4 This file contains complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.72.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_localhost boolean false smtp 1.73
82 allow_mx_to_ip boolean false main 3.14
83 allow_symlink boolean false appendfile
84 allow_utf8_domains boolean false main 4.14
85 arc_sign string* unset smtp 4.91 with Experimental_ARC
86 auth_advertise_hosts host list "*" main 4.00
87 authenticated_sender string* unset smtp 4.14
88 authenticated_sender_force boolean false smtp 4.61
89 authenticate_hosts host list unset smtp 3.13
90 auto_thaw time 0s main
91 av_scanner string* + main 4.50 with content scan
92 batch_id string unset appendfile 4.00
95 batch_max integer 100 appendfile
98 bcc string* unset autoreply
99 bi_command string unset main
100 body_only boolean false transports 2.05
101 bounce_message_file string unset main 4.00
102 bounce_message_text string unset main 4.00
103 bounce_return_body boolean true main 4.23
104 bounce_return_message boolean true main 4.00
105 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
106 bounce_sender_authentication string unset main 4.00
107 callout_domain_negative_expire time 3h main 4.11
108 callout_domain_positive_expire time 7d main 4.11
109 callout_negative_expire time 2h main 4.11
110 callout_positive_expire time 24h main 4.11
111 callout_random_local_part string* + main 4.11
112 cannot_route_message string* unset routers 4.11
113 caseful_local_part boolean false routers 4.00
114 cc string* unset autoreply
115 check_ancestor boolean false redirect 4.00
116 check_group boolean false appendfile
118 check_local_user boolean false routers 4.00
119 check_log_inodes integer 0 main
120 check_log_space integer 0 main
121 check_owner boolean true appendfile 3.14
123 check_rfc2047_length boolean true main 4.60
124 check_secondary_mx boolean false dnslookup 4.00
125 check_spool_inodes integer 0 main
126 check_spool_space integer 0 main
127 check_string string "From " appendfile 3.03
129 check_srv string* unset dnslookup 4.31
130 client_condition string* unset authenticators 4.68
131 client_ignore_invalid_base64 boolean false plaintext 4.61
132 client_name string* + cram_md5 3.10
133 client_secret string* unset cram_md5 3.10
134 client_send string* unset plaintext 3.10
135 command string* unset lmtp 3.20
137 unset queryprogram 4.00
138 command_group string unset queryprogram 4.00
139 command_timeout time 5m smtp
140 command_user string unset queryprogram 4.00
141 commandline_checks_require_admin boolean false main 4.90
142 condition string* unset routers 4.00
143 connect_timeout time 0s smtp 1.60
144 connection_max_messages integer 500 smtp 4.00 replaces batch_max
145 create_directory boolean true appendfile
146 create_file string "anywhere" appendfile
147 current_directory string unset transports 4.00
148 unset queryprogram 4.00
149 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
150 daemon_startup_retries int 9 main 4.52
151 daemon_startup_sleep time 30s main 4.52
152 dane_require_tls_ciphers string* unset smtp 4.91
153 data string unset redirect 4.00
154 data_timeout time 5m smtp
155 debug_print string* unset authenticators 4.00
157 unset transports 2.00
158 debug_store boolean false main 4.90
159 delay_after_cutoff boolean true smtp
160 delay_warning time list 24h main
161 delay_warning_condition string* + main 1.73
162 deliver_drop_privilege boolean false main 4.00
163 deliver_queue_load_max fixed-point unset main 1.70
164 delivery_date_add boolean false transports
165 delivery_date_remove boolean true main
166 dkim_canon string* unset smtp 4.70
167 dkim_domain string list* unset smtp 4.72
168 dkim_private_key string* unset smtp 4.70
169 dkim_selector string* unset smtp 4.70
170 dkim_sign_headers string* (RFC4871) smtp 4.70
171 dkim_strict string* unset smtp 4.70
172 dkim_verify_signers string* $dkim_signers main 4.70
173 directory string* unset appendfile
174 directory_file string* + appendfile
175 directory_mode octal-integer 0700 appendfile
176 directory_transport string* unset redirect 4.00
177 disable_ipv6 boolean false main 4.61
178 disable_logging boolean false routers 4.11
179 false transports 4.11
180 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc
181 dmarc_history_file string unset main 4.82 if experimental_dmarc
182 dmarc_tld_file string unset main 4.82 if experimental_dmarc
183 dns_again_means_nonexist domain list unset main 1.89
184 dns_check_names_pattern string + main 2.11
185 dns_csa_search_limit integer 5 main 4.60
186 dns_csa_use_reverse boolean true main 4.60
187 dns_dnssec_ok integer -1 main 4.82
188 dns_dane_ok integer -1 main 4.83
189 dns_ipv4_lookup boolean false main 3.20
190 dns_qualify_single boolean true smtp
191 dns_retrans time 0s main 1.60
192 dns_retry integer 0 main 1.60
193 dns_search_parents boolean false smtp
194 dns_use_edns0 integer -1 main 4.76
195 domains domain list unset routers 4.00
196 driver string unset authenticators
199 drop_cr boolean false main 4.00 became a no-op in 4.21
200 dscp string unset smtp 4.82
201 dsn_from string* + main 4.67
202 envelope_to_add boolean false transports
203 envelope_to_remove boolean true main
204 environment string* unset pipe 2.95
205 errors_copy string list* unset main
