* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2009 */
+/* Copyright (c) University of Cambridge 1995 - 2014 */
/* See the file NOTICE for conditions of use and distribution. */
#include "../exim.h"
to be publicly visible; these are flagged with opt_public. */
optionlist smtp_transport_options[] = {
+ { "*expand_multi_domain", opt_stringptr | opt_hidden | opt_public,
+ (void *)offsetof(transport_instance, expand_multi_domain) },
+ { "*expand_retry_include_ip_address", opt_stringptr | opt_hidden,
+ (void *)(offsetof(smtp_transport_options_block, expand_retry_include_ip_address)) },
+
{ "address_retry_include_sender", opt_bool,
(void *)offsetof(smtp_transport_options_block, address_retry_include_sender) },
{ "allow_localhost", opt_bool,
(void *)offsetof(smtp_transport_options_block, dns_qualify_single) },
{ "dns_search_parents", opt_bool,
(void *)offsetof(smtp_transport_options_block, dns_search_parents) },
+ { "dnssec_request_domains", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dnssec_request_domains) },
+ { "dnssec_require_domains", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dnssec_require_domains) },
+ { "dscp", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dscp) },
{ "fallback_hosts", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, fallback_hosts) },
{ "final_timeout", opt_time,
{ "gethostbyname", opt_bool,
(void *)offsetof(smtp_transport_options_block, gethostbyname) },
#ifdef SUPPORT_TLS
+ /* These are no longer honoured, as of Exim 4.80; for now, we silently
+ ignore; 4.83 will warn, and a later-still release will remove
+ these options, so that using them becomes an error. */
{ "gnutls_require_kx", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, gnutls_require_kx) },
{ "gnutls_require_mac", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_override) },
{ "hosts_randomize", opt_bool,
(void *)offsetof(smtp_transport_options_block, hosts_randomize) },
+#if defined(SUPPORT_TLS) && !defined(DISABLE_OCSP)
+ { "hosts_request_ocsp", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_request_ocsp) },
+#endif
{ "hosts_require_auth", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_auth) },
#ifdef SUPPORT_TLS
+# ifdef EXPERIMENTAL_DANE
+ { "hosts_require_dane", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_require_dane) },
+# endif
+# ifndef DISABLE_OCSP
+ { "hosts_require_ocsp", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_require_ocsp) },
+# endif
{ "hosts_require_tls", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_tls) },
#endif
{ "hosts_try_auth", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_try_auth) },
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+ { "hosts_try_dane", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_try_dane) },
+#endif
+#ifndef DISABLE_PRDR
+ { "hosts_try_prdr", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_try_prdr) },
+#endif
+#ifdef SUPPORT_TLS
+ { "hosts_verify_avoid_tls", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_verify_avoid_tls) },
+#endif
{ "interface", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, interface) },
{ "keepalive", opt_bool,
(void *)offsetof(smtp_transport_options_block, lmtp_ignore_quota) },
{ "max_rcpt", opt_int | opt_public,
(void *)offsetof(transport_instance, max_addresses) },
- { "multi_domain", opt_bool | opt_public,
+ { "multi_domain", opt_expand_bool | opt_public,
(void *)offsetof(transport_instance, multi_domain) },
{ "port", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, port) },
{ "protocol", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, protocol) },
- { "retry_include_ip_address", opt_bool,
+ { "retry_include_ip_address", opt_expand_bool,
(void *)offsetof(smtp_transport_options_block, retry_include_ip_address) },
{ "serialize_hosts", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, serialize_hosts) },
(void *)offsetof(smtp_transport_options_block, tls_certificate) },
{ "tls_crl", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_crl) },
+ { "tls_dh_min_bits", opt_int,
+ (void *)offsetof(smtp_transport_options_block, tls_dh_min_bits) },
{ "tls_privatekey", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_privatekey) },
{ "tls_require_ciphers", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_sni) },
{ "tls_tempfail_tryclear", opt_bool,
(void *)offsetof(smtp_transport_options_block, tls_tempfail_tryclear) },
+ { "tls_try_verify_hosts", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, tls_try_verify_hosts) },
+ { "tls_verify_cert_hostnames", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block,tls_verify_cert_hostnames)},
{ "tls_verify_certificates", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) }
+ (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) },
+ { "tls_verify_hosts", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, tls_verify_hosts) }
#endif
};
NULL, /* interface */
NULL, /* port */
US"smtp", /* protocol */
+ NULL, /* DSCP */
NULL, /* serialize_hosts */
NULL, /* hosts_try_auth */
NULL, /* hosts_require_auth */
+#ifdef EXPERIMENTAL_DANE
+ NULL, /* hosts_try_dane */
+ NULL, /* hosts_require_dane */
+#endif
+#ifndef DISABLE_PRDR
+ US"*", /* hosts_try_prdr */
+#endif
+#ifndef DISABLE_OCSP
+ US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
+ NULL, /* hosts_require_ocsp */
+#endif
NULL, /* hosts_require_tls */
NULL, /* hosts_avoid_tls */
