4 This file contains complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.72.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_localhost boolean false smtp 1.73
82 allow_mx_to_ip boolean false main 3.14
83 allow_symlink boolean false appendfile
84 allow_utf8_domains boolean false main 4.14
85 arc_sign string* unset smtp 4.91 with Experimental_ARC
86 auth_advertise_hosts host list "*" main 4.00
87 authenticated_sender string* unset smtp 4.14
88 authenticated_sender_force boolean false smtp 4.61
89 authenticate_hosts host list unset smtp 3.13
90 auto_thaw time 0s main
91 av_scanner string* + main 4.50 with content scan
92 batch_id string unset appendfile 4.00
95 batch_max integer 100 appendfile
98 bcc string* unset autoreply
99 bi_command string unset main
100 body_only boolean false transports 2.05
101 bounce_message_file string* unset main 4.00 expanded from 4.94
102 bounce_message_text string unset main 4.00
103 bounce_return_body boolean true main 4.23
104 bounce_return_message boolean true main 4.00
105 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
106 bounce_sender_authentication string unset main 4.00
107 callout_domain_negative_expire time 3h main 4.11
108 callout_domain_positive_expire time 7d main 4.11
109 callout_negative_expire time 2h main 4.11
110 callout_positive_expire time 24h main 4.11
111 callout_random_local_part string* + main 4.11
112 cannot_route_message string* unset routers 4.11
113 caseful_local_part boolean false routers 4.00
114 cc string* unset autoreply
115 check_ancestor boolean false redirect 4.00
116 check_group boolean false appendfile
118 check_local_user boolean false routers 4.00
119 check_log_inodes integer 0 main
120 check_log_space integer 0 main
121 check_owner boolean true appendfile 3.14
123 check_rfc2047_length boolean true main 4.60
124 check_secondary_mx boolean false dnslookup 4.00
125 check_spool_inodes integer 0 main
126 check_spool_space integer 0 main
127 check_string string "From " appendfile 3.03
129 check_srv string* unset dnslookup 4.31
130 client_authz string* unset gsasl 4.94
131 client_condition string* unset authenticators 4.68
132 client_ignore_invalid_base64 boolean false plaintext 4.61
133 client_name string* + cram_md5 3.10
134 client_password string* unset gsasl 4.94
135 client_secret string* unset cram_md5 3.10
136 client_send string* unset plaintext 3.10
137 unset external (auth) 4.93
138 client_username string* unset gsasl 4.94
139 command string* unset lmtp 3.20
141 unset queryprogram 4.00
142 command_group string unset queryprogram 4.00
143 command_timeout time 5m smtp
144 command_user string unset queryprogram 4.00
145 commandline_checks_require_admin boolean false main 4.90
146 condition string* unset routers 4.00
147 connect_timeout time 0s smtp 1.60
148 connection_max_messages integer 500 smtp 4.00 replaces batch_max
149 create_directory boolean true appendfile
150 create_file string "anywhere" appendfile
151 current_directory string unset transports 4.00
152 unset queryprogram 4.00
153 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
154 daemon_startup_retries int 9 main 4.52
155 daemon_startup_sleep time 30s main 4.52
156 dane_require_tls_ciphers string* unset smtp 4.91
157 data string unset redirect 4.00
158 data_timeout time 5m smtp
159 debug_print string* unset authenticators 4.00
161 unset transports 2.00
162 debug_store boolean false main 4.90
163 delay_after_cutoff boolean true smtp
164 delay_warning time list 24h main
165 delay_warning_condition string* + main 1.73
166 deliver_drop_privilege boolean false main 4.00
167 deliver_queue_load_max fixed-point unset main 1.70
168 delivery_date_add boolean false transports
169 delivery_date_remove boolean true main
170 dkim_canon string* unset smtp 4.70
171 dkim_domain string list* unset smtp 4.72
172 dkim_private_key string* unset smtp 4.70
173 dkim_selector string* unset smtp 4.70
174 dkim_sign_headers string* (RFC4871) smtp 4.70
175 dkim_strict string* unset smtp 4.70
176 dkim_timestamps integer* unset smtp 4.92
177 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
178 dkim_verify_keytypes string ed25519:rsa main 4.93
179 dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
180 dkim_verify_minimal boolean false main 4.93
181 dkim_verify_signers string* $dkim_signers main 4.70
182 directory string* unset appendfile
183 directory_file string* + appendfile
184 directory_mode octal-integer 0700 appendfile
185 directory_transport string* unset redirect 4.00
186 disable_ipv6 boolean false main 4.61
187 disable_logging boolean false routers 4.11
188 false transports 4.11
189 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
190 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
191 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
192 dns_again_means_nonexist domain list unset main 1.89
193 dns_check_names_pattern string + main 2.11
194 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
195 dns_csa_search_limit integer 5 main 4.60
196 dns_csa_use_reverse boolean true main 4.60
197 dns_dnssec_ok integer -1 main 4.82
198 dns_dane_ok integer -1 main 4.83
199 dns_ipv4_lookup boolean false main 3.20
200 dns_qualify_single boolean true smtp
201 dns_retrans time 0s main 1.60
202 dns_retry integer 0 main 1.60
203 dns_search_parents boolean false smtp
204 dns_use_edns0 integer -1 main 4.76
205 domains domain list unset routers 4.00
206 driver string unset authenticators
209 drop_cr boolean false main 4.00 became a no-op in 4.21
210 dscp string unset smtp 4.82
