}
if (message_id[0] == 0) continue; /* No message was accepted */
}
- else
+ else /* bad smtp_setup_msg() */
{
if (smtp_out)
{
{
pid_t dpid;
- /* Before forking, ensure that the C output buffer is flushed. Otherwise
- anything that it in it will get duplicated, leading to duplicate copies
- of the pending output. */
-
- mac_smtp_fflush();
+ /* We used to flush smtp_out before forking so that buffered data was not
+ duplicated, but now we want to pipeline the responses for data and quit.
+ Instead, hard-close the fd underlying smtp_out right after fork to discard
+ the data buffer. */
if ((dpid = exim_fork(US"daemon-accept-delivery")) == 0)
{
(void)fclose(smtp_in);
+ (void)close(fileno(smtp_out));
(void)fclose(smtp_out);
/* Don't ever molest the parent's SSL connection, but do clean up
}
-uschar *
-deliver_get_sender_address (uschar * id)
-{
-int rc;
-uschar * new_sender_address,
- * save_sender_address;
-BOOL save_qr = f.queue_running;
-uschar * spoolname;
-
-/* make spool_open_datafile non-noisy on fail */
-
-f.queue_running = TRUE;
-
-/* Side effect: message_subdir is set for the (possibly split) spool directory */
-
-deliver_datafile = spool_open_datafile(id);
-f.queue_running = save_qr;
-if (deliver_datafile < 0)
- return NULL;
-
-/* Save and restore the global sender_address. I'm not sure if we should
-not save/restore all the other global variables too, because
-spool_read_header() may change all of them. But OTOH, when this
-deliver_get_sender_address() gets called, the current message is done
-already and nobody needs the globals anymore. (HS12, 2015-08-21) */
-
-spoolname = string_sprintf("%s-H", id);
-save_sender_address = sender_address;
-
-rc = spool_read_header(spoolname, TRUE, TRUE);
-
-new_sender_address = sender_address;
-sender_address = save_sender_address;
-
-if (rc != spool_read_OK)
- return NULL;
-
-assert(new_sender_address);
-
-(void)close(deliver_datafile);
-deliver_datafile = -1;
-
-return new_sender_address;
-}
-
-
void
delivery_re_exec(int exec_type)
# endif
extern int tls_read(void *, uschar *, size_t);
extern int tls_server_start(uschar **);
+extern void tls_shutdown_wr(void *);
extern BOOL tls_smtp_buffered(void);
extern int tls_ungetc(int);
#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
extern int deliver_split_address(address_item *);
extern void deliver_succeeded(address_item *);
-extern uschar *deliver_get_sender_address (uschar *id);
extern void delivery_re_exec(int);
extern void die_tainted(const uschar *, const uschar *, int);
extern int spool_open_datafile(uschar *);
extern int spool_open_temp(uschar *);
extern int spool_read_header(uschar *, BOOL, BOOL);
+extern uschar *spool_sender_from_msgid(const uschar *);
extern int spool_write_header(uschar *, int, uschar **);
extern int stdin_getc(unsigned);
extern int stdin_feof(void);
/* Options for transport_write_message */
-#define topt_add_return_path 0x001
-#define topt_add_delivery_date 0x002
-#define topt_add_envelope_to 0x004
-#define topt_use_crlf 0x008 /* Terminate lines with CRLF */
-#define topt_end_dot 0x010 /* Send terminating dot line */
-#define topt_no_headers 0x020 /* Omit headers */
-#define topt_no_body 0x040 /* Omit body */
-#define topt_escape_headers 0x080 /* Apply escape check to headers */
-#define topt_use_bdat 0x100 /* prepend chunks with RFC3030 BDAT header */
-#define topt_output_string 0x200 /* create string rather than write to fd */
-#define topt_continuation 0x400 /* do not reset buffer */
-#define topt_not_socket 0x800 /* cannot do socket-only syscalls */
+#define topt_add_return_path 0x0001
+#define topt_add_delivery_date 0x0002
+#define topt_add_envelope_to 0x0004
+#define topt_escape_headers 0x0008 /* Apply escape check to headers */
+#define topt_use_crlf 0x0010 /* Terminate lines with CRLF */
+#define topt_no_headers 0x0020 /* Omit headers */
+#define topt_no_body 0x0040 /* Omit body */
+#define topt_end_dot 0x0080 /* Send terminating dot line */
+#define topt_no_flush 0x0100 /* more data expected after message (eg QUIT) */
+#define topt_use_bdat 0x0200 /* prepend chunks with RFC3030 BDAT header */
+#define topt_output_string 0x0400 /* create string rather than write to fd */
+#define topt_continuation 0x0800 /* do not reset buffer */
+#define topt_not_socket 0x1000 /* cannot do socket-only syscalls */
/* Options for smtp_write_command */
if (smtp_input && sender_host_address && !f.sender_host_notsocket &&
!receive_smtp_buffered())
{
- struct timeval tv;
+ struct timeval tv = {.tv_sec = 0, .tv_usec = 0};
fd_set select_check;
FD_ZERO(&select_check);
FD_SET(fileno(smtp_in), &select_check);
- tv.tv_sec = 0;
- tv.tv_usec = 0;
if (select(fileno(smtp_in) + 1, &select_check, NULL, NULL, &tv) != 0)
{
else if (chunking_state > CHUNKING_OFFERED)
{
- smtp_printf("250- %u byte chunk, total %d\r\n250 OK id=%s\r\n", FALSE,
+ /* If there is more input waiting, no need to flush (probably the client
+ pipelined QUIT after data). We check only the in-process buffer, not
+ the socket. */
+
+ smtp_printf("250- %u byte chunk, total %d\r\n250 OK id=%s\r\n",
+ receive_smtp_buffered(),
chunking_datasize, message_size+message_linecount, message_id);
chunking_state = CHUNKING_OFFERED;
}
else
- smtp_printf("250 OK id=%s\r\n", FALSE, message_id);
+ smtp_printf("250 OK id=%s\r\n", receive_smtp_buffered(), message_id);
if (host_checking)
fprintf(stdout,
{
int fd, rc;
fd_set fds;
-struct timeval tzero;
+struct timeval tzero = {.tv_sec = 0, .tv_usec = 0};
#ifndef DISABLE_TLS
if (tls_in.active.sock >= 0)
fd = fileno(smtp_in);
FD_ZERO(&fds);
FD_SET(fd, &fds);
-tzero.tv_sec = 0;
-tzero.tv_usec = 0;
rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
if (rc <= 0) return TRUE; /* Not ready to read */
{
#ifndef DISABLE_DKIM
int n = smtp_inend - smtp_inptr;
+if (chunking_state == CHUNKING_LAST && chunking_data_left < n)
+ n = chunking_data_left;
if (n > 0)
dkim_exim_verify_feed(smtp_inptr, n);
#endif
smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
#ifndef DISABLE_TLS
-tls_close(NULL, TLS_SHUTDOWN_NOWAIT);
+tls_close(NULL, TLS_SHUTDOWN_WAIT);
#endif
log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
smtp_get_connection_info());
+
+/* Pause, hoping client will FIN first so that they get the TIME_WAIT.
+The socket should become readble (though with no data) */
+
+ {
+ int fd = fileno(smtp_in);
+ fd_set fds;
+ struct timeval t_limit = {.tv_sec = 0, .tv_usec = 200*1000};
+
+ FD_ZERO(&fds);
+ FD_SET(fd, &fds);
+ (void) select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &t_limit);
+ }
}
while (*p) *p++ = '*';
}
- HDEBUG(D_transport|D_acl|D_v)
- debug_printf_indent(" SMTP%c> %s\n", ">+|"[mode], big_buffer);
+ HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP%c> %s\n",
+ mode == SCMD_BUFFER ? '|' : mode == SCMD_MORE ? '+' : '>',
+ big_buffer);
}
if (mode != SCMD_BUFFER)
return inheader? spool_read_hdrerror : spool_read_enverror;
}
+
+#ifndef COMPILE_UTILITY
+/* Read out just the (envelope) sender string from the spool -H file.
+Remove the <> wrap and return it in allocated store. Return NULL on error.
+
+We assume that message_subdir is already set.
+*/
+
+uschar *
+spool_sender_from_msgid(const uschar * id)
+{
+uschar * name = string_sprintf("%s-H", id);
+FILE * fp;
+int n;
+uschar * yield = NULL;
+
+if (!(fp = Ufopen(spool_fname(US"input", message_subdir, name, US""), "rb")))
+ return NULL;
+
+DEBUG(D_deliver) debug_printf_indent("reading spool file %s\n", name);
+
+/* Skip the line with the copy of the filename, then the line with login/uid/gid.
+Read the next line, which should be the envelope sender.
