New SMTP Transport option for simplified improved security for DANE.
option.
+.new
+.option dane_require_tls_ciphers smtp string&!! unset
+.cindex "TLS" "requiring specific ciphers for DANE"
+.cindex "cipher" "requiring specific"
+.cindex DANE "TLS ciphers"
+This option may be used to override &%tls_require_ciphers%& for connections
+where DANE has been determined to be in effect.
+If not set, then &%tls_require_ciphers%& will be used.
+Normal SMTP delivery is not able to make strong demands of TLS cipher
+configuration, because delivery will fall back to plaintext. Once DANE has
+been determined to be in effect, there is no plaintext fallback and making the
+TLS cipherlist configuration stronger will increase security, rather than
+counter-intuitively decreasing it.
+If the option expands to be empty or is forced to fail, then it will
+be treated as unset and &%tls_require_ciphers%& will be used instead.
+.wen
+
+
.option data_timeout smtp time 5m
This sets a timeout for the transmission of each block in the data portion of
the message. As a result, the overall timeout for a message depends on the size
to this server, its A record, its TLSA record and any associated CNAME records must all be covered by
DNSSEC.
2) add TLSA DNS records. These say what the server certificate for a TLS connection should be.
-3) offer a server certificate, or certificate chain, in TLS connections which is traceable to the one
-defined by (one of?) the TSLA records
+3) offer a server certificate, or certificate chain, in TLS connections which is is anchored by one of the TLSA records.
There are no changes to Exim specific to server-side operation of DANE.
Support for client-side operation of DANE can be included at compile time by defining SUPPORT_DANE=yes
those who use &%hosts_require_ocsp%&, should consider the interaction with DANE in their OCSP settings.
-For client-side DANE there are two new smtp transport options, &%hosts_try_dane%& and &%hosts_require_dane%&.
-The latter variant will result in failure if the target host is not DNSSEC-secured.
+For client-side DANE there are three new smtp transport options, &%hosts_try_dane%&, &%hosts_require_dane%&
+and &%dane_require_tls_ciphers%&.
+The require variant will result in failure if the target host is not DNSSEC-secured.
DANE will only be usable if the target host has DNSSEC-secured MX, A and TLSA records.
will be required for the host. If it does not, the host will not
be used; there is no fallback to non-DANE or non-TLS.
+If DANE is requested and usable, then the TLS cipher list configuration
+prefers to use the option &%dane_require_tls_ciphers%& and falls
+back to &%tls_require_ciphers%& only if that is unset.
+This lets you configure "decent crypto" for DANE and "better than nothing
+crypto" as the default. Note though that while GnuTLS lets the string control
+which versions of TLS/SSL will be negotiated, OpenSSL does not and you're
+limited to ciphersuite constraints.
+
If DANE is requested and useable (see above) the following transport options are ignored:
.code
hosts_require_tls
in defer=pass mode supply a 450 to the initiator. Previously the message
would be spooled.
+PP/02 DANE: add dane_require_tls_ciphers SMTP Transport option; if unset,
+ tls_require_ciphers is used as before.
+
Exim version 4.90
-----------------
2. DANE is now supported under GnuTLS version 3.0.0 or later. Both GnuTLS and
OpenSSL versions are moved to mainline support from Experimental.
+ New SMTP transport option "dane_require_tls_ciphers".
