Add bitwise logical operators to ${eval:

[exim.git] / doc / doc-txt / NewStuff

$Cambridge: exim/doc/doc-txt/NewStuff,v 1.121 2006/11/13 11:26:37 ph10 Exp $

New Features in Exim
--------------------

This file contains descriptions of new features that have been added to Exim.
Before a formal release, there may be quite a lot of detail so that people can
test from the snapshots or the CVS before the documentation is updated. Once
the documentation is updated, this file is reduced to a short list.


Version 4.64
------------

 1. ACL variables can now be given arbitrary names, as long as they start with
    "acl_c" or "acl_m" (for connection variables and message variables), are at
    least six characters long, with the sixth character being either a digit or
    an underscore. The rest of the name can contain alphanumeric characters and
    underscores. This is a compatible change because the old set of variables
    such as acl_m12 are a subset of the allowed names. There may now be any
    number of ACL variables. For example:

      set acl_c13   = value for original ACL variable
      set acl_c13b  = whatever
      set acl_m_foo = something

    What happens if a syntactically valid but undefined ACL variable is
    referenced depends on the setting of the strict_acl_vars option. If it is
    false (the default), an empty string is substituted; if it is true, an
    error is generated. This affects all ACL variables, including the "old"
    ones such as acl_c4. (Previously there wasn't the concept of an undefined
    ACL variable.)

    The implementation has been done in such a way that spool files containing
    ACL variable settings written by previous releases of Exim are compatible
    and can be read by the new release. If only the original numeric names are
    used, spool files written by the new release can be read by earlier
    releases.

 2. There is a new ACL modifier called log_reject_target. It makes it possible
    to specify which logs are used for messages about ACL rejections. Its
    argument is a list of words which can be "main", "reject", or "panic". The
    default is "main:reject". The list may be empty, in which case a rejection
    is not logged at all. For example, this ACL fragment writes no logging
    information when access is denied:

      deny <some conditions>
           log_reject_target =

    The modifier can be used in SMTP and non-SMTP ACLs. It applies to both
    permanent and temporary rejections.

 3. There is a new authenticator called "dovecot". This is an interface to the
    authentication facility of the Dovecot POP/IMAP server, which can support a
    number of authentication methods. If you are using Dovecot to authenticate
    POP/IMAP clients, it might be helpful to use the same mechanisms for SMTP
    authentication. This is a server authenticator only. The only option is
    server_socket, which must specify the socket which is the interface to
    Dovecot authentication. The public_name option must specify an
    authentication mechanism that Dovecot is configured to support. You can
    have several authenticators for different mechanisms. For example:

      dovecot_plain:
        driver = dovecot
        public_name = PLAIN
        server_name = /var/run/dovecot/auth-client
        server_setid = $auth1

      dovecot_ntlm:
        driver = dovecot
        public_name = NTLM
        server_name = /var/run/dovecot/auth-client
        server_setid = $auth1

    If the SMTP connection is encrypted, or if $sender_host_address is equal to
    $interface_address (that is, the connection is local), the "secured" option
    is passed in the Dovecot authentication command. If, for a TLS connection,
    a client certificate has been verified, the "valid-client-cert" option is
    passed.

 4. The variable $message_headers_raw provides a concatenation of all the
    messages's headers without any decoding. This is in contrast to
    $message_headers, which does RFC2047 decoding on the header contents.

 5. In a DNS black list, when the facility for restricting the matching IP
    values is used, the text from the TXT record that is set in $dnslist_text
    may not reflect the true reason for rejection. This happens when lists are
    merged and the IP address in the A record is used to distinguish them;
    unfortunately there is only one TXT record. One way round this is not to
    use merged lists, but that can be inefficient because it requires multiple
    DNS lookups where one would do in the vast majority of cases when the host
    of interest is not on any of the lists.

    A less inefficient way of solving this problem has now been implemented. If
    two domain names, comma-separated, are given, the second is used first to
    do an initial check, making use of any IP value restrictions that are set.
    If there is a match, the first domain is used, without any IP value
    restrictions, to get the TXT record. As a byproduct of this, there is also
    a check that the IP being tested is indeed on the first list. The first
    domain is the one that is put in $dnslist_domain. For example:

      reject message  = rejected because $sender_ip_address is blacklisted \
                        at $dnslist_domain\n$dnslist_text
             dnslists = sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \
                        dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10

    For the first blacklist item, this starts by doing a lookup in
    sbl-xbl.spamhaus.org and testing for a 127.0.0.2 return. If there is a
    match, it then looks in sbl.spamhaus.org, without checking the return
    value, and as long as something is found, it looks for the corresponding
    TXT record. If there is no match in sbl-xbl.spamhaus.org, nothing more is
    done. The second blacklist item is processed similarly.

    If you are interested in more than one merged list, the same list must be
    given several times, but because the results of the DNS lookups are cached,
    the DNS calls themselves are not repeated. For example:

      reject dnslists = http.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.2 : \
                       socks.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.3 : \
                        misc.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.4 : \
                         dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10

    In this case there is a lookup in dnsbl.sorbs.net, and if none of the IP
    values matches (or if no record is found), this is the only lookup that is
    done. Only if there is a match is one of the more specific lists consulted.

 6. All authenticators now have a server_condition option. Previously, only
    plaintext had this, and this has not changed: it must be set to the
    authenticator as a server. For the others, if server_condition is set, it
    is expanded if authentication is successful, and treated exactly as it is
    in plaintext. This can serve as a means of adding authorization to an
    authenticator.

