1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.120 2005/04/07 10:02:02 ph10 Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
10 TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
11 doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
13 TK/02 Fix ACL "control" statement not being available in MIME ACL.
15 TK/03 Fix ACL "regex" condition not being available in MIME ACL.
17 PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
18 to test Sieve filters that use "vacation".
20 PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
21 that changes the way the GnuTLS parameters are stored in the cache file.
22 The new format can be generated externally. For backward compatibility,
23 if the data in the cache doesn't make sense, Exim assumes it has read an
24 old-format file, and it generates new data and writes a new file. This
25 means that you can't go back to an older release without removing the
28 PH/03 A redirect router that has both "unseen" and "one_time" set does not
29 work if there are any delivery delays because "one_time" forces the
30 parent to be marked "delivered", so its unseen clone is never tried
31 again. For this reason, Exim now forbids the simultaneous setting of
34 PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
35 redirected to themselves ("homonym" addresses). Read the long ChangeLog
36 entry if you want to know the details. The fix, however, neglected to
37 consider the case when local delivery batching is involved. The test for
38 "previously delivered" was not happening when checking to see if an
39 address could be batched with a previous (undelivered) one; under
40 certain circumstances this could lead to multiple deliveries to the same
43 PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
44 in its include files, and this causes problems building Exim.
46 PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
47 header_syntax) but Exim was just ignoring anything given after a slash.
48 In particular, this caused confusion with an attempt to use "verify =
49 reverse_host_lookup/defer_ok". An error is now given when options are
50 supplied for verify items that do not have them. (Maybe reverse_host_
51 lookup should have a defer_ok option, but that's a different point.)
53 PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
54 defined by RFC 821) to 2048, because there were problems with some AUTH
55 commands, and RFC 1869 says the size should be increased for extended
56 SMTP commands that take arguments.
58 PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
61 PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
62 "unknown" error; now it says that the functionality isn't in the binary.
64 PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
65 an address' error message when a string expansion fails (syntax or
66 whatever). Otherwise not only does the password appear in the log, it may
67 also be put in a bounce message.
69 PH/11 Installed exipick version 20050225.0 from John Jetmore.
71 PH/12 If the last host in a fallback_hosts list was multihomed, only the first
72 of its addresses was ever tried. (Bugzilla bug #2.)
74 PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
75 the result incorrectly in the debug output. (It correctly added a newline
76 to what was transported.)
78 TF/01 Added $received_time.
80 PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
81 commented out examples of how to interface to a virus scanner and to
82 SpamAssassin. Also added commented examples of av_scanner and
83 spamd_address settings.
85 PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
86 and controls are allowed in which ACLs. There were a couple of minor
87 errors. Some of the entries in the conditions table (which is a table of
88 where they are NOT allowed) were getting very unwieldy; rewrote them as a
89 negation of where the condition IS allowed.
91 PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
93 PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
94 header file does not have a version number, so I've had to invent a new
95 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
96 API. The code is untested by me (my Linux distribution still has 0.3.2 of
97 radiusclient), but it was contributed by a Radius user.
99 PH/18 Installed Lars Mainka's patch for the support of CRL collections in
100 files or directories, for OpenSSL.
102 PH/19 When an Exim process that is running as root has to create an Exim log
103 file, it does so in a subprocess that runs as exim:exim so as to get the
104 ownership right at creation (otherwise, other Exim processes might see
105 the file with the wrong ownership). There was no test for failure of this
106 fork() call, which would lead to the process getting stuck as it waited
107 for a non-existent subprocess. Forks do occasionally fail when resources
108 run out. I reviewed all the other calls to fork(); they all seem to check
111 PH/20 When checking for unexpected SMTP input at connect time (before writing
112 the banner), Exim was not dealing correctly with a non-positive return
113 from the read() function. If the client had disconnected by this time,
114 the result was a log entry for a synchronization error with an empty
115 string after "input=" when read() returned zero. If read() returned -1
116 (an event I could not check), uninitialized data bytes were printed.
117 There were reports of junk text (parts of files, etc) appearing after
120 PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
122 PH/22 Added support for macro redefinition, and (re)definition in between
123 driver and ACL definitions.
125 PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
126 forgetting to use the resulting value; it was using the unexpanded value.
128 PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
129 hadn't been configured. The fix is from Juergen Kreileder, who
130 understands it better than I do:
132 "Here's what I see happening with three configured cyrus_sasl
133 authenticators configured (plain, login, cram-md5):
135 On startup auth_cyrus_sasl_init() gets called for each of these.
136 This means three calls to sasl_listmech() without a specified mech_list.
137 => SASL tests which mechs of all available mechs actually work
138 => three warnings about OTP not working
139 => the returned list contains: plain, login, cram-md5, digest-md5, ...
141 With the patch, sasl_listmech() also gets called three times. But now
142 SASL's mech_list option is set to the server_mech specified in the the
143 authenticator. Or in other words, the answer from sasl_listmech()
144 gets limited to just the mech you're testing for (which is different
146 => the return list contains just 'plain' or 'login', 'cram-md5' or
147 nothing depending on the value of ob->server_mech.
149 I've just tested the patch: Authentication still works fine,
150 unavailable mechs specified in the exim configuration are still
151 caught, and the auth.log warnings about OTP are gone."
153 PH/25 When debugging is enabled, the contents of the command line are added
154 to the debugging output, even when log_selector=+arguments is not
157 PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
158 answer is "GNU", and only if the return is "GNU/something" is the answer
161 PH/27 $acl_verify_message is now set immediately after the failure of a
162 verification in an ACL, and so is available in subsequent modifiers. In
163 particular, the message can be preserved by coding like this:
165 warn !verify = sender
166 set acl_m0 = $acl_verify_message
168 Previously, $acl_verify_message was set only while expanding "message"
169 and "log_message" when a very denied access.
171 PH/28 Modified OS/os.c-Linux with
173 -#ifndef OS_LOAD_AVERAGE
174 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
176 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
177 nomenclature these days.)
179 PH/29 Installed patch from the Sieve maintainer that adds the options
180 sieve_useraddress and sieve_subaddress to the redirect router.
182 PH/30 In these circumstances:
183 . Two addresses routed to the same list of hosts;
184 . First host does not offer TLS;
185 . First host accepts first address;
186 . First host gives temporary error to second address;
187 . Second host offers TLS and a TLS session is established;
188 . Second host accepts second address.
189 Exim incorrectly logged both deliveries with the TLS parameters (cipher
190 and peerdn, if requested) that were in fact used only for the second
193 PH/31 When doing a callout as part of verifying an address, Exim was not paying
194 attention to any local part prefix or suffix that was matched by the
195 router that accepted the address. It now behaves in the same way as it
196 does for delivery: the affixes are removed from the local part unless
197 rcpt_include_affixes is set on the transport.
199 PH/32 Add the sender address, as F=<...>, to the log line when logging a
200 timeout during the DATA phase of an incoming message.
202 PH/33 Sieve envelope tests were broken for match types other than :is. I have
203 applied a patch sanctioned by the Sieve maintainer.
206 A note about Exim versions 4.44 and 4.50
207 ----------------------------------------
209 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
210 changes of various kinds. As a consequence, a big documentation update was
211 needed. This delayed the release for rather longer than seemed good, especially
212 in the light of a couple of (minor) security issues. Therefore, the changes
213 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
214 release. So 4.44 and 4.50 are in effect two different branches that both start
217 I have left the 4.50 change log unchanged; it contains all the changes since
218 4.43. The change log for 4.44 is below; many of its items are identical to
219 those for 4.50. This seems to be the most sensible way to preserve the
220 historical information.
226 1. Minor wording change to the doc/README.SIEVE file.
228 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
229 computation of the current number of files was incorrect.
231 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
232 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
235 4. Give more explanation in the error message when the command for a transport
236 filter fails to execute.
238 5. There are several places where Exim runs a non-Exim command in a
239 subprocess. The SIGUSR1 signal should be disabled for these processes. This
240 was being done only for the command run by the queryprogram router. It is
241 now done for all such subprocesses. The other cases are: ${run, transport
242 filters, and the commands run by the lmtp and pipe transports.
244 6. Added CONFIGURE_GROUP build-time option.
246 7. Some older OS have a limit of 256 on the maximum number of file
247 descriptors. Exim was using setrlimit() to set 1000 as a large value
248 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
249 systems. I've change it so that if it can't get 1000, it tries for 256.
251 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
252 was an oversight, and furthermore, ever since the addition of extra
253 controls (e.g. 4.43/32), the checks on when to allow different forms of
254 "control" were broken. There should now be diagnostics for all cases when a
255 control that does not make sense is encountered.
257 9. Added the /retain_sender option to "control=submission".
259 10. $recipients is now available in the predata ACL (oversight).
261 11. Tidy the search cache before the fork to do a delivery from a message
262 received from the command line. Otherwise the child will trigger a lookup
263 failure and thereby defer the delivery if it tries to use (for example) a
264 cached ldap connection that the parent has called unbind on.
266 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
267 of $address_data from the recipient verification was clobbered by the
270 13. The value of address_data from a sender verification is now available in
271 $sender_address_data in subsequent conditions in the ACL statement.
273 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
275 15. Added a new option "connect=<time>" to callout options, to set a different
278 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
279 was its contents. (It was OK if the option was not defined at all.)
281 17. A "Completed" log line is now written for messages that are removed from
282 the spool by the -Mrm option.
284 18. New variables $sender_verify_failure and $recipient_verify_failure contain
285 information about exactly what failed.
287 19. Added -dd to debug only the daemon process.
289 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
290 handles timeouts, both on the server side and network timeouts. Renamed the
291 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
293 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
294 It is now set to "smtps".
296 22. $host_address is now set to the target address during the checking of
299 23. When checking ignore_target_hosts for an ipliteral router, no host name was
300 being passed; this would have caused $sender_host_name to have been used if
301 matching the list had actually called for a host name (not very likely,
302 since this list is usually IP addresses). A host name is now passed as
305 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
306 code that specifies a non-restarting handler (typically sigaction() in
307 modern systems) in an attempt to fix a rare and obscure crash bug.
309 25. Narrowed the window for a race in the daemon that could cause it to ignore
310 SIGCHLD signals. This is not a major problem, because they are used only to
311 wake it up if nothing else does.
313 26. A malformed maildirsize file could cause Exim to calculate negative values
314 for the mailbox size or file count. Odd effects could occur as a result.
315 The maildirsize information is now recalculated if the size or filecount
318 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
319 support for a long time. Removed HAVE_SYS_VFS_H.
321 28. Installed the latest version of exipick from John Jetmore.
323 29. In an address list, if the pattern was not a regular expression, an empty
324 subject address (from a bounce message) matched only if the pattern was an
325 empty string. Non-empty patterns were not even tested. This was the wrong
326 because it is perfectly reasonable to use an empty address as part of a
327 database query. An empty address is now tested by patterns that are
328 lookups. However, all the other forms of pattern expect the subject to
329 contain a local part and a domain, and therefore, for them, an empty
330 address still always fails if the pattern is not itself empty.
332 30. Exim went into a mad DNS loop when attempting to do a callout where the
333 host was specified on an smtp transport, and looking it up yielded more
336 31. Re-factored the code for checking spool and log partition space into a
337 function that finds that data and another that does the check. The former
338 is then used to implement four new variables: $spool_space, $log_space,
339 $spool_inodes, and $log_inodes.
341 32. The RFC2047 encoding function was originally intended for short strings
342 such as real names; it was not keeping to the 75-character limit for
343 encoded words that the RFC imposes. It now respects the limit, and
344 generates multiple encoded words if necessary. To be on the safe side, I
345 have increased the buffer size for the ${rfc2047: expansion operator from
348 33. It is now permitted to omit both strings after an "if" condition; if the
349 condition is true, the result is "true". As before, when the second string
350 is omitted, a false condition yields an empty string. This makes it less
351 cumbersome to write custom ACL and router conditions.
353 34. Failure to deliver a bounce message always caused it to be frozen, even if
354 there was an errors_to setting on the router. The errors_to setting is now
357 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
358 canonical form (fully expanded) before being placed in
359 $sender_host_address.
361 36. The table in the code that translates DNS record types into text (T_A to
362 "A" for instance) was missing entries for NS and CNAME. It is just possible
363 that this could have caused confusion if both these types were looked up
364 for the same domain, because the text type is used as part of Exim's
365 per-process caching. But the chance of anyone hitting this buglet seems
368 37. The dnsdb lookup has been extended in a number of ways.
