4 This file contains descriptions of new features that have been added to Exim.
5 Before a formal release, there may be quite a lot of detail so that people can
6 test from the snapshots or the CVS before the documentation is updated. Once
7 the documentation is updated, this file is reduced to a short list.
12 1. The new perl_taintmode option allows to run the embedded perl
13 interpreter in taint mode.
15 2. New log_selector: dnssec, adds a "DS" tag to acceptance and delivery lines.
17 3. Speculative debugging, via a "kill" option to the "control=debug" ACL
20 4. New expansion item ${sha3:<string>} / ${sha3_<N>:<string>}.
21 N can be 224, 256 (default), 384, 512.
22 With GnuTLS 3.5.0 or later, only.
24 5. Facility for named queues: A commandline argument can specify
25 the queue name for a queue operation, and an ACL modifier can set
26 the queue to be used for a message. A $queue_name variable gives
29 6. New expansion operators base32/base32d.
31 7. The CHUNKING ESMTP extension from RFC 3030. May give some slight
32 performance increase and network load decrease. Main config option
33 chunking_advertise_hosts, and smtp transport option hosts_try_chunking
36 8. LMDB lookup support, as Experimental. Patch supplied by Andrew Colin Kissa.
38 9. Expansion operator escape8bit, like escape but not touching newline etc..
40 10. Feature macros, generated from compile options. All start with "_HAVE_"
41 and go on with some roughly recognisable name. Driver macros, for
42 router, transport and authentication drivers; names starting with "_DRVR_".
43 Option macros, for each configuration-file option; all start with "_OPT_".
44 Use the "-bP macros" command-line option to see what is present.
46 11. Integer values for options can take a "G" multiplier.
48 12. defer=pass option for the ACL control cutthrough_delivery, to reflect 4xx
49 returns from the target back to the initiator, rather than spooling the
52 13. New built-in constants available for tls_dhparam and default changed.
54 14. If built with EXPERIMENTAL_QUEUEFILE, a queuefile transport, for writing
55 out copies of the message spool files for use by 3rd-party scanners.
61 1. The ACL conditions regex and mime_regex now capture substrings
62 into numeric variables $regex1 to 9, like the "match" expansion condition.
64 2. New $callout_address variable records the address used for a spam=,
65 malware= or verify= callout.
67 3. Transports now take a "max_parallel" option, to limit concurrency.
69 4. Expansion operators ${ipv6norm:<string>} and ${ipv6denorm:<string>}.
70 The latter expands to a 8-element colon-sep set of hex digits including
71 leading zeroes. A trailing ipv4-style dotted-decimal set is converted
72 to hex. Pure ipv4 addresses are converted to IPv4-mapped IPv6.
73 The former operator strips leading zeroes and collapses the longest
74 set of 0-groups to a double-colon.
76 5. New "-bP config" support, to dump the effective configuration.
78 6. New $dkim_key_length variable.
80 7. New base64d and base64 expansion items (the existing str2b64 being a
81 synonym of the latter). Add support in base64 for certificates.
83 8. New main configuration option "bounce_return_linesize_limit" to
84 avoid oversize bodies in bounces. The dafault value matches RFC
87 9. New $initial_cwd expansion variable.
93 1. Support for using the system standard CA bundle.
95 2. New expansion items $config_file, $config_dir, containing the file
96 and directory name of the main configuration file. Also $exim_version.
98 3. New "malware=" support for Avast.
100 4. New "spam=" variant option for Rspamd.
102 5. Assorted options on malware= and spam= scanners.
104 6. A commandline option to write a comment into the logfile.
106 7. If built with EXPERIMENTAL_SOCKS feature enabled, the smtp transport can
107 be configured to make connections via socks5 proxies.
109 8. If built with EXPERIMENTAL_INTERNATIONAL, support is included for
110 the transmission of UTF-8 envelope addresses.
112 9. If built with EXPERIMENTAL_INTERNATIONAL, an expansion item for a commonly
113 used encoding of Maildir folder names.
115 10. A logging option for slow DNS lookups.
117 11. New ${env {<variable>}} expansion.
119 12. A non-SMTP authenticator using information from TLS client certificates.
121 13. Main option "tls_eccurve" for selecting an Elliptic Curve for TLS.
122 Patch originally by Wolfgang Breyha.
124 14. Main option "dns_trust_aa" for trusting your local nameserver at the
125 same level as DNSSEC.
131 1. If built with EXPERIMENTAL_DANE feature enabled, Exim will follow the
132 DANE smtp draft to assess a secure chain of trust of the certificate
133 used to establish the TLS connection based on a TLSA record in the
134 domain of the sender.
136 2. The EXPERIMENTAL_TPDA feature has been renamed to EXPERIMENTAL_EVENT
137 and several new events have been created. The reason is because it has
138 been expanded beyond just firing events during the transport phase. Any
139 existing TPDA transport options will have to be rewritten to use a new
140 $event_name expansion variable in a condition. Refer to the
141 experimental-spec.txt for details and examples.
