1 $Cambridge: exim/doc/doc-txt/OptionLists.txt,v 1.7 2005/04/04 10:33:49 ph10 Exp $
6 This file contains complete lists of four kinds of Exim option:
8 1. Those that can appear in the run time configuration file;
9 2. Those that can be used on the command line;
10 3. Those that can appear in the build time configuration (Local/Makefile);
11 4. Those that can appear in the build time configuration for the Exim monitor
14 This file was last updated for Exim release 4.50.
20 As Exim has developed, new options have been added at each major release. For
21 the most part, backwards compatibility has been maintained, and obsolete
22 options continue to be recognized. However, incompatible changes took place at
23 releases 3.00, and 4.00. In both cases, several groups of options were
24 amalgamated into new, extended options, and obsolete options were removed.
26 The table below contains a complete list of all Exim's current options, along
27 with their types, default values, and where they can be used. String options
28 that are expanded before use are marked with *. Host lists, domain lists, and
29 address lists are always expanded. In some cases the defaults are not fixed
30 values, or not short enough to fit in the table. These are indicated by +. Some
31 other default values are determined when the Exim binary is compiled; these are
34 For options that are specific to a particular driver, the fourth column
35 contains the driver name, for example, appendfile. Otherwise, it contains
37 . `main' for options that appear in the main section of Exim's configuration
40 . `authenticators' for generic options that apply to any authenticator;
42 . `routers' for generic options that apply to any router;
44 . `transports' for generic options that apply to any transport.
46 The fifth column contains the version of Exim in which the option was added, or
47 substantially changed. Where no number is given, the option has been in Exim
48 since the very early releases. The routers were completely reorganised for
49 release 4.00, and so no router options are shown as earlier than 4.00, though
50 in fact some of them were inherited from earlier versions.
52 -----------------------------------------------------------------------------------------
53 accept_8bitmime boolean false main 1.60
54 acl_not_smtp string* unset main 4.11
55 acl_not_smtp_mime string* unset main 4.51 with content scan
56 acl_smtp_auth string* unset main 4.00
57 acl_smtp_connect string* unset main 4.11
58 acl_smtp_data string* unset main 4.00
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_test boolean true routers 4.14
72 admin_groups string list unset main 3.02
73 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
74 allow_commands string list* unset pipe 1.89
75 allow_defer boolean false redirect 4.00
76 allow_fail boolean false redirect 4.00
77 allow_filter boolean false redirect 4.00
78 allow_freeze boolean false redirect 4.00
79 allow_fifo boolean false appendfile 3.13
80 allow_localhost boolean false smtp 1.73
81 allow_mx_to_ip boolean false main 3.14
82 allow_symlink boolean false appendfile
83 allow_utf8_domains boolean false main 4.14
84 auth_advertise_hosts host list "*" main 4.00
85 authenticated_sender string* unset smtp 4.14
86 authenticate_hosts host list unset smtp 3.13
87 auto_thaw time 0s main
88 av_scanner string* + main 4.50 with content scan
89 batch_id string unset appendfile 4.00
92 batch_max integer 100 appendfile
95 bcc string* unset autoreply
96 bi_command string unset main
97 body_only boolean false transports 2.05
98 bounce_message_file string unset main 4.00
99 bounce_message_text string unset main 4.00
100 bounce_return_body boolean true main 4.23
101 bounce_return_message boolean true main 4.00
102 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
103 bounce_sender_authentication string unset main 4.00
104 callout_domain_negative_expire time 3h main 4.11
105 callout_domain_positive_expire time 7d main 4.11
106 callout_negative_expire time 2h main 4.11
107 callout_positive_expire time 24h main 4.11
108 callout_random_local_part string* + main 4.11
109 cannot_route_message string* unset routers 4.11
110 caseful_local_part boolean false routers 4.00
111 cc string* unset autoreply
112 check_ancestor boolean false redirect 4.00
113 check_group boolean false appendfile
115 check_local_user boolean false routers 4.00
116 check_log_inodes integer 0 main
117 check_log_space integer 0 main
118 check_owner boolean true appendfile 3.14
120 check_secondary_mx boolean false dnslookup 4.00
121 check_spool_inodes integer 0 main
122 check_spool_space integer 0 main
123 check_string string "From " appendfile 3.03
125 check_srv string* unset dnslookup 4.31
126 client_name string* + cram_md5 3.10
127 client_secret string* unset cram_md5 3.10
128 client_send string* unset plaintext 3.10
129 command string* unset lmtp 3.20