3. Feature macros for the compiled-in set of malware scanner interfaces.
daemon_smtp_ports string unset main 1.75 pluralised in 4.21
daemon_startup_retries int 9 main 4.52
daemon_startup_sleep time 30s main 4.52
+dane_require_tls_ciphers string* unset smtp 4.91
data string unset redirect 4.00
data_timeout time 5m smtp
debug_print string* unset authenticators 4.00
unset routers 4.00
unset transports 2.00
-debug_store boolean false main 4.90
+debug_store boolean false main 4.90
delay_after_cutoff boolean true smtp
delay_warning time list 24h main
delay_warning_condition string* + main 1.73
hosts_randomize boolean false manualroute 4.00
false smtp 3.14
hosts_require_auth host list unset smtp 4.00
+hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
hosts_require_tls host list unset smtp 3.20
hosts_treat_as_local domain list unset main 1.95
hosts_try_auth host list unset smtp 4.00
+hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
hosts_try_fastopen host list unset smtp 4.88
hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
ibase_servers string unset main 4.23
1, 0))
|| (rc = dane_verify_crt_raw(s, certlist, lsize,
gnutls_certificate_type_get(state->session),
- r, 0,
+ r, 0,
# ifdef GNUTLS_BROKEN_DANE_VALIDATION
usage == (1 << DANESSL_USAGE_DANE_EE)
? DANE_VFLAG_ONLY_CHECK_EE_USAGE : 0,
(smtp_transport_options_block *)tb->options_block;
int rc;
exim_gnutls_state_st * state = NULL;
+uschar *cipher_list = NULL;
#ifndef DISABLE_OCSP
BOOL require_ocsp =
verify_check_given_host(&ob->hosts_require_ocsp, host) == OK;
DEBUG(D_tls) debug_printf("initialising GnuTLS as a client on fd %d\n", fd);
+#ifdef SUPPORT_DANE
+if (tlsa_dnsa && ob->dane_require_tls_ciphers)
+ {
+ /* not using expand_check_tlsvar because not yet in state */
+ if (!expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
+ &cipher_list, errstr))
+ return DEFER;
+ cipher_list = cipher_list && *cipher_list
+ ? ob->dane_require_tls_ciphers : ob->tls_require_ciphers;
+ }
+#endif
+
+if (!cipher_list)
+ cipher_list = ob->tls_require_ciphers;
+
if ((rc = tls_init(host, ob->tls_certificate, ob->tls_privatekey,
ob->tls_sni, ob->tls_verify_certificates, ob->tls_crl,
- ob->tls_require_ciphers, &state, errstr)) != OK)
+ cipher_list, &state, errstr)) != OK)
return rc;
{
SNI handling.
Separately we might try to replace using OCSP_basic_verify() - which seems to not
-be a public interface into the OpenSSL library (there's no manual entry) -
+be a public interface into the OpenSSL library (there's no manual entry) -
But what with? We also use OCSP_basic_verify in the client stapling callback.
And there we NEED it; we must verify that status... unless the
library does it for us anyway? */
tls_out.certificate_verified = FALSE;
client_verify_callback_called = FALSE;
-if (!expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
- &expciphers, errstr))
+expciphers = NULL;
+#ifdef SUPPORT_DANE
+if (tlsa_dnsa)
+ {
+ /* We fall back to tls_require_ciphers if unset, empty or forced failure, but
+ other failures should be treated as problems. */
+ if (ob->dane_require_tls_ciphers &&
+ !expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
+ &expciphers, errstr))
+ return FAIL;
+ if (expciphers && *expciphers == '\0')
+ expciphers = NULL;
+ }
+#endif
+if (!expciphers &&
+ !expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
+ &expciphers, errstr))
return FAIL;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
(void *)offsetof(smtp_transport_options_block, connect_timeout) },
{ "connection_max_messages", opt_int | opt_public,
