1 /*************************************************
2 * Exim - an Internet mail transport agent *
3 *************************************************/
5 /* Copyright (c) University of Cambridge 1995 - 2018 */
6 /* Copyright (c) The Exim Maintainers 2020 */
7 /* See the file NOTICE for conditions of use and distribution. */
9 /* Code for receiving a message and setting up spool files. */
14 #ifdef EXPERIMENTAL_DCC
22 /*************************************************
23 * Local static variables *
24 *************************************************/
26 static int data_fd = -1;
27 static uschar *spool_name = US"";
29 enum CH_STATE {LF_SEEN, MID_LINE, CR_SEEN};
31 #ifdef HAVE_LOCAL_SCAN
32 jmp_buf local_scan_env; /* error-handling context for local_scan */
33 unsigned had_local_scan_crash;
34 unsigned had_local_scan_timeout;
38 /*************************************************
39 * Non-SMTP character reading functions *
40 *************************************************/
42 /* These are the default functions that are set up in the variables such as
43 receive_getc initially. They just call the standard functions, passing stdin as
44 the file. (When SMTP input is occurring, different functions are used by
45 changing the pointer variables.) */
48 stdin_getc(unsigned lim)
54 fprintf(stderr, "exim: timed out while reading - message abandoned\n");
55 log_write(L_lost_incoming_connection,
56 LOG_MAIN, "timed out while reading local message");
57 receive_bomb_out(US"data-timeout", NULL); /* Does not return */
61 if (filter_test == FTEST_NONE)
63 fprintf(stderr, "\nexim: %s received - message abandoned\n",
64 had_data_sigint == SIGTERM ? "SIGTERM" : "SIGINT");
65 log_write(0, LOG_MAIN, "%s received while reading local message",
66 had_data_sigint == SIGTERM ? "SIGTERM" : "SIGINT");
68 receive_bomb_out(US"signal-exit", NULL); /* Does not return */
76 return ungetc(c, stdin);
94 /*************************************************
95 * Check that a set sender is allowed *
96 *************************************************/
98 /* This function is called when a local caller sets an explicit sender address.
99 It checks whether this is permitted, which it is for trusted callers.
100 Otherwise, it must match the pattern(s) in untrusted_set_sender.
102 Arguments: the proposed sender address
103 Returns: TRUE for a trusted caller
104 TRUE if the address has been set, untrusted_set_sender has been
105 set, and the address matches something in the list
110 receive_check_set_sender(uschar *newsender)
113 if (f.trusted_caller) return TRUE;
114 if (!newsender || !untrusted_set_sender) return FALSE;
115 qnewsender = Ustrchr(newsender, '@')
116 ? newsender : string_sprintf("%s@%s", newsender, qualify_domain_sender);
117 return match_address_list_basic(qnewsender, CUSS &untrusted_set_sender, 0) == OK;
123 /*************************************************
124 * Read space info for a partition *
125 *************************************************/
127 /* This function is called by receive_check_fs() below, and also by string
128 expansion for variables such as $spool_space. The field names for the statvfs
129 structure are macros, because not all OS have F_FAVAIL and it seems tidier to
130 have macros for F_BAVAIL and F_FILES as well. Some kinds of file system do not
131 have inodes, and they return -1 for the number available.
133 Later: It turns out that some file systems that do not have the concept of
134 inodes return 0 rather than -1. Such systems should also return 0 for the total
135 number of inodes, so we require that to be greater than zero before returning
139 isspool TRUE for spool partition, FALSE for log partition
140 inodeptr address of int to receive inode count; -1 if there isn't one
142 Returns: available on-root space, in kilobytes
143 -1 for log partition if there isn't one
145 All values are -1 if the STATFS functions are not available.
149 receive_statvfs(BOOL isspool, int *inodeptr)
152 struct STATVFS statbuf;
158 /* The spool directory must always exist. */
162 path = spool_directory;
166 /* Need to cut down the log file path to the directory, and to ignore any
167 appearance of "syslog" in it. */
171 int sep = ':'; /* Not variable - outside scripts use */
172 const uschar *p = log_file_path;
175 /* An empty log_file_path means "use the default". This is the same as an
176 empty item in a list. */
178 if (*p == 0) p = US":";
179 while ((path = string_nextinlist(&p, &sep, buffer, sizeof(buffer))))
180 if (Ustrcmp(path, "syslog") != 0)
183 if (path == NULL) /* No log files */
189 /* An empty string means use the default, which is in the spool directory.
190 But don't just use the spool directory, as it is possible that the log
191 subdirectory has been symbolically linked elsewhere. */
195 sprintf(CS buffer, CS"%s/log", CS spool_directory);
201 if ((cp = Ustrrchr(path, '/')) != NULL) *cp = 0;
205 /* We now have the path; do the business */
207 memset(&statbuf, 0, sizeof(statbuf));
209 if (STATVFS(CS path, &statbuf) != 0)
210 if (stat(CS path, &dummy) == -1 && errno == ENOENT)
211 { /* Can happen on first run after installation */
217 log_write(0, LOG_MAIN|LOG_PANIC, "cannot accept message: failed to stat "
218 "%s directory %s: %s", name, path, strerror(errno));
219 smtp_closedown(US"spool or log directory problem");
220 exim_exit(EXIT_FAILURE);
223 *inodeptr = (statbuf.F_FILES > 0)? statbuf.F_FAVAIL : -1;
225 /* Disks are getting huge. Take care with computing the size in kilobytes. */
227 return (int_eximarith_t)(((double)statbuf.F_BAVAIL * (double)statbuf.F_FRSIZE)/1024.0);
230 /* Unable to find partition sizes in this environment. */
240 /*************************************************
241 * Check space on spool and log partitions *
242 *************************************************/
244 /* This function is called before accepting a message; if any thresholds are
245 set, it checks them. If a message_size is supplied, it checks that there is
246 enough space for that size plus the threshold - i.e. that the message won't
247 reduce the space to the threshold. Not all OS have statvfs(); for those that
248 don't, this function always returns TRUE. For some OS the old function and
249 struct name statfs is used; that is handled by a macro, defined in exim.h.
252 msg_size the (estimated) size of an incoming message
254 Returns: FALSE if there isn't enough space, or if the information cannot
256 TRUE if no check was done or there is enough space
260 receive_check_fs(int msg_size)
262 int_eximarith_t space;
265 if (check_spool_space > 0 || msg_size > 0 || check_spool_inodes > 0)
267 space = receive_statvfs(TRUE, &inodes);
270 debug_printf("spool directory space = " PR_EXIM_ARITH "K inodes = %d "
271 "check_space = " PR_EXIM_ARITH "K inodes = %d msg_size = %d\n",
272 space, inodes, check_spool_space, check_spool_inodes, msg_size);
274 if ( space >= 0 && space + msg_size / 1024 < check_spool_space
275 || inodes >= 0 && inodes < check_spool_inodes)
277 log_write(0, LOG_MAIN, "spool directory space check failed: space="
278 PR_EXIM_ARITH " inodes=%d", space, inodes);
283 if (check_log_space > 0 || check_log_inodes > 0)
285 space = receive_statvfs(FALSE, &inodes);
288 debug_printf("log directory space = " PR_EXIM_ARITH "K inodes = %d "
289 "check_space = " PR_EXIM_ARITH "K inodes = %d\n",
290 space, inodes, check_log_space, check_log_inodes);
292 if ( space >= 0 && space < check_log_space
293 || inodes >= 0 && inodes < check_log_inodes)
295 log_write(0, LOG_MAIN, "log directory space check failed: space=" PR_EXIM_ARITH
296 " inodes=%d", space, inodes);
306 /*************************************************
307 * Bomb out while reading a message *
308 *************************************************/
310 /* The common case of wanting to bomb out is if a SIGTERM or SIGINT is
311 received, or if there is a timeout. A rarer case might be if the log files are
312 screwed up and Exim can't open them to record a message's arrival. Handling
313 that case is done by setting a flag to cause the log functions to call this
314 function if there is an ultimate disaster. That is why it is globally
318 reason text reason to pass to the not-quit ACL
319 msg default SMTP response to give if in an SMTP session
324 receive_bomb_out(uschar *reason, uschar *msg)
326 static BOOL already_bombing_out;
327 /* The smtp_notquit_exit() below can call ACLs which can trigger recursive
328 timeouts, if someone has something slow in their quit ACL. Since the only
329 things we should be doing are to close down cleanly ASAP, on the second
330 pass we also close down stuff that might be opened again, before bypassing
331 the ACL call and exiting. */
333 /* If spool_name is set, it contains the name of the data file that is being
334 written. Unlink it before closing so that it cannot be picked up by a delivery
335 process. Ensure that any header file is also removed. */
337 if (spool_name[0] != '\0')
340 spool_name[Ustrlen(spool_name) - 1] = 'H';
342 spool_name[0] = '\0';
345 /* Now close the file if it is open, either as a fd or a stream. */
349 (void)fclose(spool_data_file);
350 spool_data_file = NULL;
352 else if (data_fd >= 0)
354 (void)close(data_fd);
358 /* Attempt to close down an SMTP connection tidily. For non-batched SMTP, call
359 smtp_notquit_exit(), which runs the NOTQUIT ACL, if present, and handles the
362 if (!already_bombing_out)
364 already_bombing_out = TRUE;
367 if (smtp_batched_input)
368 moan_smtp_batch(NULL, "421 %s - message abandoned", msg); /* No return */
369 smtp_notquit_exit(reason, US"421", US"%s %s - closing connection.",
370 smtp_active_hostname, msg);
374 /* Exit from the program (non-BSMTP cases) */
376 exim_exit(EXIT_FAILURE);
380 /*************************************************
381 * Data read timeout *
382 *************************************************/
384 /* Handler function for timeouts that occur while reading the data that
387 Argument: the signal number
392 data_timeout_handler(int sig)
394 had_data_timeout = sig;
399 #ifdef HAVE_LOCAL_SCAN
400 /*************************************************
401 * local_scan() timeout *
402 *************************************************/
404 /* Handler function for timeouts that occur while running a local_scan()
405 function. Posix recommends against calling longjmp() from a signal-handler,
406 but the GCC manual says you can so we will, and trust that it's better than
407 calling probably non-signal-safe funxtions during logging from within the
408 handler, even with other compilers.
410 See also https://cwe.mitre.org/data/definitions/745.html which also lists
413 This is all because we have no control over what might be written for a
414 local-scan function, so cannot sprinkle had-signal checks after each
415 call-site. At least with the default "do-nothing" function we won't
418 Argument: the signal number
423 local_scan_timeout_handler(int sig)
425 had_local_scan_timeout = sig;
426 siglongjmp(local_scan_env, 1);
431 /*************************************************
432 * local_scan() crashed *
433 *************************************************/
435 /* Handler function for signals that occur while running a local_scan()
438 Argument: the signal number
443 local_scan_crash_handler(int sig)
445 had_local_scan_crash = sig;
446 siglongjmp(local_scan_env, 1);
449 #endif /*HAVE_LOCAL_SCAN*/
452 /*************************************************
453 * SIGTERM or SIGINT received *
454 *************************************************/
456 /* Handler for SIGTERM or SIGINT signals that occur while reading the
457 data that comprises a message.
459 Argument: the signal number
464 data_sigterm_sigint_handler(int sig)
466 had_data_sigint = sig;
471 /*************************************************
472 * Add new recipient to list *
473 *************************************************/
475 /* This function builds a list of recipient addresses in argc/argv
479 recipient the next address to add to recipients_list
480 pno parent number for fixed aliases; -1 otherwise
486 receive_add_recipient(uschar *recipient, int pno)
488 if (recipients_count >= recipients_list_max)
490 recipient_item *oldlist = recipients_list;
491 int oldmax = recipients_list_max;
493 const int safe_recipients_limit = INT_MAX / 2 / sizeof(recipient_item);
494 if (recipients_list_max < 0 || recipients_list_max >= safe_recipients_limit)
496 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Too many recipients: %d", recipients_list_max);
499 recipients_list_max = recipients_list_max ? 2*recipients_list_max : 50;
500 recipients_list = store_get(recipients_list_max * sizeof(recipient_item), FALSE);
502 memcpy(recipients_list, oldlist, oldmax * sizeof(recipient_item));
505 recipients_list[recipients_count].address = recipient;
506 recipients_list[recipients_count].pno = pno;
507 #ifdef EXPERIMENTAL_BRIGHTMAIL
508 recipients_list[recipients_count].bmi_optin = bmi_current_optin;
509 /* reset optin string pointer for next recipient */
510 bmi_current_optin = NULL;
512 recipients_list[recipients_count].orcpt = NULL;
513 recipients_list[recipients_count].dsn_flags = 0;
514 recipients_list[recipients_count++].errors_to = NULL;
520 /*************************************************
521 * Send user response message *
522 *************************************************/
524 /* This function is passed a default response code and a user message. It calls
525 smtp_message_code() to check and possibly modify the response code, and then
526 calls smtp_respond() to transmit the response. I put this into a function
527 just to avoid a lot of repetition.
530 code the response code
531 user_msg the user message
538 smtp_user_msg(uschar *code, uschar *user_msg)
541 smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
542 smtp_respond(code, len, TRUE, user_msg);
550 /*************************************************
551 * Remove a recipient from the list *
552 *************************************************/
554 /* This function is provided for local_scan() to use.
557 recipient address to remove
559 Returns: TRUE if it did remove something; FALSE otherwise
563 receive_remove_recipient(uschar *recipient)
565 DEBUG(D_receive) debug_printf("receive_remove_recipient(\"%s\") called\n",
567 for (int count = 0; count < recipients_count; count++)
568 if (Ustrcmp(recipients_list[count].address, recipient) == 0)
570 if ((--recipients_count - count) > 0)
571 memmove(recipients_list + count, recipients_list + count + 1,
572 (recipients_count - count)*sizeof(recipient_item));
582 /* Pause for a while waiting for input. If none received in that time,
583 close the logfile, if we had one open; then if we wait for a long-running
584 datasource (months, in one use-case) log rotation will not leave us holding
590 if (!receive_timeout)
593 timesince(&t, &received_time);
594 if (t.tv_sec > 30*60)
599 FD_ZERO(&r); FD_SET(0, &r);
600 t.tv_sec = 30*60 - t.tv_sec; t.tv_usec = 0;
601 if (select(1, &r, NULL, NULL, &t) == 0) mainlog_close();
606 /*************************************************
607 * Read data portion of a non-SMTP message *
608 *************************************************/
610 /* This function is called to read the remainder of a message (following the
611 header) when the input is not from SMTP - we are receiving a local message on
612 a standard input stream. The message is always terminated by EOF, and is also
613 terminated by a dot on a line by itself if the flag dot_ends is TRUE. Split the
614 two cases for maximum efficiency.
616 Ensure that the body ends with a newline. This will naturally be the case when
617 the termination is "\n.\n" but may not be otherwise. The RFC defines messages
618 as "sequences of lines" - this of course strictly applies only to SMTP, but
619 deliveries into BSD-type mailbox files also require it. Exim used to have a
620 flag for doing this at delivery time, but as it was always set for all
621 transports, I decided to simplify things by putting the check here instead.
623 There is at least one MUA (dtmail) that sends CRLF via this interface, and
624 other programs are known to do this as well. Exim used to have a option for
625 dealing with this: in July 2003, after much discussion, the code has been
626 changed to default to treat any of LF, CRLF, and bare CR as line terminators.
628 However, for the case when a dot on a line by itself terminates a message, the
629 only recognized terminating sequences before and after the dot are LF and CRLF.
630 Otherwise, having read EOL . CR, you don't know whether to read another
633 Internally, in messages stored in Exim's spool files, LF is used as the line
634 terminator. Under the new regime, bare CRs will no longer appear in these
638 fout a FILE to which to write the message
640 Returns: One of the END_xxx values indicating why it stopped reading
644 read_message_data(FILE *fout)
648 register int linelength = 0;
650 /* Handle the case when only EOF terminates the message */
656 /*XXX we do a gettimeofday before checking for every received char,
657 which is hardly clever. The function-indirection doesn't help, but
658 an additional function to check for nonempty read buffer would help.
