1 $Cambridge: exim/doc/doc-txt/OptionLists.txt,v 1.35 2007/08/29 13:37:28 ph10 Exp $
6 This file contains complete lists of four kinds of Exim option:
8 1. Those that can appear in the run time configuration file;
9 2. Those that can be used on the command line;
10 3. Those that can appear in the build time configuration (Local/Makefile);
11 4. Those that can appear in the build time configuration for the Exim monitor
14 This file was last updated for Exim release 4.67.
20 As Exim has developed, new options have been added at each major release. For
21 the most part, backwards compatibility has been maintained, and obsolete
22 options continue to be recognized. However, incompatible changes took place at
23 releases 3.00, and 4.00. In both cases, several groups of options were
24 amalgamated into new, extended options, and obsolete options were removed.
26 The table below contains a complete list of all Exim's current options, along
27 with their types, default values, and where they can be used. String options
28 that are expanded before use are marked with *. Host lists, domain lists, and
29 address lists are always expanded. In some cases the defaults are not fixed
30 values, or not short enough to fit in the table. These are indicated by +. Some
31 other default values are determined when the Exim binary is compiled; these are
34 For options that are specific to a particular driver, the fourth column
35 contains the driver name, for example, appendfile. Otherwise, it contains
37 . `main' for options that appear in the main section of Exim's configuration
40 . `authenticators' for generic options that apply to any authenticator;
42 . `routers' for generic options that apply to any router;
44 . `transports' for generic options that apply to any transport.
46 The fifth column contains the version of Exim in which the option was added, or
47 substantially changed. Where no number is given, the option has been in Exim
48 since the very early releases. The routers were completely reorganised for
49 release 4.00, and so no router options are shown as earlier than 4.00, though
50 in fact some of them were inherited from earlier versions.
52 -----------------------------------------------------------------------------------------
53 accept_8bitmime boolean false main 1.60
54 acl_not_smtp string* unset main 4.11
55 acl_not_smtp_mime string* unset main 4.51 with content scan
56 acl_smtp_auth string* unset main 4.00
57 acl_smtp_connect string* unset main 4.11
58 acl_smtp_data string* unset main 4.00
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_localhost boolean false smtp 1.73
82 allow_mx_to_ip boolean false main 3.14
83 allow_symlink boolean false appendfile
84 allow_utf8_domains boolean false main 4.14
85 auth_advertise_hosts host list "*" main 4.00
86 authenticated_sender string* unset smtp 4.14
87 authenticated_sender_force boolean false smtp 4.61
88 authenticate_hosts host list unset smtp 3.13
89 auto_thaw time 0s main
90 av_scanner string* + main 4.50 with content scan
91 batch_id string unset appendfile 4.00
94 batch_max integer 100 appendfile
97 bcc string* unset autoreply
98 bi_command string unset main
99 body_only boolean false transports 2.05
100 bounce_message_file string unset main 4.00
101 bounce_message_text string unset main 4.00
102 bounce_return_body boolean true main 4.23
103 bounce_return_message boolean true main 4.00
104 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
105 bounce_sender_authentication string unset main 4.00
106 callout_domain_negative_expire time 3h main 4.11
107 callout_domain_positive_expire time 7d main 4.11
108 callout_negative_expire time 2h main 4.11
109 callout_positive_expire time 24h main 4.11
110 callout_random_local_part string* + main 4.11
111 cannot_route_message string* unset routers 4.11
112 caseful_local_part boolean false routers 4.00
113 cc string* unset autoreply
114 check_ancestor boolean false redirect 4.00
115 check_group boolean false appendfile
117 check_local_user boolean false routers 4.00
118 check_log_inodes integer 0 main
119 check_log_space integer 0 main
120 check_owner boolean true appendfile 3.14
122 check_rfc2047_length boolean true main 4.60
123 check_secondary_mx boolean false dnslookup 4.00
124 check_spool_inodes integer 0 main
125 check_spool_space integer 0 main
126 check_string string "From " appendfile 3.03
128 check_srv string* unset dnslookup 4.31
129 client_condition string* unset authenticators 4.68
130 client_ignore_invalid_base64 boolean false plaintext 4.61
131 client_name string* + cram_md5 3.10
132 client_secret string* unset cram_md5 3.10
133 client_send string* unset plaintext 3.10
134 command string* unset lmtp 3.20
136 unset queryprogram 4.00
137 command_group string unset queryprogram 4.00
138 command_timeout time 5m smtp
139 command_user string unset queryprogram 4.00