143 3. The EXPERIMENTAL_CERTNAMES features is an enhancement to verify that
144 server certs used for TLS match the result of the MX lookup. It does
145 not use the same mechanism as DANE.
155 1. If built with the EXPERIMENTAL_PROXY feature enabled, Exim can be
156 configured to expect an initial header from a proxy that will make the
157 actual external source IP:host be used in exim instead of the IP of the
158 proxy that is connecting to it.
160 2. New verify option header_names_ascii, which will check to make sure
161 there are no non-ASCII characters in header names. Exim itself handles
162 those non-ASCII characters, but downstream apps may not, so Exim can
163 detect and reject if those characters are present.
165 3. New expansion operator ${utf8clean:string} to replace malformed UTF8
166 codepoints with valid ones.
168 4. New malware type "sock". Talks over a Unix or TCP socket, sending one
169 command line and matching a regex against the return data for trigger
170 and a second regex to extract malware_name. The mail spoolfile name can
171 be included in the command line.
173 5. The smtp transport now supports options "tls_verify_hosts" and
174 "tls_try_verify_hosts". If either is set the certificate verification
175 is split from the encryption operation. The default remains that a failed
176 verification cancels the encryption.
178 6. New SERVERS override of default ldap server list. In the ACLs, an ldap
179 lookup can now set a list of servers to use that is different from the
182 7. New command-line option -C for exiqgrep to specify alternate exim.conf
183 file when searching the queue.
185 8. OCSP now supports GnuTLS also, if you have version 3.1.3 or later of that.
187 9. Support for DNSSEC on outbound connections.
189 10. New variables "tls_(in,out)_(our,peer)cert" and expansion item
190 "certextract" to extract fields from them. Hash operators md5 and sha1
191 work over them for generating fingerprints, and a new sha256 operator
194 11. PRDR is now supported dy default.
196 12. OCSP stapling is now supported by default.
198 13. If built with the EXPERIMENTAL_DSN feature enabled, Exim will output
199 Delivery Status Notification messages in MIME format, and negociate
200 DSN features per RFC 3461.
206 1. New command-line option -bI:sieve will list all supported sieve extensions
207 of this Exim build on standard output, one per line.
208 ManageSieve (RFC 5804) providers managing scripts for use by Exim should
209 query this to establish the correct list to include in the protocol's
210 SIEVE capability line.
212 2. If the -n option is combined with the -bP option, then the name of an
213 emitted option is not output, only the value (if visible to you).
214 For instance, "exim -n -bP pid_file_path" should just emit a pathname
215 followed by a newline, and no other text.
217 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
218 has a "tls_dh_min_bits" option, to set the minimum acceptable number of
219 bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
220 acceptable for security. (Option accepted but ignored if using OpenSSL).
221 Defaults to 1024, the old value. May be lowered only to 512, or raised as
222 far as you like. Raising this may hinder TLS interoperability with other
223 sites and is not currently recommended. Lowering this will permit you to
224 establish a TLS session which is not as secure as you might like.
226 Unless you really know what you are doing, leave it alone.
228 4. If not built with DISABLE_DNSSEC, Exim now has the main option
229 dns_dnssec_ok; if set to 1 then Exim will initialise the resolver library
230 to send the DO flag to your recursive resolver. If you have a recursive
231 resolver, which can set the Authenticated Data (AD) flag in results, Exim
232 can now detect this. Exim does not perform validation itself, instead
233 relying upon a trusted path to the resolver.
235 Current status: work-in-progress; $sender_host_dnssec variable added.
237 5. DSCP support for outbound connections: on a transport using the smtp driver,
238 set "dscp = ef", for instance, to cause the connections to have the relevant
239 DSCP (IPv4 TOS or IPv6 TCLASS) value in the header.
241 Similarly for inbound connections, there is a new control modifier, dscp,
242 so "warn control = dscp/ef" in the connect ACL, or after authentication.
244 Supported values depend upon system libraries. "exim -bI:dscp" to list the
245 ones Exim knows of. You can also set a raw number 0..0x3F.
247 6. The -G command-line flag is no longer ignored; it is now equivalent to an
248 ACL setting "control = suppress_local_fixups". The -L command-line flag
249 is now accepted and forces use of syslog, with the provided tag as the
250 process name. A few other flags used by Sendmail are now accepted and
253 7. New cutthrough routing feature. Requested by a "control = cutthrough_delivery"
254 ACL modifier; works for single-recipient mails which are recieved on and
255 deliverable via SMTP. Using the connection made for a recipient verify,
256 if requested before the verify, or a new one made for the purpose while
257 the inbound connection is still active. The bulk of the mail item is copied
258 direct from the inbound socket to the outbound (as well as the spool file).
259 When the source notifies the end of data, the data acceptance by the destination
260 is negociated before the acceptance is sent to the source. If the destination
261 does not accept the mail item, for example due to content-scanning, the item
262 is not accepted from the source and therefore there is no need to generate
263 a bounce mail. This is of benefit when providing a secondary-MX service.
