#!PERL_COMMAND -w
-# $Cambridge: exim/src/src/eximstats.src,v 1.6 2005/02/17 11:58:26 ph10 Exp $
+# $Cambridge: exim/src/src/eximstats.src,v 1.7 2005/06/03 14:28:50 steve Exp $
# Copyright (c) 2001 University of Cambridge.
# See the file NOTICE for conditions of use and distribution.
# Eximstats can now parse syslog lines as well as mainlog lines.
#
# 2004-12-20 V1.35 Wouter Verhelst
-# Pie charts by volume were actually generated by count. Fixed.
+# Pie charts by volume were actually generated by count. Fixed.
#
# 2005-02-07 V1.36 Gregor Herrmann / Steve Campbell
# Added average sizes to HTML Top tables.
-
+#
+# 2005-04-26 V1.37 Frank Heydlauf
+# Added -xls and the ability to specify output files.
+#
+# 2005-04-29 V1.38 Steve Campbell
+# Use FileHandles for outputing results.
+# Allow any combination of xls, txt, and html output.
+# Fixed display of large numbers with -nvr option
+# Fixed merging of reports with empty tables.
+#
+# 2005-05-27 V1.39 Steve Campbell
+# Added the -include_original_destination flag
+# Removed tabs and trailing whitespace.
+#
+#
+#
+# For documentation on the logfile format, see
+# http://www.exim.org/exim-html-4.50/doc/html/spec_48.html#IX2793
=head1 NAME
=head1 SYNOPSIS
- eximstats [Options] mainlog1 mainlog2 ... > report.txt
- eximstats -html [Options] mainlog1 mainlog2 ... > report.html
+ eximstats [Output] [Options] mainlog1 mainlog2 ...
eximstats -merge [Options] report.1.txt report.2.txt ... > weekly_report.txt
-Options:
+=head2 Output:
+
+=over 4
+
+=item B<-txt>
+
+Output the results in plain text to STDOUT.
+
+=item B<-txt>=I<filename>
+
+Output the results in plain text. Filename '-' for STDOUT is accepted.
+
+=item B<-html>
+
+Output the results in HTML to STDOUT.
+
+=item B<-html>=I<filename>
+
+Output the results in HTML. Filename '-' for STDOUT is accepted.
+
+=item B<-xls>
+
+Output the results in Excel compatible Format to STDOUT.
+Requires the Spreadsheet::WriteExcel CPAN module.
+
+=item B<-xls>=I<filename>
+
+Output the results in Excel compatible format. Filename '-' for STDOUT is accepted.
+
+
+=back
+
+=head2 Options:
=over 4
Include remote users in the top source/destination listings.
+=item B<-include_original_destination>
+
+Include the original destination email addresses rather than just
+using the final ones.
+Useful for finding out which of your mailing lists are receiving mail.
+
=item B<-byhost>
Show results by sending host. This may be combined with
=back
-=item B<-html>
-
-Output the results in HTML.
-
=item B<-charts>
Create graphical charts to be displayed in HTML output.
+Only valid in combination with I<-html>.
This requires the following modules which can be obtained
from http://www.cpan.org/modules/01modules.index.html
Eximstats parses exim mainlog and syslog files to output a statistical
analysis of the messages processed. By default, a text
-analysis is generated, but you can request an html analysis
-by using the B<-html> flag. See the help (B<-help>) to learn
+analysis is generated, but you can request other output formats
+using flags. See the help (B<-help>) to learn
about how to create charts from the tables.
=head1 AUTHOR
when you have multiple mail servers and a message cannot be
immeadiately delivered. Fixing this could be tricky...
+Merging of xls files is not (yet) possible. Be free to implement :)
+
=cut
use integer;
use strict;
+use IO::File;
# use Time::Local; # PH/FANF
use POSIX;
-use vars qw($HAVE_GD_Graph_pie $HAVE_GD_Graph_linespoints);
+use vars qw($HAVE_GD_Graph_pie $HAVE_GD_Graph_linespoints $HAVE_Spreadsheet_WriteExcel);
eval { require GD::Graph::pie; };
$HAVE_GD_Graph_pie = $@ ? 0 : 1;
eval { require GD::Graph::linespoints; };
$HAVE_GD_Graph_linespoints = $@ ? 0 : 1;
+eval { require Spreadsheet::WriteExcel; };
+$HAVE_Spreadsheet_WriteExcel = $@ ? 0 : 1;
##################################################
@days_per_month = (0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334);
$gig = 1024 * 1024 * 1024;
-$VERSION = '1.36';
+$VERSION = '1.39';
# How much space do we allow for the Hosts/Domains/Emails/Edomains column headers?
$COLUMN_WIDTHS = 8;
use vars qw($total_received_data $total_received_data_gigs $total_received_count);
use vars qw($total_delivered_data $total_delivered_data_gigs $total_delivered_count);
use vars qw(%arrival_time %size %from_host %from_address);
-use vars qw(%timestamp2time); #Hash of timestamp => time.
-use vars qw($last_timestamp $last_time); #The last time convertion done.
-use vars qw($last_date $date_seconds); #The last date convertion done.
-use vars qw($last_offset $offset_seconds); #The last time offset convertion done.
+use vars qw(%timestamp2time); #Hash of timestamp => time.
+use vars qw($last_timestamp $last_time); #The last time convertion done.
+use vars qw($last_date $date_seconds); #The last date convertion done.
+use vars qw($last_offset $offset_seconds); #The last time offset convertion done.
use vars qw($localtime_offset);
-use vars qw($i); #General loop counter.
-use vars qw($debug); #Debug mode?
-use vars qw($ntopchart); #How many entries should make it into the chart?
-use vars qw($gddirectory); #Where to put files from GD::Graph
+use vars qw($i); #General loop counter.
+use vars qw($debug); #Debug mode?
+use vars qw($ntopchart); #How many entries should make it into the chart?
+use vars qw($gddirectory); #Where to put files from GD::Graph
+use vars qw($workbook $ws_global $ws_relayed $ws_top50 $ws_errors ); #For use in Speadsheed::WriteExcel
+use vars qw($row $col $row_hist $col_hist $row_league_table);
+use vars qw($run_hist);
+use vars qw($f_default $f_header1 $f_header2 $f_headertab $f_percent); #Format Header
+
+# Output FileHandles
+use vars qw($txt_fh $htm_fh $xls_fh);
$ntopchart = 5;
use vars qw($show_errors $show_relay $show_transport $transport_pattern);
use vars qw($topcount $local_league_table $include_remote_users);
use vars qw($hist_opt $hist_interval $hist_number $volume_rounding);
-use vars qw($relay_pattern @queue_times $html @user_patterns @user_descriptions);
+use vars qw($relay_pattern @queue_times @user_patterns @user_descriptions);
+use vars qw($include_original_destination);
+use vars qw($txt_fh $htm_fh $xls_fh);
use vars qw(%do_sender); #Do sender by Host, Domain, Email, and/or Edomain tables.
use vars qw($charts $chartrel $chartdir $charts_option_specified);
-use vars qw($merge_reports); #Merge old reports ?
+use vars qw($merge_reports); #Merge old reports ?
# The following are modified in the parse() routine, and
# referred to in the print_*() routines.
# Subroutines #
##################################################
+#######################################################################
+# get_filehandle($file,\%output_files);
+# Return a filehandle writing to $file.
+#
+# If %output_files is defined, check that $output_files{$file}
+# doesn't exist and die if it does, or set it if it doesn't.
+#######################################################################
+sub get_filehandle {
+ my($file,$output_files_href) = @_;
+
+ $file = '-' if ($file eq '');
+
+ if (defined $output_files_href) {
+ die "You can only output to '$file' once! Use -h for help.\n" if exists $output_files_href->{$file};
+ $output_files_href->{$file} = 1;
+ }
+
+ if ($file eq '-') {
+ return \*STDOUT;
+ }
+
+ if (-e $file) {
+ unlink $file or die "Failed to rm $file: $!";
+ }
+
+ my $fh = new IO::File $file, O_WRONLY|O_CREAT|O_EXCL;
+ die "new IO::File $file failed: $!" unless (defined $fh);
+ return $fh;
+}
+
#######################################################################
# volume_rounded();
}
else {
# We don't want any rounding to be done.
- $rounded = sprintf("%4d", ($g * $gig) + $x);
+ # and we don't need broken formated output which on one hand avoids numbers from
+ # being interpreted as string by Spreadsheed Calculators, on the other hand
+ # breaks if more than 4 digits! -> flexible length instead of fixed length
+ # Format the return value at the output routine! -fh
+ #$rounded = sprintf("%d", ($g * $gig) + $x);
+ no integer;
+ $rounded = sprintf("%.0f", ($g * $gig) + $x);
}
return $rounded;
$$bytes_sref += ($1 % (1024 * 1024) * 1024);
}
elsif ($rounded =~ /(\d+)/) {
- $$gigabytes_sref += $1 / $gig;
+ # We need to turn off integer in case we are merging an -nvr report.