140 condition string* unset routers 4.00
141 connect_timeout time 0s smtp 1.60
142 connection_max_messages integer 500 smtp 4.00 replaces batch_max
143 create_directory boolean true appendfile
144 create_file string "anywhere" appendfile
145 current_directory string unset transports 4.00
146 unset queryprogram 4.00
147 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
148 daemon_startup_retries int 9 main 4.52
149 daemon_startup_sleep time 30s main 4.52
150 data string unset redirect 4.00
151 data_timeout time 5m smtp
152 debug_print string* unset authenticators 4.00
154 unset transports 2.00
155 delay_after_cutoff boolean true smtp
156 delay_warning time list 24h main
157 delay_warning_condition string* + main 1.73
158 deliver_drop_privilege boolean false main 4.00
159 deliver_queue_load_max fixed-point unset main 1.70
160 delivery_date_add boolean false transports
161 delivery_date_remove boolean true main
162 directory string* unset appendfile
163 directory_file string* + appendfile
164 directory_mode octal-integer 0700 appendfile
165 directory_transport string* unset redirect 4.00
166 disable_ipv6 boolean false main 4.61
167 disable_logging boolean false routers 4.11
168 false transports 4.11
169 dns_again_means_nonexist domain list unset main 1.89
170 dns_check_names_pattern string + main 2.11
171 dns_csa_search_limit integer 5 main 4.60
172 dns_csa_use_reverse boolean true main 4.60
173 dns_ipv4_lookup boolean false main 3.20
174 dns_qualify_single boolean true smtp
175 dns_retrans time 0s main 1.60
176 dns_retry integer 0 main 1.60
177 dns_search_parents boolean false smtp
178 domains domain list unset routers 4.00
179 driver string unset authenticators
182 drop_cr boolean false main 4.00 became a no-op in 4.21
183 dsn_from string* + main 4.67
184 envelope_to_add boolean false transports
185 envelope_to_remove boolean true main
186 environment string* unset pipe 2.95
187 errors_copy string list* unset main
188 errors_reply_to string unset main
189 errors_to string* unset routers 4.00
190 escape_string string ">From " appendfile 3.03
192 exim_group string ++ main
193 exim_path string ++ main
194 exim_user string ++ main
195 expn boolean true routers
196 extra_local_interfaces string unset main 4.21
197 extract_addresses_remove_arguments boolean true main 1.92
198 fail_verify boolean false routers
199 fail_verify_recipient boolean false routers 4.00
200 fail_verify_sender boolean false routers 4.00
201 fallback_hosts string list unset routers 4.00
203 file string* unset appendfile
206 file_expand boolean false autoreply
207 file_format string unset appendfile 3.03
208 file_must_exist boolean false appendfile
209 file_optional boolean false autoreply
210 file_transport string* unset redirect 4.00
211 filter_prepend_home boolean true redirect 4.63
212 final_timeout time 10m smtp
213 finduser_retries integer 0 main
214 forbid_blackhole boolean false redirect 4.00
215 forbid_exim_filter boolean false redirect 4.44
216 forbid_fail boolean false redirect 4.00
217 forbid_file boolean false redirect 4.00
218 forbid_filter_existstest boolean false redirect 4.00
219 forbid_filter_logwrite boolean false redirect 4.00
220 forbid_filter_lookup boolean false redirect 4.00
221 forbid_filter_perl boolean false redirect 4.00
222 forbid_filter_readfile boolean false redirect 4.00
223 forbid_filter_readsocket boolean false redirect 4.11
224 forbid_filter_reply boolean false redirect 4.00
225 forbid_filter_run boolean false redirect 4.00
226 forbid_include boolean false redirect 4.00
227 forbid_pipe boolean false redirect 4.00
228 forbid_sieve_filter boolean false redirect 4.44
229 forbid_smtp_code boolean false redirect 4.63
230 freeze_exec_fail boolean false pipe 1.89
231 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
232 from string* unset autoreply
233 gecos_name string* unset main
234 gecos_pattern string unset main
235 gethostbyname boolean false smtp
236 gnutls_require_kx string* unset main 4.67
237 string* unset smtp 4.67
238 gnutls_require_mac string* unset main 4.67
239 string* unset smtp 4.67
240 gnutls_require_protocols string* unset main 4.67
241 string* unset smtp 4.67
242 group string + routers 4.00
243 unset transports 4.00 replaces local option in some transports
244 header_line_maxsize integer 0 (unset) main 4.14
245 header_maxsize integer 1M main 4.14
246 headers string* unset autoreply
247 headers_add string* unset routers 4.00
249 headers_charset string ++ main 4.21
250 headers_only boolean false transports 2.05
251 headers_remove string* unset routers 4.00
253 headers_rewrite string unset transports 3.20
254 helo_accept_junk_hosts host list unset main 3.00
255 helo_allow_chars string "" main 4.02
256 helo_lookup_domains domain list unset main 4.00
257 helo_data string* "$primary_hostname" smtp 3.21
258 helo_try_verify_hosts host list unset main 4.00