659 See stdin_getc() / smtp_getc() / tls_getc() / bdat_getc(). */
662 log_close_chk(), (ch = (receive_getc)(GETC_BUFFER_UNLIMITED)) != EOF;
665 if (ch == 0) body_zerocount++;
666 if (last_ch == '\r' && ch != '\n')
668 if (linelength > max_received_linelength)
669 max_received_linelength = linelength;
671 if (fputc('\n', fout) == EOF) return END_WERROR;
675 if (ch == '\r') continue;
677 if (fputc(ch, fout) == EOF) return END_WERROR;
680 if (linelength > max_received_linelength)
681 max_received_linelength = linelength;
686 if (++message_size > thismessage_size_limit) return END_SIZE;
691 if (linelength > max_received_linelength)
692 max_received_linelength = linelength;
693 if (fputc('\n', fout) == EOF) return END_WERROR;
701 /* Handle the case when a dot on a line on its own, or EOF, terminates. */
705 while (log_close_chk(), (ch = (receive_getc)(GETC_BUFFER_UNLIMITED)) != EOF)
707 if (ch == 0) body_zerocount++;
710 case 0: /* Normal state (previous char written) */
714 if (linelength > max_received_linelength)
715 max_received_linelength = linelength;
720 { ch_state = 2; continue; }
723 case 1: /* After written "\n" */
724 if (ch == '.') { ch_state = 3; continue; }
725 if (ch == '\r') { ch_state = 2; continue; }
726 if (ch == '\n') { body_linecount++; linelength = -1; }
731 body_linecount++; /* After unwritten "\r" */
732 if (linelength > max_received_linelength)
733 max_received_linelength = linelength;
741 if (message_size++, fputc('\n', fout) == EOF) return END_WERROR;
742 if (ch == '\r') continue;
748 case 3: /* After "\n." (\n written, dot not) */
749 if (ch == '\n') return END_DOT;
750 if (ch == '\r') { ch_state = 4; continue; }
753 if (fputc('.', fout) == EOF) return END_WERROR;
757 case 4: /* After "\n.\r" (\n written, rest not) */
758 if (ch == '\n') return END_DOT;
761 if (fputs(".\n", fout) == EOF) return END_WERROR;
762 if (ch == '\r') { ch_state = 2; continue; }
768 if (fputc(ch, fout) == EOF) return END_WERROR;
769 if (++message_size > thismessage_size_limit) return END_SIZE;
772 /* Get here if EOF read. Unless we have just written "\n", we need to ensure
773 the message ends with a newline, and we must also write any characters that
774 were saved up while testing for an ending dot. */
778 static uschar *ends[] = { US"\n", NULL, US"\n", US".\n", US".\n" };
779 if (fputs(CS ends[ch_state], fout) == EOF) return END_WERROR;
780 message_size += Ustrlen(ends[ch_state]);
790 /*************************************************
791 * Read data portion of an SMTP message *
792 *************************************************/
794 /* This function is called to read the remainder of an SMTP message (after the
795 headers), or to skip over it when an error has occurred. In this case, the
796 output file is passed as NULL.
798 If any line begins with a dot, that character is skipped. The input should only
799 be successfully terminated by CR LF . CR LF unless it is local (non-network)
800 SMTP, in which case the CRs are optional, but...
802 FUDGE: It seems that sites on the net send out messages with just LF
803 terminators, despite the warnings in the RFCs, and other MTAs handle this. So
804 we make the CRs optional in all cases.
806 July 2003: Bare CRs cause trouble. We now treat them as line terminators as
807 well, so that there are no CRs in spooled messages. However, the message
808 terminating dot is not recognized between two bare CRs.
811 fout a FILE to which to write the message; NULL if skipping
813 Returns: One of the END_xxx values indicating why it stopped reading
817 read_message_data_smtp(FILE *fout)
823 while ((ch = (receive_getc)(GETC_BUFFER_UNLIMITED)) != EOF)
825 if (ch == 0) body_zerocount++;
828 case 0: /* After LF or CRLF */
832 continue; /* Don't ever write . after LF */
836 /* Else fall through to handle as normal uschar. */
838 case 1: /* Normal state */
843 if (linelength > max_received_linelength)
844 max_received_linelength = linelength;
854 case 2: /* After (unwritten) CR */
856 if (linelength > max_received_linelength)
857 max_received_linelength = linelength;
866 if (fout != NULL && fputc('\n', fout) == EOF) return END_WERROR;
867 cutthrough_data_put_nl();
868 if (ch != '\r') ch_state = 1; else continue;
872 case 3: /* After [CR] LF . */
880 /* The dot was removed at state 3. For a doubled dot, here, reinstate
881 it to cutthrough. The current ch, dot or not, is passed both to cutthrough
882 and to file below. */
886 cutthrough_data_puts(&c, 1);
891 case 4: /* After [CR] LF . CR */
892 if (ch == '\n') return END_DOT;
895 if (fout != NULL && fputc('\n', fout) == EOF) return END_WERROR;
896 cutthrough_data_put_nl();
906 /* Add the character to the spool file, unless skipping; then loop for the
913 if (fputc(ch, fout) == EOF) return END_WERROR;
914 if (message_size > thismessage_size_limit) return END_SIZE;
917 cutthrough_data_put_nl();
921 cutthrough_data_puts(&c, 1);
925 /* Fall through here if EOF encountered. This indicates some kind of error,
926 since a correct message is terminated by [CR] LF . [CR] LF. */
934 /* Variant of the above read_message_data_smtp() specialised for RFC 3030
935 CHUNKING. Accept input lines separated by either CRLF or CR or LF and write
936 LF-delimited spoolfile. Until we have wireformat spoolfiles, we need the
937 body_linecount accounting for proper re-expansion for the wire, so use
938 a cut-down version of the state-machine above; we don't need to do leading-dot
939 detection and unstuffing.
942 fout a FILE to which to write the message; NULL if skipping;
943 must be open for both writing and reading.
945 Returns: One of the END_xxx values indicating why it stopped reading
949 read_message_bdat_smtp(FILE *fout)
951 int linelength = 0, ch;
952 enum CH_STATE ch_state = LF_SEEN;
957 switch ((ch = bdat_getc(GETC_BUFFER_UNLIMITED)))
959 case EOF: return END_EOF;
960 case ERR: return END_PROTOCOL;
962 /* Nothing to get from the sender anymore. We check the last
963 character written to the spool.
965 RFC 3030 states, that BDAT chunks are normal text, terminated by CRLF.
966 If we would be strict, we would refuse such broken messages.
967 But we are liberal, so we fix it. It would be easy just to append
968 the "\n" to the spool.
970 But there are some more things (line counting, message size calculation and such),
971 that would need to be duplicated here. So we simply do some ungetc
976 if (fseek(fout, -1, SEEK_CUR) < 0) return END_PROTOCOL;
977 if (fgetc(fout) == '\n') return END_DOT;
980 if (linelength == -1) /* \r already seen (see below) */
982 DEBUG(D_receive) debug_printf("Add missing LF\n");
986 DEBUG(D_receive) debug_printf("Add missing CRLF\n");
987 bdat_ungetc('\r'); /* not even \r was seen */
991 case '\0': body_zerocount++; break;
995 case LF_SEEN: /* After LF or CRLF */
997 /* fall through to handle as normal uschar. */
999 case MID_LINE: /* Mid-line state */
1004 if (linelength > max_received_linelength)
1005 max_received_linelength = linelength;
1008 else if (ch == '\r')
1011 if (fix_nl) bdat_ungetc('\n');
1012 continue; /* don't write CR */
1016 case CR_SEEN: /* After (unwritten) CR */
1018 if (linelength > max_received_linelength)
1019 max_received_linelength = linelength;
1026 if (fout && fputc('\n', fout) == EOF) return END_WERROR;
1027 cutthrough_data_put_nl();
1028 if (ch == '\r') continue; /* don't write CR */
1029 ch_state = MID_LINE;
1034 /* Add the character to the spool file, unless skipping */
1040 if (fputc(ch, fout) == EOF) return END_WERROR;
1041 if (message_size > thismessage_size_limit) return END_SIZE;
1044 cutthrough_data_put_nl();
1048 cutthrough_data_puts(&c, 1);
1055 read_message_bdat_smtp_wire(FILE *fout)
1059 /* Remember that this message uses wireformat. */
1061 DEBUG(D_receive) debug_printf("CHUNKING: %s\n",
1062 fout ? "writing spoolfile in wire format" : "flushing input");
1063 f.spool_file_wireformat = TRUE;
1067 if (chunking_data_left > 0)
1069 unsigned len = MAX(chunking_data_left, thismessage_size_limit - message_size + 1);
1070 uschar * buf = bdat_getbuf(&len);
1072 if (!buf) return END_EOF;
1073 message_size += len;
1074 if (fout && fwrite(buf, len, 1, fout) != 1) return END_WERROR;
1076 else switch (ch = bdat_getc(GETC_BUFFER_UNLIMITED))
1078 case EOF: return END_EOF;
1079 case EOD: return END_DOT;
1080 case ERR: return END_PROTOCOL;
1086 max_received_linelength
1090 if (fout && fputc(ch, fout) == EOF) return END_WERROR;
1093 if (message_size > thismessage_size_limit) return END_SIZE;
1101 /*************************************************
1102 * Swallow SMTP message *
1103 *************************************************/
1105 /* This function is called when there has been some kind of error while reading
1106 an SMTP message, and the remaining data may need to be swallowed. It is global
1107 because it is called from smtp_closedown() to shut down an incoming call
1110 Argument: a FILE from which to read the message
1115 receive_swallow_smtp(void)
1117 if (message_ended >= END_NOTENDED)
1118 message_ended = chunking_state <= CHUNKING_OFFERED
1119 ? read_message_data_smtp(NULL)
1120 : read_message_bdat_smtp_wire(NULL);
1125 /*************************************************
1126 * Handle lost SMTP connection *
1127 *************************************************/
1129 /* This function logs connection loss incidents and generates an appropriate
1132 Argument: additional data for the message
1133 Returns: the SMTP response
1137 handle_lost_connection(uschar *s)
1139 log_write(L_lost_incoming_connection | L_smtp_connection, LOG_MAIN,
1140 "%s lost while reading message data%s", smtp_get_connection_info(), s);
1141 smtp_notquit_exit(US"connection-lost", NULL, NULL);
1142 return US"421 Lost incoming connection";
1148 /*************************************************
1149 * Handle a non-smtp reception error *
1150 *************************************************/
1152 /* This function is called for various errors during the reception of non-SMTP
1153 messages. It either sends a message to the sender of the problem message, or it
1154 writes to the standard error stream.
1157 errcode code for moan_to_sender(), identifying the error
1158 text1 first message text, passed to moan_to_sender()
1159 text2 second message text, used only for stderrr
1160 error_rc code to pass to exim_exit if no problem
1161 f FILE containing body of message (may be stdin)
1162 hptr pointer to instore headers or NULL
1164 Returns: calls exim_exit(), which does not return
1168 give_local_error(int errcode, uschar *text1, uschar *text2, int error_rc,
1169 FILE *f, header_line *hptr)
1171 if (error_handling == ERRORS_SENDER)
1175 eblock.text1 = text1;
1176 eblock.text2 = US"";
1177 if (!moan_to_sender(errcode, &eblock, hptr, f, FALSE))
1178 error_rc = EXIT_FAILURE;
1181 fprintf(stderr, "exim: %s%s\n", text2, text1); /* Sic */
1183 exim_exit(error_rc);
1188 /*************************************************
1189 * Add header lines set up by ACL *
1190 *************************************************/
1192 /* This function is called to add the header lines that were set up by
1193 statements in an ACL to the list of headers in memory. It is done in two stages
1194 like this, because when the ACL for RCPT is running, the other headers have not
1195 yet been received. This function is called twice; once just before running the
1196 DATA ACL, and once after. This is so that header lines added by MAIL or RCPT
1197 are visible to the DATA ACL.
1199 Originally these header lines were added at the end. Now there is support for
1200 three different places: top, bottom, and after the Received: header(s). There
1201 will always be at least one Received: header, even if it is marked deleted, and
1202 even if something else has been put in front of it.
1205 acl_name text to identify which ACL
1211 add_acl_headers(int where, uschar *acl_name)
1213 header_line *last_received = NULL;
1217 case ACL_WHERE_DKIM:
1218 case ACL_WHERE_MIME:
1219 case ACL_WHERE_DATA:
1220 if ( cutthrough.cctx.sock >= 0 && cutthrough.delivery
1221 && (acl_removed_headers || acl_added_headers))
1223 log_write(0, LOG_MAIN|LOG_PANIC, "Header modification in data ACLs"
1224 " will not take effect on cutthrough deliveries");
1229 if (acl_removed_headers)
1231 DEBUG(D_receive|D_acl) debug_printf_indent(">>Headers removed by %s ACL:\n", acl_name);
1233 for (header_line * h = header_list; h; h = h->next) if (h->type != htype_old)
1235 const uschar * list = acl_removed_headers;
1236 int sep = ':'; /* This is specified as a colon-separated list */
1240 while ((s = string_nextinlist(&list, &sep, buffer, sizeof(buffer))))
1241 if (header_testname(h, s, Ustrlen(s), FALSE))
1243 h->type = htype_old;
1244 DEBUG(D_receive|D_acl) debug_printf_indent(" %s", h->text);
1247 acl_removed_headers = NULL;
1248 DEBUG(D_receive|D_acl) debug_printf_indent(">>\n");
1251 if (!acl_added_headers) return;
1252 DEBUG(D_receive|D_acl) debug_printf_indent(">>Headers added by %s ACL:\n", acl_name);
1254 for (header_line * h = acl_added_headers, * next; h; h = next)
1261 h->next = header_list;
1263 DEBUG(D_receive|D_acl) debug_printf_indent(" (at top)");
1269 last_received = header_list;
1270 while (!header_testname(last_received, US"Received", 8, FALSE))
1271 last_received = last_received->next;
1272 while (last_received->next &&
1273 header_testname(last_received->next, US"Received", 8, FALSE))
1274 last_received = last_received->next;
1276 h->next = last_received->next;
1277 last_received->next = h;
1278 DEBUG(D_receive|D_acl) debug_printf_indent(" (after Received:)");
1282 /* add header before any header which is NOT Received: or Resent- */
1283 last_received = header_list;
1284 while ( last_received->next &&
1285 ( (header_testname(last_received->next, US"Received", 8, FALSE)) ||
1286 (header_testname_incomplete(last_received->next, US"Resent-", 7, FALSE)) ) )
1287 last_received = last_received->next;
1288 /* last_received now points to the last Received: or Resent-* header
1289 in an uninterrupted chain of those header types (seen from the beginning
1290 of all headers. Our current header must follow it. */
1291 h->next = last_received->next;
1292 last_received->next = h;
1293 DEBUG(D_receive|D_acl) debug_printf_indent(" (before any non-Received: or Resent-*: header)");
1298 header_last->next = h;
1299 DEBUG(D_receive|D_acl) debug_printf_indent(" ");
1303 if (!h->next) header_last = h;
1305 /* Check for one of the known header types (From:, To:, etc.) though in
1306 practice most added headers are going to be "other". Lower case
1307 identification letters are never stored with the header; they are used
1308 for existence tests when messages are received. So discard any lower case
1311 h->type = header_checkname(h, FALSE);
1312 if (h->type >= 'a') h->type = htype_other;
1314 DEBUG(D_receive|D_acl) debug_printf("%s", h->text);
1317 acl_added_headers = NULL;
1318 DEBUG(D_receive|D_acl) debug_printf_indent(">>\n");
1323 /*************************************************
1324 * Add host information for log line *
1325 *************************************************/
1327 /* Called for acceptance and rejecting log lines. This adds information about
1328 the calling host to a string that is being built dynamically.
1331 s the dynamic string
1333 Returns: the extended string
1337 add_host_info_for_log(gstring * g)
1339 if (sender_fullhost)
1341 if (LOGGING(dnssec) && sender_host_dnssec) /*XXX sender_helo_dnssec? */
1342 g = string_catn(g, US" DS", 3);
1343 g = string_append(g, 2, US" H=", sender_fullhost);
1344 if (LOGGING(incoming_interface) && interface_address)
1345 g = string_fmt_append(g, " I=[%s]:%d", interface_address, interface_port);
1347 if (f.tcp_in_fastopen && !f.tcp_in_fastopen_logged)
1349 g = string_catn(g, US" TFO*", f.tcp_in_fastopen_data ? 5 : 4);
1350 f.tcp_in_fastopen_logged = TRUE;
1353 g = string_append(g, 2, US" U=", sender_ident);
1354 if (received_protocol)
1355 g = string_append(g, 2, US" P=", received_protocol);
1356 if (LOGGING(pipelining) && f.smtp_in_pipelining_advertised)
1358 g = string_catn(g, US" L", 2);
1359 #ifndef DISABLE_PIPE_CONNECT
1360 if (f.smtp_in_early_pipe_used)
1361 g = string_catn(g, US"*", 1);
1362 else if (f.smtp_in_early_pipe_advertised)
1363 g = string_catn(g, US".", 1);
1365 if (!f.smtp_in_pipelining_used)
1366 g = string_catn(g, US"-", 1);
1373 #ifdef WITH_CONTENT_SCAN
1375 /*************************************************
1376 * Run the MIME ACL on a message *
1377 *************************************************/
1379 /* This code is in a subroutine so that it can be used for both SMTP
1380 and non-SMTP messages. It is called with a non-NULL ACL pointer.
