cache-hot. Previously, although the result was properly cached, the
initial verify call returned a defer.
+JH/21 Bug 2151 (partial):
+ Avoid using SIZE on the MAIL for a callout verify, on any but
+ the main verify for receipient in uncached-mode.
+
Exim version 4.89
-----------------
#ifdef SUPPORT_TLS
if (cutthrough.is_tls)
{
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
sending_ip_address = cutthrough.snd_ip;
sending_port = cutthrough.snd_port;
/* -MCD: set the smtp_use_dsn flag; this indicates that the host
that exim is connected to supports the esmtp extension DSN */
- case 'D': smtp_peer_options |= PEER_OFFERED_DSN; break;
+ case 'D': smtp_peer_options |= OPTION_DSN; break;
/* -MCG: set the queue name, to a non-default value */
/* -MCK: the peer offered CHUNKING. Must precede -MC */
- case 'K': smtp_peer_options |= PEER_OFFERED_CHUNKING; break;
+ case 'K': smtp_peer_options |= OPTION_CHUNKING; break;
/* -MCP: set the smtp_use_pipelining flag; this is useful only when
it preceded -MC (see above) */
- case 'P': smtp_peer_options |= PEER_OFFERED_PIPE; break;
+ case 'P': smtp_peer_options |= OPTION_PIPE; break;
/* -MCQ: pass on the pid of the queue-running process that started
this chain of deliveries and the fd of its synchronizing pipe; this
/* -MCS: set the smtp_use_size flag; this is useful only when it
precedes -MC (see above) */
- case 'S': smtp_peer_options |= PEER_OFFERED_SIZE; break;
+ case 'S': smtp_peer_options |= OPTION_SIZE; break;
#ifdef SUPPORT_TLS
/* -MCt: similar to -MCT below but the connection is still open
precedes -MC (see above). The flag indicates that the host to which
Exim is connected has offered TLS support. */
- case 'T': smtp_peer_options |= PEER_OFFERED_TLS; break;
+ case 'T': smtp_peer_options |= OPTION_TLS; break;
#endif
default: badarg = TRUE; break;
/* Codes for ESMTP facilities offered by peer */
-#define PEER_OFFERED_TLS BIT(0)
-#define PEER_OFFERED_IGNQ BIT(1)
-#define PEER_OFFERED_PRDR BIT(2)
-#define PEER_OFFERED_UTF8 BIT(3)
-#define PEER_OFFERED_DSN BIT(4)
-#define PEER_OFFERED_PIPE BIT(5)
-#define PEER_OFFERED_SIZE BIT(6)
-#define PEER_OFFERED_CHUNKING BIT(7)
+#define OPTION_TLS BIT(0)
+#define OPTION_IGNQ BIT(1)
+#define OPTION_PRDR BIT(2)
+#define OPTION_UTF8 BIT(3)
+#define OPTION_DSN BIT(4)
+#define OPTION_PIPE BIT(5)
+#define OPTION_SIZE BIT(6)
+#define OPTION_CHUNKING BIT(7)
/* Argument for *_getc */
argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, &i, FALSE, 0);
if (smtp_authenticated) argv[i++] = US"-MCA";
-if (smtp_peer_options & PEER_OFFERED_CHUNKING) argv[i++] = US"-MCK";
-if (smtp_peer_options & PEER_OFFERED_DSN) argv[i++] = US"-MCD";
-if (smtp_peer_options & PEER_OFFERED_PIPE) argv[i++] = US"-MCP";
-if (smtp_peer_options & PEER_OFFERED_SIZE) argv[i++] = US"-MCS";
+if (smtp_peer_options & OPTION_CHUNKING) argv[i++] = US"-MCK";
+if (smtp_peer_options & OPTION_DSN) argv[i++] = US"-MCD";
+if (smtp_peer_options & OPTION_PIPE) argv[i++] = US"-MCP";
+if (smtp_peer_options & OPTION_SIZE) argv[i++] = US"-MCS";
#ifdef SUPPORT_TLS
-if (smtp_peer_options & PEER_OFFERED_TLS)
+if (smtp_peer_options & OPTION_TLS)
