1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.83 2005/02/17 10:04:40 ph10 Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
7 A note about Exim versions 4.44 and 4.50
8 ----------------------------------------
10 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
11 changes of various kinds. As a consequence, a big documentation update was
12 needed. This delayed the release for rather longer than seemed good, especially
13 in the light of a couple of (minor) security issues. Therefore, the changes
14 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
15 release. So 4.44 and 4.50 are in effect two different branches that both start
18 I have left the 4.50 change log unchanged; it contains all the changes since
19 4.43. The change log for 4.44 is below; many of its items are identical to
20 those for 4.50. This seems to be the most sensible way to preserve the
21 historical information.
27 1. Minor wording change to the doc/README.SIEVE file.
29 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
30 computation of the current number of files was incorrect.
32 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
33 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
36 4. Give more explanation in the error message when the command for a transport
37 filter fails to execute.
39 5. There are several places where Exim runs a non-Exim command in a
40 subprocess. The SIGUSR1 signal should be disabled for these processes. This
41 was being done only for the command run by the queryprogram router. It is
42 now done for all such subprocesses. The other cases are: ${run, transport
43 filters, and the commands run by the lmtp and pipe transports.
45 6. Added CONFIGURE_GROUP build-time option.
47 7. Some older OS have a limit of 256 on the maximum number of file
48 descriptors. Exim was using setrlimit() to set 1000 as a large value
49 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
50 systems. I've change it so that if it can't get 1000, it tries for 256.
52 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
53 was an oversight, and furthermore, ever since the addition of extra
54 controls (e.g. 4.43/32), the checks on when to allow different forms of
55 "control" were broken. There should now be diagnostics for all cases when a
56 control that does not make sense is encountered.
58 9. Added the /retain_sender option to "control=submission".
60 10. $recipients is now available in the predata ACL (oversight).
62 11. Tidy the search cache before the fork to do a delivery from a message
63 received from the command line. Otherwise the child will trigger a lookup
64 failure and thereby defer the delivery if it tries to use (for example) a
65 cached ldap connection that the parent has called unbind on.
67 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
68 of $address_data from the recipient verification was clobbered by the
71 13. The value of address_data from a sender verification is now available in
72 $sender_address_data in subsequent conditions in the ACL statement.
74 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
76 15. Added a new option "connect=<time>" to callout options, to set a different
79 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
80 was its contents. (It was OK if the option was not defined at all.)
82 17. A "Completed" log line is now written for messages that are removed from
83 the spool by the -Mrm option.
85 18. New variables $sender_verify_failure and $recipient_verify_failure contain
86 information about exactly what failed.
88 19. Added -dd to debug only the daemon process.
90 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
91 handles timeouts, both on the server side and network timeouts. Renamed the
92 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
94 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
95 It is now set to "smtps".
97 22. $host_address is now set to the target address during the checking of
100 23. When checking ignore_target_hosts for an ipliteral router, no host name was
101 being passed; this would have caused $sender_host_name to have been used if
102 matching the list had actually called for a host name (not very likely,
103 since this list is usually IP addresses). A host name is now passed as
106 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
107 code that specifies a non-restarting handler (typically sigaction() in
108 modern systems) in an attempt to fix a rare and obscure crash bug.
110 25. Narrowed the window for a race in the daemon that could cause it to ignore
111 SIGCHLD signals. This is not a major problem, because they are used only to
112 wake it up if nothing else does.
114 26. A malformed maildirsize file could cause Exim to calculate negative values
115 for the mailbox size or file count. Odd effects could occur as a result.
116 The maildirsize information is now recalculated if the size or filecount
119 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
120 support for a long time. Removed HAVE_SYS_VFS_H.
122 28. Installed the latest version of exipick from John Jetmore.
124 29. In an address list, if the pattern was not a regular expression, an empty
125 subject address (from a bounce message) matched only if the pattern was an
126 empty string. Non-empty patterns were not even tested. This was the wrong
127 because it is perfectly reasonable to use an empty address as part of a
128 database query. An empty address is now tested by patterns that are
129 lookups. However, all the other forms of pattern expect the subject to
130 contain a local part and a domain, and therefore, for them, an empty
131 address still always fails if the pattern is not itself empty.
133 30. Exim went into a mad DNS loop when attempting to do a callout where the
134 host was specified on an smtp transport, and looking it up yielded more
137 31. Re-factored the code for checking spool and log partition space into a
138 function that finds that data and another that does the check. The former
139 is then used to implement four new variables: $spool_space, $log_space,
140 $spool_inodes, and $log_inodes.
142 32. The RFC2047 encoding function was originally intended for short strings
143 such as real names; it was not keeping to the 75-character limit for
144 encoded words that the RFC imposes. It now respects the limit, and
145 generates multiple encoded words if necessary. To be on the safe side, I
146 have increased the buffer size for the ${rfc2047: expansion operator from
149 33. It is now permitted to omit both strings after an "if" condition; if the
150 condition is true, the result is "true". As before, when the second string
151 is omitted, a false condition yields an empty string. This makes it less
152 cumbersome to write custom ACL and router conditions.
154 34. Failure to deliver a bounce message always caused it to be frozen, even if
155 there was an errors_to setting on the router. The errors_to setting is now
158 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
159 canonical form (fully expanded) before being placed in
160 $sender_host_address.
162 36. The table in the code that translates DNS record types into text (T_A to
163 "A" for instance) was missing entries for NS and CNAME. It is just possible
164 that this could have caused confusion if both these types were looked up
165 for the same domain, because the text type is used as part of Exim's
166 per-process caching. But the chance of anyone hitting this buglet seems
169 37. The dnsdb lookup has been extended in a number of ways.
171 (1) There is a new type, "zns", which walks up the domain tree until it
172 finds some nameserver records. It should be used with care.
174 (2) There is a new type, "mxh", which is like "mx" except that it returns
175 just the host names, not the priorities.
177 (3) It is now possible to give a list of domains (or IP addresses) to be
178 looked up. The behaviour when one of the lookups defers can be
179 controlled by a keyword.
181 (4) It is now possible to specify the separator character for use when
182 multiple records are returned.
184 38. The dnslists ACL condition has been extended: it is now possible to supply
185 a list of IP addresses and/or domains to be looked up in a particular DNS
188 39. Added log_selector=+queue_time_overall.
190 40. When running the queue in the test harness, wait just a tad after forking a
191 delivery process, to get repeatability of debugging output.
193 41. Include certificate and key file names in error message when GnuTLS fails
194 to set them up, because the GnuTLS error message doesn't include the name
195 of the failing file when there is a problem reading it.
197 42. Allow both -bf and -bF in the same test run.
199 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
201 44. The "Exiscan patch" is now merged into the mainline Exim source.
203 45. Sometimes the final signoff response after QUIT could fail to get
204 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
205 < 0 before doing a fflush(). This bug looks as though it goes back to the
206 introduction of TLS in release 3.20, but "sometimes" must have been rare
207 because the tests only now provoked it.
209 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
210 (this can affect the format of dates).
212 47. exim_tidydb, when checking for the continued existence of a message for
213 which it has found a message-specific retry record, was not finding
214 messages that were in split spool directories. Consequently, it was
215 deleting retry records that should have stayed in existence.
217 48. Steve fixed some bugs in eximstats.
219 49. The SPA authentication driver was not abandoning authentication and moving
220 on to the next authenticator when an expansion was forced to fail,
221 contradicting the general specification for all authenticators. Instead it
222 was generating a temporary error. It now behaves as specified.
224 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
225 (the order specifies the preference for clients). The order is now AES256,
226 AES128, 3DES, ARCFOUR128.
228 51. Small patch to Sieve code - explicitly set From: when generating an
231 52. Exim crashed if a remote delivery caused a very long error message to be
232 recorded - for instance if somebody sent an entire SpamAssassin report back
233 as a large number of 550 error lines. This bug was coincidentally fixed by
234 increasing the size of one of Exim's internal buffers (big_buffer) that
235 happened as part of the Exiscan merge. However, to be on the safe side, I
236 have made the code more robust (and fixed the comments that describe what
239 53. Now that there can be additional text after "Completed" in log lines (if
240 the queue_time_overall log selector is set), a one-byte patch to exigrep
241 was needed to allow it to recognize "Completed" as not the last thing in
244 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
245 patch that reportedly fixes this has been added. I am not expert enough to
246 create a test for it. This is what the patch creator wrote:
248 "I found a little strange behaviour of ldap code when working with
249 Windows 2003 AD Domain, where users was placed in more than one
250 Organization Units. When I tried to give exim partial DN, the exit code
251 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
252 But simultaneously result of request was absolutely normal ldap result,
253 so I produce this patch..."
255 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
256 REFERENCE, so I have modified the code to exclude the patch when that macro
259 55. Some experimental protocols are using DNS PTR records for new purposes. The
260 keys for these records are domain names, not reversed IP addresses. The
261 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
262 leaves it alone. Component reversal etc. now happens only for IP addresses.
265 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
267 57. Double the size of the debug message buffer (to 2048) so that more of very
268 long debug lines gets shown.
270 58. The exicyclog utility now does better if the number of log files to keep
271 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
273 59. Two changes related to the smtp_active_hostname option:
275 (1) $smtp_active_hostname is now available as a variable.
276 (2) The default for smtp_banner uses $smtp_active_hostname instead
277 of $primary_hostname.
279 60. The host_aton() function is supposed to be passed a string that is known
280 to be a valid IP address. However, in the case of IPv6 addresses, it was
281 not checking this. This is a hostage to fortune. Exim now panics and dies
282 if the condition is not met. A case was found where this could be provoked
283 from a dnsdb PTR lookup with an IPv6 address that had more than 8
284 components; fortuitously, this particular loophole had already been fixed
285 by change 4.50/55 above.
287 If there are any other similar loopholes, the new check in host_aton()
288 itself should stop them being exploited. The report I received stated that
289 data on the command line could provoke the exploit when Exim was running as
290 exim, but did not say which command line option was involved. All I could
291 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
295 61. There was a buffer overflow vulnerability in the SPA authentication code
296 (which came originally from the Samba project). I have added a test to the
297 spa_base64_to_bits() function which I hope fixes it.
300 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
301 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
303 63. The daemon start-up calls getloadavg() while still root for those OS that
304 need the first call to be done as root, but it missed one case: when
305 deliver_queue_load_max is set with deliver_drop_privilege. This is
306 necessary for the benefit of the queue runner, because there is no re-exec
307 when deliver_drop_privilege is set.
309 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
312 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
313 was in use, was not putting the data itself into the right store pool;
314 consequently, it could be overwritten for a subsequent message in the same
315 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
318 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
320 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
321 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
322 the function were treating the return as a boolean value, which happened to
323 work because 0=false and not-0=true, but is not correct code.
325 68. The host_aton() function was not handling scoped IPv6 addresses (those
326 with, for example, "%eth0" on the end) correctly.
328 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
329 negated items (that is, ~something) in unsigned ints. Some compilers
330 apparently mutter when there is no cast.
332 70. If an address verification called from an ACL failed, and did not produce a
333 user-specific message (i.e. there was only a "system" message), nothing was
334 put in $acl_verify_message. In this situation, it now puts the system
337 71. Change 4.23/11 added synchronization checking at the start of an SMTP
338 session; change 4.31/43 added the unwanted input to the log line - except
339 that it did not do this in the start of session case. It now does.
341 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
342 This is wrong and can cause the other end to generate a synchronization
343 error if it is another Exim or anything else that does the synchronization
344 check. A QUIT command is no longer sent after a timeout.
