted : 0)
- ];
+ We must allow for an extra EHLO command and an extra AUTH command after
+ STARTTLS that don't add to the nonmail command count. */
- sender_host_auth_pubname = sender_host_authenticated = NULL;
- authenticated_id = NULL;
- sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
- DEBUG(D_tls) debug_printf("TLS active\n");
- break; /* Successful STARTTLS */
- }
- else
- (void) smtp_log_tls_fail(s);
+ s = NULL;
+ if ((rc = tls_server_start(tls_require_ciphers, &s)) == OK)
+ {
+ if (!tls_remember_esmtp)
+ helo_seen = esmtp = auth_advertised = smtp_in_pipelining_advertised = FALSE;
+ cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
+ if (sender_helo_name)
+ {
+ store_free(sender_helo_name);
+ sender_helo_name = NULL;
+ host_build_sender_fullhost(); /* Rebuild */
+ set_process_info("handling incoming TLS connection from %s",
+ host_and_ident(FALSE));
+ }
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active.sock >= 0 ? pcrpted : 0)
+ ];
+
+ sender_host_auth_pubname = sender_host_authenticated = NULL;
+ authenticated_id = NULL;
+ sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
+ DEBUG(D_tls) debug_printf("TLS active\n");
+ break; /* Successful STARTTLS */
+ }
+ else
+ (void) smtp_log_tls_fail(s);
- /* Some local configuration problem was discovered before actually trying
- to do a TLS handshake; give a temporary error. */
+ /* Some local configuration problem was discovered before actually trying
+ to do a TLS handshake; give a temporary error. */
- if (rc == DEFER)
- {
- smtp_printf("454 TLS currently unavailable\r\n", FALSE);
- break;
- }
+ if (rc == DEFER)
+ {
+ smtp_printf("454 TLS currently unavailable\r\n", FALSE);
+ break;
+ }
- /* Hard failure. Reject everything except QUIT or closed connection. One
- cause for failure is a nested STARTTLS, in which case tls_in.active remains
- set, but we must still reject all incoming commands. */
+ /* Hard failure. Reject everything except QUIT or closed connection. One
+ cause for failure is a nested STARTTLS, in which case tls_in.active remains
+ set, but we must still reject all incoming commands. */
- DEBUG(D_tls) debug_printf("TLS failed to start\n");
- while (done <= 0) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
- {
- case EOF_CMD:
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
- smtp_get_connection_info());
- smtp_notquit_exit(US"tls-failed", NULL, NULL);
- done = 2;
- break;
+ DEBUG(D_tls) debug_printf("TLS failed to start\n");
+ while (done <= 0) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
+ {
+ case EOF_CMD:
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
+ smtp_get_connection_info());
+ smtp_notquit_exit(US"tls-failed", NULL, NULL);
+ done = 2;
+ break;
- /* It is perhaps arguable as to which exit ACL should be called here,
- but as it is probably a situation that almost never arises, it
- probably doesn't matter. We choose to call the real QUIT ACL, which in
- some sense is perhaps "right". */
-
- case QUIT_CMD:
- user_msg = NULL;
- if ( acl_smtp_quit
- && ((rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
- &log_msg)) == ERROR))
- log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
- log_msg);
- if (user_msg)
- smtp_respond(US"221", 3, TRUE, user_msg);
- else
- smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
- smtp_get_connection_info());
- done = 2;
- break;
+ /* It is perhaps arguable as to which exit ACL should be called here,
+ but as it is probably a situation that almost never arises, it
+ probably doesn't matter. We choose to call the real QUIT ACL, which in
