4 This file contains complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.72.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_localhost boolean false smtp 1.73
82 allow_mx_to_ip boolean false main 3.14
83 allow_symlink boolean false appendfile
84 allow_utf8_domains boolean false main 4.14
85 arc_sign string* unset smtp 4.91 with Experimental_ARC
86 auth_advertise_hosts host list "*" main 4.00
87 authenticated_sender string* unset smtp 4.14
88 authenticated_sender_force boolean false smtp 4.61
89 authenticate_hosts host list unset smtp 3.13
90 auto_thaw time 0s main
91 av_scanner string* + main 4.50 with content scan
92 batch_id string unset appendfile 4.00
95 batch_max integer 100 appendfile
98 bcc string* unset autoreply
99 bi_command string unset main
100 body_only boolean false transports 2.05
101 bounce_message_file string* unset main 4.00 expanded from 4.94
102 bounce_message_text string unset main 4.00
103 bounce_return_body boolean true main 4.23
104 bounce_return_message boolean true main 4.00
105 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
106 bounce_sender_authentication string unset main 4.00
107 callout_domain_negative_expire time 3h main 4.11
108 callout_domain_positive_expire time 7d main 4.11
109 callout_negative_expire time 2h main 4.11
110 callout_positive_expire time 24h main 4.11
111 callout_random_local_part string* + main 4.11
112 cannot_route_message string* unset routers 4.11
113 caseful_local_part boolean false routers 4.00
114 cc string* unset autoreply
115 check_ancestor boolean false redirect 4.00
116 check_group boolean false appendfile
118 check_local_user boolean false routers 4.00
119 check_log_inodes integer 0 main
120 check_log_space integer 0 main
121 check_owner boolean true appendfile 3.14
123 check_rfc2047_length boolean true main 4.60
124 check_secondary_mx boolean false dnslookup 4.00
125 check_spool_inodes integer 0 main
126 check_spool_space integer 0 main
127 check_string string "From " appendfile 3.03
129 check_srv string* unset dnslookup 4.31
130 client_authz string* unset gsasl 4.94
131 client_condition string* unset authenticators 4.68
132 client_ignore_invalid_base64 boolean false plaintext 4.61
133 client_name string* + cram_md5 3.10
134 client_password string* unset gsasl 4.94
135 client_secret string* unset cram_md5 3.10
136 client_send string* unset plaintext 3.10
137 unset external (auth) 4.93
138 client_username string* unset gsasl 4.94
139 command string* unset lmtp 3.20
141 unset queryprogram 4.00
142 command_group string unset queryprogram 4.00
143 command_timeout time 5m smtp
144 command_user string unset queryprogram 4.00
145 commandline_checks_require_admin boolean false main 4.90
146 condition string* unset routers 4.00
147 connect_timeout time 0s smtp 1.60
148 connection_max_messages integer 500 smtp 4.00 replaces batch_max
149 create_directory boolean true appendfile
150 create_file string "anywhere" appendfile
151 current_directory string unset transports 4.00
152 unset queryprogram 4.00
153 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
154 daemon_startup_retries int 9 main 4.52
155 daemon_startup_sleep time 30s main 4.52
156 dane_require_tls_ciphers string* unset smtp 4.91
157 data string unset redirect 4.00
158 data_timeout time 5m smtp
159 debug_print string* unset authenticators 4.00
161 unset transports 2.00
162 debug_store boolean false main 4.90
163 delay_after_cutoff boolean true smtp
164 delay_warning time list 24h main
165 delay_warning_condition string* + main 1.73
166 deliver_drop_privilege boolean false main 4.00
167 deliver_queue_load_max fixed-point unset main 1.70
168 delivery_date_add boolean false transports
169 delivery_date_remove boolean true main
170 dkim_canon string* unset smtp 4.70
171 dkim_domain string list* unset smtp 4.72
172 dkim_private_key string* unset smtp 4.70
173 dkim_selector string* unset smtp 4.70
174 dkim_sign_headers string* (RFC4871) smtp 4.70
175 dkim_strict string* unset smtp 4.70
176 dkim_timestamps integer* unset smtp 4.92
177 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
178 dkim_verify_keytypes string ed25519:rsa main 4.93
179 dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
180 dkim_verify_minimal boolean false main 4.93
181 dkim_verify_signers string* $dkim_signers main 4.70
182 directory string* unset appendfile
183 directory_file string* + appendfile
184 directory_mode octal-integer 0700 appendfile
185 directory_transport string* unset redirect 4.00
186 disable_ipv6 boolean false main 4.61
187 disable_logging boolean false routers 4.11
188 false transports 4.11
189 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
190 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
191 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
192 dns_again_means_nonexist domain list unset main 1.89
193 dns_check_names_pattern string + main 2.11
194 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
195 dns_csa_search_limit integer 5 main 4.60
196 dns_csa_use_reverse boolean true main 4.60
197 dns_dnssec_ok integer -1 main 4.82
198 dns_dane_ok integer -1 main 4.83
199 dns_ipv4_lookup boolean false main 3.20
200 dns_qualify_single boolean true smtp
201 dns_retrans time 0s main 1.60
202 dns_retry integer 0 main 1.60
203 dns_search_parents boolean false smtp
204 dns_use_edns0 integer -1 main 4.76
205 domains domain list unset routers 4.00
206 driver string unset authenticators