+ US"*", /* hosts_verify_avoid_tls */
NULL, /* hosts_avoid_pipelining */
NULL, /* hosts_avoid_esmtp */
NULL, /* hosts_nopass_tls */
FALSE, /* gethostbyname */
TRUE, /* dns_qualify_single */
FALSE, /* dns_search_parents */
+ NULL, /* dnssec_request_domains */
+ NULL, /* dnssec_require_domains */
TRUE, /* delay_after_cutoff */
FALSE, /* hosts_override */
FALSE, /* hosts_randomize */
TRUE, /* keepalive */
FALSE, /* lmtp_ignore_quota */
+ NULL, /* expand_retry_include_ip_address */
TRUE /* retry_include_ip_address */
#ifdef SUPPORT_TLS
,NULL, /* tls_certificate */
NULL, /* gnutls_require_kx */
NULL, /* gnutls_require_mac */
NULL, /* gnutls_require_proto */
- NULL, /* tls_verify_certificates */
+ NULL, /* tls_sni */
+ US"system", /* tls_verify_certificates */
+ EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
+ /* tls_dh_min_bits */
TRUE, /* tls_tempfail_tryclear */
- NULL /* tls_sni */
+ NULL, /* tls_verify_hosts */
+ US"*", /* tls_try_verify_hosts */
+ US"*" /* tls_verify_cert_hostnames */
#endif
#ifndef DISABLE_DKIM
,NULL, /* dkim_canon */
#endif
};
+/* some DSN flags for use later */
+
+static int rf_list[] = {rf_notify_never, rf_notify_success,
+ rf_notify_failure, rf_notify_delay };
+
+static uschar *rf_names[] = { US"NEVER", US"SUCCESS", US"FAILURE", US"DELAY" };
+
+
/* Local statics */
for them, but do not do any lookups at this time. */
host_build_hostlist(&(ob->fallback_hostlist), ob->fallback_hosts, FALSE);
+
+#ifdef SUPPORT_TLS
+if ( ob->gnutls_require_kx
+ || ob->gnutls_require_mac
+ || ob->gnutls_require_proto)
+ log_write(0, LOG_MAIN, "WARNING: smtp transport options"
+ " gnutls_require_kx, gnutls_require_mac and gnutls_require_protocols"
+ " are obsolete\n");
+#endif
}
msg to put in each address's message field
rc to put in each address's transport_return field
pass_message if TRUE, set the "pass message" flag in the address
+ host if set, mark addrs as having used this host
If errno_value has the special value ERRNO_CONNECTTIMEOUT, ETIMEDOUT is put in
the errno field, and RTEF_CTOUT is ORed into the more_errno field, to indicate
static void
set_errno(address_item *addrlist, int errno_value, uschar *msg, int rc,
- BOOL pass_message)
+ BOOL pass_message, host_item * host)
{
address_item *addr;
int orvalue = 0;
orvalue = RTEF_CTOUT;
}
for (addr = addrlist; addr != NULL; addr = addr->next)
- {
- if (addr->transport_return < PENDING) continue;
- addr->basic_errno = errno_value;
- addr->more_errno |= orvalue;
- if (msg != NULL)
+ if (addr->transport_return >= PENDING)
{
- addr->message = msg;
- if (pass_message) setflag(addr, af_pass_message);
+ addr->basic_errno = errno_value;
+ addr->more_errno |= orvalue;
+ if (msg != NULL)
+ {
+ addr->message = msg;
+ if (pass_message) setflag(addr, af_pass_message);
+ }
+ addr->transport_return = rc;
+ if (host)
+ addr->host_used = host;
}
- addr->transport_return = rc;
- }
}
Returns: TRUE if an SMTP "QUIT" command should be sent, else FALSE
*/
-static BOOL check_response(host_item *host, int *errno_value, int more_errno,
+static BOOL
+check_response(host_item *host, int *errno_value, int more_errno,
uschar *buffer, int *yield, uschar **message, BOOL *pass_message)
{
uschar *pl = US"";
if (*errno_value == ETIMEDOUT)
{
- *message = US string_sprintf("SMTP timeout while connected to %s [%s] "
- "after %s%s", host->name, host->address, pl, smtp_command);
+ *message = US string_sprintf("SMTP timeout after %s%s",
+ pl, smtp_command);
if (transport_count > 0)
*message = US string_sprintf("%s (%d bytes written)", *message,
transport_count);
{
uschar *malfresp = string_printing(buffer);
while (isspace(*malfresp)) malfresp++;
- if (*malfresp == 0)
- *message = string_sprintf("Malformed SMTP reply (an empty line) from "
- "%s [%s] in response to %s%s", host->name, host->address, pl,
- smtp_command);
- else
- *message = string_sprintf("Malformed SMTP reply from %s [%s] in response "
- "to %s%s: %s", host->name, host->address, pl, smtp_command, malfresp);
+ *message = *malfresp == 0
+ ? string_sprintf("Malformed SMTP reply (an empty line) "
+ "in response to %s%s", pl, smtp_command)
+ : string_sprintf("Malformed SMTP reply in response to %s%s: %s",
+ pl, smtp_command, malfresp);
return FALSE;
}
{
uschar *s = string_printing(buffer);
*message = US string_sprintf("SMTP error from remote mail server after %s%s: "
- "host %s [%s]: %s", pl, smtp_command, host->name, host->address, s);
+ "%s", pl, smtp_command, s);
*pass_message = TRUE;
*yield = buffer[0];
return TRUE;
if (*errno_value == 0 || *errno_value == ECONNRESET)
{
*errno_value = ERRNO_SMTPCLOSED;
- *message = US string_sprintf("Remote host %s [%s] closed connection "
- "in response to %s%s", host->name, host->address, pl, smtp_command);
+ *message = US string_sprintf("Remote host closed connection "
+ "in response to %s%s", pl, smtp_command);
}
else *message = US string_sprintf("%s [%s]", host->name, host->address);
static void
write_logs(address_item *addr, host_item *host)
{
-if (addr->message != NULL)
+uschar * message = string_sprintf("H=%s [%s]", host->name, host->address);
+
+if (addr->message)
{
- uschar *message = addr->message;
+ message = string_sprintf("%s: %s", message, addr->message);
if (addr->basic_errno > 0)
message = string_sprintf("%s: %s", message, strerror(addr->basic_errno));
log_write(0, LOG_MAIN, "%s", message);
}
else
{
- uschar *msg =
- ((log_extra_selector & LX_outgoing_port) != 0)?
