* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
+/* Copyright (c) The Exim Maintainers 2020 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions concerned with running Exim as a daemon */
} smtp_slot;
/* An empty slot for initializing (Standard C does not allow constructor
-expressions in assigments except as initializers in declarations). */
+expressions in assignments except as initializers in declarations). */
-static smtp_slot empty_smtp_slot = { 0, NULL };
+static smtp_slot empty_smtp_slot = { .pid = 0, .host_address = NULL };
static SIGNAL_BOOL sigchld_seen;
static SIGNAL_BOOL sighup_seen;
+static SIGNAL_BOOL sigterm_seen;
static int accept_retry_count = 0;
static int accept_retry_errno;
}
+/* SIGTERM handler. Try to get the damon pif file removed
+before exiting. */
+
+static void
+main_sigterm_handler(int sig)
+{
+sigterm_seen = TRUE;
+}
+
+
/*************************************************
static void
never_error(uschar *log_msg, uschar *smtp_msg, int was_errno)
{
-uschar *emsg = (was_errno <= 0)? US"" :
- string_sprintf(": %s", strerror(was_errno));
+uschar *emsg = was_errno <= 0
+ ? US"" : string_sprintf(": %s", strerror(was_errno));
log_write(0, LOG_MAIN|LOG_PANIC, "%s%s", log_msg, emsg);
-if (smtp_out != NULL) smtp_printf("421 %s\r\n", smtp_msg);
+if (smtp_out) smtp_printf("421 %s\r\n", FALSE, smtp_msg);
}
+/*************************************************
+*************************************************/
+
+static void
+close_daemon_sockets(int daemon_notifier_fd,
+ int * listen_sockets, int listen_socket_count)
+{
+if (daemon_notifier_fd >= 0) (void) close(daemon_notifier_fd);
+for (int i = 0; i < listen_socket_count; i++) (void) close(listen_sockets[i]);
+}
+
+
/*************************************************
* Handle a connected SMTP call *
*************************************************/
EXIM_SOCKLEN_T ifsize = sizeof(interface_sockaddr);
int dup_accept_socket = -1;
int max_for_this_host = 0;
-int wfsize = 0;
-int wfptr = 0;
int save_log_selector = *log_selector;
-uschar *whofrom = NULL;
+gstring * whofrom;
-void *reset_point = store_get(0);
+rmark reset_point = store_mark();
/* Make the address available in ASCII representation, and also fish out
the remote port. */
input stream. These operations fail only the exceptional circumstances. Note
that never_error() won't use smtp_out if it is NULL. */
-smtp_out = fdopen(accept_socket, "wb");
-if (smtp_out == NULL)
+if (!(smtp_out = fdopen(accept_socket, "wb")))
{
never_error(US"daemon: fdopen() for smtp_out failed", US"", errno);
goto ERROR_RETURN;
}
-dup_accept_socket = dup(accept_socket);
-if (dup_accept_socket < 0)
+if ((dup_accept_socket = dup(accept_socket)) < 0)
{
never_error(US"daemon: couldn't dup socket descriptor",
US"Connection setup failed", errno);
goto ERROR_RETURN;
}
-smtp_in = fdopen(dup_accept_socket, "rb");
-if (smtp_in == NULL)
+if (!(smtp_in = fdopen(dup_accept_socket, "rb")))
{
never_error(US"daemon: fdopen() for smtp_in failed",
US"Connection setup failed", errno);
{
log_write(0, LOG_MAIN | ((errno == ECONNRESET)? 0 : LOG_PANIC),
"getsockname() failed: %s", strerror(errno));
- smtp_printf("421 Local problem: getsockname() failed; please try again later\r\n");
+ smtp_printf("421 Local problem: getsockname() failed; please try again later\r\n", FALSE);
goto ERROR_RETURN;
}
the local interface data. This is for logging; at the end of this function the
memory is reclaimed. */
-whofrom = string_append(whofrom, &wfsize, &wfptr, 3, "[", sender_host_address, "]");
+whofrom = string_append(NULL, 3, "[", sender_host_address, "]");
if (LOGGING(incoming_port))
- whofrom = string_append(whofrom, &wfsize, &wfptr, 2, ":", string_sprintf("%d",
- sender_host_port));
+ whofrom = string_fmt_append(whofrom, ":%d", sender_host_port);
if (LOGGING(incoming_interface))
- whofrom = string_append(whofrom, &wfsize, &wfptr, 4, " I=[",
- interface_address, "]:", string_sprintf("%d", interface_port));
+ whofrom = string_fmt_append(whofrom, " I=[%s]:%d",
+ interface_address, interface_port);
-whofrom[wfptr] = 0; /* Terminate the newly-built string */
+(void) string_from_gstring(whofrom); /* Terminate the newly-built string */
/* Check maximum number of connections. We do not check for reserved
connections or unacceptable hosts here. That is done in the subprocess because
DEBUG(D_any) debug_printf("rejecting SMTP connection: count=%d max=%d\n",
smtp_accept_count, smtp_accept_max);
smtp_printf("421 Too many concurrent SMTP connections; "
- "please try again later.\r\n");
+ "please try again later.\r\n", FALSE);
log_write(L_connection_reject,
LOG_MAIN, "Connection from %s refused: too many connections",
- whofrom);
+ whofrom->s);
goto ERROR_RETURN;
}
{
DEBUG(D_any) debug_printf("rejecting SMTP connection: load average = %.2f\n",
(double)load_average/1000.0);
- smtp_printf("421 Too much load; please try again later.\r\n");
+ smtp_printf("421 Too much load; please try again later.\r\n", FALSE);
log_write(L_connection_reject,
LOG_MAIN, "Connection from %s refused: load average = %.2f",
- whofrom, (double)load_average/1000.0);
+ whofrom->s, (double)load_average/1000.0);
goto ERROR_RETURN;
}
}
uschar *expanded = expand_string(smtp_accept_max_per_host);
if (expanded == NULL)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC, "expansion of smtp_accept_max_per_host "
- "failed for %s: %s", whofrom, expand_string_message);
+ "failed for %s: %s", whofrom->s, expand_string_message);
}
/* For speed, interpret a decimal number inline here */
else
max_for_this_host = max_for_this_host * 10 + *s++ - '0';
if (*s != 0)
log_write(0, LOG_MAIN|LOG_PANIC, "expansion of smtp_accept_max_per_host "
- "for %s contains non-digit: %s", whofrom, expanded);
+ "for %s contains non-digit: %s", whofrom->s, expanded);
}
}
if ((max_for_this_host > 0) &&
(smtp_accept_count >= max_for_this_host))
{
- int i;
int host_accept_count = 0;
int other_host_count = 0; /* keep a count of non matches to optimise */
- for (i = 0; i < smtp_accept_max; ++i)
- {
- if (smtp_slots[i].host_address != NULL)
+ for (int i = 0; i < smtp_accept_max; ++i)
+ if (smtp_slots[i].host_address)
{
if (Ustrcmp(sender_host_address, smtp_slots[i].host_address) == 0)
host_accept_count++;
((smtp_accept_count - other_host_count) < max_for_this_host))
break;
}
- }
if (host_accept_count >= max_for_this_host)
{
"IP address: count=%d max=%d\n",
host_accept_count, max_for_this_host);
smtp_printf("421 Too many concurrent SMTP connections "
- "from this IP address; please try again later.\r\n");
+ "from this IP address; please try again later.\r\n", FALSE);