+ no integer;
+ $$gigabytes_sref += int($1 / $gig);
$$bytes_sref += $1 % $gig;
}
my $temp = "Time spent on the queue: $string";
-my($format);
-if ($html) {
- print "<hr><a name=\"$string time\"></a><h2>$temp</h2>\n";
- print "<table border=0 width=\"100%\">\n";
- print "<tr><td>\n";
- print "<table border=1>\n";
- print "<tr><th>Time</th><th>Messages</th><th>Percentage</th><th>Cumulative Percentage</th>\n";
- $format = "<tr><td align=\"right\">%s %s</td><td align=\"right\">%d</td><td align=\"right\">%5.1f%%</td><td align=\"right\">%5.1f%%</td>\n";
+
+my $txt_format = "%5s %4s %6d %5.1f%% %5.1f%%\n";
+my $htm_format = "<tr><td align=\"right\">%s %s</td><td align=\"right\">%d</td><td align=\"right\">%5.1f%%</td><td align=\"right\">%5.1f%%</td>\n";
+
+# write header
+printf $txt_fh ("%s\n%s\n\n", $temp, "-" x length($temp)) if $txt_fh;
+if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"$string time\"></a><h2>$temp</h2>\n";
+ print $htm_fh "<table border=0 width=\"100%\">\n";
+ print $htm_fh "<tr><td>\n";
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th>Time</th><th>Messages</th><th>Percentage</th><th>Cumulative Percentage</th>\n";
}
-else
+if ($xls_fh)
{
- printf("%s\n%s\n\n", $temp, "-" x length($temp));
- $format = "%5s %4s %6d %5.1f%% %5.1f%%\n";
+
+ $ws_global->write($row++, $col, "Time spent on the queue: ".$string, $f_header2);
+ my @content=("Time", "Messages", "Percentage", "Cumulative Percentage");
+ &set_worksheet_line($ws_global, $row++, 1, \@content, $f_headertab);
}
+
for ($i = 0; $i <= $#queue_times; $i++) {
if ($$array[$i] > 0)
{
my $percent = ($$array[$i] * 100)/$queue_total;
$cumulative_percent += $percent;
- printf($format,
- $printed_one? " " : "Under",
- format_time($queue_times[$i]),
- $$array[$i], $percent, $cumulative_percent);
- if (!defined($queue_times[$i])) {
- print "Not defined";
+
+ my @content=($printed_one? " " : "Under",
+ format_time($queue_times[$i]),
+ $$array[$i], $percent, $cumulative_percent);
+
+ if ($htm_fh) {
+ printf $htm_fh ($htm_format, @content);
+ if (!defined($queue_times[$i])) {
+ print $htm_fh "Not defined";
+ }
+ }
+ if ($txt_fh) {
+ printf $txt_fh ($txt_format, @content);
+ if (!defined($queue_times[$i])) {
+ print $txt_fh "Not defined";
+ }
+ }
+ if ($xls_fh)
+ {
+ no integer;
+ &set_worksheet_line($ws_global, $row, 0, [@content[0,1,2]], $f_default);
+ &set_worksheet_line($ws_global, $row++, 3, [$content[3]/100,$content[4]/100], $f_percent);
+
+ if (!defined($queue_times[$i])) {
+ $col=0;
+ $ws_global->write($row++, $col, "Not defined" );
+ }
}
+
push(@chartdatanames,
($printed_one? "" : "Under") . format_time($queue_times[$i]));
push(@chartdatavals, $$array[$i]);
if ($queue_more_than > 0) {
my $percent = ($queue_more_than * 100)/$queue_total;
$cumulative_percent += $percent;
- printf($format,
- "Over ",
- format_time($queue_times[$#queue_times]),
- $queue_more_than, $percent, $cumulative_percent);
+
+ my @content = ("Over ", format_time($queue_times[$#queue_times]),
+ $queue_more_than, $percent, $cumulative_percent);
+
+ printf $txt_fh ($txt_format, @content) if $txt_fh;
+ printf $htm_fh ($htm_format, @content) if $htm_fh;
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_global, $row, 0, [@content[0,1,2]], $f_default);
+ &set_worksheet_line($ws_global, $row++, 3, [$content[3]/100,$content[4]/100], $f_percent);
+ }
+
}
+
push(@chartdatanames, "Over " . format_time($queue_times[$#queue_times]));
push(@chartdatavals, $queue_more_than);
#printf("Unknown %6d\n", $queue_unknown) if $queue_unknown > 0;
-if ($html) {
- print "</table>\n";
- print "</td><td>\n";
+if ($htm_fh) {
+ print $htm_fh "</table>\n";
+ print $htm_fh "</td><td>\n";
if ($HAVE_GD_Graph_pie && $charts) {
my @data = (
);
my $gd = $graph->plot(\@data) or warn($graph->error);
if ($gd) {
- open(IMG, ">$chartdir/$pngname") or die $!;
+ open(IMG, ">$chartdir/$pngname") or die "Could not write $chartdir/$pngname: $!\n";
binmode IMG;
print IMG $gd->png;
close IMG;
- print "<img src=\"$chartrel/$pngname\">";
+ print
$htm_fh "<img src=\"$chartrel/$pngname\">";
}
}
- print "</td></tr></table>\n";
+ print $htm_fh "</td></tr></table>\n";
+}
+
+if ($xls_fh)
+{
+ $row++;
}
-print "\n";
+print $txt_fh "\n" if $txt_fh;
+print $htm_fh "\n" if $htm_fh;
+
}
my(@chartdatanames);
my(@chartdatavals);
my($maxd) = 0;
+
+if (!$run_hist) # save first row of print_histogram for xls output
+{
+ $row_hist = $row;
+}
+else
+{
+ $row = $row_hist;
+}
+
for ($i = 0; $i < $hist_number; $i++)
{ $maxd = $interval_count[$i] if $interval_count[$i] > $maxd; }
my($type);
if ($text eq "Deliveries")
- {
+{
$type = ($scale == 1)? "delivery" : "deliveries";
- }
+}
else
- {
+{
$type = ($scale == 1)? "message" : "messages";
- }
+}
+
+# make and output title
+my $title = sprintf("$text per %s",
+ ($hist_interval == 60)? "hour" :
+ ($hist_interval == 1)? "minute" : "$hist_interval minutes");
-my($title) = sprintf("$text per %s (each dot is $scale $type)",
- ($hist_interval == 60)? "hour" :
- ($hist_interval == 1)? "minute" : "$hist_interval minutes");
+my $txt_htm_title = $title . " (each dot is $scale $type)";
-if ($html) {
- print "<hr><a name=\"$text\"></a><h2>$title</h2>\n";
- print "<table border=0 width=\"100%\">\n";
- print "<tr><td><pre>\n";
+printf $txt_fh ("%s\n%s\n\n", $txt_htm_title, "-" x length($txt_htm_title)) if $txt_fh;
+
+if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"$text\"></a><h2>$txt_htm_title</h2>\n";
+ print $htm_fh "<table border=0 width=\"100%\">\n";
+ print $htm_fh "<tr><td><pre>\n";
}
-else {
- printf("%s\n%s\n\n", $title, "-" x length($title));
+
+if ($xls_fh)
+{
+ $title =~ s/Messages/Msg/ ;
+ $ws_global->write($row++, $col_hist+1, $title, $f_headertab);
}
+
my $hour = 0;
my $minutes = 0;
for ($i = 0; $i < $hist_number; $i++)
- {
+{
my $c = $interval_count[$i];
# If the interval is an hour (the maximum) print the starting and
my $temp;
if ($hist_opt == 1)
- {
+ {
$temp = sprintf("%02d-%02d", $hour, $hour + 1);
- print $temp;
+
+ print $txt_fh $temp if $txt_fh;
+ print $htm_fh $temp if $htm_fh;
+
+ if ($xls_fh)
+ {
+ if ($run_hist==0) # only on first run
+ {
+ &set_worksheet_line($ws_global, $row, 0, [$temp], $f_default);
+ }
+ }
+
push(@chartdatanames, $temp);
$hour++;
- }
+ }
else
- {
+ {
if ($minutes == 0)
{ $temp = sprintf("%02d:%02d", $hour, $minutes) }
else
{ $temp = sprintf(" :%02d", $minutes) }
- print $temp;
+
+ print $txt_fh $temp if $txt_fh;
+ print $htm_fh $temp if $htm_fh;
+ if (($xls_fh) and ($run_hist==0)) # only on first run
+ {
+ $temp = sprintf("%02d:%02d", $hour, $minutes);
+ &set_worksheet_line($ws_global, $row, 0, [$temp], $f_default);
+ }
+
push(@chartdatanames, $temp);
$minutes += $hist_interval;
if ($minutes >= 60)
$minutes = 0;
$hour++;
}
- }
- push(@chartdatavals, $c);
- printf(" %6d %s\n", $c, "." x ($c/$scale));
}
-print "\n";
-if ($html)
+ push(@chartdatavals, $c);
+
+ printf $txt_fh (" %6d %s\n", $c, "." x ($c/$scale)) if $txt_fh;
+ printf $htm_fh (" %6d %s\n", $c, "." x ($c/$scale)) if $htm_fh;
+ if ($xls_fh)
{
- print "</pre>\n";
- print "</td><td>\n";
+ &set_worksheet_line($ws_global, $row++, $col_hist+1, [$c], $f_default);
+ }
+
+} #end for
+
+printf $txt_fh "\n" if $txt_fh;
+printf $htm_fh "\n" if $htm_fh;
+
+if ($htm_fh)
+{
+ print $htm_fh "</pre>\n";
+ print $htm_fh "</td><td>\n";
if ($HAVE_GD_Graph_linespoints && $charts) {
# calculate the graph
my @data = (
if ($text =~ /Messages/) { $pngname = "histogram_mes.png"; }
my $gd = $graph->plot(\@data) or warn($graph->error);
if ($gd) {
- open(IMG, ">$chartdir/$pngname") or die $!;
+ open(IMG, ">$chartdir/$pngname") or die "Could not write $chartdir/$pngname: $!\n";
binmode IMG;
print IMG $gd->png;
close IMG;
- print "<img src=\"$chartrel/$pngname\">";
+ print
$htm_fh "<img src=\"$chartrel/$pngname\">";
}
}
- print "</td></tr></table>\n";
+ print $htm_fh "</td></tr></table>\n";
}
+
+$col_hist++; # where to continue next times
+
+$row+=2; # leave some space after history block
+$run_hist=1; # we have done this once or more
}
my(@chartdatavals) = ();
my $chartotherval = 0;
-my($format);
-if ($html) {
- print "<hr><a name=\"$text count\"></a><h2>$temp</h2>\n";
- print "<table border=0 width=\"100%\">\n";
- print "<tr><td>\n";
- print "<table border=1>\n";
- print "<tr><th>Messages</th><th>Bytes</th><th>Average</th><th>\u$text</th>\n";
+my $htm_format;
+my $txt_format = "%7d %10s %s\n";
+
+# write header
+printf $txt_fh ("%s\n%s\n\n", $temp, "-" x length($temp)) if $txt_fh;
+if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"$text count\"></a><h2>$temp</h2>\n";
+ print $htm_fh "<table border=0 width=\"100%\">\n";
+ print $htm_fh "<tr><td>\n";
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th>Messages</th><th>Bytes</th><th>Average</th><th>\u$text</th>\n";
# Align non-local addresses to the right (so all the .com's line up).
# Local addresses are aligned on the left as they are userids.
my $align = ($text !~ /local/i) ? 'right' : 'left';
- $format = "<tr><td align=\"right\">%d</td><td align=\"right\">%s</td><td align=\"right\">%s</td><td align=\"$align\" nowrap>%s</td>\n";
+ $htm_format = "<tr><td align=\"right\">%d</td><td align=\"right\">%s</td><td align=\"right\">%s</td><td align=\"$align\" nowrap>%s</td>\n";
}
-else {
- printf("%s\n%s\n\n", $temp, "-" x length($temp));
- $format = "%7d %10s %s\n";
+if ($xls_fh)
+{
+ $ws_top50->write($row_league_table++, 0, $temp, $f_header2);
+ &set_worksheet_line($ws_top50, $row_league_table++, 0, ["Messages", "Bytes", "Average", $text], $f_headertab );
}
+
+# write content
my($key,$htmlkey,$rounded_volume,$rounded_average,$count,$data,$gigs);
foreach $key (top_n_sort($topcount,$m_count,$m_data_gigs,$m_data)) {
- if ($html) {
+
+ # When displaying the average figures, we calculate the average of
+ # the rounded data, as the user would calculate it. This reduces
+ # the accuracy slightly, but we have to do it this way otherwise
+ # when using -merge to convert results from text to HTML and
+ # vice-versa discrepencies would occur.
+ $rounded_volume = volume_rounded($$m_data{$key},$$m_data_gigs{$key});
+ $data = $gigs = 0;
+ un_round($rounded_volume,\$data,\$gigs);
+ $count = $$m_count{$key};
+ $rounded_average = volume_rounded($data/$count,$gigs/$count);
+ my @content=( $count, $rounded_volume, $rounded_average);
+
+ # write content
+ # any reason not to include rounded_average in txt-output? -fh
+ printf $txt_fh ($txt_format, $count, $rounded_volume, $key) if $txt_fh;
+
+ if ($htm_fh) {
$htmlkey = $key;
$htmlkey =~ s/>/\>\;/g;
$htmlkey =~ s/</\<\;/g;
-
- # When displaying the average figures, we calculate the average of
- # the rounded data, as the user would calculate it. This reduces
- # the accuracy slightly, but we have to do it this way otherwise
- # when using -merge to convert results from text to HTML and
- # vice-versa discrepencies would occur.
