Limit retry_interval_max to 24h to avoid overflow problems.
[exim.git] / doc / doc-txt / ChangeLog
1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.311 2006/02/22 15:08:20 ph10 Exp $
2
3 Change log file for Exim from version 4.21
4 -------------------------------------------
5
6 Exim version 4.61
7 -----------------
8
9 PH/01 The code for finding all the local interface addresses on a FreeBSD
10       system running IPv6 was broken. This may well have applied to all BSD
11       systems, as well as to others that have similar system calls. The broken
12       code found IPv4 interfaces correctly, but gave incorrect values for the
13       IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
14       that it would not match correctly against @[] and not recognize the IPv6
15       addresses as local.
16
17 PH/02 The ipliteral router was not recognizing addresses of the form user@
18       [ipv6:....] because it didn't know about the "ipv6:" prefix.
19
20 PH/03 Added disable_ipv6.
21
22 PH/04 Changed $reply_address to use the raw form of the headers instead of the
23       decoded form, because it is most often used to construct To: headers
24       lines in autoreplies, and the decoded form may well be syntactically
25       invalid. However, $reply_address has leading white space removed, and all
26       newlines turned into spaces so that the autoreply transport does not
27       grumble.
28
29 PH/05 If group was specified without a user on a router, and no group or user
30       was specified on a transport, the group from the router was ignored.
31
32 PH/06 Increased the number of ACL variables to 20 of each type, and arranged
33       for visible compile-time settings that can be used to change these
34       numbers, for those that want even more. Backwards compatibility with old
35       spool files has been maintained. However, going back to a previous Exim
36       release will lost any variables that are in spool files.
37
38 PH/07 Two small changes when running in the test harness: increase delay when
39       passing a TCP/IP connection to a new process, in case the original
40       process has to generate a bounce, and remove special handling of
41       127.0.0.2 (sic), which is no longer necessary.
42
43 PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
44       be the same on different OS.
45
46 PH/09 Moved a debug statement in filter processing to avoid a race problem when
47       testing.
48
49 JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
50       whether --show-vars was specified or not
51
52 JJ/02 exipick: Added support for new ACL variable spool format introduced
53       in 4.61-PH/06
54
55 PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
56       syntactically invalid From: or Reply-to: line, and a filter used this to
57       generate an autoreply, and therefore failed to obtain an address for the
58       autoreply, Exim could try to deliver to a non-existent relative file
59       name, causing unrelated and misleading errors. What now happens is that
60       it logs this as a hard delivery error, but does not attempt to create a
61       bounce message.
62
63 PH/11 The exinext utility has a -C option for testing purposes, but although
64       the given file was scanned by exinext itself; it wasn't being passed on
65       when Exim was called.
66
67 PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
68       an end-of-file indication when reading a command response.
69
70 PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
71       compiled. In many other places in Exim, IPv6 addresses are always
72       recognized, so I have changed this. It also means that IPv4 domain
73       literals of the form [IPV4:n.n.n.n] are now always recognized.
74
75 PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
76       used if the router is not running as root, for example, when verifying at
77       ACL time, or when using -bh. The debugging output from this situation was
78       non-existent - all you got was a failure to exec. I have made two
79       changes:
80
81       (a) Failures to set uid/gid, the current directory, or a process leader
82           in a subprocess such as that created by queryprogram now generate
83           suitable debugging ouput when -d is set.
84
85       (b) The queryprogram router detects when it is not running as root,
86           outputs suitable debugging information if -d is set, and then runs
87           the subprocess without attempting to change uid/gid.
88
89 PH/15 Minor change to Makefile for building test_host (undocumented testing
90       feature).
91
92 PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
93       additional section of a DNS packet that returns MX or SRV records.
94       Instead, it always explicitly searches for A/AAAA records. This avoids
95       major problems that occur when a DNS server includes only records of one
96       type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
97       fixed another bug: if SRV records were looked up and the corresponding
98       address records were *not* found in the additional section, the port
99       values from the SRV records were lost.
100
101 PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
102       using the correct key (the original address) when searching the retry
103       rules in order to find which one to use for generating the retry hint.
104
105 PH/18 If quota_warn_message contains a From: header, Exim now refrains from
106       adding the default one. Similarly, if it contains a Reply-To: header, the
107       errors_reply_to option, if set, is not used.
108
109 PH/19 When calculating a retry time, Exim used to measure the "time since
110       failure" by looking at the "first failed" field in the retry record. Now
111       it does not use this if it is later than than the arrival time of the
112       message. Instead it uses the arrival time. This makes for better
113       behaviour in cases where some deliveries succeed, thus re-setting the
114       "first failed" field. An example is a quota failure for a huge message
115       when small messages continue to be delivered. Without this change, the
116       "time since failure" will always be short, possible causing more frequent
117       delivery attempts for the huge message than are intended.
118
119 PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
120       $1, $2, $3) because the numerical variables can be reset during some
121       expansion items (e.g. "match"), thereby losing the authentication data.
122
123 PH/21 Make -bV show the size of off_t variables so that the test suite can
124       decide whether to run tests for quotas > 2G.
125
126 PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold,
127       mailbox_size, and mailbox_filecount in the appendfile transport. If a
128       filecount value is greater than 2G or if a quota value is greater than 2G
129       on a system where the size of off_t is not greater than 4, a panic error
130       is given.
131
132 PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can
133       never match. The debug and -bh output now contains an explicit error
134       message indicating a malformed IPv4 address or mask.
135
136 PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address
137       1.2.3.4 without a mask. Now it is not recognized as an IP address, and
138       PH/23 above applies.
139
140 PH/25 Do not write to syslog when running in the test harness. The only
141       occasion when this arises is a failure to open the main or panic logs
142       (for which there is an explicit test).
143
144 PH/26 Added the /no_tell option to "control=freeze".
145
146 PH/27 If a host name lookup failed very early in a connection, for example, if
147       the IP address matched host_lookup and the reverse lookup yielded a name
148       that did not have a forward lookup, an error message of the form "no IP
149       address found for host xxx.xxx.xxx (during SMTP connection from NULL)"
150       could be logged. Now it outputs the IP address instead of "NULL".
151
152 PH/28 An enabling patch from MH: add new function child_open_exim2() which
153       allows the sender and the authenticated sender to be set when
154       submitting a message from within Exim. Since child_open_exim() is
155       documented for local_scan(), the new function should be too.
156
157 PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being
158       ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that
159       results in an empty string is now treated as unset.
160
161 PH/30 Fix eximon buffer overflow bug (Bugzilla #73).
162
163 PH/31 Added sender_verify_fail logging option.
164
165 PH/32 In November 2003, the code in Exim that added an empty Bcc: header when
166       needed by RFC 822 but not by RFC 2822 was commented out. I have now
167       tidied the source and removed it altogether.
168
169 PH/33 When a queue run was abandoned because the load average was too high, a
170       log line was always written; now it is written only if the queue_run log
171       selector is set. In addition, the log line for abandonment now contains
172       information about the queue run such as the pid. This is always present
173       in "start" and "stop" lines but was omitted from the "abandon" line.
174
175 PH/34 Omit spaces between a header name and the colon in the error message that
176       is given when verify = headers_syntax fails (if there are lots of them,
177       the message gets confusing).
178
179 PH/35 Change the default for dns_check_names_pattern to allow slashes within
180       names, as there are now some PTR records that contain slashes. This check
181       is only to protect against broken name servers that fall over on strange
182       characters, so the fact that it applies to all lookups doesn't matter.
183
184 PH/36 Now that the new test suite is complete, we can remove some of the
185       special code in Exim that was needed for the old test suite. For example,
186       sorting DNS records because real resolvers return them in an arbitrary
187       order. The new test suite's fake resolver always returns records in the
188       same order.
189
190 PH/37 When running in the test harness, use -odi for submitted messages (e.g.
191       bounces) except when queue_only is set, to avoid logging races between
192       the different processes.
193
194 PH/38 Panic-die if .include specifies a non-absolute path.
195
196 PH/39 A tweak to the "H" retry rule from its user.
197
198 JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified
199       a label.  They prevented compilation on older perls.
200
201 JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused
202       a warning to be raised on newish perls.
203
204 JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages
205       on queue.  Changes to match documented behaviour of showing count of
206       messages matching specified criteria.
207
208 PH/40 Changed the default ident timeout from 30s to 5s.
209
210 PH/41 Added support for the use of login_cap features, on those BSD systems
211       that have them, for controlling the resources used by pipe deliveries.
212
213 PH/42 The content-scanning code uses fopen() to create files in which to put
214       message data. Previously it was not paying any attention to the mode of
215       the files. Exim runs with umask(0) because the rest of the code creates
216       files with open(), and sets the required mode explicitly. Thus, these
217       files were ending up world-writeable. This was not a big issue, because,
218       being within the spool directory, they were not world-accessible. I have
219       created a function called modefopen, which takes an additional mode
220       argument. It sets umask(777), creates the file, chmods it to the required
221       mode, then resets the umask. All the relevant calls to fopen() in the
222       content scanning code have been changed to use this function.
223
224 PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset
225       to 24 hours. This avoids potential overflow problems when processing G
226       and H retry rules. I suspect nobody ever tinkers with this value.
227
228
229 Exim version 4.60
230 -----------------
231
232 PH/01 Two changes to the default runtime configuration:
233
234       (1) Move the checks for relay_from_hosts and authenticated clients from
235           after to before the (commented out) DNS black list checks.
236
237       (2) Add control=submission to the relay_from_hosts and authenticated
238           clients checks, on the grounds that messages accepted by these
239           statements are most likely to be submissions.
240
241 PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
242
243       (1) Generate an error if the third argument for the ${prvs expansion is
244           not a single digit.
245
246       (2) Treat a missing third argument of ${prvscheck as if it were an empty
247           string.
248
249       (3) Reset the variables that are obtained from the first argument of
250           ${prvscheck and used in the second argument before leaving the code,
251           because their memory is reclaimed, so using them afterwards may do
252           silly things.
253
254       (4) Tidy up the code for expanding the arguments of ${prvscheck one by
255           one (it's much easier than Tom thought :-).
256
257       (5) Because of (4), we can now allow for the use of $prvscheck_result
258           inside the third argument.
259
260 PH/03 For some reason, the default setting of PATH when running a command from
261       a pipe transport was just "/usr/bin". I have changed it to
262       "/bin:/usr/bin".
263
264 PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
265       anything to be listed in the output from -bV.
266
267 PH/05 When a filter generated an autoreply, the entire To: header line was
268       quoted in the delivery log line, like this:
269
270         => >A.N.Other <ano@some.domain> <original@ddress> ...
271
272       This has been changed so that it extracts the operative address. There
273       may be more than one such address. If so, they are comma-separated, like
274       this:
275
276         => >ano@some.domain,ona@other.domain <original@ddress> ...
277
278 PH/06 When a client host used a correct literal IP address in a HELO or EHLO
279       command, (for example, EHLO [1.2.3.4]) and the client's IP address was
280       not being looked up in the rDNS to get a host name, Exim was showing the
281       IP address twice in Received: lines, even though the IP addresses were
282       identical. For example:
283
284         Received: from [1.2.3.4] (helo=[1.2.3.4])
285
286       However, if the real host name was known, it was omitting the HELO data
287       if it matched the actual IP address. This has been tidied up so that it
288       doesn't show the same IP address twice.
289
290 PH/07 When both +timestamp and +memory debugging was on, the value given by
291       $tod_xxx expansions could be wrong, because the tod_stamp() function was
292       called by the debug printing, thereby overwriting the timestamp buffer.
293       Debugging no longer uses the tod_stamp() function when +timestamp is set.
294
295 PH/08 When the original message was included in an autoreply transport, it
296       always said "this is a copy of the message, including all the headers",
297       even if body_only or headers_only was set. It now gives an appropriate
298       message.
299
300 PH/09 Applied a patch from the Sieve maintainer which:
301
302       o  fixes some comments
303       o  adds the (disabled) notify extension core
304       o  adds some debug output for the result of if/elsif tests
305       o  points to the current vacation draft in the documentation
306          and documents the missing references header update
307
308       and most important:
309
310       o  fixes a bug in processing the envelope test (when testing
311          multiple envelope elements, the last element determinted the
312          result)
313
314 PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
315       Electronic Mail") by including:
316
317         Auto-submitted: auto-generated
318
319       in the messages that it generates (bounce messages and others, such as
320       warnings). In the case of bounce messages for non-SMTP mesages, there was
321       also a typo: it was using "Auto_submitted" (underscore instead of
322       hyphen). Since every message generated by Exim is necessarily in response
323       to another message, thes have all been changed to:
324
325         Auto-Submitted: auto-replied
326
327       in accordance with these statements in the RFC:
328
329         The auto-replied keyword:
330
331         -  SHOULD be used on messages sent in direct response to another
332            message by an automatic process,
333
334         -  MUST NOT be used on manually-generated messages,
335
336         -  MAY be used on Delivery Status Notifications (DSNs) and Message
337            Disposition Notifications (MDNs),
338
339         -  MUST NOT be used on messages generated by automatic or periodic
340            processes, except for messages which are automatic responses to
341            other messages.
342
343 PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
344       to the default Received: header definition.
345
346 PH/12 Added log selector acl_warn_skipped (default on).
347
348 PH/13 After a successful wildlsearch lookup, discard the values of numeric
349       variables because (a) they are in the wrong storage pool and (b) even if
350       they were copied, it wouldn't work properly because of the caching.
351
352 PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
353       checking when decoding. Apparently there are clients that generate
354       overlong encoded strings. Why am I not surprised?
355
356 PH/15 If the first argument of "${if match_address" was not empty, but did not
357       contain an "@" character, Exim crashed. Now it writes a panic log message
358       and treats the condition as false.
359
360 PH/16 In autoreply, treat an empty string for "once" the same as unset.
361
362 PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
363       extension "envelope-auth".  The code is finished and in agreement with
364       other implementations, but there is no documentation so far and in fact,
365       nobody wrote the draft yet.  This extension is currently #undef'ed, thus
366       not changing the active code.
367
368       Print executed "if" and "elsif" statements when debugging is used. This
369       helps a great deal to understand what a filter does.
370
371       Document more things not specified clearly in RFC3028.  I had all this
372       sorted out, when out of a sudden new issues came to my mind.  Oops."
373
374 PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
375       (Bugzilla #53).
376
377 PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
378       canonical form (as documented). However, after a host name lookup from
379       the IP address, check_host() was doing a simple string comparison with
380       addresses acquired from the DNS when checking that the found name did
381       have the original IP as one of its addresses. Since any found IPv6
382       addresses are likely to be in abbreviated form, the comparison could
383       fail. Luckily, there already exists a function for doing the comparison
384       by converting both addresses to binary, so now that is used instead of
385       the text comparison.
386
387 PH/20 There was another similar case to PH/19, when a complete host name was
388       given in a host list; looking up its IP address could give an abbreviated
389       form, whereas the current host's name might or might not be abbreviated.
390       The same fix has been applied.
391
392
393 Exim version 4.54
394 -----------------
395
396 PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
397       set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
398       It now does.
399
400 PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
401       the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
402
403 PH/03 Typo: missing ".o" in src/pcre/Makefile.
404
405 PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
406       header line, restrict the check to what is listed in RFCs 2369 and 2929.
407       Also, for "Auto-Submitted", treat anything other than "no" as
408       non-personal, in accordance with RFC 3834. (Previously it treated
409       anything starting "auto-" as non-personal.)
410
411 TF/01 The control=submission/name=... option had a problem with syntax
412       errors if the name included a slash character. The /name= option
413       now slurps the rest of the string, so it can include any characters
414       but it must come last in the list of options (after /sender_retain
415       or /domain=).
416
417 PH/05 Some modifications to the interface to the fake nameserver for the new
418       testing suite.
419
420
421
422 Exim version 4.53
423 -----------------
424
425 TK/01 Added the "success_on_redirect" address verification option. See
426       NewStuff for rationale and an example.
427
428 PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
429
430 PH/02 Patch to exigrep to allow it to work on syslog lines.
431
432 PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
433       fread() to skip over the body file's header line, because in Cygwin the
434       header line is locked and is inaccessible.
435
436 PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
437       co-exist for some time) to make it clear that it is the Exim ID that is
438       referenced, not the Message-ID: header line.
439
440 PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
441       string_format() function, because snprintf() does not exist on all
442       operating systems.
443
444 PH/06 The use of forbid_filter_existstest now also locks out the use of the
445       ${stat: expansion item.
446
447 PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
448       protocol synchronization error", to keep the pedants happy.
449
450 PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
451       well as for IRIX systems, when gcc is being used. See the host.c source
452       file for comments.
453
454 PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
455
456 PH/10 Named domain lists were not working if used in a queue_smtp_domains
457       setting.
458
459 PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
460       transport and to the smtp transport in LMTP mode.
461
462 TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
463
464 PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
465       run a filter in a subprocess. This could lead to confusion in subsequent
466       lookups in the parent process. There should also be a search_tidyup() at
467       the end of the subprocess.
468
469 PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
470       only if the host matched helo_try_verify_hosts, which caused the
471       verification to occur when the EHLO/HELO command was issued. The ACL just
472       tested the remembered result. Now, if a previous verification attempt has
473       not happened, "verify = helo" does it there and then.
474
475 JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
476
477 TK/03 Fix log output including CR from clamd.
478
479 PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
480       exist provoked a memory error which could cause a segfault.
481
482 PH/15 Installed PCRE 6.2
483
484 PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
485
486 PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
487       of the problem. Specifically, suggested +O2 rather than +O1 for the
488       HP-UX compiler.
489
490 PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
491
492 PH/20 If a delivery was routed to a non-standard port by means of an SRV
493       record, the port was not correctly logged when the outgoing_port log
494       selector was set (it logged the transort's default port).
495
496 PH/21 Added support for host-specific ports to manualroute, queryprogram,
497       fallback_hosts, and "hosts" in the smtp transport.
498
499 PH/22 If the log selector "outgoing_port" is set, the port is now also given on
500       host errors such as "Connection refused".
501
502 PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
503       authentication with radiusclient 0.4.9:
504
505       - Error returned from rc_read_config was caught wrongly
506       - Username/password not passed on to radius server due to wrong length.
507
508       The presumption is that some radiusclient API changes for 4.51/PH/17
509       were not taken care of correctly. The code is still untested by me (my
510       Linux distribution still has 0.3.2 of radiusclient), but it was
511       contributed by a Radius user.
512
513 PH/24 When doing a callout, the value of $domain wasn't set correctly when
514       expanding the "port" option of the smtp transport.