131 unset queryprogram 4.00
132 command_group string unset queryprogram 4.00
133 command_timeout time 5m smtp
134 command_user string unset queryprogram 4.00
135 condition string* unset routers 4.00
136 connect_timeout time 0s smtp 1.60
137 connection_max_messages integer 500 smtp 4.00 replaces batch_max
138 create_directory boolean true appendfile
139 create_file string "anywhere" appendfile
140 current_directory string unset transports 4.00
141 unset queryprogram 4.00
142 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
143 data string unset redirect 4.00
144 data_timeout time 5m smtp
145 debug_print string* unset authenticators 4.00
147 unset transports 2.00
148 delay_after_cutoff boolean true smtp
149 delay_warning time list 24h main
150 delay_warning_condition string* + main 1.73
151 deliver_drop_privilege boolean false main 4.00
152 deliver_queue_load_max fixed-point unset main 1.70
153 delivery_date_add boolean false transports
154 delivery_date_remove boolean true main
155 directory string* unset appendfile
156 directory_mode octal-integer 0700 appendfile
157 directory_transport string* unset redirect 4.00
158 disable_logging boolean false routers 4.11
159 disable_logging boolean false transports 4.11
160 dns_again_means_nonexist domain list unset main 1.89
161 dns_check_names_pattern string + main 2.11
162 dns_ipv4_lookup boolean false main 3.20
163 dns_qualify_single boolean true smtp
164 dns_retrans time 0s main 1.60
165 dns_retry integer 0 main 1.60
166 dns_search_parents boolean false smtp
167 domains domain list unset routers 4.00
168 driver string unset authenticators
171 drop_cr boolean false main 4.00 became a no-op in 4.21
172 envelope_to_add boolean false transports
173 envelope_to_remove boolean true main
174 environment string* unset pipe 2.95
175 errors_copy string list* unset main
176 errors_reply_to string unset main
177 errors_to string* unset routers 4.00
178 escape_string string ">From " appendfile 3.03
180 exim_group string ++ main
181 exim_path string ++ main
182 exim_user string ++ main
183 expn boolean true routers
184 extra_local_interfaces string unset main 4.21
185 extract_addresses_remove_arguments boolean true main 1.92
186 fail_verify boolean false routers
187 fail_verify_recipient boolean false routers 4.00
188 fail_verify_sender boolean false routers 4.00
189 fallback_hosts string list unset routers 4.00
191 file string* unset appendfile
194 file_expand boolean false autoreply
195 file_format string unset appendfile 3.03
196 file_must_exist boolean false appendfile
197 file_optional boolean false autoreply
198 file_transport string* unset redirect 4.00
199 final_timeout time 10m smtp
200 finduser_retries integer 0 main
201 forbid_blackhole boolean false redirect 4.00
202 forbid_exim_filter boolean false redirect 4.44
203 forbid_fail boolean false redirect 4.00
204 forbid_file boolean false redirect 4.00
205 forbid_filter_existstest boolean false redirect 4.00
206 forbid_filter_logwrite boolean false redirect 4.00
207 forbid_filter_lookup boolean false redirect 4.00
208 forbid_filter_perl boolean false redirect 4.00
209 forbid_filter_readfile boolean false redirect 4.00
210 forbid_filter_readsocket boolean false redirect 4.11
211 forbid_filter_reply boolean false redirect 4.00
212 forbid_filter_run boolean false redirect 4.00
213 forbid_include boolean false redirect 4.00
214 forbid_pipe boolean false redirect 4.00
215 forbid_sieve_filter boolean false redirect 4.44
216 freeze_exec_fail boolean false pipe 1.89
217 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
218 from string* unset autoreply
219 gecos_name string* unset main
220 gecos_pattern string unset main
221 gethostbyname boolean false smtp
222 group string + routers 4.00
223 unset transports 4.00 replaces local option in some transports
224 header_line_maxsize integer 0 (unset) main 4.14
225 header_maxsize integer 1M main 4.14
226 headers string* unset autoreply
227 headers_add string* unset routers 4.00
229 headers_charset string ++ main 4.21
230 headers_only boolean false transports 2.05
231 headers_remove string* unset routers 4.00
233 headers_rewrite string unset transports 3.20
234 helo_accept_junk_hosts host list unset main 3.00
235 helo_allow_chars string "" main 4.02
236 helo_lookup_domains domain list unset main 4.00
237 helo_data string* "$primary_hostname" smtp 3.21
238 helo_try_verify_hosts host list unset main 4.00
239 helo_verify_hosts host list unset main 1.73
240 hide_child_in_errmsg false redirect 4.00
241 hold_domains domain list unset main 1.70
242 home_directory string* unset transports 4.00 replaces individual options
243 host_find_failed string "freeze" manualroute 4.00
244 host_lookup host list unset main 3.00
245 host_lookup_order string list "bydns:byaddr" main 4.30
246 host_reject_connection host list unset main 4.00