370 (1) There is a new type, "zns", which walks up the domain tree until it
371 finds some nameserver records. It should be used with care.
373 (2) There is a new type, "mxh", which is like "mx" except that it returns
374 just the host names, not the priorities.
376 (3) It is now possible to give a list of domains (or IP addresses) to be
377 looked up. The behaviour when one of the lookups defers can be
378 controlled by a keyword.
380 (4) It is now possible to specify the separator character for use when
381 multiple records are returned.
383 38. The dnslists ACL condition has been extended: it is now possible to supply
384 a list of IP addresses and/or domains to be looked up in a particular DNS
387 39. Added log_selector=+queue_time_overall.
389 40. When running the queue in the test harness, wait just a tad after forking a
390 delivery process, to get repeatability of debugging output.
392 41. Include certificate and key file names in error message when GnuTLS fails
393 to set them up, because the GnuTLS error message doesn't include the name
394 of the failing file when there is a problem reading it.
396 42. Allow both -bf and -bF in the same test run.
398 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
400 44. The "Exiscan patch" is now merged into the mainline Exim source.
402 45. Sometimes the final signoff response after QUIT could fail to get
403 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
404 < 0 before doing a fflush(). This bug looks as though it goes back to the
405 introduction of TLS in release 3.20, but "sometimes" must have been rare
406 because the tests only now provoked it.
408 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
409 (this can affect the format of dates).
411 47. exim_tidydb, when checking for the continued existence of a message for
412 which it has found a message-specific retry record, was not finding
413 messages that were in split spool directories. Consequently, it was
414 deleting retry records that should have stayed in existence.
416 48. Steve fixed some bugs in eximstats.
418 49. The SPA authentication driver was not abandoning authentication and moving
419 on to the next authenticator when an expansion was forced to fail,
420 contradicting the general specification for all authenticators. Instead it
421 was generating a temporary error. It now behaves as specified.
423 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
424 (the order specifies the preference for clients). The order is now AES256,
425 AES128, 3DES, ARCFOUR128.
427 51. Small patch to Sieve code - explicitly set From: when generating an
430 52. Exim crashed if a remote delivery caused a very long error message to be
431 recorded - for instance if somebody sent an entire SpamAssassin report back
432 as a large number of 550 error lines. This bug was coincidentally fixed by
433 increasing the size of one of Exim's internal buffers (big_buffer) that
434 happened as part of the Exiscan merge. However, to be on the safe side, I
435 have made the code more robust (and fixed the comments that describe what
438 53. Now that there can be additional text after "Completed" in log lines (if
439 the queue_time_overall log selector is set), a one-byte patch to exigrep
440 was needed to allow it to recognize "Completed" as not the last thing in
443 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
444 patch that reportedly fixes this has been added. I am not expert enough to
445 create a test for it. This is what the patch creator wrote:
447 "I found a little strange behaviour of ldap code when working with
448 Windows 2003 AD Domain, where users was placed in more than one
449 Organization Units. When I tried to give exim partial DN, the exit code
450 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
451 But simultaneously result of request was absolutely normal ldap result,
452 so I produce this patch..."
454 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
455 REFERENCE, so I have modified the code to exclude the patch when that macro
458 55. Some experimental protocols are using DNS PTR records for new purposes. The
459 keys for these records are domain names, not reversed IP addresses. The
460 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
461 leaves it alone. Component reversal etc. now happens only for IP addresses.
464 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
466 57. Double the size of the debug message buffer (to 2048) so that more of very
467 long debug lines gets shown.
469 58. The exicyclog utility now does better if the number of log files to keep
470 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
472 59. Two changes related to the smtp_active_hostname option:
474 (1) $smtp_active_hostname is now available as a variable.
475 (2) The default for smtp_banner uses $smtp_active_hostname instead
476 of $primary_hostname.
478 60. The host_aton() function is supposed to be passed a string that is known
479 to be a valid IP address. However, in the case of IPv6 addresses, it was
480 not checking this. This is a hostage to fortune. Exim now panics and dies
481 if the condition is not met. A case was found where this could be provoked
482 from a dnsdb PTR lookup with an IPv6 address that had more than 8
483 components; fortuitously, this particular loophole had already been fixed
484 by change 4.50/55 above.
486 If there are any other similar loopholes, the new check in host_aton()
487 itself should stop them being exploited. The report I received stated that
488 data on the command line could provoke the exploit when Exim was running as
489 exim, but did not say which command line option was involved. All I could
490 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
494 61. There was a buffer overflow vulnerability in the SPA authentication code
495 (which came originally from the Samba project). I have added a test to the
496 spa_base64_to_bits() function which I hope fixes it.
499 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
500 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
502 63. The daemon start-up calls getloadavg() while still root for those OS that
503 need the first call to be done as root, but it missed one case: when
504 deliver_queue_load_max is set with deliver_drop_privilege. This is
505 necessary for the benefit of the queue runner, because there is no re-exec
506 when deliver_drop_privilege is set.
508 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
511 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
512 was in use, was not putting the data itself into the right store pool;
513 consequently, it could be overwritten for a subsequent message in the same
514 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
517 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
519 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
520 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
521 the function were treating the return as a boolean value, which happened to
522 work because 0=false and not-0=true, but is not correct code.
524 68. The host_aton() function was not handling scoped IPv6 addresses (those
525 with, for example, "%eth0" on the end) correctly.
527 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
528 negated items (that is, ~something) in unsigned ints. Some compilers
529 apparently mutter when there is no cast.
531 70. If an address verification called from an ACL failed, and did not produce a
532 user-specific message (i.e. there was only a "system" message), nothing was
533 put in $acl_verify_message. In this situation, it now puts the system
536 71. Change 4.23/11 added synchronization checking at the start of an SMTP
537 session; change 4.31/43 added the unwanted input to the log line - except
538 that it did not do this in the start of session case. It now does.
540 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
541 This is wrong and can cause the other end to generate a synchronization
542 error if it is another Exim or anything else that does the synchronization
543 check. A QUIT command is no longer sent after a timeout.
545 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
548 74. The defer_ok option of callout verification was not working if it was used
549 when verifying addresses in header lines, that is, for this case:
551 verify = header_sender/callout=defer_ok
553 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
554 those file descriptors could be used for SMTP connections. If anything
555 wrote to stderr (the example that came up was "warn" in embedded Perl), it
556 could be sent to the SMTP client, causing chaos. The daemon now opens
557 stdin, stdout, and stderr to /dev/null when it puts itself into the
560 76. Arrange for output from Perl's "warn" command to be written to Exim's main
561 log by default. The user can override this with suitable Perl magic.
563 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
564 the log message when discard triggers, was not working for the DATA ACL or
565 for the non-SMTP ACL.
567 78. Error message wording change in sieve.c.
569 79. If smtp_accept_max_per_host was set, the number of connections could be
570 restricted to fewer than expected, because the daemon was trying to set up
571 a new connection before checking whether the processes handling previous
572 connections had finished. The check for completed processes is now done
573 earlier. On busy systems, this bug wouldn't be noticed because something
574 else would have woken the daemon, and it would have reaped the completed
577 80. If a message was submitted locally by a user whose login name contained one
578 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
579 It caused a spool format error. I have fixed the spool reading code. A
580 related problem was that the "from" clause in the Received: line became
581 illegal because of the space(s). It is now covered by ${quote_local_part.
583 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
586 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
588 83. Patch from Sieve maintainer to fix unterminated string problem in
591 84. Some minor changes to the Linux configuration files to help with other
592 OS variants using glibc.
594 85. One more patch for Sieve to update vacation handling to latest spec.
597 ----------------------------------------------------
598 See the note above about the 4.44 and 4.50 releases.
599 ----------------------------------------------------
605 1. Change 4.43/35 introduced a bug that caused file counts to be
606 incorrectly computed when quota_filecount was set in an appendfile
609 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
610 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
613 3. Give more explanation in the error message when the command for a transport
614 filter fails to execute.
616 4. There are several places where Exim runs a non-Exim command in a
617 subprocess. The SIGUSR1 signal should be disabled for these processes. This
618 was being done only for the command run by the queryprogram router. It is
619 now done for all such subprocesses. The other cases are: ${run, transport
620 filters, and the commands run by the lmtp and pipe transports.
622 5. Some older OS have a limit of 256 on the maximum number of file
623 descriptors. Exim was using setrlimit() to set 1000 as a large value
624 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
625 systems. I've change it so that if it can't get 1000, it tries for 256.
627 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
628 was an oversight, and furthermore, ever since the addition of extra
629 controls (e.g. 4.43/32), the checks on when to allow different forms of
630 "control" were broken. There should now be diagnostics for all cases when a
631 control that does not make sense is encountered.
633 7. $recipients is now available in the predata ACL (oversight).
635 8. Tidy the search cache before the fork to do a delivery from a message
636 received from the command line. Otherwise the child will trigger a lookup
637 failure and thereby defer the delivery if it tries to use (for example) a
638 cached ldap connection that the parent has called unbind on.
640 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
641 of $address_data from the recipient verification was clobbered by the
644 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
645 was its contents. (It was OK if the option was not defined at all.)
647 11. A "Completed" log line is now written for messages that are removed from
648 the spool by the -Mrm option.
650 12. $host_address is now set to the target address during the checking of
653 13. When checking ignore_target_hosts for an ipliteral router, no host name was
654 being passed; this would have caused $sender_host_name to have been used if
655 matching the list had actually called for a host name (not very likely,
656 since this list is usually IP addresses). A host name is now passed as
659 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
660 code that specifies a non-restarting handler (typically sigaction() in
661 modern systems) in an attempt to fix a rare and obscure crash bug.
663 15. Narrowed the window for a race in the daemon that could cause it to ignore
664 SIGCHLD signals. This is not a major problem, because they are used only to
665 wake it up if nothing else does.
667 16. A malformed maildirsize file could cause Exim to calculate negative values
668 for the mailbox size or file count. Odd effects could occur as a result.
669 The maildirsize information is now recalculated if the size or filecount
672 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
673 support for a long time. Removed HAVE_SYS_VFS_H.
675 18. Updated exipick to current release from John Jetmore.
677 19. Allow an empty sender to be matched against a lookup in an address list.
678 Previously the only cases considered were a regular expression, or an
681 20. Exim went into a mad DNS lookup loop when doing a callout where the
682 host was specified on the transport, if the DNS lookup yielded more than
685 21. The RFC2047 encoding function was originally intended for short strings
686 such as real names; it was not keeping to the 75-character limit for
687 encoded words that the RFC imposes. It now respects the limit, and
688 generates multiple encoded words if necessary. To be on the safe side, I
689 have increased the buffer size for the ${rfc2047: expansion operator from
692 22. Failure to deliver a bounce message always caused it to be frozen, even if
693 there was an errors_to setting on the router. The errors_to setting is now
696 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
697 canonical form (fully expanded) before being placed in
698 $sender_host_address.
700 24. Updated eximstats to version 1.33
702 25. Include certificate and key file names in error message when GnuTLS fails
703 to set them up, because the GnuTLS error message doesn't include the name
704 of the failing file when there is a problem reading it.
706 26. Expand error message when OpenSSL has problems setting up cert/key files.
709 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
710 (this can affect the format of dates).
712 28. exim_tidydb, when checking for the continued existence of a message for
713 which it has found a message-specific retry record, was not finding
714 messages that were in split spool directories. Consequently, it was
715 deleting retry records that should have stayed in existence.
717 29. eximstats updated to version 1.35
718 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
719 1.35 - bugfix such that pie charts by volume are generated correctly
721 30. The SPA authentication driver was not abandoning authentication and moving
722 on to the next authenticator when an expansion was forced to fail,
723 contradicting the general specification for all authenticators. Instead it
724 was generating a temporary error. It now behaves as specified.
726 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
727 (the order specifies the preference for clients). The order is now AES256,
728 AES128, 3DES, ARCFOUR128.
730 31. Small patch to Sieve code - explicitly set From: when generating an
733 32. Exim crashed if a remote delivery caused a very long error message to be
734 recorded - for instance if somebody sent an entire SpamAssassin report back
735 as a large number of 550 error lines. This bug was coincidentally fixed by
736 increasing the size of one of Exim's internal buffers (big_buffer) that
737 happened as part of the Exiscan merge. However, to be on the safe side, I
738 have made the code more robust (and fixed the comments that describe what
741 33. Some experimental protocols are using DNS PTR records for new purposes. The
742 keys for these records are domain names, not reversed IP addresses. The
743 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
744 leaves it alone. Component reversal etc. now happens only for IP addresses.
