1 Change log file for Exim from version 4.21
2 -------------------------------------------
7 PP/01 SECURITY: protect DKIM DNS decoding from remote exploit.
9 This, or similar/improved, will also be change PP/11 of 4.81.
15 PP/01 Handle short writes when writing local log-files.
16 In practice, only affects FreeBSD (8 onwards).
17 Bugzilla 1053, with thanks to Dmitry Isaikin.
19 NM/01 Bugzilla 949 - Documentation tweak
21 NM/02 Bugzilla 1093 - eximstats DATA reject detection regexps
24 NM/03 Bugzilla 1169 - primary_hostname spelling was incorrect in docs.
26 PP/02 Implemented gsasl authenticator.
28 PP/03 Implemented heimdal_gssapi authenticator with "server_keytab" option.
30 PP/04 Local/Makefile support for (AUTH|LOOKUP)_*_PC=foo to use
31 `pkg-config foo` for cflags/libs.
33 PP/05 Swapped $auth1/$auth2 for gsasl GSSAPI mechanism, to be more consistent
34 with rest of GSASL and with heimdal_gssapi.
36 PP/06 Local/Makefile support for USE_(GNUTLS|OPENSSL)_PC=foo to use
37 `pkg-config foo` for cflags/libs for the TLS implementation.
39 PP/07 New expansion variable $tls_bits; Cyrus SASL server connection
40 properties get this fed in as external SSF. A number of robustness
41 and debugging improvements to the cyrus_sasl authenticator.
43 PP/08 cyrus_sasl server now expands the server_realm option.
45 PP/09 Bugzilla 1214 - Log authentication information in reject log.
46 Patch by Jeremy Harris.
48 PP/10 Added dbmjz lookup type.
50 PP/11 Let heimdal_gssapi authenticator take a SASL message without an authzid.
52 PP/12 MAIL args handles TAB as well as SP, for better interop with
53 non-compliant senders.
54 Analysis and variant patch by Todd Lyons.
56 NM/04 Bugzilla 1237 - fix cases where printf format usage not indicated
57 Bug report from Lars Müller <lars@samba.org> (via SUSE),
58 Patch from Dirk Mueller <dmueller@suse.com>
60 PP/13 tls_peerdn now print-escaped for spool files.
61 Observed some $tls_peerdn in wild which contained \n, which resulted
62 in spool file corruption.
64 PP/14 TLS fixes for OpenSSL: support TLS 1.1 & 1.2; new "openssl_options"
65 values; set SSL_MODE_AUTO_RETRY so that OpenSSL will retry a read
66 or write after TLS renegotiation, which otherwise led to messages
69 TK/01 Bugzilla 1239 - fix DKIM verification when signature was not inserted
70 as a tracking header (ie: a signed header comes before the signature).
71 Patch from Wolfgang Breyha.
73 JH/01 Bugzilla 660 - Multi-valued attributes from ldap now parseable as a
74 comma-sep list; embedded commas doubled.
76 JH/02 Refactored ACL "verify =" logic to table-driven dispatch.
78 PP/15 LDAP: Check for errors of TLS initialisation, to give correct
80 Report and patch from Dmitry Banschikov.
82 PP/16 Removed "dont_insert_empty_fragments" fron "openssl_options".
83 Removed SSL_clear() after SSL_new() which led to protocol negotiation
84 failures. We appear to now support TLS1.1+ with Exim.
86 PP/17 OpenSSL: new expansion var $tls_sni, which if used in tls_certificate
87 lets Exim select keys and certificates based upon TLS SNI from client.
88 Also option tls_sni on SMTP Transports. Also clear $tls_bits correctly
89 before an outbound SMTP session. New log_selector, +tls_sni.
91 PP/18 Bugzilla 1122 - check localhost_number expansion for failure, avoid
92 NULL dereference. Report and patch from Alun Jones.
94 PP/19 DNS resolver init changes for NetBSD compatibility. (Risk of breakage
95 on less well tested platforms). Obviates NetBSD pkgsrc patch-ac.
96 Not seeing resolver debug output on NetBSD, but suspect this is a
97 resolver implementation change.
99 PP/20 Revert part of NM/04, it broke log_path containing %D expansions.
100 Left warnings. Added "eximon gdb" invocation mode.
102 PP/21 Defaulting "accept_8bitmime" to true, not false.
104 PP/22 Added -bw for inetd wait mode support.
106 PP/23 Added PCRE_CONFIG=yes support to Makefile for using pcre-config to
107 locate the relevant includes and libraries. Made this the default.
109 PP/24 Fixed headers_only on smtp transports (was not sending trailing dot).
110 Bugzilla 1246, report and most of solution from Tomasz Kusy.
112 JH/03 ${eval } now uses 64-bit and supports a "g" suffix (like to "k" and "m").
113 This may cause build issues on older platforms.
115 PP/25 Revamped GnuTLS support, passing tls_require_ciphers to
116 gnutls_priority_init, ignoring Exim options gnutls_require_kx,
117 gnutls_require_mac & gnutls_require_protocols (no longer supported).
118 Added SNI support via GnuTLS too.
119 Made ${randint:..} supplier available, if using not-too-old GnuTLS.
121 PP/26 Added EXPERIMENTAL_OCSP for OpenSSL.
123 PP/27 Applied dnsdb SPF support patch from Janne Snabb.
124 Applied second patch from Janne, implementing suggestion to default
125 multiple-strings-in-record handling to match SPF spec.
127 JH/04 Added expansion variable $tod_epoch_l for a higher-precision time.
129 PP/28 Fix DCC dcc_header content corruption (stack memory referenced,
130 read-only, out of scope).
131 Patch from Wolfgang Breyha, report from Stuart Northfield.
133 PP/29 Fix three issues highlighted by clang analyser static analysis.
134 Only crash-plausible issue would require the Cambridge-specific
135 iplookup router and a misconfiguration.
136 Report from Marcin Mirosław.
138 PP/30 Another attempt to deal with PCRE_PRERELEASE, this one less buggy.
140 PP/31 %D in printf continues to cause issues (-Wformat=security), so for
141 now guard some of the printf checks behind WANT_DEEPER_PRINTF_CHECKS.
142 As part of this, removing so much warning spew let me fix some minor
143 real issues in debug logging.
145 PP/32 GnuTLS was always using default tls_require_ciphers, due to a missing
146 assignment on my part. Fixed.
148 PP/33 Added tls_dh_max_bits option, defaulting to current hard-coded limit
149 of NSS, for GnuTLS/NSS interop. Problem root cause diagnosis by
150 Janne Snabb (who went above and beyond: thank you).
152 PP/34 Validate tls_require_ciphers on startup, since debugging an invalid
153 string otherwise requires a connection and a bunch more work and it's
154 relatively easy to get wrong. Should also expose TLS library linkage
157 PP/35 Pull in <features.h> on Linux, for some portability edge-cases of
158 64-bit ${eval} (JH/03).
160 PP/36 Define _GNU_SOURCE in exim.h; it's needed for some releases of
161 GNU libc to support some of the 64-bit stuff, should not lead to
162 conflicts. Defined before os.h is pulled in, so if a given platform
163 needs to override this, it can.
165 PP/37 Unbreak Cyrus SASL auth: SSF retrieval was incorrect, Exim thought
166 protection layer was required, which is not implemented.
167 Bugzilla 1254, patch from Wolfgang Breyha.
169 PP/38 Overhaul DH prime handling, supply RFC-specified DH primes as built
170 into Exim, default to IKE id 23 from RFC 5114 (2048 bit). Make
171 tls_dhparam take prime identifiers. Also unbreak combination of
172 OpenSSL+DH_params+TLSSNI.
174 PP/39 Disable SSLv2 by default in OpenSSL support.
180 PP/01 Solaris build fix for Oracle's LDAP libraries.
181 Bugzilla 1109, patch from Stephen Usher.
183 TF/01 HP/UX build fix: avoid arithmetic on a void pointer.
185 TK/01 DKIM Verification: Fix relaxed canon for empty headers w/o
188 TF/02 Fix a couple more cases where we did not log the error message
189 when unlink() failed. See also change 4.74-TF/03.
191 TF/03 Make the exiwhat support code safe for signals. Previously Exim might
192 lock up or crash if it happened to be inside a call to libc when it
193 got a SIGUSR1 from exiwhat.
195 The SIGUSR1 handler appends the current process status to the process
196 log which is later printed by exiwhat. It used to use the general
197 purpose logging code to do this, but several functions it calls are
198 not safe for signals.
200 The new output code in the SIGUSR1 handler is specific to the process
201 log, and simple enough that it's easy to inspect for signal safety.
202 Removing some special cases also simplifies the general logging code.
203 Removing the spurious timestamps from the process log simplifies
206 TF/04 Improved ratelimit ACL condition.
208 The /noupdate option has been deprecated in favour of /readonly which
209 has clearer semantics. The /leaky, /strict, and /readonly update modes
210 are mutually exclusive. The update mode is no longer included in the
211 database key; it just determines when the database is updated. (This
212 means that when you upgrde Exim will forget old rate measurements.)
214 Exim now checks that the per_* options are used with an update mode that
215 makes sense for the current ACL. For example, when Exim is processing a
216 message (e.g. acl_smtp_rcpt or acl_smtp_data, etc.) you can specify
217 per_mail/leaky or per_mail/strict; otherwise (e.g. in acl_smtp_helo) you
218 must specify per_mail/readonly. If you omit the update mode it defaults to
219 /leaky where that makes sense (as before) or /readonly where required.
221 The /noupdate option is now undocumented but still supported for
222 backwards compatibility. It is equivalent to /readonly except that in
223 ACLs where /readonly is required you may specify /leaky/noupdate or
224 /strict/noupdate which are treated the same as /readonly.
226 A useful new feature is the /count= option. This is a generalization
227 of the per_byte option, so that you can measure the throughput of other
228 aggregate values. For example, the per_byte option is now equivalent
229 to per_mail/count=${if >{0}{$message_size} {0} {$message_size} }.
231 The per_rcpt option has been generalized using the /count= mechanism
232 (though it's more complicated than the per_byte equivalence). When it is
233 used in acl_smtp_rcpt, the per_rcpt option adds recipients to the
234 measured rate one at a time; if it is used later (e.g. in acl_smtp_data)
235 or in a non-SMTP ACL it adds all the recipients in one go. (The latter
236 /count=$recipients_count behaviour used to work only in non-SMTP ACLs.)
237 Note that using per_rcpt with a non-readonly update mode in more than
238 one ACL will cause the recipients to be double-counted. (The per_mail
239 and per_byte options don't have this problem.)
241 The handling of very low rates has changed slightly. If the computed rate
242 is less than the event's count (usually one) then this event is the first
243 after a long gap. In this case the rate is set to the same as this event's
244 count, so that the first message of a spam run is counted properly.
246 The major new feature is a mechanism for counting the rate of unique
247 events. The new per_addr option counts the number of different
248 recipients that someone has sent messages to in the last time period. It
249 behaves like per_rcpt if all the recipient addresses are different, but
250 duplicate recipient addresses do not increase the measured rate. Like
251 the /count= option this is a general mechanism, so the per_addr option
252 is equivalent to per_rcpt/unique=$local_part@$domain. You can, for
253 example, measure the rate that a client uses different sender addresses
254 with the options per_mail/unique=$sender_address. There are further
255 details in the main documentation.
257 TF/05 Removed obsolete $Cambridge$ CVS revision strings.
259 TF/06 Removed a few PCRE remnants.
261 TF/07 Automatically extract Exim's version number from tags in the git
262 repository when doing development or release builds.
264 PP/02 Raise smtp_cmd_buffer_size to 16kB.
265 Bugzilla 879. Patch from Paul Fisher.
267 PP/03 Implement SSL-on-connect outbound with protocol=smtps on smtp transport.
268 Heavily based on revision 40f9a89a from Simon Arlott's tree.
271 PP/04 Use .dylib instead of .so for dynamic library loading on MacOS.
273 PP/05 Variable $av_failed, true if the AV scanner deferred.
274 Bugzilla 1078. Patch from John Horne.
276 PP/06 Stop make process more reliably on build failure.
277 Bugzilla 1087. Patch from Heiko Schlittermann.
279 PP/07 Make maildir_use_size_file an _expandable_ boolean.
280 Bugzilla 1089. Patch from Heiko Schlittermann.
282 PP/08 Handle ${run} returning more data than OS pipe buffer size.
283 Bugzilla 1131. Patch from Holger Weiß.
285 PP/09 Handle IPv6 addresses with SPF.
286 Bugzilla 860. Patch from Wolfgang Breyha.
288 PP/10 GnuTLS: support TLS 1.2 & 1.1.
290 Use gnutls_certificate_verify_peers2() [patch from Andreas Metzler].
293 PP/11 match_* no longer expand right-hand-side by default.
294 New compile-time build option, EXPAND_LISTMATCH_RHS.
295 New expansion conditions, "inlist", "inlisti".
297 PP/12 fix uninitialised greeting string from PP/03 (smtps client support).
299 PP/13 shell and compiler warnings fixes for RC1-RC4 changes.
301 PP/14 fix log_write() format string regression from TF/03.
302 Bugzilla 1152. Patch from Dmitry Isaikin.
308 PP/01 The new ldap_require_cert option would segfault if used. Fixed.
310 PP/02 Harmonised TLS library version reporting; only show if debugging.
311 Layout now matches that introduced for other libraries in 4.74 PP/03.
313 PP/03 New openssl_options items: no_sslv2 no_sslv3 no_ticket no_tlsv1
315 PP/04 New "dns_use_edns0" global option.
317 PP/05 Don't segfault on misconfiguration of ref:name exim-user as uid.
320 PP/06 Extra paranoia around buffer usage at the STARTTLS transition.
321 nb: Exim is not vulnerable to http://www.kb.cert.org/vuls/id/555316
323 TK/01 Updated PolarSSL code to 0.14.2.
324 Bugzilla 1097. Patch from Andreas Metzler.
326 PP/07 Catch divide-by-zero in ${eval:...}.
329 PP/08 Condition negation of bool{}/bool_lax{} did not negate. Fixed.
332 TK/02 Bugzilla 1106: CVE-2011-1764 - DKIM log line was subject to a
333 format-string attack -- SECURITY: remote arbitrary code execution.
335 TK/03 SECURITY - DKIM signature header parsing was double-expanded, second
336 time unintentionally subject to list matching rules, letting the header
337 cause arbitrary Exim lookups (of items which can occur in lists, *not*
338 arbitrary string expansion). This allowed for information disclosure.
340 PP/09 Fix another SIGFPE (x86) in ${eval:...} expansion, this time related to
341 INT_MIN/-1 -- value coerced to INT_MAX.
347 NM/01 Workround for PCRE version dependency in version reporting
350 TF/01 Update valgrind.h and memcheck.h to copies from valgrind-3.6.0.
351 This fixes portability to compilers other than gcc, notably
352 Solaris CC and HP-UX CC. Fixes Bugzilla 1050.
354 TF/02 Bugzilla 139: Avoid using the += operator in the modular lookup
355 makefiles for portability to HP-UX and POSIX correctness.
357 PP/01 Permit LOOKUP_foo enabling on the make command-line.
358 Also via indented variable definition in the Makefile.
359 (Debugging by Oliver Heesakkers).
361 PP/02 Restore caching of spamd results with expanded spamd_address.
362 Patch from author of expandable spamd_address patch, Wolfgang Breyha.
364 PP/03 Build issue: lookups-Makefile now exports LC_ALL=C
365 Improves build reliability. Fix from: Frank Elsner
367 NM/02 Fix wide character breakage in the rfc2047 coding
368 Fixes bug 1064. Patch from Andrey N. Oktyabrski
370 NM/03 Allow underscore in dnslist lookups
371 Fixes bug 1026. Patch from Graeme Fowler
373 PP/04 Bugzilla 230: Support TLS-enabled LDAP (in addition to ldaps).
374 Code patches from Adam Ciarcinski of NetBSD.
376 NM/04 Fixed exiqgrep to cope with mailq missing size issue
379 PP/05 Bugzilla 1083: when lookup expansion defers, escape the output which
380 is logged, to avoid truncation. Patch from John Horne.
382 PP/06 Bugzilla 1042: implement freeze_signal on pipe transports.
383 Patch from Jakob Hirsch.
385 PP/07 Bugzilla 1061: restrict error messages sent over SMTP to not reveal
386 SQL string expansion failure details.
387 Patch from Andrey Oktyabrski.
389 PP/08 Bugzilla 486: implement %M datestamping in log filenames.
390 Patch from Simon Arlott.
392 PP/09 New lookups functionality failed to compile on old gcc which rejects
393 extern declarations in function scope.
394 Patch from Oliver Fleischmann
396 PP/10 Use sig_atomic_t for flags set from signal handlers.
397 Check getgroups() return and improve debugging.
398 Fixed developed for diagnosis in bug 927 (which turned out to be
401 PP/11 Bugzilla 1055: Update $message_linecount for maildir_tag.
402 Patch from Mark Zealey.
404 PP/12 Bugzilla 1056: Improved spamd server selection.
405 Patch from Mark Zealey.
407 PP/13 Bugzilla 1086: Deal with maildir quota file races.
408 Based on patch from Heiko Schlittermann.
410 PP/14 Bugzilla 1019: DKIM multiple signature generation fix.
411 Patch from Uwe Doering, sign-off by Michael Haardt.
413 NM/05 Fix to spam.c to accommodate older gcc versions which dislike
414 variable declaration deep within a block. Bug and patch from
417 PP/15 lookups-Makefile IRIX compatibilty coercion.
419 PP/16 Make DISABLE_DKIM build knob functional.
421 NM/06 Bugzilla 968: child_open_uid: restore default SIGPIPE handler
422 Patch by Simon Arlott
424 TF/03 Fix valgrind.h portability to C89 compilers that do not support
425 variable argument macros. Our copy now differs from upstream.
431 TF/01 Failure to get a lock on a hints database can have serious
432 consequences so log it to the panic log.
434 TF/02 Log LMTP confirmation messages in the same way as SMTP,
435 controlled using the smtp_confirmation log selector.
437 TF/03 Include the error message when we fail to unlink a spool file.
439 DW/01 Bugzilla 139: Support dynamically loaded lookups as modules.
440 With thanks to Steve Haslam, Johannes Berg & Serge Demonchaux
441 for maintaining out-of-tree patches for some time.
443 PP/01 Bugzilla 139: Documentation and portability issues.
444 Avoid GNU Makefile-isms, let Exim continue to build on BSD.
445 Handle per-OS dynamic-module compilation flags.
447 PP/02 Let /dev/null have normal permissions.
448 The 4.73 fixes were a little too stringent and complained about the
449 permissions on /dev/null. Exempt it from some checks.
450 Reported by Andreas M. Kirchwitz.
452 PP/03 Report version information for many libraries, including
453 Exim version information for dynamically loaded libraries. Created
454 version.h, now support a version extension string for distributors
455 who patch heavily. Dynamic module ABI change.
457 PP/04 CVE-2011-0017 - check return value of setuid/setgid. This is a
458 privilege escalation vulnerability whereby the Exim run-time user
459 can cause root to append content of the attacker's choosing to
462 PP/05 Bugzilla 1041: merged DCC maintainer's fixes for return code.
465 PP/06 Bugzilla 1071: fix delivery logging with untrusted macros.
466 If dropping privileges for untrusted macros, we disabled normal logging
467 on the basis that it would fail; for the Exim run-time user, this is not
468 the case, and it resulted in successful deliveries going unlogged.
469 Fixed. Reported by Andreas Metzler.
475 PP/01 Date: & Message-Id: revert to normally being appended to a message,
476 only prepend for the Resent-* case. Fixes regression introduced in
477 Exim 4.70 by NM/22 for Bugzilla 607.
479 PP/02 Include check_rfc2047_length in configure.default because we're seeing
480 increasing numbers of administrators be bitten by this.
482 JJ/01 Added DISABLE_DKIM and comment to src/EDITME
484 PP/03 Bugzilla 994: added openssl_options main configuration option.
486 PP/04 Bugzilla 995: provide better SSL diagnostics on failed reads.
488 PP/05 Bugzilla 834: provide a permit_coredump option for pipe transports.
490 PP/06 Adjust NTLM authentication to handle SASL Initial Response.
492 PP/07 If TLS negotiated an anonymous cipher, we could end up with SSL but
493 without a peer certificate, leading to a segfault because of an
494 assumption that peers always have certificates. Be a little more
495 paranoid. Problem reported by Martin Tscholak.
497 PP/08 Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content
498 filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes
499 NB: ClamAV planning to remove STREAM in "middle of 2010".
500 CL also introduces -bmalware, various -d+acl logging additions and
501 more caution in buffer sizes.
503 PP/09 Implemented reverse_ip expansion operator.
505 PP/10 Bugzilla 937: provide a "debug" ACL control.
507 PP/11 Bugzilla 922: Documentation dusting, patch provided by John Horne.
509 PP/12 Bugzilla 973: Implement --version.
511 PP/13 Bugzilla 752: Refuse to build/run if Exim user is root/0.
513 PP/14 Build without WITH_CONTENT_SCAN. Path from Andreas Metzler.
515 PP/15 Bugzilla 816: support multiple condition rules on Routers.
517 PP/16 Add bool_lax{} expansion operator and use that for combining multiple
518 condition rules, instead of bool{}. Make both bool{} and bool_lax{}
519 ignore trailing whitespace.
521 JJ/02 prevent non-panic DKIM error from being sent to paniclog
523 JJ/03 added tcp_wrappers_daemon_name to allow host entries other than
526 PP/17 Fix malware regression for cmdline scanner introduced in PP/08.
527 Notification from Dr Andrew Aitchison.
529 PP/18 Change ClamAV response parsing to be more robust and to handle ClamAV's
530 ExtendedDetectionInfo response format.
531 Notification from John Horne.
533 PP/19 OpenSSL 1.0.0a compatibility const-ness change, should be backwards
536 PP/20 Added a CONTRIBUTING file. Fixed the documentation build to use http:
537 XSL and documented dependency on system catalogs, with examples of how
540 DW/21 Added Valgrind hooks in store.c to help it capture out-of-bounds store
543 DW/22 Bugzilla 1044: CVE-2010-4345 - partial fix: restrict default behaviour
544 of CONFIGURE_OWNER and CONFIGURE_GROUP options to no longer allow a
545 configuration file which is writeable by the Exim user or group.
547 DW/23 Bugzilla 1044: CVE-2010-4345 - part two: extend checks for writeability
548 of configuration files to cover files specified with the -C option if
549 they are going to be used with root privileges, not just the default
552 DW/24 Bugzilla 1044: CVE-2010-4345 - part three: remove ALT_CONFIG_ROOT_ONLY
553 option (effectively making it always true).
555 DW/25 Add TRUSTED_CONFIG_PREFIX_FILE option to allow alternative configuration
556 files to be used while preserving root privileges.
558 DW/26 Set FD_CLOEXEC on SMTP sockets after forking in the daemon, to ensure
559 that rogue child processes cannot use them.
561 PP/27 Bugzilla 1047: change the default for system_filter_user to be the Exim
562 run-time user, instead of root.
564 PP/28 Add WHITELIST_D_MACROS option to let some macros be overridden by the
565 Exim run-time user without dropping privileges.
567 DW/29 Remove use of va_copy() which breaks pre-C99 systems. Duplicate the
568 result string, instead of calling string_vformat() twice with the same
571 DW/30 Allow TRUSTED_CONFIG_PREFIX_FILE only for Exim or CONFIGURE_OWNER, not
572 for other users. Others should always drop root privileges if they use
573 -C on the command line, even for a whitelisted configure file.
575 DW/31 Turn TRUSTED_CONFIG_PREFIX_FILE into TRUSTED_CONFIG_FILE. No prefixes.
577 NM/01 Fixed bug #1002 - Message loss when using multiple deliveries
583 JJ/01 installed exipick 20100104.1, adding $max_received_linelength,
584 $data_path, and $header_path variables; fixed documentation bugs and
587 JJ/02 installed exipick 20100222.0, added --input-dir and --finput to allow
588 exipick to access non-standard spools, including the "frozen" queue
591 NM/01 Bugzilla 965: Support mysql stored procedures.
592 Patch from Alain Williams
594 NM/02 Bugzilla 961: Spacing fix (syntax error) on Makefile directives for NetBSD
596 NM/03 Bugzilla 955: Documentation fix for max_rcpts.
597 Patch from Andreas Metzler
599 NM/04 Bugzilla 954: Fix for unknown responses from Dovecot authenticator.
600 Patch from Kirill Miazine
602 NM/05 Bugzilla 671: Added umask to procmail example.
604 JJ/03 installed exipick 20100323.0, fixing doc bug
606 NM/06 Bugzilla 988: CVE-2010-2023 - prevent hardlink attack on sticky mail
607 directory. Notification and patch from Dan Rosenberg.
609 TK/01 PDKIM: Upgrade PolarSSL files to upstream version 0.12.1.
611 TK/02 Improve log output when DKIM signing operation fails.
613 MH/01 Treat the transport option dkim_domain as a colon separated
614 list, not as a single string, and sign the message with each element,
615 omitting multiple occurences of the same signer.
617 NM/07 Null terminate DKIM strings, Null initialise DKIM variable
618 Bugzilla 985, 986. Patch by Simon Arlott
620 NM/08 Bugzilla 967. dnsdb DNS TXT record bug fix (DKIM-related)
621 Patch by Simon Arlott
623 PP/01 Bugzilla 989: CVE-2010-2024 - work round race condition on
624 MBX locking. Notification from Dan Rosenberg.
630 TK/01 Bugzilla 912: Fix DKIM segfault on empty headers/body.
632 NM/01 Bugzilla 913: Documentation fix for gnutls_* options.
634 NM/02 Bugzilla 722: Documentation for randint. Better randomness defaults.
636 NM/03 Bugzilla 847: Enable DNSDB lookup by default.
638 NM/04 Bugzilla 915: Flag broken perl installation during build.
644 TK/01 Added patch by Johannes Berg that expands the main option
645 "spamd_address" if it starts with a dollar sign.
