3 # $Cambridge: exim/test/runtest,v 1.7 2006/04/20 14:11:29 ph10 Exp $
5 ###############################################################################
6 # This is the controlling script for the "new" test suite for Exim. It should #
7 # be possible to export this suite for running on a wide variety of hosts, in #
8 # contrast to the old suite, which was very dependent on the environment of #
9 # Philip Hazel's desktop computer. This implementation inspects the version #
10 # of Exim that it finds, and tests only those features that are included. The #
11 # surrounding environment is also tested to discover what is available. See #
12 # the README file for details of how it all works. #
14 # Implementation started: 03 August 2005 by Philip Hazel #
15 # Placed in the Exim CVS: 06 February 2006 #
16 ###############################################################################
24 # Start by initializing some global variables
26 $testversion = "4.62 (20-Apr-06)";
42 $test_end = $test_top = 8999;
43 $test_special_top = 9999;
48 # Networks to use for DNS tests. We need to choose some networks that will
49 # never be used so that there is no chance that the host on which we are
50 # running is actually in one of the test networks. Private networks such as
51 # the IPv4 10.0.0.0/8 network are no good because hosts may well use them.
52 # Rather than use some unassigned numbers (that might become assigned later),
53 # I have chosen some multicast networks, in the belief that such addresses
54 # won't ever be assigned to hosts. This is the only place where these numbers
55 # are defined, so it is trivially possible to change them should that ever
58 $parm_ipv4_test_net = "224";
59 $parm_ipv6_test_net = "ff00";
61 # Port numbers are currently hard-wired
63 $parm_port_n = 1223; # Nothing listening on this port
64 $parm_port_s = 1224; # Used for the "server" command
65 $parm_port_d = 1225; # Used for the Exim daemon
66 $parm_port_d2 = 1226; # Additional for daemon
67 $parm_port_d3 = 1227; # Additional for daemon
68 $parm_port_d4 = 1228; # Additional for daemon
72 ###############################################################################
73 ###############################################################################
75 # Define a number of subroutines
77 ###############################################################################
78 ###############################################################################
81 ##################################################
83 ##################################################
85 sub pipehandler { $sigpipehappened = 1; }
87 sub inthandler { print "\n"; tests_exit(-1, "Caught SIGINT"); }
90 ##################################################
91 # Do global macro substitutions #
92 ##################################################
94 # This function is applied to configurations, command lines and data lines in
95 # scripts, and to lines in the files of the aux-var-src and the dnszones-src
96 # directory. It takes one argument: the current test number, or zero when
97 # setting up files before running any tests.
100 s?\bCALLER\b?$parm_caller?g;
101 s?\bCALLER_UID\b?$parm_caller_uid?g;
102 s?\bCALLER_GID\b?$parm_caller_gid?g;
103 s?\bCLAMSOCKET\b?$parm_clamsocket?g;
104 s?\bDIR/?$parm_cwd/?g;
105 s?\bEXIMGROUP\b?$parm_eximgroup?g;
106 s?\bEXIMUSER\b?$parm_eximuser?g;
107 s?\bHOSTIPV4\b?$parm_ipv4?g;
108 s?\bHOSTIPV6\b?$parm_ipv6?g;
109 s?\bHOSTNAME\b?$parm_hostname?g;
110 s?\bPORT_D\b?$parm_port_d?g;
111 s?\bPORT_D2\b?$parm_port_d2?g;
112 s?\bPORT_D3\b?$parm_port_d3?g;
113 s?\bPORT_D4\b?$parm_port_d4?g;
114 s?\bPORT_N\b?$parm_port_n?g;
115 s?\bPORT_S\b?$parm_port_s?g;
116 s?\bTESTNUM\b?$_[0]?g;
117 s?(\b|_)V4NET([\._])?$1$parm_ipv4_test_net$2?g;
118 s?\bV6NET:?$parm_ipv6_test_net:?g;
123 ##################################################
124 # Subroutine to tidy up and exit #
125 ##################################################
127 # In all cases, we check for any Exim daemons that have been left running, and
128 # kill them. Then remove all the spool data, test output, and the modified Exim
129 # binary if we are ending normally.
132 # $_[0] = 0 for a normal exit; full cleanup done
133 # $_[0] > 0 for an error exit; no files cleaned up
134 # $_[0] < 0 for a "die" exit; $_[1] contains a message
140 # Search for daemon pid files and kill the daemons. We kill with SIGINT rather
141 # than SIGTERM to stop it outputting "Terminated" to the terminal when not in
144 if (opendir(DIR, "spool"))
146 my(@spools) = sort readdir(DIR);
148 foreach $spool (@spools)
150 next if $spool !~ /^exim-daemon./;
151 open(PID, "spool/$spool") || die "** Failed to open \"spool/$spool\": $!\n";
154 print "Tidyup: killing daemon pid=$pid\n";
155 system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
159 { die "** Failed to opendir(\"spool\"): $!\n" unless $!{ENOENT}; }
161 # Close the terminal input and remove the test files if all went well, unless
162 # the option to save them is set. Always remove the patched Exim binary. Then
163 # exit normally, or die.
166 system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
167 if ($rc == 0 && !$save_output);
169 system("sudo /bin/rm -rf ./eximdir/*");
170 exit $rc if ($rc >= 0);
171 die "** runtest error: $_[1]\n";
176 ##################################################
177 # Subroutines used by the munging subroutine #
178 ##################################################
180 # This function is used for things like message ids, where we want to generate
181 # more than one value, but keep a consistent mapping throughout.
184 # $oldid the value from the file
185 # $base a base string into which we insert a sequence
186 # $sequence the address of the current sequence counter
189 my($oldid, $base, $sequence) = @_;
190 my($newid) = $cache{$oldid};
191 if (! defined $newid)
193 $newid = sprintf($base, $$sequence++);
194 $cache{$oldid} = $newid;
200 # This is used while munging the output from exim_dumpdb. We cheat by assuming
201 # that the date always the same, and just return the number of seconds since
205 my($day,$month,$year,$hour,$min,$sec) =
206 $_[0] =~ /^(\d\d)-(\w\w\w)-(\d{4})\s(\d\d):(\d\d):(\d\d)/;
207 return $hour * 60 * 60 + $min * 60 + $sec;
211 # This is a subroutine to sort maildir files into time-order. The second field
212 # is the microsecond field, and may vary in length, so must be compared
216 return $a cmp $b if ($a !~ /^\d+\.H\d/ || $b !~ /^\d+\.H\d/);
217 my($x1,$y1) = $a =~ /^(\d+)\.H(\d+)/;
218 my($x2,$y2) = $b =~ /^(\d+)\.H(\d+)/;
219 return ($x1 != $x2)? ($x1 <=> $x2) : ($y1 <=> $y2);
224 ##################################################
225 # Subroutine list files below a directory #
226 ##################################################
228 # This is used to build up a list of expected mail files below a certain path
229 # in the directory tree. It has to be recursive in order to deal with multiple
232 sub list_files_below {
237 opendir(DIR, $dir) || tests_exit(-1, "Failed to open $dir: $!");
238 @sublist = sort maildirsort readdir(DIR);
241 foreach $file (@sublist)
243 next if $file eq "." || $file eq ".." || $file eq "CVS";
245 { @yield = (@yield, list_files_below("$dir/$file")); }
247 { push @yield, "$dir/$file"; }
255 ##################################################
256 # Munge a file before comparing #
257 ##################################################
259 # The pre-processing turns all dates, times, Exim versions, message ids, and so
260 # on into standard values, so that the compare works. Perl's substitution with
261 # an expression provides a neat way to do some of these changes.
263 # We keep a global associative array for repeatedly turning the same values
264 # into the same standard values throughout the data from a single test.
265 # Message ids get this treatment (can't be made reliable for times), and
266 # times in dumped retry databases are also handled in a special way, as are
267 # incoming port numbers.
269 # On entry to the subroutine, the file to write to is already opened with the
270 # name MUNGED. The input file name is the only argument to the subroutine.
271 # Certain actions are taken only when the name contains "stderr", "stdout",
272 # or "log". The yield of the function is 1 if a line matching "*** truncated
273 # ***" is encountered; otherwise it is 0.
280 open(IN, "$file") || tests_exit(-1, "Failed to open $file: $!");
282 my($is_log) = $file =~ /log/;
283 my($is_stdout) = $file =~ /stdout/;
284 my($is_stderr) = $file =~ /stderr/;
288 $date = "\\d{2}-\\w{3}-\\d{4}\\s\\d{2}:\\d{2}:\\d{2}";
290 # Pattern for matching pids at start of stderr lines; initially something
293 $spid = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx";
295 # Scan the file and make the changes. Near the bottom there are some changes
296 # that are specific to certain file types, though there are also some of those
301 # Check for "*** truncated ***"
302 $yield = 1 if /\*\*\* truncated \*\*\*/;
304 # Replace the name of this host
305 s/\Q$parm_hostname\E/the.local.host.name/g;
307 # But convert "name=the.local.host address=127.0.0.1" to use "localhost"
308 s/name=the\.local\.host address=127\.0\.0\.1/name=localhost address=127.0.0.1/g;
310 # Replace the path to the testsuite directory
311 s?\Q$parm_cwd\E?TESTSUITE?g;
313 # Replace the Exim version number (may appear in various places)
314 s/Exim \d+\.\d+[\w-]*/Exim x.yz/i;
316 # Replace Exim message ids by a unique series
317 s/((?:[^\W_]{6}-){2}[^\W_]{2})
318 /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
320 # The names of lock files appear in some error and debug messages
321 s/\.lock(\.[-\w]+)+(\.[\da-f]+){2}/.lock.test.ex.dddddddd.pppppppp/;
323 # Unless we are in an IPv6 test, replace IPv4 and/or IPv6 in "listening on
324 # port" message, because it is not always the same.
325 s/port (\d+) \([^)]+\)/port $1/g
326 if !$is_ipv6test && m/listening for SMTP(S?) on port/;
328 # Challenges in SPA authentication
329 s/TlRMTVNTUAACAAAAAAAAAAAoAAABgg[\w+\/]+/TlRMTVNTUAACAAAAAAAAAAAoAAABggAAAEbBRwqFwwIAAAAAAAAAAAAt1sgAAAAA/;
332 s?prvs=([^/]+)/[\da-f]{10}@?prvs=$1/xxxxxxxxxx@?g;
334 # Error lines on stdout from SSL contain process id values and file names.
335 # They also contain a source file name and line number, which may vary from
336 # release to release.
337 s/^\d+:error:/pppp:error:/;
338 s/:(?:\/[^\s:]+\/)?([^\/\s]+\.c):\d+:/:$1:dddd:/;
340 # One error test in expansions mentions base 62 or 36
341 s/is not a base (36|62) number/is not a base 36\/62 number/;
343 # This message sometimes has a different number of seconds
344 s/forced fail after \d seconds/forced fail after d seconds/;
346 # This message may contain a different DBM library name
347 s/Failed to open \S+( \([^\)]+\))? file/Failed to open DBM file/;
349 # The message for a non-listening FIFO varies
350 s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
352 # The name of the shell may vary
353 s/\s\Q$parm_shell\E\b/ SHELL/;
355 # Debugging output of lists of hosts may have different sort keys
356 s/sort=\S+/sort=xx/ if /^\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\S+/;
358 # Random local part in callout cache testing
359 s/myhost.test.ex-\d+-testing/myhost.test.ex-dddddddd-testing/;
362 # ======== Dumpdb output ========
363 # This must be before the general date/date munging.
