4 This file contains an almost complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.95.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_insecure_tainted_data boolean true main 4.95 support will drop ~4.97ٍ
82 allow_localhost boolean false smtp 1.73
83 allow_mx_to_ip boolean false main 3.14
84 allow_symlink boolean false appendfile
85 allow_utf8_domains boolean false main 4.14
86 arc_sign string* unset smtp 4.91 with Experimental_ARC
87 auth_advertise_hosts host list "*" main 4.00
88 authenticated_sender string* unset smtp 4.14
89 authenticated_sender_force boolean false smtp 4.61
90 authenticate_hosts host list unset smtp 3.13
91 auto_thaw time 0s main
92 av_scanner string* + main 4.50 with content scan
93 batch_id string unset appendfile 4.00
96 batch_max integer 100 appendfile
99 bcc string* unset autoreply
100 bi_command string unset main
101 body_only boolean false transports 2.05
102 bounce_message_file string* unset main 4.00 expanded from 4.94
103 bounce_message_text string unset main 4.00
104 bounce_return_body boolean true main 4.23
105 bounce_return_message boolean true main 4.00
106 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
107 bounce_sender_authentication string unset main 4.00
108 callout_domain_negative_expire time 3h main 4.11
109 callout_domain_positive_expire time 7d main 4.11
110 callout_negative_expire time 2h main 4.11
111 callout_positive_expire time 24h main 4.11
112 callout_random_local_part string* + main 4.11
113 cannot_route_message string* unset routers 4.11
114 caseful_local_part boolean false routers 4.00
115 cc string* unset autoreply
116 check_ancestor boolean false redirect 4.00
117 check_group boolean false appendfile
119 check_local_user boolean false routers 4.00
120 check_log_inodes integer 0 main
121 check_log_space integer 0 main
122 check_owner boolean true appendfile 3.14
124 check_rfc2047_length boolean true main 4.60
125 check_secondary_mx boolean false dnslookup 4.00
126 check_spool_inodes integer 0 main
127 check_spool_space integer 0 main
128 check_string string "From " appendfile 3.03
130 check_srv string* unset dnslookup 4.31
131 client_authz string* unset gsasl 4.94
132 client_condition string* unset authenticators 4.68
133 client_ignore_invalid_base64 boolean false plaintext 4.61
134 client_name string* + cram_md5 3.10
135 client_password string* unset gsasl 4.94
136 client_secret string* unset cram_md5 3.10
137 client_send string* unset plaintext 3.10
138 unset external (auth) 4.93
139 client_username string* unset gsasl 4.94
140 command string* unset lmtp 3.20
142 unset queryprogram 4.00
143 command_group string unset queryprogram 4.00
144 command_timeout time 5m smtp
145 command_user string unset queryprogram 4.00
146 commandline_checks_require_admin boolean false main 4.90
147 condition string* unset routers 4.00
148 connect_timeout time 0s smtp 1.60
149 connection_max_messages integer 500 smtp 4.00 replaces batch_max
150 create_directory boolean true appendfile
151 create_file string "anywhere" appendfile
152 current_directory string unset transports 4.00
153 unset queryprogram 4.00
154 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
155 daemon_startup_retries int 9 main 4.52
156 daemon_startup_sleep time 30s main 4.52
157 dane_require_tls_ciphers string* unset smtp 4.91
158 data string unset redirect 4.00
159 data_timeout time 5m smtp
160 debug_print string* unset authenticators 4.00
162 unset transports 2.00
163 debug_store boolean false main 4.90
164 delay_after_cutoff boolean true smtp
165 delay_warning time list 24h main
166 delay_warning_condition string* + main 1.73
167 deliver_drop_privilege boolean false main 4.00
168 deliver_queue_load_max fixed-point unset main 1.70
169 delivery_date_add boolean false transports
170 delivery_date_remove boolean true main
171 dkim_canon string* unset smtp 4.70
172 dkim_domain string list* unset smtp 4.72
173 dkim_private_key string* unset smtp 4.70
174 dkim_selector string* unset smtp 4.70
175 dkim_sign_headers string* (RFC4871) smtp 4.70
176 dkim_strict string* unset smtp 4.70
177 dkim_timestamps integer* unset smtp 4.92
178 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
179 dkim_verify_keytypes string ed25519:rsa main 4.93
180 dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
181 dkim_verify_minimal boolean false main 4.93
182 dkim_verify_signers string* $dkim_signers main 4.70
183 directory string* unset appendfile
184 directory_file string* + appendfile
185 directory_mode octal-integer 0700 appendfile
186 directory_transport string* unset redirect 4.00
187 disable_ipv6 boolean false main 4.61
188 disable_logging boolean false routers 4.11
189 false transports 4.11
190 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
191 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
192 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
193 dns_again_means_nonexist domain list unset main 1.89
194 dns_check_names_pattern string + main 2.11
195 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
196 dns_csa_search_limit integer 5 main 4.60
197 dns_csa_use_reverse boolean true main 4.60
198 dns_dnssec_ok integer -1 main 4.82
199 dns_dane_ok integer -1 main 4.83
