1 # This file is the basis of the main makefile for Exim and friends. The
2 # makefile at the top level arranges to build the main makefile by calling
3 # scripts/Configure-Makefile from within the build directory. This
4 # concatenates the configuration settings from Local/Makefile and other,
5 # optional, Local/* files at the front of this file, to create Makefile in the
8 # Copyright (c) The Exim Maintainers 1995 - 2024
9 # SPDX-License-Identifier: GPL-2.0-or-later
14 EDITME = ../Local/Makefile
15 EXIMON_EDITME = ../Local/eximon.conf
17 # The compiler used for linking is normally the same as the compiler used for
18 # compiling. However, by giving it a different name, we can override it from
19 # the command line, and this is helpful for certain types of testing.
23 # The compile commands can be very long. To make the output look better,
24 # they are not normally echoed in full. To get full echoing, the caller
25 # must set FULLECHO='' on the command line and call make with -e. We default
26 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
31 # The default target double-checks the existence of $(EDITME) and then arranges
32 # to touch it if it exists and any of the optional configuration files, which
33 # depend on the os or the architecture, have been altered. The same sub-target
34 # does the same thing for the eximon configuration file if it exists. Then
35 # there is a check that the Makefile (the one built from this file) is
36 # up-to-date. Then the os-specific source files and the C configuration file
37 # are set up, and finally it goes to the main Exim target.
39 all: utils exim dynmodules
40 config: $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c
42 exim_openssl exim_gnutls: clean exim
46 @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
47 $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
48 $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
52 @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
53 $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
54 $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
56 if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
61 @echo "*** Please create Local/Makefile by copying src/EDITME and making"
62 @echo "*** appropriate changes for your site."
68 @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
69 @echo "*** appropriate changes for your site."
71 @test ! -d ../Local && mkdir ../Local
74 # Check that the local Makefile is up-to-date
76 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
77 $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
79 @echo "*** Makefile needs rebuilding"
80 @echo "*** Please run \"make makefile\" at top level"
84 # Build (link) the os.h file
86 os.h: $(SCRIPTS)/Configure-os.h \
92 $(SHELL) $(SCRIPTS)/Configure-os.h
97 $(SCRIPTS)/Configure-os.c \
102 $(SHELL) $(SCRIPTS)/Configure-os.c
104 # Build the config.h file.
106 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
107 $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
109 # Build the builtin-macros data struct
111 MACRO_HSRC = macro_predef.h os.h globals.h config.h macros.h path_max.h \
112 routers/accept.h routers/dnslookup.h routers/ipliteral.h \
113 routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
116 OBJ_MACRO = macro_predef.o \
117 macro-globals.o macro-readconf.o macro-expand.o macro-route.o \
118 macro-transport.o macro-drtables.o macro-acl.o macro-tls.o \
119 macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
120 macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
121 macro-manualroute.o macro-queryprogram.o macro-redirect.o \
122 macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl.o \
123 macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \
124 macro-dkim.o macro-malware.o macro-signing.o
126 $(OBJ_MACRO): $(MACRO_HSRC)
128 macro_predef.o : macro_predef.c
129 @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
130 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
131 macro-globals.o : globals.c
132 @echo "$(CC) -DMACRO_PREDEF globals.c"
133 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
134 macro-readconf.o : readconf.c
135 @echo "$(CC) -DMACRO_PREDEF readconf.c"
136 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
137 macro-expand.o : expand.c
138 @echo "$(CC) -DMACRO_PREDEF expand.c"
139 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ expand.c
140 macro-route.o : route.c
141 @echo "$(CC) -DMACRO_PREDEF route.c"
142 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
143 macro-transport.o: transport.c
144 @echo "$(CC) -DMACRO_PREDEF transport.c"
145 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
146 macro-drtables.o : drtables.c
147 @echo "$(CC) -DMACRO_PREDEF drtables.c"
148 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
150 @echo "$(CC) -DMACRO_PREDEF acl.c"
151 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ acl.c
152 macro-tls.o: tls.c tls-gnu.c tls-openssl.c
153 @echo "$(CC) -DMACRO_PREDEF tls.c"
154 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c
155 macro-appendfile.o : transports/appendfile.c
156 @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
157 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
158 macro-autoreply.o : transports/autoreply.c
159 @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
160 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
161 macro-lmtp.o: transports/lmtp.c
162 @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
163 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
164 macro-pipe.o : transports/pipe.c
165 @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
166 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
167 macro-queuefile.o : transports/queuefile.c
168 @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
169 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
170 macro-smtp.o : transports/smtp.c
171 @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
172 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
173 macro-accept.o : routers/accept.c
174 @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
175 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
176 macro-dnslookup.o : routers/dnslookup.c
177 @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
178 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