247 hosts string unset iplookup 4.00
248 string list* unset smtp
249 hosts_avoid_esmtp host list unset smtp 4.21
250 hosts_avoid_tls host list unset smtp 3.20
251 hosts_connection_nolog host list unset main 4.43
252 hosts_max_try integer 5 smtp 3.20
253 hosts_max_try_hardlimit integer 50 smtp 4.50
254 hosts_nopass_tls host list unset smtp 4.00
255 hosts_override boolean false smtp 2.11
256 hosts_randomize boolean false manualroute 4.00
258 hosts_require_auth host list unset smtp 4.00
259 hosts_require_tls host list unset smtp 3.20
260 hosts_treat_as_local domain list unset main 1.95
261 hosts_try_auth host list unset smtp 4.00
262 ignore_bounce_errors_after time 0s main 4.00
263 ignore_eacces boolean false redirect 4.00
264 ignore_enotdir boolean false redirect 4.00
265 ignore_fromline_hosts host list unset main
266 ignore_fromline_local boolean false main 2.05
267 ignore_status boolean false pipe
268 ignore_target_hosts host list unset routers 4.00
269 include_directory string unset redirect 4.00
270 initgroups false routers 4.00
271 interface string list unset smtp 1.70
272 keep_malformed time 4d main
273 keepalive boolean true smtp 2.05
274 ldap_default_servers string list unset main 3.02
275 ldap_version int 2 or 3 main 4.14
276 local_from_check boolean true main 3.14
277 local_from_prefix string unset main 3.14
278 local_from_suffix string unset main 3.14
279 local_interfaces string list unset main 1.60
280 local_part_prefix string unset routers 4.00 replaces prefix
281 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
282 local_part_suffix string unset routers 4.00 replaces suffix
283 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
284 local_parts string list* unset routers 4.00
285 local_scan_timeout time 5m main 4.03
286 local_sender_retain boolean false main 4.00
287 localhost_number string unset main
288 lock_fcntl_timeout time 0s appendfile 3.14
289 lock_flock_timeout time 0s appendfile 4.11
290 lock_interval time 3s appendfile
291 lock_retries integer 10 appendfile
292 lockfile_mode octal-integer 0600 appendfile
293 lockfile_timeout time 30m appendfile
294 log string* unset autoreply
295 log_as_local boolean + routers 4.00
296 log_file_path string list ++ main
297 log_defer_output boolean false pipe 1.89
298 log_fail_output boolean false pipe 1.60
299 log_output boolean false pipe 1.60
300 log_selector string unset main 4.00
301 log_timezone boolean false main 4.11
302 lookup_open_max integer 25 main 2.05
303 mailbox_filecount string* unset appendfile 4.43
304 mailbox_size string* unset appendfile 4.43
305 maildir_format boolean false appendfile 1.70
306 maildir_retries integer 10 appendfile 1.70
307 maildir_tag string* unset appendfile 1.92
308 maildir_use_size_file boolean false appendfile 4.30
309 mailstore_format boolean false appendfile 2.00
310 mailstore_prefix string* unset appendfile 2.00
311 mailstore_suffix string* unset appendfile 2.00
312 match_directory string* unset localuser
313 max_output integer 20K pipe
314 max_rcpt integer 100 smtp 1.60
315 max_user_name_length integer 0 main
316 mbx_format boolean false appendfile 2.10
317 message_body_visible integer 500 main
318 message_id_header_domain string* unset main 4.11
319 message_id_header_text string* unset main
320 message_logs boolean true main 4.10
321 message_prefix string* + appendfile 4.00 replaces prefix
322 string* unset pipe 4.00 replaces prefix
323 message_size_limit integer 0 main
325 message_suffix string* + appendfile 4.00 replaces suffix
326 string* unset pipe 4.00 replaces suffix
327 mode octal-integer 0600 appendfile
329 mode_fail_narrower boolean true appendfile 1.70
330 modemask octal-integer 022 redirect 4.00
331 more boolean true routers 4.00
332 move_frozen_messages boolean false main 3.09
333 multi_domain boolean true smtp
334 mx_domains domain list unset dnslookup 4.00
335 mx_fail_domains domain list unset dnslookup 4.43
336 mysql_servers string list unset main 3.03
337 never_users string list unset main
338 notify_comsat boolean false appendfile
339 once string* unset autoreply
340 once_file_size integer 0 autoreply 3.20
341 once_repeat time 0s autoreply 2.95
342 one_time boolean false redirect 4.00
343 optional boolean false iplookup 4.00
344 oracle_servers string unset main 4.00
345 owners string list unset redirect 4.00
346 owngroups string list unset redirect 4.00
347 pass_on_timeout boolean false routers 4.00
348 pass_router string unset routers 4.00
349 path string "/usr/bin" pipe
350 percent_hack_domains domain list unset main
351 perl_at_start boolean false main 2.10
352 perl_startup string unset main 2.10
353 pgsql_servers string list unset main 3.14
354 pid_file_path string ++ main
355 pipe_as_creator boolean false pipe
356 pipe_transport string* unset redirect 4.00
357 pipelining_advertise_hosts host list "*" main 4.14
358 port integer 0 iplookup 4.00
360 preserve_message_logs boolean false main
