1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.441 2006/12/04 15:15:00 ph10 Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
9 TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
10 leftover -K file (the existence of which was triggered by #402).
11 While we were at it, introduced process PID as part of the -K
12 filename. This should rule out race conditions when creating
15 TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
16 processing considerably. Previous code took too long for large mails,
17 triggering a timeout which in turn triggers #401.
19 TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
20 in the DK code in transports.c. sendfile() is not really portable,
21 hence the _LINUX specificness.
23 TF/01 In the add_headers option to the mail command in an Exim filter,
24 there was a bug that Exim would claim a syntax error in any
25 header after the first one which had an odd number of characters
28 PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
29 callout verification, Exim cached a "reject" for the entire domain. This
30 is correct for most verifications, but it is not correct for a recipient
31 verification with use_sender or use_postmaster set, because in that case
32 the callout does not use MAIL FROM:<>. Exim now distinguishes the special
33 case of MAIL FROM:<> rejection from other early rejections (e.g.
34 rejection of HELO). When verifying a recipient using a non-null MAIL
35 address, the cache is ignored if it shows MAIL FROM:<> rejection.
36 Whatever the result of the callout, the value of the domain cache is
37 left unchanged (for any other kind of callout, getting as far as trying
38 RCPT means that the domain itself is ok).
40 PH/02 Tidied a number of unused variable and signed/unsigned warnings that
43 PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
44 manifest itself as EPIPE rather than ECONNECT. When tidying away a
45 session, the daemon ignores ECONNECT errors and logs others; it now
46 ignores EPIPE as well.
48 PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
49 (quoted-printable decoding).
51 PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
52 later the small subsequent patch to fix an introduced bug.
54 PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
56 PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
58 PH/08 An error is now given if message_size_limit is specified negative.
60 PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
61 to be given (somewhat) arbitrary names.
63 JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
66 JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
67 miscellaneous code fixes
69 PH/10 Added the log_reject_target ACL modifier to specify where to log
72 PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
73 hostname. This is wrong, because it relates to the incoming message (and
74 probably the interface on which it is arriving) and not to the outgoing
75 callout (which could be using a different interface). This has been
76 changed to use the value of the helo_data option from the smtp transport
77 instead - this is what is used when a message is actually being sent. If
78 there is no remote transport (possible with a router that sets up host
79 addresses), $smtp_active_hostname is used.
81 PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
82 tweaks were necessary in order to get it to work (see also 21 below):
83 (a) The code assumed that strncpy() returns a negative number on buffer
84 overflow, which isn't the case. Replaced with Exim's string_format()
86 (b) There were several signed/unsigned issues. I just did the minimum
87 hacking in of casts. There is scope for a larger refactoring.
88 (c) The code used strcasecmp() which is not a standard C function.
89 Replaced with Exim's strcmpic() function.
90 (d) The code set only $1; it now sets $auth1 as well.
91 (e) A simple test gave the error "authentication client didn't specify
92 service in request". It would seem that Dovecot has changed its
93 interface. Fortunately there's a specification; I followed it and
94 changed what the client sends and it appears to be working now.
96 PH/13 Added $message_headers_raw to provide the headers without RFC 2047
99 PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
100 address A is aliased to B and C, where B exists and C does not. Without
101 -v the output is "A verified" because verification stops after a
102 successful redirection if more than one address is generated. However,
103 with -v the child addresses are also verified. Exim was outputting "A
104 failed to verify" and then showing the successful verification for C,
105 with its parentage. It now outputs "B failed to verify", showing B's
106 parentage before showing the successful verification of C.
108 PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
109 look up a TXT record in a specific list after matching in a combined
112 PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
113 RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
114 they consult the DNS. I had assumed they would set it the way they
115 wanted; and indeed my experiments on Linux seem to show that in some
116 cases they do (I could influence IPv6 lookups but not IPv4 lookups).
117 To be on the safe side, however, I have now made the interface to
118 host_find_byname() similar to host_find_bydns(), with an argument
119 containing the DNS resolver options. The host_find_byname() function now
120 sets these options at its start, just as host_find_bydns() does. The smtp
121 transport options dns_qualify_single and dns_search_parents are passed to
122 host_find_byname() when gethostbyname=TRUE in this transport. Other uses
123 of host_find_byname() use the default settings of RES_DEFNAMES
124 (qualify_single) but not RES_DNSRCH (search_parents).
126 PH/17 Applied (a modified version of) Nico Erfurth's patch to make
127 spool_read_header() do less string testing, by means of a preliminary
128 switch on the second character of optional "-foo" lines. (This is
129 overdue, caused by the large number of possibilities that now exist.
130 Originally there were few.) While I was there, I also converted the
131 str(n)cmp tests so they don't re-test the leading "-" and the first
132 character, in the hope this might squeeze out yet more improvement.
134 PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
135 flag allowing group syntax was set by the header_syntax check but not
136 turned off, possible causing trouble later; (2) The flag was not being
137 set at all for the header_verify test, causing "group"-style headers to
138 be rejected. I have now set it in this case, and also caused header_
139 verify to ignore an empty address taken from a group. While doing this, I
140 came across some other cases where the code for allowing group syntax
141 while scanning a header line wasn't quite right (mostly, not resetting
142 the flag correctly in the right place). These bugs could have caused
143 trouble for malformed header lines. I hope it is now all correct.
145 PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
146 with the "reply" argument non-NULL. The code, however (which originally
147 came from elsewhere) had *some* tests for NULL when it wrote to *reply,
148 but it didn't always do it. This confused somebody who was copying the
149 code for some other use. I have removed all the tests.
151 PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
152 feature that was used to support insecure browsers during the U.S. crypto
153 embargo. It requires special client support, and Exim is probably the
154 only MTA that supported it -- and would never use it because real RSA is
155 always available. This code has been removed, because it had the bad
156 effect of slowing Exim down by computing (never used) parameters for the
157 RSA_EXPORT functionality.
159 PH/21 On the advice of Timo Sirainen, added a check to the dovecot
160 authenticator to fail if there's a tab character in the incoming data
161 (there should never be unless someone is messing about, as it's supposed
162 to be base64-encoded). Also added, on Timo's advice, the "secured" option
163 if the connection is using TLS or if the remote IP is the same as the
164 local IP, and the "valid-client-cert option" if a client certificate has
167 PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
168 authenticators. This can be used for authorization after authentication
169 succeeds. (In the case of plaintext, it servers for both authentication
172 PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
173 if any retry times were supplied.
175 PH/24 Exim crashed if verify=helo was activated during an incoming -bs
176 connection, where there is no client IP address to check. In this
177 situation, the verify now always succeeds.
179 PH/25 Applied John Jetmore's -Mset patch.
181 PH/26 Added -bem to be like -Mset, but loading a message from a file.
183 PH/27 In a string expansion for a processed (not raw) header when multiple
184 headers of the same name were present, leading whitespace was being
185 removed from all of them, but trailing whitespace was being removed only
186 from the last one. Now trailing whitespace is removed from each header
187 before concatenation. Completely empty headers in a concatenation (as
190 PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
191 Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
193 PH/29 [Removed. This was a change that I later backed out, and forgot to
194 correct the ChangeLog entry (that I had efficiently created) before
195 committing the later change.]
197 PH/30 Exim was sometimes attempting to deliver messages that had suffered
198 address errors (4xx response to RCPT) over the same connection as other
199 messages routed to the same hosts. Such deliveries are always "forced",
200 so retry times are not inspected. This resulted in far too many retries
201 for the affected addresses. The effect occurred only when there were more
202 hosts than the hosts_max_try setting in the smtp transport when it had
203 the 4xx errors. Those hosts that it had tried were not added to the list
204 of hosts for which the message was waiting, so if all were tried, there
205 was no problem. Two fixes have been applied:
207 (i) If there are any address or message errors in an SMTP delivery, none
208 of the hosts (tried or untried) are now added to the list of hosts
209 for which the message is waiting, so the message should not be a
210 candidate for sending over the same connection that was used for a
211 successful delivery of some other message. This seems entirely
212 reasonable: after all the message is NOT "waiting for some host".
213 This is so "obvious" that I'm not sure why it wasn't done
214 previously. Hope I haven't missed anything, but it can't do any
215 harm, as the worst effect is to miss an optimization.
217 (ii) If, despite (i), such a delivery is accidentally attempted, the
218 routing retry time is respected, so at least it doesn't keep
219 hammering the server.
221 PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
222 in ${readsocket because some servers need this prod.
224 PH/32 Added some extra debug output when updating a wait-xxx database.
226 PH/33 The hint "could be header name not terminated by colon", which has been
227 given for certain expansion errors for a long time, was not being given
228 for the ${if def:h_colon_omitted{... case.
230 PH/34 The spec says: "With one important exception, whenever a domain list is
231 being scanned, $domain contains the subject domain." There was at least
232 one case where this was not true.
234 PH/35 The error "getsockname() failed: connection reset by peer" was being
235 written to the panic log as well as the main log, but it isn't really
236 panic-worthy as it just means the connection died rather early on. I have
237 removed the panic log writing for the ECONNRESET error when getsockname()
240 PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
241 runs only) independently of the message's sender address. This meant
242 that, if the 4xx error was in fact related to the sender, a different
243 message to the same recipient with a different sender could confuse
244 things. In particualar, this can happen when sending to a greylisting
245 server, but other circumstances could also provoke similar problems.
246 I have changed the default so that the retry time for these errors is now
247 based a combination of the sender and recipient addresses. This change
248 can be overridden by setting address_retry_include_sender=false in the
251 PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
252 remote server are returned as part of bounce messages. This was not
253 happening for LMTP over a pipe (the lmtp transport), but now it is the
254 same for both kinds of LMTP.
256 PH/38 Despite being documented as not happening, Exim was rewriting addresses
257 in header lines that were in fact CNAMEs. This is no longer the case.
259 PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
260 and queue runs started by the daemon processed all messages. This has
261 been fixed so that -R and -S can now usefully be given with -q<time>.
263 PH/40 Import PCRE release 6.7 (fixes some bugs).
265 PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
267 PH/42 Give an error if -q is specified more than once.
269 PH/43 Renamed the variables $interface_address and $interface_port as
270 $received_ip_address and $received_port, to make it clear that these
271 values apply to message reception, and not to the outgoing interface when
272 a message is delivered. (The old names remain recognized, of course.)
274 PH/44 There was no timeout on the connect() call when using a Unix domain
275 socket in the ${readsocket expansion. There now is.
277 PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
278 be meaningful with "accept".
280 SC/01 Eximstats V1.43
281 Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
283 SC/02 Eximstats V1.44
284 Use a glob alias rather than an array ref in the generated
285 parser. This improves both readability and performance.
287 SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
288 Collect SpamAssassin and rejection statistics.
289 Don't display local sender or destination tables unless
290 there is data to show.
291 Added average volumes into the top table text output.
293 SC/04 Eximstats V1.46
294 Collect data on the number of addresses (recipients)
295 as well as the number of messages.
297 SC/05 Eximstats V1.47
298 Added 'Message too big' to the list of mail rejection
299 reasons (thanks to Marco Gaiarin).
301 SC/06 Eximstats V1.48
302 Mainlog lines which have GMT offsets and are too short to
303 have a flag are now skipped.
305 SC/07 Eximstats V1.49 (Alain Williams)
306 Added the -emptyok flag.
308 SC/08 Eximstats V1.50
309 Fixes for obtaining the IP address from reject messages.
311 JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
312 (added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
313 whitesspace changes from 4.64-PH/27
315 JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
318 JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
319 are found, allow negative numbers in numeric criteria)
321 JJ/06 exipick.20061117.2, added new $message_body_missing variable
323 JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
324 to match changes made in 4.64-PH/43
326 PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
328 PH/47 Put in an explicit test for a DNS lookup of an address record where the
329 "domain" is actually an IP address, and force a failure. This locks out
330 those revolvers/nameservers that support "A-for-A" lookups, in
331 contravention of the specifications.
333 PH/48 When a host name was looked up from an IP address, and the subsequent
334 forward lookup of the name timed out, the host name was left in
335 $sender_host_name, contrary to the specification.
337 PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
338 restricted to single-key lookups, Exim was not diagnosing an error if
339 * or *@ was used with a query-style lookup.
341 PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
347 SC/01 Use a glob alias rather than an array ref in eximstats generated
348 parser. This improves both readability and performance.
350 SC/02 Collect SpamAssassin and rejection statistics in eximstats.
351 Don't display local sender or destination tables in eximstats unless
352 there is data to show.
353 Added average volumes into the eximstats top table text output.
355 SC/03 Collect data on the number of addresses (recipients) as well
356 as the number of messages in eximstats.
358 TF/01 Correct an error in the documentation for the redirect router. Exim
359 does (usually) call initgroups() when daemonizing.
361 TF/02 Call initgroups() when dropping privilege in exim.c, so that Exim runs
362 with consistent privilege compared to when running as a daemon.
364 TF/03 Note in the spec that $authenticated_id is not set for local
365 submissions from trusted users.
367 TF/04 The ratelimit per_rcpt option now works correctly in acl_not_smtp.
368 Thanks to Dean Brooks <dean@iglou.com> for the patch.
370 TF/05 Make it easier to get SMTP authentication and TLS/SSL support working
371 by adding some example configuration directives to the default
372 configuration file. A little bit of work is required to uncomment the
373 directives and define how usernames and passwords are checked, but
374 there is now a framework to start from.
376 PH/01 Added #define LDAP_DEPRECATED 1 to ldap.c because some of the "old"
377 functions that Exim currently uses aren't defined in ldap.h for OpenLDAP
378 without this. I don't know how relevant this is to other LDAP libraries.
380 PH/02 Add the verb name to the "unknown ACL verb" error.
382 PH/03 Magnus Holmgren's patch for filter_prepend_home.
384 PH/03 Fixed Bugzilla #101: macro definition between ACLs doesn't work.
386 PH/04 Applied Magnus Holmgren's patch to fix Bugzilla #98: transport's home
387 directory not expanded when it should be if an expanded home directory
388 was set for the address (which is overridden by the transport).
390 PH/05 Applied Alex Kiernan's patch to fix Bugzilla #99: a problem with
393 PH/06 Added acl_not_smtp_start, based on Johannes Berg's patch, and set the
394 bit to forbid control=suppress_local_fixups in the acl_not_smtp ACL,
395 because it is too late at that time, and has no effect.
397 PH/07 Changed ${quote_pgsql to quote ' as '' instead of \' because of a
398 security issue with \' (bugzilla #107). I could not use the
399 PQescapeStringConn() function, because it needs a PGconn value as one of
402 PH/08 When testing addresses using -bt, indicate those final addresses that
403 are duplicates that would not cause an additional delivery. At least one
404 person was confused, thinking that -bt output corresponded to deliveries.
405 (Suppressing duplicates isn't a good idea as you lose the information
406 about possibly different redirections that led to the duplicates.)
408 PH/09 Applied patch from Erik to use select() instead of poll() in spam.c on
409 systems where poll() doesn't work, in particular OS X.
411 PH/10 Added more information to debugging output for retry time not reached.
413 PH/11 Applied patch from Arkadiusz Miskiewicz to apply a timeout to read
414 operations in malware.c.
416 PH/12 Applied patch from Magnus Holmgren to include the "h" tag in Domain Keys
419 PH/13 If write_rejectlog was set false when logging was sent to syslog with
420 syslog_duplication set false, log lines that would normally be written
421 both the the main log and to the reject log were not written to syslog at
424 PH/14 In the default configuration, change the use of "message" in ACL warn
425 statements to "add_header".
427 PH/15 Diagnose a filter syntax error for "seen", "unseen", or "noerror" if not
428 not followed by a command (e.g. "seen endif").
430 PH/16 Recognize SMTP codes at the start of "message" in ACLs and after :fail:
431 and :defer: in a redirect router. Add forbid_smtp_code to suppress the
434 PH/17 Added extra conditions to the default value of delay_warning_condition
438 { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
439 { match{$h_precedence:}{(?i)bulk|list|junk} } \
440 { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
443 The Auto-Submitted: and various List- headers are standardised, whereas I
444 don't think Precedence: ever was.
446 PH/18 Refactored debugging code in route_finduser() to show more information,
447 in particular, the error code if getpwnam() issues one.
449 PH/19 Added PQsetClientEncoding(conn, "SQL_ASCII") to the pgsql code module.
450 This is apparently needed in addition to the PH/07 change above to avoid
451 any possible encoding problems.
453 PH/20 Perl can change the locale. Exim was resetting it after a ${perl call,
454 but not after initializing Perl.
456 PH/21 Added a call to PQsetNoticeProcessor() to catch pgsql "notices" and
457 output them only if debugging. By default they are written stderr,
458 apparently, which is not desirable.
460 PH/22 Added Alain Williams' LDAP patch to support setting REFERRALS=off on
463 JJ/01 exipick: added --reverse (and -R synonym), --random, --size, --sort and
466 JJ/02 exipick: rewrote --help documentation to hopefully make more clear.
468 PH/23 Made -oMaa and -oMt work with -bh and -bs to pretend the connection is
469 authenticated or an ident call has been made. Suppress the default
470 values for $authenticated_id and $authenticated_sender (but permit -oMai
471 and -oMas) when testing with -bh.
473 PH/24 Re-jigged the order of the tests in the default configuration so that the
474 tests for valid domains and recipients precede the DNS black list and CSA
475 tests, on the grounds that those ones are more expensive.
477 PH/25 Exim was not testing for a space following SMTP commands such as EHLO
478 that require one. Thus, EHLORHUBARB was interpreted as a valid command.
479 This bug exists in every version of Exim that I still have, right back to
482 PH/26 (n)wildlsearch lookups are documented as being done case-insensitively.
483 However, an attempt to turn on case-sensitivity in a regex key by
484 including (?-i) didn't work because the subject string was already
485 lowercased, and the effects were non-intuitive. It turns out that a
486 one-line patch can be used to allow (?-i) to work as expected.
492 TF/01 Fix the add_header change below (4.61 PH/55) which had a bug that (amongst
493 other effects) broke the use of negated acl sub-conditions.
495 PH/01 ${readsocket now supports Internet domain sockets (modified John Jetmore
498 PH/02 When tcp-wrappers is called from Exim, it returns only "deny" or "allow".
499 "Deny" causes Exim to reject the incoming connection with a 554 error.
500 Unfortunately, if there is a major crisis, such as a disk failure,
501 tcp-wrappers gives "deny", whereas what one would like would be some
502 kind of temporary error. A kludge has been added to help with this.
503 Before calling hosts_ctl(), errno is set zero. If the result is "deny", a
504 554 error is used if errno is still zero or contains ENOENT (which occurs
505 if either of the /etc/hosts.{allow,deny} files is missing). Otherwise, a
508 PH/03 Add -lutil to the default FreeBSD LIBS setting.
510 PH/04 Change PH/19 for 4.61 was too wide. It should not be applied to host
511 errors. Otherwise a message that provokes a temporary error (when other
512 messages do not) can cause a whole host to time out.
514 PH/05 Batch deliveries by appendfile and pipe transports did not work when the
515 addresses were routed directly to files or pipes from a redirect router.
516 File deliveries just didn't batch; pipe deliveries might have suffered
519 PH/06 A failure to get a lock for a hints database would erroneously always say
520 "Failed to get write lock", even when it was really a read lock.
522 PH/07 The appendfile transport was creating MBX lock files with a fixed mode
523 of 0600. This has been changed to use the value of the lockfile_mode
524 option (which defaults to 0600).
526 PH/08 Applied small patch from the Sieve maintainer.
528 PH/09 If maildir_quota_directory_regex was set to exclude (say) the .Trash
529 folder from quota calculations, a direct delivery into this folder messed
530 up the contents of the maildirsize file. This was because the regex was
531 used only to exclude .Trash (or whatever) when the size of the mailbox
532 was calculated. There was no check that a delivery was happening into an
533 excluded directory. This bug has been fixed by ignoring all quota
534 processing for deliveries into excluded directories.