179 macro-ipliteral.o : routers/ipliteral.c
180 @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
181 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
182 macro-iplookup.o : routers/iplookup.c
183 @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
184 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
185 macro-manualroute.o : routers/manualroute.c
186 @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
187 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
188 macro-queryprogram.o : routers/queryprogram.c
189 @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
190 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
191 macro-redirect.o : routers/redirect.c
192 @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
193 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
194 macro-auth-spa.o : auths/auth-spa.c
195 @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
196 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
197 macro-cram_md5.o : auths/cram_md5.c
198 @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
199 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
200 macro-cyrus_sasl.o : auths/cyrus_sasl.c
201 @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
202 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
203 macro-dovecot.o: auths/dovecot.c
204 @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
205 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
206 macro-external.o: auths/external.c
207 @echo "$(CC) -DMACRO_PREDEF auths/external.c"
208 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c
209 macro-gsasl.o : auths/gsasl.c
210 @echo "$(CC) -DMACRO_PREDEF auths/gsasl.c"
211 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl.c
212 macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
213 @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
214 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
215 macro-plaintext.o : auths/plaintext.c
216 @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
217 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
218 macro-spa.o : auths/spa.c
219 @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
220 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
221 macro-authtls.o: auths/tls.c
222 @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
223 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
225 @echo "$(CC) -DMACRO_PREDEF dkim.c"
226 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
227 macro-malware.o: malware.c
228 @echo "$(CC) -DMACRO_PREDEF malware.c"
229 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
230 macro-signing.o: pdkim/signing.c
231 @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c"
232 $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c
234 macro_predef: $(OBJ_MACRO)
235 @echo "$(LNCC) -o $@"
236 $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
238 macro.c: macro_predef
239 ./macro_predef > macro.c
241 # This target is recognized specially by GNU make. It records those targets
242 # that do not correspond to files that are being built and which should
243 # therefore always be run, even if the files exist. This shouldn't in fact be a
244 # problem, but it does no harm. Other make programs will just ignore this.
246 .PHONY: all config utils \
247 buildauths buildlookups buildpdkim buildrouters \
248 buildtransports buildmisc dynmodules checklocalmake clean
251 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
252 exigrep eximstats exipick exiqgrep exiqsumm \
253 transport-filter.pl exim_checkaccess \
254 exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb \
255 exim_lock exim_msgdate exim_id_update
258 # Targets for special-purpose configuration header builders
259 buildconfig: buildconfig.c
260 @echo "$(CC) buildconfig.c"
261 $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
264 # Target for the exicyclog utility script
265 exicyclog: config ../src/exicyclog.src
267 @. ./version.sh && sed \
268 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
271 -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
272 -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
273 -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
274 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
275 -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
276 -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
277 -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
278 -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
279 -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
280 -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
281 -e "s?MV_COMMAND?$(MV_COMMAND)?" \
282 -e "s?RM_COMMAND?$(RM_COMMAND)?" \
283 -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
284 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
285 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
286 ../src/exicyclog.src > exicyclog-t
287 @mv exicyclog-t exicyclog
289 @./exicyclog -v 2>&1 >/dev/null
290 @echo ">>> exicyclog script built"
292 # Target for the exinext utility script
293 exinext: config ../src/exinext.src
295 @. ./version.sh && sed \
296 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
299 -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
300 -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
301 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
302 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
303 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
304 ../src/exinext.src > exinext-t
305 @mv exinext-t exinext
307 @./exinext -v 2>&1 >/dev/null
308 @echo ">>> exinext script built"
310 # Target for the exiwhat utility script
311 exiwhat: config ../src/exiwhat.src
313 @. ./version.sh && sed \
314 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
317 -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
318 -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
319 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
320 -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
321 -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
322 -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
323 -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
324 -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
325 -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