259 helo_verify_hosts host list unset main 1.73
260 hide_child_in_errmsg false redirect 4.00
261 hold_domains domain list unset main 1.70
262 home_directory string* unset transports 4.00 replaces individual options
263 host_all_ignored string "defer" manualroute 4.67
264 host_find_failed string "freeze" manualroute 4.00
265 host_lookup host list unset main 3.00
266 host_lookup_order string list "bydns:byaddr" main 4.30
267 host_reject_connection host list unset main 4.00
268 hosts string unset iplookup 4.00
269 string list* unset smtp
270 hosts_avoid_esmtp host list unset smtp 4.21
271 hosts_avoid_pipelining host list unset smtp 4.67
272 hosts_avoid_tls host list unset smtp 3.20
273 hosts_connection_nolog host list unset main 4.43
274 hosts_max_try integer 5 smtp 3.20
275 hosts_max_try_hardlimit integer 50 smtp 4.50
276 hosts_nopass_tls host list unset smtp 4.00
277 hosts_override boolean false smtp 2.11
278 hosts_randomize boolean false manualroute 4.00
280 hosts_require_auth host list unset smtp 4.00
281 hosts_require_tls host list unset smtp 3.20
282 hosts_treat_as_local domain list unset main 1.95
283 hosts_try_auth host list unset smtp 4.00
284 ibase_servers string unset main 4.23
285 ignore_bounce_errors_after time 0s main 4.00
286 ignore_eacces boolean false redirect 4.00
287 ignore_enotdir boolean false redirect 4.00
288 ignore_fromline_hosts host list unset main
289 ignore_fromline_local boolean false main 2.05
290 ignore_status boolean false pipe
291 ignore_target_hosts host list unset routers 4.00
292 include_directory string unset redirect 4.00
293 initgroups false routers 4.00
294 interface string list unset smtp 1.70
295 keep_malformed time 4d main
296 keepalive boolean true smtp 2.05
297 ldap_default_servers string list unset main 3.02
298 ldap_version int 2 or 3 main 4.14
299 local_from_check boolean true main 3.14
300 local_from_prefix string unset main 3.14
301 local_from_suffix string unset main 3.14
302 local_interfaces string list unset main 1.60
303 local_part_prefix string unset routers 4.00 replaces prefix
304 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
305 local_part_suffix string unset routers 4.00 replaces suffix
306 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
307 local_parts string list* unset routers 4.00
308 local_scan_timeout time 5m main 4.03
309 local_sender_retain boolean false main 4.00
310 localhost_number string unset main
311 lock_fcntl_timeout time 0s appendfile 3.14
312 lock_flock_timeout time 0s appendfile 4.11
313 lock_interval time 3s appendfile
314 lock_retries integer 10 appendfile
315 lockfile_mode octal-integer 0600 appendfile
316 lockfile_timeout time 30m appendfile
317 log string* unset autoreply
318 log_as_local boolean + routers 4.00
319 log_file_path string list ++ main
320 log_defer_output boolean false pipe 1.89
321 log_fail_output boolean false pipe 1.60
322 log_output boolean false pipe 1.60
323 log_selector string unset main 4.00
324 log_timezone boolean false main 4.11
325 lookup_open_max integer 25 main 2.05
326 mailbox_filecount string* unset appendfile 4.43
327 mailbox_size string* unset appendfile 4.43
328 maildir_format boolean false appendfile 1.70
329 maildir_retries integer 10 appendfile 1.70
330 maildir_tag string* unset appendfile 1.92
331 maildir_use_size_file boolean false appendfile 4.30
332 maildirfolder_create_regex string unset appendfile 4.62
333 mailstore_format boolean false appendfile 2.00
334 mailstore_prefix string* unset appendfile 2.00
335 mailstore_suffix string* unset appendfile 2.00
336 match_directory string* unset localuser
337 max_output integer 20K pipe
338 max_rcpt integer 100 smtp 1.60
339 max_user_name_length integer 0 main
340 mbx_format boolean false appendfile 2.10
341 message_body_newlines boolean false main 4.68
342 message_body_visible integer 500 main
343 message_id_header_domain string* unset main 4.11
344 message_id_header_text string* unset main
345 message_logs boolean true main 4.10
346 message_prefix string* + appendfile 4.00 replaces prefix
347 string* unset pipe 4.00 replaces prefix
348 message_size_limit integer 50M main
350 message_suffix string* + appendfile 4.00 replaces suffix
351 string* unset pipe 4.00 replaces suffix
352 mode octal-integer 0600 appendfile
354 mode_fail_narrower boolean true appendfile 1.70
355 modemask octal-integer 022 redirect 4.00
356 more boolean true routers 4.00
357 move_frozen_messages boolean false main 3.09
358 multi_domain boolean true smtp
359 mx_domains domain list unset dnslookup 4.00
360 mx_fail_domains domain list unset dnslookup 4.43
361 mysql_servers string list unset main 3.03
362 never_users string list unset main
363 notify_comsat boolean false appendfile
364 once string* unset autoreply
365 once_file_size integer 0 autoreply 3.20
366 once_repeat time 0s autoreply 2.95