+Do basic validation on that. */
+
+if ( Ufgets(big_buffer, big_buffer_size, fp) != NULL
+ && Ufgets(big_buffer, big_buffer_size, fp) != NULL
+ && Ufgets(big_buffer, big_buffer_size, fp) != NULL
+ && (n = Ustrlen(big_buffer)) >= 3
+ && big_buffer[0] == '<' && big_buffer[n-2] == '>'
+ )
+ {
+ yield = store_get(n-2, TRUE); /* tainted */
+ Ustrncpy(yield, big_buffer+1, n-3);
+ yield[n-3] = 0;
+ }
+fclose(fp);
+return yield;
+}
+#endif /* COMPILE_UTILITY */
+
/* vi: aw ai sw=2
*/
/* End of spool_in.c */
+/*
+Arguments:
+ ct_ctx client TLS context pointer, or NULL for the one global server context
+*/
+
+void
+tls_shutdown_wr(void * ct_ctx)
+{
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
+tls_support * tlsp = state->tlsp;
+
+if (!tlsp || tlsp->active.sock < 0) return; /* TLS was not active */
+
+tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
+
+HDEBUG(D_transport|D_tls|D_acl|D_v) debug_printf_indent(" SMTP(TLS shutdown)>>\n");
+gnutls_bye(state->session, GNUTLS_SHUT_WR);
+}
+
/*************************************************
* Close down a TLS session *
*************************************************/
Arguments:
ct_ctx client context pointer, or NULL for the one global server context
- shutdown 1 if TLS close-alert is to be sent,
- 2 if also response to be waited for
+ do_shutdown 0 no data-flush or TLS close-alert
+ 1 if TLS close-alert is to be sent,
+ 2 if also response to be waited for (2s timeout)
Returns: nothing
*/
void
-tls_close(void * ct_ctx, int shutdown)
+tls_close(void * ct_ctx, int do_shutdown)
{
exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
tls_support * tlsp = state->tlsp;
if (!tlsp || tlsp->active.sock < 0) return; /* TLS was not active */
-tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
-
-if (shutdown)
+if (do_shutdown)
{
DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
- shutdown > 1 ? " (with response-wait)" : "");
+ do_shutdown > 1 ? " (with response-wait)" : "");
+
+ tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
ALARM(2);
- gnutls_bye(state->session, shutdown > 1 ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
+ gnutls_bye(state->session, do_shutdown > 1 ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
ALARM_CLR(0);
}
void
-tls_get_cache()
+tls_get_cache(void)
{
#ifndef DISABLE_DKIM
exim_gnutls_state_st * state = &state_server;
}
-
-
/*************************************************
* Read bytes from TLS channel *
*************************************************/
void
-tls_get_cache()
+tls_get_cache(void)
{
#ifndef DISABLE_DKIM
int n = ssl_xfer_buffer_hwm - ssl_xfer_buffer_lwm;
tls_could_read(void)
{
return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm
- || SSL_pending(state_server.lib_state.lib_ssl) > 0;
+ || SSL_pending(state_server.lib_state.lib_ssl) > 0;
}
+/*
+Arguments:
+ ct_ctx client TLS context pointer, or NULL for the one global server context
+*/
+
+void
+tls_shutdown_wr(void * ct_ctx)
+{
+exim_openssl_client_tls_ctx * o_ctx = ct_ctx;
+SSL ** sslp = o_ctx ? &o_ctx->ssl : (SSL **) &state_server.lib_state.lib_ssl;
+int * fdp = o_ctx ? &tls_out.active.sock : &tls_in.active.sock;
+int rc;
+
+if (*fdp < 0) return; /* TLS was not active */
+
+tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
+
+HDEBUG(D_transport|D_tls|D_acl|D_v) debug_printf_indent(" SMTP(TLS shutdown)>>\n");
+rc = SSL_shutdown(*sslp);
+if (rc < 0) DEBUG(D_tls)
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("SSL_shutdown: %s\n", ssl_errstring);
+ }
+}
+
/*************************************************
* Close down a TLS session *
*************************************************/
Arguments:
ct_ctx client TLS context pointer, or NULL for the one global server context
- shutdown 1 if TLS close-alert is to be sent,
+ do_shutdown 0 no data-flush or TLS close-alert
+ 1 if TLS close-alert is to be sent,
2 if also response to be waited for
Returns: nothing
*/
void
-tls_close(void * ct_ctx, int shutdown)
+tls_close(void * ct_ctx, int do_shutdown)
{
exim_openssl_client_tls_ctx * o_ctx = ct_ctx;
-SSL **sslp = o_ctx ? &o_ctx->ssl : (SSL **) &state_server.lib_state.lib_ssl;
-int *fdp = o_ctx ? &tls_out.active.sock : &tls_in.active.sock;
+SSL ** sslp = o_ctx ? &o_ctx->ssl : (SSL **) &state_server.lib_state.lib_ssl;
+int * fdp = o_ctx ? &tls_out.active.sock : &tls_in.active.sock;
if (*fdp < 0) return; /* TLS was not active */
-tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
-
-if (shutdown)
+if (do_shutdown)
{
int rc;
DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
- shutdown > 1 ? " (with response-wait)" : "");
+ do_shutdown > 1 ? " (with response-wait)" : "");
+
+ tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
if ( (rc = SSL_shutdown(*sslp)) == 0 /* send "close notify" alert */
- && shutdown > 1)
+ && do_shutdown > 1)
{
ALARM(2);
rc = SSL_shutdown(*sslp); /* wait for response */
Arguments:
tctx
- (fd, msg) Either and fd, to write the message to,
+ (fd, msg) Either an fd, to write the message to,
or a string: if null write message to allocated space
otherwire take content as headers.
addr (chain of) addresses (for extra headers), or NULL;
add_delivery_date if TRUE, add a "delivery-date" header
use_crlf if TRUE, turn NL into CR LF
end_dot if TRUE, send a terminating "." line at the end
+ no_flush if TRUE, do not flush at end
no_headers if TRUE, omit the headers
no_body if TRUE, omit the body
check_string a string to check for at the start of lines, or NULL
/* Write out any remaining data in the buffer before returning. */
-return (len = chunk_ptr - deliver_out_buffer) <= 0 ||
- transport_write_block(tctx, deliver_out_buffer, len, FALSE);
+return (len = chunk_ptr - deliver_out_buffer) <= 0
+ || transport_write_block(tctx, deliver_out_buffer, len,
+ !!(tctx->options & topt_no_flush));
}
tctx->u.fd = fd_write;
tctx->check_string = tctx->escape_string = NULL;
- tctx->options &= ~(topt_use_crlf | topt_end_dot | topt_use_bdat);
+ tctx->options &= ~(topt_use_crlf | topt_end_dot | topt_use_bdat | topt_no_flush);
rc = internal_transport_write_message(tctx, size_limit);
/* Update the database */
dbfn_write(dbm_file, host->name, host_record, sizeof(dbdata_wait) + host_length);
- DEBUG(D_transport) debug_printf("added to list for %s\n", host->name);
+ DEBUG(D_transport) debug_printf("added %.*s to queue for %s\n",
+ MESSAGE_ID_LENGTH, message_id, host->name);
}
/* All now done */
current_local_identity =
smtp_local_identity(s_compare->current_sender_address, s_compare->tblock);
-if (!(new_sender_address = deliver_get_sender_address(message_id)))
- return FALSE;
+if (!(new_sender_address = spool_sender_from_msgid(message_id)))
+ return FALSE;
+
message_local_identity =
smtp_local_identity(new_sender_address, s_compare->tblock);
sx->send_quit = FALSE;
goto TLS_FAILED;
}
+ sx->send_tlsclose = TRUE;
/* TLS session is set up. Check the inblock fill level. If there is
content then as we have not yet done a tls read it must have arrived before
#ifndef DISABLE_TLS
if (sx->cctx.tls_ctx)
{
- tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+ if (sx->send_tlsclose)
+ {
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+ sx->send_tlsclose = FALSE;
+ }
sx->cctx.tls_ctx = NULL;
}
#endif
fd_set rfds, efds;
int max_fd = MAX(pfd[0], tls_out.active.sock) + 1;
int rc, i;
+BOOL send_tls_shutdown = TRUE;
close(pfd[1]);
if ((rc = exim_fork(US"tls-proxy")))
/* handle inbound data */
if (FD_ISSET(tls_out.active.sock, &rfds))
- if ((rc = tls_read(ct_ctx, buf, bsize)) <= 0)
- {
+ if ((rc = tls_read(ct_ctx, buf, bsize)) <= 0) /* Expect -1 for EOF; */
+ { /* that reaps the TLS Close Notify record */
fd_bits &= ~1;
FD_CLR(tls_out.active.sock, &rfds);
shutdown(pfd[0], SHUT_WR);
for (int nbytes = 0; rc - nbytes > 0; nbytes += i)
if ((i = write(pfd[0], buf + nbytes, rc - nbytes)) < 0) goto done;
}
- else if (fd_bits & 1)
- FD_SET(tls_out.active.sock, &rfds);
- /* handle outbound data */
+ /* Handle outbound data. We cannot combine payload and the TLS-close
+ due to the limitations of the (pipe) channel feeding us. */
if (FD_ISSET(pfd[0], &rfds))
if ((rc = read(pfd[0], buf, bsize)) <= 0)
{
- fd_bits = 0;
- tls_close(ct_ctx, TLS_SHUTDOWN_NOWAIT);
- ct_ctx = NULL;
+ fd_bits &= ~2;
+ FD_CLR(pfd[0], &rfds);
+
+# ifdef EXIM_TCP_CORK /* Use _CORK to get TLS Close Notify in FIN segment */
+ (void) setsockopt(tls_out.active.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_shutdown_wr(ct_ctx);
+ send_tls_shutdown = FALSE;
+ shutdown(tls_out.active.sock, SHUT_WR);
}
else
{
if ((i = tls_write(ct_ctx, buf + nbytes, rc - nbytes, FALSE)) < 0)
goto done;
}
- else if (fd_bits & 2)
- FD_SET(pfd[0], &rfds);
+
+ if (fd_bits & 1) FD_SET(tls_out.active.sock, &rfds);
+ if (fd_bits & 2) FD_SET(pfd[0], &rfds);
}
done:
+ if (send_tls_shutdown) tls_close(ct_ctx, TLS_SHUTDOWN_NOWAIT);
+ ct_ctx = NULL;
testharness_pause_ms(100); /* let logging complete */
exim_exit(EXIT_SUCCESS);
}
#ifdef SUPPORT_DANE
BOOL dane_held;
#endif
+BOOL tcw_done = FALSE, tcw = FALSE;
*message_defer = FALSE;
report_time_since(&t0, US"dkim_exim_sign_init (delta)");
# endif
}
+#endif
+
+ /* See if we can pipeline QUIT. Reasons not to are
+ - pipelining not active
+ - not ok to send quit
+ - errors in amtp transation responses
+ - more addrs to send for this message or this host
+ - more messages for this host
+ If we can, we want the message-write to not flush (the tail end of) its data out. */
+
+ if ( sx->pipelining_used
+ && (sx->ok && sx->completed_addr || sx->peer_offered & OPTION_CHUNKING)
+ && sx->send_quit
+ && !(sx->first_addr || f.continue_more)
+ )
+ {
+ smtp_compare_t t_compare =
+ {.tblock = tblock, .current_sender_address = sender_address};
+
+ tcw_done = TRUE;
+ tcw =
+#ifndef DISABLE_TLS
+ ( tls_out.active.sock < 0 && !continue_proxy_cipher
+ || verify_check_given_host(CUSS &ob->hosts_nopass_tls, host) != OK
+ )
+ &&
+#endif
+ transport_check_waiting(tblock->name, host->name,
+ tblock->connection_max_messages, new_message_id,
+ (oicf)smtp_are_same_identities, (void*)&t_compare);
+ if (!tcw)
+ {
+ HDEBUG(D_transport) debug_printf("will pipeline QUIT\n");
+ tctx.options |= topt_no_flush;
+ }
+ }
+
+#ifndef DISABLE_DKIM
sx->ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message);
#else
sx->ok = transport_write_message(&tctx, 0);
smtp_command = US"end of data";
+ /* If we can pipeline a QUIT with the data them send it now. If a new message
+ for this host appeared in the queue while data was being sent, we will not see
+ it and it will have to wait for a queue run. If there was one but another
+ thread took it, we might attempt to send it - but locking of spoolfiles will
+ detect that. Use _MORE to get QUIT in FIN segment. */
+
+ if (tcw_done && !tcw)
+ {
+ /*XXX jgh 2021/03/10 google et. al screwup. G, at least, sends TCP FIN in response to TLS
+ close-notify. Under TLS 1.3, violating RFC.
