4 This file contains an almost complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.95.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_insecure_tainted_data boolean true main 4.95 support will drop ~4.97ٍ
82 allow_localhost boolean false smtp 1.73
83 allow_mx_to_ip boolean false main 3.14
84 allow_symlink boolean false appendfile
85 allow_utf8_domains boolean false main 4.14
86 arc_sign string* unset smtp 4.91 with Experimental_ARC
87 auth_advertise_hosts host list "*" main 4.00
88 authenticated_sender string* unset smtp 4.14
89 authenticated_sender_force boolean false smtp 4.61
90 authenticate_hosts host list unset smtp 3.13
91 auto_thaw time 0s main
92 av_scanner string* + main 4.50 with content scan
93 batch_id string unset appendfile 4.00
96 batch_max integer 100 appendfile
99 bcc string* unset autoreply
100 bi_command string unset main
101 body_only boolean false transports 2.05
102 bounce_message_file string* unset main 4.00 expanded from 4.94
103 bounce_message_text string unset main 4.00
104 bounce_return_body boolean true main 4.23
105 bounce_return_message boolean true main 4.00
106 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
107 bounce_sender_authentication string unset main 4.00
108 callout_domain_negative_expire time 3h main 4.11
109 callout_domain_positive_expire time 7d main 4.11
110 callout_negative_expire time 2h main 4.11
111 callout_positive_expire time 24h main 4.11
112 callout_random_local_part string* + main 4.11
113 cannot_route_message string* unset routers 4.11
114 caseful_local_part boolean false routers 4.00
115 cc string* unset autoreply
116 check_ancestor boolean false redirect 4.00
117 check_group boolean false appendfile
119 check_local_user boolean false routers 4.00
120 check_log_inodes integer 0 main
121 check_log_space integer 0 main
122 check_owner boolean true appendfile 3.14
124 check_rfc2047_length boolean true main 4.60
125 check_secondary_mx boolean false dnslookup 4.00
126 check_spool_inodes integer 0 main
127 check_spool_space integer 0 main
128 check_string string "From " appendfile 3.03
130 check_srv string* unset dnslookup 4.31
131 client_authz string* unset gsasl 4.94
132 client_condition string* unset authenticators 4.68
133 client_ignore_invalid_base64 boolean false plaintext 4.61
134 client_name string* + cram_md5 3.10
135 client_password string* unset gsasl 4.94
136 client_secret string* unset cram_md5 3.10
137 client_send string* unset plaintext 3.10
138 unset external (auth) 4.93
139 client_username string* unset gsasl 4.94
140 command string* unset lmtp 3.20
142 unset queryprogram 4.00
143 command_group string unset queryprogram 4.00
144 command_timeout time 5m smtp
145 command_user string unset queryprogram 4.00
146 commandline_checks_require_admin boolean false main 4.90
147 condition string* unset routers 4.00
148 connect_timeout time 0s smtp 1.60
149 connection_max_messages integer 500 smtp 4.00 replaces batch_max
150 create_directory boolean true appendfile
151 create_file string "anywhere" appendfile
152 current_directory string unset transports 4.00
153 unset queryprogram 4.00
154 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
155 daemon_startup_retries int 9 main 4.52
156 daemon_startup_sleep time 30s main 4.52
157 dane_require_tls_ciphers string* unset smtp 4.91
158 data string unset redirect 4.00
159 data_timeout time 5m smtp
160 debug_print string* unset authenticators 4.00
162 unset transports 2.00
163 debug_store boolean false main 4.90
164 delay_after_cutoff boolean true smtp
165 delay_warning time list 24h main
166 delay_warning_condition string* + main 1.73
167 deliver_drop_privilege boolean false main 4.00
168 deliver_queue_load_max fixed-point unset main 1.70
169 delivery_date_add boolean false transports
170 delivery_date_remove boolean true main
171 dkim_canon string* unset smtp 4.70
172 dkim_domain string list* unset smtp 4.72
173 dkim_private_key string* unset smtp 4.70
174 dkim_selector string* unset smtp 4.70
175 dkim_sign_headers string* (RFC4871) smtp 4.70
176 dkim_strict string* unset smtp 4.70
177 dkim_timestamps integer* unset smtp 4.92
178 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
179 dkim_verify_keytypes string ed25519:rsa main 4.93
180 dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
181 dkim_verify_minimal boolean false main 4.93
182 dkim_verify_signers string* $dkim_signers main 4.70
183 directory string* unset appendfile
184 directory_file string* + appendfile
185 directory_mode octal-integer 0700 appendfile
186 directory_transport string* unset redirect 4.00
187 disable_ipv6 boolean false main 4.61
188 disable_logging boolean false routers 4.11
189 false transports 4.11
190 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
191 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
192 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
193 dns_again_means_nonexist domain list unset main 1.89
194 dns_check_names_pattern string + main 2.11
195 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
196 dns_csa_search_limit integer 5 main 4.60
197 dns_csa_use_reverse boolean true main 4.60
198 dns_dnssec_ok integer -1 main 4.82
199 dns_dane_ok integer -1 main 4.83
200 dns_ipv4_lookup boolean false main 3.20
201 dns_qualify_single boolean true smtp
202 dns_retrans time 0s main 1.60
203 dns_retry integer 0 main 1.60
204 dns_search_parents boolean false smtp
205 dns_use_edns0 integer -1 main 4.76
206 domains domain list unset routers 4.00
207 driver string unset authenticators