536 PH/10 Added the maildirfolder_create_regex option to appendfile.
542 PH/01 The code for finding all the local interface addresses on a FreeBSD
543 system running IPv6 was broken. This may well have applied to all BSD
544 systems, as well as to others that have similar system calls. The broken
545 code found IPv4 interfaces correctly, but gave incorrect values for the
546 IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
547 that it would not match correctly against @[] and not recognize the IPv6
550 PH/02 The ipliteral router was not recognizing addresses of the form user@
551 [ipv6:....] because it didn't know about the "ipv6:" prefix.
553 PH/03 Added disable_ipv6.
555 PH/04 Changed $reply_address to use the raw form of the headers instead of the
556 decoded form, because it is most often used to construct To: headers
557 lines in autoreplies, and the decoded form may well be syntactically
558 invalid. However, $reply_address has leading white space removed, and all
559 newlines turned into spaces so that the autoreply transport does not
562 PH/05 If group was specified without a user on a router, and no group or user
563 was specified on a transport, the group from the router was ignored.
565 PH/06 Increased the number of ACL variables to 20 of each type, and arranged
566 for visible compile-time settings that can be used to change these
567 numbers, for those that want even more. Backwards compatibility with old
568 spool files has been maintained. However, going back to a previous Exim
569 release will lost any variables that are in spool files.
571 PH/07 Two small changes when running in the test harness: increase delay when
572 passing a TCP/IP connection to a new process, in case the original
573 process has to generate a bounce, and remove special handling of
574 127.0.0.2 (sic), which is no longer necessary.
576 PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
577 be the same on different OS.
579 PH/09 Moved a debug statement in filter processing to avoid a race problem when
582 JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
583 whether --show-vars was specified or not
585 JJ/02 exipick: Added support for new ACL variable spool format introduced
588 PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
589 syntactically invalid From: or Reply-to: line, and a filter used this to
590 generate an autoreply, and therefore failed to obtain an address for the
591 autoreply, Exim could try to deliver to a non-existent relative file
592 name, causing unrelated and misleading errors. What now happens is that
593 it logs this as a hard delivery error, but does not attempt to create a
596 PH/11 The exinext utility has a -C option for testing purposes, but although
597 the given file was scanned by exinext itself; it wasn't being passed on
598 when Exim was called.
600 PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
601 an end-of-file indication when reading a command response.
603 PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
604 compiled. In many other places in Exim, IPv6 addresses are always
605 recognized, so I have changed this. It also means that IPv4 domain
606 literals of the form [IPV4:n.n.n.n] are now always recognized.
608 PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
609 used if the router is not running as root, for example, when verifying at
610 ACL time, or when using -bh. The debugging output from this situation was
611 non-existent - all you got was a failure to exec. I have made two
614 (a) Failures to set uid/gid, the current directory, or a process leader
615 in a subprocess such as that created by queryprogram now generate
616 suitable debugging ouput when -d is set.
618 (b) The queryprogram router detects when it is not running as root,
619 outputs suitable debugging information if -d is set, and then runs
620 the subprocess without attempting to change uid/gid.
622 PH/15 Minor change to Makefile for building test_host (undocumented testing
625 PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
626 additional section of a DNS packet that returns MX or SRV records.
627 Instead, it always explicitly searches for A/AAAA records. This avoids
628 major problems that occur when a DNS server includes only records of one
629 type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
630 fixed another bug: if SRV records were looked up and the corresponding
631 address records were *not* found in the additional section, the port
632 values from the SRV records were lost.
634 PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
635 using the correct key (the original address) when searching the retry
636 rules in order to find which one to use for generating the retry hint.
638 PH/18 If quota_warn_message contains a From: header, Exim now refrains from
639 adding the default one. Similarly, if it contains a Reply-To: header, the
640 errors_reply_to option, if set, is not used.
642 PH/19 When calculating a retry time, Exim used to measure the "time since
643 failure" by looking at the "first failed" field in the retry record. Now
644 it does not use this if it is later than than the arrival time of the
645 message. Instead it uses the arrival time. This makes for better
646 behaviour in cases where some deliveries succeed, thus re-setting the
647 "first failed" field. An example is a quota failure for a huge message
648 when small messages continue to be delivered. Without this change, the
649 "time since failure" will always be short, possible causing more frequent
650 delivery attempts for the huge message than are intended.
651 [Note: This change was subsequently modified - see PH/04 for 4.62.]
653 PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
654 $1, $2, $3) because the numerical variables can be reset during some
655 expansion items (e.g. "match"), thereby losing the authentication data.
657 PH/21 Make -bV show the size of off_t variables so that the test suite can
658 decide whether to run tests for quotas > 2G.
660 PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold,
661 mailbox_size, and mailbox_filecount in the appendfile transport. If a
662 filecount value is greater than 2G or if a quota value is greater than 2G
663 on a system where the size of off_t is not greater than 4, a panic error
666 PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can
667 never match. The debug and -bh output now contains an explicit error
668 message indicating a malformed IPv4 address or mask.
670 PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address
671 1.2.3.4 without a mask. Now it is not recognized as an IP address, and
674 PH/25 Do not write to syslog when running in the test harness. The only
675 occasion when this arises is a failure to open the main or panic logs
676 (for which there is an explicit test).
678 PH/26 Added the /no_tell option to "control=freeze".
680 PH/27 If a host name lookup failed very early in a connection, for example, if
681 the IP address matched host_lookup and the reverse lookup yielded a name
682 that did not have a forward lookup, an error message of the form "no IP
683 address found for host xxx.xxx.xxx (during SMTP connection from NULL)"
684 could be logged. Now it outputs the IP address instead of "NULL".
686 PH/28 An enabling patch from MH: add new function child_open_exim2() which
687 allows the sender and the authenticated sender to be set when
688 submitting a message from within Exim. Since child_open_exim() is
689 documented for local_scan(), the new function should be too.
691 PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being
692 ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that
693 results in an empty string is now treated as unset.
695 PH/30 Fix eximon buffer overflow bug (Bugzilla #73).
697 PH/31 Added sender_verify_fail logging option.
699 PH/32 In November 2003, the code in Exim that added an empty Bcc: header when
700 needed by RFC 822 but not by RFC 2822 was commented out. I have now
701 tidied the source and removed it altogether.
703 PH/33 When a queue run was abandoned because the load average was too high, a
704 log line was always written; now it is written only if the queue_run log
705 selector is set. In addition, the log line for abandonment now contains
706 information about the queue run such as the pid. This is always present
707 in "start" and "stop" lines but was omitted from the "abandon" line.
709 PH/34 Omit spaces between a header name and the colon in the error message that
710 is given when verify = headers_syntax fails (if there are lots of them,
711 the message gets confusing).
713 PH/35 Change the default for dns_check_names_pattern to allow slashes within
714 names, as there are now some PTR records that contain slashes. This check
715 is only to protect against broken name servers that fall over on strange
716 characters, so the fact that it applies to all lookups doesn't matter.
718 PH/36 Now that the new test suite is complete, we can remove some of the
719 special code in Exim that was needed for the old test suite. For example,
720 sorting DNS records because real resolvers return them in an arbitrary
721 order. The new test suite's fake resolver always returns records in the
724 PH/37 When running in the test harness, use -odi for submitted messages (e.g.
725 bounces) except when queue_only is set, to avoid logging races between
726 the different processes.
728 PH/38 Panic-die if .include specifies a non-absolute path.
730 PH/39 A tweak to the "H" retry rule from its user.
732 JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified
733 a label. They prevented compilation on older perls.
735 JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused
736 a warning to be raised on newish perls.
738 JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages
739 on queue. Changes to match documented behaviour of showing count of
740 messages matching specified criteria.
742 PH/40 Changed the default ident timeout from 30s to 5s.
744 PH/41 Added support for the use of login_cap features, on those BSD systems
745 that have them, for controlling the resources used by pipe deliveries.
747 PH/42 The content-scanning code uses fopen() to create files in which to put
748 message data. Previously it was not paying any attention to the mode of
749 the files. Exim runs with umask(0) because the rest of the code creates
750 files with open(), and sets the required mode explicitly. Thus, these
751 files were ending up world-writeable. This was not a big issue, because,
752 being within the spool directory, they were not world-accessible. I have
753 created a function called modefopen, which takes an additional mode
754 argument. It sets umask(777), creates the file, chmods it to the required
755 mode, then resets the umask. All the relevant calls to fopen() in the
756 content scanning code have been changed to use this function.
758 PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset
759 to 24 hours. This avoids potential overflow problems when processing G
760 and H retry rules. I suspect nobody ever tinkers with this value.
762 PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile.
764 PH/45 When the plaintext authenticator is running as a client, the server's
765 challenges are checked to ensure they are valid base64 strings. By
766 default, the authentication attempt is cancelled if an invalid string is
767 received. Setting client_ignore_invalid_base64 true ignores these errors.
768 The decoded challenge strings are now placed in $auth1, $auth2, etc. as
769 they are received. Thus, the responses can be made to depend on the
770 challenges. If an invalid string is ignored, an empty string is placed in
773 PH/46 Messages that are created by the autoreply transport now contains a
774 References: header, in accordance with RFCs 2822 and 3834.
776 PH/47 Added authenticated_sender_force to the smtp transport.
778 PH/48 The ${prvs expansion was broken on systems where time_t was long long.
780 PH/49 Installed latest patch from the Sieve maintainer.
782 PH/50 When an Exim quota was set without a file count quota, and mailbox_size
783 was also set, the appendfile transport was unnecessarily scanning a
784 directory of message files (e.g. for maildir delivery) to find the count
785 of files (along with the size), even though it did not need this
786 information. It now does the scan only if it needs to find either the
787 size of the count of files.
789 PH/51 Added ${time_eval: to convert Exim time strings into seconds.
791 PH/52 Two bugs concerned with error handling when the smtp transport is
794 (i) Exim was not creating retry information for temporary errors given
795 for individual recipients after the DATA command when the smtp transport
796 was used in LMTP mode. This meant that they could be retried too
797 frequently, and not timed out correctly.
799 (ii) Exim was setting the flag that allows error details to be returned
800 for LMTP errors on RCPT commands, but not for LMTP errors for individual
801 recipients that were returned after the DATA command.
803 PH/53 This is related to PH/52, but is more general: for any failing address,
804 when detailed error information was permitted to be returned to the
805 sender, but the error was temporary, then after the final timeout, only
806 "retry timeout exceeded" was returned. Now it returns the full error as
807 well as "retry timeout exceeded".
809 PH/54 Added control=allow_auth_unadvertised, as it seems there are clients that
810 do this, and (what is worse) MTAs that accept it.
812 PH/55 Added the add_header modified to ACLs. The use of "message" with "warn"
813 will now be deprecated.
815 PH/56 New os.c-cygwin from the Cygwin maintainer.
817 JJ/06 exipick: added --unsorted option to allow unsorted output in all output
818 formats (previously only available in exim formats via -bpr, -bpru,
819 and -bpra. Now also available in native and exiqgrep formats)
821 JJ/07 exipick: added --freeze and --thaw options to allow faster interaction
822 with very large, slow to parse queues
824 JJ/08 exipick: added ! as generic prefix to negate any criteria format
826 JJ/09 exipick: miscellaneous performance enhancements (~24% improvements)
828 PH/57 Tidies in SMTP dialogue display in debug output: (i) It was not showing
829 responses to authentication challenges, though it was showing the
830 challenges; (ii) I've removed the CR characters from the debug output for
833 PH/58 Allow for the insertion of a newline as well as a space when a string
834 is turned into more than one encoded-word during RFC 2047 encoding. The
835 Sieve code now uses this.
837 PH/59 Added the following errors that can be detected in retry rules: mail_4xx,
838 data_4xx, lost_connection, tls_required.
840 PH/60 When a VRFY deferred or FAILED, the log message rather than the user
841 message was being sent as an SMTP response.
843 PH/61 Add -l and -k options to exicyclog.
845 PH/62 When verifying, if an address was redirected to one new address, so that
846 verification continued, and the new address failed or deferred after
847 having set something in $address_data, the value of $address_data was not
848 passed back to the ACL. This was different to the case when no
849 redirection occurred. The value is now passed back in both cases.
851 PH/63 Changed the macro HAVE_LOGIN_CAP (see PH/41 for this release above) to
852 HAVE_SETCLASSRESOURCES because there are different APIs in use that all
853 use login_cap.h, so on its own it isn't the distinguishing feature. The
854 new name refers directly to the setclassresources() function.
856 PH/65 Added configuration files for NetBSD3.
858 PH/66 Updated OS/Makefile-HP-UX for gcc 4.1.0 with HP-UX 11.
860 PH/67 Fixed minor infelicity in the sorting of addresses to ensure that IPv6
861 is preferred over IPv4.
863 PH/68 The bounce_return_message and bounce_return_body options were not being
864 honoured for bounces generated during the reception of non-SMTP messages.
865 In particular, this applied to messages rejected by the ACL. This bug has
866 been fixed. However, if bounce_return_message is true and bounce_return_
867 body is false, the headers that are returned for a non-SMTP message
868 include only those that have been read before the error was detected.
869 (In the case of an ACL rejection, they have all been read.)
871 PH/69 The HTML version of the specification is now built in a directory called
872 spec_html instead of spec.html, because the latter looks like a path with
873 a MIME-type, and this confuses some software.
875 PH/70 Catch two compiler warnings in sieve.c.
877 PH/71 Fixed an obscure and subtle bug (thanks Alexander & Matthias). The
878 function verify_get_ident() calls ip_connect() to connect a socket, but
879 if the "connect()" function timed out, ip_connect() used to close the
880 socket. However, verify_get_ident() also closes the socket later, and in
881 between Exim writes to the log, which may get opened at this point. When
882 the socket was closed in ip_connect(), the log could get the same file
883 descriptor number as the socket. This naturally causes chaos. The fix is
884 not to close the socket in ip_connect(); the socket should be closed by
885 the function that creates it. There was only one place in the code where
886 this was missing, in the iplookup router, which I don't think anybody now
887 uses, but I've fixed it anyway.
889 PH/72 Make dns_again_means_nonexist apply to lookups using gethostbyname() as
890 well as to direct DNS lookups. Otherwise the handling of names in host
891 lists is inconsistent and therefore confusing.
897 PH/01 Two changes to the default runtime configuration:
899 (1) Move the checks for relay_from_hosts and authenticated clients from
900 after to before the (commented out) DNS black list checks.
902 (2) Add control=submission to the relay_from_hosts and authenticated
903 clients checks, on the grounds that messages accepted by these
904 statements are most likely to be submissions.
906 PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
908 (1) Generate an error if the third argument for the ${prvs expansion is
911 (2) Treat a missing third argument of ${prvscheck as if it were an empty
914 (3) Reset the variables that are obtained from the first argument of
915 ${prvscheck and used in the second argument before leaving the code,
916 because their memory is reclaimed, so using them afterwards may do
919 (4) Tidy up the code for expanding the arguments of ${prvscheck one by
920 one (it's much easier than Tom thought :-).
922 (5) Because of (4), we can now allow for the use of $prvscheck_result
923 inside the third argument.
925 PH/03 For some reason, the default setting of PATH when running a command from
926 a pipe transport was just "/usr/bin". I have changed it to
929 PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
930 anything to be listed in the output from -bV.
932 PH/05 When a filter generated an autoreply, the entire To: header line was
933 quoted in the delivery log line, like this:
935 => >A.N.Other <ano@some.domain> <original@ddress> ...
937 This has been changed so that it extracts the operative address. There
938 may be more than one such address. If so, they are comma-separated, like
941 => >ano@some.domain,ona@other.domain <original@ddress> ...
943 PH/06 When a client host used a correct literal IP address in a HELO or EHLO
944 command, (for example, EHLO [1.2.3.4]) and the client's IP address was
945 not being looked up in the rDNS to get a host name, Exim was showing the
946 IP address twice in Received: lines, even though the IP addresses were
947 identical. For example:
949 Received: from [1.2.3.4] (helo=[1.2.3.4])
951 However, if the real host name was known, it was omitting the HELO data
952 if it matched the actual IP address. This has been tidied up so that it
953 doesn't show the same IP address twice.
955 PH/07 When both +timestamp and +memory debugging was on, the value given by
956 $tod_xxx expansions could be wrong, because the tod_stamp() function was
957 called by the debug printing, thereby overwriting the timestamp buffer.
958 Debugging no longer uses the tod_stamp() function when +timestamp is set.
960 PH/08 When the original message was included in an autoreply transport, it
961 always said "this is a copy of the message, including all the headers",
962 even if body_only or headers_only was set. It now gives an appropriate
965 PH/09 Applied a patch from the Sieve maintainer which:
967 o fixes some comments
968 o adds the (disabled) notify extension core
969 o adds some debug output for the result of if/elsif tests
970 o points to the current vacation draft in the documentation
971 and documents the missing references header update
975 o fixes a bug in processing the envelope test (when testing
976 multiple envelope elements, the last element determinted the
979 PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
980 Electronic Mail") by including:
982 Auto-submitted: auto-generated
984 in the messages that it generates (bounce messages and others, such as
985 warnings). In the case of bounce messages for non-SMTP mesages, there was
986 also a typo: it was using "Auto_submitted" (underscore instead of
987 hyphen). Since every message generated by Exim is necessarily in response
988 to another message, thes have all been changed to:
990 Auto-Submitted: auto-replied
992 in accordance with these statements in the RFC:
994 The auto-replied keyword:
996 - SHOULD be used on messages sent in direct response to another
997 message by an automatic process,
999 - MUST NOT be used on manually-generated messages,
1001 - MAY be used on Delivery Status Notifications (DSNs) and Message
1002 Disposition Notifications (MDNs),
1004 - MUST NOT be used on messages generated by automatic or periodic
1005 processes, except for messages which are automatic responses to
1008 PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
1009 to the default Received: header definition.
1011 PH/12 Added log selector acl_warn_skipped (default on).
1013 PH/13 After a successful wildlsearch lookup, discard the values of numeric
1014 variables because (a) they are in the wrong storage pool and (b) even if
1015 they were copied, it wouldn't work properly because of the caching.
1017 PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
1018 checking when decoding. Apparently there are clients that generate
1019 overlong encoded strings. Why am I not surprised?
1021 PH/15 If the first argument of "${if match_address" was not empty, but did not
1022 contain an "@" character, Exim crashed. Now it writes a panic log message
1023 and treats the condition as false.
1025 PH/16 In autoreply, treat an empty string for "once" the same as unset.
1027 PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
1028 extension "envelope-auth". The code is finished and in agreement with
1029 other implementations, but there is no documentation so far and in fact,
1030 nobody wrote the draft yet. This extension is currently #undef'ed, thus
1031 not changing the active code.
1033 Print executed "if" and "elsif" statements when debugging is used. This
1034 helps a great deal to understand what a filter does.
1036 Document more things not specified clearly in RFC3028. I had all this
1037 sorted out, when out of a sudden new issues came to my mind. Oops."
1039 PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
1042 PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
1043 canonical form (as documented). However, after a host name lookup from
1044 the IP address, check_host() was doing a simple string comparison with
1045 addresses acquired from the DNS when checking that the found name did
1046 have the original IP as one of its addresses. Since any found IPv6
1047 addresses are likely to be in abbreviated form, the comparison could
1048 fail. Luckily, there already exists a function for doing the comparison
1049 by converting both addresses to binary, so now that is used instead of
1050 the text comparison.
1052 PH/20 There was another similar case to PH/19, when a complete host name was
1053 given in a host list; looking up its IP address could give an abbreviated
1054 form, whereas the current host's name might or might not be abbreviated.
1055 The same fix has been applied.
1061 PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
1062 set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
1065 PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
1066 the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
1068 PH/03 Typo: missing ".o" in src/pcre/Makefile.
1070 PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
1071 header line, restrict the check to what is listed in RFCs 2369 and 2929.
1072 Also, for "Auto-Submitted", treat anything other than "no" as
1073 non-personal, in accordance with RFC 3834. (Previously it treated
1074 anything starting "auto-" as non-personal.)