- string_sprintf("%s [%s]:%d", host->name, host->address,
- (host->port == PORT_NONE)? 25 : host->port)
- :
- string_sprintf("%s [%s]", host->name, host->address);
- log_write(0, LOG_MAIN, "%s %s", msg, strerror(addr->basic_errno));
- deliver_msglog("%s %s %s\n", tod_stamp(tod_log), msg,
- strerror(addr->basic_errno));
+ if (log_extra_selector & LX_outgoing_port)
+ message = string_sprintf("%s:%d", message,
+ host->port == PORT_NONE ? 25 : host->port);
+ log_write(0, LOG_MAIN, "%s %s", message, strerror(addr->basic_errno));
+ deliver_msglog("%s %s %s\n", tod_stamp(tod_log), message,
+ strerror(addr->basic_errno));
}
}
+static void
+msglog_line(host_item * host, uschar * message)
+{
+ deliver_msglog("%s H=%s [%s] %s\n", tod_stamp(tod_log),
+ host->name, host->address, message);
+}
+
+
+
+#ifdef EXPERIMENTAL_EVENT
+/*************************************************
+* Post-defer action *
+*************************************************/
+
+/* This expands an arbitrary per-transport string.
+ It might, for example, be used to write to the database log.
+
+Arguments:
+ addr the address item containing error information
+ host the current host
+
+Returns: nothing
+*/
+
+static void
+deferred_event_raise(address_item *addr, host_item *host)
+{
+uschar * action = addr->transport->event_action;
+uschar * save_domain;
+uschar * save_local;
+
+if (!action)
+ return;
+
+save_domain = deliver_domain;
+save_local = deliver_localpart;
+
+/*XXX would ip & port already be set up? */
+deliver_host_address = string_copy(host->address);
+deliver_host_port = host->port == PORT_NONE ? 25 : host->port;
+event_defer_errno = addr->basic_errno;
+
+router_name = addr->router->name;
+transport_name = addr->transport->name;
+deliver_domain = addr->domain;
+deliver_localpart = addr->local_part;
+
+(void) event_raise(action, US"msg:host:defer",
+ addr->message
+ ? addr->basic_errno > 0
+ ? string_sprintf("%s: %s", addr->message, strerror(addr->basic_errno))
+ : string_copy(addr->message)
+ : addr->basic_errno > 0
+ ? string_copy(US strerror(addr->basic_errno))
+ : NULL);
+
+deliver_localpart = save_local;
+deliver_domain = save_domain;
+router_name = transport_name = NULL;
+}
+#endif
+
/*************************************************
}
errno = save_errno;
}
+
+ if (pending_DATA) count--; /* Number of RCPT responses to come */
+ while (count-- > 0) /* Mark any pending addrs with the host used */
+ {
+ while (addr->transport_return != PENDING_DEFER) addr = addr->next;
+ addr->host_used = host;
+ addr = addr->next;
+ }
return -3;
}
}
while (addr->transport_return != PENDING_DEFER) addr = addr->next;
/* The address was accepted */
+ addr->host_used = host;
if (smtp_read_response(inblock, buffer, buffsize, '2', timeout))
{
else if (errno == ETIMEDOUT)
{
- int save_errno = errno;
- uschar *message = string_sprintf("SMTP timeout while connected to %s [%s] "
- "after RCPT TO:<%s>", host->name, host->address,
- transport_rcpt_address(addr, include_affixes));
- set_errno(addrlist, save_errno, message, DEFER, FALSE);
+ uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>",
+ transport_rcpt_address(addr, include_affixes));
+ set_errno(addrlist, ETIMEDOUT, message, DEFER, FALSE, NULL);
retry_add_item(addr, addr->address_retry_key, 0);
update_waiting = FALSE;
return -1;
{
addr->message =
string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: "
- "host %s [%s]: %s", transport_rcpt_address(addr, include_affixes),
- host->name, host->address, string_printing(buffer));
+ "%s", transport_rcpt_address(addr, include_affixes),
+ string_printing(buffer));
setflag(addr, af_pass_message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), addr->message);
+ msglog_line(host, addr->message);
/* The response was 5xx */
addr->basic_errno = ERRNO_RCPT4XX;
addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
- /* Log temporary errors if there are more hosts to be tried. */
+ /* Log temporary errors if there are more hosts to be tried.
