4 This file contains complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.72.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_localhost boolean false smtp 1.73
82 allow_mx_to_ip boolean false main 3.14
83 allow_symlink boolean false appendfile
84 allow_utf8_domains boolean false main 4.14
85 arc_sign string* unset smtp 4.91 with Experimental_ARC
86 auth_advertise_hosts host list "*" main 4.00
87 authenticated_sender string* unset smtp 4.14
88 authenticated_sender_force boolean false smtp 4.61
89 authenticate_hosts host list unset smtp 3.13
90 auto_thaw time 0s main
91 av_scanner string* + main 4.50 with content scan
92 batch_id string unset appendfile 4.00
95 batch_max integer 100 appendfile
98 bcc string* unset autoreply
99 bi_command string unset main
100 body_only boolean false transports 2.05
101 bounce_message_file string unset main 4.00
102 bounce_message_text string unset main 4.00
103 bounce_return_body boolean true main 4.23
104 bounce_return_message boolean true main 4.00
105 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
106 bounce_sender_authentication string unset main 4.00
107 callout_domain_negative_expire time 3h main 4.11
108 callout_domain_positive_expire time 7d main 4.11
109 callout_negative_expire time 2h main 4.11
110 callout_positive_expire time 24h main 4.11
111 callout_random_local_part string* + main 4.11
112 cannot_route_message string* unset routers 4.11
113 caseful_local_part boolean false routers 4.00
114 cc string* unset autoreply
115 check_ancestor boolean false redirect 4.00
116 check_group boolean false appendfile
118 check_local_user boolean false routers 4.00
119 check_log_inodes integer 0 main
120 check_log_space integer 0 main
121 check_owner boolean true appendfile 3.14
123 check_rfc2047_length boolean true main 4.60
124 check_secondary_mx boolean false dnslookup 4.00
125 check_spool_inodes integer 0 main
126 check_spool_space integer 0 main
127 check_string string "From " appendfile 3.03
129 check_srv string* unset dnslookup 4.31
130 client_authz string* unset gsasl 4.94
131 client_condition string* unset authenticators 4.68
132 client_ignore_invalid_base64 boolean false plaintext 4.61
133 client_name string* + cram_md5 3.10
134 client_password string* unset gsasl 4.94
135 client_secret string* unset cram_md5 3.10
136 client_send string* unset plaintext 3.10
137 unset external (auth) 4.93
138 client_username string* unset gsasl 4.94
139 command string* unset lmtp 3.20
141 unset queryprogram 4.00
142 command_group string unset queryprogram 4.00
143 command_timeout time 5m smtp
144 command_user string unset queryprogram 4.00
145 commandline_checks_require_admin boolean false main 4.90
146 condition string* unset routers 4.00
147 connect_timeout time 0s smtp 1.60
148 connection_max_messages integer 500 smtp 4.00 replaces batch_max
149 create_directory boolean true appendfile
150 create_file string "anywhere" appendfile
151 current_directory string unset transports 4.00
152 unset queryprogram 4.00
153 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
154 daemon_startup_retries int 9 main 4.52
155 daemon_startup_sleep time 30s main 4.52
156 dane_require_tls_ciphers string* unset smtp 4.91
157 data string unset redirect 4.00
158 data_timeout time 5m smtp
159 debug_print string* unset authenticators 4.00
161 unset transports 2.00
162 debug_store boolean false main 4.90
163 delay_after_cutoff boolean true smtp
164 delay_warning time list 24h main
165 delay_warning_condition string* + main 1.73
166 deliver_drop_privilege boolean false main 4.00
167 deliver_queue_load_max fixed-point unset main 1.70
168 delivery_date_add boolean false transports
169 delivery_date_remove boolean true main
170 dkim_canon string* unset smtp 4.70
171 dkim_domain string list* unset smtp 4.72
172 dkim_private_key string* unset smtp 4.70
173 dkim_selector string* unset smtp 4.70
174 dkim_sign_headers string* (RFC4871) smtp 4.70
175 dkim_strict string* unset smtp 4.70
176 dkim_timestamps integer* unset smtp 4.92
177 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
178 dkim_verify_keytypes string ed25519:rsa main 4.93
179 dkim_verify_minimal boolean false main 4.93
180 dkim_verify_signers string* $dkim_signers main 4.70
181 directory string* unset appendfile
182 directory_file string* + appendfile
183 directory_mode octal-integer 0700 appendfile
184 directory_transport string* unset redirect 4.00
185 disable_ipv6 boolean false main 4.61
186 disable_logging boolean false routers 4.11
187 false transports 4.11
188 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
189 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
190 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
191 dns_again_means_nonexist domain list unset main 1.89
192 dns_check_names_pattern string + main 2.11
193 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
194 dns_csa_search_limit integer 5 main 4.60
195 dns_csa_use_reverse boolean true main 4.60
196 dns_dnssec_ok integer -1 main 4.82
197 dns_dane_ok integer -1 main 4.83
198 dns_ipv4_lookup boolean false main 3.20
199 dns_qualify_single boolean true smtp
200 dns_retrans time 0s main 1.60
201 dns_retry integer 0 main 1.60
202 dns_search_parents boolean false smtp
203 dns_use_edns0 integer -1 main 4.76
204 domains domain list unset routers 4.00
205 driver string unset authenticators
208 drop_cr boolean false main 4.00 became a no-op in 4.21