1076 TF/01 The control=submission/name=... option had a problem with syntax
1077 errors if the name included a slash character. The /name= option
1078 now slurps the rest of the string, so it can include any characters
1079 but it must come last in the list of options (after /sender_retain
1082 PH/05 Some modifications to the interface to the fake nameserver for the new
1090 TK/01 Added the "success_on_redirect" address verification option. See
1091 NewStuff for rationale and an example.
1093 PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
1095 PH/02 Patch to exigrep to allow it to work on syslog lines.
1097 PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
1098 fread() to skip over the body file's header line, because in Cygwin the
1099 header line is locked and is inaccessible.
1101 PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
1102 co-exist for some time) to make it clear that it is the Exim ID that is
1103 referenced, not the Message-ID: header line.
1105 PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
1106 string_format() function, because snprintf() does not exist on all
1109 PH/06 The use of forbid_filter_existstest now also locks out the use of the
1110 ${stat: expansion item.
1112 PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
1113 protocol synchronization error", to keep the pedants happy.
1115 PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
1116 well as for IRIX systems, when gcc is being used. See the host.c source
1119 PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
1121 PH/10 Named domain lists were not working if used in a queue_smtp_domains
1124 PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
1125 transport and to the smtp transport in LMTP mode.
1127 TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
1129 PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
1130 run a filter in a subprocess. This could lead to confusion in subsequent
1131 lookups in the parent process. There should also be a search_tidyup() at
1132 the end of the subprocess.
1134 PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
1135 only if the host matched helo_try_verify_hosts, which caused the
1136 verification to occur when the EHLO/HELO command was issued. The ACL just
1137 tested the remembered result. Now, if a previous verification attempt has
1138 not happened, "verify = helo" does it there and then.
1140 JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
1142 TK/03 Fix log output including CR from clamd.
1144 PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
1145 exist provoked a memory error which could cause a segfault.
1147 PH/15 Installed PCRE 6.2
1149 PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
1151 PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
1152 of the problem. Specifically, suggested +O2 rather than +O1 for the
1155 PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
1157 PH/20 If a delivery was routed to a non-standard port by means of an SRV
1158 record, the port was not correctly logged when the outgoing_port log
1159 selector was set (it logged the transort's default port).
1161 PH/21 Added support for host-specific ports to manualroute, queryprogram,
1162 fallback_hosts, and "hosts" in the smtp transport.
1164 PH/22 If the log selector "outgoing_port" is set, the port is now also given on
1165 host errors such as "Connection refused".
1167 PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
1168 authentication with radiusclient 0.4.9:
1170 - Error returned from rc_read_config was caught wrongly
1171 - Username/password not passed on to radius server due to wrong length.
1173 The presumption is that some radiusclient API changes for 4.51/PH/17
1174 were not taken care of correctly. The code is still untested by me (my
1175 Linux distribution still has 0.3.2 of radiusclient), but it was
1176 contributed by a Radius user.
1178 PH/24 When doing a callout, the value of $domain wasn't set correctly when
1179 expanding the "port" option of the smtp transport.
1181 TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
1182 while reading a MIME header. Thanks to Tom Hughes for a patch.
1184 PH/24 Include config.h inside local_scan.h so that configuration settings are
1187 PH/25 Make $smtp_command_argument available after all SMTP commands. This means
1188 that in an ACL for RCPT (for example), you can examine exactly what was
1191 PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
1192 commands, but it was not correctly comparing the address with the actual
1193 client host address. Thus, it would show the EHLO address in Received:
1194 header lines when this was not necessary.
1196 PH/27 Added the % operator to ${eval:}.
1198 PH/28 Exim tries to create and chdir to its spool directory when it starts;
1199 it should be ignoring failures (because with -C, for example, it has lost
1200 privilege). It wasn't ignoring creation failures other than "already
1203 PH/29 Added "crypteq" to the list of supported features that Exim outputs when
1206 PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
1207 because an input line was too long, either on its own, or by virtue of
1208 too many continuations, the temporary file was not being removed, and the
1209 return code was incorrect.
1211 PH/31 Missing "BOOL" in function definition in filtertest.c.
1213 PH/32 Applied Sieve patches from the maintainer.
1215 TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
1217 PH/33 Added "verify = not_blind".
1219 PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
1220 Local/Makefile (with some defaults set). These are used in built scripts
1221 such as exicyclog, but they have never been used in the exim_install
1222 script (though there are many overriding facilities there). I have
1223 arranged that the exim_install script now takes note of these two
1226 PH/35 Installed configuration files for Dragonfly.
1228 PH/36 When a locally submitted message by a trusted user did not contain a
1229 From: header, and the sender address was obtained from -f or from an SMTP
1230 MAIL command, and the trusted user did not use -F to supply a sender
1231 name, $originator_name was incorrectly used when constructing a From:
1232 header. Furthermore, $originator_name was used for submission mode
1233 messages from external hosts without From: headers in a similar way,
1234 which is clearly wrong.
1236 PH/37 Added control=suppress_local_fixups.
1238 PH/38 When log_selector = +received_sender was set, and the addition of the
1239 sender made the log line's construction buffer exactly full, or one byte
1240 less than full, an overflow happened when the terminating "\n" was
1243 PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
1244 when the result of a list match is failure because a DNS lookup failed.
1246 PH/40 RM_COMMAND is now used in the building process.
1248 PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
1249 the "build-* directories that it finds.
1251 PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
1252 address in a domain literal was a prefix of an interface address.
1254 PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
1255 when verifying a sender address, unless rewrite_headers is false.
1257 PH/44 Wrote a long comment about why errors_to addresses are verified as
1258 recipients, not senders.
1260 TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
1261 the ratelimit ACL was added.
1263 PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
1265 PH/46 Added extra information about PostgreSQL errors to the error string.
1267 PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
1268 avoiding the need to install special zones in a real server. This is
1269 backwards compatible; if it can't find the fake resolver, it drops back.
1270 Thus, both old and new test suites can be run.
1272 TF/02 Added util/ratelimit.pl
1274 TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
1275 clock is set back in time.
1277 TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
1278 Candler <B.Candler@pobox.com>.
1280 TF/05 The fix for PH/43 was not completely correct; widen_domains is always
1281 OK for addresses that are the result of redirections.
1283 PH/48 A number of further additions for the benefit of the new test suite,
1284 including a fake gethostbyname() that interfaces to the fake DNS resolver
1287 TF/06 The fix for widen_domains has also been applied to qualify_single and
1288 search_parents which are the other dnslookup options that can cause
1291 PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
1294 PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
1296 TF/07 Exim produced the error message "an SRV record indicated no SMTP
1297 service" if it encountered an MX record with an empty target hostname.
1298 The message is now "an MX or SRV record indicated no SMTP service".
1300 TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
1301 if the DNS of the sending site is misconfigured. This is quite a
1302 common situation. This change restores the behaviour of treating a
1303 helo verification defer as a failure.
1305 PH/51 If self=fail was set on a router, the bounce message did not include the
1306 actual error message.
1312 TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
1314 PH/01 When a transport filter timed out in a pipe delivery, and the pipe
1315 command itself ended in error, the underlying message about the transport
1316 filter timeout was being overwritten with the pipe command error. Now the
1317 underlying error message should be appended to the second error message.
1319 TK/01 Fix poll() being unavailable on Mac OSX 10.2.
1321 PH/02 Reduce the amount of output that "make" produces by default. Full output
1322 can still be requested.
1324 PH/03 The warning log line about a condition test deferring for a "warn" verb
1325 was being output only once per connection, rather than after each
1326 occurrence (because it was using the same function as for successful
1327 "warn" verbs). This seems wrong, so I have changed it.
1329 TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
1330 it should not have, which might have caused a crash in the right
1331 circumstances, but probably never did.
1333 PH/04 Installed a modified version of Tony Finch's patch to make submission
1334 mode fix the return path as well as the Sender: header line, and to
1335 add a /name= option so that you can make the user's friendly name appear
1338 TF/03 Added the control = fakedefer ACL modifier.
1340 TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
1341 Mark Lowes for thorough testing.
1343 TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
1345 TK/03 Merged latest SRS patch from Miles Wilton.
1347 PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
1348 with the definition in sysexits.h (which is #included earlier).
1349 Fortunately, Exim does not actually use EX_OK. The code used to try to
1350 preserve the sysexits.h value, by assumimg that macro definitions were
1351 scanned for macro replacements. I have been disabused of this notion,
1352 so now the code just undefines EX_OK before #including unistd.h.
1354 PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
1355 in the smtp transport. When a block could not be written in a single
1356 write() function, the timeout was being re-applied to each part-write.
1357 This seems wrong - if the receiver was accepting one byte at a time it
1358 would take for ever. The timeout is now adjusted when this happens. It
1359 doesn't have to be particularly precise.
1361 TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
1362 details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
1364 PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
1365 without a domain if the check to <postmaster@domain> fails.
1367 SC/01 Eximstats: added -xls and the ability to specify output files
1368 (patch written by Frank Heydlauf).
1370 SC/02 Eximstats: use FileHandles for outputing results.
1372 SC/03 Eximstats: allow any combination of xls, txt, and html output.
1374 SC/04 Eximstats: fixed display of large numbers with -nvr option
1376 SC/05 Eximstats: fixed merging of reports with empty tables.
1378 SC/06 Eximstats: added the -include_original_destination flag
1380 SC/07 Eximstats: removed tabs and trailing whitespace.
1382 TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
1384 TK/06 MBOX spool code: Add real "From " MBOX separator line
1385 so the .eml file is really in mbox format (even though
1386 most programs do not really care). Patch from Alex Miller.
1388 TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
1389 The latter is generated from $received_to and is only set if the
1390 message has one envelope recipient. SA can use these headers,
1391 obviously out-of-the-box. Patch from Alex Miller.
1393 PH/08 The ${def test on a variable was returning false if the variable's
1394 value was "0", contrary to what the specification has always said!
1395 The result should be true unless the variable is empty.
1397 PH/09 The syntax error of a character other than { following "${if
1398 def:variable_name" (after optional whitespace) was not being diagnosed.
1399 An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
1400 accidental colon was present, for example, could give incorrect results.
1402 PH/10 Tidied the code in a number of places where the st_size field of a stat()
1403 result is used (not including appendfile, where other changes are about
1406 PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
1407 This involved changing a lot of size variables from int to off_t. It
1408 should work with maildirs and everything.
1410 TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
1411 spamd dying while we are connected to it.
1413 TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
1416 PH/12 Applied Alex Kiernan's patch for the API change for the error callback
1417 function for BDB 4.3.
1419 PH/13 Changed auto_thaw such that it does not apply to bounce messages.
1421 PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
1422 the sources for PCRE have been re-arranged and more files are now
1425 PH/15 The code I had for printing potentially long long variables in PH/11
1426 above was not the best (it lost precision). The length of off_t variables
1427 is now inspected at build time, and an appropriate printing format (%ld
1428 or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
1429 to be "long long int" or "long int". This is needed for the internal
1430 formatting function string_vformat().
1432 PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
1433 the configuration file to be ":syslog", then the script "guesses" where
1434 the logs files are, rather than using the compiled in default. In our
1435 case the guess is not the same as the compiled default, so the script
1436 suddenly stopped working when I started to use syslog. The patch checks
1437 to see if log_file_path is "". If so, it attempts to read it from exim
1438 with no configuration file to get the compiled in version, before it
1439 falls back to the previous guessing code."
1441 TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
1442 implementing BATV in an Exim configuration. See NewStuff for the gory
1445 PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
1446 Makefile that are specific to HP-UX.
1448 PH/18 If the "use_postmaster" option was set for a recipient callout together
1449 with the "random" option, the postmaster address was used as the MAIL
1450 FROM address for the random test, but not for the subsequent recipient
1451 test. It is now used for both.
1453 PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
1454 patch removes a few documentation additions to RFC 3028, because the
1455 latest draft now contains them. It adds the new en;ascii-case comparator
1456 and a new error check for 8bit text in MIME parts. Comparator and
1457 require names are now matched exactly. I enabled the subaddress
1458 extension, but it is not well tested yet (read: it works for me)."
1460 PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
1461 rework some of the code of TK/09 above to avoid the hardwired use of
1462 "%lld" and "long long". Replaced the call to snprintf() with a call to
1465 PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
1466 records point to non-existent hosts", "retry timeout exceeded", and
1467 "retry time not reached for any host after a long failure period".
1469 PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
1470 experimental DomainKeys support:
1472 (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
1473 (2) On an error such as an illegally used "control", the wrong name for
1474 the control was given.
1476 These problems did NOT occur unless DomainKeys support was compiled.
1478 PH/23 Added daemon_startup_retries and daemon_startup_sleep.
1480 PH/24 Added ${if match_ip condition.
1482 PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
1483 databases so that it will be absolutely obvious if a crash occurs in the
1484 DB library. This is a regular occurrence (often caused by mis-matched
1487 PH/26 Insert a lot of missing (void) casts for functions such as chown(),
1488 chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
1489 picked up on a user's system that detects such things. There doesn't seem
1490 to be a gcc warning option for this - only an attribute that has to be
1491 put on the function's prototype. It seems that in Fedora Core 4 they have
1492 set this on a number of new functions. No doubt there will be more in due
1495 PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
1496 specify a transport. However, if an address that was verified by such a
1497 router was the subject of a callout, Exim crashed because it tried to
1498 read the rcpt_include_affixes from the non-existent transport. Now it
1499 just assumes that the setting of that option is false. This bug was
1500 introduced by 4.51/PH/31.
1502 PH/28 Changed -d+all to exclude +memory, because that information is very
1503 rarely of interest, but it makes the output a lot bigger. People tend to
1504 do -d+all out of habit.
1506 PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
1507 code in os-type was giving problems when libc.so lives in lib64, like on
1510 PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
1511 aren't the modern standard, and it seems that some systems' include files
1512 don't always have them. Exim was already checking for some of the newer
1513 ones like T_AAAA, and defining it itself. I've added checks for all the
1514 record types that Exim uses.
1516 PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
1517 not automatically generating a new one, as it is supposed to. This
1518 prevented TLS from working. If the file did exist, but contained invalid
1519 data, a new version was generated, as expected. It was only the case of a
1520 non-existent file that was broken.
1522 TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
1523 with a change in libdomainkeys > 0.64.
1525 TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
1526 from DNS. If the selector record carries the flag, it now has
1527 precedence over the domain-wide flag.
1529 TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
1531 PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
1532 the use of a port name that isn't defined in /etc/services) occurred, the
1533 message was deferred as in a normal delivery, and thus remained on the
1534 spool, instead of being failed because of the mua_wrapper setting. This
1535 is now fixed, and I tidied up some of the mua_wrapper messages at the
1538 SC/08 Eximstats: whilst parsing the mainlog(s), store information about
1539 the messages in a hash of arrays rather than using individual hashes.
1540 This is a bit cleaner and results in dramatic memory savings, albeit
1541 at a slight CPU cost.
1543 SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
1544 as requested by Marc Sherman.
1546 SC/10 Eximstats: added histograms for user specified patterns as requested
1549 SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
1551 PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
1552 fopen() in the content-scanning modules that did not already have it.
1558 TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
1559 doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
1561 TK/02 Fix ACL "control" statement not being available in MIME ACL.
1563 TK/03 Fix ACL "regex" condition not being available in MIME ACL.
1565 PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
1566 to test Sieve filters that use "vacation".
1568 PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
1569 that changes the way the GnuTLS parameters are stored in the cache file.
1570 The new format can be generated externally. For backward compatibility,
1571 if the data in the cache doesn't make sense, Exim assumes it has read an
1572 old-format file, and it generates new data and writes a new file. This
1573 means that you can't go back to an older release without removing the
1576 PH/03 A redirect router that has both "unseen" and "one_time" set does not
1577 work if there are any delivery delays because "one_time" forces the
1578 parent to be marked "delivered", so its unseen clone is never tried
1579 again. For this reason, Exim now forbids the simultaneous setting of
1582 PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
1583 redirected to themselves ("homonym" addresses). Read the long ChangeLog
1584 entry if you want to know the details. The fix, however, neglected to
1585 consider the case when local delivery batching is involved. The test for
1586 "previously delivered" was not happening when checking to see if an
1587 address could be batched with a previous (undelivered) one; under
1588 certain circumstances this could lead to multiple deliveries to the same
1591 PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
1592 in its include files, and this causes problems building Exim.
1594 PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
1595 header_syntax) but Exim was just ignoring anything given after a slash.
1596 In particular, this caused confusion with an attempt to use "verify =
1597 reverse_host_lookup/defer_ok". An error is now given when options are
1598 supplied for verify items that do not have them. (Maybe reverse_host_
1599 lookup should have a defer_ok option, but that's a different point.)
1601 PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
1602 defined by RFC 821) to 2048, because there were problems with some AUTH
1603 commands, and RFC 1869 says the size should be increased for extended
1604 SMTP commands that take arguments.
1606 PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
1609 PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
1610 "unknown" error; now it says that the functionality isn't in the binary.
1612 PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
1613 an address' error message when a string expansion fails (syntax or
1614 whatever). Otherwise the password may appear in the log. Following change
1615 PH/42 below, there is no longer a chance of it appearing in a bounce
1618 PH/11 Installed exipick version 20050225.0 from John Jetmore.
1620 PH/12 If the last host in a fallback_hosts list was multihomed, only the first
1621 of its addresses was ever tried. (Bugzilla bug #2.)
1623 PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
1624 the result incorrectly in the debug output. (It correctly added a newline
1625 to what was transported.)
1627 TF/01 Added $received_time.
1629 PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
1630 commented out examples of how to interface to a virus scanner and to
1631 SpamAssassin. Also added commented examples of av_scanner and
1632 spamd_address settings.
1634 PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
1635 and controls are allowed in which ACLs. There were a couple of minor
1636 errors. Some of the entries in the conditions table (which is a table of
1637 where they are NOT allowed) were getting very unwieldy; rewrote them as a
1638 negation of where the condition IS allowed.
1640 PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
1642 PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
1643 header file does not have a version number, so I've had to invent a new
1644 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
1645 API. The code is untested by me (my Linux distribution still has 0.3.2 of
1646 radiusclient), but it was contributed by a Radius user.
1648 PH/18 Installed Lars Mainka's patch for the support of CRL collections in
1649 files or directories, for OpenSSL.
1651 PH/19 When an Exim process that is running as root has to create an Exim log
1652 file, it does so in a subprocess that runs as exim:exim so as to get the
1653 ownership right at creation (otherwise, other Exim processes might see
1654 the file with the wrong ownership). There was no test for failure of this
1655 fork() call, which would lead to the process getting stuck as it waited
1656 for a non-existent subprocess. Forks do occasionally fail when resources
1657 run out. I reviewed all the other calls to fork(); they all seem to check
1660 PH/20 When checking for unexpected SMTP input at connect time (before writing
1661 the banner), Exim was not dealing correctly with a non-positive return
1662 from the read() function. If the client had disconnected by this time,
1663 the result was a log entry for a synchronization error with an empty
1664 string after "input=" when read() returned zero. If read() returned -1
1665 (an event I could not check), uninitialized data bytes were printed.
1666 There were reports of junk text (parts of files, etc) appearing after
1669 PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
1671 PH/22 Added support for macro redefinition, and (re)definition in between
1672 driver and ACL definitions.
1674 PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
1675 forgetting to use the resulting value; it was using the unexpanded value.
1677 PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
1678 hadn't been configured. The fix is from Juergen Kreileder, who
1679 understands it better than I do:
1681 "Here's what I see happening with three configured cyrus_sasl
1682 authenticators configured (plain, login, cram-md5):
1684 On startup auth_cyrus_sasl_init() gets called for each of these.
1685 This means three calls to sasl_listmech() without a specified mech_list.
1686 => SASL tests which mechs of all available mechs actually work
1687 => three warnings about OTP not working
1688 => the returned list contains: plain, login, cram-md5, digest-md5, ...
1690 With the patch, sasl_listmech() also gets called three times. But now
1691 SASL's mech_list option is set to the server_mech specified in the the
1692 authenticator. Or in other words, the answer from sasl_listmech()
1693 gets limited to just the mech you're testing for (which is different
1695 => the return list contains just 'plain' or 'login', 'cram-md5' or
1696 nothing depending on the value of ob->server_mech.
1698 I've just tested the patch: Authentication still works fine,
1699 unavailable mechs specified in the exim configuration are still
1700 caught, and the auth.log warnings about OTP are gone."