+ If not, log this last one in the == line. */
- if (host->next != NULL) log_write(0, LOG_MAIN, "%s", addr->message);
+ if (host->next)
+ log_write(0, LOG_MAIN, "H=%s [%s]: %s", host->name, host->address, addr->message);
/* Do not put this message on the list of those waiting for specific
hosts, as otherwise it is likely to be tried too often. */
+/* Do the client side of smtp-level authentication */
+/*
+Arguments:
+ buffer EHLO response from server (gets overwritten)
+ addrlist chain of potential addresses to deliver
+ host host to deliver to
+ ob transport options
+ ibp, obp comms channel control blocks
+
+Returns:
+ OK Success, or failed (but not required): global "smtp_authenticated" set
+ DEFER Failed authentication (and was required)
+ ERROR Internal problem
+
+ FAIL_SEND Failed communications - transmit
+ FAIL - response
+*/
+
+int
+smtp_auth(uschar *buffer, unsigned bufsize, address_item *addrlist, host_item *host,
+ smtp_transport_options_block *ob, BOOL is_esmtp,
+ smtp_inblock *ibp, smtp_outblock *obp)
+{
+int require_auth;
+uschar *fail_reason = US"server did not advertise AUTH support";
+
+smtp_authenticated = FALSE;
+client_authenticator = client_authenticated_id = client_authenticated_sender = NULL;
+require_auth = verify_check_given_host(&ob->hosts_require_auth, host);
+
+if (is_esmtp && !regex_AUTH) regex_AUTH =
+ regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)",
+ FALSE, TRUE);
+
+if (is_esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+ {
+ uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
+ expand_nmax = -1; /* reset */
+
+ /* Must not do this check until after we have saved the result of the
+ regex match above. */
+
+ if (require_auth == OK ||
+ verify_check_given_host(&ob->hosts_try_auth, host) == OK)
+ {
+ auth_instance *au;
+ fail_reason = US"no common mechanisms were found";
+
+ DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
+
+ /* Scan the configured authenticators looking for one which is configured
+ for use as a client, which is not suppressed by client_condition, and
+ whose name matches an authentication mechanism supported by the server.
+ If one is found, attempt to authenticate by calling its client function.
+ */
+
+ for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
+ {
+ uschar *p = names;
+ if (!au->client ||
+ (au->client_condition != NULL &&
+ !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator")))
+ {
+ DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
+ au->name,
+ (au->client)? "client_condition is false" :
+ "not configured as a client");
+ continue;
+ }
+
+ /* Loop to scan supported server mechanisms */
+
+ while (*p != 0)
+ {
+ int rc;
+ int len = Ustrlen(au->public_name);
+ while (isspace(*p)) p++;
+
+ if (strncmpic(au->public_name, p, len) != 0 ||
+ (p[len] != 0 && !isspace(p[len])))
+ {
+ while (*p != 0 && !isspace(*p)) p++;
+ continue;
+ }
+
+ /* Found data for a listed mechanism. Call its client entry. Set
+ a flag in the outblock so that data is overwritten after sending so
+ that reflections don't show it. */
+
+ fail_reason = US"authentication attempt(s) failed";
+ obp->authenticating = TRUE;
+ rc = (au->info->clientcode)(au, ibp, obp,
+ ob->command_timeout, buffer, bufsize);
+ obp->authenticating = FALSE;
+ DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
+ au->name, rc);
+
+ /* A temporary authentication failure must hold up delivery to
+ this host. After a permanent authentication failure, we carry on
+ to try other authentication methods. If all fail hard, try to
+ deliver the message unauthenticated unless require_auth was set. */
+
+ switch(rc)
+ {
+ case OK:
+ smtp_authenticated = TRUE; /* stops the outer loop */
+ client_authenticator = au->name;
+ if (au->set_client_id != NULL)
+ client_authenticated_id = expand_string(au->set_client_id);
+ break;
+
+ /* Failure after writing a command */
+
+ case FAIL_SEND:
+ return FAIL_SEND;
+
+ /* Failure after reading a response */
+
+ case FAIL:
+ if (errno != 0 || buffer[0] != '5') return FAIL;
+ log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
+ au->name, host->name, host->address, buffer);
+ break;
+
+ /* Failure by some other means. In effect, the authenticator
+ decided it wasn't prepared to handle this case. Typically this
+ is the result of "fail" in an expansion string. Do we need to
+ log anything here? Feb 2006: a message is now put in the buffer
+ if logging is required. */
+
+ case CANCELLED:
+ if (*buffer != 0)