209 dscp string unset smtp 4.82
210 dsn_from string* + main 4.67
211 envelope_to_add boolean false transports
212 envelope_to_remove boolean true main
213 environment string* unset pipe 2.95
214 errors_copy string list* unset main
215 errors_reply_to string unset main
216 errors_to string* unset routers 4.00
217 escape_string string ">From " appendfile 3.03
219 exim_group string ++ main
220 exim_path string ++ main
221 exim_user string ++ main
222 exim_version string ++ main 4.93
223 expn boolean true routers
224 extra_local_interfaces string unset main 4.21
225 extract_addresses_remove_arguments boolean true main 1.92
226 fail_verify boolean false routers
227 fail_verify_recipient boolean false routers 4.00
228 fail_verify_sender boolean false routers 4.00
229 fallback_hosts string list unset routers 4.00
231 file string* unset appendfile
234 file_expand boolean false autoreply
235 file_format string unset appendfile 3.03
236 file_must_exist boolean false appendfile
237 file_optional boolean false autoreply
238 file_transport string* unset redirect 4.00
239 filter_prepend_home boolean true redirect 4.63
240 final_timeout time 10m smtp
241 finduser_retries integer 0 main
242 forbid_blackhole boolean false redirect 4.00
243 forbid_exim_filter boolean false redirect 4.44
244 forbid_fail boolean false redirect 4.00
245 forbid_file boolean false redirect 4.00
246 forbid_filter_existstest boolean false redirect 4.00
247 forbid_filter_logwrite boolean false redirect 4.00
248 forbid_filter_lookup boolean false redirect 4.00
249 forbid_filter_perl boolean false redirect 4.00
250 forbid_filter_readfile boolean false redirect 4.00
251 forbid_filter_readsocket boolean false redirect 4.11
252 forbid_filter_reply boolean false redirect 4.00
253 forbid_filter_run boolean false redirect 4.00
254 forbid_include boolean false redirect 4.00
255 forbid_pipe boolean false redirect 4.00
256 forbid_sieve_filter boolean false redirect 4.44
257 forbid_smtp_code boolean false redirect 4.63
258 force_command boolean false pipe 4.82
259 freeze_exec_fail boolean false pipe 1.89
260 freeze_signal boolean false pipe 4.75
261 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
262 from string* unset autoreply
263 gecos_name string* unset main
264 gecos_pattern string unset main
265 gethostbyname boolean false smtp
266 gnutls_allow_auto_pkcs11 boolean false main 4.82
267 gnutls_compat_mode boolean unset main 4.70
268 gnutls_require_kx string* unset main 4.67 deprecated, warns
269 string* unset smtp 4.67 deprecated, warns
270 gnutls_require_mac string* unset main 4.67 deprecated, warns
271 string* unset smtp 4.67 deprecated, warns
272 gnutls_require_protocols string* unset main 4.67 deprecated, warns
273 string* unset smtp 4.67 deprecated, warns
274 group string + routers 4.00
275 unset transports 4.00 replaces local option in some transports
276 header_line_maxsize integer 0 (unset) main 4.14
277 header_maxsize integer 1M main 4.14
278 headers string* unset autoreply
279 headers_add string* unset routers 4.00
281 headers_charset string ++ main 4.21
282 headers_only boolean false transports 2.05
283 headers_remove string* unset routers 4.00
285 headers_rewrite string unset transports 3.20
286 helo_accept_junk_hosts host list unset main 3.00
287 helo_allow_chars string "" main 4.02
288 helo_lookup_domains domain list unset main 4.00
289 helo_data string* "$primary_hostname" smtp 3.21
290 helo_try_verify_hosts host list unset main 4.00
291 helo_verify_hosts host list unset main 1.73
292 hide_child_in_errmsg false redirect 4.00
293 hold_domains domain list unset main 1.70
294 home_directory string* unset transports 4.00 replaces individual options
295 host_all_ignored string "defer" manualroute 4.67
296 host_find_failed string "freeze" manualroute 4.00
297 host_lookup host list unset main 3.00
298 host_lookup_order string list "bydns:byaddr" main 4.30
299 host_reject_connection host list unset main 4.00
300 hosts string unset iplookup 4.00
301 string list* unset smtp
302 hosts_avoid_esmtp host list unset smtp 4.21
303 hosts_avoid_pipelining host list unset smtp 4.67
304 hosts_avoid_tls host list unset smtp 3.20
305 hosts_connection_nolog host list unset main 4.43
306 hosts_max_try integer 5 smtp 3.20
307 hosts_max_try_hardlimit integer 50 smtp 4.50
308 hosts_nopass_tls host list unset smtp 4.00
309 hosts_noproxy_tls host list "*" smtp 4.90
310 hosts_override boolean false smtp 2.11
311 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
312 hosts_randomize boolean false manualroute 4.00
314 hosts_require_auth host list unset smtp 4.00
315 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
316 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
317 hosts_require_tls host list unset smtp 3.20
318 hosts_treat_as_local domain list unset main 1.95
319 hosts_try_auth host list unset smtp 4.00
320 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
321 hosts_try_fastopen host list unset smtp 4.88
322 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
323 ibase_servers string unset main 4.23
324 ignore_bounce_errors_after time 0s main 4.00
325 ignore_eacces boolean false redirect 4.00
326 ignore_enotdir boolean false redirect 4.00
327 ignore_fromline_hosts host list unset main
328 ignore_fromline_local boolean false main 2.05
329 ignore_status boolean false pipe
330 ignore_target_hosts host list unset routers 4.00