206 errors_reply_to string unset main
207 errors_to string* unset routers 4.00
208 escape_string string ">From " appendfile 3.03
210 exim_group string ++ main
211 exim_path string ++ main
212 exim_user string ++ main
213 expn boolean true routers
214 extra_local_interfaces string unset main 4.21
215 extract_addresses_remove_arguments boolean true main 1.92
216 fail_verify boolean false routers
217 fail_verify_recipient boolean false routers 4.00
218 fail_verify_sender boolean false routers 4.00
219 fallback_hosts string list unset routers 4.00
221 file string* unset appendfile
224 file_expand boolean false autoreply
225 file_format string unset appendfile 3.03
226 file_must_exist boolean false appendfile
227 file_optional boolean false autoreply
228 file_transport string* unset redirect 4.00
229 filter_prepend_home boolean true redirect 4.63
230 final_timeout time 10m smtp
231 finduser_retries integer 0 main
232 forbid_blackhole boolean false redirect 4.00
233 forbid_exim_filter boolean false redirect 4.44
234 forbid_fail boolean false redirect 4.00
235 forbid_file boolean false redirect 4.00
236 forbid_filter_existstest boolean false redirect 4.00
237 forbid_filter_logwrite boolean false redirect 4.00
238 forbid_filter_lookup boolean false redirect 4.00
239 forbid_filter_perl boolean false redirect 4.00
240 forbid_filter_readfile boolean false redirect 4.00
241 forbid_filter_readsocket boolean false redirect 4.11
242 forbid_filter_reply boolean false redirect 4.00
243 forbid_filter_run boolean false redirect 4.00
244 forbid_include boolean false redirect 4.00
245 forbid_pipe boolean false redirect 4.00
246 forbid_sieve_filter boolean false redirect 4.44
247 forbid_smtp_code boolean false redirect 4.63
248 force_command boolean false pipe 4.82
249 freeze_exec_fail boolean false pipe 1.89
250 freeze_signal boolean false pipe 4.75
251 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
252 from string* unset autoreply
253 gecos_name string* unset main
254 gecos_pattern string unset main
255 gethostbyname boolean false smtp
256 gnutls_allow_auto_pkcs11 boolean false main 4.82
257 gnutls_compat_mode boolean unset main 4.70
258 gnutls_require_kx string* unset main 4.67 deprecated, warns
259 string* unset smtp 4.67 deprecated, warns
260 gnutls_require_mac string* unset main 4.67 deprecated, warns
261 string* unset smtp 4.67 deprecated, warns
262 gnutls_require_protocols string* unset main 4.67 deprecated, warns
263 string* unset smtp 4.67 deprecated, warns
264 group string + routers 4.00
265 unset transports 4.00 replaces local option in some transports
266 header_line_maxsize integer 0 (unset) main 4.14
267 header_maxsize integer 1M main 4.14
268 headers string* unset autoreply
269 headers_add string* unset routers 4.00
271 headers_charset string ++ main 4.21
272 headers_only boolean false transports 2.05
273 headers_remove string* unset routers 4.00
275 headers_rewrite string unset transports 3.20
276 helo_accept_junk_hosts host list unset main 3.00
277 helo_allow_chars string "" main 4.02
278 helo_lookup_domains domain list unset main 4.00
279 helo_data string* "$primary_hostname" smtp 3.21
280 helo_try_verify_hosts host list unset main 4.00
281 helo_verify_hosts host list unset main 1.73
282 hide_child_in_errmsg false redirect 4.00
283 hold_domains domain list unset main 1.70
284 home_directory string* unset transports 4.00 replaces individual options
285 host_all_ignored string "defer" manualroute 4.67
286 host_find_failed string "freeze" manualroute 4.00
287 host_lookup host list unset main 3.00
288 host_lookup_order string list "bydns:byaddr" main 4.30
289 host_reject_connection host list unset main 4.00
290 hosts string unset iplookup 4.00
291 string list* unset smtp
292 hosts_avoid_esmtp host list unset smtp 4.21
293 hosts_avoid_pipelining host list unset smtp 4.67
294 hosts_avoid_tls host list unset smtp 3.20
295 hosts_connection_nolog host list unset main 4.43
296 hosts_max_try integer 5 smtp 3.20
297 hosts_max_try_hardlimit integer 50 smtp 4.50
298 hosts_nopass_tls host list unset smtp 4.00
299 hosts_noproxy_tls host list "*" smtp 4.90
300 hosts_override boolean false smtp 2.11
301 hosts_randomize boolean false manualroute 4.00
303 hosts_require_auth host list unset smtp 4.00
304 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
305 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
306 hosts_require_tls host list unset smtp 3.20
307 hosts_treat_as_local domain list unset main 1.95
308 hosts_try_auth host list unset smtp 4.00
309 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
310 hosts_try_fastopen host list unset smtp 4.88
311 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
312 ibase_servers string unset main 4.23
313 ignore_bounce_errors_after time 0s main 4.00
314 ignore_eacces boolean false redirect 4.00
315 ignore_enotdir boolean false redirect 4.00
316 ignore_fromline_hosts host list unset main
317 ignore_fromline_local boolean false main 2.05
318 ignore_status boolean false pipe
319 ignore_target_hosts host list unset routers 4.00
320 include_directory string unset redirect 4.00
321 initgroups false routers 4.00
322 interface string list unset smtp 1.70
323 keep_malformed time 4d main