+ log_write(0, LOG_MAIN, "%s authenticator cancelled "
+ "authentication H=%s [%s] %s", au->name, host->name,
+ host->address, buffer);
+ break;
+
+ /* Internal problem, message in buffer. */
+
+ case ERROR:
+ set_errno(addrlist, ERRNO_AUTHPROB, string_copy(buffer),
+ DEFER, FALSE, NULL);
+ return ERROR;
+ }
+
+ break; /* If not authenticated, try next authenticator */
+ } /* Loop for scanning supported server mechanisms */
+ } /* Loop for further authenticators */
+ }
+ }
+
+/* If we haven't authenticated, but are required to, give up. */
+
+if (require_auth == OK && !smtp_authenticated)
+ {
+ set_errno(addrlist, ERRNO_AUTHFAIL,
+ string_sprintf("authentication required but %s", fail_reason), DEFER,
+ FALSE, NULL);
+ return DEFER;
+ }
+
+return OK;
+}
+
+
+/* Construct AUTH appendix string for MAIL TO */
+/*
+Arguments
+ buffer to build string
+ addrlist chain of potential addresses to deliver
+ ob transport options
+
+Globals smtp_authenticated
+ client_authenticated_sender
+Return True on error, otherwise buffer has (possibly empty) terminated string
+*/
+
+BOOL
+smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist,
+ smtp_transport_options_block *ob)
+{
+uschar *local_authenticated_sender = authenticated_sender;
+
+#ifdef notdef
+ debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, smtp_authenticated?"Y":"N");
+#endif
+
+if (ob->authenticated_sender != NULL)
+ {
+ uschar *new = expand_string(ob->authenticated_sender);
+ if (new == NULL)
+ {
+ if (!expand_string_forcedfail)
+ {
+ uschar *message = string_sprintf("failed to expand "
+ "authenticated_sender: %s", expand_string_message);
+ set_errno(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, NULL);
+ return TRUE;
+ }
+ }
+ else if (new[0] != 0) local_authenticated_sender = new;
+ }
+
+/* Add the authenticated sender address if present */
+
+if ((smtp_authenticated || ob->authenticated_sender_force) &&
+ local_authenticated_sender != NULL)
+ {
+ string_format(buffer, bufsize, " AUTH=%s",
+ auth_xtextencode(local_authenticated_sender,
+ Ustrlen(local_authenticated_sender)));
+ client_authenticated_sender = string_copy(local_authenticated_sender);
+ }
+else
+ *buffer= 0;
+
+return FALSE;
+}
+
+
+
+#ifdef EXPERIMENTAL_DANE
+int
+tlsa_lookup(host_item * host, dns_answer * dnsa,
+ BOOL dane_required, BOOL * dane)
+{
+/* move this out to host.c given the similarity to dns_lookup() ? */
+uschar buffer[300];
+uschar * fullname = buffer;
+
+/* TLSA lookup string */
+(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name);
+
+switch (dns_lookup(dnsa, buffer, T_TLSA, &fullname))
+ {
+ case DNS_AGAIN:
+ return DEFER; /* just defer this TLS'd conn */
+
+ default:
+ case DNS_FAIL:
+ if (dane_required)
+ {
+ log_write(0, LOG_MAIN, "DANE error: TLSA lookup failed");
+ return FAIL;
+ }
+ break;
+
+ case DNS_SUCCEED:
+ if (!dns_is_secure(dnsa))
+ {
+ log_write(0, LOG_MAIN, "DANE error: TLSA lookup not DNSSEC");
+ return DEFER;
+ }
+ *dane = TRUE;
+ break;
+ }
+return OK;
+}
+#endif
+
+
/*************************************************
* Deliver address list to given host *
*************************************************/
BOOL esmtp = TRUE;
BOOL pending_MAIL;
BOOL pass_message = FALSE;
+#ifndef DISABLE_PRDR
+BOOL prdr_offered = FALSE;
+BOOL prdr_active;
+#endif
+BOOL dsn_all_lasthop = TRUE;
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+BOOL dane = FALSE;
+dns_answer tlsa_dnsa;
+#endif
smtp_inblock inblock;
smtp_outblock outblock;
int max_rcpt = tblock->max_addresses;
uschar *igquotstr = US"";
-uschar *local_authenticated_sender = authenticated_sender;
uschar *helo_data = NULL;
uschar *message = NULL;
uschar new_message_id[MESSAGE_ID_LENGTH + 1];
uschar *p;
uschar buffer[4096];
uschar inbuffer[4096];
-uschar outbuffer[1024];
+uschar outbuffer[4096];
suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */
/* Reset the parameters of a TLS session. */
-tls_bits = 0;
-tls_cipher = NULL;
-tls_peerdn = NULL;
+tls_out.bits = 0;
+tls_out.cipher = NULL; /* the one we may use for this transport */
+tls_out.ourcert = NULL;
+tls_out.peercert = NULL;
+tls_out.peerdn = NULL;
#if defined(SUPPORT_TLS) && !defined(USE_GNUTLS)
-tls_sni = NULL;
+tls_out.sni = NULL;
#endif
+tls_out.ocsp = OCSP_NOT_REQ;
-/* If an authenticated_sender override has been specified for this transport
-instance, expand it. If the expansion is forced to fail, and there was already
-an authenticated_sender for this message, the original value will be used.
