###############################################################################
#use strict;
-require Cwd;
use Errno;
use FileHandle;
use Socket;
use Time::Local;
+use Cwd;
+use File::Basename;
+use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
# Start by initializing some global variables
# This gets embedded in the D-H params filename, and the value comes
# from asking GnuTLS for "normal", but there appears to be no way to
# use certtool/... to ask what that value currently is. *sigh*
-# This value is correct as of GnuTLS 2.12.18.
-#
-$gnutls_dh_bits_normal = 2432;
+# We also clamp it because of NSS interop, see addition of tls_dh_max_bits.
+# This value is correct as of GnuTLS 2.12.18 as clamped by tls_dh_max_bits.
+# normal = 2432 tls_dh_max_bits = 2236
+$gnutls_dh_bits_normal = 2236;
$cf = "bin/cf -exact";
$cr = "\r";
$debug = 0;
+$force_continue = 0;
$force_update = 0;
+$log_failed_filename = "failed-summary.log";
$more = "less -XF";
$optargs = "";
$save_output = 0;
$server_opts = "";
+$flavour = 'FOO';
$have_ipv4 = 1;
$have_ipv6 = 1;
$parm_port_d3 = 1227; # Additional for daemon
$parm_port_d4 = 1228; # Additional for daemon
+# Manually set locale
+$ENV{'LC_ALL'} = 'C';
+
+# In some environments USER does not exists, but we
+# need it for some test(s)
+$ENV{USER} = getpwuid($>)
+ if not exists $ENV{USER};
###############################################################################
{
$pid = $TEST_STATE->{exim_pid};
print "Tidyup: killing wait-mode daemon pid=$pid\n";
- system("sudo kill -SIGINT $pid");
+ system("sudo kill -INT $pid");
}
if (opendir(DIR, "spool"))
chomp($pid = <PID>);
close(PID);
print "Tidyup: killing daemon pid=$pid\n";
- system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
+ system("sudo rm -f spool/$spool; sudo kill -INT $pid");
}
}
else
system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
if ($rc == 0 && !$save_output);
-system("sudo /bin/rm -rf ./eximdir/*");
+system("sudo /bin/rm -rf ./eximdir/*")
+ if (!$save_output);
print "\nYou were in test $test at the end there.\n\n" if defined $test;
exit $rc if ($rc >= 0);
sub munge {
my($file) = $_[0];
+my($extra) = $_[1];
my($yield) = 0;
my(@saved) = ();
+local $_;
+
open(IN, "$file") || tests_exit(-1, "Failed to open $file: $!");
my($is_log) = $file =~ /log/;
while(<IN>)
{
RESET_AFTER_EXTRA_LINE_READ:
+ # Custom munges
+ if ($extra)
+ {
+ next if $extra =~ m%^/% && eval $extra;
+ eval $extra if $extra =~ m/^s/;
+ }
+
# Check for "*** truncated ***"
$yield = 1 if /\*\*\* truncated \*\*\*/;
# But convert "name=the.local.host address=127.0.0.1" to use "localhost"
s/name=the\.local\.host address=127\.0\.0\.1/name=localhost address=127.0.0.1/g;
+ # The name of the shell may vary
+ s/\s\Q$parm_shell\E\b/ ENV_SHELL/;
+
# Replace the path to the testsuite directory
s?\Q$parm_cwd\E?TESTSUITE?g;
# The message for a non-listening FIFO varies
s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
- # The name of the shell may vary
- s/\s\Q$parm_shell\E\b/ SHELL/;
-
# Debugging output of lists of hosts may have different sort keys
s/sort=\S+/sort=xx/ if /^\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\S+/;
# Random local part in callout cache testing
s/myhost.test.ex-\d+-testing/myhost.test.ex-dddddddd-testing/;
+ s/the.local.host.name-\d+-testing/the.local.host.name-dddddddd-testing/;
# File descriptor numbers may vary
s/^writing data block fd=\d+/writing data block fd=dddd/;
s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
# Time on queue tolerance
- s/QT=1s/QT=0s/;
+ s/(QT|D)=1s/$1=0s/;
# Eximstats heading
s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
+ # Treat ECONNRESET the same as ECONNREFUSED. At least some systems give
+ # us the former on a new connection.