 7. There is a new command-line option called -Mset. It is useful only in
    conjunction with -be (that is, when testing string expansions). It must be
    followed by a message id; Exim loads the given message from its spool
    before doing the expansions, thus setting message-specific variables such
    as $message_size and the header variables. The $recipients variable is
    available. This feature is provided to make it easier to test expansions
    that make use of these variables. However, Exim must be called by an admin
    user when -Mset is used.

 8. Another similar new command-line option is called -bem. It operates like
    -be except that it must be followed by the name of a file. For example:

      exim -bem /tmp/testmessage

    The file is read as a message (as if receiving a locally-submitted non-SMTP
    message) before any of the test expansions are done. Thus, message-specific
    variables such as $message_size and $h_from: are available. However, no
    Received: header is added to the message. If the -t option is set,
    recipients are read from the headers in the normal way, and are shown in
    the $recipients variable. Note that recipients cannot be given on the
    command line, because further arguments are taken as strings to expand
    (just like -be).

 9. When an address is delayed because of a 4xx response to a RCPT command, it
    is now the combination of sender and recipient that is delayed in
    subsequent queue runs until its retry time is reached. You can revert to
    the previous behavious, that is, delay the recipient independent of the
    sender, by setting address_retry_include_sender=false in the smtp
    transport. However, this can lead to problems with servers that regularly
    issue 4xx responses to RCPT commands.

10. Unary negation and the bitwise logical operators and, or, xor, not, and
    shift, have been added to the eval: and eval10: expansion items. These
    items may now contain arithmetic operators (plus, minus, times, divide,
    remainder, negate), bitwise operators (and, or, xor, not, shift), and
    parentheses. All operations are carried out using signed integer
    arithmetic. Operator priorities are as in C, namely:

      (highest) not, negate
                times, divide, remainder
                plus, minus
                shift-left, shift-right
                and
                xor
      (lowest)  or

    Binary operators with the same priority are evaluated from left to right.
    For example:

      ${eval:1+1}            yields 2
      ${eval:1+2*3}          yields 7
      ${eval:(1+2)*3}        yields 9
      ${eval:2+42%5}         yields 4
      ${eval:0xc&5}          yields 4
      ${eval:0xc|5}          yields 13
      ${eval:0xc^5}          yields 9
      ${eval:0xc>>1}         yields 6
      ${eval:0xc<<1}         yields 24
      ${eval:~255&0x1234}    yields 4608
      ${eval:-(~255&0x1234)} yields -4608


Version 4.63
------------

1. There is a new Boolean option called filter_prepend_home for the redirect
   router.

2. There is a new acl, set by acl_not_smtp_start, which is run right at the
   start of receiving a non-SMTP message, before any of the message has been
   read.

3. When an SMTP error message is specified in a "message" modifier in an ACL,
   or in a :fail: or :defer: message in a redirect router, Exim now checks the
   start of the message for an SMTP error code.

4. There is a new parameter for LDAP lookups called "referrals", which takes
   one of the settings "follow" (the default) or "nofollow".

5. Version 20070721.2 of exipick now included, offering these new options:
    --reverse
        After all other sorting options have bee processed, reverse order
        before displaying messages (-R is synonym).
    --random
        Randomize order of matching messages before displaying.
    --size
        Instead of displaying the matching messages, display the sum
        of their sizes.
    --sort <variable>[,<variable>...]
        Before displaying matching messages, sort the messages according to
        each messages value for each variable.
    --not
        Negate the value for every test (returns inverse output from the
        same criteria without --not).


Version 4.62
------------

1. The ${readsocket expansion item now supports Internet domain sockets as well
   as Unix domain sockets. If the first argument begins "inet:", it must be of
   the form "inet:host:port". The port is mandatory; it may be a number or the
   name of a TCP port in /etc/services. The host may be a name, or it may be an
   IP address. An ip address may optionally be enclosed in square brackets.
   This is best for IPv6 addresses. For example:

     ${readsocket{inet:[::1]:1234}{<request data>}...

   Only a single host name may be given, but if looking it up yield more than
   one IP address, they are each tried in turn until a connection is made. Once
   a connection has been made, the behaviour is as for ${readsocket with a Unix
   domain socket.

2. If a redirect router sets up file or pipe deliveries for more than one
   incoming address, and the relevant transport has batch_max set greater than
   one, a batch delivery now occurs.

3. The appendfile transport has a new option called maildirfolder_create_regex.
   Its value is a regular expression. For a maildir delivery, this is matched
   against the maildir directory; if it matches, Exim ensures that a
   maildirfolder file is created alongside the new, cur, and tmp directories.


Version 4.61
------------

The documentation is up-to-date for the 4.61 release. Major new features since
the 4.60 release are:

. An option called disable_ipv6, to disable the use of IPv6 completely.

. An increase in the number of ACL variables to 20 of each type.

. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
  $2, $3, (though those are still set) because the numeric variables get used
  for other things in complicated expansions.

. The default for rfc1413_query_timeout has been changed from 30s to 5s.

. It is possible to use setclassresources() on some BSD OS to control the
  resources used in pipe deliveries.

. A new ACL modifier called add_header, which can be used with any verb.

. More errors are detectable in retry rules.

There are a number of other additions too.


Version 4.60
------------

The documentation is up-to-date for the 4.60 release. Major new features since
the 4.50 release are:

. Support for SQLite.

. Support for IGNOREQUOTA in LMTP.

. Extensions to the "submission mode" features.

. Support for Client SMTP Authorization (CSA).

. Support for ratelimiting hosts and users.

. New expansion items to help with the BATV "prvs" scheme.

. A "match_ip" condition, that matches an IP address against a list.

There are many more minor changes.

****