1383 acl The ACL to run (acl_smtp_mime or acl_not_smtp_mime)
1384 smtp_yield_ptr Set FALSE to kill messages after dropped connection
1385 smtp_reply_ptr Where SMTP reply is being built
1386 blackholed_by_ptr Where "blackholed by" message is being built
1388 Returns: TRUE to carry on; FALSE to abandon the message
1392 run_mime_acl(uschar *acl, BOOL *smtp_yield_ptr, uschar **smtp_reply_ptr,
1393 uschar **blackholed_by_ptr)
1396 uschar * rfc822_file_path = NULL;
1397 unsigned long mbox_size;
1398 uschar *user_msg, *log_msg;
1399 int mime_part_count_buffer = -1;
1400 uschar * mbox_filename;
1403 /* check if it is a MIME message */
1405 for (header_line * my_headerlist = header_list; my_headerlist;
1406 my_headerlist = my_headerlist->next)
1407 if ( my_headerlist->type != '*' /* skip deleted headers */
1408 && strncmpic(my_headerlist->text, US"Content-Type:", 13) == 0
1411 DEBUG(D_receive) debug_printf("Found Content-Type: header - executing acl_smtp_mime.\n");
1415 DEBUG(D_receive) debug_printf("No Content-Type: header - presumably not a MIME message.\n");
1420 /* make sure the eml mbox file is spooled up */
1421 if (!(mbox_file = spool_mbox(&mbox_size, NULL, &mbox_filename)))
1422 { /* error while spooling */
1423 log_write(0, LOG_MAIN|LOG_PANIC,
1424 "acl_smtp_mime: error while creating mbox spool file, message temporarily rejected.");
1425 Uunlink(spool_name);
1427 #ifdef EXPERIMENTAL_DCC
1430 smtp_respond(US"451", 3, TRUE, US"temporary local problem");
1431 message_id[0] = 0; /* Indicate no message accepted */
1432 *smtp_reply_ptr = US""; /* Indicate reply already sent */
1433 return FALSE; /* Indicate skip to end of receive function */
1439 mime_part_count = -1;
1440 rc = mime_acl_check(acl, mbox_file, NULL, &user_msg, &log_msg);
1441 (void)fclose(mbox_file);
1443 if (rfc822_file_path)
1445 mime_part_count = mime_part_count_buffer;
1447 if (unlink(CS rfc822_file_path) == -1)
1449 log_write(0, LOG_PANIC,
1450 "acl_smtp_mime: can't unlink RFC822 spool file, skipping.");
1453 rfc822_file_path = NULL;
1456 /* check if we must check any message/rfc822 attachments */
1459 uschar * scandir = string_copyn(mbox_filename,
1460 Ustrrchr(mbox_filename, '/') - mbox_filename);
1461 struct dirent * entry;
1464 for (tempdir = exim_opendir(scandir); entry = readdir(tempdir); )
1465 if (strncmpic(US entry->d_name, US"__rfc822_", 9) == 0)
1467 rfc822_file_path = string_sprintf("%s/%s", scandir, entry->d_name);
1469 debug_printf("RFC822 attachment detected: running MIME ACL for '%s'\n",
1475 if (rfc822_file_path)
1477 if ((mbox_file = Ufopen(rfc822_file_path, "rb")))
1479 /* set RFC822 expansion variable */
1481 mime_part_count_buffer = mime_part_count;
1482 goto MIME_ACL_CHECK;
1484 log_write(0, LOG_PANIC,
1485 "acl_smtp_mime: can't open RFC822 spool file, skipping.");
1486 unlink(CS rfc822_file_path);
1491 add_acl_headers(ACL_WHERE_MIME, US"MIME");
1494 recipients_count = 0;
1495 *blackholed_by_ptr = US"MIME ACL";
1496 cancel_cutthrough_connection(TRUE, US"mime acl discard");
1500 Uunlink(spool_name);
1501 cancel_cutthrough_connection(TRUE, US"mime acl not ok");
1503 #ifdef EXPERIMENTAL_DCC
1508 if (smtp_handle_acl_fail(ACL_WHERE_MIME, rc, user_msg, log_msg) != 0)
1509 *smtp_yield_ptr = FALSE; /* No more messages after dropped connection */
1510 *smtp_reply_ptr = US""; /* Indicate reply already sent */
1512 message_id[0] = 0; /* Indicate no message accepted */
1513 return FALSE; /* Cause skip to end of receive function */
1519 #endif /* WITH_CONTENT_SCAN */
1524 received_header_gen(void)
1528 header_line *received_header= header_list;
1530 timestamp = expand_string(US"${tod_full}");
1531 if (recipients_count == 1) received_for = recipients_list[0].address;
1532 received = expand_string(received_header_text);
1533 received_for = NULL;
1537 if(spool_name[0] != 0)
1538 Uunlink(spool_name); /* Lose the data file */
1539 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" "
1540 "(received_header_text) failed: %s", string_printing(received_header_text),
1541 expand_string_message);
1544 /* The first element on the header chain is reserved for the Received header,
1545 so all we have to do is fill in the text pointer, and set the type. However, if
1546 the result of the expansion is an empty string, we leave the header marked as
1547 "old" so as to refrain from adding a Received header. */
1549 if (received[0] == 0)
1551 received_header->text = string_sprintf("Received: ; %s\n", timestamp);
1552 received_header->type = htype_old;
1556 received_header->text = string_sprintf("%s; %s\n", received, timestamp);
1557 received_header->type = htype_received;
1560 received_header->slen = Ustrlen(received_header->text);
1562 DEBUG(D_receive) debug_printf(">>Generated Received: header line\n%c %s",
1563 received_header->type, received_header->text);
1568 /*************************************************
1570 *************************************************/
1572 /* Receive a message on the given input, and put it into a pair of spool files.
1573 Either a non-null list of recipients, or the extract flag will be true, or
1574 both. The flag sender_local is true for locally generated messages. The flag
1575 submission_mode is true if an ACL has obeyed "control = submission". The flag
1576 suppress_local_fixups is true if an ACL has obeyed "control =
1577 suppress_local_fixups" or -G was passed on the command-line.
1578 The flag smtp_input is true if the message is to be
1579 handled using SMTP conventions about termination and lines starting with dots.
1580 For non-SMTP messages, dot_ends is true for dot-terminated messages.
1582 If a message was successfully read, message_id[0] will be non-zero.
1584 The general actions of this function are:
1586 . Read the headers of the message (if any) into a chain of store
1589 . If there is a "sender:" header and the message is locally originated,
1590 throw it away, unless the caller is trusted, or unless
1591 active_local_sender_retain is set - which can only happen if
1592 active_local_from_check is false.
1594 . If recipients are to be extracted from the message, build the
1595 recipients list from the headers, removing any that were on the
1596 original recipients list (unless extract_addresses_remove_arguments is
1597 false), and at the same time, remove any bcc header that may be present.
1599 . Get the spool file for the data, sort out its unique name, open
1600 and lock it (but don't give it the name yet).
1602 . Generate a "Message-Id" header if the message doesn't have one, for
1603 locally-originated messages.
1605 . Generate a "Received" header.
1607 . Ensure the recipients list is fully qualified and rewritten if necessary.
1609 . If there are any rewriting rules, apply them to the sender address
1610 and also to the headers.
1612 . If there is no from: header, generate one, for locally-generated messages
1613 and messages in "submission mode" only.
1615 . If the sender is local, check that from: is correct, and if not, generate
1616 a Sender: header, unless message comes from a trusted caller, or this
1617 feature is disabled by active_local_from_check being false.
1619 . If there is no "date" header, generate one, for locally-originated
1620 or submission mode messages only.
1622 . Copy the rest of the input, or up to a terminating "." if in SMTP or
1623 dot_ends mode, to the data file. Leave it open, to hold the lock.
1625 . Write the envelope and the headers to a new file.
1627 . Set the name for the header file; close it.
1629 . Set the name for the data file; close it.
1631 Because this function can potentially be called many times in a single
1632 SMTP connection, all store should be got by store_get(), so that it will be
1633 automatically retrieved after the message is accepted.
1635 FUDGE: It seems that sites on the net send out messages with just LF
1636 terminators, despite the warnings in the RFCs, and other MTAs handle this. So
1637 we make the CRs optional in all cases.
1639 July 2003: Bare CRs in messages, especially in header lines, cause trouble. A
1640 new regime is now in place in which bare CRs in header lines are turned into LF
1641 followed by a space, so as not to terminate the header line.
1643 February 2004: A bare LF in a header line in a message whose first line was
1644 terminated by CRLF is treated in the same way as a bare CR.
1647 extract_recip TRUE if recipients are to be extracted from the message's
1650 Returns: TRUE there are more messages to be read (SMTP input)
1651 FALSE there are no more messages to be read (non-SMTP input
1652 or SMTP connection collapsed, or other failure)
1654 When reading a message for filter testing, the returned value indicates
1655 whether the headers (which is all that is read) were terminated by '.' or
1659 receive_msg(BOOL extract_recip)
1663 int process_info_len = Ustrlen(process_info);
1664 int error_rc = error_handling == ERRORS_SENDER
1665 ? errors_sender_rc : EXIT_FAILURE;
1666 int header_size = 256;
1667 int start, end, domain;
1668 int id_resolution = 0;
1670 int prevlines_length = 0;
1674 BOOL contains_resent_headers = FALSE;
1675 BOOL extracted_ignored = FALSE;
1676 BOOL first_line_ended_crlf = TRUE_UNSET;
1677 BOOL smtp_yield = TRUE;
1680 BOOL resents_exist = FALSE;
1681 uschar *resent_prefix = US"";
1682 uschar *blackholed_by = NULL;
1683 uschar *blackhole_log_msg = US"";
1684 enum {NOT_TRIED, TMP_REJ, PERM_REJ, ACCEPTED} cutthrough_done = NOT_TRIED;
1687 error_block *bad_addresses = NULL;
1689 uschar *frozen_by = NULL;
1690 uschar *queued_by = NULL;
1693 rmark rcvd_log_reset_point;
1695 struct stat statbuf;
1697 /* Final message to give to SMTP caller, and messages from ACLs */
1699 uschar *smtp_reply = NULL;
1700 uschar *user_msg, *log_msg;
1702 /* Working header pointers */
1707 /* Flags for noting the existence of certain headers (only one left) */
1709 BOOL date_header_exists = FALSE;
1711 /* Pointers to receive the addresses of headers whose contents we need. */
1713 header_line *from_header = NULL;
1714 header_line *subject_header = NULL;
1715 header_line *msgid_header = NULL;
1716 header_line *received_header;
1717 BOOL msgid_header_newly_created = FALSE;
1719 /* Variables for use when building the Received: header. */
1725 /* Release any open files that might have been cached while preparing to
1726 accept the message - e.g. by verifying addresses - because reading a message
1727 might take a fair bit of real time. */
1731 /* Extracting the recipient list from an input file is incompatible with
1732 cutthrough delivery with the no-spool option. It shouldn't be possible
1733 to set up the combination, but just in case kill any ongoing connection. */
1734 if (extract_recip || !smtp_input)
1735 cancel_cutthrough_connection(TRUE, US"not smtp input");
1737 /* Initialize the chain of headers by setting up a place-holder for Received:
1738 header. Temporarily mark it as "old", i.e. not to be used. We keep header_last
1739 pointing to the end of the chain to make adding headers simple. */
1741 received_header = header_list = header_last = store_get(sizeof(header_line), FALSE);
1742 header_list->next = NULL;
1743 header_list->type = htype_old;
1744 header_list->text = NULL;
1745 header_list->slen = 0;
1747 /* Control block for the next header to be read. */
1749 reset_point = store_mark();
1750 next = store_get(sizeof(header_line), FALSE); /* not tainted */
1751 next->text = store_get(header_size, TRUE); /* tainted */
1753 /* Initialize message id to be null (indicating no message read), and the
1754 header names list to be the normal list. Indicate there is no data file open
1755 yet, initialize the size and warning count, and deal with no size limit. */
1758 spool_data_file = NULL;
1763 received_count = 1; /* For the one we will add */
1765 if (thismessage_size_limit <= 0) thismessage_size_limit = INT_MAX;
1767 /* While reading the message, the following counts are computed. */
1769 message_linecount = body_linecount = body_zerocount =
1770 max_received_linelength = 0;
1772 #ifdef WITH_CONTENT_SCAN
1773 /* reset non-per-part mime variables */
1774 mime_is_coverletter = 0;
1776 mime_part_count = -1;
1779 #ifndef DISABLE_DKIM
1780 /* Call into DKIM to set up the context. In CHUNKING mode
1781 we clear the dot-stuffing flag */
1782 if (smtp_input && !smtp_batched_input && !f.dkim_disable_verify)
1783 dkim_exim_verify_init(chunking_state <= CHUNKING_OFFERED);
1786 #ifdef SUPPORT_DMARC
1787 if (sender_host_address) dmarc_init(); /* initialize libopendmarc */
1790 /* Remember the time of reception. Exim uses time+pid for uniqueness of message
1791 ids, and fractions of a second are required. See the comments that precede the
1792 message id creation below. */
1794 exim_gettime(&message_id_tv);
1796 /* For other uses of the received time we can operate with granularity of one
1797 second, and for that we use the global variable received_time. This is for
1798 things like ultimate message timeouts. */
1800 received_time = message_id_tv;
1802 /* If SMTP input, set the special handler for timeouts. The alarm() calls
1803 happen in the smtp_getc() function when it refills its buffer. */
1805 had_data_timeout = 0;
1807 os_non_restarting_signal(SIGALRM, data_timeout_handler);
1809 /* If not SMTP input, timeout happens only if configured, and we just set a
1810 single timeout for the whole message. */
1812 else if (receive_timeout > 0)
1814 os_non_restarting_signal(SIGALRM, data_timeout_handler);
1815 ALARM(receive_timeout);
1818 /* SIGTERM and SIGINT are caught always. */
1820 had_data_sigint = 0;
1821 signal(SIGTERM, data_sigterm_sigint_handler);
1822 signal(SIGINT, data_sigterm_sigint_handler);
1824 /* Header lines in messages are not supposed to be very long, though when
1825 unfolded, to: and cc: headers can take up a lot of store. We must also cope
1826 with the possibility of junk being thrown at us. Start by getting 256 bytes for
1827 storing the header, and extend this as necessary using string_cat().
1829 To cope with total lunacies, impose an upper limit on the length of the header
1830 section of the message, as otherwise the store will fill up. We must also cope
1831 with the possibility of binary zeros in the data. Hence we cannot use fgets().
1832 Folded header lines are joined into one string, leaving the '\n' characters
1833 inside them, so that writing them out reproduces the input.
1835 Loop for each character of each header; the next structure for chaining the
1836 header is set up already, with ptr the offset of the next character in
1841 int ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
1843 /* If we hit EOF on a SMTP connection, it's an error, since incoming
1844 SMTP must have a correct "." terminator. */
1846 if (ch == EOF && smtp_input /* && !smtp_batched_input */)
1848 smtp_reply = handle_lost_connection(US" (header)");
1850 goto TIDYUP; /* Skip to end of function */
1853 /* See if we are at the current header's size limit - there must be at least
1854 four bytes left. This allows for the new character plus a zero, plus two for
1855 extra insertions when we are playing games with dots and carriage returns. If
1856 we are at the limit, extend the text buffer. This could have been done
1857 automatically using string_cat() but because this is a tightish loop storing
1858 only one character at a time, we choose to do it inline. Normally
1859 store_extend() will be able to extend the block; only at the end of a big
1860 store block will a copy be needed. To handle the case of very long headers
1861 (and sometimes lunatic messages can have ones that are 100s of K long) we
1862 call store_release() for strings that have been copied - if the string is at
1863 the start of a block (and therefore the only thing in it, because we aren't
1864 doing any other gets), the block gets freed. We can only do this release if
1865 there were no allocations since the once that we want to free. */
1867 if (ptr >= header_size - 4)
1869 int oldsize = header_size;
1871 if (header_size >= INT_MAX/2)
1875 /* The data came from the message, so is tainted. */
1877 if (!store_extend(next->text, TRUE, oldsize, header_size))
1878 next->text = store_newblock(next->text, TRUE, header_size, ptr);
1881 /* Cope with receiving a binary zero. There is dispute about whether
1882 these should be allowed in RFC 822 messages. The middle view is that they
1883 should not be allowed in headers, at least. Exim takes this attitude at
1884 the moment. We can't just stomp on them here, because we don't know that
1885 this line is a header yet. Set a flag to cause scanning later. */
1887 if (ch == 0) had_zero++;
1889 /* Test for termination. Lines in remote SMTP are terminated by CRLF, while
1890 those from data files use just LF. Treat LF in local SMTP input as a
1891 terminator too. Treat EOF as a line terminator always. */
1893 if (ch == EOF) goto EOL;
1895 /* FUDGE: There are sites out there that don't send CRs before their LFs, and
1896 other MTAs accept this. We are therefore forced into this "liberalisation"
1897 too, so we accept LF as a line terminator whatever the source of the message.
1898 However, if the first line of the message ended with a CRLF, we treat a bare
1899 LF specially by inserting a white space after it to ensure that the header
1900 line is not terminated. */
1904 if (first_line_ended_crlf == TRUE_UNSET) first_line_ended_crlf = FALSE;
1905 else if (first_line_ended_crlf) receive_ungetc(' ');
1909 /* This is not the end of the line. If this is SMTP input and this is
1910 the first character in the line and it is a "." character, ignore it.