log_write(L_connection_reject,
LOG_MAIN, "Connection from %s refused: too many connections "
- "from that IP address", whofrom);
+ "from that IP address", whofrom->s);
goto ERROR_RETURN;
}
}
save_log_selector &= ~L_smtp_connection;
else
log_write(L_smtp_connection, LOG_MAIN, "SMTP connection from %s "
- "(TCP/IP connection count = %d)", whofrom, smtp_accept_count + 1);
+ "(TCP/IP connection count = %d)", whofrom->s, smtp_accept_count + 1);
}
/* Now we can fork the accepting process; do a lookup tidy, just in case any
expansion above did a lookup. */
search_tidyup();
-pid = fork();
+pid = exim_fork(US"daemon-accept");
/* Handle the child process */
if (pid == 0)
{
- int i;
int queue_only_reason = 0;
int old_pool = store_pool;
int save_debug_selector = debug_selector;
likely what it depends on.) */
smtp_active_hostname = primary_hostname;
- if (raw_active_hostname != NULL)
+ if (raw_active_hostname)
{
- uschar *nah = expand_string(raw_active_hostname);
- if (nah == NULL)
+ uschar * nah = expand_string(raw_active_hostname);
+ if (!nah)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
{
log_write(0, LOG_MAIN|LOG_PANIC, "failed to expand \"%s\" "
"(smtp_active_hostname): %s", raw_active_hostname,
expand_string_message);
smtp_printf("421 Local configuration error; "
- "please try again later.\r\n");
+ "please try again later.\r\n", FALSE);
mac_smtp_fflush();
search_tidyup();
- _exit(EXIT_FAILURE);
+ exim_underbar_exit(EXIT_FAILURE);
}
}
- else if (nah[0] != 0) smtp_active_hostname = nah;
+ else if (*nah) smtp_active_hostname = nah;
}
/* Initialize the queueing flags */
extensive comment before the reception loop in exim.c for a fuller
explanation of this logic. */
- for (i = 0; i < listen_socket_count; i++) (void)close(listen_sockets[i]);
+ close_daemon_sockets(daemon_notifier_fd, listen_sockets, listen_socket_count);
/* Set FD_CLOEXEC on the SMTP socket. We don't want any rogue child processes
to be able to communicate with them, under any circumstances. */
#else
signal(SIGCHLD, SIG_IGN);
#endif
+ signal(SIGTERM, SIG_DFL);
/* Attempt to get an id from the sending machine via the RFC 1413
protocol. We do this in the sub-process in order not to hold up the
finding the id, but turn it on again afterwards so that information about the
incoming connection is output. */
- if (debug_daemon) debug_selector = 0;
+ if (f.debug_daemon) debug_selector = 0;
verify_get_ident(IDENT_PORT);
host_build_sender_fullhost();
debug_selector = save_debug_selector;
/* Now disable debugging permanently if it's required only for the daemon
process. */
- if (debug_daemon) debug_selector = 0;
+ if (f.debug_daemon) debug_selector = 0;
/* If there are too many child processes for immediate delivery,
set the session_local_queue_only flag, which is initialized from the
{
mac_smtp_fflush();
search_tidyup();
- _exit(EXIT_SUCCESS);
+ exim_underbar_exit(EXIT_SUCCESS);
}
for (;;)
{
int rc;
message_id[0] = 0; /* Clear out any previous message_id */
- reset_point = store_get(0); /* Save current store high water point */
+ reset_point = store_mark(); /* Save current store high water point */
DEBUG(D_any)
debug_printf("Process %d is ready for new message\n", (int)getpid());
search_tidyup(); /* Close cached databases */
if (!ok) /* Connection was dropped */
{
+ cancel_cutthrough_connection(TRUE, US"receive dropped");
mac_smtp_fflush();
smtp_log_no_mail(); /* Log no mail if configured */
- _exit(EXIT_SUCCESS);
+ exim_underbar_exit(EXIT_SUCCESS);
}
if (message_id[0] == 0) continue; /* No message was accepted */
}
else
{
- mac_smtp_fflush();
+ if (smtp_out)
+ {
+ int fd = fileno(smtp_in);
+ uschar buf[128];
+
+ mac_smtp_fflush();
+ /* drain socket, for clean TCP FINs */
+ if (fcntl(fd, F_SETFL, O_NONBLOCK) == 0)
+ for(int i = 16; read(fd, buf, sizeof(buf)) > 0 && i > 0; ) i--;
+ }
+ cancel_cutthrough_connection(TRUE, US"message setup dropped");
search_tidyup();
smtp_log_no_mail(); /* Log no mail if configured */
- _exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
+
+ /*XXX should we pause briefly, hoping that the client will be the
+ active TCP closer hence get the TCP_WAIT endpoint? */
+ DEBUG(D_receive) debug_printf("SMTP>>(close on process exit)\n");
+ exim_underbar_exit(rc ? EXIT_FAILURE : EXIT_SUCCESS);
}
/* Show the recipients when debugging */
DEBUG(D_receive)
{
- int i;
- if (sender_address != NULL)
+ if (sender_address)
debug_printf("Sender: %s\n", sender_address);
- if (recipients_list != NULL)
+ if (recipients_list)
{
debug_printf("Recipients:\n");
- for (i = 0; i < recipients_count; i++)
+ for (int i = 0; i < recipients_count; i++)
debug_printf(" %s\n", recipients_list[i].address);
}
}
/* Reclaim up the store used in accepting this message */
- store_reset(reset_point);
+ {
+ int r = receive_messagecount;
+ BOOL q = f.queue_only_policy;
+ smtp_reset(reset_point);
+ reset_point = NULL;
+ f.queue_only_policy = q;
+ receive_messagecount = r;
+ }
/* If queue_only is set or if there are too many incoming connections in
existence, session_local_queue_only will be TRUE. If it is not, check
very long-lived connections from scanning appliances where this is not the
best strategy. In such cases, queue_only_load_latch should be set false. */
- local_queue_only = session_local_queue_only;
- if (!local_queue_only && queue_only_load >= 0)
+ if ( !(local_queue_only = session_local_queue_only)
+ && queue_only_load >= 0
+ && (local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load)
+ )
{
- local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load;
- if (local_queue_only)
- {
- queue_only_reason = 3;
- if (queue_only_load_latch) session_local_queue_only = TRUE;
- }
+ queue_only_reason = 3;
+ if (queue_only_load_latch) session_local_queue_only = TRUE;
}
/* Log the queueing here, when it will get a message id attached, but
if (local_queue_only) switch(queue_only_reason)
{
- case 1:
- log_write(L_delay_delivery,
+ case 1: log_write(L_delay_delivery,
LOG_MAIN, "no immediate delivery: too many connections "
"(%d, max %d)", smtp_accept_count, smtp_accept_queue);
- break;
+ break;
- case 2:
- log_write(L_delay_delivery,
+ case 2: log_write(L_delay_delivery,
LOG_MAIN, "no immediate delivery: more than %d messages "
"received in one connection", smtp_accept_queue_per_connection);
- break;
+ break;
- case 3:
- log_write(L_delay_delivery,
+ case 3: log_write(L_delay_delivery,
LOG_MAIN, "no immediate delivery: load average %.2f",
(double)load_average/1000.0);
- break;
+ break;
}
/* If a delivery attempt is required, spin off a new process to handle it.