211 dsn_from string* + main 4.67
212 envelope_to_add boolean false transports
213 envelope_to_remove boolean true main
214 environment string* unset pipe 2.95
215 errors_copy string list* unset main
216 errors_reply_to string unset main
217 errors_to string* unset routers 4.00
218 escape_string string ">From " appendfile 3.03
220 exim_group string ++ main
221 exim_path string ++ main
222 exim_user string ++ main
223 exim_version string ++ main 4.93
224 expn boolean true routers
225 extra_local_interfaces string unset main 4.21
226 extract_addresses_remove_arguments boolean true main 1.92
227 fail_verify boolean false routers
228 fail_verify_recipient boolean false routers 4.00
229 fail_verify_sender boolean false routers 4.00
230 fallback_hosts string list unset routers 4.00
232 file string* unset appendfile
235 file_expand boolean false autoreply
236 file_format string unset appendfile 3.03
237 file_must_exist boolean false appendfile
238 file_optional boolean false autoreply
239 file_transport string* unset redirect 4.00
240 filter_prepend_home boolean true redirect 4.63
241 final_timeout time 10m smtp
242 finduser_retries integer 0 main
243 forbid_blackhole boolean false redirect 4.00
244 forbid_exim_filter boolean false redirect 4.44
245 forbid_fail boolean false redirect 4.00
246 forbid_file boolean false redirect 4.00
247 forbid_filter_existstest boolean false redirect 4.00
248 forbid_filter_logwrite boolean false redirect 4.00
249 forbid_filter_lookup boolean false redirect 4.00
250 forbid_filter_perl boolean false redirect 4.00
251 forbid_filter_readfile boolean false redirect 4.00
252 forbid_filter_readsocket boolean false redirect 4.11
253 forbid_filter_reply boolean false redirect 4.00
254 forbid_filter_run boolean false redirect 4.00
255 forbid_include boolean false redirect 4.00
256 forbid_pipe boolean false redirect 4.00
257 forbid_sieve_filter boolean false redirect 4.44
258 forbid_smtp_code boolean false redirect 4.63
259 force_command boolean false pipe 4.82
260 freeze_exec_fail boolean false pipe 1.89
261 freeze_signal boolean false pipe 4.75
262 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
263 from string* unset autoreply
264 gecos_name string* unset main
265 gecos_pattern string unset main
266 gethostbyname boolean false smtp
267 gnutls_allow_auto_pkcs11 boolean false main 4.82
268 gnutls_compat_mode boolean unset main 4.70
269 gnutls_require_kx string* unset main 4.67 deprecated, warns
270 string* unset smtp 4.67 deprecated, warns
271 gnutls_require_mac string* unset main 4.67 deprecated, warns
272 string* unset smtp 4.67 deprecated, warns
273 gnutls_require_protocols string* unset main 4.67 deprecated, warns
274 string* unset smtp 4.67 deprecated, warns
275 group string + routers 4.00
276 unset transports 4.00 replaces local option in some transports
277 header_line_maxsize integer 0 (unset) main 4.14
278 header_maxsize integer 1M main 4.14
279 headers string* unset autoreply
280 headers_add string* unset routers 4.00
282 headers_charset string ++ main 4.21
283 headers_only boolean false transports 2.05
284 headers_remove string* unset routers 4.00
286 headers_rewrite string unset transports 3.20
287 helo_accept_junk_hosts host list unset main 3.00
288 helo_allow_chars string "" main 4.02
289 helo_lookup_domains domain list unset main 4.00
290 helo_data string* "$primary_hostname" smtp 3.21
291 helo_try_verify_hosts host list unset main 4.00
292 helo_verify_hosts host list unset main 1.73
293 hide_child_in_errmsg false redirect 4.00
294 hold_domains domain list unset main 1.70
295 home_directory string* unset transports 4.00 replaces individual options
296 host_all_ignored string "defer" manualroute 4.67
297 host_find_failed string "freeze" manualroute 4.00
298 host_lookup host list unset main 3.00
299 host_lookup_order string list "bydns:byaddr" main 4.30
300 host_reject_connection host list unset main 4.00
301 hosts string unset iplookup 4.00
302 string list* unset smtp
303 hosts_avoid_esmtp host list unset smtp 4.21
304 hosts_avoid_pipelining host list unset smtp 4.67
305 hosts_avoid_tls host list unset smtp 3.20
306 hosts_connection_nolog host list unset main 4.43
307 hosts_max_try integer 5 smtp 3.20
308 hosts_max_try_hardlimit integer 50 smtp 4.50
309 hosts_nopass_tls host list unset smtp 4.00
310 hosts_noproxy_tls host list "*" smtp 4.90
311 hosts_override boolean false smtp 2.11
312 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
313 hosts_randomize boolean false manualroute 4.00
315 hosts_require_auth host list unset smtp 4.00
316 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
317 hosts_require_helo host list "*" main 4.95
318 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
319 hosts_require_tls host list unset smtp 3.20
320 hosts_treat_as_local domain list unset main 1.95
321 hosts_try_auth host list unset smtp 4.00
322 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
323 hosts_try_fastopen host list unset smtp 4.88
324 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
325 ibase_servers string unset main 4.23
326 ignore_bounce_errors_after time 0s main 4.00
327 ignore_eacces boolean false redirect 4.00
328 ignore_enotdir boolean false redirect 4.00
329 ignore_fromline_hosts host list unset main
330 ignore_fromline_local boolean false main 2.05
331 ignore_status boolean false pipe
332 ignore_target_hosts host list unset routers 4.00
333 include_directory string unset redirect 4.00
334 initgroups false routers 4.00