-Other expansion failures are serious. An empty result is ignored, but there is
-otherwise no check - this feature is expected to be used with LMTP and other
-cases where non-standard addresses (e.g. without domains) might be required. */
+/* Flip the legacy TLS-related variables over to the outbound set in case
+they're used in the context of the transport. Don't bother resetting
+afterward as we're in a subprocess. */
-if (ob->authenticated_sender != NULL)
- {
- uschar *new = expand_string(ob->authenticated_sender);
- if (new == NULL)
- {
- if (!expand_string_forcedfail)
- {
- uschar *message = string_sprintf("failed to expand "
- "authenticated_sender: %s", expand_string_message);
- set_errno(addrlist, 0, message, DEFER, FALSE);
- return ERROR;
- }
- }
- else if (new[0] != 0) local_authenticated_sender = new;
- }
+tls_modify_variables(&tls_out);
#ifndef SUPPORT_TLS
if (smtps)
{
- set_errno(addrlist, 0, US"TLS support not available", DEFER, FALSE);
- return ERROR;
+ set_errno(addrlist, ERRNO_TLSFAILURE, US"TLS support not available",
+ DEFER, FALSE, NULL);
+ return ERROR;
}
#endif
if (continue_hostname == NULL)
{
+ /* This puts port into host->port */
inblock.sock = outblock.sock =
smtp_connect(host, host_af, port, interface, ob->connect_timeout,
- ob->keepalive); /* This puts port into host->port */
+ ob->keepalive, ob->dscp
+#ifdef EXPERIMENTAL_EVENT
+ , tblock->event_action
+#endif
+ );
if (inblock.sock < 0)
{
set_errno(addrlist, (errno == ETIMEDOUT)? ERRNO_CONNECTTIMEOUT : errno,
- NULL, DEFER, FALSE);
+ NULL, DEFER, FALSE, NULL);
return DEFER;
}
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+ {
+ BOOL dane_required;
+
+ tls_out.dane_verified = FALSE;
+ tls_out.tlsa_usage = 0;
+
+ dane_required = verify_check_given_host(&ob->hosts_require_dane, host) == OK;
+
+ if (host->dnssec == DS_YES)
+ {
+ if( dane_required
+ || verify_check_given_host(&ob->hosts_try_dane, host) == OK
+ )
+ if ((rc = tlsa_lookup(host, &tlsa_dnsa, dane_required, &dane)) != OK)
+ return rc;
+ }
+ else if (dane_required)
+ {
+ log_write(0, LOG_MAIN, "DANE error: %s lookup not DNSSEC", host->name);
+ return FAIL;
+ }
+
+ if (dane)
+ ob->tls_tempfail_tryclear = FALSE;
+ }
+#endif /*DANE*/
+
/* Expand the greeting message while waiting for the initial response. (Makes
sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is
delayed till here so that $sending_interface and $sending_port are set. */
if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
ob->command_timeout)) goto RESPONSE_FAILED;
+#ifdef EXPERIMENTAL_EVENT
+ {
+ uschar * s;
+ lookup_dnssec_authenticated = host->dnssec==DS_YES ? US"yes"
+ : host->dnssec==DS_NO ? US"no" : NULL;
+ s = event_raise(tblock->event_action, US"smtp:connect", buffer);
+ if (s)
+ {
+ set_errno(addrlist, ERRNO_EXPANDFAIL,
+ string_sprintf("deferred by smtp:connect event expansion: %s", s),
+ DEFER, FALSE, NULL);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ }
+#endif
+
/* Now check if the helo_data expansion went well, and sign off cleanly if
it didn't. */
{
uschar *message = string_sprintf("failed to expand helo_data: %s",
expand_string_message);
- set_errno(addrlist, 0, message, DEFER, FALSE);
+ set_errno(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, NULL);
yield = DEFER;
goto SEND_QUIT;
}
mailers use upper case for some reason (the RFC is quite clear about case
independence) so, for peace of mind, I gave in. */
- esmtp = verify_check_this_host(&(ob->hosts_avoid_esmtp), NULL,
- host->name, host->address, NULL) != OK;
+ esmtp = verify_check_given_host(&ob->hosts_avoid_esmtp, host) != OK;
/* Alas; be careful, since this goto is not an error-out, so conceivably
we might set data between here and the target which we assume to exist
and be usable. I can see this coming back to bite us. */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
if (smtps)
{
tls_offered = TRUE;
smtp_command = US"SSL-on-connect";
goto TLS_NEGOTIATE;
}
- #endif
+#endif
if (esmtp)
{
/* Set tls_offered if the response to EHLO specifies support for STARTTLS. */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
tls_offered = esmtp &&
pcre_exec(regex_STARTTLS, NULL, CS buffer, Ustrlen(buffer), 0,
PCRE_EOPT, NULL, 0) >= 0;
- #endif
+#endif
+
+#ifndef DISABLE_PRDR
+ prdr_offered = esmtp
+ && pcre_exec(regex_PRDR, NULL, CS buffer, Ustrlen(buffer), 0,
+ PCRE_EOPT, NULL, 0) >= 0
+ && verify_check_given_host(&ob->hosts_try_prdr, host) == OK;