209 drop_cr boolean false main 4.00 became a no-op in 4.21
210 dscp string unset smtp 4.82
211 dsn_from string* + main 4.67
212 envelope_to_add boolean false transports
213 envelope_to_remove boolean true main
214 environment string* unset pipe 2.95
215 errors_copy string list* unset main
216 errors_reply_to string unset main
217 errors_to string* unset routers 4.00
218 escape_string string ">From " appendfile 3.03
220 exim_group string ++ main
221 exim_path string ++ main
222 exim_user string ++ main
223 exim_version string ++ main 4.93
224 expn boolean true routers
225 extra_local_interfaces string unset main 4.21
226 extract_addresses_remove_arguments boolean true main 1.92
227 fail_verify boolean false routers
228 fail_verify_recipient boolean false routers 4.00
229 fail_verify_sender boolean false routers 4.00
230 fallback_hosts string list unset routers 4.00
232 file string* unset appendfile
235 file_expand boolean false autoreply
236 file_format string unset appendfile 3.03
237 file_must_exist boolean false appendfile
238 file_optional boolean false autoreply
239 file_transport string* unset redirect 4.00
240 filter_prepend_home boolean true redirect 4.63
241 final_timeout time 10m smtp
242 finduser_retries integer 0 main
243 forbid_blackhole boolean false redirect 4.00
244 forbid_exim_filter boolean false redirect 4.44
245 forbid_fail boolean false redirect 4.00
246 forbid_file boolean false redirect 4.00
247 forbid_filter_existstest boolean false redirect 4.00
248 forbid_filter_logwrite boolean false redirect 4.00
249 forbid_filter_lookup boolean false redirect 4.00
250 forbid_filter_perl boolean false redirect 4.00
251 forbid_filter_readfile boolean false redirect 4.00
252 forbid_filter_readsocket boolean false redirect 4.11
253 forbid_filter_reply boolean false redirect 4.00
254 forbid_filter_run boolean false redirect 4.00
255 forbid_include boolean false redirect 4.00
256 forbid_pipe boolean false redirect 4.00
257 forbid_sieve_filter boolean false redirect 4.44
258 forbid_smtp_code boolean false redirect 4.63
259 force_command boolean false pipe 4.82
260 freeze_exec_fail boolean false pipe 1.89
261 freeze_signal boolean false pipe 4.75
262 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
263 from string* unset autoreply
264 gecos_name string* unset main
265 gecos_pattern string unset main
266 gethostbyname boolean false smtp
267 gnutls_allow_auto_pkcs11 boolean false main 4.82
268 gnutls_compat_mode boolean unset main 4.70
269 gnutls_require_kx string* unset main 4.67 deprecated, warns
270 string* unset smtp 4.67 deprecated, warns
271 gnutls_require_mac string* unset main 4.67 deprecated, warns
272 string* unset smtp 4.67 deprecated, warns
273 gnutls_require_protocols string* unset main 4.67 deprecated, warns
274 string* unset smtp 4.67 deprecated, warns
275 group string + routers 4.00
276 unset transports 4.00 replaces local option in some transports
277 header_line_maxsize integer 0 (unset) main 4.14
278 header_maxsize integer 1M main 4.14
279 headers string* unset autoreply
280 headers_add string* unset routers 4.00
282 headers_charset string ++ main 4.21
283 headers_only boolean false transports 2.05
284 headers_remove string* unset routers 4.00
286 headers_rewrite string unset transports 3.20
287 helo_accept_junk_hosts host list unset main 3.00
288 helo_allow_chars string "" main 4.02
289 helo_lookup_domains domain list unset main 4.00
290 helo_data string* "$primary_hostname" smtp 3.21
291 helo_try_verify_hosts host list unset main 4.00
292 helo_verify_hosts host list unset main 1.73
293 hide_child_in_errmsg false redirect 4.00
294 hold_domains domain list unset main 1.70
295 home_directory string* unset transports 4.00 replaces individual options
296 host_all_ignored string "defer" manualroute 4.67
297 host_find_failed string "freeze" manualroute 4.00
298 host_lookup host list unset main 3.00
299 host_lookup_order string list "bydns:byaddr" main 4.30
300 host_reject_connection host list unset main 4.00
301 hosts string unset iplookup 4.00
302 string list* unset smtp
303 hosts_avoid_esmtp host list unset smtp 4.21
304 hosts_avoid_pipelining host list unset smtp 4.67
305 hosts_avoid_tls host list unset smtp 3.20
306 hosts_connection_nolog host list unset main 4.43
307 hosts_max_try integer 5 smtp 3.20
308 hosts_max_try_hardlimit integer 50 smtp 4.50
309 hosts_nopass_tls host list unset smtp 4.00
310 hosts_noproxy_tls host list "*" smtp 4.90
311 hosts_override boolean false smtp 2.11
312 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
313 hosts_randomize boolean false manualroute 4.00
315 hosts_require_auth host list unset smtp 4.00
316 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
317 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
318 hosts_require_tls host list unset smtp 3.20
319 hosts_treat_as_local domain list unset main 1.95
320 hosts_try_auth host list unset smtp 4.00
321 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
322 hosts_try_fastopen host list unset smtp 4.88
323 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
324 ibase_servers string unset main 4.23
325 ignore_bounce_errors_after time 0s main 4.00
326 ignore_eacces boolean false redirect 4.00
327 ignore_enotdir boolean false redirect 4.00
328 ignore_fromline_hosts host list unset main
329 ignore_fromline_local boolean false main 2.05
330 ignore_status boolean false pipe
331 ignore_target_hosts host list unset routers 4.00
332 include_directory string unset redirect 4.00