346 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
349 74. The defer_ok option of callout verification was not working if it was used
350 when verifying addresses in header lines, that is, for this case:
352 verify = header_sender/callout=defer_ok
354 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
355 those file descriptors could be used for SMTP connections. If anything
356 wrote to stderr (the example that came up was "warn" in embedded Perl), it
357 could be sent to the SMTP client, causing chaos. The daemon now opens
358 stdin, stdout, and stderr to /dev/null when it puts itself into the
361 76. Arrange for output from Perl's "warn" command to be written to Exim's main
362 log by default. The user can override this with suitable Perl magic.
364 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
365 the log message when discard triggers, was not working for the DATA ACL or
366 for the non-SMTP ACL.
368 78. Error message wording change in sieve.c.
370 79. If smtp_accept_max_per_host was set, the number of connections could be
371 restricted to fewer than expected, because the daemon was trying to set up
372 a new connection before checking whether the processes handling previous
373 connections had finished. The check for completed processes is now done
374 earlier. On busy systems, this bug wouldn't be noticed because something
375 else would have woken the daemon, and it would have reaped the completed
378 80. If a message was submitted locally by a user whose login name contained one
379 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
380 It caused a spool format error. I have fixed the spool reading code. A
381 related problem was that the "from" clause in the Received: line became
382 illegal because of the space(s). It is now covered by ${quote_local_part.
384 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
387 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
389 83. Patch from Sieve maintainer to fix unterminated string problem in
392 84. Some minor changes to the Linux configuration files to help with other
393 OS variants using glibc.
396 ----------------------------------------------------
397 See the note above about the 4.44 and 4.50 releases.
398 ----------------------------------------------------
404 1. Change 4.43/35 introduced a bug that caused file counts to be
405 incorrectly computed when quota_filecount was set in an appendfile
408 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
409 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
412 3. Give more explanation in the error message when the command for a transport
413 filter fails to execute.
415 4. There are several places where Exim runs a non-Exim command in a
416 subprocess. The SIGUSR1 signal should be disabled for these processes. This
417 was being done only for the command run by the queryprogram router. It is
418 now done for all such subprocesses. The other cases are: ${run, transport
419 filters, and the commands run by the lmtp and pipe transports.
421 5. Some older OS have a limit of 256 on the maximum number of file
422 descriptors. Exim was using setrlimit() to set 1000 as a large value
423 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
424 systems. I've change it so that if it can't get 1000, it tries for 256.
426 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
427 was an oversight, and furthermore, ever since the addition of extra
428 controls (e.g. 4.43/32), the checks on when to allow different forms of
429 "control" were broken. There should now be diagnostics for all cases when a
430 control that does not make sense is encountered.
432 7. $recipients is now available in the predata ACL (oversight).
434 8. Tidy the search cache before the fork to do a delivery from a message
435 received from the command line. Otherwise the child will trigger a lookup
436 failure and thereby defer the delivery if it tries to use (for example) a
437 cached ldap connection that the parent has called unbind on.
439 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
440 of $address_data from the recipient verification was clobbered by the
443 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
444 was its contents. (It was OK if the option was not defined at all.)
446 11. A "Completed" log line is now written for messages that are removed from
447 the spool by the -Mrm option.
449 12. $host_address is now set to the target address during the checking of
452 13. When checking ignore_target_hosts for an ipliteral router, no host name was
453 being passed; this would have caused $sender_host_name to have been used if
454 matching the list had actually called for a host name (not very likely,
455 since this list is usually IP addresses). A host name is now passed as
458 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
459 code that specifies a non-restarting handler (typically sigaction() in
460 modern systems) in an attempt to fix a rare and obscure crash bug.
462 15. Narrowed the window for a race in the daemon that could cause it to ignore
463 SIGCHLD signals. This is not a major problem, because they are used only to
464 wake it up if nothing else does.
466 16. A malformed maildirsize file could cause Exim to calculate negative values
467 for the mailbox size or file count. Odd effects could occur as a result.
468 The maildirsize information is now recalculated if the size or filecount
471 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
472 support for a long time. Removed HAVE_SYS_VFS_H.
474 18. Updated exipick to current release from John Jetmore.
476 19. Allow an empty sender to be matched against a lookup in an address list.
477 Previously the only cases considered were a regular expression, or an
480 20. Exim went into a mad DNS lookup loop when doing a callout where the
481 host was specified on the transport, if the DNS lookup yielded more than
484 21. The RFC2047 encoding function was originally intended for short strings
485 such as real names; it was not keeping to the 75-character limit for
486 encoded words that the RFC imposes. It now respects the limit, and
487 generates multiple encoded words if necessary. To be on the safe side, I
488 have increased the buffer size for the ${rfc2047: expansion operator from
491 22. Failure to deliver a bounce message always caused it to be frozen, even if
492 there was an errors_to setting on the router. The errors_to setting is now
495 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
496 canonical form (fully expanded) before being placed in
497 $sender_host_address.
499 24. Updated eximstats to version 1.33
501 25. Include certificate and key file names in error message when GnuTLS fails
502 to set them up, because the GnuTLS error message doesn't include the name
503 of the failing file when there is a problem reading it.
505 26. Expand error message when OpenSSL has problems setting up cert/key files.
508 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
509 (this can affect the format of dates).
511 28. exim_tidydb, when checking for the continued existence of a message for
512 which it has found a message-specific retry record, was not finding
513 messages that were in split spool directories. Consequently, it was
514 deleting retry records that should have stayed in existence.
516 29. eximstats updated to version 1.35
517 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
518 1.35 - bugfix such that pie charts by volume are generated correctly
520 30. The SPA authentication driver was not abandoning authentication and moving
521 on to the next authenticator when an expansion was forced to fail,
522 contradicting the general specification for all authenticators. Instead it
523 was generating a temporary error. It now behaves as specified.
525 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
526 (the order specifies the preference for clients). The order is now AES256,
527 AES128, 3DES, ARCFOUR128.
529 31. Small patch to Sieve code - explicitly set From: when generating an
532 32. Exim crashed if a remote delivery caused a very long error message to be
533 recorded - for instance if somebody sent an entire SpamAssassin report back
534 as a large number of 550 error lines. This bug was coincidentally fixed by
535 increasing the size of one of Exim's internal buffers (big_buffer) that
536 happened as part of the Exiscan merge. However, to be on the safe side, I
537 have made the code more robust (and fixed the comments that describe what
540 33. Some experimental protocols are using DNS PTR records for new purposes. The
541 keys for these records are domain names, not reversed IP addresses. The
542 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
543 leaves it alone. Component reversal etc. now happens only for IP addresses.
546 34. The host_aton() function is supposed to be passed a string that is known
547 to be a valid IP address. However, in the case of IPv6 addresses, it was
548 not checking this. This is a hostage to fortune. Exim now panics and dies
549 if the condition is not met. A case was found where this could be provoked
550 from a dnsdb PTR lookup with an IPv6 address that had more than 8
551 components; fortuitously, this particular loophole had already been fixed
552 by change 4.50/55 or 4.44/33 above.
554 If there are any other similar loopholes, the new check in host_aton()
555 itself should stop them being exploited. The report I received stated that
556 data on the command line could provoke the exploit when Exim was running as
557 exim, but did not say which command line option was involved. All I could
558 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
562 35. There was a buffer overflow vulnerability in the SPA authentication code
563 (which came originally from the Samba project). I have added a test to the
564 spa_base64_to_bits() function which I hope fixes it.
567 36. The daemon start-up calls getloadavg() while still root for those OS that
568 need the first call to be done as root, but it missed one case: when
569 deliver_queue_load_max is set with deliver_drop_privilege. This is
570 necessary for the benefit of the queue runner, because there is no re-exec
571 when deliver_drop_privilege is set.
573 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
574 was in use, was not putting the data itself into the right store pool;
575 consequently, it could be overwritten for a subsequent message in the same
576 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
579 38. Sometimes the final signoff response after QUIT could fail to get
580 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
581 < 0 before doing a fflush(). This bug looks as though it goes back to the
582 introduction of TLS in release 3.20, but "sometimes" must have been rare
583 because the tests only now provoked it.
589 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
590 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
591 Now it returns an integer. A number of calls were still expecting a T/F
592 return. Fortuitously, in all cases, the tests worked in OK situations,
593 which is the norm. However, things would have gone wrong on any write
594 failures on the smtp file descriptor. This function is used when sending
595 messages over SMTP and also when doing verify callouts.
597 2. When Exim is called to do synchronous delivery of a locally submitted
598 message (the -odf or -odi options), it no longer closes stderr before doing
601 3. Implemented the mua_wrapper option.
603 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
605 5. Implemented the functions header_remove(), header_testname(),
606 header_add_at_position(), and receive_remove_recipient(), and exported them
609 6. If an ACL "warn" statement specified the addition of headers, Exim already
610 inserted X-ACL-Warn: at the start if there was no header name. However, it
611 was not making this test for the second and subsequent header lines if
612 there were newlines in the string. This meant that an invalid header could
613 be inserted if Exim was badly configured.
615 7. Allow an ACL "warn" statement to add header lines at the start or after all
616 the Received: headers, as well as at the end.
618 8. Added the rcpt_4xx retry error code.
620 9. Added postmaster_mailfrom=xxx to callout verification option.
622 10. Added mailfrom=xxxx to the callout verification option, for verify=
625 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
626 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
628 12. Inserted some casts to stop certain compilers warning when using pointer
629 differences as field lengths or precisions in printf-type calls (mostly
630 affecting debugging statements).
632 13. Added optional readline() support for -be (dynamically loaded).
634 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
635 same clock tick as a message's arrival, so that its received time was the
636 same as the "first fail" time on the retry record, and that message
637 remained on the queue past the ultimate address timeout, every queue runner
638 would try a delivery (because it was past the ultimate address timeout) but
639 after another failure, the ultimate address timeout, which should have then
640 bounced the address, did not kick in. This was a "< instead of <=" error;
641 in most cases the first failure would have been in the next clock tick
642 after the received time, and all would be well.
644 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
645 being recognized when the domain list was tested by the match_domain
646 condition in an expansion string.
648 16. Added the ${str2b64: operator.
650 17. Exim was always calling setrlimit() to set a large limit for the number of
651 processes, without checking whether the existing limit was already
652 adequate. (It did check for the limit on file descriptors.) Furthermore,
653 errors from getrlimit() and setrlimit() were being ignored. Now they are
654 logged to the main and panic logs, but Exim does carry on, to try to do its
655 job under whatever limits there are.
657 18. Imported PCRE 5.0.
659 19. Trivial typo in log message " temporarily refused connection" (the leading
662 20. If the log selector return_path_on_delivery was set and an address was
663 redirected to /dev/null, the delivery process crashed because it assumed
664 that a return path would always be set for a "successful" delivery. In this
665 case, the whole delivery is bypassed as an optimization, and therefore no
668 21. Internal re-arrangement: the function for sending a challenge and reading
669 a response while authentication was assuming a zero-terminated challenge
670 string. It's now changed to take a pointer and a length, to allow for
671 binary data in such strings.
673 22. Added the cyrus_sasl authenticator (code supplied by MBM).
675 23. Exim was not respecting finduser_retries when seeking the login of the
676 uid under which it was called; it was always trying 10 times. (The default
677 setting of finduser_retries is zero.) Also, it was sleeping after the final
678 failure, which is pointless.
680 24. Implemented tls_on_connect_ports.
682 25. Implemented acl_smtp_predata.
684 26. If the domain in control=submission is set empty, Exim assumes that the
685 authenticated id is a complete email address when it generates From: or
686 Sender: header lines.
688 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
689 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
690 chown and chgrp in /bin and hostname in /usr/bin.