If we are not root, we have to re-exec exim unless deliveries are being
done unprivileged. */
- else if (!queue_only_policy && !deliver_freeze)
+ else if ( (!f.queue_only_policy || f.queue_smtp)
+ && !f.deliver_freeze)
{
pid_t dpid;
mac_smtp_fflush();
- if ((dpid = fork()) == 0)
+ if ((dpid = exim_fork(US"daemon-accept-delivery")) == 0)
{
(void)fclose(smtp_in);
(void)fclose(smtp_out);
/* Don't ever molest the parent's SSL connection, but do clean up
the data structures if necessary. */
- #ifdef SUPPORT_TLS
- tls_close(TRUE, FALSE);
- #endif
+#ifndef DISABLE_TLS
+ tls_close(NULL, TLS_NO_SHUTDOWN);
+#endif
/* Reset SIGHUP and SIGCHLD in the child in both cases. */
signal(SIGHUP, SIG_DFL);
signal(SIGCHLD, SIG_DFL);
+ signal(SIGTERM, SIG_DFL);
if (geteuid() != root_uid && !deliver_drop_privilege)
{
signal(SIGALRM, SIG_DFL);
- (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, FALSE, 2, US"-Mc",
- message_id);
+ delivery_re_exec(CEE_EXEC_PANIC);
/* Control does not return here. */
}
/* No need to re-exec; SIGALRM remains set to the default handler */
- (void)deliver_message(message_id, FALSE, FALSE);
+ (void) deliver_message(message_id, FALSE, FALSE);
search_tidyup();
- _exit(EXIT_SUCCESS);
+ exim_underbar_exit(EXIT_SUCCESS);
}
if (dpid > 0)
{
+ release_cutthrough_connection(US"passed for delivery");
DEBUG(D_any) debug_printf("forked delivery process %d\n", (int)dpid);
}
else
- {
+ {
+ cancel_cutthrough_connection(TRUE, US"delivery fork failed");
log_write(0, LOG_MAIN|LOG_PANIC, "daemon: delivery process fork "
"failed: %s", strerror(errno));
- }
+ }
}
}
}
remember the pid for ticking off when the child completes. */
if (pid < 0)
- {
never_error(US"daemon: accept process fork failed", US"Fork failed", errno);
- }
else
{
- int i;
- for (i = 0; i < smtp_accept_max; ++i)
- {
+ for (int i = 0; i < smtp_accept_max; ++i)
if (smtp_slots[i].pid <= 0)
{
smtp_slots[i].pid = pid;
- if (smtp_accept_max_per_host != NULL)
+ /* Connection closes come asyncronously, so we cannot stack this store */
+ if (smtp_accept_max_per_host)
smtp_slots[i].host_address = string_copy_malloc(sender_host_address);
smtp_accept_count++;
break;
}
- }
DEBUG(D_any) debug_printf("%d SMTP accept process%s running\n",
- smtp_accept_count, (smtp_accept_count == 1)? "" : "es");
+ smtp_accept_count, smtp_accept_count == 1 ? "" : "es");
}
/* Get here via goto in error cases */
exist, something went wrong while setting things up. Make sure the socket
descriptors are closed, in order to drop the connection. */
-if (smtp_out != NULL)
+if (smtp_out)
{
if (fclose(smtp_out) != 0 && errno != ECONNRESET && errno != EPIPE)
log_write(0, LOG_MAIN|LOG_PANIC, "daemon: fclose(smtp_out) failed: %s",
}
else (void)close(accept_socket);
-if (smtp_in != NULL)
+if (smtp_in)
{
if (fclose(smtp_in) != 0 && errno != ECONNRESET && errno != EPIPE)
log_write(0, LOG_MAIN|LOG_PANIC, "daemon: fclose(smtp_in) failed: %s",
the incoming host address and an expanded active_hostname. */
log_close_all();
+interface_address =
+sender_host_address = NULL;
store_reset(reset_point);
sender_host_address = NULL;
}
while ((pid = waitpid(-1, &status, WNOHANG)) > 0)
{
- int i;
DEBUG(D_any)
{
debug_printf("child %d ended: status=0x%x\n", (int)pid, status);
/* If it's a listening daemon for which we are keeping track of individual
subprocesses, deal with an accepting process that has terminated. */
- if (smtp_slots != NULL)
+ if (smtp_slots)
{
+ int i;
for (i = 0; i < smtp_accept_max; i++)
- {
if (smtp_slots[i].pid == pid)
{
- if (smtp_slots[i].host_address != NULL)
+ if (smtp_slots[i].host_address)
store_free(smtp_slots[i].host_address);
smtp_slots[i] = empty_smtp_slot;
if (--smtp_accept_count < 0) smtp_accept_count = 0;
smtp_accept_count, (smtp_accept_count == 1)? "" : "es");
break;
}
- }
if (i < smtp_accept_max) continue; /* Found an accepting process */
}
/* If it wasn't an accepting process, see if it was a queue-runner
process that we are tracking. */
- if (queue_pid_slots != NULL)
+ if (queue_pid_slots)
{
- for (i = 0; i < queue_run_max; i++)
- {
+ int max = atoi(CS expand_string(queue_run_max));
+ for (int i = 0; i < max; i++)
if (queue_pid_slots[i] == pid)
{
queue_pid_slots[i] = 0;
queue_run_count, (queue_run_count == 1)? "" : "es");
break;
}
+ }
+ }
+}
+
+
+
+static void
+set_pid_file_path(void)
+{
+if (override_pid_file_path)
+ pid_file_path = override_pid_file_path;
+
+if (!*pid_file_path)
+ pid_file_path = string_sprintf("%s/exim-daemon.pid", spool_directory);
+}
+
+
+/* Remove the daemon's pidfile. Note: runs with root privilege,
+as a direct child of the daemon. Does not return. */
+
+void
+delete_pid_file(void)
+{
+uschar * daemon_pid = string_sprintf("%d\n", (int)getppid());
+FILE * f;
+
+set_pid_file_path();
+if ((f = Ufopen(pid_file_path, "rb")))
+ {
+ if ( fgets(CS big_buffer, big_buffer_size, f)
+ && Ustrcmp(daemon_pid, big_buffer) == 0
+ )
+ if (Uunlink(pid_file_path) == 0)
+ {
+ DEBUG(D_any)
+ debug_printf("%s unlink: %s\n", pid_file_path, strerror(errno));
}
+ else
+ DEBUG(D_any)
+ debug_printf("unlinked %s\n", pid_file_path);
+ fclose(f);
+ }
+else
+ DEBUG(D_any)
+ debug_printf("%s\n", string_open_failed(errno, "pid file %s",
+ pid_file_path));
+exim_exit(EXIT_SUCCESS);
+}
+
+
+/* Called by the daemon; exec a child to get the pid file deleted
+since we may require privs for the containing directory */
+
+static void
+daemon_die(void)
+{
+int pid;
+
+if (daemon_notifier_fd >= 0)
+ {
+ close(daemon_notifier_fd);
+ daemon_notifier_fd = -1;
+#ifndef EXIM_HAVE_ABSTRACT_UNIX_SOCKETS
+ {
+ uschar * s = expand_string(notifier_socket);
+ DEBUG(D_any) debug_printf("unlinking notifier socket %s\n", s);
+ Uunlink(s);
}
+#endif
}
+
+if (f.running_in_test_harness || write_pid)
+ {
+ if ((pid = exim_fork(US"daemon-del-pidfile")) == 0)
+ {
+ if (override_pid_file_path)
+ (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, FALSE, 3,
+ "-oP", override_pid_file_path, "-oPX");
+ else
+ (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, FALSE, 1, "-oPX");
+
+ /* Control never returns here. */
+ }
+ if (pid > 0)
+ child_close(pid, 1);
+ }
+exim_exit(EXIT_SUCCESS);
+}
+
+
+/*************************************************