210 drop_cr boolean false main 4.00 became a no-op in 4.21
211 dscp string unset smtp 4.82
212 dsn_from string* + main 4.67
213 envelope_to_add boolean false transports
214 envelope_to_remove boolean true main
215 environment string* unset pipe 2.95
216 errors_copy string list* unset main
217 errors_reply_to string unset main
218 errors_to string* unset routers 4.00
219 escape_string string ">From " appendfile 3.03
221 exim_group string ++ main
222 exim_path string ++ main
223 exim_user string ++ main
224 exim_version string ++ main 4.93
225 expn boolean true routers
226 extra_local_interfaces string unset main 4.21
227 extract_addresses_remove_arguments boolean true main 1.92
228 fail_verify boolean false routers
229 fail_verify_recipient boolean false routers 4.00
230 fail_verify_sender boolean false routers 4.00
231 fallback_hosts string list unset routers 4.00
233 file string* unset appendfile
236 file_expand boolean false autoreply
237 file_format string unset appendfile 3.03
238 file_must_exist boolean false appendfile
239 file_optional boolean false autoreply
240 file_transport string* unset redirect 4.00
241 filter_prepend_home boolean true redirect 4.63
242 final_timeout time 10m smtp
243 finduser_retries integer 0 main
244 forbid_blackhole boolean false redirect 4.00
245 forbid_exim_filter boolean false redirect 4.44
246 forbid_fail boolean false redirect 4.00
247 forbid_file boolean false redirect 4.00
248 forbid_filter_existstest boolean false redirect 4.00
249 forbid_filter_logwrite boolean false redirect 4.00
250 forbid_filter_lookup boolean false redirect 4.00
251 forbid_filter_perl boolean false redirect 4.00
252 forbid_filter_readfile boolean false redirect 4.00
253 forbid_filter_readsocket boolean false redirect 4.11
254 forbid_filter_reply boolean false redirect 4.00
255 forbid_filter_run boolean false redirect 4.00
256 forbid_include boolean false redirect 4.00
257 forbid_pipe boolean false redirect 4.00
258 forbid_sieve_filter boolean false redirect 4.44
259 forbid_smtp_code boolean false redirect 4.63
260 force_command boolean false pipe 4.82
261 freeze_exec_fail boolean false pipe 1.89
262 freeze_signal boolean false pipe 4.75
263 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
264 from string* unset autoreply
265 gecos_name string* unset main
266 gecos_pattern string unset main
267 gethostbyname boolean false smtp
268 gnutls_allow_auto_pkcs11 boolean false main 4.82
269 gnutls_compat_mode boolean unset main 4.70
270 gnutls_require_kx string* unset main 4.67 deprecated, warns
271 string* unset smtp 4.67 deprecated, warns
272 gnutls_require_mac string* unset main 4.67 deprecated, warns
273 string* unset smtp 4.67 deprecated, warns
274 gnutls_require_protocols string* unset main 4.67 deprecated, warns
275 string* unset smtp 4.67 deprecated, warns
276 group string + routers 4.00
277 unset transports 4.00 replaces local option in some transports
278 header_line_maxsize integer 0 (unset) main 4.14
279 header_maxsize integer 1M main 4.14
280 headers string* unset autoreply
281 headers_add string* unset routers 4.00
283 headers_charset string ++ main 4.21
284 headers_only boolean false transports 2.05
285 headers_remove string* unset routers 4.00
287 headers_rewrite string unset transports 3.20
288 helo_accept_junk_hosts host list unset main 3.00
289 helo_allow_chars string "" main 4.02
290 helo_lookup_domains domain list unset main 4.00
291 helo_data string* "$primary_hostname" smtp 3.21
292 helo_try_verify_hosts host list unset main 4.00
293 helo_verify_hosts host list unset main 1.73
294 hide_child_in_errmsg false redirect 4.00
295 hold_domains domain list unset main 1.70
296 home_directory string* unset transports 4.00 replaces individual options
297 host_all_ignored string "defer" manualroute 4.67
298 host_find_failed string "freeze" manualroute 4.00
299 host_lookup host list unset main 3.00
300 host_lookup_order string list "bydns:byaddr" main 4.30
301 host_reject_connection host list unset main 4.00
302 hosts string unset iplookup 4.00
303 string list* unset smtp
304 hosts_avoid_esmtp host list unset smtp 4.21
305 hosts_avoid_pipelining host list unset smtp 4.67
306 hosts_avoid_tls host list unset smtp 3.20
307 hosts_connection_nolog host list unset main 4.43
308 hosts_max_try integer 5 smtp 3.20
309 hosts_max_try_hardlimit integer 50 smtp 4.50
310 hosts_nopass_tls host list unset smtp 4.00
311 hosts_noproxy_tls host list "*" smtp 4.90
312 hosts_override boolean false smtp 2.11
313 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
314 hosts_randomize boolean false manualroute 4.00
316 hosts_require_auth host list unset smtp 4.00
317 hosts_require_alpn host list unset main 4.95
319 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
320 hosts_require_helo host list "*" main 4.95
321 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
322 hosts_require_tls host list unset smtp 3.20
323 hosts_treat_as_local domain list unset main 1.95
324 hosts_try_auth host list unset smtp 4.00
325 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
326 hosts_try_fastopen host list unset smtp 4.88
327 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
328 ibase_servers string unset main 4.23
329 ignore_bounce_errors_after time 0s main 4.00
330 ignore_eacces boolean false redirect 4.00
331 ignore_enotdir boolean false redirect 4.00
332 ignore_fromline_hosts host list unset main
333 ignore_fromline_local boolean false main 2.05
334 ignore_status boolean false pipe
335 ignore_target_hosts host list unset routers 4.00