- $rounded_volume = volume_rounded($$m_data{$key},$$m_data_gigs{$key});
- $data = $gigs = 0;
- un_round($rounded_volume,\$data,\$gigs);
- $count = $$m_count{$key};
- $rounded_average = volume_rounded($data/$count,$gigs/$count);
- printf($format, $count, $rounded_volume, $rounded_average, $htmlkey);
+ printf $htm_fh ($htm_format, @content, $htmlkey);
}
- else {
- printf($format, $$m_count{$key}, volume_rounded($$m_data{$key},$$m_data_gigs{$key}), $key);
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_top50, $row_league_table++, 0, [@content, $key], $f_default);
}
+
if (scalar @chartdatanames < $ntopchart)
- {
+ {
push(@chartdatanames, $key);
push(@chartdatavals, $$m_count{$key});
- }
+ }
else
- {
+ {
$chartotherval += $$m_count{$key};
- }
}
+}
+
push(@chartdatanames, "Other");
push(@chartdatavals, $chartotherval);
-if ($html)
- {
- print "</table>\n";
- print "</td><td>\n";
+print $txt_fh "\n" if $txt_fh;
+if ($htm_fh)
+{
+ print $htm_fh "</table>\n";
+ print $htm_fh "</td><td>\n";
if ($HAVE_GD_Graph_pie && $charts)
{
# calculate the graph
if ($gd) {
my $temp = $text;
$temp =~ s/ /_/g;
- open(IMG, ">$chartdir/${temp}_count.png") or die $!;
+ open(IMG, ">$chartdir/${temp}_count.png") or die "Could not write $chartdir/${temp}_count.png: $!\n";
binmode IMG;
print IMG $gd->png;
close IMG;
- print "<img src=\"$chartrel/${temp}_count.png\">";
+ print
$htm_fh "<img src=\"$chartrel/${temp}_count.png\">";
}
}
- print "</td><td>\n";
- print "</td></tr></table>\n";
+ print $htm_fh "</td><td>\n";
+ print $htm_fh "</td></tr></table>\n\n";
+}
+if ($xls_fh)
+{
+ $row_league_table++;
}
-print "\n";
+
+
+# write header
$temp = "Top $name by volume";
-if ($html) {
- print "<hr><a name=\"$text volume\"></a><h2>$temp</h2>\n";
- print "<table border=0 width=\"100%\">\n";
- print "<tr><td>\n";
- print "<table border=1>\n";
- print "<tr><th>Messages</th><th>Bytes</th><th>Average</th><th>\u$text</th>\n";
+
+printf $txt_fh ("%s\n%s\n\n", $temp, "-" x length($temp)) if $txt_fh;
+if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"$text volume\"></a><h2>$temp</h2>\n";
+ print $htm_fh "<table border=0 width=\"100%\">\n";
+ print $htm_fh "<tr><td>\n";
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th>Messages</th><th>Bytes</th><th>Average</th><th>\u$text</th>\n";
}
-else {
- printf("%s\n%s\n\n", $temp, "-" x length($temp));
+if ($xls_fh)
+{
+ $ws_top50->write($row_league_table++, 0, $temp, $f_header2);
+ &set_worksheet_line($ws_top50, $row_league_table++, 0, ["Messages", "Bytes", "Average", $text], $f_headertab);
}
@chartdatanames = ();
if ($$m_data_gigs{$key}) {
$use_gig = 1;
}
- if ($html) {
+
+ $rounded_volume = volume_rounded($$m_data{$key},$$m_data_gigs{$key});
+ $data = $gigs = 0;
+ un_round($rounded_volume,\$data,\$gigs);
+ $count = $$m_count{$key};
+ $rounded_average = volume_rounded($data/$count,$gigs/$count);
+ my @content=($count, $rounded_volume, $rounded_average );
+
+ # write content
+ # any reasons for not including rounded_average in the txt-version?? -fh
+ printf $txt_fh ($txt_format, $count, $rounded_volume, $key) if $txt_fh;
+ if ($htm_fh) {
$htmlkey = $key;
$htmlkey =~ s/>/\>\;/g;
$htmlkey =~ s/</\<\;/g;
-
- $rounded_volume = volume_rounded($$m_data{$key},$$m_data_gigs{$key});
- $data = $gigs = 0;
- un_round($rounded_volume,\$data,\$gigs);
- $count = $$m_count{$key};
- $rounded_average = volume_rounded($data/$count,$gigs/$count);
- printf($format, $count, $rounded_volume, $rounded_average, $htmlkey);
+ printf $htm_fh ($htm_format, @content, $htmlkey);
}
- else {
- printf($format, $$m_count{$key}, volume_rounded($$m_data{$key},$$m_data_gigs{$key}), $key);
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_top50, $row_league_table++, 0, [@content, $key], $f_default);
}
+
if (scalar @chartdatanames < $ntopchart) {
if ($use_gig) {
if ($$m_data_gigs{$key}) {
- push(@chartdatanames, $key);
- push(@chartdatavals, $$m_data_gigs{$key});
+ push(@chartdatanames, $key);
+ push(@chartdatavals, $$m_data_gigs{$key});
}
}
else {
push(@chartdatanames, "Other");
push(@chartdatavals, $chartotherval);
-if ($html) {
- print "</table>\n";
- print "</td><td>\n";
+print $txt_fh "\n" if $txt_fh;
+if ($htm_fh) {
+ print $htm_fh "</table>\n";
+ print $htm_fh "</td><td>\n";
if ($HAVE_GD_Graph_pie && $charts) {
# calculate the graph
my @data = (
);
my $gd = $graph->plot(\@data) or warn($graph->error);
if ($gd) {
- my $temp = $text;
+ $temp = $text;
$temp =~ s/ /_/g;
- open(IMG, ">$chartdir/${temp}_volume.png") or die $!;
+ open(IMG, ">$chartdir/${temp}_volume.png") or die "Could not write $chartdir/${temp}_volume.png: $!\n";
binmode IMG;
print IMG $gd->png;
close IMG;
- print "<img src=\"$chartrel/${temp}_volume.png\">";
+ print
$htm_fh "<img src=\"$chartrel/${temp}_volume.png\">";
}
}
- print "</td><td>\n";
- print "</td></tr></table>\n";
+ print $htm_fh "</td><td>\n";
+ print $htm_fh "</td></tr></table>\n\n";
}
-
-print "\n";
+if ($xls_fh)
+{
+ ++$row_league_table;
}
+}
#######################################################################
# top_n_sort();
# Check to see that the new value is bigger than the lowest of the
# top n keys that we're keeping.
$comparison = $value1 <=> $minimum_value1 ||
- $href2->{$key} <=> $minimum_value2 ||
- $href3->{$key} <=> $minimum_value3 ||
- $top_n_key cmp $key;
+ $href2->{$key} <=> $minimum_value2 ||
+ $href3->{$key} <=> $minimum_value3 ||
+ $top_n_key cmp $key;
next unless ($comparison == 1);
# As we will be using these values a few times, extract them into scalars.
for ($i = 0; $i < $n_minus_1; $i++) {
$top_n_key = $top_n_keys[$i];
if ( ($top_n_key eq '_') ||
- ( ($value1 <=> $href1->{$top_n_key} ||
+ ( ($value1 <=> $href1->{$top_n_key} ||
$value2 <=> $href2->{$top_n_key} ||
- $value3 <=> $href3->{$top_n_key} ||
- $top_n_key cmp $key) == 1
- )
- ) {
- $insert_position = $i;
- last;
+ $value3 <=> $href3->{$top_n_key} ||
+ $top_n_key cmp $key) == 1
+ )
+ ) {
+ $insert_position = $i;
+ last;
}
}
eximstats Version $VERSION
-Usage: eximstats [Options] mainlog1 mainlog2 ... > report.txt
- eximstats -html [Options] mainlog1 mainlog2 ... > report.html
- eximstats -merge [Options] report.1.txt report.2.txt ... > weekly_rep.txt
- eximstats -merge -html [Options] report.1.html ... > weekly_rep.html
+Usage:
+ eximstats [Output] [Options] mainlog1 mainlog2 ...
+ eximstats -merge -html [Options] report.1.html ... > weekly_rep.html
+
+Examples:
+ eximstats -html=eximstats.html mainlog1 mainlog2 ...
+ eximstats mainlog1 mainlog2 ... > report.txt
Parses exim mainlog or syslog files and generates a statistical analysis
-of the messages processed. Valid options are:
+of the messages processed.
+
+Valid output types are:
+-txt[=<file>] plain text (default unless no other type is specified)
+-html[=<file>] HTML
+-xls[=<file>] Excel
+With no type and file given, defaults to -txt and STDOUT.
+Valid options are:
-h<number> histogram divisions per hour. The default is 1, and
0 suppresses histograms. Other valid values are:
- 2, 3, 5, 10, 15, 20, 30 or 60.
+ 2, 3, 5, 10, 15, 20, 30 or 60.
-ne don't display error information
-nr don't display relaying information
-nr/pattern/ don't display relaying information that matches
-nt don't display transport information
-nt/pattern/ don't display transport information that matches
--nvr don't do volume rounding. Display in bytes, not KB/MB/GB.
+-nvr don't do volume rounding. Display in bytes, not KB/MB/GB.
-q<list> list of times for queuing information
single 0 item suppresses
-t<number> display top <number> sources/destinations
default is 50, 0 suppresses top listing
-tnl omit local sources/destinations in top listing
-t_remote_users show top user sources/destinations from non-local domains
+-include_original_destination show both the final and original
+ destinations in the results rather than just the final ones.
--byhost show results by sending host (default unless bydomain or
+-byhost show results by sending host (default unless bydomain or
byemail is specified)
--bydomain show results by sending domain.
--byemail show results by sender's email address
--byedomain show results by sender's email domain
+-bydomain show results by sending domain.
+-byemail show results by sender's email address
+-byedomain show results by sender's email domain
-pattern "Description" /pattern/
Count lines matching specified patterns and show them in
- the results. It can be specified multiple times. Eg:
- -pattern 'Refused connections' '/refused connection/'
+ the results. It can be specified multiple times. Eg:
+ -pattern 'Refused connections' '/refused connection/'
-merge merge previously generated reports into a new report
--html output the results in HTML
--charts Create charts (this requires the GD::Graph modules)
+-charts Create charts (this requires the GD::Graph modules).
+ Only valid with -html.
-chartdir <dir> Create the charts' png files in the directory <dir>
-chartrel <dir> Specify the relative directory for the "img src=" tags
from where to include the charts in the html file
- -chartdir and -chartrel default to '.'
+ -chartdir and -chartrel default to '.'
--d Debug mode - dump the eval'ed parser onto STDERR.
+-d Debug mode - dump the eval'ed parser onto STDERR.
EoText
#ENDIF ($transport_pattern)
- $host = "local"; #Host is local unless otherwise specified.
- $domain = "localdomain"; #Domain is localdomain unless otherwise specified.
+ $host = "local"; #Host is local unless otherwise specified.
+ $domain = "localdomain"; #Domain is localdomain unless otherwise specified.
# Do some pattern matches to get the host and IP address.
#IFDEF ($do_sender{Domain})
if ($host !~ /^\\[/ && $host =~ /^(\\(?)[^\\.]+\\.([^\\.]+\\..*)/) {
- # Remove the host portion from the DNS name. We ensure that we end up with
- # at least xxx.yyy. $host can be "(x.y.z)" or "x.y.z".
- $domain = lc("$1.$2");
- $domain =~ s/^\\.//; #Remove preceding dot.
+ # Remove the host portion from the DNS name. We ensure that we end up
+ # with at least xxx.yyy. $host can be "(x.y.z)" or "x.y.z".
+ $domain = lc("$1.$2");
+ $domain =~ s/^\\.//; #Remove preceding dot.
}
#ENDIF ($do_sender{Domain})
}
#IFDEF ($do_sender{Email})
- $email = (/^(\S+)/) ? $1 : "";
+ #IFDEF ($include_original_destination)
+ # Catch both "a@b.com <c@d.com>" and "e@f.com"
+ #$email = (/^(\S+) (<(\S*?)>)?/) ? $3 || $1 : "";
+ $email = (/^(\S+ (<[^@>]+@?[^>]*>)?)/) ? $1 : "";
+ chomp($email);
+ #ENDIF ($include_original_destination)
+
+ #IFNDEF ($include_original_destination)
+ $email = (/^(\S+)/) ? $1 : "";
+ #ENDIF ($include_original_destination)
#ENDIF ($do_sender{Email})
#IFDEF ($do_sender{Edomain})
- $edomain = (/^\S*?\\@(\S+)/) ? lc($1) : "";
+ #IFDEF ($include_original_destination)
+ #$edomain = (/^(\S+) (<\S*?\\@(\S+)>)?/) ? $3 || $1 : "";
+ $edomain = (/^(\S+ (<\S*?\\@(\S+?)>)?)/) ? $1 : "";
+ chomp($edomain);
+ lc($edomain);
+ #ENDIF ($include_original_destination)
+
+ #IFNDEF ($include_original_destination)
+ $edomain = (/^\S*?\\@(\S+)/) ? lc($1) : "";
+ #ENDIF ($include_original_destination)
#ENDIF ($do_sender{Edomain})
if ($tod lt $begin) {
#IFDEF ($show_relay)
if ($host ne "local") {
- # Save incoming information in case it becomes interesting
- # later, when delivery lines are read.
- my($from) = /^(\\S+)/;
- $from_host{$id} = "$host$ip";
- $from_address{$id} = $from;
+ # Save incoming information in case it becomes interesting
+ # later, when delivery lines are read.
+ my($from) = /^(\\S+)/;
+ $from_host{$id} = "$host$ip";
+ $from_address{$id} = $from;
}
#ENDIF ($show_relay)
#IFDEF ($local_league_table || $include_remote_users)
- if (/\sU=(\\S+)/) {
- my $user = $1;
+ if (/\sU=(\\S+)/) {
+ my $user = $1;
- #IFDEF ($local_league_table && $include_remote_users)
- { #Store both local and remote users.
- #ENDIF ($local_league_table && $include_remote_users)
+ #IFDEF ($local_league_table && $include_remote_users)
+ { #Store both local and remote users.