647 TK/02 Write list of recipients to X-Envelope-Sender header when building
648 the mbox-format spool file for content scanning (suggested by Jakob
651 TK/03 Added patch by Wolfgang Breyha that adds experimental DCC
652 (http://www.dcc-servers.net/) support via dccifd. Activated by
653 setting EXPERIMENTAL_DCC=yes in Local/Makefile.
655 TK/04 Bugzilla 673: Add f-protd malware scanner support. Patch submitted
656 by Mark Daniel Reidel <mr@df.eu>.
658 NM/01 Bugzilla 657: Embedded PCRE removed from the exim source tree.
659 When building exim an external PCRE library is now needed -
660 PCRE is a system library on the majority of modern systems.
661 See entry on PCRE_LIBS in EDITME file.
663 NM/02 Bugzilla 646: Removed unwanted C/R in Dovecot authenticator
664 conversation. Added nologin parameter to request.
665 Patch contributed by Kirill Miazine.
667 TF/01 Do not log submission mode rewrites if they do not change the address.
669 TF/02 Bugzilla 662: Fix stack corruption before exec() in daemon.c.
671 NM/03 Bugzilla 602: exicyclog now handles panic log, and creates empty
672 log files in place. Contributed by Roberto Lima.
674 NM/04 Bugzilla 667: Close socket used by dovecot authenticator.
676 TF/03 Bugzilla 615: When checking the local_parts router precondition
677 after a local_part_suffix or local_part_prefix option, Exim now
678 does not use the address's named list lookup cache, since this
679 contains cached lookups for the whole local part.
681 NM/05 Bugzilla 521: Integrated SPF Best Guess support contributed by
682 Robert Millan. Documentation is in experimental-spec.txt.
684 TF/04 Bugzilla 668: Fix parallel build (make -j).
686 NM/05.2 Bugzilla 437: Prevent Maildir aux files being created with mode 000.
688 NM/05.3 Bugzilla 598: Improvement to Dovecot authenticator handling.
689 Patch provided by Jan Srzednicki.
691 TF/05 Leading white space used to be stripped from $spam_report which
692 wrecked the formatting. Now it is preserved.
694 TF/06 Save $spam_score, $spam_bar, and $spam_report in spool files, so
695 that they are available at delivery time.
697 TF/07 Fix the way ${extract is skipped in the untaken branch of a conditional.
699 TF/08 TLS error reporting now respects the incoming_interface and
700 incoming_port log selectors.
702 TF/09 Produce a more useful error message if an SMTP transport's hosts
703 setting expands to an empty string.
705 NM/06 Bugzilla 744: EXPN did not work under TLS.
706 Patch provided by Phil Pennock.
708 NM/07 Bugzilla 769: Extraneous comma in usage fprintf
709 Patch provided by Richard Godbee.
711 NM/08 Fixed erroneous documentation references to smtp_notquit_acl to be
712 acl_smtp_notquit, added index entry.
714 NM/09 Bugzilla 787: Potential buffer overflow in string_format.
715 Patch provided by Eugene Bujak.
717 NM/10 Bugzilla 770: Problem on some platforms modifying the len parameter to
718 accept(). Patch provided by Maxim Dounin.
720 NM/11 Bugzilla 749: Preserve old behaviour of blanks comparing equal to zero.
721 Patch provided by Phil Pennock.
723 NM/12 Bugzilla 497: Correct behaviour of exiwhat when no config exists.
725 NM/13 Bugzilla 590: Correct handling of Resent-Date headers.
726 Patch provided by Brad "anomie" Jorsch.
728 NM/14 Bugzilla 622: Added timeout setting to transport filter.
729 Patch provided by Dean Brooks.
731 TK/05 Add native DKIM support (does not depend on external libraries).
733 NM/15 Bugzilla 854: Removed code that symlinks to pcre as its no longer useful.
734 Patch provided by Graeme Fowler.
736 NM/16 Bugzilla 851: Documentation example syntax fix.
738 NM/17 Changed NOTICE file to remove references to embedded PCRE.
740 NM/18 Bugzilla 894: Fix issue with very long lines including comments in
743 NM/19 Bugzilla 745: TLS version reporting.
744 Patch provided by Phil Pennock.
746 NM/20 Bugzilla 167: bool: condition support.
747 Patch provided by Phil Pennock.
749 NM/21 Bugzilla 665: gnutls_compat_mode to allow compatibility with broken
750 clients. Patch provided by Phil Pennock.
752 NM/22 Bugzilla 607: prepend (not append) Resent-Message-ID and Resent-Date.
753 Patch provided by Brad "anomie" Jorsch.
755 NM/23 Bugzilla 687: Fix misparses in eximstats.
756 Patch provided by Heiko Schlittermann.
758 NM/24 Bugzilla 688: Fix exiwhat to handle log_selector = +pid.
759 Patch provided by Heiko Schlittermann.
761 NM/25 Bugzilla 727: Use transport mode as default mode for maildirsize file.
762 plus update to original patch.
764 NM/26 Bugzilla 799: Documentation correction for ratelimit.
766 NM/27 Bugzilla 802: Improvements to local interface IP addr detection.
767 Patch provided by David Brownlee.
769 NM/28 Bugzilla 807: Improvements to LMTP delivery logging.
771 NM/29 Bugzilla 862, 866, 875: Documentation bugfixes.
773 NM/30 Bugzilla 888: TLS documentation bugfixes.
775 NM/31 Bugzilla 896: Dovecot buffer overrun fix.
777 NM/32 Bugzilla 889: Change all instances of "expr" in shell scripts to "expr --"
778 Unlike the original bugzilla I have changed all shell scripts in src tree.
780 NM/33 Bugzilla 898: Transport filter timeout fix.
781 Patch by Todd Rinaldo.
783 NM/34 Bugzilla 901: Fix sign/unsigned and UTF mistmatches.
784 Patch by Serge Demonchaux.
786 NM/35 Bugzilla 39: Base64 decode bug fixes.
787 Patch by Jakob Hirsch.
789 NM/36 Bugzilla 909: Correct connect() call in dcc code.
791 NM/37 Bugzilla 910: Correct issue with relaxed/simple handling.
793 NM/38 Bugzilla 908: Removed NetBSD3 support as no longer needed.
795 NM/39 Bugzilla 911: Fixed MakeLinks build script.
801 TK/01 Add preliminary DKIM support. Currently requires a forked version of
802 ALT-N's libdkim that I have put here:
803 http://duncanthrax.net/exim-experimental/
805 Note to Michael Haardt: I had to rename some vars in sieve.c. They
806 were called 'true' and it seems that C99 defines that as a reserved
807 keyword to be used with 'bool' variable types. That means you could
808 not include C99-style headers which use bools without triggering
809 build errors in sieve.c.
811 NM/01 Bugzilla 592: --help option is handled incorrectly if exim is invoked
812 as mailq or other aliases. Changed the --help handling significantly
813 to do whats expected. exim_usage() emits usage/help information.
815 SC/01 Added the -bylocaldomain option to eximstats.
817 NM/02 Bugzilla 619: Defended against bad data coming back from gethostbyaddr.
819 NM/03 Bugzilla 613: Documentation fix for acl_not_smtp.
821 NM/04 Bugzilla 628: PCRE update to 7.4 (work done by John Hall).
827 PH/01 Another patch from the Sieve maintainer.
829 PH/02 When an IPv6 address is converted to a string for single-key lookup
830 in an address list (e.g. for an item such as "net24-dbm;/net/works"),
831 dots are used instead of colons so that keys in lsearch files need not
832 contain colons. This was done some time before quoting was made available
833 in lsearch files. However, iplsearch files do require colons in IPv6 keys
834 (notated using the quote facility) so as to distinguish them from IPv4
835 keys. This meant that lookups for IP addresses in host lists did not work
836 for iplsearch lookups.
838 This has been fixed by arranging for IPv6 addresses to be expressed with
839 colons if the lookup type is iplsearch. This is not incompatible, because
840 previously such lookups could never work.
842 The situation is now rather anomolous, since one *can* have colons in
843 ordinary lsearch keys. However, making the change in all cases is
844 incompatible and would probably break a number of configurations.
846 TK/01 Change PRVS address formatting scheme to reflect latests BATV draft
849 MH/01 The "spam" ACL condition code contained a sscanf() call with a %s
850 conversion specification without a maximum field width, thereby enabling
851 a rogue spamd server to cause a buffer overflow. While nobody in their
852 right mind would setup Exim to query an untrusted spamd server, an
853 attacker that gains access to a server running spamd could potentially
854 exploit this vulnerability to run arbitrary code as the Exim user.
856 TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use
857 $primary_hostname instead of what libspf2 thinks the hosts name is.
859 MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for
860 a directory entry by the name of the lookup key. Previously, if a
861 symlink pointed to a non-existing file or a file in a directory that
862 Exim lacked permissions to read, a lookup for a key matching that
863 symlink would fail. Now it is enough that a matching directory entry
864 exists, symlink or not. (Bugzilla 503.)
866 PH/03 The body_linecount and body_zerocount variables are now exported in the
869 PH/04 Added the $dnslist_matched variable.
871 PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client.
872 This means they are set thereafter only if the connection becomes
875 PH/06 Added the client_condition to authenticators so that some can be skipped
876 by clients under certain conditions.
878 PH/07 The error message for a badly-placed control=no_multiline_responses left
879 "_responses" off the end of the name.
881 PH/08 Added -Mvc to output a copy of a message in RFC 2822 format.
883 PH/09 Tidied the code for creating ratelimiting keys, creating them explicitly
884 (without spaces) instead of just copying the configuration text.
886 PH/10 Added the /noupdate option to the ratelimit ACL condition.
888 PH/11 Added $max_received_linelength.
890 PH/12 Added +ignore_defer and +include_defer to host lists.
892 PH/13 Installed PCRE version 7.2. This needed some changes because of the new
893 way in which PCRE > 7.0 is built.
895 PH/14 Implemented queue_only_load_latch.
897 PH/15 Removed an incorrect (int) cast when reading the value of SIZE in a
898 MAIL command. The effect was to mangle the value on 64-bit systems.
900 PH/16 Another patch from the Sieve maintainer.
902 PH/17 Added the NOTQUIT ACL, based on a patch from Ted Cooper.
904 PH/18 If a system quota error occurred while trying to create the file for
905 a maildir delivery, the message "Mailbox is full" was not appended to the
906 bounce if the delivery eventually timed out. Change 4.67/27 below applied
907 only to a quota excession during the actual writing of the file.
909 PH/19 It seems that peer DN values may contain newlines (and other non-printing
910 characters?) which causes problems in log lines. The DN values are now
911 passed through string_printing() before being added to log lines.
913 PH/20 Added the "servers=" facility to MySQL and PostgreSQL lookups. (Oracle
914 and InterBase are left for another time.)
916 PH/21 Added message_body_newlines option.
918 PH/22 Guard against possible overflow in moan_check_errorcopy().
920 PH/23 POSIX allows open() to be a macro; guard against that.
922 PH/24 If the recipient of an error message contained an @ in the local part
923 (suitably quoted, of course), incorrect values were put in $domain and
924 $local_part during the evaluation of errors_copy.
930 MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address
931 is unset (happens when testing with -bh and -oMi isn't used). Thanks to
934 PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not
935 issue a MAIL command.
937 PH/02 In an ACL statement such as
939 deny dnslists = X!=127.0.0.2 : X=127.0.0.2
941 if a client was not listed at all, or was listed with a value other than
942 127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list,
943 the condition was not true (as it should be), so access was not denied.
944 The bug was that the ! inversion was incorrectly passed on to the second
945 item. This has been fixed.
947 PH/03 Added additional dnslists conditions == and =& which are different from
948 = and & when the dns lookup returns more than one IP address.
950 PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the
951 cipher suites used by GnuTLS. These options are ignored by OpenSSL.
953 PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_
954 FSYNC, which compiles an option called disable_fsync that allows for
955 bypassing fsync(). The documentation is heavily laced with warnings.
957 SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket.
959 PH/06 Some tidies to the infrastructure of the Test Suite that is concerned
960 with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT
961 to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile,
962 including adding "make clean"; (3) Added -fPIC when compiling the test
963 dynamically loaded module, to get rid of a warning.
965 MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce
966 message fails, move_frozen_messages = true and ignore_bounce_errors_after
967 = 0s. The bug is otherwise harmless.
969 PH/07 There was a bug in the dovecot authenticator such that the value of
970 $auth1 could be overwritten, and so not correctly preserved, after a
971 successful authentication. This usually meant that the value preserved by
972 the server_setid option was incorrect.
974 PH/08 Added $smtp_count_at_connection_start, deliberately with a long name.
976 PH/09 Installed PCRE release 7.0.
978 PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being
979 run for batched SMTP input. It is now run at the start of every message
980 in the batch. While fixing this I discovered that the process information
981 (output by running exiwhat) was not always getting set for -bs and -bS
982 input. This is fixed, and it now also says "batched" for BSMTP.
984 PH/11 Added control=no_pipelining.
986 PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's
987 patch, slightly modified), and move the expansion of helo_data till after
988 the connection is made in the smtp transport (so it can use these
991 PH/13 Added ${rfc2047d: to decoded RFC 2047 strings.
993 PH/14 Added log_selector = +pid.
995 PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set.
997 PH/16 Add ${if forany and ${if forall.
999 PH/17 Added dsn_from option to vary the From: line in DSNs.
1001 PH/18 Flush SMTP output before performing a callout, unless control =
1002 no_callout_flush is set.
1004 PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender
1005 was true (the default) a successful delivery failed to delete the retry
1006 item, thus causing premature timeout of the address. The bug is now
1009 PH/20 Added hosts_avoid_pipelining to the smtp transport.
1011 PH/21 Long custom messages for fakedefer and fakereject are now split up
1012 into multiline reponses in the same way that messages for "deny" and
1013 other ACL rejections are.
1015 PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep,
1016 with slight modification.
1018 PH/23 Applied sieve patches from the maintainer "tracking the latest notify
1019 draft, changing the syntax and factoring some duplicate code".
1021 PH/24 When the log selector "outgoing_port" was set, the port was shown as -1
1022 for deliveries of the second and subsequent messages over the same SMTP
1025 PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and
1026 ${reduce, with only minor "tidies".
1028 SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match.
1030 PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its
1031 expansion side effects.
1033 PH/27 When a message times out after an over-quota error from an Exim-imposed
1034 quota, the bounce message says "mailbox is full". This message was not
1035 being given when it was a system quota that was exceeded. It now should
1038 MH/03 Made $recipients available in local_scan(). local_scan() already has
1039 better access to the recipient list through recipients_list[], but
1040 $recipients can be useful in postmaster-provided expansion strings.
1042 PH/28 The $smtp_command and $smtp_command_argument variables were not correct
1043 in the case of a MAIL command with additional options following the
1044 address, for example: MAIL FROM:<foo@bar> SIZE=1234. The option settings
1045 were accidentally chopped off.
1047 PH/29 SMTP synchronization checks are implemented when a command is read -
1048 there is a check that no more input is waiting when there shouldn't be
1049 any. However, for some commands, a delay in an ACL can mean that it is
1050 some time before the response is written. In this time, more input might
1051 arrive, invalidly. So now there are extra checks after an ACL has run for
1052 HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when
1053 pipelining has not been advertised.
1055 PH/30 MH's patch to allow iscntrl() characters to be list separators.
1057 PH/31 Unlike :fail:, a custom message specified with :defer: was not being
1058 returned in the SMTP response when smtp_return_error_details was false.
1059 This has been fixed.
1061 PH/32 Change the Dovecot authenticator to use read() and write() on the socket
1062 instead of the C I/O that was originally supplied, because problems were
1063 reported on Solaris.
1065 PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in
1066 Exim which did not show up earlier: it was assuming that a call to
1067 SSL_CTX_set_info_callback() might give an error value. In fact, there is
1068 no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback()
1069 was a macro that became an assignment, so it seemed to work. This has
1070 changed to a proper function call with a void return, hence the compile
1071 error. Exim's code has been fixed.
1073 PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit
1076 PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify".
1078 PH/36 Applied John Jetmore's patch to add -v functionality to exigrep.
1080 PH/37 If a message is not accepted after it has had an id assigned (e.g.
1081 because it turns out to be too big or there is a timeout) there is no
1082 "Completed" line in the log. When some messages of this type were
1083 selected by exigrep, they were listed as "not completed". Others were
1084 picked up by some special patterns. I have improved the selection
1085 criteria to be more general.
1087 PH/38 The host_find_failed option in the manualroute router can now be set
1088 to "ignore", to completely ignore a host whose IP address cannot be
1089 found. If all hosts are ignored, the behaviour is controlled by the new
1090 host_all_ignored option.
1092 PH/39 In a list of hosts for manualroute, if one item (either because of multi-
1093 homing or because of multiple MX records with /mx) generated more than
1094 one IP address, and the following item turned out to be the local host,
1095 all the secondary addresses of the first item were incorrectly removed
1096 from the list, along with the local host and any following hosts (which
1097 is what is supposed to happen).
1099 PH/40 When Exim receives a message, it writes the login name, uid, and gid of
1100 whoever called Exim into the -H file. In the case of the daemon it was
1101 behaving confusingly. When first started, it used values for whoever
1102 started the daemon, but after a SIGHUP it used the Exim user (because it
1103 calls itself on a restart). I have changed the code so that it now always
1106 PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a
1107 message are rejected with the same error (e.g. no authentication or bad
1108 sender address), and a DATA command is nevertheless sent (as can happen
1109 with PIPELINING or a stupid MUA), the error message that was given to the
1110 RCPT commands is included in the rejection of the DATA command. This is
1111 intended to be helpful for MUAs that show only the final error to their
1114 PH/42 Another patch from the Sieve maintainer.
1116 SC/02 Eximstats - Differentiate between permanent and temporary rejects.
1117 Eximstats - Fixed some broken HTML links and added missing column headers
1119 Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email
1120 columns for Rejects, Temp Rejects, Ham, and Spam rows.
1122 SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables.
1124 PH/43 Yet another patch from the Sieve maintainer.
1126 PH/44 I found a way to check for a TCP/IP connection going away before sending
1127 the response to the final '.' that terminates a message, but only in the
1128 case where the client has not sent further data following the '.'
1129 (unfortunately, this is allowed). However, in many cases there won't be
1130 any further data because there won't be any more messages to send. A call
1131 to select() can be used: if it shows that the input is "ready", there is
1132 either input waiting, or the socket has been closed. An attempt to read
1133 the next input character can distinguish the two cases. Previously, Exim
1134 would have sent an OK response which the client would never have see.
1135 This could lead to message repetition. This fix should cure that, at
1136 least in a lot of common cases.
1138 PH/45 Do not advertise STARTTLS in response to HELP unless it would be
1139 advertised in response to EHLO.
1145 PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
1146 fixed by 4.65/MH/01 (is this a record?) are fixed:
1148 (i) An empty string was always treated as zero by the numeric comparison
1149 operators. This behaviour has been restored.
1151 (ii) It is documented that the numeric comparison operators always treat
1152 their arguments as decimal numbers. This was broken in that numbers
1153 starting with 0 were being interpreted as octal.
1155 While fixing these problems I realized that there was another issue that
1156 hadn't been noticed. Values of message_size_limit (both the global option
1157 and the transport option) were treated as octal if they started with 0.
1158 The documentation was vague. These values are now always treated as
1159 decimal, and I will make that clear in the documentation.
1165 TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
1166 Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
1169 MH/01 Don't check that the operands of numeric comparison operators are
1170 integers when their expansion is in "skipping" mode (fixes bug
1171 introduced by 4.64-PH/07).
1173 PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
1174 child addresses, Exim now panics and dies. Previously, because the count
1175 is held in a short int, deliveries were likely to be lost. As such a
1176 large number of recipients for a single message is ridiculous
1177 (performance will be very, very poor), I have chosen to impose a limit
1178 rather than extend the field.
1184 TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
1185 leftover -K file (the existence of which was triggered by #402).
1186 While we were at it, introduced process PID as part of the -K
1187 filename. This should rule out race conditions when creating
1190 TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
1191 processing considerably. Previous code took too long for large mails,
1192 triggering a timeout which in turn triggers #401.
1194 TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
1195 in the DK code in transports.c. sendfile() is not really portable,
1196 hence the _LINUX specificness.
1198 TF/01 In the add_headers option to the mail command in an Exim filter,
1199 there was a bug that Exim would claim a syntax error in any
1200 header after the first one which had an odd number of characters
1203 PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
1204 callout verification, Exim cached a "reject" for the entire domain. This
1205 is correct for most verifications, but it is not correct for a recipient
1206 verification with use_sender or use_postmaster set, because in that case
1207 the callout does not use MAIL FROM:<>. Exim now distinguishes the special
1208 case of MAIL FROM:<> rejection from other early rejections (e.g.
1209 rejection of HELO). When verifying a recipient using a non-null MAIL
1210 address, the cache is ignored if it shows MAIL FROM:<> rejection.
1211 Whatever the result of the callout, the value of the domain cache is
1212 left unchanged (for any other kind of callout, getting as far as trying
1213 RCPT means that the domain itself is ok).
1215 PH/02 Tidied a number of unused variable and signed/unsigned warnings that
1218 PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
1219 manifest itself as EPIPE rather than ECONNECT. When tidying away a
1220 session, the daemon ignores ECONNECT errors and logs others; it now
1221 ignores EPIPE as well.
1223 PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
1224 (quoted-printable decoding).
1226 PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
1227 later the small subsequent patch to fix an introduced bug.
1229 PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
1231 PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
1233 PH/08 An error is now given if message_size_limit is specified negative.
1235 PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
1236 to be given (somewhat) arbitrary names.
1238 JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
1241 JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
1242 miscellaneous code fixes
1244 PH/10 Added the log_reject_target ACL modifier to specify where to log
1247 PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
1248 hostname. This is wrong, because it relates to the incoming message (and
1249 probably the interface on which it is arriving) and not to the outgoing
1250 callout (which could be using a different interface). This has been
1251 changed to use the value of the helo_data option from the smtp transport
1252 instead - this is what is used when a message is actually being sent. If
1253 there is no remote transport (possible with a router that sets up host
1254 addresses), $smtp_active_hostname is used.
1256 PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
1257 tweaks were necessary in order to get it to work (see also 21 below):
1258 (a) The code assumed that strncpy() returns a negative number on buffer
1259 overflow, which isn't the case. Replaced with Exim's string_format()
1261 (b) There were several signed/unsigned issues. I just did the minimum
1262 hacking in of casts. There is scope for a larger refactoring.
1263 (c) The code used strcasecmp() which is not a standard C function.
1264 Replaced with Exim's strcmpic() function.
1265 (d) The code set only $1; it now sets $auth1 as well.
1266 (e) A simple test gave the error "authentication client didn't specify
1267 service in request". It would seem that Dovecot has changed its
1268 interface. Fortunately there's a specification; I followed it and
1269 changed what the client sends and it appears to be working now.
1271 PH/13 Added $message_headers_raw to provide the headers without RFC 2047
1274 PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
1275 address A is aliased to B and C, where B exists and C does not. Without
1276 -v the output is "A verified" because verification stops after a
1277 successful redirection if more than one address is generated. However,
1278 with -v the child addresses are also verified. Exim was outputting "A
1279 failed to verify" and then showing the successful verification for C,
1280 with its parentage. It now outputs "B failed to verify", showing B's
1281 parentage before showing the successful verification of C.
1283 PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
1284 look up a TXT record in a specific list after matching in a combined
1287 PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
1288 RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
1289 they consult the DNS. I had assumed they would set it the way they
1290 wanted; and indeed my experiments on Linux seem to show that in some
1291 cases they do (I could influence IPv6 lookups but not IPv4 lookups).
1292 To be on the safe side, however, I have now made the interface to
1293 host_find_byname() similar to host_find_bydns(), with an argument
1294 containing the DNS resolver options. The host_find_byname() function now
1295 sets these options at its start, just as host_find_bydns() does. The smtp
1296 transport options dns_qualify_single and dns_search_parents are passed to
1297 host_find_byname() when gethostbyname=TRUE in this transport. Other uses
1298 of host_find_byname() use the default settings of RES_DEFNAMES
1299 (qualify_single) but not RES_DNSRCH (search_parents).
1301 PH/17 Applied (a modified version of) Nico Erfurth's patch to make
1302 spool_read_header() do less string testing, by means of a preliminary
1303 switch on the second character of optional "-foo" lines. (This is
1304 overdue, caused by the large number of possibilities that now exist.
1305 Originally there were few.) While I was there, I also converted the
1306 str(n)cmp tests so they don't re-test the leading "-" and the first
1307 character, in the hope this might squeeze out yet more improvement.
1309 PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
1310 flag allowing group syntax was set by the header_syntax check but not
1311 turned off, possible causing trouble later; (2) The flag was not being
1312 set at all for the header_verify test, causing "group"-style headers to
1313 be rejected. I have now set it in this case, and also caused header_
1314 verify to ignore an empty address taken from a group. While doing this, I
1315 came across some other cases where the code for allowing group syntax
1316 while scanning a header line wasn't quite right (mostly, not resetting
1317 the flag correctly in the right place). These bugs could have caused
1318 trouble for malformed header lines. I hope it is now all correct.
1320 PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
1321 with the "reply" argument non-NULL. The code, however (which originally
1322 came from elsewhere) had *some* tests for NULL when it wrote to *reply,
1323 but it didn't always do it. This confused somebody who was copying the
1324 code for some other use. I have removed all the tests.
1326 PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
1327 feature that was used to support insecure browsers during the U.S. crypto
1328 embargo. It requires special client support, and Exim is probably the
1329 only MTA that supported it -- and would never use it because real RSA is
1330 always available. This code has been removed, because it had the bad
1331 effect of slowing Exim down by computing (never used) parameters for the
1332 RSA_EXPORT functionality.
1334 PH/21 On the advice of Timo Sirainen, added a check to the dovecot
1335 authenticator to fail if there's a tab character in the incoming data
1336 (there should never be unless someone is messing about, as it's supposed
1337 to be base64-encoded). Also added, on Timo's advice, the "secured" option
1338 if the connection is using TLS or if the remote IP is the same as the
1339 local IP, and the "valid-client-cert option" if a client certificate has
1342 PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
1343 authenticators. This can be used for authorization after authentication
1344 succeeds. (In the case of plaintext, it servers for both authentication
1347 PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
1348 if any retry times were supplied.