333 initgroups false routers 4.00
334 interface string list unset smtp 1.70
335 keep_malformed time 4d main
336 keepalive boolean true smtp 2.05
337 ldap_default_servers string list unset main 3.02
338 ldap_version int 2 or 3 main 4.14
339 local_from_check boolean true main 3.14
340 local_from_prefix string unset main 3.14
341 local_from_suffix string unset main 3.14
342 local_interfaces string list unset main 1.60
343 local_part_prefix string unset routers 4.00 replaces prefix
344 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
345 local_part_suffix string unset routers 4.00 replaces suffix
346 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
347 local_parts string list* unset routers 4.00
348 local_scan_timeout time 5m main 4.03
349 local_sender_retain boolean false main 4.00
350 localhost_number string unset main
351 lock_fcntl_timeout time 0s appendfile 3.14
352 lock_flock_timeout time 0s appendfile 4.11
353 lock_interval time 3s appendfile
354 lock_retries integer 10 appendfile
355 lockfile_mode octal-integer 0600 appendfile
356 lockfile_timeout time 30m appendfile
357 log string* unset autoreply
358 log_as_local boolean + routers 4.00
359 log_file_path string list ++ main
360 log_defer_output boolean false pipe 1.89
361 log_fail_output boolean false pipe 1.60
362 log_output boolean false pipe 1.60
363 log_selector string unset main 4.00
364 log_timezone boolean false main 4.11
365 lookup_open_max integer 25 main 2.05
366 mailbox_filecount string* unset appendfile 4.43
367 mailbox_size string* unset appendfile 4.43
368 maildir_format boolean false appendfile 1.70
369 maildir_retries integer 10 appendfile 1.70
370 maildir_tag string* unset appendfile 1.92
371 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
372 maildirfolder_create_regex string unset appendfile 4.62
373 mailstore_format boolean false appendfile 2.00
374 mailstore_prefix string* unset appendfile 2.00
375 mailstore_suffix string* unset appendfile 2.00
376 match_directory string* unset localuser
377 max_output integer 20K pipe
378 max_rcpt integer 100 smtp 1.60
379 max_user_name_length integer 0 main
380 mbx_format boolean false appendfile 2.10
381 message_body_newlines boolean false main 4.68
382 message_body_visible integer 500 main
383 message_id_header_domain string* unset main 4.11
384 message_id_header_text string* unset main
385 message_linelength_limit integer 998 smtp 4.94
386 message_logs boolean true main 4.10
387 message_prefix string* + appendfile 4.00 replaces prefix
388 string* unset pipe 4.00 replaces prefix
389 message_size_limit integer 50M main
391 message_suffix string* + appendfile 4.00 replaces suffix
392 string* unset pipe 4.00 replaces suffix
393 mode octal-integer 0600 appendfile
395 mode_fail_narrower boolean true appendfile 1.70
396 modemask octal-integer 022 redirect 4.00
397 more boolean true routers 4.00
398 move_frozen_messages boolean false main 3.09
399 multi_domain boolean true smtp
400 mx_domains domain list unset dnslookup 4.00
401 mx_fail_domains domain list unset dnslookup 4.43
402 mysql_servers string list unset main 3.03
403 never_users string list unset main
404 notifier_socket string "$spool_directory/exim_daemon_notify"
406 notify_comsat boolean false appendfile
407 once string* unset autoreply
408 once_file_size integer 0 autoreply 3.20
409 once_repeat time 0s autoreply 2.95
410 one_time boolean false redirect 4.00
411 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
412 optional boolean false iplookup 4.00
413 oracle_servers string unset main 4.00
414 owners string list unset redirect 4.00
415 owngroups string list unset redirect 4.00
416 pass_on_timeout boolean false routers 4.00
417 pass_router string unset routers 4.00
418 path string "/usr/bin" pipe
419 percent_hack_domains domain list unset main
420 perl_at_start boolean false main 2.10
421 perl_startup string unset main 2.10
422 permit_coredump boolean false pipe 4.73
423 pgsql_servers string list unset main 3.14
424 pid_file_path string ++ main
425 pipe_as_creator boolean false pipe
426 pipe_transport string* unset redirect 4.00
427 pipelining_advertise_hosts host list "*" main 4.14
428 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
429 port integer 0 iplookup 4.00
431 preserve_message_logs boolean false main
432 prdr_enable boolean false main 4.82 if experimental_prdr
433 primary_hostname string + main
434 print_topbitchars boolean false main 1.89
435 process_log_path string unset main 4.21
436 prod_requires_admin boolean true main 1.70
437 protocol string "udp" iplookup 4.00
438 string "smtp" smtp 3.20
439 public_name string unset authenticators 3.10
440 qualify_domain string + main
441 string* unset redirect 4.31
442 qualify_preserve_domain boolean false redirect 4.00
443 qualify_recipient string + main
444 qualify_single boolean true dnslookup 4.00
445 query string* + iplookup 4.00
446 queue_domains domain list unset main 4.00
447 queue_fasst_ramp boolean false main 4.95
448 queue_list_requires_admin boolean true main 1.95
449 queue_only boolean false main
450 queue_only_file string unset main 2.05
451 queue_only_load fixed-point unset main
452 queue_only_load_latch boolean true main 4.68
453 queue_only_override boolean true main 4.21
454 queue_run_in_order boolean false main 1.70
455 queue_run_max integer 5 main
456 queue_smtp_domains domain list unset main
457 quota string* unset appendfile 1.60
458 quota_directory string* unset appendfile 4.11