200 dns_ipv4_lookup boolean false main 3.20
201 dns_qualify_single boolean true smtp
202 dns_retrans time 0s main 1.60
203 dns_retry integer 0 main 1.60
204 dns_search_parents boolean false smtp
205 dns_use_edns0 integer -1 main 4.76
206 domains domain list unset routers 4.00
207 driver string unset authenticators
210 drop_cr boolean false main 4.00 became a no-op in 4.21
211 dscp string unset smtp 4.82
212 dsn_from string* + main 4.67
213 envelope_to_add boolean false transports
214 envelope_to_remove boolean true main
215 environment string* unset pipe 2.95
216 errors_copy string list* unset main
217 errors_reply_to string unset main
218 errors_to string* unset routers 4.00
219 escape_string string ">From " appendfile 3.03
221 exim_group string ++ main
222 exim_path string ++ main
223 exim_user string ++ main
224 exim_version string ++ main 4.93
225 expn boolean true routers
226 extra_local_interfaces string unset main 4.21
227 extract_addresses_remove_arguments boolean true main 1.92
228 fail_verify boolean false routers
229 fail_verify_recipient boolean false routers 4.00
230 fail_verify_sender boolean false routers 4.00
231 fallback_hosts string list unset routers 4.00
233 file string* unset appendfile
236 file_expand boolean false autoreply
237 file_format string unset appendfile 3.03
238 file_must_exist boolean false appendfile
239 file_optional boolean false autoreply
240 file_transport string* unset redirect 4.00
241 filter_prepend_home boolean true redirect 4.63
242 final_timeout time 10m smtp
243 finduser_retries integer 0 main
244 forbid_blackhole boolean false redirect 4.00
245 forbid_exim_filter boolean false redirect 4.44
246 forbid_fail boolean false redirect 4.00
247 forbid_file boolean false redirect 4.00
248 forbid_filter_existstest boolean false redirect 4.00
249 forbid_filter_logwrite boolean false redirect 4.00
250 forbid_filter_lookup boolean false redirect 4.00
251 forbid_filter_perl boolean false redirect 4.00
252 forbid_filter_readfile boolean false redirect 4.00
253 forbid_filter_readsocket boolean false redirect 4.11
254 forbid_filter_reply boolean false redirect 4.00
255 forbid_filter_run boolean false redirect 4.00
256 forbid_include boolean false redirect 4.00
257 forbid_pipe boolean false redirect 4.00
258 forbid_sieve_filter boolean false redirect 4.44
259 forbid_smtp_code boolean false redirect 4.63
260 force_command boolean false pipe 4.82
261 freeze_exec_fail boolean false pipe 1.89
262 freeze_signal boolean false pipe 4.75
263 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
264 from string* unset autoreply
265 gecos_name string* unset main
266 gecos_pattern string unset main
267 gethostbyname boolean false smtp
268 gnutls_allow_auto_pkcs11 boolean false main 4.82
269 gnutls_compat_mode boolean unset main 4.70
270 gnutls_require_kx string* unset main 4.67 deprecated, warns
271 string* unset smtp 4.67 deprecated, warns
272 gnutls_require_mac string* unset main 4.67 deprecated, warns
273 string* unset smtp 4.67 deprecated, warns
274 gnutls_require_protocols string* unset main 4.67 deprecated, warns
275 string* unset smtp 4.67 deprecated, warns
276 group string + routers 4.00
277 unset transports 4.00 replaces local option in some transports
278 header_line_maxsize integer 0 (unset) main 4.14
279 header_maxsize integer 1M main 4.14
280 headers string* unset autoreply
281 headers_add string* unset routers 4.00
283 headers_charset string ++ main 4.21
284 headers_only boolean false transports 2.05
285 headers_remove string* unset routers 4.00
287 headers_rewrite string unset transports 3.20
288 helo_accept_junk_hosts host list unset main 3.00
289 helo_allow_chars string "" main 4.02
290 helo_lookup_domains domain list unset main 4.00
291 helo_data string* "$primary_hostname" smtp 3.21
292 helo_try_verify_hosts host list unset main 4.00
293 helo_verify_hosts host list unset main 1.73
294 hide_child_in_errmsg false redirect 4.00
295 hold_domains domain list unset main 1.70
296 home_directory string* unset transports 4.00 replaces individual options
297 host_all_ignored string "defer" manualroute 4.67
298 host_find_failed string "freeze" manualroute 4.00
299 host_name_extract string
300 "${if and {{match{.outlook.com\\$}{$host}} {match{$item}{\\N^250-([\\w.]+)\\s\\N}}} {$1}}"
302 host_lookup host list unset main 3.00
303 host_lookup_order string list "bydns:byaddr" main 4.30
304 host_reject_connection host list unset main 4.00
305 hosts string unset iplookup 4.00
306 string list* unset smtp
307 hosts_avoid_esmtp host list unset smtp 4.21
308 hosts_avoid_pipelining host list unset smtp 4.67
309 hosts_avoid_tls host list unset smtp 3.20
310 hosts_connection_nolog host list unset main 4.43
311 hosts_max_try integer 5 smtp 3.20
312 hosts_max_try_hardlimit integer 50 smtp 4.50
313 hosts_nopass_tls host list unset smtp 4.00
314 hosts_noproxy_tls host list "*" smtp 4.90
315 hosts_override boolean false smtp 2.11
316 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
317 hosts_randomize boolean false manualroute 4.00
319 hosts_require_auth host list unset smtp 4.00
320 hosts_require_alpn host list unset main 4.95
322 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
