Handle Proxy Protocol v2 safely as well.

We had test suite failures (test suite success!) because Proxy Protocol
v2 (PPv2) wasn't being detected; by only reading 12 octets, the >= 16
check was failing.  But in fact I had previously only fixed reading
"only enough" for PPv1.

Handling both PPv1 and PPv2 is complicated because the minimum valid
length for PPv1 is 15 octets but for PPv2 the size to read is in the
15th and 16th octets.

So refactored a little and we now use a total of 3 reads for the PPv2
case (assuming no fragmentation, etc; we'll actually keep reading now
instead of aborting) to get the entire PPv2 header of exactly the right
size, so that TLS handshake immediately following the PP header is not
also swallowed.

Fixes: 2018
Tested: manually, TLS and non-TLS, PPv1 and PPv2, all ways.
Release: should be cherry-picked into 4.89RC series

diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog
index 69c778966f323cac8276e13ff05910916a2e6880..03c031106b5bae0523d3c54014ab981049a7547e 100644 (file)
--- a/doc/doc-txt/ChangeLog
+++ b/doc/doc-txt/ChangeLog
@@ -77,6 +77,8 @@ PP/03 Bug 2018: For Proxy Protocol and TLS-on-connect, do not over-read and
       instead leave the unprompted TLS handshake in socket buffer for the
       TLS library to consume.
 
       instead leave the unprompted TLS handshake in socket buffer for the
       TLS library to consume.
 

+PP/04 Bug 2018: Also handle Proxy Protocol v2 safely.
+

 
 Exim version 4.88
 -----------------
 
 Exim version 4.88
 -----------------

diff --git a/src/src/smtp_in.c b/src/src/smtp_in.c
index 1252603e5b69592995345335e689e649c11efdbd..2ea5b271d0b38f04de42fa128db6846e2b0d0f13 100644 (file)
--- a/src/src/smtp_in.c
+++ b/src/src/smtp_in.c
@@ -943,14 +943,31 @@ Return the amount read.
 */
 
 static int
 */
 
 static int

-swallow_until_crlf(int fd, void *vto, int capacity)
+swallow_until_crlf(int fd, uschar *base, int already, int capacity)

 {
 {

-  uschar *to = (uschar *)vto;
+  uschar *to = base + already;
+  uschar *cr;

   int have = 0;
   int ret;
   int last = 0;
 
   int have = 0;
   int ret;
   int last = 0;
 

-  while (capacity > 0) {
+  /* For "PROXY UNKNOWN\r\n" we, at time of writing, expect to have read
+  up through the \r; for the _normal_ case, we haven't yet seen the \r. */
+  cr = memchr(base, '\r', already);
+  if (cr != NULL)
+    {
+    if ((cr - base) < already - 1)
+      {
+      /* \r and presumed \n already within what we have; probably not
+      actually proxy protocol, but abort cleanly. */
+      return 0;
+      }
+    /* \r is last character read, just need one more. */
+    last = 1;
+    }
+
+  while (capacity > 0)
+    {

     do { ret = recv(fd, to, 1, 0); } while (ret == -1 && errno == EINTR);
     if (ret == -1)
       return -1;
     do { ret = recv(fd, to, 1, 0); } while (ret == -1 && errno == EINTR);
     if (ret == -1)
       return -1;


@@ -961,7 +978,7 @@ swallow_until_crlf(int fd, void *vto, int capacity)
       last = 1;
     capacity--;
     to++;
       last = 1;
     capacity--;
     to++;

-  }
+    }

   // reached end without having room for a final newline, abort
   errno = EOVERFLOW;
   return -1;
   // reached end without having room for a final newline, abort
   errno = EOVERFLOW;
   return -1;


@@ -1019,10 +1036,39 @@ struct sockaddr_in tmpaddr;
 char tmpip6[INET6_ADDRSTRLEN];
 struct sockaddr_in6 tmpaddr6;
 
 char tmpip6[INET6_ADDRSTRLEN];
 struct sockaddr_in6 tmpaddr6;
 