364 # Time data lines, which look like this:
365 # 25-Aug-2000 12:11:37 25-Aug-2000 12:11:37 26-Aug-2000 12:11:37
366 if (/^($date)\s+($date)\s+($date)(\s+\*)?\s*$/)
368 my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
369 $expired = "" if !defined $expired;
370 my($increment) = date_seconds($date3) - date_seconds($date2);
372 # We used to use globally unique replacement values, but timing
373 # differences make this impossible. Just show the increment on the
376 printf MUNGED ("first failed = time last try = time2 next try = time2 + %s%s\n",
377 $increment, $expired);
381 # more_errno values in exim_dumpdb output which are times
382 s/T:(\S+)\s-22\s(\S+)\s/T:$1 -22 xxxx /;
385 # ======== Dates and times ========
387 # Dates and times are all turned into the same value - trying to turn
388 # them into different ones cannot be done repeatedly because they are
389 # real time stamps generated while running the test. The actual date and
390 # time used was fixed when I first started running automatic Exim tests.
392 # Date/time in header lines and SMTP responses
393 s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d\d\d\d\s\d\d\:\d\d:\d\d\s[-+]\d{4}
394 /Tue, 2 Mar 1999 09:44:33 +0000/gx;
396 # Date/time in logs and in one instance of a filter test
397 s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?/1999-03-02 09:44:33/gx;
398 s/^Logwrite\s"\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Logwrite "1999-03-02 09:44:33/gx;
400 # Date/time in message separators
401 s/(?:[A-Z][a-z]{2}\s){2}\d\d\s\d\d:\d\d:\d\d\s\d\d\d\d
402 /Tue Mar 02 09:44:33 1999/gx;
404 # Date of message arrival in spool file as shown by -Mvh
405 s/^\d{9,10}\s0$/ddddddddd 0/;
407 # Date/time in mbx mailbox files
408 s/\d\d-\w\w\w-\d\d\d\d\s\d\d:\d\d:\d\d\s[-+]\d\d\d\d,/06-Sep-1999 15:52:48 +0100,/gx;
410 # Dates/times in debugging output for writing retry records
411 if (/^ first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
414 $_ = " first failed=dddd last try=dddd next try=+$next $4\n";
416 s/^now=\d+ received_time=\d+ diff=\d+ timeout=(\d+)/now=tttt received_time=tttt diff=tttt timeout=$1/;
418 # Time to retry may vary
419 s/time to retry = \S+/time to retry = tttt/;
420 s/retry record exists: age=\S+/retry record exists: age=ttt/;
421 s/failing_interval=\S+ message_age=\S+/failing_interval=ttt message_age=ttt/;
423 # Date/time in exim -bV output
424 s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
427 # ======== Caller's login, uid, gid, home ========
429 s/\Q$parm_caller_home\E/CALLER_HOME/g; # NOTE: these must be done
430 s/\b\Q$parm_caller\E\b/CALLER/g; # in this order!
431 s/\b\Q$parm_caller_group\E\b/CALLER/g; # In case group name different
433 s/\beuid=$parm_caller_uid\b/euid=CALLER_UID/g;
434 s/\begid=$parm_caller_gid\b/egid=CALLER_GID/g;
436 s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
437 s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
439 # When looking at spool files with -Mvh, we will find not only the caller
440 # login, but also the uid and gid. It seems that $) in some Perls gives all
441 # the auxiliary gids as well, so don't bother checking for that.
443 s/^CALLER $> \d+$/CALLER UID GID/;
445 # There is one case where the caller's login is forced to something else,
446 # in order to test the processing of logins that contain spaces. Weird what
447 # some people do, isn't it?
449 s/^spaced user $> \d+$/CALLER UID GID/;
452 # ======== Exim's login ========
453 # For bounce messages, this will appear on the U= lines in logs and also
454 # after Received: and in addresses. In one pipe test it appears after
455 # "Running as:". It also appears in addresses, and in the names of lock
458 s/U=$parm_eximuser/U=EXIMUSER/;
459 s/user=$parm_eximuser/user=EXIMUSER/;
460 s/login=$parm_eximuser/login=EXIMUSER/;
461 s/Received: from $parm_eximuser /Received: from EXIMUSER /;
462 s/Running as: $parm_eximuser/Running as: EXIMUSER/;
463 s/\b$parm_eximuser@/EXIMUSER@/;
464 s/\b$parm_eximuser\.lock\./EXIMUSER.lock./;
466 s/\beuid=$parm_exim_uid\b/euid=EXIM_UID/g;
467 s/\begid=$parm_exim_gid\b/egid=EXIM_GID/g;
469 s/\buid=$parm_exim_uid\b/uid=EXIM_UID/g;
470 s/\bgid=$parm_exim_gid\b/gid=EXIM_GID/g;
473 # ======== General uids, gids, and pids ========
474 # Note: this must come after munges for caller's and exim's uid/gid
476 s/\bgid=\d+/gid=gggg/;
477 s/\begid=\d+/egid=gggg/;
478 s/\bpid=\d+/pid=pppp/;
479 s/\buid=\d+/uid=uuuu/;
480 s/\beuid=\d+/euid=uuuu/;
481 s/set_process_info:\s+\d+/set_process_info: pppp/;
482 s/queue run pid \d+/queue run pid ppppp/;
483 s/process \d+ running as transport filter/process pppp running as transport filter/;
484 s/process \d+ writing to transport filter/process pppp writing to transport filter/;
485 s/reading pipe for subprocess \d+/reading pipe for subprocess pppp/;
486 s/remote delivery process \d+ ended/remote delivery process pppp ended/;
488 # Pid in temp file in appendfile transport
489 s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
491 # Detect a daemon stderr line with a pid and save the pid for subsequent
492 # removal from following lines.
493 $spid = $1 if /^(\s*\d+) (?:listening|LOG: MAIN|(?:daemon_smtp_port|local_interfaces) overridden by)/;
496 # Queue runner waiting messages
497 s/waiting for children of \d+/waiting for children of pppp/;
498 s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
500 # ======== Port numbers ========
501 # Incoming port numbers may vary, but not in daemon startup line.
503 s/^Port: (\d+)/"Port: " . new_value($1, "%s", \$next_port)/e;
504 s/\(port=(\d+)/"(port=" . new_value($1, "%s", \$next_port)/e;
506 # This handles "connection from" and the like, when the port is given
507 if (!/listening for SMTP on/ && !/Connecting to/ && !/=>/ && !/\*>/ &&
508 !/Connection refused/)
510 s/\[([a-z\d:]+|\d+(?:\.\d+){3})\]:(\d+)/"[".$1."]:".new_value($2,"%s",\$next_port)/ie;
513 # Port in host address in spool file output from -Mvh
514 s/^-host_address (.*)\.\d+/-host_address $1.9999/;
517 # ======== Local IP addresses ========
518 # The amount of space between "host" and the address in verification output
519 # depends on the length of the host name. We therefore reduce it to one space
522 s/^\s+host\s(\S+)\s+(\S+)/ host $1 $2/;
523 s/^\s+(host\s\S+\s\S+)\s+(port=.*)/ host $1 $2/;
524 s/^\s+(host\s\S+\s\S+)\s+(?=MX=)/ $1 /;
525 s/host\s\Q$parm_ipv4\E\s\[\Q$parm_ipv4\E\]/host ipv4.ipv4.ipv4.ipv4 [ipv4.ipv4.ipv4.ipv4]/;
526 s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
527 s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
528 s/\b\Q$parm_ipv6\E\b/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
531 # ======== Test network IP addresses ========
532 s/(\b|_)\Q$parm_ipv4_test_net\E(?=\.\d+\.\d+\.\d+\b|_|\.rbl|\.in-addr|\.test\.again\.dns)/$1V4NET/g;
533 s/\b\Q$parm_ipv6_test_net\E(?=:[\da-f]+:[\da-f]+:[\da-f]+)/V6NET/gi;
536 # ======== IP error numbers and messages ========
537 # These vary between operating systems
538 s/Can't assign requested address/Network Error/;
539 s/Cannot assign requested address/Network Error/;
540 s/Operation timed out/Connection timed out/;
541 s/Address family not supported by protocol family/Network Error/;
542 s/Network is unreachable/Network Error/;
543 s/Invalid argument/Network Error/;
545 s/\(\d+\): Network/(dd): Network/;
546 s/\(\d+\): Connection refused/(dd): Connection refused/;
547 s/\(\d+\): Connection timed out/(dd): Connection timed out/;
548 s/\d+ 65 Connection refused/dd 65 Connection refused/;
549 s/\d+ 321 Connection timed out/dd 321 Connection timed out/;
552 # ======== Other error numbers ========
553 s/errno=\d+/errno=dd/g;
556 # ======== Output from ls ========
557 # Different operating systems use different spacing on long output
558 s/ +/ /g if /^[-rwd]{10} /;
561 # ======== Message sizes =========
562 # Message sizes vary, owing to different logins and host names that get
563 # automatically inserted. I can't think of any way of even approximately
566 s/([\s,])S=\d+\b/$1S=sss/;
568 s/^(\s*\d+m\s+)\d+(\s+[a-z0-9-]{16} <)/$1sss$2/i if $is_stdout;
569 s/\sSIZE=\d+\b/ SIZE=ssss/ if $is_stderr || $is_stdout;
570 s/\ssize=\d+\b/ size=sss/ if $is_stderr;
571 s/old size = \d+\b/old size = sssss/;
572 s/message size = \d+\b/message size = sss/;
573 s/this message = \d+\b/this message = sss/;
574 s/Size of headers = \d+/Size of headers = sss/;
575 s/sum=(?!0)\d+/sum=dddd/;
576 s/(?<=sum=dddd )count=(?!0)\d+\b/count=dd/;
577 s/(?<=sum=0 )count=(?!0)\d+\b/count=dd/;
578 s/,S is \d+\b/,S is ddddd/;
579 s/\+0100,\d+;/+0100,ddd;/;
580 s/\(\d+ bytes written\)/(ddd bytes written)/;
581 s/added '\d+ 1'/added 'ddd 1'/;
584 # ======== Values in spool space failure message ========
585 s/space=\d+ inodes=\d+/space=xxxxx inodes=xxxxx/;
588 # ======== Filter sizes ========
589 # The sizes of filter files may vary because of the substitution of local
590 # filenames, logins, etc.
592 s/^\d+(?= bytes read from )/ssss/;
595 # ======== OpenSSL error messages ========
596 # Different releases of the OpenSSL libraries seem to give different error
597 # numbers, or handle specific bad conditions in different ways, leading to
598 # different wording in the error messages, so we cannot compare them.