+* Listener socket for local work prompts *
+*************************************************/
+
+static void
+daemon_notifier_socket(void)
+{
+int fd;
+const uschar * where;
+struct sockaddr_un sa_un = {.sun_family = AF_UNIX};
+int len;
+
+if (override_local_interfaces && !override_pid_file_path)
+ {
+ DEBUG(D_any)
+ debug_printf("-oX used without -oP so not creating notifier socket\n");
+ return;
+ }
+
+DEBUG(D_any) debug_printf("creating notifier socket\n");
+
+#ifdef SOCK_CLOEXEC
+if ((fd = socket(PF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0)) < 0)
+ { where = US"socket"; goto bad; }
+#else
+if ((fd = socket(PF_UNIX, SOCK_DGRAM, 0)) < 0)
+ { where = US"socket"; goto bad; }
+(void)fcntl(fd, F_SETFD, fcntl(fd, F_GETFD) | FD_CLOEXEC);
+#endif
+
+#ifdef EXIM_HAVE_ABSTRACT_UNIX_SOCKETS
+sa_un.sun_path[0] = 0; /* Abstract local socket addr - Linux-specific? */
+len = offsetof(struct sockaddr_un, sun_path) + 1
+ + snprintf(sa_un.sun_path+1, sizeof(sa_un.sun_path)-1, "%s",
+ expand_string(notifier_socket));
+DEBUG(D_any) debug_printf(" @%s\n", sa_un.sun_path+1);
+#else /* filesystem-visible and persistent; will neeed removal */
+len = offsetof(struct sockaddr_un, sun_path)
+ + snprintf(sa_un.sun_path, sizeof(sa_un.sun_path), "%s",
+ expand_string(notifier_socket));
+DEBUG(D_any) debug_printf(" %s\n", sa_un.sun_path);
+#endif
+
+if (bind(fd, (const struct sockaddr *)&sa_un, len) < 0)
+ { where = US"bind"; goto bad; }
+
+#ifdef SO_PASSCRED /* Linux */
+if (setsockopt(fd, SOL_SOCKET, SO_PASSCRED, &on, sizeof(on)) < 0)
+ { where = US"SO_PASSCRED"; goto bad2; }
+#elif defined(LOCAL_CREDS) /* FreeBSD-ish */
+if (setsockopt(fd, 0, LOCAL_CREDS, &on, sizeof(on)) < 0)
+ { where = US"LOCAL_CREDS"; goto bad2; }
+#endif
+
+/* debug_printf("%s: fd %d\n", __FUNCTION__, fd); */
+daemon_notifier_fd = fd;
+return;
+
+bad2:
+#ifndef EXIM_HAVE_ABSTRACT_UNIX_SOCKETS
+ Uunlink(sa_un.sun_path);
+#endif
+bad:
+ log_write(0, LOG_MAIN|LOG_PANIC, "%s %s: %s",
+ __FUNCTION__, where, strerror(errno));
+ close(fd);
+ return;
}
+static uschar queuerun_msgid[MESSAGE_ID_LENGTH+1];
+
+/* Return TRUE if a sigalrm should be emulated */
+static BOOL
+daemon_notification(void)
+{
+uschar buf[256], cbuf[256];
+struct sockaddr_un sa_un;
+struct iovec iov = {.iov_base = buf, .iov_len = sizeof(buf)-1};
+struct msghdr msg = { .msg_name = &sa_un,
+ .msg_namelen = sizeof(sa_un),
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
+ .msg_control = cbuf,
+ .msg_controllen = sizeof(cbuf)
+ };
+ssize_t sz;
+
+buf[sizeof(buf)-1] = 0;
+if ((sz = recvmsg(daemon_notifier_fd, &msg, 0)) <= 0) return FALSE;
+if (sz >= sizeof(buf)) return FALSE;
+
+#ifdef notdef
+debug_printf("addrlen %d\n", msg.msg_namelen);
+#endif
+DEBUG(D_queue_run) debug_printf("%s from addr '%s%.*s'\n", __FUNCTION__,
+ *sa_un.sun_path ? "" : "@",
+ (int)msg.msg_namelen - (*sa_un.sun_path ? 0 : 1),
+ sa_un.sun_path + (*sa_un.sun_path ? 0 : 1));
+
+/* Refuse to handle the item unless the peer has good credentials */
+#ifdef SCM_CREDENTIALS
+# define EXIM_SCM_CR_TYPE SCM_CREDENTIALS
+#elif defined(LOCAL_CREDS) && defined(SCM_CREDS)
+# define EXIM_SCM_CR_TYPE SCM_CREDS
+#else
+ /* The OS has no way to get the creds of the caller (for a unix/datagram socket.
+ Punt; don't try to check. */
+#endif
+
+#ifdef EXIM_SCM_CR_TYPE
+for (struct cmsghdr * cp = CMSG_FIRSTHDR(&msg);
+ cp;
+ cp = CMSG_NXTHDR(&msg, cp))
+ if (cp->cmsg_level == SOL_SOCKET && cp->cmsg_type == EXIM_SCM_CR_TYPE)
+ {
+# ifdef SCM_CREDENTIALS /* Linux */
+ struct ucred * cr = (struct ucred *) CMSG_DATA(cp);
+ if (cr->uid && cr->uid != exim_uid)
+ {
+ DEBUG(D_queue_run) debug_printf("%s: sender creds pid %d uid %d gid %d\n",
+ __FUNCTION__, (int)cr->pid, (int)cr->uid, (int)cr->gid);
+ return FALSE;
+ }
+# elif defined(LOCAL_CREDS) /* BSD-ish */
+ struct sockcred * cr = (struct sockcred *) CMSG_DATA(cp);
+ if (cr->sc_uid && cr->sc_uid != exim_uid)
+ {
+ DEBUG(D_queue_run) debug_printf("%s: sender creds pid ??? uid %d gid %d\n",
+ __FUNCTION__, (int)cr->sc_uid, (int)cr->sc_gid);
+ return FALSE;
+ }
+# endif
+ break;
+ }
+#endif
+
+buf[sz] = 0;
+switch (buf[0])
+ {
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ case NOTIFY_MSG_QRUN:
+ /* this should be a message_id */
+ DEBUG(D_queue_run)
+ debug_printf("%s: qrunner trigger: %s\n", __FUNCTION__, buf+1);
+ memcpy(queuerun_msgid, buf+1, MESSAGE_ID_LENGTH+1);
+ return TRUE;
+#endif /*EXPERIMENTAL_QUEUE_RAMP*/
+
+ case NOTIFY_QUEUE_SIZE_REQ:
+ {
+ uschar buf[16];
+ int len = snprintf(CS buf, sizeof(buf), "%u", queue_count_cached());
+
+ DEBUG(D_queue_run)
+ debug_printf("%s: queue size request: %s\n", __FUNCTION__, buf);
+
+ if (sendto(daemon_notifier_fd, buf, len, 0,
+ (const struct sockaddr *)&sa_un, msg.msg_namelen) < 0)
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "%s: sendto: %s\n", __FUNCTION__, strerror(errno));
+ return FALSE;
+ }
+ }
+return FALSE;
+}
+
/*************************************************
* Exim Daemon Mainline *
int listen_socket_count = 0;
ip_address_item *addresses = NULL;
time_t last_connection_time = (time_t)0;
+int local_queue_run_max = atoi(CS expand_string(queue_run_max));
+
+process_purpose = US"daemon";
/* If any debugging options are set, turn on the D_pid bit so that all
debugging lines get the pid added. */
DEBUG(D_any|D_v) debug_selector |= D_pid;
-if (inetd_wait_mode)
+if (f.inetd_wait_mode)
{
- int on = 1;
-
listen_socket_count = 1;
- listen_sockets = store_get(sizeof(int));
+ listen_sockets = store_get(sizeof(int), FALSE);
(void) close(3);
if (dup2(0, 3) == -1)
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
}
-if (inetd_wait_mode || daemon_listen)
+if (f.inetd_wait_mode || f.daemon_listen)
{
/* If any option requiring a load average to be available during the
reception of a message is set, call os_getloadavg() while we are root
first, so that we can return non-zero if there are any syntax errors, and also
write to stderr. */
-if (daemon_listen && !inetd_wait_mode)
+if (f.daemon_listen && !f.inetd_wait_mode)
{
int *default_smtp_port;
int sep;
that contain neither a dot nor a colon are used to override daemon_smtp_port.