+ However, TLS 1.2 does not have half-close semantics. */
+
+ if ( sx->cctx.tls_ctx
+#if 0 && !defined(DISABLE_TLS)
+ && Ustrcmp(tls_out.ver, "TLS1.3") != 0
+#endif
+ )
+ { /* Send QUIT now and not later */
+ (void)smtp_write_command(sx, SCMD_FLUSH, "QUIT\r\n");
+ sx->send_quit = FALSE;
+ }
+ else
+ { /* add QUIT to the output buffer */
+ (void)smtp_write_command(sx, SCMD_MORE, "QUIT\r\n");
+ sx->send_quit = FALSE; /* avoid sending it later */
+
+#ifndef DISABLE_TLS
+ if (sx->cctx.tls_ctx) /* need to send TLS Cloe Notify */
+ {
+# ifdef EXIM_TCP_CORK /* Use _CORK to get Close Notify in FIN segment */
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_shutdown_wr(sx->cctx.tls_ctx);
+ sx->send_tlsclose = FALSE; /* avoid later repeat */
+ }
+#endif
+ HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(shutdown)>>\n");
+ shutdown(sx->cctx.sock, SHUT_WR); /* flush output buffer, with TCP FIN */
+ }
+ }
+
if (sx->peer_offered & OPTION_CHUNKING && sx->cmd_count > 1)
{
/* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
{
save_errno = errno;
message = NULL;
- sx->send_quit = check_response(host, &save_errno, addrlist->more_errno,
+ /* Clear send_quit flag if needed. Do not set. */
+ sx->send_quit &= check_response(host, &save_errno, addrlist->more_errno,
sx->buffer, &code, &message, &pass_message);
goto FAILED;
}
if (sx->completed_addr && sx->ok && sx->send_quit)
{
- smtp_compare_t t_compare;
-
- t_compare.tblock = tblock;
- t_compare.current_sender_address = sender_address;
+ smtp_compare_t t_compare =
+ {.tblock = tblock, .current_sender_address = sender_address};
if ( sx->first_addr /* more addrs for this message */
- || f.continue_more /* more addrs for coninued-host */
+ || f.continue_more /* more addrs for continued-host */
+ || tcw_done && tcw /* more messages for host */
|| (
#ifndef DISABLE_TLS
( tls_out.active.sock < 0 && !continue_proxy_cipher
#endif
int socket_fd = sx->cctx.sock;
-
if (sx->first_addr) /* More addresses still to be sent */
{ /* for this message */
continue_sequence++; /* Causes * in logging */
the socket on. */
tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_WAIT);
+ sx->send_tlsclose = FALSE;
sx->cctx.tls_ctx = NULL;
tls_out.active.sock = -1;
smtp_peer_options = smtp_peer_options_wrap;
SEND_QUIT:
if (sx->send_quit)
- /* Use _MORE to get QUIT in FIN segment */
+ { /* Use _MORE to get QUIT in FIN segment */
(void)smtp_write_command(sx, SCMD_MORE, "QUIT\r\n");
-
-END_OFF:
-
#ifndef DISABLE_TLS
-# ifdef EXIM_TCP_CORK
-if (sx->cctx.tls_ctx) /* Use _CORK to get TLS Close Notify in FIN segment */
- (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+ if (sx->cctx.tls_ctx)
+ {
+# ifdef EXIM_TCP_CORK /* Use _CORK to get TLS Close Notify in FIN segment */
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
# endif
-
-tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
-sx->cctx.tls_ctx = NULL;
+ tls_shutdown_wr(sx->cctx.tls_ctx);
+ sx->send_tlsclose = FALSE;
+ }
#endif
+ }
+
+END_OFF:
/* Close the socket, and return the appropriate value, first setting
works because the NULL setting is passed back to the calling process, and
specified in the transports, and therefore not visible at top level, in which
case continue_more won't get set. */
-HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
if (sx->send_quit)
{
/* This flushes data queued in the socket, being the QUIT and any TLS Close,
sending them along with the client FIN flag. Us (we hope) sending FIN first
means we (client) take the TIME_WAIT state, so the server (which likely has a
- higher connection rate) does no have to. */
+ higher connection rate) does not have to. */
+ HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(shutdown)>>\n");
shutdown(sx->cctx.sock, SHUT_WR);
+ }
+if (sx->send_quit || tcw_done && !tcw)
+ {
/* Wait for (we hope) ack of our QUIT, and a server FIN. Discard any data
received, then discard the socket. Any packet received after then, or receive
data still in the socket, will get a RST - hence the pause/drain. */
+ /* Reap the response to QUIT, timing out after one second */
+ (void) smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', 1);
+#ifndef DISABLE_TLS
+ if (sx->cctx.tls_ctx)
+ {
+ int n;
+
+ /* Reap the TLS Close Notify from the server, timing out after one second */
+ sigalrm_seen = FALSE;
+ ALARM(1);
+ do
+ n = tls_read(sx->cctx.tls_ctx, sx->inbuffer, sizeof(sx->inbuffer));
+ while (!sigalrm_seen && n > 0);
+ ALARM_CLR(0);
+
+# ifdef EXIM_TCP_CORK
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_WAIT);
+ sx->cctx.tls_ctx = NULL;
+ }
+#endif
millisleep(20);
- testharness_pause_ms(200);
if (fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0)
- for (int i = 16; read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && i > 0;)
- i--; /* drain socket */
+ for (int i = 16, n; /* drain socket */
+ (n = read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer))) > 0 && i > 0;
+ i--) HDEBUG(D_transport|D_acl|D_v)
+ {
+ int m = MIN(n, 64);
+ debug_printf_indent(" SMTP(drain %d bytes)<< %.*s\n", n, m, sx->inbuffer);
+ for (m = 0; m < n; m++)
+ debug_printf("0x%02x\n", sx->inbuffer[m]);
+ }
}
+HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
(void)close(sx->cctx.sock);
#ifndef DISABLE_EVENT
BOOL completed_addr:1;
BOOL send_rset:1;
BOOL send_quit:1;
+ BOOL send_tlsclose:1;
int max_rcpt;
int cmd_count;
--- /dev/null
+# Exim test configuration 0623
+
+SERVER=
+
+.include DIR/aux-var/std_conf_prefix
+
+primary_hostname = myhost.test.ex
+log_selector = +pipelining +received_recipients +smtp_connection
+
+
+# ----- Main settings -----
+
+acl_smtp_rcpt = accept
+
+# ----- Routers -----
+
+begin routers
+
+client:
+ driver = accept
+ transport = send_to_server
+ errors_to = ""
+
+
+# ----- Transports -----
+
+begin transports
+
+send_to_server:
+ driver = smtp
+ allow_localhost
+ hosts = 127.0.0.1
+ port = PORT_D
+
+# ----- Retry -----
+
+
+begin retry
+
+* * F,5d,10s
+
+
+# End
exim_path = EXIM_PATH
keep_environment =
+add_environment = SSLKEYLOGFILE=DIR/spool/sslkeys
host_lookup_order = bydns
spool_directory = DIR/spool
log_file_path = DIR/spool/log/SERVER%slog
smtp_receive_timeout = 2s
.ifdef _HAVE_DKIM
-log_selector = +received_recipients +dkim_verbose
+log_selector = +received_recipients +millisec +dkim_verbose
.else
-log_selector = +received_recipients
+log_selector = +received_recipients +millisec
.endif
.ifdef _OPT_MAIN_TLS_CERTIFICATE
--- /dev/null
+# Exim test configuration 0623
+
+SERVER=
+
+.include DIR/aux-var/std_conf_prefix
+
+primary_hostname = myhost.test.ex
+log_selector = +pipelining +received_recipients +smtp_connection +millisec
+
+
+# ----- Main settings -----
+
+acl_smtp_rcpt = accept
+
+# ----- Routers -----
+
+begin routers
+
+client:
+ driver = accept
+ transport = send_to_server
+ errors_to = ""
+
+
+# ----- Transports -----
+
+begin transports
+
+send_to_server:
+ driver = smtp
+ allow_localhost
+ hosts = 127.0.0.1
+ port = PORT_D
+
+# ----- Retry -----
+
+
+begin retry
+
+* * F,5d,10s
+
+
+# End
--- /dev/null
+1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for good@test.ex
+1999-03-02 09:44:33 10HmaX-0005vi-00 => good@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] L C="250 OK message data"
+1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for nopipe@test.ex
+1999-03-02 09:44:33 10HmaY-0005vi-00 => nopipe@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] C="250 OK message data"
+1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
+1999-03-02 09:44:33 10HmaZ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for tempreject@test.ex
+1999-03-02 09:44:33 10HmaZ-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 451 Service not available
+1999-03-02 09:44:33 10HmaZ-0005vi-00 == tempreject@test.ex R=client T=send_to_server defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 451 Service not available
+1999-03-02 09:44:33 10HmaZ-0005vi-00 removed by CALLER
+1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbA-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for permreject@test.ex
+1999-03-02 09:44:33 10HmbA-0005vi-00 ** permreject@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 550 content rejected
+1999-03-02 09:44:33 10HmbA-0005vi-00 permreject@test.ex: error ignored
+1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
+1999-03-02 09:44:33 10HmbB-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for permreject@test.ex
+1999-03-02 09:44:33 10HmbB-0005vi-00 H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to end of data
+1999-03-02 09:44:33 10HmbB-0005vi-00 == permreject@test.ex R=client T=send_to_server defer (-18) H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to end of data
+1999-03-02 09:44:33 10HmbB-0005vi-00 removed by CALLER
+1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
-1999-03-02 09:44:33 10HmbA-0005vi-00 SMTP data timeout (message abandoned) on connection from (tester) [127.0.0.1] F=<someone@some.domain>
-1999-03-02 09:44:33 SMTP connection from (tester) [127.0.0.1] lost while reading message data
-1999-03-02 09:44:33 SMTP connection from (tester) [127.0.0.1] lost while reading message data
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
-1999-03-02 09:44:33 H=(tester) [127.0.0.1] F=<someone@some.domain> rejected RCPT <dummy@reject.ex>: relay not permitted
-1999-03-02 09:44:33 rejected from <someone@some.domain> H=(tester) [127.0.0.1]: Non-CRLF-terminated header, under CHUNKING: message abandoned
+2017-07-30 18:51:05.712 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 SMTP data timeout (message abandoned) on connection from (tester) [127.0.0.1] F=<someone@some.domain>
+2017-07-30 18:51:05.712 SMTP connection from (tester) [127.0.0.1] lost while reading message data
+2017-07-30 18:51:05.712 SMTP connection from (tester) [127.0.0.1] lost while reading message data
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp K S=sss for CALLER@test.ex
+2017-07-30 18:51:05.712 H=(tester) [127.0.0.1] F=<someone@some.domain> rejected RCPT <dummy@reject.ex>: relay not permitted
+2017-07-30 18:51:05.712 rejected from <someone@some.domain> H=(tester) [127.0.0.1]: Non-CRLF-terminated header, under CHUNKING: message abandoned
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for a@test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 => a@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for b@test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP timeout after end of data (ddd bytes written): Connection timed out
-1999-03-02 09:44:33 10HmaY-0005vi-00 == b@test.ex R=to_server T=remote_smtp defer (dd): Connection timed out H=127.0.0.1 [127.0.0.1]: SMTP timeout after end of data (ddd bytes written)
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for c@test.ex
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => c@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK"
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for d@test.ex
-1999-03-02 09:44:33 10HmbA-0005vi-00 ** d@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 500 oops
-1999-03-02 09:44:33 10HmbA-0005vi-00 d@test.ex: error ignored
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for e@test.ex
-1999-03-02 09:44:33 10HmbB-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 400 not right now
-1999-03-02 09:44:33 10HmbB-0005vi-00 == e@test.ex R=to_server T=remote_smtp defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 400 not right now
-1999-03-02 09:44:33 10HmbC-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for ebad@test.ex
-1999-03-02 09:44:33 10HmbC-0005vi-00 ** ebad@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<ebad@test.ex>: 550 sorry, no
-1999-03-02 09:44:33 10HmbC-0005vi-00 ebad@test.ex: error ignored
-1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbD-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for p@test.ex
-1999-03-02 09:44:33 10HmbD-0005vi-00 => p@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
-1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbE-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for q@test.ex
-1999-03-02 09:44:33 10HmbE-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP timeout after pipelined end of data (ddd bytes written): Connection timed out
-1999-03-02 09:44:33 10HmbE-0005vi-00 == q@test.ex R=to_server T=remote_smtp defer (dd): Connection timed out H=127.0.0.1 [127.0.0.1]: SMTP timeout after pipelined end of data (ddd bytes written)
-1999-03-02 09:44:33 10HmbF-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for r@test.ex
-1999-03-02 09:44:33 10HmbF-0005vi-00 => r@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
-1999-03-02 09:44:33 10HmbF-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbG-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for s@test.ex
-1999-03-02 09:44:33 10HmbG-0005vi-00 ** s@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 550 unacceptable mail-from
-1999-03-02 09:44:33 10HmbG-0005vi-00 s@test.ex: error ignored