264 The downside is that delays are under the control of the ultimate destination
267 The Recieved-by: header on items delivered by cutthrough is generated
268 early in reception rather than at the end; this will affect any timestamp
269 included. The log line showing delivery is recorded before that showing
270 reception; it uses a new ">>" tag instead of "=>".
272 To support the feature, verify-callout connections can now use ESMTP and TLS.
273 The usual smtp transport options are honoured, plus a (new, default everything)
274 hosts_verify_avoid_tls.
276 New variable families named tls_in_cipher, tls_out_cipher etc. are introduced
277 for specific access to the information for each connection. The old names
278 are present for now but deprecated.
280 Not yet supported: IGNOREQUOTA, SIZE, PIPELINING.
282 8. New expansion operators ${listnamed:name} to get the content of a named list
283 and ${listcount:string} to count the items in a list.
285 9. New global option "gnutls_allow_auto_pkcs11", defaults false. The GnuTLS
286 rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11
287 modules. For some situations this is desirable, but we expect admin in
288 those situations to know they want the feature. More commonly, it means
289 that GUI user modules get loaded and are broken by the setuid Exim being
290 unable to access files specified in environment variables and passed
291 through, thus breakage. So we explicitly inhibit the PKCS11 initialisation
292 unless this new option is set.
294 Some older OS's with earlier versions of GnuTLS might not have pkcs11 ability,
295 so have also added a build option which can be used to build Exim with GnuTLS
296 but without trying to use any kind of PKCS11 support. Uncomment this in the
299 AVOID_GNUTLS_PKCS11=yes
301 10. The "acl = name" condition on an ACL now supports optional arguments.
302 New expansion item "${acl {name}{arg}...}" and expansion condition
303 "acl {{name}{arg}...}" are added. In all cases up to nine arguments
304 can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL.
305 Variable $acl_narg contains the number of arguments. If the ACL sets
306 a "message =" value this becomes the result of the expansion item,
307 or the value of $value for the expansion condition. If the ACL returns
308 accept the expansion condition is true; if reject, false. A defer
309 return results in a forced fail.
311 11. Routers and transports can now have multiple headers_add and headers_remove
312 option lines. The concatenated list is used.
314 12. New ACL modifier "remove_header" can remove headers before message gets
315 handled by routers/transports.
317 13. New dnsdb lookup pseudo-type "a+". A sequence of "a6" (if configured),
318 "aaaa" and "a" lookups is done and the full set of results returned.
320 14. New expansion variable $headers_added with content from ACL add_header
321 modifier (but not yet added to message).
323 15. New 8bitmime status logging option for received messages. Log field "M8S".
325 16. New authenticated_sender logging option, adding to log field "A".
327 17. New expansion variables $router_name and $transport_name. Useful
328 particularly for debug_print as -bt commandline option does not
329 require privilege whereas -d does.
331 18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a
332 proposed extension to SMTP from Eric Hall.
334 19. The pipe transport has gained the force_command option, to allow
335 decorating commands from user .forward pipe aliases with prefix
336 wrappers, for instance.
338 20. Callout connections can now AUTH; the same controls as normal delivery
341 21. Support for DMARC, using opendmarc libs, can be enabled. It adds new
342 options: dmarc_forensic_sender, dmarc_history_file, and dmarc_tld_file.
343 It adds new expansion variables $dmarc_ar_header, $dmarc_status,
344 $dmarc_status_text, and $dmarc_used_domain. It adds a new acl modifier
345 dmarc_status. It adds new control flags dmarc_disable_verify and
346 dmarc_enable_forensic.
348 22. Add expansion variable $authenticated_fail_id, which is the username
349 provided to the authentication method which failed. It is available
350 for use in subsequent ACL processing (typically quit or notquit ACLs).
352 23. New ACL modifer "udpsend" can construct a UDP packet to send to a given
355 24. New ${hexquote:..string..} expansion operator converts non-printable
356 characters in the string to \xNN form.
358 25. Experimental TPDA (Transport Post Delivery Action) function added.
359 Patch provided by Axel Rau.
361 26. Experimental Redis lookup added. Patch provided by Warren Baker.
367 1. New authenticator driver, "gsasl". Server-only (at present).
368 This is a SASL interface, licensed under GPL, which can be found at
369 http://www.gnu.org/software/gsasl/.
370 This system does not provide sources of data for authentication, so
371 careful use needs to be made of the conditions in Exim.
373 2. New authenticator driver, "heimdal_gssapi". Server-only.
374 A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
375 is no longer honoured for setuid programs by Heimdal. Use the
376 "server_keytab" option to point to the keytab.
378 3. The "pkg-config" system can now be used when building Exim to reference
379 cflags and library information for lookups and authenticators, rather
380 than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and
381 "LOOKUP_LIBS" directly. Similarly for handling the TLS library support
382 without adjusting "TLS_INCLUDE" and "TLS_LIBS".
384 In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to
385 find the headers and libraries for PCRE.
387 4. New expansion variable $tls_bits.