747 34. The host_aton() function is supposed to be passed a string that is known
748 to be a valid IP address. However, in the case of IPv6 addresses, it was
749 not checking this. This is a hostage to fortune. Exim now panics and dies
750 if the condition is not met. A case was found where this could be provoked
751 from a dnsdb PTR lookup with an IPv6 address that had more than 8
752 components; fortuitously, this particular loophole had already been fixed
753 by change 4.50/55 or 4.44/33 above.
755 If there are any other similar loopholes, the new check in host_aton()
756 itself should stop them being exploited. The report I received stated that
757 data on the command line could provoke the exploit when Exim was running as
758 exim, but did not say which command line option was involved. All I could
759 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
763 35. There was a buffer overflow vulnerability in the SPA authentication code
764 (which came originally from the Samba project). I have added a test to the
765 spa_base64_to_bits() function which I hope fixes it.
768 36. The daemon start-up calls getloadavg() while still root for those OS that
769 need the first call to be done as root, but it missed one case: when
770 deliver_queue_load_max is set with deliver_drop_privilege. This is
771 necessary for the benefit of the queue runner, because there is no re-exec
772 when deliver_drop_privilege is set.
774 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
775 was in use, was not putting the data itself into the right store pool;
776 consequently, it could be overwritten for a subsequent message in the same
777 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
780 38. Sometimes the final signoff response after QUIT could fail to get
781 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
782 < 0 before doing a fflush(). This bug looks as though it goes back to the
783 introduction of TLS in release 3.20, but "sometimes" must have been rare
784 because the tests only now provoked it.
790 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
791 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
792 Now it returns an integer. A number of calls were still expecting a T/F
793 return. Fortuitously, in all cases, the tests worked in OK situations,
794 which is the norm. However, things would have gone wrong on any write
795 failures on the smtp file descriptor. This function is used when sending
796 messages over SMTP and also when doing verify callouts.
798 2. When Exim is called to do synchronous delivery of a locally submitted
799 message (the -odf or -odi options), it no longer closes stderr before doing
802 3. Implemented the mua_wrapper option.
804 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
806 5. Implemented the functions header_remove(), header_testname(),
807 header_add_at_position(), and receive_remove_recipient(), and exported them
810 6. If an ACL "warn" statement specified the addition of headers, Exim already
811 inserted X-ACL-Warn: at the start if there was no header name. However, it
812 was not making this test for the second and subsequent header lines if
813 there were newlines in the string. This meant that an invalid header could
814 be inserted if Exim was badly configured.
816 7. Allow an ACL "warn" statement to add header lines at the start or after all
817 the Received: headers, as well as at the end.
819 8. Added the rcpt_4xx retry error code.
821 9. Added postmaster_mailfrom=xxx to callout verification option.
823 10. Added mailfrom=xxxx to the callout verification option, for verify=
826 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
827 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
829 12. Inserted some casts to stop certain compilers warning when using pointer
830 differences as field lengths or precisions in printf-type calls (mostly
831 affecting debugging statements).
833 13. Added optional readline() support for -be (dynamically loaded).
835 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
836 same clock tick as a message's arrival, so that its received time was the
837 same as the "first fail" time on the retry record, and that message
838 remained on the queue past the ultimate address timeout, every queue runner
839 would try a delivery (because it was past the ultimate address timeout) but
840 after another failure, the ultimate address timeout, which should have then
841 bounced the address, did not kick in. This was a "< instead of <=" error;
842 in most cases the first failure would have been in the next clock tick
843 after the received time, and all would be well.
845 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
846 being recognized when the domain list was tested by the match_domain
847 condition in an expansion string.
849 16. Added the ${str2b64: operator.
851 17. Exim was always calling setrlimit() to set a large limit for the number of
852 processes, without checking whether the existing limit was already
853 adequate. (It did check for the limit on file descriptors.) Furthermore,
854 errors from getrlimit() and setrlimit() were being ignored. Now they are
855 logged to the main and panic logs, but Exim does carry on, to try to do its
856 job under whatever limits there are.
858 18. Imported PCRE 5.0.
860 19. Trivial typo in log message " temporarily refused connection" (the leading
863 20. If the log selector return_path_on_delivery was set and an address was
864 redirected to /dev/null, the delivery process crashed because it assumed
865 that a return path would always be set for a "successful" delivery. In this
866 case, the whole delivery is bypassed as an optimization, and therefore no
869 21. Internal re-arrangement: the function for sending a challenge and reading
870 a response while authentication was assuming a zero-terminated challenge
871 string. It's now changed to take a pointer and a length, to allow for
872 binary data in such strings.
874 22. Added the cyrus_sasl authenticator (code supplied by MBM).
876 23. Exim was not respecting finduser_retries when seeking the login of the
877 uid under which it was called; it was always trying 10 times. (The default
878 setting of finduser_retries is zero.) Also, it was sleeping after the final
879 failure, which is pointless.
881 24. Implemented tls_on_connect_ports.
883 25. Implemented acl_smtp_predata.
885 26. If the domain in control=submission is set empty, Exim assumes that the
886 authenticated id is a complete email address when it generates From: or
887 Sender: header lines.
889 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
890 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
891 chown and chgrp in /bin and hostname in /usr/bin.
893 28. Exim was keeping the "process log" file open after each use, just as it
894 does for the main log. This opens the possibility of it remaining open for
895 long periods when the USR1 signal hits a daemon. Occasional processlog
896 errors were reported, that could have been caused by this. Anyway, it seems
897 much more sensible not to leave this file open at all, so that is what now
900 29. The long-running daemon process does not normally write to the log once it
901 has entered its main loop, and it closes the log before doing so. This is
902 so that log files can straightforwardly be renamed and moved. However,
903 there are a couple of unusual error situations where the daemon does write
904 log entries, and I had neglected to close the log afterwards.
906 30. The text of an SMTP error response that was received during a remote
907 delivery was being truncated at 512 bytes. This is too short for some of
908 the long messages that one sometimes sees. I've increased the limit to
911 31. It is now possible to make retry rules that apply only when a message has a
912 specific sender, in particular, an empty sender.
914 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
915 it possible to be selective about when SMTP synchronization is enforced.
917 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
919 32. Implemented hosts_connection_nolog.
921 33. Added an ACL for QUIT.
923 34. Setting "delay_warning=" to disable warnings was not working; it gave a
926 35. Added mailbox_size and mailbox_filecount to appendfile.
928 36. Added control = no_multiline_responses to ACLs.
930 37. There was a bug in the logic of the code that waits for the clock to tick
931 in the case where the clock went backwards by a substantial amount such
932 that the microsecond fraction of "now" was more than the microsecond
933 fraction of "then" (but the whole seconds number was less).
935 38. Added support for the libradius Radius client library this is found on
936 FreeBSD (previously only the radiusclient library was supported).
942 1. When certain lookups returned multiple values in the form name=value, the
943 quoting of the values was not always being done properly. Specifically:
944 (a) If the value started with a double quote, but contained no whitespace,
946 (b) If the value contained whitespace other than a space character (i.e.
947 tabs or newlines or carriage returns) it was not quoted.
948 This fix has been applied to the mysql and pgsql lookups by writing a
949 separate quoting function and calling it from the lookup code. The fix
950 should probably also be applied to nisplus, ibase and oracle lookups, but
951 since I cannot test any of those, I have not disturbed their existing code.
953 2. A hit in the callout cache for a specific address caused a log line with no
954 reason for rejecting RCPT. Now it says "Previous (cached) callout
955 verification failure".
957 3. There was an off-by-one bug in the queryprogram router. An over-long
958 return line was truncated at 256 instead of 255 characters, thereby
959 overflowing its buffer with the terminating zero. As well as fixing this, I
960 have increased the buffer size to 1024 (and made a note to document this).
962 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
963 when Exim is waiting for an SMTP response from a remote server, Exim
964 restarts its select() call on the socket, thereby resetting its timeout.
965 This is not a problem when such interrupts are rare. Somebody set up a cron
966 job to run exiwhat every 2 minutes, which is less than the normal select()
967 timeout (5 or 10 minutes). This meant that the select() timeout never
968 kicked in because it was always reset. I have fixed this by comparing the
969 time when an interrupt arrives with the time at the start of the first call
970 to select(). If more time than the timeout has elapsed, the interrupt is
971 treated as a timeout.
973 5. Some internal re-factoring in preparation for the addition of Sieve
974 extensions (by MH). In particular, the "personal" test is moved to a
975 separate function, and given an option for scanning Cc: and Bcc: (which is
976 not set for Exim filters).
978 6. When Exim created an email address using the login of the caller as the
979 local part (e.g. when creating a From: or Sender: header line), it was not
980 quoting the local part when it contained special characters such as @.
982 7. Installed new OpenBSD configuration files.
984 8. Reworded some messages for syntax errors in "and" and "or" conditions to
985 try to make them clearer.
987 9. Callout options, other than the timeout value, were being ignored when
988 verifying sender addresses in header lines. For example, when using
990 verify = header_sender/callout=no_cache
992 the cache was (incorrectly) being used.
994 10. Added a missing instance of ${EXE} to the exim_install script; this affects
995 only the Cygwin environment.
997 11. When return_path_on_delivery was set as a log selector, if different remote
998 addresses in the same message used different return paths and parallel
999 remote delivery occurred, the wrong values would sometimes be logged.
1000 (Whenever a remote delivery process finished, the return path value from
1001 the most recently started remote delivery process was logged.)
1003 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
1004 lines when AUTH and/or TLS are in use. This is the "received protocol"
1005 field. Exim used to use "asmtp" for authenticated SMTP, without any
1006 indication (in the protocol name) for TLS use. Now it follows the RFC and
1007 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
1008 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
1009 names appear in log lines as well as in Received: header lines.
1011 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
1012 extensions, and comparison tests, and to fix some bugs.
1014 14. Changes to the "personal" filter test:
1016 (1) The test was buggy in that it was just doing the equivalent of
1017 "contains" tests on header lines. For example, if a user's address was
1018 anne@some.where, the "personal" test would incorrectly be true for
1020 To: susanne@some.where
1022 This test is now done by extracting each address from the header in turn,
1023 and checking the entire address. Other tests that are part of "personal"
1024 are now done using regular expressions (for example, to check local parts
1025 of addresses in From: header lines).
1027 (2) The list of non-personal local parts in From: addresses has been
1028 extended to include "listserv", "majordomo", "*-request", and "owner-*",
1029 taken from the Sieve specification recommendations.
1031 (3) If the message contains any header line starting with "List-" it is
1032 treated as non-personal.
1034 (4) The test for "circular" in the Subject: header line has been removed
1035 because it now seems ill-conceived.
1037 15. Minor typos in src/EDITME comments corrected.
1039 16. Installed latest exipick from John Jetmore.
1041 17. If headers_add on a router specified a text string that was too long for
1042 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
1043 of string_sprintf() is now avoided.
1045 18. $message_body_size was not set (it was always zero) when running the DATA
1046 ACL and the local_scan() function.
1048 19. For the "mail" command in an Exim filter, no default was being set for
1049 the once_repeat time, causing a random time value to be used if "once" was
1050 specified. (If the value happened to be <= 0, no repeat happened.) The
1051 default is now 0s, meaning "never repeat". The "vacation" command was OK
1052 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
1053 (I found it when inspecting the code).
1055 20. There is now an overall timeout for performing a callout verification. It
1056 defaults to 4 times the callout timeout, which applies to individual SMTP
1057 commands during the callout. The overall timeout applies when there is more
1058 than one host that can be tried. The timeout is checked before trying the
1059 next host. This prevents very long delays if there are a large number of
1060 hosts and all are timing out (e.g. when the network connections are timing
1061 out). The value of the overall timeout can be changed by specifying an
1062 additional sub-option for "callout", called "maxwait". For example:
1064 verify = sender/callout=5s,maxwait=20s
1066 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
1067 to the end before writing, but this should make it even safer).
1069 22. Exim was forgetting that it had advertised PIPELINING for the second and
1070 subsequent messages on an SMTP connection. It was also not resetting its
1071 memory on STARTTLS and an internal HELO.
1073 23. When Exim logs an SMTP synchronization error within a session, it now
1074 records whether PIPELINING has been advertised or not.
1076 24. Added 3 instances of "(long int)" casts to time_t variables that were being
1077 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
1078 rather than long int.
1080 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
1082 26. Added the never_mail option to autoreply.
1088 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
1089 crash if the getsockname() call failed; this can happen if a connection is
1090 closed very soon after it is established. The problem was simply in the
1091 order in which certain operations were done, causing Exim to try to write
1092 to the SMTP stream before it had set up the file descriptor. The bug has
1093 been fixed by making things happen in the correct order.