323 hosts_require_helo host list "*" main 4.95
324 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
325 hosts_require_tls host list unset smtp 3.20
326 hosts_treat_as_local domain list unset main 1.95
327 hosts_try_auth host list unset smtp 4.00
328 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
329 hosts_try_fastopen host list unset smtp 4.88
330 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
331 ibase_servers string unset main 4.23
332 ignore_bounce_errors_after time 0s main 4.00
333 ignore_eacces boolean false redirect 4.00
334 ignore_enotdir boolean false redirect 4.00
335 ignore_fromline_hosts host list unset main
336 ignore_fromline_local boolean false main 2.05
337 ignore_status boolean false pipe
338 ignore_target_hosts host list unset routers 4.00
339 include_directory string unset redirect 4.00
340 initgroups false routers 4.00
341 interface string list unset smtp 1.70
342 keep_malformed time 4d main
343 keepalive boolean true smtp 2.05
344 ldap_default_servers string list unset main 3.02
345 ldap_version int 2 or 3 main 4.14
346 local_from_check boolean true main 3.14
347 local_from_prefix string unset main 3.14
348 local_from_suffix string unset main 3.14
349 local_interfaces string list unset main 1.60
350 local_part_prefix string unset routers 4.00 replaces prefix
351 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
352 local_part_suffix string unset routers 4.00 replaces suffix
353 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
354 local_parts string list* unset routers 4.00
355 local_scan_timeout time 5m main 4.03
356 local_sender_retain boolean false main 4.00
357 localhost_number string unset main
358 lock_fcntl_timeout time 0s appendfile 3.14
359 lock_flock_timeout time 0s appendfile 4.11
360 lock_interval time 3s appendfile
361 lock_retries integer 10 appendfile
362 lockfile_mode octal-integer 0600 appendfile
363 lockfile_timeout time 30m appendfile
364 log string* unset autoreply
365 log_as_local boolean + routers 4.00
366 log_file_path string list ++ main
367 log_defer_output boolean false pipe 1.89
368 log_fail_output boolean false pipe 1.60
369 log_output boolean false pipe 1.60
370 log_selector string unset main 4.00
371 log_timezone boolean false main 4.11
372 lookup_open_max integer 25 main 2.05
373 mailbox_filecount string* unset appendfile 4.43
374 mailbox_size string* unset appendfile 4.43
375 maildir_format boolean false appendfile 1.70
376 maildir_retries integer 10 appendfile 1.70
377 maildir_tag string* unset appendfile 1.92
378 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
379 maildirfolder_create_regex string unset appendfile 4.62
380 mailstore_format boolean false appendfile 2.00
381 mailstore_prefix string* unset appendfile 2.00
382 mailstore_suffix string* unset appendfile 2.00
383 match_directory string* unset localuser
384 max_output integer 20K pipe
385 max_rcpt integer 100 smtp 1.60
386 max_user_name_length integer 0 main
387 mbx_format boolean false appendfile 2.10
388 message_body_newlines boolean false main 4.68
389 message_body_visible integer 500 main
390 message_id_header_domain string* unset main 4.11
391 message_id_header_text string* unset main
392 message_linelength_limit integer 998 smtp 4.94
393 message_logs boolean true main 4.10
394 message_prefix string* + appendfile 4.00 replaces prefix
395 string* unset pipe 4.00 replaces prefix
396 message_size_limit integer 50M main
398 message_suffix string* + appendfile 4.00 replaces suffix
399 string* unset pipe 4.00 replaces suffix
400 mode octal-integer 0600 appendfile
402 mode_fail_narrower boolean true appendfile 1.70
403 modemask octal-integer 022 redirect 4.00
404 more boolean true routers 4.00
405 move_frozen_messages boolean false main 3.09
406 multi_domain boolean true smtp
407 mx_domains domain list unset dnslookup 4.00
408 mx_fail_domains domain list unset dnslookup 4.43
409 mysql_servers string list unset main 3.03
410 never_users string list unset main
411 notifier_socket string "$spool_directory/exim_daemon_notify"
413 notify_comsat boolean false appendfile
414 once string* unset autoreply
415 once_file_size integer 0 autoreply 3.20
416 once_repeat time 0s autoreply 2.95
417 one_time boolean false redirect 4.00
418 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
419 optional boolean false iplookup 4.00
420 oracle_servers string unset main 4.00
421 owners string list unset redirect 4.00
422 owngroups string list unset redirect 4.00
423 panic_coredump boolean false main 4.96
424 pass_on_timeout boolean false routers 4.00
425 pass_router string unset routers 4.00
426 path string "/usr/bin" pipe
427 percent_hack_domains domain list unset main
428 perl_at_start boolean false main 2.10
429 perl_startup string unset main 2.10
430 permit_coredump boolean false pipe 4.73
431 pgsql_servers string list unset main 3.14
432 pid_file_path string ++ main
433 pipe_as_creator boolean false pipe
434 pipe_transport string* unset redirect 4.00
435 pipelining_advertise_hosts host list "*" main 4.14
436 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
437 port integer 0 iplookup 4.00
439 preserve_message_logs boolean false main