+/* We can't read "all data until end" because while SMTP is
+server-speaks-first, the TLS handshake is client-speaks-first, so for
+TLS-on-connect ports the proxy protocol header will usually be immediately
+followed by a TLS handshake, and with N TLS libraries, we can't reliably
+reinject data for reading by those.  So instead we first read "enough to be
+safely read within the header, and figure out how much more to read".
+For v1 we will later read to the end-of-line, for v2 we will read based upon
+the stated length.
+
+The v2 sig is 12 octets, and another 4 gets us the length, so we know how much
+data is needed total.  For v1, where the line looks like:
+PROXY TCPn L3src L3dest SrcPort DestPort \r\n
+
+However, for v1 there's also `PROXY UNKNOWN\r\n` which is only 15 octets.
+We seem to support that.  So, if we read 14 octets then we can tell if we're
+v2 or v1.  If we're v1, we can continue reading as normal.
+
+If we're v2, we can't slurp up the entire header.  We need the length in the
+15th & 16th octets, then to read everything after that.
+
+So to safely handle v1 and v2, with client-sent-first supported correctly,
+we have to do a minimum of 3 read calls, not 1.  Eww.
+*/
+
+#define PROXY_INITIAL_READ 14
+#define PROXY_V2_HEADER_SIZE 16
+#if PROXY_INITIAL_READ > PROXY_V2_HEADER_SIZE
+# error Code bug in sizes of data to read for proxy usage
+#endif
+

 int get_ok = 0;
 int size, ret;
 int fd = fileno(smtp_in);
 int get_ok = 0;
 int size, ret;
 int fd = fileno(smtp_in);

-#define PROXY_INITIAL_READ 12

 const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A";
 uschar * iptype;  /* To display debug info */
 struct timeval tv;
 const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A";
 uschar * iptype;  /* To display debug info */
 struct timeval tv;


@@ -1043,10 +1089,9 @@ if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS &tv, sizeof(tv)) < 0)
 do
   {
   /* The inbound host was declared to be a Proxy Protocol host, so
 do
   {
   /* The inbound host was declared to be a Proxy Protocol host, so

-     don't do a PEEK into the data, actually slurp it up. */
-  /* We assume that the zie of a v2sig is less than the size of a complete
-     PROXYv1 line, so that we will _have_ to read more data; "PROXY TCPn\r\n"
-     is 12, so an IP address pushes it over, so we're good. */
+     don't do a PEEK into the data, actually slurp up enough to be
+     "safe". Can't take it all because TLS-on-connect clients follow
+     immediately with TLS handshake. */

   ret = recv(fd, &hdr, PROXY_INITIAL_READ, 0);
   }
   while (ret == -1 && errno == EINTR);
   ret = recv(fd, &hdr, PROXY_INITIAL_READ, 0);
   }
   while (ret == -1 && errno == EINTR);


@@ -1054,21 +1099,22 @@ do
 if (ret == -1)
   goto proxyfail;
 
 if (ret == -1)
   goto proxyfail;
 

-if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0)
+/* For v2, handle reading the length, and then the rest. */
+if ((ret == PROXY_INITIAL_READ) && (memcmp(&hdr.v2, v2sig, sizeof(v2sig)) == 0))

   {
   {

-  uint8_t ver, cmd;
-  int ret2nd;
-
-  /* It's now safe to read the rest. */
-  do {
-    ret2nd = recv(fd, (uschar*)&hdr + ret, sizeof(hdr)-ret, 0);
-  } while (ret2nd == -1 && errno == EINTR);
-  if (ret2nd == -1)
+  int retmore;
+  uint8_t ver;
+
+  /* First get the length fields. */
+  do
+    {
+    retmore = recv(fd, (uschar*)&hdr + ret, PROXY_V2_HEADER_SIZE - PROXY_INITIAL_READ, 0);
+    } while (retmore == -1 && errno == EINTR);
+  if (retmore == -1)

     goto proxyfail;
     goto proxyfail;

-  ret += ret2nd;
+  ret += retmore;

 
   ver = (hdr.v2.ver_cmd & 0xf0) >> 4;
 
   ver = (hdr.v2.ver_cmd & 0xf0) >> 4;

-  cmd = (hdr.v2.ver_cmd & 0x0f);

 
   /* May 2014: haproxy combined the version and command into one byte to
      allow two full bytes for the length field in order to proxy SSL
 
   /* May 2014: haproxy combined the version and command into one byte to
      allow two full bytes for the length field in order to proxy SSL