1350 PH/24 Exim crashed if verify=helo was activated during an incoming -bs
1351 connection, where there is no client IP address to check. In this
1352 situation, the verify now always succeeds.
1354 PH/25 Applied John Jetmore's -Mset patch.
1356 PH/26 Added -bem to be like -Mset, but loading a message from a file.
1358 PH/27 In a string expansion for a processed (not raw) header when multiple
1359 headers of the same name were present, leading whitespace was being
1360 removed from all of them, but trailing whitespace was being removed only
1361 from the last one. Now trailing whitespace is removed from each header
1362 before concatenation. Completely empty headers in a concatenation (as
1363 before) are ignored.
1365 PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
1366 Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
1368 PH/29 [Removed. This was a change that I later backed out, and forgot to
1369 correct the ChangeLog entry (that I had efficiently created) before
1370 committing the later change.]
1372 PH/30 Exim was sometimes attempting to deliver messages that had suffered
1373 address errors (4xx response to RCPT) over the same connection as other
1374 messages routed to the same hosts. Such deliveries are always "forced",
1375 so retry times are not inspected. This resulted in far too many retries
1376 for the affected addresses. The effect occurred only when there were more
1377 hosts than the hosts_max_try setting in the smtp transport when it had
1378 the 4xx errors. Those hosts that it had tried were not added to the list
1379 of hosts for which the message was waiting, so if all were tried, there
1380 was no problem. Two fixes have been applied:
1382 (i) If there are any address or message errors in an SMTP delivery, none
1383 of the hosts (tried or untried) are now added to the list of hosts
1384 for which the message is waiting, so the message should not be a
1385 candidate for sending over the same connection that was used for a
1386 successful delivery of some other message. This seems entirely
1387 reasonable: after all the message is NOT "waiting for some host".
1388 This is so "obvious" that I'm not sure why it wasn't done
1389 previously. Hope I haven't missed anything, but it can't do any
1390 harm, as the worst effect is to miss an optimization.
1392 (ii) If, despite (i), such a delivery is accidentally attempted, the
1393 routing retry time is respected, so at least it doesn't keep
1394 hammering the server.
1396 PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
1397 in ${readsocket because some servers need this prod.
1399 PH/32 Added some extra debug output when updating a wait-xxx database.
1401 PH/33 The hint "could be header name not terminated by colon", which has been
1402 given for certain expansion errors for a long time, was not being given
1403 for the ${if def:h_colon_omitted{... case.
1405 PH/34 The spec says: "With one important exception, whenever a domain list is
1406 being scanned, $domain contains the subject domain." There was at least
1407 one case where this was not true.
1409 PH/35 The error "getsockname() failed: connection reset by peer" was being
1410 written to the panic log as well as the main log, but it isn't really
1411 panic-worthy as it just means the connection died rather early on. I have
1412 removed the panic log writing for the ECONNRESET error when getsockname()
1415 PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
1416 runs only) independently of the message's sender address. This meant
1417 that, if the 4xx error was in fact related to the sender, a different
1418 message to the same recipient with a different sender could confuse
1419 things. In particualar, this can happen when sending to a greylisting
1420 server, but other circumstances could also provoke similar problems.
1421 I have changed the default so that the retry time for these errors is now
1422 based a combination of the sender and recipient addresses. This change
1423 can be overridden by setting address_retry_include_sender=false in the
1426 PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
1427 remote server are returned as part of bounce messages. This was not
1428 happening for LMTP over a pipe (the lmtp transport), but now it is the
1429 same for both kinds of LMTP.
1431 PH/38 Despite being documented as not happening, Exim was rewriting addresses
1432 in header lines that were in fact CNAMEs. This is no longer the case.
1434 PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
1435 and queue runs started by the daemon processed all messages. This has
1436 been fixed so that -R and -S can now usefully be given with -q<time>.
1438 PH/40 Import PCRE release 6.7 (fixes some bugs).
1440 PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
1442 PH/42 Give an error if -q is specified more than once.
1444 PH/43 Renamed the variables $interface_address and $interface_port as
1445 $received_ip_address and $received_port, to make it clear that these
1446 values apply to message reception, and not to the outgoing interface when
1447 a message is delivered. (The old names remain recognized, of course.)
1449 PH/44 There was no timeout on the connect() call when using a Unix domain
1450 socket in the ${readsocket expansion. There now is.
1452 PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
1453 be meaningful with "accept".
1455 SC/01 Eximstats V1.43
1456 Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
1458 SC/02 Eximstats V1.44
1459 Use a glob alias rather than an array ref in the generated
1460 parser. This improves both readability and performance.
1462 SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
1463 Collect SpamAssassin and rejection statistics.
1464 Don't display local sender or destination tables unless
1465 there is data to show.
1466 Added average volumes into the top table text output.
1468 SC/04 Eximstats V1.46
1469 Collect data on the number of addresses (recipients)
1470 as well as the number of messages.
1472 SC/05 Eximstats V1.47
1473 Added 'Message too big' to the list of mail rejection
1474 reasons (thanks to Marco Gaiarin).
1476 SC/06 Eximstats V1.48
1477 Mainlog lines which have GMT offsets and are too short to
1478 have a flag are now skipped.
1480 SC/07 Eximstats V1.49 (Alain Williams)
1481 Added the -emptyok flag.
1483 SC/08 Eximstats V1.50
1484 Fixes for obtaining the IP address from reject messages.
1486 JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
1487 (added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
1488 whitesspace changes from 4.64-PH/27
1490 JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
1493 JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
1494 are found, allow negative numbers in numeric criteria)
1496 JJ/06 exipick.20061117.2, added new $message_body_missing variable
1498 JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
1499 to match changes made in 4.64-PH/43
1501 PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
1503 PH/47 Put in an explicit test for a DNS lookup of an address record where the
1504 "domain" is actually an IP address, and force a failure. This locks out
1505 those revolvers/nameservers that support "A-for-A" lookups, in
1506 contravention of the specifications.
1508 PH/48 When a host name was looked up from an IP address, and the subsequent
1509 forward lookup of the name timed out, the host name was left in
1510 $sender_host_name, contrary to the specification.
1512 PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
1513 restricted to single-key lookups, Exim was not diagnosing an error if
1514 * or *@ was used with a query-style lookup.
1516 PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
1518 MH/01 local_scan ABI version incremented to 1.1. It should have been updated
1519 long ago, but noone interested enough thought of it. Let's just say that
1520 the "1.1" means that there are some new functions that weren't there at
1521 some point in the past.
1523 PH/51 Error processing for expansion failure of helo_data from an smtp
1524 transport during callout processing was broken.
1526 PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
1527 tested/used via the -bh/-bhc/-bs options.
1529 PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
1530 bug, fixed in subsequent PCRE releases).
1532 PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
1533 arises when using the Solaris LDAP libraries (but not with OpenLDAP).
1535 PH/55 Check for a ridiculously long file name in exim_dbmbuild.
1541 SC/01 Use a glob alias rather than an array ref in eximstats generated
1542 parser. This improves both readability and performance.
1544 SC/02 Collect SpamAssassin and rejection statistics in eximstats.
1545 Don't display local sender or destination tables in eximstats unless
1546 there is data to show.
1547 Added average volumes into the eximstats top table text output.
1549 SC/03 Collect data on the number of addresses (recipients) as well
1550 as the number of messages in eximstats.
1552 TF/01 Correct an error in the documentation for the redirect router. Exim
1553 does (usually) call initgroups() when daemonizing.
1555 TF/02 Call initgroups() when dropping privilege in exim.c, so that Exim runs
1556 with consistent privilege compared to when running as a daemon.
1558 TF/03 Note in the spec that $authenticated_id is not set for local
1559 submissions from trusted users.
1561 TF/04 The ratelimit per_rcpt option now works correctly in acl_not_smtp.
1562 Thanks to Dean Brooks <dean@iglou.com> for the patch.
1564 TF/05 Make it easier to get SMTP authentication and TLS/SSL support working
1565 by adding some example configuration directives to the default
1566 configuration file. A little bit of work is required to uncomment the
1567 directives and define how usernames and passwords are checked, but
1568 there is now a framework to start from.
1570 PH/01 Added #define LDAP_DEPRECATED 1 to ldap.c because some of the "old"
1571 functions that Exim currently uses aren't defined in ldap.h for OpenLDAP
1572 without this. I don't know how relevant this is to other LDAP libraries.
1574 PH/02 Add the verb name to the "unknown ACL verb" error.
1576 PH/03 Magnus Holmgren's patch for filter_prepend_home.
1578 PH/03 Fixed Bugzilla #101: macro definition between ACLs doesn't work.
1580 PH/04 Applied Magnus Holmgren's patch to fix Bugzilla #98: transport's home
1581 directory not expanded when it should be if an expanded home directory
1582 was set for the address (which is overridden by the transport).
1584 PH/05 Applied Alex Kiernan's patch to fix Bugzilla #99: a problem with
1587 PH/06 Added acl_not_smtp_start, based on Johannes Berg's patch, and set the
1588 bit to forbid control=suppress_local_fixups in the acl_not_smtp ACL,
1589 because it is too late at that time, and has no effect.
1591 PH/07 Changed ${quote_pgsql to quote ' as '' instead of \' because of a
1592 security issue with \' (bugzilla #107). I could not use the
1593 PQescapeStringConn() function, because it needs a PGconn value as one of
1596 PH/08 When testing addresses using -bt, indicate those final addresses that
1597 are duplicates that would not cause an additional delivery. At least one
1598 person was confused, thinking that -bt output corresponded to deliveries.
1599 (Suppressing duplicates isn't a good idea as you lose the information
1600 about possibly different redirections that led to the duplicates.)
1602 PH/09 Applied patch from Erik to use select() instead of poll() in spam.c on
1603 systems where poll() doesn't work, in particular OS X.
1605 PH/10 Added more information to debugging output for retry time not reached.
1607 PH/11 Applied patch from Arkadiusz Miskiewicz to apply a timeout to read
1608 operations in malware.c.
1610 PH/12 Applied patch from Magnus Holmgren to include the "h" tag in Domain Keys
1613 PH/13 If write_rejectlog was set false when logging was sent to syslog with
1614 syslog_duplication set false, log lines that would normally be written
1615 both the the main log and to the reject log were not written to syslog at
1618 PH/14 In the default configuration, change the use of "message" in ACL warn
1619 statements to "add_header".
1621 PH/15 Diagnose a filter syntax error for "seen", "unseen", or "noerror" if not
1622 not followed by a command (e.g. "seen endif").
1624 PH/16 Recognize SMTP codes at the start of "message" in ACLs and after :fail:
1625 and :defer: in a redirect router. Add forbid_smtp_code to suppress the
1628 PH/17 Added extra conditions to the default value of delay_warning_condition
1632 { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
1633 { match{$h_precedence:}{(?i)bulk|list|junk} } \
1634 { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
1637 The Auto-Submitted: and various List- headers are standardised, whereas I
1638 don't think Precedence: ever was.
1640 PH/18 Refactored debugging code in route_finduser() to show more information,
1641 in particular, the error code if getpwnam() issues one.
1643 PH/19 Added PQsetClientEncoding(conn, "SQL_ASCII") to the pgsql code module.
1644 This is apparently needed in addition to the PH/07 change above to avoid
1645 any possible encoding problems.
1647 PH/20 Perl can change the locale. Exim was resetting it after a ${perl call,
1648 but not after initializing Perl.
1650 PH/21 Added a call to PQsetNoticeProcessor() to catch pgsql "notices" and
1651 output them only if debugging. By default they are written stderr,
1652 apparently, which is not desirable.
1654 PH/22 Added Alain Williams' LDAP patch to support setting REFERRALS=off on
1657 JJ/01 exipick: added --reverse (and -R synonym), --random, --size, --sort and
1660 JJ/02 exipick: rewrote --help documentation to hopefully make more clear.
1662 PH/23 Made -oMaa and -oMt work with -bh and -bs to pretend the connection is
1663 authenticated or an ident call has been made. Suppress the default
1664 values for $authenticated_id and $authenticated_sender (but permit -oMai
1665 and -oMas) when testing with -bh.
1667 PH/24 Re-jigged the order of the tests in the default configuration so that the
1668 tests for valid domains and recipients precede the DNS black list and CSA
1669 tests, on the grounds that those ones are more expensive.
1671 PH/25 Exim was not testing for a space following SMTP commands such as EHLO
1672 that require one. Thus, EHLORHUBARB was interpreted as a valid command.
1673 This bug exists in every version of Exim that I still have, right back to
1676 PH/26 (n)wildlsearch lookups are documented as being done case-insensitively.
1677 However, an attempt to turn on case-sensitivity in a regex key by
1678 including (?-i) didn't work because the subject string was already
1679 lowercased, and the effects were non-intuitive. It turns out that a
1680 one-line patch can be used to allow (?-i) to work as expected.
1686 TF/01 Fix the add_header change below (4.61 PH/55) which had a bug that (amongst
1687 other effects) broke the use of negated acl sub-conditions.
1689 PH/01 ${readsocket now supports Internet domain sockets (modified John Jetmore
1692 PH/02 When tcp-wrappers is called from Exim, it returns only "deny" or "allow".
1693 "Deny" causes Exim to reject the incoming connection with a 554 error.
1694 Unfortunately, if there is a major crisis, such as a disk failure,
1695 tcp-wrappers gives "deny", whereas what one would like would be some
1696 kind of temporary error. A kludge has been added to help with this.
1697 Before calling hosts_ctl(), errno is set zero. If the result is "deny", a
1698 554 error is used if errno is still zero or contains ENOENT (which occurs
1699 if either of the /etc/hosts.{allow,deny} files is missing). Otherwise, a
1702 PH/03 Add -lutil to the default FreeBSD LIBS setting.
1704 PH/04 Change PH/19 for 4.61 was too wide. It should not be applied to host
1705 errors. Otherwise a message that provokes a temporary error (when other
1706 messages do not) can cause a whole host to time out.
1708 PH/05 Batch deliveries by appendfile and pipe transports did not work when the
1709 addresses were routed directly to files or pipes from a redirect router.
1710 File deliveries just didn't batch; pipe deliveries might have suffered
1713 PH/06 A failure to get a lock for a hints database would erroneously always say
1714 "Failed to get write lock", even when it was really a read lock.
1716 PH/07 The appendfile transport was creating MBX lock files with a fixed mode
1717 of 0600. This has been changed to use the value of the lockfile_mode
1718 option (which defaults to 0600).
1720 PH/08 Applied small patch from the Sieve maintainer.
1722 PH/09 If maildir_quota_directory_regex was set to exclude (say) the .Trash
1723 folder from quota calculations, a direct delivery into this folder messed
1724 up the contents of the maildirsize file. This was because the regex was
1725 used only to exclude .Trash (or whatever) when the size of the mailbox
1726 was calculated. There was no check that a delivery was happening into an
1727 excluded directory. This bug has been fixed by ignoring all quota
1728 processing for deliveries into excluded directories.
1730 PH/10 Added the maildirfolder_create_regex option to appendfile.
1736 PH/01 The code for finding all the local interface addresses on a FreeBSD
1737 system running IPv6 was broken. This may well have applied to all BSD
1738 systems, as well as to others that have similar system calls. The broken
1739 code found IPv4 interfaces correctly, but gave incorrect values for the
1740 IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
1741 that it would not match correctly against @[] and not recognize the IPv6
1744 PH/02 The ipliteral router was not recognizing addresses of the form user@
1745 [ipv6:....] because it didn't know about the "ipv6:" prefix.
1747 PH/03 Added disable_ipv6.
1749 PH/04 Changed $reply_address to use the raw form of the headers instead of the
1750 decoded form, because it is most often used to construct To: headers
1751 lines in autoreplies, and the decoded form may well be syntactically
1752 invalid. However, $reply_address has leading white space removed, and all
1753 newlines turned into spaces so that the autoreply transport does not
1756 PH/05 If group was specified without a user on a router, and no group or user
1757 was specified on a transport, the group from the router was ignored.
1759 PH/06 Increased the number of ACL variables to 20 of each type, and arranged
1760 for visible compile-time settings that can be used to change these
1761 numbers, for those that want even more. Backwards compatibility with old
1762 spool files has been maintained. However, going back to a previous Exim
1763 release will lost any variables that are in spool files.
1765 PH/07 Two small changes when running in the test harness: increase delay when
1766 passing a TCP/IP connection to a new process, in case the original
1767 process has to generate a bounce, and remove special handling of
1768 127.0.0.2 (sic), which is no longer necessary.
1770 PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
1771 be the same on different OS.
1773 PH/09 Moved a debug statement in filter processing to avoid a race problem when
1776 JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
1777 whether --show-vars was specified or not
1779 JJ/02 exipick: Added support for new ACL variable spool format introduced
1782 PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
1783 syntactically invalid From: or Reply-to: line, and a filter used this to
1784 generate an autoreply, and therefore failed to obtain an address for the
1785 autoreply, Exim could try to deliver to a non-existent relative file
1786 name, causing unrelated and misleading errors. What now happens is that
1787 it logs this as a hard delivery error, but does not attempt to create a
1790 PH/11 The exinext utility has a -C option for testing purposes, but although
1791 the given file was scanned by exinext itself; it wasn't being passed on
1792 when Exim was called.
1794 PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
1795 an end-of-file indication when reading a command response.
1797 PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
1798 compiled. In many other places in Exim, IPv6 addresses are always
1799 recognized, so I have changed this. It also means that IPv4 domain
1800 literals of the form [IPV4:n.n.n.n] are now always recognized.
1802 PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
1803 used if the router is not running as root, for example, when verifying at
1804 ACL time, or when using -bh. The debugging output from this situation was
1805 non-existent - all you got was a failure to exec. I have made two
1808 (a) Failures to set uid/gid, the current directory, or a process leader
1809 in a subprocess such as that created by queryprogram now generate
1810 suitable debugging ouput when -d is set.
1812 (b) The queryprogram router detects when it is not running as root,
1813 outputs suitable debugging information if -d is set, and then runs
1814 the subprocess without attempting to change uid/gid.
1816 PH/15 Minor change to Makefile for building test_host (undocumented testing
1819 PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
1820 additional section of a DNS packet that returns MX or SRV records.
1821 Instead, it always explicitly searches for A/AAAA records. This avoids
1822 major problems that occur when a DNS server includes only records of one
1823 type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
1824 fixed another bug: if SRV records were looked up and the corresponding
1825 address records were *not* found in the additional section, the port
1826 values from the SRV records were lost.
1828 PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
1829 using the correct key (the original address) when searching the retry
1830 rules in order to find which one to use for generating the retry hint.
1832 PH/18 If quota_warn_message contains a From: header, Exim now refrains from
1833 adding the default one. Similarly, if it contains a Reply-To: header, the
1834 errors_reply_to option, if set, is not used.
1836 PH/19 When calculating a retry time, Exim used to measure the "time since
1837 failure" by looking at the "first failed" field in the retry record. Now
1838 it does not use this if it is later than than the arrival time of the
1839 message. Instead it uses the arrival time. This makes for better
1840 behaviour in cases where some deliveries succeed, thus re-setting the
1841 "first failed" field. An example is a quota failure for a huge message
1842 when small messages continue to be delivered. Without this change, the
1843 "time since failure" will always be short, possible causing more frequent
1844 delivery attempts for the huge message than are intended.
1845 [Note: This change was subsequently modified - see PH/04 for 4.62.]
1847 PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
1848 $1, $2, $3) because the numerical variables can be reset during some
1849 expansion items (e.g. "match"), thereby losing the authentication data.
1851 PH/21 Make -bV show the size of off_t variables so that the test suite can
1852 decide whether to run tests for quotas > 2G.
1854 PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold,
1855 mailbox_size, and mailbox_filecount in the appendfile transport. If a
1856 filecount value is greater than 2G or if a quota value is greater than 2G
1857 on a system where the size of off_t is not greater than 4, a panic error
1860 PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can
1861 never match. The debug and -bh output now contains an explicit error
1862 message indicating a malformed IPv4 address or mask.
1864 PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address
1865 1.2.3.4 without a mask. Now it is not recognized as an IP address, and
1866 PH/23 above applies.
1868 PH/25 Do not write to syslog when running in the test harness. The only
1869 occasion when this arises is a failure to open the main or panic logs
1870 (for which there is an explicit test).
1872 PH/26 Added the /no_tell option to "control=freeze".
1874 PH/27 If a host name lookup failed very early in a connection, for example, if
1875 the IP address matched host_lookup and the reverse lookup yielded a name
1876 that did not have a forward lookup, an error message of the form "no IP
1877 address found for host xxx.xxx.xxx (during SMTP connection from NULL)"
1878 could be logged. Now it outputs the IP address instead of "NULL".
1880 PH/28 An enabling patch from MH: add new function child_open_exim2() which
1881 allows the sender and the authenticated sender to be set when
1882 submitting a message from within Exim. Since child_open_exim() is
1883 documented for local_scan(), the new function should be too.
1885 PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being
1886 ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that
1887 results in an empty string is now treated as unset.
1889 PH/30 Fix eximon buffer overflow bug (Bugzilla #73).
1891 PH/31 Added sender_verify_fail logging option.
1893 PH/32 In November 2003, the code in Exim that added an empty Bcc: header when
1894 needed by RFC 822 but not by RFC 2822 was commented out. I have now
1895 tidied the source and removed it altogether.
1897 PH/33 When a queue run was abandoned because the load average was too high, a
1898 log line was always written; now it is written only if the queue_run log
1899 selector is set. In addition, the log line for abandonment now contains
1900 information about the queue run such as the pid. This is always present
1901 in "start" and "stop" lines but was omitted from the "abandon" line.
1903 PH/34 Omit spaces between a header name and the colon in the error message that
1904 is given when verify = headers_syntax fails (if there are lots of them,
1905 the message gets confusing).
1907 PH/35 Change the default for dns_check_names_pattern to allow slashes within
1908 names, as there are now some PTR records that contain slashes. This check
1909 is only to protect against broken name servers that fall over on strange
1910 characters, so the fact that it applies to all lookups doesn't matter.
1912 PH/36 Now that the new test suite is complete, we can remove some of the
1913 special code in Exim that was needed for the old test suite. For example,
1914 sorting DNS records because real resolvers return them in an arbitrary
1915 order. The new test suite's fake resolver always returns records in the
1918 PH/37 When running in the test harness, use -odi for submitted messages (e.g.
1919 bounces) except when queue_only is set, to avoid logging races between
1920 the different processes.
1922 PH/38 Panic-die if .include specifies a non-absolute path.
1924 PH/39 A tweak to the "H" retry rule from its user.
1926 JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified
1927 a label. They prevented compilation on older perls.
1929 JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused
1930 a warning to be raised on newish perls.
1932 JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages
1933 on queue. Changes to match documented behaviour of showing count of
1934 messages matching specified criteria.
1936 PH/40 Changed the default ident timeout from 30s to 5s.
1938 PH/41 Added support for the use of login_cap features, on those BSD systems
1939 that have them, for controlling the resources used by pipe deliveries.
1941 PH/42 The content-scanning code uses fopen() to create files in which to put
1942 message data. Previously it was not paying any attention to the mode of
1943 the files. Exim runs with umask(0) because the rest of the code creates
1944 files with open(), and sets the required mode explicitly. Thus, these
1945 files were ending up world-writeable. This was not a big issue, because,
1946 being within the spool directory, they were not world-accessible. I have
1947 created a function called modefopen, which takes an additional mode
1948 argument. It sets umask(777), creates the file, chmods it to the required
1949 mode, then resets the umask. All the relevant calls to fopen() in the
1950 content scanning code have been changed to use this function.
1952 PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset
1953 to 24 hours. This avoids potential overflow problems when processing G
1954 and H retry rules. I suspect nobody ever tinkers with this value.
1956 PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile.
1958 PH/45 When the plaintext authenticator is running as a client, the server's
1959 challenges are checked to ensure they are valid base64 strings. By
1960 default, the authentication attempt is cancelled if an invalid string is
1961 received. Setting client_ignore_invalid_base64 true ignores these errors.
1962 The decoded challenge strings are now placed in $auth1, $auth2, etc. as
1963 they are received. Thus, the responses can be made to depend on the
1964 challenges. If an invalid string is ignored, an empty string is placed in
1967 PH/46 Messages that are created by the autoreply transport now contains a
1968 References: header, in accordance with RFCs 2822 and 3834.
1970 PH/47 Added authenticated_sender_force to the smtp transport.
1972 PH/48 The ${prvs expansion was broken on systems where time_t was long long.
1974 PH/49 Installed latest patch from the Sieve maintainer.
1976 PH/50 When an Exim quota was set without a file count quota, and mailbox_size
1977 was also set, the appendfile transport was unnecessarily scanning a
1978 directory of message files (e.g. for maildir delivery) to find the count
1979 of files (along with the size), even though it did not need this
1980 information. It now does the scan only if it needs to find either the
1981 size of the count of files.
1983 PH/51 Added ${time_eval: to convert Exim time strings into seconds.
1985 PH/52 Two bugs concerned with error handling when the smtp transport is
1988 (i) Exim was not creating retry information for temporary errors given
1989 for individual recipients after the DATA command when the smtp transport
1990 was used in LMTP mode. This meant that they could be retried too
1991 frequently, and not timed out correctly.
1993 (ii) Exim was setting the flag that allows error details to be returned
1994 for LMTP errors on RCPT commands, but not for LMTP errors for individual
1995 recipients that were returned after the DATA command.
1997 PH/53 This is related to PH/52, but is more general: for any failing address,
1998 when detailed error information was permitted to be returned to the
1999 sender, but the error was temporary, then after the final timeout, only
2000 "retry timeout exceeded" was returned. Now it returns the full error as
2001 well as "retry timeout exceeded".
2003 PH/54 Added control=allow_auth_unadvertised, as it seems there are clients that
2004 do this, and (what is worse) MTAs that accept it.