324 keepalive boolean true smtp 2.05
325 ldap_default_servers string list unset main 3.02
326 ldap_version int 2 or 3 main 4.14
327 local_from_check boolean true main 3.14
328 local_from_prefix string unset main 3.14
329 local_from_suffix string unset main 3.14
330 local_interfaces string list unset main 1.60
331 local_part_prefix string unset routers 4.00 replaces prefix
332 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
333 local_part_suffix string unset routers 4.00 replaces suffix
334 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
335 local_parts string list* unset routers 4.00
336 local_scan_timeout time 5m main 4.03
337 local_sender_retain boolean false main 4.00
338 localhost_number string unset main
339 lock_fcntl_timeout time 0s appendfile 3.14
340 lock_flock_timeout time 0s appendfile 4.11
341 lock_interval time 3s appendfile
342 lock_retries integer 10 appendfile
343 lockfile_mode octal-integer 0600 appendfile
344 lockfile_timeout time 30m appendfile
345 log string* unset autoreply
346 log_as_local boolean + routers 4.00
347 log_file_path string list ++ main
348 log_defer_output boolean false pipe 1.89
349 log_fail_output boolean false pipe 1.60
350 log_output boolean false pipe 1.60
351 log_selector string unset main 4.00
352 log_timezone boolean false main 4.11
353 lookup_open_max integer 25 main 2.05
354 mailbox_filecount string* unset appendfile 4.43
355 mailbox_size string* unset appendfile 4.43
356 maildir_format boolean false appendfile 1.70
357 maildir_retries integer 10 appendfile 1.70
358 maildir_tag string* unset appendfile 1.92
359 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
360 maildirfolder_create_regex string unset appendfile 4.62
361 mailstore_format boolean false appendfile 2.00
362 mailstore_prefix string* unset appendfile 2.00
363 mailstore_suffix string* unset appendfile 2.00
364 match_directory string* unset localuser
365 max_output integer 20K pipe
366 max_rcpt integer 100 smtp 1.60
367 max_user_name_length integer 0 main
368 mbx_format boolean false appendfile 2.10
369 message_body_newlines boolean false main 4.68
370 message_body_visible integer 500 main
371 message_id_header_domain string* unset main 4.11
372 message_id_header_text string* unset main
373 message_logs boolean true main 4.10
374 message_prefix string* + appendfile 4.00 replaces prefix
375 string* unset pipe 4.00 replaces prefix
376 message_size_limit integer 50M main
378 message_suffix string* + appendfile 4.00 replaces suffix
379 string* unset pipe 4.00 replaces suffix
380 mode octal-integer 0600 appendfile
382 mode_fail_narrower boolean true appendfile 1.70
383 modemask octal-integer 022 redirect 4.00
384 more boolean true routers 4.00
385 move_frozen_messages boolean false main 3.09
386 multi_domain boolean true smtp
387 mx_domains domain list unset dnslookup 4.00
388 mx_fail_domains domain list unset dnslookup 4.43
389 mysql_servers string list unset main 3.03
390 never_users string list unset main
391 notify_comsat boolean false appendfile
392 once string* unset autoreply
393 once_file_size integer 0 autoreply 3.20
394 once_repeat time 0s autoreply 2.95
395 one_time boolean false redirect 4.00
396 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
397 optional boolean false iplookup 4.00
398 oracle_servers string unset main 4.00
399 owners string list unset redirect 4.00
400 owngroups string list unset redirect 4.00
401 pass_on_timeout boolean false routers 4.00
402 pass_router string unset routers 4.00
403 path string "/usr/bin" pipe
404 percent_hack_domains domain list unset main
405 perl_at_start boolean false main 2.10
406 perl_startup string unset main 2.10
407 permit_coredump boolean false pipe 4.73
408 pgsql_servers string list unset main 3.14
409 pid_file_path string ++ main
410 pipe_as_creator boolean false pipe
411 pipe_transport string* unset redirect 4.00
412 pipelining_advertise_hosts host list "*" main 4.14
413 port integer 0 iplookup 4.00
415 preserve_message_logs boolean false main
416 prdr_enable boolean false main 4.82 if experimental_prdr
417 primary_hostname string + main
418 print_topbitchars boolean false main 1.89
419 process_log_path string unset main 4.21
420 prod_requires_admin boolean true main 1.70
421 protocol string "udp" iplookup 4.00
422 string "smtp" smtp 3.20
423 public_name string unset authenticators 3.10
424 qualify_domain string + main
425 string* unset redirect 4.31
426 qualify_preserve_domain boolean false redirect 4.00
427 qualify_recipient string + main
428 qualify_single boolean true dnslookup 4.00
429 query string* + iplookup 4.00
430 queue_domains domain list unset main 4.00
431 queue_list_requires_admin boolean true main 1.95
432 queue_only boolean false main
433 queue_only_file string unset main 2.05
434 queue_only_load fixed-point unset main
435 queue_only_load_latch boolean true main 4.68
436 queue_only_override boolean true main 4.21
437 queue_run_in_order boolean false main 1.70
438 queue_run_max integer 5 main
439 queue_smtp_domains domain list unset main
440 quota string* unset appendfile 1.60
441 quota_directory string* unset appendfile 4.11
442 quota_filecount integer 0 appendfile 2.05
443 quota_is_inclusive boolean true appendfile 3.20