-1999-03-02 09:44:33 10HmbG-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbH-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for s1@test.ex
-1999-03-02 09:44:33 10HmbH-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 450 greylisted mail-from
-1999-03-02 09:44:33 10HmbH-0005vi-00 == s1@test.ex R=to_server T=remote_smtp defer (-45) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 450 greylisted mail-from
-1999-03-02 09:44:33 10HmbI-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for t@test.ex
-1999-03-02 09:44:33 10HmbI-0005vi-00 ** t@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<t@test.ex>: 550 no such recipient
-1999-03-02 09:44:33 10HmbI-0005vi-00 t@test.ex: error ignored
-1999-03-02 09:44:33 10HmbI-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbJ-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for u@test.ex
-1999-03-02 09:44:33 10HmbJ-0005vi-00 ** u@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 500 oops bdat
-1999-03-02 09:44:33 10HmbJ-0005vi-00 u@test.ex: error ignored
-1999-03-02 09:44:33 10HmbJ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbK-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for v@test.ex
-1999-03-02 09:44:33 10HmbK-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 400 not right now bdat
-1999-03-02 09:44:33 10HmbK-0005vi-00 == v@test.ex R=to_server T=remote_smtp defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 400 not right now bdat
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for a@test.ex
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 => a@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for b@test.ex
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP timeout after end of data (ddd bytes written): Connection timed out
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 == b@test.ex R=to_server T=remote_smtp defer (dd): Connection timed out H=127.0.0.1 [127.0.0.1]: SMTP timeout after end of data (ddd bytes written)
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for c@test.ex
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 => c@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK"
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for d@test.ex
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 ** d@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 500 oops
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 d@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for e@test.ex
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 400 not right now
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 == e@test.ex R=to_server T=remote_smtp defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 400 not right now
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for ebad@test.ex
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 ** ebad@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<ebad@test.ex>: 550 sorry, no
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 ebad@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for p@test.ex
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 => p@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for r@test.ex
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 => r@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for s@test.ex
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 ** s@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 550 unacceptable mail-from
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 s@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbG-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for s1@test.ex
+2017-07-30 18:51:05.712 10HmbG-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 450 greylisted mail-from
+2017-07-30 18:51:05.712 10HmbG-0005vi-00 == s1@test.ex R=to_server T=remote_smtp defer (-45) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 450 greylisted mail-from
+2017-07-30 18:51:05.712 10HmbH-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for t@test.ex
+2017-07-30 18:51:05.712 10HmbH-0005vi-00 ** t@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<t@test.ex>: 550 no such recipient
+2017-07-30 18:51:05.712 10HmbH-0005vi-00 t@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbH-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbI-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for u@test.ex
+2017-07-30 18:51:05.712 10HmbI-0005vi-00 ** u@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 500 oops bdat
+2017-07-30 18:51:05.712 10HmbI-0005vi-00 u@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbI-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbJ-0005vi-00 <= sender@source.dom U=root P=local-bsmtp S=sss for v@test.ex
+2017-07-30 18:51:05.712 10HmbJ-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 400 not right now bdat
+2017-07-30 18:51:05.712 10HmbJ-0005vi-00 == v@test.ex R=to_server T=remote_smtp defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 400 not right now bdat
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for a@test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 => a@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for d@test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 ** d@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after sending data block: 500 oops bdat-nonlast
-1999-03-02 09:44:33 10HmaY-0005vi-00 d@test.ex: error ignored
-1999-03-02 09:44:33 10HmaY-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for p@test.ex
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => p@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for s@test.ex
-1999-03-02 09:44:33 10HmbA-0005vi-00 ** s@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 550 unacceptable mail-from
-1999-03-02 09:44:33 10HmbA-0005vi-00 s@test.ex: error ignored
-1999-03-02 09:44:33 10HmbA-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbB-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for t@test.ex
-1999-03-02 09:44:33 10HmbB-0005vi-00 ** t@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<t@test.ex>: 550 no such recipient
-1999-03-02 09:44:33 10HmbB-0005vi-00 t@test.ex: error ignored
-1999-03-02 09:44:33 10HmbB-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbC-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for t1@test.ex t2@test.ex
-1999-03-02 09:44:33 10HmbC-0005vi-00 ** t1@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<t1@test.ex>: 550 no such recipient
-1999-03-02 09:44:33 10HmbC-0005vi-00 => t2@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
-1999-03-02 09:44:33 10HmbC-0005vi-00 t1@test.ex: error ignored
-1999-03-02 09:44:33 10HmbC-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbD-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for u@test.ex
-1999-03-02 09:44:33 10HmbD-0005vi-00 ** u@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 500 oops nonlast bdat
-1999-03-02 09:44:33 10HmbD-0005vi-00 u@test.ex: error ignored
-1999-03-02 09:44:33 10HmbD-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbE-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for v@test.ex
-1999-03-02 09:44:33 10HmbE-0005vi-00 ** v@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 500 oops bdat
-1999-03-02 09:44:33 10HmbE-0005vi-00 v@test.ex: error ignored
-1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbF-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for u@test.ex
-1999-03-02 09:44:33 10HmbF-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 400 oops nonlast bdat
-1999-03-02 09:44:33 10HmbF-0005vi-00 == u@test.ex R=to_server T=remote_smtp defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 400 oops nonlast bdat
-1999-03-02 09:44:33 10HmbG-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for p@test.ex
-1999-03-02 09:44:33 10HmbG-0005vi-00 => p@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
-1999-03-02 09:44:33 10HmbG-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for a@test.ex
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 => a@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for d@test.ex
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 ** d@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after sending data block: 500 oops bdat-nonlast
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 d@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for p@test.ex
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 => p@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for s@test.ex
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 ** s@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 550 unacceptable mail-from
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 s@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for t@test.ex
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 ** t@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<t@test.ex>: 550 no such recipient
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 t@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for t1@test.ex t2@test.ex
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 ** t1@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after RCPT TO:<t1@test.ex>: 550 no such recipient
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 => t2@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 t1@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbC-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for u@test.ex
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 ** u@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 500 oops nonlast bdat
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 u@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbD-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for v@test.ex
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 ** v@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 500 oops bdat
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 v@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbE-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for u@test.ex
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 400 oops nonlast bdat
+2017-07-30 18:51:05.712 10HmbF-0005vi-00 == u@test.ex R=to_server T=remote_smtp defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined sending data block: 400 oops nonlast bdat
+2017-07-30 18:51:05.712 10HmbG-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for p@test.ex
+2017-07-30 18:51:05.712 10HmbG-0005vi-00 => p@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] K C="250 OK bdat"
+2017-07-30 18:51:05.712 10HmbG-0005vi-00 Completed
--- /dev/null
+2017-07-30 18:51:05.712 SMTP connection from root
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= fred@myhost.test.ex U=root P=local-smtp S=sss for good@test.ex
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 => good@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] L K C="250 OK chunked message data"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 Completed
+2017-07-30 18:51:05.712 SMTP connection from root closed by QUIT
+2017-07-30 18:51:05.712 SMTP connection from root
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= fred@myhost.test.ex U=root P=local-smtp S=sss for nopipe@test.ex
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 => nopipe@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] K C="250 OK chunked message data"
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 Completed
+2017-07-30 18:51:05.712 SMTP connection from root closed by QUIT
+2017-07-30 18:51:05.712 SMTP connection from root
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 <= fred@myhost.test.ex U=root P=local-smtp S=sss for tempreject@test.ex
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 451 Service not available
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 == tempreject@test.ex R=client T=send_to_server defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 451 Service not available
+2017-07-30 18:51:05.712 SMTP connection from root closed by QUIT
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 removed by CALLER
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 Completed
+2017-07-30 18:51:05.712 SMTP connection from root
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 <= fred@myhost.test.ex U=root P=local-smtp S=sss for permreject@test.ex
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 ** permreject@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 550 content rejected
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 permreject@test.ex: error ignored
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 Completed
+2017-07-30 18:51:05.712 SMTP connection from root closed by QUIT
+2017-07-30 18:51:05.712 SMTP connection from root
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 <= fred@myhost.test.ex U=root P=local-smtp S=sss for dataloss@test.ex
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to pipelined end of data
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 == dataloss@test.ex R=client T=send_to_server defer (-18) H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to pipelined end of data