2006 PH/55 Added the add_header modified to ACLs. The use of "message" with "warn"
2007 will now be deprecated.
2009 PH/56 New os.c-cygwin from the Cygwin maintainer.
2011 JJ/06 exipick: added --unsorted option to allow unsorted output in all output
2012 formats (previously only available in exim formats via -bpr, -bpru,
2013 and -bpra. Now also available in native and exiqgrep formats)
2015 JJ/07 exipick: added --freeze and --thaw options to allow faster interaction
2016 with very large, slow to parse queues
2018 JJ/08 exipick: added ! as generic prefix to negate any criteria format
2020 JJ/09 exipick: miscellaneous performance enhancements (~24% improvements)
2022 PH/57 Tidies in SMTP dialogue display in debug output: (i) It was not showing
2023 responses to authentication challenges, though it was showing the
2024 challenges; (ii) I've removed the CR characters from the debug output for
2027 PH/58 Allow for the insertion of a newline as well as a space when a string
2028 is turned into more than one encoded-word during RFC 2047 encoding. The
2029 Sieve code now uses this.
2031 PH/59 Added the following errors that can be detected in retry rules: mail_4xx,
2032 data_4xx, lost_connection, tls_required.
2034 PH/60 When a VRFY deferred or FAILED, the log message rather than the user
2035 message was being sent as an SMTP response.
2037 PH/61 Add -l and -k options to exicyclog.
2039 PH/62 When verifying, if an address was redirected to one new address, so that
2040 verification continued, and the new address failed or deferred after
2041 having set something in $address_data, the value of $address_data was not
2042 passed back to the ACL. This was different to the case when no
2043 redirection occurred. The value is now passed back in both cases.
2045 PH/63 Changed the macro HAVE_LOGIN_CAP (see PH/41 for this release above) to
2046 HAVE_SETCLASSRESOURCES because there are different APIs in use that all
2047 use login_cap.h, so on its own it isn't the distinguishing feature. The
2048 new name refers directly to the setclassresources() function.
2050 PH/65 Added configuration files for NetBSD3.
2052 PH/66 Updated OS/Makefile-HP-UX for gcc 4.1.0 with HP-UX 11.
2054 PH/67 Fixed minor infelicity in the sorting of addresses to ensure that IPv6
2055 is preferred over IPv4.
2057 PH/68 The bounce_return_message and bounce_return_body options were not being
2058 honoured for bounces generated during the reception of non-SMTP messages.
2059 In particular, this applied to messages rejected by the ACL. This bug has
2060 been fixed. However, if bounce_return_message is true and bounce_return_
2061 body is false, the headers that are returned for a non-SMTP message
2062 include only those that have been read before the error was detected.
2063 (In the case of an ACL rejection, they have all been read.)
2065 PH/69 The HTML version of the specification is now built in a directory called
2066 spec_html instead of spec.html, because the latter looks like a path with
2067 a MIME-type, and this confuses some software.
2069 PH/70 Catch two compiler warnings in sieve.c.
2071 PH/71 Fixed an obscure and subtle bug (thanks Alexander & Matthias). The
2072 function verify_get_ident() calls ip_connect() to connect a socket, but
2073 if the "connect()" function timed out, ip_connect() used to close the
2074 socket. However, verify_get_ident() also closes the socket later, and in
2075 between Exim writes to the log, which may get opened at this point. When
2076 the socket was closed in ip_connect(), the log could get the same file
2077 descriptor number as the socket. This naturally causes chaos. The fix is
2078 not to close the socket in ip_connect(); the socket should be closed by
2079 the function that creates it. There was only one place in the code where
2080 this was missing, in the iplookup router, which I don't think anybody now
2081 uses, but I've fixed it anyway.
2083 PH/72 Make dns_again_means_nonexist apply to lookups using gethostbyname() as
2084 well as to direct DNS lookups. Otherwise the handling of names in host
2085 lists is inconsistent and therefore confusing.
2091 PH/01 Two changes to the default runtime configuration:
2093 (1) Move the checks for relay_from_hosts and authenticated clients from
2094 after to before the (commented out) DNS black list checks.
2096 (2) Add control=submission to the relay_from_hosts and authenticated
2097 clients checks, on the grounds that messages accepted by these
2098 statements are most likely to be submissions.
2100 PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
2102 (1) Generate an error if the third argument for the ${prvs expansion is
2105 (2) Treat a missing third argument of ${prvscheck as if it were an empty
2108 (3) Reset the variables that are obtained from the first argument of
2109 ${prvscheck and used in the second argument before leaving the code,
2110 because their memory is reclaimed, so using them afterwards may do
2113 (4) Tidy up the code for expanding the arguments of ${prvscheck one by
2114 one (it's much easier than Tom thought :-).
2116 (5) Because of (4), we can now allow for the use of $prvscheck_result
2117 inside the third argument.
2119 PH/03 For some reason, the default setting of PATH when running a command from
2120 a pipe transport was just "/usr/bin". I have changed it to
2123 PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
2124 anything to be listed in the output from -bV.
2126 PH/05 When a filter generated an autoreply, the entire To: header line was
2127 quoted in the delivery log line, like this:
2129 => >A.N.Other <ano@some.domain> <original@ddress> ...
2131 This has been changed so that it extracts the operative address. There
2132 may be more than one such address. If so, they are comma-separated, like
2135 => >ano@some.domain,ona@other.domain <original@ddress> ...
2137 PH/06 When a client host used a correct literal IP address in a HELO or EHLO
2138 command, (for example, EHLO [1.2.3.4]) and the client's IP address was
2139 not being looked up in the rDNS to get a host name, Exim was showing the
2140 IP address twice in Received: lines, even though the IP addresses were
2141 identical. For example:
2143 Received: from [1.2.3.4] (helo=[1.2.3.4])
2145 However, if the real host name was known, it was omitting the HELO data
2146 if it matched the actual IP address. This has been tidied up so that it
2147 doesn't show the same IP address twice.
2149 PH/07 When both +timestamp and +memory debugging was on, the value given by
2150 $tod_xxx expansions could be wrong, because the tod_stamp() function was
2151 called by the debug printing, thereby overwriting the timestamp buffer.
2152 Debugging no longer uses the tod_stamp() function when +timestamp is set.
2154 PH/08 When the original message was included in an autoreply transport, it
2155 always said "this is a copy of the message, including all the headers",
2156 even if body_only or headers_only was set. It now gives an appropriate
2159 PH/09 Applied a patch from the Sieve maintainer which:
2161 o fixes some comments
2162 o adds the (disabled) notify extension core
2163 o adds some debug output for the result of if/elsif tests
2164 o points to the current vacation draft in the documentation
2165 and documents the missing references header update
2169 o fixes a bug in processing the envelope test (when testing
2170 multiple envelope elements, the last element determinted the
2173 PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
2174 Electronic Mail") by including:
2176 Auto-submitted: auto-generated
2178 in the messages that it generates (bounce messages and others, such as
2179 warnings). In the case of bounce messages for non-SMTP mesages, there was
2180 also a typo: it was using "Auto_submitted" (underscore instead of
2181 hyphen). Since every message generated by Exim is necessarily in response
2182 to another message, thes have all been changed to:
2184 Auto-Submitted: auto-replied
2186 in accordance with these statements in the RFC:
2188 The auto-replied keyword:
2190 - SHOULD be used on messages sent in direct response to another
2191 message by an automatic process,
2193 - MUST NOT be used on manually-generated messages,
2195 - MAY be used on Delivery Status Notifications (DSNs) and Message
2196 Disposition Notifications (MDNs),
2198 - MUST NOT be used on messages generated by automatic or periodic
2199 processes, except for messages which are automatic responses to
2202 PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
2203 to the default Received: header definition.
2205 PH/12 Added log selector acl_warn_skipped (default on).
2207 PH/13 After a successful wildlsearch lookup, discard the values of numeric
2208 variables because (a) they are in the wrong storage pool and (b) even if
2209 they were copied, it wouldn't work properly because of the caching.
2211 PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
2212 checking when decoding. Apparently there are clients that generate
2213 overlong encoded strings. Why am I not surprised?
2215 PH/15 If the first argument of "${if match_address" was not empty, but did not
2216 contain an "@" character, Exim crashed. Now it writes a panic log message
2217 and treats the condition as false.
2219 PH/16 In autoreply, treat an empty string for "once" the same as unset.
2221 PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
2222 extension "envelope-auth". The code is finished and in agreement with
2223 other implementations, but there is no documentation so far and in fact,
2224 nobody wrote the draft yet. This extension is currently #undef'ed, thus
2225 not changing the active code.
2227 Print executed "if" and "elsif" statements when debugging is used. This
2228 helps a great deal to understand what a filter does.
2230 Document more things not specified clearly in RFC3028. I had all this
2231 sorted out, when out of a sudden new issues came to my mind. Oops."
2233 PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
2236 PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
2237 canonical form (as documented). However, after a host name lookup from
2238 the IP address, check_host() was doing a simple string comparison with
2239 addresses acquired from the DNS when checking that the found name did
2240 have the original IP as one of its addresses. Since any found IPv6
2241 addresses are likely to be in abbreviated form, the comparison could
2242 fail. Luckily, there already exists a function for doing the comparison
2243 by converting both addresses to binary, so now that is used instead of
2244 the text comparison.
2246 PH/20 There was another similar case to PH/19, when a complete host name was
2247 given in a host list; looking up its IP address could give an abbreviated
2248 form, whereas the current host's name might or might not be abbreviated.
2249 The same fix has been applied.
2255 PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
2256 set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
2259 PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
2260 the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
2262 PH/03 Typo: missing ".o" in src/pcre/Makefile.
2264 PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
2265 header line, restrict the check to what is listed in RFCs 2369 and 2929.
2266 Also, for "Auto-Submitted", treat anything other than "no" as
2267 non-personal, in accordance with RFC 3834. (Previously it treated
2268 anything starting "auto-" as non-personal.)
2270 TF/01 The control=submission/name=... option had a problem with syntax
2271 errors if the name included a slash character. The /name= option
2272 now slurps the rest of the string, so it can include any characters
2273 but it must come last in the list of options (after /sender_retain
2276 PH/05 Some modifications to the interface to the fake nameserver for the new
2284 TK/01 Added the "success_on_redirect" address verification option. See
2285 NewStuff for rationale and an example.
2287 PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
2289 PH/02 Patch to exigrep to allow it to work on syslog lines.
2291 PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
2292 fread() to skip over the body file's header line, because in Cygwin the
2293 header line is locked and is inaccessible.
2295 PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
2296 co-exist for some time) to make it clear that it is the Exim ID that is
2297 referenced, not the Message-ID: header line.
2299 PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
2300 string_format() function, because snprintf() does not exist on all
2303 PH/06 The use of forbid_filter_existstest now also locks out the use of the
2304 ${stat: expansion item.
2306 PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
2307 protocol synchronization error", to keep the pedants happy.
2309 PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
2310 well as for IRIX systems, when gcc is being used. See the host.c source
2313 PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
2315 PH/10 Named domain lists were not working if used in a queue_smtp_domains
2318 PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
2319 transport and to the smtp transport in LMTP mode.
2321 TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
2323 PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
2324 run a filter in a subprocess. This could lead to confusion in subsequent
2325 lookups in the parent process. There should also be a search_tidyup() at
2326 the end of the subprocess.
2328 PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
2329 only if the host matched helo_try_verify_hosts, which caused the
2330 verification to occur when the EHLO/HELO command was issued. The ACL just
2331 tested the remembered result. Now, if a previous verification attempt has
2332 not happened, "verify = helo" does it there and then.
2334 JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
2336 TK/03 Fix log output including CR from clamd.
2338 PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
2339 exist provoked a memory error which could cause a segfault.
2341 PH/15 Installed PCRE 6.2
2343 PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
2345 PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
2346 of the problem. Specifically, suggested +O2 rather than +O1 for the
2349 PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
2351 PH/20 If a delivery was routed to a non-standard port by means of an SRV
2352 record, the port was not correctly logged when the outgoing_port log
2353 selector was set (it logged the transort's default port).
2355 PH/21 Added support for host-specific ports to manualroute, queryprogram,
2356 fallback_hosts, and "hosts" in the smtp transport.
2358 PH/22 If the log selector "outgoing_port" is set, the port is now also given on
2359 host errors such as "Connection refused".
2361 PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
2362 authentication with radiusclient 0.4.9:
2364 - Error returned from rc_read_config was caught wrongly
2365 - Username/password not passed on to radius server due to wrong length.
2367 The presumption is that some radiusclient API changes for 4.51/PH/17
2368 were not taken care of correctly. The code is still untested by me (my
2369 Linux distribution still has 0.3.2 of radiusclient), but it was
2370 contributed by a Radius user.
2372 PH/24 When doing a callout, the value of $domain wasn't set correctly when
2373 expanding the "port" option of the smtp transport.
2375 TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
2376 while reading a MIME header. Thanks to Tom Hughes for a patch.
2378 PH/24 Include config.h inside local_scan.h so that configuration settings are
2381 PH/25 Make $smtp_command_argument available after all SMTP commands. This means
2382 that in an ACL for RCPT (for example), you can examine exactly what was
2385 PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
2386 commands, but it was not correctly comparing the address with the actual
2387 client host address. Thus, it would show the EHLO address in Received:
2388 header lines when this was not necessary.
2390 PH/27 Added the % operator to ${eval:}.
2392 PH/28 Exim tries to create and chdir to its spool directory when it starts;
2393 it should be ignoring failures (because with -C, for example, it has lost
2394 privilege). It wasn't ignoring creation failures other than "already
2397 PH/29 Added "crypteq" to the list of supported features that Exim outputs when
2400 PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
2401 because an input line was too long, either on its own, or by virtue of
2402 too many continuations, the temporary file was not being removed, and the
2403 return code was incorrect.
2405 PH/31 Missing "BOOL" in function definition in filtertest.c.
2407 PH/32 Applied Sieve patches from the maintainer.
2409 TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
2411 PH/33 Added "verify = not_blind".
2413 PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
2414 Local/Makefile (with some defaults set). These are used in built scripts
2415 such as exicyclog, but they have never been used in the exim_install
2416 script (though there are many overriding facilities there). I have
2417 arranged that the exim_install script now takes note of these two
2420 PH/35 Installed configuration files for Dragonfly.
2422 PH/36 When a locally submitted message by a trusted user did not contain a
2423 From: header, and the sender address was obtained from -f or from an SMTP
2424 MAIL command, and the trusted user did not use -F to supply a sender
2425 name, $originator_name was incorrectly used when constructing a From:
2426 header. Furthermore, $originator_name was used for submission mode
2427 messages from external hosts without From: headers in a similar way,
2428 which is clearly wrong.
2430 PH/37 Added control=suppress_local_fixups.
2432 PH/38 When log_selector = +received_sender was set, and the addition of the
2433 sender made the log line's construction buffer exactly full, or one byte
2434 less than full, an overflow happened when the terminating "\n" was
2437 PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
2438 when the result of a list match is failure because a DNS lookup failed.
2440 PH/40 RM_COMMAND is now used in the building process.
2442 PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
2443 the "build-* directories that it finds.
2445 PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
2446 address in a domain literal was a prefix of an interface address.
2448 PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
2449 when verifying a sender address, unless rewrite_headers is false.
2451 PH/44 Wrote a long comment about why errors_to addresses are verified as
2452 recipients, not senders.
2454 TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
2455 the ratelimit ACL was added.
2457 PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
2459 PH/46 Added extra information about PostgreSQL errors to the error string.
2461 PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
2462 avoiding the need to install special zones in a real server. This is
2463 backwards compatible; if it can't find the fake resolver, it drops back.
2464 Thus, both old and new test suites can be run.
2466 TF/02 Added util/ratelimit.pl
2468 TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
2469 clock is set back in time.
2471 TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
2472 Candler <B.Candler@pobox.com>.
2474 TF/05 The fix for PH/43 was not completely correct; widen_domains is always
2475 OK for addresses that are the result of redirections.
2477 PH/48 A number of further additions for the benefit of the new test suite,
2478 including a fake gethostbyname() that interfaces to the fake DNS resolver
2481 TF/06 The fix for widen_domains has also been applied to qualify_single and
2482 search_parents which are the other dnslookup options that can cause
2485 PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
2488 PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
2490 TF/07 Exim produced the error message "an SRV record indicated no SMTP
2491 service" if it encountered an MX record with an empty target hostname.
2492 The message is now "an MX or SRV record indicated no SMTP service".
2494 TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
2495 if the DNS of the sending site is misconfigured. This is quite a
2496 common situation. This change restores the behaviour of treating a
2497 helo verification defer as a failure.
2499 PH/51 If self=fail was set on a router, the bounce message did not include the
2500 actual error message.
2506 TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
2508 PH/01 When a transport filter timed out in a pipe delivery, and the pipe
2509 command itself ended in error, the underlying message about the transport
2510 filter timeout was being overwritten with the pipe command error. Now the
2511 underlying error message should be appended to the second error message.
2513 TK/01 Fix poll() being unavailable on Mac OSX 10.2.
2515 PH/02 Reduce the amount of output that "make" produces by default. Full output
2516 can still be requested.
2518 PH/03 The warning log line about a condition test deferring for a "warn" verb
2519 was being output only once per connection, rather than after each
2520 occurrence (because it was using the same function as for successful
2521 "warn" verbs). This seems wrong, so I have changed it.
2523 TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
2524 it should not have, which might have caused a crash in the right
2525 circumstances, but probably never did.
2527 PH/04 Installed a modified version of Tony Finch's patch to make submission
2528 mode fix the return path as well as the Sender: header line, and to
2529 add a /name= option so that you can make the user's friendly name appear
2532 TF/03 Added the control = fakedefer ACL modifier.
2534 TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
2535 Mark Lowes for thorough testing.
2537 TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
2539 TK/03 Merged latest SRS patch from Miles Wilton.
2541 PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
2542 with the definition in sysexits.h (which is #included earlier).
2543 Fortunately, Exim does not actually use EX_OK. The code used to try to
2544 preserve the sysexits.h value, by assumimg that macro definitions were
2545 scanned for macro replacements. I have been disabused of this notion,
2546 so now the code just undefines EX_OK before #including unistd.h.
2548 PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
2549 in the smtp transport. When a block could not be written in a single
2550 write() function, the timeout was being re-applied to each part-write.
2551 This seems wrong - if the receiver was accepting one byte at a time it
2552 would take for ever. The timeout is now adjusted when this happens. It
2553 doesn't have to be particularly precise.
2555 TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
2556 details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
2558 PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
2559 without a domain if the check to <postmaster@domain> fails.
2561 SC/01 Eximstats: added -xls and the ability to specify output files
2562 (patch written by Frank Heydlauf).
2564 SC/02 Eximstats: use FileHandles for outputing results.
2566 SC/03 Eximstats: allow any combination of xls, txt, and html output.
2568 SC/04 Eximstats: fixed display of large numbers with -nvr option
2570 SC/05 Eximstats: fixed merging of reports with empty tables.
2572 SC/06 Eximstats: added the -include_original_destination flag
2574 SC/07 Eximstats: removed tabs and trailing whitespace.
2576 TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
2578 TK/06 MBOX spool code: Add real "From " MBOX separator line
2579 so the .eml file is really in mbox format (even though
2580 most programs do not really care). Patch from Alex Miller.
2582 TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
2583 The latter is generated from $received_to and is only set if the
2584 message has one envelope recipient. SA can use these headers,
2585 obviously out-of-the-box. Patch from Alex Miller.
2587 PH/08 The ${def test on a variable was returning false if the variable's
2588 value was "0", contrary to what the specification has always said!
2589 The result should be true unless the variable is empty.
2591 PH/09 The syntax error of a character other than { following "${if
2592 def:variable_name" (after optional whitespace) was not being diagnosed.
2593 An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
2594 accidental colon was present, for example, could give incorrect results.
2596 PH/10 Tidied the code in a number of places where the st_size field of a stat()
2597 result is used (not including appendfile, where other changes are about
2600 PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
2601 This involved changing a lot of size variables from int to off_t. It
2602 should work with maildirs and everything.
2604 TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
2605 spamd dying while we are connected to it.
2607 TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
2610 PH/12 Applied Alex Kiernan's patch for the API change for the error callback
2611 function for BDB 4.3.
2613 PH/13 Changed auto_thaw such that it does not apply to bounce messages.
2615 PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
2616 the sources for PCRE have been re-arranged and more files are now
2619 PH/15 The code I had for printing potentially long long variables in PH/11
2620 above was not the best (it lost precision). The length of off_t variables
2621 is now inspected at build time, and an appropriate printing format (%ld
2622 or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
2623 to be "long long int" or "long int". This is needed for the internal
2624 formatting function string_vformat().
2626 PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
2627 the configuration file to be ":syslog", then the script "guesses" where
2628 the logs files are, rather than using the compiled in default. In our
2629 case the guess is not the same as the compiled default, so the script
2630 suddenly stopped working when I started to use syslog. The patch checks
2631 to see if log_file_path is "". If so, it attempts to read it from exim
2632 with no configuration file to get the compiled in version, before it
2633 falls back to the previous guessing code."
2635 TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
2636 implementing BATV in an Exim configuration. See NewStuff for the gory
2639 PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
2640 Makefile that are specific to HP-UX.
2642 PH/18 If the "use_postmaster" option was set for a recipient callout together
2643 with the "random" option, the postmaster address was used as the MAIL
2644 FROM address for the random test, but not for the subsequent recipient
2645 test. It is now used for both.
2647 PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
2648 patch removes a few documentation additions to RFC 3028, because the
2649 latest draft now contains them. It adds the new en;ascii-case comparator
2650 and a new error check for 8bit text in MIME parts. Comparator and
2651 require names are now matched exactly. I enabled the subaddress
2652 extension, but it is not well tested yet (read: it works for me)."
2654 PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
2655 rework some of the code of TK/09 above to avoid the hardwired use of
2656 "%lld" and "long long". Replaced the call to snprintf() with a call to
2659 PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
2660 records point to non-existent hosts", "retry timeout exceeded", and
2661 "retry time not reached for any host after a long failure period".
2663 PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
2664 experimental DomainKeys support:
2666 (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
2667 (2) On an error such as an illegally used "control", the wrong name for
2668 the control was given.
2670 These problems did NOT occur unless DomainKeys support was compiled.
2672 PH/23 Added daemon_startup_retries and daemon_startup_sleep.
2674 PH/24 Added ${if match_ip condition.
2676 PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
2677 databases so that it will be absolutely obvious if a crash occurs in the
2678 DB library. This is a regular occurrence (often caused by mis-matched
2681 PH/26 Insert a lot of missing (void) casts for functions such as chown(),
2682 chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
2683 picked up on a user's system that detects such things. There doesn't seem
2684 to be a gcc warning option for this - only an attribute that has to be
2685 put on the function's prototype. It seems that in Fedora Core 4 they have
2686 set this on a number of new functions. No doubt there will be more in due
2689 PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
2690 specify a transport. However, if an address that was verified by such a
2691 router was the subject of a callout, Exim crashed because it tried to
2692 read the rcpt_include_affixes from the non-existent transport. Now it
2693 just assumes that the setting of that option is false. This bug was
2694 introduced by 4.51/PH/31.
2696 PH/28 Changed -d+all to exclude +memory, because that information is very
2697 rarely of interest, but it makes the output a lot bigger. People tend to
2698 do -d+all out of habit.
2700 PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
2701 code in os-type was giving problems when libc.so lives in lib64, like on
2704 PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
2705 aren't the modern standard, and it seems that some systems' include files
2706 don't always have them. Exim was already checking for some of the newer
2707 ones like T_AAAA, and defining it itself. I've added checks for all the
2708 record types that Exim uses.
2710 PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
2711 not automatically generating a new one, as it is supposed to. This
2712 prevented TLS from working. If the file did exist, but contained invalid
2713 data, a new version was generated, as expected. It was only the case of a
2714 non-existent file that was broken.
2716 TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
2717 with a change in libdomainkeys > 0.64.
2719 TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
2720 from DNS. If the selector record carries the flag, it now has
2721 precedence over the domain-wide flag.
2723 TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
2725 PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
2726 the use of a port name that isn't defined in /etc/services) occurred, the
2727 message was deferred as in a normal delivery, and thus remained on the
2728 spool, instead of being failed because of the mua_wrapper setting. This
2729 is now fixed, and I tidied up some of the mua_wrapper messages at the
2732 SC/08 Eximstats: whilst parsing the mainlog(s), store information about
2733 the messages in a hash of arrays rather than using individual hashes.
2734 This is a bit cleaner and results in dramatic memory savings, albeit
2735 at a slight CPU cost.
2737 SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
2738 as requested by Marc Sherman.
2740 SC/10 Eximstats: added histograms for user specified patterns as requested
2743 SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
2745 PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
2746 fopen() in the content-scanning modules that did not already have it.
2752 TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
2753 doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
2755 TK/02 Fix ACL "control" statement not being available in MIME ACL.
2757 TK/03 Fix ACL "regex" condition not being available in MIME ACL.
2759 PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
2760 to test Sieve filters that use "vacation".
2762 PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
2763 that changes the way the GnuTLS parameters are stored in the cache file.
2764 The new format can be generated externally. For backward compatibility,
2765 if the data in the cache doesn't make sense, Exim assumes it has read an
2766 old-format file, and it generates new data and writes a new file. This
2767 means that you can't go back to an older release without removing the
2770 PH/03 A redirect router that has both "unseen" and "one_time" set does not
2771 work if there are any delivery delays because "one_time" forces the
2772 parent to be marked "delivered", so its unseen clone is never tried
2773 again. For this reason, Exim now forbids the simultaneous setting of
2776 PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
2777 redirected to themselves ("homonym" addresses). Read the long ChangeLog
2778 entry if you want to know the details. The fix, however, neglected to
2779 consider the case when local delivery batching is involved. The test for
2780 "previously delivered" was not happening when checking to see if an
2781 address could be batched with a previous (undelivered) one; under
2782 certain circumstances this could lead to multiple deliveries to the same
2785 PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
2786 in its include files, and this causes problems building Exim.