515
516 TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
517       while reading a MIME header. Thanks to Tom Hughes for a patch.
518
519 PH/24 Include config.h inside local_scan.h so that configuration settings are
520       available.
521
522 PH/25 Make $smtp_command_argument available after all SMTP commands. This means
523       that in an ACL for RCPT (for example), you can examine exactly what was
524       received.
525
526 PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
527       commands, but it was not correctly comparing the address with the actual
528       client host address. Thus, it would show the EHLO address in Received:
529       header lines when this was not necessary.
530
531 PH/27 Added the % operator to ${eval:}.
532
533 PH/28 Exim tries to create and chdir to its spool directory when it starts;
534       it should be ignoring failures (because with -C, for example, it has lost
535       privilege). It wasn't ignoring creation failures other than "already
536       exists".
537
538 PH/29 Added "crypteq" to the list of supported features that Exim outputs when
539       -bV or -d is used.
540
541 PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
542       because an input line was too long, either on its own, or by virtue of
543       too many continuations, the temporary file was not being removed, and the
544       return code was incorrect.
545
546 PH/31 Missing "BOOL" in function definition in filtertest.c.
547
548 PH/32 Applied Sieve patches from the maintainer.
549
550 TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
551
552 PH/33 Added "verify = not_blind".
553
554 PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
555       Local/Makefile (with some defaults set). These are used in built scripts
556       such as exicyclog, but they have never been used in the exim_install
557       script (though there are many overriding facilities there). I have
558       arranged that the exim_install script now takes note of these two
559       settings.
560
561 PH/35 Installed configuration files for Dragonfly.
562
563 PH/36 When a locally submitted message by a trusted user did not contain a
564       From: header, and the sender address was obtained from -f or from an SMTP
565       MAIL command, and the trusted user did not use -F to supply a sender
566       name, $originator_name was incorrectly used when constructing a From:
567       header. Furthermore, $originator_name was used for submission mode
568       messages from external hosts without From: headers in a similar way,
569       which is clearly wrong.
570
571 PH/37 Added control=suppress_local_fixups.
572
573 PH/38 When log_selector = +received_sender was set, and the addition of the
574       sender made the log line's construction buffer exactly full, or one byte
575       less than full, an overflow happened when the terminating "\n" was
576       subsequently added.
577
578 PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
579       when the result of a list match is failure because a DNS lookup failed.
580
581 PH/40 RM_COMMAND is now used in the building process.
582
583 PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
584       the "build-* directories that it finds.
585
586 PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
587       address in a domain literal was a prefix of an interface address.
588
589 PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
590       when verifying a sender address, unless rewrite_headers is false.
591
592 PH/44 Wrote a long comment about why errors_to addresses are verified as
593       recipients, not senders.
594
595 TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
596       the ratelimit ACL was added.
597
598 PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
599
600 PH/46 Added extra information about PostgreSQL errors to the error string.
601
602 PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
603       avoiding the need to install special zones in a real server. This is
604       backwards compatible; if it can't find the fake resolver, it drops back.
605       Thus, both old and new test suites can be run.
606
607 TF/02 Added util/ratelimit.pl
608
609 TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
610       clock is set back in time.
611
612 TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
613       Candler <B.Candler@pobox.com>.
614
615 TF/05 The fix for PH/43 was not completely correct; widen_domains is always
616       OK for addresses that are the result of redirections.
617
618 PH/48 A number of further additions for the benefit of the new test suite,
619       including a fake gethostbyname() that interfaces to the fake DNS resolver
620       (see PH/47 above).
621
622 TF/06 The fix for widen_domains has also been applied to qualify_single and
623       search_parents which are the other dnslookup options that can cause
624       header rewrites.
625
626 PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
627       type ("H").
628
629 PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
630
631 TF/07 Exim produced the error message "an SRV record indicated no SMTP
632       service" if it encountered an MX record with an empty target hostname.
633       The message is now "an MX or SRV record indicated no SMTP service".
634
635 TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
636       if the DNS of the sending site is misconfigured. This is quite a
637       common situation. This change restores the behaviour of treating a
638       helo verification defer as a failure.
639
640 PH/51 If self=fail was set on a router, the bounce message did not include the
641       actual error message.
642
643
644 Exim version 4.52
645 -----------------
646
647 TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
648
649 PH/01 When a transport filter timed out in a pipe delivery, and the pipe
650       command itself ended in error, the underlying message about the transport
651       filter timeout was being overwritten with the pipe command error. Now the
652       underlying error message should be appended to the second error message.
653
654 TK/01 Fix poll() being unavailable on Mac OSX 10.2.
655
656 PH/02 Reduce the amount of output that "make" produces by default. Full output
657       can still be requested.
658
659 PH/03 The warning log line about a condition test deferring for a "warn" verb
660       was being output only once per connection, rather than after each
661       occurrence (because it was using the same function as for successful
662       "warn" verbs). This seems wrong, so I have changed it.
663
664 TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
665       it should not have, which might have caused a crash in the right
666       circumstances, but probably never did.
667
668 PH/04 Installed a modified version of Tony Finch's patch to make submission
669       mode fix the return path as well as the Sender: header line, and to
670       add a /name= option so that you can make the user's friendly name appear
671       in the header line.
672
673 TF/03 Added the control = fakedefer ACL modifier.
674
675 TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
676       Mark Lowes for thorough testing.
677
678 TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
679
680 TK/03 Merged latest SRS patch from Miles Wilton.
681
682 PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
683       with the definition in sysexits.h (which is #included earlier).
684       Fortunately, Exim does not actually use EX_OK. The code used to try to
685       preserve the sysexits.h value, by assumimg that macro definitions were
686       scanned for macro replacements. I have been disabused of this notion,
687       so now the code just undefines EX_OK before #including unistd.h.
688
689 PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
690       in the smtp transport. When a block could not be written in a single
691       write() function, the timeout was being re-applied to each part-write.
692       This seems wrong - if the receiver was accepting one byte at a time it
693       would take for ever. The timeout is now adjusted when this happens. It
694       doesn't have to be particularly precise.
695
696 TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
697       details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
698
699 PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
700       without a domain if the check to <postmaster@domain> fails.
701
702 SC/01 Eximstats: added -xls and the ability to specify output files
703      (patch written by Frank Heydlauf).
704
705 SC/02 Eximstats: use FileHandles for outputing results.
706
707 SC/03 Eximstats: allow any combination of xls, txt, and html output.
708
709 SC/04 Eximstats: fixed display of large numbers with -nvr option
710
711 SC/05 Eximstats: fixed merging of reports with empty tables.
712
713 SC/06 Eximstats: added the -include_original_destination flag
714
715 SC/07 Eximstats: removed tabs and trailing whitespace.
716
717 TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
718
719 TK/06 MBOX spool code: Add real "From " MBOX separator line
720       so the .eml file is really in mbox format (even though
721       most programs do not really care). Patch from Alex Miller.
722
723 TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
724       The latter is generated from $received_to and is only set if the
725       message has one envelope recipient. SA can use these headers,
726       obviously out-of-the-box. Patch from Alex Miller.
727
728 PH/08 The ${def test on a variable was returning false if the variable's
729       value was "0", contrary to what the specification has always said!
730       The result should be true unless the variable is empty.
731
732 PH/09 The syntax error of a character other than { following "${if
733       def:variable_name" (after optional whitespace) was not being diagnosed.
734       An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
735       accidental colon was present, for example, could give incorrect results.
736
737 PH/10 Tidied the code in a number of places where the st_size field of a stat()
738       result is used (not including appendfile, where other changes are about
739       to be made).
740
741 PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
742       This involved changing a lot of size variables from int to off_t. It
743       should work with maildirs and everything.
744
745 TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
746       spamd dying while we are connected to it.
747
748 TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
749       <jgh@wizmail.org>
750
751 PH/12 Applied Alex Kiernan's patch for the API change for the error callback
752       function for BDB 4.3.
753
754 PH/13 Changed auto_thaw such that it does not apply to bounce messages.
755
756 PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
757       the sources for PCRE have been re-arranged and more files are now
758       involved.
759
760 PH/15 The code I had for printing potentially long long variables in PH/11
761       above was not the best (it lost precision). The length of off_t variables
762       is now inspected at build time, and an appropriate printing format (%ld
763       or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
764       to be "long long int" or "long int". This is needed for the internal
765       formatting function string_vformat().
766
767 PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
768       the configuration file to be ":syslog", then the script "guesses" where
769       the logs files are, rather than using the compiled in default. In our
770       case the guess is not the same as the compiled default, so the script
771       suddenly stopped working when I started to use syslog. The patch checks
772       to see if log_file_path is "". If so, it attempts to read it from exim
773       with no configuration file to get the compiled in version, before it
774       falls back to the previous guessing code."
775
776 TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
777       implementing BATV in an Exim configuration. See NewStuff for the gory
778       details.
779
780 PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
781       Makefile that are specific to HP-UX.
782
783 PH/18 If the "use_postmaster" option was set for a recipient callout together
784       with the "random" option, the postmaster address was used as the MAIL
785       FROM address for the random test, but not for the subsequent recipient
786       test. It is now used for both.
787
788 PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
789       patch removes a few documentation additions to RFC 3028, because the
790       latest draft now contains them. It adds the new en;ascii-case comparator
791       and a new error check for 8bit text in MIME parts. Comparator and
792       require names are now matched exactly. I enabled the subaddress
793       extension, but it is not well tested yet (read: it works for me)."
794
795 PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
796       rework some of the code of TK/09 above to avoid the hardwired use of
797       "%lld" and "long long". Replaced the call to snprintf() with a call to
798       string_vformat().
799
800 PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
801       records point to non-existent hosts", "retry timeout exceeded", and
802       "retry time not reached for any host after a long failure period".
803
804 PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
805       experimental DomainKeys support:
806
807       (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
808       (2) On an error such as an illegally used "control", the wrong name for
809           the control was given.
810
811       These problems did NOT occur unless DomainKeys support was compiled.
812
813 PH/23 Added daemon_startup_retries and daemon_startup_sleep.
814
815 PH/24 Added ${if match_ip condition.
816
817 PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
818       databases so that it will be absolutely obvious if a crash occurs in the
819       DB library. This is a regular occurrence (often caused by mis-matched
820       db.h files).
821
822 PH/26 Insert a lot of missing (void) casts for functions such as chown(),
823       chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
824       picked up on a user's system that detects such things. There doesn't seem
825       to be a gcc warning option for this - only an attribute that has to be
826       put on the function's prototype. It seems that in Fedora Core 4 they have
827       set this on a number of new functions. No doubt there will be more in due
828       course.
829
830 PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
831       specify a transport. However, if an address that was verified by such a
832       router was the subject of a callout, Exim crashed because it tried to
833       read the rcpt_include_affixes from the non-existent transport. Now it
834       just assumes that the setting of that option is false. This bug was
835       introduced by 4.51/PH/31.
836
837 PH/28 Changed -d+all to exclude +memory, because that information is very
838       rarely of interest, but it makes the output a lot bigger. People tend to
839       do -d+all out of habit.
840
841 PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
842       code in os-type was giving problems when libc.so lives in lib64, like on
843       x86_64 Fedora Core.
844
845 PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
846       aren't the modern standard, and it seems that some systems' include files
847       don't always have them. Exim was already checking for some of the newer
848       ones like T_AAAA, and defining it itself. I've added checks for all the
849       record types that Exim uses.
850
851 PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
852       not automatically generating a new one, as it is supposed to. This
853       prevented TLS from working. If the file did exist, but contained invalid
854       data, a new version was generated, as expected. It was only the case of a
855       non-existent file that was broken.
856
857 TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
858       with a change in libdomainkeys > 0.64.
859
860 TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
861       from DNS. If the selector record carries the flag, it now has
862       precedence over the domain-wide flag.
863
864 TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
865
866 PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
867       the use of a port name that isn't defined in /etc/services) occurred, the
868       message was deferred as in a normal delivery, and thus remained on the
869       spool, instead of being failed because of the mua_wrapper setting. This
870       is now fixed, and I tidied up some of the mua_wrapper messages at the
871       same time.
872
873 SC/08 Eximstats: whilst parsing the mainlog(s), store information about
874       the messages in a hash of arrays rather than using individual hashes.
875       This is a bit cleaner and results in dramatic memory savings, albeit
876       at a slight CPU cost.
877
878 SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
879       as requested by Marc Sherman.
880
881 SC/10 Eximstats: added histograms for user specified patterns as requested
882       by Marc Sherman.
883
884 SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
885
886 PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
887       fopen() in the content-scanning modules that did not already have it.
888
889
890 Exim version 4.51
891 -----------------
892
893 TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
894       doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
895
896 TK/02 Fix ACL "control" statement not being available in MIME ACL.
897
898 TK/03 Fix ACL "regex" condition not being available in MIME ACL.
899
900 PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
901       to test Sieve filters that use "vacation".
902
903 PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
904       that changes the way the GnuTLS parameters are stored in the cache file.
905       The new format can be generated externally. For backward compatibility,
906       if the data in the cache doesn't make sense, Exim assumes it has read an
907       old-format file, and it generates new data and writes a new file. This
908       means that you can't go back to an older release without removing the
909       file.
910
911 PH/03 A redirect router that has both "unseen" and "one_time" set does not
912       work if there are any delivery delays because "one_time" forces the
913       parent to be marked "delivered", so its unseen clone is never tried
914       again. For this reason, Exim now forbids the simultaneous setting of
915       these two options.
916
917 PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
918       redirected to themselves ("homonym" addresses). Read the long ChangeLog
919       entry if you want to know the details. The fix, however, neglected to
920       consider the case when local delivery batching is involved. The test for
921       "previously delivered" was not happening when checking to see if an
922       address could be batched with a previous (undelivered) one; under
923       certain circumstances this could lead to multiple deliveries to the same
924       address.
925
926 PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
927       in its include files, and this causes problems building Exim.
928
929 PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
930       header_syntax) but Exim was just ignoring anything given after a slash.
931       In particular, this caused confusion with an attempt to use "verify =
932       reverse_host_lookup/defer_ok". An error is now given when options are
933       supplied for verify items that do not have them. (Maybe reverse_host_
934       lookup should have a defer_ok option, but that's a different point.)
935
936 PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
937       defined by RFC 821) to 2048, because there were problems with some AUTH
938       commands, and RFC 1869 says the size should be increased for extended
939       SMTP commands that take arguments.
940
941 PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
942       Finch).
943
944 PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
945       "unknown" error; now it says that the functionality isn't in the binary.
946
947 PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
948       an address' error message when a string expansion fails (syntax or
949       whatever). Otherwise the password may appear in the log. Following change
950       PH/42 below, there is no longer a chance of it appearing in a bounce
951       message.
952
953 PH/11 Installed exipick version 20050225.0 from John Jetmore.
954
955 PH/12 If the last host in a fallback_hosts list was multihomed, only the first
956       of its addresses was ever tried. (Bugzilla bug #2.)
957
958 PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
959       the result incorrectly in the debug output. (It correctly added a newline
960       to what was transported.)
961
962 TF/01 Added $received_time.
963
964 PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
965       commented out examples of how to interface to a virus scanner and to
966       SpamAssassin. Also added commented examples of av_scanner and
967       spamd_address settings.
968
969 PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
970       and controls are allowed in which ACLs. There were a couple of minor
971       errors. Some of the entries in the conditions table (which is a table of
972       where they are NOT allowed) were getting very unwieldy; rewrote them as a
973       negation of where the condition IS allowed.
974
975 PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
976
977 PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
978       header file does not have a version number, so I've had to invent a new
979       value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
980       API. The code is untested by me (my Linux distribution still has 0.3.2 of
981       radiusclient), but it was contributed by a Radius user.
982
983 PH/18 Installed Lars Mainka's patch for the support of CRL collections in
984       files or directories, for OpenSSL.
985
986 PH/19 When an Exim process that is running as root has to create an Exim log
987       file, it does so in a subprocess that runs as exim:exim so as to get the
988       ownership right at creation (otherwise, other Exim processes might see
989       the file with the wrong ownership). There was no test for failure of this
990       fork() call, which would lead to the process getting stuck as it waited
991       for a non-existent subprocess. Forks do occasionally fail when resources
992       run out. I reviewed all the other calls to fork(); they all seem to check
993       for failure.
994
995 PH/20 When checking for unexpected SMTP input at connect time (before writing
996       the banner), Exim was not dealing correctly with a non-positive return
997       from the read() function. If the client had disconnected by this time,
998       the result was a log entry for a synchronization error with an empty
999       string after "input=" when read() returned zero. If read() returned -1
1000       (an event I could not check), uninitialized data bytes were printed.
1001       There were reports of junk text (parts of files, etc) appearing after
1002       "input=".
1003
1004 PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
1005
1006 PH/22 Added support for macro redefinition, and (re)definition in between
1007       driver and ACL definitions.
1008
1009 PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
1010       forgetting to use the resulting value; it was using the unexpanded value.
1011
1012 PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
1013       hadn't been configured. The fix is from Juergen Kreileder, who
1014       understands it better than I do:
1015
1016       "Here's what I see happening with three configured cyrus_sasl
1017       authenticators configured (plain, login, cram-md5):
1018
1019       On startup auth_cyrus_sasl_init() gets called for each of these.
1020       This means three calls to sasl_listmech() without a specified mech_list.
1021       => SASL tests which mechs of all available mechs actually work
1022       => three warnings about OTP not working
1023       => the returned list contains: plain, login, cram-md5, digest-md5, ...
1024
1025       With the patch, sasl_listmech() also gets called three times.  But now
1026       SASL's mech_list option is set to the server_mech specified in the the
1027       authenticator.  Or in other words, the answer from sasl_listmech()
1028       gets limited to just the mech you're testing for (which is different
1029       for each call.)
1030       => the return list contains just 'plain' or 'login', 'cram-md5' or
1031       nothing depending on the value of ob->server_mech.
1032
1033       I've just tested the patch: Authentication still works fine,
1034       unavailable mechs specified in the exim configuration are still
1035       caught, and the auth.log warnings about OTP are gone."
1036
1037 PH/25 When debugging is enabled, the contents of the command line are added
1038       to the debugging output, even when log_selector=+arguments is not
1039       specified.
1040
1041 PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
1042       answer is "GNU", and only if the return is "GNU/something" is the answer
1043       "Linux".
1044
1045 PH/27 $acl_verify_message is now set immediately after the failure of a
1046       verification in an ACL, and so is available in subsequent modifiers. In
1047       particular, the message can be preserved by coding like this:
1048
1049          warn  !verify = sender
1050                set acl_m0 = $acl_verify_message
1051
1052       Previously, $acl_verify_message was set only while expanding "message"
1053       and "log_message" when a very denied access.