389 5. New lookup type, "dbmjz". Key is an Exim list, the elements of which will
390 be joined together with ASCII NUL characters to construct the key to pass
391 into the DBM library. Can be used with gsasl to access sasldb2 files as
394 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1.
396 Avoid release 1.0.1a if you can. Note that the default value of
397 "openssl_options" is no longer "+dont_insert_empty_fragments", as that
398 increased susceptibility to attack. This may still have interoperability
399 implications for very old clients (see version 4.31 change 37) but
400 administrators can choose to make the trade-off themselves and restore
401 compatibility at the cost of session security.
403 7. Use of the new expansion variable $tls_sni in the main configuration option
404 tls_certificate will cause Exim to re-expand the option, if the client
405 sends the TLS Server Name Indication extension, to permit choosing a
406 different certificate; tls_privatekey will also be re-expanded. You must
407 still set these options to expand to valid files when $tls_sni is not set.
409 The SMTP Transport has gained the option tls_sni, which will set a hostname
410 for outbound TLS sessions, and set $tls_sni too.
412 A new log_selector, +tls_sni, has been added, to log received SNI values
413 for Exim as a server.
415 8. The existing "accept_8bitmime" option now defaults to true. This means
416 that Exim is deliberately not strictly RFC compliant. We're following
417 Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default.
418 Those who disagree, or know that they are talking to mail servers that,
419 even today, are not 8-bit clean, need to turn off this option.
421 9. Exim can now be started with -bw (with an optional timeout, given as
422 -bw<timespec>). With this, stdin at startup is a socket that is
423 already listening for connections. This has a more modern name of
424 "socket activation", but forcing the activated socket to fd 0. We're
425 interested in adding more support for modern variants.
427 10. ${eval } now uses 64-bit values on supporting platforms. A new "G" suffix
428 for numbers indicates multiplication by 1024^3.
430 11. The GnuTLS support has been revamped; the three options gnutls_require_kx,
431 gnutls_require_mac & gnutls_require_protocols are no longer supported.
432 tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority
433 string, documentation for which is at:
434 http://www.gnutls.org/manual/html_node/Priority-Strings.html
436 SNI support has been added to Exim's GnuTLS integration too.
438 For sufficiently recent GnuTLS libraries, ${randint:..} will now use
439 gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness.
441 12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file
442 is now available. If the contents of the file are valid, then Exim will
443 send that back in response to a TLS status request; this is OCSP Stapling.
444 Exim will not maintain the contents of the file in any way: administrators
445 are responsible for ensuring that it is up-to-date.
447 See "experimental-spec.txt" for more details.
449 13. ${lookup dnsdb{ }} supports now SPF record types. They are handled
450 identically to TXT record lookups.
452 14. New expansion variable $tod_epoch_l for higher-precision time.
454 15. New global option tls_dh_max_bits, defaulting to current value of NSS
455 hard-coded limit of DH ephemeral bits, to fix interop problems caused by
456 GnuTLS 2.12 library recommending a bit count higher than NSS supports.
458 16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier.
459 Option can now be a path or an identifier for a standard prime.
460 If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23".
461 Set to "historic" to get the old GnuTLS behaviour of auto-generated DH
464 17. SSLv2 now disabled by default in OpenSSL. (Never supported by GnuTLS).
465 Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL
466 install was not built with OPENSSL_NO_SSL2 ("no-ssl2").
472 1. New options for the ratelimit ACL condition: /count= and /unique=.
473 The /noupdate option has been replaced by a /readonly option.
475 2. The SMTP transport's protocol option may now be set to "smtps", to
476 use SSL-on-connect outbound.
478 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
479 there is a problem talking to the AV scanner, or the AV scanner running.
481 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
482 and check if the search item is a member of the list. This does not
483 support named lists, but does subject the list part to string expansion.
485 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was
486 built, Exim no longer performs string expansion on the second string of
487 the match_* expansion conditions: "match_address", "match_domain",
488 "match_ip" & "match_local_part". Named lists can still be used.
494 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on
495 or off in the resolver library.
501 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there
502 is now LDAP/TLS support, given sufficiently modern OpenLDAP client
503 libraries. The following global options have been added in support of
504 this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key,
505 ldap_cipher_suite, ldap_require_cert, ldap_start_tls.
507 2. The pipe transport now takes a boolean option, "freeze_signal", default
508 false. When true, if the external delivery command exits on a signal then
509 Exim will freeze the message in the queue, instead of generating a bounce.
511 3. Log filenames may now use %M as an escape, instead of %D (still available).
512 The %M pattern expands to yyyymm, providing month-level resolution.
514 4. The $message_linecount variable is now updated for the maildir_tag option,
515 in the same way as $message_size, to reflect the real number of lines,
516 including any header additions or removals from transport.
518 5. When contacting a pool of SpamAssassin servers configured in spamd_address,
519 Exim now selects entries randomly, to better scale in a cluster setup.
525 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux)
526 the flaw permitted the Exim run-time user to cause root to append to
527 arbitrary files of the attacker's choosing, with the content based
528 on content supplied by the attacker.