Any other items are used to override local_interfaces. */
- if (override_local_interfaces != NULL)
+ if (override_local_interfaces)
{
- uschar *new_smtp_port = NULL;
- uschar *new_local_interfaces = NULL;
- int portsize = 0;
- int portptr = 0;
- int ifacesize = 0;
- int ifaceptr = 0;
+ gstring * new_smtp_port = NULL;
+ gstring * new_local_interfaces = NULL;
- if (override_pid_file_path == NULL) write_pid = FALSE;
+ if (!override_pid_file_path) write_pid = FALSE;
list = override_local_interfaces;
sep = 0;
- while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
+ while ((s = string_nextinlist(&list, &sep, NULL, 0)))
{
uschar joinstr[4];
- uschar **ptr;
- int *sizeptr;
- int *ptrptr;
+ gstring ** gp = Ustrpbrk(s, ".:") ? &new_local_interfaces : &new_smtp_port;
- if (Ustrpbrk(s, ".:") == NULL)
- {
- ptr = &new_smtp_port;
- sizeptr = &portsize;
- ptrptr = &portptr;
- }
- else
- {
- ptr = &new_local_interfaces;
- sizeptr = &ifacesize;
- ptrptr = &ifaceptr;
- }
-
- if (*ptr == NULL)
+ if (!*gp)
{
joinstr[0] = sep;
joinstr[1] = ' ';
- *ptr = string_catn(*ptr, sizeptr, ptrptr, US"<", 1);
+ *gp = string_catn(*gp, US"<", 1);
}
- *ptr = string_catn(*ptr, sizeptr, ptrptr, joinstr, 2);
- *ptr = string_cat (*ptr, sizeptr, ptrptr, s);
+ *gp = string_catn(*gp, joinstr, 2);
+ *gp = string_cat (*gp, s);
}
- if (new_smtp_port != NULL)
+ if (new_smtp_port)
{
- new_smtp_port[portptr] = 0;
- daemon_smtp_port = new_smtp_port;
+ daemon_smtp_port = string_from_gstring(new_smtp_port);
DEBUG(D_any) debug_printf("daemon_smtp_port overridden by -oX:\n %s\n",
daemon_smtp_port);
}
- if (new_local_interfaces != NULL)
+ if (new_local_interfaces)
{
- new_local_interfaces[ifaceptr] = 0;
- local_interfaces = new_local_interfaces;
+ local_interfaces = string_from_gstring(new_local_interfaces);
local_iface_source = US"-oX data";
DEBUG(D_any) debug_printf("local_interfaces overridden by -oX:\n %s\n",
local_interfaces);
}
/* Create a list of default SMTP ports, to be used if local_interfaces
- contains entries without explict ports. First count the number of ports, then
+ contains entries without explicit ports. First count the number of ports, then
build a translated list in a vector. */
list = daemon_smtp_port;
sep = 0;
- while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
+ while ((s = string_nextinlist(&list, &sep, NULL, 0)))
pct++;
- default_smtp_port = store_get((pct+1) * sizeof(int));
+ default_smtp_port = store_get((pct+1) * sizeof(int), FALSE);
list = daemon_smtp_port;
sep = 0;
for (pct = 0;
- (s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size));
+ (s = string_nextinlist(&list, &sep, NULL, 0));
pct++)
{
if (isdigit(*s))
while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
if (!isdigit(*s))
{
+ gstring * g = NULL;
+
list = tls_in.on_connect_ports;
tls_in.on_connect_ports = NULL;
sep = 0;
{
if (!isdigit(*s))
{
- struct servent *smtp_service = getservbyname(CS s, "tcp");
+ struct servent * smtp_service = getservbyname(CS s, "tcp");
if (!smtp_service)
log_write(0, LOG_PANIC_DIE|LOG_CONFIG, "TCP port \"%s\" not found", s);
- s= string_sprintf("%d", (int)ntohs(smtp_service->s_port));
+ s = string_sprintf("%d", (int)ntohs(smtp_service->s_port));
}
- tls_in.on_connect_ports = string_append_listele(tls_in.on_connect_ports,
- ':', s);
+ g = string_append_listele(g, ':', s);
}
+ if (g)
+ tls_in.on_connect_ports = g->s;
break;
}
In the same scan, fill in missing port numbers from the default list. When
there is more than one item in the list, extra items are created. */
- for (ipa = addresses; ipa != NULL; ipa = ipa->next)
+ for (ipa = addresses; ipa; ipa = ipa->next)
{
- int i;
-
- if (Ustrcmp(ipa->address, "0.0.0.0") == 0) ipa->address[0] = 0;
+ if (Ustrcmp(ipa->address, "0.0.0.0") == 0)
+ ipa->address[0] = 0;
else if (Ustrcmp(ipa->address, "::0") == 0)
{
ipa->address[0] = ':';
if (daemon_smtp_port[0] <= 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "no port specified for interface "
"%s and daemon_smtp_port is unset; cannot start daemon",
- (ipa->address[0] == 0)? US"\"all IPv4\"" :
- (ipa->address[1] == 0)? US"\"all IPv6\"" : ipa->address);
+ ipa->address[0] == 0 ? US"\"all IPv4\"" :
+ ipa->address[1] == 0 ? US"\"all IPv6\"" : ipa->address);
+
ipa->port = default_smtp_port[0];
- for (i = 1; default_smtp_port[i] > 0; i++)
+ for (int i = 1; default_smtp_port[i] > 0; i++)
{
- ip_address_item *new = store_get(sizeof(ip_address_item));
+ ip_address_item *new = store_get(sizeof(ip_address_item), FALSE);
+
memcpy(new->address, ipa->address, Ustrlen(ipa->address) + 1);
new->port = default_smtp_port[i];
new->next = ipa->next;
also simplifies the construction of the "daemon started" log line. */
pipa = &addresses;
- for (ipa = addresses; ipa != NULL; pipa = &(ipa->next), ipa = ipa->next)
+ for (ipa = addresses; ipa; pipa = &ipa->next, ipa = ipa->next)
{
ip_address_item *ipa2;
/* Handle an IPv4 wildcard */
if (ipa->address[0] == 0)
- {
- for (ipa2 = ipa; ipa2->next != NULL; ipa2 = ipa2->next)
+ for (ipa2 = ipa; ipa2->next; ipa2 = ipa2->next)
{
ip_address_item *ipa3 = ipa2->next;
if (ipa3->address[0] == ':' &&
break;
}
}
- }
/* Handle an IPv6 wildcard. */
else if (ipa->address[0] == ':' && ipa->address[1] == 0)
- {
- for (ipa2 = ipa; ipa2->next != NULL; ipa2 = ipa2->next)
+ for (ipa2 = ipa; ipa2->next; ipa2 = ipa2->next)
{
ip_address_item *ipa3 = ipa2->next;
if (ipa3->address[0] == 0 && ipa3->port == ipa->port)
break;
}
}
- }
}
/* Get a vector to remember all the sockets in */
- for (ipa = addresses; ipa != NULL; ipa = ipa->next)
+ for (ipa = addresses; ipa; ipa = ipa->next)
listen_socket_count++;
- listen_sockets = store_get(sizeof(int) * listen_socket_count);
+ listen_sockets = store_get(sizeof(int) * listen_socket_count, FALSE);
} /* daemon_listen but not inetd_wait_mode */
-if (daemon_listen)
+if (f.daemon_listen)
{
/* Do a sanity check on the max connects value just to save us from getting
if (smtp_accept_max > 0)
{
- int i;
- smtp_slots = store_get(smtp_accept_max * sizeof(smtp_slot));
- for (i = 0; i < smtp_accept_max; i++) smtp_slots[i] = empty_smtp_slot;
+ smtp_slots = store_get(smtp_accept_max * sizeof(smtp_slot), FALSE);
+ for (int i = 0; i < smtp_accept_max; i++) smtp_slots[i] = empty_smtp_slot;
}
}
setsid() for getting rid of the controlling terminal. For any OS that doesn't,
setsid() can be #defined as a no-op, or as something else. */
-if (background_daemon || inetd_wait_mode)
+if (f.background_daemon || f.inetd_wait_mode)
{
log_close_all(); /* Just in case anything was logged earlier */
search_tidyup(); /* Just in case any were used in reading the config. */
log_stderr = NULL; /* So no attempt to copy paniclog output */
}
-if (background_daemon)
+if (f.background_daemon)
{
/* If the parent process of this one has pid == 1, we are re-initializing the
daemon as the result of a SIGHUP. In this case, there is no need to do
if (getppid() != 1)
{
- pid_t pid = fork();
+ pid_t pid = exim_fork(US"daemon");
if (pid < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"fork() failed when starting daemon: %s", strerror(errno));