326 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
327 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
328 -e "s?RM_COMMAND?$(RM_COMMAND)?" \
329 ../src/exiwhat.src > exiwhat-t
330 @mv exiwhat-t exiwhat
332 @./exiwhat -v 2>&1 >/dev/null
333 @echo ">>> exiwhat script built"
335 # Target for the exim_checkaccess utility script
336 exim_checkaccess: config ../src/exim_checkaccess.src
337 @rm -f exim_checkaccess
338 @. ./version.sh && sed \
339 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
342 -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
343 -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
344 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
345 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
346 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
347 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
348 ../src/exim_checkaccess.src > exim_checkaccess-t
349 @mv exim_checkaccess-t exim_checkaccess
350 @chmod a+x exim_checkaccess
351 # @./exim_checkaccess -v 2>&1 >/dev/null
352 @echo ">>> exim_checkaccess script built"; echo ""
354 # Target for the Exim monitor start-up script
355 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
358 $(SHELL) $(SCRIPTS)/Configure-eximon
359 @. ./version.sh && sed \
360 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
363 -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
364 -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
365 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
366 -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
367 -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
368 -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
369 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
370 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
371 ../src/eximon.src >> eximon
372 @./eximon -v 2>&1 >/dev/null
373 @echo ">>> eximon script built"; echo ""
375 # Targets for utilities; these are all Perl scripts that have to get the
376 # location of Perl put in them. A few need other things as well.
378 exigrep: config ../src/exigrep.src
380 @. ./version.sh && sed \
381 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
384 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
385 -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
386 -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
387 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
388 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
389 ../src/exigrep.src > exigrep-t
390 @mv exigrep-t exigrep
392 @./exigrep --version 2>&1 >/dev/null
393 @echo ">>> exigrep script built"
395 exim_msgdate: config ../src/exim_msgdate.src
397 @. ./version.sh && sed \
398 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
401 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
402 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
403 -e "s?BASE_62?$${BASE_62:-62}?" \
404 -e "s?CONFIGURE_FILE\"?$(CONFIGURE_FILE)\"?" \
405 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
406 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
407 ../src/exim_msgdate.src > exim_msgdate-t
408 @mv exim_msgdate-t exim_msgdate
409 @chmod a+x exim_msgdate
410 @./exim_msgdate -v 2>&1 >/dev/null
411 @echo ">>> exim_msgdate script built"
413 eximstats: config ../src/eximstats.src
415 @. ./version.sh && sed \
416 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
417 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
418 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
419 ../src/eximstats.src > eximstats-t
420 @mv eximstats-t eximstats
422 @./eximstats -v 2>&1 >/dev/null
423 @echo ">>> eximstats script built"
425 exiqgrep: config ../src/exiqgrep.src
427 @. ./version.sh && sed \
428 -e "s?PROCESSED_FLAG?This file has been so processed.?"\
431 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
432 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
433 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
434 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
435 ../src/exiqgrep.src > exiqgrep-t
436 @mv exiqgrep-t exiqgrep
438 @./exiqgrep -v 2>&1 >/dev/null
439 @echo ">>> exiqgrep script built"
441 exiqsumm: config ../src/exiqsumm.src
443 @. ./version.sh && sed \
444 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
445 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
446 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
447 ../src/exiqsumm.src > exiqsumm-t
448 @mv exiqsumm-t exiqsumm
450 @./exiqsumm -v 2>&1 >/dev/null
451 @echo ">>> exiqsumm script built"
453 exipick: config ../src/exipick.src
455 @. ./version.sh && sed \
456 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
457 -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
458 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
459 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
460 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
461 ../src/exipick.src > exipick-t
462 @mv exipick-t exipick
464 @./exipick -v 2>&1 >/dev/null
465 @echo ">>> exipick script built"
467 exim_id_update: config ../src/exim_id_update.src
468 @rm -f exim_id_update
469 @. ./version.sh && sed \
470 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
471 -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
472 -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
473 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
474 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
475 ../src/exim_id_update.src > exim_id_update-t
476 @mv exim_id_update-t exim_id_update
477 @chmod a+x exim_id_update
478 @./exim_id_update -v 2>&1 >/dev/null
479 @echo ">>> exim_id_update script built"
481 transport-filter.pl: config ../src/transport-filter.src
482 @rm -f transport-filter.pl
483 @. ./version.sh && sed \
484 -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
485 -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
486 -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
487 ../src/transport-filter.src > transport-filter.pl-t
488 @mv transport-filter.pl-t transport-filter.pl
489 @chmod a+x transport-filter.pl
490 @echo ">>> transport-filter.pl script built"
493 # These are objects of optional features. They are always compiled, but
494 # if the corresponding #defines are not set, they wind up empty and
495 # are thrown away by the linker.