361 primary_hostname string + main
362 print_topbitchars boolean false main 1.89
363 process_log_path string unset main 4.21
364 prod_requires_admin boolean true main 1.70
365 protocol string "udp" iplookup 4.00
366 string "smtp" smtp 3.20
367 public_name string unset authenticators 3.10
368 qualify_domain string + main
369 string* unset redirect 4.31
370 qualify_preserve_domain boolean false redirect 4.00
371 qualify_recipient string + main
372 qualify_single boolean true dnslookup 4.00
373 query string* + iplookup 4.00
374 queue_domains domain list unset main 4.00
375 queue_list_requires_admin boolean true main 1.95
376 queue_only boolean false main
377 queue_only_file string unset main 2.05
378 queue_only_load fixed-point unset main
379 queue_only_override boolean true main 4.21
380 queue_run_in_order boolean false main 1.70
381 queue_run_max integer 5 main
382 queue_smtp_domains domain list unset main
383 quota string* unset appendfile 1.60
384 quota_directory string* unset appendfile 4.11
385 quota_filecount integer 0 appendfile 2.05
386 quota_is_inclusive boolean true appendfile 3.20
387 quota_size_regex string unset appendfile 3.14
388 quota_warn_message string* + appendfile 2.10
389 quota_warn_threshold string* 0 appendfile 2.10
390 rcpt_include_affixes boolean false transports 4.21
391 receive_timeout time 0s main 4.00 replacing accept_timeout
392 received_header_text string* + main
393 received_headers_max integer 30 main
394 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
395 recipients_max integer 0 main 1.60
396 recipients_max_reject boolean false main 1.70
397 redirect_router string unset routers 4.00
398 remote_max_parallel integer 1 main
399 remote_sort_domains domain list unset main 4.00 replacing remote_sort
400 repeat_use boolean true redirect 4.00
401 reply_to string* unset autoreply 2.05
402 reply_transport string* unset redirect 4.00
403 require_files string list* unset routers 4.00
404 reroute string* unset iplookup 4.00
405 response_pattern string unset iplookup 4.00
406 restrict_to_path boolean false pipe
407 retry_data_expire time 7d main 3.03
408 retry_include_ip_address boolean true smtp 1.92
409 retry_interval_max time 24h main
410 retry_use_local_part boolean + routers 4.00
411 + transports 4.00 replacing individual options
412 return_fail_output boolean false pipe 1.60
413 return_message boolean false autoreply
414 return_output boolean false pipe
415 return_path string* unset transports 2.05
416 return_path_add boolean false transports
417 return_path_remove boolean true main
418 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
419 rewrite boolean true redirect 4.00
420 rewrite_headers boolean true dnslookup 4.00
421 rfc1413_hosts host list * main
422 rfc1413_query_timeout time 30s main
423 router_home_directory string* unset routers 4.11
424 route_data string* unset manualroute 4.00
425 route_list string list unset manualroute 4.00
426 same_domain_copy_routing boolean false dnslookup 4.00
427 search_parents boolean false dnslookup 4.00
428 self string "freeze" routers 4.00
429 sender_unqualified_hosts host list unset main
430 senders address list unset routers 4.00
431 serialize_hosts host list unset smtp 1.60
432 server_advertise_condition string* unset authenticators 4.14
433 server_condition string* unset plaintext 3.10
434 server_hostname string* "$primary_hostname" cyrus_sasl 4.43
435 server_mail_auth_condition string* unset authenticators 3.22
436 server_mech string public_name cyrus_sasl 4.43
437 server_prompts string* unset plaintext 3.10
438 server_realm string unset cyrus_sasl 4.43
439 server_secret string* unset cram_md5 3.10
440 server_service string "smtp" cyrus_sasl 4.43
441 server_set_id string* unset authenticators 3.10
442 shadow_condition string* unset transports
443 shadow_transport string unset transports
444 size_addition integer 1024 smtp 1.91
445 skip_syntax_errors boolean false redirect 4.00
446 smtp_accept_keepalive boolean true main
447 smtp_accept_max integer 20 main
448 smtp_accept_max_nonmail integer 10 main 4.11
449 smtp_accept_max_nonmail_hosts host list * main 4.14
450 smtp_accept_max_per_connection integer 1000 main 4.00
451 smtp_accept_max_per_host integer 0 main 2.05
452 smtp_accept_queue integer 0 main
453 smtp_accept_queue_per_connection integer 10 main 2.03
454 smtp_accept_reserve integer 0 main
455 smtp_active_hostname string* unset main 4.33
456 smtp_banner string* + main
457 smtp_check_spool_space boolean true main 2.10
458 smtp_connect_backlog integer 5 main
459 smtp_enforce_sync boolean true main 4.00
460 smtp_etrn_command string* unset main 1.92
461 smtp_etrn_serialize boolean true main 1.89
462 smtp_load_reserve fixed-point unset main
463 smtp_max_synprot_errors integer 3 main 4.30
464 smtp_max_unknown_commands integer 3 main 4.14
465 smtp_ratelimit_hosts host list unset main 4.00
