4 This file contains descriptions of new features that have been added to Exim.
5 Before a formal release, there may be quite a lot of detail so that people can
6 test from the snapshots or the CVS before the documentation is updated. Once
7 the documentation is updated, this file is reduced to a short list.
12 1. New command-line option -bI:sieve will list all supported sieve extensions
13 of this Exim build on standard output, one per line.
14 ManageSieve (RFC 5804) providers managing scripts for use by Exim should
15 query this to establish the correct list to include in the protocol's
16 SIEVE capability line.
18 2. If the -n option is combined with the -bP option, then the name of an
19 emitted option is not output, only the value (if visible to you).
20 For instance, "exim -n -bP pid_file_path" should just emit a pathname
21 followed by a newline, and no other text.
23 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
24 has a "tls_dh_min_bits" option, to set the minimum acceptable number of
25 bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
26 acceptable for security. (Option accepted but ignored if using OpenSSL).
27 Defaults to 1024, the old value. May be lowered only to 512, or raised as
28 far as you like. Raising this may hinder TLS interoperability with other
29 sites and is not currently recommended. Lowering this will permit you to
30 establish a TLS session which is not as secure as you might like.
32 Unless you really know what you are doing, leave it alone.
34 4. If not built with DISABLE_DNSSEC, Exim now has the main option
35 dns_use_dnssec; if set to 1 then Exim will initialise the resolver library
36 to send the DO flag to your recursive resolver. If you have a recursive
37 resolver, which can set the Authenticated Data (AD) flag in results, Exim
40 Current status: work-in-progress; $sender_host_dnssec variable added.
42 5. DSCP support for outbound connections: on a transport using the smtp driver,
43 set "dscp = ef", for instance, to cause the connections to have the relevant
44 DSCP (IPv4 TOS or IPv6 TCLASS) value in the header.
46 Similarly for inbound connections, there is a new control modifier, dscp,
47 so "warn control = dscp/ef" in the connect ACL, or after authentication.
49 Supported values depend upon system libraries. "exim -bI:dscp" to list the
50 ones Exim knows of. You can also set a raw number 0..0x3F.
56 1. New authenticator driver, "gsasl". Server-only (at present).
57 This is a SASL interface, licensed under GPL, which can be found at
58 http://www.gnu.org/software/gsasl/.
59 This system does not provide sources of data for authentication, so
60 careful use needs to be made of the conditions in Exim.
62 2. New authenticator driver, "heimdal_gssapi". Server-only.
63 A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
64 is no longer honoured for setuid programs by Heimdal. Use the
65 "server_keytab" option to point to the keytab.
67 3. The "pkg-config" system can now be used when building Exim to reference
68 cflags and library information for lookups and authenticators, rather
69 than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and
70 "LOOKUP_LIBS" directly. Similarly for handling the TLS library support
71 without adjusting "TLS_INCLUDE" and "TLS_LIBS".
73 In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to
74 find the headers and libraries for PCRE.
76 4. New expansion variable $tls_bits.
78 5. New lookup type, "dbmjz". Key is an Exim list, the elements of which will
79 be joined together with ASCII NUL characters to construct the key to pass
80 into the DBM library. Can be used with gsasl to access sasldb2 files as
83 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1.
85 Avoid release 1.0.1a if you can. Note that the default value of
86 "openssl_options" is no longer "+dont_insert_empty_fragments", as that
87 increased susceptibility to attack. This may still have interoperability
88 implications for very old clients (see version 4.31 change 37) but
89 administrators can choose to make the trade-off themselves and restore
90 compatibility at the cost of session security.
92 7. Use of the new expansion variable $tls_sni in the main configuration option
93 tls_certificate will cause Exim to re-expand the option, if the client
94 sends the TLS Server Name Indication extension, to permit choosing a
95 different certificate; tls_privatekey will also be re-expanded. You must
96 still set these options to expand to valid files when $tls_sni is not set.
98 The SMTP Transport has gained the option tls_sni, which will set a hostname
99 for outbound TLS sessions, and set $tls_sni too.