2788 PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
2789 header_syntax) but Exim was just ignoring anything given after a slash.
2790 In particular, this caused confusion with an attempt to use "verify =
2791 reverse_host_lookup/defer_ok". An error is now given when options are
2792 supplied for verify items that do not have them. (Maybe reverse_host_
2793 lookup should have a defer_ok option, but that's a different point.)
2795 PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
2796 defined by RFC 821) to 2048, because there were problems with some AUTH
2797 commands, and RFC 1869 says the size should be increased for extended
2798 SMTP commands that take arguments.
2800 PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
2803 PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
2804 "unknown" error; now it says that the functionality isn't in the binary.
2806 PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
2807 an address' error message when a string expansion fails (syntax or
2808 whatever). Otherwise the password may appear in the log. Following change
2809 PH/42 below, there is no longer a chance of it appearing in a bounce
2812 PH/11 Installed exipick version 20050225.0 from John Jetmore.
2814 PH/12 If the last host in a fallback_hosts list was multihomed, only the first
2815 of its addresses was ever tried. (Bugzilla bug #2.)
2817 PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
2818 the result incorrectly in the debug output. (It correctly added a newline
2819 to what was transported.)
2821 TF/01 Added $received_time.
2823 PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
2824 commented out examples of how to interface to a virus scanner and to
2825 SpamAssassin. Also added commented examples of av_scanner and
2826 spamd_address settings.
2828 PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
2829 and controls are allowed in which ACLs. There were a couple of minor
2830 errors. Some of the entries in the conditions table (which is a table of
2831 where they are NOT allowed) were getting very unwieldy; rewrote them as a
2832 negation of where the condition IS allowed.
2834 PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
2836 PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
2837 header file does not have a version number, so I've had to invent a new
2838 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
2839 API. The code is untested by me (my Linux distribution still has 0.3.2 of
2840 radiusclient), but it was contributed by a Radius user.
2842 PH/18 Installed Lars Mainka's patch for the support of CRL collections in
2843 files or directories, for OpenSSL.
2845 PH/19 When an Exim process that is running as root has to create an Exim log
2846 file, it does so in a subprocess that runs as exim:exim so as to get the
2847 ownership right at creation (otherwise, other Exim processes might see
2848 the file with the wrong ownership). There was no test for failure of this
2849 fork() call, which would lead to the process getting stuck as it waited
2850 for a non-existent subprocess. Forks do occasionally fail when resources
2851 run out. I reviewed all the other calls to fork(); they all seem to check
2854 PH/20 When checking for unexpected SMTP input at connect time (before writing
2855 the banner), Exim was not dealing correctly with a non-positive return
2856 from the read() function. If the client had disconnected by this time,
2857 the result was a log entry for a synchronization error with an empty
2858 string after "input=" when read() returned zero. If read() returned -1
2859 (an event I could not check), uninitialized data bytes were printed.
2860 There were reports of junk text (parts of files, etc) appearing after
2863 PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
2865 PH/22 Added support for macro redefinition, and (re)definition in between
2866 driver and ACL definitions.
2868 PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
2869 forgetting to use the resulting value; it was using the unexpanded value.
2871 PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
2872 hadn't been configured. The fix is from Juergen Kreileder, who
2873 understands it better than I do:
2875 "Here's what I see happening with three configured cyrus_sasl
2876 authenticators configured (plain, login, cram-md5):
2878 On startup auth_cyrus_sasl_init() gets called for each of these.
2879 This means three calls to sasl_listmech() without a specified mech_list.
2880 => SASL tests which mechs of all available mechs actually work
2881 => three warnings about OTP not working
2882 => the returned list contains: plain, login, cram-md5, digest-md5, ...
2884 With the patch, sasl_listmech() also gets called three times. But now
2885 SASL's mech_list option is set to the server_mech specified in the the
2886 authenticator. Or in other words, the answer from sasl_listmech()
2887 gets limited to just the mech you're testing for (which is different
2889 => the return list contains just 'plain' or 'login', 'cram-md5' or
2890 nothing depending on the value of ob->server_mech.
2892 I've just tested the patch: Authentication still works fine,
2893 unavailable mechs specified in the exim configuration are still
2894 caught, and the auth.log warnings about OTP are gone."
2896 PH/25 When debugging is enabled, the contents of the command line are added
2897 to the debugging output, even when log_selector=+arguments is not
2900 PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
2901 answer is "GNU", and only if the return is "GNU/something" is the answer
2904 PH/27 $acl_verify_message is now set immediately after the failure of a
2905 verification in an ACL, and so is available in subsequent modifiers. In
2906 particular, the message can be preserved by coding like this:
2908 warn !verify = sender
2909 set acl_m0 = $acl_verify_message
2911 Previously, $acl_verify_message was set only while expanding "message"
2912 and "log_message" when a very denied access.
2914 PH/28 Modified OS/os.c-Linux with
2916 -#ifndef OS_LOAD_AVERAGE
2917 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
2919 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
2920 nomenclature these days.)
2922 PH/29 Installed patch from the Sieve maintainer that adds the options
2923 sieve_useraddress and sieve_subaddress to the redirect router.
2925 PH/30 In these circumstances:
2926 . Two addresses routed to the same list of hosts;
2927 . First host does not offer TLS;
2928 . First host accepts first address;
2929 . First host gives temporary error to second address;
2930 . Second host offers TLS and a TLS session is established;
2931 . Second host accepts second address.
2932 Exim incorrectly logged both deliveries with the TLS parameters (cipher
2933 and peerdn, if requested) that were in fact used only for the second
2936 PH/31 When doing a callout as part of verifying an address, Exim was not paying
2937 attention to any local part prefix or suffix that was matched by the
2938 router that accepted the address. It now behaves in the same way as it
2939 does for delivery: the affixes are removed from the local part unless
2940 rcpt_include_affixes is set on the transport.
2942 PH/32 Add the sender address, as F=<...>, to the log line when logging a
2943 timeout during the DATA phase of an incoming message.
2945 PH/33 Sieve envelope tests were broken for match types other than :is. I have
2946 applied a patch sanctioned by the Sieve maintainer.
2948 PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
2949 the uid or gid is negative. A case of a negative gid caused this to be
2950 noticed. The fix allows for either to be negative.
2952 PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
2953 clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
2956 PH/36 The change PH/12 above was broken. Fixed it.
2958 PH/37 Exim used to check for duplicate addresses in the middle of routing, on
2959 the grounds that routing the same address twice would always produce the
2960 same answer. This might have been true once, but it is certainly no
2961 longer true now. Routing a child address may depend on the previous
2962 routing that produced that child. Some complicated redirection strategies
2963 went wrong when messages had multiple recipients, and made Exim's
2964 behaviour dependent on the order in which the addresses were given.
2966 I have moved the duplicate checking until after the routing is complete.
2967 Exim scans the addresses that are assigned to local and remote
2968 transports, and removes any duplicates. This means that more work will be
2969 done, as duplicates will always all be routed, but duplicates are
2970 presumably rare, so I don't expect this is of any significance.
2972 For deliveries to pipes, files, and autoreplies, the duplicate checking
2973 still happens during the routing process, since they are not going to be
2976 PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
2977 It corrects a timeout issue with spamd. This is Ian's comment: "The
2978 background is that sometimes spamd either never reads data from a
2979 connection it has accepted, or it never writes response data. The exiscan
2980 spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
2981 blindly assumes that writes won't block so it may never time out."
2983 PH/39 Allow G after quota size as well as K and M.
2985 PH/40 The value set for $authenticated_id in an authenticator may not contain
2986 binary zeroes or newlines because the value is written to log lines and
2987 to spool files. There was no check on this. Now the value is run through
2988 the string_printing() function so that such characters are converted to
2989 printable escape sequences.
2991 PH/41 $message_linecount is a new variable that contains the total number of
2992 lines in the message. Compare $body_linecount, which is the count for the
2995 PH/42 Exim no longer gives details of delivery errors for specific addresses in
2996 bounce and delay warning messages, except in certain special cases, which
2999 (a) An SMTP error message from a remote host;
3000 (b) A message specified in a :fail: redirection;
3001 (c) A message specified in a "fail" command in a system filter;
3002 (d) A message specified in a FAIL return from the queryprogram router;
3003 (e) A message specified by the cannot_route_message router option.
3005 In these cases only, Exim does include the error details in bounce and
3006 warning messages. There are also a few cases where bland messages such
3007 as "unrouteable address" or "local delivery error" are given.
3009 PH/43 $value is now also set for the "else" part of a ${run expansion.
3011 PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
3012 being worked on, but at least Exim now implements the latest version to
3015 PH/45 In a pipe transport, although a timeout while waiting for the pipe
3016 process to complete was treated as a delivery failure, a timeout while
3017 writing the message to the pipe was logged, but erroneously treated as a
3018 successful delivery. Such timeouts include transport filter timeouts. For
3019 consistency with the overall process timeout, these timeouts are now
3020 treated as errors, giving rise to delivery failures by default. However,
3021 there is now a new Boolean option for the pipe transport called
3022 timeout_defer, which, if set TRUE, converts the failures into defers for
3023 both kinds of timeout. A transport filter timeout is now identified in
3026 PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
3027 systems where "make" and "gmake" are different, calling "gmake" at top
3028 level broke things. I've arranged for the value of $(MAKE) to be passed
3029 from the Makefile to this script so that it can call the same version of
3033 A note about Exim versions 4.44 and 4.50
3034 ----------------------------------------
3036 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
3037 changes of various kinds. As a consequence, a big documentation update was
3038 needed. This delayed the release for rather longer than seemed good, especially
3039 in the light of a couple of (minor) security issues. Therefore, the changes
3040 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
3041 release. So 4.44 and 4.50 are in effect two different branches that both start
3044 I have left the 4.50 change log unchanged; it contains all the changes since
3045 4.43. The change log for 4.44 is below; many of its items are identical to
3046 those for 4.50. This seems to be the most sensible way to preserve the
3047 historical information.
3053 1. Minor wording change to the doc/README.SIEVE file.
3055 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
3056 computation of the current number of files was incorrect.
3058 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
3059 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
3062 4. Give more explanation in the error message when the command for a transport
3063 filter fails to execute.
3065 5. There are several places where Exim runs a non-Exim command in a
3066 subprocess. The SIGUSR1 signal should be disabled for these processes. This
3067 was being done only for the command run by the queryprogram router. It is
3068 now done for all such subprocesses. The other cases are: ${run, transport
3069 filters, and the commands run by the lmtp and pipe transports.
3071 6. Added CONFIGURE_GROUP build-time option.
3073 7. Some older OS have a limit of 256 on the maximum number of file
3074 descriptors. Exim was using setrlimit() to set 1000 as a large value
3075 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
3076 systems. I've change it so that if it can't get 1000, it tries for 256.
3078 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
3079 was an oversight, and furthermore, ever since the addition of extra
3080 controls (e.g. 4.43/32), the checks on when to allow different forms of
3081 "control" were broken. There should now be diagnostics for all cases when a
3082 control that does not make sense is encountered.
3084 9. Added the /retain_sender option to "control=submission".
3086 10. $recipients is now available in the predata ACL (oversight).
3088 11. Tidy the search cache before the fork to do a delivery from a message
3089 received from the command line. Otherwise the child will trigger a lookup
3090 failure and thereby defer the delivery if it tries to use (for example) a
3091 cached ldap connection that the parent has called unbind on.
3093 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
3094 of $address_data from the recipient verification was clobbered by the
3095 sender verification.
3097 13. The value of address_data from a sender verification is now available in
3098 $sender_address_data in subsequent conditions in the ACL statement.
3100 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
3102 15. Added a new option "connect=<time>" to callout options, to set a different
3105 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
3106 was its contents. (It was OK if the option was not defined at all.)
3108 17. A "Completed" log line is now written for messages that are removed from
3109 the spool by the -Mrm option.
3111 18. New variables $sender_verify_failure and $recipient_verify_failure contain
3112 information about exactly what failed.
3114 19. Added -dd to debug only the daemon process.
3116 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
3117 handles timeouts, both on the server side and network timeouts. Renamed the
3118 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
3120 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
3121 It is now set to "smtps".
3123 22. $host_address is now set to the target address during the checking of
3124 ignore_target_hosts.
3126 23. When checking ignore_target_hosts for an ipliteral router, no host name was
3127 being passed; this would have caused $sender_host_name to have been used if
3128 matching the list had actually called for a host name (not very likely,
3129 since this list is usually IP addresses). A host name is now passed as
3132 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
3133 code that specifies a non-restarting handler (typically sigaction() in
3134 modern systems) in an attempt to fix a rare and obscure crash bug.
3136 25. Narrowed the window for a race in the daemon that could cause it to ignore
3137 SIGCHLD signals. This is not a major problem, because they are used only to
3138 wake it up if nothing else does.
3140 26. A malformed maildirsize file could cause Exim to calculate negative values
3141 for the mailbox size or file count. Odd effects could occur as a result.
3142 The maildirsize information is now recalculated if the size or filecount
3145 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
3146 support for a long time. Removed HAVE_SYS_VFS_H.
3148 28. Installed the latest version of exipick from John Jetmore.
3150 29. In an address list, if the pattern was not a regular expression, an empty
3151 subject address (from a bounce message) matched only if the pattern was an
3152 empty string. Non-empty patterns were not even tested. This was the wrong
3153 because it is perfectly reasonable to use an empty address as part of a
3154 database query. An empty address is now tested by patterns that are
3155 lookups. However, all the other forms of pattern expect the subject to
3156 contain a local part and a domain, and therefore, for them, an empty
3157 address still always fails if the pattern is not itself empty.
3159 30. Exim went into a mad DNS loop when attempting to do a callout where the
3160 host was specified on an smtp transport, and looking it up yielded more
3161 than one IP address.
3163 31. Re-factored the code for checking spool and log partition space into a
3164 function that finds that data and another that does the check. The former
3165 is then used to implement four new variables: $spool_space, $log_space,
3166 $spool_inodes, and $log_inodes.
3168 32. The RFC2047 encoding function was originally intended for short strings
3169 such as real names; it was not keeping to the 75-character limit for
3170 encoded words that the RFC imposes. It now respects the limit, and
3171 generates multiple encoded words if necessary. To be on the safe side, I
3172 have increased the buffer size for the ${rfc2047: expansion operator from
3175 33. It is now permitted to omit both strings after an "if" condition; if the
3176 condition is true, the result is "true". As before, when the second string
3177 is omitted, a false condition yields an empty string. This makes it less
3178 cumbersome to write custom ACL and router conditions.
3180 34. Failure to deliver a bounce message always caused it to be frozen, even if
3181 there was an errors_to setting on the router. The errors_to setting is now
3184 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
3185 canonical form (fully expanded) before being placed in
3186 $sender_host_address.
3188 36. The table in the code that translates DNS record types into text (T_A to
3189 "A" for instance) was missing entries for NS and CNAME. It is just possible
3190 that this could have caused confusion if both these types were looked up
3191 for the same domain, because the text type is used as part of Exim's
3192 per-process caching. But the chance of anyone hitting this buglet seems
3195 37. The dnsdb lookup has been extended in a number of ways.
3197 (1) There is a new type, "zns", which walks up the domain tree until it
3198 finds some nameserver records. It should be used with care.
3200 (2) There is a new type, "mxh", which is like "mx" except that it returns
3201 just the host names, not the priorities.
3203 (3) It is now possible to give a list of domains (or IP addresses) to be
3204 looked up. The behaviour when one of the lookups defers can be
3205 controlled by a keyword.
3207 (4) It is now possible to specify the separator character for use when
3208 multiple records are returned.
3210 38. The dnslists ACL condition has been extended: it is now possible to supply
3211 a list of IP addresses and/or domains to be looked up in a particular DNS
3214 39. Added log_selector=+queue_time_overall.
3216 40. When running the queue in the test harness, wait just a tad after forking a
3217 delivery process, to get repeatability of debugging output.
3219 41. Include certificate and key file names in error message when GnuTLS fails
3220 to set them up, because the GnuTLS error message doesn't include the name
3221 of the failing file when there is a problem reading it.
3223 42. Allow both -bf and -bF in the same test run.
3225 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
3227 44. The "Exiscan patch" is now merged into the mainline Exim source.
3229 45. Sometimes the final signoff response after QUIT could fail to get
3230 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
3231 < 0 before doing a fflush(). This bug looks as though it goes back to the
3232 introduction of TLS in release 3.20, but "sometimes" must have been rare
3233 because the tests only now provoked it.
3235 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
3236 (this can affect the format of dates).
3238 47. exim_tidydb, when checking for the continued existence of a message for
3239 which it has found a message-specific retry record, was not finding
3240 messages that were in split spool directories. Consequently, it was
3241 deleting retry records that should have stayed in existence.
3243 48. Steve fixed some bugs in eximstats.
3245 49. The SPA authentication driver was not abandoning authentication and moving
3246 on to the next authenticator when an expansion was forced to fail,
3247 contradicting the general specification for all authenticators. Instead it
3248 was generating a temporary error. It now behaves as specified.
3250 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
3251 (the order specifies the preference for clients). The order is now AES256,
3252 AES128, 3DES, ARCFOUR128.
3254 51. Small patch to Sieve code - explicitly set From: when generating an
3257 52. Exim crashed if a remote delivery caused a very long error message to be
3258 recorded - for instance if somebody sent an entire SpamAssassin report back
3259 as a large number of 550 error lines. This bug was coincidentally fixed by
3260 increasing the size of one of Exim's internal buffers (big_buffer) that
3261 happened as part of the Exiscan merge. However, to be on the safe side, I
3262 have made the code more robust (and fixed the comments that describe what
3265 53. Now that there can be additional text after "Completed" in log lines (if
3266 the queue_time_overall log selector is set), a one-byte patch to exigrep
3267 was needed to allow it to recognize "Completed" as not the last thing in
3270 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
3271 patch that reportedly fixes this has been added. I am not expert enough to
3272 create a test for it. This is what the patch creator wrote:
3274 "I found a little strange behaviour of ldap code when working with
3275 Windows 2003 AD Domain, where users was placed in more than one
3276 Organization Units. When I tried to give exim partial DN, the exit code
3277 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
3278 But simultaneously result of request was absolutely normal ldap result,
3279 so I produce this patch..."
3281 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
3282 REFERENCE, so I have modified the code to exclude the patch when that macro
3285 55. Some experimental protocols are using DNS PTR records for new purposes. The
3286 keys for these records are domain names, not reversed IP addresses. The
3287 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
3288 leaves it alone. Component reversal etc. now happens only for IP addresses.
3291 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
3293 57. Double the size of the debug message buffer (to 2048) so that more of very
3294 long debug lines gets shown.
3296 58. The exicyclog utility now does better if the number of log files to keep
3297 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
3299 59. Two changes related to the smtp_active_hostname option:
3301 (1) $smtp_active_hostname is now available as a variable.
3302 (2) The default for smtp_banner uses $smtp_active_hostname instead
3303 of $primary_hostname.
3305 60. The host_aton() function is supposed to be passed a string that is known
3306 to be a valid IP address. However, in the case of IPv6 addresses, it was
3307 not checking this. This is a hostage to fortune. Exim now panics and dies
3308 if the condition is not met. A case was found where this could be provoked
3309 from a dnsdb PTR lookup with an IPv6 address that had more than 8
3310 components; fortuitously, this particular loophole had already been fixed
3311 by change 4.50/55 above.
3313 If there are any other similar loopholes, the new check in host_aton()
3314 itself should stop them being exploited. The report I received stated that
3315 data on the command line could provoke the exploit when Exim was running as
3316 exim, but did not say which command line option was involved. All I could
3317 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
3318 running as the user.
3321 61. There was a buffer overflow vulnerability in the SPA authentication code
3322 (which came originally from the Samba project). I have added a test to the
3323 spa_base64_to_bits() function which I hope fixes it.
3326 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
3327 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
3329 63. The daemon start-up calls getloadavg() while still root for those OS that
3330 need the first call to be done as root, but it missed one case: when
3331 deliver_queue_load_max is set with deliver_drop_privilege. This is
3332 necessary for the benefit of the queue runner, because there is no re-exec
3333 when deliver_drop_privilege is set.
3335 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
3336 This has been fixed.
3338 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
3339 was in use, was not putting the data itself into the right store pool;
3340 consequently, it could be overwritten for a subsequent message in the same
3341 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
3344 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
3346 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
3347 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
3348 the function were treating the return as a boolean value, which happened to
3349 work because 0=false and not-0=true, but is not correct code.
3351 68. The host_aton() function was not handling scoped IPv6 addresses (those
3352 with, for example, "%eth0" on the end) correctly.
3354 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
3355 negated items (that is, ~something) in unsigned ints. Some compilers
3356 apparently mutter when there is no cast.
3358 70. If an address verification called from an ACL failed, and did not produce a
3359 user-specific message (i.e. there was only a "system" message), nothing was
3360 put in $acl_verify_message. In this situation, it now puts the system
3363 71. Change 4.23/11 added synchronization checking at the start of an SMTP
3364 session; change 4.31/43 added the unwanted input to the log line - except
3365 that it did not do this in the start of session case. It now does.
3367 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
3368 This is wrong and can cause the other end to generate a synchronization
3369 error if it is another Exim or anything else that does the synchronization
3370 check. A QUIT command is no longer sent after a timeout.
3372 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
3373 during host lookups.
3375 74. The defer_ok option of callout verification was not working if it was used
3376 when verifying addresses in header lines, that is, for this case:
3378 verify = header_sender/callout=defer_ok
3380 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
3381 those file descriptors could be used for SMTP connections. If anything
3382 wrote to stderr (the example that came up was "warn" in embedded Perl), it
3383 could be sent to the SMTP client, causing chaos. The daemon now opens
3384 stdin, stdout, and stderr to /dev/null when it puts itself into the
3387 76. Arrange for output from Perl's "warn" command to be written to Exim's main
3388 log by default. The user can override this with suitable Perl magic.
3390 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
3391 the log message when discard triggers, was not working for the DATA ACL or
3392 for the non-SMTP ACL.
3394 78. Error message wording change in sieve.c.
3396 79. If smtp_accept_max_per_host was set, the number of connections could be
3397 restricted to fewer than expected, because the daemon was trying to set up
3398 a new connection before checking whether the processes handling previous
3399 connections had finished. The check for completed processes is now done
3400 earlier. On busy systems, this bug wouldn't be noticed because something
3401 else would have woken the daemon, and it would have reaped the completed
3404 80. If a message was submitted locally by a user whose login name contained one
3405 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
3406 It caused a spool format error. I have fixed the spool reading code. A
3407 related problem was that the "from" clause in the Received: line became
3408 illegal because of the space(s). It is now covered by ${quote_local_part.
3410 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
3413 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
3415 83. Patch from Sieve maintainer to fix unterminated string problem in
3416 "vacation" handling.
3418 84. Some minor changes to the Linux configuration files to help with other
3419 OS variants using glibc.
3421 85. One more patch for Sieve to update vacation handling to latest spec.
3424 ----------------------------------------------------
3425 See the note above about the 4.44 and 4.50 releases.
3426 ----------------------------------------------------
3432 1. Change 4.43/35 introduced a bug that caused file counts to be
3433 incorrectly computed when quota_filecount was set in an appendfile
3436 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
3437 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
3440 3. Give more explanation in the error message when the command for a transport
3441 filter fails to execute.
3443 4. There are several places where Exim runs a non-Exim command in a
3444 subprocess. The SIGUSR1 signal should be disabled for these processes. This
3445 was being done only for the command run by the queryprogram router. It is
3446 now done for all such subprocesses. The other cases are: ${run, transport
3447 filters, and the commands run by the lmtp and pipe transports.
3449 5. Some older OS have a limit of 256 on the maximum number of file
3450 descriptors. Exim was using setrlimit() to set 1000 as a large value
3451 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
3452 systems. I've change it so that if it can't get 1000, it tries for 256.
3454 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
3455 was an oversight, and furthermore, ever since the addition of extra
3456 controls (e.g. 4.43/32), the checks on when to allow different forms of
3457 "control" were broken. There should now be diagnostics for all cases when a
3458 control that does not make sense is encountered.
3460 7. $recipients is now available in the predata ACL (oversight).
3462 8. Tidy the search cache before the fork to do a delivery from a message
3463 received from the command line. Otherwise the child will trigger a lookup
3464 failure and thereby defer the delivery if it tries to use (for example) a
3465 cached ldap connection that the parent has called unbind on.
3467 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
3468 of $address_data from the recipient verification was clobbered by the
3469 sender verification.
3471 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
3472 was its contents. (It was OK if the option was not defined at all.)
3474 11. A "Completed" log line is now written for messages that are removed from
3475 the spool by the -Mrm option.
3477 12. $host_address is now set to the target address during the checking of
3478 ignore_target_hosts.
3480 13. When checking ignore_target_hosts for an ipliteral router, no host name was
3481 being passed; this would have caused $sender_host_name to have been used if
3482 matching the list had actually called for a host name (not very likely,
3483 since this list is usually IP addresses). A host name is now passed as
3486 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
3487 code that specifies a non-restarting handler (typically sigaction() in
3488 modern systems) in an attempt to fix a rare and obscure crash bug.
3490 15. Narrowed the window for a race in the daemon that could cause it to ignore
3491 SIGCHLD signals. This is not a major problem, because they are used only to
3492 wake it up if nothing else does.
3494 16. A malformed maildirsize file could cause Exim to calculate negative values
3495 for the mailbox size or file count. Odd effects could occur as a result.
3496 The maildirsize information is now recalculated if the size or filecount
3499 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
3500 support for a long time. Removed HAVE_SYS_VFS_H.
3502 18. Updated exipick to current release from John Jetmore.
3504 19. Allow an empty sender to be matched against a lookup in an address list.