692 28. Exim was keeping the "process log" file open after each use, just as it
693 does for the main log. This opens the possibility of it remaining open for
694 long periods when the USR1 signal hits a daemon. Occasional processlog
695 errors were reported, that could have been caused by this. Anyway, it seems
696 much more sensible not to leave this file open at all, so that is what now
699 29. The long-running daemon process does not normally write to the log once it
700 has entered its main loop, and it closes the log before doing so. This is
701 so that log files can straightforwardly be renamed and moved. However,
702 there are a couple of unusual error situations where the daemon does write
703 log entries, and I had neglected to close the log afterwards.
705 30. The text of an SMTP error response that was received during a remote
706 delivery was being truncated at 512 bytes. This is too short for some of
707 the long messages that one sometimes sees. I've increased the limit to
710 31. It is now possible to make retry rules that apply only when a message has a
711 specific sender, in particular, an empty sender.
713 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
714 it possible to be selective about when SMTP synchronization is enforced.
716 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
718 32. Implemented hosts_connection_nolog.
720 33. Added an ACL for QUIT.
722 34. Setting "delay_warning=" to disable warnings was not working; it gave a
725 35. Added mailbox_size and mailbox_filecount to appendfile.
727 36. Added control = no_multiline_responses to ACLs.
729 37. There was a bug in the logic of the code that waits for the clock to tick
730 in the case where the clock went backwards by a substantial amount such
731 that the microsecond fraction of "now" was more than the microsecond
732 fraction of "then" (but the whole seconds number was less).
734 38. Added support for the libradius Radius client library this is found on
735 FreeBSD (previously only the radiusclient library was supported).
741 1. When certain lookups returned multiple values in the form name=value, the
742 quoting of the values was not always being done properly. Specifically:
743 (a) If the value started with a double quote, but contained no whitespace,
745 (b) If the value contained whitespace other than a space character (i.e.
746 tabs or newlines or carriage returns) it was not quoted.
747 This fix has been applied to the mysql and pgsql lookups by writing a
748 separate quoting function and calling it from the lookup code. The fix
749 should probably also be applied to nisplus, ibase and oracle lookups, but
750 since I cannot test any of those, I have not disturbed their existing code.
752 2. A hit in the callout cache for a specific address caused a log line with no
753 reason for rejecting RCPT. Now it says "Previous (cached) callout
754 verification failure".
756 3. There was an off-by-one bug in the queryprogram router. An over-long
757 return line was truncated at 256 instead of 255 characters, thereby
758 overflowing its buffer with the terminating zero. As well as fixing this, I
759 have increased the buffer size to 1024 (and made a note to document this).
761 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
762 when Exim is waiting for an SMTP response from a remote server, Exim
763 restarts its select() call on the socket, thereby resetting its timeout.
764 This is not a problem when such interrupts are rare. Somebody set up a cron
765 job to run exiwhat every 2 minutes, which is less than the normal select()
766 timeout (5 or 10 minutes). This meant that the select() timeout never
767 kicked in because it was always reset. I have fixed this by comparing the
768 time when an interrupt arrives with the time at the start of the first call
769 to select(). If more time than the timeout has elapsed, the interrupt is
770 treated as a timeout.
772 5. Some internal re-factoring in preparation for the addition of Sieve
773 extensions (by MH). In particular, the "personal" test is moved to a
774 separate function, and given an option for scanning Cc: and Bcc: (which is
775 not set for Exim filters).
777 6. When Exim created an email address using the login of the caller as the
778 local part (e.g. when creating a From: or Sender: header line), it was not
779 quoting the local part when it contained special characters such as @.
781 7. Installed new OpenBSD configuration files.
783 8. Reworded some messages for syntax errors in "and" and "or" conditions to
784 try to make them clearer.
786 9. Callout options, other than the timeout value, were being ignored when
787 verifying sender addresses in header lines. For example, when using
789 verify = header_sender/callout=no_cache
791 the cache was (incorrectly) being used.
793 10. Added a missing instance of ${EXE} to the exim_install script; this affects
794 only the Cygwin environment.
796 11. When return_path_on_delivery was set as a log selector, if different remote
797 addresses in the same message used different return paths and parallel
798 remote delivery occurred, the wrong values would sometimes be logged.
799 (Whenever a remote delivery process finished, the return path value from
800 the most recently started remote delivery process was logged.)
802 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
803 lines when AUTH and/or TLS are in use. This is the "received protocol"
804 field. Exim used to use "asmtp" for authenticated SMTP, without any
805 indication (in the protocol name) for TLS use. Now it follows the RFC and
806 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
807 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
808 names appear in log lines as well as in Received: header lines.
810 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
811 extensions, and comparison tests, and to fix some bugs.
813 14. Changes to the "personal" filter test:
815 (1) The test was buggy in that it was just doing the equivalent of
816 "contains" tests on header lines. For example, if a user's address was
817 anne@some.where, the "personal" test would incorrectly be true for
819 To: susanne@some.where
821 This test is now done by extracting each address from the header in turn,
822 and checking the entire address. Other tests that are part of "personal"
823 are now done using regular expressions (for example, to check local parts
824 of addresses in From: header lines).
826 (2) The list of non-personal local parts in From: addresses has been
827 extended to include "listserv", "majordomo", "*-request", and "owner-*",
828 taken from the Sieve specification recommendations.
830 (3) If the message contains any header line starting with "List-" it is
831 treated as non-personal.
833 (4) The test for "circular" in the Subject: header line has been removed
834 because it now seems ill-conceived.
836 15. Minor typos in src/EDITME comments corrected.
838 16. Installed latest exipick from John Jetmore.
840 17. If headers_add on a router specified a text string that was too long for
841 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
842 of string_sprintf() is now avoided.
844 18. $message_body_size was not set (it was always zero) when running the DATA
845 ACL and the local_scan() function.
847 19. For the "mail" command in an Exim filter, no default was being set for
848 the once_repeat time, causing a random time value to be used if "once" was
849 specified. (If the value happened to be <= 0, no repeat happened.) The
850 default is now 0s, meaning "never repeat". The "vacation" command was OK
851 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
852 (I found it when inspecting the code).
854 20. There is now an overall timeout for performing a callout verification. It
855 defaults to 4 times the callout timeout, which applies to individual SMTP
856 commands during the callout. The overall timeout applies when there is more
857 than one host that can be tried. The timeout is checked before trying the
858 next host. This prevents very long delays if there are a large number of
859 hosts and all are timing out (e.g. when the network connections are timing
860 out). The value of the overall timeout can be changed by specifying an
861 additional sub-option for "callout", called "maxwait". For example:
863 verify = sender/callout=5s,maxwait=20s
865 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
866 to the end before writing, but this should make it even safer).
868 22. Exim was forgetting that it had advertised PIPELINING for the second and
869 subsequent messages on an SMTP connection. It was also not resetting its
870 memory on STARTTLS and an internal HELO.
872 23. When Exim logs an SMTP synchronization error within a session, it now
873 records whether PIPELINING has been advertised or not.
875 24. Added 3 instances of "(long int)" casts to time_t variables that were being
876 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
877 rather than long int.
879 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
881 26. Added the never_mail option to autoreply.
887 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
888 crash if the getsockname() call failed; this can happen if a connection is
889 closed very soon after it is established. The problem was simply in the
890 order in which certain operations were done, causing Exim to try to write
891 to the SMTP stream before it had set up the file descriptor. The bug has
892 been fixed by making things happen in the correct order.
898 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
899 before the connection was closed, thus losing the rejection response.
901 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
902 some early Solaris releases, but causes trouble in current releases where
903 socklen_t is defined.
905 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
908 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
911 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
912 that releasing the top of it at the end releases what was used for sub-
913 expansions (unless the block got too big). However, discard this block if
914 the first thing is a variable or header, so that we can use its block when
915 it is dynamic (useful for very large $message_headers, for example).
917 6. Lookups now cache *every* query, not just the most recent. A new, separate
918 store pool is used for this. It can be recovered when all lookup caches are
919 flushed. Lookups now release memory at the end of their result strings.
920 This has involved some general refactoring of the lookup sources.
922 7. Some code has been added to the store_xxx() functions to reduce the amount
923 of flapping under certain conditions.
925 8. log_incoming_interface used to affect only the <= reception log lines. Now
926 it causes the local interface and port to be added to several more SMTP log
927 lines, for example "SMTP connection from", and rejection lines.
929 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
931 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
933 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
934 could be overwritten at the end of the current message (or the start of a
935 new message if it was set in a HELO ACL). The value is now preserved for
936 the duration of the SMTP connection.
938 12. If a transport had a headers_rewrite setting, and a matching header line
939 contained an unqualified address, that address was qualified, even if it
940 did not match any rewriting rules. The underlying bug was that the values
941 of the flags that permit the existence of unqualified sender and recipient
942 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
943 non-local messages, and by -bnq for local messages) were not being
944 preserved with the message after it was received.
946 13. When Exim was logging an SMTP synchronization error, it could sometimes log
947 "next input=" as part of the text comprising the host identity instead of
948 the correct text. The code was using the same buffer for two different
949 strings. However, depending on which order the printing function evaluated
950 its arguments, the bug did not always show up. Under Linux, for example, my
951 test suite worked just fine.
953 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
954 doesn't work with some older versions of Perl. It has been changed to "my",
955 which in any case is probably the better facility to use.
957 15. A really picky compiler found some instances of statements for creating
958 error messages that either had too many or two few arguments for the format
961 16. The size of the buffer for calls to the DNS resolver has been increased
962 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
963 for addresses that have a lot of PTR records. This alleviates a problem; it
964 does not fully solve it.
966 17. A dnsdb lookup for PTR records that receives more data than will fit in the
967 buffer now truncates the list and logs the incident, which is the same
968 action as happens when Exim is looking up a host name and its aliases.
969 Previously in this situation something unpredictable would happen;
970 sometimes it was "internal error: store_reset failed".
972 18. If a server dropped the connection unexpectedly when an Exim client was
973 using GnuTLS and trying to read a response, the client delivery process
974 crashed while trying to generate an error log message.
976 19. If a "warn" verb in an ACL added multiple headers to a message in a single
979 warn message = H1: something\nH2: something
981 the text was added as a single header line from Exim's point of view
982 though it ended up OK in the delivered message. However, searching for the
983 second and subsequent header lines using $h_h2: did not work. This has been
984 fixed. Similarly, if a system filter added multiple headers in this way,
985 the routers could not see them.
987 20. Expanded the error message when iplsearch is called with an invalid key to
988 suggest using net-iplsearch in a host list.
990 21. When running tests using -bh, any delays imposed by "delay" modifiers in
991 ACLs are no longer actually imposed (and a message to that effect is
994 22. If a "gecos" field in a passwd entry contained escaped characters, in
995 particular, if it contained a \" sequence, Exim got it wrong when building
996 a From: or a Sender: header from that name. A second bug also caused
997 incorrect handling when an unquoted " was present following a character
1000 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1001 was not being matched caselessly.
1003 24. Arranged for all hyphens in the exim.8 source to be escaped with
1006 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1007 properly. Recipient callout cache records were still being keyed to include
1008 the sender, even when use_sender was set false. This led to far more
1009 callouts that were necessary. The sender is no longer included in the key
1010 when use_sender is false.
1012 26. Added "control = submission" modifier to ACLs.
1014 27. Added the ${base62d: operator to decode base 62 numbers.
1016 28. dnsdb lookups can now access SRV records.
1018 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1019 the configuration file.
1021 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1022 (-v) mode. This makes the output for a verbose queue run more intelligible.
1024 31. Added a use_postmaster feature to recipient callouts.
1026 32. Added the $body_zerocount variable, containing the number of binary zero
1027 bytes in the message body.