+ s/(could not connect to .*: Connection) reset by peer$/$1 refused/;
# ======== TLS certificate algorithms ========
# Test machines might have various different TLS library versions supporting
# different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
# treat the standard algorithms the same.
# So far, have seen:
+ # TLSv1:AES128-GCM-SHA256:128
# TLSv1:AES256-SHA:256
+ # TLSv1.1:AES256-SHA:256
# TLSv1.2:AES256-GCM-SHA384:256
+ # TLSv1.2:DHE-RSA-AES256-SHA:256
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
# We also need to handle the ciphersuite without the TLS part present, for
# client-ssl's output. We also see some older forced ciphersuites, but
# Mail headers (...), log-lines X=..., client-ssl output ...
# (and \b doesn't match between ' ' and '(' )
- s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.2:/$1TLSv1:/xg;
+ s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
+ s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
+ s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
+ s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
# GnuTLS have seen:
+ # TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
+ # TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
# TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
#
# X=TLS1.1:RSA_AES_256_CBC_SHA1:256
# X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
# and as stand-alone cipher:
+ # ECDHE-RSA-AES256-SHA
# DHE-RSA-AES256-SHA256
# DHE-RSA-AES256-SHA
# picking latter as canonical simply because regex easier that way.
s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
- s/TLS1.[012]:(DHE_)?RSA_AES_256_CBC_SHA(1|256):256/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
- s/\bDHE-RSA-AES256-SHA256\b/DHE-RSA-AES256-SHA/g;
+ s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
+ s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+
+ # GnuTLS library error message changes
+ s/No certificate was found/The peer did not send any certificate/g;
+#(dodgy test?) s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
+ s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+
+ # (this new one is a generic channel-read error, but the testsuite
+ # only hits it in one place)
+ s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
+
+ # (replace old with new, hoping that old only happens in one situation)
+ s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+ s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
+
+ # signature algorithm names
+ s/RSA-SHA1/RSA-SHA/;
# ======== Caller's login, uid, gid, home, gecos ========
s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
- s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+ s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;
# When looking at spool files with -Mvh, we will find not only the caller
# login, but also the uid and gid. It seems that $) in some Perls gives all
# ======== Other error numbers ========
s/errno=\d+/errno=dd/g;
+ # ======== System Error Messages ======
+ # depending on the underlaying file system the error message seems to differ
+ s/(?: is not a regular file)|(?: has too many links \(\d+\))/ not a regular file or too many links/;
# ======== Output from ls ========
# Different operating systems use different spacing on long output
s/this message = \d+\b/this message = sss/;
s/Size of headers = \d+/Size of headers = sss/;
s/sum=(?!0)\d+/sum=dddd/;
- s/(?<=sum=dddd )count=(?!0)\d+\b/count=dd/;
- s/(?<=sum=0 )count=(?!0)\d+\b/count=dd/;
+ s/(?<=sum=dddd )count=\d+\b/count=dd/;
+ s/(?<=sum=0 )count=\d+\b/count=dd/;
s/,S is \d+\b/,S is ddddd/;
s/\+0100,\d+;/+0100,ddd;/;
s/\(\d+ bytes written\)/(ddd bytes written)/;
# numbers, or handle specific bad conditions in different ways, leading to
# different wording in the error messages, so we cannot compare them.
- s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
-
+ s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+ next if /SSL verify error: depth=0 error=certificate not trusted/;
# ======== Maildir things ========
# timestamp output in maildir processing
# other output is fragile; perhaps the debug output should be revised instead.
s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+ # ==========================================================
+ # MIME boundaries in RFC3461 DSN messages
+ s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+
# ==========================================================
# Some munging is specific to the specific file types
next;
}
}
+
+ # openssl version variances
+ next if /^SSL info: unknown state/;
+ next if /^SSL info: SSLv2\/v3 write client hello A/;
+ next if /^SSL info: SSLv3 read server key exchange A/;
+ next if /SSL verify error: depth=0 error=certificate not trusted/;
+ s/SSL3_READ_BYTES/ssl3_read_bytes/;
+
+ # gnutls version variances
+ next if /^Error in the pull function./;
}
# ======== stderr ========
# IP address lookups use gethostbyname() when IPv6 is not supported,
# and gethostbyname2() or getipnodebyname() when it is.
- s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
+ s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
# drop gnutls version strings
next if /GnuTLS compile-time version: \d+[\.\d]+$/;
# As of Exim 4.74, we log when a setgid fails; because we invoke Exim
# with -be, privileges will have been dropped, so this will always
# be the case
- next if /^changing group to \d+ failed: Operation not permitted/;
+ next if /^changing group to \d+ failed: (Operation not permitted|Not owner)/;
+
+ # We might not keep this check; rather than change all the tests, just
+ # ignore it as long as it succeeds; then we only need to change the
+ # TLS tests where tls_require_ciphers has been set.