1911 This implements the dot-doubling rule, though header lines starting with
1912 dots aren't exactly common. They are legal in RFC 822, though. If the
1913 following is CRLF or LF, this is the line that that terminates the
1914 entire message. We set message_ended to indicate this has happened (to
1915 prevent further reading), and break out of the loop, having freed the
1916 empty header, and set next = NULL to indicate no data line. */
1918 if (ptr == 0 && ch == '.' && f.dot_ends)
1920 ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
1923 ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
1927 ch = '\r'; /* Revert to CR */
1932 message_ended = END_DOT;
1933 reset_point = store_reset(reset_point);
1935 break; /* End character-reading loop */
1938 /* For non-SMTP input, the dot at the start of the line was really a data
1939 character. What is now in ch is the following character. We guaranteed
1940 enough space for this above. */
1944 next->text[ptr++] = '.';
1949 /* If CR is immediately followed by LF, end the line, ignoring the CR, and
1950 remember this case if this is the first line ending. */
1954 ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
1957 if (first_line_ended_crlf == TRUE_UNSET) first_line_ended_crlf = TRUE;
1961 /* Otherwise, put back the character after CR, and turn the bare CR
1964 ch = (receive_ungetc)(ch);
1965 next->text[ptr++] = '\n';
1970 /* We have a data character for the header line. */
1972 next->text[ptr++] = ch; /* Add to buffer */
1973 message_size++; /* Total message size so far */
1975 /* Handle failure due to a humungously long header section. The >= allows
1976 for the terminating \n. Add what we have so far onto the headers list so
1977 that it gets reflected in any error message, and back up the just-read
1980 if (message_size >= header_maxsize)
1983 next->text[ptr] = 0;
1985 next->type = htype_other;
1987 header_last->next = next;
1990 log_write(0, LOG_MAIN, "ridiculously long message header received from "
1991 "%s (more than %d characters): message abandoned",
1992 f.sender_host_unknown ? sender_ident : sender_fullhost, header_maxsize);
1996 smtp_reply = US"552 Message header is ridiculously long";
1997 receive_swallow_smtp();
1998 goto TIDYUP; /* Skip to end of function */
2003 give_local_error(ERRMESS_VLONGHEADER,
2004 string_sprintf("message header longer than %d characters received: "
2005 "message not accepted", header_maxsize), US"", error_rc, stdin,
2007 /* Does not return */
2011 continue; /* With next input character */
2013 /* End of header line reached */
2017 /* Keep track of lines for BSMTP errors and overall message_linecount. */
2019 receive_linecount++;
2020 message_linecount++;
2022 /* Keep track of maximum line length */
2024 if (ptr - prevlines_length > max_received_linelength)
2025 max_received_linelength = ptr - prevlines_length;
2026 prevlines_length = ptr + 1;
2028 /* Now put in the terminating newline. There is always space for
2029 at least two more characters. */
2031 next->text[ptr++] = '\n';
2034 /* A blank line signals the end of the headers; release the unwanted
2035 space and set next to NULL to indicate this. */
2039 reset_point = store_reset(reset_point);
2044 /* There is data in the line; see if the next input character is a
2045 whitespace character. If it is, we have a continuation of this header line.
2046 There is always space for at least one character at this point. */
2050 int nextch = (receive_getc)(GETC_BUFFER_UNLIMITED);
2051 if (nextch == ' ' || nextch == '\t')
2053 next->text[ptr++] = nextch;
2054 if (++message_size >= header_maxsize)
2056 continue; /* Iterate the loop */
2058 else if (nextch != EOF) (receive_ungetc)(nextch); /* For next time */
2059 else ch = EOF; /* Cause main loop to exit at end */
2062 /* We have got to the real line end. Terminate the string and release store
2063 beyond it. If it turns out to be a real header, internal binary zeros will
2064 be squashed later. */
2066 next->text[ptr] = 0;
2068 store_release_above(next->text + ptr + 1);
2070 /* Check the running total size against the overall message size limit. We
2071 don't expect to fail here, but if the overall limit is set less than MESSAGE_
2072 MAXSIZE and a big header is sent, we want to catch it. Just stop reading
2073 headers - the code to read the body will then also hit the buffer. */
2075 if (message_size > thismessage_size_limit) break;
2077 /* A line that is not syntactically correct for a header also marks
2078 the end of the headers. In this case, we leave next containing the
2079 first data line. This might actually be several lines because of the
2080 continuation logic applied above, but that doesn't matter.
2082 It turns out that smail, and presumably sendmail, accept leading lines
2085 From ph10 Fri Jan 5 12:35 GMT 1996
2087 in messages. The "mail" command on Solaris 2 sends such lines. I cannot
2088 find any documentation of this, but for compatibility it had better be
2089 accepted. Exim restricts it to the case of non-smtp messages, and
2090 treats it as an alternative to the -f command line option. Thus it is
2091 ignored except for trusted users or filter testing. Otherwise it is taken
2092 as the sender address, unless -f was used (sendmail compatibility).
2094 It further turns out that some UUCPs generate the From_line in a different
2097 From ph10 Fri, 7 Jan 97 14:00:00 GMT
2099 The regex for matching these things is now capable of recognizing both
2100 formats (including 2- and 4-digit years in the latter). In fact, the regex
2101 is now configurable, as is the expansion string to fish out the sender.
2103 Even further on it has been discovered that some broken clients send
2104 these lines in SMTP messages. There is now an option to ignore them from
2105 specified hosts or networks. Sigh. */
2107 if ( header_last == header_list
2109 || ( sender_host_address
2110 && verify_check_host(&ignore_fromline_hosts) == OK
2112 || (!sender_host_address && ignore_fromline_local)
2114 && regex_match_and_setup(regex_From, next->text, 0, -1)
2117 if (!f.sender_address_forced)
2119 uschar *uucp_sender = expand_string(uucp_from_sender);
2121 log_write(0, LOG_MAIN|LOG_PANIC,
2122 "expansion of \"%s\" failed after matching "
2123 "\"From \" line: %s", uucp_from_sender, expand_string_message);
2126 int start, end, domain;
2128 uschar *newsender = parse_extract_address(uucp_sender, &errmess,
2129 &start, &end, &domain, TRUE);
2132 if (domain == 0 && newsender[0] != 0)
2133 /* deconst ok as newsender was not const */
2134 newsender = US rewrite_address_qualify(newsender, FALSE);
2136 if (filter_test != FTEST_NONE || receive_check_set_sender(newsender))
2138 sender_address = newsender;
2140 if (f.trusted_caller || filter_test != FTEST_NONE)
2142 authenticated_sender = NULL;
2143 originator_name = US"";
2144 f.sender_local = FALSE;
2147 if (filter_test != FTEST_NONE)
2148 printf("Sender taken from \"From \" line\n");
2155 /* Not a leading "From " line. Check to see if it is a valid header line.
2156 Header names may contain any non-control characters except space and colon,
2161 uschar *p = next->text;
2163 /* If not a valid header line, break from the header reading loop, leaving
2164 next != NULL, indicating that it holds the first line of the body. */
2166 if (isspace(*p)) break;
2167 while (mac_isgraph(*p) && *p != ':') p++;
2168 while (isspace(*p)) p++;
2171 body_zerocount = had_zero;
2175 /* We have a valid header line. If there were any binary zeroes in
2176 the line, stomp on them here. */
2179 for (uschar * p = next->text; p < next->text + ptr; p++) if (*p == 0)
2182 /* It is perfectly legal to have an empty continuation line
2183 at the end of a header, but it is confusing to humans
2184 looking at such messages, since it looks like a blank line.
2185 Reduce confusion by removing redundant white space at the
2186 end. We know that there is at least one printing character
2187 (the ':' tested for above) so there is no danger of running
2190 p = next->text + ptr - 2;
2193 while (*p == ' ' || *p == '\t') p--;
2194 if (*p != '\n') break;
2195 ptr = (p--) - next->text + 1;
2196 message_size -= next->slen - ptr;
2197 next->text[ptr] = 0;
2201 /* Add the header to the chain */
2203 next->type = htype_other;
2205 header_last->next = next;
2208 /* Check the limit for individual line lengths. This comes after adding to
2209 the chain so that the failing line is reflected if a bounce is generated
2210 (for a local message). */
2212 if (header_line_maxsize > 0 && next->slen > header_line_maxsize)
2214 log_write(0, LOG_MAIN, "overlong message header line received from "
2215 "%s (more than %d characters): message abandoned",
2216 f.sender_host_unknown ? sender_ident : sender_fullhost,
2217 header_line_maxsize);
2221 smtp_reply = US"552 A message header line is too long";
2222 receive_swallow_smtp();
2223 goto TIDYUP; /* Skip to end of function */
2227 give_local_error(ERRMESS_VLONGHDRLINE,
2228 string_sprintf("message header line longer than %d characters "
2229 "received: message not accepted", header_line_maxsize), US"",
2230 error_rc, stdin, header_list->next);
2231 /* Does not return */
2234 /* Note if any resent- fields exist. */
2236 if (!resents_exist && strncmpic(next->text, US"resent-", 7) == 0)
2238 resents_exist = TRUE;
2239 resent_prefix = US"Resent-";
2243 /* Reject CHUNKING messages that do not CRLF their first header line */
2245 if (!first_line_ended_crlf && chunking_state > CHUNKING_OFFERED)
2247 log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
2248 "Non-CRLF-terminated header, under CHUNKING: message abandoned",
2250 sender_fullhost ? " H=" : "", sender_fullhost ? sender_fullhost : US"",
2251 sender_ident ? " U=" : "", sender_ident ? sender_ident : US"");
2252 smtp_printf("552 Message header not CRLF terminated\r\n", FALSE);
2255 goto TIDYUP; /* Skip to end of function */
2258 /* The line has been handled. If we have hit EOF, break out of the loop,
2259 indicating no pending data line. */
2261 if (ch == EOF) { next = NULL; break; }
2263 /* Set up for the next header */
2265 reset_point = store_mark();
2267 next = store_get(sizeof(header_line), FALSE);
2268 next->text = store_get(header_size, TRUE);
2271 prevlines_length = 0;
2272 } /* Continue, starting to read the next header */
2274 /* At this point, we have read all the headers into a data structure in main
2275 store. The first header is still the dummy placeholder for the Received: header
2276 we are going to generate a bit later on. If next != NULL, it contains the first
2277 data line - which terminated the headers before reaching a blank line (not the
2282 debug_printf(">>Headers received:\n");
2283 for (header_line * h = header_list->next; h; h = h->next)
2284 debug_printf("%s", h->text);
2288 /* End of file on any SMTP connection is an error. If an incoming SMTP call
2289 is dropped immediately after valid headers, the next thing we will see is EOF.
2290 We must test for this specially, as further down the reading of the data is
2291 skipped if already at EOF. */
2293 if (smtp_input && (receive_feof)())
2295 smtp_reply = handle_lost_connection(US" (after header)");
2297 goto TIDYUP; /* Skip to end of function */
2300 /* If this is a filter test run and no headers were read, output a warning
2301 in case there is a mistake in the test message. */
2303 if (filter_test != FTEST_NONE && header_list->next == NULL)
2304 printf("Warning: no message headers read\n");
2307 /* Scan the headers to identify them. Some are merely marked for later
2308 processing; some are dealt with here. */
2310 for (header_line * h = header_list->next; h; h = h->next)
2312 BOOL is_resent = strncmpic(h->text, US"resent-", 7) == 0;
2313 if (is_resent) contains_resent_headers = TRUE;
2315 switch (header_checkname(h, is_resent))
2318 h->type = htype_bcc; /* Both Bcc: and Resent-Bcc: */
2322 h->type = htype_cc; /* Both Cc: and Resent-Cc: */
2325 /* Record whether a Date: or Resent-Date: header exists, as appropriate. */
2328 if (!resents_exist || is_resent) date_header_exists = TRUE;
2331 /* Same comments as about Return-Path: below. */
2333 case htype_delivery_date:
2334 if (delivery_date_remove) h->type = htype_old;
2337 /* Same comments as about Return-Path: below. */
2339 case htype_envelope_to:
2340 if (envelope_to_remove) h->type = htype_old;
2343 /* Mark all "From:" headers so they get rewritten. Save the one that is to
2344 be used for Sender: checking. For Sendmail compatibility, if the "From:"
2345 header consists of just the login id of the user who called Exim, rewrite
2346 it with the gecos field first. Apply this rule to Resent-From: if there
2347 are resent- fields. */
2350 h->type = htype_from;
2351 if (!resents_exist || is_resent)
2357 uschar *s = Ustrchr(h->text, ':') + 1;
2358 while (isspace(*s)) s++;
2359 len = h->slen - (s - h->text) - 1;
2360 if (Ustrlen(originator_login) == len &&
2361 strncmpic(s, originator_login, len) == 0)
2363 uschar *name = is_resent? US"Resent-From" : US"From";
2364 header_add(htype_from, "%s: %s <%s@%s>\n", name, originator_name,
2365 originator_login, qualify_domain_sender);
2366 from_header = header_last;
2367 h->type = htype_old;
2368 DEBUG(D_receive|D_rewrite)
2369 debug_printf("rewrote \"%s:\" header using gecos\n", name);
2375 /* Identify the Message-id: header for generating "in-reply-to" in the
2376 autoreply transport. For incoming logging, save any resent- value. In both
2377 cases, take just the first of any multiples. */
2380 if (!msgid_header && (!resents_exist || is_resent))
2387 /* Flag all Received: headers */
2389 case htype_received:
2390 h->type = htype_received;
2394 /* "Reply-to:" is just noted (there is no resent-reply-to field) */
2396 case htype_reply_to:
2397 h->type = htype_reply_to;
2400 /* The Return-path: header is supposed to be added to messages when
2401 they leave the SMTP system. We shouldn't receive messages that already
2402 contain Return-path. However, since Exim generates Return-path: on
2403 local delivery, resent messages may well contain it. We therefore
2404 provide an option (which defaults on) to remove any Return-path: headers
2405 on input. Removal actually means flagging as "old", which prevents the
2406 header being transmitted with the message. */
2408 case htype_return_path:
2409 if (return_path_remove) h->type = htype_old;
2411 /* If we are testing a mail filter file, use the value of the
2412 Return-Path: header to set up the return_path variable, which is not
2413 otherwise set. However, remove any <> that surround the address
2414 because the variable doesn't have these. */
2416 if (filter_test != FTEST_NONE)
2418 uschar *start = h->text + 12;
2419 uschar *end = start + Ustrlen(start);
2420 while (isspace(*start)) start++;
2421 while (end > start && isspace(end[-1])) end--;
2422 if (*start == '<' && end[-1] == '>')
2427 return_path = string_copyn(start, end - start);
2428 printf("Return-path taken from \"Return-path:\" header line\n");
2432 /* If there is a "Sender:" header and the message is locally originated,
2433 and from an untrusted caller and suppress_local_fixups is not set, or if we
2434 are in submission mode for a remote message, mark it "old" so that it will
2435 not be transmitted with the message, unless active_local_sender_retain is
2436 set. (This can only be true if active_local_from_check is false.) If there
2437 are any resent- headers in the message, apply this rule to Resent-Sender:
2438 instead of Sender:. Messages with multiple resent- header sets cannot be
2439 tidily handled. (For this reason, at least one MUA - Pine - turns old
2440 resent- headers into X-resent- headers when resending, leaving just one
2444 h->type = !f.active_local_sender_retain
2445 && ( f.sender_local && !f.trusted_caller && !f.suppress_local_fixups
2446 || f.submission_mode
2448 && (!resents_exist || is_resent)
2449 ? htype_old : htype_sender;
2452 /* Remember the Subject: header for logging. There is no Resent-Subject */
2458 /* "To:" gets flagged, and the existence of a recipient header is noted,
2459 whether it's resent- or not. */
2464 to_or_cc_header_exists = TRUE;
2470 /* Extract recipients from the headers if that is required (the -t option).
2471 Note that this is documented as being done *before* any address rewriting takes
2472 place. There are two possibilities:
2474 (1) According to sendmail documentation for Solaris, IRIX, and HP-UX, any
2475 recipients already listed are to be REMOVED from the message. Smail 3 works
2476 like this. We need to build a non-recipients tree for that list, because in
2477 subsequent processing this data is held in a tree and that's what the
2478 spool_write_header() function expects. Make sure that non-recipient addresses
2479 are fully qualified and rewritten if necessary.
2481 (2) According to other sendmail documentation, -t ADDS extracted recipients to
2482 those in the command line arguments (and it is rumoured some other MTAs do
2483 this). Therefore, there is an option to make Exim behave this way.
2485 *** Notes on "Resent-" header lines ***
2487 The presence of resent-headers in the message makes -t horribly ambiguous.
2488 Experiments with sendmail showed that it uses recipients for all resent-
2489 headers, totally ignoring the concept of "sets of resent- headers" as described
2490 in RFC 2822 section 3.6.6. Sendmail also amalgamates them into a single set
2491 with all the addresses in one instance of each header.
2493 This seems to me not to be at all sensible. Before release 4.20, Exim 4 gave an
2494 error for -t if there were resent- headers in the message. However, after a
2495 discussion on the mailing list, I've learned that there are MUAs that use
2496 resent- headers with -t, and also that the stuff about sets of resent- headers
2497 and their ordering in RFC 2822 is generally ignored. An MUA that submits a
2498 message with -t and resent- header lines makes sure that only *its* resent-
2499 headers are present; previous ones are often renamed as X-resent- for example.