367 one_time boolean false redirect 4.00
368 optional boolean false iplookup 4.00
369 oracle_servers string unset main 4.00
370 owners string list unset redirect 4.00
371 owngroups string list unset redirect 4.00
372 pass_on_timeout boolean false routers 4.00
373 pass_router string unset routers 4.00
374 path string "/usr/bin" pipe
375 percent_hack_domains domain list unset main
376 perl_at_start boolean false main 2.10
377 perl_startup string unset main 2.10
378 pgsql_servers string list unset main 3.14
379 pid_file_path string ++ main
380 pipe_as_creator boolean false pipe
381 pipe_transport string* unset redirect 4.00
382 pipelining_advertise_hosts host list "*" main 4.14
383 port integer 0 iplookup 4.00
385 preserve_message_logs boolean false main
386 primary_hostname string + main
387 print_topbitchars boolean false main 1.89
388 process_log_path string unset main 4.21
389 prod_requires_admin boolean true main 1.70
390 protocol string "udp" iplookup 4.00
391 string "smtp" smtp 3.20
392 public_name string unset authenticators 3.10
393 qualify_domain string + main
394 string* unset redirect 4.31
395 qualify_preserve_domain boolean false redirect 4.00
396 qualify_recipient string + main
397 qualify_single boolean true dnslookup 4.00
398 query string* + iplookup 4.00
399 queue_domains domain list unset main 4.00
400 queue_list_requires_admin boolean true main 1.95
401 queue_only boolean false main
402 queue_only_file string unset main 2.05
403 queue_only_load fixed-point unset main
404 queue_only_load_latch boolean true main 4.68
405 queue_only_override boolean true main 4.21
406 queue_run_in_order boolean false main 1.70
407 queue_run_max integer 5 main
408 queue_smtp_domains domain list unset main
409 quota string* unset appendfile 1.60
410 quota_directory string* unset appendfile 4.11
411 quota_filecount integer 0 appendfile 2.05
412 quota_is_inclusive boolean true appendfile 3.20
413 quota_size_regex string unset appendfile 3.14
414 quota_warn_message string* + appendfile 2.10
415 quota_warn_threshold string* 0 appendfile 2.10
416 rcpt_include_affixes boolean false transports 4.21
417 receive_timeout time 0s main 4.00 replacing accept_timeout
418 received_header_text string* + main
419 received_headers_max integer 30 main
420 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
421 recipients_max integer 0 main 1.60
422 recipients_max_reject boolean false main 1.70
423 redirect_router string unset routers 4.00
424 remote_max_parallel integer 1 main
425 remote_sort_domains domain list unset main 4.00 replacing remote_sort
426 repeat_use boolean true redirect 4.00
427 reply_to string* unset autoreply 2.05
428 reply_transport string* unset redirect 4.00
429 require_files string list* unset routers 4.00
430 reroute string* unset iplookup 4.00
431 response_pattern string unset iplookup 4.00
432 restrict_to_path boolean false pipe
433 retry_data_expire time 7d main 3.03
434 retry_include_ip_address boolean true smtp 1.92
435 retry_interval_max time 24h main
436 retry_use_local_part boolean + routers 4.00
437 + transports 4.00 replacing individual options
438 return_fail_output boolean false pipe 1.60
439 return_message boolean false autoreply
440 return_output boolean false pipe
441 return_path string* unset transports 2.05
442 return_path_add boolean false transports
443 return_path_remove boolean true main
444 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
445 rewrite boolean true redirect 4.00
446 rewrite_headers boolean true dnslookup 4.00
447 rfc1413_hosts host list * main
448 rfc1413_query_timeout time 5s main
449 router_home_directory string* unset routers 4.11
450 route_data string* unset manualroute 4.00
451 route_list string list unset manualroute 4.00
452 same_domain_copy_routing boolean false dnslookup 4.00
453 search_parents boolean false dnslookup 4.00
454 self string "freeze" routers 4.00
455 sender_unqualified_hosts host list unset main
456 senders address list unset routers 4.00
457 serialize_hosts host list unset smtp 1.60
458 server_advertise_condition string* unset authenticators 4.14
459 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
460 server_hostname string* "$primary_hostname" cyrus_sasl 4.43
461 server_mail_auth_condition string* unset authenticators 3.22
462 server_mech string public_name cyrus_sasl 4.43
463 server_prompts string* unset plaintext 3.10
464 server_realm string unset cyrus_sasl 4.43
465 server_secret string* unset cram_md5 3.10
466 server_service string "smtp" cyrus_sasl 4.43
467 server_set_id string* unset authenticators 3.10
468 shadow_condition string* unset transports
469 shadow_transport string unset transports
470 size_addition integer 1024 smtp 1.91
471 skip_syntax_errors boolean false redirect 4.00
472 smtp_accept_keepalive boolean true main
473 smtp_accept_max integer 20 main
474 smtp_accept_max_nonmail integer 10 main 4.11