+ if (m{^changed uid/gid: calling tls_validate_require_cipher}) {
+ my $discard = <IN>;
+ next;
+ }
+ next if /^tls_validate_require_cipher child \d+ ended: status=0x0/;
# We invoke Exim with -D, so we hit this new messag as of Exim 4.73:
next if /^macros_trusted overridden to true by whitelisting/;
# are unset, because tls ain't always there.
next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
- \sno\s\(option\sunset\)/x;
+ \sno\s\((option\sunset|end\sof\slist)\)/x;
# Skip auxiliary group lists because they will vary.
@saved = ();
}
+ # remote port numbers vary
+ s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
+
+ # Skip hosts_require_dane checks when the options
+ # are unset, because dane ain't always there.
+
+ next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+
+ # SUPPORT_PROXY
+ next if /host in hosts_proxy\?/;
+
+ # Experimental_International
+ next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
+
# Skip some lines that Exim puts out at the start of debugging output
# because they will be different in different binaries.
/^Fixed never_users:/ ||
/^Size of off_t:/
);
+
+
}
next;
}
+ # ======== log ========
+
+ elsif ($is_log)
+ {
+ # Berkeley DB version differences
+ next if / Berkeley DB error: /;
+ }
+
# ======== All files other than stderr ========
print MUNGED;
# Arguments: [0] the prompt string
# [1] if there is a U in the prompt and $force_update is true
-# Returns: nothing (it sets $_)
+# [2] if there is a C in the prompt and $force_continue is true
+# Returns: returns the answer
sub interact{
print $_[0];
if ($_[1]) { $_ = "u"; print "... update forced\n"; }
+ elsif ($_[2]) { $_ = "c"; print "... continue forced\n"; }
else { $_ = <T>; }
}
+##################################################
+# Subroutine to log in force_continue mode #
+##################################################
+
+# In force_continue mode, we just want a terse output to a statically
+# named logfile. If multiple files in same batch (stdout, stderr, etc)
+# all have mismatches, it will log multiple times.
+#
+# Arguments: [0] the logfile to append to
+# [1] the testno that failed
+# Returns: nothing
+
+
+
+sub log_failure {
+ my $logfile = shift();
+ my $testno = shift();
+ my $detail = shift() || '';
+ if ( open(my $fh, ">>", $logfile) ) {
+ print $fh "Test $testno $detail failed\n";
+ close $fh;
+ }
+}
+
+
##################################################
# Subroutine to compare one output file #
# [2] where to put the munged copy
# [3] the name of the saved file
# [4] TRUE if this is a log file whose deliveries must be sorted
+# [5] optionally, a custom munge command
#
# Returns: 0 comparison succeeded or differences to be ignored
# 1 comparison failed; files may have been updated (=> re-compare)
# Does not return if the user replies "Q" to a prompt.
sub check_file{
-my($rf,$rsf,$mf,$sf,$sortfile) = @_;
+my($rf,$rsf,$mf,$sf,$sortfile,$extra) = @_;
# If there is no saved file, the raw files must either not exist, or be
# empty. The test ! -s is TRUE if the file does not exist or is empty.
-if (! -e $sf)
+# we check if there is a flavour specific file, but we remember
+# the original file name as "generic"
+$sf_generic = $sf;
+$sf_flavour = "$sf_generic.$flavour";
+$sf_current = -e $sf_flavour ? $sf_flavour : $sf_generic;
+
+if (! -e $sf_current)
{
return 0 if (! -s $rf && (! defined $rsf || ! -s $rsf));
for (;;)
{
print "Continue, Show, or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
last if (/^s$/);
}
print "\n";
for (;;)
{
- interact("Continue, Update & retry, Quit? [Q] ", $force_update);
+ interact("Continue, Update & retry, Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $rsf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
last if (/^u$/i);
}
}
+#### $_
+
# Control reaches here if either (a) there is a saved file ($sf), or (b) there
# was a request to create a saved file. First, create the munged file from any
# data that does exist.
open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
-my($truncated) = munge($rf) if -e $rf;
+my($truncated) = munge($rf, $extra) if -e $rf;
if (defined $rsf && -e $rsf)
{
print MUNGED "\n******** SERVER ********\n";
- $truncated |= munge($rsf);
+ $truncated |= munge($rsf, $extra);
}
close(MUNGED);