if (tls_out.active >= 0 || continue_proxy_cipher)
{
argv[i++] = US"-MCt";
size_t bsize = Ustrlen(buf);
#ifdef SUPPORT_TLS
-if ( checks & PEER_OFFERED_TLS
+if ( checks & OPTION_TLS
&& pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_TLS;
+ checks &= ~OPTION_TLS;
#endif
-if ( checks & PEER_OFFERED_IGNQ
+if ( checks & OPTION_IGNQ
&& pcre_exec(regex_IGNOREQUOTA, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_IGNQ;
+ checks &= ~OPTION_IGNQ;
-if ( checks & PEER_OFFERED_CHUNKING
+if ( checks & OPTION_CHUNKING
&& pcre_exec(regex_CHUNKING, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_CHUNKING;
+ checks &= ~OPTION_CHUNKING;
#ifndef DISABLE_PRDR
-if ( checks & PEER_OFFERED_PRDR
+if ( checks & OPTION_PRDR
&& pcre_exec(regex_PRDR, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PRDR;
+ checks &= ~OPTION_PRDR;
#endif
#ifdef SUPPORT_I18N
-if ( checks & PEER_OFFERED_UTF8
+if ( checks & OPTION_UTF8
&& pcre_exec(regex_UTF8, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_UTF8;
+ checks &= ~OPTION_UTF8;
#endif
-if ( checks & PEER_OFFERED_DSN
+if ( checks & OPTION_DSN
&& pcre_exec(regex_DSN, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_DSN;
+ checks &= ~OPTION_DSN;
-if ( checks & PEER_OFFERED_PIPE
+if ( checks & OPTION_PIPE
&& pcre_exec(regex_PIPELINING, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PIPE;
+ checks &= ~OPTION_PIPE;
-if ( checks & PEER_OFFERED_SIZE
+if ( checks & OPTION_SIZE
&& pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_SIZE;
+ checks &= ~OPTION_SIZE;
return checks;
}
if ((sx->max_rcpt = sx->tblock->max_addresses) == 0) sx->max_rcpt = 999999;
sx->peer_offered = 0;
+sx->avoid_option = 0;
sx->igquotstr = US"";
if (!sx->helo_data) sx->helo_data = sx->ob->helo_data;
#ifdef EXPERIMENTAL_DSN_INFO
#ifdef SUPPORT_TLS
if (sx->smtps)
{
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
suppress_tls = FALSE;
sx->ob->tls_tempfail_tryclear = FALSE;
smtp_command = US"SSL-on-connect";
}
}
- sx->peer_offered = smtp_peer_options = 0;
+ sx->avoid_option = sx->peer_offered = smtp_peer_options = 0;
if (sx->esmtp || sx->lmtp)
{
sx->peer_offered = ehlo_response(sx->buffer,
- PEER_OFFERED_TLS /* others checked later */
+ OPTION_TLS /* others checked later */
);
/* Set tls_offered if the response to EHLO specifies support for STARTTLS. */
#ifdef SUPPORT_TLS
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_TLS;
+ smtp_peer_options |= sx->peer_offered & OPTION_TLS;
#endif
}
}
)
{
sx->peer_offered = smtp_peer_options;
- pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
+ pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
HDEBUG(D_transport) debug_printf("continued connection, %s TLS\n",
continue_proxy_cipher ? "proxied" : "verify conn with");
return OK;
for error analysis. */
#ifdef SUPPORT_TLS
-if ( smtp_peer_options & PEER_OFFERED_TLS
+if ( smtp_peer_options & OPTION_TLS
&& !suppress_tls
&& verify_check_given_host(&sx->ob->hosts_avoid_tls, sx->host) != OK
&& ( !sx->verify
{
errno = ERRNO_TLSREQUIRED;
message = string_sprintf("a TLS session is required, but %s",
- smtp_peer_options & PEER_OFFERED_TLS