336 include_directory string unset redirect 4.00
337 initgroups false routers 4.00
338 interface string list unset smtp 1.70
339 keep_malformed time 4d main
340 keepalive boolean true smtp 2.05
341 ldap_default_servers string list unset main 3.02
342 ldap_version int 2 or 3 main 4.14
343 local_from_check boolean true main 3.14
344 local_from_prefix string unset main 3.14
345 local_from_suffix string unset main 3.14
346 local_interfaces string list unset main 1.60
347 local_part_prefix string unset routers 4.00 replaces prefix
348 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
349 local_part_suffix string unset routers 4.00 replaces suffix
350 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
351 local_parts string list* unset routers 4.00
352 local_scan_timeout time 5m main 4.03
353 local_sender_retain boolean false main 4.00
354 localhost_number string unset main
355 lock_fcntl_timeout time 0s appendfile 3.14
356 lock_flock_timeout time 0s appendfile 4.11
357 lock_interval time 3s appendfile
358 lock_retries integer 10 appendfile
359 lockfile_mode octal-integer 0600 appendfile
360 lockfile_timeout time 30m appendfile
361 log string* unset autoreply
362 log_as_local boolean + routers 4.00
363 log_file_path string list ++ main
364 log_defer_output boolean false pipe 1.89
365 log_fail_output boolean false pipe 1.60
366 log_output boolean false pipe 1.60
367 log_selector string unset main 4.00
368 log_timezone boolean false main 4.11
369 lookup_open_max integer 25 main 2.05
370 mailbox_filecount string* unset appendfile 4.43
371 mailbox_size string* unset appendfile 4.43
372 maildir_format boolean false appendfile 1.70
373 maildir_retries integer 10 appendfile 1.70
374 maildir_tag string* unset appendfile 1.92
375 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
376 maildirfolder_create_regex string unset appendfile 4.62
377 mailstore_format boolean false appendfile 2.00
378 mailstore_prefix string* unset appendfile 2.00
379 mailstore_suffix string* unset appendfile 2.00
380 match_directory string* unset localuser
381 max_output integer 20K pipe
382 max_rcpt integer 100 smtp 1.60
383 max_user_name_length integer 0 main
384 mbx_format boolean false appendfile 2.10
385 message_body_newlines boolean false main 4.68
386 message_body_visible integer 500 main
387 message_id_header_domain string* unset main 4.11
388 message_id_header_text string* unset main
389 message_linelength_limit integer 998 smtp 4.94
390 message_logs boolean true main 4.10
391 message_prefix string* + appendfile 4.00 replaces prefix
392 string* unset pipe 4.00 replaces prefix
393 message_size_limit integer 50M main
395 message_suffix string* + appendfile 4.00 replaces suffix
396 string* unset pipe 4.00 replaces suffix
397 mode octal-integer 0600 appendfile
399 mode_fail_narrower boolean true appendfile 1.70
400 modemask octal-integer 022 redirect 4.00
401 more boolean true routers 4.00
402 move_frozen_messages boolean false main 3.09
403 multi_domain boolean true smtp
404 mx_domains domain list unset dnslookup 4.00
405 mx_fail_domains domain list unset dnslookup 4.43
406 mysql_servers string list unset main 3.03
407 never_users string list unset main
408 notifier_socket string "$spool_directory/exim_daemon_notify"
410 notify_comsat boolean false appendfile
411 once string* unset autoreply
412 once_file_size integer 0 autoreply 3.20
413 once_repeat time 0s autoreply 2.95
414 one_time boolean false redirect 4.00
415 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
416 optional boolean false iplookup 4.00
417 oracle_servers string unset main 4.00
418 owners string list unset redirect 4.00
419 owngroups string list unset redirect 4.00
420 pass_on_timeout boolean false routers 4.00
421 pass_router string unset routers 4.00
422 path string "/usr/bin" pipe
423 percent_hack_domains domain list unset main
424 perl_at_start boolean false main 2.10
425 perl_startup string unset main 2.10
426 permit_coredump boolean false pipe 4.73
427 pgsql_servers string list unset main 3.14
428 pid_file_path string ++ main
429 pipe_as_creator boolean false pipe
430 pipe_transport string* unset redirect 4.00
431 pipelining_advertise_hosts host list "*" main 4.14
432 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
433 port integer 0 iplookup 4.00
435 preserve_message_logs boolean false main
436 prdr_enable boolean false main 4.82 if experimental_prdr
437 primary_hostname string + main
438 print_topbitchars boolean false main 1.89
439 process_log_path string unset main 4.21
440 prod_requires_admin boolean true main 1.70
441 protocol string "udp" iplookup 4.00
442 string "smtp" smtp 3.20
443 public_name string unset authenticators 3.10
444 qualify_domain string + main
445 string* unset redirect 4.31
446 qualify_preserve_domain boolean false redirect 4.00
447 qualify_recipient string + main
448 qualify_single boolean true dnslookup 4.00
449 query string* + iplookup 4.00
450 queue_domains domain list unset main 4.00
451 queue_fast_ramp boolean false main 4.95
452 queue_list_requires_admin boolean true main 1.95
453 queue_only boolean false main
454 queue_only_file string unset main 2.05
455 queue_only_load fixed-point unset main
456 queue_only_load_latch boolean true main 4.68
457 queue_only_override boolean true main 4.21
458 queue_run_in_order boolean false main 1.70
459 queue_run_max integer 5 main
460 queue_smtp_domains domain list unset main
461 quota string* unset appendfile 1.60
462 quota_directory string* unset appendfile 4.11