444 quota_size_regex string unset appendfile 3.14
445 quota_warn_message string* + appendfile 2.10
446 quota_warn_threshold string* 0 appendfile 2.10
447 rcpt_include_affixes boolean false transports 4.21
448 receive_timeout time 0s main 4.00 replacing accept_timeout
449 received_header_text string* + main
450 received_headers_max integer 30 main
451 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
452 recipients_max integer 0 main 1.60
453 recipients_max_reject boolean false main 1.70
454 redirect_router string unset routers 4.00
455 remote_max_parallel integer 1 main
456 remote_sort_domains domain list unset main 4.00 replacing remote_sort
457 repeat_use boolean true redirect 4.00
458 reply_to string* unset autoreply 2.05
459 reply_transport string* unset redirect 4.00
460 require_files string list* unset routers 4.00
461 reroute string* unset iplookup 4.00
462 response_pattern string unset iplookup 4.00
463 restrict_to_path boolean false pipe
464 retry_data_expire time 7d main 3.03
465 retry_include_ip_address boolean true smtp 1.92
466 retry_interval_max time 24h main
467 retry_use_local_part boolean + routers 4.00
468 + transports 4.00 replacing individual options
469 return_fail_output boolean false pipe 1.60
470 return_message boolean false autoreply
471 return_output boolean false pipe
472 return_path string* unset transports 2.05
473 return_path_add boolean false transports
474 return_path_remove boolean true main
475 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
476 rewrite boolean true redirect 4.00
477 rewrite_headers boolean true dnslookup 4.00
478 rfc1413_hosts host list * main
479 rfc1413_query_timeout time 5s main
480 router_home_directory string* unset routers 4.11
481 route_data string* unset manualroute 4.00
482 route_list string list unset manualroute 4.00
483 same_domain_copy_routing boolean false dnslookup 4.00
484 search_parents boolean false dnslookup 4.00
485 self string "freeze" routers 4.00
486 sender_unqualified_hosts host list unset main
487 senders address list unset routers 4.00
488 serialize_hosts host list unset smtp 1.60
489 server_advertise_condition string* unset authenticators 4.14
490 server_channelbinding bool false gsasl 4.80
491 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
492 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
493 server_keytab string* unset heimdal_gssapi 4.80
494 server_mail_auth_condition string* unset authenticators 3.22
495 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
496 server_password string unset gsasl 4.80
497 server_prompts string* unset plaintext 3.10
498 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
499 server_scram_iter string* unset gsasl 4.80
500 server_scram_salt string* unset gsasl 4.80
501 server_secret string* unset cram_md5 3.10
502 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
503 server_set_id string* unset authenticators 3.10
504 shadow_condition string* unset transports
505 shadow_transport string unset transports
506 size_addition integer 1024 smtp 1.91
507 skip_syntax_errors boolean false redirect 4.00
508 smtp_accept_keepalive boolean true main
509 smtp_accept_max integer 20 main
510 smtp_accept_max_nonmail integer 10 main 4.11
511 smtp_accept_max_nonmail_hosts host list * main 4.14
512 smtp_accept_max_per_connection integer 1000 main 4.00
513 smtp_accept_max_per_host integer 0 main 2.05
514 smtp_accept_queue integer 0 main
515 smtp_accept_queue_per_connection integer 10 main 2.03
516 smtp_accept_reserve integer 0 main
517 smtp_active_hostname string* unset main 4.33
518 smtp_banner string* + main
519 smtp_check_spool_space boolean true main 2.10
520 smtp_connect_backlog integer 5 main
521 smtp_enforce_sync boolean true main 4.00
522 smtp_etrn_command string* unset main 1.92
523 smtp_etrn_serialize boolean true main 1.89
524 smtp_load_reserve fixed-point unset main
525 smtp_max_synprot_errors integer 3 main 4.30
526 smtp_max_unknown_commands integer 3 main 4.14
527 smtp_ratelimit_hosts host list unset main 4.00
528 smtp_ratelimit_mail string unset main 4.00
529 smtp_ratelimit_rcpt string unset main 4.00
530 smtp_receive_timeout time 5m main
531 smtp_reserve_hosts host list unset main
532 smtp_return_error_details boolean false main 4.11
533 socket string* unset lmtp 4.11
534 spamd_address string* + main 4.50 with content scan
535 split_spool_directory boolean false main 1.70
536 spool_directory string ++ main
537 spool_wireformat boolean false main 4.90
538 sqlite_lock_timeout time 5s main 4.53
539 strict_acl_vars boolean false main 4.64
540 srv_fail_domains domain list unset dnslookup 4.43
541 strip_excess_angle_brackets boolean false main
542 strip_trailing_dot boolean false main
543 subject string* unset autoreply
544 syntax_errors_text string* unset redirect 4.00
545 syntax_errors_to string unset redirect 4.00
546 syslog_duplication boolean true main 4.21
547 syslog_facility string unset main 4.20
548 syslog_processname string "exim" main 4.20
549 syslog_timestamp boolean true main 4.00
550 system_filter string unset main 4.00 replacing message_filter
551 system_filter_directory_transport string unset main 4.00 replacing message_filter