1099 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
1100 before the connection was closed, thus losing the rejection response.
1102 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
1103 some early Solaris releases, but causes trouble in current releases where
1104 socklen_t is defined.
1106 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
1109 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
1112 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
1113 that releasing the top of it at the end releases what was used for sub-
1114 expansions (unless the block got too big). However, discard this block if
1115 the first thing is a variable or header, so that we can use its block when
1116 it is dynamic (useful for very large $message_headers, for example).
1118 6. Lookups now cache *every* query, not just the most recent. A new, separate
1119 store pool is used for this. It can be recovered when all lookup caches are
1120 flushed. Lookups now release memory at the end of their result strings.
1121 This has involved some general refactoring of the lookup sources.
1123 7. Some code has been added to the store_xxx() functions to reduce the amount
1124 of flapping under certain conditions.
1126 8. log_incoming_interface used to affect only the <= reception log lines. Now
1127 it causes the local interface and port to be added to several more SMTP log
1128 lines, for example "SMTP connection from", and rejection lines.
1130 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
1132 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
1134 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
1135 could be overwritten at the end of the current message (or the start of a
1136 new message if it was set in a HELO ACL). The value is now preserved for
1137 the duration of the SMTP connection.
1139 12. If a transport had a headers_rewrite setting, and a matching header line
1140 contained an unqualified address, that address was qualified, even if it
1141 did not match any rewriting rules. The underlying bug was that the values
1142 of the flags that permit the existence of unqualified sender and recipient
1143 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
1144 non-local messages, and by -bnq for local messages) were not being
1145 preserved with the message after it was received.
1147 13. When Exim was logging an SMTP synchronization error, it could sometimes log
1148 "next input=" as part of the text comprising the host identity instead of
1149 the correct text. The code was using the same buffer for two different
1150 strings. However, depending on which order the printing function evaluated
1151 its arguments, the bug did not always show up. Under Linux, for example, my
1152 test suite worked just fine.
1154 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
1155 doesn't work with some older versions of Perl. It has been changed to "my",
1156 which in any case is probably the better facility to use.
1158 15. A really picky compiler found some instances of statements for creating
1159 error messages that either had too many or two few arguments for the format
1162 16. The size of the buffer for calls to the DNS resolver has been increased
1163 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
1164 for addresses that have a lot of PTR records. This alleviates a problem; it
1165 does not fully solve it.
1167 17. A dnsdb lookup for PTR records that receives more data than will fit in the
1168 buffer now truncates the list and logs the incident, which is the same
1169 action as happens when Exim is looking up a host name and its aliases.
1170 Previously in this situation something unpredictable would happen;
1171 sometimes it was "internal error: store_reset failed".
1173 18. If a server dropped the connection unexpectedly when an Exim client was
1174 using GnuTLS and trying to read a response, the client delivery process
1175 crashed while trying to generate an error log message.
1177 19. If a "warn" verb in an ACL added multiple headers to a message in a single
1178 string, for example:
1180 warn message = H1: something\nH2: something
1182 the text was added as a single header line from Exim's point of view
1183 though it ended up OK in the delivered message. However, searching for the
1184 second and subsequent header lines using $h_h2: did not work. This has been
1185 fixed. Similarly, if a system filter added multiple headers in this way,
1186 the routers could not see them.
1188 20. Expanded the error message when iplsearch is called with an invalid key to
1189 suggest using net-iplsearch in a host list.
1191 21. When running tests using -bh, any delays imposed by "delay" modifiers in
1192 ACLs are no longer actually imposed (and a message to that effect is
1195 22. If a "gecos" field in a passwd entry contained escaped characters, in
1196 particular, if it contained a \" sequence, Exim got it wrong when building
1197 a From: or a Sender: header from that name. A second bug also caused
1198 incorrect handling when an unquoted " was present following a character
1199 that needed quoting.
1201 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1202 was not being matched caselessly.
1204 24. Arranged for all hyphens in the exim.8 source to be escaped with
1207 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1208 properly. Recipient callout cache records were still being keyed to include
1209 the sender, even when use_sender was set false. This led to far more
1210 callouts that were necessary. The sender is no longer included in the key
1211 when use_sender is false.
1213 26. Added "control = submission" modifier to ACLs.
1215 27. Added the ${base62d: operator to decode base 62 numbers.
1217 28. dnsdb lookups can now access SRV records.
1219 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1220 the configuration file.
1222 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1223 (-v) mode. This makes the output for a verbose queue run more intelligible.
1225 31. Added a use_postmaster feature to recipient callouts.
1227 32. Added the $body_zerocount variable, containing the number of binary zero
1228 bytes in the message body.
1230 33. The time of last modification of the "new" subdirectory is now used as the
1231 "mailbox time last read" when there is a quota error for a maildir
1234 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
1236 35. Added +ignore_unknown as a special item in host lists.
1238 36. Code for decoding IPv6 addresses in host lists is now included, even if
1239 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1240 address was recognized as an IP address, but was then not correctly decoded
1241 into binary, causing unexpected and incorrect effects when compared with
1248 1. Very minor rewording of debugging text in manualroute to say "list of
1249 hosts" instead of "hostlist".
1251 2. If verify=header_syntax was set, and a header line with an unqualified
1252 address (no domain) and a large number of spaces between the end of the
1253 name and the colon was received, the reception process suffered a buffer
1254 overflow, and (when I tested it) crashed. This was caused by some obsolete
1255 code that should have been removed. The fix is to remove it!
1257 3. When running in the test harness, delay a bit after writing a bounce
1258 message to get a bit more predictability in the log output.
1260 4. Added a call to search_tidyup() just before forking a reception process. In
1261 theory, someone could use a lookup in the expansion of smtp_accept_max_
1262 per_host which, without the tidyup, could leave open a database connection.
1264 5. Added the variables $recipient_data and $sender_data which get set from a
1265 lookup success in an ACL "recipients" or "senders" condition, or a router
1266 "senders" option, similar to $domain_data and $local_part_data.
1268 6. Moved the writing of debug_print from before to after the "senders" test
1271 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1272 problems for message scanning, either using a data ACL, or using
1273 local_scan() because the Received: header was not generated till after they
1274 were called (in order to set the time as the time of reception completion).
1275 I have revised the way this works. The header is now generated after the
1276 body is received, but before the ACL or local_scan() are called. After they
1277 are run, the timestamp in the header is updated.
1283 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1284 before starting a queue runner without re-exec. This happened only when
1285 deliver_drop_privilege was set or when the Exim user was set to root. The
1286 effect of the bug was that timeouts during subsequent deliveries caused
1287 crashes instead of being properly handled. The handler is now left at its
1288 default (and expected) setting.
1290 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1291 message, again when deliver_drop_privilege is set or Exim is run as root.
1292 The bug described in (1) was not present in this case, but the tidying up
1293 of the other signals was missing. I have made the two cases consistent.
1295 3. The ignore_target_hosts setting on a manualroute router was being ignored
1296 for hosts that were looked up using the /MX notation.
1298 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1301 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1302 operated on the sender address. After changing the $sender_address to <>
1303 for the sender address verify, Exim was re-instated it as the original
1304 (before rewriting) address, but remembering that it had rewritten it, so it
1305 wasn't rewriting it again. This bug also had the effect of breaking the
1306 sender address verification caching when the sender address was rewritten.
1308 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1309 This has been changed so that if the ip literal address matches
1310 ignore_target_hosts, the router declines.
1312 7. Added expansion conditions match_domain, match_address, and match_local_
1313 part (NOT match_host).
1315 8. The placeholder for the Received: header didn't have a length field set.
1317 9. Added code to Exim itself and to exim_lock to test for a specific race
1318 condition that could lead to file corruption when using MBX delivery. The
1319 issue is with the lockfile that is created in /tmp. If this file is removed
1320 after a process has opened it but before that process has acquired a lock,
1321 there is the potential for a second process to recreate the file and also
1322 acquire a lock. This could lead to two Exim processes writing to the file
1323 at the same time. The added code performs the same test as UW imapd; it
1324 checks after acquiring the lock that its file descriptor still refers to
1325 the same named file.
1327 10. The buffer for building added header lines was of fixed size, 8192 bytes.
1328 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1331 11. Added the smtp_active_hostname option. If used, this will typically be made
1332 to depend on the incoming interface address. Because $interface_address is
1333 not set up until the daemon has forked a reception process, error responses
1334 that can happen earlier (such as "too many connections") no longer contain
1337 12. If an expansion in a condition on a "warn" statement fails because a lookup
1338 defers, the "warn" statement is abandoned, and the next ACL statement is
1339 processed. Previously this caused the whole ACL to be aborted.
1341 13. Added the iplsearch lookup type.
1343 14. Added ident_timeout as a log selector.
1345 15. Added tls_certificate_verified as a log selector.
1347 16. Added a global option tls_require_ciphers (compare the smtp transport
1348 option of the same name). This controls incoming TLS connections.
1350 17. I finally figured out how to make tls_require_ciphers do a similar thing
1351 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1352 before starting the TLS session.
1354 18. Tabs are now shown as \t in -bP output.
1356 19. If the log selector return_path_on_delivery was set, Exim crashed when
1357 bouncing a message because it had too many Received: header lines.
1359 20. If two routers both had headers_remove settings, and the first one included
1360 a superfluous trailing colon, the final name in the first list and the
1361 first name in the second list were incorrectly joined into one item (with a
1362 colon in the middle).
1368 1. Added -C and -D options to the exinext utility, mainly to make it easier
1369 to include in the automated testing, but these could be helpful when
1370 multiple configurations are in use.
1372 2. The exinext utility was not formatting the output nicely when there was
1373 an alternate port involved in the retry record key, nor when there was a
1374 message id as well (for retries that were specific to a specific message
1375 and a specific host). It was also confused by IPv6 addresses, because of
1376 the additional colons they contain. I have fixed the IPv4 problem, and
1377 patched it up to do a reasonable job for IPv6.
1379 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1380 delivery, the log line now contains "pipelined" if PIPELINING was used.
1382 4. An SMTP transport process used to panic and die if the bind() call to set
1383 an explicit outgoing interface failed. This has been changed; it is now
1384 treated in the same way as a connect() failure.
1386 5. A reference to $sender_host_name in the part of a conditional expansion
1387 that was being skipped was still causing a DNS lookup. This no longer
1390 6. The def: expansion condition was not recognizing references to header lines
1391 that used bh_ and bheader_.
1393 7. Added the _cache feature to named lists.
1395 8. The code for checking quota_filecount in the appendfile transport was
1396 allowing one more file than it should have been.
1398 9. For compatibility with Sendmail, the command line option
1406 and sets the incoming protocol and host name (for trusted callers). The
1407 host name and its colon can be omitted when only the protocol is to be set.
1408 Note the Exim already has two private options, -pd and -ps, that refer to
1409 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1410 "s", but I don't think that's a major issue.
1412 10. A number of refactoring changes to the code, none of which should affect
1415 (a) The number of logging options was getting close to filling up the
1416 32-bit word that was used as a bit map. I have split them into two classes:
1417 those that are passed in the argument to log_write(), and those that are
1418 only ever tested independently outside of that function. These are now in
1419 separate 32-bit words, so there is plenty of room for expansion again.
1420 There is no change in the user interface or the logging behaviour.
1422 (b) When building, for example, log lines, the code previously used a
1423 macro that called string_cat() twice, in order to add two strings. This is
1424 not really sufficiently general. Furthermore, there was one instance where
1425 it was actually wrong because one of the argument was used twice, and in
1426 one call a function was used. (As it happened, calling the function twice
1427 did not affect the overall behaviour.) The macro has been replaced by a
1428 function that can join an arbitrary number of extra strings onto a growing
1431 (c) The code for expansion conditions now uses a table and a binary chop
1432 instead of a serial search (which was left over from when there were very
1433 few conditions). Also, it now recognizes conditions like "pam" even when
1434 the relevant support is not compiled in: a suitably worded error message is
1435 given if an attempt is made to use such a condition.
1437 11. Added ${time_interval:xxxxx}.
1439 12. A bug was causing one of the ddress fields not to be passed back correctly
1440 from remote delivery subprocesses. The field in question was not being
1441 subsequently used, so this caused to problems in practice.
1443 13. Added new log selectors queue_time and deliver_time.