600 s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
603 # ======== Maildir things ========
604 # timestamp output in maildir processing
605 s/(timestamp=|\(timestamp_only\): )\d+/$1ddddddd/g;
607 # maildir delivery files appearing in log lines (in cases of error)
608 s/writing to(?: file)? tmp\/\d+\.[^.]+\.(\S+)/writing to tmp\/MAILDIR.$1/;
610 s/renamed tmp\/\d+\.[^.]+\.(\S+) as new\/\d+\.[^.]+\.(\S+)/renamed tmp\/MAILDIR.$1 as new\/MAILDIR.$1/;
612 # Maildir file names in general
613 s/\b\d+\.H\d+P\d+\b/dddddddddd.HddddddPddddd/;
616 if (/^\d+S,\d+C\s*$/)
621 last if !/^\d+ \d+\s*$/;
622 print MUNGED "ddd d\n";
628 # ======== Output from the "fd" program about open descriptors ========
629 # The statuses seem to be different on different operating systems, but
630 # at least we'll still be checking the number of open fd's.
632 s/max fd = \d+/max fd = dddd/;
633 s/status=0 RDONLY/STATUS/g;
634 s/status=1 WRONLY/STATUS/g;
635 s/status=2 RDWR/STATUS/g;
638 # ======== Contents of spool files ========
639 # A couple of tests dump the contents of the -H file. The length fields
640 # will be wrong because of different user names, etc.
641 s/^\d\d\d(?=[PFS*])/ddd/;
644 # ==========================================================
645 # Some munging is specific to the specific file types
647 # ======== stdout ========
651 # Skip translate_ip_address and use_classresources in -bP output because
652 # they aren't always there.
654 next if /translate_ip_address =/;
655 next if /use_classresources/;
657 # In certain filter tests, remove initial filter lines because they just
658 # clog up by repetition.
662 next if /^(Sender\staken\sfrom|
663 Return-path\scopied\sfrom|
666 if (/^Testing \S+ filter/)
668 $_ = <IN>; # remove blank line
674 # ======== stderr ========
678 # The very first line of debugging output will vary
680 s/^Exim version .*/Exim version x.yz ..../;
682 # Debugging lines for Exim terminations
684 s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
686 # IP address lookups use gethostbyname() when IPv6 is not supported,
687 # and gethostbyname2() or getipnodebyname() when it is.
689 s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
691 # We have to omit the localhost ::1 address so that all is well in
692 # the IPv4-only case.
694 print MUNGED "MUNGED: ::1 will be omitted in what follows\n"
695 if (/looked up these IP addresses/);
696 next if /name=localhost address=::1/;
698 # Various other IPv6 lines must be omitted too
700 next if /using host_fake_gethostbyname for \S+ \(IPv6\)/;
701 next if /get\[host\|ipnode\]byname\[2\]\(af=inet6\)/;
702 next if /DNS lookup of \S+ \(AAAA\) using fakens/;
703 next if / in dns_ipv4_lookup?/;
705 if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
707 $_= <IN>; # Gets "returning DNS_NODATA"
711 # Skip tls_advertise_hosts and hosts_require_tls checks when the options
712 # are unset, because tls ain't always there.
714 next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
715 \sno\s\(option\sunset\)/x;
717 # Skip auxiliary group lists because they will vary.
719 next if /auxiliary group list:/;
721 # Skip "extracted from gecos field" because the gecos field varies
723 next if /extracted from gecos field/;
725 # Skip "waiting for data on socket" and "read response data: size=" lines
726 # because some systems pack more stuff into packets than others.
728 next if /waiting for data on socket/;
729 next if /read response data: size=/;
731 # If Exim is compiled with readline support but it can't find the library
732 # to load, there will be an extra debug line. Omit it.
734 next if /failed to load readline:/;
736 # Some DBM libraries seem to make DBM files on opening with O_RDWR without
737 # O_CREAT; other's don't. In the latter case there is some debugging output
738 # which is not present in the former. Skip the relevant lines (there are
741 if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
747 # Some tests turn on +expand debugging to check on expansions.
748 # Unfortunately, the Received: expansion varies, depending on whether TLS
749 # is compiled or not. So we must remove the relevant debugging if it is.
751 if (/^condition: def:tls_cipher/)
753 while (<IN>) { last if /^condition: def:sender_address/; }
755 elsif (/^expanding: Received: /)
757 while (<IN>) { last if !/^\s/; }
760 # When Exim is checking the size of directories for maildir, it uses
761 # the check_dir_size() function to scan directories. Of course, the order
762 # of the files that are obtained using readdir() varies from system to
763 # system. We therefore buffer up debugging lines from check_dir_size()
764 # and sort them before outputting them.
766 if (/^check_dir_size:/ || /^skipping TESTSUITE\/test-mail\//)
774 print MUNGED "MUNGED: the check_dir_size lines have been sorted " .
775 "to ensure consistency\n";
776 @saved = sort(@saved);
781 # Skip some lines that Exim puts out at the start of debugging output
782 # because they will be different in different binaries.
785 unless (/^Berkeley DB: / ||
786 /^Probably (?:Berkeley DB|ndbm|GDBM)/ ||
787 /^Authenticators:/ ||
792 /^log selectors =/ ||
794 /^Fixed never_users:/ ||
802 # ======== All files other than stderr ========
814 ##################################################
815 # Subroutine to interact with caller #
816 ##################################################
818 # Arguments: [0] the prompt string
819 # [1] if there is a U in the prompt and $force_update is true
820 # Returns: nothing (it sets $_)
824 if ($_[1]) { $_ = "u"; print "... update forced\n"; }
831 ##################################################
832 # Subroutine to compare one output file #
833 ##################################################
835 # When an Exim server is part of the test, its output is in separate files from
836 # an Exim client. The server data is concatenated with the client data as part
837 # of the munging operation.
839 # Arguments: [0] the name of the main raw output file
840 # [1] the name of the server raw output file or undef
841 # [2] where to put the munged copy
842 # [3] the name of the saved file
843 # [4] TRUE if this is a log file whose deliveries must be sorted
845 # Returns: 0 comparison succeeded or differences to be ignored
846 # 1 comparison failed; files were updated (=> re-compare)
848 # Does not return if the user replies "Q" to a prompt.
851 my($rf,$rsf,$mf,$sf,$sortfile) = @_;
853 # If there is no saved file, the raw files must either not exist, or be
854 # empty. The test ! -s is TRUE if the file does not exist or is empty.
858 return 0 if (! -s $rf && ! -s $rsf);
861 print "** $rf is not empty\n" if (-s $rf);
862 print "** $rsf is not empty\n" if (defined $rsf && -s $rsf);
866 print "Continue, Show, or Quit? [Q] ";
868 tests_exit(1) if /^q?$/i;
873 foreach $f ($rf, $rsf)
875 if (defined $f && -s $f)
878 print "------------ $f -----------\n"
879 if (defined $rf && -s $rf && defined $rsf && -s $rsf);
887 interact("Continue, Update & retry, Quit? [Q] ", $force_update);
888 tests_exit(1) if /^q?$/i;
894 # Control reaches here if either (a) there is a saved file ($sf), or (b) there
895 # was a request to create a saved file. First, create the munged file from any
896 # data that does exist.
898 open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
899 my($truncated) = munge($rf) if -e $rf;
900 if (defined $rsf && -e $rsf)
902 print MUNGED "\n******** SERVER ********\n";
903 $truncated |= munge($rsf);
907 # If a saved file exists, do the comparison. There are two awkward cases:
909 # If "*** truncated ***" was found in the new file, it means that a log line
910 # was overlong, and truncated. The problem is that it may be truncated at
911 # different points on different systems, because of different user name
912 # lengths. We reload the file and the saved file, and remove lines from the new
913 # file that precede "*** truncated ***" until we reach one that matches the
914 # line that precedes it in the saved file.
916 # If $sortfile is set, we are dealing with a mainlog file where the deliveries
917 # for an individual message might vary in their order from system to system, as
918 # a result of parallel deliveries. We load the munged file and sort sequences
923 # Deal with truncated text items
927 my(@munged, @saved, $i, $j, $k);
929 open(MUNGED, "$mf") || tests_exit(-1, "Failed to open $mf: $!");
932 open(SAVED, "$sf") || tests_exit(-1, "Failed to open $sf: $!");
937 for ($i = 0; $i < @munged; $i++)
939 if ($munged[$i] =~ /\*\*\* truncated \*\*\*/)
941 for (; $j < @saved; $j++)
942 { last if $saved[$j] =~ /\*\*\* truncated \*\*\*/; }
943 last if $j >= @saved; # not found in saved
945 for ($k = $i - 1; $k >= 0; $k--)
946 { last if $munged[$k] eq $saved[$j - 1]; }
948 last if $k <= 0; # failed to find previous match
949 splice @munged, $k + 1, $i - $k - 1;
954 open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
955 for ($i = 0; $i < @munged; $i++)
956 { print MUNGED $munged[$i]; }
960 # Deal with log sorting
966 open(MUNGED, "$mf") || tests_exit(-1, "Failed to open $mf: $!");
970 for ($i = 0; $i < @munged; $i++)
972 if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/)
974 for ($j = $i + 1; $j < @munged; $j++)
976 last if $munged[$j] !~
977 /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/;
979 @temp = splice(@munged, $i, $j - $i);
981 splice(@munged, $i, 0, @temp);
985 open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
986 print MUNGED "**NOTE: The delivery lines in this file have been sorted.\n";
987 for ($i = 0; $i < @munged; $i++)
988 { print MUNGED $munged[$i]; }
994 return 0 if (system("$cf $mf $sf >test-cf") == 0);
996 # Handle comparison failure
998 print "** Comparison of $mf with $sf failed";
999 system("$more test-cf");
1004 interact("Continue, Update & retry, Quit? [Q] ", $force_update);
1005 tests_exit(1) if /^q?$/i;
1011 # Update or delete the saved file, and give the appropriate return code.
1014 { tests_exit(-1, "Failed to cp $mf $sf") if system("cp $mf $sf") != 0; }
1016 { tests_exit(-1, "Failed to unlink $sf") if !unlink($sf); }
1023 ##################################################
1024 # Subroutine to check the output of a test #
1025 ##################################################
1027 # This function is called when the series of subtests is complete. It makes
1028 # use of check() file, whose arguments are:
1030 # [0] the name of the main raw output file
1031 # [1] the name of the server raw output file or undef
1032 # [2] where to put the munged copy
1033 # [3] the name of the saved file
1034 # [4] TRUE if this is a log file whose deliveries must be sorted
1037 # Returns: 0 if the output compared equal
1038 # 1 if files were updated and the test must be re-run
1043 $yield = 1 if check_file("spool/log/paniclog",
1044 "spool/log/serverpaniclog",
1045 "test-paniclog-munged",
1046 "paniclog/$testno", 0);
1048 $yield = 1 if check_file("spool/log/rejectlog",
1049 "spool/log/serverrejectlog",
1050 "test-rejectlog-munged",
1051 "rejectlog/$testno", 0);
1053 $yield = 1 if check_file("spool/log/mainlog",
1054 "spool/log/servermainlog",
1055 "test-mainlog-munged",
1056 "log/$testno", $sortlog);
1060 $yield = 1 if check_file("test-stdout",
1061 "test-stdout-server",
1062 "test-stdout-munged",
1063 "stdout/$testno", 0);
1068 $yield = 1 if check_file("test-stderr",
1069 "test-stderr-server",
1070 "test-stderr-munged",
1071 "stderr/$testno", 0);
1074 # Compare any delivered messages, unless this test is skipped.