463 quota_filecount integer 0 appendfile 2.05
464 quota_is_inclusive boolean true appendfile 3.20
465 quota_size_regex string unset appendfile 3.14
466 quota_warn_message string* + appendfile 2.10
467 quota_warn_threshold string* 0 appendfile 2.10
468 rcpt_include_affixes boolean false transports 4.21
469 receive_timeout time 0s main 4.00 replacing accept_timeout
470 received_header_text string* + main
471 received_headers_max integer 30 main
472 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
473 recipients_max integer 50000 main 1.60 default changed in 4.95 (was 0)
474 recipients_max_reject boolean false main 1.70
475 redirect_router string unset routers 4.00
476 remote_max_parallel integer 1 main
477 remote_sort_domains domain list unset main 4.00 replacing remote_sort
478 repeat_use boolean true redirect 4.00
479 reply_to string* unset autoreply 2.05
480 reply_transport string* unset redirect 4.00
481 require_files string list* unset routers 4.00
482 reroute string* unset iplookup 4.00
483 response_pattern string unset iplookup 4.00
484 restrict_to_path boolean false pipe
485 retry_data_expire time 7d main 3.03
486 retry_include_ip_address boolean true smtp 1.92
487 retry_interval_max time 24h main
488 retry_use_local_part boolean + routers 4.00
489 + transports 4.00 replacing individual options
490 return_fail_output boolean false pipe 1.60
491 return_message boolean false autoreply
492 return_output boolean false pipe
493 return_path string* unset transports 2.05
494 return_path_add boolean false transports
495 return_path_remove boolean true main
496 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
497 rewrite boolean true redirect 4.00
498 rewrite_headers boolean true dnslookup 4.00
499 rfc1413_hosts host list * main
500 rfc1413_query_timeout time 5s main
501 router_home_directory string* unset routers 4.11
502 route_data string* unset manualroute 4.00
503 route_list string list unset manualroute 4.00
504 same_domain_copy_routing boolean false dnslookup 4.00
505 search_parents boolean false dnslookup 4.00
506 self string "freeze" routers 4.00
507 sender_unqualified_hosts host list unset main
508 senders address list unset routers 4.00
509 serialize_hosts host list unset smtp 1.60
510 server_advertise_condition string* unset authenticators 4.14
511 server_channelbinding bool false gsasl 4.80
512 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
513 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
514 server_keytab string* unset heimdal_gssapi 4.80
515 server_mail_auth_condition string* unset authenticators 3.22
516 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
517 server_password string unset gsasl 4.80
518 server_param1 string* unset tls (auth) 4.86
519 server_param2 string* unset tls (auth) 4.86
520 server_param3 string* unset tls (auth) 4.86
521 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
522 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
523 server_prompts string* unset plaintext 3.10
524 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
525 server_scram_iter string* unset gsasl 4.80
526 server_scram_salt string* unset gsasl 4.80
527 server_secret string* unset cram_md5 3.10
528 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
529 server_set_id string* unset authenticators 3.10
530 set string* unset routers 4.93
531 shadow_condition string* unset transports
532 shadow_transport string unset transports
533 size_addition integer 1024 smtp 1.91
534 skip_syntax_errors boolean false redirect 4.00
535 smtp_accept_keepalive boolean true main
536 smtp_accept_max integer 20 main
537 smtp_accept_max_nonmail integer 10 main 4.11
538 smtp_accept_max_nonmail_hosts host list * main 4.14
539 smtp_accept_max_per_connection integer 1000 main 4.00
540 smtp_accept_max_per_host integer 0 main 2.05
541 smtp_accept_queue integer 0 main
542 smtp_accept_queue_per_connection integer 10 main 2.03
543 smtp_accept_reserve integer 0 main
544 smtp_active_hostname string* unset main 4.33
545 smtp_backlog_monitor integer 0 main 4.95
546 smtp_banner string* + main
547 smtp_check_spool_space boolean true main 2.10
548 smtp_connect_backlog integer 5 main
549 smtp_enforce_sync boolean true main 4.00
550 smtp_etrn_command string* unset main 1.92
551 smtp_etrn_serialize boolean true main 1.89
552 smtp_load_reserve fixed-point unset main
553 smtp_max_synprot_errors integer 3 main 4.30
554 smtp_max_unknown_commands integer 3 main 4.14
555 smtp_ratelimit_hosts host list unset main 4.00
556 smtp_ratelimit_mail string unset main 4.00
557 smtp_ratelimit_rcpt string unset main 4.00
558 smtp_receive_timeout time 5m main
559 smtp_reserve_hosts host list unset main
560 smtp_return_error_details boolean false main 4.11
561 socket string* unset lmtp 4.11
562 spamd_address string* + main 4.50 with content scan
563 spf_guess string "v=spf1 a/24 mx/24 ptr ?all"
564 main 4.91 with SUPPORT_SPF
565 spf_smtp_comment_template string* "Please see http://www.open-spf.org/Why"
566 main 4.94 with SUPPORT_SPF
567 split_spool_directory boolean false main 1.70
568 spool_directory string ++ main
569 spool_wireformat boolean false main 4.90
570 sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
571 sqlite_lock_timeout time 5s main 4.53
572 strict_acl_vars boolean false main 4.64
573 srv_fail_domains domain list unset dnslookup 4.43
574 strip_excess_angle_brackets boolean false main
575 strip_trailing_dot boolean false main
576 subject string* unset autoreply
577 syntax_errors_text string* unset redirect 4.00