+ #ENDIF ($local_league_table && $include_remote_users)
- #IFDEF ($local_league_table && ! $include_remote_users)
- if ($host eq "local") { #Store local users only.
- #ENDIF ($local_league_table && ! $include_remote_users)
+ #IFDEF ($local_league_table && ! $include_remote_users)
+ if ($host eq "local") { #Store local users only.
+ #ENDIF ($local_league_table && ! $include_remote_users)
- #IFDEF ($include_remote_users && ! $local_league_table)
- if ($host ne "local") { #Store remote users only.
- #ENDIF ($include_remote_users && ! $local_league_table)
+ #IFDEF ($include_remote_users && ! $local_league_table)
+ if ($host ne "local") { #Store remote users only.
+ #ENDIF ($include_remote_users && ! $local_league_table)
- $received_count_user{$user}++;
- add_volume(\\$received_data_user{$user},\\$received_data_gigs_user{$user},$thissize);
+ $received_count_user{$user}++;
+ add_volume(\\$received_data_user{$user},\\$received_data_gigs_user{$user},$thissize);
}
- }
+ }
#ENDIF ($local_league_table || $include_remote_users)
#IFDEF ($do_sender{Host})
- $received_count{Host}{$host}++;
- add_volume(\\$received_data{Host}{$host},\\$received_data_gigs{Host}{$host},$thissize);
+ $received_count{Host}{$host}++;
+ add_volume(\\$received_data{Host}{$host},\\$received_data_gigs{Host}{$host},$thissize);
#ENDIF ($do_sender{Host})
#IFDEF ($do_sender{Domain})
if ($domain) {
- $received_count{Domain}{$domain}++;
- add_volume(\\$received_data{Domain}{$domain},\\$received_data_gigs{Domain}{$domain},$thissize);
- }
+ $received_count{Domain}{$domain}++;
+ add_volume(\\$received_data{Domain}{$domain},\\$received_data_gigs{Domain}{$domain},$thissize);
+ }
#ENDIF ($do_sender{Domain})
#IFDEF ($do_sender{Email})
- $received_count{Email}{$email}++;
- add_volume(\\$received_data{Email}{$email},\\$received_data_gigs{Email}{$email},$thissize);
+ $received_count{Email}{$email}++;
+ add_volume(\\$received_data{Email}{$email},\\$received_data_gigs{Email}{$email},$thissize);
#ENDIF ($do_sender{Email})
#IFDEF ($do_sender{Edomain})
- $received_count{Edomain}{$edomain}++;
- add_volume(\\$received_data{Edomain}{$edomain},\\$received_data_gigs{Edomain}{$edomain},$thissize);
+ $received_count{Edomain}{$edomain}++;
+ add_volume(\\$received_data{Edomain}{$edomain},\\$received_data_gigs{Edomain}{$edomain},$thissize);
#ENDIF ($do_sender{Edomain})
$total_received_count++;
add_volume(\\$total_received_data,\\$total_received_data_gigs,$thissize);
#IFDEF ($#queue_times >= 0)
- $arrival_time{$id} = $tod;
+ $arrival_time{$id} = $tod;
#ENDIF ($#queue_times >= 0)
#IFDEF ($hist_opt > 0)
- $received_interval_count[($m_hour*60 + $m_min)/$hist_interval]++;
+ $received_interval_count[($m_hour*60 + $m_min)/$hist_interval]++;
#ENDIF ($hist_opt > 0)
}
if (defined $from_host{$id}) {
if (/^(\\S+)(?:\\s+\\([^)]\\))?\\s+<([^>]+)>/) {
($old,$new) = ($1,$2);
- }
+ }
else {
- $old = $new = "";
- }
+ $old = $new = "";
+ }
if ("\\L$new" eq "\\L$old") {
($old) = /^(\\S+)/ if $old eq "";
if (!defined $relay_pattern || $key !~ /$relay_pattern/o) {
$relayed{$key} = 0 if !defined $relayed{$key};
$relayed{$key}++;
- }
+ }
else {
- $relayed_unshown++
+ $relayed_unshown++
}
}
}
}
#IFDEF ($local_league_table || $include_remote_users)
- #IFDEF ($local_league_table && $include_remote_users)
- { #Store both local and remote users.
- #ENDIF ($local_league_table && $include_remote_users)
-
- #IFDEF ($local_league_table && ! $include_remote_users)
- if ($host eq "local") { #Store local users only.
- #ENDIF ($local_league_table && ! $include_remote_users)
-
- #IFDEF ($include_remote_users && ! $local_league_table)
- if ($host ne "local") { #Store remote users only.
- #ENDIF ($include_remote_users && ! $local_league_table)
-
- if (my($user) = split((/\\s</)? " <" : " ", $_)) {
- if ($user =~ /^[\\/|]/) {
- my($parent) = $_ =~ /(<[^@]+@?[^>]*>)/;
- $user = "$user $parent" if defined $parent;
- }
- $delivered_count_user{$user}++;
- add_volume(\\$delivered_data_user{$user},\\$delivered_data_gigs_user{$user},$size);
- }
- }
+ #IFDEF ($local_league_table && $include_remote_users)
+ { #Store both local and remote users.
+ #ENDIF ($local_league_table && $include_remote_users)
+
+ #IFDEF ($local_league_table && ! $include_remote_users)
+ if ($host eq "local") { #Store local users only.
+ #ENDIF ($local_league_table && ! $include_remote_users)
+
+ #IFDEF ($include_remote_users && ! $local_league_table)
+ if ($host ne "local") { #Store remote users only.
+ #ENDIF ($include_remote_users && ! $local_league_table)
+
+ if (my($user) = split((/\\s</)? " <" : " ", $_)) {
+ #IFDEF ($include_original_destination)
+ {
+ #ENDIF ($include_original_destination)
+ #IFNDEF ($include_original_destination)
+ if ($user =~ /^[\\/|]/) {
+ #ENDIF ($include_original_destination)
+ my($parent) = $_ =~ /(<[^@]+@?[^>]*>)/;
+ $user = "$user $parent" if defined $parent;
+ }
+ $delivered_count_user{$user}++;
+ add_volume(\\$delivered_data_user{$user},\\$delivered_data_gigs_user{$user},$size);
+ }
+ }
#ENDIF ($local_league_table || $include_remote_users)
#IFDEF ($do_sender{Host})
- $delivered_count{Host}{$host}++;
- add_volume(\\$delivered_data{Host}{$host},\\$delivered_data_gigs{Host}{$host},$size);
+ $delivered_count{Host}{$host}++;
+ add_volume(\\$delivered_data{Host}{$host},\\$delivered_data_gigs{Host}{$host},$size);
#ENDIF ($do_sender{Host})
#IFDEF ($do_sender{Domain})
if ($domain) {
- $delivered_count{Domain}{$domain}++;
- add_volume(\\$delivered_data{Domain}{$domain},\\$delivered_data_gigs{Domain}{$domain},$size);
- }
+ $delivered_count{Domain}{$domain}++;
+ add_volume(\\$delivered_data{Domain}{$domain},\\$delivered_data_gigs{Domain}{$domain},$size);
+ }
#ENDIF ($do_sender{Domain})
#IFDEF ($do_sender{Email})
- $delivered_count{Email}{$email}++;
- add_volume(\\$delivered_data{Email}{$email},\\$delivered_data_gigs{Email}{$email},$size);
+ $delivered_count{Email}{$email}++;
+ add_volume(\\$delivered_data{Email}{$email},\\$delivered_data_gigs{Email}{$email},$size);
#ENDIF ($do_sender{Email})
#IFDEF ($do_sender{Edomain})
- $delivered_count{Edomain}{$edomain}++;
- add_volume(\\$delivered_data{Edomain}{$edomain},\\$delivered_data_gigs{Edomain}{$edomain},$size);
+ $delivered_count{Edomain}{$edomain}++;
+ add_volume(\\$delivered_data{Edomain}{$edomain},\\$delivered_data_gigs{Edomain}{$edomain},$size);
#ENDIF ($do_sender{Edomain})
$total_delivered_count++;
my($queued);
if (defined $arrival_time{$id}) {
$queued = seconds($tod) - seconds($arrival_time{$id});
- delete($arrival_time{$id});
+ delete($arrival_time{$id});
}
else {
- $queued = seconds($tod) - id_seconds($id);
+ $queued = seconds($tod) - id_seconds($id);
}
for ($i = 0; $i <= $#queue_times; $i++) {
$queue_bin[$i]++;
$remote_queue_bin[$i]++ if $remote_delivered{$id};
last;
- }
- }
+ }
+ }
$queue_more_than++ if $i > $#queue_times;
#ENDIF ($#queue_times >= 0)
my(%defines_in_operation,$removing_lines,$processed_parser);
foreach (split (/\n/,$parser)) {
if ((/^\s*#\s*IFDEF\s*\((.*?)\)/i && ! eval $1) ||
- (/^\s*#\s*IFNDEF\s*\((.*?)\)/i && eval $1) ) {
+ (/^\s*#\s*IFNDEF\s*\((.*?)\)/i && eval $1) ) {
$defines_in_operation{$1} = 1;
$removing_lines = 1;
}
if (/^\s*#\s*ENDIF\s*\((.*?)\)/i) {
delete $defines_in_operation{$1};
unless (keys %defines_in_operation) {
- $removing_lines = 0;
+ $removing_lines = 0;
}
}
}
#######################################################################
sub print_header {
+
my $title = "Exim statistics from $begin to $end";
- if ($html) {
- print html_header($title);
- print "<ul>\n";
- print "<li><a href=\"#grandtotal\">Grand total summary</a>\n";
- print "<li><a href=\"#patterns\">User Specified Patterns</a>\n" if @user_patterns;
- print "<li><a href=\"#transport\">Deliveries by Transport</a>\n" if $show_transport;
+ print $txt_fh "\n$title\n" if $txt_fh;
+ if ($htm_fh) {
+ print $htm_fh html_header($title);
+ print $htm_fh "<ul>\n";
+ print $htm_fh "<li><a href=\"#grandtotal\">Grand total summary</a>\n";
+ print $htm_fh "<li><a href=\"#patterns\">User Specified Patterns</a>\n" if @user_patterns;
+ print $htm_fh "<li><a href=\"#transport\">Deliveries by Transport</a>\n" if $show_transport;
if ($hist_opt) {
- print "<li><a href=\"#Messages received\">Messages received per hour</a>\n";
- print "<li><a href=\"#Deliveries\">Deliveries per hour</a>\n";
+ print
$htm_fh "<li><a href=\"#Messages received\">Messages received per hour</a>\n";
+ print
$htm_fh "<li><a href=\"#Deliveries\">Deliveries per hour</a>\n";
}
if ($#queue_times >= 0) {
- print "<li><a href=\"#all messages time\">Time spent on the queue: all messages</a>\n";
- print "<li><a href=\"#messages with at least one remote delivery time\">Time spent on the queue: messages with at least one remote delivery</a>\n";
+ print
$htm_fh "<li><a href=\"#all messages time\">Time spent on the queue: all messages</a>\n";
+ print
$htm_fh "<li><a href=\"#messages with at least one remote delivery time\">Time spent on the queue: messages with at least one remote delivery</a>\n";
}
- print "<li><a href=\"#Relayed messages\">Relayed messages</a>\n" if $show_relay;
+ print
$htm_fh "<li><a href=\"#Relayed messages\">Relayed messages</a>\n" if $show_relay;
if ($topcount) {
foreach ('Host','Domain','Email','Edomain') {
- next unless $do_sender{$_};
-
print "<li><a href=\"#sending \l$_ count\">Top $topcount sending \l${_}s by message count</a>\n";
-
print "<li><a href=\"#sending \l$_ volume\">Top $topcount sending \l${_}s by volume</a>\n";
+ next unless $do_sender{$_};
+
print $htm_fh "<li><a href=\"#sending \l$_ count\">Top $topcount sending \l${_}s by message count</a>\n";
+
print $htm_fh "<li><a href=\"#sending \l$_ volume\">Top $topcount sending \l${_}s by volume</a>\n";
}
if ($local_league_table || $include_remote_users) {
-
print "<li><a href=\"#local sender count\">Top $topcount local senders by message count</a>\n";
-
print "<li><a href=\"#local sender volume\">Top $topcount local senders by volume</a>\n";
+
print $htm_fh "<li><a href=\"#local sender count\">Top $topcount local senders by message count</a>\n";
+
print $htm_fh "<li><a href=\"#local sender volume\">Top $topcount local senders by volume</a>\n";
}
foreach ('Host','Domain','Email','Edomain') {
- next unless $do_sender{$_};
-
print "<li><a href=\"#\l$_ destination count\">Top $topcount \l$_ destinations by message count</a>\n";
-
print "<li><a href=\"#\l$_ destination volume\">Top $topcount \l$_ destinations by volume</a>\n";
+ next unless $do_sender{$_};
+
print $htm_fh "<li><a href=\"#\l$_ destination count\">Top $topcount \l$_ destinations by message count</a>\n";
+
print $htm_fh "<li><a href=\"#\l$_ destination volume\">Top $topcount \l$_ destinations by volume</a>\n";
}
if ($local_league_table || $include_remote_users) {
-
print "<li><a href=\"#local destination count\">Top $topcount local destinations by message count</a>\n";
-
print "<li><a href=\"#local destination volume\">Top $topcount local destinations by volume</a>\n";
+
print $htm_fh "<li><a href=\"#local destination count\">Top $topcount local destinations by message count</a>\n";
+
print $htm_fh "<li><a href=\"#local destination volume\">Top $topcount local destinations by volume</a>\n";
}
}
- print "<li><a href=\"#errors\">List of errors</a>\n" if %errors_count;
- print "</ul>\n<hr>\n";
-
+ print $htm_fh "<li><a href=\"#errors\">List of errors</a>\n" if %errors_count;
+ print $htm_fh "</ul>\n<hr>\n";
}
- else {
- print "\n$title\n";
+ if ($xls_fh)
+ {
+ $ws_global->write($row++, $col+0, "Exim Statistics", $f_header1);
+ &set_worksheet_line($ws_global, $row, $col, ["from:", $begin, "to:", $end], $f_default);
+ $row+=2;