(void *)offsetof(transport_instance, connection_max_messages) },
+# ifdef SUPPORT_DANE
+ { "dane_require_tls_ciphers", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dane_require_tls_ciphers) },
+# endif
{ "data_timeout", opt_time,
(void *)offsetof(smtp_transport_options_block, data_timeout) },
{ "delay_after_cutoff", opt_bool,
#ifdef SUPPORT_DANE
.hosts_try_dane = NULL,
.hosts_require_dane = NULL,
+ .dane_require_tls_ciphers = NULL,
#endif
.hosts_try_fastopen = NULL,
#ifndef DISABLE_PRDR
#ifdef SUPPORT_DANE
uschar *hosts_try_dane;
uschar *hosts_require_dane;
+ uschar *dane_require_tls_ciphers;
#endif
uschar *hosts_try_fastopen;
#ifndef DISABLE_PRDR
--- /dev/null
+# Exim test configuration 5821
+# DANE/OpenSSL - ciphers option
+
+SERVER=
+OPT=
+
+.include DIR/aux-var/tls_conf_prefix
+
+primary_hostname = myhost.test.ex
+
+# ----- Main settings -----
+
+acl_smtp_rcpt = accept logwrite = "rcpt ACL"
+
+log_selector = +received_recipients +tls_peerdn +tls_certificate_verified
+
+tls_advertise_hosts = *
+
+# Set certificate only if server
+CDIR2 = DIR/aux-fixed/exim-ca/example.com/server1.example.com
+
+tls_certificate = ${if eq {SERVER}{server} {CDIR2/fullchain.pem}fail}
+tls_privatekey = ${if eq {SERVER}{server} {CDIR2/server1.example.com.unlocked.key}fail}
+
+# Permit two specific ciphers
+tls_require_ciphers = NONE:+VERS-TLS-ALL:+MAC-ALL:+RSA:+AES-128-CBC:+CAMELLIA-256-GCM:+SIGN-ALL:+COMP-NULL
+
+# ----- Routers -----
+begin routers
+
+client:
+ driver = dnslookup
+ condition = ${if eq {SERVER}{}}
+ ignore_target_hosts = <; 0::0/0
+ dnssec_request_domains = *
+ self = send
+ transport = send_to_server
+ errors_to = ""
+
+server:
+ driver = redirect
+ data = :blackhole:
+
+# ----- Transports -----
+begin transports
+
+send_to_server:
+ driver = smtp
+ allow_localhost
+ port = PORT_D
+ hosts_try_dane = *
+ tls_verify_certificates = CDIR2/ca_chain.pem
+
+ # Some commonly-available cipher, we hope
+ tls_require_ciphers = NONE:+VERS-TLS-ALL:+MAC-ALL:+RSA:+AES-128-CBC:+SIGN-ALL:+COMP-NULL
+ dane_require_tls_ciphers = OPT
+
+# ----- Retry -----
+begin retry
+* * F,5d,10s
+
+# End
--- /dev/null
+# Exim test configuration 5841
+# DANE/OpenSSL - ciphers option
+
+SERVER=
+OPT=
+
+.include DIR/aux-var/tls_conf_prefix
+
+primary_hostname = myhost.test.ex
+
+# ----- Main settings -----
+
+acl_smtp_rcpt = accept logwrite = "rcpt ACL"
+
+log_selector = +received_recipients +tls_peerdn +tls_certificate_verified
+
+tls_advertise_hosts = *
+
+# Set certificate only if server
+CDIR2 = DIR/aux-fixed/exim-ca/example.com/server1.example.com
+
+tls_certificate = ${if eq {SERVER}{server} {CDIR2/fullchain.pem}fail}
+tls_privatekey = ${if eq {SERVER}{server} {CDIR2/server1.example.com.unlocked.key}fail}
+
+# Permit two specific ciphers
+tls_require_ciphers = ECDHE-RSA-CAMELLIA256-SHA384:ECDHE-RSA-AES256-GCM-SHA384
+
+# ----- Routers -----
+begin routers
+
+client:
+ driver = dnslookup
+ condition = ${if eq {SERVER}{}}
+ ignore_target_hosts = <; 0::0/0
+ dnssec_request_domains = *
+ self = send
+ transport = send_to_server
+ errors_to = ""
+
+server:
+ driver = redirect
+ data = :blackhole:
+
+# ----- Transports -----
+begin transports
+
+send_to_server:
+ driver = smtp
+ allow_localhost
+ port = PORT_D
+ hosts_try_dane = *
+ tls_verify_certificates = CDIR2/ca_chain.pem
+
+ # Some commonly-available cipher, we hope
+ tls_require_ciphers = ECDHE-RSA-AES256-GCM-SHA384
+ dane_require_tls_ciphers = OPT
+
+# ----- Retry -----
+begin retry
+* * F,5d,10s
+
+# End