+2017-07-30 18:51:05.712 SMTP connection from root closed by QUIT
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 removed by CALLER
+2017-07-30 18:51:05.712 10HmbB-0005vi-00 Completed
******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= someone@some.domain H=(rhu.barb) [127.0.0.1] P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no K S=sss for CALLER@test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= someone@some.domain H=(rhu.barb) [127.0.0.1] P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no K S=sss for CALLER@test.ex
+2017-07-30 18:51:05.712 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= someone@some.domain H=(rhu.barb) [127.0.0.1] P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no K S=sss for CALLER@test.ex
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= someone@some.domain H=(rhu.barb) [127.0.0.1] P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no K S=sss for CALLER@test.ex
1999-03-02 09:44:33 10HmbE-0005vi-00 => userb@test.ex R=cl_override T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbI-0005vi-00"
1999-03-02 09:44:33 10HmbE-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
-1999-03-02 09:44:33 10HmbJ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for userx@test.ex
-1999-03-02 09:44:33 10HmbK-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for usery@test.ex
-1999-03-02 09:44:33 10HmbL-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for userz@test.ex
+1999-03-02 09:44:33 10HmbJ-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for user_p@test.ex
+1999-03-02 09:44:33 10HmbK-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for user_q@test.ex
+1999-03-02 09:44:33 10HmbL-0005vi-00 <= CALLER@myhost.test.ex U=CALLER P=local S=sss for user_r@test.ex
1999-03-02 09:44:33 Start queue run: pid=pppp -qqf
-1999-03-02 09:44:33 10HmbJ-0005vi-00 => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbM-0005vi-00"
+1999-03-02 09:44:33 10HmbJ-0005vi-00 => user_p@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbM-0005vi-00"
1999-03-02 09:44:33 10HmbJ-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbL-0005vi-00 => userz@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbN-0005vi-00"
+1999-03-02 09:44:33 10HmbL-0005vi-00 => user_r@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbN-0005vi-00"
1999-03-02 09:44:33 10HmbL-0005vi-00 Completed
-1999-03-02 09:44:33 10HmbK-0005vi-00 => usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbO-0005vi-00"
+1999-03-02 09:44:33 10HmbK-0005vi-00 => user_q@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbO-0005vi-00"
1999-03-02 09:44:33 10HmbK-0005vi-00 Completed
1999-03-02 09:44:33 End queue run: pid=pppp -qqf
1999-03-02 09:44:33 End queue run: pid=pppp -qf
1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
1999-03-02 09:44:33 SMTP connection from [127.0.0.1]:1113 (TCP/IP connection count = 1)
-1999-03-02 09:44:33 10HmbM-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbJ-0005vi-00@myhost.test.ex for userx@test.ex
-1999-03-02 09:44:33 10HmbN-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbL-0005vi-00@myhost.test.ex for userz@test.ex
-1999-03-02 09:44:33 10HmbO-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbK-0005vi-00@myhost.test.ex for usery@test.ex
+1999-03-02 09:44:33 10HmbM-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbJ-0005vi-00@myhost.test.ex for user_p@test.ex
+1999-03-02 09:44:33 10HmbN-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbL-0005vi-00@myhost.test.ex for user_r@test.ex
+1999-03-02 09:44:33 10HmbO-0005vi-00 <= CALLER@myhost.test.ex H=localhost (myhost.test.ex) [127.0.0.1]:1113 P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no S=sss id=E10HmbK-0005vi-00@myhost.test.ex for user_q@test.ex
1999-03-02 09:44:33 SMTP connection from localhost (myhost.test.ex) [127.0.0.1]:1113 closed by QUIT
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= this-user@testhost.test.ex U=this-user P=local S=sss for other-user@test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 => other-user@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes K C="250- 3nn byte chunk, total 3nn\\n250 OK id=10HmaY-0005vi-00"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= this-user@testhost.test.ex U=this-user P=local S=sss for other-user@test.ex
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 => other-user@test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes K C="250- 3nn byte chunk, total 3nn\\n250 OK id=10HmaY-0005vi-00"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 Completed
******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_S
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= <> H=localhost (testhost.test.ex) [127.0.0.1] P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no K S=sss id=E10HmaX-0005vi-00@testhost.test.ex for other-user@test.ex
+2017-07-30 18:51:05.712 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_S
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= <> H=localhost (testhost.test.ex) [127.0.0.1] P=esmtps X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no K S=sss id=E10HmaX-0005vi-00@testhost.test.ex for other-user@test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= sender@testhost.test.ex U=sender P=local S=sss for a@test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 => a@test.ex R=to_server T=remote_smtp_dkim H=127.0.0.1 [127.0.0.1] K C="250- 6nn byte chunk, total 6nn\\n250 OK id=10HmaY-0005vi-00"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
-1999-03-02 09:44:33 10HmaZ-0005vi-00 <= sender@testhost.test.ex U=sender P=local S=sss for b@test.ex
-1999-03-02 09:44:33 10HmaZ-0005vi-00 => b@test.ex R=to_server T=remote_smtp_dkim H=127.0.0.1 [127.0.0.1] K C="250- 8nn byte chunk, total 8nn\\n250 OK id=10HmbA-0005vi-00"
-1999-03-02 09:44:33 10HmaZ-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= sender@testhost.test.ex U=sender P=local S=sss for a@test.ex
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 => a@test.ex R=to_server T=remote_smtp_dkim H=127.0.0.1 [127.0.0.1] K C="250- 6nn byte chunk, total 6nn\\n250 OK id=10HmaY-0005vi-00"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 <= sender@testhost.test.ex U=sender P=local S=sss for b@test.ex
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 => b@test.ex R=to_server T=remote_smtp_dkim H=127.0.0.1 [127.0.0.1] K C="250- 8nn byte chunk, total 8nn\\n250 OK id=10HmbA-0005vi-00"
+2017-07-30 18:51:05.712 10HmaZ-0005vi-00 Completed
******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_S
-1999-03-02 09:44:33 10HmaY-0005vi-00 DKIM: d=test.ex s=sel c=relaxed/relaxed a=rsa-sha256 b=1024 [verification succeeded]
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= <> H=localhost (testhost.test.ex) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=E10HmaX-0005vi-00@testhost.test.ex for a@test.ex
-1999-03-02 09:44:33 10HmbA-0005vi-00 DKIM: d=test.ex s=sel c=relaxed/relaxed a=rsa-sha256 b=1024 [verification succeeded]
-1999-03-02 09:44:33 10HmbA-0005vi-00 <= <> H=localhost (testhost.test.ex) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=E10HmaZ-0005vi-00@testhost.test.ex for b@test.ex
+2017-07-30 18:51:05.712 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_S
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 DKIM: d=test.ex s=sel c=relaxed/relaxed a=rsa-sha256 b=1024 [verification succeeded]
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= <> H=localhost (testhost.test.ex) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=E10HmaX-0005vi-00@testhost.test.ex for a@test.ex
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 DKIM: d=test.ex s=sel c=relaxed/relaxed a=rsa-sha256 b=1024 [verification succeeded]
+2017-07-30 18:51:05.712 10HmbA-0005vi-00 <= <> H=localhost (testhost.test.ex) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=E10HmaZ-0005vi-00@testhost.test.ex for b@test.ex
******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_S
-1999-03-02 09:44:33 10HmaX-0005vi-00 DKIM: d=test.ex s=sel c=simple/simple a=rsa-sha256 b=1024 [verification succeeded]
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= CALLER@bloggs.com H=(xxx) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=qwerty1234@disco-zombie.net for a@test.ex
-1999-03-02 09:44:33 10HmaY-0005vi-00 DKIM: d=test.ex s=sel c=simple/simple a=rsa-sha256 b=1024 [verification succeeded]
-1999-03-02 09:44:33 10HmaY-0005vi-00 <= CALLER@bloggs.com H=(xxx) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=qwerty1234@disco-zombie.net for a@test.ex
+2017-07-30 18:51:05.712 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_S
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 DKIM: d=test.ex s=sel c=simple/simple a=rsa-sha256 b=1024 [verification succeeded]
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= CALLER@bloggs.com H=(xxx) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=qwerty1234@disco-zombie.net for a@test.ex
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 DKIM: d=test.ex s=sel c=simple/simple a=rsa-sha256 b=1024 [verification succeeded]
+2017-07-30 18:51:05.712 10HmaY-0005vi-00 <= CALLER@bloggs.com H=(xxx) [127.0.0.1] P=esmtp K S=sss DKIM=test.ex id=qwerty1234@disco-zombie.net for a@test.ex
******** SERVER ********
-1999-03-02 09:44:33 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
-1999-03-02 09:44:33 10HmaX-0005vi-00 PRDR R=<bad1@test.ex> refusal
-1999-03-02 09:44:33 10HmaX-0005vi-00 PRDR R=<good@test.ex> acceptance
-1999-03-02 09:44:33 10HmaX-0005vi-00 PRDR R=<bad2@test.ex> refusal
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp PRDR K S=sss for bad1@test.ex good@test.ex bad2@test.ex
+2017-07-30 18:51:05.712 exim x.yz daemon started: pid=pppp, no queue runs, listening for SMTP on port PORT_D
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 PRDR R=<bad1@test.ex> refusal
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 PRDR R=<good@test.ex> acceptance
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 PRDR R=<bad2@test.ex> refusal
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= someone@some.domain H=(tester) [127.0.0.1] P=esmtp PRDR K S=sss for bad1@test.ex good@test.ex bad2@test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for usery@testhost.test.ex userz@testhost.test.ex
-1999-03-02 09:44:33 10HmaX-0005vi-00 => usery@testhost.test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] PRDR K C="250 first rcpt was good\\n250 OK, overall"
-1999-03-02 09:44:33 10HmaX-0005vi-00 -> userz@testhost.test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] PRDR K C="250 second rcpt was good\\n250 OK, overall"
-1999-03-02 09:44:33 10HmaX-0005vi-00 Completed
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 <= sender@dom U=root P=local-bsmtp S=sss for usery@testhost.test.ex userz@testhost.test.ex
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 => usery@testhost.test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] PRDR K C="250 first rcpt was good\\n250 OK, overall"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 -> userz@testhost.test.ex R=to_server T=remote_smtp H=127.0.0.1 [127.0.0.1] PRDR K C="250 second rcpt was good\\n250 OK, overall"
+2017-07-30 18:51:05.712 10HmaX-0005vi-00 Completed
******** SERVER ********
-1999-03-02 09:44:33 H=(tester) [127.0.0.1] F=<someone@some.domain> rejected RCPT <dummy@reject.ex>: relay not permitted
-1999-03-02 09:44:33 rejected from <someone@some.domain> H=(tester) [127.0.0.1]: Non-CRLF-terminated header, under CHUNKING: message abandoned
+2017-07-30 18:51:05.712 H=(tester) [127.0.0.1] F=<someone@some.domain> rejected RCPT <dummy@reject.ex>: relay not permitted
+2017-07-30 18:51:05.712 rejected from <someone@some.domain> H=(tester) [127.0.0.1]: Non-CRLF-terminated header, under CHUNKING: message abandoned
Envelope-from: <someone@some.domain>
Envelope-to: <CALLER@test.ex>
To: Susan@random.com
# drop pdkim debugging header
next if /^DKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
+ # Some platforms have TIOCOUTome do not
+ next if /\d+ bytes remain in socket output buffer$/;
# Various other IPv6 lines must be omitted too
next if /using host_fake_gethostbyname for \S+ \(IPv6\)/;
--- /dev/null
+# PIPELINING of QUIT
+need_ipv4
+#
+# Baseline: no error. Check the QUIT arrived befre we ack message-data
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+DATA
+300 go ahead
+.
+QUIT
+250 OK message data
+221 Closing connection
+****
+exim -odi good@test.ex
+****
+#
+# QUIT-pipeliining should not be done when PIPELINING not advertised
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+DATA
+300 go ahead
+.
+250 OK message data
+*sleep 1
+<<
+QUIT
+221 Closing connection
+****
+exim -odi nopipe@test.ex
+****
+#
+# Temp-error response to message-data
+# Check specifically for a close, and no repeated command
+# Also check Exim's list of commands sent
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+DATA
+300 go ahead
+.