497 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
498 OBJ_EXPERIMENTAL = arc.o \
506 # Targets for final binaries; the main one has a build number which is
507 # updated each time. We don't bother with that for the auxiliaries.
509 OBJ_LOOKUPS = lf_quote.o lf_check_file.o lf_sqlperform.o
510 OBJ_ROUTERS = rf_change_domain.o rf_expand_data.o rf_get_errors_address.o \
511 rf_get_munge_headers.o rf_get_transport.o rf_get_ugid.o \
512 rf_lookup_hostlist.o rf_queue_add.o rf_self_action.o rf_set_ugid.o
513 OBJ_AUTHS = call_pam.o call_pwcheck.o call_radius.o check_serv_cond.o \
514 get_data.o get_no64_data.o pwcheck.o
516 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
517 directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
518 filtertest.o globals.o dkim.o dkim_transport.o dnsbl.o hash.o \
519 header.o host.o host_address.o ip.o log.o lss.o match.o md5.o moan.o \
520 os.o parse.o priv.o proxy.o queue.o \
521 rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o regex_cache.o \
522 route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
523 std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
524 xtextencode.o environment.o macro.o \
525 $(OBJ_LOOKUPS) $(OBJ_ROUTERS) $(OBJ_AUTHS) \
526 local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
529 exim: buildlookups buildauths pdkim/pdkim.a \
530 buildrouters buildtransports buildmisc \
531 $(OBJ_EXIM) version.o
532 @echo "$(LNCC) -o exim"
533 $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
534 routers/routers.a transports/transports.a lookups/lookups.a \
535 auths/auths.a pdkim/pdkim.a miscmods/miscmods.a \
536 $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
537 $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
538 $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
539 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
540 echo $(STRIP_COMMAND) exim; \
541 $(STRIP_COMMAND) exim; \
545 @echo ">>> exim binary built"
548 # The utility for dumping the contents of an exim database
550 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o util-xtextencode.o
552 exim_dumpdb: $(OBJ_DUMPDB)
553 @echo "$(LNCC) -o exim_dumpdb"
554 $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
555 $(LIBS) $(EXTRALIBS) $(DBMLIB)
556 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
557 echo $(STRIP_COMMAND) exim_dumpdb; \
558 $(STRIP_COMMAND) exim_dumpdb; \
560 @echo ">>> exim_dumpdb utility built"
563 # The utility for interrogating/fixing the contents of an exim database
565 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o util-md5.o util-xtextencode.o
567 exim_fixdb: $(OBJ_FIXDB)
568 @echo "$(LNCC) -o exim_fixdb"
569 $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
570 $(LIBS) $(EXTRALIBS) $(DBMLIB)
571 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
572 echo $(STRIP_COMMAND) exim_fixdb; \
573 $(STRIP_COMMAND) exim_fixdb; \
575 @echo ">>> exim_fixdb utility built"
578 # The utility for tidying the contents of an exim database
580 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o util-xtextencode.o
582 exim_tidydb: $(OBJ_TIDYDB)
583 @echo "$(LNCC) -o exim_tidydb"
584 $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) \
586 $(LIBS) $(EXTRALIBS) $(DBMLIB)
587 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
588 echo $(STRIP_COMMAND) exim_tidydb; \
589 $(STRIP_COMMAND) exim_tidydb; \
591 @echo ">>> exim_tidydb utility built"