}
}
# different numbers of columns.
my($sender_txt_header,$sender_html_header,$sender_txt_format,$sender_html_format);
my(@received_totals,@delivered_totals);
+ my($row_tablehead, $row_max);
+
foreach ('Host','Domain','Email','Edomain') {
next unless $do_sender{$_};
if ($merge_reports) {
$sender_txt_format .= " " x ($COLUMN_WIDTHS - 5) . "%6d";
}
- my($format1,$format2);
- if ($html) {
- print << "EoText";
-<a name="grandtotal"></a>
-<h2>Grand total summary</h2>
-<table border=1>
-<tr><th>TOTAL</th><th>Volume</th><th>Messages</th>$sender_html_header<th colspan=2>At least one addr<br>Delayed</th><th colspan=2>At least one addr<br>Failed</th>
-EoText
+ my $txt_format1 = " %-16s %9s %6d $sender_txt_format";
+ my $txt_format2 = " %6d %4.1f%% %6d %4.1f%%",
+ my $htm_format1 = "<tr><td>%s</td><td align=\"right\">%s</td>$sender_html_format<td align=\"right\">%d</td>";
+ my $htm_format2 = "<td align=\"right\">%d</td><td align=\"right\">%4.1f%%</td><td align=\"right\">%d</td><td align=\"right\">%4.1f%%</td>";
- $format1 = "<tr><td>%s</td><td align=\"right\">%s</td>$sender_html_format<td align=\"right\">%d</td>";
- $format2 = "<td align=\"right\">%d</td><td align=\"right\">%4.1f%%</td><td align=\"right\">%d</td><td align=\"right\">%4.1f%%</td>";
- }
- else {
+ if ($txt_fh) {
my $sender_spaces = " " x length($sender_txt_header);
- print << "EoText";
+ print $txt_fh "\n";
+ print $txt_fh "Grand total summary\n";
+ print $txt_fh "-------------------\n";
+ print $txt_fh " $sender_spaces At least one address\n";
+ print $txt_fh " TOTAL Volume Messages $sender_txt_header Delayed Failed\n";
+ }
+ if ($htm_fh) {
+ print $htm_fh "<a name=\"grandtotal\"></a>\n";
+ print $htm_fh "<h2>Grand total summary</h2>\n";
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th>TOTAL</th><th>Volume</th><th>Messages</th>$sender_html_header<th colspan=2>At least one addr<br>Delayed</th><th colspan=2>At least one addr<br>Failed</th>\n";
+ }
+ if ($xls_fh)
+ {
+ $ws_global->write($row++, $col, "Grand total summary", $f_header2);
-Grand total summary
--------------------
- $sender_spaces At least one address
- TOTAL Volume Messages $sender_txt_header Delayed Failed
-EoText
- $format1 = " %-16s %9s %6d $sender_txt_format";
- $format2 = " %6d %4.1f%% %6d %4.1f%%",
+ $row_tablehead = $row+1; # header-row of TOTALS table
+
+ &set_worksheet_line($ws_global, $row_tablehead, 0, ['Received', 'Delivered', 'TOTAL'], $f_headertab);
+
+ my @content= (
+ "Volume",
+ "Messages",
+ $sender_txt_header,
+ "At least one address Delayed (Total)",
+ "At least one address Delayed (Percent)",
+ "At least one address Failed (Total)",
+ "At least one address Failed (Percent)"
+ );
+
+ for (my $i=0; $i < scalar(@content); $i++)
+ {
+ $ws_global->write($row_tablehead+$i+1, 2, $content[$i], $f_default);
+ $row++;
+ }
+ $row_max = $row_tablehead+scalar(@content)+2; # continue from this row
}
+
+
my($volume,$failed_count);
if ($merge_reports) {
$volume = volume_rounded($report_totals{Received}{Volume}, $report_totals{Received}{'Volume-gigs'});
{
no integer;
- printf("$format1$format2\n",'Received',$volume,$total_received_count,
- @received_totals,$delayed_count,
- ($total_received_count) ? ($delayed_count*100/$total_received_count) : 0,
- $failed_count,
- ($total_received_count) ? ($failed_count*100/$total_received_count) : 0);
- }
+ my @content=(
+ $volume,$total_received_count,
+ @received_totals,
+ $delayed_count,
+ ($total_received_count) ? ($delayed_count*100/$total_received_count) : 0,
+ $failed_count,
+ ($total_received_count) ? ($failed_count*100/$total_received_count) : 0
+ );
+
+ printf $txt_fh ("$txt_format1$txt_format2\n", 'Received', @content) if $txt_fh;
+ printf $htm_fh ("$htm_format1$htm_format2\n", 'Received', @content) if $htm_fh;
+ if ($xls_fh)
+ {
+ $row = $row_tablehead+1;
+ for (my $i=0; $i < scalar(@content); $i++)
+ {
+ if ($i == 4 || $i == 6) {
+ $ws_global->write($row+$i, 0, $content[$i]/100, $f_percent);
+ }
+ else {
+ $ws_global->write($row+$i, 0, $content[$i], $f_default);
+ }
+ }
+ }
+ }
if ($merge_reports) {
$volume = volume_rounded($report_totals{Delivered}{Volume}, $report_totals{Delivered}{'Volume-gigs'});
$total_delivered_count = get_report_total($report_totals{Delivered},'Messages');
else {
$volume = volume_rounded($total_delivered_data, $total_delivered_data_gigs);
}
- printf("$format1\n\n",'Delivered',$volume,$total_delivered_count,@delivered_totals);
- print "</table>\n" if $html;
+
+ my @content=($volume, $total_delivered_count, @delivered_totals);
+ printf $txt_fh ("$txt_format1\n\n", 'Delivered', @content) if $txt_fh;
+ printf $htm_fh ("$htm_format1\n\n", 'Delivered', @content) if $htm_fh;
+ printf $htm_fh "</table>\n" if $htm_fh;
+ if ($xls_fh)
+ {
+
+ $row = $row_tablehead+1;
+ for (my $i=0; $i < scalar(@content); $i++)
+ {
+ $ws_global->write($row+$i, 1, $content[$i], $f_default);
+ }
+ $row = $row_max;
+ }
}
# Print the counts of user specified patterns.
#######################################################################
sub print_user_patterns {
- my($format1);
+ my $txt_format1 = " %-18s %6d";
+ my $htm_format1 = "<tr><td>%s</td><td align=\"right\">%d</td>";
- if ($html) {
- print "<hr><a name=\"patterns\"></a><h2>User Specified Patterns</h2>\n";
- print "<table border=0 width=\"100%\">\n";
- print "<tr><td>\n";
- print "<table border=1>\n";
- print "<tr><th> </th><th>Total</th>\n";
- $format1 = "<tr><td>%s</td><td align=\"right\">%d</td>";
+ if ($txt_fh) {
+ print $txt_fh "User Specified Patterns\n";
+ print $txt_fh "-----------------------";
+ print $txt_fh "\n Total\n";
}
- else {
- print "User Specified Patterns\n";
- print "-----------------------";
- print "\n Total\n";
- $format1 = " %-18s %6d";
+ if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"patterns\"></a><h2>User Specified Patterns</h2>\n";
+ print $htm_fh "<table border=0 width=\"100%\">\n";
+ print $htm_fh "<tr><td>\n";
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th> </th><th>Total</th>\n";
+ }
+ if ($xls_fh) {
+ $ws_global->write($row++, $col, "User Specified Patterns", $f_header2);
+ &set_worksheet_line($ws_global, $row++, 1, ["Total"], $f_headertab);
}
+
my($key);
if ($merge_reports) {
# We are getting our data from previous reports.
foreach $key (@user_descriptions) {
my $count = get_report_total($report_totals{patterns}{$key},'Total');
- printf("$format1\n",$key,$count);
+ printf $txt_fh ("$txt_format1\n",$key,$count) if $txt_fh;
+ printf $htm_fh ("$htm_format1\n",$key,$count) if $htm_fh;
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_global, $row++, 0, [$key,$count], $f_default);
+ }
}
}
else {
# We are getting our data from mainlog files.
my $user_pattern_index = 0;
foreach $key (@user_descriptions) {
- printf("$format1\n",$key,$user_pattern_totals[$user_pattern_index]);
+ printf $txt_fh ("$txt_format1\n",$key,$user_pattern_totals[$user_pattern_index]) if $txt_fh;
+ printf $htm_fh ("$htm_format1\n",$key,$user_pattern_totals[$user_pattern_index]) if $htm_fh;
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_global, $row++, 0, [$key,$user_pattern_totals[$user_pattern_index]]);
+ }
$user_pattern_index++;
}
}
- if ($html) {
- print "</table>\n";
+ print $txt_fh "\n" if $txt_fh;
+ print $htm_fh "</table>\n\n" if $htm_fh;
+ if ($xls_fh)
+ {
+ ++$row;
}
- print "\n";
}
# Print totals by transport.
#######################################################################
sub print_transport {
- my($format1);
my(@chartdatanames);
my(@chartdatavals_count);
my(@chartdatavals_vol);
- no integer; #Lose this for charting the data.
+ no integer; #Lose this for charting the data.