101 A new log_selector, +tls_sni, has been added, to log received SNI values
102 for Exim as a server.
104 8. The existing "accept_8bitmime" option now defaults to true. This means
105 that Exim is deliberately not strictly RFC compliant. We're following
106 Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default.
107 Those who disagree, or know that they are talking to mail servers that,
108 even today, are not 8-bit clean, need to turn off this option.
110 9. Exim can now be started with -bw (with an optional timeout, given as
111 -bw<timespec>). With this, stdin at startup is a socket that is
112 already listening for connections. This has a more modern name of
113 "socket activation", but forcing the activated socket to fd 0. We're
114 interested in adding more support for modern variants.
116 10. ${eval } now uses 64-bit values on supporting platforms. A new "G" suffix
117 for numbers indicates multiplication by 1024^3.
119 11. The GnuTLS support has been revamped; the three options gnutls_require_kx,
120 gnutls_require_mac & gnutls_require_protocols are no longer supported.
121 tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority
122 string, documentation for which is at:
123 http://www.gnu.org/software/gnutls/manual/html_node/Priority-Strings.html
125 SNI support has been added to Exim's GnuTLS integration too.
127 For sufficiently recent GnuTLS libraries, ${randint:..} will now use
128 gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness.
130 12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file
131 is now available. If the contents of the file are valid, then Exim will
132 send that back in response to a TLS status request; this is OCSP Stapling.
133 Exim will not maintain the contents of the file in any way: administrators
134 are responsible for ensuring that it is up-to-date.
136 See "experimental-spec.txt" for more details.
138 13. ${lookup dnsdb{ }} supports now SPF record types. They are handled
139 identically to TXT record lookups.
141 14. New expansion variable $tod_epoch_l for higher-precision time.
143 15. New global option tls_dh_max_bits, defaulting to current value of NSS
144 hard-coded limit of DH ephemeral bits, to fix interop problems caused by
145 GnuTLS 2.12 library recommending a bit count higher than NSS supports.
147 16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier.
148 Option can now be a path or an identifier for a standard prime.
149 If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23".
150 Set to "historic" to get the old GnuTLS behaviour of auto-generated DH
153 17. SSLv2 now disabled by default in OpenSSL. (Never supported by GnuTLS).
154 Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL
155 install was not built with OPENSSL_NO_SSL2 ("no-ssl2").
161 1. New options for the ratelimit ACL condition: /count= and /unique=.
162 The /noupdate option has been replaced by a /readonly option.
164 2. The SMTP transport's protocol option may now be set to "smtps", to
165 use SSL-on-connect outbound.
167 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
168 there is a problem talking to the AV scanner, or the AV scanner running.
170 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
171 and check if the search item is a member of the list. This does not
172 support named lists, but does subject the list part to string expansion.
174 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was
175 built, Exim no longer performs string expansion on the second string of
176 the match_* expansion conditions: "match_address", "match_domain",
177 "match_ip" & "match_local_part". Named lists can still be used.
183 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on
184 or off in the resolver library.
190 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there
191 is now LDAP/TLS support, given sufficiently modern OpenLDAP client
192 libraries. The following global options have been added in support of
193 this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key,
194 ldap_cipher_suite, ldap_require_cert, ldap_start_tls.
196 2. The pipe transport now takes a boolean option, "freeze_signal", default
197 false. When true, if the external delivery command exits on a signal then
198 Exim will freeze the message in the queue, instead of generating a bounce.
200 3. Log filenames may now use %M as an escape, instead of %D (still available).
201 The %M pattern expands to yyyymm, providing month-level resolution.
203 4. The $message_linecount variable is now updated for the maildir_tag option,
204 in the same way as $message_size, to reflect the real number of lines,
205 including any header additions or removals from transport.
207 5. When contacting a pool of SpamAssassin servers configured in spamd_address,
208 Exim now selects entries randomly, to better scale in a cluster setup.
214 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux)
215 the flaw permitted the Exim run-time user to cause root to append to
216 arbitrary files of the attacker's choosing, with the content based
217 on content supplied by the attacker.