331 include_directory string unset redirect 4.00
332 initgroups false routers 4.00
333 interface string list unset smtp 1.70
334 keep_malformed time 4d main
335 keepalive boolean true smtp 2.05
336 ldap_default_servers string list unset main 3.02
337 ldap_version int 2 or 3 main 4.14
338 local_from_check boolean true main 3.14
339 local_from_prefix string unset main 3.14
340 local_from_suffix string unset main 3.14
341 local_interfaces string list unset main 1.60
342 local_part_prefix string unset routers 4.00 replaces prefix
343 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
344 local_part_suffix string unset routers 4.00 replaces suffix
345 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
346 local_parts string list* unset routers 4.00
347 local_scan_timeout time 5m main 4.03
348 local_sender_retain boolean false main 4.00
349 localhost_number string unset main
350 lock_fcntl_timeout time 0s appendfile 3.14
351 lock_flock_timeout time 0s appendfile 4.11
352 lock_interval time 3s appendfile
353 lock_retries integer 10 appendfile
354 lockfile_mode octal-integer 0600 appendfile
355 lockfile_timeout time 30m appendfile
356 log string* unset autoreply
357 log_as_local boolean + routers 4.00
358 log_file_path string list ++ main
359 log_defer_output boolean false pipe 1.89
360 log_fail_output boolean false pipe 1.60
361 log_output boolean false pipe 1.60
362 log_selector string unset main 4.00
363 log_timezone boolean false main 4.11
364 lookup_open_max integer 25 main 2.05
365 mailbox_filecount string* unset appendfile 4.43
366 mailbox_size string* unset appendfile 4.43
367 maildir_format boolean false appendfile 1.70
368 maildir_retries integer 10 appendfile 1.70
369 maildir_tag string* unset appendfile 1.92
370 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
371 maildirfolder_create_regex string unset appendfile 4.62
372 mailstore_format boolean false appendfile 2.00
373 mailstore_prefix string* unset appendfile 2.00
374 mailstore_suffix string* unset appendfile 2.00
375 match_directory string* unset localuser
376 max_output integer 20K pipe
377 max_rcpt integer 100 smtp 1.60
378 max_user_name_length integer 0 main
379 mbx_format boolean false appendfile 2.10
380 message_body_newlines boolean false main 4.68
381 message_body_visible integer 500 main
382 message_id_header_domain string* unset main 4.11
383 message_id_header_text string* unset main
384 message_logs boolean true main 4.10
385 message_prefix string* + appendfile 4.00 replaces prefix
386 string* unset pipe 4.00 replaces prefix
387 message_size_limit integer 50M main
389 message_suffix string* + appendfile 4.00 replaces suffix
390 string* unset pipe 4.00 replaces suffix
391 mode octal-integer 0600 appendfile
393 mode_fail_narrower boolean true appendfile 1.70
394 modemask octal-integer 022 redirect 4.00
395 more boolean true routers 4.00
396 move_frozen_messages boolean false main 3.09
397 multi_domain boolean true smtp
398 mx_domains domain list unset dnslookup 4.00
399 mx_fail_domains domain list unset dnslookup 4.43
400 mysql_servers string list unset main 3.03
401 never_users string list unset main
402 notify_comsat boolean false appendfile
403 once string* unset autoreply
404 once_file_size integer 0 autoreply 3.20
405 once_repeat time 0s autoreply 2.95
406 one_time boolean false redirect 4.00
407 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
408 optional boolean false iplookup 4.00
409 oracle_servers string unset main 4.00
410 owners string list unset redirect 4.00
411 owngroups string list unset redirect 4.00
412 pass_on_timeout boolean false routers 4.00
413 pass_router string unset routers 4.00
414 path string "/usr/bin" pipe
415 percent_hack_domains domain list unset main
416 perl_at_start boolean false main 2.10
417 perl_startup string unset main 2.10
418 permit_coredump boolean false pipe 4.73
419 pgsql_servers string list unset main 3.14
420 pid_file_path string ++ main
421 pipe_as_creator boolean false pipe
422 pipe_transport string* unset redirect 4.00
423 pipelining_advertise_hosts host list "*" main 4.14
424 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
425 port integer 0 iplookup 4.00
427 preserve_message_logs boolean false main
428 prdr_enable boolean false main 4.82 if experimental_prdr
429 primary_hostname string + main
430 print_topbitchars boolean false main 1.89
431 process_log_path string unset main 4.21
432 prod_requires_admin boolean true main 1.70
433 protocol string "udp" iplookup 4.00
434 string "smtp" smtp 3.20
435 public_name string unset authenticators 3.10
436 qualify_domain string + main
437 string* unset redirect 4.31
438 qualify_preserve_domain boolean false redirect 4.00
439 qualify_recipient string + main
440 qualify_single boolean true dnslookup 4.00
441 query string* + iplookup 4.00
442 queue_domains domain list unset main 4.00
443 queue_list_requires_admin boolean true main 1.95
444 queue_only boolean false main
445 queue_only_file string unset main 2.05
446 queue_only_load fixed-point unset main
447 queue_only_load_latch boolean true main 4.68
448 queue_only_override boolean true main 4.21
449 queue_run_in_order boolean false main 1.70
450 queue_run_max integer 5 main
451 queue_smtp_domains domain list unset main
452 quota string* unset appendfile 1.60
453 quota_directory string* unset appendfile 4.11