@@ -1080,15 +1126,43 @@ if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0)
     DEBUG(D_receive) debug_printf("Invalid Proxy Protocol version: %d\n", ver);
     goto proxyfail;
     }
     DEBUG(D_receive) debug_printf("Invalid Proxy Protocol version: %d\n", ver);
     goto proxyfail;
     }

-  DEBUG(D_receive) debug_printf("Detected PROXYv2 header\n");
+

   /* The v2 header will always be 16 bytes per the spec. */
   size = 16 + ntohs(hdr.v2.len);
   /* The v2 header will always be 16 bytes per the spec. */
   size = 16 + ntohs(hdr.v2.len);

-  if (ret < size)
+  DEBUG(D_receive) debug_printf("Detected PROXYv2 header, size %d (limit %d)\n",
+      size, (int)sizeof(hdr));
+
+  /* We should now have 16 octets (PROXY_V2_HEADER_SIZE), and we know the total
+  amount that we need.  Double-check that the size is not unreasonable, then
+  get the rest. */
+  if (size > sizeof(hdr))

     {
     {

-    DEBUG(D_receive) debug_printf("Truncated or too large PROXYv2 header (%d/%d)\n",
-                                  ret, size);
+    DEBUG(D_receive) debug_printf("PROXYv2 header size unreasonably large; security attack?\n");

     goto proxyfail;
     }
     goto proxyfail;
     }

+
+  do
+    {
+    do
+      {
+      retmore = recv(fd, (uschar*)&hdr + ret, size-ret, 0);
+      } while (retmore == -1 && errno == EINTR);
+    if (retmore == -1)
+      goto proxyfail;
+    ret += retmore;
+    DEBUG(D_receive) debug_printf("PROXYv2: have %d/%d required octets\n", ret, size);
+    } while (ret < size);
+
+  } /* end scope for getting rest of data for v2 */
+
+/* At this point: if PROXYv2, we've read the exact size required for all data;
+if PROXYv1 then we've read "less than required for any valid line" and should
+read the rest". */
+
+if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0)
+  {
+  uint8_t cmd = (hdr.v2.ver_cmd & 0x0f);
+

   switch (cmd)
     {
     case 0x01: /* PROXY command */
   switch (cmd)
     {
     case 0x01: /* PROXY command */


@@ -1174,7 +1248,7 @@ else if (ret >= 8 && memcmp(hdr.v1.line, "PROXY", 5) == 0)
   char   *endc;
 
   /* get the rest of the line */
   char   *endc;
 
   /* get the rest of the line */

-  r2 = swallow_until_crlf(fd, (uschar*)&hdr + ret, sizeof(hdr)-ret);
+  r2 = swallow_until_crlf(fd, (uschar*)&hdr, ret, sizeof(hdr)-ret);

   if (r2 == -1)
     goto proxyfail;
   ret += r2;
   if (r2 == -1)
     goto proxyfail;
   ret += r2;


@@ -1182,7 +1256,7 @@ else if (ret >= 8 && memcmp(hdr.v1.line, "PROXY", 5) == 0)
   p = string_copy(hdr.v1.line);
   end = memchr(p, '\r', ret - 1);
 
   p = string_copy(hdr.v1.line);
   end = memchr(p, '\r', ret - 1);
 

-  if (!end || end[1] != '\n')
+  if (!end || (end == (uschar*)&hdr + ret) || end[1] != '\n')

     {
     DEBUG(D_receive) debug_printf("Partial or invalid PROXY header\n");
     goto proxyfail;
     {
     DEBUG(D_receive) debug_printf("Partial or invalid PROXY header\n");
     goto proxyfail;


@@ -1287,7 +1361,7 @@ else
   {
   /* Wrong protocol */
   DEBUG(D_receive) debug_printf("Invalid proxy protocol version negotiation\n");
   {
   /* Wrong protocol */
   DEBUG(D_receive) debug_printf("Invalid proxy protocol version negotiation\n");

-  (void) swallow_until_crlf(fd, (uschar*)&hdr + ret, sizeof(hdr)-ret);
+  (void) swallow_until_crlf(fd, (uschar*)&hdr, ret, sizeof(hdr)-ret);

   goto proxyfail;
   }
 
   goto proxyfail;
   }