3505 Previously the only cases considered were a regular expression, or an
3508 20. Exim went into a mad DNS lookup loop when doing a callout where the
3509 host was specified on the transport, if the DNS lookup yielded more than
3512 21. The RFC2047 encoding function was originally intended for short strings
3513 such as real names; it was not keeping to the 75-character limit for
3514 encoded words that the RFC imposes. It now respects the limit, and
3515 generates multiple encoded words if necessary. To be on the safe side, I
3516 have increased the buffer size for the ${rfc2047: expansion operator from
3519 22. Failure to deliver a bounce message always caused it to be frozen, even if
3520 there was an errors_to setting on the router. The errors_to setting is now
3523 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
3524 canonical form (fully expanded) before being placed in
3525 $sender_host_address.
3527 24. Updated eximstats to version 1.33
3529 25. Include certificate and key file names in error message when GnuTLS fails
3530 to set them up, because the GnuTLS error message doesn't include the name
3531 of the failing file when there is a problem reading it.
3533 26. Expand error message when OpenSSL has problems setting up cert/key files.
3536 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
3537 (this can affect the format of dates).
3539 28. exim_tidydb, when checking for the continued existence of a message for
3540 which it has found a message-specific retry record, was not finding
3541 messages that were in split spool directories. Consequently, it was
3542 deleting retry records that should have stayed in existence.
3544 29. eximstats updated to version 1.35
3545 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
3546 1.35 - bugfix such that pie charts by volume are generated correctly
3548 30. The SPA authentication driver was not abandoning authentication and moving
3549 on to the next authenticator when an expansion was forced to fail,
3550 contradicting the general specification for all authenticators. Instead it
3551 was generating a temporary error. It now behaves as specified.
3553 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
3554 (the order specifies the preference for clients). The order is now AES256,
3555 AES128, 3DES, ARCFOUR128.
3557 31. Small patch to Sieve code - explicitly set From: when generating an
3560 32. Exim crashed if a remote delivery caused a very long error message to be
3561 recorded - for instance if somebody sent an entire SpamAssassin report back
3562 as a large number of 550 error lines. This bug was coincidentally fixed by
3563 increasing the size of one of Exim's internal buffers (big_buffer) that
3564 happened as part of the Exiscan merge. However, to be on the safe side, I
3565 have made the code more robust (and fixed the comments that describe what
3568 33. Some experimental protocols are using DNS PTR records for new purposes. The
3569 keys for these records are domain names, not reversed IP addresses. The
3570 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
3571 leaves it alone. Component reversal etc. now happens only for IP addresses.
3574 34. The host_aton() function is supposed to be passed a string that is known
3575 to be a valid IP address. However, in the case of IPv6 addresses, it was
3576 not checking this. This is a hostage to fortune. Exim now panics and dies
3577 if the condition is not met. A case was found where this could be provoked
3578 from a dnsdb PTR lookup with an IPv6 address that had more than 8
3579 components; fortuitously, this particular loophole had already been fixed
3580 by change 4.50/55 or 4.44/33 above.
3582 If there are any other similar loopholes, the new check in host_aton()
3583 itself should stop them being exploited. The report I received stated that
3584 data on the command line could provoke the exploit when Exim was running as
3585 exim, but did not say which command line option was involved. All I could
3586 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
3587 running as the user.
3590 35. There was a buffer overflow vulnerability in the SPA authentication code
3591 (which came originally from the Samba project). I have added a test to the
3592 spa_base64_to_bits() function which I hope fixes it.
3595 36. The daemon start-up calls getloadavg() while still root for those OS that
3596 need the first call to be done as root, but it missed one case: when
3597 deliver_queue_load_max is set with deliver_drop_privilege. This is
3598 necessary for the benefit of the queue runner, because there is no re-exec
3599 when deliver_drop_privilege is set.
3601 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
3602 was in use, was not putting the data itself into the right store pool;
3603 consequently, it could be overwritten for a subsequent message in the same
3604 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
3607 38. Sometimes the final signoff response after QUIT could fail to get
3608 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
3609 < 0 before doing a fflush(). This bug looks as though it goes back to the
3610 introduction of TLS in release 3.20, but "sometimes" must have been rare
3611 because the tests only now provoked it.
3617 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
3618 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
3619 Now it returns an integer. A number of calls were still expecting a T/F
3620 return. Fortuitously, in all cases, the tests worked in OK situations,
3621 which is the norm. However, things would have gone wrong on any write
3622 failures on the smtp file descriptor. This function is used when sending
3623 messages over SMTP and also when doing verify callouts.
3625 2. When Exim is called to do synchronous delivery of a locally submitted
3626 message (the -odf or -odi options), it no longer closes stderr before doing
3629 3. Implemented the mua_wrapper option.
3631 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
3633 5. Implemented the functions header_remove(), header_testname(),
3634 header_add_at_position(), and receive_remove_recipient(), and exported them
3637 6. If an ACL "warn" statement specified the addition of headers, Exim already
3638 inserted X-ACL-Warn: at the start if there was no header name. However, it
3639 was not making this test for the second and subsequent header lines if
3640 there were newlines in the string. This meant that an invalid header could
3641 be inserted if Exim was badly configured.
3643 7. Allow an ACL "warn" statement to add header lines at the start or after all
3644 the Received: headers, as well as at the end.
3646 8. Added the rcpt_4xx retry error code.
3648 9. Added postmaster_mailfrom=xxx to callout verification option.
3650 10. Added mailfrom=xxxx to the callout verification option, for verify=
3653 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
3654 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
3656 12. Inserted some casts to stop certain compilers warning when using pointer
3657 differences as field lengths or precisions in printf-type calls (mostly
3658 affecting debugging statements).
3660 13. Added optional readline() support for -be (dynamically loaded).
3662 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
3663 same clock tick as a message's arrival, so that its received time was the
3664 same as the "first fail" time on the retry record, and that message
3665 remained on the queue past the ultimate address timeout, every queue runner
3666 would try a delivery (because it was past the ultimate address timeout) but
3667 after another failure, the ultimate address timeout, which should have then
3668 bounced the address, did not kick in. This was a "< instead of <=" error;
3669 in most cases the first failure would have been in the next clock tick
3670 after the received time, and all would be well.
3672 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
3673 being recognized when the domain list was tested by the match_domain
3674 condition in an expansion string.
3676 16. Added the ${str2b64: operator.
3678 17. Exim was always calling setrlimit() to set a large limit for the number of
3679 processes, without checking whether the existing limit was already
3680 adequate. (It did check for the limit on file descriptors.) Furthermore,
3681 errors from getrlimit() and setrlimit() were being ignored. Now they are
3682 logged to the main and panic logs, but Exim does carry on, to try to do its
3683 job under whatever limits there are.
3685 18. Imported PCRE 5.0.
3687 19. Trivial typo in log message " temporarily refused connection" (the leading
3690 20. If the log selector return_path_on_delivery was set and an address was
3691 redirected to /dev/null, the delivery process crashed because it assumed
3692 that a return path would always be set for a "successful" delivery. In this
3693 case, the whole delivery is bypassed as an optimization, and therefore no
3696 21. Internal re-arrangement: the function for sending a challenge and reading
3697 a response while authentication was assuming a zero-terminated challenge
3698 string. It's now changed to take a pointer and a length, to allow for
3699 binary data in such strings.
3701 22. Added the cyrus_sasl authenticator (code supplied by MBM).
3703 23. Exim was not respecting finduser_retries when seeking the login of the
3704 uid under which it was called; it was always trying 10 times. (The default
3705 setting of finduser_retries is zero.) Also, it was sleeping after the final
3706 failure, which is pointless.
3708 24. Implemented tls_on_connect_ports.
3710 25. Implemented acl_smtp_predata.
3712 26. If the domain in control=submission is set empty, Exim assumes that the
3713 authenticated id is a complete email address when it generates From: or
3714 Sender: header lines.
3716 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
3717 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
3718 chown and chgrp in /bin and hostname in /usr/bin.
3720 28. Exim was keeping the "process log" file open after each use, just as it
3721 does for the main log. This opens the possibility of it remaining open for
3722 long periods when the USR1 signal hits a daemon. Occasional processlog
3723 errors were reported, that could have been caused by this. Anyway, it seems
3724 much more sensible not to leave this file open at all, so that is what now
3727 29. The long-running daemon process does not normally write to the log once it
3728 has entered its main loop, and it closes the log before doing so. This is
3729 so that log files can straightforwardly be renamed and moved. However,
3730 there are a couple of unusual error situations where the daemon does write
3731 log entries, and I had neglected to close the log afterwards.
3733 30. The text of an SMTP error response that was received during a remote
3734 delivery was being truncated at 512 bytes. This is too short for some of
3735 the long messages that one sometimes sees. I've increased the limit to
3738 31. It is now possible to make retry rules that apply only when a message has a
3739 specific sender, in particular, an empty sender.
3741 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
3742 it possible to be selective about when SMTP synchronization is enforced.
3744 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
3746 32. Implemented hosts_connection_nolog.
3748 33. Added an ACL for QUIT.
3750 34. Setting "delay_warning=" to disable warnings was not working; it gave a
3753 35. Added mailbox_size and mailbox_filecount to appendfile.
3755 36. Added control = no_multiline_responses to ACLs.
3757 37. There was a bug in the logic of the code that waits for the clock to tick
3758 in the case where the clock went backwards by a substantial amount such
3759 that the microsecond fraction of "now" was more than the microsecond
3760 fraction of "then" (but the whole seconds number was less).
3762 38. Added support for the libradius Radius client library this is found on
3763 FreeBSD (previously only the radiusclient library was supported).
3769 1. When certain lookups returned multiple values in the form name=value, the
3770 quoting of the values was not always being done properly. Specifically:
3771 (a) If the value started with a double quote, but contained no whitespace,
3773 (b) If the value contained whitespace other than a space character (i.e.
3774 tabs or newlines or carriage returns) it was not quoted.
3775 This fix has been applied to the mysql and pgsql lookups by writing a
3776 separate quoting function and calling it from the lookup code. The fix
3777 should probably also be applied to nisplus, ibase and oracle lookups, but
3778 since I cannot test any of those, I have not disturbed their existing code.
3780 2. A hit in the callout cache for a specific address caused a log line with no
3781 reason for rejecting RCPT. Now it says "Previous (cached) callout
3782 verification failure".
3784 3. There was an off-by-one bug in the queryprogram router. An over-long
3785 return line was truncated at 256 instead of 255 characters, thereby
3786 overflowing its buffer with the terminating zero. As well as fixing this, I
3787 have increased the buffer size to 1024 (and made a note to document this).
3789 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
3790 when Exim is waiting for an SMTP response from a remote server, Exim
3791 restarts its select() call on the socket, thereby resetting its timeout.
3792 This is not a problem when such interrupts are rare. Somebody set up a cron
3793 job to run exiwhat every 2 minutes, which is less than the normal select()
3794 timeout (5 or 10 minutes). This meant that the select() timeout never
3795 kicked in because it was always reset. I have fixed this by comparing the
3796 time when an interrupt arrives with the time at the start of the first call
3797 to select(). If more time than the timeout has elapsed, the interrupt is
3798 treated as a timeout.
3800 5. Some internal re-factoring in preparation for the addition of Sieve
3801 extensions (by MH). In particular, the "personal" test is moved to a
3802 separate function, and given an option for scanning Cc: and Bcc: (which is
3803 not set for Exim filters).
3805 6. When Exim created an email address using the login of the caller as the
3806 local part (e.g. when creating a From: or Sender: header line), it was not
3807 quoting the local part when it contained special characters such as @.
3809 7. Installed new OpenBSD configuration files.
3811 8. Reworded some messages for syntax errors in "and" and "or" conditions to
3812 try to make them clearer.
3814 9. Callout options, other than the timeout value, were being ignored when
3815 verifying sender addresses in header lines. For example, when using
3817 verify = header_sender/callout=no_cache
3819 the cache was (incorrectly) being used.
3821 10. Added a missing instance of ${EXE} to the exim_install script; this affects
3822 only the Cygwin environment.
3824 11. When return_path_on_delivery was set as a log selector, if different remote
3825 addresses in the same message used different return paths and parallel
3826 remote delivery occurred, the wrong values would sometimes be logged.
3827 (Whenever a remote delivery process finished, the return path value from
3828 the most recently started remote delivery process was logged.)
3830 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
3831 lines when AUTH and/or TLS are in use. This is the "received protocol"
3832 field. Exim used to use "asmtp" for authenticated SMTP, without any
3833 indication (in the protocol name) for TLS use. Now it follows the RFC and
3834 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
3835 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
3836 names appear in log lines as well as in Received: header lines.
3838 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
3839 extensions, and comparison tests, and to fix some bugs.
3841 14. Changes to the "personal" filter test:
3843 (1) The test was buggy in that it was just doing the equivalent of
3844 "contains" tests on header lines. For example, if a user's address was
3845 anne@some.where, the "personal" test would incorrectly be true for
3847 To: susanne@some.where
3849 This test is now done by extracting each address from the header in turn,
3850 and checking the entire address. Other tests that are part of "personal"
3851 are now done using regular expressions (for example, to check local parts
3852 of addresses in From: header lines).
3854 (2) The list of non-personal local parts in From: addresses has been
3855 extended to include "listserv", "majordomo", "*-request", and "owner-*",
3856 taken from the Sieve specification recommendations.
3858 (3) If the message contains any header line starting with "List-" it is
3859 treated as non-personal.
3861 (4) The test for "circular" in the Subject: header line has been removed
3862 because it now seems ill-conceived.
3864 15. Minor typos in src/EDITME comments corrected.
3866 16. Installed latest exipick from John Jetmore.
3868 17. If headers_add on a router specified a text string that was too long for
3869 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
3870 of string_sprintf() is now avoided.
3872 18. $message_body_size was not set (it was always zero) when running the DATA
3873 ACL and the local_scan() function.
3875 19. For the "mail" command in an Exim filter, no default was being set for
3876 the once_repeat time, causing a random time value to be used if "once" was
3877 specified. (If the value happened to be <= 0, no repeat happened.) The
3878 default is now 0s, meaning "never repeat". The "vacation" command was OK
3879 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
3880 (I found it when inspecting the code).
3882 20. There is now an overall timeout for performing a callout verification. It
3883 defaults to 4 times the callout timeout, which applies to individual SMTP
3884 commands during the callout. The overall timeout applies when there is more
3885 than one host that can be tried. The timeout is checked before trying the
3886 next host. This prevents very long delays if there are a large number of
3887 hosts and all are timing out (e.g. when the network connections are timing
3888 out). The value of the overall timeout can be changed by specifying an
3889 additional sub-option for "callout", called "maxwait". For example:
3891 verify = sender/callout=5s,maxwait=20s
3893 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
3894 to the end before writing, but this should make it even safer).
3896 22. Exim was forgetting that it had advertised PIPELINING for the second and
3897 subsequent messages on an SMTP connection. It was also not resetting its
3898 memory on STARTTLS and an internal HELO.
3900 23. When Exim logs an SMTP synchronization error within a session, it now
3901 records whether PIPELINING has been advertised or not.
3903 24. Added 3 instances of "(long int)" casts to time_t variables that were being
3904 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
3905 rather than long int.
3907 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
3909 26. Added the never_mail option to autoreply.
3915 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
3916 crash if the getsockname() call failed; this can happen if a connection is
3917 closed very soon after it is established. The problem was simply in the
3918 order in which certain operations were done, causing Exim to try to write
3919 to the SMTP stream before it had set up the file descriptor. The bug has
3920 been fixed by making things happen in the correct order.
3926 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
3927 before the connection was closed, thus losing the rejection response.
3929 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
3930 some early Solaris releases, but causes trouble in current releases where
3931 socklen_t is defined.
3933 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
3936 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
3939 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
3940 that releasing the top of it at the end releases what was used for sub-
3941 expansions (unless the block got too big). However, discard this block if
3942 the first thing is a variable or header, so that we can use its block when
3943 it is dynamic (useful for very large $message_headers, for example).
3945 6. Lookups now cache *every* query, not just the most recent. A new, separate
3946 store pool is used for this. It can be recovered when all lookup caches are
3947 flushed. Lookups now release memory at the end of their result strings.
3948 This has involved some general refactoring of the lookup sources.
3950 7. Some code has been added to the store_xxx() functions to reduce the amount
3951 of flapping under certain conditions.
3953 8. log_incoming_interface used to affect only the <= reception log lines. Now
3954 it causes the local interface and port to be added to several more SMTP log
3955 lines, for example "SMTP connection from", and rejection lines.
3957 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
3959 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
3961 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
3962 could be overwritten at the end of the current message (or the start of a
3963 new message if it was set in a HELO ACL). The value is now preserved for
3964 the duration of the SMTP connection.
3966 12. If a transport had a headers_rewrite setting, and a matching header line
3967 contained an unqualified address, that address was qualified, even if it
3968 did not match any rewriting rules. The underlying bug was that the values
3969 of the flags that permit the existence of unqualified sender and recipient
3970 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
3971 non-local messages, and by -bnq for local messages) were not being
3972 preserved with the message after it was received.
3974 13. When Exim was logging an SMTP synchronization error, it could sometimes log
3975 "next input=" as part of the text comprising the host identity instead of
3976 the correct text. The code was using the same buffer for two different
3977 strings. However, depending on which order the printing function evaluated
3978 its arguments, the bug did not always show up. Under Linux, for example, my
3979 test suite worked just fine.
3981 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
3982 doesn't work with some older versions of Perl. It has been changed to "my",
3983 which in any case is probably the better facility to use.
3985 15. A really picky compiler found some instances of statements for creating
3986 error messages that either had too many or two few arguments for the format
3989 16. The size of the buffer for calls to the DNS resolver has been increased
3990 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
3991 for addresses that have a lot of PTR records. This alleviates a problem; it
3992 does not fully solve it.
3994 17. A dnsdb lookup for PTR records that receives more data than will fit in the
3995 buffer now truncates the list and logs the incident, which is the same
3996 action as happens when Exim is looking up a host name and its aliases.
3997 Previously in this situation something unpredictable would happen;
3998 sometimes it was "internal error: store_reset failed".
4000 18. If a server dropped the connection unexpectedly when an Exim client was
4001 using GnuTLS and trying to read a response, the client delivery process
4002 crashed while trying to generate an error log message.
4004 19. If a "warn" verb in an ACL added multiple headers to a message in a single
4005 string, for example:
4007 warn message = H1: something\nH2: something
4009 the text was added as a single header line from Exim's point of view
4010 though it ended up OK in the delivered message. However, searching for the
4011 second and subsequent header lines using $h_h2: did not work. This has been
4012 fixed. Similarly, if a system filter added multiple headers in this way,
4013 the routers could not see them.
4015 20. Expanded the error message when iplsearch is called with an invalid key to
4016 suggest using net-iplsearch in a host list.
4018 21. When running tests using -bh, any delays imposed by "delay" modifiers in
4019 ACLs are no longer actually imposed (and a message to that effect is
4022 22. If a "gecos" field in a passwd entry contained escaped characters, in
4023 particular, if it contained a \" sequence, Exim got it wrong when building
4024 a From: or a Sender: header from that name. A second bug also caused
4025 incorrect handling when an unquoted " was present following a character
4026 that needed quoting.
4028 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
4029 was not being matched caselessly.
4031 24. Arranged for all hyphens in the exim.8 source to be escaped with
4034 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
4035 properly. Recipient callout cache records were still being keyed to include
4036 the sender, even when use_sender was set false. This led to far more
4037 callouts that were necessary. The sender is no longer included in the key
4038 when use_sender is false.
4040 26. Added "control = submission" modifier to ACLs.
4042 27. Added the ${base62d: operator to decode base 62 numbers.
4044 28. dnsdb lookups can now access SRV records.
4046 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
4047 the configuration file.
4049 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
4050 (-v) mode. This makes the output for a verbose queue run more intelligible.
4052 31. Added a use_postmaster feature to recipient callouts.
4054 32. Added the $body_zerocount variable, containing the number of binary zero
4055 bytes in the message body.
4057 33. The time of last modification of the "new" subdirectory is now used as the
4058 "mailbox time last read" when there is a quota error for a maildir
4061 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
4063 35. Added +ignore_unknown as a special item in host lists.
4065 36. Code for decoding IPv6 addresses in host lists is now included, even if
4066 IPv6 support is not being compiled. This fixes a bug in which an IPv6
4067 address was recognized as an IP address, but was then not correctly decoded
4068 into binary, causing unexpected and incorrect effects when compared with
4075 1. Very minor rewording of debugging text in manualroute to say "list of
4076 hosts" instead of "hostlist".
4078 2. If verify=header_syntax was set, and a header line with an unqualified
4079 address (no domain) and a large number of spaces between the end of the
4080 name and the colon was received, the reception process suffered a buffer
4081 overflow, and (when I tested it) crashed. This was caused by some obsolete
4082 code that should have been removed. The fix is to remove it!
4084 3. When running in the test harness, delay a bit after writing a bounce
4085 message to get a bit more predictability in the log output.
4087 4. Added a call to search_tidyup() just before forking a reception process. In
4088 theory, someone could use a lookup in the expansion of smtp_accept_max_
4089 per_host which, without the tidyup, could leave open a database connection.
4091 5. Added the variables $recipient_data and $sender_data which get set from a
4092 lookup success in an ACL "recipients" or "senders" condition, or a router
4093 "senders" option, similar to $domain_data and $local_part_data.
4095 6. Moved the writing of debug_print from before to after the "senders" test
4098 7. Change 4.31/66 (moving the time when the Received: is generated) caused
4099 problems for message scanning, either using a data ACL, or using
4100 local_scan() because the Received: header was not generated till after they
4101 were called (in order to set the time as the time of reception completion).
4102 I have revised the way this works. The header is now generated after the
4103 body is received, but before the ACL or local_scan() are called. After they
4104 are run, the timestamp in the header is updated.
4110 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
4111 before starting a queue runner without re-exec. This happened only when
4112 deliver_drop_privilege was set or when the Exim user was set to root. The
4113 effect of the bug was that timeouts during subsequent deliveries caused
4114 crashes instead of being properly handled. The handler is now left at its
4115 default (and expected) setting.
4117 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
4118 message, again when deliver_drop_privilege is set or Exim is run as root.
4119 The bug described in (1) was not present in this case, but the tidying up
4120 of the other signals was missing. I have made the two cases consistent.
4122 3. The ignore_target_hosts setting on a manualroute router was being ignored
4123 for hosts that were looked up using the /MX notation.
4125 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
4128 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
4129 operated on the sender address. After changing the $sender_address to <>
4130 for the sender address verify, Exim was re-instated it as the original
4131 (before rewriting) address, but remembering that it had rewritten it, so it
4132 wasn't rewriting it again. This bug also had the effect of breaking the
4133 sender address verification caching when the sender address was rewritten.
4135 6. The ignore_target_hosts option was being ignored by the ipliteral router.
4136 This has been changed so that if the ip literal address matches
4137 ignore_target_hosts, the router declines.
4139 7. Added expansion conditions match_domain, match_address, and match_local_
4140 part (NOT match_host).
4142 8. The placeholder for the Received: header didn't have a length field set.
4144 9. Added code to Exim itself and to exim_lock to test for a specific race
4145 condition that could lead to file corruption when using MBX delivery. The
4146 issue is with the lockfile that is created in /tmp. If this file is removed
4147 after a process has opened it but before that process has acquired a lock,
4148 there is the potential for a second process to recreate the file and also
4149 acquire a lock. This could lead to two Exim processes writing to the file
4150 at the same time. The added code performs the same test as UW imapd; it
4151 checks after acquiring the lock that its file descriptor still refers to
4152 the same named file.
4154 10. The buffer for building added header lines was of fixed size, 8192 bytes.
4155 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
4158 11. Added the smtp_active_hostname option. If used, this will typically be made
4159 to depend on the incoming interface address. Because $interface_address is
4160 not set up until the daemon has forked a reception process, error responses
4161 that can happen earlier (such as "too many connections") no longer contain
4164 12. If an expansion in a condition on a "warn" statement fails because a lookup
4165 defers, the "warn" statement is abandoned, and the next ACL statement is
4166 processed. Previously this caused the whole ACL to be aborted.
4168 13. Added the iplsearch lookup type.
4170 14. Added ident_timeout as a log selector.
4172 15. Added tls_certificate_verified as a log selector.
4174 16. Added a global option tls_require_ciphers (compare the smtp transport
4175 option of the same name). This controls incoming TLS connections.
4177 17. I finally figured out how to make tls_require_ciphers do a similar thing
4178 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
4179 before starting the TLS session.
4181 18. Tabs are now shown as \t in -bP output.
4183 19. If the log selector return_path_on_delivery was set, Exim crashed when
4184 bouncing a message because it had too many Received: header lines.
4186 20. If two routers both had headers_remove settings, and the first one included
4187 a superfluous trailing colon, the final name in the first list and the
4188 first name in the second list were incorrectly joined into one item (with a
4189 colon in the middle).
4195 1. Added -C and -D options to the exinext utility, mainly to make it easier
4196 to include in the automated testing, but these could be helpful when
4197 multiple configurations are in use.
4199 2. The exinext utility was not formatting the output nicely when there was
4200 an alternate port involved in the retry record key, nor when there was a
4201 message id as well (for retries that were specific to a specific message
4202 and a specific host). It was also confused by IPv6 addresses, because of
4203 the additional colons they contain. I have fixed the IPv4 problem, and
4204 patched it up to do a reasonable job for IPv6.
4206 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
4207 delivery, the log line now contains "pipelined" if PIPELINING was used.
4209 4. An SMTP transport process used to panic and die if the bind() call to set
4210 an explicit outgoing interface failed. This has been changed; it is now
4211 treated in the same way as a connect() failure.
4213 5. A reference to $sender_host_name in the part of a conditional expansion
4214 that was being skipped was still causing a DNS lookup. This no longer
4217 6. The def: expansion condition was not recognizing references to header lines
4218 that used bh_ and bheader_.
4220 7. Added the _cache feature to named lists.
4222 8. The code for checking quota_filecount in the appendfile transport was
4223 allowing one more file than it should have been.
4225 9. For compatibility with Sendmail, the command line option
4233 and sets the incoming protocol and host name (for trusted callers). The
4234 host name and its colon can be omitted when only the protocol is to be set.
4235 Note the Exim already has two private options, -pd and -ps, that refer to
4236 embedded Perl. It is therefore impossible to set a protocol value of "d" or
4237 "s", but I don't think that's a major issue.