if (pid > 0) exit(EXIT_SUCCESS); /* in parent process, just exit */
/* We are now in the disconnected, daemon process (unless debugging). Set up
the listening sockets if required. */
-if (daemon_listen && !inetd_wait_mode)
+daemon_notifier_socket();
+
+if (f.daemon_listen && !f.inetd_wait_mode)
{
int sk;
- int on = 1;
ip_address_item *ipa;
/* For each IP address, create a socket, bind it to the appropriate port, and
available. Just log failure (can get protocol not available, just like
socket creation can). */
- #ifdef IPV6_V6ONLY
+#ifdef IPV6_V6ONLY
if (af == AF_INET6 && wildcard &&
- setsockopt(listen_sockets[sk], IPPROTO_IPV6, IPV6_V6ONLY, (char *)(&on),
+ setsockopt(listen_sockets[sk], IPPROTO_IPV6, IPV6_V6ONLY, CS (&on),
sizeof(on)) < 0)
log_write(0, LOG_MAIN, "Setting IPV6_V6ONLY on daemon's IPv6 wildcard "
"socket failed (%s): carrying on without it", strerror(errno));
- #endif /* IPV6_V6ONLY */
+#endif /* IPV6_V6ONLY */
/* Set SO_REUSEADDR so that the daemon can be restarted while a connection
is being handled. Without this, a connection will prevent reuse of the
smtp port for listening. */
if (setsockopt(listen_sockets[sk], SOL_SOCKET, SO_REUSEADDR,
- (uschar *)(&on), sizeof(on)) < 0)
+ US (&on), sizeof(on)) < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "setting SO_REUSEADDR on socket "
"failed when starting daemon: %s", strerror(errno));
disable this because it breaks some broken clients. */
if (tcp_nodelay) setsockopt(listen_sockets[sk], IPPROTO_TCP, TCP_NODELAY,
- (uschar *)(&on), sizeof(on));
+ US (&on), sizeof(on));
/* Now bind the socket to the required port; if Exim is being restarted
it may not always be possible to bind immediately, even with SO_REUSEADDR
necessary for (some release of) USAGI Linux; other IP stacks fail at the
listen() stage instead. */
+#ifdef TCP_FASTOPEN
+ f.tcp_fastopen_ok = TRUE;
+#endif
for(;;)
{
uschar *msg, *addr;
goto SKIP_SOCKET;
}
msg = US strerror(errno);
- addr = wildcard? ((af == AF_INET6)? US"(any IPv6)" : US"(any IPv4)") :
- ipa->address;
+ addr = wildcard
+ ? af == AF_INET6
+ ? US"(any IPv6)"
+ : US"(any IPv4)"
+ : ipa->address;
if (daemon_startup_retries <= 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"socket bind() to port %d for address %s failed: %s: "
}
DEBUG(D_any)
- {
if (wildcard)
debug_printf("listening on all interfaces (IPv%c) port %d\n",
- (af == AF_INET6)? '6' : '4', ipa->port);
+ af == AF_INET6 ? '6' : '4', ipa->port);
else
debug_printf("listening on %s port %d\n", ipa->address, ipa->port);
+
+#if defined(TCP_FASTOPEN) && !defined(__APPLE__)
+ if ( f.tcp_fastopen_ok
+ && setsockopt(listen_sockets[sk], IPPROTO_TCP, TCP_FASTOPEN,
+ &smtp_connect_backlog, sizeof(smtp_connect_backlog)))
+ {
+ DEBUG(D_any) debug_printf("setsockopt FASTOPEN: %s\n", strerror(errno));
+ f.tcp_fastopen_ok = FALSE;
}
+#endif
/* Start listening on the bound socket, establishing the maximum backlog of
connections that is allowed. On success, continue to the next address. */
- if (listen(listen_sockets[sk], smtp_connect_backlog) >= 0) continue;
+ if (listen(listen_sockets[sk], smtp_connect_backlog) >= 0)
+ {
+#if defined(TCP_FASTOPEN) && defined(__APPLE__)
+ if ( f.tcp_fastopen_ok
+ && setsockopt(listen_sockets[sk], IPPROTO_TCP, TCP_FASTOPEN,
+ &on, sizeof(on)))
+ {
+ DEBUG(D_any) debug_printf("setsockopt FASTOPEN: %s\n", strerror(errno));
+ f.tcp_fastopen_ok = FALSE;
+ }
+#endif
+ continue;
+ }
/* Listening has failed. In an IPv6 environment, as for bind(), if listen()
fails with the error EADDRINUSE and we are doing IPv4 wildcard listening
if (!check_special_case(errno, addresses, ipa, TRUE))
log_write(0, LOG_PANIC_DIE, "listen() failed on interface %s: %s",
- wildcard? ((af == AF_INET6)? US"(any IPv6)" : US"(any IPv4)") :
- ipa->address,
+ wildcard
+ ? af == AF_INET6 ? US"(any IPv6)" : US"(any IPv4)" : ipa->address,
strerror(errno));
DEBUG(D_any) debug_printf("wildcard IPv4 listen() failed after IPv6 "
are going to ignore. We remove the address from the chain, and back up the
counts. */
- SKIP_SOCKET:
+ SKIP_SOCKET:
sk--; /* Back up the count */
listen_socket_count--; /* Reduce the total */
if (ipa == addresses) addresses = ipa->next; else
/* If we are not listening, we want to write a pid file only if -oP was
explicitly given. */
-else if (override_pid_file_path == NULL) write_pid = FALSE;
+else if (!override_pid_file_path)
+ write_pid = FALSE;
/* Write the pid to a known file for assistance in identification, if required.
We do this before giving up root privilege, because on some systems it is
The variable daemon_write_pid is used to control this. */
-if (running_in_test_harness || write_pid)
+if (f.running_in_test_harness || write_pid)
{
FILE *f;
- if (override_pid_file_path != NULL)
- pid_file_path = override_pid_file_path;
-
- if (pid_file_path[0] == 0)
- pid_file_path = string_sprintf("%s/exim-daemon.pid", spool_directory);
-
- f = modefopen(pid_file_path, "wb", 0644);
- if (f != NULL)
+ set_pid_file_path();
+ if ((f = modefopen(pid_file_path, "wb", 0644)))
{
(void)fprintf(f, "%d\n", (int)getpid());
(void)fclose(f);
DEBUG(D_any) debug_printf("pid written to %s\n", pid_file_path);
}
else
- {
DEBUG(D_any)
debug_printf("%s\n", string_open_failed(errno, "pid file %s",
pid_file_path));
- }
}
/* Set up the handler for SIGHUP, which causes a restart of the daemon. */
originator_uid = exim_uid;
originator_gid = exim_gid;
-originator_login = ((pw = getpwuid(exim_uid)) != NULL)?
- string_copy_malloc(US pw->pw_name) : US"exim";
+originator_login = (pw = getpwuid(exim_uid))
+ ? string_copy_perm(US pw->pw_name, FALSE) : US"exim";
/* Get somewhere to keep the list of queue-runner pids if we are keeping track
of them (and also if we are doing queue runs). */
-if (queue_interval > 0 && queue_run_max > 0)
+if (queue_interval > 0 && local_queue_run_max > 0)
{
- int i;
- queue_pid_slots = store_get(queue_run_max * sizeof(pid_t));
- for (i = 0; i < queue_run_max; i++) queue_pid_slots[i] = 0;
+ queue_pid_slots = store_get(local_queue_run_max * sizeof(pid_t), FALSE);
+ for (int i = 0; i < local_queue_run_max; i++) queue_pid_slots[i] = 0;
}
-/* Set up the handler for termination of child processes. */
+/* Set up the handler for termination of child processes, and the one
+telling us to die. */
sigchld_seen = FALSE;
os_non_restarting_signal(SIGCHLD, main_sigchld_handler);
+sigterm_seen = FALSE;
+os_non_restarting_signal(SIGTERM, main_sigterm_handler);
+
/* If we are to run the queue periodically, pretend the alarm has just gone
off. This will cause the first queue-runner to get kicked off straight away. */
/* Log the start up of a daemon - at least one of listening or queue running
must be set up. */
-if (inetd_wait_mode)
+if (f.inetd_wait_mode)
{
uschar *p = big_buffer;
set_process_info("daemon(%s): pre-listening socket", version_string);
/* set up the timeout logic */
- sigalrm_seen = 1;
+ sigalrm_seen = TRUE;
}
-else if (daemon_listen)
+else if (f.daemon_listen)
{
- int i, j;
int smtp_ports = 0;
int smtps_ports = 0;
- ip_address_item *ipa;
- uschar *p = big_buffer;
- uschar *qinfo = (queue_interval > 0)?