# a result of parallel deliveries. We load the munged file and sort sequences
# of delivery lines.
-if (-e $sf)
+if (-e $sf_current)
{
# Deal with truncated text items
open(MUNGED, "$mf") || tests_exit(-1, "Failed to open $mf: $!");
@munged = <MUNGED>;
close(MUNGED);
- open(SAVED, "$sf") || tests_exit(-1, "Failed to open $sf: $!");
+ open(SAVED, $sf_current) || tests_exit(-1, "Failed to open $sf_current: $!");
@saved = <SAVED>;
close(SAVED);
# Do the comparison
- return 0 if (system("$cf '$mf' '$sf' >test-cf") == 0);
+ return 0 if (system("$cf '$mf' '$sf_current' >test-cf") == 0);
# Handle comparison failure
- print "** Comparison of $mf with $sf failed";
+ print "** Comparison of $mf with $sf_current failed";
system("$more test-cf");
print "\n";
for (;;)
{
- interact("Continue, Retry, Update & retry, Quit? [Q] ", $force_update);
+ interact("Continue, Retry, Update current"
+ . ($sf_current ne $sf_flavour ? "/Save for flavour '$flavour'" : "")
+ . " & retry, Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $sf_current) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
return 1 if /^r$/i;
- last if (/^u$/i);
+ last if (/^[us]$/i);
}
}
# Update or delete the saved file, and give the appropriate return code.
if (-s $mf)
- { tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0; }
+ {
+ my $sf = /^u/i ? $sf_current : $sf_flavour;
+ tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0;
+ }
else
- { tests_exit(-1, "Failed to unlink $sf") if !unlink($sf); }
+ {
+ # if we deal with a flavour file, we can't delete it, because next time the generic
+ # file would be used again
+ if ($sf_current eq $sf_flavour) {
+ open(FOO, ">$sf_current");
+ close(FOO);
+ }
+ else {
+ tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
+ }
+ }
return 1;
}
+##################################################
+# Custom munges
+# keyed by name of munge; value is a ref to a hash
+# which is keyed by file, value a string to look for.
+# Usable files are:
+# paniclog, rejectlog, mainlog, stdout, stderr, msglog, mail
+# Search strings starting with 's' do substitutions;
+# with '/' do line-skips.
+# Triggered by a scriptfile line "munge <name>"
+##################################################
+$munges =
+ { 'dnssec' =>
+ { 'stderr' => '/^Reverse DNS security status: unverified\n/' },
+
+ 'gnutls_unexpected' =>
+ { 'mainlog' => '/\(recv\): A TLS packet with unexpected length was received./' },
+
+ 'gnutls_handshake' =>
+ { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
+
+ 'optional_events' =>
+ { 'stdout' => '/event_action =/' },
+
+ 'optional_ocsp' =>
+ { 'stderr' => '/127.0.0.1 in hosts_requ(ire|est)_ocsp/' },
+
+ 'optional_cert_hostnames' =>
+ { 'stderr' => '/in tls_verify_cert_hostnames\? no/' },
+
+ 'loopback' =>
+ { 'stdout' => 's/[[](127\.0\.0\.1|::1)]/[IP_LOOPBACK_ADDR]/' },
+
+ 'scanfile_size' =>
+ { 'stdout' => 's/(Content-length:) \d\d\d/$1 ddd/' },
+
+ 'delay_1500' =>
+ { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
+
+ 'tls_anycipher' =>
+ { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+
+ 'debug_pid' =>
+ { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
+
+ 'optional_dsn_info' =>
+ { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
+ },
+
+ 'sys_bindir' =>
+ { 'mainlog' => 's%/(usr/)?bin/%SYSBINDIR/%' },
+
+ };
+
+
##################################################
# Subroutine to check the output of a test #
##################################################
# This function is called when the series of subtests is complete. It makes
-# use of check() file, whose arguments are:
+# use of check_file(), whose arguments are:
#
# [0] the name of the main raw output file
# [1] the name of the server raw output file or undef
# [2] where to put the munged copy
# [3] the name of the saved file
# [4] TRUE if this is a log file whose deliveries must be sorted
+# [5] an optional custom munge command
#
-# Arguments: none
+# Arguments: Optionally, name of a single custom munge to run.
# Returns: 0 if the output compared equal
# 1 if re-run needed (files may have been updated)
sub check_output{
+my($mungename) = $_[0];
my($yield) = 0;
+my($munge) = $munges->{$mungename} if defined $mungename;
$yield = 1 if check_file("spool/log/paniclog",
"spool/log/serverpaniclog",
"test-paniclog-munged",
- "paniclog/$testno", 0);
+ "paniclog/$testno", 0,
+ $munge->{'paniclog'});
$yield = 1 if check_file("spool/log/rejectlog",
"spool/log/serverrejectlog",
"test-rejectlog-munged",
- "rejectlog/$testno", 0);
+ "rejectlog/$testno", 0,
+ $munge->{'rejectlog'});
$yield = 1 if check_file("spool/log/mainlog",
"spool/log/servermainlog",
"test-mainlog-munged",
- "log/$testno", $sortlog);
+ "log/$testno", $sortlog,
+ $munge->{'mainlog'});
if (!$stdout_skip)
{
$yield = 1 if check_file("test-stdout",
"test-stdout-server",
"test-stdout-munged",
- "stdout/$testno", 0);
+ "stdout/$testno", 0,
+ $munge->{'stdout'});
}
if (!$stderr_skip)
$yield = 1 if check_file("test-stderr",
"test-stderr-server",
"test-stderr-munged",
- "stderr/$testno", 0);
+ "stderr/$testno", 0,
+ $munge->{'stderr'});