454 quota_filecount integer 0 appendfile 2.05
455 quota_is_inclusive boolean true appendfile 3.20
456 quota_size_regex string unset appendfile 3.14
457 quota_warn_message string* + appendfile 2.10
458 quota_warn_threshold string* 0 appendfile 2.10
459 rcpt_include_affixes boolean false transports 4.21
460 receive_timeout time 0s main 4.00 replacing accept_timeout
461 received_header_text string* + main
462 received_headers_max integer 30 main
463 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
464 recipients_max integer 0 main 1.60
465 recipients_max_reject boolean false main 1.70
466 redirect_router string unset routers 4.00
467 remote_max_parallel integer 1 main
468 remote_sort_domains domain list unset main 4.00 replacing remote_sort
469 repeat_use boolean true redirect 4.00
470 reply_to string* unset autoreply 2.05
471 reply_transport string* unset redirect 4.00
472 require_files string list* unset routers 4.00
473 reroute string* unset iplookup 4.00
474 response_pattern string unset iplookup 4.00
475 restrict_to_path boolean false pipe
476 retry_data_expire time 7d main 3.03
477 retry_include_ip_address boolean true smtp 1.92
478 retry_interval_max time 24h main
479 retry_use_local_part boolean + routers 4.00
480 + transports 4.00 replacing individual options
481 return_fail_output boolean false pipe 1.60
482 return_message boolean false autoreply
483 return_output boolean false pipe
484 return_path string* unset transports 2.05
485 return_path_add boolean false transports
486 return_path_remove boolean true main
487 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
488 rewrite boolean true redirect 4.00
489 rewrite_headers boolean true dnslookup 4.00
490 rfc1413_hosts host list * main
491 rfc1413_query_timeout time 5s main
492 router_home_directory string* unset routers 4.11
493 route_data string* unset manualroute 4.00
494 route_list string list unset manualroute 4.00
495 same_domain_copy_routing boolean false dnslookup 4.00
496 search_parents boolean false dnslookup 4.00
497 self string "freeze" routers 4.00
498 sender_unqualified_hosts host list unset main
499 senders address list unset routers 4.00
500 serialize_hosts host list unset smtp 1.60
501 server_advertise_condition string* unset authenticators 4.14
502 server_channelbinding bool false gsasl 4.80
503 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
504 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
505 server_keytab string* unset heimdal_gssapi 4.80
506 server_mail_auth_condition string* unset authenticators 3.22
507 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
508 server_password string unset gsasl 4.80
509 server_param1 string* unset tls (auth) 4.86
510 server_param2 string* unset tls (auth) 4.86
511 server_param3 string* unset tls (auth) 4.86
512 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
513 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
514 server_prompts string* unset plaintext 3.10
515 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
516 server_scram_iter string* unset gsasl 4.80
517 server_scram_salt string* unset gsasl 4.80
518 server_secret string* unset cram_md5 3.10
519 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
520 server_set_id string* unset authenticators 3.10
521 set string* unset routers 4.93
522 shadow_condition string* unset transports
523 shadow_transport string unset transports
524 size_addition integer 1024 smtp 1.91
525 skip_syntax_errors boolean false redirect 4.00
526 smtp_accept_keepalive boolean true main
527 smtp_accept_max integer 20 main
528 smtp_accept_max_nonmail integer 10 main 4.11
529 smtp_accept_max_nonmail_hosts host list * main 4.14
530 smtp_accept_max_per_connection integer 1000 main 4.00
531 smtp_accept_max_per_host integer 0 main 2.05
532 smtp_accept_queue integer 0 main
533 smtp_accept_queue_per_connection integer 10 main 2.03
534 smtp_accept_reserve integer 0 main
535 smtp_active_hostname string* unset main 4.33
536 smtp_banner string* + main
537 smtp_check_spool_space boolean true main 2.10
538 smtp_connect_backlog integer 5 main
539 smtp_enforce_sync boolean true main 4.00
540 smtp_etrn_command string* unset main 1.92
541 smtp_etrn_serialize boolean true main 1.89
542 smtp_load_reserve fixed-point unset main
543 smtp_max_synprot_errors integer 3 main 4.30
544 smtp_max_unknown_commands integer 3 main 4.14
545 smtp_ratelimit_hosts host list unset main 4.00
546 smtp_ratelimit_mail string unset main 4.00
547 smtp_ratelimit_rcpt string unset main 4.00
548 smtp_receive_timeout time 5m main
549 smtp_reserve_hosts host list unset main
550 smtp_return_error_details boolean false main 4.11
551 socket string* unset lmtp 4.11
552 spamd_address string* + main 4.50 with content scan
553 split_spool_directory boolean false main 1.70
554 spool_directory string ++ main
555 spool_wireformat boolean false main 4.90
556 sqlite_lock_timeout time 5s main 4.53
557 strict_acl_vars boolean false main 4.64
558 srv_fail_domains domain list unset dnslookup 4.43
559 strip_excess_angle_brackets boolean false main
560 strip_trailing_dot boolean false main
561 subject string* unset autoreply
562 syntax_errors_text string* unset redirect 4.00
563 syntax_errors_to string unset redirect 4.00
564 syslog_duplication boolean true main 4.21
565 syslog_facility string unset main 4.20
566 syslog_processname string "exim" main 4.20
567 syslog_timestamp boolean true main 4.00