459 quota_filecount integer 0 appendfile 2.05
460 quota_is_inclusive boolean true appendfile 3.20
461 quota_size_regex string unset appendfile 3.14
462 quota_warn_message string* + appendfile 2.10
463 quota_warn_threshold string* 0 appendfile 2.10
464 rcpt_include_affixes boolean false transports 4.21
465 receive_timeout time 0s main 4.00 replacing accept_timeout
466 received_header_text string* + main
467 received_headers_max integer 30 main
468 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
469 recipients_max integer 0 main 1.60
470 recipients_max_reject boolean false main 1.70
471 redirect_router string unset routers 4.00
472 remote_max_parallel integer 1 main
473 remote_sort_domains domain list unset main 4.00 replacing remote_sort
474 repeat_use boolean true redirect 4.00
475 reply_to string* unset autoreply 2.05
476 reply_transport string* unset redirect 4.00
477 require_files string list* unset routers 4.00
478 reroute string* unset iplookup 4.00
479 response_pattern string unset iplookup 4.00
480 restrict_to_path boolean false pipe
481 retry_data_expire time 7d main 3.03
482 retry_include_ip_address boolean true smtp 1.92
483 retry_interval_max time 24h main
484 retry_use_local_part boolean + routers 4.00
485 + transports 4.00 replacing individual options
486 return_fail_output boolean false pipe 1.60
487 return_message boolean false autoreply
488 return_output boolean false pipe
489 return_path string* unset transports 2.05
490 return_path_add boolean false transports
491 return_path_remove boolean true main
492 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
493 rewrite boolean true redirect 4.00
494 rewrite_headers boolean true dnslookup 4.00
495 rfc1413_hosts host list * main
496 rfc1413_query_timeout time 5s main
497 router_home_directory string* unset routers 4.11
498 route_data string* unset manualroute 4.00
499 route_list string list unset manualroute 4.00
500 same_domain_copy_routing boolean false dnslookup 4.00
501 search_parents boolean false dnslookup 4.00
502 self string "freeze" routers 4.00
503 sender_unqualified_hosts host list unset main
504 senders address list unset routers 4.00
505 serialize_hosts host list unset smtp 1.60
506 server_advertise_condition string* unset authenticators 4.14
507 server_channelbinding bool false gsasl 4.80
508 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
509 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
510 server_keytab string* unset heimdal_gssapi 4.80
511 server_mail_auth_condition string* unset authenticators 3.22
512 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
513 server_password string unset gsasl 4.80
514 server_param1 string* unset tls (auth) 4.86
515 server_param2 string* unset tls (auth) 4.86
516 server_param3 string* unset tls (auth) 4.86
517 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
518 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
519 server_prompts string* unset plaintext 3.10
520 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
521 server_scram_iter string* unset gsasl 4.80
522 server_scram_salt string* unset gsasl 4.80
523 server_secret string* unset cram_md5 3.10
524 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
525 server_set_id string* unset authenticators 3.10
526 set string* unset routers 4.93
527 shadow_condition string* unset transports
528 shadow_transport string unset transports
529 size_addition integer 1024 smtp 1.91
530 skip_syntax_errors boolean false redirect 4.00
531 smtp_accept_keepalive boolean true main
532 smtp_accept_max integer 20 main
533 smtp_accept_max_nonmail integer 10 main 4.11
534 smtp_accept_max_nonmail_hosts host list * main 4.14
535 smtp_accept_max_per_connection integer 1000 main 4.00
536 smtp_accept_max_per_host integer 0 main 2.05
537 smtp_accept_queue integer 0 main
538 smtp_accept_queue_per_connection integer 10 main 2.03
539 smtp_accept_reserve integer 0 main
540 smtp_active_hostname string* unset main 4.33
541 smtp_banner string* + main
542 smtp_check_spool_space boolean true main 2.10
543 smtp_connect_backlog integer 5 main
544 smtp_enforce_sync boolean true main 4.00
545 smtp_etrn_command string* unset main 1.92
546 smtp_etrn_serialize boolean true main 1.89
547 smtp_load_reserve fixed-point unset main
548 smtp_max_synprot_errors integer 3 main 4.30
549 smtp_max_unknown_commands integer 3 main 4.14
550 smtp_ratelimit_hosts host list unset main 4.00
551 smtp_ratelimit_mail string unset main 4.00
552 smtp_ratelimit_rcpt string unset main 4.00
553 smtp_receive_timeout time 5m main
554 smtp_reserve_hosts host list unset main
555 smtp_return_error_details boolean false main 4.11
556 socket string* unset lmtp 4.11
557 spamd_address string* + main 4.50 with content scan
558 split_spool_directory boolean false main 1.70
559 spool_directory string ++ main
560 spool_wireformat boolean false main 4.90
561 sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
562 sqlite_lock_timeout time 5s main 4.53
563 strict_acl_vars boolean false main 4.64
564 srv_fail_domains domain list unset dnslookup 4.43
565 strip_excess_angle_brackets boolean false main
566 strip_trailing_dot boolean false main
567 subject string* unset autoreply
568 syntax_errors_text string* unset redirect 4.00
569 syntax_errors_to string unset redirect 4.00
570 syslog_duplication boolean true main 4.21
571 syslog_facility string unset main 4.20
572 syslog_processname string "exim" main 4.20