1054
1055 PH/28 Modified OS/os.c-Linux with
1056
1057         -#ifndef OS_LOAD_AVERAGE
1058         +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
1059
1060       to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
1061       nomenclature these days.)
1062
1063 PH/29 Installed patch from the Sieve maintainer that adds the options
1064       sieve_useraddress and sieve_subaddress to the redirect router.
1065
1066 PH/30 In these circumstances:
1067         . Two addresses routed to the same list of hosts;
1068         . First host does not offer TLS;
1069         . First host accepts first address;
1070         . First host gives temporary error to second address;
1071         . Second host offers TLS and a TLS session is established;
1072         . Second host accepts second address.
1073       Exim incorrectly logged both deliveries with the TLS parameters (cipher
1074       and peerdn, if requested) that were in fact used only for the second
1075       address.
1076
1077 PH/31 When doing a callout as part of verifying an address, Exim was not paying
1078       attention to any local part prefix or suffix that was matched by the
1079       router that accepted the address. It now behaves in the same way as it
1080       does for delivery: the affixes are removed from the local part unless
1081       rcpt_include_affixes is set on the transport.
1082
1083 PH/32 Add the sender address, as F=<...>, to the log line when logging a
1084       timeout during the DATA phase of an incoming message.
1085
1086 PH/33 Sieve envelope tests were broken for match types other than :is. I have
1087       applied a patch sanctioned by the Sieve maintainer.
1088
1089 PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
1090       the uid or gid is negative. A case of a negative gid caused this to be
1091       noticed. The fix allows for either to be negative.
1092
1093 PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
1094       clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
1095       overlooked.
1096
1097 PH/36 The change PH/12 above was broken. Fixed it.
1098
1099 PH/37 Exim used to check for duplicate addresses in the middle of routing, on
1100       the grounds that routing the same address twice would always produce the
1101       same answer. This might have been true once, but it is certainly no
1102       longer true now. Routing a child address may depend on the previous
1103       routing that produced that child. Some complicated redirection strategies
1104       went wrong when messages had multiple recipients, and made Exim's
1105       behaviour dependent on the order in which the addresses were given.
1106
1107       I have moved the duplicate checking until after the routing is complete.
1108       Exim scans the addresses that are assigned to local and remote
1109       transports, and removes any duplicates. This means that more work will be
1110       done, as duplicates will always all be routed, but duplicates are
1111       presumably rare, so I don't expect this is of any significance.
1112
1113       For deliveries to pipes, files, and autoreplies, the duplicate checking
1114       still happens during the routing process, since they are not going to be
1115       routed further.
1116
1117 PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
1118       It corrects a timeout issue with spamd. This is Ian's comment: "The
1119       background is that sometimes spamd either never reads data from a
1120       connection it has accepted, or it never writes response data. The exiscan
1121       spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
1122       blindly assumes that writes won't block so it may never time out."
1123
1124 PH/39 Allow G after quota size as well as K and M.
1125
1126 PH/40 The value set for $authenticated_id in an authenticator may not contain
1127       binary zeroes or newlines because the value is written to log lines and
1128       to spool files. There was no check on this. Now the value is run through
1129       the string_printing() function so that such characters are converted to
1130       printable escape sequences.
1131
1132 PH/41 $message_linecount is a new variable that contains the total number of
1133       lines in the message. Compare $body_linecount, which is the count for the
1134       body only.
1135
1136 PH/42 Exim no longer gives details of delivery errors for specific addresses in
1137       bounce and delay warning messages, except in certain special cases, which
1138       are as follows:
1139
1140       (a) An SMTP error message from a remote host;
1141       (b) A message specified in a :fail: redirection;
1142       (c) A message specified in a "fail" command in a system filter;
1143       (d) A message specified in a FAIL return from the queryprogram router;
1144       (e) A message specified by the cannot_route_message router option.
1145
1146       In these cases only, Exim does include the error details in bounce and
1147       warning messages. There are also a few cases where bland messages such
1148       as "unrouteable address" or "local delivery error" are given.
1149
1150 PH/43 $value is now also set for the "else" part of a ${run expansion.
1151
1152 PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
1153       being worked on, but at least Exim now implements the latest version to
1154       play with."
1155
1156 PH/45 In a pipe transport, although a timeout while waiting for the pipe
1157       process to complete was treated as a delivery failure, a timeout while
1158       writing the message to the pipe was logged, but erroneously treated as a
1159       successful delivery. Such timeouts include transport filter timeouts. For
1160       consistency with the overall process timeout, these timeouts are now
1161       treated as errors, giving rise to delivery failures by default. However,
1162       there is now a new Boolean option for the pipe transport called
1163       timeout_defer, which, if set TRUE, converts the failures into defers for
1164       both kinds of timeout. A transport filter timeout is now identified in
1165       the log output.
1166
1167 PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
1168       systems where "make" and "gmake" are different, calling "gmake" at top
1169       level broke things. I've arranged for the value of $(MAKE) to be passed
1170       from the Makefile to this script so that it can call the same version of
1171       "make".
1172
1173
1174 A note about Exim versions 4.44 and 4.50
1175 ----------------------------------------
1176
1177 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
1178 changes of various kinds. As a consequence, a big documentation update was
1179 needed. This delayed the release for rather longer than seemed good, especially
1180 in the light of a couple of (minor) security issues. Therefore, the changes
1181 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
1182 release. So 4.44 and 4.50 are in effect two different branches that both start
1183 from 4.43.
1184
1185 I have left the 4.50 change log unchanged; it contains all the changes since
1186 4.43. The change log for 4.44 is below; many of its items are identical to
1187 those for 4.50. This seems to be the most sensible way to preserve the
1188 historical information.
1189
1190
1191 Exim version 4.50
1192 -----------------
1193
1194  1. Minor wording change to the doc/README.SIEVE file.
1195
1196  2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
1197     computation of the current number of files was incorrect.
1198
1199  3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
1200     bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
1201     place.
1202
1203  4. Give more explanation in the error message when the command for a transport
1204     filter fails to execute.
1205
1206  5. There are several places where Exim runs a non-Exim command in a
1207     subprocess. The SIGUSR1 signal should be disabled for these processes. This
1208     was being done only for the command run by the queryprogram router. It is
1209     now done for all such subprocesses. The other cases are: ${run, transport
1210     filters, and the commands run by the lmtp and pipe transports.
1211
1212  6. Added CONFIGURE_GROUP build-time option.
1213
1214  7. Some older OS have a limit of 256 on the maximum number of file
1215     descriptors. Exim was using setrlimit() to set 1000 as a large value
1216     unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
1217     systems. I've change it so that if it can't get 1000, it tries for 256.
1218
1219  8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
1220     was an oversight, and furthermore, ever since the addition of extra
1221     controls (e.g. 4.43/32), the checks on when to allow different forms of
1222     "control" were broken. There should now be diagnostics for all cases when a
1223     control that does not make sense is encountered.
1224
1225  9. Added the /retain_sender option to "control=submission".
1226
1227 10. $recipients is now available in the predata ACL (oversight).
1228
1229 11. Tidy the search cache before the fork to do a delivery from a message
1230     received from the command line. Otherwise the child will trigger a lookup
1231     failure and thereby defer the delivery if it tries to use (for example) a
1232     cached ldap connection that the parent has called unbind on.
1233
1234 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
1235     of $address_data from the recipient verification was clobbered by the
1236     sender verification.
1237
1238 13. The value of address_data from a sender verification is now available in
1239     $sender_address_data in subsequent conditions in the ACL statement.
1240
1241 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
1242
1243 15. Added a new option "connect=<time>" to callout options, to set a different
1244     connection timeout.
1245
1246 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
1247     was its contents. (It was OK if the option was not defined at all.)
1248
1249 17. A "Completed" log line is now written for messages that are removed from
1250     the spool by the -Mrm option.
1251
1252 18. New variables $sender_verify_failure and $recipient_verify_failure contain
1253     information about exactly what failed.
1254
1255 19. Added -dd to debug only the daemon process.
1256
1257 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
1258     handles timeouts, both on the server side and network timeouts. Renamed the
1259     CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
1260
1261 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
1262     It is now set to "smtps".
1263
1264 22. $host_address is now set to the target address during the checking of
1265     ignore_target_hosts.
1266
1267 23. When checking ignore_target_hosts for an ipliteral router, no host name was
1268     being passed; this would have caused $sender_host_name to have been used if
1269     matching the list had actually called for a host name (not very likely,
1270     since this list is usually IP addresses). A host name is now passed as
1271     "[x.x.x.x]".
1272
1273 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
1274     code that specifies a non-restarting handler (typically sigaction() in
1275     modern systems) in an attempt to fix a rare and obscure crash bug.
1276
1277 25. Narrowed the window for a race in the daemon that could cause it to ignore
1278     SIGCHLD signals. This is not a major problem, because they are used only to
1279     wake it up if nothing else does.
1280
1281 26. A malformed maildirsize file could cause Exim to calculate negative values
1282     for the mailbox size or file count. Odd effects could occur as a result.
1283     The maildirsize information is now recalculated if the size or filecount
1284     end up negative.
1285
1286 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
1287     support for a long time. Removed HAVE_SYS_VFS_H.
1288
1289 28. Installed the latest version of exipick from John Jetmore.
1290
1291 29. In an address list, if the pattern was not a regular expression, an empty
1292     subject address (from a bounce message) matched only if the pattern was an
1293     empty string. Non-empty patterns were not even tested. This was the wrong
1294     because it is perfectly reasonable to use an empty address as part of a
1295     database query. An empty address is now tested by patterns that are
1296     lookups. However, all the other forms of pattern expect the subject to
1297     contain a local part and a domain, and therefore, for them, an empty
1298     address still always fails if the pattern is not itself empty.
1299
1300 30. Exim went into a mad DNS loop when attempting to do a callout where the
1301     host was specified on an smtp transport, and looking it up yielded more
1302     than one IP address.
1303
1304 31. Re-factored the code for checking spool and log partition space into a
1305     function that finds that data and another that does the check. The former
1306     is then used to implement four new variables: $spool_space, $log_space,
1307     $spool_inodes, and $log_inodes.
1308
1309 32. The RFC2047 encoding function was originally intended for short strings
1310     such as real names; it was not keeping to the 75-character limit for
1311     encoded words that the RFC imposes. It now respects the limit, and
1312     generates multiple encoded words if necessary. To be on the safe side, I
1313     have increased the buffer size for the ${rfc2047: expansion operator from
1314     1024 to 2048 bytes.
1315
1316 33. It is now permitted to omit both strings after an "if" condition; if the
1317     condition is true, the result is "true". As before, when the second string
1318     is omitted, a false condition yields an empty string. This makes it less
1319     cumbersome to write custom ACL and router conditions.
1320
1321 34. Failure to deliver a bounce message always caused it to be frozen, even if
1322     there was an errors_to setting on the router. The errors_to setting is now
1323     respected.
1324
1325 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
1326     canonical form (fully expanded) before being placed in
1327     $sender_host_address.
1328
1329 36. The table in the code that translates DNS record types into text (T_A to
1330     "A" for instance) was missing entries for NS and CNAME. It is just possible
1331     that this could have caused confusion if both these types were looked up
1332     for the same domain, because the text type is used as part of Exim's
1333     per-process caching. But the chance of anyone hitting this buglet seems
1334     very small.
1335
1336 37. The dnsdb lookup has been extended in a number of ways.
1337
1338     (1) There is a new type, "zns", which walks up the domain tree until it
1339         finds some nameserver records. It should be used with care.
1340
1341     (2) There is a new type, "mxh", which is like "mx" except that it returns
1342         just the host names, not the priorities.
1343
1344     (3) It is now possible to give a list of domains (or IP addresses) to be
1345         looked up. The behaviour when one of the lookups defers can be
1346         controlled by a keyword.
1347
1348     (4) It is now possible to specify the separator character for use when
1349         multiple records are returned.
1350
1351 38. The dnslists ACL condition has been extended: it is now possible to supply
1352     a list of IP addresses and/or domains to be looked up in a particular DNS
1353     domain.
1354
1355 39. Added log_selector=+queue_time_overall.
1356
1357 40. When running the queue in the test harness, wait just a tad after forking a
1358     delivery process, to get repeatability of debugging output.
1359
1360 41. Include certificate and key file names in error message when GnuTLS fails
1361     to set them up, because the GnuTLS error message doesn't include the name
1362     of the failing file when there is a problem reading it.
1363
1364 42. Allow both -bf and -bF in the same test run.
1365
1366 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
1367
1368 44. The "Exiscan patch" is now merged into the mainline Exim source.
1369
1370 45. Sometimes the final signoff response after QUIT could fail to get
1371     transmitted in the non-TLS case. Testing !tls_active instead of tls_active
1372     < 0 before doing a fflush(). This bug looks as though it goes back to the
1373     introduction of TLS in release 3.20, but "sometimes" must have been rare
1374     because the tests only now provoked it.
1375
1376 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
1377     (this can affect the format of dates).
1378
1379 47. exim_tidydb, when checking for the continued existence of a message for
1380     which it has found a message-specific retry record, was not finding
1381     messages that were in split spool directories. Consequently, it was
1382     deleting retry records that should have stayed in existence.
1383
1384 48. Steve fixed some bugs in eximstats.
1385
1386 49. The SPA authentication driver was not abandoning authentication and moving
1387     on to the next authenticator when an expansion was forced to fail,
1388     contradicting the general specification for all authenticators. Instead it
1389     was generating a temporary error. It now behaves as specified.
1390
1391 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
1392     (the order specifies the preference for clients). The order is now AES256,
1393     AES128, 3DES, ARCFOUR128.
1394
1395 51. Small patch to Sieve code - explicitly set From: when generating an
1396     autoreply.
1397
1398 52. Exim crashed if a remote delivery caused a very long error message to be
1399     recorded - for instance if somebody sent an entire SpamAssassin report back
1400     as a large number of 550 error lines. This bug was coincidentally fixed by
1401     increasing the size of one of Exim's internal buffers (big_buffer) that
1402     happened as part of the Exiscan merge. However, to be on the safe side, I
1403     have made the code more robust (and fixed the comments that describe what
1404     is going on).
1405
1406 53. Now that there can be additional text after "Completed" in log lines (if
1407     the queue_time_overall log selector is set), a one-byte patch to exigrep
1408     was needed to allow it to recognize "Completed" as not the last thing in
1409     the line.
1410
1411 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
1412     patch that reportedly fixes this has been added. I am not expert enough to
1413     create a test for it. This is what the patch creator wrote:
1414
1415       "I found a little strange behaviour of ldap code when working with
1416       Windows 2003 AD Domain, where users was placed in more than one
1417       Organization Units. When I tried to give exim partial DN, the exit code
1418       of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
1419       But simultaneously result of request was absolutely normal ldap result,
1420       so I produce this patch..."
1421
1422     Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
1423     REFERENCE, so I have modified the code to exclude the patch when that macro
1424     is not defined.
1425
1426 55. Some experimental protocols are using DNS PTR records for new purposes. The
1427     keys for these records are domain names, not reversed IP addresses. The
1428     dnsdb PTR lookup now tests whether its key is an IP address. If not, it
1429     leaves it alone. Component reversal etc. now happens only for IP addresses.
1430     CAN-2005-0021
1431
1432 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
1433
1434 57. Double the size of the debug message buffer (to 2048) so that more of very
1435     long debug lines gets shown.
1436
1437 58. The exicyclog utility now does better if the number of log files to keep
1438     exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
1439
1440 59. Two changes related to the smtp_active_hostname option:
1441
1442       (1) $smtp_active_hostname is now available as a variable.
1443       (2) The default for smtp_banner uses $smtp_active_hostname instead
1444           of $primary_hostname.
1445
1446 60. The host_aton() function is supposed to be passed a string that is known
1447     to be a valid IP address. However, in the case of IPv6 addresses, it was
1448     not checking this. This is a hostage to fortune. Exim now panics and dies
1449     if the condition is not met. A case was found where this could be provoked
1450     from a dnsdb PTR lookup with an IPv6 address that had more than 8
1451     components; fortuitously, this particular loophole had already been fixed
1452     by change 4.50/55 above.
1453
1454     If there are any other similar loopholes, the new check in host_aton()
1455     itself should stop them being exploited. The report I received stated that
1456     data on the command line could provoke the exploit when Exim was running as
1457     exim, but did not say which command line option was involved. All I could
1458     find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
1459     running as the user.
1460     CAN-2005-0021
1461
1462 61. There was a buffer overflow vulnerability in the SPA authentication code
1463     (which came originally from the Samba project). I have added a test to the
1464     spa_base64_to_bits() function which I hope fixes it.
1465     CAN-2005-0022
1466
1467 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
1468     os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
1469
1470 63. The daemon start-up calls getloadavg() while still root for those OS that
1471     need the first call to be done as root, but it missed one case: when
1472     deliver_queue_load_max is set with deliver_drop_privilege. This is
1473     necessary for the benefit of the queue runner, because there is no re-exec
1474     when deliver_drop_privilege is set.
1475
1476 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
1477     This has been fixed.
1478
1479 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
1480     was in use, was not putting the data itself into the right store pool;
1481     consequently, it could be overwritten for a subsequent message in the same
1482     SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
1483     the caching.)
1484
1485 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
1486
1487 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
1488     address", "IPv4 address", and "IPv6 address", respectively. Some calls of
1489     the function were treating the return as a boolean value, which happened to
1490     work because 0=false and not-0=true, but is not correct code.
1491
1492 68. The host_aton() function was not handling scoped IPv6 addresses (those
1493     with, for example, "%eth0" on the end) correctly.
1494
1495 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
1496     negated items (that is, ~something) in unsigned ints. Some compilers
1497     apparently mutter when there is no cast.
1498
1499 70. If an address verification called from an ACL failed, and did not produce a
1500     user-specific message (i.e. there was only a "system" message), nothing was
1501     put in $acl_verify_message. In this situation, it now puts the system
1502     message there.
1503
1504 71. Change 4.23/11 added synchronization checking at the start of an SMTP
1505     session; change 4.31/43 added the unwanted input to the log line - except
1506     that it did not do this in the start of session case. It now does.
1507
1508 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
1509     This is wrong and can cause the other end to generate a synchronization
1510     error if it is another Exim or anything else that does the synchronization
1511     check. A QUIT command is no longer sent after a timeout.
1512
1513 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
1514     during host lookups.
