1 $Cambridge: exim/doc/doc-docbook/HowItWorks.txt,v 1.5 2006/07/31 13:19:36 ph10 Exp $
3 CREATING THE EXIM DOCUMENTATION
5 "You are lost in a maze of twisty little scripts."
8 This document describes how the various versions of the Exim documentation, in
9 different output formats, are created from DocBook XML, and also how the
10 DocBook XML is itself created.
13 BACKGROUND: THE OLD WAY
15 From the start of Exim, in 1995, the specification was written in a local text
16 formatting system known as SGCAL. This is capable of producing PostScript and
17 plain text output from the same source file. Later, when the "ps2pdf" command
18 became available with GhostScript, that was used to create a PDF version from
19 the PostScript. (A few earlier versions were created by a helpful user who had
20 bought the Adobe distiller software.)
22 A demand for a version in "info" format led me to write a Perl script that
23 converted the SGCAL input into a Texinfo file. Because of the somewhat
24 restrictive requirements of Texinfo, this script has always needed a lot of
25 maintenance, and was never totally satisfactory.
27 The HTML version of the documentation was originally produced from the Texinfo
28 version, but later I wrote another Perl script that produced it directly from
29 the SGCAL input, which made it possible to produce better HTML.
31 There were a small number of diagrams in the documentation. For the PostScript
32 and PDF versions, these were created using Aspic, a local text-driven drawing
33 program that interfaces directly to SGCAL. For the text and texinfo versions,
34 alternative ascii-art diagrams were used. For the HTML version, screen shots of
35 the PostScript output were turned into gifs.
38 A MORE STANDARD APPROACH
40 Although in principle SGCAL and Aspic could be generally released, they would
41 be unlikely to receive much (if any) maintenance, especially after I retire.
42 Furthermore, the old production method was only semi-automatic; I still did a
43 certain amount of hand tweaking of spec.txt, for example. As the maintenance of
44 Exim itself was being opened up to a larger group of people, it seemed sensible
45 to move to a more standard way of producing the documentation, preferable fully
46 automated. However, we wanted to use only non-commercial software to do this.
48 At the time I was thinking about converting (early 2005), the "obvious"
49 standard format in which to keep the documentation was DocBook XML. The use of
50 XML in general, in many different applications, was increasing rapidly, and it
51 seemed likely to remain a standard for some time to come. DocBook offered a
52 particular form of XML suited to documents that were effectively "books".
54 Maintaining an XML document by hand editing is a tedious, verbose, and
55 error-prone process. A number of specialized XML text editors were available,
56 but all the free ones were at a very primitive stage. I therefore decided to
57 keep the master source in AsciiDoc format, from which a secondary XML master
58 could be automatically generated.
60 The first "new" versions of the documents, for the 4.60 release, were generated
61 this way. However, there were a number of problems with using AsciiDoc for a
62 document as large and as complex as the Exim manual. As a result, I wrote a new
63 application called xfpt ("XML From Plain Text") which creates XML from a
64 relatively simple and consistent markup language. This application has been
65 released for general use, and the master sources for the Exim documentation are
68 All the output formats are generated from the XML file. If, in the future, a
69 better way of maintaining the XML source becomes available, this can be adopted
70 without changing any of the processing that produces the output documents.
71 Equally, if better ways of processing the XML become available, they can be
72 adopted without affecting the source maintenance.
74 A number of issues arose while setting this all up, which are best summed up by
75 the statement that a lot of the technology is (in 2006) still very immature. It
76 is probable that trying to do this conversion any earlier would not have been
77 anywhere near as successful. The main problems that still bother me are
78 described in the penultimate section of this document.
80 The following sections describe the processes by which the xfpt files are
81 transformed into the final output documents. In practice, the details are coded
82 into a Makefile that specifies the chain of commands for each output format.