466 smtp_ratelimit_mail string unset main 4.00
467 smtp_ratelimit_rcpt string unset main 4.00
468 smtp_receive_timeout time 5m main
469 smtp_reserve_hosts host list unset main
470 smtp_return_error_details boolean false main 4.11
471 socket string* unset lmtp 4.11
472 spamd_address string + main 4.50 with content scan
473 split_spool_directory boolean false main 1.70
474 spool_directory string ++ main
475 srv_fail_domains domain list unset dnslookup 4.43
476 strip_excess_angle_brackets boolean false main
477 strip_trailing_dot boolean false main
478 subject string* unset autoreply
479 syntax_errors_text string* unset redirect 4.00
480 syntax_errors_to string unset redirect 4.00
481 syslog_duplication boolean true main 4.21
482 syslog_facility string unset main 4.20
483 syslog_processname string "exim" main 4.20
484 syslog_timestamp boolean true main 4.00
485 system_filter string unset main 4.00 replacing message_filter
486 system_filter_directory_transport string unset main 4.00 replacing message_filter
487 system_filter_file_transport string unset main 4.00 replacing message_filter
488 system_filter_group string unset main 4.00 replacing message_filter
489 system_filter_pipe_transport string unset main 4.00 replacing message_filter
490 system_filter_reply_transport string unset main 4.00 replacing message_filter
491 system_filter_user string unset main 4.00 replacing message_filter
492 tcp_nodelay boolean true main 4.23
494 temp_errors string list + pipe 1.95
495 text string* unset autoreply
496 timeout time 5m lmtp 3.20
500 timeout_frozen_after time 0s main 3.20
501 timezone string + main 3.15
502 tls_advertise_hosts host list * main 3.20
503 tls_certificate string* unset main 3.20
505 tls_dhparam string* unset main 3.20
506 tls_on_connect_ports string unset main 4.43
507 tls_privatekey string* unset main 3.20
509 tls_remember_emstp boolean false main 4.21
510 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
511 string* unset main 4.33
512 tls_tempfail_tryclear boolean true smtp 4.05
513 tls_try_verify_hosts host list unset main 4.00
514 tls_verify_certificates string* unset main 3.20
516 tls_verify_hosts host list unset main 3.20
517 to string* unset autoreply
518 translate_ip_address string unset routers 4.00
519 transport string* unset routers 4.00
520 transport_current_directory string unset routers 4.00
521 transport_home_directory string unset routers 4.00
522 transport_filter string unset transports
523 transport_filter_timeout time 5m transports 4.30
524 trusted_groups string list unset main
525 trusted_users string list unset main
526 umask octal-integer 022 pipe
527 unknown_login string unset main
528 unknown_username string unset main
529 unseen boolean false routers 4.00
530 untrusted_set_sender boolean false main 3.20
531 use_bsmtp boolean false appendfile 4.00
533 use_crlf boolean false appendfile 1.89
535 use_fcntl_lock boolean + appendfile 1.70
536 use_flock_lock boolean + appendfile 4.11
537 use_lockfile boolean + appendfile
538 use_mbx_lock boolean + appendfile 2.10
539 use_shell boolean false pipe 1.70
540 user string + routers 4.00
541 unset transports 4.00 replaces individual options
542 uucp_from_pattern string + main 1.75
543 uucp_from_sender string* "$1" main 1.75
544 verify boolean true routers 4.00
545 verify_only boolean false routers 4.00
546 verify_recipient boolean true routers 4.00
547 verify_sender boolean true routers 4.00
548 warn_message_file string unset main 4.00
549 widen_domains string list unset dnslookup 4.00
550 write_rejectlog boolean true main 4.31
554 2. COMMAND LINE OPTIONS
555 -----------------------
557 The table below contains a complete list of all Exim's command line options.
558 Those marked with # are available only to trusted users, those marked with +
559 are available only to admin users, and those marked with * exist only to
560 provide compatibility with Sendmail.
563 --help Give a little help (not a lot)
566 -bdf + Start daemon and run it in the foreground
567 -be Test string expansion
568 -bF Test system filter file
569 -bf Test user filter file
570 -bfd Set domain for filter testing
571 -bfl Set local part for filter testing
572 -bfp Set local part prefix for filter testing
573 -bfs Set local part suffix for filter testing
574 -bh Test incoming SMTP call, omitting callouts
575 -bhc Test incoming SMTP call, with callouts
576 -bi * Run <command>bi_command</command>
577 -bm Accept message on standard input
578 -bnq Don't qualify addresses in locally submitted messages
579 -bP Show configuration option settings
581 -bpa + ... with generated addresses as well
582 -bpc + ... but just show a count of messages
583 -bpr + ... do not sort
584 -bpra + ... with generated addresses, unsorted
585 -bpru + ... only undelivered addresses, unsorted
586 -bpu + ... only undelivered addresses
587 -brt Test retry rules