552 system_filter_file_transport string unset main 4.00 replacing message_filter
553 system_filter_group string unset main 4.00 replacing message_filter
554 system_filter_pipe_transport string unset main 4.00 replacing message_filter
555 system_filter_reply_transport string unset main 4.00 replacing message_filter
556 system_filter_user string unset main 4.00 replacing message_filter
557 tcp_nodelay boolean true main 4.23
559 tcp_wrappers_daemon_name string* ++ main 4.73
560 temp_errors string list + pipe 1.95
561 text string* unset autoreply
562 timeout time 5m lmtp 3.20
566 timeout_defer boolean false pipe 4.51
567 timeout_frozen_after time 0s main 3.20
568 timezone string + main 3.15
569 tls_advertise_hosts host list * main 3.20
570 tls_certificate string* unset main 3.20
572 tls_dh_max_bits integer 2236 main 4.80
573 tls_dh_min_bits integer 1024 smtp 4.82
574 tls_dhparam string* unset main 3.20
575 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
576 tls_on_connect_ports string unset main 4.43
577 tls_privatekey string* unset main 3.20
579 tls_remember_emstp boolean false main 4.21
580 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
581 string* unset main 4.33
582 tls_sni string* unset main 4.80
583 tls_tempfail_tryclear boolean true smtp 4.05
584 tls_try_verify_hosts host list unset main 4.00
585 tls_verify_certificates string* unset main 3.20
587 tls_verify_hosts host list unset main 3.20
588 to string* unset autoreply
589 translate_ip_address string unset routers 4.00
590 transport string* unset routers 4.00
591 transport_current_directory string unset routers 4.00
592 transport_home_directory string unset routers 4.00
593 transport_filter string unset transports
594 transport_filter_timeout time 5m transports 4.30
595 trusted_groups string list unset main
596 trusted_users string list unset main
597 umask octal-integer 022 pipe
598 unknown_login string unset main
599 unknown_username string unset main
600 unseen boolean false routers 4.00
601 untrusted_set_sender boolean false main 3.20
602 use_bsmtp boolean false appendfile 4.00
604 use_crlf boolean false appendfile 1.89
606 use_fcntl_lock boolean + appendfile 1.70
607 use_flock_lock boolean + appendfile 4.11
608 use_lockfile boolean + appendfile
609 use_mbx_lock boolean + appendfile 2.10
610 use_shell boolean false pipe 1.70
611 user string + routers 4.00
612 unset transports 4.00 replaces individual options
613 uucp_from_pattern string + main 1.75
614 uucp_from_sender string* "$1" main 1.75
615 verify boolean true routers 4.00
616 verify_only boolean false routers 4.00
617 verify_recipient boolean true routers 4.00
618 verify_sender boolean true routers 4.00
619 warn_message_file string unset main 4.00
620 widen_domains string list unset dnslookup 4.00
621 write_rejectlog boolean true main 4.31
625 2. COMMAND LINE OPTIONS
626 -----------------------
628 The table below contains a complete list of all Exim's command line options.
629 Those marked with # are available only to trusted users, those marked with +
630 are available only to admin users, and those marked with * exist only to
631 provide compatibility with Sendmail.
634 --help Give a little help (not a lot)
635 --version Give version information (alias for -bV)
638 -bdf + Start daemon and run it in the foreground
639 -be Test string expansion
640 -bem Test string expansion, read test message first
641 -bF Test system filter file
642 -bf Test user filter file
643 -bfd Set domain for filter testing
644 -bfl Set local part for filter testing
645 -bfp Set local part prefix for filter testing
646 -bfs Set local part suffix for filter testing
647 -bh Test incoming SMTP call, omitting callouts
648 -bhc Test incoming SMTP call, with callouts
649 -bi * Run <command>bi_command</command>
650 -bI:help Show list of accepted -bI:<tag> options
651 -bm Accept message on standard input
652 -bmalware + Invoke configured malware scanning against supplied filename
653 -bnq Don't qualify addresses in locally submitted messages
654 -bP Show configuration option settings
656 -bpa + ... with generated addresses as well
657 -bpc + ... but just show a count of messages
658 -bpr + ... do not sort
659 -bpra + ... with generated addresses, unsorted
660 -bpru + ... only undelivered addresses, unsorted
661 -bpu + ... only undelivered addresses
662 -brt Test retry rules
663 -brw Test rewriting rules
664 -bS Read batch SMTP on standard input
665 -bs Run SMTP on standard input and output
666 -bt Test address directing and routing
667 -bV Verify version number
668 -bv Test recipient address verification
669 -bvs Test sender address verification
670 -bw + Inetd wait mode
671 -C + Use alternate configuration file
672 -D + Define macro for configuration file
673 -d + Turn on debugging output
674 -dd + Ditto, but if a daemon, not for subprocesses
675 -dropcr Remove CR character in input: became a no-op in 4.21
677 -ex * Synonym for -oex (for several different x)
678 -F Set calling user name
679 -f # Set calling user address
682 -i Dot does not terminate message
683 -M + Force deliver specific message
684 -Mar + Add recipient to message
685 -MC Internal use only
686 -MCA Internal use only
687 -MCP Internal use only
688 -MCQ Internal use only
689 -MCS Internal use only