335 interface string list unset smtp 1.70
336 keep_malformed time 4d main
337 keepalive boolean true smtp 2.05
338 ldap_default_servers string list unset main 3.02
339 ldap_version int 2 or 3 main 4.14
340 local_from_check boolean true main 3.14
341 local_from_prefix string unset main 3.14
342 local_from_suffix string unset main 3.14
343 local_interfaces string list unset main 1.60
344 local_part_prefix string unset routers 4.00 replaces prefix
345 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
346 local_part_suffix string unset routers 4.00 replaces suffix
347 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
348 local_parts string list* unset routers 4.00
349 local_scan_timeout time 5m main 4.03
350 local_sender_retain boolean false main 4.00
351 localhost_number string unset main
352 lock_fcntl_timeout time 0s appendfile 3.14
353 lock_flock_timeout time 0s appendfile 4.11
354 lock_interval time 3s appendfile
355 lock_retries integer 10 appendfile
356 lockfile_mode octal-integer 0600 appendfile
357 lockfile_timeout time 30m appendfile
358 log string* unset autoreply
359 log_as_local boolean + routers 4.00
360 log_file_path string list ++ main
361 log_defer_output boolean false pipe 1.89
362 log_fail_output boolean false pipe 1.60
363 log_output boolean false pipe 1.60
364 log_selector string unset main 4.00
365 log_timezone boolean false main 4.11
366 lookup_open_max integer 25 main 2.05
367 mailbox_filecount string* unset appendfile 4.43
368 mailbox_size string* unset appendfile 4.43
369 maildir_format boolean false appendfile 1.70
370 maildir_retries integer 10 appendfile 1.70
371 maildir_tag string* unset appendfile 1.92
372 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
373 maildirfolder_create_regex string unset appendfile 4.62
374 mailstore_format boolean false appendfile 2.00
375 mailstore_prefix string* unset appendfile 2.00
376 mailstore_suffix string* unset appendfile 2.00
377 match_directory string* unset localuser
378 max_output integer 20K pipe
379 max_rcpt integer 100 smtp 1.60
380 max_user_name_length integer 0 main
381 mbx_format boolean false appendfile 2.10
382 message_body_newlines boolean false main 4.68
383 message_body_visible integer 500 main
384 message_id_header_domain string* unset main 4.11
385 message_id_header_text string* unset main
386 message_linelength_limit integer 998 smtp 4.94
387 message_logs boolean true main 4.10
388 message_prefix string* + appendfile 4.00 replaces prefix
389 string* unset pipe 4.00 replaces prefix
390 message_size_limit integer 50M main
392 message_suffix string* + appendfile 4.00 replaces suffix
393 string* unset pipe 4.00 replaces suffix
394 mode octal-integer 0600 appendfile
396 mode_fail_narrower boolean true appendfile 1.70
397 modemask octal-integer 022 redirect 4.00
398 more boolean true routers 4.00
399 move_frozen_messages boolean false main 3.09
400 multi_domain boolean true smtp
401 mx_domains domain list unset dnslookup 4.00
402 mx_fail_domains domain list unset dnslookup 4.43
403 mysql_servers string list unset main 3.03
404 never_users string list unset main
405 notifier_socket string "$spool_directory/exim_daemon_notify"
407 notify_comsat boolean false appendfile
408 once string* unset autoreply
409 once_file_size integer 0 autoreply 3.20
410 once_repeat time 0s autoreply 2.95
411 one_time boolean false redirect 4.00
412 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
413 optional boolean false iplookup 4.00
414 oracle_servers string unset main 4.00
415 owners string list unset redirect 4.00
416 owngroups string list unset redirect 4.00
417 pass_on_timeout boolean false routers 4.00
418 pass_router string unset routers 4.00
419 path string "/usr/bin" pipe
420 percent_hack_domains domain list unset main
421 perl_at_start boolean false main 2.10
422 perl_startup string unset main 2.10
423 permit_coredump boolean false pipe 4.73
424 pgsql_servers string list unset main 3.14
425 pid_file_path string ++ main
426 pipe_as_creator boolean false pipe
427 pipe_transport string* unset redirect 4.00
428 pipelining_advertise_hosts host list "*" main 4.14
429 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
430 port integer 0 iplookup 4.00
432 preserve_message_logs boolean false main
433 prdr_enable boolean false main 4.82 if experimental_prdr
434 primary_hostname string + main
435 print_topbitchars boolean false main 1.89
436 process_log_path string unset main 4.21
437 prod_requires_admin boolean true main 1.70
438 protocol string "udp" iplookup 4.00
439 string "smtp" smtp 3.20
440 public_name string unset authenticators 3.10
441 qualify_domain string + main
442 string* unset redirect 4.31
443 qualify_preserve_domain boolean false redirect 4.00
444 qualify_recipient string + main
445 qualify_single boolean true dnslookup 4.00
446 query string* + iplookup 4.00
447 queue_domains domain list unset main 4.00
448 queue_fast_ramp boolean false main 4.95
449 queue_list_requires_admin boolean true main 1.95
450 queue_only boolean false main
451 queue_only_file string unset main 2.05
452 queue_only_load fixed-point unset main
453 queue_only_load_latch boolean true main 4.68
454 queue_only_override boolean true main 4.21
455 queue_run_in_order boolean false main 1.70
456 queue_run_max integer 5 main
457 queue_smtp_domains domain list unset main
458 quota string* unset appendfile 1.60
459 quota_directory string* unset appendfile 4.11
460 quota_filecount integer 0 appendfile 2.05
461 quota_is_inclusive boolean true appendfile 3.20