87 Installing software to process XML puts lots and lots of stuff on your box. I
88 run Gentoo Linux, and a lot of things have been installed as dependencies that
89 I am not fully aware of. This is what I know about (version numbers are current
90 at the time of writing):
94 This converts the master source file into a DocBook XML file.
98 This is a shell script that drives various XML processors. It is used to
99 produce "formatted objects" for PostScript and PDF output, and to produce
100 HTML output. It uses xsltproc, libxml, libxslt, libexslt, and possibly other
101 things that I have not figured out, to apply the DocBook XSLT stylesheets.
107 These are all installed on my box; I do not know which of libxml or libxml2
108 the various scripts are actually using.
110 . xsl-stylesheets-1.68.1
112 These are the standard DocBook XSL stylesheets.
116 FOP is a processor for "formatted objects". It is written in Java. The fop
117 command is a shell script that drives it. It is used to generate PostScript
122 This is a text-oriented web brower. It is used to produce the Ascii form of
123 the Exim documentation (spec.txt) from a specially-created HTML format. It
124 seems to do a better job than lynx.
126 . docbook2texi (part of docbook2X 0.8.5)
128 This is a wrapper script for a two-stage conversion process from DocBook to a
129 Texinfo file. It uses db2x_xsltproc and db2x_texixml. Unfortunately, there
130 are two versions of this command; the old one is based on an earlier fork of
131 docbook2X and does not work.
133 . db2x_xsltproc and db2x_texixml (part of docbook2X 0.8.5)
135 More wrapping scripts (see previous item).
139 This is used to make a set of "info" files from a Texinfo file.
141 In addition, there are a number of locally written Perl scripts. These are
147 The makefile supports a number of targets of the form x.y, where x is one of
148 "filter", "spec", or "test", and y is one of "xml", "fo", "ps", "pdf", "html",
149 "txt", or "info". The intermediate targets "x.xml" and "x.fo" are provided for
150 testing purposes. The other five targets are production targets. For example:
154 This runs the necessary tools in order to create the file spec.pdf from the
155 original source spec.xfpt. A number of intermediate files are created during
156 this process, including the master DocBook source, called spec.xml. Of course,
157 the usual features of "make" ensure that if this already exists and is
158 up-to-date, it is not needlessly rebuilt.
160 The "test" series of targets were created so that small tests could easily be
161 run fairly quickly, because processing even the shortish XML document takes
162 a bit of time, and processing the main specification takes ages.
164 Another target is "exim.8". This runs a locally written Perl script called
165 x2man, which extracts the list of command line options from the spec.xml file,
166 and creates a man page. There are some XML comments in the spec.xml file to
167 enable the script to find the start and end of the options list.
169 There is also a "clean" target that deletes all the generated files.
172 CREATING DOCBOOK XML FROM XFPT INPUT
174 The small amount of local configuration for xfpt is included at the start of
175 the two .xfpt files; there are no separate local xfpt configuration files.
176 Running the xfpt command creates a .xml file from a .xfpt file. When this
177 succeeds, there is no output.
182 Processing a .xml file into the five different output formats is not entirely
183 straightforward. For a start, the same XML is not suitable for all the
184 different output styles. When the final output is in a text format (.txt,
185 .texinfo) for instance, all non-Ascii characters in the input must be converted
186 to Ascii transliterations because the current processing tools do not do this
187 correctly automatically.
189 In order to cope with these issues in a flexible way, a Perl script called
190 Pre-xml was written. This is used to preprocess the .xml files before they are
191 handed to the main processors. Adding one more tool onto the front of the
192 processing chain does at least seem to be in the spirit of XML processing.
194 The XML processors themselves make use of style files, which can be overridden
195 by local versions. There is one that applies to all styles, called MyStyle.xsl,
196 and others for the different output formats. I have included comments in these
197 style files to explain what changes I have made. Some of the changes are quite
203 The Pre-xml script copies a .xml file, making certain changes according to the
204 options it is given. The currently available options are as follows:
208 This option is used for Ascii output formats. It makes the following
209 character replacements:
211 ’ => ' apostrophe
212 © => (c) copyright
214 ‡ => ** double dagger
215 => a space hard space
218 The apostrophe is specified numerically because that is what xfpt generates
219 from an Ascii single quote character. Non-Ascii characters that are not in
220 this list should not be used without thinking about how they might be
221 converted for the Ascii formats.