1076 if (! $message_skip)
1080 # Get a list of expected mailbox files for this script. We don't bother with
1081 # directories, just the files within them.
1083 foreach $oldmail (@oldmails)
1085 next unless $oldmail =~ /^mail\/$testno\./;
1086 print ">> EXPECT $oldmail\n" if $debug;
1087 $expected_mails{$oldmail} = 1;
1090 # If there are any files in test-mail, compare them. Note that "." and
1091 # ".." are automatically omitted by list_files_below().
1093 @mails = list_files_below("test-mail");
1095 foreach $mail (@mails)
1097 next if $mail eq "test-mail/oncelog";
1099 $saved_mail = substr($mail, 10); # Remove "test-mail/"
1100 $saved_mail =~ s/^$parm_caller(\/|$)/CALLER/; # Convert caller name
1102 if ($saved_mail =~ /(\d+\.[^.]+\.)/)
1105 $saved_mail =~ s/(\d+\.[^.]+\.)/$msgno./gx;
1108 print ">> COMPARE $mail mail/$testno.$saved_mail\n" if $debug;
1109 $yield = 1 if check_file($mail, undef, "test-mail-munged",
1110 "mail/$testno.$saved_mail", 0);
1111 delete $expected_mails{"mail/$testno.$saved_mail"};
1114 # Complain if not all expected mails have been found
1116 if (scalar(keys %expected_mails) != 0)
1118 foreach $key (keys %expected_mails)
1119 { print "** no test file found for $key\n"; }
1123 interact("Continue, Update & retry, or Quit? [Q] ", $force_update);
1124 tests_exit(1) if /^q?$/i;
1127 # For update, we not only have to unlink the file, but we must also
1128 # remove it from the @oldmails vector, as otherwise it will still be
1129 # checked for when we re-run the test.
1133 foreach $key (keys %expected_mails)
1136 tests_exit(-1, "Failed to unlink $key") if !unlink("$key");
1137 for ($i = 0; $i < @oldmails; $i++)
1139 if ($oldmails[$i] eq $key)
1141 splice @oldmails, $i, 1;
1152 # Compare any remaining message logs, unless this test is skipped.
1156 # Get a list of expected msglog files for this test
1158 foreach $oldmsglog (@oldmsglogs)
1160 next unless $oldmsglog =~ /^$testno\./;
1161 $expected_msglogs{$oldmsglog} = 1;
1164 # If there are any files in spool/msglog, compare them. However, we have
1165 # to munge the file names because they are message ids, which are
1168 if (opendir(DIR, "spool/msglog"))
1170 @msglogs = sort readdir(DIR);
1173 foreach $msglog (@msglogs)
1175 next if ($msglog eq "." || $msglog eq ".." || $msglog eq "CVS");
1176 ($munged_msglog = $msglog) =~
1177 s/((?:[^\W_]{6}-){2}[^\W_]{2})
1178 /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
1179 $yield = 1 if check_file("spool/msglog/$msglog", undef,
1180 "test-msglog-munged", "msglog/$testno.$munged_msglog", 0);
1181 delete $expected_msglogs{"$testno.$munged_msglog"};
1185 # Complain if not all expected msglogs have been found
1187 if (scalar(keys %expected_msglogs) != 0)
1189 foreach $key (keys %expected_msglogs)
1191 print "** no test msglog found for msglog/$key\n";
1192 ($msgid) = $key =~ /^\d+\.(.*)$/;
1193 foreach $cachekey (keys %cache)
1195 if ($cache{$cachekey} eq $msgid)
1197 print "** original msgid $cachekey\n";
1205 interact("Continue, Update, or Quit? [Q] ", $force_update);
1206 tests_exit(1) if /^q?$/i;
1210 foreach $key (keys %expected_msglogs)
1212 tests_exit(-1, "Failed to unlink msglog/$key")
1213 if !unlink("msglog/$key");
1226 ##################################################
1227 # Subroutine to run one "system" command #
1228 ##################################################
1230 # We put this in a subroutine so that the command can be reflected when
1233 # Argument: the command to be run
1241 $prcmd =~ s/; /;\n>> /;
1242 print ">> $prcmd\n";
1249 ##################################################
1250 # Subroutine to run one script command #
1251 ##################################################
1253 # The <SCRIPT> file is open for us to read an optional return code line,
1254 # followed by the command line and any following data lines for stdin. The
1255 # command line can be continued by the use of \. Data lines are not continued
1256 # in this way. In all lines, the following substutions are made:
1258 # DIR => the current directory
1259 # CALLER => the caller of this script
1261 # Arguments: the current test number
1262 # reference to the subtest number, holding previous value
1263 # reference to the expected return code value
1264 # reference to where to put the command name (for messages)
1266 # Returns: 0 the commmand was executed inline, no subprocess was run
1267 # 1 a non-exim command was run and waited for
1268 # 2 an exim command was run and waited for
1269 # 3 a command was run and not waited for (daemon, server, exim_lock)
1270 # 4 EOF was encountered after an initial return code line
1273 my($testno) = $_[0];
1274 my($subtestref) = $_[1];
1275 my($commandnameref) = $_[3];
1278 if (/^(\d+)\s*$/) # Handle unusual return code
1283 return 4 if !defined $_; # Missing command
1290 # Handle concatenated command lines
1293 while (substr($_, -1) eq"\\")
1296 $_ = substr($_, 0, -1);
1297 chomp($temp = <SCRIPT>);
1309 do_substitute($testno);
1310 if ($debug) { printf ">> $_\n"; }
1312 # Pass back the command name (for messages)
1314 ($$commandnameref) = /^(\S+)/;
1316 # Here follows code for handling the various different commands that are
1317 # supported by this script. The first group of commands are all freestanding
1318 # in that they share no common code and are not followed by any data lines.
1324 # The "dbmbuild" command runs exim_dbmbuild. This is used both to test the
1325 # utility and to make DBM files for testing DBM lookups.
1327 if (/^dbmbuild\s+(\S+)\s+(\S+)/)
1329 run_system("(./eximdir/exim_dbmbuild $parm_cwd/$1 $parm_cwd/$2;" .
1330 "echo exim_dbmbuild exit code = \$?)" .
1336 # The "dump" command runs exim_dumpdb. On different systems, the output for
1337 # some types of dump may appear in a different order because it's just hauled
1338 # out of the DBM file. We can solve this by sorting. Ignore the leading
1339 # date/time, as it will be flattened later during munging.
1341 if (/^dump\s+(\S+)/)
1345 print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;
1346 open(IN, "./eximdir/exim_dumpdb $parm_cwd/spool $which |");
1349 if ($which eq "callout")
1352 my($aa) = substr $a, 21;
1353 my($bb) = substr $b, 21;
1357 open(OUT, ">>test-stdout");
1358 print OUT "+++++++++++++++++++++++++++\n";
1365 # The "echo" command is a way of writing comments to the screen.
1367 if (/^echo\s+(.*)$/)
1374 # The "exim_lock" command runs exim_lock in the same manner as "server",
1375 # but it doesn't use any input.
1377 if (/^exim_lock\s+(.*)$/)
1379 $cmd = "./eximdir/exim_lock $1 >>test-stdout";
1380 $server_pid = open SERVERCMD, "|$cmd" ||
1381 tests_exit(-1, "Failed to run $cmd\n");
1383 # This gives the process time to get started; otherwise the next
1384 # process may not find it there when it expects it.
1386 select(undef, undef, undef, 0.01);
1391 # The "exinext" command runs exinext
1393 if (/^exinext\s+(.*)/)
1395 run_system("(./eximdir/exinext " .
1396 "-DEXIM_PATH=$parm_cwd/eximdir/exim " .
1397 "-C $parm_cwd/test-config $1;" .
1398 "echo exinext exit code = \$?)" .
1404 # The "gnutls" command makes a copy of saved GnuTLS parameter data in the
1405 # spool directory, to save Exim from re-creating it each time.
1409 run_system "sudo cp -p aux-fixed/gnutls-params spool/gnutls-params;" .
1410 "sudo chown $parm_eximuser:$parm_eximgroup spool/gnutls-params;" .
1411 "sudo chmod 0400 spool/gnutls-params";
1416 # The "killdaemon" command should ultimately follow the starting of any Exim
1417 # daemon with the -bd option. We kill with SIGINT rather than SIGTERM to stop
1418 # it outputting "Terminated" to the terminal when not in the background.
1422 $pid = `cat $parm_cwd/spool/exim-daemon.*`;
1423 run_system("sudo /bin/kill -SIGINT $pid");
1424 close DAEMONCMD; # Waits for process
1425 run_system("sudo /bin/rm -f spool/exim-daemon.*");
1430 # The "millisleep" command is like "sleep" except that its argument is in
1431 # milliseconds, thus allowing for a subsecond sleep, which is, in fact, all it
1434 elsif (/^millisleep\s+(.*)$/)
1436 select(undef, undef, undef, $1/1000);
1441 # The "sleep" command does just that. For sleeps longer than 1 second we
1442 # tell the user what's going on.
1444 if (/^sleep\s+(.*)$/)
1452 printf(" Test %d sleep $1 ", $$subtestref);
1458 printf("\r Test %d $cr", $$subtestref);
1464 # Various Unix management commands are recognized
1466 if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
1467 /^sudo (rmdir|rm|chown|chmod)\s/)
1469 run_system("$_ >>test-stdout 2>>test-stderr");
1478 # The next group of commands are also freestanding, but they are all followed
1482 # The "server" command starts up a script-driven server that runs in parallel
1483 # with the following exim command. Therefore, we want to run a subprocess and
1484 # not yet wait for it to complete. The waiting happens after the next exim
1485 # command, triggered by $server_pid being non-zero. The server sends its output
1486 # to a different file. The variable $server_opts, if not empty, contains
1487 # options to disable IPv4 or IPv6 if necessary.
1489 if (/^server\s+(.*)$/)
1491 $cmd = "./bin/server $server_opts $1 >>test-stdout-server";
1492 print ">> $cmd\n" if ($debug);
1493 $server_pid = open SERVERCMD, "|$cmd" || tests_exit(-1, "Failed to run $cmd");
1494 SERVERCMD->autoflush(1);
1495 print ">> Server pid is $server_pid\n" if $debug;
1499 last if /^\*{4}\s*$/;
1502 print SERVERCMD "++++\n"; # Send end to server; can't send EOF yet
1503 # because close() waits for the process.
1505 # This gives the server time to get started; otherwise the next
1506 # process may not find it there when it expects it.
1508 select(undef, undef, undef, 0.01);
1513 # The "write" command is a way of creating files of specific sizes for
1514 # buffering tests, or containing specific data lines from within the script
1515 # (rather than hold lots of little files). The "catwrite" command does the
1516 # same, but it also copies the lines to test-stdout.