1515
1516 74. The defer_ok option of callout verification was not working if it was used
1517     when verifying addresses in header lines, that is, for this case:
1518
1519       verify = header_sender/callout=defer_ok
1520
1521 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
1522     those file descriptors could be used for SMTP connections. If anything
1523     wrote to stderr (the example that came up was "warn" in embedded Perl), it
1524     could be sent to the SMTP client, causing chaos. The daemon now opens
1525     stdin, stdout, and stderr to /dev/null when it puts itself into the
1526     background.
1527
1528 76. Arrange for output from Perl's "warn" command to be written to Exim's main
1529     log by default. The user can override this with suitable Perl magic.
1530
1531 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
1532     the log message when discard triggers, was not working for the DATA ACL or
1533     for the non-SMTP ACL.
1534
1535 78. Error message wording change in sieve.c.
1536
1537 79. If smtp_accept_max_per_host was set, the number of connections could be
1538     restricted to fewer than expected, because the daemon was trying to set up
1539     a new connection before checking whether the processes handling previous
1540     connections had finished. The check for completed processes is now done
1541     earlier. On busy systems, this bug wouldn't be noticed because something
1542     else would have woken the daemon, and it would have reaped the completed
1543     process earlier.
1544
1545 80. If a message was submitted locally by a user whose login name contained one
1546     or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
1547     It caused a spool format error. I have fixed the spool reading code. A
1548     related problem was that the "from" clause in the Received: line became
1549     illegal because of the space(s). It is now covered by ${quote_local_part.
1550
1551 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
1552     tables).
1553
1554 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
1555
1556 83. Patch from Sieve maintainer to fix unterminated string problem in
1557     "vacation" handling.
1558
1559 84. Some minor changes to the Linux configuration files to help with other
1560     OS variants using glibc.
1561
1562 85. One more patch for Sieve to update vacation handling to latest spec.
1563
1564
1565 ----------------------------------------------------
1566 See the note above about the 4.44 and 4.50 releases.
1567 ----------------------------------------------------
1568
1569
1570 Exim version 4.44
1571 -----------------
1572
1573  1. Change 4.43/35 introduced a bug that caused file counts to be
1574     incorrectly computed when quota_filecount was set in an appendfile
1575     transport
1576
1577  2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
1578     bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
1579     place.
1580
1581  3. Give more explanation in the error message when the command for a transport
1582     filter fails to execute.
1583
1584  4. There are several places where Exim runs a non-Exim command in a
1585     subprocess. The SIGUSR1 signal should be disabled for these processes. This
1586     was being done only for the command run by the queryprogram router. It is
1587     now done for all such subprocesses. The other cases are: ${run, transport
1588     filters, and the commands run by the lmtp and pipe transports.
1589
1590  5. Some older OS have a limit of 256 on the maximum number of file
1591     descriptors. Exim was using setrlimit() to set 1000 as a large value
1592     unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
1593     systems. I've change it so that if it can't get 1000, it tries for 256.
1594
1595  6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
1596     was an oversight, and furthermore, ever since the addition of extra
1597     controls (e.g. 4.43/32), the checks on when to allow different forms of
1598     "control" were broken. There should now be diagnostics for all cases when a
1599     control that does not make sense is encountered.
1600
1601  7. $recipients is now available in the predata ACL (oversight).
1602
1603  8. Tidy the search cache before the fork to do a delivery from a message
1604     received from the command line. Otherwise the child will trigger a lookup
1605     failure and thereby defer the delivery if it tries to use (for example) a
1606     cached ldap connection that the parent has called unbind on.
1607
1608  9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
1609     of $address_data from the recipient verification was clobbered by the
1610     sender verification.
1611
1612 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
1613     was its contents. (It was OK if the option was not defined at all.)
1614
1615 11. A "Completed" log line is now written for messages that are removed from
1616     the spool by the -Mrm option.
1617
1618 12. $host_address is now set to the target address during the checking of
1619     ignore_target_hosts.
1620
1621 13. When checking ignore_target_hosts for an ipliteral router, no host name was
1622     being passed; this would have caused $sender_host_name to have been used if
1623     matching the list had actually called for a host name (not very likely,
1624     since this list is usually IP addresses). A host name is now passed as
1625     "[x.x.x.x]".
1626
1627 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
1628     code that specifies a non-restarting handler (typically sigaction() in
1629     modern systems) in an attempt to fix a rare and obscure crash bug.
1630
1631 15. Narrowed the window for a race in the daemon that could cause it to ignore
1632     SIGCHLD signals. This is not a major problem, because they are used only to
1633     wake it up if nothing else does.
1634
1635 16. A malformed maildirsize file could cause Exim to calculate negative values
1636     for the mailbox size or file count. Odd effects could occur as a result.
1637     The maildirsize information is now recalculated if the size or filecount
1638     end up negative.
1639
1640 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
1641     support for a long time. Removed HAVE_SYS_VFS_H.
1642
1643 18. Updated exipick to current release from John Jetmore.
1644
1645 19. Allow an empty sender to be matched against a lookup in an address list.
1646     Previously the only cases considered were a regular expression, or an
1647     empty pattern.
1648
1649 20. Exim went into a mad DNS lookup loop when doing a callout where the
1650     host was specified on the transport, if the DNS lookup yielded more than
1651     one IP address.
1652
1653 21. The RFC2047 encoding function was originally intended for short strings
1654     such as real names; it was not keeping to the 75-character limit for
1655     encoded words that the RFC imposes. It now respects the limit, and
1656     generates multiple encoded words if necessary. To be on the safe side, I
1657     have increased the buffer size for the ${rfc2047: expansion operator from
1658     1024 to 2048 bytes.
1659
1660 22. Failure to deliver a bounce message always caused it to be frozen, even if
1661     there was an errors_to setting on the router. The errors_to setting is now
1662     respected.
1663
1664 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
1665     canonical form (fully expanded) before being placed in
1666     $sender_host_address.
1667
1668 24. Updated eximstats to version 1.33
1669
1670 25. Include certificate and key file names in error message when GnuTLS fails
1671     to set them up, because the GnuTLS error message doesn't include the name
1672     of the failing file when there is a problem reading it.
1673
1674 26. Expand error message when OpenSSL has problems setting up cert/key files.
1675     As per change 25.
1676
1677 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
1678     (this can affect the format of dates).
1679
1680 28. exim_tidydb, when checking for the continued existence of a message for
1681     which it has found a message-specific retry record, was not finding
1682     messages that were in split spool directories. Consequently, it was
1683     deleting retry records that should have stayed in existence.
1684
1685 29. eximstats updated to version 1.35
1686     1.34 - allow eximstats to parse syslog lines as well as mainlog lines
1687     1.35 - bugfix such that pie charts by volume are generated correctly
1688
1689 30. The SPA authentication driver was not abandoning authentication and moving
1690     on to the next authenticator when an expansion was forced to fail,
1691     contradicting the general specification for all authenticators. Instead it
1692     was generating a temporary error. It now behaves as specified.
1693
1694 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
1695     (the order specifies the preference for clients). The order is now AES256,
1696     AES128, 3DES, ARCFOUR128.
1697
1698 31. Small patch to Sieve code - explicitly set From: when generating an
1699     autoreply.
1700
1701 32. Exim crashed if a remote delivery caused a very long error message to be
1702     recorded - for instance if somebody sent an entire SpamAssassin report back
1703     as a large number of 550 error lines. This bug was coincidentally fixed by
1704     increasing the size of one of Exim's internal buffers (big_buffer) that
1705     happened as part of the Exiscan merge. However, to be on the safe side, I
1706     have made the code more robust (and fixed the comments that describe what
1707     is going on).
1708
1709 33. Some experimental protocols are using DNS PTR records for new purposes. The
1710     keys for these records are domain names, not reversed IP addresses. The
1711     dnsdb PTR lookup now tests whether its key is an IP address. If not, it
1712     leaves it alone. Component reversal etc. now happens only for IP addresses.
1713     CAN-2005-0021
1714
1715 34. The host_aton() function is supposed to be passed a string that is known
1716     to be a valid IP address. However, in the case of IPv6 addresses, it was
1717     not checking this. This is a hostage to fortune. Exim now panics and dies
1718     if the condition is not met. A case was found where this could be provoked
1719     from a dnsdb PTR lookup with an IPv6 address that had more than 8
1720     components; fortuitously, this particular loophole had already been fixed
1721     by change 4.50/55 or 4.44/33 above.
1722
1723     If there are any other similar loopholes, the new check in host_aton()
1724     itself should stop them being exploited. The report I received stated that
1725     data on the command line could provoke the exploit when Exim was running as
1726     exim, but did not say which command line option was involved. All I could
1727     find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
1728     running as the user.
1729     CAN-2005-0021
1730
1731 35. There was a buffer overflow vulnerability in the SPA authentication code
1732     (which came originally from the Samba project). I have added a test to the
1733     spa_base64_to_bits() function which I hope fixes it.
1734     CAN-2005-0022
1735
1736 36. The daemon start-up calls getloadavg() while still root for those OS that
1737     need the first call to be done as root, but it missed one case: when
1738     deliver_queue_load_max is set with deliver_drop_privilege. This is
1739     necessary for the benefit of the queue runner, because there is no re-exec
1740     when deliver_drop_privilege is set.
1741
1742 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
1743     was in use, was not putting the data itself into the right store pool;
1744     consequently, it could be overwritten for a subsequent message in the same
1745     SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
1746     the caching.)
1747
1748 38. Sometimes the final signoff response after QUIT could fail to get
1749     transmitted in the non-TLS case. Testing !tls_active instead of tls_active
1750     < 0 before doing a fflush(). This bug looks as though it goes back to the
1751     introduction of TLS in release 3.20, but "sometimes" must have been rare
1752     because the tests only now provoked it.
1753
1754
1755 Exim version 4.43
1756 -----------------
1757
1758  1. Fixed a longstanding but relatively impotent bug: a long time ago, before
1759     PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
1760     Now it returns an integer. A number of calls were still expecting a T/F
1761     return. Fortuitously, in all cases, the tests worked in OK situations,
1762     which is the norm. However, things would have gone wrong on any write
1763     failures on the smtp file descriptor. This function is used when sending
1764     messages over SMTP and also when doing verify callouts.
1765
1766  2. When Exim is called to do synchronous delivery of a locally submitted
1767     message (the -odf or -odi options), it no longer closes stderr before doing
1768     the delivery.
1769
1770  3. Implemented the mua_wrapper option.
1771
1772  4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
1773
1774  5. Implemented the functions header_remove(), header_testname(),
1775     header_add_at_position(), and receive_remove_recipient(), and exported them
1776     to local_scan().
1777
1778  6. If an ACL "warn" statement specified the addition of headers, Exim already
1779     inserted X-ACL-Warn: at the start if there was no header name. However, it
1780     was not making this test for the second and subsequent header lines if
1781     there were newlines in the string. This meant that an invalid header could
1782     be inserted if Exim was badly configured.
1783
1784  7. Allow an ACL "warn" statement to add header lines at the start or after all
1785     the Received: headers, as well as at the end.
1786
1787  8. Added the rcpt_4xx retry error code.
1788
1789  9. Added postmaster_mailfrom=xxx to callout verification option.
1790
1791 10. Added mailfrom=xxxx to the callout verification option, for verify=
1792     header_sender only.
1793
1794 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
1795     (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
1796
1797 12. Inserted some casts to stop certain compilers warning when using pointer
1798     differences as field lengths or precisions in printf-type calls (mostly
1799     affecting debugging statements).
1800
1801 13. Added optional readline() support for -be (dynamically loaded).
1802
1803 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
1804     same clock tick as a message's arrival, so that its received time was the
1805     same as the "first fail" time on the retry record, and that message
1806     remained on the queue past the ultimate address timeout, every queue runner
1807     would try a delivery (because it was past the ultimate address timeout) but
1808     after another failure, the ultimate address timeout, which should have then
1809     bounced the address, did not kick in. This was a "< instead of <=" error;
1810     in most cases the first failure would have been in the next clock tick
1811     after the received time, and all would be well.
1812
1813 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
1814     being recognized when the domain list was tested by the match_domain
1815     condition in an expansion string.
1816
1817 16. Added the ${str2b64: operator.
1818
1819 17. Exim was always calling setrlimit() to set a large limit for the number of
1820     processes, without checking whether the existing limit was already
1821     adequate. (It did check for the limit on file descriptors.) Furthermore,
1822     errors from getrlimit() and setrlimit() were being ignored. Now they are
1823     logged to the main and panic logs, but Exim does carry on, to try to do its
1824     job under whatever limits there are.
1825
1826 18. Imported PCRE 5.0.
1827
1828 19. Trivial typo in log message " temporarily refused connection" (the leading
1829     space).
1830
1831 20. If the log selector return_path_on_delivery was set and an address was
1832     redirected to /dev/null, the delivery process crashed because it assumed
1833     that a return path would always be set for a "successful" delivery. In this
1834     case, the whole delivery is bypassed as an optimization, and therefore no
1835     return path is set.
1836
1837 21. Internal re-arrangement: the function for sending a challenge and reading
1838     a response while authentication was assuming a zero-terminated challenge
1839     string. It's now changed to take a pointer and a length, to allow for
1840     binary data in such strings.
1841
1842 22. Added the cyrus_sasl authenticator (code supplied by MBM).
1843
1844 23. Exim was not respecting finduser_retries when seeking the login of the
1845     uid under which it was called; it was always trying 10 times. (The default
1846     setting of finduser_retries is zero.) Also, it was sleeping after the final
1847     failure, which is pointless.
1848
1849 24. Implemented tls_on_connect_ports.
1850
1851 25. Implemented acl_smtp_predata.
1852
1853 26. If the domain in control=submission is set empty, Exim assumes that the
1854     authenticated id is a complete email address when it generates From: or
1855     Sender: header lines.
1856
1857 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
1858     definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
1859     chown and chgrp in /bin and hostname in /usr/bin.
1860
1861 28. Exim was keeping the "process log" file open after each use, just as it
1862     does for the main log. This opens the possibility of it remaining open for
1863     long periods when the USR1 signal hits a daemon. Occasional processlog
1864     errors were reported, that could have been caused by this. Anyway, it seems
1865     much more sensible not to leave this file open at all, so that is what now
1866     happens.
1867
1868 29. The long-running daemon process does not normally write to the log once it
1869     has entered its main loop, and it closes the log before doing so. This is
1870     so that log files can straightforwardly be renamed and moved. However,
1871     there are a couple of unusual error situations where the daemon does write
1872     log entries, and I had neglected to close the log afterwards.
1873
1874 30. The text of an SMTP error response that was received during a remote
1875     delivery was being truncated at 512 bytes. This is too short for some of
1876     the long messages that one sometimes sees. I've increased the limit to
1877     1024.
1878
1879 31. It is now possible to make retry rules that apply only when a message has a
1880     specific sender, in particular, an empty sender.
1881
1882 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
1883     it possible to be selective about when SMTP synchronization is enforced.
1884
1885 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
1886
1887 32. Implemented hosts_connection_nolog.
1888
1889 33. Added an ACL for QUIT.
1890
1891 34. Setting "delay_warning=" to disable warnings was not working; it gave a
1892     syntax error.
1893
1894 35. Added mailbox_size and mailbox_filecount to appendfile.
1895
1896 36. Added control = no_multiline_responses to ACLs.
1897
1898 37. There was a bug in the logic of the code that waits for the clock to tick
1899     in the case where the clock went backwards by a substantial amount such
1900     that the microsecond fraction of "now" was more than the microsecond
1901     fraction of "then" (but the whole seconds number was less).
1902
1903 38. Added support for the libradius Radius client library this is found on
1904     FreeBSD (previously only the radiusclient library was supported).
1905
1906
1907 Exim version 4.42
1908 -----------------
1909
1910  1. When certain lookups returned multiple values in the form name=value, the
1911     quoting of the values was not always being done properly. Specifically:
1912     (a) If the value started with a double quote, but contained no whitespace,
1913         it was not quoted.
1914     (b) If the value contained whitespace other than a space character (i.e.
1915         tabs or newlines or carriage returns) it was not quoted.
1916     This fix has been applied to the mysql and pgsql lookups by writing a
1917     separate quoting function and calling it from the lookup code. The fix
1918     should probably also be applied to nisplus, ibase and oracle lookups, but
1919     since I cannot test any of those, I have not disturbed their existing code.
1920
1921  2. A hit in the callout cache for a specific address caused a log line with no
1922     reason for rejecting RCPT. Now it says "Previous (cached) callout
1923     verification failure".
1924
1925  3. There was an off-by-one bug in the queryprogram router. An over-long
1926     return line was truncated at 256 instead of 255 characters, thereby
1927     overflowing its buffer with the terminating zero. As well as fixing this, I
1928     have increased the buffer size to 1024 (and made a note to document this).
1929
1930  4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
1931     when Exim is waiting for an SMTP response from a remote server, Exim
1932     restarts its select() call on the socket, thereby resetting its timeout.
1933     This is not a problem when such interrupts are rare. Somebody set up a cron
1934     job to run exiwhat every 2 minutes, which is less than the normal select()
1935     timeout (5 or 10 minutes). This meant that the select() timeout never
1936     kicked in because it was always reset. I have fixed this by comparing the
1937     time when an interrupt arrives with the time at the start of the first call
1938     to select(). If more time than the timeout has elapsed, the interrupt is
1939     treated as a timeout.
1940
1941  5. Some internal re-factoring in preparation for the addition of Sieve
1942     extensions (by MH). In particular, the "personal" test is moved to a
1943     separate function, and given an option for scanning Cc: and Bcc: (which is
1944     not set for Exim filters).
1945
1946  6. When Exim created an email address using the login of the caller as the
1947     local part (e.g. when creating a From: or Sender: header line), it was not
1948     quoting the local part when it contained special characters such as @.
1949
1950  7. Installed new OpenBSD configuration files.
1951
1952  8. Reworded some messages for syntax errors in "and" and "or" conditions to
1953     try to make them clearer.
1954
1955  9. Callout options, other than the timeout value, were being ignored when
1956     verifying sender addresses in header lines. For example, when using
1957
1958       verify = header_sender/callout=no_cache
1959
1960     the cache was (incorrectly) being used.
1961
1962 10. Added a missing instance of ${EXE} to the exim_install script; this affects
1963     only the Cygwin environment.
1964
1965 11. When return_path_on_delivery was set as a log selector, if different remote
1966     addresses in the same message used different return paths and parallel
1967     remote delivery occurred, the wrong values would sometimes be logged.