}
# Compare any delivered messages, unless this test is skipped.
print ">> COMPARE $mail mail/$testno.$saved_mail\n" if $debug;
$yield = 1 if check_file($mail, undef, "test-mail-munged",
- "mail/$testno.$saved_mail", 0);
+ "mail/$testno.$saved_mail", 0,
+ $munge->{'mail'});
delete $expected_mails{"mail/$testno.$saved_mail"};
}
for (;;)
{
- interact("Continue, Update & retry, or Quit? [Q] ", $force_update);
+ interact("Continue, Update & retry, or Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "missing email") if (/^c$/i && $force_continue);
last if /^c$/i;
# For update, we not only have to unlink the file, but we must also
s/((?:[^\W_]{6}-){2}[^\W_]{2})
/new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
$yield = 1 if check_file("spool/msglog/$msglog", undef,
- "test-msglog-munged", "msglog/$testno.$munged_msglog", 0);
+ "test-msglog-munged", "msglog/$testno.$munged_msglog", 0,
+ $munge->{'msglog'});
delete $expected_msglogs{"$testno.$munged_msglog"};
}
}
for (;;)
{
- interact("Continue, Update, or Quit? [Q] ", $force_update);
+ interact("Continue, Update, or Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/i && $force_continue);
last if /^c$/i;
if (/^u$/i)
{
# 4 EOF was encountered after an initial return code line
# Optionally alse a second parameter, a hash-ref, with auxilliary information:
# exim_pid: pid of a run process
+# munge: name of a post-script results munger
sub run_command{
my($testno) = $_[0];
my(@temp);
print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;
open(IN, "./eximdir/exim_dumpdb $parm_cwd/spool $which |");
- @temp = <IN>;
- close(IN);
- if ($which eq "callout")
+ open(OUT, ">>test-stdout");
+ print OUT "+++++++++++++++++++++++++++\n";
+
+ if ($which eq "retry")
{
+ $/ = "\n ";
+ @temp = <IN>;
+ $/ = "\n";
+
@temp = sort {
- my($aa) = substr $a, 21;
- my($bb) = substr $b, 21;
- return $aa cmp $bb;
+ my($aa) = split(' ', $a);
+ my($bb) = split(' ', $b);
+ return $aa cmp $bb;
} @temp;
+
+ foreach $item (@temp)
+ {
+ $item =~ s/^\s*(.*)\n(.*)\n?\s*$/$1\n$2/m;
+ print OUT " $item\n";
+ }
}
- open(OUT, ">>test-stdout");
- print OUT "+++++++++++++++++++++++++++\n";
- print OUT @temp;
+ else
+ {
+ @temp = <IN>;
+ if ($which eq "callout")
+ {
+ @temp = sort {
+ my($aa) = substr $a, 21;
+ my($bb) = substr $b, 21;
+ return $aa cmp $bb;
+ } @temp;
+ }
+ print OUT @temp;
+ }
+
+ close(IN);
close(OUT);
return 1;
}
print ">> killdaemon: recovered pid $pid\n" if $debug;
if ($pid)
{
- run_system("sudo /bin/kill -SIGINT $pid");
+ run_system("sudo /bin/kill -INT $pid");
wait;
}
} else {
$pid = `cat $parm_cwd/spool/exim-daemon.*`;
if ($pid)
{
- run_system("sudo /bin/kill -SIGINT $pid");
+ run_system("sudo /bin/kill -INT $pid");
close DAEMONCMD; # Waits for process
}
}
}
+# The "munge" command selects one of a hardwired set of test-result modifications
+# to be made before result compares are run agains the golden set. This lets
+# us account for test-system dependent things which only affect a few, but known,
+# test-cases.
+# Currently only the last munge takes effect.