2501 Consequently, Exim has been changed so that, if any resent- header lines are
2502 present, the recipients are taken from all of the appropriate resent- lines,
2503 and not from the ordinary To:, Cc:, etc. */
2508 error_block **bnext = &bad_addresses;
2510 if (extract_addresses_remove_arguments)
2512 while (recipients_count-- > 0)
2514 const uschar * s = rewrite_address(recipients_list[recipients_count].address,
2515 TRUE, TRUE, global_rewrite_rules, rewrite_existflags);
2516 tree_add_nonrecipient(s);
2518 recipients_list = NULL;
2519 recipients_count = recipients_list_max = 0;
2522 /* Now scan the headers */
2524 for (header_line * h = header_list->next; h; h = h->next)
2526 if ((h->type == htype_to || h->type == htype_cc || h->type == htype_bcc) &&
2527 (!contains_resent_headers || strncmpic(h->text, US"resent-", 7) == 0))
2529 uschar *s = Ustrchr(h->text, ':') + 1;
2530 while (isspace(*s)) s++;
2532 f.parse_allow_group = TRUE; /* Allow address group syntax */
2536 uschar *ss = parse_find_address_end(s, FALSE);
2537 uschar *recipient, *errmess, *pp;
2538 int start, end, domain;
2540 /* Check on maximum */
2542 if (recipients_max > 0 && ++rcount > recipients_max)
2543 give_local_error(ERRMESS_TOOMANYRECIP, US"too many recipients",
2544 US"message rejected: ", error_rc, stdin, NULL);
2545 /* Does not return */
2547 /* Make a copy of the address, and remove any internal newlines. These
2548 may be present as a result of continuations of the header line. The
2549 white space that follows the newline must not be removed - it is part
2552 pp = recipient = store_get(ss - s + 1, is_tainted(s));
2553 for (uschar * p = s; p < ss; p++) if (*p != '\n') *pp++ = *p;
2558 BOOL b = allow_utf8_domains;
2559 allow_utf8_domains = TRUE;
2561 recipient = parse_extract_address(recipient, &errmess, &start, &end,
2565 if (string_is_utf8(recipient))
2566 message_smtputf8 = TRUE;
2568 allow_utf8_domains = b;
2572 /* Keep a list of all the bad addresses so we can send a single
2573 error message at the end. However, an empty address is not an error;
2574 just ignore it. This can come from an empty group list like
2576 To: Recipients of list:;
2578 If there are no recipients at all, an error will occur later. */
2580 if (!recipient && Ustrcmp(errmess, "empty address") != 0)
2582 int len = Ustrlen(s);
2583 error_block *b = store_get(sizeof(error_block), FALSE);
2584 while (len > 0 && isspace(s[len-1])) len--;
2586 b->text1 = string_printing(string_copyn(s, len));
2592 /* If the recipient is already in the nonrecipients tree, it must
2593 have appeared on the command line with the option extract_addresses_
2594 remove_arguments set. Do not add it to the recipients, and keep a note
2595 that this has happened, in order to give a better error if there are
2596 no recipients left. */
2598 else if (recipient != NULL)
2600 if (tree_search(tree_nonrecipients, recipient) == NULL)
2601 receive_add_recipient(recipient, -1);
2603 extracted_ignored = TRUE;
2606 /* Move on past this address */
2608 s = ss + (*ss? 1:0);
2609 while (isspace(*s)) s++;
2610 } /* Next address */
2612 f.parse_allow_group = FALSE; /* Reset group syntax flags */
2613 f.parse_found_group = FALSE;
2615 /* If this was the bcc: header, mark it "old", which means it
2616 will be kept on the spool, but not transmitted as part of the
2619 if (h->type == htype_bcc) h->type = htype_old;
2620 } /* For appropriate header line */
2621 } /* For each header line */
2625 /* Now build the unique message id. This has changed several times over the
2626 lifetime of Exim. This description was rewritten for Exim 4.14 (February 2003).
2627 Retaining all the history in the comment has become too unwieldy - read
2628 previous release sources if you want it.
2630 The message ID has 3 parts: tttttt-pppppp-ss. Each part is a number in base 62.
2631 The first part is the current time, in seconds. The second part is the current
2632 pid. Both are large enough to hold 32-bit numbers in base 62. The third part
2633 can hold a number in the range 0-3843. It used to be a computed sequence
2634 number, but is now the fractional component of the current time in units of
2635 1/2000 of a second (i.e. a value in the range 0-1999). After a message has been
2636 received, Exim ensures that the timer has ticked at the appropriate level
2637 before proceeding, to avoid duplication if the pid happened to be re-used
2638 within the same time period. It seems likely that most messages will take at
2639 least half a millisecond to be received, so no delay will normally be
2640 necessary. At least for some time...
2642 There is a modification when localhost_number is set. Formerly this was allowed
2643 to be as large as 255. Now it is restricted to the range 0-16, and the final
2644 component of the message id becomes (localhost_number * 200) + fractional time
2645 in units of 1/200 of a second (i.e. a value in the range 0-3399).
2647 Some not-really-Unix operating systems use case-insensitive file names (Darwin,
2648 Cygwin). For these, we have to use base 36 instead of base 62. Luckily, this
2649 still allows the tttttt field to hold a large enough number to last for some
2650 more decades, and the final two-digit field can hold numbers up to 1295, which
2651 is enough for milliseconds (instead of 1/2000 of a second).
2653 However, the pppppp field cannot hold a 32-bit pid, but it can hold a 31-bit
2654 pid, so it is probably safe because pids have to be positive. The
2655 localhost_number is restricted to 0-10 for these hosts, and when it is set, the
2656 final field becomes (localhost_number * 100) + fractional time in centiseconds.
2658 Note that string_base62() returns its data in a static storage block, so it
2659 must be copied before calling string_base62() again. It always returns exactly
2662 There doesn't seem to be anything in the RFC which requires a message id to
2663 start with a letter, but Smail was changed to ensure this. The external form of
2664 the message id (as supplied by string expansion) therefore starts with an
2665 additional leading 'E'. The spool file names do not include this leading
2666 letter and it is not used internally.
2668 NOTE: If ever the format of message ids is changed, the regular expression for
2669 checking that a string is in this format must be updated in a corresponding
2670 way. It appears in the initializing code in exim.c. The macro MESSAGE_ID_LENGTH
2671 must also be changed to reflect the correct string length. The queue-sort code
2672 needs to know the layout. Then, of course, other programs that rely on the
2673 message id format will need updating too. */
2675 Ustrncpy(message_id, string_base62((long int)(message_id_tv.tv_sec)), 6);
2676 message_id[6] = '-';
2677 Ustrncpy(message_id + 7, string_base62((long int)getpid()), 6);
2679 /* Deal with the case where the host number is set. The value of the number was
2680 checked when it was read, to ensure it isn't too big. The timing granularity is
2681 left in id_resolution so that an appropriate wait can be done after receiving
2682 the message, if necessary (we hope it won't be). */
2684 if (host_number_string)
2686 id_resolution = BASE_62 == 62 ? 5000 : 10000;
2687 sprintf(CS(message_id + MESSAGE_ID_LENGTH - 3), "-%2s",
2688 string_base62((long int)(
2689 host_number * (1000000/id_resolution) +
2690 message_id_tv.tv_usec/id_resolution)) + 4);
2693 /* Host number not set: final field is just the fractional time at an
2694 appropriate resolution. */
2698 id_resolution = BASE_62 == 62 ? 500 : 1000;
2699 sprintf(CS(message_id + MESSAGE_ID_LENGTH - 3), "-%2s",
2700 string_base62((long int)(message_id_tv.tv_usec/id_resolution)) + 4);
2703 /* Add the current message id onto the current process info string if
2706 (void)string_format(process_info + process_info_len,
2707 PROCESS_INFO_SIZE - process_info_len, " id=%s", message_id);
2709 /* If we are using multiple input directories, set up the one for this message
2710 to be the least significant base-62 digit of the time of arrival. Otherwise
2711 ensure that it is an empty string. */
2713 set_subdir_str(message_subdir, message_id, 0);
2715 /* Now that we have the message-id, if there is no message-id: header, generate
2716 one, but only for local (without suppress_local_fixups) or submission mode
2717 messages. This can be user-configured if required, but we had better flatten
2718 any illegal characters therein. */
2721 && ((!sender_host_address && !f.suppress_local_fixups) || f.submission_mode))
2723 uschar *id_text = US"";
2724 uschar *id_domain = primary_hostname;
2727 /* Permit only letters, digits, dots, and hyphens in the domain */
2729 if (message_id_domain)
2731 uschar *new_id_domain = expand_string(message_id_domain);
2734 if (!f.expand_string_forcedfail)
2735 log_write(0, LOG_MAIN|LOG_PANIC,
2736 "expansion of \"%s\" (message_id_header_domain) "
2737 "failed: %s", message_id_domain, expand_string_message);
2739 else if (*new_id_domain)
2741 id_domain = new_id_domain;
2742 for (uschar * p = id_domain; *p; p++)
2743 if (!isalnum(*p) && *p != '.') *p = '-'; /* No need to test '-' ! */
2747 /* Permit all characters except controls and RFC 2822 specials in the
2748 additional text part. */
2750 if (message_id_text)
2752 uschar *new_id_text = expand_string(message_id_text);
2755 if (!f.expand_string_forcedfail)
2756 log_write(0, LOG_MAIN|LOG_PANIC,
2757 "expansion of \"%s\" (message_id_header_text) "
2758 "failed: %s", message_id_text, expand_string_message);
2760 else if (*new_id_text)
2762 id_text = new_id_text;
2763 for (uschar * p = id_text; *p; p++) if (mac_iscntrl_or_special(*p)) *p = '-';
2767 /* Add the header line.
2768 Resent-* headers are prepended, per RFC 5322 3.6.6. Non-Resent-* are
2769 appended, to preserve classical expectations of header ordering. */
2771 h = header_add_at_position_internal(!resents_exist, NULL, FALSE, htype_id,
2772 "%sMessage-Id: <%s%s%s@%s>\n", resent_prefix, message_id_external,
2773 *id_text == 0 ? "" : ".", id_text, id_domain);
2775 /* Arrange for newly-created Message-Id to be logged */
2779 msgid_header_newly_created = TRUE;
2784 /* If we are to log recipients, keep a copy of the raw ones before any possible
2785 rewriting. Must copy the count, because later ACLs and the local_scan()
2786 function may mess with the real recipients. */
2788 if (LOGGING(received_recipients))
2790 raw_recipients = store_get(recipients_count * sizeof(uschar *), FALSE);
2791 for (int i = 0; i < recipients_count; i++)
2792 raw_recipients[i] = string_copy(recipients_list[i].address);
2793 raw_recipients_count = recipients_count;
2796 /* Ensure the recipients list is fully qualified and rewritten. Unqualified
2797 recipients will get here only if the conditions were right (allow_unqualified_
2798 recipient is TRUE). */
2800 for (int i = 0; i < recipients_count; i++)
2801 recipients_list[i].address = /* deconst ok as src was not cont */
2802 US rewrite_address(recipients_list[i].address, TRUE, TRUE,
2803 global_rewrite_rules, rewrite_existflags);
2805 /* If there is no From: header, generate one for local (without
2806 suppress_local_fixups) or submission_mode messages. If there is no sender
2807 address, but the sender is local or this is a local delivery error, use the
2808 originator login. This shouldn't happen for genuine bounces, but might happen
2809 for autoreplies. The addition of From: must be done *before* checking for the
2810 possible addition of a Sender: header, because untrusted_set_sender allows an
2811 untrusted user to set anything in the envelope (which might then get info
2812 From:) but we still want to ensure a valid Sender: if it is required. */
2815 && ((!sender_host_address && !f.suppress_local_fixups) || f.submission_mode))
2817 uschar *oname = US"";
2819 /* Use the originator_name if this is a locally submitted message and the
2820 caller is not trusted. For trusted callers, use it only if -F was used to
2821 force its value or if we have a non-SMTP message for which -f was not used
2822 to set the sender. */
2824 if (!sender_host_address)
2826 if (!f.trusted_caller || f.sender_name_forced ||
2827 (!smtp_input && !f.sender_address_forced))
2828 oname = originator_name;
2831 /* For non-locally submitted messages, the only time we use the originator
2832 name is when it was forced by the /name= option on control=submission. */
2834 else if (submission_name) oname = submission_name;
2836 /* Envelope sender is empty */
2838 if (!*sender_address)
2840 uschar *fromstart, *fromend;
2842 fromstart = string_sprintf("%sFrom: %s%s",
2843 resent_prefix, oname, *oname ? " <" : "");
2844 fromend = *oname ? US">" : US"";
2846 if (f.sender_local || f.local_error_message)
2847 header_add(htype_from, "%s%s@%s%s\n", fromstart,
2848 local_part_quote(originator_login), qualify_domain_sender,
2851 else if (f.submission_mode && authenticated_id)
2853 if (!submission_domain)
2854 header_add(htype_from, "%s%s@%s%s\n", fromstart,
2855 local_part_quote(authenticated_id), qualify_domain_sender,
2858 else if (!*submission_domain) /* empty => whole address set */
2859 header_add(htype_from, "%s%s%s\n", fromstart, authenticated_id,
2863 header_add(htype_from, "%s%s@%s%s\n", fromstart,
2864 local_part_quote(authenticated_id), submission_domain, fromend);
2866 from_header = header_last; /* To get it checked for Sender: */
2870 /* There is a non-null envelope sender. Build the header using the original
2871 sender address, before any rewriting that might have been done while
2876 header_add(htype_from, "%sFrom: %s%s%s%s\n", resent_prefix,
2879 sender_address_unrewritten ? sender_address_unrewritten : sender_address,
2882 from_header = header_last; /* To get it checked for Sender: */
2887 /* If the sender is local (without suppress_local_fixups), or if we are in
2888 submission mode and there is an authenticated_id, check that an existing From:
2889 is correct, and if not, generate a Sender: header, unless disabled. Any
2890 previously-existing Sender: header was removed above. Note that sender_local,
2891 as well as being TRUE if the caller of exim is not trusted, is also true if a
2892 trusted caller did not supply a -f argument for non-smtp input. To allow
2893 trusted callers to forge From: without supplying -f, we have to test explicitly
2894 here. If the From: header contains more than one address, then the call to
2895 parse_extract_address fails, and a Sender: header is inserted, as required. */
2898 && ( f.active_local_from_check
2899 && ( f.sender_local && !f.trusted_caller && !f.suppress_local_fixups
2900 || f.submission_mode && authenticated_id
2903 BOOL make_sender = TRUE;
2904 int start, end, domain;
2906 uschar *from_address =
2907 parse_extract_address(Ustrchr(from_header->text, ':') + 1, &errmess,
2908 &start, &end, &domain, FALSE);
2909 uschar *generated_sender_address;
2911 generated_sender_address = f.submission_mode
2912 ? !submission_domain
2913 ? string_sprintf("%s@%s",
2914 local_part_quote(authenticated_id), qualify_domain_sender)
2915 : !*submission_domain /* empty => full address */
2916 ? string_sprintf("%s", authenticated_id)
2917 : string_sprintf("%s@%s",
2918 local_part_quote(authenticated_id), submission_domain)
2919 : string_sprintf("%s@%s",
2920 local_part_quote(originator_login), qualify_domain_sender);
2922 /* Remove permitted prefixes and suffixes from the local part of the From:
2923 address before doing the comparison with the generated sender. */
2928 uschar *at = domain ? from_address + domain - 1 : NULL;
2931 from_address += route_check_prefix(from_address, local_from_prefix, NULL);
2932 if ((slen = route_check_suffix(from_address, local_from_suffix, NULL)) > 0)
2934 memmove(from_address+slen, from_address, Ustrlen(from_address)-slen);
2935 from_address += slen;
2939 if ( strcmpic(generated_sender_address, from_address) == 0
2940 || (!domain && strcmpic(from_address, originator_login) == 0))
2941 make_sender = FALSE;
2944 /* We have to cause the Sender header to be rewritten if there are
2945 appropriate rewriting rules. */
2948 if (f.submission_mode && !submission_name)
2949 header_add(htype_sender, "%sSender: %s\n", resent_prefix,
2950 generated_sender_address);
2952 header_add(htype_sender, "%sSender: %s <%s>\n",
2954 f.submission_mode ? submission_name : originator_name,
2955 generated_sender_address);
2957 /* Ensure that a non-null envelope sender address corresponds to the
2958 submission mode sender address. */
2960 if (f.submission_mode && *sender_address)
2962 if (!sender_address_unrewritten)
2963 sender_address_unrewritten = sender_address;
2964 sender_address = generated_sender_address;
2965 if (Ustrcmp(sender_address_unrewritten, generated_sender_address) != 0)
2966 log_write(L_address_rewrite, LOG_MAIN,
2967 "\"%s\" from env-from rewritten as \"%s\" by submission mode",
2968 sender_address_unrewritten, generated_sender_address);
2972 /* If there are any rewriting rules, apply them to the sender address, unless
2973 it has already been rewritten as part of verification for SMTP input. */
2975 if (global_rewrite_rules && !sender_address_unrewritten && *sender_address)
2977 /* deconst ok as src was not const */
2978 sender_address = US rewrite_address(sender_address, FALSE, TRUE,
2979 global_rewrite_rules, rewrite_existflags);
2980 DEBUG(D_receive|D_rewrite)
2981 debug_printf("rewritten sender = %s\n", sender_address);
2985 /* The headers must be run through rewrite_header(), because it ensures that
2986 addresses are fully qualified, as well as applying any rewriting rules that may
2989 Qualification of header addresses in a message from a remote host happens only
2990 if the host is in sender_unqualified_hosts or recipient_unqualified hosts, as
2991 appropriate. For local messages, qualification always happens, unless -bnq is
2992 used to explicitly suppress it. No rewriting is done for an unqualified address
2993 that is left untouched.