- string_sprintf("-q%s", readconf_printtime(queue_interval))
- :
- US"no queue runs";
+ ip_address_item * ipa;
+ uschar * p;
+ uschar * qinfo = queue_interval > 0
+ ? string_sprintf("-q%s%s",
+ f.queue_2stage ? "q" : "", readconf_printtime(queue_interval))
+ : US"no queue runs";
/* Build a list of listening addresses in big_buffer, but limit it to 10
items. The style is for backwards compatibility.
deprecated protocol that starts TLS without using STARTTLS), and others
listening for standard SMTP. Keep their listings separate. */
- for (j = 0; j < 2; j++)
+ for (int j = 0, i; j < 2; j++)
+ {
+ for (i = 0, ipa = addresses; i < 10 && ipa; i++, ipa = ipa->next)
+ {
+ /* First time round, look for SMTP ports; second time round, look for
+ SMTPS ports. Build IP+port strings. */
+
+ if (host_is_tls_on_connect_port(ipa->port) == (j > 0))
+ {
+ if (j == 0)
+ smtp_ports++;
+ else
+ smtps_ports++;
+
+ /* Now the information about the port (and sometimes interface) */
+
+ if (ipa->address[0] == ':' && ipa->address[1] == 0)
+ { /* v6 wildcard */
+ if (ipa->next && ipa->next->address[0] == 0 &&
+ ipa->next->port == ipa->port)
+ {
+ ipa->log = string_sprintf(" port %d (IPv6 and IPv4)", ipa->port);
+ (ipa = ipa->next)->log = NULL;
+ }
+ else if (ipa->v6_include_v4)
+ ipa->log = string_sprintf(" port %d (IPv6 with IPv4)", ipa->port);
+ else
+ ipa->log = string_sprintf(" port %d (IPv6)", ipa->port);
+ }
+ else if (ipa->address[0] == 0) /* v4 wildcard */
+ ipa->log = string_sprintf(" port %d (IPv4)", ipa->port);
+ else /* check for previously-seen IP */
+ {
+ ip_address_item * i2;
+ for (i2 = addresses; i2 != ipa; i2 = i2->next)
+ if ( host_is_tls_on_connect_port(i2->port) == (j > 0)
+ && Ustrcmp(ipa->address, i2->address) == 0
+ )
+ { /* found; append port to list */
+ for (p = i2->log; *p; ) p++; /* end of existing string */
+ if (*--p == '}') *p = '\0'; /* drop EOL */
+ while (isdigit(*--p)) ; /* char before port */
+
+ i2->log = *p == ':' /* no list yet? */
+ ? string_sprintf("%.*s{%s,%d}",
+ (int)(p - i2->log + 1), i2->log, p+1, ipa->port)
+ : string_sprintf("%s,%d}", i2->log, ipa->port);
+ ipa->log = NULL;
+ break;
+ }
+ if (i2 == ipa) /* first-time IP */
+ ipa->log = string_sprintf(" [%s]:%d", ipa->address, ipa->port);
+ }
+ }
+ }
+ }
+
+ p = big_buffer;
+ for (int j = 0, i; j < 2; j++)
{
- for (i = 0, ipa = addresses; i < 10 && ipa != NULL; i++, ipa = ipa->next)
- {
- /* First time round, look for SMTP ports; second time round, look for
- SMTPS ports. For the first one of each, insert leading text. */
-
- if (host_is_tls_on_connect_port(ipa->port) == (j > 0))
- {
- if (j == 0)
- {
- if (smtp_ports++ == 0)
- {
- memcpy(p, "SMTP on", 8);
- p += 7;
- }
- }
- else
- {
- if (smtps_ports++ == 0)
- {
- (void)sprintf(CS p, "%sSMTPS on",
- (smtp_ports == 0)? "":" and for ");
- while (*p != 0) p++;
- }
- }
-
- /* Now the information about the port (and sometimes interface) */
-
- if (ipa->address[0] == ':' && ipa->address[1] == 0)
- {
- if (ipa->next != NULL && ipa->next->address[0] == 0 &&
- ipa->next->port == ipa->port)
- {
- (void)sprintf(CS p, " port %d (IPv6 and IPv4)", ipa->port);
- ipa = ipa->next;
- }
- else if (ipa->v6_include_v4)
- (void)sprintf(CS p, " port %d (IPv6 with IPv4)", ipa->port);
- else
- (void)sprintf(CS p, " port %d (IPv6)", ipa->port);
- }
- else if (ipa->address[0] == 0)
- (void)sprintf(CS p, " port %d (IPv4)", ipa->port);
- else
- (void)sprintf(CS p, " [%s]:%d", ipa->address, ipa->port);
- while (*p != 0) p++;
- }
- }
-
- if (ipa != NULL)
+ /* First time round, look for SMTP ports; second time round, look for
+ SMTPS ports. For the first one of each, insert leading text. */
+
+ if (j == 0)
{
- memcpy(p, " ...", 5);
- p += 4;
+ if (smtp_ports > 0)
+ p += sprintf(CS p, "SMTP on");
}
+ else
+ if (smtps_ports > 0)
+ p += sprintf(CS p, "%sSMTPS on",
+ smtp_ports == 0 ? "" : " and for ");
+
+ /* Now the information about the port (and sometimes interface) */
+
+ for (i = 0, ipa = addresses; i < 10 && ipa; i++, ipa = ipa->next)
+ if (host_is_tls_on_connect_port(ipa->port) == (j > 0))
+ if (ipa->log)
+ p += sprintf(CS p, "%s", ipa->log);
+
+ if (ipa)
+ p += sprintf(CS p, " ...");
}
log_write(0, LOG_MAIN,
"exim %s daemon started: pid=%d, %s, listening for %s",
version_string, getpid(), qinfo, big_buffer);
- set_process_info("daemon(%s): %s, listening for %s", version_string, qinfo, big_buffer);
+ set_process_info("daemon(%s): %s, listening for %s",
+ version_string, qinfo, big_buffer);
}
else
{
+ uschar * s = *queue_name
+ ? string_sprintf("-qG%s/%s", queue_name, readconf_printtime(queue_interval))
+ : string_sprintf("-q%s", readconf_printtime(queue_interval));
log_write(0, LOG_MAIN,
- "exim %s daemon started: pid=%d, -q%s, not listening for SMTP",
- version_string, getpid(), readconf_printtime(queue_interval));
- set_process_info("daemon(%s): -q%s, not listening",
- version_string,
- readconf_printtime(queue_interval));
+ "exim %s daemon started: pid=%d, %s, not listening for SMTP",
+ version_string, getpid(), s);
+ set_process_info("daemon(%s): %s, not listening", version_string, s);
}
/* Do any work it might be useful to amortize over our children
(eg: compile regex) */
dns_pattern_init();
+smtp_deliver_init(); /* Used for callouts */
+
+#ifndef DISABLE_DKIM
+ {
+# ifdef MEASURE_TIMING
+ struct timeval t0;
+ gettimeofday(&t0, NULL);
+# endif
+ dkim_exim_init();
+# ifdef MEASURE_TIMING
+ report_time_since(&t0, US"dkim_exim_init (delta)");
+# endif
+ }
+#endif
#ifdef WITH_CONTENT_SCAN
malware_init();
#endif
+#ifdef SUPPORT_SPF
+spf_init();
+#endif
/* Close the log so it can be renamed and moved. In the few cases below where
this long-running process writes to the log (always exceptional conditions), it
smtp_input = TRUE;
+#ifdef MEASURE_TIMING
+report_time_since(×tamp_startup, US"daemon loop start"); /* testcase 0022 */
+#endif
+
/* Enter the never-ending loop... */
for (;;)
EXIM_SOCKLEN_T len;
pid_t pid;
+ if (sigterm_seen)
+ daemon_die(); /* Does not return */
+
/* This code is placed first in the loop, so that it gets obeyed at the
start, before the first wait, for the queue-runner case, so that the first
one can be started immediately.