+ some sense is perhaps "right". */
+
+ case QUIT_CMD:
+ user_msg = NULL;
+ if ( acl_smtp_quit
+ && ((rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
+ &log_msg)) == ERROR))
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ log_msg);
+ if (user_msg)
+ smtp_respond(US"221", 3, TRUE, user_msg);
+ else
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+ done = 2;
+ break;
- default:
- smtp_printf("554 Security failure\r\n", FALSE);
- break;
- }
- tls_close(NULL, TLS_SHUTDOWN_NOWAIT);
- break;
+ default:
+ smtp_printf("554 Security failure\r\n", FALSE);
+ break;
+ }
+ tls_close(NULL, TLS_SHUTDOWN_NOWAIT);
+ break;
#endif
message. */
case QUIT_CMD:
- smtp_quit_handler(&user_msg, &log_msg);
- done = 2;
- break;
+ smtp_quit_handler(&user_msg, &log_msg);
+ done = 2;
+ break;
case RSET_CMD:
- smtp_rset_handler();
- cancel_cutthrough_connection(TRUE, US"RSET received");
- smtp_reset(reset_point);
- toomany = FALSE;
- break;
+ smtp_rset_handler();
+ cancel_cutthrough_connection(TRUE, US"RSET received");
+ smtp_reset(reset_point);
+ toomany = FALSE;
+ break;
case NOOP_CMD:
- HAD(SCH_NOOP);
- smtp_printf("250 OK\r\n", FALSE);
- break;
+ HAD(SCH_NOOP);
+ smtp_printf("250 OK\r\n", FALSE);
+ break;
/* Show ETRN/EXPN/VRFY if there's an ACL for checking hosts; if actually
response. */
case HELP_CMD:
- HAD(SCH_HELP);
- smtp_printf("214-Commands supported:\r\n", TRUE);
- {
- uschar buffer[256];
- buffer[0] = 0;
- Ustrcat(buffer, " AUTH");
- #ifdef SUPPORT_TLS
- if (tls_in.active.sock < 0 &&
- verify_check_host(&tls_advertise_hosts) != FAIL)
- Ustrcat(buffer, " STARTTLS");
- #endif
- Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA BDAT");
- Ustrcat(buffer, " NOOP QUIT RSET HELP");
- if (acl_smtp_etrn != NULL) Ustrcat(buffer, " ETRN");
- if (acl_smtp_expn != NULL) Ustrcat(buffer, " EXPN");
- if (acl_smtp_vrfy != NULL) Ustrcat(buffer, " VRFY");
- smtp_printf("214%s\r\n", FALSE, buffer);
- }
- break;
+ HAD(SCH_HELP);
+ smtp_printf("214-Commands supported:\r\n", TRUE);
+ {
+ uschar buffer[256];
+ buffer[0] = 0;
+ Ustrcat(buffer, " AUTH");
+ #ifdef SUPPORT_TLS
+ if (tls_in.active.sock < 0 &&
+ verify_check_host(&tls_advertise_hosts) != FAIL)
+ Ustrcat(buffer, " STARTTLS");
+ #endif
+ Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA BDAT");
+ Ustrcat(buffer, " NOOP QUIT RSET HELP");
+ if (acl_smtp_etrn != NULL) Ustrcat(buffer, " ETRN");
+ if (acl_smtp_expn != NULL) Ustrcat(buffer, " EXPN");
+ if (acl_smtp_vrfy != NULL) Ustrcat(buffer, " VRFY");
+ smtp_printf("214%s\r\n", FALSE, buffer);
+ }
+ break;
case EOF_CMD:
- incomplete_transaction_log(US"connection lost");
- smtp_notquit_exit(US"connection-lost", US"421",
- US"%s lost input connection", smtp_active_hostname);
-
- /* Don't log by default unless in the middle of a message, as some mailers
- just drop the call rather than sending QUIT, and it clutters up the logs.
- */
-
- if (sender_address || recipients_count > 0)
- log_write(L_lost_incoming_connection, LOG_MAIN,
- "unexpected %s while reading SMTP command from %s%s%s D=%s",
- sender_host_unknown ? "EOF" : "disconnection",
- tcp_in_fastopen && !tcp_in_fastopen_logged ? US"TFO " : US"",
- host_and_ident(FALSE), smtp_read_error,
- string_timesince(&smtp_connection_start)
- );
+ incomplete_transaction_log(US"connection lost");
+ smtp_notquit_exit(US"connection-lost", US"421",
+ US"%s lost input connection", smtp_active_hostname);
+
+ /* Don't log by default unless in the middle of a message, as some mailers
+ just drop the call rather than sending QUIT, and it clutters up the logs.