2995 We start at the second header, skipping our own Received:. This rewriting is
2996 documented as happening *after* recipient addresses are taken from the headers
2997 by the -t command line option. An added Sender: gets rewritten here. */
2999 for (header_line * h = header_list->next; h; h = h->next)
3001 header_line *newh = rewrite_header(h, NULL, NULL, global_rewrite_rules,
3002 rewrite_existflags, TRUE);
3007 /* An RFC 822 (sic) message is not legal unless it has at least one of "to",
3008 "cc", or "bcc". Note that although the minimal examples in RFC 822 show just
3009 "to" or "bcc", the full syntax spec allows "cc" as well. If any resent- header
3010 exists, this applies to the set of resent- headers rather than the normal set.
3012 The requirement for a recipient header has been removed in RFC 2822. At this
3013 point in the code, earlier versions of Exim added a To: header for locally
3014 submitted messages, and an empty Bcc: header for others. In the light of the
3015 changes in RFC 2822, this was dropped in November 2003. */
3018 /* If there is no date header, generate one if the message originates locally
3019 (i.e. not over TCP/IP) and suppress_local_fixups is not set, or if the
3020 submission mode flag is set. Messages without Date: are not valid, but it seems
3021 to be more confusing if Exim adds one to all remotely-originated messages.
3022 As per Message-Id, we prepend if resending, else append.
3025 if ( !date_header_exists
3026 && ((!sender_host_address && !f.suppress_local_fixups) || f.submission_mode))
3027 header_add_at_position(!resents_exist, NULL, FALSE, htype_other,
3028 "%sDate: %s\n", resent_prefix, tod_stamp(tod_full));
3030 search_tidyup(); /* Free any cached resources */
3032 /* Show the complete set of headers if debugging. Note that the first one (the
3033 new Received:) has not yet been set. */
3037 debug_printf(">>Headers after rewriting and local additions:\n");
3038 for (header_line * h = header_list->next; h; h = h->next)
3039 debug_printf("%c %s", h->type, h->text);
3043 /* The headers are now complete in store. If we are running in filter
3044 testing mode, that is all this function does. Return TRUE if the message
3045 ended with a dot. */
3047 if (filter_test != FTEST_NONE)
3049 process_info[process_info_len] = 0;
3050 return message_ended == END_DOT;
3053 /*XXX CHUNKING: need to cancel cutthrough under BDAT, for now. In future,
3054 think more if it could be handled. Cannot do onward CHUNKING unless
3055 inbound is, but inbound chunking ought to be ok with outbound plain.
3056 Could we do onward CHUNKING given inbound CHUNKING?
3058 if (chunking_state > CHUNKING_OFFERED)
3059 cancel_cutthrough_connection(FALSE, US"chunking active");
3061 /* Cutthrough delivery:
3062 We have to create the Received header now rather than at the end of reception,
3063 so the timestamp behaviour is a change to the normal case.
3064 Having created it, send the headers to the destination. */
3066 if (cutthrough.cctx.sock >= 0 && cutthrough.delivery)
3068 if (received_count > received_headers_max)
3070 cancel_cutthrough_connection(TRUE, US"too many headers");
3071 if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
3072 log_write(0, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
3073 "Too many \"Received\" headers",
3075 sender_fullhost ? "H=" : "", sender_fullhost ? sender_fullhost : US"",
3076 sender_ident ? "U=" : "", sender_ident ? sender_ident : US"");
3077 message_id[0] = 0; /* Indicate no message accepted */
3078 smtp_reply = US"550 Too many \"Received\" headers - suspected mail loop";
3079 goto TIDYUP; /* Skip to end of function */
3081 received_header_gen();
3082 add_acl_headers(ACL_WHERE_RCPT, US"MAIL or RCPT");
3083 (void) cutthrough_headers_send();
3087 /* Open a new spool file for the data portion of the message. We need
3088 to access it both via a file descriptor and a stream. Try to make the
3089 directory if it isn't there. */
3091 spool_name = spool_fname(US"input", message_subdir, message_id, US"-D");
3092 DEBUG(D_receive) debug_printf("Data file name: %s\n", spool_name);
3094 if ((data_fd = Uopen(spool_name, O_RDWR|O_CREAT|O_EXCL, SPOOL_MODE)) < 0)
3096 if (errno == ENOENT)
3098 (void) directory_make(spool_directory,
3099 spool_sname(US"input", message_subdir),
3100 INPUT_DIRECTORY_MODE, TRUE);
3101 data_fd = Uopen(spool_name, O_RDWR|O_CREAT|O_EXCL, SPOOL_MODE);
3104 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed to create spool file %s: %s",
3105 spool_name, strerror(errno));
3108 /* Make sure the file's group is the Exim gid, and double-check the mode
3109 because the group setting doesn't always get set automatically. */
3111 if (0 != exim_fchown(data_fd, exim_uid, exim_gid, spool_name))
3112 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
3113 "Failed setting ownership on spool file %s: %s",
3114 spool_name, strerror(errno));
3115 (void)fchmod(data_fd, SPOOL_MODE);
3117 /* We now have data file open. Build a stream for it and lock it. We lock only
3118 the first line of the file (containing the message ID) because otherwise there
3119 are problems when Exim is run under Cygwin (I'm told). See comments in
3120 spool_in.c, where the same locking is done. */
3122 spool_data_file = fdopen(data_fd, "w+");
3123 lock_data.l_type = F_WRLCK;
3124 lock_data.l_whence = SEEK_SET;
3125 lock_data.l_start = 0;
3126 lock_data.l_len = SPOOL_DATA_START_OFFSET;
3128 if (fcntl(data_fd, F_SETLK, &lock_data) < 0)
3129 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Cannot lock %s (%d): %s", spool_name,
3130 errno, strerror(errno));
3132 /* We have an open, locked data file. Write the message id to it to make it
3133 self-identifying. Then read the remainder of the input of this message and
3134 write it to the data file. If the variable next != NULL, it contains the first
3135 data line (which was read as a header but then turned out not to have the right
3136 format); write it (remembering that it might contain binary zeros). The result
3137 of fwrite() isn't inspected; instead we call ferror() below. */
3139 fprintf(spool_data_file, "%s-D\n", message_id);
3142 uschar *s = next->text;
3143 int len = next->slen;
3144 if (fwrite(s, 1, len, spool_data_file) == len) /* "if" for compiler quietening */
3145 body_linecount++; /* Assumes only 1 line */
3148 /* Note that we might already be at end of file, or the logical end of file
3149 (indicated by '.'), or might have encountered an error while writing the
3150 message id or "next" line. */
3152 if (!ferror(spool_data_file) && !(receive_feof)() && message_ended != END_DOT)
3156 message_ended = chunking_state <= CHUNKING_OFFERED
3157 ? read_message_data_smtp(spool_data_file)
3159 ? read_message_bdat_smtp_wire(spool_data_file)
3160 : read_message_bdat_smtp(spool_data_file);
3161 receive_linecount++; /* The terminating "." line */
3164 message_ended = read_message_data(spool_data_file);
3166 receive_linecount += body_linecount; /* For BSMTP errors mainly */
3167 message_linecount += body_linecount;
3169 switch (message_ended)
3171 /* Handle premature termination of SMTP */
3176 Uunlink(spool_name); /* Lose data file when closed */
3177 cancel_cutthrough_connection(TRUE, US"sender closed connection");
3178 message_id[0] = 0; /* Indicate no message accepted */
3179 smtp_reply = handle_lost_connection(US"");
3181 goto TIDYUP; /* Skip to end of function */
3185 /* Handle message that is too big. Don't use host_or_ident() in the log
3186 message; we want to see the ident value even for non-remote messages. */
3189 Uunlink(spool_name); /* Lose the data file when closed */
3190 cancel_cutthrough_connection(TRUE, US"mail too big");
3191 if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
3193 log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
3194 "message too big: read=%d max=%d",
3196 sender_fullhost ? " H=" : "",
3197 sender_fullhost ? sender_fullhost : US"",
3198 sender_ident ? " U=" : "",
3199 sender_ident ? sender_ident : US"",
3201 thismessage_size_limit);
3205 smtp_reply = US"552 Message size exceeds maximum permitted";
3206 message_id[0] = 0; /* Indicate no message accepted */
3207 goto TIDYUP; /* Skip to end of function */
3211 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3212 give_local_error(ERRMESS_TOOBIG,
3213 string_sprintf("message too big (max=%d)", thismessage_size_limit),
3214 US"message rejected: ", error_rc, spool_data_file, header_list);
3215 /* Does not return */
3219 /* Handle bad BDAT protocol sequence */
3222 Uunlink(spool_name); /* Lose the data file when closed */
3223 cancel_cutthrough_connection(TRUE, US"sender protocol error");
3224 smtp_reply = US""; /* Response already sent */
3225 message_id[0] = 0; /* Indicate no message accepted */
3226 goto TIDYUP; /* Skip to end of function */
3230 /* Restore the standard SIGALRM handler for any subsequent processing. (For
3231 example, there may be some expansion in an ACL that uses a timer.) */
3233 os_non_restarting_signal(SIGALRM, sigalrm_handler);
3235 /* The message body has now been read into the data file. Call fflush() to
3236 empty the buffers in C, and then call fsync() to get the data written out onto
3237 the disk, as fflush() doesn't do this (or at least, it isn't documented as
3238 having to do this). If there was an I/O error on either input or output,
3239 attempt to send an error message, and unlink the spool file. For non-SMTP input
3240 we can then give up. Note that for SMTP input we must swallow the remainder of
3241 the input in cases of output errors, since the far end doesn't expect to see
3242 anything until the terminating dot line is sent. */
3244 if (fflush(spool_data_file) == EOF || ferror(spool_data_file) ||
3245 EXIMfsync(fileno(spool_data_file)) < 0 || (receive_ferror)())
3247 uschar *msg_errno = US strerror(errno);
3248 BOOL input_error = (receive_ferror)() != 0;
3249 uschar *msg = string_sprintf("%s error (%s) while receiving message from %s",
3250 input_error? "Input read" : "Spool write",
3252 sender_fullhost ? sender_fullhost : sender_ident);
3254 log_write(0, LOG_MAIN, "Message abandoned: %s", msg);
3255 Uunlink(spool_name); /* Lose the data file */
3256 cancel_cutthrough_connection(TRUE, US"error writing spoolfile");
3261 smtp_reply = US"451 Error while reading input data";
3264 smtp_reply = US"451 Error while writing spool file";
3265 receive_swallow_smtp();
3267 message_id[0] = 0; /* Indicate no message accepted */
3268 goto TIDYUP; /* Skip to end of function */
3273 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3274 give_local_error(ERRMESS_IOERR, msg, US"", error_rc, spool_data_file,
3276 /* Does not return */
3281 /* No I/O errors were encountered while writing the data file. */
3283 DEBUG(D_receive) debug_printf("Data file written for message %s\n", message_id);
3284 if (LOGGING(receive_time)) timesince(&received_time_taken, &received_time);
3287 /* If there were any bad addresses extracted by -t, or there were no recipients
3288 left after -t, send a message to the sender of this message, or write it to
3289 stderr if the error handling option is set that way. Note that there may
3290 legitimately be no recipients for an SMTP message if they have all been removed
3293 We need to rewind the data file in order to read it. In the case of no
3294 recipients or stderr error writing, throw the data file away afterwards, and
3295 exit. (This can't be SMTP, which always ensures there's at least one
3296 syntactically good recipient address.) */
3298 if (extract_recip && (bad_addresses || recipients_count == 0))
3302 if (recipients_count == 0) debug_printf("*** No recipients\n");
3305 debug_printf("*** Bad address(es)\n");
3306 for (error_block * eblock = bad_addresses; eblock; eblock = eblock->next)
3307 debug_printf(" %s: %s\n", eblock->text1, eblock->text2);
3311 log_write(0, LOG_MAIN|LOG_PANIC, "%s %s found in headers",
3312 message_id, bad_addresses ? "bad addresses" : "no recipients");
3314 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3316 /* If configured to send errors to the sender, but this fails, force
3317 a failure error code. We use a special one for no recipients so that it
3318 can be detected by the autoreply transport. Otherwise error_rc is set to
3319 errors_sender_rc, which is EXIT_FAILURE unless -oee was given, in which case
3320 it is EXIT_SUCCESS. */
3322 if (error_handling == ERRORS_SENDER)
3324 if (!moan_to_sender(
3326 ? recipients_list ? ERRMESS_BADADDRESS : ERRMESS_BADNOADDRESS
3327 : extracted_ignored ? ERRMESS_IGADDRESS : ERRMESS_NOADDRESS,
3328 bad_addresses, header_list, spool_data_file, FALSE
3330 error_rc = bad_addresses ? EXIT_FAILURE : EXIT_NORECIPIENTS;
3335 if (extracted_ignored)
3336 fprintf(stderr, "exim: all -t recipients overridden by command line\n");
3338 fprintf(stderr, "exim: no recipients in message\n");
3341 fprintf(stderr, "exim: invalid address%s",
3342 bad_addresses->next ? "es:\n" : ":");
3343 for ( ; bad_addresses; bad_addresses = bad_addresses->next)
3344 fprintf(stderr, " %s: %s\n", bad_addresses->text1,
3345 bad_addresses->text2);
3349 if (recipients_count == 0 || error_handling == ERRORS_STDERR)
3351 Uunlink(spool_name);
3352 (void)fclose(spool_data_file);
3353 exim_exit(error_rc);
3357 /* Data file successfully written. Generate text for the Received: header by
3358 expanding the configured string, and adding a timestamp. By leaving this
3359 operation till now, we ensure that the timestamp is the time that message
3360 reception was completed. However, this is deliberately done before calling the
3361 data ACL and local_scan().
3363 This Received: header may therefore be inspected by the data ACL and by code in
3364 the local_scan() function. When they have run, we update the timestamp to be
3365 the final time of reception.
3367 If there is just one recipient, set up its value in the $received_for variable
3368 for use when we generate the Received: header.
3370 Note: the checking for too many Received: headers is handled by the delivery
3372 /*XXX eventually add excess Received: check for cutthrough case back when classifying them */
3374 if (!received_header->text) /* Non-cutthrough case */
3376 received_header_gen();
3378 /* Set the value of message_body_size for the DATA ACL and for local_scan() */
3380 message_body_size = (fstat(data_fd, &statbuf) == 0)?
3381 statbuf.st_size - SPOOL_DATA_START_OFFSET : -1;
3383 /* If an ACL from any RCPT commands set up any warning headers to add, do so
3384 now, before running the DATA ACL. */
3386 add_acl_headers(ACL_WHERE_RCPT, US"MAIL or RCPT");
3389 message_body_size = (fstat(data_fd, &statbuf) == 0)?
3390 statbuf.st_size - SPOOL_DATA_START_OFFSET : -1;
3392 /* If an ACL is specified for checking things at this stage of reception of a
3393 message, run it, unless all the recipients were removed by "discard" in earlier
3394 ACLs. That is the only case in which recipients_count can be zero at this
3395 stage. Set deliver_datafile to point to the data file so that $message_body and
3396 $message_body_end can be extracted if needed. Allow $recipients in expansions.