+ smtp_peer_options & OPTION_TLS
? "an attempt to start TLS failed" : "the server did not offer TLS support");
goto TLS_FAILED;
}
{
sx->peer_offered = ehlo_response(sx->buffer,
0 /* no TLS */
- | (sx->lmtp && sx->ob->lmtp_ignore_quota ? PEER_OFFERED_IGNQ : 0)
- | PEER_OFFERED_CHUNKING
- | PEER_OFFERED_PRDR
+ | (sx->lmtp && sx->ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
+ | OPTION_CHUNKING
+ | OPTION_PRDR
#ifdef SUPPORT_I18N
- | (sx->addrlist->prop.utf8_msg ? PEER_OFFERED_UTF8 : 0)
+ | (sx->addrlist->prop.utf8_msg ? OPTION_UTF8 : 0)
/*XXX if we hand peercaps on to continued-conn processes,
must not depend on this addr */
#endif
- | PEER_OFFERED_DSN
- | PEER_OFFERED_PIPE
- | (sx->ob->size_addition >= 0 ? PEER_OFFERED_SIZE : 0)
+ | OPTION_DSN
+ | OPTION_PIPE
+ | (sx->ob->size_addition >= 0 ? OPTION_SIZE : 0)
);
/* Set for IGNOREQUOTA if the response to LHLO specifies support and the
lmtp_ignore_quota option was set. */
- sx->igquotstr = sx->peer_offered & PEER_OFFERED_IGNQ ? US" IGNOREQUOTA" : US"";
+ sx->igquotstr = sx->peer_offered & OPTION_IGNQ ? US" IGNOREQUOTA" : US"";
/* If the response to EHLO specified support for the SIZE parameter, note
this, provided size_addition is non-negative. */
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_SIZE;
+ smtp_peer_options |= sx->peer_offered & OPTION_SIZE;
/* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
the current host, esmtp will be false, so PIPELINING can never be used. If
the current host matches hosts_avoid_pipelining, don't do it. */
- if ( sx->peer_offered & PEER_OFFERED_PIPE
+ if ( sx->peer_offered & OPTION_PIPE
&& verify_check_given_host(&sx->ob->hosts_avoid_pipelining, sx->host) != OK)
- smtp_peer_options |= PEER_OFFERED_PIPE;
+ smtp_peer_options |= OPTION_PIPE;
DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
- smtp_peer_options & PEER_OFFERED_PIPE ? "" : "not ");
+ smtp_peer_options & OPTION_PIPE ? "" : "not ");
- if ( sx->peer_offered & PEER_OFFERED_CHUNKING
+ if ( sx->peer_offered & OPTION_CHUNKING
&& verify_check_given_host(&sx->ob->hosts_try_chunking, sx->host) != OK)
- sx->peer_offered &= ~PEER_OFFERED_CHUNKING;
+ sx->peer_offered &= ~OPTION_CHUNKING;
- if (sx->peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx->peer_offered & OPTION_CHUNKING)
{DEBUG(D_transport) debug_printf("CHUNKING usable\n");}
#ifndef DISABLE_PRDR
- if ( sx->peer_offered & PEER_OFFERED_PRDR
+ if ( sx->peer_offered & OPTION_PRDR
&& verify_check_given_host(&sx->ob->hosts_try_prdr, sx->host) != OK)
- sx->peer_offered &= ~PEER_OFFERED_PRDR;
+ sx->peer_offered &= ~OPTION_PRDR;
- if (sx->peer_offered & PEER_OFFERED_PRDR)
+ if (sx->peer_offered & OPTION_PRDR)
{DEBUG(D_transport) debug_printf("PRDR usable\n");}
#endif
/* Note if the server supports DSN */
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_DSN;
+ smtp_peer_options |= sx->peer_offered & OPTION_DSN;
DEBUG(D_transport) debug_printf("%susing DSN\n",
- sx->peer_offered & PEER_OFFERED_DSN ? "" : "not ");
+ sx->peer_offered & OPTION_DSN ? "" : "not ");
/* Note if the response to EHLO specifies support for the AUTH extension.