219 2. Exim now supports loading some lookup types at run-time, using your
220 platform's dlopen() functionality. This has limited platform support
221 and the intention is not to support every variant, it's limited to
222 dlopen(). This permits the main Exim binary to not be linked against
223 all the libraries needed for all the lookup types.
229 NOTE: this version is not guaranteed backwards-compatible, please read the
230 items below carefully
232 1. A new main configuration option, "openssl_options", is available if Exim
233 is built with SSL support provided by OpenSSL. The option allows
234 administrators to specify OpenSSL options to be used on connections;
235 typically this is to set bug compatibility features which the OpenSSL
236 developers have not enabled by default. There may be security
237 consequences for certain options, so these should not be changed
240 2. A new pipe transport option, "permit_coredumps", may help with problem
241 diagnosis in some scenarios. Note that Exim is typically installed as
242 a setuid binary, which on most OSes will inhibit coredumps by default,
243 so that safety mechanism would have to be overridden for this option to
244 be able to take effect.
246 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
247 Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
248 Note that this switches Exim to use a new API ("INSTREAM") and a future
249 release of ClamAV will remove support for the old API ("STREAM").
251 The av_scanner option, when set to "clamd", now takes an optional third
252 part, "local", which causes Exim to pass a filename to ClamAV instead of
253 the file content. This is the same behaviour as when clamd is pointed at
254 a Unix-domain socket. For example:
256 av_scanner = clamd:192.0.2.3 1234:local
258 ClamAV's ExtendedDetectionInfo response format is now handled.
260 4. There is now a -bmalware option, restricted to admin users. This option
261 takes one parameter, a filename, and scans that file with Exim's
262 malware-scanning framework. This is intended purely as a debugging aid
263 to ensure that Exim's scanning is working, not to replace other tools.
264 Note that the ACL framework is not invoked, so if av_scanner references
265 ACL variables without a fallback then this will fail.
267 5. There is a new expansion operator, "reverse_ip", which will reverse IP
268 addresses; IPv4 into dotted quad, IPv6 into dotted nibble. Examples:
270 ${reverse_ip:192.0.2.4}
272 ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
273 -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
275 6. There is a new ACL control called "debug", to enable debug logging.
276 This allows selective logging of certain incoming transactions within
277 production environments, with some care. It takes two options, "tag"
278 and "opts"; "tag" is included in the filename of the log and "opts"
279 is used as per the -d<options> command-line option. Examples, which
280 don't all make sense in all contexts:
283 control = debug/tag=.$sender_host_address
284 control = debug/opts=+expand+acl
285 control = debug/tag=.$message_exim_id/opts=+expand
287 7. It has always been implicit in the design and the documentation that
288 "the Exim user" is not root. src/EDITME said that using root was
289 "very strongly discouraged". This is not enough to keep people from
290 shooting themselves in the foot in days when many don't configure Exim
291 themselves but via package build managers. The security consequences of
292 running various bits of network code are severe if there should be bugs in
293 them. As such, the Exim user may no longer be root. If configured
294 statically, Exim will refuse to build. If configured as ref:user then Exim
295 will exit shortly after start-up. If you must shoot yourself in the foot,
296 then henceforth you will have to maintain your own local patches to strip
299 8. There is a new expansion operator, bool_lax{}. Where bool{} uses the ACL
300 condition logic to determine truth/failure and will fail to expand many
301 strings, bool_lax{} uses the router condition logic, where most strings
303 Note: bool{00} is false, bool_lax{00} is true.
305 9. Routers now support multiple "condition" tests,
307 10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
308 Setting this allows an admin to define which entry in the tcpwrappers
309 config file will be used to control access to the daemon. This option
310 is only available when Exim is built with USE_TCP_WRAPPERS. The
311 default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
314 11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
315 the Exim run-time user, instead of root.
317 12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
318 is forced on. This is mitigated by the new build option
319 TRUSTED_CONFIG_LIST which defines a list of configuration files which
320 are trusted; one per line. If a config file is owned by root and matches
321 a pathname in the list, then it may be invoked by the Exim build-time
322 user without Exim relinquishing root privileges.