1968     (Whenever a remote delivery process finished, the return path value from
1969     the most recently started remote delivery process was logged.)
1970
1971 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
1972     lines when AUTH and/or TLS are in use. This is the "received protocol"
1973     field. Exim used to use "asmtp" for authenticated SMTP, without any
1974     indication (in the protocol name) for TLS use. Now it follows the RFC and
1975     uses "esmtpa" if the connection is authenticated, "esmtps" if it is
1976     encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
1977     names appear in log lines as well as in Received: header lines.
1978
1979 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
1980     extensions, and comparison tests, and to fix some bugs.
1981
1982 14. Changes to the "personal" filter test:
1983
1984     (1) The test was buggy in that it was just doing the equivalent of
1985     "contains" tests on header lines. For example, if a user's address was
1986     anne@some.where, the "personal" test would incorrectly be true for
1987
1988       To: susanne@some.where
1989
1990     This test is now done by extracting each address from the header in turn,
1991     and checking the entire address. Other tests that are part of "personal"
1992     are now done using regular expressions (for example, to check local parts
1993     of addresses in From: header lines).
1994
1995     (2) The list of non-personal local parts in From: addresses has been
1996     extended to include "listserv", "majordomo", "*-request", and "owner-*",
1997     taken from the Sieve specification recommendations.
1998
1999     (3) If the message contains any header line starting with "List-" it is
2000     treated as non-personal.
2001
2002     (4) The test for "circular" in the Subject: header line has been removed
2003     because it now seems ill-conceived.
2004
2005 15. Minor typos in src/EDITME comments corrected.
2006
2007 16. Installed latest exipick from John Jetmore.
2008
2009 17. If headers_add on a router specified a text string that was too long for
2010     string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
2011     of string_sprintf() is now avoided.
2012
2013 18. $message_body_size was not set (it was always zero) when running the DATA
2014     ACL and the local_scan() function.
2015
2016 19. For the "mail" command in an Exim filter, no default was being set for
2017     the once_repeat time, causing a random time value to be used if "once" was
2018     specified. (If the value happened to be <= 0, no repeat happened.) The
2019     default is now 0s, meaning "never repeat". The "vacation" command was OK
2020     (its default is 7d). It's somewhat surprising nobody ever noticed this bug
2021     (I found it when inspecting the code).
2022
2023 20. There is now an overall timeout for performing a callout verification. It
2024     defaults to 4 times the callout timeout, which applies to individual SMTP
2025     commands during the callout. The overall timeout applies when there is more
2026     than one host that can be tried. The timeout is checked before trying the
2027     next host. This prevents very long delays if there are a large number of
2028     hosts and all are timing out (e.g. when the network connections are timing
2029     out). The value of the overall timeout can be changed by specifying an
2030     additional sub-option for "callout", called "maxwait". For example:
2031
2032       verify = sender/callout=5s,maxwait=20s
2033
2034 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
2035     to the end before writing, but this should make it even safer).
2036
2037 22. Exim was forgetting that it had advertised PIPELINING for the second and
2038     subsequent messages on an SMTP connection. It was also not resetting its
2039     memory on STARTTLS and an internal HELO.
2040
2041 23. When Exim logs an SMTP synchronization error within a session, it now
2042     records whether PIPELINING has been advertised or not.
2043
2044 24. Added 3 instances of "(long int)" casts to time_t variables that were being
2045     formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
2046     rather than long int.
2047
2048 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
2049
2050 26. Added the never_mail option to autoreply.
2051
2052
2053 Exim version 4.41
2054 -----------------
2055
2056  1. A reorganization of the code in order to implement 4.40/8 caused a daemon
2057     crash if the getsockname() call failed; this can happen if a connection is
2058     closed very soon after it is established. The problem was simply in the
2059     order in which certain operations were done, causing Exim to try to write
2060     to the SMTP stream before it had set up the file descriptor. The bug has
2061     been fixed by making things happen in the correct order.
2062
2063
2064 Exim version 4.40
2065 -----------------
2066
2067  1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
2068     before the connection was closed, thus losing the rejection response.
2069
2070  2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
2071     some early Solaris releases, but causes trouble in current releases where
2072     socklen_t is defined.
2073
2074  3. When std{in,out,err} are closed, re-open them to /dev/null so that they
2075     always exist.
2076
2077  4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
2078     configured.
2079
2080  5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
2081     that releasing the top of it at the end releases what was used for sub-
2082     expansions (unless the block got too big). However, discard this block if
2083     the first thing is a variable or header, so that we can use its block when
2084     it is dynamic (useful for very large $message_headers, for example).
2085
2086  6. Lookups now cache *every* query, not just the most recent. A new, separate
2087     store pool is used for this. It can be recovered when all lookup caches are
2088     flushed. Lookups now release memory at the end of their result strings.
2089     This has involved some general refactoring of the lookup sources.
2090
2091  7. Some code has been added to the store_xxx() functions to reduce the amount
2092     of flapping under certain conditions.
2093
2094  8. log_incoming_interface used to affect only the <= reception log lines. Now
2095     it causes the local interface and port to be added to several more SMTP log
2096     lines, for example "SMTP connection from", and rejection lines.
2097
2098  9. The Sieve author supplied some patches for the doc/README.SIEVE file.
2099
2100 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
2101
2102 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
2103     could be overwritten at the end of the current message (or the start of a
2104     new message if it was set in a HELO ACL). The value is now preserved for
2105     the duration of the SMTP connection.
2106
2107 12. If a transport had a headers_rewrite setting, and a matching header line
2108     contained an unqualified address, that address was qualified, even if it
2109     did not match any rewriting rules. The underlying bug was that the values
2110     of the flags that permit the existence of unqualified sender and recipient
2111     addresses in header lines (set by {sender,recipient}_unqualified_hosts for
2112     non-local messages, and by -bnq for local messages) were not being
2113     preserved with the message after it was received.
2114
2115 13. When Exim was logging an SMTP synchronization error, it could sometimes log
2116     "next input=" as part of the text comprising the host identity instead of
2117     the correct text. The code was using the same buffer for two different
2118     strings. However, depending on which order the printing function evaluated
2119     its arguments, the bug did not always show up. Under Linux, for example, my
2120     test suite worked just fine.
2121
2122 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
2123     doesn't work with some older versions of Perl. It has been changed to "my",
2124     which in any case is probably the better facility to use.
2125
2126 15. A really picky compiler found some instances of statements for creating
2127     error messages that either had too many or two few arguments for the format
2128     string.
2129
2130 16. The size of the buffer for calls to the DNS resolver has been increased
2131     from 1024 to 2048. A larger buffer is needed when performing PTR lookups
2132     for addresses that have a lot of PTR records. This alleviates a problem; it
2133     does not fully solve it.
2134
2135 17. A dnsdb lookup for PTR records that receives more data than will fit in the
2136     buffer now truncates the list and logs the incident, which is the same
2137     action as happens when Exim is looking up a host name and its aliases.
2138     Previously in this situation something unpredictable would happen;
2139     sometimes it was "internal error: store_reset failed".
2140
2141 18. If a server dropped the connection unexpectedly when an Exim client was
2142     using GnuTLS and trying to read a response, the client delivery process
2143     crashed while trying to generate an error log message.
2144
2145 19. If a "warn" verb in an ACL added multiple headers to a message in a single
2146     string, for example:
2147
2148       warn message = H1: something\nH2: something
2149
2150     the text was added as a single header line from Exim's point of view
2151     though it ended up OK in the delivered message. However, searching for the
2152     second and subsequent header lines using $h_h2: did not work. This has been
2153     fixed. Similarly, if a system filter added multiple headers in this way,
2154     the routers could not see them.
2155
2156 20. Expanded the error message when iplsearch is called with an invalid key to
2157     suggest using net-iplsearch in a host list.
2158
2159 21. When running tests using -bh, any delays imposed by "delay" modifiers in
2160     ACLs are no longer actually imposed (and a message to that effect is
2161     output).
2162
2163 22. If a "gecos" field in a passwd entry contained escaped characters, in
2164     particular, if it contained a \" sequence, Exim got it wrong when building
2165     a From: or a Sender: header from that name. A second bug also caused
2166     incorrect handling when an unquoted " was present following a character
2167     that needed quoting.
2168
2169 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
2170     was not being matched caselessly.
2171
2172 24. Arranged for all hyphens in the exim.8 source to be escaped with
2173     backslashes.
2174
2175 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
2176     properly. Recipient callout cache records were still being keyed to include
2177     the sender, even when use_sender was set false. This led to far more
2178     callouts that were necessary. The sender is no longer included in the key
2179     when use_sender is false.
2180
2181 26. Added "control = submission" modifier to ACLs.
2182
2183 27. Added the ${base62d: operator to decode base 62 numbers.
2184
2185 28. dnsdb lookups can now access SRV records.
2186
2187 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
2188     the configuration file.
2189
2190 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
2191     (-v) mode. This makes the output for a verbose queue run more intelligible.
2192
2193 31. Added a use_postmaster feature to recipient callouts.
2194
2195 32. Added the $body_zerocount variable, containing the number of binary zero
2196     bytes in the message body.
2197
2198 33. The time of last modification of the "new" subdirectory is now used as the
2199     "mailbox time last read" when there is a quota error for a maildir
2200     delivery.
2201
2202 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
2203
2204 35. Added +ignore_unknown as a special item in host lists.
2205
2206 36. Code for decoding IPv6 addresses in host lists is now included, even if
2207     IPv6 support is not being compiled. This fixes a bug in which an IPv6
2208     address was recognized as an IP address, but was then not correctly decoded
2209     into binary, causing unexpected and incorrect effects when compared with
2210     another IP address.
2211
2212
2213 Exim version 4.34
2214 -----------------
2215
2216  1. Very minor rewording of debugging text in manualroute to say "list of
2217     hosts" instead of "hostlist".
2218
2219  2. If verify=header_syntax was set, and a header line with an unqualified
2220     address (no domain) and a large number of spaces between the end of the
2221     name and the colon was received, the reception process suffered a buffer
2222     overflow, and (when I tested it) crashed. This was caused by some obsolete
2223     code that should have been removed. The fix is to remove it!
2224
2225  3. When running in the test harness, delay a bit after writing a bounce
2226     message to get a bit more predictability in the log output.
2227
2228  4. Added a call to search_tidyup() just before forking a reception process. In
2229     theory, someone could use a lookup in the expansion of smtp_accept_max_
2230     per_host which, without the tidyup, could leave open a database connection.
2231
2232  5. Added the variables $recipient_data and $sender_data which get set from a
2233     lookup success in an ACL "recipients" or "senders" condition, or a router
2234     "senders" option, similar to $domain_data and $local_part_data.
2235
2236  6. Moved the writing of debug_print from before to after the "senders" test
2237     for routers.
2238
2239  7. Change 4.31/66 (moving the time when the Received: is generated) caused
2240     problems for message scanning, either using a data ACL, or using
2241     local_scan() because the Received: header was not generated till after they
2242     were called (in order to set the time as the time of reception completion).
2243     I have revised the way this works. The header is now generated after the
2244     body is received, but before the ACL or local_scan() are called. After they
2245     are run, the timestamp in the header is updated.
2246
2247
2248 Exim version 4.33
2249 -----------------
2250
2251  1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
2252     before starting a queue runner without re-exec. This happened only when
2253     deliver_drop_privilege was set or when the Exim user was set to root. The
2254     effect of the bug was that timeouts during subsequent deliveries caused
2255     crashes instead of being properly handled. The handler is now left at its
2256     default (and expected) setting.
2257
2258  2. The other case in which a daemon avoids a re-exec is to deliver an incoming
2259     message, again when deliver_drop_privilege is set or Exim is run as root.
2260     The bug described in (1) was not present in this case, but the tidying up
2261     of the other signals was missing. I have made the two cases consistent.
2262
2263  3. The ignore_target_hosts setting on a manualroute router was being ignored
2264     for hosts that were looked up using the /MX notation.
2265
2266  4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
2267     in domain lists.
2268
2269  5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
2270     operated on the sender address. After changing the $sender_address to <>
2271     for the sender address verify, Exim was re-instated it as the original
2272     (before rewriting) address, but remembering that it had rewritten it, so it
2273     wasn't rewriting it again. This bug also had the effect of breaking the
2274     sender address verification caching when the sender address was rewritten.
2275
2276  6. The ignore_target_hosts option was being ignored by the ipliteral router.
2277     This has been changed so that if the ip literal address matches
2278     ignore_target_hosts, the router declines.
2279
2280  7. Added expansion conditions match_domain, match_address, and match_local_
2281     part (NOT match_host).
2282
2283  8. The placeholder for the Received: header didn't have a length field set.
2284
2285  9. Added code to Exim itself and to exim_lock to test for a specific race
2286     condition that could lead to file corruption when using MBX delivery. The
2287     issue is with the lockfile that is created in /tmp. If this file is removed
2288     after a process has opened it but before that process has acquired a lock,
2289     there is the potential for a second process to recreate the file and also
2290     acquire a lock. This could lead to two Exim processes writing to the file
2291     at the same time. The added code performs the same test as UW imapd; it
2292     checks after acquiring the lock that its file descriptor still refers to
2293     the same named file.
2294
2295 10. The buffer for building added header lines was of fixed size, 8192 bytes.
2296     It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
2297     when Exim is built.
2298
2299 11. Added the smtp_active_hostname option. If used, this will typically be made
2300     to depend on the incoming interface address. Because $interface_address is
2301     not set up until the daemon has forked a reception process, error responses
2302     that can happen earlier (such as "too many connections") no longer contain
2303     a host name.
2304
2305 12. If an expansion in a condition on a "warn" statement fails because a lookup
2306     defers, the "warn" statement is abandoned, and the next ACL statement is
2307     processed. Previously this caused the whole ACL to be aborted.
2308
2309 13. Added the iplsearch lookup type.
2310
2311 14. Added ident_timeout as a log selector.
2312
2313 15. Added tls_certificate_verified as a log selector.
2314
2315 16. Added a global option tls_require_ciphers (compare the smtp transport
2316     option of the same name). This controls incoming TLS connections.
2317
2318 17. I finally figured out how to make tls_require_ciphers do a similar thing
2319     in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
2320     before starting the TLS session.
2321
2322 18. Tabs are now shown as \t in -bP output.
2323
2324 19. If the log selector return_path_on_delivery was set, Exim crashed when
2325     bouncing a message because it had too many Received: header lines.
2326
2327 20. If two routers both had headers_remove settings, and the first one included
2328     a superfluous trailing colon, the final name in the first list and the
2329     first name in the second list were incorrectly joined into one item (with a
2330     colon in the middle).
2331
2332
2333 Exim version 4.32
2334 -----------------
2335
2336  1. Added -C and -D options to the exinext utility, mainly to make it easier
2337     to include in the automated testing, but these could be helpful when
2338     multiple configurations are in use.
2339
2340  2. The exinext utility was not formatting the output nicely when there was
2341     an alternate port involved in the retry record key, nor when there was a
2342     message id as well (for retries that were specific to a specific message
2343     and a specific host). It was also confused by IPv6 addresses, because of
2344     the additional colons they contain. I have fixed the IPv4 problem, and
2345     patched it up to do a reasonable job for IPv6.
2346
2347  3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
2348     delivery, the log line now contains "pipelined" if PIPELINING was used.
2349
2350  4. An SMTP transport process used to panic and die if the bind() call to set
2351     an explicit outgoing interface failed. This has been changed; it is now
2352     treated in the same way as a connect() failure.
2353
2354  5. A reference to $sender_host_name in the part of a conditional expansion
2355     that was being skipped was still causing a DNS lookup. This no longer
2356     occurs.
2357
2358  6. The def: expansion condition was not recognizing references to header lines
2359     that used bh_ and bheader_.
2360
2361  7. Added the _cache feature to named lists.
2362
2363  8. The code for checking quota_filecount in the appendfile transport was
2364     allowing one more file than it should have been.
2365
2366  9. For compatibility with Sendmail, the command line option
2367
2368       -prval:sval
2369
2370     is equivalent to
2371
2372       -oMr rval -oMs sval
2373
2374     and sets the incoming protocol and host name (for trusted callers). The
2375     host name and its colon can be omitted when only the protocol is to be set.
2376     Note the Exim already has two private options, -pd and -ps, that refer to
2377     embedded Perl. It is therefore impossible to set a protocol value of "d" or
2378     "s", but I don't think that's a major issue.
2379
2380 10. A number of refactoring changes to the code, none of which should affect
2381     Exim's behaviour:
2382
2383     (a) The number of logging options was getting close to filling up the
2384     32-bit word that was used as a bit map. I have split them into two classes:
2385     those that are passed in the argument to log_write(), and those that are
2386     only ever tested independently outside of that function. These are now in
2387     separate 32-bit words, so there is plenty of room for expansion again.
2388     There is no change in the user interface or the logging behaviour.
2389
2390     (b) When building, for example, log lines, the code previously used a
2391     macro that called string_cat() twice, in order to add two strings. This is
2392     not really sufficiently general. Furthermore, there was one instance where
2393     it was actually wrong because one of the argument was used twice, and in
2394     one call a function was used. (As it happened, calling the function twice
2395     did not affect the overall behaviour.) The macro has been replaced by a
2396     function that can join an arbitrary number of extra strings onto a growing
2397     string.
2398
2399     (c) The code for expansion conditions now uses a table and a binary chop
2400     instead of a serial search (which was left over from when there were very
2401     few conditions). Also, it now recognizes conditions like "pam" even when
2402     the relevant support is not compiled in: a suitably worded error message is
2403     given if an attempt is made to use such a condition.
2404
2405 11. Added ${time_interval:xxxxx}.
2406
2407 12. A bug was causing one of the ddress fields not to be passed back correctly
2408     from remote delivery subprocesses. The field in question was not being
2409     subsequently used, so this caused to problems in practice.
2410
2411 13. Added new log selectors queue_time and deliver_time.
2412
2413 14. Might have fixed a bug in maildirsizefile handling that threw up
2414     "unexpected character" debug warnings, and recalculated the data
2415     unnecessarily. In any case, I expanded the warning message to give more
2416     information.
2417
2418 15. Added the message "Restricted characters in address" to the statements in
2419     the default ACL that block characters like @ and % in local parts.
2420
2421 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
2422     Three changes have been made:
2423
2424     (a) There was a serious bug; a negative response to MAIL caused the whole
2425         recipient domain to be cached as invalid, thereby blocking all messages
2426         to all local parts at the same domain, from all senders. This bug has
2427         been fixed. The domain is no longer cached after a negative response to
2428         MAIL if the sender used is not empty.
2429
2430     (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
2431         been restored.