594 # The utility for building dbm files
596 OBJ_DBMBUILD = exim_dbmbuild.o util-xtextencode.o
598 exim_dbmbuild: $(OBJ_DBMBUILD)
599 @echo "$(LNCC) -o exim_dbmbuild"
600 $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) \
602 $(LIBS) $(EXTRALIBS) $(DBMLIB)
603 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
604 echo $(STRIP_COMMAND) exim_dbmbuild; \
605 $(STRIP_COMMAND) exim_dbmbuild; \
607 @echo ">>> exim_dbmbuild utility built"
610 # The utility for locking a mailbox while messing around with it
612 exim_lock: exim_lock.c os.h
613 @echo "$(CC) exim_lock.c"
614 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
615 @echo "$(LNCC) -o exim_lock"
616 $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \
618 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
619 echo $(STRIP_COMMAND) exim_lock; \
620 $(STRIP_COMMAND) exim_lock; \
622 @echo ">>> exim_lock utility built"
625 # The X-based Exim monitor program's binary part. There's a macro for cutting
626 # out the modified TextPop module, because some antique link editors cannot
627 # handle the fact that it is redefining things that are found later in the
630 # Object modules that are the unique Eximon modules
632 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
633 em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
636 # The complete modules list also includes some specially compiled versions of
637 # code from the main Exim source tree.
639 OBJ_MONBIN = util-host_address.o \
649 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) ../exim_monitor/em_version.c \
650 mytypes.h store.h path_max.h macros.h
651 @echo "$(CC) exim_monitor/em_version.c"
652 $(FE)$(CC) -o em_version.o -c \
653 $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
654 @echo "$(LNCC) -o eximon.bin"
655 $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
656 $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
657 $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
658 @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
659 echo $(STRIP_COMMAND) eximon.bin; \
660 $(STRIP_COMMAND) eximon.bin; \
662 @echo ">>> exim monitor binary built"
666 # Compile step for most of the exim modules. HDRS is a list of headers
667 # which cause everything to be rebuilt. PHDRS is the same, for the use
668 # of routers, transports, and authenticators. I can't find a way of doing this
669 # in one. This list is overkill, but it doesn't really take much time to
670 # rebuild Exim on a modern computer.
681 hintsdb/hints_bdb.h \
682 hintsdb/hints_gdbm.h \
683 hintsdb/hints_ndbm.h \
684 hintsdb/hints_sqlite.h \
685 hintsdb/hints_tdb.h \
688 miscmods/dmarc_api.h \
695 PHDRS = ../config.h \
701 ../hintsdb_structs.h \
702 ../hintsdb/hints_bdb.h \
703 ../hintsdb/hints_gdbm.h \
704 ../hintsdb/hints_ndbm.h \
705 ../hintsdb/hints_sqlite.h \
706 ../hintsdb/hints_tdb.h \
709 ../miscmods/dmarc_api.h \
710 ../miscmods/spf_api.h \
717 .c.o:; @echo "$(CC) $*.c"
718 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
720 # Update Exim's version information and build the version object. The dependency
721 # chain here avoids problems under parallel-make.
724 @../scripts/reversion
726 version.h: version.sh
730 version.o: $(HDRS) cnumber.h version.h version.c
732 # This is the dummy module for use by test compiles of individual modules. It
733 # contains functions such as log_write() that may be called from bits of Exim
734 # in the tested code.