+QUIT
+451 Service not available
+221 Closing connection
+*eof
+****
+exim -d-all+transport -odi tempreject@test.ex
+****
+exim -Mrm $msg1
+****
+#
+# Perm-error response to message-data
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+DATA
+300 go ahead
+.
+QUIT
+550 content rejected
+221 Closing connection
+*eof
+****
+exim -d-all+transport -odi permreject@test.ex
+****
+#
+# Channel-close response to message-data
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+DATA
+300 go ahead
+.
+>*eof
+****
+exim -d-all+transport -odi permreject@test.ex
+****
+exim -Mrm $msg1
+****
****
#
# Error case: server wrongly expected more data, client gets timeout for data-ack
-server PORT_S
-220 Greetings
-EHLO
-250-Hello there
-250-PIPELINING
-250 CHUNKING
-MAIL FROM
-RCPT TO
-BDAT 329 LAST
-*data 330
-250 good mail cmd
-****
-sudo exim -odf -bS
-EHLO test
-MAIL FROM:<sender@source.dom>
-RCPT TO:<q@test.ex>
-DATA
-Subject: foo
-
-data
-.
-QUIT
-****
+# XXX This is a problem with data/quit pipelining. The succeeding SMTP command cannot
+# be distinguished from the data, by the errroneous server.
+# Of course, we could avoid such pipelining on the client side, when BDAT is used.
+# But - is this any worse than a server failing to spot the data-dot under DATA?
+# I think not; both are culpable, and there is only so much the client can do.
+#server PORT_S
+#220 Greetings
+#EHLO
+#250-Hello there
+#250-PIPELINING
+#250 CHUNKING
+#MAIL FROM
+#RCPT TO
+#BDAT 329 LAST
+#*data 330
+#250 good mail cmd
+#****
+#sudo exim -odf -bS
+#EHLO test
+#MAIL FROM:<sender@source.dom>
+#RCPT TO:<q@test.ex>
+#DATA
+#Subject: foo
+#
+#data
+#.
+#QUIT
+#****
#
# Error case: server wrongly expected less data
# client get the data-ack, sends quit - but server
--- /dev/null
+# CHUNKING and PIPELINING of QUIT
+need_ipv4
+#
+# Chunking Baseline: no error. Check the QUIT arrived befre we ack message-data
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM
+RCPT TO
+BDAT 313 LAST
+250 OK mail
+250 OK rcpt
+*data 313
+QUIT
+250 OK chunked message data
+221 Closing connection
+****
+sudo exim -d-all+transport -odi -bs
+helo tester
+mail from:<fred@myhost.test.ex>
+rcpt to:<good@test.ex>
+data
+.
+quit
+****
+#
+# QUIT-pipeliining should not be done when PIPELINING not advertised
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-CHUNKING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+BDAT 315 LAST
+*data 315
+250 OK chunked message data
+QUIT
+221 Closing connection
+****
+sudo exim -d-all+transport -odi -bs
+helo tester
+mail from:<fred@myhost.test.ex>
+rcpt to:<nopipe@test.ex>
+data
+.
+quit
+****
+#
+# Temp-error response to message-data
+# Check specifically for a close, and no repeated command
+# Also check Exim's list of commands sent
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+BDAT 319 LAST
+*data 319
+QUIT
+451 Service not available
+221 Closing connection
+*eof
+****
+sudo exim -d-all+transport -odi -bs
+helo tester
+mail from:<fred@myhost.test.ex>
+rcpt to:<tempreject@test.ex>
+data
+.
+quit
+****
+exim -Mrm $msg1
+****
+#
+# Perm-error response to message-data
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+BDAT 319 LAST
+*data 319
+QUIT
+550 content rejected
+221 Closing connection
+*eof
+****
+sudo exim -d-all+transport -odi -bs
+helo tester
+mail from:<fred@myhost.test.ex>
+rcpt to:<permreject@test.ex>
+data
+.
+quit
+****
+#
+# Channel-close response to message-data
+server PORT_D
+220 Server ready
+EHLO
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM
+250 OK mail
+RCPT TO
+250 OK rcpt
+BDAT 317 LAST
+*data 317
+>*eof
+****
+sudo exim -d-all+transport -odi -bs
+helo tester
+mail from:<fred@myhost.test.ex>
+rcpt to:<dataloss@test.ex>
+data
+.
+quit
+****
+exim -Mrm $msg1
+****
# no tls proxy (default for test was permitting proxy)
exim -DSERVER=server -bd -oX PORT_D
****
-exim userx@test.ex
+exim user_p@test.ex
Test message 1
****
-exim usery@test.ex
+exim user_q@test.ex
Test message 2
****
-exim userz@test.ex
+exim user_r@test.ex
Test message 3
****
exim -d-all+acl '-DPEX=*' -qqf
transport_check_waiting: FALSE
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
Leaving my_smtp transport
LOG: MAIN
LOG: MAIN
H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined DATA: 403 Sorry temp data error
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
== yes@test.ex R=client T=send_to_server defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined DATA: 403 Sorry temp data error
SMTP>> writing message and terminating "."
SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP(closed)<<
SMTP(close)>>
LOG: MAIN
=> w@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] C="250 OK"
SMTP<< 250 OK
SMTP<< 351 Send more
SMTP>> writing message and terminating "."
- SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
=> b@test.ex F=<CALLER@test.ex> R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* L C="250 OK"
SMTP<< 503 Unexpected RCPT
SMTP<< 503 Unexpected DATA
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
** a@test.ex F=<CALLER@test.ex> R=client T=send_to_server H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined MAIL FROM:<CALLER@test.ex>: 550 NO
SMTP<< 250 OK
SMTP<< 351 OK
SMTP>> writing message and terminating "."
- SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
=> c@test.ex F=<CALLER@test.ex> R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* L C="250 OK"
SMTP<< 250 OK
SMTP<< 500 NO
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 200 OK
SMTP(close)>>
LOG: MAIN
** userx@test.ex R=r1 T=t1 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined DATA: 500 NO
SMTP>> DATA
SMTP<< 500 NO
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 200 OK
SMTP(close)>>
LOG: MAIN
** usery@test.ex R=r1 T=t1 H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after DATA: 500 NO
added retry item for R:x@y: errno=-44 more_errno=dd,A flags=0
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
set_process_info: pppp delivering 10HmaX-0005vi-00: just tried 127.0.0.1 [127.0.0.1]:PORT_S for x@y: result OK
address match test: subject=*@127.0.0.1 pattern=*
127.0.0.1 in "*"? yes (matched "*")
*@127.0.0.1 in "*"? yes (matched "*")
-set_process_info: pppp delivering 10HmaX-0005vi-00: waiting for a remote delivery subprocess to finish
checking status of V4NET.0.0.0
locking TESTSUITE/spool/db/retry.lockfile
locked TESTSUITE/spool/db/retry.lockfile
H=V4NET.0.0.0 [V4NET.0.0.0] Network Error
set_process_info: pppp delivering 10HmaX-0005vi-00: just tried V4NET.0.0.0 [V4NET.0.0.0]:PORT_S for x@y: result DEFER
added retry item for T:V4NET.0.0.0:V4NET.0.0.0:1224: errno=dd more_errno=dd,A flags=2
+set_process_info: pppp delivering 10HmaX-0005vi-00: waiting for a remote delivery subprocess to finish
set_process_info: pppp delivering 10HmaX-0005vi-00 (just run smtp for x@y in subprocess)
search_tidyup called
reading retry information for T:V4NET.0.0.0:V4NET.0.0.0:1224 from subprocess
added retry item for T:127.0.0.1:127.0.0.1:1225: errno=dd more_errno=dd,A flags=2
all IP addresses skipped or deferred at least one address
updating wait-t1 database
-added to list for 127.0.0.1
+added 10HmaX-0005vi-00 to queue for 127.0.0.1
Leaving t1 transport
LOG: MAIN
== userx@test.ex R=r1 T=t1 defer (dd): Connection refused
SMTP>> writing message and terminating "."
SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
=> x@srv27.test.ex R=r1 T=t1 H=localhost.test.ex [127.0.0.1]:1224 C="250 OK"
added retry item for T:127.0.0.1:127.0.0.1:1224: errno=dd more_errno=dd,A flags=2
all IP addresses skipped or deferred at least one address
updating wait-t1 database
-added to list for 127.0.0.1
+added 10HmaZ-0005vi-00 to queue for 127.0.0.1
Leaving t1 transport
set_process_info: pppp delivering 10HmaZ-0005vi-00 (just run t1 for CALLER@the.local.host.name in subprocess)
set_process_info: pppp delivering 10HmaZ-0005vi-00: waiting for a remote delivery subprocess to finish
127.0.0.1 [127.0.0.1]:1111 retry-status = unusable
all IP addresses skipped or deferred at least one address
updating wait-t1 database
-added to list for 127.0.0.1
+added 10HmaY-0005vi-00 to queue for 127.0.0.1
Leaving t1 transport
set_process_info: pppp delivering 10HmaY-0005vi-00 (just run t1 for usery@test.ex in subprocess)
set_process_info: pppp running queue: waiting for 10HmaY-0005vi-00 (pppp)
--- /dev/null
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+admin user
+LOG: MAIN
+ <= CALLER@myhost.test.ex U=CALLER P=local S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> tempreject@test.ex <--------
+send_to_server transport entered
+ tempreject@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmaZ-0005vi-00 to 127.0.0.1 [127.0.0.1] (tempreject@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250 OK
+using PIPELINING
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<tempreject@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for tempreject@test.ex
+ SMTP<< 250 OK rcpt
+sync_responses expect data
+ SMTP<< 300 go ahead
+ SMTP>> writing message and terminating "."
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 451 Service not available
+LOG: MAIN
+ H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 451 Service not available
+ok=0 send_quit=0 send_rset=1 continue_more=0 yield=0 first_address is NULL
+ SMTP<< 221 Closing connection
+ SMTP(close)>>
+added retry item for T:127.0.0.1:127.0.0.1:1225:10HmaZ-0005vi-00: errno=-46 more_errno=dd,A flags=6
+all IP addresses skipped or deferred at least one address
+Leaving send_to_server transport
+LOG: MAIN
+ == tempreject@test.ex R=client T=send_to_server defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 451 Service not available
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+admin user
+LOG: MAIN
+ <= CALLER@myhost.test.ex U=CALLER P=local S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> permreject@test.ex <--------
+send_to_server transport entered
+ permreject@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+no host retry record
+no message retry record
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmbA-0005vi-00 to 127.0.0.1 [127.0.0.1] (permreject@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250 OK
+using PIPELINING
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<permreject@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for permreject@test.ex
+ SMTP<< 250 OK rcpt
+sync_responses expect data
+ SMTP<< 300 go ahead
+ SMTP>> writing message and terminating "."