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmaX-0005vi-00 => CALLER@localhost.test.ex R=client T=send_to_server H=localhost.test.ex [127.0.0.1] X=TLS1.x:ke_RSA_AES_256_CBC_SHAnnn:256 CV=yes DN="CN=server1.example.com" C="250 OK id=10HmaY-0005vi-00"
+1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => CALLER@dane256ee.test.ex R=client T=send_to_server H=dane256ee.test.ex [ip4.ip4.ip4.ip4] X=TLS1.x:ke_RSA_AES_256_CBC_SHAnnn:256 CV=dane DN="CN=server1.example.com" C="250 OK id=10HmbA-0005vi-00"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmbB-0005vi-00 => CALLER@localhost.test.ex R=client T=send_to_server H=localhost.test.ex [127.0.0.1] X=TLS1.x:ke_RSA_AES_256_CBC_SHAnnn:256 CV=yes DN="CN=server1.example.com" C="250 OK id=10HmbC-0005vi-00"
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbD-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmbD-0005vi-00 => CALLER@dane256ee.test.ex R=client T=send_to_server H=dane256ee.test.ex [ip4.ip4.ip4.ip4] X=TLS1.2:RSA_CAMELLIA_256_GCM_SHA384:256 CV=dane DN="CN=server1.example.com" C="250 OK id=10HmbE-0005vi-00"
+1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
+
+******** SERVER ********
+1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= <> H=localhost (myhost.test.ex) [127.0.0.1] P=esmtps X=TLS1.x:ke_RSA_AES_256_CBC_SHAnnn:256 CV=no S=sss id=E10HmaX-0005vi-00@myhost.test.ex for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <CALLER@localhost.test.ex> R=server
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= <> H=the.local.host.name (myhost.test.ex) [ip4.ip4.ip4.ip4] P=esmtps X=TLS1.x:ke_RSA_AES_256_CBC_SHAnnn:256 CV=no S=sss id=E10HmaZ-0005vi-00@myhost.test.ex for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <CALLER@dane256ee.test.ex> R=server
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmbC-0005vi-00 <= <> H=localhost (myhost.test.ex) [127.0.0.1] P=esmtps X=TLS1.x:ke_RSA_AES_256_CBC_SHAnnn:256 CV=no S=sss id=E10HmbB-0005vi-00@myhost.test.ex for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmbC-0005vi-00 => :blackhole: <CALLER@localhost.test.ex> R=server
+1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmbE-0005vi-00 <= <> H=the.local.host.name (myhost.test.ex) [ip4.ip4.ip4.ip4] P=esmtps X=TLS1.2:RSA_CAMELLIA_256_GCM_SHA384:256 CV=no S=sss id=E10HmbD-0005vi-00@myhost.test.ex for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmbE-0005vi-00 => :blackhole: <CALLER@dane256ee.test.ex> R=server
+1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmaX-0005vi-00 => CALLER@localhost.test.ex R=client T=send_to_server H=localhost.test.ex [127.0.0.1] X=TLSv1:ke-RSA-AES256-SHA:xxx CV=yes DN="/CN=server1.example.com" C="250 OK id=10HmaY-0005vi-00"
+1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmaZ-0005vi-00 => CALLER@dane256ee.test.ex R=client T=send_to_server H=dane256ee.test.ex [ip4.ip4.ip4.ip4] X=TLSv1:ke-RSA-AES256-SHA:xxx CV=dane DN="/CN=server1.example.com" C="250 OK id=10HmbA-0005vi-00"
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmbB-0005vi-00 => CALLER@localhost.test.ex R=client T=send_to_server H=localhost.test.ex [127.0.0.1] X=TLSv1:ke-RSA-AES256-SHA:xxx CV=yes DN="/CN=server1.example.com" C="250 OK id=10HmbC-0005vi-00"
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbD-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmbD-0005vi-00 => CALLER@dane256ee.test.ex R=client T=send_to_server H=dane256ee.test.ex [ip4.ip4.ip4.ip4] X=TLSv1:ECDHE-RSA-CAMELLIA256-SHA384:256 CV=dane DN="/CN=server1.example.com" C="250 OK id=10HmbE-0005vi-00"
+1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
+
+******** SERVER ********