324 13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
325 trusted to supply -D<Macro[=Value]> overrides on the command-line. Going
326 forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
327 include the main config. As a transition mechanism, we are temporarily
328 providing a work-around: the new build option WHITELIST_D_MACROS provides
329 a colon-separated list of macro names which may be overridden by the Exim
330 run-time user. The values of these macros are constrained to the regex
331 ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
337 1. TWO SECURITY FIXES: one relating to mail-spools which are globally
338 writable, the other to locking of MBX folders (not mbox).
340 2. MySQL stored procedures are now supported.
342 3. The dkim_domain transport option is now a list, not a single string, and
343 messages will be signed for each element in the list (discarding
346 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups
347 in the presence of multiple character strings within the RR. Prior to 4.70,
348 only the first string would be returned. The dnsdb lookup now, by default,
349 preserves the pre-4.70 semantics, but also now takes an extended output
350 separator specification. The separator can be followed by a semicolon, to
351 concatenate the individual text strings together with no join character,
352 or by a comma and a second separator character, in which case the text
353 strings within a TXT record are joined on that second character.
354 Administrators are reminded that DNS provides no ordering guarantees
355 between multiple records in an RRset. For example:
357 foo.example. IN TXT "a" "b" "c"
358 foo.example. IN TXT "d" "e" "f"
360 ${lookup dnsdb{>/ txt=foo.example}} -> "a/d"
361 ${lookup dnsdb{>/; txt=foo.example}} -> "def/abc"
362 ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f"
368 1. Native DKIM support without an external library.
369 (Note that if no action to prevent it is taken, a straight upgrade will
370 result in DKIM verification of all signed incoming emails. See spec
371 for details on conditionally disabling)
373 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha).
375 3. There is now a bool{} expansion condition which maps certain strings to
376 true/false condition values (most likely of use in conjunction with the
377 and{} expansion operator).
379 4. The $spam_score, $spam_bar and $spam_report variables are now available
382 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as
383 options, provided that Exim is invoked by an admin_user.
385 6. There is a new option gnutls_compat_mode, when linked against GnuTLS,
386 which increases compatibility with older clients at the cost of decreased
387 security. Don't set this unless you need to support such clients.
389 7. There is a new expansion operator, ${randint:...} which will produce a
390 "random" number less than the supplied integer. This randomness is
391 not guaranteed to be cryptographically strong, but depending upon how
392 Exim was built may be better than the most naive schemes.
394 8. Exim now explicitly ensures that SHA256 is available when linked against
397 9. The transport_filter_timeout option now applies to SMTP transports too.
403 1. Preliminary DKIM support in Experimental.
409 1. The body_linecount and body_zerocount C variables are now exported in the
412 2. When a dnslists lookup succeeds, the key that was looked up is now placed
413 in $dnslist_matched. When the key is an IP address, it is not reversed in
414 this variable (though it is, of course, in the actual lookup). In simple
417 deny dnslists = spamhaus.example
419 the key is also available in another variable (in this case,
420 $sender_host_address). In more complicated cases, however, this is not
421 true. For example, using a data lookup might generate a dnslists lookup
424 deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
426 If this condition succeeds, the value in $dnslist_matched might be
427 192.168.6.7 (for example).
429 3. Authenticators now have a client_condition option. When Exim is running as
430 a client, it skips an authenticator whose client_condition expansion yields
431 "0", "no", or "false". This can be used, for example, to skip plain text
432 authenticators when the connection is not encrypted by a setting such as:
434 client_condition = ${if !eq{$tls_cipher}{}}
436 Note that the 4.67 documentation states that $tls_cipher contains the
437 cipher used for incoming messages. In fact, during SMTP delivery, it
438 contains the cipher used for the delivery. The same is true for
441 4. There is now a -Mvc <message-id> option, which outputs a copy of the
442 message to the standard output, in RFC 2822 format. The option can be used
443 only by an admin user.