440 prdr_enable boolean false main 4.82 if experimental_prdr
441 primary_hostname string + main
442 print_topbitchars boolean false main 1.89
443 process_log_path string unset main 4.21
444 prod_requires_admin boolean true main 1.70
445 protocol string "udp" iplookup 4.00
446 string "smtp" smtp 3.20
447 public_name string unset authenticators 3.10
448 qualify_domain string + main
449 string* unset redirect 4.31
450 qualify_preserve_domain boolean false redirect 4.00
451 qualify_recipient string + main
452 qualify_single boolean true dnslookup 4.00
453 query string* + iplookup 4.00
454 queue_domains domain list unset main 4.00
455 queue_fast_ramp boolean false main 4.95
456 queue_list_requires_admin boolean true main 1.95
457 queue_only boolean false main
458 queue_only_file string unset main 2.05
459 queue_only_load fixed-point unset main
460 queue_only_load_latch boolean true main 4.68
461 queue_only_override boolean true main 4.21
462 queue_run_in_order boolean false main 1.70
463 queue_run_max integer 5 main
464 queue_smtp_domains domain list unset main
465 quota string* unset appendfile 1.60
466 quota_directory string* unset appendfile 4.11
467 quota_filecount integer 0 appendfile 2.05
468 quota_is_inclusive boolean true appendfile 3.20
469 quota_size_regex string unset appendfile 3.14
470 quota_warn_message string* + appendfile 2.10
471 quota_warn_threshold string* 0 appendfile 2.10
472 rcpt_include_affixes boolean false transports 4.21
473 receive_timeout time 0s main 4.00 replacing accept_timeout
474 received_header_text string* + main
475 received_headers_max integer 30 main
476 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
477 recipients_max integer 50000 main 1.60 default changed in 4.95 (was 0)
478 recipients_max_reject boolean false main 1.70
479 redirect_router string unset routers 4.00
480 remote_max_parallel integer 1 main
481 remote_sort_domains domain list unset main 4.00 replacing remote_sort
482 repeat_use boolean true redirect 4.00
483 reply_to string* unset autoreply 2.05
484 reply_transport string* unset redirect 4.00
485 require_files string list* unset routers 4.00
486 reroute string* unset iplookup 4.00
487 response_pattern string unset iplookup 4.00
488 restrict_to_path boolean false pipe
489 retry_data_expire time 7d main 3.03
490 retry_include_ip_address boolean true smtp 1.92
491 retry_interval_max time 24h main
492 retry_use_local_part boolean + routers 4.00
493 + transports 4.00 replacing individual options
494 return_fail_output boolean false pipe 1.60
495 return_message boolean false autoreply
496 return_output boolean false pipe
497 return_path string* unset transports 2.05
498 return_path_add boolean false transports
499 return_path_remove boolean true main
500 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
501 rewrite boolean true redirect 4.00
502 rewrite_headers boolean true dnslookup 4.00
503 rfc1413_hosts host list * main
504 rfc1413_query_timeout time 5s main
505 router_home_directory string* unset routers 4.11
506 route_data string* unset manualroute 4.00
507 route_list string list unset manualroute 4.00
508 same_domain_copy_routing boolean false dnslookup 4.00
509 search_parents boolean false dnslookup 4.00
510 self string "freeze" routers 4.00
511 sender_unqualified_hosts host list unset main
512 senders address list unset routers 4.00
513 serialize_hosts host list unset smtp 1.60
514 server_advertise_condition string* unset authenticators 4.14
515 server_channelbinding bool false gsasl 4.80
516 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
517 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
518 server_keytab string* unset heimdal_gssapi 4.80
519 server_mail_auth_condition string* unset authenticators 3.22
520 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
521 server_password string unset gsasl 4.80
522 server_param1 string* unset tls (auth) 4.86
523 server_param2 string* unset tls (auth) 4.86
524 server_param3 string* unset tls (auth) 4.86
525 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
526 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
527 server_prompts string* unset plaintext 3.10
528 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
529 server_scram_iter string* unset gsasl 4.80
530 server_scram_salt string* unset gsasl 4.80
531 server_secret string* unset cram_md5 3.10
532 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
533 server_set_id string* unset authenticators 3.10
534 set string* unset routers 4.93
535 shadow_condition string* unset transports
536 shadow_transport string unset transports
537 size_addition integer 1024 smtp 1.91
538 skip_syntax_errors boolean false redirect 4.00
539 smtp_accept_keepalive boolean true main
540 smtp_accept_max integer 20 main
541 smtp_accept_max_nonmail integer 10 main 4.11
542 smtp_accept_max_nonmail_hosts host list * main 4.14
543 smtp_accept_max_per_connection integer 1000 main 4.00
544 smtp_accept_max_per_host integer 0 main 2.05
545 smtp_accept_queue integer 0 main
546 smtp_accept_queue_per_connection integer 10 main 2.03
547 smtp_accept_reserve integer 0 main
548 smtp_active_hostname string* unset main 4.33
549 smtp_backlog_monitor integer 0 main 4.95