+
+ my $txt_format1 = " %-18s %6s %6d";
+ my $htm_format1 = "<tr><td>%s</td><td align=\"right\">%s</td><td align=\"right\">%d</td>";
- if ($html) {
- print "<hr><a name=\"transport\"></a><h2>Deliveries by Transport</h2>\n";
- print "<table border=0 width=\"100%\">\n";
- print "<tr><td>\n";
- print "<table border=1>\n";
- print "<tr><th> </th><th>Volume</th><th>Messages</th>\n";
- $format1 = "<tr><td>%s</td><td align=\"right\">%s</td><td align=\"right\">%d</td>";
+ if ($txt_fh) {
+ print $txt_fh "Deliveries by transport\n";
+ print $txt_fh "-----------------------";
+ print $txt_fh "\n Volume Messages\n";
}
- else {
- print "Deliveries by transport\n";
- print "-----------------------";
- print "\n Volume Messages\n";
- $format1 = " %-18s %6s %6d";
+ if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"transport\"></a><h2>Deliveries by Transport</h2>\n";
+ print $htm_fh "<table border=0 width=\"100%\">\n";
+ print $htm_fh "<tr><td>\n";
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th> </th><th>Volume</th><th>Messages</th>\n";
+ }
+ if ($xls_fh) {
+ $ws_global->write($row++, $col, "Deliveries by transport", $f_header2);
+ &set_worksheet_line($ws_global, $row++, 1, ["Volume", "Messages"], $f_headertab);
}
my($key);
# We are getting our data from previous reports.
foreach $key (sort keys %{$report_totals{transport}}) {
my $count = get_report_total($report_totals{transport}{$key},'Messages');
- printf("$format1\n",$key,
- volume_rounded($report_totals{transport}{$key}{Volume},$report_totals{transport}{$key}{'Volume-gigs'}),
- $count);
+ my @content=($key, volume_rounded($report_totals{transport}{$key}{Volume},
+ $report_totals{transport}{$key}{'Volume-gigs'}), $count);
push(@chartdatanames, $key);
push(@chartdatavals_count, $count);
push(@chartdatavals_vol, $report_totals{transport}{$key}{'Volume-gigs'}*$gig + $report_totals{transport}{$key}{Volume} );
+ printf $txt_fh ("$txt_format1\n", @content) if $txt_fh;
+ printf $htm_fh ("$htm_format1\n", @content) if $htm_fh;
+ if ($xls_fh) {
+ &set_worksheet_line($ws_global, $row++, 0, \@content, $f_default);
+ }
}
}
else {
# We are getting our data from mainlog files.
foreach $key (sort keys %transported_data) {
- printf("$format1\n",$key,
- volume_rounded($transported_data{$key},$transported_data_gigs{$key}),
- $transported_count{$key});
+ my @content=($key, volume_rounded($transported_data{$key},$transported_data_gigs{$key}),
+ $transported_count{$key});
push(@chartdatanames, $key);
push(@chartdatavals_count, $transported_count{$key});
push(@chartdatavals_vol, $transported_data_gigs{$key}*$gig + $transported_data{$key});
+ printf $txt_fh ("$txt_format1\n", @content) if $txt_fh;
+ printf $htm_fh ("$htm_format1\n", @content) if $htm_fh;
+ if ($xls_fh) {
+ &set_worksheet_line($ws_global, $row++, 0, \@content);
+ }
}
}
- if ($html) {
- print "</table>\n";
- print "</td><td>\n";
+ print $txt_fh "\n" if $txt_fh;
+ if ($htm_fh) {
+ print $htm_fh "</table>\n";
+ print $htm_fh "</td><td>\n";
if ($HAVE_GD_Graph_pie && $charts)
{
# calculate the graph
);
my $gd = $graph->plot(\@data) or warn($graph->error);
if ($gd) {
- open(IMG, ">$chartdir/transports_count.png") or die $!;
- binmode IMG;
- print IMG $gd->png;
- close IMG;
-
print "<img src=\"$chartrel/transports_count.png\">";
+ open(IMG, ">$chartdir/transports_count.png") or die "Could not write $chartdir/transports_count.png: $!\n";
+ binmode IMG;
+ print IMG $gd->png;
+ close IMG;
+
print $htm_fh "<img src=\"$chartrel/transports_count.png\">";
}
}
- print "</td><td>\n";
+ print $htm_fh "</td><td>\n";
if ($HAVE_GD_Graph_pie && $charts) {
my @data = (
);
my $gd = $graph->plot(\@data) or warn($graph->error);
if ($gd) {
- open(IMG, ">$chartdir/transports_vol.png") or die $!;
- binmode IMG;
- print IMG $gd->png;
- close IMG;
-
print "<img src=\"$chartrel/transports_vol.png\">";
+ open(IMG, ">$chartdir/transports_vol.png") or die "Could not write $chartdir/transports_count.png: $!\n";
+ binmode IMG;
+ print IMG $gd->png;
+ close IMG;
+
print $htm_fh "<img src=\"$chartrel/transports_vol.png\">";
}
}
- print "</td></tr></table>\n";
+ print $htm_fh "</td></tr></table>\n\n";
+ }
+ if ($xls_fh) {
+ $row++;
}
- print "\n";
+
}
# Print our totals by relay.
#######################################################################
sub print_relay {
+ my $row_print_relay=1;
my $temp = "Relayed messages";
- print "<hr><a name=\"$temp\"></a><h2>$temp</h2>\n" if $html;
+ print $htm_fh "<hr><a name=\"$temp\"></a><h2>$temp</h2>\n" if $htm_fh;
if (scalar(keys %relayed) > 0 || $relayed_unshown > 0) {
my $shown = 0;
my $spacing = "";
- my($format);
+ my $txt_format = "%7d %s\n => %s\n";
+ my $htm_format = "<tr><td align=\"right\">%d</td><td>%s</td><td>%s</td>\n";
- if ($html) {
- print "<table border=1>\n";
- print "<tr><th>Count</th><th>From</th><th>To</th>\n";
- $format = "<tr><td align=\"right\">%d</td><td>%s</td><td>%s</td>\n";
+ printf $txt_fh ("%s\n%s\n\n", $temp, "-" x length($temp)) if $txt_fh;
+ if ($htm_fh) {
+ print $htm_fh "<table border=1>\n";
+ print $htm_fh "<tr><th>Count</th><th>From</th><th>To</th>\n";
}
- else {
- printf("%s\n%s\n\n", $temp, "-" x length($temp));
- $format = "%7d %s\n => %s\n";
+ if ($xls_fh) {
+ $ws_relayed->write($row_print_relay++, $col, $temp, $f_header2);
+ &set_worksheet_line($ws_relayed, $row_print_relay++, 0, ["Count", "From", "To"], $f_headertab);
}
+
my($key);
foreach $key (sort keys %relayed) {
my $count = $relayed{$key};
$shown += $count;
$key =~ s/[HA]=//g;
my($one,$two) = split(/=> /, $key);
- printf($format, $count, $one, $two);
+ my @content=($count, $one, $two);
+ printf $txt_fh ($txt_format, @content) if $txt_fh;
+ printf $htm_fh ($htm_format, @content) if $htm_fh;
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_relayed, $row_print_relay++, 0, \@content);
+ }
$spacing = "\n";
}
- print "</table>\n<p>\n" if $html;
- print "${spacing}Total: $shown (plus $relayed_unshown unshown)\n";
+
+ print $htm_fh "</table>\n<p>\n" if $htm_fh;
+ print $txt_fh "${spacing}Total: $shown (plus $relayed_unshown unshown)\n\n" if $txt_fh;
+ print $htm_fh "${spacing}Total: $shown (plus $relayed_unshown unshown)\n\n" if $htm_fh;
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_relayed, $row_print_relay++, 0, [$shown, "Sum of shown" ]);
+ &set_worksheet_line($ws_relayed, $row_print_relay++, 0, [$relayed_unshown, "unshown"]);
+ $row_print_relay++;
+ }
}
else {
- print "No relayed messages\n";
- print "-------------------\n" unless $html;
+ print $txt_fh "No relayed messages\n-------------------\n\n" if $txt_fh;
+ print $htm_fh "No relayed messages\n\n" if $htm_fh;
+ if ($xls_fh)
+ {
+ $row_print_relay++;
+ }
}
- print "\n";
}
#######################################################################
sub print_errors {
my $total_errors = 0;
+ $row=1;
if (scalar(keys %errors_count) != 0) {
my $temp = "List of errors";
- my($format);
- if ($html) {
- print "<hr><a name=\"errors\"></a><h2>$temp</h2>\n";
- print "<ul><li><b>Count - Error</b>\n";
- $format = "<li>%d - %s\n";
+ my $htm_format = "<li>%d - %s\n";
+
+ printf $txt_fh ("%s\n%s\n\n", $temp, "-" x length($temp)) if $txt_fh;
+ if ($htm_fh) {
+ print $htm_fh "<hr><a name=\"errors\"></a><h2>$temp</h2>\n";
+ print $htm_fh "<ul><li><b>Count - Error</b>\n";
}
- else {
- printf("%s\n%s\n\n", $temp, "-" x length($temp));
+ if ($xls_fh)
+ {
+ $ws_errors->write($row++, 0, $temp, $f_header2);
+ &set_worksheet_line($ws_errors, $row++, 0, ["Count", "Error"], $f_headertab);
}
+
my($key);
foreach $key (sort keys %errors_count) {
my $text = $key;
chomp($text);
- $text =~ s/\s\s+/ /g; #Convert multiple spaces to a single space.
+ $text =~ s/\s\s+/ /g; #Convert multiple spaces to a single space.
$total_errors += $errors_count{$key};
- if ($html) {
+
+ if ($txt_fh) {
+ printf $txt_fh ("%5d ", $errors_count{$key});
+ my $text_remaining = $text;
+ while (length($text_remaining) > 65) {
+ my($first,$rest) = $text_remaining =~ /(.{50}\S*)\s+(.+)/;
+ last if !$first;
+ printf $txt_fh ("%s\n\t ", $first);
+ $text_remaining = $rest;
+ }
+ printf $txt_fh ("%s\n\n", $text_remaining);
+ }
+
+ if ($htm_fh) {
#Translate HTML tag characters. Sergey Sholokh.
$text =~ s/\</\<\;/g;
$text =~ s/\>/\>\;/g;
- printf($format,$errors_count{$key},$text);
+ printf $htm_fh ($htm_format,$errors_count{$key},$text);
}
- else {
- printf("%5d ", $errors_count{$key});
- while (length($text) > 65) {
- my($first,$rest) = $text =~ /(.{50}\S*)\s+(.+)/;
- last if !$first;
- printf("%s\n ", $first);
- $text = $rest;
- }
- printf("%s\n\n", $text);
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_errors, $row++, 0, [$errors_count{$key},$text]);
}
}
- print "</ul>\n<p>\n" if $html;
$temp = "Errors encountered: $total_errors";
- print $temp,"\n";
- print "-" x length($temp),"\n" unless $html;
+
+ if ($txt_fh) {
+ print $txt_fh $temp, "\n";
+ print $txt_fh "-" x length($temp),"\n";
+ }
+ if ($htm_fh) {
+ print $htm_fh "</ul>\n<p>\n";
+ print $htm_fh $temp, "\n";
+ }
+ if ($xls_fh)
+ {
+ &set_worksheet_line($ws_errors, $row++, 0, [$total_errors, "Sum of Errors encountered"]);
+ }
}
}
my(%league_table_value_entered, %league_table_value_was_zero, %table_order);
while (<$fh>) {
+ PARSE_OLD_REPORT_LINE:
if (/Exim statistics from ([\d\-]+ [\d:]+(\s+[\+\-]\d+)?) to ([\d\-]+ [\d:]+(\s+[\+\-]\d+)?)/) {
$begin = $1 if ($1 lt $begin);
$end = $3 if ($3 gt $end);
# Fill in $report_totals{Received|Delivered}{Volume|Messages|Hosts|Domains|...|Delayed|DelayedPercent|Failed|FailedPercent}
my(@fields);
while (<$fh>) {
- $_ = html2txt($_); #Convert general HTML markup to text.
- s/At least one addr//g; #Another part of the HTML output we don't want.
+ $_ = html2txt($_); #Convert general HTML markup to text.
+ s/At least one addr//g; #Another part of the HTML output we don't want.
# TOTAL Volume Messages Hosts Domains Delayed Failed
# Received 26MB 237 177 23 8 3.4% 28 11.8%
# Delivered 13MB 233 99 88
- if (/TOTAL\s+(.*?)\s*$/) {
- @fields = split(/\s+/,$1);
+ if (/TOTAL\s+(.*?)\s*$/) {
+ @fields = split(/\s+/,$1);
#Delayed and Failed have two columns each, so add the extra field names in.
- splice(@fields,-1,1,'DelayedPercent','Failed','FailedPercent');
- }
- elsif (/(Received|Delivered)\s+(.*?)\s*$/) {
- print STDERR "Parsing $_" if $debug;
- add_to_totals($report_totals{$1},\@fields,$2);
- }
- last if (/Delivered/); #Last line of this section.
+ splice(@fields,-1,1,'DelayedPercent','Failed','FailedPercent');
+ }
+ elsif (/(Received|Delivered)\s+(.*?)\s*$/) {
+ print STDERR "Parsing $_" if $debug;
+ add_to_totals($report_totals{$1},\@fields,$2);
+ }
+ last if (/Delivered/); #Last line of this section.
}
}
# Total
# Description 85
- while (<$fh>) { last if (/Total/); } #Wait until we get the table headers.