445 5. There is now a /noupdate option for the ratelimit ACL condition. It
446 computes the rate and checks the limit as normal, but it does not update
447 the saved data. This means that, in relevant ACLs, it is possible to lookup
448 the existence of a specified (or auto-generated) ratelimit key without
449 incrementing the ratelimit counter for that key.
451 In order for this to be useful, another ACL entry must set the rate
452 for the same key somewhere (otherwise it will always be zero).
457 # Read the rate; if it doesn't exist or is below the maximum
459 deny ratelimit = 100 / 5m / strict / noupdate
460 log_message = RATE: $sender_rate / $sender_rate_period \
461 (max $sender_rate_limit)
463 [... some other logic and tests...]
465 warn ratelimit = 100 / 5m / strict / per_cmd
466 log_message = RATE UPDATE: $sender_rate / $sender_rate_period \
467 (max $sender_rate_limit)
468 condition = ${if le{$sender_rate}{$sender_rate_limit}}
472 6. The variable $max_received_linelength contains the number of bytes in the
473 longest line that was received as part of the message, not counting the
474 line termination character(s).
476 7. Host lists can now include +ignore_defer and +include_defer, analagous to
477 +ignore_unknown and +include_unknown. These options should be used with
478 care, probably only in non-critical host lists such as whitelists.
480 8. There's a new option called queue_only_load_latch, which defaults true.
481 If set false when queue_only_load is greater than zero, Exim re-evaluates
482 the load for each incoming message in an SMTP session. Otherwise, once one
483 message is queued, the remainder are also.
485 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most
486 cases when an SMTP session ends without sending QUIT. However, when Exim
487 itself is is bad trouble, such as being unable to write to its log files,
488 this ACL is not run, because it might try to do things (such as write to
489 log files) that make the situation even worse.
491 Like the QUIT ACL, this new ACL is provided to make it possible to gather
492 statistics. Whatever it returns (accept or deny) is immaterial. The "delay"
493 modifier is forbidden in this ACL.
495 When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set
496 to a string that indicates the reason for the termination of the SMTP
497 connection. The possible values are:
499 acl-drop Another ACL issued a "drop" command
500 bad-commands Too many unknown or non-mail commands
501 command-timeout Timeout while reading SMTP commands
502 connection-lost The SMTP connection has been lost
503 data-timeout Timeout while reading message data
504 local-scan-error The local_scan() function crashed
505 local-scan-timeout The local_scan() function timed out
506 signal-exit SIGTERM or SIGINT
507 synchronization-error SMTP synchronization error
508 tls-failed TLS failed to start
510 In most cases when an SMTP connection is closed without having received
511 QUIT, Exim sends an SMTP response message before actually closing the
512 connection. With the exception of acl-drop, the default message can be
513 overridden by the "message" modifier in the NOTQUIT ACL. In the case of a
514 "drop" verb in another ACL, it is the message from the other ACL that is
517 10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of
518 servers with individual queries. This is done by starting the query with
519 "servers=x:y:z;", where each item in the list may take one of two forms:
521 (1) If it is just a host name, the appropriate global option (mysql_servers
522 or pgsql_servers) is searched for a host of the same name, and the
523 remaining parameters (database, user, password) are taken from there.
525 (2) If it contains any slashes, it is taken as a complete parameter set.
527 The list of servers is used in exactly the same was as the global list.
528 Once a connection to a server has happened and a query has been
529 successfully executed, processing of the lookup ceases.