475 smtp_accept_max_nonmail_hosts host list * main 4.14
476 smtp_accept_max_per_connection integer 1000 main 4.00
477 smtp_accept_max_per_host integer 0 main 2.05
478 smtp_accept_queue integer 0 main
479 smtp_accept_queue_per_connection integer 10 main 2.03
480 smtp_accept_reserve integer 0 main
481 smtp_active_hostname string* unset main 4.33
482 smtp_banner string* + main
483 smtp_check_spool_space boolean true main 2.10
484 smtp_connect_backlog integer 5 main
485 smtp_enforce_sync boolean true main 4.00
486 smtp_etrn_command string* unset main 1.92
487 smtp_etrn_serialize boolean true main 1.89
488 smtp_load_reserve fixed-point unset main
489 smtp_max_synprot_errors integer 3 main 4.30
490 smtp_max_unknown_commands integer 3 main 4.14
491 smtp_ratelimit_hosts host list unset main 4.00
492 smtp_ratelimit_mail string unset main 4.00
493 smtp_ratelimit_rcpt string unset main 4.00
494 smtp_receive_timeout time 5m main
495 smtp_reserve_hosts host list unset main
496 smtp_return_error_details boolean false main 4.11
497 socket string* unset lmtp 4.11
498 spamd_address string + main 4.50 with content scan
499 split_spool_directory boolean false main 1.70
500 spool_directory string ++ main
501 sqlite_lock_timeout time 5s main 4.53
502 strict_acl_vars boolean false main 4.64
503 srv_fail_domains domain list unset dnslookup 4.43
504 strip_excess_angle_brackets boolean false main
505 strip_trailing_dot boolean false main
506 subject string* unset autoreply
507 syntax_errors_text string* unset redirect 4.00
508 syntax_errors_to string unset redirect 4.00
509 syslog_duplication boolean true main 4.21
510 syslog_facility string unset main 4.20
511 syslog_processname string "exim" main 4.20
512 syslog_timestamp boolean true main 4.00
513 system_filter string unset main 4.00 replacing message_filter
514 system_filter_directory_transport string unset main 4.00 replacing message_filter
515 system_filter_file_transport string unset main 4.00 replacing message_filter
516 system_filter_group string unset main 4.00 replacing message_filter
517 system_filter_pipe_transport string unset main 4.00 replacing message_filter
518 system_filter_reply_transport string unset main 4.00 replacing message_filter
519 system_filter_user string unset main 4.00 replacing message_filter
520 tcp_nodelay boolean true main 4.23
522 temp_errors string list + pipe 1.95
523 text string* unset autoreply
524 timeout time 5m lmtp 3.20
528 timeout_defer boolean false pipe 4.51
529 timeout_frozen_after time 0s main 3.20
530 timezone string + main 3.15
531 tls_advertise_hosts host list * main 3.20
532 tls_certificate string* unset main 3.20
534 tls_dhparam string* unset main 3.20
535 tls_on_connect_ports string unset main 4.43
536 tls_privatekey string* unset main 3.20
538 tls_remember_emstp boolean false main 4.21
539 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
540 string* unset main 4.33
541 tls_tempfail_tryclear boolean true smtp 4.05
542 tls_try_verify_hosts host list unset main 4.00
543 tls_verify_certificates string* unset main 3.20
545 tls_verify_hosts host list unset main 3.20
546 to string* unset autoreply
547 translate_ip_address string unset routers 4.00
548 transport string* unset routers 4.00
549 transport_current_directory string unset routers 4.00
550 transport_home_directory string unset routers 4.00
551 transport_filter string unset transports
552 transport_filter_timeout time 5m transports 4.30
553 trusted_groups string list unset main
554 trusted_users string list unset main
555 umask octal-integer 022 pipe
556 unknown_login string unset main
557 unknown_username string unset main
558 unseen boolean false routers 4.00
559 untrusted_set_sender boolean false main 3.20
560 use_bsmtp boolean false appendfile 4.00
562 use_crlf boolean false appendfile 1.89
564 use_fcntl_lock boolean + appendfile 1.70
565 use_flock_lock boolean + appendfile 4.11
566 use_lockfile boolean + appendfile
567 use_mbx_lock boolean + appendfile 2.10
568 use_shell boolean false pipe 1.70
569 user string + routers 4.00
570 unset transports 4.00 replaces individual options
571 uucp_from_pattern string + main 1.75
572 uucp_from_sender string* "$1" main 1.75
573 verify boolean true routers 4.00
574 verify_only boolean false routers 4.00
575 verify_recipient boolean true routers 4.00
576 verify_sender boolean true routers 4.00
577 warn_message_file string unset main 4.00
578 widen_domains string list unset dnslookup 4.00
579 write_rejectlog boolean true main 4.31
583 2. COMMAND LINE OPTIONS
584 -----------------------
586 The table below contains a complete list of all Exim's command line options.
587 Those marked with # are available only to trusted users, those marked with +
588 are available only to admin users, and those marked with * exist only to
589 provide compatibility with Sendmail.