690 -MCT Internal use only
691 -Mc + Deliver specific message
692 -Mes + Edit message sender
693 -Mf + Freeze message(s)
694 -Mg + Give up (bounce) message(s)
695 -Mmad + Mark all recipients delivered
696 -Mmd + Mark one recipient delivered
697 -Mrm + Remove message(s) (no bounce)
698 -Mset + Load message's variables when testing with -be
699 -Mt + Thaw message(s)
700 -Mvb + View message body
701 -Mvc + View entire message in RFC 2822 format
702 -Mvh + View message header
703 -Mvl + View message log
705 -N + Deliver without transporting
708 -oA * Supply argument for <option>-bi</option>
709 -oB Set max messages down one connection
710 -odb Background delivery
711 -odf Foreground delivery
712 -odi Foreground delivery
713 -odq Queue message; do not deliver
714 -odqs ... do not do SMTP deliveries
715 -oee Error sent by mail; zero return code
716 -oem Error sent by mail; non-zero return code
717 -oep Error written to standard error stream
718 -oeq * Error written to standard error stream
719 -oew * Error sent by mail; non-zero return code
720 -oi Dot does not terminate message
721 -oitrue * Dot does not terminate message
722 -oMa # Supply host address
723 -oMaa # Supply authenticator name
724 -oMai # Supply authenticated id
725 -oMas # Supply authenticated sender
726 -oMi # Supply interface address
727 -oMm # Supply message reference
728 -oMr # Supply protocol name
729 -oMs # Supply host name
730 -oMt # Supply ident string
733 -oP * Specify path for daemon's pid file
734 -or Timeout non-SMTP messages
735 -os Timeout for SMTP messages
736 -ov * Verbose; same as -v
737 -oX Alternative port for daemon
738 -pd Delay Perl interpreter start
739 -ps Do not delay Perl interpreter start
740 -p<r>:<s> * Same as -oMr <r> -oMs <s>
742 -qf + ... force delivery ) Other combinations are
743 -qff + ... and include frozen messages ) possible. The syntax is
744 -qi + ... initial deliveries only )
745 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
746 -qq + Two-stage queue run )
749 -R Select by recipient in queue run
751 -Rff ... and frozen messages
752 -Rr ... using regular expression
753 -Rrf ... with forcing
754 -Rrff ... and frozen messages
756 -S Select by sender in queue run
758 -Sff ... and frozen messages
759 -Sr ... using regular expression
760 -Srf ... with forcing
761 -Srff ... and frozen messages
762 -Tqt * Used by Exim test suite; not recognized in normal use
763 -t Take recipients from header lines
765 -tls-on-connect Do TLS on startup (for legacy clients)
767 -v Verbose - shows SMTP dialogue and other delivery info
768 -x Ignored (AIX compatibility)
771 3. BUILD TIME OPTIONS FOR EXIM
772 ------------------------------
774 The table below contains a "mostly" complete list of options that can be
775 set in Local/Makefile when building Exim. The only items not included are
776 those whose names can be trivially derived from rules stated below.
778 More information about individual options can be found in src/EDITME and
781 The second column below gives the type of option:
783 . `system' means the option is concerned with the operating system;
785 . `driver' means the option selects a driver to be included in the binary;
787 . `lookup' means the option selects a lookuptype to be included in the binary;
789 . `mandatory' means the option is required to be supplied;
791 . `recommended' means the option is recommended to be supplied;
793 . `optional' means what it says;
795 Those marked with * are specialized and are unlikely to be required in most
796 installations. Those that are marked with ** are commonly set in OS-specific
797 Makefiles. If you use any of these in your Local/Makefile, you may need to
798 reproduce some of the OS-specific settings. For example, in the Makefile for
799 Solaris (which is actually called OS/Makefile-SunOS5), there is
801 LIBS=-lsocket -lnsl -lkstat
803 If you use LIBS to add extra libraries, you must also include the OS ones in
804 your setting. It is better, in this particular case, to use EXTRALIBS, which is
805 empty by default, and is provided for just this reason. Of course, if you do
806 actually want to modify a setting from the OS-specific file, there is nothing
807 to stop you overriding it in your Local/Makefile.
809 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
810 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
811 libraries specific only to that module. These rules are only used where the
812 relevant lookup is a module. These options are not explicitly listed below.
814 Variables with names endined `_PC' are used for pkg-config integration; setting
815 the value to the name of a pkg-config package will cause Exim's build system to
816 query the --cflags and --libs for the given name, when building anything
817 dependent upon the component associated with the `_PC' variable. For lookups,
818 if the lookup is dynamically loaded, then this *replaces* the use of the
819 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
820 is statically loaded into Exim, the results will be inserted into the
821 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
822 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
823 only listed below for the TLS implementation cases.