531 This feature is intended for use in master/slave situations where updates
532 are occurring, and one wants to update a master rather than a slave. If the
533 masters are in the list for reading, you might have:
535 mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw
537 In an updating lookup, you could then write
539 ${lookup mysql{servers=master; UPDATE ...}
541 If, on the other hand, the master is not to be used for reading lookups:
543 pgsql_servers = slave1/db/name/pw:slave2/db/name/pw
545 you can still update the master by
547 ${lookup pgsql{servers=master/db/name/pw; UPDATE ...}
549 11. The message_body_newlines option (default FALSE, for backwards
550 compatibility) can be used to control whether newlines are present in
551 $message_body and $message_body_end. If it is FALSE, they are replaced by
558 1. There is a new log selector called smtp_no_mail, which is not included in
559 the default setting. When it is set, a line is written to the main log
560 whenever an accepted SMTP connection terminates without having issued a
563 2. When an item in a dnslists list is followed by = and & and a list of IP
564 addresses, the behaviour was not clear when the lookup returned more than
565 one IP address. This has been solved by the addition of == and =& for "all"
566 rather than the default "any" matching.
568 3. Up till now, the only control over which cipher suites GnuTLS uses has been
569 for the cipher algorithms. New options have been added to allow some of the
570 other parameters to be varied.
572 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is
573 set, Exim compiles a runtime option called disable_fsync.
575 5. There is a new variable called $smtp_count_at_connection_start.
577 6. There's a new control called no_pipelining.
579 7. There are two new variables called $sending_ip_address and $sending_port.
580 These are set whenever an SMTP connection to another host has been set up.
582 8. The expansion of the helo_data option in the smtp transport now happens
583 after the connection to the server has been made.
585 9. There is a new expansion operator ${rfc2047d: that decodes strings that
586 are encoded as per RFC 2047.
588 10. There is a new log selector called "pid", which causes the current process
589 id to be added to every log line, in square brackets, immediately after the
592 11. Exim has been modified so that it flushes SMTP output before implementing
593 a delay in an ACL. It also flushes the output before performing a callout,
594 as this can take a substantial time. These behaviours can be disabled by
595 obeying control = no_delay_flush or control = no_callout_flush,
596 respectively, at some earlier stage of the connection.
598 12. There are two new expansion conditions that iterate over a list. They are
599 called forany and forall.
601 13. There's a new global option called dsn_from that can be used to vary the
602 contents of From: lines in bounces and other automatically generated
603 messages ("delivery status notifications" - hence the name of the option).
605 14. The smtp transport has a new option called hosts_avoid_pipelining.
607 15. By default, exigrep does case-insensitive matches. There is now a -I option
608 that makes it case-sensitive.
610 16. A number of new features ("addresses", "map", "filter", and "reduce") have
611 been added to string expansions to make it easier to process lists of
612 items, typically addresses.
614 17. There's a new ACL modifier called "continue". It does nothing of itself,
615 and processing of the ACL always continues with the next condition or
616 modifier. It is provided so that the side effects of expanding its argument
619 18. It is now possible to use newline and other control characters (those with
620 values less than 32, plus DEL) as separators in lists.
622 19. The exigrep utility now has a -v option, which inverts the matching
625 20. The host_find_failed option in the manualroute router can now be set to
632 No new features were added to 4.66.
638 No new features were added to 4.65.
644 1. ACL variables can now be given arbitrary names, as long as they start with
645 "acl_c" or "acl_m" (for connection variables and message variables), are at
646 least six characters long, with the sixth character being either a digit or
649 2. There is a new ACL modifier called log_reject_target. It makes it possible
650 to specify which logs are used for messages about ACL rejections.
652 3. There is a new authenticator called "dovecot". This is an interface to the
653 authentication facility of the Dovecot POP/IMAP server, which can support a
654 number of authentication methods.
656 4. The variable $message_headers_raw provides a concatenation of all the
657 messages's headers without any decoding. This is in contrast to
658 $message_headers, which does RFC2047 decoding on the header contents.
660 5. In a DNS black list, if two domain names, comma-separated, are given, the
661 second is used first to do an initial check, making use of any IP value
662 restrictions that are set. If there is a match, the first domain is used,
663 without any IP value restrictions, to get the TXT record.
665 6. All authenticators now have a server_condition option.
667 7. There is a new command-line option called -Mset. It is useful only in
668 conjunction with -be (that is, when testing string expansions). It must be
669 followed by a message id; Exim loads the given message from its spool
670 before doing the expansions.