1518 if (/^(cat)?write\s+(\S+)(?:\s+(.*))?\s*$/)
1520 my($cat) = defined $1;
1522 @sizes = split /\s+/, $3 if defined $3;
1523 open FILE, ">$2" || tests_exit(-1, "Failed to open \"$2\": $!");
1527 open CAT, ">>test-stdout" ||
1528 tests_exit(-1, "Failed to open test-stdout: $!");
1529 print CAT "==========\n";
1532 if (scalar @sizes > 0)
1539 last if /^\+{4}\s*$/;
1546 while (scalar @sizes > 0)
1548 ($count,$len,$leadin) = (shift @sizes) =~ /(\d+)x(\d+)(?:=(.*))?/;
1549 $leadin = "" if !defined $leadin;
1551 $len -= length($leadin) + 1;
1552 while ($count-- > 0)
1554 print FILE $leadin, "a" x $len, "\n";
1555 print CAT $leadin, "a" x $len, "\n" if $cat;
1560 # Post data, or only data if no sized data
1565 last if /^\*{4}\s*$/;
1573 print CAT "==========\n";
1584 # From this point on, script commands are implemented by setting up a shell
1585 # command in the variable $cmd. Shared code to run this command and handle its
1586 # input and output follows.
1588 # The "client" and "client-ssl" commands run a script-driven program that plays
1589 # the part of an email client. We also have the availability of running Perl
1590 # for doing one-off special things. Note that all these commands expect stdin
1591 # data to be supplied.
1593 if (/^client/ || /^client-ssl/ || /^(sudo\s+)?perl\b/)
1595 s"client"./bin/client";
1596 $cmd = "$_ >>test-stdout 2>>test-stderr";
1599 # For the "exim" command, replace the text "exim" with the path for the test
1600 # binary, plus -D options to pass over various parameters, and a -C option for
1601 # the testing configuration file. When running in the test harness, Exim does
1602 # not drop privilege when -C and -D options are present. To run the exim
1603 # command as root, we use sudo.
1605 elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
1608 my($envset) = (defined $1)? $1 : "";
1609 my($sudo) = (defined $3)? "sudo " : "";
1610 my($special)= (defined $4)? $4 : "";
1611 $wait_time = (defined $2)? $2 : 0;
1613 # Return 2 rather than 1 afterwards
1617 # Update the test number
1619 $$subtestref = $$subtestref + 1;
1620 printf(" Test %d $cr", $$subtestref);
1622 # Copy the configuration file, making the usual substitutions.
1624 open (IN, "$parm_cwd/confs/$testno") ||
1625 tests_exit(-1, "Couldn't open $parm_cwd/confs/$testno: $!\n");
1626 open (OUT, ">test-config") ||
1627 tests_exit(-1, "Couldn't open test-config: $!\n");
1630 do_substitute($testno);
1636 # The string $msg1 in args substitutes the message id of the first
1637 # message on the queue, and so on. */
1639 if ($args =~ /\$msg/)
1641 my($listcmd) = "$parm_cwd/eximdir/exim -bp " .
1642 "-DEXIM_PATH=$parm_cwd/eximdir/exim " .
1643 "-C $parm_cwd/test-config |";
1644 print ">> Getting queue list from:\n>> $listcmd\n" if ($debug);
1645 open (QLIST, $listcmd) || tests_exit(-1, "Couldn't run \"exim -bp\": $!\n");
1647 while (<QLIST>) { push (@msglist, $1) if /^\s*\d+[smhdw]\s+\S+\s+(\S+)/; }
1650 # Done backwards just in case there are more than 9
1653 for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
1656 # If -d is specified in $optargs, remove it from $args; i.e. let
1657 # the command line for runtest override. Then run Exim.
1659 $args =~ s/(?:^|\s)-d\S*// if $optargs =~ /(?:^|\s)-d/;
1661 $cmd = "$envset$sudo$parm_cwd/eximdir/exim$special$optargs " .
1662 "-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
1663 "-C $parm_cwd/test-config $args " .
1664 ">>test-stdout 2>>test-stderr";
1666 # If the command is starting an Exim daemon, we run it in the same
1667 # way as the "server" command above, that is, we don't want to wait
1668 # for the process to finish. That happens when "killdaemon" is obeyed later
1669 # in the script. We also send the stderr output to test-stderr-server. The
1670 # daemon has its log files put in a different place too (by configuring with
1671 # log_file_path). This requires the directory to be set up in advance.
1673 # There are also times when we want to run a non-daemon version of Exim
1674 # (e.g. a queue runner) with the server configuration. In this case,
1675 # we also define -DNOTDAEMON.
1677 if ($cmd =~ /\s-DSERVER=server\s/ && $cmd !~ /\s-DNOTDAEMON\s/)
1679 if ($debug) { printf ">> daemon: $cmd\n"; }
1680 run_system("sudo mkdir spool/log 2>/dev/null");
1681 run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
1683 # Before running the command, convert the -bd option into -bdf so that an
1684 # Exim daemon doesn't double fork. This means that when we wait close
1685 # DAEMONCMD, it waits for the correct process.
1687 $cmd =~ s/\s-bd\s/ -bdf /;
1688 print ">> |${cmd}-server\n" if ($debug);
1689 open DAEMONCMD, "|${cmd}-server" || tests_exit(-1, "Failed to run $cmd");
1690 DAEMONCMD->autoflush(1);
1691 while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
1692 select(undef, undef, undef, 0.3); # Let the daemon get going
1693 return 3; # Don't wait
1700 else { tests_exit(-1, "Command unrecognized in line $lineno: $_"); }
1703 # Run the command, with stdin connected to a pipe, and write the stdin data
1704 # to it, with appropriate substitutions. If a line ends with \NONL\, chop off
1705 # the terminating newline (and the \NONL\). If the command contains
1706 # -DSERVER=server add "-server" to the command, where it will adjoin the name
1707 # for the stderr file. See comment above about the use of -DSERVER.
1709 $stderrsuffix = ($cmd =~ /\s-DSERVER=server\s/)? "-server" : "";
1710 print ">> |${cmd}${stderrsuffix}\n" if ($debug);
1711 open CMD, "|${cmd}${stderrsuffix}" || tests_exit(1, "Failed to run $cmd");
1717 last if /^\*{4}\s*$/;
1718 do_substitute($testno);
1719 if (/^(.*)\\NONL\\\s*$/) { print CMD $1; } else { print CMD; }
1722 # For timeout tests, wait before closing the pipe; we expect a
1723 # SIGPIPE error in this case.
1727 printf(" Test %d sleep $wait_time ", $$subtestref);
1728 while ($wait_time-- > 0)
1733 printf("\r Test %d $cr", $$subtestref);
1736 $sigpipehappened = 0;
1737 close CMD; # Waits for command to finish
1738 return $yield; # Ran command and waited
1744 ###############################################################################
1745 ###############################################################################
1747 # Here beginneth the Main Program ...
1749 ###############################################################################
1750 ###############################################################################
1754 print "Exim tester $testversion\n";
1757 ##################################################
1758 # Check for the "less" command #
1759 ##################################################
1761 $more = "more" if system("which less >/dev/null 2>&1") != 0;
1765 ##################################################
1766 # Check for sudo access to root #
1767 ##################################################
1769 print "You need to have sudo access to root to run these tests. Checking ...\n";
1770 if (system("sudo date >/dev/null") != 0)
1772 die "** Test for sudo failed: testing abandoned.\n";
1776 print "Test for sudo OK\n";
1781 ##################################################
1782 # See if an Exim binary has been given #
1783 ##################################################
1785 # If the first character of the first argument is '/', the argument is taken
1786 # as the path to the binary.
1788 $parm_exim = (@ARGV > 0 && $ARGV[0] =~ ?^/?)? shift @ARGV : "";
1789 print "Exim binary is $parm_exim\n" if $parm_exim ne "";
1793 ##################################################
1794 # Sort out options and which tests are to be run #
1795 ##################################################
1797 # There are a few possible options for the test script itself; after these, any
1798 # options are passed on to Exim calls within the tests. Typically, this is used
1799 # to turn on Exim debugging while setting up a test.
1801 while (@ARGV > 0 && $ARGV[0] =~ /^-/)
1803 my($arg) = shift @ARGV;
1806 if ($arg eq "-DEBUG") { $debug = 1; $cr = "\n"; next; }
1807 if ($arg eq "-DIFF") { $cf = "diff -u"; next; }
1808 if ($arg eq "-UPDATE") { $force_update = 1; next; }
1809 if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
1810 if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
1811 if ($arg eq "-KEEP") { $save_output = 1; next; }
1813 $optargs .= " $arg";
1816 # Any subsequent arguments are a range of test numbers.
1820 $test_end = $test_start = $ARGV[0];
1821 $test_end = $ARGV[1] if (@ARGV > 1);
1822 $test_end = ($test_start >= 9000)? $test_special_top : $test_top
1823 if $test_end eq "+";
1824 die "** Test numbers out of order\n" if ($test_end < $test_start);
1828 ##################################################
1829 # Make the command's directory current #
1830 ##################################################
1832 # After doing so, we find its absolute path name.
1835 $cwd = '.' if ($cwd !~ s|/[^/]+$||);
1836 chdir($cwd) || die "** Failed to chdir to \"$cwd\": $!\n";
1837 $parm_cwd = Cwd::getcwd();
1840 ##################################################
1841 # Search for an Exim binary to test #
1842 ##################################################
1844 # If an Exim binary hasn't been provided, try to find one. We can handle the
1845 # case where exim-testsuite is installed alongside Exim source directories. For
1846 # PH's private convenience, if there's a directory just called "exim4", that
1847 # takes precedence; otherwise exim-snapshot takes precedence over any numbered
1850 if ($parm_exim eq "")
1852 my($use_srcdir) = "";
1854 opendir DIR, ".." || die "** Failed to opendir \"..\": $!\n";
1855 while ($f = readdir(DIR))
1859 # Try this directory if it is "exim4" or if it is exim-snapshot or exim-n.m
1860 # possibly followed by -RCx where n.m is greater than any previously tried
1861 # directory. Thus, we should choose the highest version of Exim that has
1864 if ($f eq "exim4" || $f eq "exim-snapshot")
1868 if ($f =~ /^exim-\d+\.\d+(-RC\d+)?$/ && $f gt $use_srcdir); }
1870 # Look for a build directory with a binary in it. If we find a binary,
1871 # accept this source directory.
1875 opendir SRCDIR, "../$srcdir" ||
1876 die "** Failed to opendir \"$cwd/../$srcdir\": $!\n";
1877 while ($f = readdir(SRCDIR))
1879 if ($f =~ /^build-/ && -e "../$srcdir/$f/exim")
1881 $use_srcdir = $srcdir;
1882 $parm_exim = "$cwd/../$srcdir/$f/exim";
1883 $parm_exim =~ s'/[^/]+/\.\./'/';
1890 # If we have found "exim4" or "exim-snapshot", that takes precedence.
1891 # Otherwise, continue to see if there's a later version.