1029 33. The time of last modification of the "new" subdirectory is now used as the
1030 "mailbox time last read" when there is a quota error for a maildir
1033 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
1035 35. Added +ignore_unknown as a special item in host lists.
1037 36. Code for decoding IPv6 addresses in host lists is now included, even if
1038 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1039 address was recognized as an IP address, but was then not correctly decoded
1040 into binary, causing unexpected and incorrect effects when compared with
1047 1. Very minor rewording of debugging text in manualroute to say "list of
1048 hosts" instead of "hostlist".
1050 2. If verify=header_syntax was set, and a header line with an unqualified
1051 address (no domain) and a large number of spaces between the end of the
1052 name and the colon was received, the reception process suffered a buffer
1053 overflow, and (when I tested it) crashed. This was caused by some obsolete
1054 code that should have been removed. The fix is to remove it!
1056 3. When running in the test harness, delay a bit after writing a bounce
1057 message to get a bit more predictability in the log output.
1059 4. Added a call to search_tidyup() just before forking a reception process. In
1060 theory, someone could use a lookup in the expansion of smtp_accept_max_
1061 per_host which, without the tidyup, could leave open a database connection.
1063 5. Added the variables $recipient_data and $sender_data which get set from a
1064 lookup success in an ACL "recipients" or "senders" condition, or a router
1065 "senders" option, similar to $domain_data and $local_part_data.
1067 6. Moved the writing of debug_print from before to after the "senders" test
1070 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1071 problems for message scanning, either using a data ACL, or using
1072 local_scan() because the Received: header was not generated till after they
1073 were called (in order to set the time as the time of reception completion).
1074 I have revised the way this works. The header is now generated after the
1075 body is received, but before the ACL or local_scan() are called. After they
1076 are run, the timestamp in the header is updated.
1082 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1083 before starting a queue runner without re-exec. This happened only when
1084 deliver_drop_privilege was set or when the Exim user was set to root. The
1085 effect of the bug was that timeouts during subsequent deliveries caused
1086 crashes instead of being properly handled. The handler is now left at its
1087 default (and expected) setting.
1089 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1090 message, again when deliver_drop_privilege is set or Exim is run as root.
1091 The bug described in (1) was not present in this case, but the tidying up
1092 of the other signals was missing. I have made the two cases consistent.
1094 3. The ignore_target_hosts setting on a manualroute router was being ignored
1095 for hosts that were looked up using the /MX notation.
1097 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1100 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1101 operated on the sender address. After changing the $sender_address to <>
1102 for the sender address verify, Exim was re-instated it as the original
1103 (before rewriting) address, but remembering that it had rewritten it, so it
1104 wasn't rewriting it again. This bug also had the effect of breaking the
1105 sender address verification caching when the sender address was rewritten.
1107 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1108 This has been changed so that if the ip literal address matches
1109 ignore_target_hosts, the router declines.
1111 7. Added expansion conditions match_domain, match_address, and match_local_
1112 part (NOT match_host).
1114 8. The placeholder for the Received: header didn't have a length field set.
1116 9. Added code to Exim itself and to exim_lock to test for a specific race
1117 condition that could lead to file corruption when using MBX delivery. The
1118 issue is with the lockfile that is created in /tmp. If this file is removed
1119 after a process has opened it but before that process has acquired a lock,
1120 there is the potential for a second process to recreate the file and also
1121 acquire a lock. This could lead to two Exim processes writing to the file
1122 at the same time. The added code performs the same test as UW imapd; it
1123 checks after acquiring the lock that its file descriptor still refers to
1124 the same named file.
1126 10. The buffer for building added header lines was of fixed size, 8192 bytes.
1127 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1130 11. Added the smtp_active_hostname option. If used, this will typically be made
1131 to depend on the incoming interface address. Because $interface_address is
1132 not set up until the daemon has forked a reception process, error responses
1133 that can happen earlier (such as "too many connections") no longer contain
1136 12. If an expansion in a condition on a "warn" statement fails because a lookup
1137 defers, the "warn" statement is abandoned, and the next ACL statement is
1138 processed. Previously this caused the whole ACL to be aborted.
1140 13. Added the iplsearch lookup type.
1142 14. Added ident_timeout as a log selector.
1144 15. Added tls_certificate_verified as a log selector.
1146 16. Added a global option tls_require_ciphers (compare the smtp transport
1147 option of the same name). This controls incoming TLS connections.
1149 17. I finally figured out how to make tls_require_ciphers do a similar thing
1150 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1151 before starting the TLS session.
1153 18. Tabs are now shown as \t in -bP output.
1155 19. If the log selector return_path_on_delivery was set, Exim crashed when
1156 bouncing a message because it had too many Received: header lines.
1158 20. If two routers both had headers_remove settings, and the first one included
1159 a superfluous trailing colon, the final name in the first list and the
1160 first name in the second list were incorrectly joined into one item (with a
1161 colon in the middle).
1167 1. Added -C and -D options to the exinext utility, mainly to make it easier
1168 to include in the automated testing, but these could be helpful when
1169 multiple configurations are in use.
1171 2. The exinext utility was not formatting the output nicely when there was
1172 an alternate port involved in the retry record key, nor when there was a
1173 message id as well (for retries that were specific to a specific message
1174 and a specific host). It was also confused by IPv6 addresses, because of
1175 the additional colons they contain. I have fixed the IPv4 problem, and
1176 patched it up to do a reasonable job for IPv6.
1178 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1179 delivery, the log line now contains "pipelined" if PIPELINING was used.
1181 4. An SMTP transport process used to panic and die if the bind() call to set
1182 an explicit outgoing interface failed. This has been changed; it is now
1183 treated in the same way as a connect() failure.
1185 5. A reference to $sender_host_name in the part of a conditional expansion
1186 that was being skipped was still causing a DNS lookup. This no longer
1189 6. The def: expansion condition was not recognizing references to header lines
1190 that used bh_ and bheader_.
1192 7. Added the _cache feature to named lists.
1194 8. The code for checking quota_filecount in the appendfile transport was
1195 allowing one more file than it should have been.
1197 9. For compatibility with Sendmail, the command line option
1205 and sets the incoming protocol and host name (for trusted callers). The
1206 host name and its colon can be omitted when only the protocol is to be set.
1207 Note the Exim already has two private options, -pd and -ps, that refer to
1208 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1209 "s", but I don't think that's a major issue.
1211 10. A number of refactoring changes to the code, none of which should affect
1214 (a) The number of logging options was getting close to filling up the
1215 32-bit word that was used as a bit map. I have split them into two classes:
1216 those that are passed in the argument to log_write(), and those that are
1217 only ever tested independently outside of that function. These are now in
1218 separate 32-bit words, so there is plenty of room for expansion again.
1219 There is no change in the user interface or the logging behaviour.
1221 (b) When building, for example, log lines, the code previously used a
1222 macro that called string_cat() twice, in order to add two strings. This is
1223 not really sufficiently general. Furthermore, there was one instance where
1224 it was actually wrong because one of the argument was used twice, and in
1225 one call a function was used. (As it happened, calling the function twice
1226 did not affect the overall behaviour.) The macro has been replaced by a
1227 function that can join an arbitrary number of extra strings onto a growing
1230 (c) The code for expansion conditions now uses a table and a binary chop
1231 instead of a serial search (which was left over from when there were very
1232 few conditions). Also, it now recognizes conditions like "pam" even when
1233 the relevant support is not compiled in: a suitably worded error message is
1234 given if an attempt is made to use such a condition.
1236 11. Added ${time_interval:xxxxx}.
1238 12. A bug was causing one of the ddress fields not to be passed back correctly
1239 from remote delivery subprocesses. The field in question was not being
1240 subsequently used, so this caused to problems in practice.
1242 13. Added new log selectors queue_time and deliver_time.
1244 14. Might have fixed a bug in maildirsizefile handling that threw up
1245 "unexpected character" debug warnings, and recalculated the data
1246 unnecessarily. In any case, I expanded the warning message to give more
1249 15. Added the message "Restricted characters in address" to the statements in
1250 the default ACL that block characters like @ and % in local parts.
1252 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
1253 Three changes have been made:
1255 (a) There was a serious bug; a negative response to MAIL caused the whole
1256 recipient domain to be cached as invalid, thereby blocking all messages
1257 to all local parts at the same domain, from all senders. This bug has
1258 been fixed. The domain is no longer cached after a negative response to
1259 MAIL if the sender used is not empty.
1261 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1264 (c) A new callout option, "use_sender" has been added for people who want
1265 the modified behaviour.
1271 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1274 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1275 indeed breaks things for older releases.
1277 3. Added additional logging to the case where there is a problem reading data
1278 from a filter that is running in a subprocess using a pipe, in order to
1279 try to track down a specific problem.
1281 4. Testing facility fudge: when running in the test harness and attempting
1282 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1283 getting "No route to host". Convert this to a timeout.
1285 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1288 6. Some OS don't have socklen_t but use size_t instead. This affects the
1289 fifth argument of getsockopt() amongst other things. This is now
1290 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1291 can be set for individual OS. I have set it for SunOS5, OSF1, and
1292 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1293 some earlier ones do not.
1295 7. Change 4.30/15 was not doing the test caselessly.
1297 8. The standard form for an IPv6 address literal was being rejected by address
1298 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1299 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1300 this, as well as the form without the "IPv6" on the front (but only when
1301 address literals are enabled, of course).
1303 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
1305 10. Exim crashed if a message with an empty sender address specified by -f
1306 encountered a router with an errors_to setting. This could be provoked only
1307 by a command such as
1311 where an empty string was supplied; "<>" did not hit this bug.
1313 11. Installed PCRE release 4.5.
1315 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1316 remained set. It is now erased.
1318 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1319 times from message ids (which are base 36 rather than the normal 62).
1321 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1322 were being counted as actual protocol errors, and logged if the log
1323 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1324 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1325 and DATA following a set of rejected RCPTs do not count as protocol errors.
1326 In other words, Exim assumes they were pipelined, though this may not
1327 actually be the case. Of course, in all cases the client gets an
1328 appropriate error code.
1330 15. If a lookup fails in an ACL condition, a message about the failure may
1331 be available; it is used if testing the ACL cannot continue, because most
1332 such messages specify what the cause of the deferral is. However, some
1333 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1334 that caused an old message to be retained and used if a later statement
1335 caused a defer, replacing the real cause of the deferral.
1337 16. If an IP address had so many PTR records that the DNS lookup buffer
1338 was not large enough to hold them, Exim could crash while trying to process
1339 the truncated data. It now detects and logs this case.
1341 17. Further to 4.21/58, another change has been made: if (and only if) the
1342 first line of a message (the first header line) ends with CRLF, a bare LF
1343 in a subsequent header line has a space inserted after it, so as not to
1344 terminate the header.
1346 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
1347 unnecessarily, used atoi() instead of strtol(), and didn't check the
1348 termination when getting file sizes from file names by regex.
1350 19. Completely re-implemented the support for maildirsize files, in the light
1351 of a number of problems with the previous contributed implementation
1352 (4.30/29). In particular:
1354 . If the quota is zero, the maildirsize file is maintained, but no quota is
1357 . If the maildir directory does not exist, it is created before any attempt
1358 to write a maildirsize file.
1360 . The quota value in the file is just a cache; if the quota is changed in
1361 the transport, the new value overrides.
1363 . A regular expression is available for excluding directories from the
1366 20. The autoreply transport checks the characters in options that define the
1367 message's headers; it allows continued headers, but it was checking with
1368 isspace() after an embedded newline instead of explicitly looking for a
1371 21. If all the "regular" hosts to which an address was routed had passed their
1372 expiry times, and had not reached their retry times, the address was
1373 bounced, even if fallback hosts were defined. Now Exim should go on to try
1376 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1377 equivalent code in the SMTP transport. Some hosts send humungous responses
1378 to HELO/EHLO, more than 1024 it seems.