550 smtp_banner string* + main
551 smtp_check_spool_space boolean true main 2.10
552 smtp_connect_backlog integer 5 main
553 smtp_enforce_sync boolean true main 4.00
554 smtp_etrn_command string* unset main 1.92
555 smtp_etrn_serialize boolean true main 1.89
556 smtp_load_reserve fixed-point unset main
557 smtp_max_synprot_errors integer 3 main 4.30
558 smtp_max_unknown_commands integer 3 main 4.14
559 smtp_ratelimit_hosts host list unset main 4.00
560 smtp_ratelimit_mail string unset main 4.00
561 smtp_ratelimit_rcpt string unset main 4.00
562 smtp_receive_timeout time 5m main
563 smtp_reserve_hosts host list unset main
564 smtp_return_error_details boolean false main 4.11
565 socket string* unset lmtp 4.11
566 spamd_address string* + main 4.50 with content scan
567 spf_guess string "v=spf1 a/24 mx/24 ptr ?all"
568 main 4.91 with SUPPORT_SPF
569 spf_smtp_comment_template string* "Please see http://www.open-spf.org/Why"
570 main 4.94 with SUPPORT_SPF
571 split_spool_directory boolean false main 1.70
572 spool_directory string ++ main
573 spool_wireformat boolean false main 4.90
574 sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
575 sqlite_lock_timeout time 5s main 4.53
576 strict_acl_vars boolean false main 4.64
577 srv_fail_domains domain list unset dnslookup 4.43
578 strip_excess_angle_brackets boolean false main
579 strip_trailing_dot boolean false main
580 subject string* unset autoreply
581 syntax_errors_text string* unset redirect 4.00
582 syntax_errors_to string unset redirect 4.00
583 syslog_duplication boolean true main 4.21
584 syslog_facility string unset main 4.20
585 syslog_processname string "exim" main 4.20
586 syslog_timestamp boolean true main 4.00
587 system_filter string unset main 4.00 replacing message_filter
588 system_filter_directory_transport string unset main 4.00 replacing message_filter
589 system_filter_file_transport string unset main 4.00 replacing message_filter
590 system_filter_group string unset main 4.00 replacing message_filter
591 system_filter_pipe_transport string unset main 4.00 replacing message_filter
592 system_filter_reply_transport string unset main 4.00 replacing message_filter
593 system_filter_user string unset main 4.00 replacing message_filter
594 tcp_nodelay boolean true main 4.23
596 tcp_wrappers_daemon_name string* ++ main 4.73
597 temp_errors string list + pipe 1.95
598 text string* unset autoreply
599 timeout time 5m lmtp 3.20
603 timeout_defer boolean false pipe 4.51
604 timeout_frozen_after time 0s main 3.20
605 timezone string + main 3.15
606 tls_advertise_hosts host list * main 3.20
607 tls_alpn string* unset main 4.95
609 tls_certificate string* unset main 3.20
611 tls_dh_max_bits integer 2236 main 4.80
612 tls_dh_min_bits integer 1024 smtp 4.82
613 tls_dhparam string* unset main 3.20
614 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
615 tls_on_connect_ports string unset main 4.43
616 tls_privatekey string* unset main 3.20
618 tls_remember_emstp boolean false main 4.21
619 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
620 string* unset main 4.33
621 tls_resumption_hosts host list* unset main 4.95
622 host list* unset smtp 4.95
623 tls_sni string* unset main 4.80
624 tls_tempfail_tryclear boolean true smtp 4.05
625 tls_try_verify_hosts host list unset main 4.00
626 tls_verify_certificates string* unset main 3.20
628 tls_verify_hosts host list unset main 3.20
629 to string* unset autoreply
630 translate_ip_address string unset routers 4.00
631 transport string* unset routers 4.00
632 transport_current_directory string unset routers 4.00
633 transport_home_directory string unset routers 4.00
634 transport_filter string unset transports
635 transport_filter_timeout time 5m transports 4.30
636 trusted_groups string list unset main
637 trusted_users string list unset main
638 umask octal-integer 022 pipe
639 unknown_login string unset main
640 unknown_username string unset main
641 unseen boolean false routers 4.00
642 untrusted_set_sender boolean false main 3.20
643 use_bsmtp boolean false appendfile 4.00
645 use_crlf boolean false appendfile 1.89
647 use_fcntl_lock boolean + appendfile 1.70
648 use_flock_lock boolean + appendfile 4.11
649 use_lockfile boolean + appendfile
650 use_mbx_lock boolean + appendfile 2.10
651 use_shell boolean false pipe 1.70
652 user string + routers 4.00
653 unset transports 4.00 replaces individual options
654 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
655 uucp_from_pattern string + main 1.75
656 uucp_from_sender string* "$1" main 1.75
657 verify boolean true routers 4.00
658 verify_only boolean false routers 4.00
659 verify_recipient boolean true routers 4.00
660 verify_sender boolean true routers 4.00
661 warn_message_file string* unset main 4.00 expanded from 4.94
662 widen_domains string list unset dnslookup 4.00
663 write_rejectlog boolean true main 4.31
667 2. COMMAND LINE OPTIONS
668 -----------------------
670 The table below contains a complete list of all Exim's command line options.
671 Those marked with # are available only to trusted users, those marked with +
672 are available only to admin users, and those marked with * exist only to
673 provide compatibility with Sendmail.