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 550 content rejected
+ok=0 send_quit=0 send_rset=1 continue_more=0 yield=0 first_address is NULL
+ SMTP<< 221 Closing connection
+ SMTP(close)>>
+Leaving send_to_server transport
+LOG: MAIN
+ ** permreject@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after end of data: 550 content rejected
+LOG: MAIN
+ permreject@test.ex: error ignored
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+admin user
+LOG: MAIN
+ <= CALLER@myhost.test.ex U=CALLER P=local S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> permreject@test.ex <--------
+send_to_server transport entered
+ permreject@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+no host retry record
+no message retry record
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmbB-0005vi-00 to 127.0.0.1 [127.0.0.1] (permreject@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250 OK
+using PIPELINING
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<permreject@test.ex>
+ SMTP>> DATA
+cmd buf flush ddd bytes
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for permreject@test.ex
+ SMTP<< 250 OK rcpt
+sync_responses expect data
+ SMTP<< 300 go ahead
+ SMTP>> writing message and terminating "."
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP(closed)<<
+LOG: MAIN
+ H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to end of data
+ok=0 send_quit=0 send_rset=1 continue_more=0 yield=0 first_address is NULL
+ SMTP(closed)<<
+ SMTP(close)>>
+added retry item for T:127.0.0.1:127.0.0.1:1225:10HmbB-0005vi-00: errno=-18 more_errno=dd,A flags=6
+all IP addresses skipped or deferred at least one address
+Leaving send_to_server transport
+LOG: MAIN
+ == permreject@test.ex R=client T=send_to_server defer (-18) H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to end of data
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
--- /dev/null
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+LOG: smtp_connection MAIN
+ SMTP connection from root
+created log directory TESTSUITE/spool/log
+LOG: MAIN
+ <= fred@myhost.test.ex U=root P=local-smtp S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> good@test.ex <--------
+send_to_server transport entered
+ good@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmaX-0005vi-00 to 127.0.0.1 [127.0.0.1] (good@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250-CHUNKING
+ 250 OK
+using PIPELINING
+CHUNKING usable
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<good@test.ex>
+ will write message using CHUNKING
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+ SMTP+> BDAT 313 LAST
+cmd buf flush ddd bytes (more expected)
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for good@test.ex
+ SMTP<< 250 OK rcpt
+ SMTP<< 250 OK chunked message data
+ok=1 send_quit=0 send_rset=0 continue_more=0 yield=0 first_address is NULL
+ SMTP<< 221 Closing connection
+ SMTP(close)>>
+Leaving send_to_server transport
+LOG: MAIN
+ => good@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] L K C="250 OK chunked message data"
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+LOG: smtp_connection MAIN
+ SMTP connection from root
+LOG: MAIN
+ <= fred@myhost.test.ex U=root P=local-smtp S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> nopipe@test.ex <--------
+send_to_server transport entered
+ nopipe@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmaY-0005vi-00 to 127.0.0.1 [127.0.0.1] (nopipe@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-CHUNKING
+ 250 OK
+not using PIPELINING
+CHUNKING usable
+not using DSN
+ SMTP>> MAIL FROM:<>
+cmd buf flush ddd bytes
+ SMTP<< 250 OK mail
+ SMTP>> RCPT TO:<nopipe@test.ex>
+cmd buf flush ddd bytes
+sync_responses expect rcpt for nopipe@test.ex
+ SMTP<< 250 OK rcpt
+ will write message using CHUNKING
+ SMTP+> BDAT 315 LAST
+cmd buf flush ddd bytes (more expected)
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300
+ SMTP<< 250 OK chunked message data
+ok=1 send_quit=1 send_rset=0 continue_more=0 yield=0 first_address is NULL
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 221 Closing connection
+ SMTP(close)>>
+Leaving send_to_server transport
+LOG: MAIN
+ => nopipe@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] K C="250 OK chunked message data"
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+LOG: smtp_connection MAIN
+ SMTP connection from root
+LOG: MAIN
+ <= fred@myhost.test.ex U=root P=local-smtp S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> tempreject@test.ex <--------
+send_to_server transport entered
+ tempreject@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmaZ-0005vi-00 to 127.0.0.1 [127.0.0.1] (tempreject@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250-CHUNKING
+ 250 OK
+using PIPELINING
+CHUNKING usable
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<tempreject@test.ex>
+ will write message using CHUNKING
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+ SMTP+> BDAT 319 LAST
+cmd buf flush ddd bytes (more expected)
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for tempreject@test.ex
+ SMTP<< 250 OK rcpt
+ SMTP<< 451 Service not available
+LOG: MAIN
+ H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 451 Service not available
+ok=0 send_quit=0 send_rset=1 continue_more=0 yield=0 first_address is NULL
+ SMTP<< 221 Closing connection
+ SMTP(close)>>
+added retry item for T:127.0.0.1:127.0.0.1:1225:10HmaZ-0005vi-00: errno=-46 more_errno=dd,A flags=6
+all IP addresses skipped or deferred at least one address
+Leaving send_to_server transport
+LOG: MAIN
+ == tempreject@test.ex R=client T=send_to_server defer (-46) H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 451 Service not available
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+LOG: smtp_connection MAIN
+ SMTP connection from root
+LOG: MAIN
+ <= fred@myhost.test.ex U=root P=local-smtp S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> permreject@test.ex <--------
+send_to_server transport entered
+ permreject@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+no host retry record
+no message retry record
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmbA-0005vi-00 to 127.0.0.1 [127.0.0.1] (permreject@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250-CHUNKING
+ 250 OK
+using PIPELINING
+CHUNKING usable
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<permreject@test.ex>
+ will write message using CHUNKING
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+ SMTP+> BDAT 319 LAST
+cmd buf flush ddd bytes (more expected)
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for permreject@test.ex
+ SMTP<< 250 OK rcpt
+ SMTP<< 550 content rejected
+ok=0 send_quit=0 send_rset=1 continue_more=0 yield=0 first_address is NULL
+ SMTP<< 221 Closing connection
+ SMTP(close)>>
+Leaving send_to_server transport
+LOG: MAIN
+ ** permreject@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]: SMTP error from remote mail server after pipelined end of data: 550 content rejected
+LOG: MAIN
+ permreject@test.ex: error ignored
+LOG: MAIN
+ Completed
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+LOG: smtp_connection MAIN
+ SMTP connection from root
+LOG: MAIN
+ <= fred@myhost.test.ex U=root P=local-smtp S=sss
+Exim version x.yz ....
+configuration file is TESTSUITE/test-config
+trusted user
+admin user
+dropping to exim gid; retaining priv uid
+>>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>
+--------> dataloss@test.ex <--------
+send_to_server transport entered
+ dataloss@test.ex
+using the transport's hosts: 127.0.0.1
+getting address for 127.0.0.1
+checking status of 127.0.0.1
+no host retry record
+no message retry record
+127.0.0.1 [127.0.0.1]:1111 retry-status = usable
+delivering 10HmbB-0005vi-00 to 127.0.0.1 [127.0.0.1] (dataloss@test.ex)
+Connecting to 127.0.0.1 [127.0.0.1]:1225 ... connected
+ SMTP<< 220 Server ready
+ SMTP>> EHLO myhost.test.ex
+cmd buf flush ddd bytes
+ SMTP<< 250-hi there
+ 250-PIPELINING
+ 250-CHUNKING
+ 250 OK
+using PIPELINING
+CHUNKING usable
+not using DSN
+ SMTP|> MAIL FROM:<>
+ SMTP|> RCPT TO:<dataloss@test.ex>
+ will write message using CHUNKING
+transport_check_waiting entered
+ sequence=1 local_max=500 global_max=-1
+ no messages waiting for 127.0.0.1
+transport_check_waiting: FALSE
+will pipeline QUIT
+ SMTP+> BDAT 317 LAST
+cmd buf flush ddd bytes (more expected)
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
+ SMTP+> QUIT
+cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+sync_responses expect mail
+ SMTP<< 250 OK mail
+sync_responses expect rcpt for dataloss@test.ex
+ SMTP<< 250 OK rcpt
+ SMTP(closed)<<
+LOG: MAIN
+ H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to pipelined end of data
+ok=0 send_quit=0 send_rset=1 continue_more=0 yield=0 first_address is NULL
+ SMTP(closed)<<
+ SMTP(close)>>
+added retry item for T:127.0.0.1:127.0.0.1:1225:10HmbB-0005vi-00: errno=-18 more_errno=dd,A flags=6
+all IP addresses skipped or deferred at least one address
+Leaving send_to_server transport
+LOG: MAIN
+ == dataloss@test.ex R=client T=send_to_server defer (-18) H=127.0.0.1 [127.0.0.1]: Remote host closed connection in response to pipelined end of data
+>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+LOG: smtp_connection MAIN
+ SMTP connection from root closed by QUIT
+>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
SMTP>> writing message and terminating "."
+ SMTP>> QUIT
SMTP<< 250 OK id=10HmaZ-0005vi-00
- SMTP+> QUIT
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> CALLER@test.ex R=client T=send_to_server1 H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmaZ-0005vi-00"
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
SMTP>> writing message and terminating "."
+ SMTP>> QUIT
SMTP<< 250 OK id=10HmbA-0005vi-00
- SMTP+> QUIT
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> CALLER@test.ex R=client T=send_to_server1 H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbA-0005vi-00"
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
SMTP>> writing message and terminating "."
+ SMTP>> QUIT
SMTP<< 250 OK id=10HmbB-0005vi-00
- SMTP+> QUIT
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> abcd@test.ex R=client T=send_to_server2 H=ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbB-0005vi-00"
SMTP<< 250 OK
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
- SMTP<< 250 OK id=10HmbC-0005vi-00
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP(TLS shutdown)>>
+ SMTP<< 250 OK id=10HmbC-0005vi-00
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
->>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: MAIN
=> usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbC-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (continued-transport) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: queue_run MAIN
End queue run: pid=pppp -qqf
>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
SMTP<< 250 OK
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
- SMTP<< 250 OK id=10HmbI-0005vi-00
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP(TLS shutdown)>>
+ SMTP<< 250 OK id=10HmbI-0005vi-00
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
->>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: MAIN
=> userb@test.ex R=cl_override T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmbI-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (continued-transport) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
LOG: queue_run MAIN
End queue run: pid=pppp -qqf
>>>>>>>>>>>>>>>> Exim pid=pppp (fresh-exec) terminating with rc=0 >>>>>>>>>>>>>>>>
250-PIPELINING
250 HELP
SMTP|> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
- SMTP|> RCPT TO:<userx@test.ex>
+ SMTP|> RCPT TO:<user_p@test.ex>
SMTP>> DATA
cmd buf flush ddd bytes
SMTP<< 250 OK
250 HELP
SMTP(close)>>
LOG: MAIN
- => userx@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbM-0005vi-00"
+ => user_p@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbM-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (qrun-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
250-PIPELINING
250 HELP
SMTP|> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
- SMTP|> RCPT TO:<userz@test.ex>
+ SMTP|> RCPT TO:<user_r@test.ex>
SMTP>> DATA
cmd buf flush ddd bytes
SMTP<< 250 OK
250 HELP
SMTP(close)>>
LOG: MAIN
- => userz@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbN-0005vi-00"
+ => user_r@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbN-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (continued-transport) terminating with rc=0 >>>>>>>>>>>>>>>>
250-PIPELINING
250 HELP
SMTP|> MAIL FROM:<CALLER@myhost.test.ex> SIZE=ssss
- SMTP|> RCPT TO:<usery@test.ex>
+ SMTP|> RCPT TO:<user_q@test.ex>
SMTP>> DATA
cmd buf flush ddd bytes
SMTP<< 250 OK
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
+ SMTP>> QUIT
+cmd buf flush ddd bytes
SMTP<< 250 OK id=10HmbO-0005vi-00
- SMTP+> QUIT
-cmd buf flush ddd bytes (more expected)
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
- => usery@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbO-0005vi-00"
+ => user_q@test.ex R=client T=send_to_server H=127.0.0.1 [127.0.0.1]* X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbO-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (continued-transport) terminating with rc=0 >>>>>>>>>>>>>>>>
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
SMTP>> writing message and terminating "."