1380 23. Refactoring: code in filter.c used (void *) for "any old type" but this
1381 gives compiler warnings in some environments. I've now done it "properly",
1384 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1385 (because of problems with the built-in one) was declared to return uschar *
1386 instead of char *, causing compiler failure.
1388 25. Fixed a file descriptor leak when processing alias/forward files.
1390 26. Fixed a minor format string issue in dbfn.c.
1392 27. Typo in exim.c: ("dmbnz" for "dbmnz").
1394 28. If a filter file refered to $h_xxx or $message_headers, and the headers
1395 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1398 29. When a sender address is verified, it is cached, to save repeating the test
1399 when there is more than one recipient in a message. However, when the
1400 verification involves a callout, it is possible for different callout
1401 options to be set for different recipients. It is too complicated to keep
1402 track of this in the cache, so now Exim always runs a verification when a
1403 callout is required, relying on the callout cache for the optimization.
1404 The overhead is duplication of the address routing, but this should not be
1407 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
1408 to be verified with callout=postmaster, and the main callout worked but the
1409 postmaster check failed, the verification correctly failed. However, if a
1410 subsequent RCPT command asked for sender verification *without* the
1411 postmaster check, incorrect caching caused this verification also to fail,
1414 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1415 it was not caching the DNS options (qualify_single, search_parents) that
1416 were used when the lookup failed. A subsequent lookup with different
1417 options therefore always gave the same answer, though there were cases
1418 where it should not have. (Example: a "domains = !$mx_any" option on a
1419 dnslookup router: the "domains" option is always processed without any
1420 widening, but the router might have qualify_single set.) Now Exim uses the
1421 cached value only when the same options are set.
1423 32. Added John Jetmore's "exipick" utility to the distribution.
1425 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
1426 than a timeout (e.g. a certificate is required, and is not provided), an
1427 Exim server now closes the connection immediately. Previously it waited for
1428 the client to close - but if the client is SSL, it seems that they each
1429 wait for each other, leading to a delay before one of them times out.
1431 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1432 maintained 0.8.x compatibility because I don't think many are using it, and
1433 it is clearly obsolete.
1435 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1438 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1439 client certificate was expired. A simple patch fixes this, though I don't
1440 understand the full logic of why the verify callback is called multiple
1443 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1444 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1445 which causes problems with some clients (such as the Certicom SSL Plus
1446 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1447 disables the coutermeasure allowing Eudora to connect."
1449 38. Exim was not checking that a write() to a log file succeeded. This could
1450 lead to Bad Things if a log got too big, in particular if it hit a file
1451 size limit. Exim now panics and dies if it cannot write to a log file, just
1452 as it does if it cannot open a log file.
1454 39. Modified OS/Makefile-Linux so that it now contains
1456 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
1458 The two -D definitions ensure that Exim is compiled with large file
1459 support, which makes it possible to handle log files that are bigger than
1462 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1463 instance) a domain was checked against a named list that involved a lookup,
1464 causing $domain_data to be set, then another domain was checked against the
1465 same list, then the first domain was re-checked, the value of $domain_data
1466 after the final check could be wrong. In particular, if the second check
1467 failed, it could be set empty. This bug probably also applied to
1470 41. The strip_trailing_dot option was not being applied to the address given
1471 with the -f command-line option.
1473 42. The code for reading a message's header from the spool was incrementing
1474 $received_count, but never initializing it. This meant that the value was
1475 incorrect (doubled) while delivering a message in the same process in which
1476 it was received. In the most common configuration of Exim, this never
1477 happens - a fresh exec is done - but it can happen when
1478 deliver_drop_privilege is set.
1480 43. When Exim logs an SMTP synchronization error - client data sent too soon -
1481 it now includes up to 150 characters of the unexpected data in the log
1484 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1485 and building data strings. The size of both of these buffers was 10 000
1486 bytes - far larger than anybody would *ever* want, thought I. Needless to
1487 say, somebody hit the limit. I have increased the maximum line length to
1488 20 000 and the maximum data length of concatenated lines to 100 000. I have
1489 also fixed two bugs, because there was no checking on these buffers. Tsk,
1490 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1491 buffer is too small.
1493 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1494 lsearch lookups. Now it does.
1496 46. When parsing a route_list item in a manualroute router, a fixed-length
1497 buffer was used for the list of hosts. I made this 1024 bytes long,
1498 thinking that nobody would ever have a list of hosts that long. Wrong.
1499 Somebody had a whole pile of complicated expansion conditions, and the
1500 string was silently truncated, leading to an expansion error. It turns out
1501 that it is easier to change to an unlimited length (owing to other changes
1502 that have happened since this code was originally written) than to build
1503 structure for giving a limitation error. The length of the item that
1504 expands into the list of hosts is now unlimited.
1506 47. The lsearch lookup could not handle data where the length of text line was
1507 more than 4095 characters. Such lines were truncated, leading to shortened
1508 data being returned. It should now handle lines of any length.
1510 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
1511 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
1514 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
1515 replacing strings such as BIN_DIRECTORY in a source file: the replacement
1516 no longer happens in comment lines. A list of replacements is now placed
1517 at the head of all of the source files, except those whose only change is
1518 to replace PERL_COMMAND in the very first #! line.
1520 50. Replaced the slow insertion sort in queue.c, for sorting the list of
1521 messages on the queue, with a bottom-up merge sort, using code contributed
1522 by Michael Haardt. This should make operations like -bp somewhat faster on
1523 large queues. It won't affect queue runners, except when queue_run_in_order
1526 51. Installed eximstats 1.31 in the distribution.
1528 52. Added support for SRV lookups to the dnslookup router.
1530 53. If an ACL referred to $message_body or $message_body_end, the value was not
1531 reset for any messages that followed in the same SMTP session.
1533 54. The store-handling optimization for building very long strings was not
1534 differentiating between the different store pools. I don't think this
1535 actually made any difference in practice, but I've tidied it.
1537 55. While running the routers to verify a sender address, $sender_address
1538 was still set to the sender address. This is wrong, because when routing to
1539 send a bounce to the sender, it would be empty. Therefore, I have changed
1540 it so that, while verifying a sender address, $sender_address is set to <>.
1541 (There is no change to what happens when verifying a recipient address.)
1543 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
1544 target A or AAAA records (if not already returned) without resetting the
1545 qualify_single or search_parents options of the DNS resolver. These are
1546 inappropriate in this case because the targets of MX and SRV records must
1547 be FQDNs. A broken DNS record could cause trouble if it happened to have a
1548 target that, when qualified, matched something in the local domain. These
1549 two options are now turned off when doing these lookups.
1551 57. It seems that at least some releases of Reiserfs (which does not have the
1552 concept of a fixed number of inodes) returns zero and not -1 for the
1553 number of available inodes. This interacted badly with check_spool_inodes,
1554 which assumed that -1 was the "no such thing" setting. What I have done is
1555 to check that the total number of inodes is greater than zero before doing
1556 the test of how many are available.
1558 58. When a "warn" ACL statement has a log_message modifier, the message is
1559 remembered, and not repeated. This is to avoid a lot of repetition when a
1560 message has many recipients that cause the same warning to be written.
1561 Howewer, Exim was preserving the list of already written lines for an
1562 entire SMTP session, which doesn't seem right. The memory is now reset if a
1563 new message is started.
1565 59. The "rewrite" debugging flag was not showing the result of rewriting in the
1566 debugging output unless log_rewrite was also set.
1568 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
1569 of (int)(handle) when we know that handle contains (void *)(-1).
1571 61. The Exim daemon panic-logs an error return when it closes the incoming
1572 connection. However "connection reset by peer" seems to be common, and
1573 isn't really an error worthy of noting specially, so that particular error
1576 62. When Exim is trying to find all the local interfaces, it used to panic and
1577 die if the ioctl to get the interface flags failed. However, it seems that
1578 on at least one OS (Solaris 9) it is possible to have an interface that is
1579 included in the list of interfaces, but for which you get a failure error
1580 for this call. This happens when the interface is not "plumbed" into a
1581 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
1582 failure of the "get flags" call assumes that the interface is down.
1584 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
1585 makes life easier for people who are doing arithmetic on fields extracted
1586 from dates, where you often get leading zeros that should not be
1587 interpreted as octal.
1589 64. Added qualify_domain to the redirect router, to override the global
1592 65. If a pathologically long header line contained very many addresses (the
1593 report of this problem mentioned 10 000) and each of them was rewritten,
1594 Exim could use up a very large amount of memory. (It kept on making new
1595 copies of the header line as it rewrote, and never released the old ones.)
1596 At the expense of a bit more processing, the header rewriting function has
1597 been changed so that it no longer eats memory in this way.
1599 66. The generation of the Received: header has been moved from the time that a
1600 message starts to be received, to the time that it finishes. The timestamp
1601 in the Received: header should now be very close to that of the <= log
1602 line. There are two side-effects of this change:
1604 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
1605 logged header lines no longer include the local Received: line, because
1606 it has not yet been created. The same applies to a copy of the message
1607 that is returned to a non-SMTP sender when a message is rejected.
1609 (b) When a filter file is tested using -bf, no additional Received: header
1610 is added to the test message. After some thought, I decided that this
1613 This change does not affect the value of $received_for. It is still set
1614 after address rewriting, but before local_scan() is called.
1616 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
1618 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
1619 gave an unhelpful panic error message, and a defer error. I have managed to
1620 change this behaviour so that it now rejects any supplied certificate,
1621 which seems right, as the list of acceptable certificates is empty.
1623 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
1624 gave an unhelpful defer error. I have not managed to make this reject any
1625 supplied certificates, but the error message it gives is "no certificate
1626 supplied", which is not helpful.
1628 70. exigrep's output now also includes lines that are not associated with any
1629 message, but which match the given pattern. Implemented by a patch from
1630 Martin Sluka, which also tidied up the Perl a bit.
1632 71. Recipient callout verification, like sender verification, was using <> in
1633 the MAIL FROM command. This isn't really the right thing, since the actual
1634 sender may affect whether the remote host accepts the recipient or not. I
1635 have changed it to use the actual sender in the callout; this means that
1636 the cache record is now keyed on a recipient/sender pair, not just the
1637 recipient address. There doesn't seem to be a real danger of callout loops,
1638 since a callout by the remote host to check the sender would use <>.
1639 [SEE ABOVE: changed after hitting problems.]
1641 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
1642 temporary errors. However, in the case of such a code being given after
1643 the end of a data transmission (i.e. after ".") Exim was failing to write
1644 a retry record for the message. (Yes, there was some broken host that was
1645 actually sending 8xx at this point.)
1647 73. An unknown lookup type in a host list could cause Exim to panic-die when
1648 the list was checked. (An example that provoked this was putting <; in the
1649 middle of a list instead of at the start.) If this happened during a DATA
1650 ACL check, a -D file could be left lying around. This kind of configuration
1651 error no longer causes Exim to die; instead it causes a defer errror. The
1652 incident is still logged to the main and panic logs.
1654 74. Buglet left over from Exim 3 conversion. The message "too many messages
1655 in one connection" was written to the rejectlog but not the mainlog, except
1656 when address rewriting (yes!) was being logged.
1658 75. Added write_rejectlog option.
1660 76. When a system filter was run not as root (that is, when system_filter_user
1661 was set), the values of the $n variables were not being returned to the
1662 main process; thus, they were not subsequently available in the $sn
1665 77. Added +return_path_on_delivery log selector.