530 2. Exim now supports loading some lookup types at run-time, using your
531 platform's dlopen() functionality. This has limited platform support
532 and the intention is not to support every variant, it's limited to
533 dlopen(). This permits the main Exim binary to not be linked against
534 all the libraries needed for all the lookup types.
540 NOTE: this version is not guaranteed backwards-compatible, please read the
541 items below carefully
543 1. A new main configuration option, "openssl_options", is available if Exim
544 is built with SSL support provided by OpenSSL. The option allows
545 administrators to specify OpenSSL options to be used on connections;
546 typically this is to set bug compatibility features which the OpenSSL
547 developers have not enabled by default. There may be security
548 consequences for certain options, so these should not be changed
551 2. A new pipe transport option, "permit_coredumps", may help with problem
552 diagnosis in some scenarios. Note that Exim is typically installed as
553 a setuid binary, which on most OSes will inhibit coredumps by default,
554 so that safety mechanism would have to be overridden for this option to
555 be able to take effect.
557 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
558 Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
559 Note that this switches Exim to use a new API ("INSTREAM") and a future
560 release of ClamAV will remove support for the old API ("STREAM").
562 The av_scanner option, when set to "clamd", now takes an optional third
563 part, "local", which causes Exim to pass a filename to ClamAV instead of
564 the file content. This is the same behaviour as when clamd is pointed at
565 a Unix-domain socket. For example:
567 av_scanner = clamd:192.0.2.3 1234:local
569 ClamAV's ExtendedDetectionInfo response format is now handled.
571 4. There is now a -bmalware option, restricted to admin users. This option
572 takes one parameter, a filename, and scans that file with Exim's
573 malware-scanning framework. This is intended purely as a debugging aid
574 to ensure that Exim's scanning is working, not to replace other tools.
575 Note that the ACL framework is not invoked, so if av_scanner references
576 ACL variables without a fallback then this will fail.
578 5. There is a new expansion operator, "reverse_ip", which will reverse IP
579 addresses; IPv4 into dotted quad, IPv6 into dotted nibble. Examples:
581 ${reverse_ip:192.0.2.4}
583 ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
584 -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
586 6. There is a new ACL control called "debug", to enable debug logging.
587 This allows selective logging of certain incoming transactions within
588 production environments, with some care. It takes two options, "tag"
589 and "opts"; "tag" is included in the filename of the log and "opts"
590 is used as per the -d<options> command-line option. Examples, which
591 don't all make sense in all contexts:
594 control = debug/tag=.$sender_host_address
595 control = debug/opts=+expand+acl
596 control = debug/tag=.$message_exim_id/opts=+expand
598 7. It has always been implicit in the design and the documentation that
599 "the Exim user" is not root. src/EDITME said that using root was
600 "very strongly discouraged". This is not enough to keep people from
601 shooting themselves in the foot in days when many don't configure Exim
602 themselves but via package build managers. The security consequences of
603 running various bits of network code are severe if there should be bugs in
604 them. As such, the Exim user may no longer be root. If configured
605 statically, Exim will refuse to build. If configured as ref:user then Exim
606 will exit shortly after start-up. If you must shoot yourself in the foot,
607 then henceforth you will have to maintain your own local patches to strip
610 8. There is a new expansion condition, bool_lax{}. Where bool{} uses the ACL
611 condition logic to determine truth/failure and will fail to expand many
612 strings, bool_lax{} uses the router condition logic, where most strings
614 Note: bool{00} is false, bool_lax{00} is true.
616 9. Routers now support multiple "condition" tests.
618 10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
619 Setting this allows an admin to define which entry in the tcpwrappers
620 config file will be used to control access to the daemon. This option
621 is only available when Exim is built with USE_TCP_WRAPPERS. The
622 default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
625 11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
626 the Exim run-time user, instead of root.
628 12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
629 is forced on. This is mitigated by the new build option
630 TRUSTED_CONFIG_LIST which defines a list of configuration files which
631 are trusted; one per line. If a config file is owned by root and matches
632 a pathname in the list, then it may be invoked by the Exim build-time
633 user without Exim relinquishing root privileges.
635 13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
636 trusted to supply -D<Macro[=Value]> overrides on the command-line. Going
637 forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
638 include the main config. As a transition mechanism, we are temporarily
639 providing a work-around: the new build option WHITELIST_D_MACROS provides
640 a colon-separated list of macro names which may be overridden by the Exim
641 run-time user. The values of these macros are constrained to the regex
642 ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
648 1. TWO SECURITY FIXES: one relating to mail-spools which are globally
649 writable, the other to locking of MBX folders (not mbox).
651 2. MySQL stored procedures are now supported.
653 3. The dkim_domain transport option is now a list, not a single string, and
654 messages will be signed for each element in the list (discarding
657 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups
658 in the presence of multiple character strings within the RR. Prior to 4.70,
659 only the first string would be returned. The dnsdb lookup now, by default,
660 preserves the pre-4.70 semantics, but also now takes an extended output
661 separator specification. The separator can be followed by a semicolon, to
662 concatenate the individual text strings together with no join character,
663 or by a comma and a second separator character, in which case the text
664 strings within a TXT record are joined on that second character.