676 --help Give a little help (not a lot)
677 --version Give version information (alias for -bV)
680 -bdf + Start daemon and run it in the foreground
681 -be Test string expansion
682 -bem Test string expansion, read test message first
683 -bF Test system filter file
684 -bf Test user filter file
685 -bfd Set domain for filter testing
686 -bfl Set local part for filter testing
687 -bfp Set local part prefix for filter testing
688 -bfs Set local part suffix for filter testing
689 -bh Test incoming SMTP call, omitting callouts
690 -bhc Test incoming SMTP call, with callouts
691 -bi * Run <command>bi_command</command>
692 -bI:help Show list of accepted -bI:<tag> options
693 -bm Accept message on standard input
694 -bmalware + Invoke configured malware scanning against supplied filename
695 -bnq Don't qualify addresses in locally submitted messages
696 -bP Show configuration option settings
698 -bpa + ... with generated addresses as well
699 -bpc + ... but just show a count of messages
700 -bpr + ... do not sort
701 -bpra + ... with generated addresses, unsorted
702 -bpru + ... only undelivered addresses, unsorted
703 -bpu + ... only undelivered addresses
704 -brt Test retry rules
705 -brw Test rewriting rules
706 -bS Read batch SMTP on standard input
707 -bs Run SMTP on standard input and output
708 -bt Test address directing and routing
709 -bV Verify version number
710 -bv Test recipient address verification
711 -bvs Test sender address verification
712 -bw + Inetd wait mode
713 -C + Use alternate configuration file
714 -D + Define macro for configuration file
715 -d + Turn on debugging output
716 -dd + Ditto, but if a daemon, not for subprocesses
717 -dropcr Remove CR character in input: became a no-op in 4.21
719 -ex * Synonym for -oex (for several different x)
720 -F Set calling user name
721 -f # Set calling user address
724 -i Dot does not terminate message
725 -M + Force deliver specific message
726 -Mar + Add recipient to message
727 -MC Internal use only
728 -MCA Internal use only
729 -MCP Internal use only
730 -MCQ Internal use only
731 -MCS Internal use only
732 -MCT Internal use only
733 -Mc + Deliver specific message
734 -Mes + Edit message sender
735 -Mf + Freeze message(s)
736 -Mg + Give up (bounce) message(s)
737 -Mmad + Mark all recipients delivered
738 -Mmd + Mark one recipient delivered
739 -Mrm + Remove message(s) (no bounce)
740 -Mset + Load message's variables when testing with -be
741 -Mt + Thaw message(s)
742 -Mvb + View message body
743 -Mvc + View entire message in RFC 2822 format
744 -Mvh + View message header
745 -Mvl + View message log
747 -N + Deliver without transporting
750 -oA * Supply argument for <option>-bi</option>
751 -oB Set max messages down one connection
752 -odb Background delivery
753 -odf Foreground delivery
754 -odi Foreground delivery
755 -odq Queue message; do not deliver
756 -odqs ... do not do SMTP deliveries
757 -oee Error sent by mail; zero return code
758 -oem Error sent by mail; non-zero return code
759 -oep Error written to standard error stream
760 -oeq * Error written to standard error stream
761 -oew * Error sent by mail; non-zero return code
762 -oi Dot does not terminate message
763 -oitrue * Dot does not terminate message
764 -oMa # Supply host address
765 -oMaa # Supply authenticator name
766 -oMai # Supply authenticated id
767 -oMas # Supply authenticated sender
768 -oMi # Supply interface address
769 -oMm # Supply message reference
770 -oMr # Supply protocol name
771 -oMs # Supply host name
772 -oMt # Supply ident string
775 -oP * Specify path for daemon's pid file
776 -or Timeout non-SMTP messages
777 -os Timeout for SMTP messages
778 -ov * Verbose; same as -v
779 -oX Alternative port for daemon
780 -pd Delay Perl interpreter start
781 -ps Do not delay Perl interpreter start
782 -p<r>:<s> * Same as -oMr <r> -oMs <s>
784 -qf + ... force delivery ) Other combinations are
785 -qff + ... and include frozen messages ) possible. The syntax is
786 -qi + ... initial deliveries only )
787 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
788 -qq + Two-stage queue run )
791 -R Select by recipient in queue run
793 -Rff ... and frozen messages
794 -Rr ... using regular expression
795 -Rrf ... with forcing
796 -Rrff ... and frozen messages
798 -S Select by sender in queue run
800 -Sff ... and frozen messages
801 -Sr ... using regular expression
802 -Srf ... with forcing
803 -Srff ... and frozen messages
804 -Tqt * Used by Exim test suite; not recognized in normal use
805 -t Take recipients from header lines
807 -tls-on-connect Do TLS on startup (for legacy clients)
809 -v Verbose - shows SMTP dialogue and other delivery info
810 -x Ignored (AIX compatibility)
813 3. BUILD TIME OPTIONS FOR EXIM
814 ------------------------------
816 The table below contains a "mostly" complete list of options that can be
817 set in Local/Makefile when building Exim. The only items not included are
818 those whose names can be trivially derived from rules stated below.
820 More information about individual options can be found in src/EDITME and
823 The second column below gives the type of option:
825 . `system' means the option is concerned with the operating system;
827 . `driver' means the option selects a driver to be included in the binary;
829 . `lookup' means the option selects a lookuptype to be included in the binary;
831 . `mandatory' means the option is required to be supplied;
833 . `recommended' means the option is recommended to be supplied;
835 . `optional' means what it says;
837 Those marked with * are specialized and are unlikely to be required in most
838 installations. Those that are marked with ** are commonly set in OS-specific
839 Makefiles. If you use any of these in your Local/Makefile, you may need to
840 reproduce some of the OS-specific settings. For example, in the Makefile for
841 Solaris (which is actually called OS/Makefile-SunOS5), there is
843 LIBS=-lsocket -lnsl -lkstat
845 If you use LIBS to add extra libraries, you must also include the OS ones in
846 your setting. It is better, in this particular case, to use EXTRALIBS, which is
847 empty by default, and is provided for just this reason. Of course, if you do
848 actually want to modify a setting from the OS-specific file, there is nothing
849 to stop you overriding it in your Local/Makefile.
851 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
852 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
853 libraries specific only to that module. These rules are only used where the
854 relevant lookup is a module. These options are not explicitly listed below.
856 Variables with names endined `_PC' are used for pkg-config integration; setting
857 the value to the name of a pkg-config package will cause Exim's build system to
858 query the --cflags and --libs for the given name, when building anything
859 dependent upon the component associated with the `_PC' variable. For lookups,
860 if the lookup is dynamically loaded, then this *replaces* the use of the
861 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
862 is statically loaded into Exim, the results will be inserted into the
863 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
864 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
865 only listed below for the TLS implementation cases.