1667 78. A connection timeout was being treated differently from recipients deferred
1668 when testing hosts_max_try with a message that was older than the host's
1669 retry timeout. (The host should not be counted, thus allowing all hosts to
1670 be tried at least once before bouncing.) This may have been the cause of an
1671 occasionally reported bug whereby a message would remain on the queue
1672 longer than the retry timeout, but would be bounced if a delivery was
1673 forced. I say "may" because I never totally pinned down the problem;
1674 setting up timeout/retry tests is difficult. See also the next item.
1676 79. The ultimate address timeout was not being applied to errors that involved
1677 a combination of host plus message (for example, a timeout on a MAIL
1678 command). When an address resolved to a number of possible hosts, and they
1679 were not all tried for each delivery (e.g. because of hosts_max_try), a
1680 message could remain on the queue longer than the retry timeout.
1682 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
1685 81. Fixed an obscure SMTP outgoing bug which required at least the following
1686 conditions: (a) there was another message waiting for the same server;
1687 (b) the server returned 5xx to all RCPT commands in the first message so
1688 that the message was not completed; (c) the server dropped the connection
1689 or gave a negative response to the RSET that Exim sends to abort the
1690 transaction. The observed case was a dropped connection after DATA that had
1691 been sent in pipelining mode. That is, the server had advertised PIPELINING
1692 but was not implementing it correctly. The effect of the bug was incorrect
1693 behaviour, such as trying another host, and this could lead to a crash.
1699 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
1700 and daemon.c were passed as pointers to ints; they should have been
1701 pointers to socklen_t variables (which are typically unsigned ints).
1703 2. Some signed/unsigned type warnings in the os.c file for Linux have been
1706 3. Fixed a really odd bug that affected only the testing scheme; patching a
1707 certain fixed string in the binary changed the value of another string that
1708 happened to be identical to the end of the original first string.
1710 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
1711 name", it returns that address as the IP address. On some operating
1712 systems (e.g. Solaris), it also passes back the IP address string as the
1713 "host name". However, on others (e.g. Linux), it passes back an empty
1714 string. Exim wasn't checking for this, and was changing the host name to an
1715 empty string, assuming it had been canonicized.
1717 5. Although rare, it is permitted to have more than one PTR record for a given
1718 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
1719 all the names associated with an address, because they do in Solaris.
1720 However, it seems that they do not in Linux for data that comes from the
1721 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
1722 I found this out when I moved to a new Linux workstation and tried to run
1723 the Exim test suite.
1725 To get round this problem I have changed the code so that it now does its
1726 own call to the DNS to look up PTR records when searching for a host name.
1727 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
1728 addresses that are only in /etc/hosts are still found.
1730 This behaviour is, however, controlled by an option called host_lookup_
1731 order, which defaults to "bydns:byaddr". If people want to use the other
1732 order, or indeed, just use one or the other means of lookup, they can
1733 specify it in this variable.
1735 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
1736 some operating systems, this comes back from gethostbyaddr() as an empty
1737 string, and this is what Exim used to test for. However, it seems that in
1738 other systems, "." is yielded. Exim now tests for this case too.
1740 7. The values of check_spool_space and check_log_space are now held internally
1741 as a number of kilobytes instead of an absolute number of bytes. If a
1742 numbers is specified without 'K' or 'M', it is rounded up to the nearest
1743 kilobyte. This means that much larger values can be stored.
1745 8. Exim monitor: an attempt to get the action menu when not actually pointing
1746 at a message produces an empty menu entitled "No message selected". This
1747 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
1748 no entries in it ("Shell widget menu has zero width and/or height"). So I
1749 have added a single, blank menu entry in this case.
1751 9. Added ${quote_local_part.
1753 10. MIME decoding is now applied to the contents of Subject: header lines when
1756 11. Now that a reference to $sender_host_address automatically causes a reverse
1757 lookup to occur if necessary (4.13/18), there is no need to arrange for a
1758 host lookup before query-style lookups in lists that might use this
1759 variable. This has therefore been abolished, and the "net-" prefix is no
1760 longer necessary for query-style lookups.
1762 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
1763 have been a typo for LFLAGS, so it has been changed.
1765 13. The install script calls Exim with "-C /dev/null" in order to find the
1766 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
1767 to be output. Howeve, since Exim outputs its version number before the
1768 error, it didn't break the script. It just looked ugly. I fixed this by
1769 always allowing "-C /dev/null" if the caller is root.
1771 14. Ignore overlarge ACL variable number when reading spool file - insurance
1772 against a later release with more variables having written the file.
1774 15. The standard form for an IPv6 address literal was being rejected by EHLO.
1775 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1776 this, as well as the form without the "IPv6" on the front.
1778 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
1779 OS/Makefile-Darwin file.
1781 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
1782 only to LDAP libraries that do not have LDAP_OPT_DEREF.
1784 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
1785 variable. However, some OS use ints for inodes. I've added cast to long int
1786 to get rid of the compiler warning.
1788 19. I had forgotten to lock out "/../" in configuration file names when
1789 ALT_CONFIG_PREFIX was set.
1791 20. Routers used for verification do not need to specify transports. However,
1792 if such a router generated a host list, and callout was configured, Exim
1793 crashed, because it could not find a port number from the (non-existent)
1794 transport. It now assumes port 25 in this circumstance.
1796 21. Added the -t option to exigrep.
1798 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
1799 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
1800 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
1801 them is set, LOOKUP_LSEARCH is forced.
1803 23. "exim -bV" now outputs a list of lookups that are included in the binary.
1805 24. Added sender and host information to the "rejected by local_scan()" log
1806 line; previously there was no indication of these.
1808 25. Added .include_if_exists.
1810 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
1811 Linux. It turns out that not all file systems support this. Apparently some
1812 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
1813 do it.) To cope with this, the error EINVAL, which means that sync-ing is
1814 not supported on the file descriptor, is now ignored when Exim is trying to
1815 sync a directory. This applies only to Linux.
1817 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
1819 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
1820 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
1823 29. Added support for maildirsize files from supplied patch (modified a bit).
1825 30. The use of :fail: followed by an empty string could lead Exim to respond to
1826 sender verification failures with (e.g.):
1828 550 Verification failed for <xxx>
1829 550 Sender verify failed
1831 where the first response line was missing the '-' that indicates it is not
1832 the final line of the response.
1834 31. The loop for finding the name of the user that called Exim had a hardwired
1835 limit of 10; it now uses the value of finduser_retries, which is used for
1836 all other user lookups.
1838 32. Added $received_count variable, available in data and not_smtp ACLs, and at
1841 33. Exim was neglecting to zero errno before one call of strtol() when
1842 expanding a string and expecting an integer value. On some systems this
1843 resulted in spurious "integer overflow" errors. Also, it was casting the
1844 result into an int without checking.
1846 34. Testing for a connection timeout using "timeout_connect" in the retry rules
1847 did not work. The code looks as if it has *never* worked, though it appears
1848 to have been documented since at least releast 1.62. I have made it work.
1850 35. The "timeout_DNS" error in retry rules, also documented since at least
1851 1.62, also never worked. As it isn't clear exactly what this means, and
1852 clearly it isn't a major issue, I have abolished the feature by treating it
1853 as "timeout", and writing a warning to the main and panic logs.
1855 36. The display of retry rules for -brt wasn't always showing the error code
1858 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
1859 timeout_connect_A, timeout_connect_MX.
1861 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
1862 to the empty sender.
1864 39. The daemon was not analysing the content of -oX till after it had closed
1865 stderr and disconnected from the controlling terminal. This meant that any
1866 syntax errors were only noted on the panic log, and the return code from
1867 the command was 0. By re-arranging the code a little, I've made the
1868 decoding happen first, so such errors now appear on stderr, and the return
1869 code is 1. However, the actual setting up of the sockets still happens in
1870 the disconnected process, so errors there are still only recorded on the
1873 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
1874 connections (as happens on some IP stacks) was logged at start up time as
1875 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
1876 it from "IPv6 and IPv4", which means that two separate sockets are being
1879 41. The debug output for gethostbyname2() or getipnodebyname() failures now
1880 says whether AF_INET or AF_INET6 was passed as an argument.
1882 42. Exiwhat output was messed up when time zones were included in log
1885 43. Exiwhat now gives more information about the daemon's listening ports,
1886 and whether -tls-on-connect was used.
1888 44. The "port" option of the smtp transport is now expanded.
1890 45. A "message" modifier in a "warn" statement in a non-message ACL was being
1891 silently ignored. Now an error message is written to the main and panic
1894 46. There's a new ACL modifier called "logwrite" which writes to a log file
1895 as soon as it is encountered.
1897 47. Added $local_user_uid and $local_user_gid at routing time.
1899 48. Exim crashed when trying to verify a sender address that was being
1902 49. Exim was recognizing only a space character after ".include". It now also
1903 recognizes a tab character.
1905 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
1906 extracting the relevant information from the specification. The man page no
1907 longer contains scrambled data for the -d option, and I've added a section
1908 at the front about calling Exim under different names.
1910 51. Added "extra_headers" argument to the "mail" command in filter files.
1912 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
1915 53. Installed eximstats 1.29.
1917 54. Added transport_filter_timeout as a generic transport option.
1919 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
1920 Cc: header lines. This was required by RFC 822, but it not required by RFC
1923 56. Exim used to add From:, Date:, and Message-Id: header lines to any
1924 incoming messages that did not have them. Now it does so only if the
1925 message originates locally, that is, if there is no associated remote host
1926 address. When Resent- header lines are present, this applies to the Resent-
1927 lines rather than the non-Resent- lines.
1929 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
1930 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
1932 58. Messages for configuration errors now include the name of the main
1933 configuration file - useful now that there may be more than one file in a
1934 list (.included file names were always shown).
1936 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
1937 for those rare installations that do not start the daemon as root or run it
1938 setuid root. I've cut out the call to initgroups() if the daemon is not
1941 60. The Exim user and group can now be bound into the binary as text strings
1942 that are looked up at the start of Exim's processing.
1944 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
1946 62. Added $mailstore_basename variable.
1948 63. Installed patch to sieve.c from Michael Haardt.
1950 64. When Exim failed to open the panic log after failing to open the main log,
1951 the original message it was trying to log was written to stderr and debug
1952 output, but if they were not available (the usual case in production), it
1953 was lost. Now it is written to syslog before the two lines that record the
1954 failures to open the logs.
1956 65. Users' Exim filters run in subprocesses under the user's uid. It is
1957 possible for a "deliver" command or an alias in a "personal" command to
1958 provoke an address rewrite. If logging of address rewriting is configured,
1959 this fails because the process is not running as root or exim. There may be
1960 a better way of dealing with this, but for the moment (because 4.30 needs
1961 to be released), I have disabled address rewrite logging when running a
1962 filter in a non-root, non-exim process.
1968 1. The buildconfig auxiliary program wasn't quoting the value set for
1969 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
1970 not defined. This bug was masked in 4.22 by the effect that was fixed in
1973 2. Some messages that were rejected after a message id was allocated were
1974 shown as "incomplete" by exigrep. It no longer does this for messages that
1975 are rejected by local_scan() or the DATA or non-SMTP ACLs.
1977 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
1978 have allow_domain_literals set, the ID did not get logged in the <= line.
1979 Domain literals are now always recognized in Message-ID: header lines.
1981 4. The first argument for a ${extract expansion item is the key name or field
1982 number. Leading and trailing spaces in this item were not being ignored,
1983 causing some misleading effects.
1985 5. When deliver_drop_privilege was set, single queue runner processes started
1986 manually (i.e. by the command "exim -q") or by the daemon (which uses the
1987 same command in the process it spins off) were not dropping privilege.