578 syntax_errors_to string unset redirect 4.00
579 syslog_duplication boolean true main 4.21
580 syslog_facility string unset main 4.20
581 syslog_processname string "exim" main 4.20
582 syslog_timestamp boolean true main 4.00
583 system_filter string unset main 4.00 replacing message_filter
584 system_filter_directory_transport string unset main 4.00 replacing message_filter
585 system_filter_file_transport string unset main 4.00 replacing message_filter
586 system_filter_group string unset main 4.00 replacing message_filter
587 system_filter_pipe_transport string unset main 4.00 replacing message_filter
588 system_filter_reply_transport string unset main 4.00 replacing message_filter
589 system_filter_user string unset main 4.00 replacing message_filter
590 tcp_nodelay boolean true main 4.23
592 tcp_wrappers_daemon_name string* ++ main 4.73
593 temp_errors string list + pipe 1.95
594 text string* unset autoreply
595 timeout time 5m lmtp 3.20
599 timeout_defer boolean false pipe 4.51
600 timeout_frozen_after time 0s main 3.20
601 timezone string + main 3.15
602 tls_advertise_hosts host list * main 3.20
603 tls_alpn string* unset main 4.95
605 tls_certificate string* unset main 3.20
607 tls_dh_max_bits integer 2236 main 4.80
608 tls_dh_min_bits integer 1024 smtp 4.82
609 tls_dhparam string* unset main 3.20
610 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
611 tls_on_connect_ports string unset main 4.43
612 tls_privatekey string* unset main 3.20
614 tls_remember_emstp boolean false main 4.21
615 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
616 string* unset main 4.33
617 tls_resumption_hosts host list* unset main 4.95
618 host list* unset smtp 4.95
619 tls_sni string* unset main 4.80
620 tls_tempfail_tryclear boolean true smtp 4.05
621 tls_try_verify_hosts host list unset main 4.00
622 tls_verify_certificates string* unset main 3.20
624 tls_verify_hosts host list unset main 3.20
625 to string* unset autoreply
626 translate_ip_address string unset routers 4.00
627 transport string* unset routers 4.00
628 transport_current_directory string unset routers 4.00
629 transport_home_directory string unset routers 4.00
630 transport_filter string unset transports
631 transport_filter_timeout time 5m transports 4.30
632 trusted_groups string list unset main
633 trusted_users string list unset main
634 umask octal-integer 022 pipe
635 unknown_login string unset main
636 unknown_username string unset main
637 unseen boolean false routers 4.00
638 untrusted_set_sender boolean false main 3.20
639 use_bsmtp boolean false appendfile 4.00
641 use_crlf boolean false appendfile 1.89
643 use_fcntl_lock boolean + appendfile 1.70
644 use_flock_lock boolean + appendfile 4.11
645 use_lockfile boolean + appendfile
646 use_mbx_lock boolean + appendfile 2.10
647 use_shell boolean false pipe 1.70
648 user string + routers 4.00
649 unset transports 4.00 replaces individual options
650 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
651 uucp_from_pattern string + main 1.75
652 uucp_from_sender string* "$1" main 1.75
653 verify boolean true routers 4.00
654 verify_only boolean false routers 4.00
655 verify_recipient boolean true routers 4.00
656 verify_sender boolean true routers 4.00
657 warn_message_file string* unset main 4.00 expanded from 4.94
658 widen_domains string list unset dnslookup 4.00
659 write_rejectlog boolean true main 4.31
663 2. COMMAND LINE OPTIONS
664 -----------------------
666 The table below contains a complete list of all Exim's command line options.
667 Those marked with # are available only to trusted users, those marked with +
668 are available only to admin users, and those marked with * exist only to
669 provide compatibility with Sendmail.
672 --help Give a little help (not a lot)
673 --version Give version information (alias for -bV)
676 -bdf + Start daemon and run it in the foreground
677 -be Test string expansion
678 -bem Test string expansion, read test message first
679 -bF Test system filter file
680 -bf Test user filter file
681 -bfd Set domain for filter testing
682 -bfl Set local part for filter testing
683 -bfp Set local part prefix for filter testing
684 -bfs Set local part suffix for filter testing
685 -bh Test incoming SMTP call, omitting callouts
686 -bhc Test incoming SMTP call, with callouts
687 -bi * Run <command>bi_command</command>
688 -bI:help Show list of accepted -bI:<tag> options
689 -bm Accept message on standard input
690 -bmalware + Invoke configured malware scanning against supplied filename
691 -bnq Don't qualify addresses in locally submitted messages
692 -bP Show configuration option settings
694 -bpa + ... with generated addresses as well
695 -bpc + ... but just show a count of messages
696 -bpr + ... do not sort
697 -bpra + ... with generated addresses, unsorted
698 -bpru + ... only undelivered addresses, unsorted
699 -bpu + ... only undelivered addresses
700 -brt Test retry rules
701 -brw Test rewriting rules
702 -bS Read batch SMTP on standard input
703 -bs Run SMTP on standard input and output
704 -bt Test address directing and routing
705 -bV Verify version number
706 -bv Test recipient address verification
707 -bvs Test sender address verification
708 -bw + Inetd wait mode
709 -C + Use alternate configuration file
710 -D + Define macro for configuration file
711 -d + Turn on debugging output
712 -dd + Ditto, but if a daemon, not for subprocesses
713 -dropcr Remove CR character in input: became a no-op in 4.21
715 -ex * Synonym for -oex (for several different x)