573 syslog_timestamp boolean true main 4.00
574 system_filter string unset main 4.00 replacing message_filter
575 system_filter_directory_transport string unset main 4.00 replacing message_filter
576 system_filter_file_transport string unset main 4.00 replacing message_filter
577 system_filter_group string unset main 4.00 replacing message_filter
578 system_filter_pipe_transport string unset main 4.00 replacing message_filter
579 system_filter_reply_transport string unset main 4.00 replacing message_filter
580 system_filter_user string unset main 4.00 replacing message_filter
581 tcp_nodelay boolean true main 4.23
583 tcp_wrappers_daemon_name string* ++ main 4.73
584 temp_errors string list + pipe 1.95
585 text string* unset autoreply
586 timeout time 5m lmtp 3.20
590 timeout_defer boolean false pipe 4.51
591 timeout_frozen_after time 0s main 3.20
592 timezone string + main 3.15
593 tls_advertise_hosts host list * main 3.20
594 tls_advertise_requiretls host list * main 4.92 if experimental_requiretls
595 tls_certificate string* unset main 3.20
597 tls_dh_max_bits integer 2236 main 4.80
598 tls_dh_min_bits integer 1024 smtp 4.82
599 tls_dhparam string* unset main 3.20
600 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
601 tls_on_connect_ports string unset main 4.43
602 tls_privatekey string* unset main 3.20
604 tls_remember_emstp boolean false main 4.21
605 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
606 string* unset main 4.33
607 tls_resumption_hosts host list* unset main 4.95
608 host list* unset smtp 4.95
609 tls_sni string* unset main 4.80
610 tls_tempfail_tryclear boolean true smtp 4.05
611 tls_try_verify_hosts host list unset main 4.00
612 tls_verify_certificates string* unset main 3.20
614 tls_verify_hosts host list unset main 3.20
615 to string* unset autoreply
616 translate_ip_address string unset routers 4.00
617 transport string* unset routers 4.00
618 transport_current_directory string unset routers 4.00
619 transport_home_directory string unset routers 4.00
620 transport_filter string unset transports
621 transport_filter_timeout time 5m transports 4.30
622 trusted_groups string list unset main
623 trusted_users string list unset main
624 umask octal-integer 022 pipe
625 unknown_login string unset main
626 unknown_username string unset main
627 unseen boolean false routers 4.00
628 untrusted_set_sender boolean false main 3.20
629 use_bsmtp boolean false appendfile 4.00
631 use_crlf boolean false appendfile 1.89
633 use_fcntl_lock boolean + appendfile 1.70
634 use_flock_lock boolean + appendfile 4.11
635 use_lockfile boolean + appendfile
636 use_mbx_lock boolean + appendfile 2.10
637 use_shell boolean false pipe 1.70
638 user string + routers 4.00
639 unset transports 4.00 replaces individual options
640 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
641 uucp_from_pattern string + main 1.75
642 uucp_from_sender string* "$1" main 1.75
643 verify boolean true routers 4.00
644 verify_only boolean false routers 4.00
645 verify_recipient boolean true routers 4.00
646 verify_sender boolean true routers 4.00
647 warn_message_file string* unset main 4.00 expanded from 4.94
648 widen_domains string list unset dnslookup 4.00
649 write_rejectlog boolean true main 4.31
653 2. COMMAND LINE OPTIONS
654 -----------------------
656 The table below contains a complete list of all Exim's command line options.
657 Those marked with # are available only to trusted users, those marked with +
658 are available only to admin users, and those marked with * exist only to
659 provide compatibility with Sendmail.
662 --help Give a little help (not a lot)
663 --version Give version information (alias for -bV)
666 -bdf + Start daemon and run it in the foreground
667 -be Test string expansion
668 -bem Test string expansion, read test message first
669 -bF Test system filter file
670 -bf Test user filter file
671 -bfd Set domain for filter testing
672 -bfl Set local part for filter testing
673 -bfp Set local part prefix for filter testing
674 -bfs Set local part suffix for filter testing
675 -bh Test incoming SMTP call, omitting callouts
676 -bhc Test incoming SMTP call, with callouts
677 -bi * Run <command>bi_command</command>
678 -bI:help Show list of accepted -bI:<tag> options
679 -bm Accept message on standard input
680 -bmalware + Invoke configured malware scanning against supplied filename
681 -bnq Don't qualify addresses in locally submitted messages
682 -bP Show configuration option settings
684 -bpa + ... with generated addresses as well
685 -bpc + ... but just show a count of messages
686 -bpr + ... do not sort
687 -bpra + ... with generated addresses, unsorted
688 -bpru + ... only undelivered addresses, unsorted
689 -bpu + ... only undelivered addresses
690 -brt Test retry rules
691 -brw Test rewriting rules
692 -bS Read batch SMTP on standard input
693 -bs Run SMTP on standard input and output
694 -bt Test address directing and routing
695 -bV Verify version number
696 -bv Test recipient address verification
697 -bvs Test sender address verification
698 -bw + Inetd wait mode
699 -C + Use alternate configuration file
700 -D + Define macro for configuration file
701 -d + Turn on debugging output
702 -dd + Ditto, but if a daemon, not for subprocesses
703 -dropcr Remove CR character in input: became a no-op in 4.21
705 -ex * Synonym for -oex (for several different x)
706 -F Set calling user name
707 -f # Set calling user address