1445 14. Might have fixed a bug in maildirsizefile handling that threw up
1446 "unexpected character" debug warnings, and recalculated the data
1447 unnecessarily. In any case, I expanded the warning message to give more
1450 15. Added the message "Restricted characters in address" to the statements in
1451 the default ACL that block characters like @ and % in local parts.
1453 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
1454 Three changes have been made:
1456 (a) There was a serious bug; a negative response to MAIL caused the whole
1457 recipient domain to be cached as invalid, thereby blocking all messages
1458 to all local parts at the same domain, from all senders. This bug has
1459 been fixed. The domain is no longer cached after a negative response to
1460 MAIL if the sender used is not empty.
1462 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1465 (c) A new callout option, "use_sender" has been added for people who want
1466 the modified behaviour.
1472 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1475 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1476 indeed breaks things for older releases.
1478 3. Added additional logging to the case where there is a problem reading data
1479 from a filter that is running in a subprocess using a pipe, in order to
1480 try to track down a specific problem.
1482 4. Testing facility fudge: when running in the test harness and attempting
1483 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1484 getting "No route to host". Convert this to a timeout.
1486 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1489 6. Some OS don't have socklen_t but use size_t instead. This affects the
1490 fifth argument of getsockopt() amongst other things. This is now
1491 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1492 can be set for individual OS. I have set it for SunOS5, OSF1, and
1493 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1494 some earlier ones do not.
1496 7. Change 4.30/15 was not doing the test caselessly.
1498 8. The standard form for an IPv6 address literal was being rejected by address
1499 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1500 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1501 this, as well as the form without the "IPv6" on the front (but only when
1502 address literals are enabled, of course).
1504 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
1506 10. Exim crashed if a message with an empty sender address specified by -f
1507 encountered a router with an errors_to setting. This could be provoked only
1508 by a command such as
1512 where an empty string was supplied; "<>" did not hit this bug.
1514 11. Installed PCRE release 4.5.
1516 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1517 remained set. It is now erased.
1519 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1520 times from message ids (which are base 36 rather than the normal 62).
1522 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1523 were being counted as actual protocol errors, and logged if the log
1524 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1525 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1526 and DATA following a set of rejected RCPTs do not count as protocol errors.
1527 In other words, Exim assumes they were pipelined, though this may not
1528 actually be the case. Of course, in all cases the client gets an
1529 appropriate error code.
1531 15. If a lookup fails in an ACL condition, a message about the failure may
1532 be available; it is used if testing the ACL cannot continue, because most
1533 such messages specify what the cause of the deferral is. However, some
1534 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1535 that caused an old message to be retained and used if a later statement
1536 caused a defer, replacing the real cause of the deferral.
1538 16. If an IP address had so many PTR records that the DNS lookup buffer
1539 was not large enough to hold them, Exim could crash while trying to process
1540 the truncated data. It now detects and logs this case.
1542 17. Further to 4.21/58, another change has been made: if (and only if) the
1543 first line of a message (the first header line) ends with CRLF, a bare LF
1544 in a subsequent header line has a space inserted after it, so as not to
1545 terminate the header.
1547 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
1548 unnecessarily, used atoi() instead of strtol(), and didn't check the
1549 termination when getting file sizes from file names by regex.
1551 19. Completely re-implemented the support for maildirsize files, in the light
1552 of a number of problems with the previous contributed implementation
1553 (4.30/29). In particular:
1555 . If the quota is zero, the maildirsize file is maintained, but no quota is
1558 . If the maildir directory does not exist, it is created before any attempt
1559 to write a maildirsize file.
1561 . The quota value in the file is just a cache; if the quota is changed in
1562 the transport, the new value overrides.
1564 . A regular expression is available for excluding directories from the
1567 20. The autoreply transport checks the characters in options that define the
1568 message's headers; it allows continued headers, but it was checking with
1569 isspace() after an embedded newline instead of explicitly looking for a
1572 21. If all the "regular" hosts to which an address was routed had passed their
1573 expiry times, and had not reached their retry times, the address was
1574 bounced, even if fallback hosts were defined. Now Exim should go on to try
1577 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1578 equivalent code in the SMTP transport. Some hosts send humungous responses
1579 to HELO/EHLO, more than 1024 it seems.
1581 23. Refactoring: code in filter.c used (void *) for "any old type" but this
1582 gives compiler warnings in some environments. I've now done it "properly",
1585 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1586 (because of problems with the built-in one) was declared to return uschar *
1587 instead of char *, causing compiler failure.
1589 25. Fixed a file descriptor leak when processing alias/forward files.
1591 26. Fixed a minor format string issue in dbfn.c.
1593 27. Typo in exim.c: ("dmbnz" for "dbmnz").
1595 28. If a filter file refered to $h_xxx or $message_headers, and the headers
1596 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1599 29. When a sender address is verified, it is cached, to save repeating the test
1600 when there is more than one recipient in a message. However, when the
1601 verification involves a callout, it is possible for different callout
1602 options to be set for different recipients. It is too complicated to keep
1603 track of this in the cache, so now Exim always runs a verification when a
1604 callout is required, relying on the callout cache for the optimization.
1605 The overhead is duplication of the address routing, but this should not be
1608 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
1609 to be verified with callout=postmaster, and the main callout worked but the
1610 postmaster check failed, the verification correctly failed. However, if a
1611 subsequent RCPT command asked for sender verification *without* the
1612 postmaster check, incorrect caching caused this verification also to fail,
1615 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1616 it was not caching the DNS options (qualify_single, search_parents) that
1617 were used when the lookup failed. A subsequent lookup with different
1618 options therefore always gave the same answer, though there were cases
1619 where it should not have. (Example: a "domains = !$mx_any" option on a
1620 dnslookup router: the "domains" option is always processed without any
1621 widening, but the router might have qualify_single set.) Now Exim uses the
1622 cached value only when the same options are set.
1624 32. Added John Jetmore's "exipick" utility to the distribution.
1626 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
1627 than a timeout (e.g. a certificate is required, and is not provided), an
1628 Exim server now closes the connection immediately. Previously it waited for
1629 the client to close - but if the client is SSL, it seems that they each
1630 wait for each other, leading to a delay before one of them times out.
1632 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1633 maintained 0.8.x compatibility because I don't think many are using it, and
1634 it is clearly obsolete.
1636 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1639 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1640 client certificate was expired. A simple patch fixes this, though I don't
1641 understand the full logic of why the verify callback is called multiple
1644 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1645 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1646 which causes problems with some clients (such as the Certicom SSL Plus
1647 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1648 disables the coutermeasure allowing Eudora to connect."
1650 38. Exim was not checking that a write() to a log file succeeded. This could
1651 lead to Bad Things if a log got too big, in particular if it hit a file
1652 size limit. Exim now panics and dies if it cannot write to a log file, just
1653 as it does if it cannot open a log file.
1655 39. Modified OS/Makefile-Linux so that it now contains
1657 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
1659 The two -D definitions ensure that Exim is compiled with large file
1660 support, which makes it possible to handle log files that are bigger than
1663 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1664 instance) a domain was checked against a named list that involved a lookup,
1665 causing $domain_data to be set, then another domain was checked against the
1666 same list, then the first domain was re-checked, the value of $domain_data
1667 after the final check could be wrong. In particular, if the second check
1668 failed, it could be set empty. This bug probably also applied to
1671 41. The strip_trailing_dot option was not being applied to the address given
1672 with the -f command-line option.
1674 42. The code for reading a message's header from the spool was incrementing
1675 $received_count, but never initializing it. This meant that the value was
1676 incorrect (doubled) while delivering a message in the same process in which
1677 it was received. In the most common configuration of Exim, this never
1678 happens - a fresh exec is done - but it can happen when
1679 deliver_drop_privilege is set.
1681 43. When Exim logs an SMTP synchronization error - client data sent too soon -
1682 it now includes up to 150 characters of the unexpected data in the log
1685 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1686 and building data strings. The size of both of these buffers was 10 000
1687 bytes - far larger than anybody would *ever* want, thought I. Needless to
1688 say, somebody hit the limit. I have increased the maximum line length to
1689 20 000 and the maximum data length of concatenated lines to 100 000. I have
1690 also fixed two bugs, because there was no checking on these buffers. Tsk,
1691 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1692 buffer is too small.
1694 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1695 lsearch lookups. Now it does.
1697 46. When parsing a route_list item in a manualroute router, a fixed-length
1698 buffer was used for the list of hosts. I made this 1024 bytes long,
1699 thinking that nobody would ever have a list of hosts that long. Wrong.
1700 Somebody had a whole pile of complicated expansion conditions, and the
1701 string was silently truncated, leading to an expansion error. It turns out
1702 that it is easier to change to an unlimited length (owing to other changes
1703 that have happened since this code was originally written) than to build
1704 structure for giving a limitation error. The length of the item that
1705 expands into the list of hosts is now unlimited.
1707 47. The lsearch lookup could not handle data where the length of text line was
1708 more than 4095 characters. Such lines were truncated, leading to shortened
1709 data being returned. It should now handle lines of any length.
1711 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1712 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1715 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
1716 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1717 no longer happens in comment lines. A list of replacements is now placed
1718 at the head of all of the source files, except those whose only change is
1719 to replace PERL_COMMAND in the very first #! line.
1721 50. Replaced the slow insertion sort in queue.c, for sorting the list of
1722 messages on the queue, with a bottom-up merge sort, using code contributed
1723 by Michael Haardt. This should make operations like -bp somewhat faster on
1724 large queues. It won't affect queue runners, except when queue_run_in_order
1727 51. Installed eximstats 1.31 in the distribution.
1729 52. Added support for SRV lookups to the dnslookup router.
1731 53. If an ACL referred to $message_body or $message_body_end, the value was not
1732 reset for any messages that followed in the same SMTP session.
1734 54. The store-handling optimization for building very long strings was not
1735 differentiating between the different store pools. I don't think this
1736 actually made any difference in practice, but I've tidied it.
1738 55. While running the routers to verify a sender address, $sender_address
1739 was still set to the sender address. This is wrong, because when routing to
1740 send a bounce to the sender, it would be empty. Therefore, I have changed
1741 it so that, while verifying a sender address, $sender_address is set to <>.
1742 (There is no change to what happens when verifying a recipient address.)
1744 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1745 target A or AAAA records (if not already returned) without resetting the
1746 qualify_single or search_parents options of the DNS resolver. These are
1747 inappropriate in this case because the targets of MX and SRV records must
1748 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1749 target that, when qualified, matched something in the local domain. These
1750 two options are now turned off when doing these lookups.
1752 57. It seems that at least some releases of Reiserfs (which does not have the
1753 concept of a fixed number of inodes) returns zero and not -1 for the
1754 number of available inodes. This interacted badly with check_spool_inodes,
1755 which assumed that -1 was the "no such thing" setting. What I have done is
1756 to check that the total number of inodes is greater than zero before doing
1757 the test of how many are available.
1759 58. When a "warn" ACL statement has a log_message modifier, the message is
1760 remembered, and not repeated. This is to avoid a lot of repetition when a
1761 message has many recipients that cause the same warning to be written.
1762 Howewer, Exim was preserving the list of already written lines for an
1763 entire SMTP session, which doesn't seem right. The memory is now reset if a
1764 new message is started.
1766 59. The "rewrite" debugging flag was not showing the result of rewriting in the
1767 debugging output unless log_rewrite was also set.
1769 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1770 of (int)(handle) when we know that handle contains (void *)(-1).
1772 61. The Exim daemon panic-logs an error return when it closes the incoming
1773 connection. However "connection reset by peer" seems to be common, and
1774 isn't really an error worthy of noting specially, so that particular error
1777 62. When Exim is trying to find all the local interfaces, it used to panic and
1778 die if the ioctl to get the interface flags failed. However, it seems that
1779 on at least one OS (Solaris 9) it is possible to have an interface that is
1780 included in the list of interfaces, but for which you get a failure error
1781 for this call. This happens when the interface is not "plumbed" into a
1782 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1783 failure of the "get flags" call assumes that the interface is down.
1785 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
1786 makes life easier for people who are doing arithmetic on fields extracted
1787 from dates, where you often get leading zeros that should not be
1788 interpreted as octal.
1790 64. Added qualify_domain to the redirect router, to override the global
1793 65. If a pathologically long header line contained very many addresses (the
1794 report of this problem mentioned 10 000) and each of them was rewritten,
1795 Exim could use up a very large amount of memory. (It kept on making new
1796 copies of the header line as it rewrote, and never released the old ones.)
1797 At the expense of a bit more processing, the header rewriting function has
1798 been changed so that it no longer eats memory in this way.