3399 deliver_datafile = data_fd;
3402 f.enable_dollar_recipients = TRUE;
3404 if (recipients_count == 0)
3405 blackholed_by = f.recipients_discarded ? US"MAIL ACL" : US"RCPT ACL";
3409 /* Handle interactive SMTP messages */
3411 if (smtp_input && !smtp_batched_input)
3414 #ifndef DISABLE_DKIM
3415 if (!f.dkim_disable_verify)
3417 /* Finish verification */
3418 dkim_exim_verify_finish();
3420 /* Check if we must run the DKIM ACL */
3421 if (acl_smtp_dkim && dkim_verify_signers && *dkim_verify_signers)
3423 uschar * dkim_verify_signers_expanded =
3424 expand_string(dkim_verify_signers);
3425 gstring * results = NULL;
3429 gstring * seen_items = NULL;
3430 int old_pool = store_pool;
3432 store_pool = POOL_PERM; /* Allow created variables to live to data ACL */
3434 if (!(ptr = dkim_verify_signers_expanded))
3435 log_write(0, LOG_MAIN|LOG_PANIC,
3436 "expansion of dkim_verify_signers option failed: %s",
3437 expand_string_message);
3439 /* Default to OK when no items are present */
3441 while ((item = string_nextinlist(&ptr, &signer_sep, NULL, 0)))
3443 /* Prevent running ACL for an empty item */
3444 if (!item || !*item) continue;
3446 /* Only run ACL once for each domain or identity,
3447 no matter how often it appears in the expanded list. */
3451 const uschar * seen_items_list = string_from_gstring(seen_items);
3453 BOOL seen_this_item = FALSE;
3455 while ((seen_item = string_nextinlist(&seen_items_list, &seen_sep,
3457 if (Ustrcmp(seen_item,item) == 0)
3459 seen_this_item = TRUE;
3466 debug_printf("acl_smtp_dkim: skipping signer %s, "
3467 "already seen\n", item);
3471 seen_items = string_catn(seen_items, US":", 1);
3473 seen_items = string_cat(seen_items, item);
3475 rc = dkim_exim_acl_run(item, &results, &user_msg, &log_msg);
3479 debug_printf("acl_smtp_dkim: acl_check returned %d on %s, "
3480 "skipping remaining items\n", rc, item);
3481 cancel_cutthrough_connection(TRUE, US"dkim acl not ok");
3485 dkim_verify_status = string_from_gstring(results);
3486 store_pool = old_pool;
3487 add_acl_headers(ACL_WHERE_DKIM, US"DKIM");
3490 recipients_count = 0;
3491 blackholed_by = US"DKIM ACL";
3493 blackhole_log_msg = string_sprintf(": %s", log_msg);
3497 Uunlink(spool_name);
3498 if (smtp_handle_acl_fail(ACL_WHERE_DKIM, rc, user_msg, log_msg) != 0)
3499 smtp_yield = FALSE; /* No more messages after dropped connection */
3500 smtp_reply = US""; /* Indicate reply already sent */
3501 message_id[0] = 0; /* Indicate no message accepted */
3502 goto TIDYUP; /* Skip to end of function */
3506 dkim_exim_verify_log_all();
3508 #endif /* DISABLE_DKIM */
3510 #ifdef WITH_CONTENT_SCAN
3511 if ( recipients_count > 0
3513 && !run_mime_acl(acl_smtp_mime, &smtp_yield, &smtp_reply, &blackholed_by)
3516 #endif /* WITH_CONTENT_SCAN */
3518 #ifdef SUPPORT_DMARC
3519 dmarc_store_data(from_header);
3522 #ifndef DISABLE_PRDR
3523 if (prdr_requested && recipients_count > 1 && acl_smtp_data_prdr)
3526 int all_fail = FAIL;
3528 smtp_printf("353 PRDR content analysis beginning\r\n", TRUE);
3529 /* Loop through recipients, responses must be in same order received */
3530 for (unsigned int c = 0; recipients_count > c; c++)
3532 uschar * addr= recipients_list[c].address;
3533 uschar * msg= US"PRDR R=<%s> %s";
3536 debug_printf("PRDR processing recipient %s (%d of %d)\n",
3537 addr, c+1, recipients_count);
3538 rc = acl_check(ACL_WHERE_PRDR, addr,
3539 acl_smtp_data_prdr, &user_msg, &log_msg);
3541 /* If any recipient rejected content, indicate it in final message */
3543 /* If all recipients rejected, indicate in final message */
3548 case OK: case DISCARD: code = US"250"; break;
3549 case DEFER: code = US"450"; break;
3550 default: code = US"550"; break;
3552 if (user_msg != NULL)
3553 smtp_user_msg(code, user_msg);
3558 case OK: case DISCARD:
3559 msg = string_sprintf(CS msg, addr, "acceptance"); break;
3561 msg = string_sprintf(CS msg, addr, "temporary refusal"); break;
3563 msg = string_sprintf(CS msg, addr, "refusal"); break;
3565 smtp_user_msg(code, msg);
3567 if (log_msg) log_write(0, LOG_MAIN, "PRDR %s %s", addr, log_msg);
3568 else if (user_msg) log_write(0, LOG_MAIN, "PRDR %s %s", addr, user_msg);
3569 else log_write(0, LOG_MAIN, "%s", CS msg);
3571 if (rc != OK) { receive_remove_recipient(addr); c--; }
3573 /* Set up final message, used if data acl gives OK */
3574 smtp_reply = string_sprintf("%s id=%s message %s",
3575 all_fail == FAIL ? US"550" : US"250",
3578 ? US"rejected for all recipients"
3581 : US"accepted for some recipients");
3582 if (recipients_count == 0)
3584 message_id[0] = 0; /* Indicate no message accepted */
3589 prdr_requested = FALSE;
3590 #endif /* !DISABLE_PRDR */
3592 /* Check the recipients count again, as the MIME ACL might have changed
3595 if (acl_smtp_data != NULL && recipients_count > 0)
3597 rc = acl_check(ACL_WHERE_DATA, NULL, acl_smtp_data, &user_msg, &log_msg);
3598 add_acl_headers(ACL_WHERE_DATA, US"DATA");
3601 recipients_count = 0;
3602 blackholed_by = US"DATA ACL";
3604 blackhole_log_msg = string_sprintf(": %s", log_msg);
3605 cancel_cutthrough_connection(TRUE, US"data acl discard");
3609 Uunlink(spool_name);
3610 cancel_cutthrough_connection(TRUE, US"data acl not ok");
3611 #ifdef WITH_CONTENT_SCAN
3614 #ifdef EXPERIMENTAL_DCC
3617 if (smtp_handle_acl_fail(ACL_WHERE_DATA, rc, user_msg, log_msg) != 0)
3618 smtp_yield = FALSE; /* No more messages after dropped connection */
3619 smtp_reply = US""; /* Indicate reply already sent */
3620 message_id[0] = 0; /* Indicate no message accepted */
3621 goto TIDYUP; /* Skip to end of function */
3626 /* Handle non-SMTP and batch SMTP (i.e. non-interactive) messages. Note that
3627 we cannot take different actions for permanent and temporary rejections. */
3632 #ifdef WITH_CONTENT_SCAN
3633 if ( acl_not_smtp_mime
3634 && !run_mime_acl(acl_not_smtp_mime, &smtp_yield, &smtp_reply,
3638 #endif /* WITH_CONTENT_SCAN */
3642 uschar *user_msg, *log_msg;
3643 f.authentication_local = TRUE;
3644 rc = acl_check(ACL_WHERE_NOTSMTP, NULL, acl_not_smtp, &user_msg, &log_msg);
3647 recipients_count = 0;
3648 blackholed_by = US"non-SMTP ACL";
3650 blackhole_log_msg = string_sprintf(": %s", log_msg);
3654 Uunlink(spool_name);
3655 #ifdef WITH_CONTENT_SCAN
3658 #ifdef EXPERIMENTAL_DCC
3661 /* The ACL can specify where rejections are to be logged, possibly
3662 nowhere. The default is main and reject logs. */
3664 if (log_reject_target)
3665 log_write(0, log_reject_target, "F=<%s> rejected by non-SMTP ACL: %s",
3666 sender_address, log_msg);
3668 if (!user_msg) user_msg = US"local configuration problem";
3669 if (smtp_batched_input)
3670 moan_smtp_batch(NULL, "%d %s", 550, user_msg);
3671 /* Does not return */
3674 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3675 give_local_error(ERRMESS_LOCAL_ACL, user_msg,
3676 US"message rejected by non-SMTP ACL: ", error_rc, spool_data_file,
3678 /* Does not return */
3681 add_acl_headers(ACL_WHERE_NOTSMTP, US"non-SMTP");
3685 /* The applicable ACLs have been run */
3687 if (f.deliver_freeze) frozen_by = US"ACL"; /* for later logging */
3688 if (f.queue_only_policy) queued_by = US"ACL";
3691 #ifdef WITH_CONTENT_SCAN
3695 #ifdef EXPERIMENTAL_DCC
3700 #ifdef HAVE_LOCAL_SCAN
3701 /* The final check on the message is to run the scan_local() function. The
3702 version supplied with Exim always accepts, but this is a hook for sysadmins to
3703 supply their own checking code. The local_scan() function is run even when all
3704 the recipients have been discarded. */
3706 lseek(data_fd, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3708 /* Arrange to catch crashes in local_scan(), so that the -D file gets
3709 deleted, and the incident gets logged. */
3711 if (sigsetjmp(local_scan_env, 1) == 0)
3713 had_local_scan_crash = 0;
3714 os_non_restarting_signal(SIGSEGV, local_scan_crash_handler);
3715 os_non_restarting_signal(SIGFPE, local_scan_crash_handler);
3716 os_non_restarting_signal(SIGILL, local_scan_crash_handler);
3717 os_non_restarting_signal(SIGBUS, local_scan_crash_handler);
3719 DEBUG(D_receive) debug_printf("calling local_scan(); timeout=%d\n",
3720 local_scan_timeout);
3721 local_scan_data = NULL;
3723 had_local_scan_timeout = 0;
3724 os_non_restarting_signal(SIGALRM, local_scan_timeout_handler);
3725 if (local_scan_timeout > 0) ALARM(local_scan_timeout);
3726 rc = local_scan(data_fd, &local_scan_data);
3728 os_non_restarting_signal(SIGALRM, sigalrm_handler);
3730 f.enable_dollar_recipients = FALSE;
3732 store_pool = POOL_MAIN; /* In case changed */
3733 DEBUG(D_receive) debug_printf("local_scan() returned %d %s\n", rc,
3736 os_non_restarting_signal(SIGSEGV, SIG_DFL);
3737 os_non_restarting_signal(SIGFPE, SIG_DFL);
3738 os_non_restarting_signal(SIGILL, SIG_DFL);
3739 os_non_restarting_signal(SIGBUS, SIG_DFL);
3743 if (had_local_scan_crash)
3745 log_write(0, LOG_MAIN|LOG_REJECT, "local_scan() function crashed with "
3746 "signal %d - message temporarily rejected (size %d)",
3747 had_local_scan_crash, message_size);
3748 receive_bomb_out(US"local-scan-error", US"local verification problem");
3749 /* Does not return */
3751 if (had_local_scan_timeout)
3753 log_write(0, LOG_MAIN|LOG_REJECT, "local_scan() function timed out - "
3754 "message temporarily rejected (size %d)", message_size);
3755 receive_bomb_out(US"local-scan-timeout", US"local verification problem");
3756 /* Does not return */
3760 /* The length check is paranoia against some runaway code, and also because
3761 (for a success return) lines in the spool file are read into big_buffer. */
3763 if (local_scan_data)
3765 int len = Ustrlen(local_scan_data);
3766 if (len > LOCAL_SCAN_MAX_RETURN) len = LOCAL_SCAN_MAX_RETURN;
3767 local_scan_data = string_copyn(local_scan_data, len);
3770 if (rc == LOCAL_SCAN_ACCEPT_FREEZE)
3772 if (!f.deliver_freeze) /* ACL might have already frozen */
3774 f.deliver_freeze = TRUE;
3775 deliver_frozen_at = time(NULL);
3776 frozen_by = US"local_scan()";
3778 rc = LOCAL_SCAN_ACCEPT;
3780 else if (rc == LOCAL_SCAN_ACCEPT_QUEUE)
3782 if (!f.queue_only_policy) /* ACL might have already queued */
3784 f.queue_only_policy = TRUE;
3785 queued_by = US"local_scan()";
3787 rc = LOCAL_SCAN_ACCEPT;
3790 /* Message accepted: remove newlines in local_scan_data because otherwise
3791 the spool file gets corrupted. Ensure that all recipients are qualified. */
3793 if (rc == LOCAL_SCAN_ACCEPT)
3795 if (local_scan_data)
3796 for (uschar * s = local_scan_data; *s != 0; s++) if (*s == '\n') *s = ' ';
3797 for (int i = 0; i < recipients_count; i++)
3799 recipient_item *r = recipients_list + i;
3800 r->address = rewrite_address_qualify(r->address, TRUE);
3802 r->errors_to = rewrite_address_qualify(r->errors_to, TRUE);
3804 if (recipients_count == 0 && !blackholed_by)
3805 blackholed_by = US"local_scan";
3808 /* Message rejected: newlines permitted in local_scan_data to generate
3809 multiline SMTP responses. */
3813 uschar *istemp = US"";
3817 errmsg = local_scan_data;
3819 Uunlink(spool_name); /* Cancel this message */
3823 log_write(0, LOG_MAIN, "invalid return %d from local_scan(). Temporary "
3824 "rejection given", rc);
3827 case LOCAL_SCAN_REJECT_NOLOGHDR:
3828 BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
3831 case LOCAL_SCAN_REJECT:
3832 smtp_code = US"550";
3833 if (!errmsg) errmsg = US"Administrative prohibition";
3836 case LOCAL_SCAN_TEMPREJECT_NOLOGHDR:
3837 BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
3840 case LOCAL_SCAN_TEMPREJECT:
3842 smtp_code = US"451";
3843 if (!errmsg) errmsg = US"Temporary local problem";
3844 istemp = US"temporarily ";
3848 g = string_append(NULL, 2, US"F=",
3849 sender_address[0] == 0 ? US"<>" : sender_address);
3850 g = add_host_info_for_log(g);
3852 log_write(0, LOG_MAIN|LOG_REJECT, "%s %srejected by local_scan(): %.256s",
3853 string_from_gstring(g), istemp, string_printing(errmsg));
3856 if (!smtp_batched_input)
3858 smtp_respond(smtp_code, 3, TRUE, errmsg);
3859 message_id[0] = 0; /* Indicate no message accepted */
3860 smtp_reply = US""; /* Indicate reply already sent */
3861 goto TIDYUP; /* Skip to end of function */
3864 moan_smtp_batch(NULL, "%s %s", smtp_code, errmsg);
3865 /* Does not return */
3868 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3869 give_local_error(ERRMESS_LOCAL_SCAN, errmsg,
3870 US"message rejected by local scan code: ", error_rc, spool_data_file,
3872 /* Does not return */
3876 /* Reset signal handlers to ignore signals that previously would have caused
3877 the message to be abandoned. */
3879 signal(SIGTERM, SIG_IGN);
3880 signal(SIGINT, SIG_IGN);
3881 #endif /* HAVE_LOCAL_SCAN */
3884 /* Ensure the first time flag is set in the newly-received message. */
3886 f.deliver_firsttime = TRUE;
3888 #ifdef EXPERIMENTAL_BRIGHTMAIL
3890 { /* rewind data file */
3891 lseek(data_fd, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3892 bmi_verdicts = bmi_process_message(header_list, data_fd);
3896 /* Update the timestamp in our Received: header to account for any time taken by
3897 an ACL or by local_scan(). The new time is the time that all reception
3898 processing is complete. */
3900 timestamp = expand_string(US"${tod_full}");
3901 tslen = Ustrlen(timestamp);
3903 memcpy(received_header->text + received_header->slen - tslen - 1,
3906 /* In MUA wrapper mode, ignore queueing actions set by ACL or local_scan() */
3910 f.deliver_freeze = FALSE;
3911 f.queue_only_policy = FALSE;
3914 /* Keep the data file open until we have written the header file, in order to
3915 hold onto the lock. In a -bh run, or if the message is to be blackholed, we
3916 don't write the header file, and we unlink the data file. If writing the header
3917 file fails, we have failed to accept this message. */
3919 if (host_checking || blackholed_by)
3921 Uunlink(spool_name);
3922 msg_size = 0; /* Compute size for log line */
3923 for (header_line * h = header_list; h; h = h->next)
3924 if (h->type != '*') msg_size += h->slen;
3927 /* Write the -H file */
3930 if ((msg_size = spool_write_header(message_id, SW_RECEIVING, &errmsg)) < 0)
3932 log_write(0, LOG_MAIN, "Message abandoned: %s", errmsg);
3933 Uunlink(spool_name); /* Lose the data file */
3937 smtp_reply = US"451 Error in writing spool file";
3938 message_id[0] = 0; /* Indicate no message accepted */
3943 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3944 give_local_error(ERRMESS_IOERR, errmsg, US"", error_rc, spool_data_file,
3946 /* Does not return */
3951 /* The message has now been successfully received. */
3953 receive_messagecount++;
3955 /* Add data size to written header size. We do not count the initial file name
3956 that is in the file, but we do add one extra for the notional blank line that
3957 precedes the data. This total differs from message_size in that it include the
3958 added Received: header and any other headers that got created locally. */
3960 if (fflush(spool_data_file))
3962 errmsg = string_sprintf("Spool write error: %s", strerror(errno));
3963 log_write(0, LOG_MAIN, "%s\n", errmsg);
3964 Uunlink(spool_name); /* Lose the data file */
3968 smtp_reply = US"451 Error in writing spool file";
3969 message_id[0] = 0; /* Indicate no message accepted */
3974 fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
3975 give_local_error(ERRMESS_IOERR, errmsg, US"", error_rc, spool_data_file,
3977 /* Does not return */
3980 fstat(data_fd, &statbuf);
3982 msg_size += statbuf.st_size - SPOOL_DATA_START_OFFSET + 1;
3984 /* Generate a "message received" log entry. We do this by building up a dynamic
3985 string as required. We log the arrival of a new message while the
3986 file is still locked, just in case the machine is *really* fast, and delivers
3987 it first! Include any message id that is in the message - since the syntax of a
3988 message id is actually an addr-spec, we can use the parse routine to canonicalize
3991 rcvd_log_reset_point = store_mark();
3992 g = string_get(256);
3994 g = string_append(g, 2,
3995 fake_response == FAIL ? US"(= " : US"<= ",
3996 sender_address[0] == 0 ? US"<>" : sender_address);
3997 if (message_reference)
3998 g = string_append(g, 2, US" R=", message_reference);
4000 g = add_host_info_for_log(g);
4003 if (LOGGING(tls_cipher) && tls_in.cipher)
4005 g = string_append(g, 2, US" X=", tls_in.cipher);
4006 # ifdef EXPERIMENTAL_TLS_RESUME
4007 if (LOGGING(tls_resumption) && tls_in.resumption & RESUME_USED)
4008 g = string_catn(g, US"*", 1);
4011 if (LOGGING(tls_certificate_verified) && tls_in.cipher)
4012 g = string_append(g, 2, US" CV=", tls_in.certificate_verified ? "yes":"no");
4013 if (LOGGING(tls_peerdn) && tls_in.peerdn)
4014 g = string_append(g, 3, US" DN=\"", string_printing(tls_in.peerdn), US"\"");
4015 if (LOGGING(tls_sni) && tls_in.sni)
4016 g = string_append(g, 2, US" SNI=", string_printing2(tls_in.sni, SP_TAB|SP_SPACE));
4019 if (sender_host_authenticated)
4021 g = string_append(g, 2, US" A=", sender_host_authenticated);
4022 if (authenticated_id)
4024 g = string_append(g, 2, US":", authenticated_id);
4025 if (LOGGING(smtp_mailauth) && authenticated_sender)
4026 g = string_append(g, 2, US":", authenticated_sender);
4030 #ifndef DISABLE_PRDR
4032 g = string_catn(g, US" PRDR", 5);
4035 #ifdef SUPPORT_PROXY
4036 if (proxy_session && LOGGING(proxy))
4037 g = string_append(g, 2, US" PRX=", proxy_local_address);
4040 if (chunking_state > CHUNKING_OFFERED)
4041 g = string_catn(g, US" K", 2);
4043 g = string_fmt_append(g, " S=%d", msg_size);
4045 /* log 8BITMIME mode announced in MAIL_FROM
4049 if (LOGGING(8bitmime))
4050 g = string_fmt_append(g, " M8S=%d", body_8bitmime);
4052 #ifndef DISABLE_DKIM
4053 if (LOGGING(dkim) && dkim_verify_overall)
4054 g = string_append(g, 2, US" DKIM=", dkim_verify_overall);
4055 # ifdef EXPERIMENTAL_ARC
4056 if (LOGGING(dkim) && arc_state && Ustrcmp(arc_state, "pass") == 0)
4057 g = string_catn(g, US" ARC", 4);
4061 if (LOGGING(receive_time))
4062 g = string_append(g, 2, US" RT=", string_timediff(&received_time_taken));
4065 g = string_append(g, 2, US" Q=", queue_name);
4067 /* If an addr-spec in a message-id contains a quoted string, it can contain
4068 any characters except " \ and CR and so in particular it can contain NL!