1702 PH/25 When debugging is enabled, the contents of the command line are added
1703 to the debugging output, even when log_selector=+arguments is not
1706 PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
1707 answer is "GNU", and only if the return is "GNU/something" is the answer
1710 PH/27 $acl_verify_message is now set immediately after the failure of a
1711 verification in an ACL, and so is available in subsequent modifiers. In
1712 particular, the message can be preserved by coding like this:
1714 warn !verify = sender
1715 set acl_m0 = $acl_verify_message
1717 Previously, $acl_verify_message was set only while expanding "message"
1718 and "log_message" when a very denied access.
1720 PH/28 Modified OS/os.c-Linux with
1722 -#ifndef OS_LOAD_AVERAGE
1723 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
1725 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
1726 nomenclature these days.)
1728 PH/29 Installed patch from the Sieve maintainer that adds the options
1729 sieve_useraddress and sieve_subaddress to the redirect router.
1731 PH/30 In these circumstances:
1732 . Two addresses routed to the same list of hosts;
1733 . First host does not offer TLS;
1734 . First host accepts first address;
1735 . First host gives temporary error to second address;
1736 . Second host offers TLS and a TLS session is established;
1737 . Second host accepts second address.
1738 Exim incorrectly logged both deliveries with the TLS parameters (cipher
1739 and peerdn, if requested) that were in fact used only for the second
1742 PH/31 When doing a callout as part of verifying an address, Exim was not paying
1743 attention to any local part prefix or suffix that was matched by the
1744 router that accepted the address. It now behaves in the same way as it
1745 does for delivery: the affixes are removed from the local part unless
1746 rcpt_include_affixes is set on the transport.
1748 PH/32 Add the sender address, as F=<...>, to the log line when logging a
1749 timeout during the DATA phase of an incoming message.
1751 PH/33 Sieve envelope tests were broken for match types other than :is. I have
1752 applied a patch sanctioned by the Sieve maintainer.
1754 PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
1755 the uid or gid is negative. A case of a negative gid caused this to be
1756 noticed. The fix allows for either to be negative.
1758 PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
1759 clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
1762 PH/36 The change PH/12 above was broken. Fixed it.
1764 PH/37 Exim used to check for duplicate addresses in the middle of routing, on
1765 the grounds that routing the same address twice would always produce the
1766 same answer. This might have been true once, but it is certainly no
1767 longer true now. Routing a child address may depend on the previous
1768 routing that produced that child. Some complicated redirection strategies
1769 went wrong when messages had multiple recipients, and made Exim's
1770 behaviour dependent on the order in which the addresses were given.
1772 I have moved the duplicate checking until after the routing is complete.
1773 Exim scans the addresses that are assigned to local and remote
1774 transports, and removes any duplicates. This means that more work will be
1775 done, as duplicates will always all be routed, but duplicates are
1776 presumably rare, so I don't expect this is of any significance.
1778 For deliveries to pipes, files, and autoreplies, the duplicate checking
1779 still happens during the routing process, since they are not going to be
1782 PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
1783 It corrects a timeout issue with spamd. This is Ian's comment: "The
1784 background is that sometimes spamd either never reads data from a
1785 connection it has accepted, or it never writes response data. The exiscan
1786 spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
1787 blindly assumes that writes won't block so it may never time out."
1789 PH/39 Allow G after quota size as well as K and M.
1791 PH/40 The value set for $authenticated_id in an authenticator may not contain
1792 binary zeroes or newlines because the value is written to log lines and
1793 to spool files. There was no check on this. Now the value is run through
1794 the string_printing() function so that such characters are converted to
1795 printable escape sequences.
1797 PH/41 $message_linecount is a new variable that contains the total number of
1798 lines in the message. Compare $body_linecount, which is the count for the
1801 PH/42 Exim no longer gives details of delivery errors for specific addresses in
1802 bounce and delay warning messages, except in certain special cases, which
1805 (a) An SMTP error message from a remote host;
1806 (b) A message specified in a :fail: redirection;
1807 (c) A message specified in a "fail" command in a system filter;
1808 (d) A message specified in a FAIL return from the queryprogram router;
1809 (e) A message specified by the cannot_route_message router option.
1811 In these cases only, Exim does include the error details in bounce and
1812 warning messages. There are also a few cases where bland messages such
1813 as "unrouteable address" or "local delivery error" are given.
1815 PH/43 $value is now also set for the "else" part of a ${run expansion.
1817 PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
1818 being worked on, but at least Exim now implements the latest version to
1821 PH/45 In a pipe transport, although a timeout while waiting for the pipe
1822 process to complete was treated as a delivery failure, a timeout while
1823 writing the message to the pipe was logged, but erroneously treated as a
1824 successful delivery. Such timeouts include transport filter timeouts. For
1825 consistency with the overall process timeout, these timeouts are now
1826 treated as errors, giving rise to delivery failures by default. However,
1827 there is now a new Boolean option for the pipe transport called
1828 timeout_defer, which, if set TRUE, converts the failures into defers for
1829 both kinds of timeout. A transport filter timeout is now identified in
1832 PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
1833 systems where "make" and "gmake" are different, calling "gmake" at top
1834 level broke things. I've arranged for the value of $(MAKE) to be passed
1835 from the Makefile to this script so that it can call the same version of
1839 A note about Exim versions 4.44 and 4.50
1840 ----------------------------------------
1842 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
1843 changes of various kinds. As a consequence, a big documentation update was
1844 needed. This delayed the release for rather longer than seemed good, especially
1845 in the light of a couple of (minor) security issues. Therefore, the changes
1846 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
1847 release. So 4.44 and 4.50 are in effect two different branches that both start
1850 I have left the 4.50 change log unchanged; it contains all the changes since
1851 4.43. The change log for 4.44 is below; many of its items are identical to
1852 those for 4.50. This seems to be the most sensible way to preserve the
1853 historical information.
1859 1. Minor wording change to the doc/README.SIEVE file.
1861 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
1862 computation of the current number of files was incorrect.
1864 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
1865 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
1868 4. Give more explanation in the error message when the command for a transport
1869 filter fails to execute.
1871 5. There are several places where Exim runs a non-Exim command in a
1872 subprocess. The SIGUSR1 signal should be disabled for these processes. This
1873 was being done only for the command run by the queryprogram router. It is
1874 now done for all such subprocesses. The other cases are: ${run, transport
1875 filters, and the commands run by the lmtp and pipe transports.
1877 6. Added CONFIGURE_GROUP build-time option.
1879 7. Some older OS have a limit of 256 on the maximum number of file
1880 descriptors. Exim was using setrlimit() to set 1000 as a large value
1881 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
1882 systems. I've change it so that if it can't get 1000, it tries for 256.
1884 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
1885 was an oversight, and furthermore, ever since the addition of extra
1886 controls (e.g. 4.43/32), the checks on when to allow different forms of
1887 "control" were broken. There should now be diagnostics for all cases when a
1888 control that does not make sense is encountered.
1890 9. Added the /retain_sender option to "control=submission".
1892 10. $recipients is now available in the predata ACL (oversight).
1894 11. Tidy the search cache before the fork to do a delivery from a message
1895 received from the command line. Otherwise the child will trigger a lookup
1896 failure and thereby defer the delivery if it tries to use (for example) a
1897 cached ldap connection that the parent has called unbind on.
1899 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
1900 of $address_data from the recipient verification was clobbered by the
1901 sender verification.
1903 13. The value of address_data from a sender verification is now available in
1904 $sender_address_data in subsequent conditions in the ACL statement.
1906 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
1908 15. Added a new option "connect=<time>" to callout options, to set a different
1911 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
1912 was its contents. (It was OK if the option was not defined at all.)
1914 17. A "Completed" log line is now written for messages that are removed from
1915 the spool by the -Mrm option.
1917 18. New variables $sender_verify_failure and $recipient_verify_failure contain
1918 information about exactly what failed.
1920 19. Added -dd to debug only the daemon process.
1922 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
1923 handles timeouts, both on the server side and network timeouts. Renamed the
1924 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
1926 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
1927 It is now set to "smtps".
1929 22. $host_address is now set to the target address during the checking of
1930 ignore_target_hosts.
1932 23. When checking ignore_target_hosts for an ipliteral router, no host name was
1933 being passed; this would have caused $sender_host_name to have been used if
1934 matching the list had actually called for a host name (not very likely,
1935 since this list is usually IP addresses). A host name is now passed as
1938 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
1939 code that specifies a non-restarting handler (typically sigaction() in
1940 modern systems) in an attempt to fix a rare and obscure crash bug.
1942 25. Narrowed the window for a race in the daemon that could cause it to ignore
1943 SIGCHLD signals. This is not a major problem, because they are used only to
1944 wake it up if nothing else does.
1946 26. A malformed maildirsize file could cause Exim to calculate negative values
1947 for the mailbox size or file count. Odd effects could occur as a result.
1948 The maildirsize information is now recalculated if the size or filecount
1951 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
1952 support for a long time. Removed HAVE_SYS_VFS_H.
1954 28. Installed the latest version of exipick from John Jetmore.
1956 29. In an address list, if the pattern was not a regular expression, an empty
1957 subject address (from a bounce message) matched only if the pattern was an
1958 empty string. Non-empty patterns were not even tested. This was the wrong
1959 because it is perfectly reasonable to use an empty address as part of a
1960 database query. An empty address is now tested by patterns that are
1961 lookups. However, all the other forms of pattern expect the subject to
1962 contain a local part and a domain, and therefore, for them, an empty
1963 address still always fails if the pattern is not itself empty.
1965 30. Exim went into a mad DNS loop when attempting to do a callout where the
1966 host was specified on an smtp transport, and looking it up yielded more
1967 than one IP address.
1969 31. Re-factored the code for checking spool and log partition space into a
1970 function that finds that data and another that does the check. The former
1971 is then used to implement four new variables: $spool_space, $log_space,
1972 $spool_inodes, and $log_inodes.
1974 32. The RFC2047 encoding function was originally intended for short strings
1975 such as real names; it was not keeping to the 75-character limit for
1976 encoded words that the RFC imposes. It now respects the limit, and
1977 generates multiple encoded words if necessary. To be on the safe side, I
1978 have increased the buffer size for the ${rfc2047: expansion operator from
1981 33. It is now permitted to omit both strings after an "if" condition; if the
1982 condition is true, the result is "true". As before, when the second string
1983 is omitted, a false condition yields an empty string. This makes it less
1984 cumbersome to write custom ACL and router conditions.
1986 34. Failure to deliver a bounce message always caused it to be frozen, even if
1987 there was an errors_to setting on the router. The errors_to setting is now
1990 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
1991 canonical form (fully expanded) before being placed in
1992 $sender_host_address.
1994 36. The table in the code that translates DNS record types into text (T_A to
1995 "A" for instance) was missing entries for NS and CNAME. It is just possible
1996 that this could have caused confusion if both these types were looked up
1997 for the same domain, because the text type is used as part of Exim's
1998 per-process caching. But the chance of anyone hitting this buglet seems
2001 37. The dnsdb lookup has been extended in a number of ways.
2003 (1) There is a new type, "zns", which walks up the domain tree until it
2004 finds some nameserver records. It should be used with care.
2006 (2) There is a new type, "mxh", which is like "mx" except that it returns
2007 just the host names, not the priorities.
2009 (3) It is now possible to give a list of domains (or IP addresses) to be
2010 looked up. The behaviour when one of the lookups defers can be
2011 controlled by a keyword.
2013 (4) It is now possible to specify the separator character for use when
2014 multiple records are returned.
2016 38. The dnslists ACL condition has been extended: it is now possible to supply
2017 a list of IP addresses and/or domains to be looked up in a particular DNS
2020 39. Added log_selector=+queue_time_overall.
2022 40. When running the queue in the test harness, wait just a tad after forking a
2023 delivery process, to get repeatability of debugging output.
2025 41. Include certificate and key file names in error message when GnuTLS fails
2026 to set them up, because the GnuTLS error message doesn't include the name
2027 of the failing file when there is a problem reading it.
2029 42. Allow both -bf and -bF in the same test run.
2031 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
2033 44. The "Exiscan patch" is now merged into the mainline Exim source.
2035 45. Sometimes the final signoff response after QUIT could fail to get
2036 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
2037 < 0 before doing a fflush(). This bug looks as though it goes back to the
2038 introduction of TLS in release 3.20, but "sometimes" must have been rare
2039 because the tests only now provoked it.
2041 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
2042 (this can affect the format of dates).
2044 47. exim_tidydb, when checking for the continued existence of a message for
2045 which it has found a message-specific retry record, was not finding
2046 messages that were in split spool directories. Consequently, it was
2047 deleting retry records that should have stayed in existence.
2049 48. Steve fixed some bugs in eximstats.
2051 49. The SPA authentication driver was not abandoning authentication and moving
2052 on to the next authenticator when an expansion was forced to fail,
2053 contradicting the general specification for all authenticators. Instead it
2054 was generating a temporary error. It now behaves as specified.
2056 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
2057 (the order specifies the preference for clients). The order is now AES256,
2058 AES128, 3DES, ARCFOUR128.
2060 51. Small patch to Sieve code - explicitly set From: when generating an
2063 52. Exim crashed if a remote delivery caused a very long error message to be
2064 recorded - for instance if somebody sent an entire SpamAssassin report back
2065 as a large number of 550 error lines. This bug was coincidentally fixed by
2066 increasing the size of one of Exim's internal buffers (big_buffer) that
2067 happened as part of the Exiscan merge. However, to be on the safe side, I
2068 have made the code more robust (and fixed the comments that describe what
2071 53. Now that there can be additional text after "Completed" in log lines (if
2072 the queue_time_overall log selector is set), a one-byte patch to exigrep
2073 was needed to allow it to recognize "Completed" as not the last thing in
2076 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
2077 patch that reportedly fixes this has been added. I am not expert enough to
2078 create a test for it. This is what the patch creator wrote:
2080 "I found a little strange behaviour of ldap code when working with
2081 Windows 2003 AD Domain, where users was placed in more than one
2082 Organization Units. When I tried to give exim partial DN, the exit code
2083 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
2084 But simultaneously result of request was absolutely normal ldap result,
2085 so I produce this patch..."
2087 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
2088 REFERENCE, so I have modified the code to exclude the patch when that macro
2091 55. Some experimental protocols are using DNS PTR records for new purposes. The
2092 keys for these records are domain names, not reversed IP addresses. The
2093 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
2094 leaves it alone. Component reversal etc. now happens only for IP addresses.
2097 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
2099 57. Double the size of the debug message buffer (to 2048) so that more of very
2100 long debug lines gets shown.
2102 58. The exicyclog utility now does better if the number of log files to keep
2103 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
2105 59. Two changes related to the smtp_active_hostname option:
2107 (1) $smtp_active_hostname is now available as a variable.
2108 (2) The default for smtp_banner uses $smtp_active_hostname instead
2109 of $primary_hostname.
2111 60. The host_aton() function is supposed to be passed a string that is known
2112 to be a valid IP address. However, in the case of IPv6 addresses, it was
2113 not checking this. This is a hostage to fortune. Exim now panics and dies
2114 if the condition is not met. A case was found where this could be provoked
2115 from a dnsdb PTR lookup with an IPv6 address that had more than 8
2116 components; fortuitously, this particular loophole had already been fixed
2117 by change 4.50/55 above.
2119 If there are any other similar loopholes, the new check in host_aton()
2120 itself should stop them being exploited. The report I received stated that
2121 data on the command line could provoke the exploit when Exim was running as
2122 exim, but did not say which command line option was involved. All I could
2123 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
2124 running as the user.
2127 61. There was a buffer overflow vulnerability in the SPA authentication code
2128 (which came originally from the Samba project). I have added a test to the
2129 spa_base64_to_bits() function which I hope fixes it.
2132 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
2133 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
2135 63. The daemon start-up calls getloadavg() while still root for those OS that
2136 need the first call to be done as root, but it missed one case: when
2137 deliver_queue_load_max is set with deliver_drop_privilege. This is
2138 necessary for the benefit of the queue runner, because there is no re-exec
2139 when deliver_drop_privilege is set.
2141 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
2142 This has been fixed.
2144 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
2145 was in use, was not putting the data itself into the right store pool;
2146 consequently, it could be overwritten for a subsequent message in the same
2147 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
2150 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
2152 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
2153 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
2154 the function were treating the return as a boolean value, which happened to
2155 work because 0=false and not-0=true, but is not correct code.
2157 68. The host_aton() function was not handling scoped IPv6 addresses (those
2158 with, for example, "%eth0" on the end) correctly.
2160 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
2161 negated items (that is, ~something) in unsigned ints. Some compilers
2162 apparently mutter when there is no cast.
2164 70. If an address verification called from an ACL failed, and did not produce a
2165 user-specific message (i.e. there was only a "system" message), nothing was
2166 put in $acl_verify_message. In this situation, it now puts the system
2169 71. Change 4.23/11 added synchronization checking at the start of an SMTP
2170 session; change 4.31/43 added the unwanted input to the log line - except
2171 that it did not do this in the start of session case. It now does.
2173 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
2174 This is wrong and can cause the other end to generate a synchronization
2175 error if it is another Exim or anything else that does the synchronization
2176 check. A QUIT command is no longer sent after a timeout.
2178 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
2179 during host lookups.
2181 74. The defer_ok option of callout verification was not working if it was used
2182 when verifying addresses in header lines, that is, for this case:
2184 verify = header_sender/callout=defer_ok
2186 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
2187 those file descriptors could be used for SMTP connections. If anything
2188 wrote to stderr (the example that came up was "warn" in embedded Perl), it
2189 could be sent to the SMTP client, causing chaos. The daemon now opens
2190 stdin, stdout, and stderr to /dev/null when it puts itself into the
2193 76. Arrange for output from Perl's "warn" command to be written to Exim's main
2194 log by default. The user can override this with suitable Perl magic.
2196 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
2197 the log message when discard triggers, was not working for the DATA ACL or
2198 for the non-SMTP ACL.
2200 78. Error message wording change in sieve.c.
2202 79. If smtp_accept_max_per_host was set, the number of connections could be
2203 restricted to fewer than expected, because the daemon was trying to set up
2204 a new connection before checking whether the processes handling previous
2205 connections had finished. The check for completed processes is now done
2206 earlier. On busy systems, this bug wouldn't be noticed because something
2207 else would have woken the daemon, and it would have reaped the completed
2210 80. If a message was submitted locally by a user whose login name contained one
2211 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
2212 It caused a spool format error. I have fixed the spool reading code. A
2213 related problem was that the "from" clause in the Received: line became
2214 illegal because of the space(s). It is now covered by ${quote_local_part.
2216 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
2219 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
2221 83. Patch from Sieve maintainer to fix unterminated string problem in
2222 "vacation" handling.
2224 84. Some minor changes to the Linux configuration files to help with other
2225 OS variants using glibc.
2227 85. One more patch for Sieve to update vacation handling to latest spec.
2230 ----------------------------------------------------
2231 See the note above about the 4.44 and 4.50 releases.
2232 ----------------------------------------------------
2238 1. Change 4.43/35 introduced a bug that caused file counts to be
2239 incorrectly computed when quota_filecount was set in an appendfile
2242 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
2243 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
2246 3. Give more explanation in the error message when the command for a transport
2247 filter fails to execute.
2249 4. There are several places where Exim runs a non-Exim command in a
2250 subprocess. The SIGUSR1 signal should be disabled for these processes. This
2251 was being done only for the command run by the queryprogram router. It is
2252 now done for all such subprocesses. The other cases are: ${run, transport
2253 filters, and the commands run by the lmtp and pipe transports.
2255 5. Some older OS have a limit of 256 on the maximum number of file
2256 descriptors. Exim was using setrlimit() to set 1000 as a large value
2257 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
2258 systems. I've change it so that if it can't get 1000, it tries for 256.
2260 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
2261 was an oversight, and furthermore, ever since the addition of extra
2262 controls (e.g. 4.43/32), the checks on when to allow different forms of
2263 "control" were broken. There should now be diagnostics for all cases when a
2264 control that does not make sense is encountered.