826 Option Type Description
827 ------------------------------------------------------------------------------
829 ALT_CONFIG_PREFIX optional restricts location of -C files
830 APPENDFILE_MODE optional*
831 APPENDFILE_DIRECTORY_MODE optional*
832 APPENDFILE_LOCKFILE_MODE optional*
833 AR system command to build a library
834 AUTH_CRAM_MD5 driver include cram_md5 authenticator
835 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
836 AUTH_GSASL driver include GNU SASL authenticator
837 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
838 AUTH_LIBS system library linkage for authenticators
839 AUTH_PLAINTEXT driver include plaintext authenticator
840 AUTH_SPA driver include SPA (NTLM) authenticator
841 AUTH_VARS=3 optional* number of $auth variables
842 BASENAME_COMMAND system** path to basename
843 BASE_62=62 optional* not normally changed for Unix
844 BIN_DIRECTORY mandatory Exim binary directory
845 CC system** C compiler
846 CFLAGS system** flags for C compiler
847 CFLAGS_DYNAMIC system** extra flags needed for .so modules
848 CHGRP_COMMAND system** path to chgrp
849 CHOWN_COMMAND system** path to chown
850 COMPRESS_COMMAND system path to a compress command
851 COMPRESS_SUFFIX system suffix added to compressed files
852 CONFIGURE_FILE mandatory Exim runtime configuration file
853 CONFIGURE_FILE_USE_EUID optional*
854 CONFIGURE_FILE_USE_NODE optional*
855 CONFIGURE_GROUP optional* alternate group for configuration file
856 CONFIGURE_OWNER optional* alternate owner for configuration file
857 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
858 DBMLIB optional** location of DBM library
859 DB_DIRECTORY_MODE optional* mode for hints directory
860 DB_LOCKFILE_MODE optional* mode for hints lock files
861 DB_LOCK_TIMEOUT optional* timeout for hints lock files
862 DB_MODE optional* mode for hints files
863 DEFAULT_CRYPT optional default crypt() function
864 DELIVER_IN_BUFFER_SIZE optional*
865 DELIVER_OUT_BUFFER_SIZE optional*
866 DISABLE_DKIM optional disables DKIM support
867 DISABLE_DNSSEC optional disables attempts to use DNSSEC
868 DISABLE_D_OPTION optional disables -D option
869 ERRNO_QUOTA optional* error code for system quota failures
870 EXICYCLOG_MAX optional number of old log files to keep
871 EXIMDB_DIRECTORY_MODE optional* for hints database directory
872 EXIMDB_LOCKFILE_MODE optional* for hints lock files
873 EXIMDB_MODE optional* mode for hints files
874 EXIMON_TEXTPOP system**
876 EXIM_GROUP mandatory group to use for Exim
877 EXIM_MONITOR optional set to eximon.bin to compile
879 EXIM_USER mandatory user to use for Exim
880 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
881 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
882 EXIWHAT_MULTIKILL_CMD system**
883 EXIWHAT_MULTIKILL_ARG system**
884 EXIWHAT_PS_ARG system** to list all processes
885 EXIWHAT_PS_CMD system** path to ps command
886 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
887 EXTRALIBS system additional libraries
888 EXTRALIBS_EXIM system additional libraries for Exim only
889 EXTRALIBS_EXIMON system additional libraries for the monitor
890 FIXED_NEVER_USERS optional can't override at runtime
891 HAVE_ICONV system the iconv() function is available
892 HAVE_IPV6 system include IPv6 support
893 HEADERS_CHARSET optional charset for decoded header lines
894 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
895 HEADER_MAXSIZE optional* max memory for message header
896 HOSTNAME_COMMAND system** path to hostname command
897 INCLUDE system path to include files
898 INFO_DIRECTORY optional directory for Info documentation
899 INPUT_DIRECTORY_MODE optional mode for input directory
900 IPV6_INCLUDE system additional includes for IPv6
901 IPV6_LIBS system additional libraries for IPv6
902 LDAP_LIB_TYPE optional type of LDAP library
903 LFLAGS system** link editor flags
904 LIBIDENTCFLAGS system C flags when compiling libident
905 LIBIDENTNAME system name for libident library
906 LIBRESOLV system** library for DNS resolver
907 LIBS system** additional libraries
908 LIBS_EXIM system** additional libraries for Exim ony
909 LIBS_EXIMON system** additional libraries for monitor
910 LOCAL_SCAN_SOURCE optional location of local_scan() source
911 LOG_DIRECTORY_MODE optional mode for log directory
912 LOG_FILE_PATH optional path to log files
913 LOG_MODE optional mode for log files
914 LOOKUP_CDB lookup include cdb lookup
915 LOOKUP_DBM lookup include dbm lookup
916 LOOKUP_DNSDB lookup include dnsdb lookup
917 LOOKUP_DSEARCH lookup include dsearch lookup
918 LOOKUP_INCLUDE lookup include files for lookups
919 LOOKUP_LDAP lookup include ldap lookup
920 LOOKUP_LIBS lookup include libraries for lookups
921 LOOKUP_LSEARCH lookup include all lsearch lookups
922 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
923 LOOKUP_MYSQL lookup include mysql lookup
924 LOOKUP_NIS lookup include nis lookup
925 LOOKUP_NISPLUS lookup include nisplus lookup
926 LOOKUP_ORACLE lookup include oracle lookup
927 LOOKUP_PGSQL lookup include pgsql lookup
928 LOOKUP_TESTDB lookup*
929 LOOKUP_WHOSON lookup include whoson lookup
930 LOOKUP_*_INCLUDE optional* include files for dynamic module
931 LOOKUP_*_LIBS optional* libraries for dynamic module
932 MAKE_SHELL optional* shell to use for make
933 MAX_FILTER_SIZE optional* max file size for filter files
934 MAX_INCLUDE_SIZE optional* max file size for :include: files
935 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
936 MAX_NAMED_LIST optional* max named lists of a given type