738 # Compile instructions for perl.o for when EXIM_PERL is set
740 perl.o: $(HDRS) perl.c
741 @echo "$(PERL_CC) perl.c"
742 $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
744 # Compile instructions for the database utility modules
746 exim_dumpdb.o: $(HDRS) exim_dbutil.c
747 @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
748 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
751 -o exim_dumpdb.o exim_dbutil.c
753 exim_fixdb.o: $(HDRS) exim_dbutil.c
754 @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
755 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
758 -o exim_fixdb.o exim_dbutil.c
760 exim_tidydb.o: $(HDRS) exim_dbutil.c
761 @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
762 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
765 -o exim_tidydb.o exim_dbutil.c
767 # Compile instructions for exim_dbmbuild
769 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
770 @echo "$(CC) exim_dbmbuild.c"
771 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
772 -o exim_dbmbuild.o exim_dbmbuild.c
774 # Utilities use special versions of some modules - typically with debugging
777 util-host_address.o: $(HDRS) host_address.c
778 @echo "$(CC) -DCOMPILE_UTILITY host_address.c"
779 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-host_address.o host_address.c
781 util-md5.o: $(HDRS) md5.c
782 @echo "$(CC) -DCOMPILE_UTILITY queue.c"
783 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-md5.o md5.c
785 util-spool_in.o: $(HDRS) spool_in.c
786 @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
787 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
789 util-store.o: $(HDRS) store.c
790 @echo "$(CC) -DCOMPILE_UTILITY store.c"
791 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
793 util-string.o: $(HDRS) string.c
794 @echo "$(CC) -DCOMPILE_UTILITY string.c"
795 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
797 util-queue.o: $(HDRS) queue.c
798 @echo "$(CC) -DCOMPILE_UTILITY queue.c"
799 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
801 util-tod.o: $(HDRS) tod.c
802 @echo "$(CC) -DCOMPILE_UTILITY tod.c"
803 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
805 util-tree.o: $(HDRS) tree.c
806 @echo "$(CC) -DCOMPILE_UTILITY tree.c"
807 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tree.o tree.c
809 util-xtextencode.o: $(HDRS) xtextencode.c
810 @echo "$(CC) -DCOMPILE_UTILITY xtextencode.c"
811 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-xtextencode.o xtextencode.c
813 util-os.o: $(HDRS) os.c
814 @echo "$(CC) -DCOMPILE_UTILITY os.c"
815 $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
818 -DFIND_RUNNING_INTERFACES \
821 # The local scan module depends only on its own special header, and is compiled
822 # from a source whose location is set by configuration.
824 local_scan.o: config local_scan.h ../$(LOCAL_SCAN_SOURCE)
825 @echo "$(CC) local_scan.c"
826 $(FE)$(CC) -DLOCAL_SCAN -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
828 # Dependencies for the "ordinary" exim modules
831 base64.o: $(HDRS) mime.h base64.c
832 child.o: $(HDRS) child.c
833 crypt16.o: $(HDRS) crypt16.c
834 daemon.o: $(HDRS) daemon.c
835 dbfn.o: $(HDRS) dbfn.c
836 debug.o: $(HDRS) debug.c
837 deliver.o: $(HDRS) transports/smtp.h deliver.c
838 directory.o: $(HDRS) directory.c
840 dnsbl.o: $(HDRS) dnsbl.c
842 exim.o: $(HDRS) exim.c
843 expand.o: $(HDRS) expand.c
844 environment.o: $(HDRS) environment.c
845 filter.o: $(HDRS) filter.c
846 filtertest.o: $(HDRS) filtertest.c
847 globals.o: $(HDRS) globals.c
848 hash.o: $(HDRS) hash.c
849 header.o: $(HDRS) header.c
850 host.o: $(HDRS) host.c
851 host_address.o: $(HDRS) host_address.c
855 match.o: $(HDRS) match.c
857 moan.o: $(HDRS) moan.c
858 os.o: $(HDRS) $(OS_C_INCLUDES) os.c
859 parse.o: $(HDRS) parse.c
860 priv.o: $(HDRS) priv.c
861 proxy.o: $(HDRS) proxy.c
862 queue.o: $(HDRS) queue.c
864 readconf.o: $(HDRS) readconf.c
865 receive.o: $(HDRS) receive.c
866 retry.o: $(HDRS) retry.c
867 rewrite.o: $(HDRS) rewrite.c
868 regex_cache.o: $(HDRS) regex_cache.c
869 rfc2047.o: $(HDRS) rfc2047.c
870 route.o: $(HDRS) route.c
871 search.o: $(HDRS) search.c
872 sieve.o: $(HDRS) sieve.c