588 -brw Test rewriting rules
589 -bS Read batch SMTP on standard input
590 -bs Run SMTP on standard input and output
591 -bt Test address directing and routing
592 -bV Verify version number
593 -bv Test recipient address verification
594 -bvs Test sender address verification
595 -C + Use alternate configuration file
596 -D + Define macro for configuration file
597 -d + Turn on debugging output
598 -dd + Ditto, but if a daemon, not for subprocesses
599 -dropcr Remove CR character in input: became a no-op in 4.21
601 -ex * Synonym for -oex (for several different x)
602 -F Set calling user name
603 -f # Set calling user address
606 -i Dot does not terminate message
607 -M + Force deliver specific message
608 -Mar + Add recipient to message
609 -MC Internal use only
610 -MCA Internal use only
611 -MCP Internal use only
612 -MCQ Internal use only
613 -MCS Internal use only
614 -MCT Internal use only
615 -Mc + Deliver specific message
616 -Mes + Edit message sender
617 -Mf + Freeze message(s)
618 -Mg + Give up (bounce) message(s)
619 -Mmad + Mark all recipients delivered
620 -Mmd + Mark one recipient delivered
621 -Mrm + Remove message(s) (no bounce)
622 -Mt + Thaw message(s)
623 -Mvb + View message body
624 -Mvh + View message header
625 -Mvl + View message log
627 -N + Deliver without transporting
630 -oA * Supply argument for <option>-bi</option>
631 -oB Set max messages down one connection
632 -odb Background delivery
633 -odf Foreground delivery
634 -odi Foreground delivery
635 -odq Queue message; do not deliver
636 -odqs ... do not do SMTP deliveries
637 -oee Error sent by mail; zero return code
638 -oem Error sent by mail; non-zero return code
639 -oep Error written to standard error stream
640 -oeq * Error written to standard error stream
641 -oew * Error sent by mail; non-zero return code
642 -oi Dot does not terminate message
643 -oitrue * Dot does not terminate message
644 -oMa # Supply host address
645 -oMaa # Supply authenticator name
646 -oMai # Supply authenticated id
647 -oMas # Supply authenticated sender
648 -oMi # Supply interface address
649 -oMr # Supply protocol name
650 -oMs # Supply host name
651 -oMt # Supply ident string
654 -oP * Specify path for daemon's pid file
655 -or Timeout non-SMTP messages
656 -os Timeout for SMTP messages
657 -ov * Verbose; same as -v
658 -oX Alternative port for daemon
659 -pd Delay Perl interpreter start
660 -ps Do not delay Perl interpreter start
661 -p<r>:<s> * Same as -oMr <r> -oMs <s>
663 -qf + ... force delivery ) Other combinations are
664 -qff + ... and include frozen messages ) possible. The syntax is
665 -qi + ... initial deliveries only )
666 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
667 -qq + Two-stage queue run )
670 -R Select by recipient in queue run
672 -Rff ... and frozen messages
673 -Rr ... using regular expression
674 -Rrf ... with forcing
675 -Rrff ... and frozen messages
677 -S Select by sender in queue run
679 -Sff ... and frozen messages
680 -Sr ... using regular expression
681 -Srf ... with forcing
682 -Srff ... and frozen messages
683 -Tqt * Used by Exim test suite; not recognized in normal use
684 -t Take recipients from header lines
686 -tls-on-connect Do TLS on startup (for legacy clients)
688 -v Verbose - shows SMTP dialogue and other delivery info
689 -x Ignored (AIX compatibility)
692 3. BUILD TIME OPTIONS FOR EXIM
693 ------------------------------
695 The table below contains a complete list of options that can be set in
696 Local/Makefile when building Exim. More information about individual options
697 can be found in src/EDITME and OS/Makefile-Default.
699 The second column below gives the type of option:
701 . `system' means the option is concerned with the operating system;
703 . `driver' means the option selects a driver to be included in the binary;
705 . `lookup' means the option selects a lookuptype to be included in the binary;
707 . `mandatory' means the option is required to be supplied;
709 . `recommended' means the option is recommended to be supplied;
711 . `optional' means what it says;
713 Those marked with * are specialized and are unlikely to be required in most
714 installations. Those that are marked with ** are commonly set in OS-specific
715 Makefiles. If you use any of these in your Local/Makefile, you may need to
716 reproduce some of the OS-specific settings. For example, in the Makefile for
717 Solaris (which is actually called OS/Makefile-SunOS5), there is
719 LIBS=-lsocket -lnsl -lkstat
721 If you use LIBS to add extra libraries, you must also include the OS ones in
722 your setting. It is better, in this particular case, to use EXTRALIBS, which is
723 empty by default, and is provided for just this reason. Of course, if you do
724 actually want to modify a setting from the OS-specific file, there is nothing
725 to stop you overriding it in your Local/Makefile.