1989 6. When the daemon running as "exim" started a queue runner, it always
1990 re-executed Exim in the spun-off process. This is a waste of effort when
1991 deliver_drop_privilege is set. The new process now just calls the
1992 queue-runner function directly.
1998 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2001 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2002 ignored. Though the use of -oP was forcing the writing of a pid file, it
2003 was always written to the default place.
2005 3. If the message "no IP address found for host xxxx" is generated during
2006 incoming verification, it is now followed by identification of the incoming
2007 connection (so you can more easily find what provoked it).
2009 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2011 5. Added some features to "harden" Exim a bit more against certain attacks:
2013 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2014 be put in Local/Makefile. This is like the never_users runtime option,
2015 but it cannot be overridden. The default setting is "root".
2017 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2018 prefix string with which any file named in a -C command line option
2021 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2022 is retained for -C and -D only if the caller of Exim is root. Without
2023 it, the exim user may also use -C and -D and retain privilege.
2025 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2026 command line option is disabled.
2028 6. Macro names set by the -D option must start with an upper case letter, just
2029 like macro names defined in the configuration file.
2031 7. Added "dereference=" facility to LDAP.
2033 8. Two instances of the typo "uknown" in the source files are fixed.
2035 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2036 the Configure-Makefile script screwed up while processing it.
2038 10. Incorporated PCRE 4.4.
2040 11. The SMTP synchronization check was not operating right at the start of an
2041 SMTP session. For example, it could not catch a HELO sent before the client
2042 waited for the greeting. There is now a check for outstanding input at the
2043 point when the greeting is written. Because of the duplex, asynchronous
2044 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2045 way, but not yet received, when the check is performed.
2047 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2048 on TCP/IP sockets, because this apparently causes some broken clients to
2051 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2052 unchanged) from the Cygwin maintainer.
2054 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
2055 was supported instead of testing for mbx. Effectively a typo.
2057 15. The spa authenticator server code was not checking that the input it
2058 received was valid base64.
2060 16. The debug output line for the "set" modifier in ACLs was not showing the
2061 name of the variable that was being set.
2063 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
2065 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
2066 lookup on its own. Something else was needed to trigger the lookup. For
2067 example, a match in host_lookup or the need for a host name in a host list.
2068 Now, if $sender_host_name is referenced and the host name has not yet been
2069 looked up, a lookup is performed. If the lookup fails, the variable remains
2070 empty, and $host_lookup_failed is set to "1".
2072 19. Added "eqi" as a case-independent comparison operator.
2074 20. The saslauthd authentication condition could segfault if neither service
2075 nor realm was specified.
2077 21. If an overflowing value such as "2048M" was set for message_size_limit, the
2078 error message that was logged was misleading, and incoming SMTP
2079 connections were dropped. The message is now more accurate, and temporary
2080 errors are given to SMTP connections.
2082 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
2083 (except RSET) with a 421 error, until QUIT is received. However, it was
2084 failing to send a response to QUIT.
2086 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
2087 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2088 ACL is now run after the helo_try_verify_hosts code.
2090 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2091 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2092 case-independent, so other case variants are also recognized). Apparently
2093 some systems use these upper case variants.
2095 25. If more than two messages were waiting for the same host, and a transport
2096 filter was specified for the transport, Exim sent two messages over the
2097 same TCP/IP connection, and then failed with "socket operation on non-
2098 socket" when it tried to send the third.
2100 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
2102 27. The extern definition of crypt16() in expand.c was not being excluded when
2103 the OS had its own crypt16() function.
2105 28. Added bounce_return_body as a new option, and bounce_return_size_limit
2106 as a preferred synonym for return_size_limit, both as an option and as an
2109 29. Added LIBS=-liconv to OS/Makefile-OSF1.
2111 30. Changed the default configuration ACL to relax the local part checking rule
2112 for addresses that are not in any local domains. For these addresses,
2113 slashes and pipe symbols are allowed within local parts, but the sequence
2114 /../ is explicitly forbidden.
2116 31. SPA server authentication was not clearing the challenge buffer before
2119 32. log_message in a "warn" ACL statement was writing to the reject log as
2120 well as to the main log, which contradicts the documentation and doesn't
2121 seem right (because no rejection is happening). So I have stopped it.
2123 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2124 However, I am unable to do any testing of this.
2126 34. Fixed an infelicity in the appendfile transport. When checking directories
2127 for a mailbox, to see if any needed to be created, it was accidentally
2128 using path names with one or more superfluous leading slashes; tracing
2129 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
2131 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2132 contents are added to the log line that is written for every discarded
2133 recipient. (Previously a log_message setting was ignored.)
2135 36. The ${quote: operator now quotes the string if it is empty.
2137 37. The install script runs exim in order to find its version number. If for
2138 some reason other than non-existence or emptiness, which it checks, it
2139 could not run './exim', it was installing it with an empty version number,
2140 i.e. as "exim-". This error state is now caught, and the installation is
2143 38. An argument was missing from the function that creates an error message
2144 when Exim fails to connect to the socket for saslauthd authentication.
2145 This could cause Exim to crash, or give a corrupted message.
2147 39. Added isip, isip4, and isip6 to ${if conditions.
2149 40. The ACL variables $acl_xx are now saved with the message, and can be
2150 accessed later in routers, transports, and filters.
2152 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
2153 strings in the file are not string-expanded.
2155 42. If a MAIL command specified a SIZE value that was too large to fit into an
2156 int variable, the check against message_size_limit failed. Such values are
2157 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2158 day this will have to be increased, but I don't think I want to be around
2159 when emails are that large.
2166 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2167 iconv() is not standard in FreeBSD.
2169 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2170 IPv6 enabled. The observed symptom was a segmentation fault on return from
2171 the function os_common_find_running_interfaces() in src/os.c.
2173 3. In the check_special_case() function in daemon.c I had used "errno" as an
2174 argument name, which causes warnings on some systems. This was basically a
2175 typo, since it was named "eno" in the comments!
2177 4. The code that waits for the clock to tick (at a resolution of some fraction
2178 of a second) so as to ensure message-id uniqueness was always waiting for
2179 at least one whole tick, when it could have waited for less. [This is
2180 almost certainly not relevant at current processor speeds, where it is
2181 unlikely to ever wait at all. But we try to future-proof.]
2183 5. The function that sleeps for a time interval that includes fractions of a
2184 second contained a race. It did not block SIGALRM between setting the
2185 timer, and suspending (a couple of lines later). If the interval was short
2186 and the sigsuspend() was delayed until after it had expired, the suspension
2187 never ended. On busy systems this could lead to processes getting stuck for
2190 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2191 process, before it forks any delivery processes. The open lookup caching
2192 mechanism meant that the open file or database connection was passed into
2193 the delivery process. The problem was that delivery processes always tidy
2194 up cached lookup data. This could cause a problem for the next delivery
2195 process started by the queue runner, because the external queue runner
2196 process does not know about the closure. So the next delivery process
2197 still has data in the lookup cache. In the case of a file lookup, there was
2198 no problem because closing a file descriptor in a subprocess doesn't affect
2199 the parent. However, if the lookup was caching a connection to a database,
2200 the connection was closed, and the second delivery process was likely to
2201 see errors such as "PGSQL: query failed: server closed the connection
2202 unexpectedly". The problem has been fixed by closing all cached lookups
2203 in a queue runner before running a delivery process.
2205 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2206 seem to have the "const" qualifier which it has on other OS. I've
2209 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2210 *of the same type* (client or server) with the same public name that an
2211 error should be diagnosed.
2213 9. When Exim looked up a host name for an IP address, but failed to find the
2214 original IP address when looking up the host name (a safety check), it
2215 output the message "<ip address> does not match any IP for NULL", which was
2216 confusing, to say the least. The bug was that the host name should have
2217 appeared instead of "NULL".
2219 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
2220 user that is built into the binary, and the -C or -D options is used, root
2221 privilege is dropped before the configuration file is read. In addition,
2222 logging is switched to stderr instead of the normal log files. If the
2223 configuration then re-defines the Exim user, the unprivileged environment
2224 is probably not what is expected, so Exim logs a panic warning message (but
2227 However, if deliver_drop_privilege is set, the unprivileged state may well
2228 be exactly what is intended, so the warning has been cut out in that case,
2229 and Exim is allowed to try to write to its normal log files.
2235 1. smtp_return_error_details was not giving details for temporary sender
2236 or receiver verification errors.
2238 2. Diagnose a configuration error if two authenticators have the same public
2241 3. Exim used not to create the message log file for a message until the first
2242 delivery attempt. This could be confusing when incoming messages were held
2243 for policy or load reasons. The message log file is now created at the time
2244 the message is received, and an initial "Received" line is written to it.
2246 4. The automatically generated man page for command line options had a minor
2247 bug that caused no ill effects; however, a more serious problem was that
2248 the procedure for building the man page automatically didn't always
2249 operate. Consequently, release 4.20 contains an out-of-date version. This
2250 shouldn't happen again.
2252 5. When building Exim with embedded Perl support, the script that builds the
2253 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2254 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2256 6. The freeze_tell option was not being used for messages that were frozen on
2257 arrival, either by an ACL or by local_scan().
2259 7. Added the smtp_incomplete_transaction log selector.
2261 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2262 was accepting AUTH without a new EHLO.
2264 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2265 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2268 10. Logging of TCP/IP connections (when configured) now happens in the main
2269 daemon process instead of the child process, so that the TCP/IP connection
2270 count is more accurate (but it can never be perfect).
2272 11. The use of "drop" in a nested ACL was not being handled correctly in the
2273 outer ACL. Now, if condition failure induced by the nested "drop" causes
2274 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2275 or "require"), the connection is dropped.
2277 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2278 that yield "discard" can now be used with an "accept" or a "discard" verb,
2279 but an error is generated for any others (because I can't see a useful way
2280 to define what should happen).
2282 13. When an ACL is read dynamically from a file (or anywhere else), the lines
2283 are now processed in the same way as lines in the Exim configuration file.
2284 In particular, continuation lines are supported.
2286 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
2288 15. Added -ti meaning -t -i.
2290 16. Check for letters, digits, hyphens, and dots in the names of dnslist
2291 domains, and warn by logging if others are found.
2293 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
2294 returned from GIFCONF when Exim is trying to find the list of interfaces on
2295 a host. The code in os.c has been modified to copy each ifreq to an aligned
2296 structure in all cases.
2298 Also, in some cases, the returned ifreq's were being copied to a 'struct
2299 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2300 means the last couple of bytes of an IPv6 address could be chopped if the
2301 ifreq contained only a normal sockaddr (14 bytes storage).
2303 18. Named domain lists were not supported in the hosts_treat_as_local option.
2304 An entry such as +xxxx was not recognized, and was treated as a literal
2307 19. Ensure that header lines added by a DATA ACL are included in the reject log
2308 if the ACL subsequently rejects the message.
2310 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
2311 MD5 (which is deprecated).
2313 21. When testing a filter file using -bf, Exim was writing a message when it
2314 took the sender from a "From " line in the message, but it was not doing so
2315 when it took $return_path from a Return-Path: header line. It now does.
2317 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2318 with a valid header line field name (a series of printing characters
2319 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
2321 23. Changed "disc" in the source to "disk" to conform to the documentation and
2322 the book and for uniformity.
2324 24. Ignore Sendmail's -Ooption=value command line item.
2326 25. When execve() failed while trying to run a command in a pipe transport,
2327 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2328 could be confused with a return value of 69 from the command itself. This
2329 has been changed to 127, the value the shell returns if it is asked to run
2330 a non-existent command. The wording for the related log line suggests a
2331 non-existent command as the problem.
2333 26. If received_header_text expands to an empty string, do not add a Received:
2334 header line to the message. (Well, it adds a token one on the spool, but
2335 marks it "old" so that it doesn't get used or transmitted.)