223 In addition to the character replacements, this option causes quotes to be
224 put round <literal> text items, and <quote> and </quote> to be replaced by
225 Ascii quote marks. You would think the stylesheet would cope with the latter,
226 but it seems to generate non-Ascii characters that w3m then turns into
231 This option causes the <bookinfo> element to be removed from the XML. It is
232 used for the PostScript/PDF forms of the filter document, in order to avoid
233 the generation of a full title page.
237 Replace any occurrence of "fi" by the ligature fi except when it is
238 inside an XML element, or inside a <literal> part of the text.
240 The use of ligatures would be nice for the PostScript and PDF formats. Sadly,
241 it turns out that fop cannot at present handle the FB01 character correctly.
242 The only format that does so is the HTML format, but when I used this in the
243 test version, people complained that it made searching for words difficult.
244 So at the moment, this option is not used. :-(
248 Remove the XML to generate a Concept Index and an Options index. The source
249 document has two types of index entry, for a concept and an options index.
250 However, no index is required for the .txt and .texinfo outputs.
254 Remove the XML to generate a Concept and an Options Index, and add XML to
255 generate a single index. The only output processor that supports multiple
256 indexes is the processor that produces "formatted objects" for PostScript and
257 PDF output. The HTML processor ignores the XML settings for multiple indexes
258 and just makes one unified index. Specifying two indexes gets you two copies
259 of the same index, so this has to be changed.
263 Look for items of the form <option>...</option> and <varname>...</varname> in
264 ordinary paragraphs, and insert ​ after each underscore in the
265 enclosed text. The same is done for any word containing four or more upper
266 case letters (compile-time options in the Exim specification). The character
267 ​ is a zero-width space. This means that the line may be split after
268 one of these underscores, but no hyphen is inserted.
271 CREATING POSTSCRIPT AND PDF
273 These two output formats are created in three stages, with an additional fourth
274 stage for PDF. First, the XML is pre-processed by the Pre-xml script. For the
275 filter document, the <bookinfo> element is removed so that no title page is
276 generated. For the main specification, the only change is to insert line
277 breakpoints via -optbreak.
279 Second, the xmlto command is used to produce a "formatted objects" (.fo) file.
280 This process uses the following stylesheets:
282 (1) Either MyStyle-filter-fo.xsl or MyStyle-spec-fo.xsl
287 The last of these is not used for the filter document, which does not have a
288 title page. The first three stylesheets were created manually, either by typing
289 directly, or by coping from the standard style sheet and editing.
291 The final stylesheet has to be created from a template document, which is
292 called MyTitlepage.templates.xml. This was copied from the standard styles and
293 modified. The template is processed with xsltproc to produce the stylesheet.
294 All this apparatus is appallingly heavyweight. The processing is also very slow
295 in the case of the specification document. However, there should be no errors.
297 The reference book that saved my life while I was trying to get all this to
298 work is "DocBook XSL, The Complete Guide", third edition (2005), by Bob
299 Stayton, published by Sagehill Enterprises.
301 In the third part of the processing, the .fo file that is produced by the xmlto
302 command is processed by the fop command to generate either PostScript or PDF.
303 This is also very slow, and you get a whole slew of errors, of which these are
306 [ERROR] property - "background-position-horizontal" is not implemented yet.
308 [ERROR] property - "background-position-vertical" is not implemented yet.
310 [INFO] JAI support was not installed (read: not present at build time).
311 Trying to use Jimi instead
312 Error creating background image: Error creating FopImage object (Error
313 creating FopImage object
314 (http://docbook.sourceforge.net/release/images/draft.png) :
315 org.apache.fop.image.JimiImage
317 [WARNING] table-layout=auto is not supported, using fixed!