+ */
+
+ if (sender_address || recipients_count > 0)
+ log_write(L_lost_incoming_connection, LOG_MAIN,
+ "unexpected %s while reading SMTP command from %s%s%s D=%s",
+ sender_host_unknown ? "EOF" : "disconnection",
+ tcp_in_fastopen && !tcp_in_fastopen_logged ? US"TFO " : US"",
+ host_and_ident(FALSE), smtp_read_error,
+ string_timesince(&smtp_connection_start)
+ );
- else
- log_write(L_smtp_connection, LOG_MAIN, "%s %slost%s D=%s",
- smtp_get_connection_info(),
- tcp_in_fastopen && !tcp_in_fastopen_logged ? US"TFO " : US"",
- smtp_read_error,
- string_timesince(&smtp_connection_start)
- );
-
- done = 1;
- break;
+ else
+ log_write(L_smtp_connection, LOG_MAIN, "%s %slost%s D=%s",
+ smtp_get_connection_info(),
+ tcp_in_fastopen && !tcp_in_fastopen_logged ? US"TFO " : US"",
+ smtp_read_error,
+ string_timesince(&smtp_connection_start)
+ );
+
+ done = 1;
+ break;
case ETRN_CMD:
- HAD(SCH_ETRN);
- if (sender_address)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"ETRN is not permitted inside a transaction");
- break;
- }
+ HAD(SCH_ETRN);
+ if (sender_address)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"ETRN is not permitted inside a transaction");
+ break;
+ }
- log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
- host_and_ident(FALSE));
+ log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
+ host_and_ident(FALSE));
- if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
- &user_msg, &log_msg)) != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
- break;
- }
+ if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
+ &user_msg, &log_msg)) != OK)
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
+ break;
+ }
- /* Compute the serialization key for this command. */
+ /* Compute the serialization key for this command. */
- etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_cmd_data);
+ etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_cmd_data);
- /* If a command has been specified for running as a result of ETRN, we
- permit any argument to ETRN. If not, only the # standard form is permitted,
- since that is strictly the only kind of ETRN that can be implemented
- according to the RFC. */
+ /* If a command has been specified for running as a result of ETRN, we
+ permit any argument to ETRN. If not, only the # standard form is permitted,
+ since that is strictly the only kind of ETRN that can be implemented
+ according to the RFC. */
- if (smtp_etrn_command)
- {
- uschar *error;
- BOOL rc;
- etrn_command = smtp_etrn_command;
- deliver_domain = smtp_cmd_data;
- rc = transport_set_up_command(&argv, smtp_etrn_command, TRUE, 0, NULL,
- US"ETRN processing", &error);
- deliver_domain = NULL;
- if (!rc)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to set up ETRN command: %s",
- error);
- smtp_printf("458 Internal failure\r\n", FALSE);
- break;
- }
- }
+ if (smtp_etrn_command)
+ {
+ uschar *error;
+ BOOL rc;
+ etrn_command = smtp_etrn_command;
+ deliver_domain = smtp_cmd_data;
+ rc = transport_set_up_command(&argv, smtp_etrn_command, TRUE, 0, NULL,
+ US"ETRN processing", &error);
+ deliver_domain = NULL;
+ if (!rc)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to set up ETRN command: %s",
+ error);
+ smtp_printf("458 Internal failure\r\n", FALSE);
+ break;
+ }
+ }
- /* Else set up to call Exim with the -R option. */
+ /* Else set up to call Exim with the -R option. */
- else
- {
- if (*smtp_cmd_data++ != '#')
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"argument must begin with #");
- break;
- }
- etrn_command = US"exim -R";
- argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