665 Administrators are reminded that DNS provides no ordering guarantees
666 between multiple records in an RRset. For example:
668 foo.example. IN TXT "a" "b" "c"
669 foo.example. IN TXT "d" "e" "f"
671 ${lookup dnsdb{>/ txt=foo.example}} -> "a/d"
672 ${lookup dnsdb{>/; txt=foo.example}} -> "def/abc"
673 ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f"
679 1. Native DKIM support without an external library.
680 (Note that if no action to prevent it is taken, a straight upgrade will
681 result in DKIM verification of all signed incoming emails. See spec
682 for details on conditionally disabling)
684 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha).
686 3. There is now a bool{} expansion condition which maps certain strings to
687 true/false condition values (most likely of use in conjunction with the
688 and{} expansion operator).
690 4. The $spam_score, $spam_bar and $spam_report variables are now available
693 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as
694 options, provided that Exim is invoked by an admin_user.
696 6. There is a new option gnutls_compat_mode, when linked against GnuTLS,
697 which increases compatibility with older clients at the cost of decreased
698 security. Don't set this unless you need to support such clients.
700 7. There is a new expansion operator, ${randint:...} which will produce a
701 "random" number less than the supplied integer. This randomness is
702 not guaranteed to be cryptographically strong, but depending upon how
703 Exim was built may be better than the most naive schemes.
705 8. Exim now explicitly ensures that SHA256 is available when linked against
708 9. The transport_filter_timeout option now applies to SMTP transports too.
714 1. Preliminary DKIM support in Experimental.
720 1. The body_linecount and body_zerocount C variables are now exported in the
723 2. When a dnslists lookup succeeds, the key that was looked up is now placed
724 in $dnslist_matched. When the key is an IP address, it is not reversed in
725 this variable (though it is, of course, in the actual lookup). In simple
728 deny dnslists = spamhaus.example
730 the key is also available in another variable (in this case,
731 $sender_host_address). In more complicated cases, however, this is not
732 true. For example, using a data lookup might generate a dnslists lookup
735 deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
737 If this condition succeeds, the value in $dnslist_matched might be
738 192.168.6.7 (for example).
740 3. Authenticators now have a client_condition option. When Exim is running as
741 a client, it skips an authenticator whose client_condition expansion yields
742 "0", "no", or "false". This can be used, for example, to skip plain text
743 authenticators when the connection is not encrypted by a setting such as:
745 client_condition = ${if !eq{$tls_cipher}{}}
747 Note that the 4.67 documentation states that $tls_cipher contains the
748 cipher used for incoming messages. In fact, during SMTP delivery, it
749 contains the cipher used for the delivery. The same is true for
752 4. There is now a -Mvc <message-id> option, which outputs a copy of the
753 message to the standard output, in RFC 2822 format. The option can be used
754 only by an admin user.
756 5. There is now a /noupdate option for the ratelimit ACL condition. It
757 computes the rate and checks the limit as normal, but it does not update
758 the saved data. This means that, in relevant ACLs, it is possible to lookup
759 the existence of a specified (or auto-generated) ratelimit key without
760 incrementing the ratelimit counter for that key.
762 In order for this to be useful, another ACL entry must set the rate
763 for the same key somewhere (otherwise it will always be zero).
768 # Read the rate; if it doesn't exist or is below the maximum
770 deny ratelimit = 100 / 5m / strict / noupdate
771 log_message = RATE: $sender_rate / $sender_rate_period \
772 (max $sender_rate_limit)
774 [... some other logic and tests...]
776 warn ratelimit = 100 / 5m / strict / per_cmd
777 log_message = RATE UPDATE: $sender_rate / $sender_rate_period \
778 (max $sender_rate_limit)
779 condition = ${if le{$sender_rate}{$sender_rate_limit}}
783 6. The variable $max_received_linelength contains the number of bytes in the
784 longest line that was received as part of the message, not counting the
785 line termination character(s).
787 7. Host lists can now include +ignore_defer and +include_defer, analagous to
788 +ignore_unknown and +include_unknown. These options should be used with
789 care, probably only in non-critical host lists such as whitelists.
791 8. There's a new option called queue_only_load_latch, which defaults true.
792 If set false when queue_only_load is greater than zero, Exim re-evaluates
793 the load for each incoming message in an SMTP session. Otherwise, once one
794 message is queued, the remainder are also.
796 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most
797 cases when an SMTP session ends without sending QUIT. However, when Exim
798 itself is is bad trouble, such as being unable to write to its log files,
799 this ACL is not run, because it might try to do things (such as write to
800 log files) that make the situation even worse.
802 Like the QUIT ACL, this new ACL is provided to make it possible to gather
803 statistics. Whatever it returns (accept or deny) is immaterial. The "delay"
804 modifier is forbidden in this ACL.