1893 last if $use_srcdir eq "exim4" || $use_srcdir eq "exim-snapshot";
1896 print "Exim binary found in $parm_exim\n" if $parm_exim ne "";
1899 # If $parm_exim is still empty, ask the caller
1901 if ($parm_exim eq "")
1903 print "** Did not find an Exim binary to test\n";
1904 for ($i = 0; $i < 5; $i++)
1907 print "** Enter pathname for Exim binary: ";
1908 chomp($trybin = <STDIN>);
1911 $parm_exim = $trybin;
1916 print "** $trybin does not exist\n";
1919 die "** Too many tries\n" if $parm_exim eq "";
1924 ##################################################
1925 # Find what is in the binary #
1926 ##################################################
1928 open(EXIMINFO, "$parm_exim -C confs/0000 -DDIR=$parm_cwd " .
1929 "-bP exim_user exim_group|") ||
1930 die "** Cannot run $parm_exim: $!\n";
1933 $parm_eximuser = $1 if /^exim_user = (.*)$/;
1934 $parm_eximgroup = $1 if /^exim_group = (.*)$/;
1938 if (defined $parm_eximuser)
1940 if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
1941 else { $parm_exim_uid = getpwnam($parm_eximuser); }
1944 if (defined $parm_eximgroup)
1946 if ($parm_eximgroup =~ /^\d+$/) { $parm_exim_gid = $parm_eximgroup; }
1947 else { $parm_exim_gid = getgrnam($parm_eximgroup); }
1950 open(EXIMINFO, "$parm_exim -bV -C confs/0000 -DDIR=$parm_cwd |") ||
1951 die "** Cannot run $parm_exim: $!\n";
1953 print "-" x 78, "\n";
1959 if (/^Exim version/) { print; }
1961 elsif (/^Size of off_t: (\d+)/)
1963 $have_largefiles = 1 if $1 > 4;
1966 elsif (/^Support for: (.*)/)
1969 @temp = split /(\s+)/, $1;
1971 %parm_support = @temp;
1974 elsif (/^Lookups: (.*)/)
1977 @temp = split /(\s+)/, $1;
1979 %parm_lookups = @temp;
1982 elsif (/^Authenticators: (.*)/)
1985 @temp = split /(\s+)/, $1;
1987 %parm_authenticators = @temp;
1990 elsif (/^Routers: (.*)/)
1993 @temp = split /(\s+)/, $1;
1995 %parm_routers = @temp;
1998 # Some transports have options, e.g. appendfile/maildir. For those, ensure
1999 # that the basic transport name is set, and then the name with each of the
2002 elsif (/^Transports: (.*)/)
2005 @temp = split /(\s+)/, $1;
2008 %parm_transports = @temp;
2009 foreach $k (keys %parm_transports)
2013 @temp = split /\//, $k;
2014 $parm_transports{"$temp[0]"} = " ";
2015 for ($i = 1; $i < @temp; $i++)
2016 { $parm_transports{"$temp[0]/$temp[$i]"} = " "; }
2022 print "-" x 78, "\n";
2025 ##################################################
2026 # Check for SpamAssassin and ClamAV #
2027 ##################################################
2029 # These are crude tests. If they aren't good enough, we'll have to improve
2030 # them, for example by actually passing a message through spamc or clamscan.
2032 if (defined $parm_support{'Content_Scanning'})
2034 if (system("spamc -h 2>/dev/null >/dev/null") == 0)
2036 $parm_running{'SpamAssassin'} = ' ';
2037 print "The spamc command works:\n";
2039 # This test for an active SpamAssassin is courtesy of John Jetmore.
2040 # The tests are hard coded to localhost:783, so no point in making
2041 # this test flexible like the clamav test until the test scripts are
2042 # changed. spamd doesn't have the nice PING/PONG protoccol that
2043 # clamd does, but it does respond to errors in an informative manner,
2046 my($sint,$sport) = ('127.0.0.1',783);
2049 my $sin = sockaddr_in($sport, inet_aton($sint))
2050 or die "** Failed packing $sint:$sport\n";
2051 socket(SOCK, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
2052 or die "** Unable to open socket $sint:$sport\n";
2055 sub { die "** Timeout while connecting to socket $sint:$sport\n"; };
2058 or die "** Unable to connect to socket $sint:$sport\n";
2061 select((select(SOCK), $| = 1)[0]);
2062 print SOCK "bad command\r\n";
2065 sub { die "** Timeout while reading from socket $sint:$sport\n"; };
2071 or die "** Did not get SPAMD from socket $sint:$sport. "
2078 print " Assume SpamAssassin (spamd) is not running\n";
2082 $parm_running{'SpamAssassin'} = ' ';
2083 print " SpamAssassin (spamd) seems to be running\n";
2088 print "The spamc command failed: assume SpamAssassin (spamd) is not running\n";
2091 # For ClamAV, we need to find the clamd socket for use in the Exim
2092 # configuration. Search for the clamd configuration file.
2094 if (system("clamscan -h 2>/dev/null >/dev/null") == 0)
2096 my($f, $clamconf, $test_prefix);
2098 print "The clamscan command works";
2100 $test_prefix = $ENV{EXIM_TEST_PREFIX};
2101 $test_prefix = "" if !defined $test_prefix;
2103 foreach $f ("$test_prefix/etc/clamd.conf",
2104 "$test_prefix/usr/local/etc/clamd.conf",
2105 "$test_prefix/etc/clamav/clamd.conf", "")
2114 # Read the ClamAV configuration file and find the socket interface.
2116 if ($clamconf ne "")
2119 open(IN, "$clamconf") || die "\n** Unable to open $clamconf: $!\n";
2122 if (/^LocalSocket\s+(.*)/)
2124 $parm_clamsocket = $1;
2125 $socket_domain = AF_UNIX;
2128 if (/^TCPSocket\s+(\d+)/)
2130 if (defined $parm_clamsocket)
2132 $parm_clamsocket .= " $1";
2133 $socket_domain = AF_INET;
2138 $parm_clamsocket = " $1";
2141 elsif (/^TCPAddr\s+(\S+)/)
2143 if (defined $parm_clamsocket)
2145 $parm_clamsocket = $1 . $parm_clamsocket;
2146 $socket_domain = AF_INET;
2151 $parm_clamsocket = $1;
2157 if (defined $socket_domain)
2159 print ":\n The clamd socket is $parm_clamsocket\n";
2160 # This test for an active ClamAV is courtesy of Daniel Tiefnig.
2164 if ($socket_domain == AF_UNIX)
2166 $socket = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
2168 elsif ($socket_domain == AF_INET)
2170 my ($ca_host, $ca_port) = split(/\s+/,$parm_clamsocket);
2171 my $ca_hostent = gethostbyname($ca_host) or die "** Failed to get raw address for host '$ca_host'\n";
2172 $socket = sockaddr_in($ca_port, $ca_hostent) or die "** Failed packing '$parm_clamsocket'\n";
2176 die "** Unknown socket domain '$socket_domain' (should not happen)\n";
2178 socket(SOCK, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
2179 local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
2181 connect(SOCK, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
2184 my $ofh = select SOCK; $| = 1; select $ofh;
2185 print SOCK "PING\n";
2187 $SIG{ALRM} = sub { die "** Timeout while reading from socket '$parm_clamsocket'\n"; };
2192 $res =~ /PONG/ or die "** Did not get PONG from socket '$parm_clamsocket'. It said: $res\n";
2199 print " Assume ClamAV is not running\n";
2203 $parm_running{'ClamAV'} = ' ';
2204 print " ClamAV seems to be running\n";
2209 print ", but the socket for clamd could not be determined\n";
2210 print "Assume ClamAV is not running\n";
2216 print ", but I can't find a configuration for clamd\n";
2217 print "Assume ClamAV is not running\n";
2223 ##################################################
2224 # Test for the basic requirements #
2225 ##################################################
2227 # This test suite assumes that Exim has been built with at least the "usual"
2228 # set of routers, transports, and lookups. Ensure that this is so.
2232 $missing .= " Lookup: lsearch\n" if (!defined $parm_lookups{'lsearch'});
2234 $missing .= " Router: accept\n" if (!defined $parm_routers{'accept'});
2235 $missing .= " Router: dnslookup\n" if (!defined $parm_routers{'dnslookup'});
2236 $missing .= " Router: manualroute\n" if (!defined $parm_routers{'manualroute'});
2237 $missing .= " Router: redirect\n" if (!defined $parm_routers{'redirect'});
2239 $missing .= " Transport: appendfile\n" if (!defined $parm_transports{'appendfile'});
2240 $missing .= " Transport: autoreply\n" if (!defined $parm_transports{'autoreply'});
2241 $missing .= " Transport: pipe\n" if (!defined $parm_transports{'pipe'});
2242 $missing .= " Transport: smtp\n" if (!defined $parm_transports{'smtp'});
2247 print "** Many features can be included or excluded from Exim binaries.\n";
2248 print "** This test suite requires that Exim is built to contain a certain\n";
2249 print "** set of basic facilities. It seems that some of these are missing\n";
2250 print "** from the binary that is under test, so the test cannot proceed.\n";
2251 print "** The missing facilities are:\n";
2253 die "** Test script abandoned\n";
2257 ##################################################
2258 # Check for the auxiliary programs #
2259 ##################################################
2261 # These are always required:
2263 for $prog ("cf", "checkaccess", "client", "client-ssl", "client-gnutls",
2264 "fakens", "iefbr14", "server")
2266 next if ($prog eq "client-ssl" && !defined $parm_support{'OpenSSL'});
2267 next if ($prog eq "client-gnutls" && !defined $parm_support{'GnuTLS'});
2268 if (!-e "bin/$prog")
2271 print "** bin/$prog does not exist. Have you run ./configure and make?\n";
2272 die "** Test script abandoned\n";
2276 # If the "loaded" binary is missing, we cut out tests for ${dlfunc. It isn't
2277 # compiled on systems where we don't know how to. However, if Exim does not
2278 # have that functionality compiled, we needn't bother.
2280 $dlfunc_deleted = 0;
2281 if (defined $parm_support{'Expand_dlfunc'} && !-e "bin/loaded")
2283 delete $parm_support{'Expand_dlfunc'};
2284 $dlfunc_deleted = 1;
2288 ##################################################
2289 # Find environmental details #
2290 ##################################################
2292 # Find the caller of this program.
2294 ($parm_caller,$pwpw,$parm_caller_uid,$parm_caller_gid,$pwquota,$pwcomm,
2295 $pwgecos, $parm_caller_home) = getpwuid($>);
2297 $pwpw = $pwpw; # Kill Perl warnings
2298 $pwquota = $pwquota;
2300 $pwgecos = $pwgecos;
2302 $parm_caller_group = getgrgid($parm_caller_gid);
2304 print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
2305 print "Home directory is $parm_caller_home\n";
2307 print "You need to be in the Exim group to run these tests. Checking ...";
2309 if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
2315 print "\nOh dear, you are not in the Exim group.\n";
2316 die "** Testing abandoned.\n";
2319 # Find this host's IP addresses - there may be many, of course, but we keep
2320 # one of each type (IPv4 and IPv6).