2266 7. $recipients is now available in the predata ACL (oversight).
2268 8. Tidy the search cache before the fork to do a delivery from a message
2269 received from the command line. Otherwise the child will trigger a lookup
2270 failure and thereby defer the delivery if it tries to use (for example) a
2271 cached ldap connection that the parent has called unbind on.
2273 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
2274 of $address_data from the recipient verification was clobbered by the
2275 sender verification.
2277 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
2278 was its contents. (It was OK if the option was not defined at all.)
2280 11. A "Completed" log line is now written for messages that are removed from
2281 the spool by the -Mrm option.
2283 12. $host_address is now set to the target address during the checking of
2284 ignore_target_hosts.
2286 13. When checking ignore_target_hosts for an ipliteral router, no host name was
2287 being passed; this would have caused $sender_host_name to have been used if
2288 matching the list had actually called for a host name (not very likely,
2289 since this list is usually IP addresses). A host name is now passed as
2292 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
2293 code that specifies a non-restarting handler (typically sigaction() in
2294 modern systems) in an attempt to fix a rare and obscure crash bug.
2296 15. Narrowed the window for a race in the daemon that could cause it to ignore
2297 SIGCHLD signals. This is not a major problem, because they are used only to
2298 wake it up if nothing else does.
2300 16. A malformed maildirsize file could cause Exim to calculate negative values
2301 for the mailbox size or file count. Odd effects could occur as a result.
2302 The maildirsize information is now recalculated if the size or filecount
2305 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
2306 support for a long time. Removed HAVE_SYS_VFS_H.
2308 18. Updated exipick to current release from John Jetmore.
2310 19. Allow an empty sender to be matched against a lookup in an address list.
2311 Previously the only cases considered were a regular expression, or an
2314 20. Exim went into a mad DNS lookup loop when doing a callout where the
2315 host was specified on the transport, if the DNS lookup yielded more than
2318 21. The RFC2047 encoding function was originally intended for short strings
2319 such as real names; it was not keeping to the 75-character limit for
2320 encoded words that the RFC imposes. It now respects the limit, and
2321 generates multiple encoded words if necessary. To be on the safe side, I
2322 have increased the buffer size for the ${rfc2047: expansion operator from
2325 22. Failure to deliver a bounce message always caused it to be frozen, even if
2326 there was an errors_to setting on the router. The errors_to setting is now
2329 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
2330 canonical form (fully expanded) before being placed in
2331 $sender_host_address.
2333 24. Updated eximstats to version 1.33
2335 25. Include certificate and key file names in error message when GnuTLS fails
2336 to set them up, because the GnuTLS error message doesn't include the name
2337 of the failing file when there is a problem reading it.
2339 26. Expand error message when OpenSSL has problems setting up cert/key files.
2342 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
2343 (this can affect the format of dates).
2345 28. exim_tidydb, when checking for the continued existence of a message for
2346 which it has found a message-specific retry record, was not finding
2347 messages that were in split spool directories. Consequently, it was
2348 deleting retry records that should have stayed in existence.
2350 29. eximstats updated to version 1.35
2351 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
2352 1.35 - bugfix such that pie charts by volume are generated correctly
2354 30. The SPA authentication driver was not abandoning authentication and moving
2355 on to the next authenticator when an expansion was forced to fail,
2356 contradicting the general specification for all authenticators. Instead it
2357 was generating a temporary error. It now behaves as specified.
2359 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
2360 (the order specifies the preference for clients). The order is now AES256,
2361 AES128, 3DES, ARCFOUR128.
2363 31. Small patch to Sieve code - explicitly set From: when generating an
2366 32. Exim crashed if a remote delivery caused a very long error message to be
2367 recorded - for instance if somebody sent an entire SpamAssassin report back
2368 as a large number of 550 error lines. This bug was coincidentally fixed by
2369 increasing the size of one of Exim's internal buffers (big_buffer) that
2370 happened as part of the Exiscan merge. However, to be on the safe side, I
2371 have made the code more robust (and fixed the comments that describe what
2374 33. Some experimental protocols are using DNS PTR records for new purposes. The
2375 keys for these records are domain names, not reversed IP addresses. The
2376 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
2377 leaves it alone. Component reversal etc. now happens only for IP addresses.
2380 34. The host_aton() function is supposed to be passed a string that is known
2381 to be a valid IP address. However, in the case of IPv6 addresses, it was
2382 not checking this. This is a hostage to fortune. Exim now panics and dies
2383 if the condition is not met. A case was found where this could be provoked
2384 from a dnsdb PTR lookup with an IPv6 address that had more than 8
2385 components; fortuitously, this particular loophole had already been fixed
2386 by change 4.50/55 or 4.44/33 above.
2388 If there are any other similar loopholes, the new check in host_aton()
2389 itself should stop them being exploited. The report I received stated that
2390 data on the command line could provoke the exploit when Exim was running as
2391 exim, but did not say which command line option was involved. All I could
2392 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
2393 running as the user.
2396 35. There was a buffer overflow vulnerability in the SPA authentication code
2397 (which came originally from the Samba project). I have added a test to the
2398 spa_base64_to_bits() function which I hope fixes it.
2401 36. The daemon start-up calls getloadavg() while still root for those OS that
2402 need the first call to be done as root, but it missed one case: when
2403 deliver_queue_load_max is set with deliver_drop_privilege. This is
2404 necessary for the benefit of the queue runner, because there is no re-exec
2405 when deliver_drop_privilege is set.
2407 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
2408 was in use, was not putting the data itself into the right store pool;
2409 consequently, it could be overwritten for a subsequent message in the same
2410 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
2413 38. Sometimes the final signoff response after QUIT could fail to get
2414 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
2415 < 0 before doing a fflush(). This bug looks as though it goes back to the
2416 introduction of TLS in release 3.20, but "sometimes" must have been rare
2417 because the tests only now provoked it.
2423 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
2424 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
2425 Now it returns an integer. A number of calls were still expecting a T/F
2426 return. Fortuitously, in all cases, the tests worked in OK situations,
2427 which is the norm. However, things would have gone wrong on any write
2428 failures on the smtp file descriptor. This function is used when sending
2429 messages over SMTP and also when doing verify callouts.
2431 2. When Exim is called to do synchronous delivery of a locally submitted
2432 message (the -odf or -odi options), it no longer closes stderr before doing
2435 3. Implemented the mua_wrapper option.
2437 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
2439 5. Implemented the functions header_remove(), header_testname(),
2440 header_add_at_position(), and receive_remove_recipient(), and exported them
2443 6. If an ACL "warn" statement specified the addition of headers, Exim already
2444 inserted X-ACL-Warn: at the start if there was no header name. However, it
2445 was not making this test for the second and subsequent header lines if
2446 there were newlines in the string. This meant that an invalid header could
2447 be inserted if Exim was badly configured.
2449 7. Allow an ACL "warn" statement to add header lines at the start or after all
2450 the Received: headers, as well as at the end.
2452 8. Added the rcpt_4xx retry error code.
2454 9. Added postmaster_mailfrom=xxx to callout verification option.
2456 10. Added mailfrom=xxxx to the callout verification option, for verify=
2459 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
2460 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
2462 12. Inserted some casts to stop certain compilers warning when using pointer
2463 differences as field lengths or precisions in printf-type calls (mostly
2464 affecting debugging statements).
2466 13. Added optional readline() support for -be (dynamically loaded).
2468 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
2469 same clock tick as a message's arrival, so that its received time was the
2470 same as the "first fail" time on the retry record, and that message
2471 remained on the queue past the ultimate address timeout, every queue runner
2472 would try a delivery (because it was past the ultimate address timeout) but
2473 after another failure, the ultimate address timeout, which should have then
2474 bounced the address, did not kick in. This was a "< instead of <=" error;
2475 in most cases the first failure would have been in the next clock tick
2476 after the received time, and all would be well.
2478 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
2479 being recognized when the domain list was tested by the match_domain
2480 condition in an expansion string.
2482 16. Added the ${str2b64: operator.
2484 17. Exim was always calling setrlimit() to set a large limit for the number of
2485 processes, without checking whether the existing limit was already
2486 adequate. (It did check for the limit on file descriptors.) Furthermore,
2487 errors from getrlimit() and setrlimit() were being ignored. Now they are
2488 logged to the main and panic logs, but Exim does carry on, to try to do its
2489 job under whatever limits there are.
2491 18. Imported PCRE 5.0.
2493 19. Trivial typo in log message " temporarily refused connection" (the leading
2496 20. If the log selector return_path_on_delivery was set and an address was
2497 redirected to /dev/null, the delivery process crashed because it assumed
2498 that a return path would always be set for a "successful" delivery. In this
2499 case, the whole delivery is bypassed as an optimization, and therefore no
2502 21. Internal re-arrangement: the function for sending a challenge and reading
2503 a response while authentication was assuming a zero-terminated challenge
2504 string. It's now changed to take a pointer and a length, to allow for
2505 binary data in such strings.
2507 22. Added the cyrus_sasl authenticator (code supplied by MBM).
2509 23. Exim was not respecting finduser_retries when seeking the login of the
2510 uid under which it was called; it was always trying 10 times. (The default
2511 setting of finduser_retries is zero.) Also, it was sleeping after the final
2512 failure, which is pointless.
2514 24. Implemented tls_on_connect_ports.
2516 25. Implemented acl_smtp_predata.
2518 26. If the domain in control=submission is set empty, Exim assumes that the
2519 authenticated id is a complete email address when it generates From: or
2520 Sender: header lines.
2522 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
2523 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
2524 chown and chgrp in /bin and hostname in /usr/bin.
2526 28. Exim was keeping the "process log" file open after each use, just as it
2527 does for the main log. This opens the possibility of it remaining open for
2528 long periods when the USR1 signal hits a daemon. Occasional processlog
2529 errors were reported, that could have been caused by this. Anyway, it seems
2530 much more sensible not to leave this file open at all, so that is what now
2533 29. The long-running daemon process does not normally write to the log once it
2534 has entered its main loop, and it closes the log before doing so. This is
2535 so that log files can straightforwardly be renamed and moved. However,
2536 there are a couple of unusual error situations where the daemon does write
2537 log entries, and I had neglected to close the log afterwards.
2539 30. The text of an SMTP error response that was received during a remote
2540 delivery was being truncated at 512 bytes. This is too short for some of
2541 the long messages that one sometimes sees. I've increased the limit to
2544 31. It is now possible to make retry rules that apply only when a message has a
2545 specific sender, in particular, an empty sender.
2547 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
2548 it possible to be selective about when SMTP synchronization is enforced.
2550 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
2552 32. Implemented hosts_connection_nolog.
2554 33. Added an ACL for QUIT.
2556 34. Setting "delay_warning=" to disable warnings was not working; it gave a
2559 35. Added mailbox_size and mailbox_filecount to appendfile.
2561 36. Added control = no_multiline_responses to ACLs.
2563 37. There was a bug in the logic of the code that waits for the clock to tick
2564 in the case where the clock went backwards by a substantial amount such
2565 that the microsecond fraction of "now" was more than the microsecond
2566 fraction of "then" (but the whole seconds number was less).
2568 38. Added support for the libradius Radius client library this is found on
2569 FreeBSD (previously only the radiusclient library was supported).
2575 1. When certain lookups returned multiple values in the form name=value, the
2576 quoting of the values was not always being done properly. Specifically:
2577 (a) If the value started with a double quote, but contained no whitespace,
2579 (b) If the value contained whitespace other than a space character (i.e.
2580 tabs or newlines or carriage returns) it was not quoted.
2581 This fix has been applied to the mysql and pgsql lookups by writing a
2582 separate quoting function and calling it from the lookup code. The fix
2583 should probably also be applied to nisplus, ibase and oracle lookups, but
2584 since I cannot test any of those, I have not disturbed their existing code.
2586 2. A hit in the callout cache for a specific address caused a log line with no
2587 reason for rejecting RCPT. Now it says "Previous (cached) callout
2588 verification failure".
2590 3. There was an off-by-one bug in the queryprogram router. An over-long
2591 return line was truncated at 256 instead of 255 characters, thereby
2592 overflowing its buffer with the terminating zero. As well as fixing this, I
2593 have increased the buffer size to 1024 (and made a note to document this).
2595 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
2596 when Exim is waiting for an SMTP response from a remote server, Exim
2597 restarts its select() call on the socket, thereby resetting its timeout.
2598 This is not a problem when such interrupts are rare. Somebody set up a cron
2599 job to run exiwhat every 2 minutes, which is less than the normal select()
2600 timeout (5 or 10 minutes). This meant that the select() timeout never
2601 kicked in because it was always reset. I have fixed this by comparing the
2602 time when an interrupt arrives with the time at the start of the first call
2603 to select(). If more time than the timeout has elapsed, the interrupt is
2604 treated as a timeout.
2606 5. Some internal re-factoring in preparation for the addition of Sieve
2607 extensions (by MH). In particular, the "personal" test is moved to a
2608 separate function, and given an option for scanning Cc: and Bcc: (which is
2609 not set for Exim filters).
2611 6. When Exim created an email address using the login of the caller as the
2612 local part (e.g. when creating a From: or Sender: header line), it was not
2613 quoting the local part when it contained special characters such as @.
2615 7. Installed new OpenBSD configuration files.
2617 8. Reworded some messages for syntax errors in "and" and "or" conditions to
2618 try to make them clearer.
2620 9. Callout options, other than the timeout value, were being ignored when
2621 verifying sender addresses in header lines. For example, when using
2623 verify = header_sender/callout=no_cache
2625 the cache was (incorrectly) being used.
2627 10. Added a missing instance of ${EXE} to the exim_install script; this affects
2628 only the Cygwin environment.
2630 11. When return_path_on_delivery was set as a log selector, if different remote
2631 addresses in the same message used different return paths and parallel
2632 remote delivery occurred, the wrong values would sometimes be logged.
2633 (Whenever a remote delivery process finished, the return path value from
2634 the most recently started remote delivery process was logged.)
2636 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
2637 lines when AUTH and/or TLS are in use. This is the "received protocol"
2638 field. Exim used to use "asmtp" for authenticated SMTP, without any
2639 indication (in the protocol name) for TLS use. Now it follows the RFC and
2640 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
2641 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
2642 names appear in log lines as well as in Received: header lines.
2644 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
2645 extensions, and comparison tests, and to fix some bugs.
2647 14. Changes to the "personal" filter test:
2649 (1) The test was buggy in that it was just doing the equivalent of
2650 "contains" tests on header lines. For example, if a user's address was
2651 anne@some.where, the "personal" test would incorrectly be true for
2653 To: susanne@some.where
2655 This test is now done by extracting each address from the header in turn,
2656 and checking the entire address. Other tests that are part of "personal"
2657 are now done using regular expressions (for example, to check local parts
2658 of addresses in From: header lines).
2660 (2) The list of non-personal local parts in From: addresses has been
2661 extended to include "listserv", "majordomo", "*-request", and "owner-*",
2662 taken from the Sieve specification recommendations.
2664 (3) If the message contains any header line starting with "List-" it is
2665 treated as non-personal.
2667 (4) The test for "circular" in the Subject: header line has been removed
2668 because it now seems ill-conceived.
2670 15. Minor typos in src/EDITME comments corrected.
2672 16. Installed latest exipick from John Jetmore.
2674 17. If headers_add on a router specified a text string that was too long for
2675 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
2676 of string_sprintf() is now avoided.
2678 18. $message_body_size was not set (it was always zero) when running the DATA
2679 ACL and the local_scan() function.
2681 19. For the "mail" command in an Exim filter, no default was being set for
2682 the once_repeat time, causing a random time value to be used if "once" was
2683 specified. (If the value happened to be <= 0, no repeat happened.) The
2684 default is now 0s, meaning "never repeat". The "vacation" command was OK
2685 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
2686 (I found it when inspecting the code).
2688 20. There is now an overall timeout for performing a callout verification. It
2689 defaults to 4 times the callout timeout, which applies to individual SMTP
2690 commands during the callout. The overall timeout applies when there is more
2691 than one host that can be tried. The timeout is checked before trying the
2692 next host. This prevents very long delays if there are a large number of
2693 hosts and all are timing out (e.g. when the network connections are timing
2694 out). The value of the overall timeout can be changed by specifying an
2695 additional sub-option for "callout", called "maxwait". For example:
2697 verify = sender/callout=5s,maxwait=20s
2699 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
2700 to the end before writing, but this should make it even safer).
2702 22. Exim was forgetting that it had advertised PIPELINING for the second and
2703 subsequent messages on an SMTP connection. It was also not resetting its
2704 memory on STARTTLS and an internal HELO.
2706 23. When Exim logs an SMTP synchronization error within a session, it now
2707 records whether PIPELINING has been advertised or not.
2709 24. Added 3 instances of "(long int)" casts to time_t variables that were being
2710 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
2711 rather than long int.
2713 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
2715 26. Added the never_mail option to autoreply.
2721 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
2722 crash if the getsockname() call failed; this can happen if a connection is
2723 closed very soon after it is established. The problem was simply in the
2724 order in which certain operations were done, causing Exim to try to write
2725 to the SMTP stream before it had set up the file descriptor. The bug has
2726 been fixed by making things happen in the correct order.
2732 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
2733 before the connection was closed, thus losing the rejection response.
2735 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
2736 some early Solaris releases, but causes trouble in current releases where
2737 socklen_t is defined.
2739 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
2742 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
2745 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
2746 that releasing the top of it at the end releases what was used for sub-
2747 expansions (unless the block got too big). However, discard this block if
2748 the first thing is a variable or header, so that we can use its block when
2749 it is dynamic (useful for very large $message_headers, for example).
2751 6. Lookups now cache *every* query, not just the most recent. A new, separate
2752 store pool is used for this. It can be recovered when all lookup caches are
2753 flushed. Lookups now release memory at the end of their result strings.
2754 This has involved some general refactoring of the lookup sources.
2756 7. Some code has been added to the store_xxx() functions to reduce the amount
2757 of flapping under certain conditions.
2759 8. log_incoming_interface used to affect only the <= reception log lines. Now
2760 it causes the local interface and port to be added to several more SMTP log
2761 lines, for example "SMTP connection from", and rejection lines.
2763 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
2765 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
2767 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
2768 could be overwritten at the end of the current message (or the start of a
2769 new message if it was set in a HELO ACL). The value is now preserved for
2770 the duration of the SMTP connection.
2772 12. If a transport had a headers_rewrite setting, and a matching header line
2773 contained an unqualified address, that address was qualified, even if it
2774 did not match any rewriting rules. The underlying bug was that the values
2775 of the flags that permit the existence of unqualified sender and recipient
2776 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
2777 non-local messages, and by -bnq for local messages) were not being
2778 preserved with the message after it was received.
2780 13. When Exim was logging an SMTP synchronization error, it could sometimes log
2781 "next input=" as part of the text comprising the host identity instead of
2782 the correct text. The code was using the same buffer for two different
2783 strings. However, depending on which order the printing function evaluated
2784 its arguments, the bug did not always show up. Under Linux, for example, my
2785 test suite worked just fine.
2787 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
2788 doesn't work with some older versions of Perl. It has been changed to "my",
2789 which in any case is probably the better facility to use.
2791 15. A really picky compiler found some instances of statements for creating
2792 error messages that either had too many or two few arguments for the format
2795 16. The size of the buffer for calls to the DNS resolver has been increased
2796 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
2797 for addresses that have a lot of PTR records. This alleviates a problem; it
2798 does not fully solve it.
2800 17. A dnsdb lookup for PTR records that receives more data than will fit in the
2801 buffer now truncates the list and logs the incident, which is the same
2802 action as happens when Exim is looking up a host name and its aliases.
2803 Previously in this situation something unpredictable would happen;
2804 sometimes it was "internal error: store_reset failed".
2806 18. If a server dropped the connection unexpectedly when an Exim client was
2807 using GnuTLS and trying to read a response, the client delivery process
2808 crashed while trying to generate an error log message.