319 [ERROR] Unknown enumerated value for property 'span': inherit
321 [ERROR] Error in span property value 'inherit':
322 org.apache.fop.fo.expr.PropertyException: No conversion defined
324 [ERROR] Areas pending, text probably lost in lineinclude parts matched in the
325 response by response_pattern by means of numeric variables such as
327 The last one is particularly meaningless gobbledegook. Some of the errors and
328 warnings are repeated many times. Nevertheless, it does eventually produce
329 usable output, though I have a number of issues with it (see a later section of
330 this document). Maybe one day there will be a new release of fop that does
331 better (there are now signs - February 2006 - that this may be happening).
332 Maybe there will be some other means of producing PostScript and PDF from
333 DocBook XML. Maybe porcine aeronautics will really happen.
335 The PDF file that is produced by this process has one problem: the pages, as
336 shown by acroread in its thumbnail display, are numbered sequentially from one
337 to the end. Those numbers do not correspond with the page numbers of the body
338 of the document, which makes finding a page from the index awkward. There is a
339 facility in the PDF format to give pages appropriate "labels", but I cannot
340 find a way of persuading fop to generate these. Fortunately, it is possibly to
341 fix up the PDF to add page labels. I wrote a script called PageLabelPDF which
342 does this. They are shown correctly by acroread and xpdf, but not by
346 THE PAGELABELPDF SCRIPT
348 This script reads the standard input and writes the standard output. It
349 searches for the PDF object that sets data in its "Catalog", and adds
350 appropriate information about page labels. The number of front-matter pages
351 (those before chapter 1) is hard-wired into this script as 12 because I could
352 not find a way of determining it automatically. As the current table of
353 contents finishes near the top of the 11th page, there is plenty of room for
354 expansion, so it is unlikely to be a problem.
356 Having added data to the PDF file, the script then finds the xref table at the
357 end of the file, and adjusts its entries to allow for the added text. This
358 simple processing seems to be enough to generate a new, valid, PDF file.
363 Only two stages are needed to produce HTML, but the main specification is
364 subsequently postprocessed. The Pre-xml script is called with the -optbreak and
365 -oneindex options to preprocess the XML. Then the xmlto command creates the
366 HTML output directly. For the specification document, a directory of files is
367 created, whereas the filter document is output as a single HTML page. The
368 following stylesheets are used:
370 (1) Either MyStyle-chunk-html.xsl or MyStyle-nochunk-html.xsl
374 The first stylesheet references the chunking or non-chunking standard DocBook
375 stylesheet, as appropriate.
377 You may see a number of these errors when creating HTML: "Revisionflag on
378 unexpected element: literallayout (Assuming block)". They seem to be harmless;
379 the output appears to be what is intended.
381 The original HTML that I produced from the SGCAL input had hyperlinks back from
382 chapter and section titles to the table of contents. These links are not
383 generated by xmlto. One of the testers pointed out that the lack of these
384 links, or simple self-referencing links for titles, makes it harder to copy a
385 link name into, for example, a mailing list response.
387 I could not find where to fiddle with the stylesheets to make such a change, if
388 indeed the stylesheets are capable of it. Instead, I wrote a Perl script called
389 TidyHTML-spec to do the job for the specification document. It updates the
390 index.html file (which contains the the table of contents) setting up anchors,
391 and then updates all the chapter files to insert appropriate links.
393 The index.html file as built by xmlto contains the whole table of contents in a
394 single line, which makes is hard to debug by hand. Since I was postprocessing
395 it anyway, I arranged to insert newlines after every '>' character.
397 The TidyHTML-spec script also processes every HTML file, to tidy up some of the
398 untidy features therein. It turns <div class="literallayout"><p> into <div
399 class="literallayout"> and a matching </p></div> into </div> to get rid of
400 unwanted vertical white space in literallayout blocks. Before each occurrence
401 of </td> it inserts so that the table's cell is a little bit wider than
404 The TidyHTML-spec script also takes the opportunity to postprocess the
405 spec_html/ix01.html file, which contains the document index. Again, the index
406 is generated as one single line, so it splits it up. Then it creates a list of
407 letters at the top of the index and hyperlinks them both ways from the
408 different letter portions of the index.