+
+if (/^munge\s+(.*)$/)
+ {
+ return (0, { munge => $1 });
+ }
+
+
# The "sleep" command does just that. For sleeps longer than 1 second we
# tell the user what's going on.
if (/^server\s+(.*)$/)
{
- $cmd = "./bin/server $server_opts $1 >>test-stdout-server";
+ $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
+ $cmd = "./bin/server $server_opts -oP $pidfile $1 >>test-stdout-server";
print ">> $cmd\n" if ($debug);
$server_pid = open SERVERCMD, "|$cmd" || tests_exit(-1, "Failed to run $cmd");
SERVERCMD->autoflush(1);
print SERVERCMD "++++\n"; # Send end to server; can't send EOF yet
# because close() waits for the process.
- # This gives the server time to get started; otherwise the next
+ # Interlock the server startup; otherwise the next
# process may not find it there when it expects it.
-
- select(undef, undef, undef, 0.5);
+ while (! stat("$pidfile") ) { select(undef, undef, undef, 0.3); }
return 3;
}
# not drop privilege when -C and -D options are present. To run the exim
# command as root, we use sudo.
-elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
+elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
{
- $args = $5;
+ $args = $6;
my($envset) = (defined $1)? $1 : "";
- my($sudo) = (defined $3)? "sudo " : "";
- my($special)= (defined $4)? $4 : "";
+ my($sudo) = (defined $3)? "sudo " . (defined $4 ? "-u $4 ":"") : "";
+ my($special)= (defined $5)? $5 : "";
$wait_time = (defined $2)? $2 : 0;
# Return 2 rather than 1 afterwards
for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
if ( $args =~ /\$msg\d/ )
{
- tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n");
+ tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
+ unless $force_continue;
}
}
"-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
"-C $parm_cwd/test-config $args " .
">>test-stdout 2>>test-stderr";
-
# If the command is starting an Exim daemon, we run it in the same
# way as the "server" command above, that is, we don't want to wait
# for the process to finish. That happens when "killdaemon" is obeyed later
if ($cmd =~ /\s-DSERVER=server\s/ && $cmd !~ /\s-DNOTDAEMON\s/)
{
+ $pidfile = "$parm_cwd/spool/exim-daemon.pid";
if ($debug) { printf ">> daemon: $cmd\n"; }
run_system("sudo mkdir spool/log 2>/dev/null");
run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
# file is written to the spool directory, in case the Exim binary was
# built with PID_FILE_PATH pointing somewhere else.
- $cmd =~ s!\s-bd\s! -bdf -oP $parm_cwd/spool/exim-daemon.pid !;
+ if ($cmd =~ /\s-oP\s/)
+ {
+ ($pidfile = $cmd) =~ s/^.*-oP ([^ ]+).*$/$1/;
+ $cmd =~ s!\s-bd\s! -bdf !;
+ }
+ else
+ {
+ $pidfile = "$parm_cwd/spool/exim-daemon.pid";
+ $cmd =~ s!\s-bd\s! -bdf -oP $pidfile !;
+ }
print ">> |${cmd}-server\n" if ($debug);
open DAEMONCMD, "|${cmd}-server" || tests_exit(-1, "Failed to run $cmd");
DAEMONCMD->autoflush(1);
while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
- select(undef, undef, undef, 0.3); # Let the daemon get going
+
+ # Interlock with daemon startup
+ while (! stat("$pidfile") ) { select(undef, undef, undef, 0.3); }
return 3; # Don't wait
}
elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
}
}
+# The "background" command is run but not waited-for, like exim -DSERVER=server.
+# One script line is read and fork-exec'd. The PID is stored for a later
+# killdaemon.
+
+elsif (/^background$/)
+ {
+ my $line;
+# $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
+
+ $_ = <SCRIPT>; $lineno++;
+ chomp;
+ $line = $_;
+ if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
+
+ my $pid = fork();
+ if (not defined $pid) { die "** fork failed: $!\n" }
+ if (not $pid) {
+ print "[$$]>> ${line}\n" if ($debug);
+ close(STDIN);
+ open(STDIN, "<", "test-stdout");
+ close(STDOUT);
+ open(STDOUT, ">>", "test-stdout");
+ close(STDERR);
+ open(STDERR, ">>", "test-stderr-server");
+ exec "exec ${line}";
+ exit(1);
+ }
+
+# open(my $fh, ">", $pidfile) ||
+# tests_exit(-1, "Failed to open $pidfile: $!");
+# printf($fh, "%d\n", $pid);
+# close($fh);
+
+ while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
+ select(undef, undef, undef, 0.3); # Let the daemon get going
+ return (3, { exim_pid => $pid }); # Don't wait
+ }
+
+
# Unknown command
autoflush STDOUT 1;
print "Exim tester $testversion\n";
+# extend the PATH with .../sbin
+# we map all (.../bin) to (.../sbin:.../bin)
+$ENV{PATH} = do {
+ my %seen = map { $_, 1 } split /:/, $ENV{PATH};
+ join ':' => map { m{(.*)/bin$}
+ ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_)
+ : ($_) }
+ split /:/, $ENV{PATH};
+};
##################################################
# Some tests check created file modes #
##################################################
# If the first character of the first argument is '/', the argument is taken
-# as the path to the binary.