2432
2433     (c) A new callout option, "use_sender" has been added for people who want
2434         the modified behaviour.
2435
2436
2437 Exim version 4.31
2438 -----------------
2439
2440  1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
2441     Larry Rosenman.
2442
2443  2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
2444     indeed breaks things for older releases.
2445
2446  3. Added additional logging to the case where there is a problem reading data
2447     from a filter that is running in a subprocess using a pipe, in order to
2448     try to track down a specific problem.
2449
2450  4. Testing facility fudge: when running in the test harness and attempting
2451     to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
2452     getting "No route to host". Convert this to a timeout.
2453
2454  5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
2455     warning.
2456
2457  6. Some OS don't have socklen_t but use size_t instead. This affects the
2458     fifth argument of getsockopt() amongst other things. This is now
2459     configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
2460     can be set for individual OS. I have set it for SunOS5, OSF1, and
2461     Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
2462     some earlier ones do not.
2463
2464  7. Change 4.30/15 was not doing the test caselessly.
2465
2466  8. The standard form for an IPv6 address literal was being rejected by address
2467     parsing in, for example, MAIL and RCPT commands. An example of this kind of
2468     address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
2469     this, as well as the form without the "IPv6" on the front (but only when
2470     address literals are enabled, of course).
2471
2472  9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
2473
2474 10. Exim crashed if a message with an empty sender address specified by -f
2475     encountered a router with an errors_to setting. This could be provoked only
2476     by a command such as
2477
2478       exim -f "" ...
2479
2480     where an empty string was supplied; "<>" did not hit this bug.
2481
2482 11. Installed PCRE release 4.5.
2483
2484 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
2485     remained set. It is now erased.
2486
2487 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
2488     times from message ids (which are base 36 rather than the normal 62).
2489
2490 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
2491     were being counted as actual protocol errors, and logged if the log
2492     selector +smtp_protocol_error was set. One cannot be perfect in this test,
2493     but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
2494     and DATA following a set of rejected RCPTs do not count as protocol errors.
2495     In other words, Exim assumes they were pipelined, though this may not
2496     actually be the case. Of course, in all cases the client gets an
2497     appropriate error code.
2498
2499 15. If a lookup fails in an ACL condition, a message about the failure may
2500     be available; it is used if testing the ACL cannot continue, because most
2501     such messages specify what the cause of the deferral is. However, some
2502     messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
2503     that caused an old message to be retained and used if a later statement
2504     caused a defer, replacing the real cause of the deferral.
2505
2506 16. If an IP address had so many PTR records that the DNS lookup buffer
2507     was not large enough to hold them, Exim could crash while trying to process
2508     the truncated data. It now detects and logs this case.
2509
2510 17. Further to 4.21/58, another change has been made: if (and only if) the
2511     first line of a message (the first header line) ends with CRLF, a bare LF
2512     in a subsequent header line has a space inserted after it, so as not to
2513     terminate the header.
2514
2515 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
2516     unnecessarily, used atoi() instead of strtol(), and didn't check the
2517     termination when getting file sizes from file names by regex.
2518
2519 19. Completely re-implemented the support for maildirsize files, in the light
2520     of a number of problems with the previous contributed implementation
2521     (4.30/29). In particular:
2522
2523     . If the quota is zero, the maildirsize file is maintained, but no quota is
2524       imposed.
2525
2526     . If the maildir directory does not exist, it is created before any attempt
2527       to write a maildirsize file.
2528
2529     . The quota value in the file is just a cache; if the quota is changed in
2530       the transport, the new value overrides.
2531
2532     . A regular expression is available for excluding directories from the
2533       count.
2534
2535 20. The autoreply transport checks the characters in options that define the
2536     message's headers; it allows continued headers, but it was checking with
2537     isspace() after an embedded newline instead of explicitly looking for a
2538     space or a tab.
2539
2540 21. If all the "regular" hosts to which an address was routed had passed their
2541     expiry times, and had not reached their retry times, the address was
2542     bounced, even if fallback hosts were defined. Now Exim should go on to try
2543     the fallback hosts.
2544
2545 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
2546     equivalent code in the SMTP transport. Some hosts send humungous responses
2547     to HELO/EHLO, more than 1024 it seems.
2548
2549 23. Refactoring: code in filter.c used (void *) for "any old type" but this
2550     gives compiler warnings in some environments. I've now done it "properly",
2551     using a union.
2552
2553 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
2554     (because of problems with the built-in one) was declared to return uschar *
2555     instead of char *, causing compiler failure.
2556
2557 25. Fixed a file descriptor leak when processing alias/forward files.
2558
2559 26. Fixed a minor format string issue in dbfn.c.
2560
2561 27. Typo in exim.c: ("dmbnz" for "dbmnz").
2562
2563 28. If a filter file refered to $h_xxx or $message_headers, and the headers
2564     contained RFC 2047 "words", Exim's memory could, under certain conditions,
2565     become corrupted.
2566
2567 29. When a sender address is verified, it is cached, to save repeating the test
2568     when there is more than one recipient in a message. However, when the
2569     verification involves a callout, it is possible for different callout
2570     options to be set for different recipients. It is too complicated to keep
2571     track of this in the cache, so now Exim always runs a verification when a
2572     callout is required, relying on the callout cache for the optimization.
2573     The overhead is duplication of the address routing, but this should not be
2574     too great.
2575
2576 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
2577     to be verified with callout=postmaster, and the main callout worked but the
2578     postmaster check failed, the verification correctly failed. However, if a
2579     subsequent RCPT command asked for sender verification *without* the
2580     postmaster check, incorrect caching caused this verification also to fail,
2581     incorrectly.
2582
2583 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
2584     it was not caching the DNS options (qualify_single, search_parents) that
2585     were used when the lookup failed. A subsequent lookup with different
2586     options therefore always gave the same answer, though there were cases
2587     where it should not have. (Example: a "domains = !$mx_any" option on a
2588     dnslookup router: the "domains" option is always processed without any
2589     widening, but the router might have qualify_single set.) Now Exim uses the
2590     cached value only when the same options are set.
2591
2592 32. Added John Jetmore's "exipick" utility to the distribution.
2593
2594 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
2595     than a timeout (e.g. a certificate is required, and is not provided), an
2596     Exim server now closes the connection immediately. Previously it waited for
2597     the client to close - but if the client is SSL, it seems that they each
2598     wait for each other, leading to a delay before one of them times out.
2599
2600 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
2601     maintained 0.8.x compatibility because I don't think many are using it, and
2602     it is clearly obsolete.
2603
2604 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
2605     transport.
2606
2607 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
2608     client certificate was expired. A simple patch fixes this, though I don't
2609     understand the full logic of why the verify callback is called multiple
2610     times.
2611
2612 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
2613     Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
2614     which causes problems with some clients (such as the Certicom SSL Plus
2615     library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
2616     disables the coutermeasure allowing Eudora to connect."
2617
2618 38. Exim was not checking that a write() to a log file succeeded. This could
2619     lead to Bad Things if a log got too big, in particular if it hit a file
2620     size limit. Exim now panics and dies if it cannot write to a log file, just
2621     as it does if it cannot open a log file.
2622
2623 39. Modified OS/Makefile-Linux so that it now contains
2624
2625       CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
2626
2627     The two -D definitions ensure that Exim is compiled with large file
2628     support, which makes it possible to handle log files that are bigger than
2629     2^31.
2630
2631 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
2632     instance) a domain was checked against a named list that involved a lookup,
2633     causing $domain_data to be set, then another domain was checked against the
2634     same list, then the first domain was re-checked, the value of $domain_data
2635     after the final check could be wrong. In particular, if the second check
2636     failed, it could be set empty. This bug probably also applied to
2637     $localpart_data.
2638
2639 41. The strip_trailing_dot option was not being applied to the address given
2640     with the -f command-line option.
2641
2642 42. The code for reading a message's header from the spool was incrementing
2643     $received_count, but never initializing it. This meant that the value was
2644     incorrect (doubled) while delivering a message in the same process in which
2645     it was received. In the most common configuration of Exim, this never
2646     happens - a fresh exec is done - but it can happen when
2647     deliver_drop_privilege is set.
2648
2649 43. When Exim logs an SMTP synchronization error - client data sent too soon -
2650     it now includes up to 150 characters of the unexpected data in the log
2651     line.
2652
2653 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
2654     and building data strings. The size of both of these buffers was 10 000
2655     bytes - far larger than anybody would *ever* want, thought I. Needless to
2656     say, somebody hit the limit. I have increased the maximum line length to
2657     20 000 and the maximum data length of concatenated lines to 100 000. I have
2658     also fixed two bugs, because there was no checking on these buffers. Tsk,
2659     tsk. Now exim_dbmbuild gives a message and exits with an error code if a
2660     buffer is too small.
2661
2662 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
2663     lsearch lookups. Now it does.
2664
2665 46. When parsing a route_list item in a manualroute router, a fixed-length
2666     buffer was used for the list of hosts. I made this 1024 bytes long,
2667     thinking that nobody would ever have a list of hosts that long. Wrong.
2668     Somebody had a whole pile of complicated expansion conditions, and the
2669     string was silently truncated, leading to an expansion error. It turns out
2670     that it is easier to change to an unlimited length (owing to other changes
2671     that have happened since this code was originally written) than to build
2672     structure for giving a limitation error. The length of the item that
2673     expands into the list of hosts is now unlimited.
2674
2675 47. The lsearch lookup could not handle data where the length of text line was
2676     more than 4095 characters. Such lines were truncated, leading to shortened
2677     data being returned. It should now handle lines of any length.
2678
2679 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
2680     xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
2681     ACL").
2682
2683 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
2684     replacing strings such as BIN_DIRECTORY in a source file: the replacement
2685     no longer happens in comment lines. A list of replacements is now placed
2686     at the head of all of the source files, except those whose only change is
2687     to replace PERL_COMMAND in the very first #! line.
2688
2689 50. Replaced the slow insertion sort in queue.c, for sorting the list of
2690     messages on the queue, with a bottom-up merge sort, using code contributed
2691     by Michael Haardt. This should make operations like -bp somewhat faster on
2692     large queues. It won't affect queue runners, except when queue_run_in_order
2693     is set.
2694
2695 51. Installed eximstats 1.31 in the distribution.
2696
2697 52. Added support for SRV lookups to the dnslookup router.
2698
2699 53. If an ACL referred to $message_body or $message_body_end, the value was not
2700     reset for any messages that followed in the same SMTP session.
2701
2702 54. The store-handling optimization for building very long strings was not
2703     differentiating between the different store pools. I don't think this
2704     actually made any difference in practice, but I've tidied it.
2705
2706 55. While running the routers to verify a sender address, $sender_address
2707     was still set to the sender address. This is wrong, because when routing to
2708     send a bounce to the sender, it would be empty. Therefore, I have changed
2709     it so that, while verifying a sender address, $sender_address is set to <>.
2710     (There is no change to what happens when verifying a recipient address.)
2711
2712 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
2713     target A or AAAA records (if not already returned) without resetting the
2714     qualify_single or search_parents options of the DNS resolver. These are
2715     inappropriate in this case because the targets of MX and SRV records must
2716     be FQDNs. A broken DNS record could cause trouble if it happened to have a
2717     target that, when qualified, matched something in the local domain. These
2718     two options are now turned off when doing these lookups.
2719
2720 57. It seems that at least some releases of Reiserfs (which does not have the
2721     concept of a fixed number of inodes) returns zero and not -1 for the
2722     number of available inodes. This interacted badly with check_spool_inodes,
2723     which assumed that -1 was the "no such thing" setting. What I have done is
2724     to check that the total number of inodes is greater than zero before doing
2725     the test of how many are available.
2726
2727 58. When a "warn" ACL statement has a log_message modifier, the message is
2728     remembered, and not repeated. This is to avoid a lot of repetition when a
2729     message has many recipients that cause the same warning to be written.
2730     Howewer, Exim was preserving the list of already written lines for an
2731     entire SMTP session, which doesn't seem right. The memory is now reset if a
2732     new message is started.
2733
2734 59. The "rewrite" debugging flag was not showing the result of rewriting in the
2735     debugging output unless log_rewrite was also set.
2736
2737 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
2738     of (int)(handle) when we know that handle contains (void *)(-1).
2739
2740 61. The Exim daemon panic-logs an error return when it closes the incoming
2741     connection. However "connection reset by peer" seems to be common, and
2742     isn't really an error worthy of noting specially, so that particular error
2743     is no long logged.
2744
2745 62. When Exim is trying to find all the local interfaces, it used to panic and
2746     die if the ioctl to get the interface flags failed. However, it seems that
2747     on at least one OS (Solaris 9) it is possible to have an interface that is
2748     included in the list of interfaces, but for which you get a failure error
2749     for this call. This happens when the interface is not "plumbed" into a
2750     protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
2751     failure of the "get flags" call assumes that the interface is down.
2752
2753 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
2754     makes life easier for people who are doing arithmetic on fields extracted
2755     from dates, where you often get leading zeros that should not be
2756     interpreted as octal.
2757
2758 64. Added qualify_domain to the redirect router, to override the global
2759     setting.
2760
2761 65. If a pathologically long header line contained very many addresses (the
2762     report of this problem mentioned 10 000) and each of them was rewritten,
2763     Exim could use up a very large amount of memory. (It kept on making new
2764     copies of the header line as it rewrote, and never released the old ones.)
2765     At the expense of a bit more processing, the header rewriting function has
2766     been changed so that it no longer eats memory in this way.
2767
2768 66. The generation of the Received: header has been moved from the time that a
2769     message starts to be received, to the time that it finishes. The timestamp
2770     in the Received: header should now be very close to that of the <= log
2771     line. There are two side-effects of this change:
2772
2773     (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
2774         logged header lines no longer include the local Received: line, because
2775         it has not yet been created. The same applies to a copy of the message
2776         that is returned to a non-SMTP sender when a message is rejected.
2777
2778     (b) When a filter file is tested using -bf, no additional Received: header
2779         is added to the test message. After some thought, I decided that this
2780         is a bug fix.
2781
2782     This change does not affect the value of $received_for. It is still set
2783     after address rewriting, but before local_scan() is called.
2784
2785 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
2786
2787 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
2788     gave an unhelpful panic error message, and a defer error. I have managed to
2789     change this behaviour so that it now rejects any supplied certificate,
2790     which seems right, as the list of acceptable certificates is empty.
2791
2792 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
2793     gave an unhelpful defer error. I have not managed to make this reject any
2794     supplied certificates, but the error message it gives is "no certificate
2795     supplied", which is not helpful.
2796
2797 70. exigrep's output now also includes lines that are not associated with any
2798     message, but which match the given pattern. Implemented by a patch from
2799     Martin Sluka, which also tidied up the Perl a bit.
2800
2801 71. Recipient callout verification, like sender verification, was using <> in
2802     the MAIL FROM command. This isn't really the right thing, since the actual
2803     sender may affect whether the remote host accepts the recipient or not. I
2804     have changed it to use the actual sender in the callout; this means that
2805     the cache record is now keyed on a recipient/sender pair, not just the
2806     recipient address. There doesn't seem to be a real danger of callout loops,
2807     since a callout by the remote host to check the sender would use <>.
2808     [SEE ABOVE: changed after hitting problems.]
2809
2810 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
2811     temporary errors. However, in the case of such a code being given after
2812     the end of a data transmission (i.e. after ".") Exim was failing to write
2813     a retry record for the message. (Yes, there was some broken host that was
2814     actually sending 8xx at this point.)
2815
2816 73. An unknown lookup type in a host list could cause Exim to panic-die when
2817     the list was checked. (An example that provoked this was putting <; in the
2818     middle of a list instead of at the start.) If this happened during a DATA
2819     ACL check, a -D file could be left lying around. This kind of configuration
2820     error no longer causes Exim to die; instead it causes a defer errror. The
2821     incident is still logged to the main and panic logs.
2822
2823 74. Buglet left over from Exim 3 conversion. The message "too many messages
2824     in one connection" was written to the rejectlog but not the mainlog, except
2825     when address rewriting (yes!) was being logged.
2826
2827 75. Added write_rejectlog option.
2828
2829 76. When a system filter was run not as root (that is, when system_filter_user
2830     was set), the values of the $n variables were not being returned to the
2831     main process; thus, they were not subsequently available in the $sn
2832     variables.
2833
2834 77. Added +return_path_on_delivery log selector.
2835
2836 78. A connection timeout was being treated differently from recipients deferred
2837     when testing hosts_max_try with a message that was older than the host's
2838     retry timeout. (The host should not be counted, thus allowing all hosts to
2839     be tried at least once before bouncing.) This may have been the cause of an
2840     occasionally reported bug whereby a message would remain on the queue
2841     longer than the retry timeout, but would be bounced if a delivery was
2842     forced. I say "may" because I never totally pinned down the problem;
2843     setting up timeout/retry tests is difficult. See also the next item.
2844
2845 79. The ultimate address timeout was not being applied to errors that involved
2846     a combination of host plus message (for example, a timeout on a MAIL
2847     command). When an address resolved to a number of possible hosts, and they
2848     were not all tried for each delivery (e.g. because of hosts_max_try), a
2849     message could remain on the queue longer than the retry timeout.
2850
2851 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
2852     Haardt.
2853
2854 81. Fixed an obscure SMTP outgoing bug which required at least the following
2855     conditions: (a) there was another message waiting for the same server;
2856     (b) the server returned 5xx to all RCPT commands in the first message so
2857     that the message was not completed; (c) the server dropped the connection
2858     or gave a negative response to the RSET that Exim sends to abort the
2859     transaction. The observed case was a dropped connection after DATA that had
2860     been sent in pipelining mode. That is, the server had advertised PIPELINING
2861     but was not implementing it correctly. The effect of the bug was incorrect
2862     behaviour, such as trying another host, and this could lead to a crash.
2863
2864
2865 Exim version 4.30
2866 -----------------
2867
2868  1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
2869     and daemon.c were passed as pointers to ints; they should have been
2870     pointers to socklen_t variables (which are typically unsigned ints).
2871
2872  2. Some signed/unsigned type warnings in the os.c file for Linux have been
2873     fixed.
2874
2875  3. Fixed a really odd bug that affected only the testing scheme; patching a
2876     certain fixed string in the binary changed the value of another string that
2877     happened to be identical to the end of the original first string.