868 Option Type Description
869 ------------------------------------------------------------------------------
871 ALT_CONFIG_PREFIX optional restricts location of -C files
872 APPENDFILE_MODE optional*
873 APPENDFILE_DIRECTORY_MODE optional*
874 APPENDFILE_LOCKFILE_MODE optional*
875 AR system command to build a library
876 AUTH_CRAM_MD5 driver include cram_md5 authenticator
877 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
878 AUTH_GSASL driver include GNU SASL authenticator
879 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
880 AUTH_LIBS system library linkage for authenticators
881 AUTH_PLAINTEXT driver include plaintext authenticator
882 AUTH_SPA driver include SPA (NTLM) authenticator
883 AUTH_VARS=3 optional* number of $auth variables
884 BASENAME_COMMAND system** path to basename
885 BASE_62=62 optional* not normally changed for Unix
886 BIN_DIRECTORY mandatory Exim binary directory
887 CC system** C compiler
888 CFLAGS system** flags for C compiler
889 CFLAGS_DYNAMIC system** extra flags needed for .so modules
890 CHGRP_COMMAND system** path to chgrp
891 CHOWN_COMMAND system** path to chown
892 COMPRESS_COMMAND system path to a compress command
893 COMPRESS_SUFFIX system suffix added to compressed files
894 CONFIGURE_FILE mandatory Exim runtime configuration file
895 CONFIGURE_FILE_USE_EUID optional*
896 CONFIGURE_FILE_USE_NODE optional*
897 CONFIGURE_GROUP optional* alternate group for configuration file
898 CONFIGURE_OWNER optional* alternate owner for configuration file
899 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
900 DBMLIB optional** location of DBM library
901 DB_DIRECTORY_MODE optional* mode for hints directory
902 DB_LOCKFILE_MODE optional* mode for hints lock files
903 DB_LOCK_TIMEOUT optional* timeout for hints lock files
904 DB_MODE optional* mode for hints files
905 DEFAULT_CRYPT optional default crypt() function
906 DELIVER_IN_BUFFER_SIZE optional*
907 DELIVER_OUT_BUFFER_SIZE optional*
908 DISABLE_DKIM optional disables DKIM support
909 DISABLE_DNSSEC optional disables attempts to use DNSSEC
910 DISABLE_D_OPTION optional disables -D option
911 ERRNO_QUOTA optional* error code for system quota failures
912 EXICYCLOG_MAX optional number of old log files to keep
913 EXIMDB_DIRECTORY_MODE optional* for hints database directory
914 EXIMDB_LOCKFILE_MODE optional* for hints lock files
915 EXIMDB_MODE optional* mode for hints files
916 EXIMON_TEXTPOP system**
918 EXIM_GROUP mandatory group to use for Exim
919 EXIM_MONITOR optional set to eximon.bin to compile
921 EXIM_USER mandatory user to use for Exim
922 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
923 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
924 EXIWHAT_MULTIKILL_CMD system**
925 EXIWHAT_MULTIKILL_ARG system**
926 EXIWHAT_PS_ARG system** to list all processes
927 EXIWHAT_PS_CMD system** path to ps command
928 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
929 EXTRALIBS system additional libraries
930 EXTRALIBS_EXIM system additional libraries for Exim only
931 EXTRALIBS_EXIMON system additional libraries for the monitor
932 FIXED_NEVER_USERS optional can't override at runtime
933 HAVE_ICONV system the iconv() function is available
934 HAVE_IPV6 system include IPv6 support
935 HEADERS_CHARSET optional charset for decoded header lines
936 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
937 HEADER_MAXSIZE optional* max memory for message header
938 HOSTNAME_COMMAND system** path to hostname command
939 INCLUDE system path to include files
940 INFO_DIRECTORY optional directory for Info documentation
941 INPUT_DIRECTORY_MODE optional mode for input directory
942 IPV6_INCLUDE system additional includes for IPv6
943 IPV6_LIBS system additional libraries for IPv6
944 LDAP_LIB_TYPE optional type of LDAP library
945 LFLAGS system** link editor flags
946 LIBIDENTCFLAGS system C flags when compiling libident
947 LIBIDENTNAME system name for libident library
948 LIBRESOLV system** library for DNS resolver
949 LIBS system** additional libraries
950 LIBS_EXIM system** additional libraries for Exim ony
951 LIBS_EXIMON system** additional libraries for monitor
952 LOCAL_SCAN_SOURCE optional location of local_scan() source
953 LOG_DIRECTORY_MODE optional mode for log directory
954 LOG_FILE_PATH optional path to log files
955 LOG_MODE optional mode for log files
956 LOOKUP_CDB lookup include cdb lookup
957 LOOKUP_DBM lookup include dbm lookup
958 LOOKUP_DNSDB lookup include dnsdb lookup
959 LOOKUP_DSEARCH lookup include dsearch lookup
960 LOOKUP_INCLUDE lookup include files for lookups
961 LOOKUP_LDAP lookup include ldap lookup
962 LOOKUP_LIBS lookup include libraries for lookups
963 LOOKUP_LSEARCH lookup include all lsearch lookups
964 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
965 LOOKUP_MYSQL lookup include mysql lookup
966 LOOKUP_NIS lookup include nis lookup
967 LOOKUP_NISPLUS lookup include nisplus lookup
968 LOOKUP_ORACLE lookup include oracle lookup
969 LOOKUP_PGSQL lookup include pgsql lookup
970 LOOKUP_TESTDB lookup*
971 LOOKUP_WHOSON lookup include whoson lookup
972 LOOKUP_*_INCLUDE optional* include files for dynamic module
973 LOOKUP_*_LIBS optional* libraries for dynamic module
974 MAKE_SHELL optional* shell to use for make
975 MAX_FILTER_SIZE optional* max file size for filter files
976 MAX_INCLUDE_SIZE optional* max file size for :include: files
977 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
978 MAX_NAMED_LIST optional* max named lists of a given type
979 MAX_INTERFACES system maximum network interfaces