+# as the path to the binary. If the first argument does not start with a
+# '/' but exists in the file system, it's assumed to be the Exim binary.
-$parm_exim = (@ARGV > 0 && $ARGV[0] =~ m?^/?)? shift @ARGV : "";
+$parm_exim = (@ARGV > 0 && (-x $ARGV[0] or $ARGV[0] =~ m?^/?))? Cwd::abs_path(shift @ARGV) : "";
print "Exim binary is $parm_exim\n" if $parm_exim ne "";
{
if ($arg eq "-DEBUG") { $debug = 1; $cr = "\n"; next; }
if ($arg eq "-DIFF") { $cf = "diff -u"; next; }
+ if ($arg eq "-CONTINUE"){$force_continue = 1;
+ $more = "cat";
+ next; }
if ($arg eq "-UPDATE") { $force_update = 1; next; }
if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
if ($arg eq "-KEEP") { $save_output = 1; next; }
+ if ($arg =~ /^-FLAVOU?R$/) { $flavour = shift; next; }
}
$optargs .= " $arg";
}
# directory. Thus, we should choose the highest version of Exim that has
# been compiled.
- if ($f eq "exim4" || $f eq "exim-snapshot")
+ if ($f eq "exim4" || $f eq "exim-snapshot" || $f eq 'src')
{ $srcdir = $f; }
else
{ $srcdir = $f
# deal with TRUSTED_CONFIG_LIST restrictions
unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
-symlink("$parm_cwd/confs/0000", "$parm_cwd/test-config")
- or die "Unable to link initial config into place: $!\n";
+open (IN, "$parm_cwd/confs/0000") ||
+ tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+open (OUT, ">test-config") ||
+ tests_exit(-1, "Couldn't open test-config: $!\n");
+while (<IN>) { print OUT; }
+close(IN);
+close(OUT);
print("Probing with config file: $parm_cwd/test-config\n");
open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
- "-bP exim_user exim_group|") ||
+ "-bP exim_user exim_group 2>&1|") ||
die "** Cannot run $parm_exim: $!\n";
while(<EXIMINFO>)
{
$parm_eximuser = $1 if /^exim_user = (.*)$/;
$parm_eximgroup = $1 if /^exim_group = (.*)$/;
+ $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
+ print "$_" if /wrong owner/;
}
close(EXIMINFO);
else { $parm_exim_gid = getgrnam($parm_eximgroup); }
}
+# check the permissions on the TRUSTED_CONFIG_LIST
+if (defined $parm_trusted_config_list)
+ {
+ die "TRUSTED_CONFIG_LIST: $parm_trusted_config_list: $!\n"
+ if not -f $parm_trusted_config_list;
+
+ die "TRUSTED_CONFIG_LIST $parm_trusted_config_list must not be world writable!\n"
+ if 02 & (stat _)[2];
+
+ die sprintf "TRUSTED_CONFIG_LIST: $parm_trusted_config_list %d is group writable, but not owned by group '%s' or '%s'.\n",
+ (stat _)[1],
+ scalar(getgrgid 0), scalar(getgrgid $>)
+ if (020 & (stat _)[2]) and not ((stat _)[5] == $> or (stat _)[5] == 0);
+
+ die sprintf "TRUSTED_CONFIG_LIST: $parm_trusted_config_list is not owned by user '%s' or '%s'.\n",
+ scalar(getpwuid 0), scalar(getpwuid $>)
+ if (not (-o _ or (stat _)[4] == 0));
+
+ open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
+ my $test_config = getcwd() . '/test-config';
+ die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
+ if not grep { /^$test_config$/ } <TCL>;
+ }
+else
+ {
+ die "Unable to check the TRUSTED_CONFIG_LIST, seems to be empty?\n";
+ }
+
open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
die "** Cannot run $parm_exim: $!\n";
}
+##################################################
+# Check for redis #
+##################################################
+if (defined $parm_lookups{'redis'})
+ {
+ if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
+ {
+ print "The redis-server command works\n";
+ $parm_running{'redis'} = ' ';
+ }
+ else
+ {
+ print "The redis-server command failed: assume Redis not installed\n";
+ }
+ }
+
##################################################
# Test for the basic requirements #
##################################################
$parm_caller_group = getgrgid($parm_caller_gid);
-print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
+print "Program caller is $parm_caller ($parm_caller_uid), whose group is $parm_caller_group ($parm_caller_gid)\n";
print "Home directory is $parm_caller_home\n";
unless (defined $parm_eximgroup)
$_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
{
$ip = $1;
- next if ($ip eq "127.0.0.1");
+ next if ($ip =~ /^127\./ || $ip =~ /^10\./);
$parm_ipv4 = $ip;
}
print "\n*** Host name has upper case characters: this may cause problems ***\n\n";
}
-# Find the user's shell
-
-$parm_shell = $ENV{'SHELL'};