672 8. Another similar new command-line option is called -bem. It operates like
673 -be except that it must be followed by the name of a file that contains a
676 9. When an address is delayed because of a 4xx response to a RCPT command, it
677 is now the combination of sender and recipient that is delayed in
678 subsequent queue runs until its retry time is reached.
680 10. Unary negation and the bitwise logical operators and, or, xor, not, and
681 shift, have been added to the eval: and eval10: expansion items.
683 11. The variables $interface_address and $interface_port have been renamed
684 as $received_ip_address and $received_port, to make it clear that they
685 relate to message reception rather than delivery. (The old names remain
686 available for compatibility.)
688 12. The "message" modifier can now be used on "accept" and "discard" acl verbs
689 to vary the message that is sent when an SMTP command is accepted.
695 1. There is a new Boolean option called filter_prepend_home for the redirect
698 2. There is a new acl, set by acl_not_smtp_start, which is run right at the
699 start of receiving a non-SMTP message, before any of the message has been
702 3. When an SMTP error message is specified in a "message" modifier in an ACL,
703 or in a :fail: or :defer: message in a redirect router, Exim now checks the
704 start of the message for an SMTP error code.
706 4. There is a new parameter for LDAP lookups called "referrals", which takes
707 one of the settings "follow" (the default) or "nofollow".
709 5. Version 20070721.2 of exipick now included, offering these new options:
711 After all other sorting options have bee processed, reverse order
712 before displaying messages (-R is synonym).
714 Randomize order of matching messages before displaying.
716 Instead of displaying the matching messages, display the sum
718 --sort <variable>[,<variable>...]
719 Before displaying matching messages, sort the messages according to
720 each messages value for each variable.
722 Negate the value for every test (returns inverse output from the
723 same criteria without --not).
729 1. The ${readsocket expansion item now supports Internet domain sockets as well
730 as Unix domain sockets. If the first argument begins "inet:", it must be of
731 the form "inet:host:port". The port is mandatory; it may be a number or the
732 name of a TCP port in /etc/services. The host may be a name, or it may be an
733 IP address. An ip address may optionally be enclosed in square brackets.
734 This is best for IPv6 addresses. For example:
736 ${readsocket{inet:[::1]:1234}{<request data>}...
738 Only a single host name may be given, but if looking it up yield more than
739 one IP address, they are each tried in turn until a connection is made. Once
740 a connection has been made, the behaviour is as for ${readsocket with a Unix
743 2. If a redirect router sets up file or pipe deliveries for more than one
744 incoming address, and the relevant transport has batch_max set greater than
745 one, a batch delivery now occurs.
747 3. The appendfile transport has a new option called maildirfolder_create_regex.
748 Its value is a regular expression. For a maildir delivery, this is matched
749 against the maildir directory; if it matches, Exim ensures that a
750 maildirfolder file is created alongside the new, cur, and tmp directories.
756 The documentation is up-to-date for the 4.61 release. Major new features since
757 the 4.60 release are:
759 . An option called disable_ipv6, to disable the use of IPv6 completely.
761 . An increase in the number of ACL variables to 20 of each type.
763 . A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
764 $2, $3, (though those are still set) because the numeric variables get used
765 for other things in complicated expansions.
767 . The default for rfc1413_query_timeout has been changed from 30s to 5s.
769 . It is possible to use setclassresources() on some BSD OS to control the
770 resources used in pipe deliveries.
772 . A new ACL modifier called add_header, which can be used with any verb.
774 . More errors are detectable in retry rules.
776 There are a number of other additions too.
782 The documentation is up-to-date for the 4.60 release. Major new features since
783 the 4.50 release are:
785 . Support for SQLite.
787 . Support for IGNOREQUOTA in LMTP.
789 . Extensions to the "submission mode" features.
791 . Support for Client SMTP Authorization (CSA).
793 . Support for ratelimiting hosts and users.
795 . New expansion items to help with the BATV "prvs" scheme.
797 . A "match_ip" condition, that matches an IP address against a list.
799 There are many more minor changes.
git://git.exim.org / users / heiko / exim.git / blob