462 quota_size_regex string unset appendfile 3.14
463 quota_warn_message string* + appendfile 2.10
464 quota_warn_threshold string* 0 appendfile 2.10
465 rcpt_include_affixes boolean false transports 4.21
466 receive_timeout time 0s main 4.00 replacing accept_timeout
467 received_header_text string* + main
468 received_headers_max integer 30 main
469 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
470 recipients_max integer 50000 main 1.60 default changed in 4.95 (was 0)
471 recipients_max_reject boolean false main 1.70
472 redirect_router string unset routers 4.00
473 remote_max_parallel integer 1 main
474 remote_sort_domains domain list unset main 4.00 replacing remote_sort
475 repeat_use boolean true redirect 4.00
476 reply_to string* unset autoreply 2.05
477 reply_transport string* unset redirect 4.00
478 require_files string list* unset routers 4.00
479 reroute string* unset iplookup 4.00
480 response_pattern string unset iplookup 4.00
481 restrict_to_path boolean false pipe
482 retry_data_expire time 7d main 3.03
483 retry_include_ip_address boolean true smtp 1.92
484 retry_interval_max time 24h main
485 retry_use_local_part boolean + routers 4.00
486 + transports 4.00 replacing individual options
487 return_fail_output boolean false pipe 1.60
488 return_message boolean false autoreply
489 return_output boolean false pipe
490 return_path string* unset transports 2.05
491 return_path_add boolean false transports
492 return_path_remove boolean true main
493 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
494 rewrite boolean true redirect 4.00
495 rewrite_headers boolean true dnslookup 4.00
496 rfc1413_hosts host list * main
497 rfc1413_query_timeout time 5s main
498 router_home_directory string* unset routers 4.11
499 route_data string* unset manualroute 4.00
500 route_list string list unset manualroute 4.00
501 same_domain_copy_routing boolean false dnslookup 4.00
502 search_parents boolean false dnslookup 4.00
503 self string "freeze" routers 4.00
504 sender_unqualified_hosts host list unset main
505 senders address list unset routers 4.00
506 serialize_hosts host list unset smtp 1.60
507 server_advertise_condition string* unset authenticators 4.14
508 server_channelbinding bool false gsasl 4.80
509 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
510 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
511 server_keytab string* unset heimdal_gssapi 4.80
512 server_mail_auth_condition string* unset authenticators 3.22
513 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
514 server_password string unset gsasl 4.80
515 server_param1 string* unset tls (auth) 4.86
516 server_param2 string* unset tls (auth) 4.86
517 server_param3 string* unset tls (auth) 4.86
518 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
519 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
520 server_prompts string* unset plaintext 3.10
521 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
522 server_scram_iter string* unset gsasl 4.80
523 server_scram_salt string* unset gsasl 4.80
524 server_secret string* unset cram_md5 3.10
525 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
526 server_set_id string* unset authenticators 3.10
527 set string* unset routers 4.93
528 shadow_condition string* unset transports
529 shadow_transport string unset transports
530 size_addition integer 1024 smtp 1.91
531 skip_syntax_errors boolean false redirect 4.00
532 smtp_accept_keepalive boolean true main
533 smtp_accept_max integer 20 main
534 smtp_accept_max_nonmail integer 10 main 4.11
535 smtp_accept_max_nonmail_hosts host list * main 4.14
536 smtp_accept_max_per_connection integer 1000 main 4.00
537 smtp_accept_max_per_host integer 0 main 2.05
538 smtp_accept_queue integer 0 main
539 smtp_accept_queue_per_connection integer 10 main 2.03
540 smtp_accept_reserve integer 0 main
541 smtp_active_hostname string* unset main 4.33
542 smtp_backlog_monitor integer 0 main 4.95
543 smtp_banner string* + main
544 smtp_check_spool_space boolean true main 2.10
545 smtp_connect_backlog integer 5 main
546 smtp_enforce_sync boolean true main 4.00
547 smtp_etrn_command string* unset main 1.92
548 smtp_etrn_serialize boolean true main 1.89
549 smtp_load_reserve fixed-point unset main
550 smtp_max_synprot_errors integer 3 main 4.30
551 smtp_max_unknown_commands integer 3 main 4.14
552 smtp_ratelimit_hosts host list unset main 4.00
553 smtp_ratelimit_mail string unset main 4.00
554 smtp_ratelimit_rcpt string unset main 4.00
555 smtp_receive_timeout time 5m main
556 smtp_reserve_hosts host list unset main
557 smtp_return_error_details boolean false main 4.11
558 socket string* unset lmtp 4.11
559 spamd_address string* + main 4.50 with content scan
560 spf_guess string "v=spf1 a/24 mx/24 ptr ?all"
561 main 4.91 with SUPPORT_SPF
562 spf_smtp_comment_template string* "Please see http://www.open-spf.org/Why"
563 main 4.94 with SUPPORT_SPF
564 split_spool_directory boolean false main 1.70
565 spool_directory string ++ main
566 spool_wireformat boolean false main 4.90
567 sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
568 sqlite_lock_timeout time 5s main 4.53
569 strict_acl_vars boolean false main 4.64
570 srv_fail_domains domain list unset dnslookup 4.43
571 strip_excess_angle_brackets boolean false main
572 strip_trailing_dot boolean false main
573 subject string* unset autoreply
574 syntax_errors_text string* unset redirect 4.00
575 syntax_errors_to string unset redirect 4.00
576 syslog_duplication boolean true main 4.21