2810 19. If a "warn" verb in an ACL added multiple headers to a message in a single
2811 string, for example:
2813 warn message = H1: something\nH2: something
2815 the text was added as a single header line from Exim's point of view
2816 though it ended up OK in the delivered message. However, searching for the
2817 second and subsequent header lines using $h_h2: did not work. This has been
2818 fixed. Similarly, if a system filter added multiple headers in this way,
2819 the routers could not see them.
2821 20. Expanded the error message when iplsearch is called with an invalid key to
2822 suggest using net-iplsearch in a host list.
2824 21. When running tests using -bh, any delays imposed by "delay" modifiers in
2825 ACLs are no longer actually imposed (and a message to that effect is
2828 22. If a "gecos" field in a passwd entry contained escaped characters, in
2829 particular, if it contained a \" sequence, Exim got it wrong when building
2830 a From: or a Sender: header from that name. A second bug also caused
2831 incorrect handling when an unquoted " was present following a character
2832 that needed quoting.
2834 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
2835 was not being matched caselessly.
2837 24. Arranged for all hyphens in the exim.8 source to be escaped with
2840 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
2841 properly. Recipient callout cache records were still being keyed to include
2842 the sender, even when use_sender was set false. This led to far more
2843 callouts that were necessary. The sender is no longer included in the key
2844 when use_sender is false.
2846 26. Added "control = submission" modifier to ACLs.
2848 27. Added the ${base62d: operator to decode base 62 numbers.
2850 28. dnsdb lookups can now access SRV records.
2852 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
2853 the configuration file.
2855 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
2856 (-v) mode. This makes the output for a verbose queue run more intelligible.
2858 31. Added a use_postmaster feature to recipient callouts.
2860 32. Added the $body_zerocount variable, containing the number of binary zero
2861 bytes in the message body.
2863 33. The time of last modification of the "new" subdirectory is now used as the
2864 "mailbox time last read" when there is a quota error for a maildir
2867 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
2869 35. Added +ignore_unknown as a special item in host lists.
2871 36. Code for decoding IPv6 addresses in host lists is now included, even if
2872 IPv6 support is not being compiled. This fixes a bug in which an IPv6
2873 address was recognized as an IP address, but was then not correctly decoded
2874 into binary, causing unexpected and incorrect effects when compared with
2881 1. Very minor rewording of debugging text in manualroute to say "list of
2882 hosts" instead of "hostlist".
2884 2. If verify=header_syntax was set, and a header line with an unqualified
2885 address (no domain) and a large number of spaces between the end of the
2886 name and the colon was received, the reception process suffered a buffer
2887 overflow, and (when I tested it) crashed. This was caused by some obsolete
2888 code that should have been removed. The fix is to remove it!
2890 3. When running in the test harness, delay a bit after writing a bounce
2891 message to get a bit more predictability in the log output.
2893 4. Added a call to search_tidyup() just before forking a reception process. In
2894 theory, someone could use a lookup in the expansion of smtp_accept_max_
2895 per_host which, without the tidyup, could leave open a database connection.
2897 5. Added the variables $recipient_data and $sender_data which get set from a
2898 lookup success in an ACL "recipients" or "senders" condition, or a router
2899 "senders" option, similar to $domain_data and $local_part_data.
2901 6. Moved the writing of debug_print from before to after the "senders" test
2904 7. Change 4.31/66 (moving the time when the Received: is generated) caused
2905 problems for message scanning, either using a data ACL, or using
2906 local_scan() because the Received: header was not generated till after they
2907 were called (in order to set the time as the time of reception completion).
2908 I have revised the way this works. The header is now generated after the
2909 body is received, but before the ACL or local_scan() are called. After they
2910 are run, the timestamp in the header is updated.
2916 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
2917 before starting a queue runner without re-exec. This happened only when
2918 deliver_drop_privilege was set or when the Exim user was set to root. The
2919 effect of the bug was that timeouts during subsequent deliveries caused
2920 crashes instead of being properly handled. The handler is now left at its
2921 default (and expected) setting.
2923 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
2924 message, again when deliver_drop_privilege is set or Exim is run as root.
2925 The bug described in (1) was not present in this case, but the tidying up
2926 of the other signals was missing. I have made the two cases consistent.
2928 3. The ignore_target_hosts setting on a manualroute router was being ignored
2929 for hosts that were looked up using the /MX notation.
2931 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
2934 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
2935 operated on the sender address. After changing the $sender_address to <>
2936 for the sender address verify, Exim was re-instated it as the original
2937 (before rewriting) address, but remembering that it had rewritten it, so it
2938 wasn't rewriting it again. This bug also had the effect of breaking the
2939 sender address verification caching when the sender address was rewritten.
2941 6. The ignore_target_hosts option was being ignored by the ipliteral router.
2942 This has been changed so that if the ip literal address matches
2943 ignore_target_hosts, the router declines.
2945 7. Added expansion conditions match_domain, match_address, and match_local_
2946 part (NOT match_host).
2948 8. The placeholder for the Received: header didn't have a length field set.
2950 9. Added code to Exim itself and to exim_lock to test for a specific race
2951 condition that could lead to file corruption when using MBX delivery. The
2952 issue is with the lockfile that is created in /tmp. If this file is removed
2953 after a process has opened it but before that process has acquired a lock,
2954 there is the potential for a second process to recreate the file and also
2955 acquire a lock. This could lead to two Exim processes writing to the file
2956 at the same time. The added code performs the same test as UW imapd; it
2957 checks after acquiring the lock that its file descriptor still refers to
2958 the same named file.
2960 10. The buffer for building added header lines was of fixed size, 8192 bytes.
2961 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
2964 11. Added the smtp_active_hostname option. If used, this will typically be made
2965 to depend on the incoming interface address. Because $interface_address is
2966 not set up until the daemon has forked a reception process, error responses
2967 that can happen earlier (such as "too many connections") no longer contain
2970 12. If an expansion in a condition on a "warn" statement fails because a lookup
2971 defers, the "warn" statement is abandoned, and the next ACL statement is
2972 processed. Previously this caused the whole ACL to be aborted.
2974 13. Added the iplsearch lookup type.
2976 14. Added ident_timeout as a log selector.
2978 15. Added tls_certificate_verified as a log selector.
2980 16. Added a global option tls_require_ciphers (compare the smtp transport
2981 option of the same name). This controls incoming TLS connections.
2983 17. I finally figured out how to make tls_require_ciphers do a similar thing
2984 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
2985 before starting the TLS session.
2987 18. Tabs are now shown as \t in -bP output.
2989 19. If the log selector return_path_on_delivery was set, Exim crashed when
2990 bouncing a message because it had too many Received: header lines.
2992 20. If two routers both had headers_remove settings, and the first one included
2993 a superfluous trailing colon, the final name in the first list and the
2994 first name in the second list were incorrectly joined into one item (with a
2995 colon in the middle).
3001 1. Added -C and -D options to the exinext utility, mainly to make it easier
3002 to include in the automated testing, but these could be helpful when
3003 multiple configurations are in use.
3005 2. The exinext utility was not formatting the output nicely when there was
3006 an alternate port involved in the retry record key, nor when there was a
3007 message id as well (for retries that were specific to a specific message
3008 and a specific host). It was also confused by IPv6 addresses, because of
3009 the additional colons they contain. I have fixed the IPv4 problem, and
3010 patched it up to do a reasonable job for IPv6.
3012 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
3013 delivery, the log line now contains "pipelined" if PIPELINING was used.
3015 4. An SMTP transport process used to panic and die if the bind() call to set
3016 an explicit outgoing interface failed. This has been changed; it is now
3017 treated in the same way as a connect() failure.
3019 5. A reference to $sender_host_name in the part of a conditional expansion
3020 that was being skipped was still causing a DNS lookup. This no longer
3023 6. The def: expansion condition was not recognizing references to header lines
3024 that used bh_ and bheader_.
3026 7. Added the _cache feature to named lists.
3028 8. The code for checking quota_filecount in the appendfile transport was
3029 allowing one more file than it should have been.
3031 9. For compatibility with Sendmail, the command line option
3039 and sets the incoming protocol and host name (for trusted callers). The
3040 host name and its colon can be omitted when only the protocol is to be set.
3041 Note the Exim already has two private options, -pd and -ps, that refer to
3042 embedded Perl. It is therefore impossible to set a protocol value of "d" or
3043 "s", but I don't think that's a major issue.
3045 10. A number of refactoring changes to the code, none of which should affect
3048 (a) The number of logging options was getting close to filling up the
3049 32-bit word that was used as a bit map. I have split them into two classes:
3050 those that are passed in the argument to log_write(), and those that are
3051 only ever tested independently outside of that function. These are now in
3052 separate 32-bit words, so there is plenty of room for expansion again.
3053 There is no change in the user interface or the logging behaviour.
3055 (b) When building, for example, log lines, the code previously used a
3056 macro that called string_cat() twice, in order to add two strings. This is
3057 not really sufficiently general. Furthermore, there was one instance where
3058 it was actually wrong because one of the argument was used twice, and in
3059 one call a function was used. (As it happened, calling the function twice
3060 did not affect the overall behaviour.) The macro has been replaced by a
3061 function that can join an arbitrary number of extra strings onto a growing
3064 (c) The code for expansion conditions now uses a table and a binary chop
3065 instead of a serial search (which was left over from when there were very
3066 few conditions). Also, it now recognizes conditions like "pam" even when
3067 the relevant support is not compiled in: a suitably worded error message is
3068 given if an attempt is made to use such a condition.
3070 11. Added ${time_interval:xxxxx}.
3072 12. A bug was causing one of the ddress fields not to be passed back correctly
3073 from remote delivery subprocesses. The field in question was not being
3074 subsequently used, so this caused to problems in practice.
3076 13. Added new log selectors queue_time and deliver_time.
3078 14. Might have fixed a bug in maildirsizefile handling that threw up
3079 "unexpected character" debug warnings, and recalculated the data
3080 unnecessarily. In any case, I expanded the warning message to give more
3083 15. Added the message "Restricted characters in address" to the statements in
3084 the default ACL that block characters like @ and % in local parts.
3086 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
3087 Three changes have been made:
3089 (a) There was a serious bug; a negative response to MAIL caused the whole
3090 recipient domain to be cached as invalid, thereby blocking all messages
3091 to all local parts at the same domain, from all senders. This bug has
3092 been fixed. The domain is no longer cached after a negative response to
3093 MAIL if the sender used is not empty.
3095 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
3098 (c) A new callout option, "use_sender" has been added for people who want
3099 the modified behaviour.
3105 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
3108 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
3109 indeed breaks things for older releases.
3111 3. Added additional logging to the case where there is a problem reading data
3112 from a filter that is running in a subprocess using a pipe, in order to
3113 try to track down a specific problem.
3115 4. Testing facility fudge: when running in the test harness and attempting
3116 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
3117 getting "No route to host". Convert this to a timeout.
3119 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
3122 6. Some OS don't have socklen_t but use size_t instead. This affects the
3123 fifth argument of getsockopt() amongst other things. This is now
3124 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
3125 can be set for individual OS. I have set it for SunOS5, OSF1, and
3126 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
3127 some earlier ones do not.
3129 7. Change 4.30/15 was not doing the test caselessly.
3131 8. The standard form for an IPv6 address literal was being rejected by address
3132 parsing in, for example, MAIL and RCPT commands. An example of this kind of
3133 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
3134 this, as well as the form without the "IPv6" on the front (but only when
3135 address literals are enabled, of course).
3137 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
3139 10. Exim crashed if a message with an empty sender address specified by -f
3140 encountered a router with an errors_to setting. This could be provoked only
3141 by a command such as
3145 where an empty string was supplied; "<>" did not hit this bug.
3147 11. Installed PCRE release 4.5.
3149 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
3150 remained set. It is now erased.
3152 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
3153 times from message ids (which are base 36 rather than the normal 62).
3155 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
3156 were being counted as actual protocol errors, and logged if the log
3157 selector +smtp_protocol_error was set. One cannot be perfect in this test,
3158 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
3159 and DATA following a set of rejected RCPTs do not count as protocol errors.
3160 In other words, Exim assumes they were pipelined, though this may not
3161 actually be the case. Of course, in all cases the client gets an
3162 appropriate error code.
3164 15. If a lookup fails in an ACL condition, a message about the failure may
3165 be available; it is used if testing the ACL cannot continue, because most
3166 such messages specify what the cause of the deferral is. However, some
3167 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
3168 that caused an old message to be retained and used if a later statement
3169 caused a defer, replacing the real cause of the deferral.
3171 16. If an IP address had so many PTR records that the DNS lookup buffer
3172 was not large enough to hold them, Exim could crash while trying to process
3173 the truncated data. It now detects and logs this case.
3175 17. Further to 4.21/58, another change has been made: if (and only if) the
3176 first line of a message (the first header line) ends with CRLF, a bare LF
3177 in a subsequent header line has a space inserted after it, so as not to
3178 terminate the header.
3180 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
3181 unnecessarily, used atoi() instead of strtol(), and didn't check the
3182 termination when getting file sizes from file names by regex.
3184 19. Completely re-implemented the support for maildirsize files, in the light
3185 of a number of problems with the previous contributed implementation
3186 (4.30/29). In particular:
3188 . If the quota is zero, the maildirsize file is maintained, but no quota is
3191 . If the maildir directory does not exist, it is created before any attempt
3192 to write a maildirsize file.
3194 . The quota value in the file is just a cache; if the quota is changed in
3195 the transport, the new value overrides.
3197 . A regular expression is available for excluding directories from the
3200 20. The autoreply transport checks the characters in options that define the
3201 message's headers; it allows continued headers, but it was checking with
3202 isspace() after an embedded newline instead of explicitly looking for a
3205 21. If all the "regular" hosts to which an address was routed had passed their
3206 expiry times, and had not reached their retry times, the address was
3207 bounced, even if fallback hosts were defined. Now Exim should go on to try
3210 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
3211 equivalent code in the SMTP transport. Some hosts send humungous responses
3212 to HELO/EHLO, more than 1024 it seems.
3214 23. Refactoring: code in filter.c used (void *) for "any old type" but this
3215 gives compiler warnings in some environments. I've now done it "properly",
3218 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
3219 (because of problems with the built-in one) was declared to return uschar *
3220 instead of char *, causing compiler failure.
3222 25. Fixed a file descriptor leak when processing alias/forward files.
3224 26. Fixed a minor format string issue in dbfn.c.
3226 27. Typo in exim.c: ("dmbnz" for "dbmnz").
3228 28. If a filter file refered to $h_xxx or $message_headers, and the headers
3229 contained RFC 2047 "words", Exim's memory could, under certain conditions,
3232 29. When a sender address is verified, it is cached, to save repeating the test
3233 when there is more than one recipient in a message. However, when the
3234 verification involves a callout, it is possible for different callout
3235 options to be set for different recipients. It is too complicated to keep
3236 track of this in the cache, so now Exim always runs a verification when a
3237 callout is required, relying on the callout cache for the optimization.
3238 The overhead is duplication of the address routing, but this should not be
3241 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
3242 to be verified with callout=postmaster, and the main callout worked but the
3243 postmaster check failed, the verification correctly failed. However, if a
3244 subsequent RCPT command asked for sender verification *without* the
3245 postmaster check, incorrect caching caused this verification also to fail,
3248 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
3249 it was not caching the DNS options (qualify_single, search_parents) that
3250 were used when the lookup failed. A subsequent lookup with different
3251 options therefore always gave the same answer, though there were cases
3252 where it should not have. (Example: a "domains = !$mx_any" option on a
3253 dnslookup router: the "domains" option is always processed without any
3254 widening, but the router might have qualify_single set.) Now Exim uses the
3255 cached value only when the same options are set.
3257 32. Added John Jetmore's "exipick" utility to the distribution.
3259 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
3260 than a timeout (e.g. a certificate is required, and is not provided), an
3261 Exim server now closes the connection immediately. Previously it waited for
3262 the client to close - but if the client is SSL, it seems that they each
3263 wait for each other, leading to a delay before one of them times out.
3265 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
3266 maintained 0.8.x compatibility because I don't think many are using it, and
3267 it is clearly obsolete.
3269 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
3272 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
3273 client certificate was expired. A simple patch fixes this, though I don't
3274 understand the full logic of why the verify callback is called multiple
3277 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
3278 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
3279 which causes problems with some clients (such as the Certicom SSL Plus
3280 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
3281 disables the coutermeasure allowing Eudora to connect."
3283 38. Exim was not checking that a write() to a log file succeeded. This could
3284 lead to Bad Things if a log got too big, in particular if it hit a file
3285 size limit. Exim now panics and dies if it cannot write to a log file, just
3286 as it does if it cannot open a log file.
3288 39. Modified OS/Makefile-Linux so that it now contains
3290 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
3292 The two -D definitions ensure that Exim is compiled with large file
3293 support, which makes it possible to handle log files that are bigger than
3296 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
3297 instance) a domain was checked against a named list that involved a lookup,
3298 causing $domain_data to be set, then another domain was checked against the
3299 same list, then the first domain was re-checked, the value of $domain_data
3300 after the final check could be wrong. In particular, if the second check
3301 failed, it could be set empty. This bug probably also applied to
3304 41. The strip_trailing_dot option was not being applied to the address given
3305 with the -f command-line option.
3307 42. The code for reading a message's header from the spool was incrementing
3308 $received_count, but never initializing it. This meant that the value was
3309 incorrect (doubled) while delivering a message in the same process in which
3310 it was received. In the most common configuration of Exim, this never
3311 happens - a fresh exec is done - but it can happen when
3312 deliver_drop_privilege is set.
3314 43. When Exim logs an SMTP synchronization error - client data sent too soon -
3315 it now includes up to 150 characters of the unexpected data in the log
3318 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
3319 and building data strings. The size of both of these buffers was 10 000
3320 bytes - far larger than anybody would *ever* want, thought I. Needless to
3321 say, somebody hit the limit. I have increased the maximum line length to
3322 20 000 and the maximum data length of concatenated lines to 100 000. I have
3323 also fixed two bugs, because there was no checking on these buffers. Tsk,
3324 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
3325 buffer is too small.
3327 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
3328 lsearch lookups. Now it does.
3330 46. When parsing a route_list item in a manualroute router, a fixed-length
3331 buffer was used for the list of hosts. I made this 1024 bytes long,
3332 thinking that nobody would ever have a list of hosts that long. Wrong.
3333 Somebody had a whole pile of complicated expansion conditions, and the
3334 string was silently truncated, leading to an expansion error. It turns out
3335 that it is easier to change to an unlimited length (owing to other changes
3336 that have happened since this code was originally written) than to build
3337 structure for giving a limitation error. The length of the item that
3338 expands into the list of hosts is now unlimited.
3340 47. The lsearch lookup could not handle data where the length of text line was
3341 more than 4095 characters. Such lines were truncated, leading to shortened
3342 data being returned. It should now handle lines of any length.
3344 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
3345 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
3348 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
3349 replacing strings such as BIN_DIRECTORY in a source file: the replacement
3350 no longer happens in comment lines. A list of replacements is now placed
3351 at the head of all of the source files, except those whose only change is
3352 to replace PERL_COMMAND in the very first #! line.
3354 50. Replaced the slow insertion sort in queue.c, for sorting the list of
3355 messages on the queue, with a bottom-up merge sort, using code contributed
3356 by Michael Haardt. This should make operations like -bp somewhat faster on
3357 large queues. It won't affect queue runners, except when queue_run_in_order
3360 51. Installed eximstats 1.31 in the distribution.
3362 52. Added support for SRV lookups to the dnslookup router.
3364 53. If an ACL referred to $message_body or $message_body_end, the value was not
3365 reset for any messages that followed in the same SMTP session.
3367 54. The store-handling optimization for building very long strings was not
3368 differentiating between the different store pools. I don't think this
3369 actually made any difference in practice, but I've tidied it.
3371 55. While running the routers to verify a sender address, $sender_address
3372 was still set to the sender address. This is wrong, because when routing to
3373 send a bounce to the sender, it would be empty. Therefore, I have changed
3374 it so that, while verifying a sender address, $sender_address is set to <>.
3375 (There is no change to what happens when verifying a recipient address.)