}
sigalrm_seen = FALSE;
- alarm(resignal_interval);
+ ALARM(resignal_interval);
}
else
{
- DEBUG(D_any) debug_printf("SIGALRM received\n");
+ DEBUG(D_any) debug_printf("%s received\n",
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ *queuerun_msgid ? "qrun notification" :
+#endif
+ "SIGALRM");
/* Do a full queue run in a child process, if required, unless we already
have enough queue runners on the go. If we are not running as root, a
re-exec is required. */
- if (queue_interval > 0 &&
- (queue_run_max <= 0 || queue_run_count < queue_run_max))
+ if ( queue_interval > 0
+ && (local_queue_run_max <= 0 || queue_run_count < local_queue_run_max))
{
- if ((pid = fork()) == 0)
+ if ((pid = exim_fork(US"queue-runner")) == 0)
{
- int sk;
-
- DEBUG(D_any) debug_printf("Starting queue-runner: pid %d\n",
- (int)getpid());
-
/* Disable debugging if it's required only for the daemon process. We
leave the above message, because it ties up with the "child ended"
debugging messages. */
- if (debug_daemon) debug_selector = 0;
+ if (f.debug_daemon) debug_selector = 0;
/* Close any open listening sockets in the child */
- for (sk = 0; sk < listen_socket_count; sk++)
- (void)close(listen_sockets[sk]);
+ close_daemon_sockets(daemon_notifier_fd,
+ listen_sockets, listen_socket_count);
/* Reset SIGHUP and SIGCHLD in the child in both cases. */
signal(SIGHUP, SIG_DFL);
signal(SIGCHLD, SIG_DFL);
+ signal(SIGTERM, SIG_DFL);
/* Re-exec if privilege has been given up, unless deliver_drop_
privilege is set. Reset SIGALRM before exec(). */
{
uschar opt[8];
uschar *p = opt;
- uschar *extra[5];
+ uschar *extra[7];
int extracount = 1;
signal(SIGALRM, SIG_DFL);
*p++ = '-';
*p++ = 'q';
- if (queue_2stage) *p++ = 'q';
- if (queue_run_first_delivery) *p++ = 'i';
- if (queue_run_force) *p++ = 'f';
- if (deliver_force_thaw) *p++ = 'f';
- if (queue_run_local) *p++ = 'l';
+ if ( f.queue_2stage
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ && !*queuerun_msgid
+#endif
+ ) *p++ = 'q';
+ if (f.queue_run_first_delivery) *p++ = 'i';
+ if (f.queue_run_force) *p++ = 'f';
+ if (f.deliver_force_thaw) *p++ = 'f';
+ if (f.queue_run_local) *p++ = 'l';
*p = 0;
- extra[0] = opt;
+ extra[0] = *queue_name
+ ? string_sprintf("%sG%s", opt, queue_name) : opt;
+
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ if (*queuerun_msgid)
+ {
+ log_write(0, LOG_MAIN, "notify triggered queue run");
+ extra[extracount++] = queuerun_msgid; /* Trigger only the */
+ extra[extracount++] = queuerun_msgid; /* one message */
+ }
+#endif
/* If -R or -S were on the original command line, ensure they get
passed on. */
- if (deliver_selectstring != NULL)
+ if (deliver_selectstring)
{
- extra[extracount++] = deliver_selectstring_regex? US"-Rr" : US"-R";
+ extra[extracount++] = f.deliver_selectstring_regex ? US"-Rr" : US"-R";
extra[extracount++] = deliver_selectstring;
}
- if (deliver_selectstring_sender != NULL)
+ if (deliver_selectstring_sender)
{
- extra[extracount++] = deliver_selectstring_sender_regex?
- US"-Sr" : US"-S";
+ extra[extracount++] = f.deliver_selectstring_sender_regex
+ ? US"-Sr" : US"-S";
extra[extracount++] = deliver_selectstring_sender;
}
/* Overlay this process with a new execution. */
- (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, TRUE, extracount,
- extra[0], extra[1], extra[2], extra[3], extra[4]);
+ (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, FALSE, extracount,
+ extra[0], extra[1], extra[2], extra[3], extra[4], extra[5], extra[6]);
/* Control never returns here. */
}
/* No need to re-exec; SIGALRM remains set to the default handler */
- queue_run(NULL, NULL, FALSE);
- _exit(EXIT_SUCCESS);
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ if (*queuerun_msgid)
+ {
+ log_write(0, LOG_MAIN, "notify triggered queue run");
+ f.queue_2stage = FALSE;
+ queue_run(queuerun_msgid, queuerun_msgid, FALSE);
+ }
+ else
+#endif
+ queue_run(NULL, NULL, FALSE);
+ exim_underbar_exit(EXIT_SUCCESS);
}
if (pid < 0)
}
else
{
- int i;
- for (i = 0; i < queue_run_max; ++i)
- {
+ for (int i = 0; i < local_queue_run_max; ++i)
if (queue_pid_slots[i] <= 0)
{
queue_pid_slots[i] = pid;
queue_run_count++;
break;
}
- }
DEBUG(D_any) debug_printf("%d queue-runner process%s running\n",
- queue_run_count, (queue_run_count == 1)? "" : "es");
+ queue_run_count, queue_run_count == 1 ? "" : "es");
}
}
/* Reset the alarm clock */
sigalrm_seen = FALSE;
- alarm(queue_interval);
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ if (*queuerun_msgid)
+ *queuerun_msgid = 0;
+ else
+#endif
+ ALARM(queue_interval);
}
} /* sigalrm_seen */
new OS. In fact, the later addition of listening on specific interfaces only
requires this way of working anyway. */
- if (daemon_listen)
+ if (f.daemon_listen)
{
- int sk, lcount, select_errno;
+ int lcount, select_errno;
int max_socket = 0;
BOOL select_failed = FALSE;
fd_set select_listen;
FD_ZERO(&select_listen);
- for (sk = 0; sk < listen_socket_count; sk++)
+ if (daemon_notifier_fd >= 0)
+ FD_SET(daemon_notifier_fd, &select_listen);
+ for (int sk = 0; sk < listen_socket_count; sk++)
{
FD_SET(listen_sockets[sk], &select_listen);
if (listen_sockets[sk] > max_socket) max_socket = listen_sockets[sk];
errno = EINTR;
}
else
- {
lcount = select(max_socket + 1, (SELECT_ARG2_TYPE *)&select_listen,
NULL, NULL, NULL);
- }
if (lcount < 0)
{
handle_ending_processes();
errno = select_errno;
+#ifndef DISABLE_TLS
+ /* Create or rotate any required keys */
+ tls_daemon_init();
+#endif
+
/* Loop for all the sockets that are currently ready to go. If select
actually failed, we have set the count to 1 and select_failed=TRUE, so as
to use the common error code for select/accept below. */
while (lcount-- > 0)
{
int accept_socket = -1;
+
if (!select_failed)
- {
- for (sk = 0; sk < listen_socket_count; sk++)
- {
+ {
+ if ( daemon_notifier_fd >= 0
+ && FD_ISSET(daemon_notifier_fd, &select_listen))
+ {
+ FD_CLR(daemon_notifier_fd, &select_listen);
+ sigalrm_seen = daemon_notification();
+ break; /* to top of daemon loop */
+ }
+ for (int sk = 0; sk < listen_socket_count; sk++)
if (FD_ISSET(listen_sockets[sk], &select_listen))
{
len = sizeof(accepted);
FD_CLR(listen_sockets[sk], &select_listen);
break;
}
- }
- }
+ }
/* If select or accept has failed and this was not caused by an
interruption, log the incident and try again. With asymmetric TCP/IP
if (sighup_seen)
{
- int sk;
log_write(0, LOG_MAIN, "pid %d: SIGHUP received: re-exec daemon",
getpid());
- for (sk = 0; sk < listen_socket_count; sk++)
- (void)close(listen_sockets[sk]);
- alarm(0);
+ close_daemon_sockets(daemon_notifier_fd,
+ listen_sockets, listen_socket_count);
+ ALARM_CLR(0);
signal(SIGHUP, SIG_IGN);
sighup_argv[0] = exim_path;
exim_nullstd();
git://git.exim.org / users / jgh / exim.git / blobdiff