+
+ if (prdr_offered)
+ {DEBUG(D_transport) debug_printf("PRDR usable\n");}
+#endif
}
/* For continuing deliveries down the same channel, the socket is the standard
for error analysis. */
#ifdef SUPPORT_TLS
-if (tls_offered && !suppress_tls &&
- verify_check_this_host(&(ob->hosts_avoid_tls), NULL, host->name,
- host->address, NULL) != OK)
+if ( tls_offered
+ && !suppress_tls
+ && verify_check_given_host(&ob->hosts_avoid_tls, host) != OK)
{
uschar buffer2[4096];
if (smtp_write_command(&outblock, FALSE, "STARTTLS\r\n") < 0)
else
TLS_NEGOTIATE:
{
- int rc = tls_client_start(inblock.sock,
- host,
- addrlist,
- NULL, /* No DH param */
- ob->tls_certificate,
- ob->tls_privatekey,
- ob->tls_sni,
- ob->tls_verify_certificates,
- ob->tls_crl,
- ob->tls_require_ciphers,
- ob->gnutls_require_mac,
- ob->gnutls_require_kx,
- ob->gnutls_require_proto,
- ob->command_timeout);
+ int rc = tls_client_start(inblock.sock, host, addrlist, tblock
+# ifdef EXPERIMENTAL_DANE
+ , dane ? &tlsa_dnsa : NULL
+# endif
+ );
/* TLS negotiation failed; give an error. From outside, this function may
be called again to try in clear on a new connection, if the options permit
/* TLS session is set up */
for (addr = addrlist; addr != NULL; addr = addr->next)
- {
if (addr->transport_return == PENDING_DEFER)
{
- addr->cipher = tls_cipher;
- addr->peerdn = tls_peerdn;
+ addr->cipher = tls_out.cipher;
+ addr->ourcert = tls_out.ourcert;
+ addr->peercert = tls_out.peercert;
+ addr->peerdn = tls_out.peerdn;
+ addr->ocsp = tls_out.ocsp;
}
- }
}
}
expand it here. $sending_ip_address and $sending_port are set up right at the
start of the Exim process (in exim.c). */
-if (tls_active >= 0)
+if (tls_out.active >= 0)
{
char *greeting_cmd;
if (helo_data == NULL)
{
uschar *message = string_sprintf("failed to expand helo_data: %s",
expand_string_message);
- set_errno(addrlist, 0, message, DEFER, FALSE);
+ set_errno(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, NULL);
yield = DEFER;
goto SEND_QUIT;
}
/* If the host is required to use a secure channel, ensure that we
have one. */
-else if (verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name,
- host->address, NULL) == OK)
+else if (
+# ifdef EXPERIMENTAL_DANE
+ dane ||
+# endif
+ verify_check_given_host(&ob->hosts_require_tls, host) == OK
+ )
{
save_errno = ERRNO_TLSREQUIRED;
- message = string_sprintf("a TLS session is required for %s [%s], but %s",
- host->name, host->address,
+ message = string_sprintf("a TLS session is required, but %s",
tls_offered? "an attempt to start TLS failed" :
"the server did not offer TLS support");
goto TLS_FAILED;
}
-#endif
+#endif /*SUPPORT_TLS*/
/* If TLS is active, we have just started it up and re-done the EHLO command,
so its response needs to be analyzed. If TLS is not active and this is a
we skip this. */
if (continue_hostname == NULL
- #ifdef SUPPORT_TLS
- || tls_active >= 0
- #endif
+#ifdef SUPPORT_TLS
+ || tls_out.active >= 0
+#endif
)
{
- int require_auth;
- uschar *fail_reason = US"server did not advertise AUTH support";
-
/* Set for IGNOREQUOTA if the response to LHLO specifies support and the
lmtp_ignore_quota option was set. */
the current host, esmtp will be false, so PIPELINING can never be used. If
the current host matches hosts_avoid_pipelining, don't do it. */
- smtp_use_pipelining = esmtp &&
- verify_check_this_host(&(ob->hosts_avoid_pipelining), NULL, host->name,
- host->address, NULL) != OK &&
- pcre_exec(regex_PIPELINING, NULL, CS buffer, Ustrlen(CS buffer), 0,
- PCRE_EOPT, NULL, 0) >= 0;
+ smtp_use_pipelining = esmtp
+ && verify_check_given_host(&ob->hosts_avoid_pipelining, host) != OK
+ && pcre_exec(regex_PIPELINING, NULL, CS buffer, Ustrlen(CS buffer), 0,
+ PCRE_EOPT, NULL, 0) >= 0;
DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
smtp_use_pipelining? "" : "not ");
+#ifndef DISABLE_PRDR
+ prdr_offered = esmtp
+ && pcre_exec(regex_PRDR, NULL, CS buffer, Ustrlen(CS buffer), 0,
+ PCRE_EOPT, NULL, 0) >= 0
+ && verify_check_given_host(&ob->hosts_try_prdr, host) == OK;
+
+ if (prdr_offered)
+ {DEBUG(D_transport) debug_printf("PRDR usable\n");}
+#endif
+
+ /* Note if the server supports DSN */
+ smtp_use_dsn = esmtp && pcre_exec(regex_DSN, NULL, CS buffer, (int)Ustrlen(CS buffer), 0,
+ PCRE_EOPT, NULL, 0) >= 0;
+ DEBUG(D_transport) debug_printf("use_dsn=%d\n", smtp_use_dsn);
+
/* Note if the response to EHLO specifies support for the AUTH extension.