3377 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
3378 target A or AAAA records (if not already returned) without resetting the
3379 qualify_single or search_parents options of the DNS resolver. These are
3380 inappropriate in this case because the targets of MX and SRV records must
3381 be FQDNs. A broken DNS record could cause trouble if it happened to have a
3382 target that, when qualified, matched something in the local domain. These
3383 two options are now turned off when doing these lookups.
3385 57. It seems that at least some releases of Reiserfs (which does not have the
3386 concept of a fixed number of inodes) returns zero and not -1 for the
3387 number of available inodes. This interacted badly with check_spool_inodes,
3388 which assumed that -1 was the "no such thing" setting. What I have done is
3389 to check that the total number of inodes is greater than zero before doing
3390 the test of how many are available.
3392 58. When a "warn" ACL statement has a log_message modifier, the message is
3393 remembered, and not repeated. This is to avoid a lot of repetition when a
3394 message has many recipients that cause the same warning to be written.
3395 Howewer, Exim was preserving the list of already written lines for an
3396 entire SMTP session, which doesn't seem right. The memory is now reset if a
3397 new message is started.
3399 59. The "rewrite" debugging flag was not showing the result of rewriting in the
3400 debugging output unless log_rewrite was also set.
3402 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
3403 of (int)(handle) when we know that handle contains (void *)(-1).
3405 61. The Exim daemon panic-logs an error return when it closes the incoming
3406 connection. However "connection reset by peer" seems to be common, and
3407 isn't really an error worthy of noting specially, so that particular error
3410 62. When Exim is trying to find all the local interfaces, it used to panic and
3411 die if the ioctl to get the interface flags failed. However, it seems that
3412 on at least one OS (Solaris 9) it is possible to have an interface that is
3413 included in the list of interfaces, but for which you get a failure error
3414 for this call. This happens when the interface is not "plumbed" into a
3415 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
3416 failure of the "get flags" call assumes that the interface is down.
3418 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
3419 makes life easier for people who are doing arithmetic on fields extracted
3420 from dates, where you often get leading zeros that should not be
3421 interpreted as octal.
3423 64. Added qualify_domain to the redirect router, to override the global
3426 65. If a pathologically long header line contained very many addresses (the
3427 report of this problem mentioned 10 000) and each of them was rewritten,
3428 Exim could use up a very large amount of memory. (It kept on making new
3429 copies of the header line as it rewrote, and never released the old ones.)
3430 At the expense of a bit more processing, the header rewriting function has
3431 been changed so that it no longer eats memory in this way.
3433 66. The generation of the Received: header has been moved from the time that a
3434 message starts to be received, to the time that it finishes. The timestamp
3435 in the Received: header should now be very close to that of the <= log
3436 line. There are two side-effects of this change:
3438 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
3439 logged header lines no longer include the local Received: line, because
3440 it has not yet been created. The same applies to a copy of the message
3441 that is returned to a non-SMTP sender when a message is rejected.
3443 (b) When a filter file is tested using -bf, no additional Received: header
3444 is added to the test message. After some thought, I decided that this
3447 This change does not affect the value of $received_for. It is still set
3448 after address rewriting, but before local_scan() is called.
3450 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
3452 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
3453 gave an unhelpful panic error message, and a defer error. I have managed to
3454 change this behaviour so that it now rejects any supplied certificate,
3455 which seems right, as the list of acceptable certificates is empty.
3457 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
3458 gave an unhelpful defer error. I have not managed to make this reject any
3459 supplied certificates, but the error message it gives is "no certificate
3460 supplied", which is not helpful.
3462 70. exigrep's output now also includes lines that are not associated with any
3463 message, but which match the given pattern. Implemented by a patch from
3464 Martin Sluka, which also tidied up the Perl a bit.
3466 71. Recipient callout verification, like sender verification, was using <> in
3467 the MAIL FROM command. This isn't really the right thing, since the actual
3468 sender may affect whether the remote host accepts the recipient or not. I
3469 have changed it to use the actual sender in the callout; this means that
3470 the cache record is now keyed on a recipient/sender pair, not just the
3471 recipient address. There doesn't seem to be a real danger of callout loops,
3472 since a callout by the remote host to check the sender would use <>.
3473 [SEE ABOVE: changed after hitting problems.]
3475 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
3476 temporary errors. However, in the case of such a code being given after
3477 the end of a data transmission (i.e. after ".") Exim was failing to write
3478 a retry record for the message. (Yes, there was some broken host that was
3479 actually sending 8xx at this point.)
3481 73. An unknown lookup type in a host list could cause Exim to panic-die when
3482 the list was checked. (An example that provoked this was putting <; in the
3483 middle of a list instead of at the start.) If this happened during a DATA
3484 ACL check, a -D file could be left lying around. This kind of configuration
3485 error no longer causes Exim to die; instead it causes a defer errror. The
3486 incident is still logged to the main and panic logs.
3488 74. Buglet left over from Exim 3 conversion. The message "too many messages
3489 in one connection" was written to the rejectlog but not the mainlog, except
3490 when address rewriting (yes!) was being logged.
3492 75. Added write_rejectlog option.
3494 76. When a system filter was run not as root (that is, when system_filter_user
3495 was set), the values of the $n variables were not being returned to the
3496 main process; thus, they were not subsequently available in the $sn
3499 77. Added +return_path_on_delivery log selector.
3501 78. A connection timeout was being treated differently from recipients deferred
3502 when testing hosts_max_try with a message that was older than the host's
3503 retry timeout. (The host should not be counted, thus allowing all hosts to
3504 be tried at least once before bouncing.) This may have been the cause of an
3505 occasionally reported bug whereby a message would remain on the queue
3506 longer than the retry timeout, but would be bounced if a delivery was
3507 forced. I say "may" because I never totally pinned down the problem;
3508 setting up timeout/retry tests is difficult. See also the next item.
3510 79. The ultimate address timeout was not being applied to errors that involved
3511 a combination of host plus message (for example, a timeout on a MAIL
3512 command). When an address resolved to a number of possible hosts, and they
3513 were not all tried for each delivery (e.g. because of hosts_max_try), a
3514 message could remain on the queue longer than the retry timeout.
3516 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
3519 81. Fixed an obscure SMTP outgoing bug which required at least the following
3520 conditions: (a) there was another message waiting for the same server;
3521 (b) the server returned 5xx to all RCPT commands in the first message so
3522 that the message was not completed; (c) the server dropped the connection
3523 or gave a negative response to the RSET that Exim sends to abort the
3524 transaction. The observed case was a dropped connection after DATA that had
3525 been sent in pipelining mode. That is, the server had advertised PIPELINING
3526 but was not implementing it correctly. The effect of the bug was incorrect
3527 behaviour, such as trying another host, and this could lead to a crash.
3533 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
3534 and daemon.c were passed as pointers to ints; they should have been
3535 pointers to socklen_t variables (which are typically unsigned ints).
3537 2. Some signed/unsigned type warnings in the os.c file for Linux have been
3540 3. Fixed a really odd bug that affected only the testing scheme; patching a
3541 certain fixed string in the binary changed the value of another string that
3542 happened to be identical to the end of the original first string.
3544 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
3545 name", it returns that address as the IP address. On some operating
3546 systems (e.g. Solaris), it also passes back the IP address string as the
3547 "host name". However, on others (e.g. Linux), it passes back an empty
3548 string. Exim wasn't checking for this, and was changing the host name to an
3549 empty string, assuming it had been canonicized.
3551 5. Although rare, it is permitted to have more than one PTR record for a given
3552 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
3553 all the names associated with an address, because they do in Solaris.
3554 However, it seems that they do not in Linux for data that comes from the
3555 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
3556 I found this out when I moved to a new Linux workstation and tried to run
3557 the Exim test suite.
3559 To get round this problem I have changed the code so that it now does its
3560 own call to the DNS to look up PTR records when searching for a host name.
3561 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
3562 addresses that are only in /etc/hosts are still found.
3564 This behaviour is, however, controlled by an option called host_lookup_
3565 order, which defaults to "bydns:byaddr". If people want to use the other
3566 order, or indeed, just use one or the other means of lookup, they can
3567 specify it in this variable.
3569 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
3570 some operating systems, this comes back from gethostbyaddr() as an empty
3571 string, and this is what Exim used to test for. However, it seems that in
3572 other systems, "." is yielded. Exim now tests for this case too.
3574 7. The values of check_spool_space and check_log_space are now held internally
3575 as a number of kilobytes instead of an absolute number of bytes. If a
3576 numbers is specified without 'K' or 'M', it is rounded up to the nearest
3577 kilobyte. This means that much larger values can be stored.
3579 8. Exim monitor: an attempt to get the action menu when not actually pointing
3580 at a message produces an empty menu entitled "No message selected". This
3581 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
3582 no entries in it ("Shell widget menu has zero width and/or height"). So I
3583 have added a single, blank menu entry in this case.
3585 9. Added ${quote_local_part.
3587 10. MIME decoding is now applied to the contents of Subject: header lines when
3590 11. Now that a reference to $sender_host_address automatically causes a reverse
3591 lookup to occur if necessary (4.13/18), there is no need to arrange for a
3592 host lookup before query-style lookups in lists that might use this
3593 variable. This has therefore been abolished, and the "net-" prefix is no
3594 longer necessary for query-style lookups.
3596 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
3597 have been a typo for LFLAGS, so it has been changed.
3599 13. The install script calls Exim with "-C /dev/null" in order to find the
3600 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
3601 to be output. Howeve, since Exim outputs its version number before the
3602 error, it didn't break the script. It just looked ugly. I fixed this by
3603 always allowing "-C /dev/null" if the caller is root.
3605 14. Ignore overlarge ACL variable number when reading spool file - insurance
3606 against a later release with more variables having written the file.
3608 15. The standard form for an IPv6 address literal was being rejected by EHLO.
3609 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
3610 this, as well as the form without the "IPv6" on the front.
3612 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
3613 OS/Makefile-Darwin file.
3615 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
3616 only to LDAP libraries that do not have LDAP_OPT_DEREF.
3618 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
3619 variable. However, some OS use ints for inodes. I've added cast to long int
3620 to get rid of the compiler warning.
3622 19. I had forgotten to lock out "/../" in configuration file names when
3623 ALT_CONFIG_PREFIX was set.
3625 20. Routers used for verification do not need to specify transports. However,
3626 if such a router generated a host list, and callout was configured, Exim
3627 crashed, because it could not find a port number from the (non-existent)
3628 transport. It now assumes port 25 in this circumstance.
3630 21. Added the -t option to exigrep.
3632 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
3633 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
3634 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
3635 them is set, LOOKUP_LSEARCH is forced.
3637 23. "exim -bV" now outputs a list of lookups that are included in the binary.
3639 24. Added sender and host information to the "rejected by local_scan()" log
3640 line; previously there was no indication of these.
3642 25. Added .include_if_exists.
3644 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
3645 Linux. It turns out that not all file systems support this. Apparently some
3646 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
3647 do it.) To cope with this, the error EINVAL, which means that sync-ing is
3648 not supported on the file descriptor, is now ignored when Exim is trying to
3649 sync a directory. This applies only to Linux.
3651 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
3653 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
3654 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
3657 29. Added support for maildirsize files from supplied patch (modified a bit).
3659 30. The use of :fail: followed by an empty string could lead Exim to respond to
3660 sender verification failures with (e.g.):
3662 550 Verification failed for <xxx>
3663 550 Sender verify failed
3665 where the first response line was missing the '-' that indicates it is not
3666 the final line of the response.
3668 31. The loop for finding the name of the user that called Exim had a hardwired
3669 limit of 10; it now uses the value of finduser_retries, which is used for
3670 all other user lookups.
3672 32. Added $received_count variable, available in data and not_smtp ACLs, and at
3675 33. Exim was neglecting to zero errno before one call of strtol() when
3676 expanding a string and expecting an integer value. On some systems this
3677 resulted in spurious "integer overflow" errors. Also, it was casting the
3678 result into an int without checking.
3680 34. Testing for a connection timeout using "timeout_connect" in the retry rules
3681 did not work. The code looks as if it has *never* worked, though it appears
3682 to have been documented since at least releast 1.62. I have made it work.
3684 35. The "timeout_DNS" error in retry rules, also documented since at least
3685 1.62, also never worked. As it isn't clear exactly what this means, and
3686 clearly it isn't a major issue, I have abolished the feature by treating it
3687 as "timeout", and writing a warning to the main and panic logs.
3689 36. The display of retry rules for -brt wasn't always showing the error code
3692 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
3693 timeout_connect_A, timeout_connect_MX.
3695 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
3696 to the empty sender.
3698 39. The daemon was not analysing the content of -oX till after it had closed
3699 stderr and disconnected from the controlling terminal. This meant that any
3700 syntax errors were only noted on the panic log, and the return code from
3701 the command was 0. By re-arranging the code a little, I've made the
3702 decoding happen first, so such errors now appear on stderr, and the return
3703 code is 1. However, the actual setting up of the sockets still happens in
3704 the disconnected process, so errors there are still only recorded on the
3707 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
3708 connections (as happens on some IP stacks) was logged at start up time as
3709 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
3710 it from "IPv6 and IPv4", which means that two separate sockets are being
3713 41. The debug output for gethostbyname2() or getipnodebyname() failures now
3714 says whether AF_INET or AF_INET6 was passed as an argument.
3716 42. Exiwhat output was messed up when time zones were included in log
3719 43. Exiwhat now gives more information about the daemon's listening ports,
3720 and whether -tls-on-connect was used.
3722 44. The "port" option of the smtp transport is now expanded.
3724 45. A "message" modifier in a "warn" statement in a non-message ACL was being
3725 silently ignored. Now an error message is written to the main and panic
3728 46. There's a new ACL modifier called "logwrite" which writes to a log file
3729 as soon as it is encountered.
3731 47. Added $local_user_uid and $local_user_gid at routing time.
3733 48. Exim crashed when trying to verify a sender address that was being
3736 49. Exim was recognizing only a space character after ".include". It now also
3737 recognizes a tab character.
3739 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
3740 extracting the relevant information from the specification. The man page no
3741 longer contains scrambled data for the -d option, and I've added a section
3742 at the front about calling Exim under different names.
3744 51. Added "extra_headers" argument to the "mail" command in filter files.
3746 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
3749 53. Installed eximstats 1.29.
3751 54. Added transport_filter_timeout as a generic transport option.
3753 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
3754 Cc: header lines. This was required by RFC 822, but it not required by RFC
3757 56. Exim used to add From:, Date:, and Message-Id: header lines to any
3758 incoming messages that did not have them. Now it does so only if the
3759 message originates locally, that is, if there is no associated remote host
3760 address. When Resent- header lines are present, this applies to the Resent-
3761 lines rather than the non-Resent- lines.
3763 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
3764 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
3766 58. Messages for configuration errors now include the name of the main
3767 configuration file - useful now that there may be more than one file in a
3768 list (.included file names were always shown).
3770 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
3771 for those rare installations that do not start the daemon as root or run it
3772 setuid root. I've cut out the call to initgroups() if the daemon is not
3775 60. The Exim user and group can now be bound into the binary as text strings
3776 that are looked up at the start of Exim's processing.
3778 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
3780 62. Added $mailstore_basename variable.
3782 63. Installed patch to sieve.c from Michael Haardt.
3784 64. When Exim failed to open the panic log after failing to open the main log,
3785 the original message it was trying to log was written to stderr and debug
3786 output, but if they were not available (the usual case in production), it
3787 was lost. Now it is written to syslog before the two lines that record the
3788 failures to open the logs.
3790 65. Users' Exim filters run in subprocesses under the user's uid. It is
3791 possible for a "deliver" command or an alias in a "personal" command to
3792 provoke an address rewrite. If logging of address rewriting is configured,
3793 this fails because the process is not running as root or exim. There may be
3794 a better way of dealing with this, but for the moment (because 4.30 needs
3795 to be released), I have disabled address rewrite logging when running a
3796 filter in a non-root, non-exim process.
3802 1. The buildconfig auxiliary program wasn't quoting the value set for
3803 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
3804 not defined. This bug was masked in 4.22 by the effect that was fixed in
3807 2. Some messages that were rejected after a message id was allocated were
3808 shown as "incomplete" by exigrep. It no longer does this for messages that
3809 are rejected by local_scan() or the DATA or non-SMTP ACLs.
3811 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
3812 have allow_domain_literals set, the ID did not get logged in the <= line.
3813 Domain literals are now always recognized in Message-ID: header lines.
3815 4. The first argument for a ${extract expansion item is the key name or field
3816 number. Leading and trailing spaces in this item were not being ignored,
3817 causing some misleading effects.
3819 5. When deliver_drop_privilege was set, single queue runner processes started
3820 manually (i.e. by the command "exim -q") or by the daemon (which uses the
3821 same command in the process it spins off) were not dropping privilege.
3823 6. When the daemon running as "exim" started a queue runner, it always
3824 re-executed Exim in the spun-off process. This is a waste of effort when
3825 deliver_drop_privilege is set. The new process now just calls the
3826 queue-runner function directly.
3832 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
3835 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
3836 ignored. Though the use of -oP was forcing the writing of a pid file, it
3837 was always written to the default place.
3839 3. If the message "no IP address found for host xxxx" is generated during
3840 incoming verification, it is now followed by identification of the incoming
3841 connection (so you can more easily find what provoked it).
3843 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
3845 5. Added some features to "harden" Exim a bit more against certain attacks:
3847 (a) There is now a build-time option called FIXED_NEVER_USERS that can
3848 be put in Local/Makefile. This is like the never_users runtime option,
3849 but it cannot be overridden. The default setting is "root".
3851 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
3852 prefix string with which any file named in a -C command line option
3855 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
3856 is retained for -C and -D only if the caller of Exim is root. Without
3857 it, the exim user may also use -C and -D and retain privilege.
3859 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
3860 command line option is disabled.
3862 6. Macro names set by the -D option must start with an upper case letter, just
3863 like macro names defined in the configuration file.
3865 7. Added "dereference=" facility to LDAP.
3867 8. Two instances of the typo "uknown" in the source files are fixed.
3869 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
3870 the Configure-Makefile script screwed up while processing it.
3872 10. Incorporated PCRE 4.4.
3874 11. The SMTP synchronization check was not operating right at the start of an
3875 SMTP session. For example, it could not catch a HELO sent before the client
3876 waited for the greeting. There is now a check for outstanding input at the
3877 point when the greeting is written. Because of the duplex, asynchronous
3878 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
3879 way, but not yet received, when the check is performed.
3881 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
3882 on TCP/IP sockets, because this apparently causes some broken clients to
3885 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
3886 unchanged) from the Cygwin maintainer.
3888 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
3889 was supported instead of testing for mbx. Effectively a typo.
3891 15. The spa authenticator server code was not checking that the input it
3892 received was valid base64.
3894 16. The debug output line for the "set" modifier in ACLs was not showing the
3895 name of the variable that was being set.
3897 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
3899 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
3900 lookup on its own. Something else was needed to trigger the lookup. For
3901 example, a match in host_lookup or the need for a host name in a host list.
3902 Now, if $sender_host_name is referenced and the host name has not yet been
3903 looked up, a lookup is performed. If the lookup fails, the variable remains
3904 empty, and $host_lookup_failed is set to "1".
3906 19. Added "eqi" as a case-independent comparison operator.
3908 20. The saslauthd authentication condition could segfault if neither service
3909 nor realm was specified.
3911 21. If an overflowing value such as "2048M" was set for message_size_limit, the
3912 error message that was logged was misleading, and incoming SMTP
3913 connections were dropped. The message is now more accurate, and temporary
3914 errors are given to SMTP connections.
3916 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
3917 (except RSET) with a 421 error, until QUIT is received. However, it was
3918 failing to send a response to QUIT.
3920 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
3921 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
3922 ACL is now run after the helo_try_verify_hosts code.
3924 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
3925 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
3926 case-independent, so other case variants are also recognized). Apparently
3927 some systems use these upper case variants.
3929 25. If more than two messages were waiting for the same host, and a transport
3930 filter was specified for the transport, Exim sent two messages over the
3931 same TCP/IP connection, and then failed with "socket operation on non-
3932 socket" when it tried to send the third.
3934 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
3936 27. The extern definition of crypt16() in expand.c was not being excluded when
3937 the OS had its own crypt16() function.