1800 66. The generation of the Received: header has been moved from the time that a
1801 message starts to be received, to the time that it finishes. The timestamp
1802 in the Received: header should now be very close to that of the <= log
1803 line. There are two side-effects of this change:
1805 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1806 logged header lines no longer include the local Received: line, because
1807 it has not yet been created. The same applies to a copy of the message
1808 that is returned to a non-SMTP sender when a message is rejected.
1810 (b) When a filter file is tested using -bf, no additional Received: header
1811 is added to the test message. After some thought, I decided that this
1814 This change does not affect the value of $received_for. It is still set
1815 after address rewriting, but before local_scan() is called.
1817 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
1819 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1820 gave an unhelpful panic error message, and a defer error. I have managed to
1821 change this behaviour so that it now rejects any supplied certificate,
1822 which seems right, as the list of acceptable certificates is empty.
1824 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1825 gave an unhelpful defer error. I have not managed to make this reject any
1826 supplied certificates, but the error message it gives is "no certificate
1827 supplied", which is not helpful.
1829 70. exigrep's output now also includes lines that are not associated with any
1830 message, but which match the given pattern. Implemented by a patch from
1831 Martin Sluka, which also tidied up the Perl a bit.
1833 71. Recipient callout verification, like sender verification, was using <> in
1834 the MAIL FROM command. This isn't really the right thing, since the actual
1835 sender may affect whether the remote host accepts the recipient or not. I
1836 have changed it to use the actual sender in the callout; this means that
1837 the cache record is now keyed on a recipient/sender pair, not just the
1838 recipient address. There doesn't seem to be a real danger of callout loops,
1839 since a callout by the remote host to check the sender would use <>.
1840 [SEE ABOVE: changed after hitting problems.]
1842 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1843 temporary errors. However, in the case of such a code being given after
1844 the end of a data transmission (i.e. after ".") Exim was failing to write
1845 a retry record for the message. (Yes, there was some broken host that was
1846 actually sending 8xx at this point.)
1848 73. An unknown lookup type in a host list could cause Exim to panic-die when
1849 the list was checked. (An example that provoked this was putting <; in the
1850 middle of a list instead of at the start.) If this happened during a DATA
1851 ACL check, a -D file could be left lying around. This kind of configuration
1852 error no longer causes Exim to die; instead it causes a defer errror. The
1853 incident is still logged to the main and panic logs.
1855 74. Buglet left over from Exim 3 conversion. The message "too many messages
1856 in one connection" was written to the rejectlog but not the mainlog, except
1857 when address rewriting (yes!) was being logged.
1859 75. Added write_rejectlog option.
1861 76. When a system filter was run not as root (that is, when system_filter_user
1862 was set), the values of the $n variables were not being returned to the
1863 main process; thus, they were not subsequently available in the $sn
1866 77. Added +return_path_on_delivery log selector.
1868 78. A connection timeout was being treated differently from recipients deferred
1869 when testing hosts_max_try with a message that was older than the host's
1870 retry timeout. (The host should not be counted, thus allowing all hosts to
1871 be tried at least once before bouncing.) This may have been the cause of an
1872 occasionally reported bug whereby a message would remain on the queue
1873 longer than the retry timeout, but would be bounced if a delivery was
1874 forced. I say "may" because I never totally pinned down the problem;
1875 setting up timeout/retry tests is difficult. See also the next item.
1877 79. The ultimate address timeout was not being applied to errors that involved
1878 a combination of host plus message (for example, a timeout on a MAIL
1879 command). When an address resolved to a number of possible hosts, and they
1880 were not all tried for each delivery (e.g. because of hosts_max_try), a
1881 message could remain on the queue longer than the retry timeout.
1883 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1886 81. Fixed an obscure SMTP outgoing bug which required at least the following
1887 conditions: (a) there was another message waiting for the same server;
1888 (b) the server returned 5xx to all RCPT commands in the first message so
1889 that the message was not completed; (c) the server dropped the connection
1890 or gave a negative response to the RSET that Exim sends to abort the
1891 transaction. The observed case was a dropped connection after DATA that had
1892 been sent in pipelining mode. That is, the server had advertised PIPELINING
1893 but was not implementing it correctly. The effect of the bug was incorrect
1894 behaviour, such as trying another host, and this could lead to a crash.
1900 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1901 and daemon.c were passed as pointers to ints; they should have been
1902 pointers to socklen_t variables (which are typically unsigned ints).
1904 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1907 3. Fixed a really odd bug that affected only the testing scheme; patching a
1908 certain fixed string in the binary changed the value of another string that
1909 happened to be identical to the end of the original first string.
1911 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1912 name", it returns that address as the IP address. On some operating
1913 systems (e.g. Solaris), it also passes back the IP address string as the
1914 "host name". However, on others (e.g. Linux), it passes back an empty
1915 string. Exim wasn't checking for this, and was changing the host name to an
1916 empty string, assuming it had been canonicized.
1918 5. Although rare, it is permitted to have more than one PTR record for a given
1919 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1920 all the names associated with an address, because they do in Solaris.
1921 However, it seems that they do not in Linux for data that comes from the
1922 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1923 I found this out when I moved to a new Linux workstation and tried to run
1924 the Exim test suite.
1926 To get round this problem I have changed the code so that it now does its
1927 own call to the DNS to look up PTR records when searching for a host name.
1928 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1929 addresses that are only in /etc/hosts are still found.
1931 This behaviour is, however, controlled by an option called host_lookup_
1932 order, which defaults to "bydns:byaddr". If people want to use the other
1933 order, or indeed, just use one or the other means of lookup, they can
1934 specify it in this variable.
1936 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1937 some operating systems, this comes back from gethostbyaddr() as an empty
1938 string, and this is what Exim used to test for. However, it seems that in
1939 other systems, "." is yielded. Exim now tests for this case too.
1941 7. The values of check_spool_space and check_log_space are now held internally
1942 as a number of kilobytes instead of an absolute number of bytes. If a
1943 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1944 kilobyte. This means that much larger values can be stored.
1946 8. Exim monitor: an attempt to get the action menu when not actually pointing
1947 at a message produces an empty menu entitled "No message selected". This
1948 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1949 no entries in it ("Shell widget menu has zero width and/or height"). So I
1950 have added a single, blank menu entry in this case.
1952 9. Added ${quote_local_part.
1954 10. MIME decoding is now applied to the contents of Subject: header lines when
1957 11. Now that a reference to $sender_host_address automatically causes a reverse
1958 lookup to occur if necessary (4.13/18), there is no need to arrange for a
1959 host lookup before query-style lookups in lists that might use this
1960 variable. This has therefore been abolished, and the "net-" prefix is no
1961 longer necessary for query-style lookups.
1963 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
1964 have been a typo for LFLAGS, so it has been changed.
1966 13. The install script calls Exim with "-C /dev/null" in order to find the
1967 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
1968 to be output. Howeve, since Exim outputs its version number before the
1969 error, it didn't break the script. It just looked ugly. I fixed this by
1970 always allowing "-C /dev/null" if the caller is root.
1972 14. Ignore overlarge ACL variable number when reading spool file - insurance
1973 against a later release with more variables having written the file.
1975 15. The standard form for an IPv6 address literal was being rejected by EHLO.
1976 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1977 this, as well as the form without the "IPv6" on the front.
1979 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
1980 OS/Makefile-Darwin file.
1982 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
1983 only to LDAP libraries that do not have LDAP_OPT_DEREF.
1985 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
1986 variable. However, some OS use ints for inodes. I've added cast to long int
1987 to get rid of the compiler warning.
1989 19. I had forgotten to lock out "/../" in configuration file names when
1990 ALT_CONFIG_PREFIX was set.
1992 20. Routers used for verification do not need to specify transports. However,
1993 if such a router generated a host list, and callout was configured, Exim
1994 crashed, because it could not find a port number from the (non-existent)
1995 transport. It now assumes port 25 in this circumstance.
1997 21. Added the -t option to exigrep.
1999 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
2000 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
2001 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
2002 them is set, LOOKUP_LSEARCH is forced.
2004 23. "exim -bV" now outputs a list of lookups that are included in the binary.
2006 24. Added sender and host information to the "rejected by local_scan()" log
2007 line; previously there was no indication of these.
2009 25. Added .include_if_exists.
2011 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
2012 Linux. It turns out that not all file systems support this. Apparently some
2013 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
2014 do it.) To cope with this, the error EINVAL, which means that sync-ing is
2015 not supported on the file descriptor, is now ignored when Exim is trying to
2016 sync a directory. This applies only to Linux.
2018 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
2020 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
2021 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
2024 29. Added support for maildirsize files from supplied patch (modified a bit).
2026 30. The use of :fail: followed by an empty string could lead Exim to respond to
2027 sender verification failures with (e.g.):
2029 550 Verification failed for <xxx>
2030 550 Sender verify failed
2032 where the first response line was missing the '-' that indicates it is not
2033 the final line of the response.
2035 31. The loop for finding the name of the user that called Exim had a hardwired
2036 limit of 10; it now uses the value of finduser_retries, which is used for
2037 all other user lookups.
2039 32. Added $received_count variable, available in data and not_smtp ACLs, and at
2042 33. Exim was neglecting to zero errno before one call of strtol() when
2043 expanding a string and expecting an integer value. On some systems this
2044 resulted in spurious "integer overflow" errors. Also, it was casting the
2045 result into an int without checking.
2047 34. Testing for a connection timeout using "timeout_connect" in the retry rules
2048 did not work. The code looks as if it has *never* worked, though it appears
2049 to have been documented since at least releast 1.62. I have made it work.
2051 35. The "timeout_DNS" error in retry rules, also documented since at least
2052 1.62, also never worked. As it isn't clear exactly what this means, and
2053 clearly it isn't a major issue, I have abolished the feature by treating it
2054 as "timeout", and writing a warning to the main and panic logs.
2056 36. The display of retry rules for -brt wasn't always showing the error code
2059 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
2060 timeout_connect_A, timeout_connect_MX.
2062 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
2063 to the empty sender.
2065 39. The daemon was not analysing the content of -oX till after it had closed
2066 stderr and disconnected from the controlling terminal. This meant that any
2067 syntax errors were only noted on the panic log, and the return code from
2068 the command was 0. By re-arranging the code a little, I've made the
2069 decoding happen first, so such errors now appear on stderr, and the return
2070 code is 1. However, the actual setting up of the sockets still happens in
2071 the disconnected process, so errors there are still only recorded on the
2074 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
2075 connections (as happens on some IP stacks) was logged at start up time as
2076 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
2077 it from "IPv6 and IPv4", which means that two separate sockets are being
2080 41. The debug output for gethostbyname2() or getipnodebyname() failures now
2081 says whether AF_INET or AF_INET6 was passed as an argument.
2083 42. Exiwhat output was messed up when time zones were included in log
2086 43. Exiwhat now gives more information about the daemon's listening ports,
2087 and whether -tls-on-connect was used.
2089 44. The "port" option of the smtp transport is now expanded.
2091 45. A "message" modifier in a "warn" statement in a non-message ACL was being
2092 silently ignored. Now an error message is written to the main and panic
2095 46. There's a new ACL modifier called "logwrite" which writes to a log file
2096 as soon as it is encountered.
2098 47. Added $local_user_uid and $local_user_gid at routing time.
2100 48. Exim crashed when trying to verify a sender address that was being
2103 49. Exim was recognizing only a space character after ".include". It now also
2104 recognizes a tab character.
2106 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
2107 extracting the relevant information from the specification. The man page no
2108 longer contains scrambled data for the -d option, and I've added a section
2109 at the front about calling Exim under different names.
2111 51. Added "extra_headers" argument to the "mail" command in filter files.
2113 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
2116 53. Installed eximstats 1.29.
2118 54. Added transport_filter_timeout as a generic transport option.
2120 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
2121 Cc: header lines. This was required by RFC 822, but it not required by RFC
2124 56. Exim used to add From:, Date:, and Message-Id: header lines to any
2125 incoming messages that did not have them. Now it does so only if the
2126 message originates locally, that is, if there is no associated remote host
2127 address. When Resent- header lines are present, this applies to the Resent-
2128 lines rather than the non-Resent- lines.
2130 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
2131 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
2133 58. Messages for configuration errors now include the name of the main
2134 configuration file - useful now that there may be more than one file in a
2135 list (.included file names were always shown).
2137 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
2138 for those rare installations that do not start the daemon as root or run it
2139 setuid root. I've cut out the call to initgroups() if the daemon is not
2142 60. The Exim user and group can now be bound into the binary as text strings
2143 that are looked up at the start of Exim's processing.