568 system_filter string unset main 4.00 replacing message_filter
569 system_filter_directory_transport string unset main 4.00 replacing message_filter
570 system_filter_file_transport string unset main 4.00 replacing message_filter
571 system_filter_group string unset main 4.00 replacing message_filter
572 system_filter_pipe_transport string unset main 4.00 replacing message_filter
573 system_filter_reply_transport string unset main 4.00 replacing message_filter
574 system_filter_user string unset main 4.00 replacing message_filter
575 tcp_nodelay boolean true main 4.23
577 tcp_wrappers_daemon_name string* ++ main 4.73
578 temp_errors string list + pipe 1.95
579 text string* unset autoreply
580 timeout time 5m lmtp 3.20
584 timeout_defer boolean false pipe 4.51
585 timeout_frozen_after time 0s main 3.20
586 timezone string + main 3.15
587 tls_advertise_hosts host list * main 3.20
588 tls_advertise_requiretls host list * main 4.92 if experimental_requiretls
589 tls_certificate string* unset main 3.20
591 tls_dh_max_bits integer 2236 main 4.80
592 tls_dh_min_bits integer 1024 smtp 4.82
593 tls_dhparam string* unset main 3.20
594 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
595 tls_on_connect_ports string unset main 4.43
596 tls_privatekey string* unset main 3.20
598 tls_remember_emstp boolean false main 4.21
599 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
600 string* unset main 4.33
601 tls_sni string* unset main 4.80
602 tls_tempfail_tryclear boolean true smtp 4.05
603 tls_try_verify_hosts host list unset main 4.00
604 tls_verify_certificates string* unset main 3.20
606 tls_verify_hosts host list unset main 3.20
607 to string* unset autoreply
608 translate_ip_address string unset routers 4.00
609 transport string* unset routers 4.00
610 transport_current_directory string unset routers 4.00
611 transport_home_directory string unset routers 4.00
612 transport_filter string unset transports
613 transport_filter_timeout time 5m transports 4.30
614 trusted_groups string list unset main
615 trusted_users string list unset main
616 umask octal-integer 022 pipe
617 unknown_login string unset main
618 unknown_username string unset main
619 unseen boolean false routers 4.00
620 untrusted_set_sender boolean false main 3.20
621 use_bsmtp boolean false appendfile 4.00
623 use_crlf boolean false appendfile 1.89
625 use_fcntl_lock boolean + appendfile 1.70
626 use_flock_lock boolean + appendfile 4.11
627 use_lockfile boolean + appendfile
628 use_mbx_lock boolean + appendfile 2.10
629 use_shell boolean false pipe 1.70
630 user string + routers 4.00
631 unset transports 4.00 replaces individual options
632 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
633 uucp_from_pattern string + main 1.75
634 uucp_from_sender string* "$1" main 1.75
635 verify boolean true routers 4.00
636 verify_only boolean false routers 4.00
637 verify_recipient boolean true routers 4.00
638 verify_sender boolean true routers 4.00
639 warn_message_file string unset main 4.00
640 widen_domains string list unset dnslookup 4.00
641 write_rejectlog boolean true main 4.31
645 2. COMMAND LINE OPTIONS
646 -----------------------
648 The table below contains a complete list of all Exim's command line options.
649 Those marked with # are available only to trusted users, those marked with +
650 are available only to admin users, and those marked with * exist only to
651 provide compatibility with Sendmail.
654 --help Give a little help (not a lot)
655 --version Give version information (alias for -bV)
658 -bdf + Start daemon and run it in the foreground
659 -be Test string expansion
660 -bem Test string expansion, read test message first
661 -bF Test system filter file
662 -bf Test user filter file
663 -bfd Set domain for filter testing
664 -bfl Set local part for filter testing
665 -bfp Set local part prefix for filter testing
666 -bfs Set local part suffix for filter testing
667 -bh Test incoming SMTP call, omitting callouts
668 -bhc Test incoming SMTP call, with callouts
669 -bi * Run <command>bi_command</command>
670 -bI:help Show list of accepted -bI:<tag> options
671 -bm Accept message on standard input
672 -bmalware + Invoke configured malware scanning against supplied filename
673 -bnq Don't qualify addresses in locally submitted messages
674 -bP Show configuration option settings
676 -bpa + ... with generated addresses as well
677 -bpc + ... but just show a count of messages
678 -bpr + ... do not sort
679 -bpra + ... with generated addresses, unsorted
680 -bpru + ... only undelivered addresses, unsorted
681 -bpu + ... only undelivered addresses
682 -brt Test retry rules
683 -brw Test rewriting rules
684 -bS Read batch SMTP on standard input
685 -bs Run SMTP on standard input and output
686 -bt Test address directing and routing
687 -bV Verify version number
688 -bv Test recipient address verification
689 -bvs Test sender address verification
690 -bw + Inetd wait mode
691 -C + Use alternate configuration file
692 -D + Define macro for configuration file
693 -d + Turn on debugging output
694 -dd + Ditto, but if a daemon, not for subprocesses
695 -dropcr Remove CR character in input: became a no-op in 4.21
697 -ex * Synonym for -oex (for several different x)
698 -F Set calling user name
699 -f # Set calling user address
702 -i Dot does not terminate message
703 -M + Force deliver specific message