If it has, check that this host is one we want to authenticate to, and do
}
}
}
-pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
+pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
/* The setting up of the SMTP call is now complete. Any subsequent errors are
message-specific. */
}
/* If this is an international message we need the host to speak SMTPUTF8 */
-if (sx->utf8_needed && !(sx->peer_offered & PEER_OFFERED_UTF8))
+if (sx->utf8_needed && !(sx->peer_offered & OPTION_UTF8))
{
errno = ERRNO_UTF8_FWD;
goto RESPONSE_FAILED;
*p = 0;
-/* If we know the receiving MTA supports the SIZE qualification,
+/* If we know the receiving MTA supports the SIZE qualification, and we know it,
send it, adding something to the message size to allow for imprecision
and things that get added en route. Exim keeps the number of lines
in a message, so we can give an accurate value for the original message, but we
need some additional to handle added headers. (Double "." characters don't get
included in the count.) */
-if (sx->peer_offered & PEER_OFFERED_SIZE)
+if ( message_size > 0
+ && sx->peer_offered & OPTION_SIZE && !(sx->avoid_option & OPTION_SIZE))
{
/*XXX problem here under spool_files_wireformat?
Or just forget about lines? Or inflate by a fixed proportion? */
request that */
sx->prdr_active = FALSE;
-if (sx->peer_offered & PEER_OFFERED_PRDR)
+if (sx->peer_offered & OPTION_PRDR)
for (addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{
/* If it supports internationalised messages, and this meesage need that,
request it */
-if ( sx->peer_offered & PEER_OFFERED_UTF8
+if ( sx->peer_offered & OPTION_UTF8
&& addrlist->prop.utf8_msg
&& !addrlist->prop.utf8_downcvt
)
/* Add any DSN flags to the mail command */
-if (sx->peer_offered & PEER_OFFERED_DSN && !sx->dsn_all_lasthop)
+if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop)
{
if (dsn_ret == dsn_ret_hdrs)
{ Ustrcpy(p, " RET=HDRS"); p += 9; }
/* Add any DSN flags to the rcpt command */
-if (sx->peer_offered & PEER_OFFERED_DSN && !(addr->dsn_flags & rf_dsnlasthop))
+if (sx->peer_offered & OPTION_DSN && !(addr->dsn_flags & rf_dsnlasthop))
{
if (addr->dsn_flags & rf_dsnflags)
{
the delivery log line. */
if ( sx->addrlist->prop.utf8_msg
- && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & PEER_OFFERED_UTF8))
+ && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & OPTION_UTF8))
)
{
if (s = string_address_utf8_to_alabel(s, &errstr), errstr)
BOOL no_flush;
uschar * rcpt_addr;
- addr->dsn_aware = sx->peer_offered & PEER_OFFERED_DSN
+ addr->dsn_aware = sx->peer_offered & OPTION_DSN
? dsn_support_yes : dsn_support_no;
address_count++;
if ( transport_filter_argv
&& *transport_filter_argv
&& **transport_filter_argv
- && sx.peer_offered & PEER_OFFERED_CHUNKING
+ && sx.peer_offered & OPTION_CHUNKING
)
{
- sx.peer_offered &= ~PEER_OFFERED_CHUNKING;
+ sx.peer_offered &= ~OPTION_CHUNKING;
DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n");
}
}
If using CHUNKING, do not send a BDAT until we know how big a chunk we want
to send is. */
-if ( !(sx.peer_offered & PEER_OFFERED_CHUNKING)
+if ( !(sx.peer_offered & OPTION_CHUNKING)
&& (sx.ok || (pipelining_active && !mua_wrapper)))
{
int count = smtp_write_command(&sx.outblock, SCMD_FLUSH, "DATA\r\n");
well as body. Set the appropriate timeout value to be used for each chunk.