577 syslog_facility string unset main 4.20
578 syslog_processname string "exim" main 4.20
579 syslog_timestamp boolean true main 4.00
580 system_filter string unset main 4.00 replacing message_filter
581 system_filter_directory_transport string unset main 4.00 replacing message_filter
582 system_filter_file_transport string unset main 4.00 replacing message_filter
583 system_filter_group string unset main 4.00 replacing message_filter
584 system_filter_pipe_transport string unset main 4.00 replacing message_filter
585 system_filter_reply_transport string unset main 4.00 replacing message_filter
586 system_filter_user string unset main 4.00 replacing message_filter
587 tcp_nodelay boolean true main 4.23
589 tcp_wrappers_daemon_name string* ++ main 4.73
590 temp_errors string list + pipe 1.95
591 text string* unset autoreply
592 timeout time 5m lmtp 3.20
596 timeout_defer boolean false pipe 4.51
597 timeout_frozen_after time 0s main 3.20
598 timezone string + main 3.15
599 tls_advertise_hosts host list * main 3.20
600 tls_advertise_requiretls host list * main 4.92 if experimental_requiretls
601 tls_certificate string* unset main 3.20
603 tls_dh_max_bits integer 2236 main 4.80
604 tls_dh_min_bits integer 1024 smtp 4.82
605 tls_dhparam string* unset main 3.20
606 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
607 tls_on_connect_ports string unset main 4.43
608 tls_privatekey string* unset main 3.20
610 tls_remember_emstp boolean false main 4.21
611 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
612 string* unset main 4.33
613 tls_resumption_hosts host list* unset main 4.95
614 host list* unset smtp 4.95
615 tls_sni string* unset main 4.80
616 tls_tempfail_tryclear boolean true smtp 4.05
617 tls_try_verify_hosts host list unset main 4.00
618 tls_verify_certificates string* unset main 3.20
620 tls_verify_hosts host list unset main 3.20
621 to string* unset autoreply
622 translate_ip_address string unset routers 4.00
623 transport string* unset routers 4.00
624 transport_current_directory string unset routers 4.00
625 transport_home_directory string unset routers 4.00
626 transport_filter string unset transports
627 transport_filter_timeout time 5m transports 4.30
628 trusted_groups string list unset main
629 trusted_users string list unset main
630 umask octal-integer 022 pipe
631 unknown_login string unset main
632 unknown_username string unset main
633 unseen boolean false routers 4.00
634 untrusted_set_sender boolean false main 3.20
635 use_bsmtp boolean false appendfile 4.00
637 use_crlf boolean false appendfile 1.89
639 use_fcntl_lock boolean + appendfile 1.70
640 use_flock_lock boolean + appendfile 4.11
641 use_lockfile boolean + appendfile
642 use_mbx_lock boolean + appendfile 2.10
643 use_shell boolean false pipe 1.70
644 user string + routers 4.00
645 unset transports 4.00 replaces individual options
646 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
647 uucp_from_pattern string + main 1.75
648 uucp_from_sender string* "$1" main 1.75
649 verify boolean true routers 4.00
650 verify_only boolean false routers 4.00
651 verify_recipient boolean true routers 4.00
652 verify_sender boolean true routers 4.00
653 warn_message_file string* unset main 4.00 expanded from 4.94
654 widen_domains string list unset dnslookup 4.00
655 write_rejectlog boolean true main 4.31
659 2. COMMAND LINE OPTIONS
660 -----------------------
662 The table below contains a complete list of all Exim's command line options.
663 Those marked with # are available only to trusted users, those marked with +
664 are available only to admin users, and those marked with * exist only to
665 provide compatibility with Sendmail.
668 --help Give a little help (not a lot)
669 --version Give version information (alias for -bV)
672 -bdf + Start daemon and run it in the foreground
673 -be Test string expansion
674 -bem Test string expansion, read test message first
675 -bF Test system filter file
676 -bf Test user filter file
677 -bfd Set domain for filter testing
678 -bfl Set local part for filter testing
679 -bfp Set local part prefix for filter testing
680 -bfs Set local part suffix for filter testing
681 -bh Test incoming SMTP call, omitting callouts
682 -bhc Test incoming SMTP call, with callouts
683 -bi * Run <command>bi_command</command>
684 -bI:help Show list of accepted -bI:<tag> options
685 -bm Accept message on standard input
686 -bmalware + Invoke configured malware scanning against supplied filename
687 -bnq Don't qualify addresses in locally submitted messages
688 -bP Show configuration option settings
690 -bpa + ... with generated addresses as well
691 -bpc + ... but just show a count of messages
692 -bpr + ... do not sort
693 -bpra + ... with generated addresses, unsorted
694 -bpru + ... only undelivered addresses, unsorted
695 -bpu + ... only undelivered addresses
696 -brt Test retry rules
697 -brw Test rewriting rules
698 -bS Read batch SMTP on standard input
699 -bs Run SMTP on standard input and output
700 -bt Test address directing and routing
701 -bV Verify version number
702 -bv Test recipient address verification
703 -bvs Test sender address verification
704 -bw + Inetd wait mode
705 -C + Use alternate configuration file
706 -D + Define macro for configuration file
707 -d + Turn on debugging output
708 -dd + Ditto, but if a daemon, not for subprocesses
709 -dropcr Remove CR character in input: became a no-op in 4.21
711 -ex * Synonym for -oex (for several different x)
712 -F Set calling user name