873 smtp_in.o: $(HDRS) smtp_in.c
874 smtp_out.o: $(HDRS) smtp_out.c
875 spool_in.o: $(HDRS) spool_in.c
876 spool_out.o: $(HDRS) spool_out.c
877 std-crypto.o: $(HDRS) std-crypto.c
878 store.o: $(HDRS) store.c
879 string.o: $(HDRS) string.c
880 tls.o: $(HDRS) tls.c \
881 tls-gnu.c tlscert-gnu.c \
882 tls-openssl.c tlscert-openssl.c \
885 transport.o: $(HDRS) transport.c
886 tree.o: $(HDRS) tree.c
887 verify.o: $(HDRS) transports/smtp.h verify.c
888 xtextencode.o: $(HDRS) xtextencode.c
889 dkim.o: $(HDRS) pdkim/pdkim.h dkim.c
890 dkim_transport.o: $(HDRS) dkim_transport.c
892 # Dependencies for WITH_CONTENT_SCAN modules
894 malware.o: $(HDRS) malware.c
895 mime.o: $(HDRS) mime.h mime.c
896 regex.o: $(HDRS) regex.c
897 spam.o: $(HDRS) spam.c
898 spool_mbox.o: $(HDRS) spool_mbox.c
901 # Dependencies for EXPERIMENTAL_* modules
903 arc.o: $(HDRS) pdkim/pdkim.h arc.c
904 bmi_spam.o: $(HDRS) bmi_spam.c
905 dane.o: $(HDRS) dane.c dane-openssl.c
906 dcc.o: $(HDRS) dcc.h dcc.c
907 imap_utf7.o: $(HDRS) imap_utf7.c
908 utf8.o: $(HDRS) utf8.c
909 xclient.o: $(HDRS) xclient.c
911 # The module containing tables of available lookups, routers, auths, and
912 # transports must be rebuilt if any of them are. However, because the makefiles
913 # for the drivers are always run, we don't actually put the dependencies here,
914 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
915 # drtables.o even though the .a files haven't in fact been updated. Instead
916 # it is arranged that the lower-level makefiles remove drtables.o when they
917 # rebuild the .a files.
919 drtables.o: $(HDRS) drtables.c
921 # Some sources live in the lookups, routers or auths directory
923 $(OBJ_LOOKUPS) $(OBJ_ROUTERS) $(OBJ_AUTHS): $(HDRS)
925 $(OBJ_LOOKUPS): lookups/lf_functions.h
926 lf_check_file.o: lookups/lf_check_file.c
928 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
929 lf_quote.o: lookups/lf_quote.c
931 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
932 lf_sqlperform.o: lookups/lf_sqlperform.c
934 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
936 $(OBJ_ROUTERS): routers/rf_functions.h
937 rf_change_domain.o: routers/rf_change_domain.c
939 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
940 rf_expand_data.o: routers/rf_expand_data.c
942 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
943 rf_get_errors_address.o: routers/rf_get_errors_address.c
945 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
946 rf_get_munge_headers.o: routers/rf_get_munge_headers.c
948 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
949 rf_get_transport.o: routers/rf_get_transport.c
951 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
952 rf_get_ugid.o: routers/rf_get_ugid.c
954 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
955 rf_lookup_hostlist.o: routers/rf_lookup_hostlist.c
957 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
958 rf_queue_add.o: routers/rf_queue_add.c
960 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
961 rf_self_action.o: routers/rf_self_action.c
963 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
964 rf_set_ugid.o: routers/rf_set_ugid.c
966 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
968 auth-spa.o: auths/auth-spa.c
970 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
971 call_pam.o: auths/call_pam.c
973 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
974 call_pwcheck.o: auths/call_pwcheck.c auths/pwcheck.h
976 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
977 call_radius.o: auths/call_radius.c
979 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
980 check_serv_cond.o: auths/check_serv_cond.c
982 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
983 get_data.o: auths/get_data.c
985 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
986 get_no64_data.o: auths/get_no64_data.c
988 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
989 pwcheck.o: auths/pwcheck.c auths/pwcheck.h
991 $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
995 # The exim monitor's private modules - the sources live in a private
996 # subdirectory. The final binary combines the private modules with some
997 # modules from the main exim binary.