(Haven't been able to make it work using select() for writing yet.) */
-if (!(sx.peer_offered & PEER_OFFERED_CHUNKING) && !sx.ok)
+if (!(sx.peer_offered & OPTION_CHUNKING) && !sx.ok)
{
/* Save the first address of the next batch. */
sx.first_addr = sx.next_addr;
of responses. The callback needs a whole bunch of state so set up
a transport-context structure to be passed around. */
- if (sx.peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx.peer_offered & OPTION_CHUNKING)
{
tctx.check_string = tctx.escape_string = NULL;
tctx.options |= topt_use_bdat;
transport_write_timeout = sx.ob->data_timeout;
smtp_command = US"sending data block"; /* For error messages */
DEBUG(D_transport|D_v)
- if (sx.peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx.peer_offered & OPTION_CHUNKING)
debug_printf(" will write message using CHUNKING\n");
else
debug_printf(" SMTP>> writing message and terminating \".\"\n");
smtp_command = US"end of data";
- if (sx.peer_offered & PEER_OFFERED_CHUNKING && sx.cmd_count > 1)
+ if (sx.peer_offered & OPTION_CHUNKING && sx.cmd_count > 1)
{
/* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
switch(sync_responses(&sx, sx.cmd_count-1, 0))
#ifndef DISABLE_PRDR
if (sx.prdr_active) addr->flags |= af_prdr_used;
#endif
- if (sx.peer_offered & PEER_OFFERED_CHUNKING) addr->flags |= af_chunking_used;
+ if (sx.peer_offered & OPTION_CHUNKING) addr->flags |= af_chunking_used;
flag = '-';
#ifndef DISABLE_PRDR
{
/* Set up a pipe for proxying TLS for the new transport process */
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
if (sx.ok = (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0))
socket_fd = pfd[1];
else
int cmd_count;
uschar peer_offered;
+ uschar avoid_option;
uschar * igquotstr;
uschar * helo_data;
#ifdef EXPERIMENTAL_DSN_INFO
postmaster-verify.
The sync_responses() would need to be taught about it and we'd
need another return code filtering out to here.
+
+ Avoid using a SIZE option on the MAIL for all randon-rcpt checks.
*/
+ sx.avoid_option = OPTION_SIZE;
+
/* Remember when we last did a random test */
new_domain_record.random_stamp = time(NULL);
yield = OK; /* Only usable result we can return */
done = TRUE;
goto no_conn;
- case FAIL:
+ case FAIL: /* the preferred result */
new_domain_record.random_result = ccache_reject;
+ sx.avoid_option = 0;
/* Between each check, issue RSET, because some servers accept only
one recipient after MAIL FROM:<>.
else
done = TRUE;
- /* Main verify. If the host is accepting all local parts, as determined
- by the "random" check, we don't need to waste time doing any further
- checking. */
+ /* Main verify. For rcpt-verify use SIZE if we know it and we're not cacheing;
+ for sndr-verify never use it. */
if (done)
{
+ if (!(options & vopt_is_recipient && options & vopt_callout_no_cache))
+ sx.avoid_option = OPTION_SIZE;
+
done = FALSE;
switch(smtp_write_mail_and_rcpt_cmds(&sx, &yield))
{
case PENDING_OK: done = TRUE;
new_address_record.result = ccache_accept;
break;
- case FAIL: done = TRUE;
+ case FAIL: done = TRUE;
yield = FAIL;
*failure_ptr = US"recipient";
new_address_record.result = ccache_reject;
break;
- default: break;
+ default: break;
}
break;
sx.ok = FALSE;
sx.send_rset = TRUE;
sx.completed_addr = FALSE;
+ sx.avoid_option = OPTION_SIZE;
if( smtp_write_mail_and_rcpt_cmds(&sx, &yield) == 0
&& addr->transport_return == PENDING_OK
!verify = sender/callout=no_cache
deny hosts = V4NET.0.0.3
!verify = recipient/callout=no_cache