713 -f # Set calling user address
716 -i Dot does not terminate message
717 -M + Force deliver specific message
718 -Mar + Add recipient to message
719 -MC Internal use only
720 -MCA Internal use only
721 -MCP Internal use only
722 -MCQ Internal use only
723 -MCS Internal use only
724 -MCT Internal use only
725 -Mc + Deliver specific message
726 -Mes + Edit message sender
727 -Mf + Freeze message(s)
728 -Mg + Give up (bounce) message(s)
729 -Mmad + Mark all recipients delivered
730 -Mmd + Mark one recipient delivered
731 -Mrm + Remove message(s) (no bounce)
732 -Mset + Load message's variables when testing with -be
733 -Mt + Thaw message(s)
734 -Mvb + View message body
735 -Mvc + View entire message in RFC 2822 format
736 -Mvh + View message header
737 -Mvl + View message log
739 -N + Deliver without transporting
742 -oA * Supply argument for <option>-bi</option>
743 -oB Set max messages down one connection
744 -odb Background delivery
745 -odf Foreground delivery
746 -odi Foreground delivery
747 -odq Queue message; do not deliver
748 -odqs ... do not do SMTP deliveries
749 -oee Error sent by mail; zero return code
750 -oem Error sent by mail; non-zero return code
751 -oep Error written to standard error stream
752 -oeq * Error written to standard error stream
753 -oew * Error sent by mail; non-zero return code
754 -oi Dot does not terminate message
755 -oitrue * Dot does not terminate message
756 -oMa # Supply host address
757 -oMaa # Supply authenticator name
758 -oMai # Supply authenticated id
759 -oMas # Supply authenticated sender
760 -oMi # Supply interface address
761 -oMm # Supply message reference
762 -oMr # Supply protocol name
763 -oMs # Supply host name
764 -oMt # Supply ident string
767 -oP * Specify path for daemon's pid file
768 -or Timeout non-SMTP messages
769 -os Timeout for SMTP messages
770 -ov * Verbose; same as -v
771 -oX Alternative port for daemon
772 -pd Delay Perl interpreter start
773 -ps Do not delay Perl interpreter start
774 -p<r>:<s> * Same as -oMr <r> -oMs <s>
776 -qf + ... force delivery ) Other combinations are
777 -qff + ... and include frozen messages ) possible. The syntax is
778 -qi + ... initial deliveries only )
779 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
780 -qq + Two-stage queue run )
783 -R Select by recipient in queue run
785 -Rff ... and frozen messages
786 -Rr ... using regular expression
787 -Rrf ... with forcing
788 -Rrff ... and frozen messages
790 -S Select by sender in queue run
792 -Sff ... and frozen messages
793 -Sr ... using regular expression
794 -Srf ... with forcing
795 -Srff ... and frozen messages
796 -Tqt * Used by Exim test suite; not recognized in normal use
797 -t Take recipients from header lines
799 -tls-on-connect Do TLS on startup (for legacy clients)
801 -v Verbose - shows SMTP dialogue and other delivery info
802 -x Ignored (AIX compatibility)
805 3. BUILD TIME OPTIONS FOR EXIM
806 ------------------------------
808 The table below contains a "mostly" complete list of options that can be
809 set in Local/Makefile when building Exim. The only items not included are
810 those whose names can be trivially derived from rules stated below.
812 More information about individual options can be found in src/EDITME and
815 The second column below gives the type of option:
817 . `system' means the option is concerned with the operating system;
819 . `driver' means the option selects a driver to be included in the binary;
821 . `lookup' means the option selects a lookuptype to be included in the binary;
823 . `mandatory' means the option is required to be supplied;
825 . `recommended' means the option is recommended to be supplied;
827 . `optional' means what it says;
829 Those marked with * are specialized and are unlikely to be required in most
830 installations. Those that are marked with ** are commonly set in OS-specific
831 Makefiles. If you use any of these in your Local/Makefile, you may need to
832 reproduce some of the OS-specific settings. For example, in the Makefile for
833 Solaris (which is actually called OS/Makefile-SunOS5), there is
835 LIBS=-lsocket -lnsl -lkstat
837 If you use LIBS to add extra libraries, you must also include the OS ones in
838 your setting. It is better, in this particular case, to use EXTRALIBS, which is
839 empty by default, and is provided for just this reason. Of course, if you do
840 actually want to modify a setting from the OS-specific file, there is nothing
841 to stop you overriding it in your Local/Makefile.
843 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
844 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
845 libraries specific only to that module. These rules are only used where the
846 relevant lookup is a module. These options are not explicitly listed below.
848 Variables with names endined `_PC' are used for pkg-config integration; setting
849 the value to the name of a pkg-config package will cause Exim's build system to
850 query the --cflags and --libs for the given name, when building anything
851 dependent upon the component associated with the `_PC' variable. For lookups,
852 if the lookup is dynamically loaded, then this *replaces* the use of the
853 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
854 is statically loaded into Exim, the results will be inserted into the
855 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
856 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
857 only listed below for the TLS implementation cases.