+ while (<$fh>) { last if (/Total/); } #Wait until we get the table headers.
while (<$fh>) {
- print STDERR "Parsing $_" if $debug;
- $_ = html2txt($_); #Convert general HTML markup to text.
- if (/^\s*(.*?)\s+(\d+)\s*$/) {
- $report_totals{patterns}{$1} = {} unless (defined $report_totals{patterns}{$1});
- add_to_totals($report_totals{patterns}{$1},['Total'],$2);
- }
- last if (/^\s*$/); #Finished if we have a blank line.
+ print STDERR "Parsing $_" if $debug;
+ $_ = html2txt($_); #Convert general HTML markup to text.
+ if (/^\s*(.*?)\s+(\d+)\s*$/) {
+ $report_totals{patterns}{$1} = {} unless (defined $report_totals{patterns}{$1});
+ add_to_totals($report_totals{patterns}{$1},['Total'],$2);
+ }
+ last if (/^\s*$/); #Finished if we have a blank line.
}
}
# address_pipe 655KB 1
# smtp 11MB 151
- while (<$fh>) { last if (/Volume/); } #Wait until we get the table headers.
+ while (<$fh>) { last if (/Volume/); } #Wait until we get the table headers.
while (<$fh>) {
- print STDERR "Parsing $_" if $debug;
- $_ = html2txt($_); #Convert general HTML markup to text.
- if (/(\S+)\s+(\d+\S*\s+\d+)/) {
- $report_totals{transport}{$1} = {} unless (defined $report_totals{transport}{$1});
- add_to_totals($report_totals{transport}{$1},['Volume','Messages'],$2);
- }
- last if (/^\s*$/); #Finished if we have a blank line.
+ print STDERR "Parsing $_" if $debug;
+ $_ = html2txt($_); #Convert general HTML markup to text.
+ if (/(\S+)\s+(\d+\S*\s+\d+)/) {
+ $report_totals{transport}{$1} = {} unless (defined $report_totals{transport}{$1});
+ add_to_totals($report_totals{transport}{$1},['Volume','Messages'],$2);
+ }
+ last if (/^\s*$/); #Finished if we have a blank line.
}
}
elsif (/(Messages received|Deliveries) per/) {
my $interval_aref = ($1 eq 'Deliveries') ? \@delivered_interval_count : \@received_interval_count;
my $reached_table = 0;
while (<$fh>) {
- $reached_table = 1 if (/^00/);
- next unless $reached_table;
- print STDERR "Parsing $_" if $debug;
- if (/^(\d+):(\d+)\s+(\d+)/) { #hh:mm start time format ?
- $$interval_aref[($1*60 + $2)/$hist_interval] += $3 if $hist_opt;
- }
- elsif (/^(\d+)-(\d+)\s+(\d+)/) { #hh-hh start-end time format ?
- $$interval_aref[($1*60)/$hist_interval] += $3 if $hist_opt;
- }
- else { #Finished the table ?
- last;
- }
+ $reached_table = 1 if (/^00/);
+ next unless $reached_table;
+ print STDERR "Parsing $_" if $debug;
+ if (/^(\d+):(\d+)\s+(\d+)/) { #hh:mm start time format ?
+ $$interval_aref[($1*60 + $2)/$hist_interval] += $3 if $hist_opt;
+ }
+ elsif (/^(\d+)-(\d+)\s+(\d+)/) { #hh-hh start-end time format ?
+ $$interval_aref[($1*60)/$hist_interval] += $3 if $hist_opt;
+ }
+ else { #Finished the table ?
+ last;
+ }
}
}
my $bin_aref = ($1 eq 'all messages') ? \@queue_bin : \@remote_queue_bin;
my $reached_table = 0;
while (<$fh>) {
- $_ = html2txt($_); #Convert general HTML markup to text.
- $reached_table = 1 if (/^\s*Under/);
- next unless $reached_table;
- my $previous_seconds_on_queue = 0;
- if (/^\s*(Under|Over|)\s+(\d+[smhdw])\s+(\d+)/) {
- print STDERR "Parsing $_" if $debug;
- my($modifier,$formated_time,$count) = ($1,$2,$3);
- my $seconds = unformat_time($formated_time);
- my $time_on_queue = ($seconds + $previous_seconds_on_queue) / 2;
- $previous_seconds_on_queue = $seconds;
- $time_on_queue = $seconds * 2 if ($modifier eq 'Over');
- my($i);
- for ($i = 0; $i <= $#queue_times; $i++) {
- if ($time_on_queue < $queue_times[$i]) {
- $$bin_aref[$i] += $count;
- last;
- }
- }
+ $_ = html2txt($_); #Convert general HTML markup to text.
+ $reached_table = 1 if (/^\s*Under/);
+ next unless $reached_table;
+ my $previous_seconds_on_queue = 0;
+ if (/^\s*(Under|Over|)\s+(\d+[smhdw])\s+(\d+)/) {
+ print STDERR "Parsing $_" if $debug;
+ my($modifier,$formated_time,$count) = ($1,$2,$3);
+ my $seconds = unformat_time($formated_time);
+ my $time_on_queue = ($seconds + $previous_seconds_on_queue) / 2;
+ $previous_seconds_on_queue = $seconds;
+ $time_on_queue = $seconds * 2 if ($modifier eq 'Over');
+ my($i);
+ for ($i = 0; $i <= $#queue_times; $i++) {
+ if ($time_on_queue < $queue_times[$i]) {
+ $$bin_aref[$i] += $count;
+ last;
+ }
+ }
# There's only one counter for messages going over the queue
# times so make sure we only count it once.
$queue_more_than += $count if (($bin_aref == \@queue_bin) && ($i > $#queue_times));
- }
- else {
- last; #Finished the table ?
- }
+ }
+ else {
+ last; #Finished the table ?
+ }
}
}
my $reached_table = 0;
my($count,$sender);
while (<$fh>) {
- unless ($reached_table) {
- last if (/No relayed messages/);
- $reached_table = 1 if (/^\s*\d/ || />\d+</);
- next unless $reached_table;
- }
- if (/>(\d+)<.td><td>(.*?) ?<.td><td>(.*?)</) {
- update_relayed($1,$2,$3);
- }
- elsif (/^\s*(\d+)\s+(.*?)\s*$/) {
- ($count,$sender) = ($1,$2);
- }
- elsif (/=>\s+(.*?)\s*$/) {
- update_relayed($count,$sender,$1);
- }
- else {
- last; #Finished the table ?
- }
+ unless ($reached_table) {
+ last if (/No relayed messages/);
+ $reached_table = 1 if (/^\s*\d/ || />\d+</);
+ next unless $reached_table;
+ }
+ if (/>(\d+)<.td><td>(.*?) ?<.td><td>(.*?)</) {
+ update_relayed($1,$2,$3);
+ }
+ elsif (/^\s*(\d+)\s+(.*?)\s*$/) {
+ ($count,$sender) = ($1,$2);
+ }
+ elsif (/=>\s+(.*?)\s*$/) {
+ update_relayed($count,$sender,$1);
+ }
+ else {
+ last; #Finished the table ?
+ }
}
}
#Set up a hash to record which entries we have already seen
#and one to record which ones we are seeing for the first time.
if ($by_count_or_volume =~ /count/) {
- undef %league_table_value_entered;
- undef %league_table_value_was_zero;
- undef %table_order;
+ undef %league_table_value_entered;
+ undef %league_table_value_was_zero;
+ undef %table_order;
}
#As this section processes multiple different table categories,
my($count_href,$data_href,$data_gigs_href);
if ($category =~ /local sender/) {
$count_href = \%received_count_user;
- $data_href = \%received_data_user;
- $data_gigs_href = \%received_data_gigs_user;
+ $data_href = \%received_data_user;
+ $data_gigs_href = \%received_data_gigs_user;
}
elsif ($category =~ /sending (\S+?)s?\b/) {
#Top 50 sending (host|domain|email|edomain)s
#Top sending (host|domain|email|edomain)
$count_href = \%{$received_count{"\u$1"}};
- $data_href = \%{$received_data{"\u$1"}};
- $data_gigs_href = \%{$received_data_gigs{"\u$1"}};
+ $data_href = \%{$received_data{"\u$1"}};
+ $data_gigs_href = \%{$received_data_gigs{"\u$1"}};
}
elsif ($category =~ /local destination/) {
$count_href = \%delivered_count_user;
- $data_href = \%delivered_data_user;
- $data_gigs_href = \%delivered_data_gigs_user;
+ $data_href = \%delivered_data_user;
+ $data_gigs_href = \%delivered_data_gigs_user;
}
elsif ($category =~ /(\S+) destination/) {
#Top 50 (host|domain|email|edomain) destinations
#Top (host|domain|email|edomain) destination
$count_href = \%{$delivered_count{"\u$1"}};
- $data_href = \%{$delivered_data{"\u$1"}};
- $data_gigs_href = \%{$delivered_data_gigs{"\u$1"}};
+ $data_href = \%{$delivered_data{"\u$1"}};
+ $data_gigs_href = \%{$delivered_data_gigs{"\u$1"}};
}
my $reached_table = 0;
while (<$fh>) {
- $_ = html2txt($_); #Convert general HTML markup to text.
- $reached_table = 1 if (/^\s*\d/);
- next unless $reached_table;
+ # Watch out for empty tables.
+ goto PARSE_OLD_REPORT_LINE if (/<h2>/ or /^[a-zA-Z]/);
+
+ $_ = html2txt($_); #Convert general HTML markup to text.
+
+
+ $reached_table = 1 if (/^\s*\d/);
+ next unless $reached_table;
# Remove optional 'average value' column.
- s/^\s*(\d+)\s+(\S+)\s+(\d+(KB|MB|GB|\b)\s+)/$1 $2 /;
+ s/^\s*(\d+)\s+(\S+)\s+(\d+(KB|MB|GB|\b)\s+)/$1 $2 /;
- if (/^\s*(\d+)\s+(\S+)\s*(.*?)\s*$/) {
- my($count,$rounded_volume,$entry) = ($1,$2,$3);
+ if (/^\s*(\d+)\s+(\S+)\s*(.*?)\s*$/) {
+ my($count,$rounded_volume,$entry) = ($1,$2,$3);
#Note: $entry fields can be both null and can contain spaces.
- #Add the entry into the %table_order hash if it has a rounded volume (KB/MB/GB).
- push(@{$table_order{$rounded_volume}{$by_count_or_volume}},$entry) if ($rounded_volume =~ /\D/);
+ #Add the entry into the %table_order hash if it has a rounded volume (KB/MB/GB).
+ push(@{$table_order{$rounded_volume}{$by_count_or_volume}},$entry) if ($rounded_volume =~ /\D/);
unless ($league_table_value_entered{$entry}) {
- $league_table_value_entered{$entry} = 1;
- unless ($$count_href{$entry}) {
- $$count_href{$entry} = 0;
- $$data_href{$entry} = 0;
- $$data_gigs_href{$entry} = 0;
- $league_table_value_was_zero{$entry} = 1;
- }
-
- $$count_href{$entry} += $count;
+ $league_table_value_entered{$entry} = 1;
+ unless ($$count_href{$entry}) {
+ $$count_href{$entry} = 0;
+ $$data_href{$entry} = 0;
+ $$data_gigs_href{$entry} = 0;
+ $league_table_value_was_zero{$entry} = 1;
+ }
+
+ $$count_href{$entry} += $count;
#Add the rounded value to the data and data_gigs hashes.
- un_round($rounded_volume,\$$data_href{$entry},\$$data_gigs_href{$entry});
- print STDERR "$category by $by_count_or_volume: added $count,$rounded_volume to $entry\n" if $debug;
- }
- }
- else { #Finished the table ?
- if ($by_count_or_volume =~ /volume/) {
- #Add a few bytes to appropriate entries to preserve the order.
-
- my($rounded_volume);
- foreach $rounded_volume (keys %table_order) {
- #For each rounded volume, we want to create a list which has things
- #ordered from the volume table at the front, and additional things
- #from the count table ordered at the back.
- @{$table_order{$rounded_volume}{volume}} = () unless defined $table_order{$rounded_volume}{volume};
- @{$table_order{$rounded_volume}{'message count'}} = () unless defined $table_order{$rounded_volume}{'message count'};
- my(@order,%mark);
- map {$mark{$_} = 1} @{$table_order{$rounded_volume}{volume}};
- @order = @{$table_order{$rounded_volume}{volume}};
- map {push(@order,$_)} grep(!$mark{$_},@{$table_order{$rounded_volume}{'message count'}});
-
- my $bonus_bytes = $#order;
- $bonus_bytes = 511 if ($bonus_bytes > 511); #Don't go over the half-K boundary!