4239 10. A number of refactoring changes to the code, none of which should affect
4242 (a) The number of logging options was getting close to filling up the
4243 32-bit word that was used as a bit map. I have split them into two classes:
4244 those that are passed in the argument to log_write(), and those that are
4245 only ever tested independently outside of that function. These are now in
4246 separate 32-bit words, so there is plenty of room for expansion again.
4247 There is no change in the user interface or the logging behaviour.
4249 (b) When building, for example, log lines, the code previously used a
4250 macro that called string_cat() twice, in order to add two strings. This is
4251 not really sufficiently general. Furthermore, there was one instance where
4252 it was actually wrong because one of the argument was used twice, and in
4253 one call a function was used. (As it happened, calling the function twice
4254 did not affect the overall behaviour.) The macro has been replaced by a
4255 function that can join an arbitrary number of extra strings onto a growing
4258 (c) The code for expansion conditions now uses a table and a binary chop
4259 instead of a serial search (which was left over from when there were very
4260 few conditions). Also, it now recognizes conditions like "pam" even when
4261 the relevant support is not compiled in: a suitably worded error message is
4262 given if an attempt is made to use such a condition.
4264 11. Added ${time_interval:xxxxx}.
4266 12. A bug was causing one of the ddress fields not to be passed back correctly
4267 from remote delivery subprocesses. The field in question was not being
4268 subsequently used, so this caused to problems in practice.
4270 13. Added new log selectors queue_time and deliver_time.
4272 14. Might have fixed a bug in maildirsizefile handling that threw up
4273 "unexpected character" debug warnings, and recalculated the data
4274 unnecessarily. In any case, I expanded the warning message to give more
4277 15. Added the message "Restricted characters in address" to the statements in
4278 the default ACL that block characters like @ and % in local parts.
4280 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
4281 Three changes have been made:
4283 (a) There was a serious bug; a negative response to MAIL caused the whole
4284 recipient domain to be cached as invalid, thereby blocking all messages
4285 to all local parts at the same domain, from all senders. This bug has
4286 been fixed. The domain is no longer cached after a negative response to
4287 MAIL if the sender used is not empty.
4289 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
4292 (c) A new callout option, "use_sender" has been added for people who want
4293 the modified behaviour.
4299 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
4302 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
4303 indeed breaks things for older releases.
4305 3. Added additional logging to the case where there is a problem reading data
4306 from a filter that is running in a subprocess using a pipe, in order to
4307 try to track down a specific problem.
4309 4. Testing facility fudge: when running in the test harness and attempting
4310 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
4311 getting "No route to host". Convert this to a timeout.
4313 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
4316 6. Some OS don't have socklen_t but use size_t instead. This affects the
4317 fifth argument of getsockopt() amongst other things. This is now
4318 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
4319 can be set for individual OS. I have set it for SunOS5, OSF1, and
4320 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
4321 some earlier ones do not.
4323 7. Change 4.30/15 was not doing the test caselessly.
4325 8. The standard form for an IPv6 address literal was being rejected by address
4326 parsing in, for example, MAIL and RCPT commands. An example of this kind of
4327 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
4328 this, as well as the form without the "IPv6" on the front (but only when
4329 address literals are enabled, of course).
4331 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
4333 10. Exim crashed if a message with an empty sender address specified by -f
4334 encountered a router with an errors_to setting. This could be provoked only
4335 by a command such as
4339 where an empty string was supplied; "<>" did not hit this bug.
4341 11. Installed PCRE release 4.5.
4343 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
4344 remained set. It is now erased.
4346 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
4347 times from message ids (which are base 36 rather than the normal 62).
4349 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
4350 were being counted as actual protocol errors, and logged if the log
4351 selector +smtp_protocol_error was set. One cannot be perfect in this test,
4352 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
4353 and DATA following a set of rejected RCPTs do not count as protocol errors.
4354 In other words, Exim assumes they were pipelined, though this may not
4355 actually be the case. Of course, in all cases the client gets an
4356 appropriate error code.
4358 15. If a lookup fails in an ACL condition, a message about the failure may
4359 be available; it is used if testing the ACL cannot continue, because most
4360 such messages specify what the cause of the deferral is. However, some
4361 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
4362 that caused an old message to be retained and used if a later statement
4363 caused a defer, replacing the real cause of the deferral.
4365 16. If an IP address had so many PTR records that the DNS lookup buffer
4366 was not large enough to hold them, Exim could crash while trying to process
4367 the truncated data. It now detects and logs this case.
4369 17. Further to 4.21/58, another change has been made: if (and only if) the
4370 first line of a message (the first header line) ends with CRLF, a bare LF
4371 in a subsequent header line has a space inserted after it, so as not to
4372 terminate the header.
4374 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
4375 unnecessarily, used atoi() instead of strtol(), and didn't check the
4376 termination when getting file sizes from file names by regex.
4378 19. Completely re-implemented the support for maildirsize files, in the light
4379 of a number of problems with the previous contributed implementation
4380 (4.30/29). In particular:
4382 . If the quota is zero, the maildirsize file is maintained, but no quota is
4385 . If the maildir directory does not exist, it is created before any attempt
4386 to write a maildirsize file.
4388 . The quota value in the file is just a cache; if the quota is changed in
4389 the transport, the new value overrides.
4391 . A regular expression is available for excluding directories from the
4394 20. The autoreply transport checks the characters in options that define the
4395 message's headers; it allows continued headers, but it was checking with
4396 isspace() after an embedded newline instead of explicitly looking for a
4399 21. If all the "regular" hosts to which an address was routed had passed their
4400 expiry times, and had not reached their retry times, the address was
4401 bounced, even if fallback hosts were defined. Now Exim should go on to try
4404 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
4405 equivalent code in the SMTP transport. Some hosts send humungous responses
4406 to HELO/EHLO, more than 1024 it seems.
4408 23. Refactoring: code in filter.c used (void *) for "any old type" but this
4409 gives compiler warnings in some environments. I've now done it "properly",
4412 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
4413 (because of problems with the built-in one) was declared to return uschar *
4414 instead of char *, causing compiler failure.
4416 25. Fixed a file descriptor leak when processing alias/forward files.
4418 26. Fixed a minor format string issue in dbfn.c.
4420 27. Typo in exim.c: ("dmbnz" for "dbmnz").
4422 28. If a filter file refered to $h_xxx or $message_headers, and the headers
4423 contained RFC 2047 "words", Exim's memory could, under certain conditions,
4426 29. When a sender address is verified, it is cached, to save repeating the test
4427 when there is more than one recipient in a message. However, when the
4428 verification involves a callout, it is possible for different callout
4429 options to be set for different recipients. It is too complicated to keep
4430 track of this in the cache, so now Exim always runs a verification when a
4431 callout is required, relying on the callout cache for the optimization.
4432 The overhead is duplication of the address routing, but this should not be
4435 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
4436 to be verified with callout=postmaster, and the main callout worked but the
4437 postmaster check failed, the verification correctly failed. However, if a
4438 subsequent RCPT command asked for sender verification *without* the
4439 postmaster check, incorrect caching caused this verification also to fail,
4442 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
4443 it was not caching the DNS options (qualify_single, search_parents) that
4444 were used when the lookup failed. A subsequent lookup with different
4445 options therefore always gave the same answer, though there were cases
4446 where it should not have. (Example: a "domains = !$mx_any" option on a
4447 dnslookup router: the "domains" option is always processed without any
4448 widening, but the router might have qualify_single set.) Now Exim uses the
4449 cached value only when the same options are set.
4451 32. Added John Jetmore's "exipick" utility to the distribution.
4453 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
4454 than a timeout (e.g. a certificate is required, and is not provided), an
4455 Exim server now closes the connection immediately. Previously it waited for
4456 the client to close - but if the client is SSL, it seems that they each
4457 wait for each other, leading to a delay before one of them times out.
4459 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
4460 maintained 0.8.x compatibility because I don't think many are using it, and
4461 it is clearly obsolete.
4463 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
4466 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
4467 client certificate was expired. A simple patch fixes this, though I don't
4468 understand the full logic of why the verify callback is called multiple
4471 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
4472 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
4473 which causes problems with some clients (such as the Certicom SSL Plus
4474 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
4475 disables the coutermeasure allowing Eudora to connect."
4477 38. Exim was not checking that a write() to a log file succeeded. This could
4478 lead to Bad Things if a log got too big, in particular if it hit a file
4479 size limit. Exim now panics and dies if it cannot write to a log file, just
4480 as it does if it cannot open a log file.
4482 39. Modified OS/Makefile-Linux so that it now contains
4484 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
4486 The two -D definitions ensure that Exim is compiled with large file
4487 support, which makes it possible to handle log files that are bigger than
4490 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
4491 instance) a domain was checked against a named list that involved a lookup,
4492 causing $domain_data to be set, then another domain was checked against the
4493 same list, then the first domain was re-checked, the value of $domain_data
4494 after the final check could be wrong. In particular, if the second check
4495 failed, it could be set empty. This bug probably also applied to
4498 41. The strip_trailing_dot option was not being applied to the address given
4499 with the -f command-line option.
4501 42. The code for reading a message's header from the spool was incrementing
4502 $received_count, but never initializing it. This meant that the value was
4503 incorrect (doubled) while delivering a message in the same process in which
4504 it was received. In the most common configuration of Exim, this never
4505 happens - a fresh exec is done - but it can happen when
4506 deliver_drop_privilege is set.
4508 43. When Exim logs an SMTP synchronization error - client data sent too soon -
4509 it now includes up to 150 characters of the unexpected data in the log
4512 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
4513 and building data strings. The size of both of these buffers was 10 000
4514 bytes - far larger than anybody would *ever* want, thought I. Needless to
4515 say, somebody hit the limit. I have increased the maximum line length to
4516 20 000 and the maximum data length of concatenated lines to 100 000. I have
4517 also fixed two bugs, because there was no checking on these buffers. Tsk,
4518 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
4519 buffer is too small.
4521 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
4522 lsearch lookups. Now it does.
4524 46. When parsing a route_list item in a manualroute router, a fixed-length
4525 buffer was used for the list of hosts. I made this 1024 bytes long,
4526 thinking that nobody would ever have a list of hosts that long. Wrong.
4527 Somebody had a whole pile of complicated expansion conditions, and the
4528 string was silently truncated, leading to an expansion error. It turns out
4529 that it is easier to change to an unlimited length (owing to other changes
4530 that have happened since this code was originally written) than to build
4531 structure for giving a limitation error. The length of the item that
4532 expands into the list of hosts is now unlimited.
4534 47. The lsearch lookup could not handle data where the length of text line was
4535 more than 4095 characters. Such lines were truncated, leading to shortened
4536 data being returned. It should now handle lines of any length.
4538 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
4539 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
4542 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
4543 replacing strings such as BIN_DIRECTORY in a source file: the replacement
4544 no longer happens in comment lines. A list of replacements is now placed
4545 at the head of all of the source files, except those whose only change is
4546 to replace PERL_COMMAND in the very first #! line.
4548 50. Replaced the slow insertion sort in queue.c, for sorting the list of
4549 messages on the queue, with a bottom-up merge sort, using code contributed
4550 by Michael Haardt. This should make operations like -bp somewhat faster on
4551 large queues. It won't affect queue runners, except when queue_run_in_order
4554 51. Installed eximstats 1.31 in the distribution.
4556 52. Added support for SRV lookups to the dnslookup router.
4558 53. If an ACL referred to $message_body or $message_body_end, the value was not
4559 reset for any messages that followed in the same SMTP session.
4561 54. The store-handling optimization for building very long strings was not
4562 differentiating between the different store pools. I don't think this
4563 actually made any difference in practice, but I've tidied it.
4565 55. While running the routers to verify a sender address, $sender_address
4566 was still set to the sender address. This is wrong, because when routing to
4567 send a bounce to the sender, it would be empty. Therefore, I have changed
4568 it so that, while verifying a sender address, $sender_address is set to <>.
4569 (There is no change to what happens when verifying a recipient address.)
4571 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
4572 target A or AAAA records (if not already returned) without resetting the
4573 qualify_single or search_parents options of the DNS resolver. These are
4574 inappropriate in this case because the targets of MX and SRV records must
4575 be FQDNs. A broken DNS record could cause trouble if it happened to have a
4576 target that, when qualified, matched something in the local domain. These
4577 two options are now turned off when doing these lookups.
4579 57. It seems that at least some releases of Reiserfs (which does not have the
4580 concept of a fixed number of inodes) returns zero and not -1 for the
4581 number of available inodes. This interacted badly with check_spool_inodes,
4582 which assumed that -1 was the "no such thing" setting. What I have done is
4583 to check that the total number of inodes is greater than zero before doing
4584 the test of how many are available.
4586 58. When a "warn" ACL statement has a log_message modifier, the message is
4587 remembered, and not repeated. This is to avoid a lot of repetition when a
4588 message has many recipients that cause the same warning to be written.
4589 Howewer, Exim was preserving the list of already written lines for an
4590 entire SMTP session, which doesn't seem right. The memory is now reset if a
4591 new message is started.
4593 59. The "rewrite" debugging flag was not showing the result of rewriting in the
4594 debugging output unless log_rewrite was also set.
4596 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
4597 of (int)(handle) when we know that handle contains (void *)(-1).
4599 61. The Exim daemon panic-logs an error return when it closes the incoming
4600 connection. However "connection reset by peer" seems to be common, and
4601 isn't really an error worthy of noting specially, so that particular error
4604 62. When Exim is trying to find all the local interfaces, it used to panic and
4605 die if the ioctl to get the interface flags failed. However, it seems that
4606 on at least one OS (Solaris 9) it is possible to have an interface that is
4607 included in the list of interfaces, but for which you get a failure error
4608 for this call. This happens when the interface is not "plumbed" into a
4609 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
4610 failure of the "get flags" call assumes that the interface is down.
4612 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
4613 makes life easier for people who are doing arithmetic on fields extracted
4614 from dates, where you often get leading zeros that should not be
4615 interpreted as octal.
4617 64. Added qualify_domain to the redirect router, to override the global
4620 65. If a pathologically long header line contained very many addresses (the
4621 report of this problem mentioned 10 000) and each of them was rewritten,
4622 Exim could use up a very large amount of memory. (It kept on making new
4623 copies of the header line as it rewrote, and never released the old ones.)
4624 At the expense of a bit more processing, the header rewriting function has
4625 been changed so that it no longer eats memory in this way.
4627 66. The generation of the Received: header has been moved from the time that a
4628 message starts to be received, to the time that it finishes. The timestamp
4629 in the Received: header should now be very close to that of the <= log
4630 line. There are two side-effects of this change:
4632 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
4633 logged header lines no longer include the local Received: line, because
4634 it has not yet been created. The same applies to a copy of the message
4635 that is returned to a non-SMTP sender when a message is rejected.
4637 (b) When a filter file is tested using -bf, no additional Received: header
4638 is added to the test message. After some thought, I decided that this
4641 This change does not affect the value of $received_for. It is still set
4642 after address rewriting, but before local_scan() is called.
4644 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
4646 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
4647 gave an unhelpful panic error message, and a defer error. I have managed to
4648 change this behaviour so that it now rejects any supplied certificate,
4649 which seems right, as the list of acceptable certificates is empty.
4651 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
4652 gave an unhelpful defer error. I have not managed to make this reject any
4653 supplied certificates, but the error message it gives is "no certificate
4654 supplied", which is not helpful.
4656 70. exigrep's output now also includes lines that are not associated with any
4657 message, but which match the given pattern. Implemented by a patch from
4658 Martin Sluka, which also tidied up the Perl a bit.
4660 71. Recipient callout verification, like sender verification, was using <> in
4661 the MAIL FROM command. This isn't really the right thing, since the actual
4662 sender may affect whether the remote host accepts the recipient or not. I
4663 have changed it to use the actual sender in the callout; this means that
4664 the cache record is now keyed on a recipient/sender pair, not just the
4665 recipient address. There doesn't seem to be a real danger of callout loops,
4666 since a callout by the remote host to check the sender would use <>.
4667 [SEE ABOVE: changed after hitting problems.]
4669 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
4670 temporary errors. However, in the case of such a code being given after
4671 the end of a data transmission (i.e. after ".") Exim was failing to write
4672 a retry record for the message. (Yes, there was some broken host that was
4673 actually sending 8xx at this point.)
4675 73. An unknown lookup type in a host list could cause Exim to panic-die when
4676 the list was checked. (An example that provoked this was putting <; in the
4677 middle of a list instead of at the start.) If this happened during a DATA
4678 ACL check, a -D file could be left lying around. This kind of configuration
4679 error no longer causes Exim to die; instead it causes a defer errror. The
4680 incident is still logged to the main and panic logs.
4682 74. Buglet left over from Exim 3 conversion. The message "too many messages
4683 in one connection" was written to the rejectlog but not the mainlog, except
4684 when address rewriting (yes!) was being logged.
4686 75. Added write_rejectlog option.
4688 76. When a system filter was run not as root (that is, when system_filter_user
4689 was set), the values of the $n variables were not being returned to the
4690 main process; thus, they were not subsequently available in the $sn
4693 77. Added +return_path_on_delivery log selector.
4695 78. A connection timeout was being treated differently from recipients deferred
4696 when testing hosts_max_try with a message that was older than the host's
4697 retry timeout. (The host should not be counted, thus allowing all hosts to
4698 be tried at least once before bouncing.) This may have been the cause of an
4699 occasionally reported bug whereby a message would remain on the queue
4700 longer than the retry timeout, but would be bounced if a delivery was
4701 forced. I say "may" because I never totally pinned down the problem;
4702 setting up timeout/retry tests is difficult. See also the next item.
4704 79. The ultimate address timeout was not being applied to errors that involved
4705 a combination of host plus message (for example, a timeout on a MAIL
4706 command). When an address resolved to a number of possible hosts, and they
4707 were not all tried for each delivery (e.g. because of hosts_max_try), a
4708 message could remain on the queue longer than the retry timeout.
4710 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
4713 81. Fixed an obscure SMTP outgoing bug which required at least the following
4714 conditions: (a) there was another message waiting for the same server;
4715 (b) the server returned 5xx to all RCPT commands in the first message so
4716 that the message was not completed; (c) the server dropped the connection
4717 or gave a negative response to the RSET that Exim sends to abort the
4718 transaction. The observed case was a dropped connection after DATA that had
4719 been sent in pipelining mode. That is, the server had advertised PIPELINING
4720 but was not implementing it correctly. The effect of the bug was incorrect
4721 behaviour, such as trying another host, and this could lead to a crash.
4727 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
4728 and daemon.c were passed as pointers to ints; they should have been
4729 pointers to socklen_t variables (which are typically unsigned ints).
4731 2. Some signed/unsigned type warnings in the os.c file for Linux have been
4734 3. Fixed a really odd bug that affected only the testing scheme; patching a
4735 certain fixed string in the binary changed the value of another string that
4736 happened to be identical to the end of the original first string.
4738 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
4739 name", it returns that address as the IP address. On some operating
4740 systems (e.g. Solaris), it also passes back the IP address string as the
4741 "host name". However, on others (e.g. Linux), it passes back an empty
4742 string. Exim wasn't checking for this, and was changing the host name to an
4743 empty string, assuming it had been canonicized.
4745 5. Although rare, it is permitted to have more than one PTR record for a given
4746 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
4747 all the names associated with an address, because they do in Solaris.
4748 However, it seems that they do not in Linux for data that comes from the
4749 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
4750 I found this out when I moved to a new Linux workstation and tried to run
4751 the Exim test suite.
4753 To get round this problem I have changed the code so that it now does its
4754 own call to the DNS to look up PTR records when searching for a host name.
4755 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
4756 addresses that are only in /etc/hosts are still found.
4758 This behaviour is, however, controlled by an option called host_lookup_
4759 order, which defaults to "bydns:byaddr". If people want to use the other
4760 order, or indeed, just use one or the other means of lookup, they can
4761 specify it in this variable.
4763 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
4764 some operating systems, this comes back from gethostbyaddr() as an empty
4765 string, and this is what Exim used to test for. However, it seems that in
4766 other systems, "." is yielded. Exim now tests for this case too.
4768 7. The values of check_spool_space and check_log_space are now held internally
4769 as a number of kilobytes instead of an absolute number of bytes. If a
4770 numbers is specified without 'K' or 'M', it is rounded up to the nearest
4771 kilobyte. This means that much larger values can be stored.
4773 8. Exim monitor: an attempt to get the action menu when not actually pointing
4774 at a message produces an empty menu entitled "No message selected". This
4775 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
4776 no entries in it ("Shell widget menu has zero width and/or height"). So I
4777 have added a single, blank menu entry in this case.
4779 9. Added ${quote_local_part.
4781 10. MIME decoding is now applied to the contents of Subject: header lines when
4784 11. Now that a reference to $sender_host_address automatically causes a reverse
4785 lookup to occur if necessary (4.13/18), there is no need to arrange for a
4786 host lookup before query-style lookups in lists that might use this
4787 variable. This has therefore been abolished, and the "net-" prefix is no
4788 longer necessary for query-style lookups.
4790 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
4791 have been a typo for LFLAGS, so it has been changed.
4793 13. The install script calls Exim with "-C /dev/null" in order to find the
4794 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
4795 to be output. Howeve, since Exim outputs its version number before the
4796 error, it didn't break the script. It just looked ugly. I fixed this by
4797 always allowing "-C /dev/null" if the caller is root.
4799 14. Ignore overlarge ACL variable number when reading spool file - insurance
4800 against a later release with more variables having written the file.
4802 15. The standard form for an IPv6 address literal was being rejected by EHLO.
4803 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
4804 this, as well as the form without the "IPv6" on the front.
4806 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
4807 OS/Makefile-Darwin file.
4809 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
4810 only to LDAP libraries that do not have LDAP_OPT_DEREF.
4812 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
4813 variable. However, some OS use ints for inodes. I've added cast to long int
4814 to get rid of the compiler warning.
4816 19. I had forgotten to lock out "/../" in configuration file names when
4817 ALT_CONFIG_PREFIX was set.
4819 20. Routers used for verification do not need to specify transports. However,
4820 if such a router generated a host list, and callout was configured, Exim
4821 crashed, because it could not find a port number from the (non-existent)
4822 transport. It now assumes port 25 in this circumstance.
4824 21. Added the -t option to exigrep.
4826 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
4827 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
4828 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
4829 them is set, LOOKUP_LSEARCH is forced.
4831 23. "exim -bV" now outputs a list of lookups that are included in the binary.
4833 24. Added sender and host information to the "rejected by local_scan()" log
4834 line; previously there was no indication of these.
4836 25. Added .include_if_exists.
4838 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
4839 Linux. It turns out that not all file systems support this. Apparently some
4840 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
4841 do it.) To cope with this, the error EINVAL, which means that sync-ing is
4842 not supported on the file descriptor, is now ignored when Exim is trying to
4843 sync a directory. This applies only to Linux.
4845 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
4847 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
4848 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
4851 29. Added support for maildirsize files from supplied patch (modified a bit).
4853 30. The use of :fail: followed by an empty string could lead Exim to respond to
4854 sender verification failures with (e.g.):
4856 550 Verification failed for <xxx>
4857 550 Sender verify failed
4859 where the first response line was missing the '-' that indicates it is not
4860 the final line of the response.
4862 31. The loop for finding the name of the user that called Exim had a hardwired
4863 limit of 10; it now uses the value of finduser_retries, which is used for
4864 all other user lookups.
4866 32. Added $received_count variable, available in data and not_smtp ACLs, and at
4869 33. Exim was neglecting to zero errno before one call of strtol() when
4870 expanding a string and expecting an integer value. On some systems this
4871 resulted in spurious "integer overflow" errors. Also, it was casting the
4872 result into an int without checking.
4874 34. Testing for a connection timeout using "timeout_connect" in the retry rules
4875 did not work. The code looks as if it has *never* worked, though it appears
4876 to have been documented since at least releast 1.62. I have made it work.
4878 35. The "timeout_DNS" error in retry rules, also documented since at least
4879 1.62, also never worked. As it isn't clear exactly what this means, and
4880 clearly it isn't a major issue, I have abolished the feature by treating it
4881 as "timeout", and writing a warning to the main and panic logs.
4883 36. The display of retry rules for -brt wasn't always showing the error code
4886 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
4887 timeout_connect_A, timeout_connect_MX.
4889 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
4890 to the empty sender.
4892 39. The daemon was not analysing the content of -oX till after it had closed
4893 stderr and disconnected from the controlling terminal. This meant that any
4894 syntax errors were only noted on the panic log, and the return code from
4895 the command was 0. By re-arranging the code a little, I've made the
4896 decoding happen first, so such errors now appear on stderr, and the return
4897 code is 1. However, the actual setting up of the sockets still happens in
4898 the disconnected process, so errors there are still only recorded on the
4901 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
4902 connections (as happens on some IP stacks) was logged at start up time as
4903 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
4904 it from "IPv6 and IPv4", which means that two separate sockets are being
4907 41. The debug output for gethostbyname2() or getipnodebyname() failures now
4908 says whether AF_INET or AF_INET6 was passed as an argument.
4910 42. Exiwhat output was messed up when time zones were included in log
4913 43. Exiwhat now gives more information about the daemon's listening ports,
4914 and whether -tls-on-connect was used.
4916 44. The "port" option of the smtp transport is now expanded.
4918 45. A "message" modifier in a "warn" statement in a non-message ACL was being
4919 silently ignored. Now an error message is written to the main and panic
4922 46. There's a new ACL modifier called "logwrite" which writes to a log file
4923 as soon as it is encountered.
4925 47. Added $local_user_uid and $local_user_gid at routing time.
4927 48. Exim crashed when trying to verify a sender address that was being
4930 49. Exim was recognizing only a space character after ".include". It now also
4931 recognizes a tab character.
4933 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
4934 extracting the relevant information from the specification. The man page no
4935 longer contains scrambled data for the -d option, and I've added a section
4936 at the front about calling Exim under different names.
4938 51. Added "extra_headers" argument to the "mail" command in filter files.
4940 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
4943 53. Installed eximstats 1.29.