+ deny hosts = V4NET.0.0.7
+ !verify = recipient/callout=no_cache,use_sender,random
deny hosts = V4NET.0.0.5
!verify = sender/callout=no_cache/check_postmaster
deny hosts = V4NET.0.0.6
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost1>: 550 Don't like postmaster
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: Sender verify failed
+1999-03-02 09:44:33 H=(me) [V4NET.0.0.3] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+1999-03-02 09:44:33 H=(me) [V4NET.0.0.3] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+1999-03-02 09:44:33 H=(me) [V4NET.0.0.7] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.lmtp>: 550 Recipient not liked
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : Remote host closed connection in response to initial connection
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root sender verify fail for <ok@localhost1>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<postmaster@localhost1>: 550 Don't like postmaster
1999-03-02 09:44:33 H=[V4NET.0.0.5] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: Sender verify failed
+1999-03-02 09:44:33 H=(me) [V4NET.0.0.3] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+1999-03-02 09:44:33 H=(me) [V4NET.0.0.3] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+1999-03-02 09:44:33 H=(me) [V4NET.0.0.7] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
1999-03-02 09:44:33 H=[V4NET.0.0.3] U=root F=<uncheckable@localhost1> rejected RCPT <z@remote.lmtp>: 127.0.0.1 [127.0.0.1] : SMTP error from remote mail server after RCPT TO:<z@remote.lmtp>: 550 Recipient not liked
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root sender verify defer for <bad@localhost1>: Could not complete sender verify callout: 127.0.0.1 [127.0.0.1] : Remote host closed connection in response to initial connection
1999-03-02 09:44:33 H=[V4NET.0.0.1] U=root F=<bad@localhost1> temporarily rejected RCPT <z@test.ex>: Could not complete sender verify callout
QUIT
250 OK
****
+# sender
sudo exim -v -bs -oMa V4NET.0.0.1
MAIL FROM:<ok@localhost>
RCPT TO:<z@test.ex>
QUIT
****
+# sender, no callout
sudo exim -v -bs -oMa V4NET.0.0.2
MAIL FROM:<unchecked@localhost>
RCPT TO:<z@test.ex>
QUIT
250 OK
****
+# sender, refused
sudo exim -v -bs -oMa V4NET.0.0.1
MAIL FROM:<bad@localhost>
RCPT TO:<z@test.ex>
QUIT
250 OK
****
+# sender, tmperr
sudo exim -v -bs -oMa V4NET.0.0.1
MAIL FROM:<uncheckable@localhost1>
RCPT TO:<z@test.ex>
QUIT
250 OK
****
+# sender, err on mailfrom
sudo exim -v -bs -oMa V4NET.0.0.1
MAIL FROM:<uncheckable2@localhost1>
RCPT TO:<z@test.ex>
QUIT
250 OK
****
+# sender, err on mailfrom
sudo exim -v -bs -oMa V4NET.0.0.1
MAIL FROM:<uncheckable@localhost1>
RCPT TO:<z@test.ex>
QUIT
250 OK
****
+# recipient, refused
sudo exim -v -bs -oMa V4NET.0.0.3
MAIL FROM:<uncheckable@localhost1>
RCPT TO:<z@remote.domain>
QUIT
250 OK
****
+# recipient, refused
sudo exim -v -bs -oMa V4NET.0.0.3
MAIL FROM:<uncheckable@localhost1>
RCPT TO:<z@remote.domain>
QUIT
****
+# recipient, no conneect
sudo exim -v -bs -oMa V4NET.0.0.3
MAIL FROM:<uncheckable@localhost1>
RCPT TO:<z@remote.domain>
server PORT_S
220 Server ready
EHLO
-250- wotcher
+250- wotcher sverifier
250-SIZE
250 OK
-MAIL FROM
+MAIL FROM:<>
250 OK
RCPT TO
250 OK
QUIT
250 OK
****
+# sender, size known, tgt supports sixe
sudo exim -v -bs -oMa V4NET.0.0.6
EHLO me
MAIL FROM:<ok@localhost1> SIZE=420000
#
server PORT_S
220 Server ready
+EHLO
+250- wotcher rverifier
+250-SIZE
+250 OK
+MAIL FROM:<> SIZE=
+250 OK
+RCPT TO