727 Option Type Description
728 ------------------------------------------------------------------------------
730 ALT_CONFIG_PREFIX optional restricts location of -C files
731 ALT_CONFIG_ROOT_ONLY optional* privileged -C needs root (not exim)
732 APPENDFILE_MODE optional*
733 APPENDFILE_DIRECTORY_MODE optional*
734 APPENDFILE_LOCKFILE_MODE optional*
735 AR system command to build a library
736 AUTH_CRAM_MD5 driver include cram_md5 authenticator
737 AUTH_PLAINTEXT driver include plaintext authenticator
738 AUTH_SPA driver include SPA (NTLM) authenticator
739 BASENAME_COMMAND system** path to basename
740 BASE_62=62 optional* not normally changed for Unix
741 BIN_DIRECTORY mandatory Exim binary directory
742 CC system** C compiler
743 CFLAGS system** flags for C compiler
744 CHGRP_COMMAND system** path to chgrp
745 CHOWN_COMMAND system** path to chown
746 COMPRESS_COMMAND system path to a compress command
747 COMPRESS_SUFFIX system suffix added to compressed files
748 CONFIGURE_FILE mandatory Exim runtime configuration file
749 CONFIGURE_FILE_USE_EUID optional*
750 CONFIGURE_FILE_USE_NODE optional*
751 CONFIGURE_GROUP optional* alternate group for configuration file
752 CONFIGURE_OWNER optional* alternate owner for configuration file
753 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
754 DBMLIB optional** location of DBM library
755 DB_DIRECTORY_MODE optional* mode for hints directory
756 DB_LOCKFILE_MODE optional* mode for hints lock files
757 DB_LOCK_TIMEOUT optional* timeout for hints lock files
758 DB_MODE optional* mode for hints files
759 DEFAULT_CRYPT optional use crypt16() as default
760 DELIVER_IN_BUFFER_SIZE optional*
761 DELIVER_OUT_BUFFER_SIZE optional*
762 DISABLE_D_OPTION optional disables -D option
763 ERRNO_QUOTA optional* error code for system quota failures
764 EXICYCLOG_MAX optional number of old log files to keep
765 EXIMDB_DIRECTORY_MODE optional* for hints database directory
766 EXIMDB_LOCKFILE_MODE optional* for hints lock files
767 EXIMDB_MODE optional* mode for hints files
768 EXIMON_TEXTPOP system**
770 EXIM_GROUP mandatory group to use for Exim
771 EXIM_MONITOR optional set to eximon.bin to compile
773 EXIM_USER mandatory user to use for Exim
774 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
775 EXIWHAT_KILL_SIGNAL system** -SIGUSER1 or numerical equivalent
776 EXIWHAT_MULTIKILL_CMD system**
777 EXIWHAT_MULTIKILL_ARG system**
778 EXIWHAT_PS_ARG system** to list all processes
779 EXIWHAT_PS_CMD system** path to ps command
780 EXTRALIBS system additional libraries
781 EXTRALIBS_EXIM system additional libraries for Exim only
782 EXTRALIBS_EXIMON system additional libraries for the monitor
783 FIXED_NEVER_USERS optional can't override at runtime
784 HAVE_ICONV system the iconv() function is available
785 HAVE_IPV6 system include IPv6 support
786 HEADERS_CHARSET optional charset for decoded header lines
787 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
788 HEADER_MAXSIZE optional* max memory for message header
789 HOSTNAME_COMMAND system** path to hostname command
790 INCLUDE system path to include files
791 INFO_DIRECTORY optional directory for Info documentation
792 INPUT_DIRECTORY_MODE optional mode for input directory
793 IPV6_INCLUDE system additional includes for IPv6
794 IPV6_LIBS system additional libraries for IPv6
795 LDAP_LIB_TYPE optional type of LDAP library
796 LFLAGS system** link editor flags
797 LIBIDENTCFLAGS system C flags when compiling libident
798 LIBIDENTNAME system name for libident library
799 LIBRESOLV system** library for DNS resolver
800 LIBS system** additional libraries
801 LIBS_EXIM system** additional libraries for Exim ony
802 LIBS_EXIMON system** additional libraries for monitor
803 LOCAL_SCAN_SOURCE optional location of local_scan() source
804 LOG_DIRECTORY_MODE optional mode for log directory
805 LOG_FILE_PATH optional path to log files
806 LOG_MODE optional mode for log files
807 LOOKUP_CDB lookup include cdb lookup
808 LOOKUP_DBM lookup include dbm lookup
809 LOOKUP_DNSDB lookup include dnsdb lookup
810 LOOKUP_DSEARCH lookup include dsearch lookup
811 LOOKUP_INCLUDE lookup include files for lookups
812 LOOKUP_LDAP lookup include ldap lookup
813 LOOKUP_LIBS lookup include libraries for lookups
814 LOOKUP_LSEARCH lookup include all lsearch lookups
815 LOOKUP_MYSQL lookup include mysql lookup
816 LOOKUP_NIS lookup include nis lookup
817 LOOKUP_NISPLUS lookup include nisplus lookup
818 LOOKUP_ORACLE lookup include oracle lookup
819 LOOKUP_PGSQL lookup include pgsql lookup
820 LOOKUP_TESTDB lookup*
821 LOOKUP_WHOSON lookup include whoson lookup
822 MAKE_SHELL optional* shell to use for make
823 MAX_FILTER_SIZE optional* max file size for filter files
824 MAX_INCLUDE_SIZE optional* max file size for :include: files
825 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
826 MAX_NAMED_LIST optional* max named lists of a given type
827 MAX_INTERFACES system maximum network interfaces
828 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