704 -Mar + Add recipient to message
705 -MC Internal use only
706 -MCA Internal use only
707 -MCP Internal use only
708 -MCQ Internal use only
709 -MCS Internal use only
710 -MCT Internal use only
711 -Mc + Deliver specific message
712 -Mes + Edit message sender
713 -Mf + Freeze message(s)
714 -Mg + Give up (bounce) message(s)
715 -Mmad + Mark all recipients delivered
716 -Mmd + Mark one recipient delivered
717 -Mrm + Remove message(s) (no bounce)
718 -Mset + Load message's variables when testing with -be
719 -Mt + Thaw message(s)
720 -Mvb + View message body
721 -Mvc + View entire message in RFC 2822 format
722 -Mvh + View message header
723 -Mvl + View message log
725 -N + Deliver without transporting
728 -oA * Supply argument for <option>-bi</option>
729 -oB Set max messages down one connection
730 -odb Background delivery
731 -odf Foreground delivery
732 -odi Foreground delivery
733 -odq Queue message; do not deliver
734 -odqs ... do not do SMTP deliveries
735 -oee Error sent by mail; zero return code
736 -oem Error sent by mail; non-zero return code
737 -oep Error written to standard error stream
738 -oeq * Error written to standard error stream
739 -oew * Error sent by mail; non-zero return code
740 -oi Dot does not terminate message
741 -oitrue * Dot does not terminate message
742 -oMa # Supply host address
743 -oMaa # Supply authenticator name
744 -oMai # Supply authenticated id
745 -oMas # Supply authenticated sender
746 -oMi # Supply interface address
747 -oMm # Supply message reference
748 -oMr # Supply protocol name
749 -oMs # Supply host name
750 -oMt # Supply ident string
753 -oP * Specify path for daemon's pid file
754 -or Timeout non-SMTP messages
755 -os Timeout for SMTP messages
756 -ov * Verbose; same as -v
757 -oX Alternative port for daemon
758 -pd Delay Perl interpreter start
759 -ps Do not delay Perl interpreter start
760 -p<r>:<s> * Same as -oMr <r> -oMs <s>
762 -qf + ... force delivery ) Other combinations are
763 -qff + ... and include frozen messages ) possible. The syntax is
764 -qi + ... initial deliveries only )
765 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
766 -qq + Two-stage queue run )
769 -R Select by recipient in queue run
771 -Rff ... and frozen messages
772 -Rr ... using regular expression
773 -Rrf ... with forcing
774 -Rrff ... and frozen messages
776 -S Select by sender in queue run
778 -Sff ... and frozen messages
779 -Sr ... using regular expression
780 -Srf ... with forcing
781 -Srff ... and frozen messages
782 -Tqt * Used by Exim test suite; not recognized in normal use
783 -t Take recipients from header lines
785 -tls-on-connect Do TLS on startup (for legacy clients)
787 -v Verbose - shows SMTP dialogue and other delivery info
788 -x Ignored (AIX compatibility)
791 3. BUILD TIME OPTIONS FOR EXIM
792 ------------------------------
794 The table below contains a "mostly" complete list of options that can be
795 set in Local/Makefile when building Exim. The only items not included are
796 those whose names can be trivially derived from rules stated below.
798 More information about individual options can be found in src/EDITME and
801 The second column below gives the type of option:
803 . `system' means the option is concerned with the operating system;
805 . `driver' means the option selects a driver to be included in the binary;
807 . `lookup' means the option selects a lookuptype to be included in the binary;
809 . `mandatory' means the option is required to be supplied;
811 . `recommended' means the option is recommended to be supplied;
813 . `optional' means what it says;
815 Those marked with * are specialized and are unlikely to be required in most
816 installations. Those that are marked with ** are commonly set in OS-specific
817 Makefiles. If you use any of these in your Local/Makefile, you may need to
818 reproduce some of the OS-specific settings. For example, in the Makefile for
819 Solaris (which is actually called OS/Makefile-SunOS5), there is
821 LIBS=-lsocket -lnsl -lkstat
823 If you use LIBS to add extra libraries, you must also include the OS ones in
824 your setting. It is better, in this particular case, to use EXTRALIBS, which is
825 empty by default, and is provided for just this reason. Of course, if you do
826 actually want to modify a setting from the OS-specific file, there is nothing
827 to stop you overriding it in your Local/Makefile.
829 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
830 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
831 libraries specific only to that module. These rules are only used where the
832 relevant lookup is a module. These options are not explicitly listed below.
834 Variables with names endined `_PC' are used for pkg-config integration; setting
835 the value to the name of a pkg-config package will cause Exim's build system to
836 query the --cflags and --libs for the given name, when building anything
837 dependent upon the component associated with the `_PC' variable. For lookups,
838 if the lookup is dynamically loaded, then this *replaces* the use of the
839 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
840 is statically loaded into Exim, the results will be inserted into the
841 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
842 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
843 only listed below for the TLS implementation cases.