2328 open(IFCONFIG, "ifconfig -a|") || die "** Cannot run \"ifconfig\": $!\n";
2329 while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
2332 if ($parm_ipv4 eq "" &&
2333 $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
2336 next if ($ip eq "127.0.0.1");
2340 if ($parm_ipv6 eq "" &&
2341 $_ =~ /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)/i)
2344 next if ($ip eq "::1" || $ip =~ /^fe80/i);
2350 # Use private IP addresses if there are no public ones.
2352 $parm_ipv4 = $local_ipv4 if ($parm_ipv4 eq "");
2353 $parm_ipv6 = $local_ipv6 if ($parm_ipv6 eq "");
2355 # If either type of IP address is missing, we need to set the value to
2356 # something other than empty, because that wrecks the substitutions. The value
2357 # is reflected, so use a meaningful string. Set appropriate options for the
2358 # "server" command. In practice, however, many tests assume 127.0.0.1 is
2359 # available, so things will go wrong if there is no IPv4 address. The lack
2360 # of IPV4 or IPv6 can be simulated by command options, which force $have_ipv4
2361 # and $have_ipv6 false.
2363 if ($parm_ipv4 eq "")
2366 $parm_ipv4 = "<no IPv4 address found>";
2367 $server_opts .= " -noipv4";
2369 elsif ($have_ipv4 == 0)
2371 $parm_ipv4 = "<IPv4 testing disabled>";
2372 $server_opts .= " -noipv4";
2376 $parm_running{"IPv4"} = " ";
2379 if ($parm_ipv6 eq "")
2382 $parm_ipv6 = "<no IPv6 address found>";
2383 $server_opts .= " -noipv6";
2384 delete($parm_support{"IPv6"});
2386 elsif ($have_ipv6 == 0)
2388 $parm_ipv6 = "<IPv6 testing disabled>";
2389 $server_opts .= " -noipv6";
2390 delete($parm_support{"IPv6"});
2392 elsif (!defined $parm_support{'IPv6'})
2395 $parm_ipv6 = "<no IPv6 support in Exim binary>";
2396 $server_opts .= " -noipv6";
2400 $parm_running{"IPv6"} = " ";
2403 print "IPv4 address is $parm_ipv4\n";
2404 print "IPv6 address is $parm_ipv6\n";
2406 # Find the host name, fully qualified.
2408 chomp($temp = `hostname`);
2409 $parm_hostname = (gethostbyname($temp))[0];
2410 $parm_hostname = "no.host.name.found" if $parm_hostname eq "";
2411 print "Hostname is $parm_hostname\n";
2413 if ($parm_hostname !~ /\./)
2415 print "\n*** Host name is not fully qualified: this may cause problems ***\n\n";
2418 # Find the user's shell
2420 $parm_shell = $ENV{'SHELL'};
2423 ##################################################
2424 # Create a testing version of Exim #
2425 ##################################################
2427 # We want to be able to run Exim with a variety of configurations. Normally,
2428 # the use of -C to change configuration causes Exim to give up its root
2429 # privilege (unless the caller is exim or root). For these tests, we do not
2430 # want this to happen. Also, we want Exim to know that it is running in its
2433 # We achieve this by copying the binary and patching it as we go. The new
2434 # binary knows it is a testing copy, and it allows -C and -D without loss of
2435 # privilege. Clearly, this file is dangerous to have lying around on systems
2436 # where there are general users with login accounts. To protect against this,
2437 # we put the new binary in a special directory that is accessible only to the
2438 # caller of this script, who is known to have sudo root privilege from the test
2439 # that was done above. Furthermore, we ensure that the binary is deleted at the
2440 # end of the test. First ensure the directory exists.
2443 { unlink "eximdir/exim"; } # Just in case
2446 mkdir("eximdir", 0710) || die "** Unable to mkdir $parm_cwd/eximdir: $!\n";
2447 system("sudo chgrp $parm_eximgroup eximdir");
2450 # The construction of the patched binary must be done as root, so we use
2451 # a separate script. As well as indicating that this is a test-harness binary,
2452 # the version number is patched to "x.yz" so that its length is always the
2453 # same. Otherwise, when it appears in Received: headers, it affects the length
2454 # of the message, which breaks certain comparisons.
2456 die "** Unable to make patched exim: $!\n"
2457 if (system("sudo ./patchexim $parm_exim") != 0);
2459 # From this point on, exits from the program must go via the subroutine
2460 # tests_exit(), so that suitable cleaning up can be done when required.
2461 # Arrange to catch interrupting signals, to assist with this.
2463 $SIG{'INT'} = \&inthandler;
2464 $SIG{'PIPE'} = \&pipehandler;
2466 # For some tests, we need another copy of the binary that is setuid exim rather
2469 system("sudo cp eximdir/exim eximdir/exim_exim;" .
2470 "sudo chown $parm_eximuser eximdir/exim_exim;" .
2471 "sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
2472 "sudo chmod 06755 eximdir/exim_exim");
2475 ##################################################
2476 # Make copies of utilities we might need #
2477 ##################################################
2479 # Certain of the tests make use of some of Exim's utilities. We do not need
2480 # to be root to copy these.
2482 ($parm_exim_dir) = $parm_exim =~ ?^(.*)/exim?;
2484 $dbm_build_deleted = 0;
2485 if (defined $parm_lookups{'dbm'} &&
2486 system("cp $parm_exim_dir/exim_dbmbuild eximdir") != 0)
2488 delete $parm_lookups{'dbm'};
2489 $dbm_build_deleted = 1;
2492 if (system("cp $parm_exim_dir/exim_dumpdb eximdir") != 0)
2494 tests_exit(-1, "Failed to make a copy of exim_dumpdb: $!");
2497 if (system("cp $parm_exim_dir/exim_lock eximdir") != 0)
2499 tests_exit(-1, "Failed to make a copy of exim_lock: $!");
2502 if (system("cp $parm_exim_dir/exinext eximdir") != 0)
2504 tests_exit(-1, "Failed to make a copy of exinext: $!");
2508 ##################################################
2509 # Check that the Exim user can access stuff #
2510 ##################################################
2512 # We delay this test till here so that we can check access to the actual test
2513 # binary. This will be needed when Exim re-exec's itself to do deliveries.
2515 print "Exim user is $parm_eximuser ($parm_exim_uid)\n";
2516 print "Exim group is $parm_eximgroup ($parm_exim_gid)\n";
2517 print "The Exim user needs access to the test suite directory. Checking ...";
2519 if (($rc = system("sudo bin/checkaccess $parm_cwd/eximdir/exim $parm_eximuser $parm_eximgroup")) != 0)
2521 my($why) = "unknown failure $rc";
2523 $why = "Couldn't find user \"$parm_eximuser\"" if $rc == 1;
2524 $why = "Couldn't find group \"$parm_eximgroup\"" if $rc == 2;
2525 $why = "Couldn't read auxiliary group list" if $rc == 3;
2526 $why = "Couldn't get rid of auxiliary groups" if $rc == 4;
2527 $why = "Couldn't set gid" if $rc == 5;
2528 $why = "Couldn't set uid" if $rc == 6;
2529 $why = "Couldn't open \"$parm_cwd/eximdir/exim\"" if $rc == 7;
2530 print "\n** $why\n";
2531 tests_exit(-1, "$parm_eximuser cannot access the test suite directory");
2539 ##################################################
2540 # Create a list of available tests #
2541 ##################################################
2543 # The scripts directory contains a number of subdirectories whose names are
2544 # of the form 0000-xxxx, 1100-xxxx, 2000-xxxx, etc. Each set of tests apart
2545 # from the first requires certain optional features to be included in the Exim
2546 # binary. These requirements are contained in a file called "REQUIRES" within
2547 # the directory. We scan all these tests, discarding those that cannot be run
2548 # because the current binary does not support the right facilities, and also
2549 # those that are outside the numerical range selected.
2551 print "\nTest range is $test_start to $test_end\n";
2552 print "Omitting \${dlfunc expansion tests (loadable module not present)\n"
2554 print "Omitting dbm tests (unable to copy exim_dbmbuild)\n"
2555 if $dbm_build_deleted;
2557 opendir(DIR, "scripts") || tests_exit(-1, "Failed to opendir(\"scripts\"): $!");
2558 @test_dirs = sort readdir(DIR);
2561 for ($i = 0; $i < @test_dirs; $i++)
2563 my($testdir) = $test_dirs[$i];
2566 next if $testdir eq "." || $testdir eq "..";
2567 print ">>Checking $testdir\n" if $debug;
2569 # Skip this directory if the first test is equal or greater than the first
2570 # test in the next directory.
2572 next if ($i < @test_dirs - 1) &&
2573 ($test_start >= substr($test_dirs[$i+1], 0, 4));
2575 # No need to carry on if the end test is less than the first test in this
2578 last if $test_end < substr($testdir, 0, 4);
2580 # Check requirements, if any.
2582 if (open(REQUIRES, "scripts/$testdir/REQUIRES"))
2588 if (/^support (.*)$/)
2590 if (!defined $parm_support{$1}) { $wantthis = 0; last; }
2592 elsif (/^running (.*)$/)
2594 if (!defined $parm_running{$1}) { $wantthis = 0; last; }
2596 elsif (/^lookup (.*)$/)
2598 if (!defined $parm_lookups{$1}) { $wantthis = 0; last; }
2600 elsif (/^authenticators? (.*)$/)
2602 if (!defined $parm_authenticators{$1}) { $wantthis = 0; last; }
2604 elsif (/^router (.*)$/)
2606 if (!defined $parm_routers{$1}) { $wantthis = 0; last; }
2608 elsif (/^transport (.*)$/)
2610 if (!defined $parm_transports{$1}) { $wantthis = 0; last; }
2614 tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");
2621 tests_exit(-1, "Failed to open \"scripts/$testdir/REQUIRES\": $!")
2625 # Loop if we do not want the tests in this subdirectory.
2630 print "Omitting tests in $testdir (missing $_)\n";
2634 # We want the tests from this subdirectory, provided they are in the
2635 # range that was selected.
2637 opendir(SUBDIR, "scripts/$testdir") ||
2638 tests_exit(-1, "Failed to opendir(\"scripts/$testdir\"): $!");
2639 @testlist = sort readdir(SUBDIR);
2642 foreach $test (@testlist)
2644 next if $test !~ /^\d{4}$/;
2645 next if $test < $test_start || $test > $test_end;
2646 push @test_list, "$testdir/$test";
2650 print ">>Test List: @test_list\n", if $debug;
2653 ##################################################
2654 # Munge variable auxiliary data #
2655 ##################################################
2657 # Some of the auxiliary data files have to refer to the current testing
2658 # directory and other parameter data. The generic versions of these files are
2659 # stored in the aux-var-src directory. At this point, we copy each of them
2660 # to the aux-var directory, making appropriate substitutions. There aren't very
2661 # many of them, so it's easiest just to do this every time. Ensure the mode
2662 # is standardized, as this path is used as a test for the ${stat: expansion.
2664 # A similar job has to be done for the files in the dnszones-src directory, to
2665 # make the fake DNS zones for testing. Most of the zone files are copied to
2666 # files of the same name, but db.ipv4.V4NET and db.ipv6.V6NET use the testing
2667 # networks that are defined by parameter.