- *queue_name ? 4 : 2,
- US"-R", smtp_cmd_data,
- US"-MCG", queue_name);
- }
+ else
+ {
+ if (*smtp_cmd_data++ != '#')
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"argument must begin with #");
+ break;
+ }
+ etrn_command = US"exim -R";
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
+ *queue_name ? 4 : 2,
+ US"-R", smtp_cmd_data,
+ US"-MCG", queue_name);
+ }
- /* If we are host-testing, don't actually do anything. */
+ /* If we are host-testing, don't actually do anything. */
- if (host_checking)
- {
- HDEBUG(D_any)
- {
- debug_printf("ETRN command is: %s\n", etrn_command);
- debug_printf("ETRN command execution skipped\n");
- }
- if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
- else smtp_user_msg(US"250", user_msg);
- break;
- }
+ if (host_checking)
+ {
+ HDEBUG(D_any)
+ {
+ debug_printf("ETRN command is: %s\n", etrn_command);
+ debug_printf("ETRN command execution skipped\n");
+ }
+ if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
+ else smtp_user_msg(US"250", user_msg);
+ break;
+ }
- /* If ETRN queue runs are to be serialized, check the database to
- ensure one isn't already running. */
+ /* If ETRN queue runs are to be serialized, check the database to
+ ensure one isn't already running. */
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
- {
- smtp_printf("458 Already processing %s\r\n", FALSE, smtp_cmd_data);
- break;
- }
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
+ {
+ smtp_printf("458 Already processing %s\r\n", FALSE, smtp_cmd_data);
+ break;
+ }
- /* Fork a child process and run the command. We don't want to have to
- wait for the process at any point, so set SIGCHLD to SIG_IGN before
- forking. It should be set that way anyway for external incoming SMTP,
- but we save and restore to be tidy. If serialization is required, we
- actually run the command in yet another process, so we can wait for it
- to complete and then remove the serialization lock. */
+ /* Fork a child process and run the command. We don't want to have to
+ wait for the process at any point, so set SIGCHLD to SIG_IGN before
+ forking. It should be set that way anyway for external incoming SMTP,
+ but we save and restore to be tidy. If serialization is required, we
+ actually run the command in yet another process, so we can wait for it
+ to complete and then remove the serialization lock. */
- oldsignal = signal(SIGCHLD, SIG_IGN);
+ oldsignal = signal(SIGCHLD, SIG_IGN);
- if ((pid = fork()) == 0)
- {
- smtp_input = FALSE; /* This process is not associated with the */
- (void)fclose(smtp_in); /* SMTP call any more. */
- (void)fclose(smtp_out);
+ if ((pid = fork()) == 0)
+ {
+ smtp_input = FALSE; /* This process is not associated with the */
+ (void)fclose(smtp_in); /* SMTP call any more. */
+ (void)fclose(smtp_out);
- signal(SIGCHLD, SIG_DFL); /* Want to catch child */
+ signal(SIGCHLD, SIG_DFL); /* Want to catch child */
- /* If not serializing, do the exec right away. Otherwise, fork down
- into another process. */
+ /* If not serializing, do the exec right away. Otherwise, fork down
+ into another process. */
- if (!smtp_etrn_serialize || (pid = fork()) == 0)
- {
- DEBUG(D_exec) debug_print_argv(argv);
- exim_nullstd(); /* Ensure std{in,out,err} exist */
- execv(CS argv[0], (char *const *)argv);
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "exec of \"%s\" (ETRN) failed: %s",
- etrn_command, strerror(errno));
- _exit(EXIT_FAILURE); /* paranoia */
- }
+ if (!smtp_etrn_serialize || (pid = fork()) == 0)
+ {
+ DEBUG(D_exec) debug_print_argv(argv);