846 Option Type Description
847 ------------------------------------------------------------------------------
849 ALT_CONFIG_PREFIX optional restricts location of -C files
850 APPENDFILE_MODE optional*
851 APPENDFILE_DIRECTORY_MODE optional*
852 APPENDFILE_LOCKFILE_MODE optional*
853 AR system command to build a library
854 AUTH_CRAM_MD5 driver include cram_md5 authenticator
855 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
856 AUTH_GSASL driver include GNU SASL authenticator
857 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
858 AUTH_LIBS system library linkage for authenticators
859 AUTH_PLAINTEXT driver include plaintext authenticator
860 AUTH_SPA driver include SPA (NTLM) authenticator
861 AUTH_VARS=3 optional* number of $auth variables
862 BASENAME_COMMAND system** path to basename
863 BASE_62=62 optional* not normally changed for Unix
864 BIN_DIRECTORY mandatory Exim binary directory
865 CC system** C compiler
866 CFLAGS system** flags for C compiler
867 CFLAGS_DYNAMIC system** extra flags needed for .so modules
868 CHGRP_COMMAND system** path to chgrp
869 CHOWN_COMMAND system** path to chown
870 COMPRESS_COMMAND system path to a compress command
871 COMPRESS_SUFFIX system suffix added to compressed files
872 CONFIGURE_FILE mandatory Exim runtime configuration file
873 CONFIGURE_FILE_USE_EUID optional*
874 CONFIGURE_FILE_USE_NODE optional*
875 CONFIGURE_GROUP optional* alternate group for configuration file
876 CONFIGURE_OWNER optional* alternate owner for configuration file
877 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
878 DBMLIB optional** location of DBM library
879 DB_DIRECTORY_MODE optional* mode for hints directory
880 DB_LOCKFILE_MODE optional* mode for hints lock files
881 DB_LOCK_TIMEOUT optional* timeout for hints lock files
882 DB_MODE optional* mode for hints files
883 DEFAULT_CRYPT optional default crypt() function
884 DELIVER_IN_BUFFER_SIZE optional*
885 DELIVER_OUT_BUFFER_SIZE optional*
886 DISABLE_DKIM optional disables DKIM support
887 DISABLE_DNSSEC optional disables attempts to use DNSSEC
888 DISABLE_D_OPTION optional disables -D option
889 ERRNO_QUOTA optional* error code for system quota failures
890 EXICYCLOG_MAX optional number of old log files to keep
891 EXIMDB_DIRECTORY_MODE optional* for hints database directory
892 EXIMDB_LOCKFILE_MODE optional* for hints lock files
893 EXIMDB_MODE optional* mode for hints files
894 EXIMON_TEXTPOP system**
896 EXIM_GROUP mandatory group to use for Exim
897 EXIM_MONITOR optional set to eximon.bin to compile
899 EXIM_USER mandatory user to use for Exim
900 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
901 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
902 EXIWHAT_MULTIKILL_CMD system**
903 EXIWHAT_MULTIKILL_ARG system**
904 EXIWHAT_PS_ARG system** to list all processes
905 EXIWHAT_PS_CMD system** path to ps command
906 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
907 EXTRALIBS system additional libraries
908 EXTRALIBS_EXIM system additional libraries for Exim only
909 EXTRALIBS_EXIMON system additional libraries for the monitor
910 FIXED_NEVER_USERS optional can't override at runtime
911 HAVE_ICONV system the iconv() function is available
912 HAVE_IPV6 system include IPv6 support
913 HEADERS_CHARSET optional charset for decoded header lines
914 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
915 HEADER_MAXSIZE optional* max memory for message header
916 HOSTNAME_COMMAND system** path to hostname command
917 INCLUDE system path to include files
918 INFO_DIRECTORY optional directory for Info documentation
919 INPUT_DIRECTORY_MODE optional mode for input directory
920 IPV6_INCLUDE system additional includes for IPv6
921 IPV6_LIBS system additional libraries for IPv6
922 LDAP_LIB_TYPE optional type of LDAP library
923 LFLAGS system** link editor flags
924 LIBIDENTCFLAGS system C flags when compiling libident
925 LIBIDENTNAME system name for libident library
926 LIBRESOLV system** library for DNS resolver
927 LIBS system** additional libraries
928 LIBS_EXIM system** additional libraries for Exim ony
929 LIBS_EXIMON system** additional libraries for monitor
930 LOCAL_SCAN_SOURCE optional location of local_scan() source
931 LOG_DIRECTORY_MODE optional mode for log directory
932 LOG_FILE_PATH optional path to log files
933 LOG_MODE optional mode for log files
934 LOOKUP_CDB lookup include cdb lookup
935 LOOKUP_DBM lookup include dbm lookup
936 LOOKUP_DNSDB lookup include dnsdb lookup
937 LOOKUP_DSEARCH lookup include dsearch lookup
938 LOOKUP_INCLUDE lookup include files for lookups
939 LOOKUP_LDAP lookup include ldap lookup
940 LOOKUP_LIBS lookup include libraries for lookups
941 LOOKUP_LSEARCH lookup include all lsearch lookups
942 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
943 LOOKUP_MYSQL lookup include mysql lookup
944 LOOKUP_NIS lookup include nis lookup
945 LOOKUP_NISPLUS lookup include nisplus lookup
946 LOOKUP_ORACLE lookup include oracle lookup
947 LOOKUP_PGSQL lookup include pgsql lookup
948 LOOKUP_TESTDB lookup*
949 LOOKUP_WHOSON lookup include whoson lookup
950 LOOKUP_*_INCLUDE optional* include files for dynamic module
951 LOOKUP_*_LIBS optional* libraries for dynamic module
952 MAKE_SHELL optional* shell to use for make
953 MAX_FILTER_SIZE optional* max file size for filter files
954 MAX_INCLUDE_SIZE optional* max file size for :include: files
955 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
956 MAX_NAMED_LIST optional* max named lists of a given type
957 MAX_INTERFACES system maximum network interfaces