4945 54. Added transport_filter_timeout as a generic transport option.
4947 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
4948 Cc: header lines. This was required by RFC 822, but it not required by RFC
4951 56. Exim used to add From:, Date:, and Message-Id: header lines to any
4952 incoming messages that did not have them. Now it does so only if the
4953 message originates locally, that is, if there is no associated remote host
4954 address. When Resent- header lines are present, this applies to the Resent-
4955 lines rather than the non-Resent- lines.
4957 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
4958 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
4960 58. Messages for configuration errors now include the name of the main
4961 configuration file - useful now that there may be more than one file in a
4962 list (.included file names were always shown).
4964 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
4965 for those rare installations that do not start the daemon as root or run it
4966 setuid root. I've cut out the call to initgroups() if the daemon is not
4969 60. The Exim user and group can now be bound into the binary as text strings
4970 that are looked up at the start of Exim's processing.
4972 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
4974 62. Added $mailstore_basename variable.
4976 63. Installed patch to sieve.c from Michael Haardt.
4978 64. When Exim failed to open the panic log after failing to open the main log,
4979 the original message it was trying to log was written to stderr and debug
4980 output, but if they were not available (the usual case in production), it
4981 was lost. Now it is written to syslog before the two lines that record the
4982 failures to open the logs.
4984 65. Users' Exim filters run in subprocesses under the user's uid. It is
4985 possible for a "deliver" command or an alias in a "personal" command to
4986 provoke an address rewrite. If logging of address rewriting is configured,
4987 this fails because the process is not running as root or exim. There may be
4988 a better way of dealing with this, but for the moment (because 4.30 needs
4989 to be released), I have disabled address rewrite logging when running a
4990 filter in a non-root, non-exim process.
4996 1. The buildconfig auxiliary program wasn't quoting the value set for
4997 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
4998 not defined. This bug was masked in 4.22 by the effect that was fixed in
5001 2. Some messages that were rejected after a message id was allocated were
5002 shown as "incomplete" by exigrep. It no longer does this for messages that
5003 are rejected by local_scan() or the DATA or non-SMTP ACLs.
5005 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
5006 have allow_domain_literals set, the ID did not get logged in the <= line.
5007 Domain literals are now always recognized in Message-ID: header lines.
5009 4. The first argument for a ${extract expansion item is the key name or field
5010 number. Leading and trailing spaces in this item were not being ignored,
5011 causing some misleading effects.
5013 5. When deliver_drop_privilege was set, single queue runner processes started
5014 manually (i.e. by the command "exim -q") or by the daemon (which uses the
5015 same command in the process it spins off) were not dropping privilege.
5017 6. When the daemon running as "exim" started a queue runner, it always
5018 re-executed Exim in the spun-off process. This is a waste of effort when
5019 deliver_drop_privilege is set. The new process now just calls the
5020 queue-runner function directly.
5026 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
5029 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
5030 ignored. Though the use of -oP was forcing the writing of a pid file, it
5031 was always written to the default place.
5033 3. If the message "no IP address found for host xxxx" is generated during
5034 incoming verification, it is now followed by identification of the incoming
5035 connection (so you can more easily find what provoked it).
5037 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
5039 5. Added some features to "harden" Exim a bit more against certain attacks:
5041 (a) There is now a build-time option called FIXED_NEVER_USERS that can
5042 be put in Local/Makefile. This is like the never_users runtime option,
5043 but it cannot be overridden. The default setting is "root".
5045 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
5046 prefix string with which any file named in a -C command line option
5049 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
5050 is retained for -C and -D only if the caller of Exim is root. Without
5051 it, the exim user may also use -C and -D and retain privilege.
5053 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
5054 command line option is disabled.
5056 6. Macro names set by the -D option must start with an upper case letter, just
5057 like macro names defined in the configuration file.
5059 7. Added "dereference=" facility to LDAP.
5061 8. Two instances of the typo "uknown" in the source files are fixed.
5063 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
5064 the Configure-Makefile script screwed up while processing it.
5066 10. Incorporated PCRE 4.4.
5068 11. The SMTP synchronization check was not operating right at the start of an
5069 SMTP session. For example, it could not catch a HELO sent before the client
5070 waited for the greeting. There is now a check for outstanding input at the
5071 point when the greeting is written. Because of the duplex, asynchronous
5072 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
5073 way, but not yet received, when the check is performed.
5075 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
5076 on TCP/IP sockets, because this apparently causes some broken clients to
5079 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
5080 unchanged) from the Cygwin maintainer.
5082 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
5083 was supported instead of testing for mbx. Effectively a typo.
5085 15. The spa authenticator server code was not checking that the input it
5086 received was valid base64.
5088 16. The debug output line for the "set" modifier in ACLs was not showing the
5089 name of the variable that was being set.
5091 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
5093 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
5094 lookup on its own. Something else was needed to trigger the lookup. For
5095 example, a match in host_lookup or the need for a host name in a host list.
5096 Now, if $sender_host_name is referenced and the host name has not yet been
5097 looked up, a lookup is performed. If the lookup fails, the variable remains
5098 empty, and $host_lookup_failed is set to "1".
5100 19. Added "eqi" as a case-independent comparison operator.
5102 20. The saslauthd authentication condition could segfault if neither service
5103 nor realm was specified.
5105 21. If an overflowing value such as "2048M" was set for message_size_limit, the
5106 error message that was logged was misleading, and incoming SMTP
5107 connections were dropped. The message is now more accurate, and temporary
5108 errors are given to SMTP connections.
5110 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
5111 (except RSET) with a 421 error, until QUIT is received. However, it was
5112 failing to send a response to QUIT.
5114 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
5115 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
5116 ACL is now run after the helo_try_verify_hosts code.
5118 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
5119 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
5120 case-independent, so other case variants are also recognized). Apparently
5121 some systems use these upper case variants.
5123 25. If more than two messages were waiting for the same host, and a transport
5124 filter was specified for the transport, Exim sent two messages over the
5125 same TCP/IP connection, and then failed with "socket operation on non-
5126 socket" when it tried to send the third.
5128 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
5130 27. The extern definition of crypt16() in expand.c was not being excluded when
5131 the OS had its own crypt16() function.
5133 28. Added bounce_return_body as a new option, and bounce_return_size_limit
5134 as a preferred synonym for return_size_limit, both as an option and as an
5137 29. Added LIBS=-liconv to OS/Makefile-OSF1.
5139 30. Changed the default configuration ACL to relax the local part checking rule
5140 for addresses that are not in any local domains. For these addresses,
5141 slashes and pipe symbols are allowed within local parts, but the sequence
5142 /../ is explicitly forbidden.
5144 31. SPA server authentication was not clearing the challenge buffer before
5147 32. log_message in a "warn" ACL statement was writing to the reject log as
5148 well as to the main log, which contradicts the documentation and doesn't
5149 seem right (because no rejection is happening). So I have stopped it.
5151 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
5152 However, I am unable to do any testing of this.
5154 34. Fixed an infelicity in the appendfile transport. When checking directories
5155 for a mailbox, to see if any needed to be created, it was accidentally
5156 using path names with one or more superfluous leading slashes; tracing
5157 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
5159 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
5160 contents are added to the log line that is written for every discarded
5161 recipient. (Previously a log_message setting was ignored.)
5163 36. The ${quote: operator now quotes the string if it is empty.
5165 37. The install script runs exim in order to find its version number. If for
5166 some reason other than non-existence or emptiness, which it checks, it
5167 could not run './exim', it was installing it with an empty version number,
5168 i.e. as "exim-". This error state is now caught, and the installation is
5171 38. An argument was missing from the function that creates an error message
5172 when Exim fails to connect to the socket for saslauthd authentication.
5173 This could cause Exim to crash, or give a corrupted message.
5175 39. Added isip, isip4, and isip6 to ${if conditions.
5177 40. The ACL variables $acl_xx are now saved with the message, and can be
5178 accessed later in routers, transports, and filters.
5180 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
5181 strings in the file are not string-expanded.
5183 42. If a MAIL command specified a SIZE value that was too large to fit into an
5184 int variable, the check against message_size_limit failed. Such values are
5185 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
5186 day this will have to be increased, but I don't think I want to be around
5187 when emails are that large.
5194 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
5195 iconv() is not standard in FreeBSD.
5197 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
5198 IPv6 enabled. The observed symptom was a segmentation fault on return from
5199 the function os_common_find_running_interfaces() in src/os.c.
5201 3. In the check_special_case() function in daemon.c I had used "errno" as an
5202 argument name, which causes warnings on some systems. This was basically a
5203 typo, since it was named "eno" in the comments!
5205 4. The code that waits for the clock to tick (at a resolution of some fraction
5206 of a second) so as to ensure message-id uniqueness was always waiting for
5207 at least one whole tick, when it could have waited for less. [This is
5208 almost certainly not relevant at current processor speeds, where it is
5209 unlikely to ever wait at all. But we try to future-proof.]
5211 5. The function that sleeps for a time interval that includes fractions of a
5212 second contained a race. It did not block SIGALRM between setting the
5213 timer, and suspending (a couple of lines later). If the interval was short
5214 and the sigsuspend() was delayed until after it had expired, the suspension
5215 never ended. On busy systems this could lead to processes getting stuck for
5218 6. Some uncommon configurations may cause a lookup to happen in a queue runner
5219 process, before it forks any delivery processes. The open lookup caching
5220 mechanism meant that the open file or database connection was passed into
5221 the delivery process. The problem was that delivery processes always tidy
5222 up cached lookup data. This could cause a problem for the next delivery
5223 process started by the queue runner, because the external queue runner
5224 process does not know about the closure. So the next delivery process
5225 still has data in the lookup cache. In the case of a file lookup, there was
5226 no problem because closing a file descriptor in a subprocess doesn't affect
5227 the parent. However, if the lookup was caching a connection to a database,
5228 the connection was closed, and the second delivery process was likely to
5229 see errors such as "PGSQL: query failed: server closed the connection
5230 unexpectedly". The problem has been fixed by closing all cached lookups
5231 in a queue runner before running a delivery process.
5233 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
5234 seem to have the "const" qualifier which it has on other OS. I've
5237 8. Change 4.21/2 was too strict. It is only if there are two authenticators
5238 *of the same type* (client or server) with the same public name that an
5239 error should be diagnosed.
5241 9. When Exim looked up a host name for an IP address, but failed to find the
5242 original IP address when looking up the host name (a safety check), it
5243 output the message "<ip address> does not match any IP for NULL", which was
5244 confusing, to say the least. The bug was that the host name should have
5245 appeared instead of "NULL".
5247 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
5248 user that is built into the binary, and the -C or -D options is used, root
5249 privilege is dropped before the configuration file is read. In addition,
5250 logging is switched to stderr instead of the normal log files. If the
5251 configuration then re-defines the Exim user, the unprivileged environment
5252 is probably not what is expected, so Exim logs a panic warning message (but
5255 However, if deliver_drop_privilege is set, the unprivileged state may well
5256 be exactly what is intended, so the warning has been cut out in that case,
5257 and Exim is allowed to try to write to its normal log files.
5263 1. smtp_return_error_details was not giving details for temporary sender
5264 or receiver verification errors.
5266 2. Diagnose a configuration error if two authenticators have the same public
5269 3. Exim used not to create the message log file for a message until the first
5270 delivery attempt. This could be confusing when incoming messages were held
5271 for policy or load reasons. The message log file is now created at the time
5272 the message is received, and an initial "Received" line is written to it.
5274 4. The automatically generated man page for command line options had a minor
5275 bug that caused no ill effects; however, a more serious problem was that
5276 the procedure for building the man page automatically didn't always
5277 operate. Consequently, release 4.20 contains an out-of-date version. This
5278 shouldn't happen again.
5280 5. When building Exim with embedded Perl support, the script that builds the
5281 Makefile was calling 'perl' to find its compile-time parameters, ignoring
5282 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
5284 6. The freeze_tell option was not being used for messages that were frozen on
5285 arrival, either by an ACL or by local_scan().
5287 7. Added the smtp_incomplete_transaction log selector.
5289 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
5290 was accepting AUTH without a new EHLO.
5292 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
5293 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
5296 10. Logging of TCP/IP connections (when configured) now happens in the main
5297 daemon process instead of the child process, so that the TCP/IP connection
5298 count is more accurate (but it can never be perfect).
5300 11. The use of "drop" in a nested ACL was not being handled correctly in the
5301 outer ACL. Now, if condition failure induced by the nested "drop" causes
5302 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
5303 or "require"), the connection is dropped.
5305 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
5306 that yield "discard" can now be used with an "accept" or a "discard" verb,
5307 but an error is generated for any others (because I can't see a useful way
5308 to define what should happen).
5310 13. When an ACL is read dynamically from a file (or anywhere else), the lines
5311 are now processed in the same way as lines in the Exim configuration file.
5312 In particular, continuation lines are supported.
5314 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
5316 15. Added -ti meaning -t -i.
5318 16. Check for letters, digits, hyphens, and dots in the names of dnslist
5319 domains, and warn by logging if others are found.
5321 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
5322 returned from GIFCONF when Exim is trying to find the list of interfaces on
5323 a host. The code in os.c has been modified to copy each ifreq to an aligned
5324 structure in all cases.
5326 Also, in some cases, the returned ifreq's were being copied to a 'struct
5327 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
5328 means the last couple of bytes of an IPv6 address could be chopped if the
5329 ifreq contained only a normal sockaddr (14 bytes storage).
5331 18. Named domain lists were not supported in the hosts_treat_as_local option.
5332 An entry such as +xxxx was not recognized, and was treated as a literal
5335 19. Ensure that header lines added by a DATA ACL are included in the reject log
5336 if the ACL subsequently rejects the message.
5338 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
5339 MD5 (which is deprecated).
5341 21. When testing a filter file using -bf, Exim was writing a message when it
5342 took the sender from a "From " line in the message, but it was not doing so
5343 when it took $return_path from a Return-Path: header line. It now does.
5345 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
5346 with a valid header line field name (a series of printing characters
5347 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
5349 23. Changed "disc" in the source to "disk" to conform to the documentation and
5350 the book and for uniformity.
5352 24. Ignore Sendmail's -Ooption=value command line item.
5354 25. When execve() failed while trying to run a command in a pipe transport,
5355 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
5356 could be confused with a return value of 69 from the command itself. This
5357 has been changed to 127, the value the shell returns if it is asked to run
5358 a non-existent command. The wording for the related log line suggests a
5359 non-existent command as the problem.
5361 26. If received_header_text expands to an empty string, do not add a Received:
5362 header line to the message. (Well, it adds a token one on the spool, but
5363 marks it "old" so that it doesn't get used or transmitted.)
5365 27. Installed eximstats 1.28 (addition of -nt option).
5367 28. There was no check for failure on the call to getsockname() in the daemon
5368 code. This can fail if there is a shortage of resources on the system, with
5369 ENOMEM, for example. A temporary error is now given on failure.
5371 29. Contrary to the C standard, it seems that in some environments, the
5372 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
5373 program. Exim now does this explicitly; it affects the formatting of
5374 timestamps using strftime().
5376 30. If exiqsumm was given junk data, it threw up some uninitialized variable
5377 complaints. I've now initialized all the variables, to avoid this.
5379 32. Header lines added by a system filter were not being "seen" during
5380 transport-time rewrites.
5382 33. The info_callback() function passed to OpenSSL is set up with type void
5383 (*)(SSL *, int, int), as described somewhere. However, when calling the
5384 function (actually a macro) that sets it up, the type void(*)() is
5385 expected. I've put in a cast to prevent warnings from picky compilers.
5387 34. If a DNS black list lookup found a CNAME record, but there were no A
5388 records associated with the domain it pointed at, Exim crashed.
5390 35. If a DNS black list lookup returned more than one A record, Exim ignored
5391 all but the first. It now scans all returned addresses if a particular IP
5392 value is being sought. In this situation, the contents of the
5393 $dnslist_value variable are a list of all the addresses, separated by a
5396 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
5397 to accept a host name and all its aliases if the forward lookup for any of
5398 them yielded the IP address of the incoming connection. Now it accepts only
5399 those names whose forward lookup yields the correct IP address. Any other
5400 names are discarded. This closes a loophole whereby a rogue DNS
5401 administrator could create reverse DNS records to break through a
5402 wildcarded host restriction in an ACL.
5404 37. If a user filter or a system filter that ran in a subprocess used any of
5405 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
5406 the wrong values were passed to the pipe command ($thisaddress had the
5407 value of $0, $0 had the value of $1, etc). This bug was introduced by
5408 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
5410 38. Improved the line breaking for long SMTP error messages from ACLs.
5411 Previously, if there was no break point between 40 and 75 characters, Exim
5412 left the rest of the message alone. Two changes have been made: (a) I've
5413 reduced the minimum length to 35 characters; (b) if it can't find a break
5414 point between 35 and 75 characters, it looks ahead and uses the first one
5415 that it finds. This may give the occasional overlong line, but at least the
5416 remaining text gets split now.
5418 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
5419 file descriptors might be low, and that setting 1000 would always raise it.
5420 It turns out that in some environments, the limit is already over 1000 and
5421 that lowering it causes trouble. So now Exim takes care not to decrease it.
5423 40. When delivering a message, the value of $return_path is set to $sender_
5424 address at the start of routing (routers may change the value). By an
5425 oversight, this default was not being set up when an address was tested by
5426 -bt or -bv, which affected the outcome if any router or filter referred to
5429 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
5430 log only when "message" or "log_message" are set. However, if one of the
5431 conditions was an address verification, or a call to a nested ACL, the
5432 messages generated by the underlying test were being passed through. This
5433 no longer happens. The underlying message is available in $acl_verify_
5434 message for both "message" and "log_message" expansions, so it can be
5435 passed through if needed.
5437 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
5438 new expansion $bh_ to give the encoded byte string without charset
5439 translation. Translation happens only if iconv() is available; HAVE_ICONV
5440 indicates this at build time. HEADERS_CHARSET gives the charset to
5441 translate to; headers_charset can change it in the configuration, and
5442 "headers charset" can change it in an individual filter file.
5444 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
5445 that creates RFC 2047 encoded "words" labels them as that charset instead
5446 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
5447 expansion operator; (ii) when Exim creates a From: line for a local
5448 message; (iii) when a header line is rewritten to include a "phrase" part.
5450 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
5451 buggy, causing it to skip the first lines of messages whose message ID
5452 ended in 'D'. This would not have bitten before Exim release 4.14, because
5453 message IDs were unlikely to end in 'D' before then. The effect was to have
5454 incorrect size information for certain domains.
5456 45. #include "config.h" was missing at the start of the crypt16.c module. This
5457 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
5460 46. If there was a timeout during a "random" callout check, Exim treated it as
5461 a failure of the random address, and carried on sending RSET and the real
5462 address. If the delay was just some slowness somewhere, the response to the
5463 original RCPT would be taken as a response to RSET and so on, causing
5464 mayhem of various kinds.
5466 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
5467 when I implemented it. It didn't allow for the fact that some option values
5468 may legitimatetly be negative (e.g. size_addition), and it didn't even do
5469 the right test for positive values.
5471 48. Domain names in DNS records are case-independent. Exim always looks them up
5472 in lower case. Some resolvers return domain names in exactly the case they
5473 appear in the zone file, that is, they may contain uppercase letters. Not
5474 all resolvers do this - some return always lower case. Exim was treating a
5475 change of case by a resolver as a change of domain, similar to a widening
5476 of a domain abbreviation. This triggered its re-routing code and so it was
5477 trying to route what was effectively the same domain again. This normally
5478 caused routing to fail (because the router wouldn't handle the domain
5479 twice). Now Exim checks for this case specially, and just changes the
5480 casing of the domain that it ultimately uses when it transmits the message
5483 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
5486 50. If a filter generated a file delivery with a non-absolute name (possible if
5487 no home directory exists for the router), the forbid_file option was not
5490 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
5491 the existing equality matching.
5493 52. Exim was using ints instead of ino_t variables in some places where it was
5494 dealing with inode numbers.
5496 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
5497 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
5498 called TMPDIR, and if it finds it is different, it changes its value.
5500 54. The smtp_printf() function is now made available to local_scan() so
5501 additional output lines can be written before returning. There is also an
5502 smtp_fflush() function to enable the detection of a dropped connection.
5503 The variables smtp_input and smtp_batched_input are exported to
5506 55. Changed the default runtime configuration: the message "Unknown user"
5507 has been removed from the ACL, and instead placed on the localuser router,
5508 using the cannot_route_message feature. This means that any verification
5509 failures that generate their own messages won't get overridden. Similarly,
5510 the "Unrouteable address" message that was in the ACL for unverifiable
5511 relay addresses has also been removed.
5513 56. Added hosts_avoid_esmtp to the smtp transport.
5515 57. The exicyclog script was not checking for the esoteric option
5516 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
5517 will work only if exicyclog is run under the appropriate euid.
5519 58. Following a discussion on the list, the rules by which Exim recognises line
5520 endings on incoming messages have been changed. The -dropcr and drop_cr
5521 options are now no-ops, retained only for backwards compatibility. The
5522 following line terminators are recognized: LF CRLF CR. However, special
5523 processing applies to CR:
5525 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
5526 nor a local message in the state where . is a terminator.
5528 (ii) If a bare CR is encountered in a header line, an extra space is added
5529 after the line terminator so as not to end the header. The reasoning
5530 behind this is that bare CRs in header lines are most likely either
5531 to be mistakes, or people trying to play silly games.
5533 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
5534 was being incorrectly given as 18 bytes larger than it should have been.
5535 This is a VOB (very old bug).
5537 60. This may never have affected anything current, but just in case it has:
5538 When the local host is found other than at the start of a list of hosts,
5539 the local host, those with the same MX, and any that follow, are discarded.
5540 When the list in question was part of a longer list of hosts, the following
5541 hosts (not currently being processed) were also being discarded. This no
5542 longer happens. I'm not sure if this situation could ever has previously
5545 61. Added the "/MX" feature to lists of hosts in the manualroute and query
5548 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
5549 header. This is something that is recommended in a new Internet Draft, and
5550 is something that is documented as being done by Sendmail. There are two
5551 possible values. For messages generated by the autoreply transport, Exim
5554 Auto-Submitted: auto-replied
5556 whereas for all other generated messages (e.g. bounces) it adds
5558 Auto-Submitted: auto-generated
5560 63. The "personal" condition in filters now includes a test for the
5561 Auto-Submitted: header. If it contains the string "auto-" the message it
5562 not considered personal.
5564 64. Added rcpt_include_affixes as a generic transport option.
5566 65. Added queue_only_override (default true).
5568 66. Added the syslog_duplication option.
5570 67. If what should have been the first header line of a message consisted of
5571 a space followed by a colon, Exim was mis-interpreting it as a header line.
5572 It isn't of course - it is syntactically invalid and should therefore be
5573 treated as the start of the message body. The misbehaviour could have
5574 caused a number of strange effects, including loss of data in subsequent
5575 header lines, and spool format errors.
5577 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
5578 client host had authenticated. This control can now be exercised by an ACL
5579 for more flexibility.
5581 69. By default, callouts do not happen when testing with -bh. There is now a
5582 variant, -bhc, which does actually run the callout code, including
5583 consulting and updating the callout cache.
5585 70. Added support for saslauthd authentication, courtesy of Alexander
5588 71. If statvfs() failed on the spool or log directories while checking their
5589 size for availability, Exim confusingly gave the error "space shortage".
5590 Furthermore, in debugging mode it crashed with a floating point exception.
5591 These checks are done if check_{spool,log}_{space,inodes} are set, and when
5592 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
5593 serious problem, Exim now writes to the main and panic logs when this
5594 happens, with details of the failure. It then refuses to accept the
5595 incoming message, giving the message "spool directory problem" or "log
5596 directory problem" with a 421 code for SMTP messages.
5598 72. When Exim is about to re-exec itself, it ensures that the file descriptors
5599 0, 1, and 2 exist, because some OS complain for execs without them (see
5600 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
5601 descriptors. However, the code omitted to check that the open succeeded,
5602 causing mysterious errors if for some reason the permissions on /dev/null
5603 got screwed. Now Exim writes a message to the main and panic logs, and
5604 bombs out if it can't open /dev/null.
5606 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
5607 interact so that it is all more flexible. It is supposed to remain
5608 backwards compatible. Also added extra_local_interfaces.
5610 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
5611 to bomb out with an assertion failure - to the client this appears as a
5612 connection drop. This problem occurs in the part of the code that was taken
5613 from the Samba project. Fortunately, the assertion is in a very simple
5614 function, so I have fixed this by reproducing the function inline in the
5615 one place where it is called, and arranging for authentication to fail
5616 instead of killing the process with assert().
5618 75. The SPA client code was not working when the server requested OEM rather
5619 than Unicode encoding.
5621 76. Added code to make require_files with a specific uid setting more usable in
5622 the case where statting the file as root fails - usually a non-root-mounted
5623 NFS file system. When this happens and the failure is EACCES, Exim now
5624 forks a subprocess and does the per-uid checking as the relevant uid.
5626 77. Added process_log_path.
5628 78. If log_file_path was not explicitly set, a setting of check_log_space or
5629 check_log_inodes was ignored.
5631 79. If a space check for the spool or log partitions fails, the incident is now
5632 logged. Of course, in the latter case the data may get lost...
5634 80. Added the %p formatting code to string_format() so that it can be used to
5635 print addresses in debug_print(). Adjusted all the address printing in the
5636 debugging in store.c to use %p rather than %d.
5638 81. There was a concern that a line of code in smtp_in.c could overflow a
5639 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
5640 initially expressed, the concern was not well-founded, because trailing
5641 spaces are removed early. However, if the trailing spaces were followed by
5642 a NULL, they did not get removed, so the overflow was possible. Two fixes
5645 (a) I re-wrote the offending code in a cleaner fashion.
5646 (b) If an incoming SMTP command contains a NULL character, it is rejected
5649 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
5650 runs initgroups(), so that if the Exim user is in any additional groups,
5651 they will be used during message reception.
5657 The change log for 4.20 and earlier releases has been archived.
git://git.exim.org / users / heiko / exim.git / blob