592 --help Give a little help (not a lot)
595 -bdf + Start daemon and run it in the foreground
596 -be Test string expansion
597 -bem Test string expansion, read test message first
598 -bF Test system filter file
599 -bf Test user filter file
600 -bfd Set domain for filter testing
601 -bfl Set local part for filter testing
602 -bfp Set local part prefix for filter testing
603 -bfs Set local part suffix for filter testing
604 -bh Test incoming SMTP call, omitting callouts
605 -bhc Test incoming SMTP call, with callouts
606 -bi * Run <command>bi_command</command>
607 -bm Accept message on standard input
608 -bnq Don't qualify addresses in locally submitted messages
609 -bP Show configuration option settings
611 -bpa + ... with generated addresses as well
612 -bpc + ... but just show a count of messages
613 -bpr + ... do not sort
614 -bpra + ... with generated addresses, unsorted
615 -bpru + ... only undelivered addresses, unsorted
616 -bpu + ... only undelivered addresses
617 -brt Test retry rules
618 -brw Test rewriting rules
619 -bS Read batch SMTP on standard input
620 -bs Run SMTP on standard input and output
621 -bt Test address directing and routing
622 -bV Verify version number
623 -bv Test recipient address verification
624 -bvs Test sender address verification
625 -C + Use alternate configuration file
626 -D + Define macro for configuration file
627 -d + Turn on debugging output
628 -dd + Ditto, but if a daemon, not for subprocesses
629 -dropcr Remove CR character in input: became a no-op in 4.21
631 -ex * Synonym for -oex (for several different x)
632 -F Set calling user name
633 -f # Set calling user address
636 -i Dot does not terminate message
637 -M + Force deliver specific message
638 -Mar + Add recipient to message
639 -MC Internal use only
640 -MCA Internal use only
641 -MCP Internal use only
642 -MCQ Internal use only
643 -MCS Internal use only
644 -MCT Internal use only
645 -Mc + Deliver specific message
646 -Mes + Edit message sender
647 -Mf + Freeze message(s)
648 -Mg + Give up (bounce) message(s)
649 -Mmad + Mark all recipients delivered
650 -Mmd + Mark one recipient delivered
651 -Mrm + Remove message(s) (no bounce)
652 -Mset + Load message's variables when testing with -be
653 -Mt + Thaw message(s)
654 -Mvb + View message body
655 -Mvh + View message header
656 -Mvl + View message log
658 -N + Deliver without transporting
661 -oA * Supply argument for <option>-bi</option>
662 -oB Set max messages down one connection
663 -odb Background delivery
664 -odf Foreground delivery
665 -odi Foreground delivery
666 -odq Queue message; do not deliver
667 -odqs ... do not do SMTP deliveries
668 -oee Error sent by mail; zero return code
669 -oem Error sent by mail; non-zero return code
670 -oep Error written to standard error stream
671 -oeq * Error written to standard error stream
672 -oew * Error sent by mail; non-zero return code
673 -oi Dot does not terminate message
674 -oitrue * Dot does not terminate message
675 -oMa # Supply host address
676 -oMaa # Supply authenticator name
677 -oMai # Supply authenticated id
678 -oMas # Supply authenticated sender
679 -oMi # Supply interface address
680 -oMr # Supply protocol name
681 -oMs # Supply host name
682 -oMt # Supply ident string
685 -oP * Specify path for daemon's pid file
686 -or Timeout non-SMTP messages
687 -os Timeout for SMTP messages
688 -ov * Verbose; same as -v
689 -oX Alternative port for daemon
690 -pd Delay Perl interpreter start
691 -ps Do not delay Perl interpreter start
692 -p<r>:<s> * Same as -oMr <r> -oMs <s>
694 -qf + ... force delivery ) Other combinations are
695 -qff + ... and include frozen messages ) possible. The syntax is
696 -qi + ... initial deliveries only )
697 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
698 -qq + Two-stage queue run )
701 -R Select by recipient in queue run
703 -Rff ... and frozen messages
704 -Rr ... using regular expression
705 -Rrf ... with forcing
706 -Rrff ... and frozen messages
708 -S Select by sender in queue run
710 -Sff ... and frozen messages
711 -Sr ... using regular expression
712 -Srf ... with forcing
713 -Srff ... and frozen messages
714 -Tqt * Used by Exim test suite; not recognized in normal use
715 -t Take recipients from header lines
717 -tls-on-connect Do TLS on startup (for legacy clients)
719 -v Verbose - shows SMTP dialogue and other delivery info
720 -x Ignored (AIX compatibility)
723 3. BUILD TIME OPTIONS FOR EXIM
724 ------------------------------
726 The table below contains a complete list of options that can be set in
727 Local/Makefile when building Exim. More information about individual options
728 can be found in src/EDITME and OS/Makefile-Default.
730 The second column below gives the type of option:
732 . `system' means the option is concerned with the operating system;
734 . `driver' means the option selects a driver to be included in the binary;
736 . `lookup' means the option selects a lookuptype to be included in the binary;
738 . `mandatory' means the option is required to be supplied;
740 . `recommended' means the option is recommended to be supplied;
742 . `optional' means what it says;
744 Those marked with * are specialized and are unlikely to be required in most
745 installations. Those that are marked with ** are commonly set in OS-specific
746 Makefiles. If you use any of these in your Local/Makefile, you may need to
747 reproduce some of the OS-specific settings. For example, in the Makefile for
748 Solaris (which is actually called OS/Makefile-SunOS5), there is
750 LIBS=-lsocket -lnsl -lkstat
752 If you use LIBS to add extra libraries, you must also include the OS ones in
753 your setting. It is better, in this particular case, to use EXTRALIBS, which is
754 empty by default, and is provided for just this reason. Of course, if you do
755 actually want to modify a setting from the OS-specific file, there is nothing
756 to stop you overriding it in your Local/Makefile.