958 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
959 MV_COMMAND system path to mv command
960 NO_SYMLINK optional install doesn't make 'exim" symlink
961 PCRE_CONFIG system* use pcre-config for PCRE support
962 PCRE_LIBS system* library for using PCRE
963 PERL_CC system* compiler for Perl interface code
964 PERL_CCOPTS system* flags for same
965 PERL_COMMAND system path to Perl
966 PERL_LIBS system* library for compiling Perl interface
967 PID_FILE_PATH optional path to daemon's pid file
968 RADIUS_CONFIG_FILE optional path to Radius config file
969 RADIUS_LIB_TYPE optional type of RADIUS library
970 RANLIB system** path to ranlib command
971 RM_COMMAND system path to rm command
972 ROUTER_ACCEPT driver include accept router
973 ROUTER_DNSLOOKUP driver include dnslookup router
974 ROUTER_MANUALROUTE driver include manualroute router
975 ROUTER_IPLITERAL driver include ipliteral router
976 ROUTER_IPLOOKUP driver include iplookup router
977 ROUTER_REDIRECT driver include redirect router
978 ROUTER_QUERYPROGRAM driver include queryprogram router
979 SPOOL_DIRECTORY recommended path to spool directory
980 SPOOL_DIRECTORY_MODE optional mode of spool directory
981 SPOOL_MODE optional mode of spool files
982 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
983 STRIP_COMMAND optional* can be used to strp binaries
984 SUPPORT_A6 optional* support A6 DNS records
985 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
986 SUPPORT_MAILDIR optional support for maildir delivery
987 SUPPORT_MAILSTORE optional support for mailstore delivery
988 SUPPORT_MBX optional support for MBX delivery
989 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
990 SUPPORT_PAM optional support for PAM authentication
991 SUPPORT_TLS optional support for TLS encryption over SMTP
992 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
993 SYSLOG_LOG_PID optional add pid to syslog lines
994 SYSLOG_LONG_LINES optional do not split long syslog lines
995 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
996 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
997 TIMEZONE_DEFAULT optional default for timezone option
998 TLS_INCLUDE optional path to include files for TLS
999 TLS_LIBS optional additional libraries for TLS
1000 EXIM_TMPDIR system value for TMPDIR environment variable
1001 TRANSPORT_APPENDFILE driver include appendfile transport
1002 TRANSPORT_AUTOREPLY driver include autoreply transport
1003 TRANSPORT_LMTP driver include lmtp transport
1004 TRANSPORT_PIPE driver include pipe transport
1005 TRANSPORT_SMTP driver include smtp transport
1006 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1007 USE_DB system** use native DB interface
1008 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1009 USE_GNUTLS_PC optional probably "gnutls"
1010 USE_OPENSSL_PC optional probably "openssl"
1011 USE_READLINE optional try to load libreadline for -be
1012 USE_TCP_WRAPPERS system link with tcpwrappers
1013 USE_TDB optional use the tdb DB interface
1014 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1015 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1016 X11 system** X11 base directory
1017 X11_LD_LIB system** X11 link library
1018 XINCLUDE system** X11 include directory
1019 XLFLAGS system** X11 link time flags
1020 ZCAT_COMMAND system path to zcat command
1023 4. BUILD TIME OPTIONS FOR EXIMON
1024 --------------------------------
1026 The table below contains a complete list of options that can be set in
1027 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1028 ** it means that the text string is too long to fit in the table and is instead
1029 given below. A blank default means that there is no default value.
1031 ACTION_OUTPUT=no show output for every action
1032 ACTION_QUEUE_UPDATE=yes update queue display after actions
1033 BODY_MAX=20000 maximum body display
1034 DOMAIN= domain to strip from window title
1035 LOG_BUFFER=20K buffer for log tail
1036 LOG_DEPTH=300 depth of log subwindow
1037 LOG_FONT=** font for log display
1038 LOG_STRIPCHARTS=** patterns for stripcharts
1039 LOG_WIDTH=950 width of log subwindow
1040 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1041 MIN_HEIGHT=162 minimum window height
1042 MIN_WIDTH=103 minimum window width
1043 QUALIFY_DOMAIN= local domain to strip from addresses
1044 QUEUE_DEPTH=200 depth of queue subwindow
1045 QUEUE_FONT=$LOG_FONT font for queue display
1046 QUEUE_INTERVAL=300 queue refresh interval
1047 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1048 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1049 QUEUE_WIDTH=950 width of queue subwindow
1050 SIZE_STRIPCHART= request partition size stripchart
1051 SIZE_STRIPCHART_NAME=space name for size stripchart
1052 START_SMALL=no if yes, start with small window
1053 STRIPCHART_INTERVAL=60 stripchart refresh interval
1054 TEXT_DEPTH=200 depth of text windows
1055 WINDOW_TITLE="${hostname} eximon" window title
1057 The default for LOG_FONT is
1059 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1061 and the default for LOG_STRIPCHARTS is
1063 LOG_STRIPCHARTS='/ <= /in/
1065 / => .+ R=local/local/
1066 / => .+ T=[^ ]*smtp/smtp/'
1068 That is, there are four stripcharts, named in, out, local, and smtp. The first
1069 counts message arrivals, the second counts all deliveries, the third counts
1070 deliveries where the router's name starts with "local", and the fourth counts
1071 deliveries where the transport name contains "smtp".
1073 **** End of OptionLists ****
git://git.exim.org / users / heiko / exim.git / blob