+1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port 1225
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= <> H=localhost (myhost.test.ex) [127.0.0.1] P=esmtps X=TLSv1:ke-RSA-AES256-SHA:xxx CV=no S=sss id=E10HmaX-0005vi-00@myhost.test.ex for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmaY-0005vi-00 => :blackhole: <CALLER@localhost.test.ex> R=server
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= <> H=the.local.host.name (myhost.test.ex) [ip4.ip4.ip4.ip4] P=esmtps X=TLSv1:ke-RSA-AES256-SHA:xxx CV=no S=sss id=E10HmaZ-0005vi-00@myhost.test.ex for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmbA-0005vi-00 => :blackhole: <CALLER@dane256ee.test.ex> R=server
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmbC-0005vi-00 <= <> H=localhost (myhost.test.ex) [127.0.0.1] P=esmtps X=TLSv1:ke-RSA-AES256-SHA:xxx CV=no S=sss id=E10HmbB-0005vi-00@myhost.test.ex for CALLER@localhost.test.ex
+1999-03-02 09:44:33 10HmbC-0005vi-00 => :blackhole: <CALLER@localhost.test.ex> R=server
+1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
+1999-03-02 09:44:33 "rcpt ACL"
+1999-03-02 09:44:33 10HmbE-0005vi-00 <= <> H=the.local.host.name (myhost.test.ex) [ip4.ip4.ip4.ip4] P=esmtps X=TLSv1:ECDHE-RSA-CAMELLIA256-SHA384:256 CV=no S=sss id=E10HmbD-0005vi-00@myhost.test.ex for CALLER@dane256ee.test.ex
+1999-03-02 09:44:33 10HmbE-0005vi-00 => :blackhole: <CALLER@dane256ee.test.ex> R=server
+1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
--- /dev/null
+# DANE client: ciphers option
+#
+gnutls
+exim -DSERVER=server -bd -oX PORT_D
+****
+
+### Baseline, dane unused
+exim -odf CALLER@localhost.test.ex
+Testing
+****
+### Baseline, dane used
+exim -odf CALLER@dane256ee.test.ex
+Testing
+****
+#
+#
+### Dane cipher specified, dane unused
+# Since dane unused, should get the same cipher as the baseline
+exim -odf -DOPT=NONE:+VERS-TLS-ALL:+MAC-ALL:+RSA:+CAMELLIA-256-GCM:+SIGN-ALL:+COMP-NULL CALLER@localhost.test.ex
+Testing
+****
+### Dane cipher specified, dane used
+# Should get the cipher specified here
+exim -odf -DOPT=NONE:+VERS-TLS-ALL:+MAC-ALL:+RSA:+CAMELLIA-256-GCM:+SIGN-ALL:+COMP-NULL CALLER@dane256ee.test.ex
+Testing
+****
+#
+#
+killdaemon
+no_msglog_check
--- /dev/null
+# DANE client: ciphers option
+#
+exim -DSERVER=server -bd -oX PORT_D
+****
+
+### Baseline, dane unused
+exim -odf CALLER@localhost.test.ex
+Testing
+****
+### Baseline, dane used
+exim -odf CALLER@dane256ee.test.ex
+Testing
+****
+#
+#
+### Dane cipher specified, dane unused
+# Since dane unused, should get the same cipher as the baseline
+exim -odf -DOPT=ECDHE-RSA-CAMELLIA256-SHA384 CALLER@localhost.test.ex
+Testing
+****
+### Dane cipher specified, dane used
+# Should get the cipher specified here
+exim -odf -DOPT=ECDHE-RSA-CAMELLIA256-SHA384 CALLER@dane256ee.test.ex
+Testing
+****
+#
+#
+killdaemon
+no_msglog_check
--- /dev/null
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
+
+******** SERVER ********
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
--- /dev/null
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
+
+******** SERVER ********
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
--- /dev/null
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
+
+******** SERVER ********
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
--- /dev/null
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
+
+******** SERVER ********
+### Baseline, dane unused
+### Baseline, dane used
+### Dane cipher specified, dane unused
+### Dane cipher specified, dane used
git://git.exim.org / users / heiko / exim.git / commitdiff