- while (@order and ($bonus_bytes > 0)) {
- my $entry = shift(@order);
- if ($league_table_value_was_zero{$entry}) {
- $$data_href{$entry} += $bonus_bytes;
- print STDERR "$category by $by_count_or_volume: added $bonus_bytes bonus bytes to $entry\n" if $debug;
- }
- $bonus_bytes--;
- }
- }
- }
-
- last;
- }
+ un_round($rounded_volume,\$$data_href{$entry},\$$data_gigs_href{$entry});
+ print STDERR "$category by $by_count_or_volume: added $count,$rounded_volume to $entry\n" if $debug;
+ }
+ }
+ else { #Finished the table ?
+ if ($by_count_or_volume =~ /volume/) {
+ #Add a few bytes to appropriate entries to preserve the order.
+
+ my($rounded_volume);
+ foreach $rounded_volume (keys %table_order) {
+ #For each rounded volume, we want to create a list which has things
+ #ordered from the volume table at the front, and additional things
+ #from the count table ordered at the back.
+ @{$table_order{$rounded_volume}{volume}} = () unless defined $table_order{$rounded_volume}{volume};
+ @{$table_order{$rounded_volume}{'message count'}} = () unless defined $table_order{$rounded_volume}{'message count'};
+ my(@order,%mark);
+ map {$mark{$_} = 1} @{$table_order{$rounded_volume}{volume}};
+ @order = @{$table_order{$rounded_volume}{volume}};
+ map {push(@order,$_)} grep(!$mark{$_},@{$table_order{$rounded_volume}{'message count'}});
+
+ my $bonus_bytes = $#order;
+ $bonus_bytes = 511 if ($bonus_bytes > 511); #Don't go over the half-K boundary!
+ while (@order and ($bonus_bytes > 0)) {
+ my $entry = shift(@order);
+ if ($league_table_value_was_zero{$entry}) {
+ $$data_href{$entry} += $bonus_bytes;
+ print STDERR "$category by $by_count_or_volume: added $bonus_bytes bonus bytes to $entry\n" if $debug;
+ }
+ $bonus_bytes--;
+ }
+ }
+ }
+
+ last;
+ }
}
}
elsif (/List of errors/) {
my $reached_table = 0;
my($count,$error,$blanks);
while (<$fh>) {
- $reached_table = 1 if (/^( *|<li>)(\d+)/);
- next unless $reached_table;
+ $reached_table = 1 if (/^( *|<li>)(\d+)/);
+ next unless $reached_table;
- s/^<li>(\d+) -/$1/; #Convert an HTML line to a text line.
- $_ = html2txt($_); #Convert general HTML markup to text.
+ s/^<li>(\d+) -/$1/; #Convert an HTML line to a text line.
+ $_ = html2txt($_); #Convert general HTML markup to text.
- if (/\t\s*(.*)/) {
- $error .= ' ' . $1; #Join a multiline error.
- }
- elsif (/^\s*(\d+)\s+(.*)/) {
- if ($error) {
+ if (/\t\s*(.*)/) {
+ $error .= ' ' . $1; #Join a multiline error.
+ }
+ elsif (/^\s*(\d+)\s+(.*)/) {
+ if ($error) {
#Finished with a previous multiline error so save it.
- $errors_count{$error} = 0 unless $errors_count{$error};
- $errors_count{$error} += $count;
- }
- ($count,$error) = ($1,$2);
- }
- elsif (/Errors encountered/) {
- if ($error) {
+ $errors_count{$error} = 0 unless $errors_count{$error};
+ $errors_count{$error} += $count;
+ }
+ ($count,$error) = ($1,$2);
+ }
+ elsif (/Errors encountered/) {
+ if ($error) {
#Finished the section, so save our stored last error.
- $errors_count{$error} = 0 unless $errors_count{$error};
- $errors_count{$error} += $count;
- }
- last;
- }
+ $errors_count{$error} = 0 unless $errors_count{$error};
+ $errors_count{$error} += $count;
+ }
+ last;
+ }
}
}
sub add_to_totals {
my($totals_href,$keys_aref,$values) = @_;
my(@values) = split(/\s+/,$values);
- my(@keys) = @$keys_aref; #Make a copy as we destroy the one we use.
+ my(@keys) = @$keys_aref; #Make a copy as we destroy the one we use.
my($value);
foreach $value (@values) {
my $key = shift(@keys) or next;
return $arg;
}
+#######################################################################
+# set_worksheet_line($ws_global, $startrow, $startcol, \@content, $format);
+#
+# set values to a sequence of cells in a row.
+#
+#######################################################################
+sub set_worksheet_line {
+ my ($worksheet, $row, $col, $content, $format) = @_;
+
+ foreach my $token (@$content)
+ {
+ $worksheet->write($row, $col++, $token, $format );
+ }
+}
##################################################
# Main Program #
$topcount = 50;
$local_league_table = 1;
$include_remote_users = 0;
+$include_original_destination = 0;
$hist_opt = 1;
$volume_rounding = 1;
$localtime_offset = calculate_localtime_offset(); # PH/FANF
$last_offset = '';
$offset_seconds = 0;
+$row=1;
+$row_league_table=1;
+$col=0;
+$col_hist=0;
+$run_hist=0;
+my(%output_files); # What output files have been specified?
+
# Decode options
while (@ARGV > 0 && substr($ARGV[0], 0, 1) eq '-')
}
elsif ($ARGV[0] =~ /^-t(\d+)$/) { $topcount = $1 }
elsif ($ARGV[0] =~ /^-tnl$/) { $local_league_table = 0 }
- elsif ($ARGV[0] =~ /^-html$/) { $html = 1 }
+ elsif ($ARGV[0] =~ /^-txt=?(\S*)$/) { $txt_fh = get_filehandle($1,\%output_files) }
+ elsif ($ARGV[0] =~ /^-html=?(\S*)$/) { $htm_fh = get_filehandle($1,\%output_files) }
+ elsif ($ARGV[0] =~ /^-xls=?(\S*)$/) {
+ if ($HAVE_Spreadsheet_WriteExcel) {
+ $xls_fh = get_filehandle($1,\%output_files);
+ }
+ else {
+ warn "WARNING: CPAN Module Spreadsheet::WriteExcel not installed. Obtain from www.cpan.org\n";
+ }
+ }
elsif ($ARGV[0] =~ /^-merge$/) { $merge_reports = 1 }
elsif ($ARGV[0] =~ /^-charts$/) {
$charts = 1;
}
elsif ($ARGV[0] =~ /^-chartdir$/) { $chartdir = $ARGV[1]; shift; $charts_option_specified = 1; }
elsif ($ARGV[0] =~ /^-chartrel$/) { $chartrel = $ARGV[1]; shift; $charts_option_specified = 1; }
- elsif ($ARGV[0] =~ /^-cache$/) { } #Not currently used.
+ elsif ($ARGV[0] =~ /^-include_original_destination$/) { $include_original_destination = 1 }
+ elsif ($ARGV[0] =~ /^-cache$/) { } #Not currently used.
elsif ($ARGV[0] =~ /^-byhost$/) { $do_sender{Host} = 1 }
elsif ($ARGV[0] =~ /^-bydomain$/) { $do_sender{Domain} = 1 }
elsif ($ARGV[0] =~ /^-byemail$/) { $do_sender{Email} = 1 }
shift;
}
+ # keep old default behaviour
+ if (! ($xls_fh or $htm_fh or $txt_fh)) {
+ $txt_fh = \*STDOUT;
+ }
+
# Check that all the charts options are specified.
warn "-charts option not specified. Use -help for help.\n" if ($charts_option_specified && ! $charts);
# Default to display tables by sending Host.
$do_sender{Host} = 1 unless ($do_sender{Domain} || $do_sender{Email} || $do_sender{Edomain});
+ # prepare xls Excel Workbook
+ if (defined $xls_fh)
+ {
+
+ # Create a new Excel workbook
+ $workbook = Spreadsheet::WriteExcel->new($xls_fh);
+
+ # Add worksheets
+ $ws_global = $workbook->addworksheet('Exim Statistik');
+ # show $ws_global as initial sheet
+ $ws_global->set_first_sheet();
+ $ws_global->activate();
+
+ if ($show_relay) {
+ $ws_relayed = $workbook->addworksheet('Relayed Messages');
+ $ws_relayed->set_column(1, 2, 80);
+ }
+ if ($topcount) {
+ $ws_top50 = $workbook->addworksheet('Deliveries');
+ }
+ if ($show_errors) {
+ $ws_errors = $workbook->addworksheet('Errors');
+ }
+
+
+ # set column widths
+ $ws_global->set_column(0, 2, 20); # Columns B-D width set to 30
+ $ws_global->set_column(3, 3, 15); # Columns B-D width set to 30
+ $ws_global->set_column(4, 4, 25); # Columns B-D width set to 30
+
+ # Define Formats
+ $f_default = $workbook->add_format();
+
+ $f_header1 = $workbook->add_format();
+ $f_header1->set_bold();
+ #$f_header1->set_color('red');
+ $f_header1->set_size('15');
+ $f_header1->set_valign();
+ # $f_header1->set_align('center');
+ # $ws_global->write($row++, 2, "Testing Headers 1", $f_header1);
+
+ $f_header2 = $workbook->add_format();
+ $f_header2->set_bold();
+ $f_header2->set_size('12');
+ $f_header2->set_valign();
+ # $ws_global->write($row++, 2, "Testing Headers 2", $f_header2);
+
+ $f_percent = $workbook->add_format();
+ $f_percent->set_num_format('0.0%');
+
+ $f_headertab = $workbook->add_format();
+ $f_headertab->set_bold();
+ $f_headertab->set_valign();
+ # $ws_global->write($row++, 2, "Testing Headers tab", $f_headertab);
+
+ }
+
for (my $i = 0; $i <= $#queue_times; $i++) {
$queue_bin[$i] = 0;
{
if ($hist_opt > 60 || 60 % $hist_opt != 0)
{
- print "Eximstats: -h must specify a factor of 60\n";
+ print STDERR "Eximstats: -h must specify a factor of 60\n";
exit 1;
}
- $hist_interval = 60/$hist_opt; #Interval in minutes.
- $hist_number = (24*60)/$hist_interval; #Number of intervals per day.
+ $hist_interval = 60/$hist_opt; #Interval in minutes.
+ $hist_number = (24*60)/$hist_interval; #Number of intervals per day.
@received_interval_count = (0) x $hist_number;
@delivered_interval_count = (0) x $hist_number;
}
foreach my $file (@ARGV) {
if ($file =~ /\.gz/) {
unless (open(FILE,"gunzip -c $file |")) {
- print STDERR "Failed to gunzip -c $file: $!";
- next;
+ print STDERR "Failed to gunzip -c $file: $!";
+ next;
}
}
elsif ($file =~ /\.Z/) {
unless (open(FILE,"uncompress -c $file |")) {
- print STDERR "Failed to uncompress -c $file: $!";
- next;
+ print STDERR "Failed to uncompress -c $file: $!";
+ next;
}
}
else {
unless (open(FILE,$file)) {
- print STDERR "Failed to read $file: $!";
- next;
+ print STDERR "Failed to read $file: $!";
+ next;
}
}
#Now parse the filehandle, updating the global variables.
if ($begin eq "9999-99-99 99:99:99") {
- print "**** No valid log lines read\n";
+ print STDERR "**** No valid log lines read\n";
exit 1;
}
# Print the error statistics if required.
print_errors() if $show_errors;
-if ($html) {
- print "</body>\n</html>\n"
+print $htm_fh "</body>\n</html>\n" if $htm_fh;
+
+
+$txt_fh->close if $txt_fh;
+$htm_fh->close if $htm_fh;
+
+if ($xls_fh) {
+ # close Excel Workbook
+ $ws_global->set_first_sheet();
+ # FIXME: whyever - activate does not work :-/
+ $ws_global->activate();
+ $workbook->close();
}
+
# End of eximstats
+
+# FIXME: Doku
git://git.exim.org / exim.git / commitdiff