3939 28. Added bounce_return_body as a new option, and bounce_return_size_limit
3940 as a preferred synonym for return_size_limit, both as an option and as an
3943 29. Added LIBS=-liconv to OS/Makefile-OSF1.
3945 30. Changed the default configuration ACL to relax the local part checking rule
3946 for addresses that are not in any local domains. For these addresses,
3947 slashes and pipe symbols are allowed within local parts, but the sequence
3948 /../ is explicitly forbidden.
3950 31. SPA server authentication was not clearing the challenge buffer before
3953 32. log_message in a "warn" ACL statement was writing to the reject log as
3954 well as to the main log, which contradicts the documentation and doesn't
3955 seem right (because no rejection is happening). So I have stopped it.
3957 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
3958 However, I am unable to do any testing of this.
3960 34. Fixed an infelicity in the appendfile transport. When checking directories
3961 for a mailbox, to see if any needed to be created, it was accidentally
3962 using path names with one or more superfluous leading slashes; tracing
3963 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
3965 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
3966 contents are added to the log line that is written for every discarded
3967 recipient. (Previously a log_message setting was ignored.)
3969 36. The ${quote: operator now quotes the string if it is empty.
3971 37. The install script runs exim in order to find its version number. If for
3972 some reason other than non-existence or emptiness, which it checks, it
3973 could not run './exim', it was installing it with an empty version number,
3974 i.e. as "exim-". This error state is now caught, and the installation is
3977 38. An argument was missing from the function that creates an error message
3978 when Exim fails to connect to the socket for saslauthd authentication.
3979 This could cause Exim to crash, or give a corrupted message.
3981 39. Added isip, isip4, and isip6 to ${if conditions.
3983 40. The ACL variables $acl_xx are now saved with the message, and can be
3984 accessed later in routers, transports, and filters.
3986 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
3987 strings in the file are not string-expanded.
3989 42. If a MAIL command specified a SIZE value that was too large to fit into an
3990 int variable, the check against message_size_limit failed. Such values are
3991 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
3992 day this will have to be increased, but I don't think I want to be around
3993 when emails are that large.
4000 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
4001 iconv() is not standard in FreeBSD.
4003 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
4004 IPv6 enabled. The observed symptom was a segmentation fault on return from
4005 the function os_common_find_running_interfaces() in src/os.c.
4007 3. In the check_special_case() function in daemon.c I had used "errno" as an
4008 argument name, which causes warnings on some systems. This was basically a
4009 typo, since it was named "eno" in the comments!
4011 4. The code that waits for the clock to tick (at a resolution of some fraction
4012 of a second) so as to ensure message-id uniqueness was always waiting for
4013 at least one whole tick, when it could have waited for less. [This is
4014 almost certainly not relevant at current processor speeds, where it is
4015 unlikely to ever wait at all. But we try to future-proof.]
4017 5. The function that sleeps for a time interval that includes fractions of a
4018 second contained a race. It did not block SIGALRM between setting the
4019 timer, and suspending (a couple of lines later). If the interval was short
4020 and the sigsuspend() was delayed until after it had expired, the suspension
4021 never ended. On busy systems this could lead to processes getting stuck for
4024 6. Some uncommon configurations may cause a lookup to happen in a queue runner
4025 process, before it forks any delivery processes. The open lookup caching
4026 mechanism meant that the open file or database connection was passed into
4027 the delivery process. The problem was that delivery processes always tidy
4028 up cached lookup data. This could cause a problem for the next delivery
4029 process started by the queue runner, because the external queue runner
4030 process does not know about the closure. So the next delivery process
4031 still has data in the lookup cache. In the case of a file lookup, there was
4032 no problem because closing a file descriptor in a subprocess doesn't affect
4033 the parent. However, if the lookup was caching a connection to a database,
4034 the connection was closed, and the second delivery process was likely to
4035 see errors such as "PGSQL: query failed: server closed the connection
4036 unexpectedly". The problem has been fixed by closing all cached lookups
4037 in a queue runner before running a delivery process.
4039 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
4040 seem to have the "const" qualifier which it has on other OS. I've
4043 8. Change 4.21/2 was too strict. It is only if there are two authenticators
4044 *of the same type* (client or server) with the same public name that an
4045 error should be diagnosed.
4047 9. When Exim looked up a host name for an IP address, but failed to find the
4048 original IP address when looking up the host name (a safety check), it
4049 output the message "<ip address> does not match any IP for NULL", which was
4050 confusing, to say the least. The bug was that the host name should have
4051 appeared instead of "NULL".
4053 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
4054 user that is built into the binary, and the -C or -D options is used, root
4055 privilege is dropped before the configuration file is read. In addition,
4056 logging is switched to stderr instead of the normal log files. If the
4057 configuration then re-defines the Exim user, the unprivileged environment
4058 is probably not what is expected, so Exim logs a panic warning message (but
4061 However, if deliver_drop_privilege is set, the unprivileged state may well
4062 be exactly what is intended, so the warning has been cut out in that case,
4063 and Exim is allowed to try to write to its normal log files.
4069 1. smtp_return_error_details was not giving details for temporary sender
4070 or receiver verification errors.
4072 2. Diagnose a configuration error if two authenticators have the same public
4075 3. Exim used not to create the message log file for a message until the first
4076 delivery attempt. This could be confusing when incoming messages were held
4077 for policy or load reasons. The message log file is now created at the time
4078 the message is received, and an initial "Received" line is written to it.
4080 4. The automatically generated man page for command line options had a minor
4081 bug that caused no ill effects; however, a more serious problem was that
4082 the procedure for building the man page automatically didn't always
4083 operate. Consequently, release 4.20 contains an out-of-date version. This
4084 shouldn't happen again.
4086 5. When building Exim with embedded Perl support, the script that builds the
4087 Makefile was calling 'perl' to find its compile-time parameters, ignoring
4088 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
4090 6. The freeze_tell option was not being used for messages that were frozen on
4091 arrival, either by an ACL or by local_scan().
4093 7. Added the smtp_incomplete_transaction log selector.
4095 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
4096 was accepting AUTH without a new EHLO.
4098 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
4099 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
4102 10. Logging of TCP/IP connections (when configured) now happens in the main
4103 daemon process instead of the child process, so that the TCP/IP connection
4104 count is more accurate (but it can never be perfect).
4106 11. The use of "drop" in a nested ACL was not being handled correctly in the
4107 outer ACL. Now, if condition failure induced by the nested "drop" causes
4108 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
4109 or "require"), the connection is dropped.
4111 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
4112 that yield "discard" can now be used with an "accept" or a "discard" verb,
4113 but an error is generated for any others (because I can't see a useful way
4114 to define what should happen).
4116 13. When an ACL is read dynamically from a file (or anywhere else), the lines
4117 are now processed in the same way as lines in the Exim configuration file.
4118 In particular, continuation lines are supported.
4120 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
4122 15. Added -ti meaning -t -i.
4124 16. Check for letters, digits, hyphens, and dots in the names of dnslist
4125 domains, and warn by logging if others are found.
4127 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
4128 returned from GIFCONF when Exim is trying to find the list of interfaces on
4129 a host. The code in os.c has been modified to copy each ifreq to an aligned
4130 structure in all cases.
4132 Also, in some cases, the returned ifreq's were being copied to a 'struct
4133 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
4134 means the last couple of bytes of an IPv6 address could be chopped if the
4135 ifreq contained only a normal sockaddr (14 bytes storage).
4137 18. Named domain lists were not supported in the hosts_treat_as_local option.
4138 An entry such as +xxxx was not recognized, and was treated as a literal
4141 19. Ensure that header lines added by a DATA ACL are included in the reject log
4142 if the ACL subsequently rejects the message.
4144 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
4145 MD5 (which is deprecated).
4147 21. When testing a filter file using -bf, Exim was writing a message when it
4148 took the sender from a "From " line in the message, but it was not doing so
4149 when it took $return_path from a Return-Path: header line. It now does.
4151 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
4152 with a valid header line field name (a series of printing characters
4153 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
4155 23. Changed "disc" in the source to "disk" to conform to the documentation and
4156 the book and for uniformity.
4158 24. Ignore Sendmail's -Ooption=value command line item.
4160 25. When execve() failed while trying to run a command in a pipe transport,
4161 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
4162 could be confused with a return value of 69 from the command itself. This
4163 has been changed to 127, the value the shell returns if it is asked to run
4164 a non-existent command. The wording for the related log line suggests a
4165 non-existent command as the problem.
4167 26. If received_header_text expands to an empty string, do not add a Received:
4168 header line to the message. (Well, it adds a token one on the spool, but
4169 marks it "old" so that it doesn't get used or transmitted.)
4171 27. Installed eximstats 1.28 (addition of -nt option).
4173 28. There was no check for failure on the call to getsockname() in the daemon
4174 code. This can fail if there is a shortage of resources on the system, with
4175 ENOMEM, for example. A temporary error is now given on failure.
4177 29. Contrary to the C standard, it seems that in some environments, the
4178 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
4179 program. Exim now does this explicitly; it affects the formatting of
4180 timestamps using strftime().
4182 30. If exiqsumm was given junk data, it threw up some uninitialized variable
4183 complaints. I've now initialized all the variables, to avoid this.
4185 32. Header lines added by a system filter were not being "seen" during
4186 transport-time rewrites.
4188 33. The info_callback() function passed to OpenSSL is set up with type void
4189 (*)(SSL *, int, int), as described somewhere. However, when calling the
4190 function (actually a macro) that sets it up, the type void(*)() is
4191 expected. I've put in a cast to prevent warnings from picky compilers.
4193 34. If a DNS black list lookup found a CNAME record, but there were no A
4194 records associated with the domain it pointed at, Exim crashed.
4196 35. If a DNS black list lookup returned more than one A record, Exim ignored
4197 all but the first. It now scans all returned addresses if a particular IP
4198 value is being sought. In this situation, the contents of the
4199 $dnslist_value variable are a list of all the addresses, separated by a
4202 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
4203 to accept a host name and all its aliases if the forward lookup for any of
4204 them yielded the IP address of the incoming connection. Now it accepts only
4205 those names whose forward lookup yields the correct IP address. Any other
4206 names are discarded. This closes a loophole whereby a rogue DNS
4207 administrator could create reverse DNS records to break through a
4208 wildcarded host restriction in an ACL.
4210 37. If a user filter or a system filter that ran in a subprocess used any of
4211 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
4212 the wrong values were passed to the pipe command ($thisaddress had the
4213 value of $0, $0 had the value of $1, etc). This bug was introduced by
4214 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
4216 38. Improved the line breaking for long SMTP error messages from ACLs.
4217 Previously, if there was no break point between 40 and 75 characters, Exim
4218 left the rest of the message alone. Two changes have been made: (a) I've
4219 reduced the minimum length to 35 characters; (b) if it can't find a break
4220 point between 35 and 75 characters, it looks ahead and uses the first one
4221 that it finds. This may give the occasional overlong line, but at least the
4222 remaining text gets split now.
4224 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
4225 file descriptors might be low, and that setting 1000 would always raise it.
4226 It turns out that in some environments, the limit is already over 1000 and
4227 that lowering it causes trouble. So now Exim takes care not to decrease it.
4229 40. When delivering a message, the value of $return_path is set to $sender_
4230 address at the start of routing (routers may change the value). By an
4231 oversight, this default was not being set up when an address was tested by
4232 -bt or -bv, which affected the outcome if any router or filter referred to
4235 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
4236 log only when "message" or "log_message" are set. However, if one of the
4237 conditions was an address verification, or a call to a nested ACL, the
4238 messages generated by the underlying test were being passed through. This
4239 no longer happens. The underlying message is available in $acl_verify_
4240 message for both "message" and "log_message" expansions, so it can be
4241 passed through if needed.
4243 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
4244 new expansion $bh_ to give the encoded byte string without charset
4245 translation. Translation happens only if iconv() is available; HAVE_ICONV
4246 indicates this at build time. HEADERS_CHARSET gives the charset to
4247 translate to; headers_charset can change it in the configuration, and
4248 "headers charset" can change it in an individual filter file.
4250 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
4251 that creates RFC 2047 encoded "words" labels them as that charset instead
4252 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
4253 expansion operator; (ii) when Exim creates a From: line for a local
4254 message; (iii) when a header line is rewritten to include a "phrase" part.
4256 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
4257 buggy, causing it to skip the first lines of messages whose message ID
4258 ended in 'D'. This would not have bitten before Exim release 4.14, because
4259 message IDs were unlikely to end in 'D' before then. The effect was to have
4260 incorrect size information for certain domains.
4262 45. #include "config.h" was missing at the start of the crypt16.c module. This
4263 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
4266 46. If there was a timeout during a "random" callout check, Exim treated it as
4267 a failure of the random address, and carried on sending RSET and the real
4268 address. If the delay was just some slowness somewhere, the response to the
4269 original RCPT would be taken as a response to RSET and so on, causing
4270 mayhem of various kinds.
4272 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
4273 when I implemented it. It didn't allow for the fact that some option values
4274 may legitimatetly be negative (e.g. size_addition), and it didn't even do
4275 the right test for positive values.
4277 48. Domain names in DNS records are case-independent. Exim always looks them up
4278 in lower case. Some resolvers return domain names in exactly the case they
4279 appear in the zone file, that is, they may contain uppercase letters. Not
4280 all resolvers do this - some return always lower case. Exim was treating a
4281 change of case by a resolver as a change of domain, similar to a widening
4282 of a domain abbreviation. This triggered its re-routing code and so it was
4283 trying to route what was effectively the same domain again. This normally
4284 caused routing to fail (because the router wouldn't handle the domain
4285 twice). Now Exim checks for this case specially, and just changes the
4286 casing of the domain that it ultimately uses when it transmits the message
4289 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
4292 50. If a filter generated a file delivery with a non-absolute name (possible if
4293 no home directory exists for the router), the forbid_file option was not
4296 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
4297 the existing equality matching.
4299 52. Exim was using ints instead of ino_t variables in some places where it was
4300 dealing with inode numbers.
4302 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
4303 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
4304 called TMPDIR, and if it finds it is different, it changes its value.
4306 54. The smtp_printf() function is now made available to local_scan() so
4307 additional output lines can be written before returning. There is also an
4308 smtp_fflush() function to enable the detection of a dropped connection.
4309 The variables smtp_input and smtp_batched_input are exported to
4312 55. Changed the default runtime configuration: the message "Unknown user"
4313 has been removed from the ACL, and instead placed on the localuser router,
4314 using the cannot_route_message feature. This means that any verification
4315 failures that generate their own messages won't get overridden. Similarly,
4316 the "Unrouteable address" message that was in the ACL for unverifiable
4317 relay addresses has also been removed.
4319 56. Added hosts_avoid_esmtp to the smtp transport.
4321 57. The exicyclog script was not checking for the esoteric option
4322 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
4323 will work only if exicyclog is run under the appropriate euid.
4325 58. Following a discussion on the list, the rules by which Exim recognises line
4326 endings on incoming messages have been changed. The -dropcr and drop_cr
4327 options are now no-ops, retained only for backwards compatibility. The
4328 following line terminators are recognized: LF CRLF CR. However, special
4329 processing applies to CR:
4331 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
4332 nor a local message in the state where . is a terminator.
4334 (ii) If a bare CR is encountered in a header line, an extra space is added
4335 after the line terminator so as not to end the header. The reasoning
4336 behind this is that bare CRs in header lines are most likely either
4337 to be mistakes, or people trying to play silly games.
4339 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
4340 was being incorrectly given as 18 bytes larger than it should have been.
4341 This is a VOB (very old bug).
4343 60. This may never have affected anything current, but just in case it has:
4344 When the local host is found other than at the start of a list of hosts,
4345 the local host, those with the same MX, and any that follow, are discarded.
4346 When the list in question was part of a longer list of hosts, the following
4347 hosts (not currently being processed) were also being discarded. This no
4348 longer happens. I'm not sure if this situation could ever has previously
4351 61. Added the "/MX" feature to lists of hosts in the manualroute and query
4354 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
4355 header. This is something that is recommended in a new Internet Draft, and
4356 is something that is documented as being done by Sendmail. There are two
4357 possible values. For messages generated by the autoreply transport, Exim
4360 Auto-Submitted: auto-replied
4362 whereas for all other generated messages (e.g. bounces) it adds
4364 Auto-Submitted: auto-generated
4366 63. The "personal" condition in filters now includes a test for the
4367 Auto-Submitted: header. If it contains the string "auto-" the message it
4368 not considered personal.
4370 64. Added rcpt_include_affixes as a generic transport option.
4372 65. Added queue_only_override (default true).
4374 66. Added the syslog_duplication option.
4376 67. If what should have been the first header line of a message consisted of
4377 a space followed by a colon, Exim was mis-interpreting it as a header line.
4378 It isn't of course - it is syntactically invalid and should therefore be
4379 treated as the start of the message body. The misbehaviour could have
4380 caused a number of strange effects, including loss of data in subsequent
4381 header lines, and spool format errors.
4383 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
4384 client host had authenticated. This control can now be exercised by an ACL
4385 for more flexibility.
4387 69. By default, callouts do not happen when testing with -bh. There is now a
4388 variant, -bhc, which does actually run the callout code, including
4389 consulting and updating the callout cache.
4391 70. Added support for saslauthd authentication, courtesy of Alexander
4394 71. If statvfs() failed on the spool or log directories while checking their
4395 size for availability, Exim confusingly gave the error "space shortage".
4396 Furthermore, in debugging mode it crashed with a floating point exception.
4397 These checks are done if check_{spool,log}_{space,inodes} are set, and when
4398 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
4399 serious problem, Exim now writes to the main and panic logs when this
4400 happens, with details of the failure. It then refuses to accept the
4401 incoming message, giving the message "spool directory problem" or "log
4402 directory problem" with a 421 code for SMTP messages.
4404 72. When Exim is about to re-exec itself, it ensures that the file descriptors
4405 0, 1, and 2 exist, because some OS complain for execs without them (see
4406 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
4407 descriptors. However, the code omitted to check that the open succeeded,
4408 causing mysterious errors if for some reason the permissions on /dev/null
4409 got screwed. Now Exim writes a message to the main and panic logs, and
4410 bombs out if it can't open /dev/null.
4412 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
4413 interact so that it is all more flexible. It is supposed to remain
4414 backwards compatible. Also added extra_local_interfaces.
4416 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
4417 to bomb out with an assertion failure - to the client this appears as a
4418 connection drop. This problem occurs in the part of the code that was taken
4419 from the Samba project. Fortunately, the assertion is in a very simple
4420 function, so I have fixed this by reproducing the function inline in the
4421 one place where it is called, and arranging for authentication to fail
4422 instead of killing the process with assert().
4424 75. The SPA client code was not working when the server requested OEM rather
4425 than Unicode encoding.
4427 76. Added code to make require_files with a specific uid setting more usable in
4428 the case where statting the file as root fails - usually a non-root-mounted
4429 NFS file system. When this happens and the failure is EACCES, Exim now
4430 forks a subprocess and does the per-uid checking as the relevant uid.
4432 77. Added process_log_path.
4434 78. If log_file_path was not explicitly set, a setting of check_log_space or
4435 check_log_inodes was ignored.
4437 79. If a space check for the spool or log partitions fails, the incident is now
4438 logged. Of course, in the latter case the data may get lost...
4440 80. Added the %p formatting code to string_format() so that it can be used to
4441 print addresses in debug_print(). Adjusted all the address printing in the
4442 debugging in store.c to use %p rather than %d.
4444 81. There was a concern that a line of code in smtp_in.c could overflow a
4445 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
4446 initially expressed, the concern was not well-founded, because trailing
4447 spaces are removed early. However, if the trailing spaces were followed by
4448 a NULL, they did not get removed, so the overflow was possible. Two fixes
4451 (a) I re-wrote the offending code in a cleaner fashion.
4452 (b) If an incoming SMTP command contains a NULL character, it is rejected
4455 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
4456 runs initgroups(), so that if the Exim user is in any additional groups,
4457 they will be used during message reception.
4463 The change log for 4.20 and earlier releases has been archived.
git://git.exim.org / exim.git / blob