+250 OK
+QUIT
+250 OK
+****
+# receipient, size known, tgt supports size
+sudo exim -v -bs -oMa V4NET.0.0.3
+EHLO me
+MAIL FROM:<ok@localhost1> SIZE=420000
+RCPT TO:<z@remote.domain>
+QUIT
+****
+#
+server PORT_S
+220 Server ready
+EHLO
+250- wotcher rverifier
+250-SIZE
+250 OK
+MAIL FROM:<>
+250 OK
+RCPT TO
+250 OK
+QUIT
+250 OK
+****
+# receipient, size unknown, tgt supports size
+sudo exim -v -bs -oMa V4NET.0.0.3
+EHLO me
+MAIL FROM:<ok@localhost1>
+RCPT TO:<z@remote.domain>
+QUIT
+****
+#
+server PORT_S
+220 Server ready
+EHLO
+250- wotcher rverifier
+250-SIZE
+250 OK
+MAIL FROM:<ok@localhost1>
+250 OK
+RCPT TO:<myhost.test.ex-
+550 RANDOM NOT OK
+RSET
+250 OK
+MAIL FROM:<ok@localhost1> SIZE=
+250 OK
+RCPT TO:<z@remote.domain>
+250 OK
+QUIT
+250 OK
+****
+# receipient, size known, tgt supports size, use_sender, w/random
+# stdout should see SIZE on the main but not on the random receipient's MAIL FROM
+sudo exim -v -bs -oMa V4NET.0.0.7
+EHLO me
+MAIL FROM:<ok@localhost1> SIZE=420000
+RCPT TO:<z@remote.domain>
+QUIT
+****
+#
+server PORT_S
+220 Server ready
LHLO
250 OK
MAIL FROM
Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
SMTP<< 220 Server ready
SMTP>> EHLO myhost.test.ex
- SMTP<< 250- wotcher
+ SMTP<< 250- wotcher sverifier
250-SIZE
250 OK
- SMTP>> MAIL FROM:<> SIZE=ssss
+ SMTP>> MAIL FROM:<>
SMTP<< 250 OK
SMTP>> RCPT TO:<ok@localhost1>
SMTP<< 250 OK
SMTP connection from root closed by QUIT
LOG: smtp_connection MAIN
SMTP connection from root
+Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+ SMTP<< 250- wotcher rverifier
+ 250-SIZE
+ 250 OK
+ SMTP>> MAIL FROM:<> SIZE=ssss
+ SMTP<< 250 OK
+ SMTP>> RCPT TO:<z@remote.domain>
+ SMTP<< 250 OK
+ SMTP>> QUIT
+ SMTP<< 250 OK
+ SMTP(close)>>
+LOG: MAIN REJECT
+ H=(me) [V4NET.0.0.3] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+LOG: smtp_connection MAIN
+ SMTP connection from root
+Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+ SMTP<< 250- wotcher rverifier
+ 250-SIZE
+ 250 OK
+ SMTP>> MAIL FROM:<>
+ SMTP<< 250 OK
+ SMTP>> RCPT TO:<z@remote.domain>
+ SMTP<< 250 OK
+ SMTP>> QUIT
+ SMTP<< 250 OK
+ SMTP(close)>>
+LOG: MAIN REJECT
+ H=(me) [V4NET.0.0.3] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+LOG: smtp_connection MAIN
+ SMTP connection from root
+Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+ SMTP<< 250- wotcher rverifier
+ 250-SIZE
+ 250 OK
+ SMTP>> MAIL FROM:<ok@localhost1>
+ SMTP<< 250 OK
+ SMTP>> RCPT TO:<myhost.test.ex-dddddddd-testing@remote.domain>
+ SMTP<< 550 RANDOM NOT OK
+ SMTP>> RSET
+ SMTP<< 250 OK
+ SMTP>> MAIL FROM:<ok@localhost1> SIZE=ssss
+ SMTP<< 250 OK
+ SMTP>> RCPT TO:<z@remote.domain>
+ SMTP<< 250 OK
+ SMTP>> QUIT
+ SMTP<< 250 OK
+ SMTP(close)>>
+LOG: MAIN REJECT
+ H=(me) [V4NET.0.0.7] U=root F=<ok@localhost1> rejected RCPT <z@remote.domain>: relay not permitted
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+LOG: smtp_connection MAIN
+ SMTP connection from root
Connecting to 127.0.0.1 [127.0.0.1]:1224 ... connected
SMTP<< 220 Server ready
SMTP>> LHLO myhost.test.ex
250 HELP
using PIPELINING
not using DSN
- SMTP>> MAIL FROM:<usera@ok.example> SIZE=ssss
+ SMTP>> MAIL FROM:<usera@ok.example>
SMTP>> RCPT TO:<userb@test.ex>
cmd buf flush ddd bytes
SMTP<< 250 OK
250 HELP
using PIPELINING
not using DSN
- SMTP>> MAIL FROM:<usera@ok.example> SIZE=ssss
+ SMTP>> MAIL FROM:<usera@ok.example>
SMTP>> RCPT TO:<userb@test.ex>
cmd buf flush ddd bytes
SMTP<< 250 OK
using PIPELINING
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
- SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex>
SMTP>> RCPT TO:<userx@domain.com>
cmd buf flush ddd bytes
SMTP<< 250 OK
using PIPELINING
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
- SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex>
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
SMTP<< 250 OK
using PIPELINING
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
- SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex>
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
SMTP<< 250 OK
using PIPELINING
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
- SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex>
SMTP>> RCPT TO:<userx@domain.com>
cmd buf flush ddd bytes
SMTP<< 250 OK
using PIPELINING
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
- SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex>
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
SMTP<< 250 OK
using PIPELINING
not using DSN
127.0.0.1 in hosts_require_auth? no (option unset)
- SMTP>> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
+ SMTP>> MAIL FROM:<CALLER@myhost.test.ex>
SMTP>> RCPT TO:<usery@domain.com>
cmd buf flush ddd bytes
SMTP<< 250 OK
>>> 250 HELP
>>> ip4.ip4.ip4.ip4 in hosts_avoid_pipelining? no (option unset)
>>> ip4.ip4.ip4.ip4 in hosts_require_auth? no (option unset)
->>> SMTP>> MAIL FROM:<> SIZE=ssss
+>>> SMTP>> MAIL FROM:<>
>>> SMTP>> RCPT TO:<rcptuser@dane256ee.test.ex>
->>> cmd buf flush 62 bytes
+>>> cmd buf flush 52 bytes
>>> SMTP<< 250 OK
>>> SMTP<< 250 Accepted
>>> SMTP>> QUIT
250 Accepted\r
221 myhost.test.ex closing connection\r
220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello root at me [V4NET.0.0.3]\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+550 relay not permitted\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello root at me [V4NET.0.0.3]\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+550 relay not permitted\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250-myhost.test.ex Hello root at me [V4NET.0.0.7]\r
+250-SIZE 52428800\r
+250-8BITMIME\r
+250-PIPELINING\r
+250 HELP\r
+250 OK\r
+550 relay not permitted\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
250 OK\r
550-Callout verification failed:\r
550 550 Recipient not liked\r
Connection request from [127.0.0.1]
220 Server ready
EHLO myhost.test.ex
-250- wotcher
+250- wotcher sverifier
250-SIZE
250 OK
-MAIL FROM:<> SIZE=ssss
+MAIL FROM:<>
250 OK
RCPT TO:<ok@localhost1>
250 OK
Listening on port 1224 ...
Connection request from [127.0.0.1]
220 Server ready
+EHLO myhost.test.ex
+250- wotcher rverifier
+250-SIZE
+250 OK
+MAIL FROM:<> SIZE=ssss
+250 OK
+RCPT TO:<z@remote.domain>
+250 OK
+QUIT
+250 OK
+End of script
+Listening on port 1224 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250- wotcher rverifier
+250-SIZE
+250 OK
+MAIL FROM:<>
+250 OK
+RCPT TO:<z@remote.domain>
+250 OK
+QUIT
+250 OK
+End of script
+Listening on port 1224 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250- wotcher rverifier
+250-SIZE
+250 OK
+MAIL FROM:<ok@localhost1>
+250 OK
+RCPT TO:<myhost.test.ex-dddddddd-testing@remote.domain>
+550 RANDOM NOT OK
+RSET
+250 OK
+MAIL FROM:<ok@localhost1> SIZE=ssss
+250 OK
+RCPT TO:<z@remote.domain>
+250 OK
+QUIT
+250 OK
+End of script
+Listening on port 1224 ...
+Connection request from [127.0.0.1]
+220 Server ready
LHLO myhost.test.ex
250 OK
MAIL FROM:<>
git://git.exim.org / users / heiko / exim.git / commitdiff