716 -F Set calling user name
717 -f # Set calling user address
720 -i Dot does not terminate message
721 -M + Force deliver specific message
722 -Mar + Add recipient to message
723 -MC Internal use only
724 -MCA Internal use only
725 -MCP Internal use only
726 -MCQ Internal use only
727 -MCS Internal use only
728 -MCT Internal use only
729 -Mc + Deliver specific message
730 -Mes + Edit message sender
731 -Mf + Freeze message(s)
732 -Mg + Give up (bounce) message(s)
733 -Mmad + Mark all recipients delivered
734 -Mmd + Mark one recipient delivered
735 -Mrm + Remove message(s) (no bounce)
736 -Mset + Load message's variables when testing with -be
737 -Mt + Thaw message(s)
738 -Mvb + View message body
739 -Mvc + View entire message in RFC 2822 format
740 -Mvh + View message header
741 -Mvl + View message log
743 -N + Deliver without transporting
746 -oA * Supply argument for <option>-bi</option>
747 -oB Set max messages down one connection
748 -odb Background delivery
749 -odf Foreground delivery
750 -odi Foreground delivery
751 -odq Queue message; do not deliver
752 -odqs ... do not do SMTP deliveries
753 -oee Error sent by mail; zero return code
754 -oem Error sent by mail; non-zero return code
755 -oep Error written to standard error stream
756 -oeq * Error written to standard error stream
757 -oew * Error sent by mail; non-zero return code
758 -oi Dot does not terminate message
759 -oitrue * Dot does not terminate message
760 -oMa # Supply host address
761 -oMaa # Supply authenticator name
762 -oMai # Supply authenticated id
763 -oMas # Supply authenticated sender
764 -oMi # Supply interface address
765 -oMm # Supply message reference
766 -oMr # Supply protocol name
767 -oMs # Supply host name
768 -oMt # Supply ident string
771 -oP * Specify path for daemon's pid file
772 -or Timeout non-SMTP messages
773 -os Timeout for SMTP messages
774 -ov * Verbose; same as -v
775 -oX Alternative port for daemon
776 -pd Delay Perl interpreter start
777 -ps Do not delay Perl interpreter start
778 -p<r>:<s> * Same as -oMr <r> -oMs <s>
780 -qf + ... force delivery ) Other combinations are
781 -qff + ... and include frozen messages ) possible. The syntax is
782 -qi + ... initial deliveries only )
783 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
784 -qq + Two-stage queue run )
787 -R Select by recipient in queue run
789 -Rff ... and frozen messages
790 -Rr ... using regular expression
791 -Rrf ... with forcing
792 -Rrff ... and frozen messages
794 -S Select by sender in queue run
796 -Sff ... and frozen messages
797 -Sr ... using regular expression
798 -Srf ... with forcing
799 -Srff ... and frozen messages
800 -Tqt * Used by Exim test suite; not recognized in normal use
801 -t Take recipients from header lines
803 -tls-on-connect Do TLS on startup (for legacy clients)
805 -v Verbose - shows SMTP dialogue and other delivery info
806 -x Ignored (AIX compatibility)
809 3. BUILD TIME OPTIONS FOR EXIM
810 ------------------------------
812 The table below contains a "mostly" complete list of options that can be
813 set in Local/Makefile when building Exim. The only items not included are
814 those whose names can be trivially derived from rules stated below.
816 More information about individual options can be found in src/EDITME and
819 The second column below gives the type of option:
821 . `system' means the option is concerned with the operating system;
823 . `driver' means the option selects a driver to be included in the binary;
825 . `lookup' means the option selects a lookuptype to be included in the binary;
827 . `mandatory' means the option is required to be supplied;
829 . `recommended' means the option is recommended to be supplied;
831 . `optional' means what it says;
833 Those marked with * are specialized and are unlikely to be required in most
834 installations. Those that are marked with ** are commonly set in OS-specific
835 Makefiles. If you use any of these in your Local/Makefile, you may need to
836 reproduce some of the OS-specific settings. For example, in the Makefile for
837 Solaris (which is actually called OS/Makefile-SunOS5), there is
839 LIBS=-lsocket -lnsl -lkstat
841 If you use LIBS to add extra libraries, you must also include the OS ones in
842 your setting. It is better, in this particular case, to use EXTRALIBS, which is
843 empty by default, and is provided for just this reason. Of course, if you do
844 actually want to modify a setting from the OS-specific file, there is nothing
845 to stop you overriding it in your Local/Makefile.
847 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
848 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
849 libraries specific only to that module. These rules are only used where the
850 relevant lookup is a module. These options are not explicitly listed below.
852 Variables with names endined `_PC' are used for pkg-config integration; setting
853 the value to the name of a pkg-config package will cause Exim's build system to
854 query the --cflags and --libs for the given name, when building anything
855 dependent upon the component associated with the `_PC' variable. For lookups,
856 if the lookup is dynamically loaded, then this *replaces* the use of the
857 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
858 is statically loaded into Exim, the results will be inserted into the
859 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
860 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
861 only listed below for the TLS implementation cases.