937 MAX_INTERFACES system maximum network interfaces
938 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
939 MV_COMMAND system path to mv command
940 NO_SYMLINK optional install doesn't make 'exim" symlink
941 PCRE_CONFIG system* use pcre-config for PCRE support
942 PCRE_LIBS system* library for using PCRE
943 PERL_CC system* compiler for Perl interface code
944 PERL_CCOPTS system* flags for same
945 PERL_COMMAND system path to Perl
946 PERL_LIBS system* library for compiling Perl interface
947 PID_FILE_PATH optional path to daemon's pid file
948 RADIUS_CONFIG_FILE optional path to Radius config file
949 RADIUS_LIB_TYPE optional type of RADIUS library
950 RANLIB system** path to ranlib command
951 RM_COMMAND system path to rm command
952 ROUTER_ACCEPT driver include accept router
953 ROUTER_DNSLOOKUP driver include dnslookup router
954 ROUTER_MANUALROUTE driver include manualroute router
955 ROUTER_IPLITERAL driver include ipliteral router
956 ROUTER_IPLOOKUP driver include iplookup router
957 ROUTER_REDIRECT driver include redirect router
958 ROUTER_QUERYPROGRAM driver include queryprogram router
959 SPOOL_DIRECTORY recommended path to spool directory
960 SPOOL_DIRECTORY_MODE optional mode of spool directory
961 SPOOL_MODE optional mode of spool files
962 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
963 STRIP_COMMAND optional* can be used to strp binaries
964 SUPPORT_A6 optional* support A6 DNS records
965 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
966 SUPPORT_MAILDIR optional support for maildir delivery
967 SUPPORT_MAILSTORE optional support for mailstore delivery
968 SUPPORT_MBX optional support for MBX delivery
969 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
970 SUPPORT_PAM optional support for PAM authentication
971 SUPPORT_TLS optional support for TLS encryption over SMTP
972 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
973 SYSLOG_LOG_PID optional add pid to syslog lines
974 SYSLOG_LONG_LINES optional do not split long syslog lines
975 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
976 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
977 TIMEZONE_DEFAULT optional default for timezone option
978 TLS_INCLUDE optional path to include files for TLS
979 TLS_LIBS optional additional libraries for TLS
980 EXIM_TMPDIR system value for TMPDIR environment variable
981 TRANSPORT_APPENDFILE driver include appendfile transport
982 TRANSPORT_AUTOREPLY driver include autoreply transport
983 TRANSPORT_LMTP driver include lmtp transport
984 TRANSPORT_PIPE driver include pipe transport
985 TRANSPORT_SMTP driver include smtp transport
986 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
987 USE_DB system** use native DB interface
988 USE_GNUTLS optional use GnuTLS instead of OpenSSL
989 USE_GNUTLS_PC optional probably "gnutls"
990 USE_OPENSSL_PC optional probably "openssl"
991 USE_READLINE optional try to load libreadline for -be
992 USE_TCP_WRAPPERS system link with tcpwrappers
993 USE_TDB optional use the tdb DB interface
994 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
995 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
996 X11 system** X11 base directory
997 X11_LD_LIB system** X11 link library
998 XINCLUDE system** X11 include directory
999 XLFLAGS system** X11 link time flags
1000 ZCAT_COMMAND system path to zcat command
1003 4. BUILD TIME OPTIONS FOR EXIMON
1004 --------------------------------
1006 The table below contains a complete list of options that can be set in
1007 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1008 ** it means that the text string is too long to fit in the table and is instead
1009 given below. A blank default means that there is no default value.
1011 ACTION_OUTPUT=no show output for every action
1012 ACTION_QUEUE_UPDATE=yes update queue display after actions
1013 BODY_MAX=20000 maximum body display
1014 DOMAIN= domain to strip from window title
1015 LOG_BUFFER=20K buffer for log tail
1016 LOG_DEPTH=300 depth of log subwindow
1017 LOG_FONT=** font for log display
1018 LOG_STRIPCHARTS=** patterns for stripcharts
1019 LOG_WIDTH=950 width of log subwindow
1020 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1021 MIN_HEIGHT=162 minimum window height
1022 MIN_WIDTH=103 minimum window width
1023 QUALIFY_DOMAIN= local domain to strip from addresses
1024 QUEUE_DEPTH=200 depth of queue subwindow
1025 QUEUE_FONT=$LOG_FONT font for queue display
1026 QUEUE_INTERVAL=300 queue refresh interval
1027 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1028 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1029 QUEUE_WIDTH=950 width of queue subwindow
1030 SIZE_STRIPCHART= request partition size stripchart
1031 SIZE_STRIPCHART_NAME=space name for size stripchart
1032 START_SMALL=no if yes, start with small window
1033 STRIPCHART_INTERVAL=60 stripchart refresh interval
1034 TEXT_DEPTH=200 depth of text windows
1035 WINDOW_TITLE="${hostname} eximon" window title
1037 The default for LOG_FONT is
1039 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1041 and the default for LOG_STRIPCHARTS is
1043 LOG_STRIPCHARTS='/ <= /in/
1045 / => .+ R=local/local/
1046 / => .+ T=[^ ]*smtp/smtp/'
1048 That is, there are four stripcharts, named in, out, local, and smtp. The first
1049 counts message arrivals, the second counts all deliveries, the third counts
1050 deliveries where the router's name starts with "local", and the fourth counts
1051 deliveries where the transport name contains "smtp".
1053 **** End of OptionLists ****
git://git.exim.org / exim.git / blob