2669 foreach $basedir ("aux-var", "dnszones")
2671 system("sudo rm -rf $parm_cwd/$basedir");
2672 mkdir("$parm_cwd/$basedir", 0777);
2673 chmod(0755, "$parm_cwd/$basedir");
2675 opendir(AUX, "$parm_cwd/$basedir-src") ||
2676 tests_exit(-1, "Failed to opendir $parm_cwd/$basedir-src: $!");
2677 my(@filelist) = readdir(AUX);
2680 foreach $file (@filelist)
2682 my($outfile) = $file;
2683 next if $file =~ /^\./;
2685 if ($file eq "db.ip4.V4NET")
2687 $outfile = "db.ip4.$parm_ipv4_test_net";
2689 elsif ($file eq "db.ip6.V6NET")
2691 my(@nibbles) = reverse(split /\s*/, $parm_ipv6_test_net);
2693 $outfile = "db.ip6.@nibbles";
2697 print ">>Copying $basedir-src/$file to $basedir/$outfile\n" if $debug;
2698 open(IN, "$parm_cwd/$basedir-src/$file") ||
2699 tests_exit(-1, "Failed to open $parm_cwd/$basedir-src/$file: $!");
2700 open(OUT, ">$parm_cwd/$basedir/$outfile") ||
2701 tests_exit(-1, "Failed to open $parm_cwd/$basedir/$outfile: $!");
2713 ##################################################
2714 # Create fake DNS zones for this host #
2715 ##################################################
2717 # There are fixed zone files for 127.0.0.1 and ::1, but we also want to be
2718 # sure that there are forward and reverse registrations for this host, using
2719 # its real IP addresses. Dynamically created zone files achieve this.
2721 if ($have_ipv4 || $have_ipv6)
2723 my($shortname,$domain) = $parm_hostname =~ /^([^.]+)(.*)/;
2724 open(OUT, ">$parm_cwd/dnszones/db$domain") ||
2725 tests_exit(-1, "Failed to open $parm_cwd/dnszones/db$domain: $!");
2726 print OUT "; This is a dynamically constructed fake zone file.\n" .
2727 "; The following line causes fakens to return PASS_ON\n" .
2728 "; for queries that it cannot answer\n\n" .
2729 "PASS ON NOT FOUND\n\n";
2730 print OUT "$shortname A $parm_ipv4\n" if $have_ipv4;
2731 print OUT "$shortname AAAA $parm_ipv6\n" if $have_ipv6;
2732 print OUT "\n; End\n";
2736 if ($have_ipv4 && $parm_ipv4 ne "127.0.0.1")
2738 my(@components) = $parm_ipv4 =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)/;
2739 open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||
2741 "Failed to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
2742 print OUT "; This is a dynamically constructed fake zone file.\n" .
2743 "; The zone is $components[0].in-addr.arpa.\n\n" .
2744 "$components[3].$components[2].$components[1] PTR $parm_hostname.\n\n" .
2749 if ($have_ipv6 && $parm_ipv6 ne "::1")
2751 my(@components) = split /:/, $parm_ipv6;
2752 my(@nibbles) = reverse (split /\s*/, shift @components);
2756 open(OUT, ">$parm_cwd/dnszones/db.ip6.@nibbles") ||
2758 "Failed to open $parm_cwd/dnszones/db.ip6.@nibbles: $!");
2759 print OUT "; This is a dynamically constructed fake zone file.\n" .
2760 "; The zone is @nibbles.ip6.arpa.\n\n";
2762 @components = reverse @components;
2763 foreach $c (@components)
2765 $c = "0$c" until $c =~ /^..../;
2766 @nibbles = reverse(split /\s*/, $c);
2767 print OUT "$sep@nibbles";
2771 print OUT " PTR $parm_hostname.\n\n; End\n";
2778 ##################################################
2779 # Create lists of mailboxes and message logs #
2780 ##################################################
2782 # We use these lists to check that a test has created the expected files. It
2783 # should be faster than looking for the file each time. For mailboxes, we have
2784 # to scan a complete subtree, in order to handle maildirs. For msglogs, there
2785 # is just a flat list of files.
2787 @oldmails = list_files_below("mail");
2788 opendir(DIR, "msglog") || tests_exit(-1, "Failed to opendir msglog: $!");
2789 @oldmsglogs = readdir(DIR);
2794 ##################################################
2795 # Run the required tests #
2796 ##################################################
2798 # Each test script contains a number of tests, separated by a line that
2799 # contains ****. We open input from the terminal so that we can read responses
2802 open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
2804 print "\nPress RETURN to run the tests: ";
2810 foreach $test (@test_list)
2813 local($commandno) = 0;
2814 local($subtestno) = 0;
2815 local($testno) = substr($test, -4);
2816 local($sortlog) = 0;
2820 my($thistestdir) = substr($test, 0, -5);
2822 if ($lasttestdir ne $thistestdir)
2825 if (-s "scripts/$thistestdir/REQUIRES")
2828 print "\n>>> The following tests require: ";
2829 open(IN, "scripts/$thistestdir/REQUIRES") ||
2830 tests_exit(-1, "Failed to open scripts/$thistestdir/REQUIRES: $1");
2833 $gnutls = 1 if /^support GnuTLS/;
2840 $lasttestdir = $thistestdir;
2842 # Remove any debris in the spool directory and the test-mail directory
2843 # and also the files for collecting stdout and stderr. Then put back
2844 # the test-mail directory for appendfile deliveries.
2846 system "sudo /bin/rm -rf spool test-*";
2847 system "mkdir test-mail 2>/dev/null";
2849 # A privileged Exim will normally make its own spool directory, but some of
2850 # the tests run in unprivileged modes that don't always work if the spool
2851 # directory isn't already there. What is more, we want anybody to be able
2852 # to read it in order to find the daemon's pid.
2854 system "mkdir spool; " .
2855 "sudo chown $parm_eximuser:$parm_eximgroup spool; " .
2856 "sudo chmod 0755 spool";
2858 # Empty the cache that keeps track of things like message id mappings, and
2859 # set up the initial sequence strings.
2871 # Remove the associative arrays used to hold checked mail files and msglogs
2873 undef %expected_mails;
2874 undef %expected_msglogs;
2876 # Open the test's script
2878 open(SCRIPT, "scripts/$test") ||
2879 tests_exit(-1, "Failed to open \"scripts/$test\": $!");
2881 # The first line in the script must be a comment that is used to identify
2882 # the set of tests as a whole.
2886 tests_exit(-1, "Missing identifying comment at start of $test") if (!/^#/);
2887 printf("%s %s", (substr $test, 5), (substr $_, 2));
2889 # Loop for each of the subtests within the script. The variable $server_pid
2890 # is used to remember the pid of a "server" process, for which we do not
2891 # wait until we have waited for a subsequent command.
2893 local($server_pid) = 0;
2894 for ($commandno = 1; !eof SCRIPT; $commandno++)
2896 # Skip further leading comments and blank lines, handle the flag setting
2897 # commands, and deal with tests for IP support.
2902 if (/^no_message_check/) { $message_skip = 1; next; }
2903 if (/^no_msglog_check/) { $msglog_skip = 1; next; }
2904 if (/^no_stderr_check/) { $stderr_skip = 1; next; }
2905 if (/^no_stdout_check/) { $stdout_skip = 1; next; }
2906 if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
2907 if (/^sortlog/) { $sortlog = 1; next; }
2909 if (/^need_largefiles/)
2911 next if $have_largefiles;
2912 print ">>> Large file support is needed for test $testno, but is not available: skipping\n";
2913 $docheck = 0; # don't check output
2914 undef $_; # pretend EOF
2921 print ">>> IPv4 is needed for test $testno, but is not available: skipping\n";
2922 $docheck = 0; # don't check output
2923 undef $_; # pretend EOF
2934 print ">>> IPv6 is needed for test $testno, but is not available: skipping\n";
2935 $docheck = 0; # don't check output
2936 undef $_; # pretend EOF
2940 if (/^need_move_frozen_messages/)
2942 next if defined $parm_support{"move_frozen_messages"};
2943 print ">>> move frozen message support is needed for test $testno, " .
2944 "but is not\n>>> available: skipping\n";
2945 $docheck = 0; # don't check output
2946 undef $_; # pretend EOF
2950 last unless /^(#|\s*$)/;
2952 last if !defined $_; # Hit EOF
2954 my($subtest_startline) = $lineno;
2956 # Now run the command. The function returns 0 if exim was run and waited
2957 # for, 1 if any other command was run and waited for, and 2 if a command
2958 # was run and not waited for (usually a daemon or server startup).
2960 my($commandname) = "";
2962 my($rc) = run_command($testno, \$subtestno, \$expectrc, \$commandname);
2965 print ">> rc=$rc cmdrc=$cmdrc\n" if $debug;
2967 # Hit EOF after an initial return code number
2969 tests_exit(-1, "Unexpected EOF in script") if ($rc == 4);
2971 # Carry on with the next command if we did not wait for this one. $rc == 0
2972 # if no subprocess was run; $rc == 3 if we started a process but did not
2975 next if ($rc == 0 || $rc == 3);
2977 # We ran and waited for a command. Check for the expected result unless
2980 if ($cmdrc != $expectrc && !$sigpipehappened)
2982 printf("** Command $commandno (\"$commandname\", starting at line $subtest_startline)\n");
2983 if (($cmdrc & 0xff) == 0)
2985 printf("** Return code %d (expected %d)", $cmdrc/256, $expectrc/256);
2987 elsif (($cmdrc & 0xff00) == 0)
2988 { printf("** Killed by signal %d", $cmdrc & 255); }
2990 { printf("** Status %x", $cmdrc); }
2994 print "\nshow stdErr, show stdOut, Continue (without file comparison), or Quit? [Q] ";
2996 tests_exit(1) if /^q?$/i;
3000 system("$more test-stderr");
3004 system("$more test-stdout");
3011 # If the command was exim, and a listening server is running, we can now
3012 # close its input, which causes us to wait for it to finish, which is why
3013 # we didn't close it earlier.
3015 if ($rc == 2 && $server_pid != 0)
3021 if (($? & 0xff) == 0)
3022 { printf("Server return code %d", $?/256); }
3023 elsif (($? & 0xff00) == 0)
3024 { printf("Server killed by signal %d", $? & 255); }
3026 { printf("Server status %x", $?); }
3030 print "\nShow server stdout, Continue, or Quit? [Q] ";
3032 tests_exit(1) if /^q?$/i;
3037 open(S, "test-stdout-server") ||
3038 tests_exit(-1, "Failed to open test-stdout-server: $!");
3049 # The script has finished. Check the all the output that was generated. The
3050 # function returns 0 if all is well, 1 if we should rerun the test (the files
3051 # have been updated). It does not return if the user responds Q to a prompt.
3055 if (check_output() != 0)
3057 print (("#" x 79) . "\n");
3062 print (" Script completed\n");
3068 ##################################################
3069 # Exit from the test script #
3070 ##################################################
3072 tests_exit(-1, "No runnable tests selected") if @test_list == 0;
3075 # End of runtest script