4069 Therefore, make sure we use a printing-characters only version for the log.
4070 Also, allow for domain literals in the message id. */
4072 if ( LOGGING(msg_id) && msgid_header
4073 && (LOGGING(msg_id_created) || !msgid_header_newly_created)
4077 BOOL save_allow_domain_literals = allow_domain_literals;
4078 allow_domain_literals = TRUE;
4079 old_id = parse_extract_address(Ustrchr(msgid_header->text, ':') + 1,
4080 &errmsg, &start, &end, &domain, FALSE);
4081 allow_domain_literals = save_allow_domain_literals;
4083 g = string_append(g, 2,
4084 msgid_header_newly_created ? US" id*=" : US" id=",
4085 string_printing(old_id));
4088 /* If subject logging is turned on, create suitable printing-character
4089 text. By expanding $h_subject: we make use of the MIME decoding. */
4091 if (LOGGING(subject) && subject_header)
4093 uschar *p = big_buffer;
4094 uschar *ss = expand_string(US"$h_subject:");
4096 /* Backslash-quote any double quotes or backslashes so as to make a
4097 a C-like string, and turn any non-printers into escape sequences. */
4100 if (*ss != 0) for (int i = 0; i < 100 && ss[i] != 0; i++)
4102 if (ss[i] == '\"' || ss[i] == '\\') *p++ = '\\';
4107 g = string_append(g, 2, US" T=", string_printing(big_buffer));
4110 /* Terminate the string: string_cat() and string_append() leave room, but do
4111 not put the zero in. */
4113 (void) string_from_gstring(g);
4115 /* Create a message log file if message logs are being used and this message is
4116 not blackholed. Write the reception stuff to it. We used to leave message log
4117 creation until the first delivery, but this has proved confusing for some
4120 if (message_logs && !blackholed_by)
4123 uschar * m_name = spool_fname(US"msglog", message_subdir, message_id, US"");
4125 if ( (fd = Uopen(m_name, O_WRONLY|O_APPEND|O_CREAT, SPOOL_MODE)) < 0
4129 (void)directory_make(spool_directory,
4130 spool_sname(US"msglog", message_subdir),
4131 MSGLOG_DIRECTORY_MODE, TRUE);
4132 fd = Uopen(m_name, O_WRONLY|O_APPEND|O_CREAT, SPOOL_MODE);
4136 log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't open message log %s: %s",
4137 m_name, strerror(errno));
4140 FILE *message_log = fdopen(fd, "a");
4143 log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't fdopen message log %s: %s",
4144 m_name, strerror(errno));
4149 uschar *now = tod_stamp(tod_log);
4150 fprintf(message_log, "%s Received from %s\n", now, g->s+3);
4151 if (f.deliver_freeze) fprintf(message_log, "%s frozen by %s\n", now,
4153 if (f.queue_only_policy) fprintf(message_log,
4154 "%s no immediate delivery: queued%s%s by %s\n", now,
4155 *queue_name ? " in " : "", *queue_name ? CS queue_name : "",
4157 (void)fclose(message_log);
4162 /* Everything has now been done for a successful message except logging its
4163 arrival, and outputting an SMTP response. While writing to the log, set a flag
4164 to cause a call to receive_bomb_out() if the log cannot be opened. */
4166 f.receive_call_bombout = TRUE;
4168 /* Before sending an SMTP response in a TCP/IP session, we check to see if the
4169 connection has gone away. This can only be done if there is no unconsumed input
4170 waiting in the local input buffer. We can test for this by calling
4171 receive_smtp_buffered(). RFC 2920 (pipelining) explicitly allows for additional
4172 input to be sent following the final dot, so the presence of following input is
4175 If the connection is still present, but there is no unread input for the
4176 socket, the result of a select() call will be zero. If, however, the connection
4177 has gone away, or if there is pending input, the result of select() will be
4178 non-zero. The two cases can be distinguished by trying to read the next input
4179 character. If we succeed, we can unread it so that it remains in the local
4180 buffer for handling later. If not, the connection has been lost.
4182 Of course, since TCP/IP is asynchronous, there is always a chance that the
4183 connection will vanish between the time of this test and the sending of the
4184 response, but the chance of this happening should be small. */
4186 if (smtp_input && sender_host_address && !f.sender_host_notsocket &&
4187 !receive_smtp_buffered())
4190 fd_set select_check;
4191 FD_ZERO(&select_check);
4192 FD_SET(fileno(smtp_in), &select_check);
4196 if (select(fileno(smtp_in) + 1, &select_check, NULL, NULL, &tv) != 0)
4198 int c = (receive_getc)(GETC_BUFFER_UNLIMITED);
4199 if (c != EOF) (receive_ungetc)(c); else
4201 smtp_notquit_exit(US"connection-lost", NULL, NULL);
4202 smtp_reply = US""; /* No attempt to send a response */
4203 smtp_yield = FALSE; /* Nothing more on this connection */
4205 /* Re-use the log line workspace */
4208 g = string_cat(g, US"SMTP connection lost after final dot");
4209 g = add_host_info_for_log(g);
4210 log_write(0, LOG_MAIN, "%s", string_from_gstring(g));
4212 /* Delete the files for this aborted message. */
4214 Uunlink(spool_name);
4215 Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
4216 Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
4223 /* The connection has not gone away; we really are going to take responsibility
4224 for this message. */
4226 /* Cutthrough - had sender last-dot; assume we've sent (or bufferred) all
4229 Send dot onward. If accepted, wipe the spooled files, log as delivered and accept
4230 the sender's dot (below).
4231 If rejected: copy response to sender, wipe the spooled files, log appropriately.
4232 If temp-reject: normally accept to sender, keep the spooled file - unless defer=pass
4233 in which case pass temp-reject back to initiator and dump the files.
4235 Having the normal spool files lets us do data-filtering, and store/forward on temp-reject.
4237 XXX We do not handle queue-only, freezing, or blackholes.
4239 if(cutthrough.cctx.sock >= 0 && cutthrough.delivery)
4241 uschar * msg = cutthrough_finaldot(); /* Ask the target system to accept the message */
4242 /* Logging was done in finaldot() */
4245 case '2': /* Accept. Do the same to the source; dump any spoolfiles. */
4246 cutthrough_done = ACCEPTED;
4247 break; /* message_id needed for SMTP accept below */
4249 case '4': /* Temp-reject. Keep spoolfiles and accept, unless defer-pass mode.
4250 ... for which, pass back the exact error */
4251 if (cutthrough.defer_pass) smtp_reply = string_copy_perm(msg, TRUE);
4252 cutthrough_done = TMP_REJ; /* Avoid the usual immediate delivery attempt */
4253 break; /* message_id needed for SMTP accept below */
4255 default: /* Unknown response, or error. Treat as temp-reject. */
4256 if (cutthrough.defer_pass) smtp_reply = US"450 Onward transmission not accepted";
4257 cutthrough_done = TMP_REJ; /* Avoid the usual immediate delivery attempt */
4258 break; /* message_id needed for SMTP accept below */
4260 case '5': /* Perm-reject. Do the same to the source. Dump any spoolfiles */
4261 smtp_reply = string_copy_perm(msg, TRUE); /* Pass on the exact error */
4262 cutthrough_done = PERM_REJ;
4267 #ifndef DISABLE_PRDR
4268 if(!smtp_reply || prdr_requested)
4273 log_write(0, LOG_MAIN |
4274 (LOGGING(received_recipients) ? LOG_RECIPIENTS : 0) |
4275 (LOGGING(received_sender) ? LOG_SENDER : 0),
4278 /* Log any control actions taken by an ACL or local_scan(). */
4280 if (f.deliver_freeze) log_write(0, LOG_MAIN, "frozen by %s", frozen_by);
4281 if (f.queue_only_policy) log_write(L_delay_delivery, LOG_MAIN,
4282 "no immediate delivery: queued%s%s by %s",
4283 *queue_name ? " in " : "", *queue_name ? CS queue_name : "",
4286 f.receive_call_bombout = FALSE;
4288 /* The store for the main log message can be reused */
4289 rcvd_log_reset_point = store_reset(rcvd_log_reset_point);
4291 /* If the message is frozen, and freeze_tell is set, do the telling. */
4293 if (f.deliver_freeze && freeze_tell && freeze_tell[0])
4294 moan_tell_someone(freeze_tell, NULL, US"Message frozen on arrival",
4295 "Message %s was frozen on arrival by %s.\nThe sender is <%s>.\n",
4296 message_id, frozen_by, sender_address);
4299 /* Either a message has been successfully received and written to the two spool
4300 files, or an error in writing the spool has occurred for an SMTP message, or
4301 an SMTP message has been rejected for policy reasons, or a message was passed on
4302 by cutthrough delivery. (For a non-SMTP message we will have already given up
4303 because there's no point in carrying on!) For non-cutthrough we must now close
4304 (and thereby unlock) the data file. In the successful case, this leaves the
4305 message on the spool, ready for delivery. In the error case, the spool file will
4306 be deleted. Then tidy up store, interact with an SMTP call if necessary, and
4309 For cutthrough we hold the data file locked until we have deleted it, otherwise
4310 a queue-runner could grab it in the window.
4312 A fflush() was done earlier in the expectation that any write errors on the
4313 data file will be flushed(!) out thereby. Nevertheless, it is theoretically
4314 possible for fclose() to fail - but what to do? What has happened to the lock
4315 if this happens? We can at least log it; if it is observed on some platform
4316 then we can think about properly declaring the message not-received. */
4320 /* In SMTP sessions we may receive several messages in one connection. After
4321 each one, we wait for the clock to tick at the level of message-id granularity.
4322 This is so that the combination of time+pid is unique, even on systems where the
4323 pid can be re-used within our time interval. We can't shorten the interval
4324 without re-designing the message-id. See comments above where the message id is
4325 created. This is Something For The Future.
4326 Do this wait any time we have created a message-id, even if we rejected the
4327 message. This gives unique IDs for logging done by ACLs. */
4329 if (id_resolution != 0)
4331 message_id_tv.tv_usec = (message_id_tv.tv_usec/id_resolution) * id_resolution;
4332 exim_wait_tick(&message_id_tv, id_resolution);
4337 process_info[process_info_len] = 0; /* Remove message id */
4338 if (spool_data_file && cutthrough_done == NOT_TRIED)
4340 if (fclose(spool_data_file)) /* Frees the lock */
4341 log_write(0, LOG_MAIN|LOG_PANIC,
4342 "spoolfile error on close: %s", strerror(errno));
4343 spool_data_file = NULL;
4346 /* Now reset signal handlers to their defaults */
4348 signal(SIGTERM, SIG_DFL);
4349 signal(SIGINT, SIG_DFL);
4351 /* Tell an SMTP caller the state of play, and arrange to return the SMTP return
4352 value, which defaults TRUE - meaning there may be more incoming messages from
4353 this connection. For non-SMTP callers (where there is only ever one message),
4354 the default is FALSE. */
4360 /* Handle interactive SMTP callers. After several kinds of error, smtp_reply
4361 is set to the response that should be sent. When it is NULL, we generate
4362 default responses. After an ACL error or local_scan() error, the response has
4363 already been sent, and smtp_reply is an empty string to indicate this. */
4365 if (!smtp_batched_input)
4369 if (fake_response != OK)
4370 smtp_respond(fake_response == DEFER ? US"450" : US"550",
4371 3, TRUE, fake_response_text);
4373 /* An OK response is required; use "message" text if present. */
4377 uschar *code = US"250";
4379 smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
4380 smtp_respond(code, len, TRUE, user_msg);
4383 /* Default OK response */
4385 else if (chunking_state > CHUNKING_OFFERED)
4387 smtp_printf("250- %u byte chunk, total %d\r\n250 OK id=%s\r\n", FALSE,
4388 chunking_datasize, message_size+message_linecount, message_id);
4389 chunking_state = CHUNKING_OFFERED;
4392 smtp_printf("250 OK id=%s\r\n", FALSE, message_id);
4396 "\n**** SMTP testing: that is not a real message id!\n\n");
4399 /* smtp_reply is set non-empty */
4401 else if (smtp_reply[0] != 0)
4402 if (fake_response != OK && smtp_reply[0] == '2')
4403 smtp_respond(fake_response == DEFER ? US"450" : US"550", 3, TRUE,
4404 fake_response_text);
4406 smtp_printf("%.1024s\r\n", FALSE, smtp_reply);
4408 switch (cutthrough_done)
4411 log_write(0, LOG_MAIN, "Completed");/* Delivery was done */
4413 /* Delete spool files */
4414 Uunlink(spool_name);
4415 Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
4416 Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
4420 if (cutthrough.defer_pass)
4422 Uunlink(spool_name);
4423 Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
4424 Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
4429 if (cutthrough_done != NOT_TRIED)
4431 if (spool_data_file)
4433 (void) fclose(spool_data_file); /* Frees the lock; do not care if error */
4434 spool_data_file = NULL;
4436 message_id[0] = 0; /* Prevent a delivery from starting */
4437 cutthrough.delivery = cutthrough.callout_hold_only = FALSE;
4438 cutthrough.defer_pass = FALSE;
4442 /* For batched SMTP, generate an error message on failure, and do
4443 nothing on success. The function moan_smtp_batch() does not return -
4444 it exits from the program with a non-zero return code. */
4446 else if (smtp_reply)
4447 moan_smtp_batch(NULL, "%s", smtp_reply);
4451 /* If blackholing, we can immediately log this message's sad fate. The data
4452 file has already been unlinked, and the header file was never written to disk.
4453 We must now indicate that nothing was received, to prevent a delivery from
4458 const uschar *detail =
4459 #ifdef HAVE_LOCAL_SCAN
4460 local_scan_data ? string_printing(local_scan_data) :
4462 string_sprintf("(%s discarded recipients)", blackholed_by);
4463 log_write(0, LOG_MAIN, "=> blackhole %s%s", detail, blackhole_log_msg);
4464 log_write(0, LOG_MAIN, "Completed");
4468 /* Reset headers so that logging of rejects for a subsequent message doesn't
4469 include them. It is also important to set header_last = NULL before exiting
4470 from this function, as this prevents certain rewrites that might happen during
4471 subsequent verifying (of another incoming message) from trying to add headers
4472 when they shouldn't. */
4474 header_list = header_last = NULL;
4476 return yield; /* TRUE if more messages (SMTP only) */
4479 /* End of receive.c */