710 -i Dot does not terminate message
711 -M + Force deliver specific message
712 -Mar + Add recipient to message
713 -MC Internal use only
714 -MCA Internal use only
715 -MCP Internal use only
716 -MCQ Internal use only
717 -MCS Internal use only
718 -MCT Internal use only
719 -Mc + Deliver specific message
720 -Mes + Edit message sender
721 -Mf + Freeze message(s)
722 -Mg + Give up (bounce) message(s)
723 -Mmad + Mark all recipients delivered
724 -Mmd + Mark one recipient delivered
725 -Mrm + Remove message(s) (no bounce)
726 -Mset + Load message's variables when testing with -be
727 -Mt + Thaw message(s)
728 -Mvb + View message body
729 -Mvc + View entire message in RFC 2822 format
730 -Mvh + View message header
731 -Mvl + View message log
733 -N + Deliver without transporting
736 -oA * Supply argument for <option>-bi</option>
737 -oB Set max messages down one connection
738 -odb Background delivery
739 -odf Foreground delivery
740 -odi Foreground delivery
741 -odq Queue message; do not deliver
742 -odqs ... do not do SMTP deliveries
743 -oee Error sent by mail; zero return code
744 -oem Error sent by mail; non-zero return code
745 -oep Error written to standard error stream
746 -oeq * Error written to standard error stream
747 -oew * Error sent by mail; non-zero return code
748 -oi Dot does not terminate message
749 -oitrue * Dot does not terminate message
750 -oMa # Supply host address
751 -oMaa # Supply authenticator name
752 -oMai # Supply authenticated id
753 -oMas # Supply authenticated sender
754 -oMi # Supply interface address
755 -oMm # Supply message reference
756 -oMr # Supply protocol name
757 -oMs # Supply host name
758 -oMt # Supply ident string
761 -oP * Specify path for daemon's pid file
762 -or Timeout non-SMTP messages
763 -os Timeout for SMTP messages
764 -ov * Verbose; same as -v
765 -oX Alternative port for daemon
766 -pd Delay Perl interpreter start
767 -ps Do not delay Perl interpreter start
768 -p<r>:<s> * Same as -oMr <r> -oMs <s>
770 -qf + ... force delivery ) Other combinations are
771 -qff + ... and include frozen messages ) possible. The syntax is
772 -qi + ... initial deliveries only )
773 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
774 -qq + Two-stage queue run )
777 -R Select by recipient in queue run
779 -Rff ... and frozen messages
780 -Rr ... using regular expression
781 -Rrf ... with forcing
782 -Rrff ... and frozen messages
784 -S Select by sender in queue run
786 -Sff ... and frozen messages
787 -Sr ... using regular expression
788 -Srf ... with forcing
789 -Srff ... and frozen messages
790 -Tqt * Used by Exim test suite; not recognized in normal use
791 -t Take recipients from header lines
793 -tls-on-connect Do TLS on startup (for legacy clients)
795 -v Verbose - shows SMTP dialogue and other delivery info
796 -x Ignored (AIX compatibility)
799 3. BUILD TIME OPTIONS FOR EXIM
800 ------------------------------
802 The table below contains a "mostly" complete list of options that can be
803 set in Local/Makefile when building Exim. The only items not included are
804 those whose names can be trivially derived from rules stated below.
806 More information about individual options can be found in src/EDITME and
809 The second column below gives the type of option:
811 . `system' means the option is concerned with the operating system;
813 . `driver' means the option selects a driver to be included in the binary;
815 . `lookup' means the option selects a lookuptype to be included in the binary;
817 . `mandatory' means the option is required to be supplied;
819 . `recommended' means the option is recommended to be supplied;
821 . `optional' means what it says;
823 Those marked with * are specialized and are unlikely to be required in most
824 installations. Those that are marked with ** are commonly set in OS-specific
825 Makefiles. If you use any of these in your Local/Makefile, you may need to
826 reproduce some of the OS-specific settings. For example, in the Makefile for
827 Solaris (which is actually called OS/Makefile-SunOS5), there is
829 LIBS=-lsocket -lnsl -lkstat
831 If you use LIBS to add extra libraries, you must also include the OS ones in
832 your setting. It is better, in this particular case, to use EXTRALIBS, which is
833 empty by default, and is provided for just this reason. Of course, if you do
834 actually want to modify a setting from the OS-specific file, there is nothing
835 to stop you overriding it in your Local/Makefile.
837 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
838 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
839 libraries specific only to that module. These rules are only used where the
840 relevant lookup is a module. These options are not explicitly listed below.
842 Variables with names endined `_PC' are used for pkg-config integration; setting
843 the value to the name of a pkg-config package will cause Exim's build system to
844 query the --cflags and --libs for the given name, when building anything
845 dependent upon the component associated with the `_PC' variable. For lookups,
846 if the lookup is dynamically loaded, then this *replaces* the use of the
847 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
848 is statically loaded into Exim, the results will be inserted into the
849 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
850 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
851 only listed below for the TLS implementation cases.