758 Option Type Description
759 ------------------------------------------------------------------------------
761 ALT_CONFIG_PREFIX optional restricts location of -C files
762 ALT_CONFIG_ROOT_ONLY optional* privileged -C needs root (not exim)
763 APPENDFILE_MODE optional*
764 APPENDFILE_DIRECTORY_MODE optional*
765 APPENDFILE_LOCKFILE_MODE optional*
766 AR system command to build a library
767 AUTH_CRAM_MD5 driver include cram_md5 authenticator
768 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
769 AUTH_PLAINTEXT driver include plaintext authenticator
770 AUTH_SPA driver include SPA (NTLM) authenticator
771 AUTH_VARS=3 optional* number of $auth variables
772 BASENAME_COMMAND system** path to basename
773 BASE_62=62 optional* not normally changed for Unix
774 BIN_DIRECTORY mandatory Exim binary directory
775 CC system** C compiler
776 CFLAGS system** flags for C compiler
777 CHGRP_COMMAND system** path to chgrp
778 CHOWN_COMMAND system** path to chown
779 COMPRESS_COMMAND system path to a compress command
780 COMPRESS_SUFFIX system suffix added to compressed files
781 CONFIGURE_FILE mandatory Exim runtime configuration file
782 CONFIGURE_FILE_USE_EUID optional*
783 CONFIGURE_FILE_USE_NODE optional*
784 CONFIGURE_GROUP optional* alternate group for configuration file
785 CONFIGURE_OWNER optional* alternate owner for configuration file
786 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
787 DBMLIB optional** location of DBM library
788 DB_DIRECTORY_MODE optional* mode for hints directory
789 DB_LOCKFILE_MODE optional* mode for hints lock files
790 DB_LOCK_TIMEOUT optional* timeout for hints lock files
791 DB_MODE optional* mode for hints files
792 DEFAULT_CRYPT optional default crypt() function
793 DELIVER_IN_BUFFER_SIZE optional*
794 DELIVER_OUT_BUFFER_SIZE optional*
795 DISABLE_D_OPTION optional disables -D option
796 ERRNO_QUOTA optional* error code for system quota failures
797 EXICYCLOG_MAX optional number of old log files to keep
798 EXIMDB_DIRECTORY_MODE optional* for hints database directory
799 EXIMDB_LOCKFILE_MODE optional* for hints lock files
800 EXIMDB_MODE optional* mode for hints files
801 EXIMON_TEXTPOP system**
803 EXIM_GROUP mandatory group to use for Exim
804 EXIM_MONITOR optional set to eximon.bin to compile
806 EXIM_USER mandatory user to use for Exim
807 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
808 EXIWHAT_KILL_SIGNAL system** -SIGUSER1 or numerical equivalent
809 EXIWHAT_MULTIKILL_CMD system**
810 EXIWHAT_MULTIKILL_ARG system**
811 EXIWHAT_PS_ARG system** to list all processes
812 EXIWHAT_PS_CMD system** path to ps command
813 EXTRALIBS system additional libraries
814 EXTRALIBS_EXIM system additional libraries for Exim only
815 EXTRALIBS_EXIMON system additional libraries for the monitor
816 FIXED_NEVER_USERS optional can't override at runtime
817 HAVE_ICONV system the iconv() function is available
818 HAVE_IPV6 system include IPv6 support
819 HEADERS_CHARSET optional charset for decoded header lines
820 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
821 HEADER_MAXSIZE optional* max memory for message header
822 HOSTNAME_COMMAND system** path to hostname command
823 INCLUDE system path to include files
824 INFO_DIRECTORY optional directory for Info documentation
825 INPUT_DIRECTORY_MODE optional mode for input directory
826 IPV6_INCLUDE system additional includes for IPv6
827 IPV6_LIBS system additional libraries for IPv6
828 LDAP_LIB_TYPE optional type of LDAP library
829 LFLAGS system** link editor flags
830 LIBIDENTCFLAGS system C flags when compiling libident
831 LIBIDENTNAME system name for libident library
832 LIBRESOLV system** library for DNS resolver
833 LIBS system** additional libraries
834 LIBS_EXIM system** additional libraries for Exim ony
835 LIBS_EXIMON system** additional libraries for monitor
836 LOCAL_SCAN_SOURCE optional location of local_scan() source
837 LOG_DIRECTORY_MODE optional mode for log directory
838 LOG_FILE_PATH optional path to log files
839 LOG_MODE optional mode for log files
840 LOOKUP_CDB lookup include cdb lookup
841 LOOKUP_DBM lookup include dbm lookup
842 LOOKUP_DNSDB lookup include dnsdb lookup
843 LOOKUP_DSEARCH lookup include dsearch lookup
844 LOOKUP_INCLUDE lookup include files for lookups
845 LOOKUP_LDAP lookup include ldap lookup
846 LOOKUP_LIBS lookup include libraries for lookups
847 LOOKUP_LSEARCH lookup include all lsearch lookups
848 LOOKUP_MYSQL lookup include mysql lookup
849 LOOKUP_NIS lookup include nis lookup
850 LOOKUP_NISPLUS lookup include nisplus lookup
851 LOOKUP_ORACLE lookup include oracle lookup
852 LOOKUP_PGSQL lookup include pgsql lookup
853 LOOKUP_TESTDB lookup*
854 LOOKUP_WHOSON lookup include whoson lookup
855 MAKE_SHELL optional* shell to use for make
856 MAX_FILTER_SIZE optional* max file size for filter files
857 MAX_INCLUDE_SIZE optional* max file size for :include: files
858 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
859 MAX_NAMED_LIST optional* max named lists of a given type
860 MAX_INTERFACES system maximum network interfaces