999 em_StripChart.o: ../exim_monitor/em_StripChart.c
1000 em_TextPop.o: ../exim_monitor/em_TextPop.c
1001 em_globals.o: ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
1002 em_init.o: ../exim_monitor/em_init.c ../exim_monitor/em_hdr.h
1003 em_log.o: ../exim_monitor/em_log.c ../exim_monitor/em_hdr.h
1004 em_main.o: ../exim_monitor/em_main.c ../exim_monitor/em_hdr.h
1005 em_menu.o: ../exim_monitor/em_menu.c ../exim_monitor/em_hdr.h
1006 em_queue.o: ../exim_monitor/em_queue.c ../exim_monitor/em_hdr.h
1007 em_strip.o: ../exim_monitor/em_strip.c ../exim_monitor/em_hdr.h
1008 em_text.o: ../exim_monitor/em_text.c ../exim_monitor/em_hdr.h
1009 em_xs.o: ../exim_monitor/em_xs.c ../exim_monitor/em_hdr.h
1010 em_version.o: ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
1012 @echo "$(CC) exim_monitor/$(@:.o=.c)"
1013 $(FE)$(CC) -o $@ -c $(CFLAGS) -DCOMPILE_UTILITY -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
1014 ../exim_monitor/$(@:.o=.c)
1017 # Targets for the various libraries that Exim uses.
1019 # Copies of modules built as dynamic-load libraries
1021 dynmodules: buildlookups buildrouters buildtransports buildauths \
1025 for d in lookup router transport auth miscmod; do \
1026 for f in $${d}s/*.so; do \
1027 [ -e $$f ] && ln $$f dynmodules/`basename $$f .so`_$$d.so; \
1032 # The lookups library.
1034 buildlookups: config
1035 @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1036 CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
1037 FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
1038 INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
1041 # The routers library.
1043 buildrouters: config
1044 @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1045 CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
1046 FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1047 INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1050 # The transports library.
1052 buildtransports: config
1053 @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1054 CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
1055 FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1056 INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1059 # The library of authorization modules
1062 @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1063 CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
1064 FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1065 INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1070 buildpdkim: pdkim/pdkim.a
1071 pdkim/pdkim.a: config
1072 @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1073 FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1074 INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1078 @cd miscmods && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) \
1079 CC="$(CC)" CFLAGS="$(CFLAGS)" \
1080 CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
1081 FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
1082 INCLUDE="$(INCLUDE) $(IPV6_INCLUDE)"
1085 # The "clean", "install", and "makefile" targets just pass themselves back to
1086 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
1087 # for them in the build directory.
1089 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
1091 # Targets for building stand-alone testing programs for basic testing of
1092 # some of the building blocks. These are not integrated with the makefile-
1093 # building targets. If you change something that is going to cause the
1094 # makefile to be rebuilt, you must run "make makefile" before running one
1097 # The testing programs use different versions of some modules - usually
1098 # with bits cut out that are not relevant to the test in hand. For those
1099 # that are used by several tests, we use a different name.
1101 sa-globals.o: $(HDRS) globals.c
1102 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
1104 sa-os.o: $(HDRS) os.c
1105 $(CC) -c $(CFLAGS) $(INCLUDE) \
1106 -DFIND_RUNNING_INTERFACES \
1109 # These are the test targets themselves
1111 test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
1112 string.o tod.o version.o utf8.o
1113 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
1114 $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
1115 $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
1116 dummies.o sa-globals.o sa-os.o store.o string.o \
1117 tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
1118 rm -f dbfn.o store.o
1120 test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
1121 host_address.o store.o string.o tod.o tree.o
1122 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
1123 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
1124 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
1125 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
1126 $(LNCC) -o test_host $(LFLAGS) \
1127 host.o host_address.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
1128 tod.o tree.o $(LIBS) $(LIBRESOLV)
1129 rm -f child.o dummies.o host.o dns.o
1131 test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
1132 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
1133 $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
1134 sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
1137 test_parse: config.h parse.c dummies.o sa-globals.o \
1138 store.o string.o tod.o version.o utf8.o
1139 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
1140 $(LNCC) -o test_parse $(LFLAGS) parse.o \
1141 dummies.o sa-globals.o store.o string.o tod.o version.o \
1145 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
1146 $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
1147 $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
1148 dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)