864 Option Type Description
865 ------------------------------------------------------------------------------
867 ALT_CONFIG_PREFIX optional restricts location of -C files
868 APPENDFILE_MODE optional*
869 APPENDFILE_DIRECTORY_MODE optional*
870 APPENDFILE_LOCKFILE_MODE optional*
871 AR system command to build a library
872 AUTH_CRAM_MD5 driver include cram_md5 authenticator
873 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
874 AUTH_GSASL driver include GNU SASL authenticator
875 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
876 AUTH_LIBS system library linkage for authenticators
877 AUTH_PLAINTEXT driver include plaintext authenticator
878 AUTH_SPA driver include SPA (NTLM) authenticator
879 AUTH_VARS=3 optional* number of $auth variables
880 BASENAME_COMMAND system** path to basename
881 BASE_62=62 optional* not normally changed for Unix
882 BIN_DIRECTORY mandatory Exim binary directory
883 CC system** C compiler
884 CFLAGS system** flags for C compiler
885 CFLAGS_DYNAMIC system** extra flags needed for .so modules
886 CHGRP_COMMAND system** path to chgrp
887 CHOWN_COMMAND system** path to chown
888 COMPRESS_COMMAND system path to a compress command
889 COMPRESS_SUFFIX system suffix added to compressed files
890 CONFIGURE_FILE mandatory Exim runtime configuration file
891 CONFIGURE_FILE_USE_EUID optional*
892 CONFIGURE_FILE_USE_NODE optional*
893 CONFIGURE_GROUP optional* alternate group for configuration file
894 CONFIGURE_OWNER optional* alternate owner for configuration file
895 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
896 DBMLIB optional** location of DBM library
897 DB_DIRECTORY_MODE optional* mode for hints directory
898 DB_LOCKFILE_MODE optional* mode for hints lock files
899 DB_LOCK_TIMEOUT optional* timeout for hints lock files
900 DB_MODE optional* mode for hints files
901 DEFAULT_CRYPT optional default crypt() function
902 DELIVER_IN_BUFFER_SIZE optional*
903 DELIVER_OUT_BUFFER_SIZE optional*
904 DISABLE_DKIM optional disables DKIM support
905 DISABLE_DNSSEC optional disables attempts to use DNSSEC
906 DISABLE_D_OPTION optional disables -D option
907 ERRNO_QUOTA optional* error code for system quota failures
908 EXICYCLOG_MAX optional number of old log files to keep
909 EXIMDB_DIRECTORY_MODE optional* for hints database directory
910 EXIMDB_LOCKFILE_MODE optional* for hints lock files
911 EXIMDB_MODE optional* mode for hints files
912 EXIMON_TEXTPOP system**
914 EXIM_GROUP mandatory group to use for Exim
915 EXIM_MONITOR optional set to eximon.bin to compile
917 EXIM_USER mandatory user to use for Exim
918 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
919 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
920 EXIWHAT_MULTIKILL_CMD system**
921 EXIWHAT_MULTIKILL_ARG system**
922 EXIWHAT_PS_ARG system** to list all processes
923 EXIWHAT_PS_CMD system** path to ps command
924 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
925 EXTRALIBS system additional libraries
926 EXTRALIBS_EXIM system additional libraries for Exim only
927 EXTRALIBS_EXIMON system additional libraries for the monitor
928 FIXED_NEVER_USERS optional can't override at runtime
929 HAVE_ICONV system the iconv() function is available
930 HAVE_IPV6 system include IPv6 support
931 HEADERS_CHARSET optional charset for decoded header lines
932 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
933 HEADER_MAXSIZE optional* max memory for message header
934 HOSTNAME_COMMAND system** path to hostname command
935 INCLUDE system path to include files
936 INFO_DIRECTORY optional directory for Info documentation
937 INPUT_DIRECTORY_MODE optional mode for input directory
938 IPV6_INCLUDE system additional includes for IPv6
939 IPV6_LIBS system additional libraries for IPv6
940 LDAP_LIB_TYPE optional type of LDAP library
941 LFLAGS system** link editor flags
942 LIBIDENTCFLAGS system C flags when compiling libident
943 LIBIDENTNAME system name for libident library
944 LIBRESOLV system** library for DNS resolver
945 LIBS system** additional libraries
946 LIBS_EXIM system** additional libraries for Exim ony
947 LIBS_EXIMON system** additional libraries for monitor
948 LOCAL_SCAN_SOURCE optional location of local_scan() source
949 LOG_DIRECTORY_MODE optional mode for log directory
950 LOG_FILE_PATH optional path to log files
951 LOG_MODE optional mode for log files
952 LOOKUP_CDB lookup include cdb lookup
953 LOOKUP_DBM lookup include dbm lookup
954 LOOKUP_DNSDB lookup include dnsdb lookup
955 LOOKUP_DSEARCH lookup include dsearch lookup
956 LOOKUP_INCLUDE lookup include files for lookups
957 LOOKUP_LDAP lookup include ldap lookup
958 LOOKUP_LIBS lookup include libraries for lookups
959 LOOKUP_LSEARCH lookup include all lsearch lookups
960 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
961 LOOKUP_MYSQL lookup include mysql lookup
962 LOOKUP_NIS lookup include nis lookup
963 LOOKUP_NISPLUS lookup include nisplus lookup
964 LOOKUP_ORACLE lookup include oracle lookup
965 LOOKUP_PGSQL lookup include pgsql lookup
966 LOOKUP_TESTDB lookup*
967 LOOKUP_WHOSON lookup include whoson lookup
968 LOOKUP_*_INCLUDE optional* include files for dynamic module
969 LOOKUP_*_LIBS optional* libraries for dynamic module
970 MAKE_SHELL optional* shell to use for make
971 MAX_FILTER_SIZE optional* max file size for filter files
972 MAX_INCLUDE_SIZE optional* max file size for :include: files
973 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
974 MAX_NAMED_LIST optional* max named lists of a given type
975 MAX_INTERFACES system maximum network interfaces