+ exim_nullstd(); /* Ensure std{in,out,err} exist */
+ execv(CS argv[0], (char *const *)argv);
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "exec of \"%s\" (ETRN) failed: %s",
+ etrn_command, strerror(errno));
+ _exit(EXIT_FAILURE); /* paranoia */
+ }
- /* Obey this if smtp_serialize and the 2nd fork yielded non-zero. That
- is, we are in the first subprocess, after forking again. All we can do
- for a failing fork is to log it. Otherwise, wait for the 2nd process to
- complete, before removing the serialization. */
+ /* Obey this if smtp_serialize and the 2nd fork yielded non-zero. That
+ is, we are in the first subprocess, after forking again. All we can do
+ for a failing fork is to log it. Otherwise, wait for the 2nd process to
+ complete, before removing the serialization. */
- if (pid < 0)
- log_write(0, LOG_MAIN|LOG_PANIC, "2nd fork for serialized ETRN "
- "failed: %s", strerror(errno));
- else
- {
- int status;
- DEBUG(D_any) debug_printf("waiting for serialized ETRN process %d\n",
- (int)pid);
- (void)wait(&status);
- DEBUG(D_any) debug_printf("serialized ETRN process %d ended\n",
- (int)pid);
- }
+ if (pid < 0)
+ log_write(0, LOG_MAIN|LOG_PANIC, "2nd fork for serialized ETRN "
+ "failed: %s", strerror(errno));
+ else
+ {
+ int status;
+ DEBUG(D_any) debug_printf("waiting for serialized ETRN process %d\n",
+ (int)pid);
+ (void)wait(&status);
+ DEBUG(D_any) debug_printf("serialized ETRN process %d ended\n",
+ (int)pid);
+ }
- enq_end(etrn_serialize_key);
- _exit(EXIT_SUCCESS);
- }
+ enq_end(etrn_serialize_key);
+ _exit(EXIT_SUCCESS);
+ }
- /* Back in the top level SMTP process. Check that we started a subprocess
- and restore the signal state. */
+ /* Back in the top level SMTP process. Check that we started a subprocess
+ and restore the signal state. */
- if (pid < 0)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "fork of process for ETRN failed: %s",
- strerror(errno));
- smtp_printf("458 Unable to fork process\r\n", FALSE);
- if (smtp_etrn_serialize) enq_end(etrn_serialize_key);
- }
- else
- {
- if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
- else smtp_user_msg(US"250", user_msg);
- }
+ if (pid < 0)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "fork of process for ETRN failed: %s",
+ strerror(errno));
+ smtp_printf("458 Unable to fork process\r\n", FALSE);
+ if (smtp_etrn_serialize) enq_end(etrn_serialize_key);
+ }
+ else
+ {
+ if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
+ else smtp_user_msg(US"250", user_msg);
+ }
- signal(SIGCHLD, oldsignal);
- break;
+ signal(SIGCHLD, oldsignal);
+ break;
case BADARG_CMD:
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"unexpected argument data");
- break;
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"unexpected argument data");
+ break;
/* This currently happens only for NULLs, but could be extended. */
case BADCHAR_CMD:
- done = synprot_error(L_smtp_syntax_error, 0, NULL, /* Just logs */
- US"NUL character(s) present (shown as '?')");
- smtp_printf("501 NUL characters are not allowed in SMTP commands\r\n", FALSE);
- break;
+ done = synprot_error(L_smtp_syntax_error, 0, NULL, /* Just logs */
+ US"NUL character(s) present (shown as '?')");
+ smtp_printf("501 NUL characters are not allowed in SMTP commands\r\n",
+ FALSE);
+ break;
case BADSYN_CMD:
SYNC_FAILURE:
- if (smtp_inend >= smtp_inbuffer + IN_BUFFER_SIZE)
- smtp_inend = smtp_inbuffer + IN_BUFFER_SIZE - 1;
- c = smtp_inend - smtp_inptr;
- if (c > 150) c = 150; /* limit logged amount */
- smtp_inptr[c] = 0;
- incomplete_transaction_log(US"sync failure");