410 People wanted similar postprocessing for the filter.html file, so that is now
411 done using a similar script called TidyHTML-filter. It was easier to use a
412 separate script because filter.html is a single file rather than a directory,
413 so the logic is somewhat different.
418 This happens in four stages. The Pre-xml script is called with the -ascii,
419 -optbreak, and -noindex options to convert the input to Ascii characters,
420 insert line break points, and disable the production of an index. Then the
421 xmlto command converts the XML to a single HTML document, using these
424 (1) MyStyle-txt-html.xsl
428 The MyStyle-txt-html.xsl stylesheet is the same as MyStyle-nochunk-html.xsl,
429 except that it contains an addition item to ensure that a generated "copyright"
430 symbol is output as "(c)" rather than the Unicode character. This is necessary
431 because the stylesheet itself generates a copyright symbol as part of the
432 document title; the character is not in the original input.
434 The w3m command is used with the -dump option to turn the HTML file into Ascii
435 text, but this contains multiple sequences of blank lines that make it look
436 awkward. Furthermore, chapter and section titles do not stand out very well. A
437 local Perl script called Tidytxt is used to post-process the output. First, it
438 converts sequences of blank lines into a single blank lines. Then it searches
439 for chapter and section headings. Each chapter heading is uppercased, and
440 preceded by an extra two blank lines and a line of equals characters. An extra
441 newline is inserted before each section heading, and they are underlined with
447 This process starts with the same Pre-xml call as for text files. Non-ascii
448 characters in the source are transliterated, and the <index> elements are
449 removed. The docbook2texi script is then called to convert the XML file into a
450 Texinfo file. However, this is not quite enough. The converted file ends up
451 with "conceptindex" and "optionindex" items, which are not recognized by the
452 makeinfo command. These have to be changed to "cindex" and "findex"
453 respectively in the final .texinfo file. Furthermore, the main menu lacks a
454 pointer to the index, and indeed the index node itself is missing. These
455 problems are fixed by running the file through a script called TidyInfo.
456 Finally, a call of makeinfo creates a set of .info files.
458 There is one apparently unconfigurable feature of docbook2texi: it does not
459 seem possible to give it a file name for its output. It chooses a name based on
460 the title of the document. Thus, the main specification ends up in a file
461 called the_exim_mta.texi and the filter document in exim_filtering.texi. These
462 files are removed after their contents have been copied and modified by the
463 TidyInfo script, which writes to a .texinfo file.
466 CREATING THE MAN PAGE
468 I wrote a Perl script called x2man to create the exim.8 man page from the
469 DocBook XML source. I deliberately did NOT start from the xfpt source,
470 because it is the DocBook source that is the "standard". This comment line in
471 the DocBook source marks the start of the command line options:
473 <!-- === Start of command line options === -->
475 A similar line marks the end. If at some time in the future another way other
476 than xfpt is used to maintain the DocBook source, it needs to be capable of
477 maintaining these comments.
482 There are a number of unresolved problems with producing the Exim documentation
483 in the manner described above. I will describe them here in the hope that in
484 future some way round them can be found.
486 (1) When a whole chain of tools is processing a file, an error somewhere
487 in the middle is often very hard to debug. For instance, an error in the
488 xfpt file might not show up until an XML processor throws a wobbly because
489 the generated XML is bad. You have to be able to read XML and figure out
490 what generated what. One of the reasons for creating the "test" series of
491 targets was to help in checking out these kinds of problem.
493 (2) There is a mechanism in XML for marking parts of the document as
494 "revised", and I have arranged for xfpt markup to use it. However, at the
495 moment, the only output format that pays attention to this is the HTML
496 output, which sets a green background. There are therefore no revision
497 marks (change bars) in the PostScript, PDF, or text output formats as
498 there used to be. (There never were for Texinfo.)