861 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
862 MV_COMMAND system path to mv command
863 NO_SYMLINK optional install doesn't make 'exim" symlink
864 PCRE_CFLAGS system compile flags for PCRE library
865 PERL_CC system* compiler for Perl interface code
866 PERL_CCOPTS system* flags for same
867 PERL_COMMAND system path to Perl
868 PERL_LIBS system* library for compiling Perl interface
869 PID_FILE_PATH optional path to daemon's pid file
870 RADIUS_CONFIG_FILE optional path to Radius config file
871 RADIUS_LIB_TYPE optional type of RADIUS library
872 RANLIB system** path to ranlib command
873 RM_COMMAND system path to rm command
874 ROUTER_ACCEPT driver include accept router
875 ROUTER_DNSLOOKUP driver include dnslookup router
876 ROUTER_MANUALROUTE driver include manualroute router
877 ROUTER_IPLITERAL driver include ipliteral router
878 ROUTER_IPLOOKUP driver include iplookup router
879 ROUTER_REDIRECT driver include redirect router
880 ROUTER_QUERYPROGRAM driver include queryprogram router
881 SPOOL_DIRECTORY recommended path to spool directory
882 SPOOL_DIRECTORY_MODE optional mode of spool directory
883 SPOOL_MODE optional mode of spool files
884 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
885 STRIP_COMMAND optional* can be used to strp binaries
886 SUPPORT_A6 optional* support A6 DNS records
887 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
888 SUPPORT_MAILDIR optional support for maildir delivery
889 SUPPORT_MAILSTORE optional support for mailstore delivery
890 SUPPORT_MBX optional support for MBX delivery
891 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
892 SUPPORT_PAM optional support for PAM authentication
893 SUPPORT_TLS optional support for TLS encryption over SMTP
894 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
895 SYSLOG_LOG_PID optional add pid to syslog lines
896 SYSLOG_LONG_LINES optional do not split long syslog lines
897 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
898 TIMEZONE_DEFAULT optional default for timezone option
899 TLS_INCLUDE optional path to include files for TLS
900 TLS_LIBS optional additional libraries for TLS
901 TMPDIR system value for TMPDIR environment variable
902 TRANSPORT_APPENDFILE driver include appendfile transport
903 TRANSPORT_AUTOREPLY driver include autoreply transport
904 TRANSPORT_LMTP driver include lmtp transport
905 TRANSPORT_PIPE driver include pipe transport
906 TRANSPORT_SMTP driver include smtp transport
907 USE_DB system** use native DB interface
908 USE_GNUTLS optional use GnuTLS instead of OpenSSL
909 USE_READLINE optional try to load libreadline for -be
910 USE_TCP_WRAPPERS system link with tcpwrappers
911 USE_TDB optional use the tdb DB interface
912 X11 system** X11 base directory
913 X11_LD_LIB system** X11 link library
914 XINCLUDE system** X11 include directory
915 XLFLAGS system** X11 link time flags
916 ZCAT_COMMAND system path to zcat command
919 4. BUILD TIME OPTIONS FOR EXIMON
920 --------------------------------
922 The table below contains a complete list of options that can be set in
923 Local/eximon.conf when building the Exim monitor. Where the default is shown as
924 ** it means that the text string is too long to fit in the table and is instead
925 given below. A blank default means that there is no default value.
927 ACTION_OUTPUT=no show output for every action
928 ACTION_QUEUE_UPDATE=yes update queue display after actions
929 BODY_MAX=20000 maximum body display
930 DOMAIN= domain to strip from window title
931 LOG_BUFFER=20K buffer for log tail
932 LOG_DEPTH=300 depth of log subwindow
933 LOG_FONT=** font for log display
934 LOG_STRIPCHARTS=** patterns for stripcharts
935 LOG_WIDTH=950 width of log subwindow
936 MENU_EVENT='Shift<Btn1Down>' keypress for menu
937 MIN_HEIGHT=162 minimum window height
938 MIN_WIDTH=103 minimum window width
939 QUALIFY_DOMAIN= local domain to strip from addresses
940 QUEUE_DEPTH=200 depth of queue subwindow
941 QUEUE_FONT=$LOG_FONT font for queue display
942 QUEUE_INTERVAL=300 queue refresh interval
943 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
944 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
945 QUEUE_WIDTH=950 width of queue subwindow
946 SIZE_STRIPCHART= request partition size stripchart
947 SIZE_STRIPCHART_NAME=space name for size stripchart
948 START_SMALL=no if yes, start with small window
949 STRIPCHART_INTERVAL=60 stripchart refresh interval
950 TEXT_DEPTH=200 depth of text windows
951 WINDOW_TITLE="${hostname} eximon" window title
953 The default for LOG_FONT is
955 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
957 and the default for LOG_STRIPCHARTS is
959 LOG_STRIPCHARTS='/ <= /in/
961 / => .+ R=local/local/
962 / => .+ T=[^ ]*smtp/smtp/'
964 That is, there are four stripcharts, named in, out, local, and smtp. The first
965 counts message arrivals, the second counts all deliveries, the third counts
966 deliveries where the router's name starts with "local", and the fourth counts
967 deliveries where the transport name contains "smtp".
969 **** End of OptionLists ****
git://git.exim.org / exim.git / blob