+ SMTP>> QUIT
SMTP<< 250 OK id=10HmaZ-0005vi-00
- SMTP+> QUIT
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> CALLER@test.ex R=client T=send_to_server1 H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmaZ-0005vi-00"
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
SMTP>> writing message and terminating "."
+ SMTP>> QUIT
SMTP<< 250 OK id=10HmbA-0005vi-00
- SMTP+> QUIT
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> CALLER@test.ex R=client T=send_to_server1 H=127.0.0.1 [127.0.0.1] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbA-0005vi-00"
SMTP<< 250 Accepted
SMTP<< 354 Enter message, ending with "." on a line by itself
SMTP>> writing message and terminating "."
+ SMTP>> QUIT
SMTP<< 250 OK id=10HmbB-0005vi-00
- SMTP+> QUIT
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> abcd@test.ex R=client T=send_to_server2 H=ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=yes C="250 OK id=10HmbB-0005vi-00"
ok=1 send_quit=1 send_rset=0 continue_more=0 yield=0 first_address is NULL
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP(TLS shutdown)>>
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
->>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
Leaving t1 transport
LOG: MAIN
=> userb@test.ex R=client T=t1 H=127.0.0.1 [127.0.0.1]:1225 X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmaY-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
******** SERVER ********
ok=1 send_quit=1 send_rset=0 continue_more=0 yield=0 first_address is NULL
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP(TLS shutdown)>>
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
->>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
Leaving t1 transport
LOG: MAIN
=> userb@test.ex R=client T=t1 H=127.0.0.1 [127.0.0.1]:1225 X=TLS1.x:ke-RSA-AES256-SHAnnn:xxx CV=no C="250 OK id=10HmaY-0005vi-00"
LOG: MAIN
Completed
>>>>>>>>>>>>>>>> Exim pid=pppp (local-accept-delivery) terminating with rc=0 >>>>>>>>>>>>>>>>
+>>>>>>>>>>>>>>>> Exim pid=pppp (tls-proxy) terminating with rc=0 >>>>>>>>>>>>>>>>
******** SERVER ********
SMTP>> writing message and terminating "."
SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
=> userx@domain.com R=all T=smtp H=127.0.0.1 [127.0.0.1] A=plain C="250 OK"
SMTP>> writing message and terminating "."
SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
=> userx@domain.com R=all T=smtp H=127.0.0.1 [127.0.0.1] A=plain C="250 OK"
SMTP>> writing message and terminating "."
SMTP<< 250 OK
SMTP+> QUIT
+ SMTP(shutdown)>>
+ SMTP<< 250 OK
SMTP(close)>>
LOG: MAIN
=> userx@domain.com R=all T=smtp H=127.0.0.1 [127.0.0.1] A=login C="250 OK"
sync_responses expect data
SMTP<< 354 data go-ahead
SMTP>> writing message and terminating "."
-cannot use sendfile for body: spoolfile not wireformat
-writing data block fd=dddd size=sss timeout=300
- SMTP<< 250 message accepted
-ok=1 send_quit=1 send_rset=0 continue_more=0 yield=0 first_address is NULL
transport_check_waiting entered
sequence=1 local_max=500 global_max=-1
no messages waiting for 127.0.0.1
transport_check_waiting: FALSE
+will pipeline QUIT
+cannot use sendfile for body: spoolfile not wireformat
+writing data block fd=dddd size=sss timeout=300 (more expected)
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 250 message accepted
+ok=1 send_quit=0 send_rset=0 continue_more=0 yield=0 first_address is NULL
+ SMTP<< 220 bye
SMTP(close)>>
Leaving smtp transport
LOG: MAIN
DKIM >> Signed DKIM-Signature header, canonicalized (relaxed) >>>>>>>
dkim-signature:v=1;{SP}a=rsa-sha256;{SP}q=dns/txt;{SP}c=relaxed/relaxed;{SP}d=test.ex;{SP}s=sel_bad;{SP}h=From;{SP}bh=/Ab0giHZitYQbDhFszoqQRUkgqueaX9zatJttIU/plc=;{SP}b=;
DKIM [test.ex] Header sha256 computed: 241e16230df5723d899cfae9474c6b376a2ab1f81d1094e358f50ffd0e0067b3
- SMTP<< 250 OK id=10HmbL-0005vi-00
SMTP+> QUIT
cmd buf flush ddd bytes (more expected)
+ SMTP(shutdown)>>
+ SMTP<< 250 OK id=10HmbL-0005vi-00
+ SMTP<< 221 myhost.test.ex closing connection
SMTP(close)>>
LOG: MAIN
=> d@test.ex R=client T=send_to_server H=ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4] C="250 OK id=10HmbL-0005vi-00"
--- /dev/null
+Message 10HmaZ-0005vi-00 has been removed
+Message 10HmbB-0005vi-00 has been removed
+
+******** SERVER ********
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<good@test.ex>
+250 OK rcpt
+DATA
+300 go ahead
+Received: from CALLER by myhost.test.ex with local (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmaX-0005vi-00
+ for good@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+Message-Id: <E10HmaX-0005vi-00@myhost.test.ex>
+From: CALLER_NAME <CALLER@myhost.test.ex>
+Date: Tue, 2 Mar 1999 09:44:33 +0000
+
+.
+QUIT
+250 OK message data
+221 Closing connection
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<nopipe@test.ex>
+250 OK rcpt
+DATA
+300 go ahead
+Received: from CALLER by myhost.test.ex with local (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmaY-0005vi-00
+ for nopipe@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+Message-Id: <E10HmaY-0005vi-00@myhost.test.ex>
+From: CALLER_NAME <CALLER@myhost.test.ex>
+Date: Tue, 2 Mar 1999 09:44:33 +0000
+
+.
+250 OK message data
+*sleep 1
+<<QUIT
+Unexpected EOF read from client
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<tempreject@test.ex>
+250 OK rcpt
+DATA
+300 go ahead
+Received: from CALLER by myhost.test.ex with local (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmaZ-0005vi-00
+ for tempreject@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+Message-Id: <E10HmaZ-0005vi-00@myhost.test.ex>
+From: CALLER_NAME <CALLER@myhost.test.ex>
+Date: Tue, 2 Mar 1999 09:44:33 +0000
+
+.
+QUIT
+451 Service not available
+221 Closing connection
+Expected EOF read from client
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<permreject@test.ex>
+250 OK rcpt
+DATA
+300 go ahead
+Received: from CALLER by myhost.test.ex with local (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbA-0005vi-00
+ for permreject@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+Message-Id: <E10HmbA-0005vi-00@myhost.test.ex>
+From: CALLER_NAME <CALLER@myhost.test.ex>
+Date: Tue, 2 Mar 1999 09:44:33 +0000
+
+.
+QUIT
+550 content rejected
+221 Closing connection
+Expected EOF read from client
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<permreject@test.ex>
+250 OK rcpt
+DATA
+300 go ahead
+Received: from CALLER by myhost.test.ex with local (Exim x.yz)
+ (envelope-from <CALLER@myhost.test.ex>)
+ id 10HmbB-0005vi-00
+ for permreject@test.ex; Tue, 2 Mar 1999 09:44:33 +0000
+Message-Id: <E10HmbB-0005vi-00@myhost.test.ex>
+From: CALLER_NAME <CALLER@myhost.test.ex>
+Date: Tue, 2 Mar 1999 09:44:33 +0000
+
+.
+>*eof
+End of script
250-PIPELINING
250 CHUNKING
MAIL FROM:<>
-RCPT TO:<q@test.ex>
-BDAT 329 LAST
-Unexpected EOF read from client
-Listening on port 1224 ...
-Connection request from [127.0.0.1]
-220 Greetings
-EHLO testhost.test.ex
-250-Hello there
-250-PIPELINING
-250 CHUNKING
-MAIL FROM:<>
RCPT TO:<r@test.ex>
BDAT 329 LAST
250 OK mail
--- /dev/null
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250 myhost.test.ex Hello root at tester\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaX-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250 myhost.test.ex Hello root at tester\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaY-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250 myhost.test.ex Hello root at tester\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmaZ-0005vi-00\r
+221 myhost.test.ex closing connection\r
+Message 10HmaZ-0005vi-00 has been removed
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250 myhost.test.ex Hello root at tester\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmbA-0005vi-00\r
+221 myhost.test.ex closing connection\r
+220 myhost.test.ex ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000\r
+250 myhost.test.ex Hello root at tester\r
+250 OK\r
+250 Accepted\r
+354 Enter message, ending with "." on a line by itself\r
+250 OK id=10HmbB-0005vi-00\r
+221 myhost.test.ex closing connection\r
+Message 10HmbB-0005vi-00 has been removed
+
+******** SERVER ********
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM:<>
+RCPT TO:<good@test.ex>
+BDAT 313 LAST
+250 OK mail
+250 OK rcpt
+QUIT
+250 OK chunked message data
+221 Closing connection
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-CHUNKING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<nopipe@test.ex>
+250 OK rcpt
+BDAT 315 LAST
+250 OK chunked message data
+QUIT
+221 Closing connection
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<tempreject@test.ex>
+250 OK rcpt
+BDAT 319 LAST
+QUIT
+451 Service not available
+221 Closing connection
+Expected EOF read from client
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<permreject@test.ex>
+250 OK rcpt
+BDAT 319 LAST
+QUIT
+550 content rejected
+221 Closing connection
+Expected EOF read from client
+End of script
+Listening on port 1225 ...
+Connection request from [127.0.0.1]
+220 Server ready
+EHLO myhost.test.ex
+250-hi there
+250-PIPELINING
+250-CHUNKING
+250 OK
+MAIL FROM:<>
+250 OK mail
+RCPT TO:<dataloss@test.ex>
+250 OK rcpt
+BDAT 317 LAST
+>*eof
+End of script
git://git.exim.org / users / heiko / exim.git / commitdiff