860 Option Type Description
861 ------------------------------------------------------------------------------
863 ALT_CONFIG_PREFIX optional restricts location of -C files
864 APPENDFILE_MODE optional*
865 APPENDFILE_DIRECTORY_MODE optional*
866 APPENDFILE_LOCKFILE_MODE optional*
867 AR system command to build a library
868 AUTH_CRAM_MD5 driver include cram_md5 authenticator
869 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
870 AUTH_GSASL driver include GNU SASL authenticator
871 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
872 AUTH_LIBS system library linkage for authenticators
873 AUTH_PLAINTEXT driver include plaintext authenticator
874 AUTH_SPA driver include SPA (NTLM) authenticator
875 AUTH_VARS=3 optional* number of $auth variables
876 BASENAME_COMMAND system** path to basename
877 BASE_62=62 optional* not normally changed for Unix
878 BIN_DIRECTORY mandatory Exim binary directory
879 CC system** C compiler
880 CFLAGS system** flags for C compiler
881 CFLAGS_DYNAMIC system** extra flags needed for .so modules
882 CHGRP_COMMAND system** path to chgrp
883 CHOWN_COMMAND system** path to chown
884 COMPRESS_COMMAND system path to a compress command
885 COMPRESS_SUFFIX system suffix added to compressed files
886 CONFIGURE_FILE mandatory Exim runtime configuration file
887 CONFIGURE_FILE_USE_EUID optional*
888 CONFIGURE_FILE_USE_NODE optional*
889 CONFIGURE_GROUP optional* alternate group for configuration file
890 CONFIGURE_OWNER optional* alternate owner for configuration file
891 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
892 DBMLIB optional** location of DBM library
893 DB_DIRECTORY_MODE optional* mode for hints directory
894 DB_LOCKFILE_MODE optional* mode for hints lock files
895 DB_LOCK_TIMEOUT optional* timeout for hints lock files
896 DB_MODE optional* mode for hints files
897 DEFAULT_CRYPT optional default crypt() function
898 DELIVER_IN_BUFFER_SIZE optional*
899 DELIVER_OUT_BUFFER_SIZE optional*
900 DISABLE_DKIM optional disables DKIM support
901 DISABLE_DNSSEC optional disables attempts to use DNSSEC
902 DISABLE_D_OPTION optional disables -D option
903 ERRNO_QUOTA optional* error code for system quota failures
904 EXICYCLOG_MAX optional number of old log files to keep
905 EXIMDB_DIRECTORY_MODE optional* for hints database directory
906 EXIMDB_LOCKFILE_MODE optional* for hints lock files
907 EXIMDB_MODE optional* mode for hints files
908 EXIMON_TEXTPOP system**
910 EXIM_GROUP mandatory group to use for Exim
911 EXIM_MONITOR optional set to eximon.bin to compile
913 EXIM_USER mandatory user to use for Exim
914 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
915 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
916 EXIWHAT_MULTIKILL_CMD system**
917 EXIWHAT_MULTIKILL_ARG system**
918 EXIWHAT_PS_ARG system** to list all processes
919 EXIWHAT_PS_CMD system** path to ps command
920 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
921 EXTRALIBS system additional libraries
922 EXTRALIBS_EXIM system additional libraries for Exim only
923 EXTRALIBS_EXIMON system additional libraries for the monitor
924 FIXED_NEVER_USERS optional can't override at runtime
925 HAVE_ICONV system the iconv() function is available
926 HAVE_IPV6 system include IPv6 support
927 HEADERS_CHARSET optional charset for decoded header lines
928 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
929 HEADER_MAXSIZE optional* max memory for message header
930 HOSTNAME_COMMAND system** path to hostname command
931 INCLUDE system path to include files
932 INFO_DIRECTORY optional directory for Info documentation
933 INPUT_DIRECTORY_MODE optional mode for input directory
934 IPV6_INCLUDE system additional includes for IPv6
935 IPV6_LIBS system additional libraries for IPv6
936 LDAP_LIB_TYPE optional type of LDAP library
937 LFLAGS system** link editor flags
938 LIBIDENTCFLAGS system C flags when compiling libident
939 LIBIDENTNAME system name for libident library
940 LIBRESOLV system** library for DNS resolver
941 LIBS system** additional libraries
942 LIBS_EXIM system** additional libraries for Exim ony
943 LIBS_EXIMON system** additional libraries for monitor
944 LOCAL_SCAN_SOURCE optional location of local_scan() source
945 LOG_DIRECTORY_MODE optional mode for log directory
946 LOG_FILE_PATH optional path to log files
947 LOG_MODE optional mode for log files
948 LOOKUP_CDB lookup include cdb lookup
949 LOOKUP_DBM lookup include dbm lookup
950 LOOKUP_DNSDB lookup include dnsdb lookup
951 LOOKUP_DSEARCH lookup include dsearch lookup
952 LOOKUP_INCLUDE lookup include files for lookups
953 LOOKUP_LDAP lookup include ldap lookup
954 LOOKUP_LIBS lookup include libraries for lookups
955 LOOKUP_LSEARCH lookup include all lsearch lookups
956 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
957 LOOKUP_MYSQL lookup include mysql lookup
958 LOOKUP_NIS lookup include nis lookup
959 LOOKUP_NISPLUS lookup include nisplus lookup
960 LOOKUP_ORACLE lookup include oracle lookup
961 LOOKUP_PGSQL lookup include pgsql lookup
962 LOOKUP_TESTDB lookup*
963 LOOKUP_WHOSON lookup include whoson lookup
964 LOOKUP_*_INCLUDE optional* include files for dynamic module
965 LOOKUP_*_LIBS optional* libraries for dynamic module
966 MAKE_SHELL optional* shell to use for make
967 MAX_FILTER_SIZE optional* max file size for filter files
968 MAX_INCLUDE_SIZE optional* max file size for :include: files
969 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
970 MAX_NAMED_LIST optional* max named lists of a given type
971 MAX_INTERFACES system maximum network interfaces