2145 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
2147 62. Added $mailstore_basename variable.
2149 63. Installed patch to sieve.c from Michael Haardt.
2151 64. When Exim failed to open the panic log after failing to open the main log,
2152 the original message it was trying to log was written to stderr and debug
2153 output, but if they were not available (the usual case in production), it
2154 was lost. Now it is written to syslog before the two lines that record the
2155 failures to open the logs.
2157 65. Users' Exim filters run in subprocesses under the user's uid. It is
2158 possible for a "deliver" command or an alias in a "personal" command to
2159 provoke an address rewrite. If logging of address rewriting is configured,
2160 this fails because the process is not running as root or exim. There may be
2161 a better way of dealing with this, but for the moment (because 4.30 needs
2162 to be released), I have disabled address rewrite logging when running a
2163 filter in a non-root, non-exim process.
2169 1. The buildconfig auxiliary program wasn't quoting the value set for
2170 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
2171 not defined. This bug was masked in 4.22 by the effect that was fixed in
2174 2. Some messages that were rejected after a message id was allocated were
2175 shown as "incomplete" by exigrep. It no longer does this for messages that
2176 are rejected by local_scan() or the DATA or non-SMTP ACLs.
2178 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
2179 have allow_domain_literals set, the ID did not get logged in the <= line.
2180 Domain literals are now always recognized in Message-ID: header lines.
2182 4. The first argument for a ${extract expansion item is the key name or field
2183 number. Leading and trailing spaces in this item were not being ignored,
2184 causing some misleading effects.
2186 5. When deliver_drop_privilege was set, single queue runner processes started
2187 manually (i.e. by the command "exim -q") or by the daemon (which uses the
2188 same command in the process it spins off) were not dropping privilege.
2190 6. When the daemon running as "exim" started a queue runner, it always
2191 re-executed Exim in the spun-off process. This is a waste of effort when
2192 deliver_drop_privilege is set. The new process now just calls the
2193 queue-runner function directly.
2199 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2202 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2203 ignored. Though the use of -oP was forcing the writing of a pid file, it
2204 was always written to the default place.
2206 3. If the message "no IP address found for host xxxx" is generated during
2207 incoming verification, it is now followed by identification of the incoming
2208 connection (so you can more easily find what provoked it).
2210 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2212 5. Added some features to "harden" Exim a bit more against certain attacks:
2214 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2215 be put in Local/Makefile. This is like the never_users runtime option,
2216 but it cannot be overridden. The default setting is "root".
2218 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2219 prefix string with which any file named in a -C command line option
2222 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2223 is retained for -C and -D only if the caller of Exim is root. Without
2224 it, the exim user may also use -C and -D and retain privilege.
2226 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2227 command line option is disabled.
2229 6. Macro names set by the -D option must start with an upper case letter, just
2230 like macro names defined in the configuration file.
2232 7. Added "dereference=" facility to LDAP.
2234 8. Two instances of the typo "uknown" in the source files are fixed.
2236 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2237 the Configure-Makefile script screwed up while processing it.
2239 10. Incorporated PCRE 4.4.
2241 11. The SMTP synchronization check was not operating right at the start of an
2242 SMTP session. For example, it could not catch a HELO sent before the client
2243 waited for the greeting. There is now a check for outstanding input at the
2244 point when the greeting is written. Because of the duplex, asynchronous
2245 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2246 way, but not yet received, when the check is performed.
2248 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2249 on TCP/IP sockets, because this apparently causes some broken clients to
2252 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2253 unchanged) from the Cygwin maintainer.
2255 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
2256 was supported instead of testing for mbx. Effectively a typo.
2258 15. The spa authenticator server code was not checking that the input it
2259 received was valid base64.
2261 16. The debug output line for the "set" modifier in ACLs was not showing the
2262 name of the variable that was being set.
2264 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
2266 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
2267 lookup on its own. Something else was needed to trigger the lookup. For
2268 example, a match in host_lookup or the need for a host name in a host list.
2269 Now, if $sender_host_name is referenced and the host name has not yet been
2270 looked up, a lookup is performed. If the lookup fails, the variable remains
2271 empty, and $host_lookup_failed is set to "1".
2273 19. Added "eqi" as a case-independent comparison operator.
2275 20. The saslauthd authentication condition could segfault if neither service
2276 nor realm was specified.
2278 21. If an overflowing value such as "2048M" was set for message_size_limit, the
2279 error message that was logged was misleading, and incoming SMTP
2280 connections were dropped. The message is now more accurate, and temporary
2281 errors are given to SMTP connections.
2283 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
2284 (except RSET) with a 421 error, until QUIT is received. However, it was
2285 failing to send a response to QUIT.
2287 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
2288 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2289 ACL is now run after the helo_try_verify_hosts code.
2291 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2292 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2293 case-independent, so other case variants are also recognized). Apparently
2294 some systems use these upper case variants.
2296 25. If more than two messages were waiting for the same host, and a transport
2297 filter was specified for the transport, Exim sent two messages over the
2298 same TCP/IP connection, and then failed with "socket operation on non-
2299 socket" when it tried to send the third.
2301 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
2303 27. The extern definition of crypt16() in expand.c was not being excluded when
2304 the OS had its own crypt16() function.
2306 28. Added bounce_return_body as a new option, and bounce_return_size_limit
2307 as a preferred synonym for return_size_limit, both as an option and as an
2310 29. Added LIBS=-liconv to OS/Makefile-OSF1.
2312 30. Changed the default configuration ACL to relax the local part checking rule
2313 for addresses that are not in any local domains. For these addresses,
2314 slashes and pipe symbols are allowed within local parts, but the sequence
2315 /../ is explicitly forbidden.
2317 31. SPA server authentication was not clearing the challenge buffer before
2320 32. log_message in a "warn" ACL statement was writing to the reject log as
2321 well as to the main log, which contradicts the documentation and doesn't
2322 seem right (because no rejection is happening). So I have stopped it.
2324 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2325 However, I am unable to do any testing of this.
2327 34. Fixed an infelicity in the appendfile transport. When checking directories
2328 for a mailbox, to see if any needed to be created, it was accidentally
2329 using path names with one or more superfluous leading slashes; tracing
2330 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
2332 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2333 contents are added to the log line that is written for every discarded
2334 recipient. (Previously a log_message setting was ignored.)
2336 36. The ${quote: operator now quotes the string if it is empty.
2338 37. The install script runs exim in order to find its version number. If for
2339 some reason other than non-existence or emptiness, which it checks, it
2340 could not run './exim', it was installing it with an empty version number,
2341 i.e. as "exim-". This error state is now caught, and the installation is
2344 38. An argument was missing from the function that creates an error message
2345 when Exim fails to connect to the socket for saslauthd authentication.
2346 This could cause Exim to crash, or give a corrupted message.
2348 39. Added isip, isip4, and isip6 to ${if conditions.
2350 40. The ACL variables $acl_xx are now saved with the message, and can be
2351 accessed later in routers, transports, and filters.
2353 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
2354 strings in the file are not string-expanded.
2356 42. If a MAIL command specified a SIZE value that was too large to fit into an
2357 int variable, the check against message_size_limit failed. Such values are
2358 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2359 day this will have to be increased, but I don't think I want to be around
2360 when emails are that large.
2367 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2368 iconv() is not standard in FreeBSD.
2370 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2371 IPv6 enabled. The observed symptom was a segmentation fault on return from
2372 the function os_common_find_running_interfaces() in src/os.c.
2374 3. In the check_special_case() function in daemon.c I had used "errno" as an
2375 argument name, which causes warnings on some systems. This was basically a
2376 typo, since it was named "eno" in the comments!
2378 4. The code that waits for the clock to tick (at a resolution of some fraction
2379 of a second) so as to ensure message-id uniqueness was always waiting for
2380 at least one whole tick, when it could have waited for less. [This is
2381 almost certainly not relevant at current processor speeds, where it is
2382 unlikely to ever wait at all. But we try to future-proof.]
2384 5. The function that sleeps for a time interval that includes fractions of a
2385 second contained a race. It did not block SIGALRM between setting the
2386 timer, and suspending (a couple of lines later). If the interval was short
2387 and the sigsuspend() was delayed until after it had expired, the suspension
2388 never ended. On busy systems this could lead to processes getting stuck for
2391 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2392 process, before it forks any delivery processes. The open lookup caching
2393 mechanism meant that the open file or database connection was passed into
2394 the delivery process. The problem was that delivery processes always tidy
2395 up cached lookup data. This could cause a problem for the next delivery
2396 process started by the queue runner, because the external queue runner
2397 process does not know about the closure. So the next delivery process
2398 still has data in the lookup cache. In the case of a file lookup, there was
2399 no problem because closing a file descriptor in a subprocess doesn't affect
2400 the parent. However, if the lookup was caching a connection to a database,
2401 the connection was closed, and the second delivery process was likely to
2402 see errors such as "PGSQL: query failed: server closed the connection
2403 unexpectedly". The problem has been fixed by closing all cached lookups
2404 in a queue runner before running a delivery process.
2406 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2407 seem to have the "const" qualifier which it has on other OS. I've
2410 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2411 *of the same type* (client or server) with the same public name that an
2412 error should be diagnosed.
2414 9. When Exim looked up a host name for an IP address, but failed to find the
2415 original IP address when looking up the host name (a safety check), it
2416 output the message "<ip address> does not match any IP for NULL", which was
2417 confusing, to say the least. The bug was that the host name should have
2418 appeared instead of "NULL".
2420 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
2421 user that is built into the binary, and the -C or -D options is used, root
2422 privilege is dropped before the configuration file is read. In addition,
2423 logging is switched to stderr instead of the normal log files. If the
2424 configuration then re-defines the Exim user, the unprivileged environment
2425 is probably not what is expected, so Exim logs a panic warning message (but
2428 However, if deliver_drop_privilege is set, the unprivileged state may well
2429 be exactly what is intended, so the warning has been cut out in that case,
2430 and Exim is allowed to try to write to its normal log files.
2436 1. smtp_return_error_details was not giving details for temporary sender
2437 or receiver verification errors.
2439 2. Diagnose a configuration error if two authenticators have the same public
2442 3. Exim used not to create the message log file for a message until the first
2443 delivery attempt. This could be confusing when incoming messages were held
2444 for policy or load reasons. The message log file is now created at the time
2445 the message is received, and an initial "Received" line is written to it.
2447 4. The automatically generated man page for command line options had a minor
2448 bug that caused no ill effects; however, a more serious problem was that
2449 the procedure for building the man page automatically didn't always
2450 operate. Consequently, release 4.20 contains an out-of-date version. This
2451 shouldn't happen again.
2453 5. When building Exim with embedded Perl support, the script that builds the
2454 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2455 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2457 6. The freeze_tell option was not being used for messages that were frozen on
2458 arrival, either by an ACL or by local_scan().
2460 7. Added the smtp_incomplete_transaction log selector.
2462 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2463 was accepting AUTH without a new EHLO.
2465 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2466 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2469 10. Logging of TCP/IP connections (when configured) now happens in the main
2470 daemon process instead of the child process, so that the TCP/IP connection
2471 count is more accurate (but it can never be perfect).
2473 11. The use of "drop" in a nested ACL was not being handled correctly in the
2474 outer ACL. Now, if condition failure induced by the nested "drop" causes
2475 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2476 or "require"), the connection is dropped.
2478 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2479 that yield "discard" can now be used with an "accept" or a "discard" verb,
2480 but an error is generated for any others (because I can't see a useful way
2481 to define what should happen).
2483 13. When an ACL is read dynamically from a file (or anywhere else), the lines
2484 are now processed in the same way as lines in the Exim configuration file.
2485 In particular, continuation lines are supported.
2487 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
2489 15. Added -ti meaning -t -i.
2491 16. Check for letters, digits, hyphens, and dots in the names of dnslist
2492 domains, and warn by logging if others are found.
2494 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
2495 returned from GIFCONF when Exim is trying to find the list of interfaces on
2496 a host. The code in os.c has been modified to copy each ifreq to an aligned
2497 structure in all cases.
2499 Also, in some cases, the returned ifreq's were being copied to a 'struct
2500 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2501 means the last couple of bytes of an IPv6 address could be chopped if the
2502 ifreq contained only a normal sockaddr (14 bytes storage).
2504 18. Named domain lists were not supported in the hosts_treat_as_local option.
2505 An entry such as +xxxx was not recognized, and was treated as a literal
2508 19. Ensure that header lines added by a DATA ACL are included in the reject log
2509 if the ACL subsequently rejects the message.