2878
2879  4. When gethostbyname() (or equivalent) is passed an IP address as a "host
2880     name", it returns that address as the IP address. On some operating
2881     systems (e.g. Solaris), it also passes back the IP address string as the
2882     "host name". However, on others (e.g. Linux), it passes back an empty
2883     string. Exim wasn't checking for this, and was changing the host name to an
2884     empty string, assuming it had been canonicized.
2885
2886  5. Although rare, it is permitted to have more than one PTR record for a given
2887     IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
2888     all the names associated with an address, because they do in Solaris.
2889     However, it seems that they do not in Linux for data that comes from the
2890     DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
2891     I found this out when I moved to a new Linux workstation and tried to run
2892     the Exim test suite.
2893
2894     To get round this problem I have changed the code so that it now does its
2895     own call to the DNS to look up PTR records when searching for a host name.
2896     If nothing can be found in the DNS, it tries gethostbyaddr(), so that
2897     addresses that are only in /etc/hosts are still found.
2898
2899     This behaviour is, however, controlled by an option called host_lookup_
2900     order, which defaults to "bydns:byaddr". If people want to use the other
2901     order, or indeed, just use one or the other means of lookup, they can
2902     specify it in this variable.
2903
2904  6. If a PTR record yields an empty name, Exim treats it as non-existent. In
2905     some operating systems, this comes back from gethostbyaddr() as an empty
2906     string, and this is what Exim used to test for. However, it seems that in
2907     other systems, "." is yielded. Exim now tests for this case too.
2908
2909  7. The values of check_spool_space and check_log_space are now held internally
2910     as a number of kilobytes instead of an absolute number of bytes. If a
2911     numbers is specified without 'K' or 'M', it is rounded up to the nearest
2912     kilobyte. This means that much larger values can be stored.
2913
2914  8. Exim monitor: an attempt to get the action menu when not actually pointing
2915     at a message produces an empty menu entitled "No message selected". This
2916     works on Solaris (OpenWindows). However, XFree86 does not like a menu with
2917     no entries in it ("Shell widget menu has zero width and/or height"). So I
2918     have added a single, blank menu entry in this case.
2919
2920  9. Added ${quote_local_part.
2921
2922 10. MIME decoding is now applied to the contents of Subject: header lines when
2923     they are logged.
2924
2925 11. Now that a reference to $sender_host_address automatically causes a reverse
2926     lookup to occur if necessary (4.13/18), there is no need to arrange for a
2927     host lookup before query-style lookups in lists that might use this
2928     variable. This has therefore been abolished, and the "net-" prefix is no
2929     longer necessary for query-style lookups.
2930
2931 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
2932     have been a typo for LFLAGS, so it has been changed.
2933
2934 13. The install script calls Exim with "-C /dev/null" in order to find the
2935     version number. If ALT_CONFIG_PREFIX was set, this caused an error message
2936     to be output. Howeve, since Exim outputs its version number before the
2937     error, it didn't break the script. It just looked ugly. I fixed this by
2938     always allowing "-C /dev/null" if the caller is root.
2939
2940 14. Ignore overlarge ACL variable number when reading spool file - insurance
2941     against a later release with more variables having written the file.
2942
2943 15. The standard form for an IPv6 address literal was being rejected by EHLO.
2944     Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
2945     this, as well as the form without the "IPv6" on the front.
2946
2947 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
2948     OS/Makefile-Darwin file.
2949
2950 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
2951     only to LDAP libraries that do not have LDAP_OPT_DEREF.
2952
2953 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
2954     variable. However, some OS use ints for inodes. I've added cast to long int
2955     to get rid of the compiler warning.
2956
2957 19. I had forgotten to lock out "/../" in configuration file names when
2958     ALT_CONFIG_PREFIX was set.
2959
2960 20. Routers used for verification do not need to specify transports. However,
2961     if such a router generated a host list, and callout was configured, Exim
2962     crashed, because it could not find a port number from the (non-existent)
2963     transport. It now assumes port 25 in this circumstance.
2964
2965 21. Added the -t option to exigrep.
2966
2967 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
2968     wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
2969     NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
2970     them is set, LOOKUP_LSEARCH is forced.
2971
2972 23. "exim -bV" now outputs a list of lookups that are included in the binary.
2973
2974 24. Added sender and host information to the "rejected by local_scan()" log
2975     line; previously there was no indication of these.
2976
2977 25. Added .include_if_exists.
2978
2979 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
2980     Linux. It turns out that not all file systems support this. Apparently some
2981     versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
2982     do it.) To cope with this, the error EINVAL, which means that sync-ing is
2983     not supported on the file descriptor, is now ignored when Exim is trying to
2984     sync a directory. This applies only to Linux.
2985
2986 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
2987
2988 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
2989     /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
2990     this.
2991
2992 29. Added support for maildirsize files from supplied patch (modified a bit).
2993
2994 30. The use of :fail: followed by an empty string could lead Exim to respond to
2995     sender verification failures with (e.g.):
2996
2997       550 Verification failed for <xxx>
2998       550 Sender verify failed
2999
3000     where the first response line was missing the '-' that indicates it is not
3001     the final line of the response.
3002
3003 31. The loop for finding the name of the user that called Exim had a hardwired
3004     limit of 10; it now uses the value of finduser_retries, which is used for
3005     all other user lookups.
3006
3007 32. Added $received_count variable, available in data and not_smtp ACLs, and at
3008     delivery time.
3009
3010 33. Exim was neglecting to zero errno before one call of strtol() when
3011     expanding a string and expecting an integer value. On some systems this
3012     resulted in spurious "integer overflow" errors. Also, it was casting the
3013     result into an int without checking.
3014
3015 34. Testing for a connection timeout using "timeout_connect" in the retry rules
3016     did not work. The code looks as if it has *never* worked, though it appears
3017     to have been documented since at least releast 1.62. I have made it work.
3018
3019 35. The "timeout_DNS" error in retry rules, also documented since at least
3020     1.62, also never worked. As it isn't clear exactly what this means, and
3021     clearly it isn't a major issue, I have abolished the feature by treating it
3022     as "timeout", and writing a warning to the main and panic logs.
3023
3024 36. The display of retry rules for -brt wasn't always showing the error code
3025     correctly.
3026
3027 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
3028     timeout_connect_A, timeout_connect_MX.
3029
3030 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
3031     to the empty sender.
3032
3033 39. The daemon was not analysing the content of -oX till after it had closed
3034     stderr and disconnected from the controlling terminal. This meant that any
3035     syntax errors were only noted on the panic log, and the return code from
3036     the command was 0. By re-arranging the code a little, I've made the
3037     decoding happen first, so such errors now appear on stderr, and the return
3038     code is 1. However, the actual setting up of the sockets still happens in
3039     the disconnected process, so errors there are still only recorded on the
3040     panic log.
3041
3042 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
3043     connections (as happens on some IP stacks) was logged at start up time as
3044     just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
3045     it from "IPv6 and IPv4", which means that two separate sockets are being
3046     used.
3047
3048 41. The debug output for gethostbyname2() or getipnodebyname() failures now
3049     says whether AF_INET or AF_INET6 was passed as an argument.
3050
3051 42. Exiwhat output was messed up when time zones were included in log
3052     timestamps.
3053
3054 43. Exiwhat now gives more information about the daemon's listening ports,
3055     and whether -tls-on-connect was used.
3056
3057 44. The "port" option of the smtp transport is now expanded.
3058
3059 45. A "message" modifier in a "warn" statement in a non-message ACL was being
3060     silently ignored. Now an error message is written to the main and panic
3061     logs.
3062
3063 46. There's a new ACL modifier called "logwrite" which writes to a log file
3064     as soon as it is encountered.
3065
3066 47. Added $local_user_uid and $local_user_gid at routing time.
3067
3068 48. Exim crashed when trying to verify a sender address that was being
3069     rewritten to "<>".
3070
3071 49. Exim was recognizing only a space character after ".include". It now also
3072     recognizes a tab character.
3073
3074 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
3075     extracting the relevant information from the specification. The man page no
3076     longer contains scrambled data for the -d option, and I've added a section
3077     at the front about calling Exim under different names.
3078
3079 51. Added "extra_headers" argument to the "mail" command in filter files.
3080
3081 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
3082     crash.
3083
3084 53. Installed eximstats 1.29.
3085
3086 54. Added transport_filter_timeout as a generic transport option.
3087
3088 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
3089     Cc: header lines. This was required by RFC 822, but it not required by RFC
3090     2822.
3091
3092 56. Exim used to add From:, Date:, and Message-Id: header lines to any
3093     incoming messages that did not have them. Now it does so only if the
3094     message originates locally, that is, if there is no associated remote host
3095     address. When Resent- header lines are present, this applies to the Resent-
3096     lines rather than the non-Resent- lines.
3097
3098 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
3099     limit is controlled by smtp_max_synprot_errors, defaulting to 3.
3100
3101 58. Messages for configuration errors now include the name of the main
3102     configuration file - useful now that there may be more than one file in a
3103     list (.included file names were always shown).
3104
3105 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
3106     for those rare installations that do not start the daemon as root or run it
3107     setuid root. I've cut out the call to initgroups() if the daemon is not
3108     root at that time.
3109
3110 60. The Exim user and group can now be bound into the binary as text strings
3111     that are looked up at the start of Exim's processing.
3112
3113 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
3114
3115 62. Added $mailstore_basename variable.
3116
3117 63. Installed patch to sieve.c from Michael Haardt.
3118
3119 64. When Exim failed to open the panic log after failing to open the main log,
3120     the original message it was trying to log was written to stderr and debug
3121     output, but if they were not available (the usual case in production), it
3122     was lost. Now it is written to syslog before the two lines that record the
3123     failures to open the logs.
3124
3125 65. Users' Exim filters run in subprocesses under the user's uid. It is
3126     possible for a "deliver" command or an alias in a "personal" command to
3127     provoke an address rewrite. If logging of address rewriting is configured,
3128     this fails because the process is not running as root or exim. There may be
3129     a better way of dealing with this, but for the moment (because 4.30 needs
3130     to be released), I have disabled address rewrite logging when running a
3131     filter in a non-root, non-exim process.
3132
3133
3134 Exim version 4.24
3135 -----------------
3136
3137  1. The buildconfig auxiliary program wasn't quoting the value set for
3138     HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
3139     not defined. This bug was masked in 4.22 by the effect that was fixed in
3140     change 4.23/1.
3141
3142  2. Some messages that were rejected after a message id was allocated were
3143     shown as "incomplete" by exigrep. It no longer does this for messages that
3144     are rejected by local_scan() or the DATA or non-SMTP ACLs.
3145
3146  3. If a Message-ID: header used a domain literal in the ID, and Exim did not
3147     have allow_domain_literals set, the ID did not get logged in the <= line.
3148     Domain literals are now always recognized in Message-ID: header lines.
3149
3150  4. The first argument for a ${extract expansion item is the key name or field
3151     number. Leading and trailing spaces in this item were not being ignored,
3152     causing some misleading effects.
3153
3154  5. When deliver_drop_privilege was set, single queue runner processes started
3155     manually (i.e. by the command "exim -q") or by the daemon (which uses the
3156     same command in the process it spins off) were not dropping privilege.
3157
3158  6. When the daemon running as "exim" started a queue runner, it always
3159     re-executed Exim in the spun-off process. This is a waste of effort when
3160     deliver_drop_privilege is set. The new process now just calls the
3161     queue-runner function directly.
3162
3163
3164 Exim version 4.23
3165 -----------------
3166
3167  1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
3168     HEADERS_CHARSET.
3169
3170  2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
3171     ignored. Though the use of -oP was forcing the writing of a pid file, it
3172     was always written to the default place.
3173
3174  3. If the message "no IP address found for host xxxx" is generated during
3175     incoming verification, it is now followed by identification of the incoming
3176     connection (so you can more easily find what provoked it).
3177
3178  4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
3179
3180  5. Added some features to "harden" Exim a bit more against certain attacks:
3181
3182     (a) There is now a build-time option called FIXED_NEVER_USERS that can
3183         be put in Local/Makefile. This is like the never_users runtime option,
3184         but it cannot be overridden. The default setting is "root".
3185
3186     (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
3187         prefix string with which any file named in a -C command line option
3188         must start.
3189
3190     (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
3191         is retained for -C and -D only if the caller of Exim is root. Without
3192         it, the exim user may also use -C and -D and retain privilege.
3193
3194     (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
3195         command line option is disabled.
3196
3197  6. Macro names set by the -D option must start with an upper case letter, just
3198     like macro names defined in the configuration file.
3199
3200  7. Added "dereference=" facility to LDAP.
3201
3202  8. Two instances of the typo "uknown" in the source files are fixed.
3203
3204  9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
3205     the Configure-Makefile script screwed up while processing it.
3206
3207 10. Incorporated PCRE 4.4.
3208
3209 11. The SMTP synchronization check was not operating right at the start of an
3210     SMTP session. For example, it could not catch a HELO sent before the client
3211     waited for the greeting. There is now a check for outstanding input at the
3212     point when the greeting is written. Because of the duplex, asynchronous
3213     nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
3214     way, but not yet received, when the check is performed.
3215
3216 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
3217     on TCP/IP sockets, because this apparently causes some broken clients to
3218     timeout.
3219
3220 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
3221     unchanged) from the Cygwin maintainer.
3222
3223 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
3224     was supported instead of testing for mbx. Effectively a typo.
3225
3226 15. The spa authenticator server code was not checking that the input it
3227     received was valid base64.
3228
3229 16. The debug output line for the "set" modifier in ACLs was not showing the
3230     name of the variable that was being set.
3231
3232 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
3233
3234 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
3235     lookup on its own. Something else was needed to trigger the lookup. For
3236     example, a match in host_lookup or the need for a host name in a host list.
3237     Now, if $sender_host_name is referenced and the host name has not yet been
3238     looked up, a lookup is performed. If the lookup fails, the variable remains
3239     empty, and $host_lookup_failed is set to "1".
3240
3241 19. Added "eqi" as a case-independent comparison operator.
3242
3243 20. The saslauthd authentication condition could segfault if neither service
3244     nor realm was specified.
3245
3246 21. If an overflowing value such as "2048M" was set for message_size_limit, the
3247     error message that was logged was misleading, and incoming SMTP
3248     connections were dropped. The message is now more accurate, and temporary
3249     errors are given to SMTP connections.
3250
3251 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
3252     (except RSET) with a 421 error, until QUIT is received. However, it was
3253     failing to send a response to QUIT.
3254
3255 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
3256     which made it impossible to use "verify = helo" in the HELO ACL. The HELO
3257     ACL is now run after the helo_try_verify_hosts code.
3258
3259 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
3260     "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
3261     case-independent, so other case variants are also recognized). Apparently
3262     some systems use these upper case variants.
3263
3264 25. If more than two messages were waiting for the same host, and a transport
3265     filter was specified for the transport, Exim sent two messages over the
3266     same TCP/IP connection, and then failed with "socket operation on non-
3267     socket" when it tried to send the third.
3268
3269 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
3270
3271 27. The extern definition of crypt16() in expand.c was not being excluded when
3272     the OS had its own crypt16() function.
3273
3274 28. Added bounce_return_body as a new option, and bounce_return_size_limit
3275     as a preferred synonym for return_size_limit, both as an option and as an
3276     expansion variable.
3277
3278 29. Added LIBS=-liconv to OS/Makefile-OSF1.
3279
3280 30. Changed the default configuration ACL to relax the local part checking rule
3281     for addresses that are not in any local domains. For these addresses,
3282     slashes and pipe symbols are allowed within local parts, but the sequence
3283     /../ is explicitly forbidden.
3284
3285 31. SPA server authentication was not clearing the challenge buffer before
3286     using it.
3287
3288 32. log_message in a "warn" ACL statement was writing to the reject log as
3289     well as to the main log, which contradicts the documentation and doesn't
3290     seem right (because no rejection is happening). So I have stopped it.
3291
3292 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
3293     However, I am unable to do any testing of this.
3294
3295 34. Fixed an infelicity in the appendfile transport. When checking directories
3296     for a mailbox, to see if any needed to be created, it was accidentally
3297     using path names with one or more superfluous leading slashes; tracing
3298     would show up entries such as stat("///home/ph10", 0xFFBEEA48).
3299
3300 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
3301     contents are added to the log line that is written for every discarded
3302     recipient. (Previously a log_message setting was ignored.)
3303
3304 36. The ${quote: operator now quotes the string if it is empty.
3305
3306 37. The install script runs exim in order to find its version number. If for
3307     some reason other than non-existence or emptiness, which it checks, it
3308     could not run './exim', it was installing it with an empty version number,
3309     i.e. as "exim-". This error state is now caught, and the installation is
3310     aborted.
3311
3312 38. An argument was missing from the function that creates an error message
3313     when Exim fails to connect to the socket for saslauthd authentication.
3314     This could cause Exim to crash, or give a corrupted message.
3315
3316 39. Added isip, isip4, and isip6 to ${if conditions.
3317
3318 40. The ACL variables $acl_xx are now saved with the message, and can be
3319     accessed later in routers, transports, and filters.
3320
3321 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
3322     strings in the file are not string-expanded.
3323
3324 42. If a MAIL command specified a SIZE value that was too large to fit into an
3325     int variable, the check against message_size_limit failed. Such values are
3326     now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
3327     day this will have to be increased, but I don't think I want to be around
3328     when emails are that large.
3329
3330
3331
3332 Exim version 4.22
3333 -----------------
3334
3335  1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
3336     iconv() is not standard in FreeBSD.
3337
3338  2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
3339     IPv6 enabled. The observed symptom was a segmentation fault on return from
3340     the function os_common_find_running_interfaces() in src/os.c.
3341
3342  3. In the check_special_case() function in daemon.c I had used "errno" as an
3343     argument name, which causes warnings on some systems. This was basically a
3344     typo, since it was named "eno" in the comments!
3345
3346  4. The code that waits for the clock to tick (at a resolution of some fraction
3347     of a second) so as to ensure message-id uniqueness was always waiting for
3348     at least one whole tick, when it could have waited for less. [This is
3349     almost certainly not relevant at current processor speeds, where it is
3350     unlikely to ever wait at all. But we try to future-proof.]
3351
3352  5. The function that sleeps for a time interval that includes fractions of a
3353     second contained a race. It did not block SIGALRM between setting the
3354     timer, and suspending (a couple of lines later). If the interval was short
3355     and the sigsuspend() was delayed until after it had expired, the suspension
3356     never ended. On busy systems this could lead to processes getting stuck for
3357     ever.