806 When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set
807 to a string that indicates the reason for the termination of the SMTP
808 connection. The possible values are:
810 acl-drop Another ACL issued a "drop" command
811 bad-commands Too many unknown or non-mail commands
812 command-timeout Timeout while reading SMTP commands
813 connection-lost The SMTP connection has been lost
814 data-timeout Timeout while reading message data
815 local-scan-error The local_scan() function crashed
816 local-scan-timeout The local_scan() function timed out
817 signal-exit SIGTERM or SIGINT
818 synchronization-error SMTP synchronization error
819 tls-failed TLS failed to start
821 In most cases when an SMTP connection is closed without having received
822 QUIT, Exim sends an SMTP response message before actually closing the
823 connection. With the exception of acl-drop, the default message can be
824 overridden by the "message" modifier in the NOTQUIT ACL. In the case of a
825 "drop" verb in another ACL, it is the message from the other ACL that is
828 10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of
829 servers with individual queries. This is done by starting the query with
830 "servers=x:y:z;", where each item in the list may take one of two forms:
832 (1) If it is just a host name, the appropriate global option (mysql_servers
833 or pgsql_servers) is searched for a host of the same name, and the
834 remaining parameters (database, user, password) are taken from there.
836 (2) If it contains any slashes, it is taken as a complete parameter set.
838 The list of servers is used in exactly the same was as the global list.
839 Once a connection to a server has happened and a query has been
840 successfully executed, processing of the lookup ceases.
842 This feature is intended for use in master/slave situations where updates
843 are occurring, and one wants to update a master rather than a slave. If the
844 masters are in the list for reading, you might have:
846 mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw
848 In an updating lookup, you could then write
850 ${lookup mysql{servers=master; UPDATE ...}
852 If, on the other hand, the master is not to be used for reading lookups:
854 pgsql_servers = slave1/db/name/pw:slave2/db/name/pw
856 you can still update the master by
858 ${lookup pgsql{servers=master/db/name/pw; UPDATE ...}
860 11. The message_body_newlines option (default FALSE, for backwards
861 compatibility) can be used to control whether newlines are present in
862 $message_body and $message_body_end. If it is FALSE, they are replaced by
869 1. There is a new log selector called smtp_no_mail, which is not included in
870 the default setting. When it is set, a line is written to the main log
871 whenever an accepted SMTP connection terminates without having issued a
874 2. When an item in a dnslists list is followed by = and & and a list of IP
875 addresses, the behaviour was not clear when the lookup returned more than
876 one IP address. This has been solved by the addition of == and =& for "all"
877 rather than the default "any" matching.
879 3. Up till now, the only control over which cipher suites GnuTLS uses has been
880 for the cipher algorithms. New options have been added to allow some of the
881 other parameters to be varied.
883 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is
884 set, Exim compiles a runtime option called disable_fsync.
886 5. There is a new variable called $smtp_count_at_connection_start.
888 6. There's a new control called no_pipelining.
890 7. There are two new variables called $sending_ip_address and $sending_port.
891 These are set whenever an SMTP connection to another host has been set up.
893 8. The expansion of the helo_data option in the smtp transport now happens
894 after the connection to the server has been made.
896 9. There is a new expansion operator ${rfc2047d: that decodes strings that
897 are encoded as per RFC 2047.
899 10. There is a new log selector called "pid", which causes the current process
900 id to be added to every log line, in square brackets, immediately after the
903 11. Exim has been modified so that it flushes SMTP output before implementing
904 a delay in an ACL. It also flushes the output before performing a callout,
905 as this can take a substantial time. These behaviours can be disabled by
906 obeying control = no_delay_flush or control = no_callout_flush,
907 respectively, at some earlier stage of the connection.
909 12. There are two new expansion conditions that iterate over a list. They are
910 called forany and forall.
912 13. There's a new global option called dsn_from that can be used to vary the
913 contents of From: lines in bounces and other automatically generated
914 messages ("delivery status notifications" - hence the name of the option).
916 14. The smtp transport has a new option called hosts_avoid_pipelining.
918 15. By default, exigrep does case-insensitive matches. There is now a -I option
919 that makes it case-sensitive.
921 16. A number of new features ("addresses", "map", "filter", and "reduce") have
922 been added to string expansions to make it easier to process lists of
923 items, typically addresses.
925 17. There's a new ACL modifier called "continue". It does nothing of itself,
926 and processing of the ACL always continues with the next condition or
927 modifier. It is provided so that the side effects of expanding its argument
930 18. It is now possible to use newline and other control characters (those with
931 values less than 32, plus DEL) as separators in lists.
933 19. The exigrep utility now has a -v option, which inverts the matching
936 20. The host_find_failed option in the manualroute router can now be set to
943 No new features were added to 4.66.
949 No new features were added to 4.65.
955 1. ACL variables can now be given arbitrary names, as long as they start with
956 "acl_c" or "acl_m" (for connection variables and message variables), are at
957 least six characters long, with the sixth character being either a digit or
960 2. There is a new ACL modifier called log_reject_target. It makes it possible
961 to specify which logs are used for messages about ACL rejections.