972 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
973 MV_COMMAND system path to mv command
974 NO_SYMLINK optional install doesn't make 'exim" symlink
975 PCRE_CONFIG system* use pcre-config for PCRE support
976 PCRE_LIBS system* library for using PCRE
977 PERL_CC system* compiler for Perl interface code
978 PERL_CCOPTS system* flags for same
979 PERL_COMMAND system path to Perl
980 PERL_LIBS system* library for compiling Perl interface
981 PID_FILE_PATH optional path to daemon's pid file
982 RADIUS_CONFIG_FILE optional path to Radius config file
983 RADIUS_LIB_TYPE optional type of RADIUS library
984 RANLIB system** path to ranlib command
985 RM_COMMAND system path to rm command
986 ROUTER_ACCEPT driver include accept router
987 ROUTER_DNSLOOKUP driver include dnslookup router
988 ROUTER_MANUALROUTE driver include manualroute router
989 ROUTER_IPLITERAL driver include ipliteral router
990 ROUTER_IPLOOKUP driver include iplookup router
991 ROUTER_REDIRECT driver include redirect router
992 ROUTER_QUERYPROGRAM driver include queryprogram router
993 SPOOL_DIRECTORY recommended path to spool directory
994 SPOOL_DIRECTORY_MODE optional mode of spool directory
995 SPOOL_MODE optional mode of spool files
996 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
997 STRIP_COMMAND optional* can be used to strp binaries
998 SUPPORT_A6 optional* support A6 DNS records
999 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
1000 SUPPORT_MAILDIR optional support for maildir delivery
1001 SUPPORT_MAILSTORE optional support for mailstore delivery
1002 SUPPORT_MBX optional support for MBX delivery
1003 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
1004 SUPPORT_PAM optional support for PAM authentication
1005 SUPPORT_TLS optional support for TLS encryption over SMTP
1006 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
1007 SYSLOG_LOG_PID optional add pid to syslog lines
1008 SYSLOG_LONG_LINES optional do not split long syslog lines
1009 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
1010 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
1011 TIMEZONE_DEFAULT optional default for timezone option
1012 TLS_INCLUDE optional path to include files for TLS
1013 TLS_LIBS optional additional libraries for TLS
1014 EXIM_TMPDIR system value for TMPDIR environment variable
1015 TRANSPORT_APPENDFILE driver include appendfile transport
1016 TRANSPORT_AUTOREPLY driver include autoreply transport
1017 TRANSPORT_LMTP driver include lmtp transport
1018 TRANSPORT_PIPE driver include pipe transport
1019 TRANSPORT_SMTP driver include smtp transport
1020 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1021 USE_DB system** use native DB interface
1022 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1023 USE_GNUTLS_PC optional probably "gnutls"
1024 USE_OPENSSL_PC optional probably "openssl"
1025 USE_READLINE optional try to load libreadline for -be
1026 USE_TCP_WRAPPERS system link with tcpwrappers
1027 USE_TDB optional use the tdb DB interface
1028 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1029 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1030 X11 system** X11 base directory
1031 X11_LD_LIB system** X11 link library
1032 XINCLUDE system** X11 include directory
1033 XLFLAGS system** X11 link time flags
1034 ZCAT_COMMAND system path to zcat command
1037 4. BUILD TIME OPTIONS FOR EXIMON
1038 --------------------------------
1040 The table below contains a complete list of options that can be set in
1041 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1042 ** it means that the text string is too long to fit in the table and is instead
1043 given below. A blank default means that there is no default value.
1045 ACTION_OUTPUT=no show output for every action
1046 ACTION_QUEUE_UPDATE=yes update queue display after actions
1047 BODY_MAX=20000 maximum body display
1048 DOMAIN= domain to strip from window title
1049 LOG_BUFFER=20K buffer for log tail
1050 LOG_DEPTH=300 depth of log subwindow
1051 LOG_FONT=** font for log display
1052 LOG_STRIPCHARTS=** patterns for stripcharts
1053 LOG_WIDTH=950 width of log subwindow
1054 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1055 MIN_HEIGHT=162 minimum window height
1056 MIN_WIDTH=103 minimum window width
1057 QUALIFY_DOMAIN= local domain to strip from addresses
1058 QUEUE_DEPTH=200 depth of queue subwindow
1059 QUEUE_FONT=$LOG_FONT font for queue display
1060 QUEUE_INTERVAL=300 queue refresh interval
1061 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1062 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1063 QUEUE_WIDTH=950 width of queue subwindow
1064 SIZE_STRIPCHART= request partition size stripchart
1065 SIZE_STRIPCHART_NAME=space name for size stripchart
1066 START_SMALL=no if yes, start with small window
1067 STRIPCHART_INTERVAL=60 stripchart refresh interval
1068 TEXT_DEPTH=200 depth of text windows
1069 WINDOW_TITLE="${hostname} eximon" window title
1071 The default for LOG_FONT is
1073 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1075 and the default for LOG_STRIPCHARTS is
1077 LOG_STRIPCHARTS='/ <= /in/
1079 / => .+ R=local/local/
1080 / => .+ T=[^ ]*smtp/smtp/'
1082 That is, there are four stripcharts, named in, out, local, and smtp. The first
1083 counts message arrivals, the second counts all deliveries, the third counts
1084 deliveries where the router's name starts with "local", and the fourth counts
1085 deliveries where the transport name contains "smtp".
1087 **** End of OptionLists ****
git://git.exim.org / exim.git / blob