854 Option Type Description
855 ------------------------------------------------------------------------------
857 ALT_CONFIG_PREFIX optional restricts location of -C files
858 APPENDFILE_MODE optional*
859 APPENDFILE_DIRECTORY_MODE optional*
860 APPENDFILE_LOCKFILE_MODE optional*
861 AR system command to build a library
862 AUTH_CRAM_MD5 driver include cram_md5 authenticator
863 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
864 AUTH_GSASL driver include GNU SASL authenticator
865 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
866 AUTH_LIBS system library linkage for authenticators
867 AUTH_PLAINTEXT driver include plaintext authenticator
868 AUTH_SPA driver include SPA (NTLM) authenticator
869 AUTH_VARS=3 optional* number of $auth variables
870 BASENAME_COMMAND system** path to basename
871 BASE_62=62 optional* not normally changed for Unix
872 BIN_DIRECTORY mandatory Exim binary directory
873 CC system** C compiler
874 CFLAGS system** flags for C compiler
875 CFLAGS_DYNAMIC system** extra flags needed for .so modules
876 CHGRP_COMMAND system** path to chgrp
877 CHOWN_COMMAND system** path to chown
878 COMPRESS_COMMAND system path to a compress command
879 COMPRESS_SUFFIX system suffix added to compressed files
880 CONFIGURE_FILE mandatory Exim runtime configuration file
881 CONFIGURE_FILE_USE_EUID optional*
882 CONFIGURE_FILE_USE_NODE optional*
883 CONFIGURE_GROUP optional* alternate group for configuration file
884 CONFIGURE_OWNER optional* alternate owner for configuration file
885 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
886 DBMLIB optional** location of DBM library
887 DB_DIRECTORY_MODE optional* mode for hints directory
888 DB_LOCKFILE_MODE optional* mode for hints lock files
889 DB_LOCK_TIMEOUT optional* timeout for hints lock files
890 DB_MODE optional* mode for hints files
891 DEFAULT_CRYPT optional default crypt() function
892 DELIVER_IN_BUFFER_SIZE optional*
893 DELIVER_OUT_BUFFER_SIZE optional*
894 DISABLE_DKIM optional disables DKIM support
895 DISABLE_DNSSEC optional disables attempts to use DNSSEC
896 DISABLE_D_OPTION optional disables -D option
897 ERRNO_QUOTA optional* error code for system quota failures
898 EXICYCLOG_MAX optional number of old log files to keep
899 EXIMDB_DIRECTORY_MODE optional* for hints database directory
900 EXIMDB_LOCKFILE_MODE optional* for hints lock files
901 EXIMDB_MODE optional* mode for hints files
902 EXIMON_TEXTPOP system**
904 EXIM_GROUP mandatory group to use for Exim
905 EXIM_MONITOR optional set to eximon.bin to compile
907 EXIM_USER mandatory user to use for Exim
908 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
909 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
910 EXIWHAT_MULTIKILL_CMD system**
911 EXIWHAT_MULTIKILL_ARG system**
912 EXIWHAT_PS_ARG system** to list all processes
913 EXIWHAT_PS_CMD system** path to ps command
914 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
915 EXTRALIBS system additional libraries
916 EXTRALIBS_EXIM system additional libraries for Exim only
917 EXTRALIBS_EXIMON system additional libraries for the monitor
918 FIXED_NEVER_USERS optional can't override at runtime
919 HAVE_ICONV system the iconv() function is available
920 HAVE_IPV6 system include IPv6 support
921 HEADERS_CHARSET optional charset for decoded header lines
922 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
923 HEADER_MAXSIZE optional* max memory for message header
924 HOSTNAME_COMMAND system** path to hostname command
925 INCLUDE system path to include files
926 INFO_DIRECTORY optional directory for Info documentation
927 INPUT_DIRECTORY_MODE optional mode for input directory
928 IPV6_INCLUDE system additional includes for IPv6
929 IPV6_LIBS system additional libraries for IPv6
930 LDAP_LIB_TYPE optional type of LDAP library
931 LFLAGS system** link editor flags
932 LIBIDENTCFLAGS system C flags when compiling libident
933 LIBIDENTNAME system name for libident library
934 LIBRESOLV system** library for DNS resolver
935 LIBS system** additional libraries
936 LIBS_EXIM system** additional libraries for Exim ony
937 LIBS_EXIMON system** additional libraries for monitor
938 LOCAL_SCAN_SOURCE optional location of local_scan() source
939 LOG_DIRECTORY_MODE optional mode for log directory
940 LOG_FILE_PATH optional path to log files
941 LOG_MODE optional mode for log files
942 LOOKUP_CDB lookup include cdb lookup
943 LOOKUP_DBM lookup include dbm lookup
944 LOOKUP_DNSDB lookup include dnsdb lookup
945 LOOKUP_DSEARCH lookup include dsearch lookup
946 LOOKUP_INCLUDE lookup include files for lookups
947 LOOKUP_LDAP lookup include ldap lookup
948 LOOKUP_LIBS lookup include libraries for lookups
949 LOOKUP_LSEARCH lookup include all lsearch lookups
950 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
951 LOOKUP_MYSQL lookup include mysql lookup
952 LOOKUP_NIS lookup include nis lookup
953 LOOKUP_NISPLUS lookup include nisplus lookup
954 LOOKUP_ORACLE lookup include oracle lookup
955 LOOKUP_PGSQL lookup include pgsql lookup
956 LOOKUP_TESTDB lookup*
957 LOOKUP_WHOSON lookup include whoson lookup
958 LOOKUP_*_INCLUDE optional* include files for dynamic module
959 LOOKUP_*_LIBS optional* libraries for dynamic module
960 MAKE_SHELL optional* shell to use for make
961 MAX_FILTER_SIZE optional* max file size for filter files
962 MAX_INCLUDE_SIZE optional* max file size for :include: files
963 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
964 MAX_NAMED_LIST optional* max named lists of a given type
965 MAX_INTERFACES system maximum network interfaces