##################################################
# because the current binary does not support the right facilities, and also
# those that are outside the numerical range selected.
-print "\nTest range is $test_start to $test_end\n";
+print "\nTest range is $test_start to $test_end (flavour $flavour)\n";
print "Omitting \${dlfunc expansion tests (loadable module not present)\n"
if $dlfunc_deleted;
print "Omitting dbm tests (unable to copy exim_dbmbuild)\n"
foreach $test (@testlist)
{
- next if $test !~ /^\d{4}$/;
+ next if $test !~ /^\d{4}(?:\.\d+)?$/;
next if $test < $test_start || $test > $test_end;
push @test_list, "$testdir/$test";
}
}
}
+# Set a user's shell, distinguishable from /bin/sh
+
+symlink("/bin/sh","aux-var/sh");
+$ENV{'SHELL'} = $parm_shell = $parm_cwd . "/aux-var/sh";
##################################################
# Create fake DNS zones for this host #
$exp_v6 = $1 . ':0' x (8-length($exp_v6)) . ':' . $2;
} elsif ( $parm_ipv6 =~ /^::(.+[^:])$/ ) {
$exp_v6 = '0:' x (9-length($exp_v6)) . $1;
+ } else {
+ $exp_v6 = $parm_ipv6;
}
my(@components) = split /:/, $exp_v6;
my(@nibbles) = reverse (split /\s*/, shift @components);
open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
print "\nPress RETURN to run the tests: ";
-$_ = <T>;
+$_ = $force_continue ? "c" : <T>;
print "\n";
$lasttestdir = "";
local($lineno) = 0;
local($commandno) = 0;
local($subtestno) = 0;
- local($testno) = substr($test, -4);
+ (local $testno = $test) =~ s|.*/||;
local($sortlog) = 0;
my($gnutls) = 0;
$stdout_skip = 0;
$rmfiltertest = 0;
$is_ipv6test = 0;
+ $TEST_STATE->{munge} = "";
# Remove the associative arrays used to hold checked mail files and msglogs
undef %expected_msglogs;
# Open the test's script
-
open(SCRIPT, "scripts/$test") ||
tests_exit(-1, "Failed to open \"scripts/$test\": $!");
+ # Run through the script once to set variables which should be global
+ while (<SCRIPT>)
+ {
+ if (/^no_message_check/) { $message_skip = 1; next; }
+ if (/^no_msglog_check/) { $msglog_skip = 1; next; }
+ if (/^no_stderr_check/) { $stderr_skip = 1; next; }
+ if (/^no_stdout_check/) { $stdout_skip = 1; next; }
+ if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
+ if (/^sortlog/) { $sortlog = 1; next; }
+ }
+ # Reset to beginning of file for per test interpreting/processing
+ seek(SCRIPT, 0, 0);
# The first line in the script must be a comment that is used to identify
# the set of tests as a whole.
while (<SCRIPT>)
{
$lineno++;
+ # Could remove these variable settings because they are already
+ # set above, but doesn't hurt to leave them here.
if (/^no_message_check/) { $message_skip = 1; next; }
if (/^no_msglog_check/) { $msglog_skip = 1; next; }
if (/^no_stderr_check/) { $stderr_skip = 1; next; }
my($rc, $run_extra) = run_command($testno, \$subtestno, \$expectrc, \$commandname, $TEST_STATE);
my($cmdrc) = $?;
+$0 = "[runtest $testno]";
+
if ($debug) {
print ">> rc=$rc cmdrc=$cmdrc\n";
if (defined $run_extra) {
for (;;)
{
print "\nshow stdErr, show stdOut, Retry, Continue (without file comparison), or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ print "... continue forced\n" if $force_continue;
last if /^[rc]$/i;
if (/^e$/i)
{
for (;;)
{
print "\nShow server stdout, Retry, Continue, or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ print "... continue forced\n" if $force_continue;
last if /^[rc]$/i;
if (/^s$/i)
# The script has finished. Check the all the output that was generated. The
# function returns 0 if all is well, 1 if we should rerun the test (the files
+ # function returns 0 if all is well, 1 if we should rerun the test (the files
# have been updated). It does not return if the user responds Q to a prompt.
if ($retry)
if ($docheck)
{
- if (check_output() != 0)
+ if (check_output($TEST_STATE->{munge}) != 0)
{
print (("#" x 79) . "\n");
redo;
git://git.exim.org / users / jgh / exim.git / blobdiff