976 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
977 MV_COMMAND system path to mv command
978 NO_SYMLINK optional install doesn't make 'exim" symlink
979 PCRE_CONFIG system* use pcre-config for PCRE support
980 PCRE_LIBS system* library for using PCRE
981 PERL_CC system* compiler for Perl interface code
982 PERL_CCOPTS system* flags for same
983 PERL_COMMAND system path to Perl
984 PERL_LIBS system* library for compiling Perl interface
985 PID_FILE_PATH optional path to daemon's pid file
986 RADIUS_CONFIG_FILE optional path to Radius config file
987 RADIUS_LIB_TYPE optional type of RADIUS library
988 RANLIB system** path to ranlib command
989 RM_COMMAND system path to rm command
990 ROUTER_ACCEPT driver include accept router
991 ROUTER_DNSLOOKUP driver include dnslookup router
992 ROUTER_MANUALROUTE driver include manualroute router
993 ROUTER_IPLITERAL driver include ipliteral router
994 ROUTER_IPLOOKUP driver include iplookup router
995 ROUTER_REDIRECT driver include redirect router
996 ROUTER_QUERYPROGRAM driver include queryprogram router
997 SPOOL_DIRECTORY recommended path to spool directory
998 SPOOL_DIRECTORY_MODE optional mode of spool directory
999 SPOOL_MODE optional mode of spool files
1000 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
1001 STRIP_COMMAND optional* can be used to strp binaries
1002 SUPPORT_A6 optional* support A6 DNS records
1003 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
1004 SUPPORT_MAILDIR optional support for maildir delivery
1005 SUPPORT_MAILSTORE optional support for mailstore delivery
1006 SUPPORT_MBX optional support for MBX delivery
1007 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
1008 SUPPORT_PAM optional support for PAM authentication
1009 SUPPORT_TLS optional support for TLS encryption over SMTP
1010 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
1011 SYSLOG_LOG_PID optional add pid to syslog lines
1012 SYSLOG_LONG_LINES optional do not split long syslog lines
1013 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
1014 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
1015 TIMEZONE_DEFAULT optional default for timezone option
1016 TLS_INCLUDE optional path to include files for TLS
1017 TLS_LIBS optional additional libraries for TLS
1018 EXIM_TMPDIR system value for TMPDIR environment variable
1019 TRANSPORT_APPENDFILE driver include appendfile transport
1020 TRANSPORT_AUTOREPLY driver include autoreply transport
1021 TRANSPORT_LMTP driver include lmtp transport
1022 TRANSPORT_PIPE driver include pipe transport
1023 TRANSPORT_SMTP driver include smtp transport
1024 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1025 USE_DB system** use native DB interface
1026 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1027 USE_GNUTLS_PC optional probably "gnutls"
1028 USE_OPENSSL_PC optional probably "openssl"
1029 USE_READLINE optional try to load libreadline for -be
1030 USE_TCP_WRAPPERS system link with tcpwrappers
1031 USE_TDB optional use the tdb DB interface
1032 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1033 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1034 X11 system** X11 base directory
1035 X11_LD_LIB system** X11 link library
1036 XINCLUDE system** X11 include directory
1037 XLFLAGS system** X11 link time flags
1038 ZCAT_COMMAND system path to zcat command
1041 4. BUILD TIME OPTIONS FOR EXIMON
1042 --------------------------------
1044 The table below contains a complete list of options that can be set in
1045 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1046 ** it means that the text string is too long to fit in the table and is instead
1047 given below. A blank default means that there is no default value.
1049 ACTION_OUTPUT=no show output for every action
1050 ACTION_QUEUE_UPDATE=yes update queue display after actions
1051 BODY_MAX=20000 maximum body display
1052 DOMAIN= domain to strip from window title
1053 LOG_BUFFER=20K buffer for log tail
1054 LOG_DEPTH=300 depth of log subwindow
1055 LOG_FONT=** font for log display
1056 LOG_STRIPCHARTS=** patterns for stripcharts
1057 LOG_WIDTH=950 width of log subwindow
1058 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1059 MIN_HEIGHT=162 minimum window height
1060 MIN_WIDTH=103 minimum window width
1061 QUALIFY_DOMAIN= local domain to strip from addresses
1062 QUEUE_DEPTH=200 depth of queue subwindow
1063 QUEUE_FONT=$LOG_FONT font for queue display
1064 QUEUE_INTERVAL=300 queue refresh interval
1065 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1066 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1067 QUEUE_WIDTH=950 width of queue subwindow
1068 SIZE_STRIPCHART= request partition size stripchart
1069 SIZE_STRIPCHART_NAME=space name for size stripchart
1070 START_SMALL=no if yes, start with small window
1071 STRIPCHART_INTERVAL=60 stripchart refresh interval
1072 TEXT_DEPTH=200 depth of text windows
1073 WINDOW_TITLE="${hostname} eximon" window title
1075 The default for LOG_FONT is
1077 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1079 and the default for LOG_STRIPCHARTS is
1081 LOG_STRIPCHARTS='/ <= /in/
1083 / => .+ R=local/local/
1084 / => .+ T=[^ ]*smtp/smtp/'
1086 That is, there are four stripcharts, named in, out, local, and smtp. The first
1087 counts message arrivals, the second counts all deliveries, the third counts
1088 deliveries where the router's name starts with "local", and the fourth counts
1089 deliveries where the transport name contains "smtp".
1091 **** End of OptionLists ****
git://git.exim.org / exim.git / blob