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
- "(next input sent too soon: pipelining was%s advertised): "
- "rejected \"%s\" %s next input=\"%s\"",
- smtp_in_pipelining_advertised ? "" : " not",
- smtp_cmd_buffer, host_and_ident(TRUE),
- string_printing(smtp_inptr));
- smtp_notquit_exit(US"synchronization-error", US"554",
- US"SMTP synchronization error");
- done = 1; /* Pretend eof - drops connection */
- break;
+ if (smtp_inend >= smtp_inbuffer + IN_BUFFER_SIZE)
+ smtp_inend = smtp_inbuffer + IN_BUFFER_SIZE - 1;
+ c = smtp_inend - smtp_inptr;
+ if (c > 150) c = 150; /* limit logged amount */
+ smtp_inptr[c] = 0;
+ incomplete_transaction_log(US"sync failure");
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
+ "(next input sent too soon: pipelining was%s advertised): "
+ "rejected \"%s\" %s next input=\"%s\"",
+ smtp_in_pipelining_advertised ? "" : " not",
+ smtp_cmd_buffer, host_and_ident(TRUE),
+ string_printing(smtp_inptr));
+ smtp_notquit_exit(US"synchronization-error", US"554",
+ US"SMTP synchronization error");
+ done = 1; /* Pretend eof - drops connection */
+ break;
case TOO_MANY_NONMAIL_CMD:
- s = smtp_cmd_buffer;
- while (*s != 0 && !isspace(*s)) s++;
- incomplete_transaction_log(US"too many non-mail commands");
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "nonmail commands (last was \"%.*s\")", host_and_ident(FALSE),
- (int)(s - smtp_cmd_buffer), smtp_cmd_buffer);
- smtp_notquit_exit(US"bad-commands", US"554", US"Too many nonmail commands");
- done = 1; /* Pretend eof - drops connection */
- break;
+ s = smtp_cmd_buffer;
+ while (*s != 0 && !isspace(*s)) s++;
+ incomplete_transaction_log(US"too many non-mail commands");
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
+ "nonmail commands (last was \"%.*s\")", host_and_ident(FALSE),
+ (int)(s - smtp_cmd_buffer), smtp_cmd_buffer);
+ smtp_notquit_exit(US"bad-commands", US"554", US"Too many nonmail commands");
+ done = 1; /* Pretend eof - drops connection */
+ break;
#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
- smtp_printf("503 Command refused, required Proxy negotiation failed\r\n", FALSE);
- break;
+ smtp_printf("503 Command refused, required Proxy negotiation failed\r\n", FALSE);
+ break;
#endif
default:
- if (unknown_command_count++ >= smtp_max_unknown_commands)
- {
- log_write(L_smtp_syntax_error, LOG_MAIN,
- "SMTP syntax error in \"%s\" %s %s",
- string_printing(smtp_cmd_buffer), host_and_ident(TRUE),
- US"unrecognized command");
- incomplete_transaction_log(US"unrecognized command");
- smtp_notquit_exit(US"bad-commands", US"500",
- US"Too many unrecognized commands");
- done = 2;
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
- string_printing(smtp_cmd_buffer));
- }
- else
- done = synprot_error(L_smtp_syntax_error, 500, NULL,
- US"unrecognized command");
- break;
+ if (unknown_command_count++ >= smtp_max_unknown_commands)
+ {
+ log_write(L_smtp_syntax_error, LOG_MAIN,
+ "SMTP syntax error in \"%s\" %s %s",
+ string_printing(smtp_cmd_buffer), host_and_ident(TRUE),
+ US"unrecognized command");
+ incomplete_transaction_log(US"unrecognized command");
+ smtp_notquit_exit(US"bad-commands", US"500",
+ US"Too many unrecognized commands");
+ done = 2;
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
+ "unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
+ string_printing(smtp_cmd_buffer));
+ }
+ else
+ done = synprot_error(L_smtp_syntax_error, 500, NULL,
+ US"unrecognized command");
+ break;
}
/* This label is used by goto's inside loops that want to break out to
git://git.exim.org / users / heiko / exim.git / commitdiff