2511 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
2512 MD5 (which is deprecated).
2514 21. When testing a filter file using -bf, Exim was writing a message when it
2515 took the sender from a "From " line in the message, but it was not doing so
2516 when it took $return_path from a Return-Path: header line. It now does.
2518 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2519 with a valid header line field name (a series of printing characters
2520 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
2522 23. Changed "disc" in the source to "disk" to conform to the documentation and
2523 the book and for uniformity.
2525 24. Ignore Sendmail's -Ooption=value command line item.
2527 25. When execve() failed while trying to run a command in a pipe transport,
2528 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2529 could be confused with a return value of 69 from the command itself. This
2530 has been changed to 127, the value the shell returns if it is asked to run
2531 a non-existent command. The wording for the related log line suggests a
2532 non-existent command as the problem.
2534 26. If received_header_text expands to an empty string, do not add a Received:
2535 header line to the message. (Well, it adds a token one on the spool, but
2536 marks it "old" so that it doesn't get used or transmitted.)
2538 27. Installed eximstats 1.28 (addition of -nt option).
2540 28. There was no check for failure on the call to getsockname() in the daemon
2541 code. This can fail if there is a shortage of resources on the system, with
2542 ENOMEM, for example. A temporary error is now given on failure.
2544 29. Contrary to the C standard, it seems that in some environments, the
2545 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2546 program. Exim now does this explicitly; it affects the formatting of
2547 timestamps using strftime().
2549 30. If exiqsumm was given junk data, it threw up some uninitialized variable
2550 complaints. I've now initialized all the variables, to avoid this.
2552 32. Header lines added by a system filter were not being "seen" during
2553 transport-time rewrites.
2555 33. The info_callback() function passed to OpenSSL is set up with type void
2556 (*)(SSL *, int, int), as described somewhere. However, when calling the
2557 function (actually a macro) that sets it up, the type void(*)() is
2558 expected. I've put in a cast to prevent warnings from picky compilers.
2560 34. If a DNS black list lookup found a CNAME record, but there were no A
2561 records associated with the domain it pointed at, Exim crashed.
2563 35. If a DNS black list lookup returned more than one A record, Exim ignored
2564 all but the first. It now scans all returned addresses if a particular IP
2565 value is being sought. In this situation, the contents of the
2566 $dnslist_value variable are a list of all the addresses, separated by a
2569 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
2570 to accept a host name and all its aliases if the forward lookup for any of
2571 them yielded the IP address of the incoming connection. Now it accepts only
2572 those names whose forward lookup yields the correct IP address. Any other
2573 names are discarded. This closes a loophole whereby a rogue DNS
2574 administrator could create reverse DNS records to break through a
2575 wildcarded host restriction in an ACL.
2577 37. If a user filter or a system filter that ran in a subprocess used any of
2578 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2579 the wrong values were passed to the pipe command ($thisaddress had the
2580 value of $0, $0 had the value of $1, etc). This bug was introduced by
2581 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
2583 38. Improved the line breaking for long SMTP error messages from ACLs.
2584 Previously, if there was no break point between 40 and 75 characters, Exim
2585 left the rest of the message alone. Two changes have been made: (a) I've
2586 reduced the minimum length to 35 characters; (b) if it can't find a break
2587 point between 35 and 75 characters, it looks ahead and uses the first one
2588 that it finds. This may give the occasional overlong line, but at least the
2589 remaining text gets split now.
2591 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2592 file descriptors might be low, and that setting 1000 would always raise it.
2593 It turns out that in some environments, the limit is already over 1000 and
2594 that lowering it causes trouble. So now Exim takes care not to decrease it.
2596 40. When delivering a message, the value of $return_path is set to $sender_
2597 address at the start of routing (routers may change the value). By an
2598 oversight, this default was not being set up when an address was tested by
2599 -bt or -bv, which affected the outcome if any router or filter referred to
2602 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
2603 log only when "message" or "log_message" are set. However, if one of the
2604 conditions was an address verification, or a call to a nested ACL, the
2605 messages generated by the underlying test were being passed through. This
2606 no longer happens. The underlying message is available in $acl_verify_
2607 message for both "message" and "log_message" expansions, so it can be
2608 passed through if needed.
2610 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2611 new expansion $bh_ to give the encoded byte string without charset
2612 translation. Translation happens only if iconv() is available; HAVE_ICONV
2613 indicates this at build time. HEADERS_CHARSET gives the charset to
2614 translate to; headers_charset can change it in the configuration, and
2615 "headers charset" can change it in an individual filter file.
2617 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
2618 that creates RFC 2047 encoded "words" labels them as that charset instead
2619 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2620 expansion operator; (ii) when Exim creates a From: line for a local
2621 message; (iii) when a header line is rewritten to include a "phrase" part.
2623 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2624 buggy, causing it to skip the first lines of messages whose message ID
2625 ended in 'D'. This would not have bitten before Exim release 4.14, because
2626 message IDs were unlikely to end in 'D' before then. The effect was to have
2627 incorrect size information for certain domains.
2629 45. #include "config.h" was missing at the start of the crypt16.c module. This
2630 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2633 46. If there was a timeout during a "random" callout check, Exim treated it as
2634 a failure of the random address, and carried on sending RSET and the real
2635 address. If the delay was just some slowness somewhere, the response to the
2636 original RCPT would be taken as a response to RSET and so on, causing
2637 mayhem of various kinds.
2639 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2640 when I implemented it. It didn't allow for the fact that some option values
2641 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2642 the right test for positive values.
2644 48. Domain names in DNS records are case-independent. Exim always looks them up
2645 in lower case. Some resolvers return domain names in exactly the case they
2646 appear in the zone file, that is, they may contain uppercase letters. Not
2647 all resolvers do this - some return always lower case. Exim was treating a
2648 change of case by a resolver as a change of domain, similar to a widening
2649 of a domain abbreviation. This triggered its re-routing code and so it was
2650 trying to route what was effectively the same domain again. This normally
2651 caused routing to fail (because the router wouldn't handle the domain
2652 twice). Now Exim checks for this case specially, and just changes the
2653 casing of the domain that it ultimately uses when it transmits the message
2656 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2659 50. If a filter generated a file delivery with a non-absolute name (possible if
2660 no home directory exists for the router), the forbid_file option was not
2663 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
2664 the existing equality matching.
2666 52. Exim was using ints instead of ino_t variables in some places where it was
2667 dealing with inode numbers.
2669 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2670 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2671 called TMPDIR, and if it finds it is different, it changes its value.
2673 54. The smtp_printf() function is now made available to local_scan() so
2674 additional output lines can be written before returning. There is also an
2675 smtp_fflush() function to enable the detection of a dropped connection.
2676 The variables smtp_input and smtp_batched_input are exported to
2679 55. Changed the default runtime configuration: the message "Unknown user"
2680 has been removed from the ACL, and instead placed on the localuser router,
2681 using the cannot_route_message feature. This means that any verification
2682 failures that generate their own messages won't get overridden. Similarly,
2683 the "Unrouteable address" message that was in the ACL for unverifiable
2684 relay addresses has also been removed.
2686 56. Added hosts_avoid_esmtp to the smtp transport.
2688 57. The exicyclog script was not checking for the esoteric option
2689 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2690 will work only if exicyclog is run under the appropriate euid.
2692 58. Following a discussion on the list, the rules by which Exim recognises line
2693 endings on incoming messages have been changed. The -dropcr and drop_cr
2694 options are now no-ops, retained only for backwards compatibility. The
2695 following line terminators are recognized: LF CRLF CR. However, special
2696 processing applies to CR:
2698 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2699 nor a local message in the state where . is a terminator.
2701 (ii) If a bare CR is encountered in a header line, an extra space is added
2702 after the line terminator so as not to end the header. The reasoning
2703 behind this is that bare CRs in header lines are most likely either
2704 to be mistakes, or people trying to play silly games.
2706 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
2707 was being incorrectly given as 18 bytes larger than it should have been.
2708 This is a VOB (very old bug).
2710 60. This may never have affected anything current, but just in case it has:
2711 When the local host is found other than at the start of a list of hosts,
2712 the local host, those with the same MX, and any that follow, are discarded.
2713 When the list in question was part of a longer list of hosts, the following
2714 hosts (not currently being processed) were also being discarded. This no
2715 longer happens. I'm not sure if this situation could ever has previously
2718 61. Added the "/MX" feature to lists of hosts in the manualroute and query
2721 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2722 header. This is something that is recommended in a new Internet Draft, and
2723 is something that is documented as being done by Sendmail. There are two
2724 possible values. For messages generated by the autoreply transport, Exim
2727 Auto-Submitted: auto-replied
2729 whereas for all other generated messages (e.g. bounces) it adds
2731 Auto-Submitted: auto-generated
2733 63. The "personal" condition in filters now includes a test for the
2734 Auto-Submitted: header. If it contains the string "auto-" the message it
2735 not considered personal.
2737 64. Added rcpt_include_affixes as a generic transport option.
2739 65. Added queue_only_override (default true).
2741 66. Added the syslog_duplication option.
2743 67. If what should have been the first header line of a message consisted of
2744 a space followed by a colon, Exim was mis-interpreting it as a header line.
2745 It isn't of course - it is syntactically invalid and should therefore be
2746 treated as the start of the message body. The misbehaviour could have
2747 caused a number of strange effects, including loss of data in subsequent
2748 header lines, and spool format errors.
2750 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2751 client host had authenticated. This control can now be exercised by an ACL
2752 for more flexibility.
2754 69. By default, callouts do not happen when testing with -bh. There is now a
2755 variant, -bhc, which does actually run the callout code, including
2756 consulting and updating the callout cache.
2758 70. Added support for saslauthd authentication, courtesy of Alexander
2761 71. If statvfs() failed on the spool or log directories while checking their
2762 size for availability, Exim confusingly gave the error "space shortage".
2763 Furthermore, in debugging mode it crashed with a floating point exception.
2764 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2765 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2766 serious problem, Exim now writes to the main and panic logs when this
2767 happens, with details of the failure. It then refuses to accept the
2768 incoming message, giving the message "spool directory problem" or "log
2769 directory problem" with a 421 code for SMTP messages.
2771 72. When Exim is about to re-exec itself, it ensures that the file descriptors
2772 0, 1, and 2 exist, because some OS complain for execs without them (see
2773 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2774 descriptors. However, the code omitted to check that the open succeeded,
2775 causing mysterious errors if for some reason the permissions on /dev/null
2776 got screwed. Now Exim writes a message to the main and panic logs, and
2777 bombs out if it can't open /dev/null.
2779 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2780 interact so that it is all more flexible. It is supposed to remain
2781 backwards compatible. Also added extra_local_interfaces.
2783 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2784 to bomb out with an assertion failure - to the client this appears as a
2785 connection drop. This problem occurs in the part of the code that was taken
2786 from the Samba project. Fortunately, the assertion is in a very simple
2787 function, so I have fixed this by reproducing the function inline in the
2788 one place where it is called, and arranging for authentication to fail
2789 instead of killing the process with assert().
2791 75. The SPA client code was not working when the server requested OEM rather
2792 than Unicode encoding.
2794 76. Added code to make require_files with a specific uid setting more usable in
2795 the case where statting the file as root fails - usually a non-root-mounted
2796 NFS file system. When this happens and the failure is EACCES, Exim now
2797 forks a subprocess and does the per-uid checking as the relevant uid.
2799 77. Added process_log_path.
2801 78. If log_file_path was not explicitly set, a setting of check_log_space or
2802 check_log_inodes was ignored.
2804 79. If a space check for the spool or log partitions fails, the incident is now
2805 logged. Of course, in the latter case the data may get lost...
2807 80. Added the %p formatting code to string_format() so that it can be used to
2808 print addresses in debug_print(). Adjusted all the address printing in the
2809 debugging in store.c to use %p rather than %d.
2811 81. There was a concern that a line of code in smtp_in.c could overflow a
2812 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2813 initially expressed, the concern was not well-founded, because trailing
2814 spaces are removed early. However, if the trailing spaces were followed by
2815 a NULL, they did not get removed, so the overflow was possible. Two fixes
2818 (a) I re-wrote the offending code in a cleaner fashion.
2819 (b) If an incoming SMTP command contains a NULL character, it is rejected
2822 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
2823 runs initgroups(), so that if the Exim user is in any additional groups,
2824 they will be used during message reception.
2830 The change log for 4.20 and earlier releases has been archived.
git://git.exim.org / users / heiko / exim.git / blob