2337 27. Installed eximstats 1.28 (addition of -nt option).
2339 28. There was no check for failure on the call to getsockname() in the daemon
2340 code. This can fail if there is a shortage of resources on the system, with
2341 ENOMEM, for example. A temporary error is now given on failure.
2343 29. Contrary to the C standard, it seems that in some environments, the
2344 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2345 program. Exim now does this explicitly; it affects the formatting of
2346 timestamps using strftime().
2348 30. If exiqsumm was given junk data, it threw up some uninitialized variable
2349 complaints. I've now initialized all the variables, to avoid this.
2351 32. Header lines added by a system filter were not being "seen" during
2352 transport-time rewrites.
2354 33. The info_callback() function passed to OpenSSL is set up with type void
2355 (*)(SSL *, int, int), as described somewhere. However, when calling the
2356 function (actually a macro) that sets it up, the type void(*)() is
2357 expected. I've put in a cast to prevent warnings from picky compilers.
2359 34. If a DNS black list lookup found a CNAME record, but there were no A
2360 records associated with the domain it pointed at, Exim crashed.
2362 35. If a DNS black list lookup returned more than one A record, Exim ignored
2363 all but the first. It now scans all returned addresses if a particular IP
2364 value is being sought. In this situation, the contents of the
2365 $dnslist_value variable are a list of all the addresses, separated by a
2368 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
2369 to accept a host name and all its aliases if the forward lookup for any of
2370 them yielded the IP address of the incoming connection. Now it accepts only
2371 those names whose forward lookup yields the correct IP address. Any other
2372 names are discarded. This closes a loophole whereby a rogue DNS
2373 administrator could create reverse DNS records to break through a
2374 wildcarded host restriction in an ACL.
2376 37. If a user filter or a system filter that ran in a subprocess used any of
2377 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2378 the wrong values were passed to the pipe command ($thisaddress had the
2379 value of $0, $0 had the value of $1, etc). This bug was introduced by
2380 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
2382 38. Improved the line breaking for long SMTP error messages from ACLs.
2383 Previously, if there was no break point between 40 and 75 characters, Exim
2384 left the rest of the message alone. Two changes have been made: (a) I've
2385 reduced the minimum length to 35 characters; (b) if it can't find a break
2386 point between 35 and 75 characters, it looks ahead and uses the first one
2387 that it finds. This may give the occasional overlong line, but at least the
2388 remaining text gets split now.
2390 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2391 file descriptors might be low, and that setting 1000 would always raise it.
2392 It turns out that in some environments, the limit is already over 1000 and
2393 that lowering it causes trouble. So now Exim takes care not to decrease it.
2395 40. When delivering a message, the value of $return_path is set to $sender_
2396 address at the start of routing (routers may change the value). By an
2397 oversight, this default was not being set up when an address was tested by
2398 -bt or -bv, which affected the outcome if any router or filter referred to
2401 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
2402 log only when "message" or "log_message" are set. However, if one of the
2403 conditions was an address verification, or a call to a nested ACL, the
2404 messages generated by the underlying test were being passed through. This
2405 no longer happens. The underlying message is available in $acl_verify_
2406 message for both "message" and "log_message" expansions, so it can be
2407 passed through if needed.
2409 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2410 new expansion $bh_ to give the encoded byte string without charset
2411 translation. Translation happens only if iconv() is available; HAVE_ICONV
2412 indicates this at build time. HEADERS_CHARSET gives the charset to
2413 translate to; headers_charset can change it in the configuration, and
2414 "headers charset" can change it in an individual filter file.
2416 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
2417 that creates RFC 2047 encoded "words" labels them as that charset instead
2418 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2419 expansion operator; (ii) when Exim creates a From: line for a local
2420 message; (iii) when a header line is rewritten to include a "phrase" part.
2422 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2423 buggy, causing it to skip the first lines of messages whose message ID
2424 ended in 'D'. This would not have bitten before Exim release 4.14, because
2425 message IDs were unlikely to end in 'D' before then. The effect was to have
2426 incorrect size information for certain domains.
2428 45. #include "config.h" was missing at the start of the crypt16.c module. This
2429 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2432 46. If there was a timeout during a "random" callout check, Exim treated it as
2433 a failure of the random address, and carried on sending RSET and the real
2434 address. If the delay was just some slowness somewhere, the response to the
2435 original RCPT would be taken as a response to RSET and so on, causing
2436 mayhem of various kinds.
2438 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2439 when I implemented it. It didn't allow for the fact that some option values
2440 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2441 the right test for positive values.
2443 48. Domain names in DNS records are case-independent. Exim always looks them up
2444 in lower case. Some resolvers return domain names in exactly the case they
2445 appear in the zone file, that is, they may contain uppercase letters. Not
2446 all resolvers do this - some return always lower case. Exim was treating a
2447 change of case by a resolver as a change of domain, similar to a widening
2448 of a domain abbreviation. This triggered its re-routing code and so it was
2449 trying to route what was effectively the same domain again. This normally
2450 caused routing to fail (because the router wouldn't handle the domain
2451 twice). Now Exim checks for this case specially, and just changes the
2452 casing of the domain that it ultimately uses when it transmits the message
2455 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2458 50. If a filter generated a file delivery with a non-absolute name (possible if
2459 no home directory exists for the router), the forbid_file option was not
2462 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
2463 the existing equality matching.
2465 52. Exim was using ints instead of ino_t variables in some places where it was
2466 dealing with inode numbers.
2468 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2469 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2470 called TMPDIR, and if it finds it is different, it changes its value.
2472 54. The smtp_printf() function is now made available to local_scan() so
2473 additional output lines can be written before returning. There is also an
2474 smtp_fflush() function to enable the detection of a dropped connection.
2475 The variables smtp_input and smtp_batched_input are exported to
2478 55. Changed the default runtime configuration: the message "Unknown user"
2479 has been removed from the ACL, and instead placed on the localuser router,
2480 using the cannot_route_message feature. This means that any verification
2481 failures that generate their own messages won't get overridden. Similarly,
2482 the "Unrouteable address" message that was in the ACL for unverifiable
2483 relay addresses has also been removed.
2485 56. Added hosts_avoid_esmtp to the smtp transport.
2487 57. The exicyclog script was not checking for the esoteric option
2488 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2489 will work only if exicyclog is run under the appropriate euid.
2491 58. Following a discussion on the list, the rules by which Exim recognises line
2492 endings on incoming messages have been changed. The -dropcr and drop_cr
2493 options are now no-ops, retained only for backwards compatibility. The
2494 following line terminators are recognized: LF CRLF CR. However, special
2495 processing applies to CR:
2497 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
2498 nor a local message in the state where . is a terminator.
2500 (ii) If a bare CR is encountered in a header line, an extra space is added
2501 after the line terminator so as not to end the header. The reasoning
2502 behind this is that bare CRs in header lines are most likely either
2503 to be mistakes, or people trying to play silly games.
2505 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
2506 was being incorrectly given as 18 bytes larger than it should have been.
2507 This is a VOB (very old bug).
2509 60. This may never have affected anything current, but just in case it has:
2510 When the local host is found other than at the start of a list of hosts,
2511 the local host, those with the same MX, and any that follow, are discarded.
2512 When the list in question was part of a longer list of hosts, the following
2513 hosts (not currently being processed) were also being discarded. This no
2514 longer happens. I'm not sure if this situation could ever has previously
2517 61. Added the "/MX" feature to lists of hosts in the manualroute and query
2520 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
2521 header. This is something that is recommended in a new Internet Draft, and
2522 is something that is documented as being done by Sendmail. There are two
2523 possible values. For messages generated by the autoreply transport, Exim
2526 Auto-Submitted: auto-replied
2528 whereas for all other generated messages (e.g. bounces) it adds
2530 Auto-Submitted: auto-generated
2532 63. The "personal" condition in filters now includes a test for the
2533 Auto-Submitted: header. If it contains the string "auto-" the message it
2534 not considered personal.
2536 64. Added rcpt_include_affixes as a generic transport option.
2538 65. Added queue_only_override (default true).
2540 66. Added the syslog_duplication option.
2542 67. If what should have been the first header line of a message consisted of
2543 a space followed by a colon, Exim was mis-interpreting it as a header line.
2544 It isn't of course - it is syntactically invalid and should therefore be
2545 treated as the start of the message body. The misbehaviour could have
2546 caused a number of strange effects, including loss of data in subsequent
2547 header lines, and spool format errors.
2549 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
2550 client host had authenticated. This control can now be exercised by an ACL
2551 for more flexibility.
2553 69. By default, callouts do not happen when testing with -bh. There is now a
2554 variant, -bhc, which does actually run the callout code, including
2555 consulting and updating the callout cache.
2557 70. Added support for saslauthd authentication, courtesy of Alexander
2560 71. If statvfs() failed on the spool or log directories while checking their
2561 size for availability, Exim confusingly gave the error "space shortage".
2562 Furthermore, in debugging mode it crashed with a floating point exception.
2563 These checks are done if check_{spool,log}_{space,inodes} are set, and when
2564 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
2565 serious problem, Exim now writes to the main and panic logs when this
2566 happens, with details of the failure. It then refuses to accept the
2567 incoming message, giving the message "spool directory problem" or "log
2568 directory problem" with a 421 code for SMTP messages.
2570 72. When Exim is about to re-exec itself, it ensures that the file descriptors
2571 0, 1, and 2 exist, because some OS complain for execs without them (see
2572 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
2573 descriptors. However, the code omitted to check that the open succeeded,
2574 causing mysterious errors if for some reason the permissions on /dev/null
2575 got screwed. Now Exim writes a message to the main and panic logs, and
2576 bombs out if it can't open /dev/null.
2578 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
2579 interact so that it is all more flexible. It is supposed to remain
2580 backwards compatible. Also added extra_local_interfaces.
2582 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
2583 to bomb out with an assertion failure - to the client this appears as a
2584 connection drop. This problem occurs in the part of the code that was taken
2585 from the Samba project. Fortunately, the assertion is in a very simple
2586 function, so I have fixed this by reproducing the function inline in the
2587 one place where it is called, and arranging for authentication to fail
2588 instead of killing the process with assert().
2590 75. The SPA client code was not working when the server requested OEM rather
2591 than Unicode encoding.
2593 76. Added code to make require_files with a specific uid setting more usable in
2594 the case where statting the file as root fails - usually a non-root-mounted
2595 NFS file system. When this happens and the failure is EACCES, Exim now
2596 forks a subprocess and does the per-uid checking as the relevant uid.
2598 77. Added process_log_path.
2600 78. If log_file_path was not explicitly set, a setting of check_log_space or
2601 check_log_inodes was ignored.
2603 79. If a space check for the spool or log partitions fails, the incident is now
2604 logged. Of course, in the latter case the data may get lost...
2606 80. Added the %p formatting code to string_format() so that it can be used to
2607 print addresses in debug_print(). Adjusted all the address printing in the
2608 debugging in store.c to use %p rather than %d.
2610 81. There was a concern that a line of code in smtp_in.c could overflow a
2611 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
2612 initially expressed, the concern was not well-founded, because trailing
2613 spaces are removed early. However, if the trailing spaces were followed by
2614 a NULL, they did not get removed, so the overflow was possible. Two fixes
2617 (a) I re-wrote the offending code in a cleaner fashion.
2618 (b) If an incoming SMTP command contains a NULL character, it is rejected
2621 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
2622 runs initgroups(), so that if the Exim user is in any additional groups,
2623 they will be used during message reception.
2629 The change log for 4.20 and earlier releases has been archived.
git://git.exim.org / exim.git / blob