3358
3359  6. Some uncommon configurations may cause a lookup to happen in a queue runner
3360     process, before it forks any delivery processes. The open lookup caching
3361     mechanism meant that the open file or database connection was passed into
3362     the delivery process. The problem was that delivery processes always tidy
3363     up cached lookup data. This could cause a problem for the next delivery
3364     process started by the queue runner, because the external queue runner
3365     process does not know about the closure. So the next delivery process
3366     still has data in the lookup cache. In the case of a file lookup, there was
3367     no problem because closing a file descriptor in a subprocess doesn't affect
3368     the parent. However, if the lookup was caching a connection to a database,
3369     the connection was closed, and the second delivery process was likely to
3370     see errors such as "PGSQL: query failed: server closed the connection
3371     unexpectedly". The problem has been fixed by closing all cached lookups
3372     in a queue runner before running a delivery process.
3373
3374  7. Compiler warning on Linux for the second argument of iconv(), which doesn't
3375     seem to have the "const" qualifier which it has on other OS. I've
3376     parameterised it.
3377
3378  8. Change 4.21/2 was too strict. It is only if there are two authenticators
3379     *of the same type* (client or server) with the same public name that an
3380     error should be diagnosed.
3381
3382  9. When Exim looked up a host name for an IP address, but failed to find the
3383     original IP address when looking up the host name (a safety check), it
3384     output the message "<ip address> does not match any IP for NULL", which was
3385     confusing, to say the least. The bug was that the host name should have
3386     appeared instead of "NULL".
3387
3388 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
3389     user that is built into the binary, and the -C or -D options is used, root
3390     privilege is dropped before the configuration file is read. In addition,
3391     logging is switched to stderr instead of the normal log files. If the
3392     configuration then re-defines the Exim user, the unprivileged environment
3393     is probably not what is expected, so Exim logs a panic warning message (but
3394     proceeds).
3395
3396     However, if deliver_drop_privilege is set, the unprivileged state may well
3397     be exactly what is intended, so the warning has been cut out in that case,
3398     and Exim is allowed to try to write to its normal log files.
3399
3400
3401 Exim version 4.21
3402 -----------------
3403
3404  1. smtp_return_error_details was not giving details for temporary sender
3405     or receiver verification errors.
3406
3407  2. Diagnose a configuration error if two authenticators have the same public
3408     name.
3409
3410  3. Exim used not to create the message log file for a message until the first
3411     delivery attempt. This could be confusing when incoming messages were held
3412     for policy or load reasons. The message log file is now created at the time
3413     the message is received, and an initial "Received" line is written to it.
3414
3415  4. The automatically generated man page for command line options had a minor
3416     bug that caused no ill effects; however, a more serious problem was that
3417     the procedure for building the man page automatically didn't always
3418     operate. Consequently, release 4.20 contains an out-of-date version. This
3419     shouldn't happen again.
3420
3421  5. When building Exim with embedded Perl support, the script that builds the
3422     Makefile was calling 'perl' to find its compile-time parameters, ignoring
3423     any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
3424
3425  6. The freeze_tell option was not being used for messages that were frozen on
3426     arrival, either by an ACL or by local_scan().
3427
3428  7. Added the smtp_incomplete_transaction log selector.
3429
3430  8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
3431     was accepting AUTH without a new EHLO.
3432
3433  9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
3434     ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
3435     RFC.
3436
3437 10. Logging of TCP/IP connections (when configured) now happens in the main
3438     daemon process instead of the child process, so that the TCP/IP connection
3439     count is more accurate (but it can never be perfect).
3440
3441 11. The use of "drop" in a nested ACL was not being handled correctly in the
3442     outer ACL. Now, if condition failure induced by the nested "drop" causes
3443     the outer ACL verb to deny access ("accept" or "discard" after "endpass",
3444     or "require"), the connection is dropped.
3445
3446 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
3447     that yield "discard" can now be used with an "accept" or a "discard" verb,
3448     but an error is generated for any others (because I can't see a useful way
3449     to define what should happen).
3450
3451 13. When an ACL is read dynamically from a file (or anywhere else), the lines
3452     are now processed in the same way as lines in the Exim configuration file.
3453     In particular, continuation lines are supported.
3454
3455 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
3456
3457 15. Added -ti meaning -t -i.
3458
3459 16. Check for letters, digits, hyphens, and dots in the names of dnslist
3460     domains, and warn by logging if others are found.
3461
3462 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
3463     returned from GIFCONF when Exim is trying to find the list of interfaces on
3464     a host. The code in os.c has been modified to copy each ifreq to an aligned
3465     structure in all cases.
3466
3467     Also, in some cases, the returned ifreq's were being copied to a 'struct
3468     ifreq' on the stack, which was subsequently passed to host_ntoa(). That
3469     means the last couple of bytes of an IPv6 address could be chopped if the
3470     ifreq contained only a normal sockaddr (14 bytes storage).
3471
3472 18. Named domain lists were not supported in the hosts_treat_as_local option.
3473     An entry such as +xxxx was not recognized, and was treated as a literal
3474     domain name.
3475
3476 19. Ensure that header lines added by a DATA ACL are included in the reject log
3477     if the ACL subsequently rejects the message.
3478
3479 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
3480     MD5 (which is deprecated).
3481
3482 21. When testing a filter file using -bf, Exim was writing a message when it
3483     took the sender from a "From " line in the message, but it was not doing so
3484     when it took $return_path from a Return-Path: header line. It now does.
3485
3486 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
3487     with a valid header line field name (a series of printing characters
3488     terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
3489
3490 23. Changed "disc" in the source to "disk" to conform to the documentation and
3491     the book and for uniformity.
3492
3493 24. Ignore Sendmail's -Ooption=value command line item.
3494
3495 25. When execve() failed while trying to run a command in a pipe transport,
3496     Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
3497     could be confused with a return value of 69 from the command itself. This
3498     has been changed to 127, the value the shell returns if it is asked to run
3499     a non-existent command. The wording for the related log line suggests a
3500     non-existent command as the problem.
3501
3502 26. If received_header_text expands to an empty string, do not add a Received:
3503     header line to the message. (Well, it adds a token one on the spool, but
3504     marks it "old" so that it doesn't get used or transmitted.)
3505
3506 27. Installed eximstats 1.28 (addition of -nt option).
3507
3508 28. There was no check for failure on the call to getsockname() in the daemon
3509     code. This can fail if there is a shortage of resources on the system, with
3510     ENOMEM, for example. A temporary error is now given on failure.
3511
3512 29. Contrary to the C standard, it seems that in some environments, the
3513     equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
3514     program. Exim now does this explicitly; it affects the formatting of
3515     timestamps using strftime().
3516
3517 30. If exiqsumm was given junk data, it threw up some uninitialized variable
3518     complaints. I've now initialized all the variables, to avoid this.
3519
3520 32. Header lines added by a system filter were not being "seen" during
3521     transport-time rewrites.
3522
3523 33. The info_callback() function passed to OpenSSL is set up with type void
3524     (*)(SSL *, int, int), as described somewhere. However, when calling the
3525     function (actually a macro) that sets it up, the type void(*)() is
3526     expected. I've put in a cast to prevent warnings from picky compilers.
3527
3528 34. If a DNS black list lookup found a CNAME record, but there were no A
3529     records associated with the domain it pointed at, Exim crashed.
3530
3531 35. If a DNS black list lookup returned more than one A record, Exim ignored
3532     all but the first. It now scans all returned addresses if a particular IP
3533     value is being sought. In this situation, the contents of the
3534     $dnslist_value variable are a list of all the addresses, separated by a
3535     comma and a space.
3536
3537 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
3538     to accept a host name and all its aliases if the forward lookup for any of
3539     them yielded the IP address of the incoming connection. Now it accepts only
3540     those names whose forward lookup yields the correct IP address. Any other
3541     names are discarded. This closes a loophole whereby a rogue DNS
3542     administrator could create reverse DNS records to break through a
3543     wildcarded host restriction in an ACL.
3544
3545 37. If a user filter or a system filter that ran in a subprocess used any of
3546     the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
3547     the wrong values were passed to the pipe command ($thisaddress had the
3548     value of $0, $0 had the value of $1, etc). This bug was introduced by
3549     change 4.11/101, and not discovered because I wrote an inadequate test. :-(
3550
3551 38. Improved the line breaking for long SMTP error messages from ACLs.
3552     Previously, if there was no break point between 40 and 75 characters, Exim
3553     left the rest of the message alone. Two changes have been made: (a) I've
3554     reduced the minimum length to 35 characters; (b) if it can't find a break
3555     point between 35 and 75 characters, it looks ahead and uses the first one
3556     that it finds. This may give the occasional overlong line, but at least the
3557     remaining text gets split now.
3558
3559 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
3560     file descriptors might be low, and that setting 1000 would always raise it.
3561     It turns out that in some environments, the limit is already over 1000 and
3562     that lowering it causes trouble. So now Exim takes care not to decrease it.
3563
3564 40. When delivering a message, the value of $return_path is set to $sender_
3565     address at the start of routing (routers may change the value). By an
3566     oversight, this default was not being set up when an address was tested by
3567     -bt or -bv, which affected the outcome if any router or filter referred to
3568     $return_path.
3569
3570 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
3571     log only when "message" or "log_message" are set. However, if one of the
3572     conditions was an address verification, or a call to a nested ACL, the
3573     messages generated by the underlying test were being passed through. This
3574     no longer happens. The underlying message is available in $acl_verify_
3575     message for both "message" and "log_message" expansions, so it can be
3576     passed through if needed.
3577
3578 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
3579     new expansion $bh_ to give the encoded byte string without charset
3580     translation. Translation happens only if iconv() is available; HAVE_ICONV
3581     indicates this at build time. HEADERS_CHARSET gives the charset to
3582     translate to; headers_charset can change it in the configuration, and
3583     "headers charset" can change it in an individual filter file.
3584
3585 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
3586     that creates RFC 2047 encoded "words" labels them as that charset instead
3587     of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
3588     expansion operator; (ii) when Exim creates a From: line for a local
3589     message; (iii) when a header line is rewritten to include a "phrase" part.
3590
3591 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
3592     buggy, causing it to skip the first lines of messages whose message ID
3593     ended in 'D'. This would not have bitten before Exim release 4.14, because
3594     message IDs were unlikely to end in 'D' before then. The effect was to have
3595     incorrect size information for certain domains.
3596
3597 45. #include "config.h" was missing at the start of the crypt16.c module. This
3598     caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
3599     noticed.
3600
3601 46. If there was a timeout during a "random" callout check, Exim treated it as
3602     a failure of the random address, and carried on sending RSET and the real
3603     address. If the delay was just some slowness somewhere, the response to the
3604     original RCPT would be taken as a response to RSET and so on, causing
3605     mayhem of various kinds.
3606
3607 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
3608     when I implemented it. It didn't allow for the fact that some option values
3609     may legitimatetly be negative (e.g. size_addition), and it didn't even do
3610     the right test for positive values.
3611
3612 48. Domain names in DNS records are case-independent. Exim always looks them up
3613     in lower case. Some resolvers return domain names in exactly the case they
3614     appear in the zone file, that is, they may contain uppercase letters. Not
3615     all resolvers do this - some return always lower case. Exim was treating a
3616     change of case by a resolver as a change of domain, similar to a widening
3617     of a domain abbreviation. This triggered its re-routing code and so it was
3618     trying to route what was effectively the same domain again. This normally
3619     caused routing to fail (because the router wouldn't handle the domain
3620     twice). Now Exim checks for this case specially, and just changes the
3621     casing of the domain that it ultimately uses when it transmits the message
3622     envelope.
3623
3624 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
3625     module.
3626
3627 50. If a filter generated a file delivery with a non-absolute name (possible if
3628     no home directory exists for the router), the forbid_file option was not
3629     forbidding it.
3630
3631 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
3632     the existing equality matching.
3633
3634 52. Exim was using ints instead of ino_t variables in some places where it was
3635     dealing with inode numbers.
3636
3637 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
3638     TMPDIR="/tmp"), Exim checks for the presence of an environment variable
3639     called TMPDIR, and if it finds it is different, it changes its value.
3640
3641 54. The smtp_printf() function is now made available to local_scan() so
3642     additional output lines can be written before returning. There is also an
3643     smtp_fflush() function to enable the detection of a dropped connection.
3644     The variables smtp_input and smtp_batched_input are exported to
3645     local_scan().
3646
3647 55. Changed the default runtime configuration: the message "Unknown user"
3648     has been removed from the ACL, and instead placed on the localuser router,
3649     using the cannot_route_message feature. This means that any verification
3650     failures that generate their own messages won't get overridden. Similarly,
3651     the "Unrouteable address" message that was in the ACL for unverifiable
3652     relay addresses has also been removed.
3653
3654 56. Added hosts_avoid_esmtp to the smtp transport.
3655
3656 57. The exicyclog script was not checking for the esoteric option
3657     CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
3658     will work only if exicyclog is run under the appropriate euid.
3659
3660 58. Following a discussion on the list, the rules by which Exim recognises line
3661     endings on incoming messages have been changed. The -dropcr and drop_cr
3662     options are now no-ops, retained only for backwards compatibility. The
3663     following line terminators are recognized: LF CRLF CR. However, special
3664     processing applies to CR:
3665
3666     (i)  The sequence CR . CR does *not* terminate an incoming SMTP message,
3667          nor a local message in the state where . is a terminator.
3668
3669     (ii) If a bare CR is encountered in a header line, an extra space is added
3670          after the line terminator so as not to end the header. The reasoning
3671          behind this is that bare CRs in header lines are most likely either
3672          to be mistakes, or people trying to play silly games.
3673
3674 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
3675     was being incorrectly given as 18 bytes larger than it should have been.
3676     This is a VOB (very old bug).
3677
3678 60. This may never have affected anything current, but just in case it has:
3679     When the local host is found other than at the start of a list of hosts,
3680     the local host, those with the same MX, and any that follow, are discarded.
3681     When the list in question was part of a longer list of hosts, the following
3682     hosts (not currently being processed) were also being discarded. This no
3683     longer happens. I'm not sure if this situation could ever has previously
3684     arisen.
3685
3686 61. Added the "/MX" feature to lists of hosts in the manualroute and query
3687     program routers.
3688
3689 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
3690     header. This is something that is recommended in a new Internet Draft, and
3691     is something that is documented as being done by Sendmail. There are two
3692     possible values. For messages generated by the autoreply transport, Exim
3693     adds:
3694
3695       Auto-Submitted: auto-replied
3696
3697     whereas for all other generated messages (e.g. bounces) it adds
3698
3699       Auto-Submitted: auto-generated
3700
3701 63. The "personal" condition in filters now includes a test for the
3702     Auto-Submitted: header. If it contains the string "auto-" the message it
3703     not considered personal.
3704
3705 64. Added rcpt_include_affixes as a generic transport option.
3706
3707 65. Added queue_only_override (default true).
3708
3709 66. Added the syslog_duplication option.
3710
3711 67. If what should have been the first header line of a message consisted of
3712     a space followed by a colon, Exim was mis-interpreting it as a header line.
3713     It isn't of course - it is syntactically invalid and should therefore be
3714     treated as the start of the message body. The misbehaviour could have
3715     caused a number of strange effects, including loss of data in subsequent
3716     header lines, and spool format errors.
3717
3718 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
3719     client host had authenticated. This control can now be exercised by an ACL
3720     for more flexibility.
3721
3722 69. By default, callouts do not happen when testing with -bh. There is now a
3723     variant, -bhc, which does actually run the callout code, including
3724     consulting and updating the callout cache.
3725
3726 70. Added support for saslauthd authentication, courtesy of Alexander
3727     Sabourenkov.
3728
3729 71. If statvfs() failed on the spool or log directories while checking their
3730     size for availability, Exim confusingly gave the error "space shortage".
3731     Furthermore, in debugging mode it crashed with a floating point exception.
3732     These checks are done if check_{spool,log}_{space,inodes} are set, and when
3733     an SMTP message arrives with SIZE= on the MAIL command. As this is a really
3734     serious problem, Exim now writes to the main and panic logs when this
3735     happens, with details of the failure. It then refuses to accept the
3736     incoming message, giving the message "spool directory problem" or "log
3737     directory problem" with a 421 code for SMTP messages.
3738
3739 72. When Exim is about to re-exec itself, it ensures that the file descriptors
3740     0, 1, and 2 exist, because some OS complain for execs without them (see
3741     ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
3742     descriptors. However, the code omitted to check that the open succeeded,
3743     causing mysterious errors if for some reason the permissions on /dev/null
3744     got screwed. Now Exim writes a message to the main and panic logs, and
3745     bombs out if it can't open /dev/null.
3746
3747 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
3748     interact so that it is all more flexible. It is supposed to remain
3749     backwards compatible. Also added extra_local_interfaces.
3750
3751 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
3752     to bomb out with an assertion failure - to the client this appears as a
3753     connection drop. This problem occurs in the part of the code that was taken
3754     from the Samba project. Fortunately, the assertion is in a very simple
3755     function, so I have fixed this by reproducing the function inline in the
3756     one place where it is called, and arranging for authentication to fail
3757     instead of killing the process with assert().
3758
3759 75. The SPA client code was not working when the server requested OEM rather
3760     than Unicode encoding.
3761
3762 76. Added code to make require_files with a specific uid setting more usable in
3763     the case where statting the file as root fails - usually a non-root-mounted
3764     NFS file system. When this happens and the failure is EACCES, Exim now
3765     forks a subprocess and does the per-uid checking as the relevant uid.
3766
3767 77. Added process_log_path.
3768
3769 78. If log_file_path was not explicitly set, a setting of check_log_space or
3770     check_log_inodes was ignored.
3771
3772 79. If a space check for the spool or log partitions fails, the incident is now
3773     logged. Of course, in the latter case the data may get lost...
3774
3775 80. Added the %p formatting code to string_format() so that it can be used to
3776     print addresses in debug_print(). Adjusted all the address printing in the
3777     debugging in store.c to use %p rather than %d.
3778
3779 81. There was a concern that a line of code in smtp_in.c could overflow a
3780     buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
3781     initially expressed, the concern was not well-founded, because trailing
3782     spaces are removed early. However, if the trailing spaces were followed by
3783     a NULL, they did not get removed, so the overflow was possible. Two fixes
3784     were applied:
3785
3786     (a) I re-wrote the offending code in a cleaner fashion.
3787     (b) If an incoming SMTP command contains a NULL character, it is rejected
3788         as invalid.
3789
3790 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
3791     runs initgroups(), so that if the Exim user is in any additional groups,
3792     they will be used during message reception.
3793
3794
3795 Exim version 4.20
3796 -----------------
3797
3798 The change log for 4.20 and earlier releases has been archived.
3799
3800 ****