963 3. There is a new authenticator called "dovecot". This is an interface to the
964 authentication facility of the Dovecot POP/IMAP server, which can support a
965 number of authentication methods.
967 4. The variable $message_headers_raw provides a concatenation of all the
968 messages's headers without any decoding. This is in contrast to
969 $message_headers, which does RFC2047 decoding on the header contents.
971 5. In a DNS black list, if two domain names, comma-separated, are given, the
972 second is used first to do an initial check, making use of any IP value
973 restrictions that are set. If there is a match, the first domain is used,
974 without any IP value restrictions, to get the TXT record.
976 6. All authenticators now have a server_condition option.
978 7. There is a new command-line option called -Mset. It is useful only in
979 conjunction with -be (that is, when testing string expansions). It must be
980 followed by a message id; Exim loads the given message from its spool
981 before doing the expansions.
983 8. Another similar new command-line option is called -bem. It operates like
984 -be except that it must be followed by the name of a file that contains a
987 9. When an address is delayed because of a 4xx response to a RCPT command, it
988 is now the combination of sender and recipient that is delayed in
989 subsequent queue runs until its retry time is reached.
991 10. Unary negation and the bitwise logical operators and, or, xor, not, and
992 shift, have been added to the eval: and eval10: expansion items.
994 11. The variables $interface_address and $interface_port have been renamed
995 as $received_ip_address and $received_port, to make it clear that they
996 relate to message reception rather than delivery. (The old names remain
997 available for compatibility.)
999 12. The "message" modifier can now be used on "accept" and "discard" acl verbs
1000 to vary the message that is sent when an SMTP command is accepted.
1006 1. There is a new Boolean option called filter_prepend_home for the redirect
1009 2. There is a new acl, set by acl_not_smtp_start, which is run right at the
1010 start of receiving a non-SMTP message, before any of the message has been
1013 3. When an SMTP error message is specified in a "message" modifier in an ACL,
1014 or in a :fail: or :defer: message in a redirect router, Exim now checks the
1015 start of the message for an SMTP error code.
1017 4. There is a new parameter for LDAP lookups called "referrals", which takes
1018 one of the settings "follow" (the default) or "nofollow".
1020 5. Version 20070721.2 of exipick now included, offering these new options:
1022 After all other sorting options have bee processed, reverse order
1023 before displaying messages (-R is synonym).
1025 Randomize order of matching messages before displaying.
1027 Instead of displaying the matching messages, display the sum
1029 --sort <variable>[,<variable>...]
1030 Before displaying matching messages, sort the messages according to
1031 each messages value for each variable.
1033 Negate the value for every test (returns inverse output from the
1034 same criteria without --not).
1040 1. The ${readsocket expansion item now supports Internet domain sockets as well
1041 as Unix domain sockets. If the first argument begins "inet:", it must be of
1042 the form "inet:host:port". The port is mandatory; it may be a number or the
1043 name of a TCP port in /etc/services. The host may be a name, or it may be an
1044 IP address. An ip address may optionally be enclosed in square brackets.
1045 This is best for IPv6 addresses. For example:
1047 ${readsocket{inet:[::1]:1234}{<request data>}...
1049 Only a single host name may be given, but if looking it up yield more than
1050 one IP address, they are each tried in turn until a connection is made. Once
1051 a connection has been made, the behaviour is as for ${readsocket with a Unix
1054 2. If a redirect router sets up file or pipe deliveries for more than one
1055 incoming address, and the relevant transport has batch_max set greater than
1056 one, a batch delivery now occurs.
1058 3. The appendfile transport has a new option called maildirfolder_create_regex.
1059 Its value is a regular expression. For a maildir delivery, this is matched
1060 against the maildir directory; if it matches, Exim ensures that a
1061 maildirfolder file is created alongside the new, cur, and tmp directories.
1067 The documentation is up-to-date for the 4.61 release. Major new features since
1068 the 4.60 release are:
1070 . An option called disable_ipv6, to disable the use of IPv6 completely.
1072 . An increase in the number of ACL variables to 20 of each type.
1074 . A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
1075 $2, $3, (though those are still set) because the numeric variables get used
1076 for other things in complicated expansions.
1078 . The default for rfc1413_query_timeout has been changed from 30s to 5s.
1080 . It is possible to use setclassresources() on some BSD OS to control the
1081 resources used in pipe deliveries.
1083 . A new ACL modifier called add_header, which can be used with any verb.
1085 . More errors are detectable in retry rules.
1087 There are a number of other additions too.
1093 The documentation is up-to-date for the 4.60 release. Major new features since
1094 the 4.50 release are:
1096 . Support for SQLite.
1098 . Support for IGNOREQUOTA in LMTP.
1100 . Extensions to the "submission mode" features.
1102 . Support for Client SMTP Authorization (CSA).
1104 . Support for ratelimiting hosts and users.
1106 . New expansion items to help with the BATV "prvs" scheme.
1108 . A "match_ip" condition, that matches an IP address against a list.
1110 There are many more minor changes.
git://git.exim.org / exim.git / blob