829 MV_COMMAND system path to mv command
830 NO_SYMLINK optional install doesn't make 'exim" symlink
831 PCRE_CFLAGS system compile flags for PCRE library
832 PERL_CC system* compiler for Perl interface code
833 PERL_CCOPTS system* flags for same
834 PERL_COMMAND system path to Perl
835 PERL_LIBS system* library for compiling Perl interface
836 PID_FILE_PATH optional path to daemon's pid file
837 RADIUS_CONFIG_FILE optional path to Radius config file
838 RADIUS_LIB_TYPE optional type of RADIUS library
839 RANLIB system** path to ranlib command
840 RM_COMMAND system path to rm command
841 ROUTER_ACCEPT driver include accept router
842 ROUTER_DNSLOOKUP driver include dnslookup router
843 ROUTER_MANUALROUTE driver include manualroute router
844 ROUTER_IPLITERAL driver include ipliteral router
845 ROUTER_IPLOOKUP driver include iplookup router
846 ROUTER_REDIRECT driver include redirect router
847 ROUTER_QUERYPROGRAM driver include queryprogram router
848 SPOOL_DIRECTORY recommended path to spool directory
849 SPOOL_DIRECTORY_MODE optional mode of spool directory
850 SPOOL_MODE optional mode of spool files
851 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
852 STRIP_COMMAND optional* can be used to strp binaries
853 SUPPORT_A6 optional* support A6 DNS records
854 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
855 SUPPORT_MAILDIR optional support for maildir delivery
856 SUPPORT_MAILSTORE optional support for mailstore delivery
857 SUPPORT_MBX optional support for MBX delivery
858 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
859 SUPPORT_PAM optional support for PAM authentication
860 SUPPORT_TLS optional support for TLS encryption over SMTP
861 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
862 SYSLOG_LOG_PID optional add pid to syslog lines
863 SYSLOG_LONG_LINES optional do not split long syslog lines
864 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
865 TIMEZONE_DEFAULT optional default for timezone option
866 TLS_INCLUDE optional path to include files for TLS
867 TLS_LIBS optional additional libraries for TLS
868 TMPDIR system value for TMPDIR environment variable
869 TRANSPORT_APPENDFILE driver include appendfile transport
870 TRANSPORT_AUTOREPLY driver include autoreply transport
871 TRANSPORT_LMTP driver include lmtp transport
872 TRANSPORT_PIPE driver include pipe transport
873 TRANSPORT_SMTP driver include smtp transport
874 USE_DB system** use native DB interface
875 USE_GNUTLS optional use GnuTLS instead of OpenSSL
876 USE_READLINE optional try to load libreadline for -be
877 USE_TCP_WRAPPERS system link with tcpwrappers
878 USE_TDB optional use the tdb DB interface
879 X11 system** X11 base directory
880 X11_LD_LIB system** X11 link library
881 XINCLUDE system** X11 include directory
882 XLFLAGS system** X11 link time flags
883 ZCAT_COMMAND system path to zcat command
886 4. BUILD TIME OPTIONS FOR EXIMON
887 --------------------------------
889 The table below contains a complete list of options that can be set in
890 Local/eximon.conf when building the Exim monitor. Where the default is shown as
891 ** it means that the text string is too long to fit in the table and is instead
892 given below. A blank default means that there is no default value.
894 ACTION_OUTPUT=no show output for every action
895 ACTION_QUEUE_UPDATE=yes update queue display after actions
896 BODY_MAX=20000 maximum body display
897 DOMAIN= domain to strip from window title
898 LOG_BUFFER=20K buffer for log tail
899 LOG_DEPTH=300 depth of log subwindow
900 LOG_FONT=** font for log display
901 LOG_STRIPCHARTS=** patterns for stripcharts
902 LOG_WIDTH=950 width of log subwindow
903 MENU_EVENT='Shift<Btn1Down>' keypress for menu
904 MIN_HEIGHT=162 minimum window height
905 MIN_WIDTH=103 minimum window width
906 QUALIFY_DOMAIN= local domain to strip from addresses
907 QUEUE_DEPTH=200 depth of queue subwindow
908 QUEUE_FONT=$LOG_FONT font for queue display
909 QUEUE_INTERVAL=300 queue refresh interval
910 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
911 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
912 QUEUE_WIDTH=950 width of queue subwindow
913 SIZE_STRIPCHART= request partition size stripchart
914 SIZE_STRIPCHART_NAME=space name for size stripchart
915 START_SMALL=no if yes, start with small window
916 STRIPCHART_INTERVAL=60 stripchart refresh interval
917 TEXT_DEPTH=200 depth of text windows
918 WINDOW_TITLE="${hostname} eximon" window title
920 The default for LOG_FONT is
922 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
924 and the default for LOG_STRIPCHARTS is
926 LOG_STRIPCHARTS='/ <= /in/
928 / => .+ R=local/local/
929 / => .+ T=[^ ]*smtp/smtp/'
931 That is, there are four stripcharts, named in, out, local, and smtp. The first
932 counts message arrivals, the second counts all deliveries, the third counts
933 deliveries where the router's name starts with "local", and the fourth counts
934 deliveries where the transport name contains "smtp".
936 **** End of OptionLists ****
git://git.exim.org / exim.git / blob