980 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
981 MV_COMMAND system path to mv command
982 NO_SYMLINK optional install doesn't make 'exim" symlink
983 PCRE_CONFIG system* use pcre-config for PCRE support
984 PCRE_LIBS system* library for using PCRE
985 PERL_CC system* compiler for Perl interface code
986 PERL_CCOPTS system* flags for same
987 PERL_COMMAND system path to Perl
988 PERL_LIBS system* library for compiling Perl interface
989 PID_FILE_PATH optional path to daemon's pid file
990 RADIUS_CONFIG_FILE optional path to Radius config file
991 RADIUS_LIB_TYPE optional type of RADIUS library
992 RANLIB system** path to ranlib command
993 RM_COMMAND system path to rm command
994 ROUTER_ACCEPT driver include accept router
995 ROUTER_DNSLOOKUP driver include dnslookup router
996 ROUTER_MANUALROUTE driver include manualroute router
997 ROUTER_IPLITERAL driver include ipliteral router
998 ROUTER_IPLOOKUP driver include iplookup router
999 ROUTER_REDIRECT driver include redirect router
1000 ROUTER_QUERYPROGRAM driver include queryprogram router
1001 SPOOL_DIRECTORY recommended path to spool directory
1002 SPOOL_DIRECTORY_MODE optional mode of spool directory
1003 SPOOL_MODE optional mode of spool files
1004 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
1005 STRIP_COMMAND optional* can be used to strp binaries
1006 SUPPORT_A6 optional* support A6 DNS records
1007 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
1008 SUPPORT_MAILDIR optional support for maildir delivery
1009 SUPPORT_MAILSTORE optional support for mailstore delivery
1010 SUPPORT_MBX optional support for MBX delivery
1011 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
1012 SUPPORT_PAM optional support for PAM authentication
1013 SUPPORT_TLS optional support for TLS encryption over SMTP
1014 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
1015 SYSLOG_LOG_PID optional add pid to syslog lines
1016 SYSLOG_LONG_LINES optional do not split long syslog lines
1017 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
1018 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
1019 TIMEZONE_DEFAULT optional default for timezone option
1020 TLS_INCLUDE optional path to include files for TLS
1021 TLS_LIBS optional additional libraries for TLS
1022 EXIM_TMPDIR system value for TMPDIR environment variable
1023 TRANSPORT_APPENDFILE driver include appendfile transport
1024 TRANSPORT_AUTOREPLY driver include autoreply transport
1025 TRANSPORT_LMTP driver include lmtp transport
1026 TRANSPORT_PIPE driver include pipe transport
1027 TRANSPORT_SMTP driver include smtp transport
1028 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1029 USE_DB system** use native DB interface
1030 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1031 USE_GNUTLS_PC optional probably "gnutls"
1032 USE_OPENSSL_PC optional probably "openssl"
1033 USE_READLINE optional try to load libreadline for -be
1034 USE_TCP_WRAPPERS system link with tcpwrappers
1035 USE_TDB optional use the tdb DB interface
1036 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1037 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1038 X11 system** X11 base directory
1039 X11_LD_LIB system** X11 link library
1040 XINCLUDE system** X11 include directory
1041 XLFLAGS system** X11 link time flags
1042 ZCAT_COMMAND system path to zcat command
1045 4. BUILD TIME OPTIONS FOR EXIMON
1046 --------------------------------
1048 The table below contains a complete list of options that can be set in
1049 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1050 ** it means that the text string is too long to fit in the table and is instead
1051 given below. A blank default means that there is no default value.
1053 ACTION_OUTPUT=no show output for every action
1054 ACTION_QUEUE_UPDATE=yes update queue display after actions
1055 BODY_MAX=20000 maximum body display
1056 DOMAIN= domain to strip from window title
1057 LOG_BUFFER=20K buffer for log tail
1058 LOG_DEPTH=300 depth of log subwindow
1059 LOG_FONT=** font for log display
1060 LOG_STRIPCHARTS=** patterns for stripcharts
1061 LOG_WIDTH=950 width of log subwindow
1062 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1063 MIN_HEIGHT=162 minimum window height
1064 MIN_WIDTH=103 minimum window width
1065 QUALIFY_DOMAIN= local domain to strip from addresses
1066 QUEUE_DEPTH=200 depth of queue subwindow
1067 QUEUE_FONT=$LOG_FONT font for queue display
1068 QUEUE_INTERVAL=300 queue refresh interval
1069 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1070 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1071 QUEUE_WIDTH=950 width of queue subwindow
1072 SIZE_STRIPCHART= request partition size stripchart
1073 SIZE_STRIPCHART_NAME=space name for size stripchart
1074 START_SMALL=no if yes, start with small window
1075 STRIPCHART_INTERVAL=60 stripchart refresh interval
1076 TEXT_DEPTH=200 depth of text windows
1077 WINDOW_TITLE="${hostname} eximon" window title
1079 The default for LOG_FONT is
1081 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1083 and the default for LOG_STRIPCHARTS is
1085 LOG_STRIPCHARTS='/ <= /in/
1087 / => .+ R=local/local/
1088 / => .+ T=[^ ]*smtp/smtp/'
1090 That is, there are four stripcharts, named in, out, local, and smtp. The first
1091 counts message arrivals, the second counts all deliveries, the third counts
1092 deliveries where the router's name starts with "local", and the fourth counts
1093 deliveries where the transport name contains "smtp".
1095 **** End of OptionLists ****
git://git.exim.org / exim.git / blob