500 (3) The index entries in the HTML format take you to the top of the section
501 that is referenced, instead of to the point in the section where the index
504 (4) The HTML output supports only a single index, so the concept and options
505 index entries have to be merged.
507 (5) The index for the PostScript/PDF output does not merge identical page
508 numbers, which makes some entries look ugly.
510 (6) None of the indexes (PostScript/PDF and HTML) make use of textual
511 markup; the text is all roman, without any italic or boldface.
513 (7) I turned off hyphenation in the PostScript/PDF output, because it was
516 (a) It seems to force hyphenation if it is at all possible, without
517 regard to the "tightness" or "looseness" of the line. Decent
518 formatting software should attempt hyphenation only if the line is
519 over some "looseness" threshold; otherwise you get far too many
520 hyphenations, often for several lines in succession.
522 (b) It uses an algorithmic form of hyphenation that doesn't always produce
523 acceptable word breaks. (I prefer to use a hyphenation dictionary.)
525 (8) The PostScript/PDF output is badly paginated:
527 (a) There seems to be no attempt to avoid "widow" and "orphan" lines on
528 pages. A "widow" is the last line of a paragraph at the top of a page,
529 and an "orphan" is the first line of a paragraph at the bottom of a
532 (b) There seems to be no attempt to prevent section headings being placed
533 last on a page, with no following text on the page.
535 (9) The fop processor does not support "fi" ligatures, not even if you put the
536 appropriate Unicode character into the source by hand.
538 (10) There are no diagrams in the new documentation. This is something I hope
539 to work on. The previously used Aspic command for creating line art from a
540 textual description can output Encapsulated PostScript or Scalar Vector
541 Graphics, which are two standard diagram representations. Aspic could be
542 formally released and used to generate output that could be included in at
543 least some of the output formats.
545 (11) The use of a "zero-width space" works well as a way of specifying that
546 Exim option names can be split, without hyphens, over line breaks.
547 However, when an option is not split, if the line is very "loose", the
548 zero-width space is expanded, along with other spaces. This is a totally
549 crazy thing to, but unfortunately it is suggested by the Unicode
550 definition of the zero-width space, which says "its presence between two
551 characters does not prevent increased letter spacing in justification".
552 It seems that the implementors of fop have understood "letter spacing"
553 also to include "word spacing". Sigh.
555 The consequence of (7), (8), and (9) is that the PostScript/PDF output looks as
556 if it comes from some of the very early attempts at text formatting of around
557 20 years ago. We can only hope that 20 years' progress is not going to get
558 lost, and that things will improve in this area.
563 Markup.txt Describes the xfpt markup that is used
564 HowItWorks.txt This document
565 Makefile The makefile
566 MyStyle-chunk-html.xsl Stylesheet for chunked HTML output
567 MyStyle-filter-fo.xsl Stylesheet for filter fo output
568 MyStyle-fo.xsl Stylesheet for any fo output
569 MyStyle-html.xsl Stylesheet for any HTML output
570 MyStyle-nochunk-html.xsl Stylesheet for non-chunked HTML output
571 MyStyle-spec-fo.xsl Stylesheet for spec fo output
572 MyStyle-txt-html.xsl Stylesheet for HTML=>text output
573 MyStyle.xsl Stylesheet for all output
574 MyTitleStyle.xsl Stylesheet for spec title page
575 MyTitlepage.templates.xml Template for creating MyTitleStyle.xsl
576 Myhtml.css Experimental css stylesheet for HTML output
577 PageLabelPDF Script to postprocess PDF
578 Pre-xml Script to preprocess XML
579 TidyHTML-filter Script to tidy up the filter HTML output
580 TidyHTML-spec Script to tidy up the spec HTML output
581 TidyInfo Script to sort index problems in Texinfo output
582 Tidytxt Script to compact multiple blank lines
583 filter.xfpt xfpt source of the filter document
584 spec.xfpt xfpt source of the specification document
585 x2man Script to make the Exim man page from the XML
589 Last updated: 30 March 2006
git://git.exim.org / users / heiko / exim.git / blob