966 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
967 MV_COMMAND system path to mv command
968 NO_SYMLINK optional install doesn't make 'exim" symlink
969 PCRE_CONFIG system* use pcre-config for PCRE support
970 PCRE_LIBS system* library for using PCRE
971 PERL_CC system* compiler for Perl interface code
972 PERL_CCOPTS system* flags for same
973 PERL_COMMAND system path to Perl
974 PERL_LIBS system* library for compiling Perl interface
975 PID_FILE_PATH optional path to daemon's pid file
976 RADIUS_CONFIG_FILE optional path to Radius config file
977 RADIUS_LIB_TYPE optional type of RADIUS library
978 RANLIB system** path to ranlib command
979 RM_COMMAND system path to rm command
980 ROUTER_ACCEPT driver include accept router
981 ROUTER_DNSLOOKUP driver include dnslookup router
982 ROUTER_MANUALROUTE driver include manualroute router
983 ROUTER_IPLITERAL driver include ipliteral router
984 ROUTER_IPLOOKUP driver include iplookup router
985 ROUTER_REDIRECT driver include redirect router
986 ROUTER_QUERYPROGRAM driver include queryprogram router
987 SPOOL_DIRECTORY recommended path to spool directory
988 SPOOL_DIRECTORY_MODE optional mode of spool directory
989 SPOOL_MODE optional mode of spool files
990 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
991 STRIP_COMMAND optional* can be used to strp binaries
992 SUPPORT_A6 optional* support A6 DNS records
993 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
994 SUPPORT_MAILDIR optional support for maildir delivery
995 SUPPORT_MAILSTORE optional support for mailstore delivery
996 SUPPORT_MBX optional support for MBX delivery
997 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
998 SUPPORT_PAM optional support for PAM authentication
999 SUPPORT_TLS optional support for TLS encryption over SMTP
1000 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
1001 SYSLOG_LOG_PID optional add pid to syslog lines
1002 SYSLOG_LONG_LINES optional do not split long syslog lines
1003 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
1004 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
1005 TIMEZONE_DEFAULT optional default for timezone option
1006 TLS_INCLUDE optional path to include files for TLS
1007 TLS_LIBS optional additional libraries for TLS
1008 EXIM_TMPDIR system value for TMPDIR environment variable
1009 TRANSPORT_APPENDFILE driver include appendfile transport
1010 TRANSPORT_AUTOREPLY driver include autoreply transport
1011 TRANSPORT_LMTP driver include lmtp transport
1012 TRANSPORT_PIPE driver include pipe transport
1013 TRANSPORT_SMTP driver include smtp transport
1014 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1015 USE_DB system** use native DB interface
1016 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1017 USE_GNUTLS_PC optional probably "gnutls"
1018 USE_OPENSSL_PC optional probably "openssl"
1019 USE_READLINE optional try to load libreadline for -be
1020 USE_TCP_WRAPPERS system link with tcpwrappers
1021 USE_TDB optional use the tdb DB interface
1022 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1023 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1024 X11 system** X11 base directory
1025 X11_LD_LIB system** X11 link library
1026 XINCLUDE system** X11 include directory
1027 XLFLAGS system** X11 link time flags
1028 ZCAT_COMMAND system path to zcat command
1031 4. BUILD TIME OPTIONS FOR EXIMON
1032 --------------------------------
1034 The table below contains a complete list of options that can be set in
1035 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1036 ** it means that the text string is too long to fit in the table and is instead
1037 given below. A blank default means that there is no default value.
1039 ACTION_OUTPUT=no show output for every action
1040 ACTION_QUEUE_UPDATE=yes update queue display after actions
1041 BODY_MAX=20000 maximum body display
1042 DOMAIN= domain to strip from window title
1043 LOG_BUFFER=20K buffer for log tail
1044 LOG_DEPTH=300 depth of log subwindow
1045 LOG_FONT=** font for log display
1046 LOG_STRIPCHARTS=** patterns for stripcharts
1047 LOG_WIDTH=950 width of log subwindow
1048 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1049 MIN_HEIGHT=162 minimum window height
1050 MIN_WIDTH=103 minimum window width
1051 QUALIFY_DOMAIN= local domain to strip from addresses
1052 QUEUE_DEPTH=200 depth of queue subwindow
1053 QUEUE_FONT=$LOG_FONT font for queue display
1054 QUEUE_INTERVAL=300 queue refresh interval
1055 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1056 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1057 QUEUE_WIDTH=950 width of queue subwindow
1058 SIZE_STRIPCHART= request partition size stripchart
1059 SIZE_STRIPCHART_NAME=space name for size stripchart
1060 START_SMALL=no if yes, start with small window
1061 STRIPCHART_INTERVAL=60 stripchart refresh interval
1062 TEXT_DEPTH=200 depth of text windows
1063 WINDOW_TITLE="${hostname} eximon" window title
1065 The default for LOG_FONT is
1067 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1069 and the default for LOG_STRIPCHARTS is
1071 LOG_STRIPCHARTS='/ <= /in/
1073 / => .+ R=local/local/
1074 / => .+ T=[^ ]*smtp/smtp/'
1076 That is, there are four stripcharts, named in, out, local, and smtp. The first
1077 counts message arrivals, the second counts all deliveries, the third counts
1078 deliveries where the router's name starts with "local", and the fourth counts
1079 deliveries where the transport name contains "smtp".
1081 **** End of OptionLists ****
git://git.exim.org / exim.git / blob