If it has, check that this host is one we want to authenticate to, and do
the business. The host name and address must be available when the
authenticator's client driver is running. */
- smtp_authenticated = FALSE;
- require_auth = verify_check_this_host(&(ob->hosts_require_auth), NULL,
- host->name, host->address, NULL);
-
- if (esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
- {
- uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
- expand_nmax = -1; /* reset */
-
- /* Must not do this check until after we have saved the result of the
- regex match above. */
-
- if (require_auth == OK ||
- verify_check_this_host(&(ob->hosts_try_auth), NULL, host->name,
- host->address, NULL) == OK)
- {
- auth_instance *au;
- fail_reason = US"no common mechanisms were found";
-
- DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
-
- /* Scan the configured authenticators looking for one which is configured
- for use as a client, which is not suppressed by client_condition, and
- whose name matches an authentication mechanism supported by the server.
- If one is found, attempt to authenticate by calling its client function.
- */
-
- for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
- {
- uschar *p = names;
- if (!au->client ||
- (au->client_condition != NULL &&
- !expand_check_condition(au->client_condition, au->name,
- US"client authenticator")))
- {
- DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
- au->name,
- (au->client)? "client_condition is false" :
- "not configured as a client");
- continue;
- }
-
- /* Loop to scan supported server mechanisms */
-
- while (*p != 0)
- {
- int rc;
- int len = Ustrlen(au->public_name);
- while (isspace(*p)) p++;
-
- if (strncmpic(au->public_name, p, len) != 0 ||
- (p[len] != 0 && !isspace(p[len])))
- {
- while (*p != 0 && !isspace(*p)) p++;
- continue;
- }
-
- /* Found data for a listed mechanism. Call its client entry. Set
- a flag in the outblock so that data is overwritten after sending so
- that reflections don't show it. */
-
- fail_reason = US"authentication attempt(s) failed";
- outblock.authenticating = TRUE;
- rc = (au->info->clientcode)(au, &inblock, &outblock,
- ob->command_timeout, buffer, sizeof(buffer));
- outblock.authenticating = FALSE;
- DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
- au->name, rc);
-
- /* A temporary authentication failure must hold up delivery to
- this host. After a permanent authentication failure, we carry on
- to try other authentication methods. If all fail hard, try to
- deliver the message unauthenticated unless require_auth was set. */
-
- switch(rc)
- {
- case OK:
- smtp_authenticated = TRUE; /* stops the outer loop */
- break;
-
- /* Failure after writing a command */
-
- case FAIL_SEND:
- goto SEND_FAILED;
-
- /* Failure after reading a response */
-
- case FAIL:
- if (errno != 0 || buffer[0] != '5') goto RESPONSE_FAILED;
- log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
- au->name, host->name, host->address, buffer);
- break;
-
- /* Failure by some other means. In effect, the authenticator
- decided it wasn't prepared to handle this case. Typically this
- is the result of "fail" in an expansion string. Do we need to
- log anything here? Feb 2006: a message is now put in the buffer
- if logging is required. */
-
- case CANCELLED:
- if (*buffer != 0)
- log_write(0, LOG_MAIN, "%s authenticator cancelled "
- "authentication H=%s [%s] %s", au->name, host->name,
- host->address, buffer);
- break;
-
- /* Internal problem, message in buffer. */
-
- case ERROR:
- yield = ERROR;
- set_errno(addrlist, 0, string_copy(buffer), DEFER, FALSE);
- goto SEND_QUIT;
- }
-
- break; /* If not authenticated, try next authenticator */
- } /* Loop for scanning supported server mechanisms */
- } /* Loop for further authenticators */
- }
- }
-
- /* If we haven't authenticated, but are required to, give up. */
-
- if (require_auth == OK && !smtp_authenticated)
+ switch (yield = smtp_auth(buffer, sizeof(buffer), addrlist, host,
+ ob, esmtp, &inblock, &outblock))
{
- yield = DEFER;
- set_errno(addrlist, ERRNO_AUTHFAIL,
- string_sprintf("authentication required but %s", fail_reason), DEFER,
- FALSE);
- goto SEND_QUIT;
+ default: goto SEND_QUIT;
+ case OK: break;
+ case FAIL_SEND: goto SEND_FAILED;
+ case FAIL: goto RESPONSE_FAILED;
}
}
if (!rc)
{
set_errno(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER,
- FALSE);
+ FALSE, NULL);
yield = ERROR;
goto SEND_QUIT;
}
while (*p) p++;
}
-/* Add the authenticated sender address if present */
+#ifndef DISABLE_PRDR
+prdr_active = FALSE;
+if (prdr_offered)
+ {
+ for (addr = first_addr; addr; addr = addr->next)
+ if (addr->transport_return == PENDING_DEFER)
+ {
+ for (addr = addr->next; addr; addr = addr->next)
+ if (addr->transport_return == PENDING_DEFER)
+ { /* at least two recipients to send */
+ prdr_active = TRUE;
+ sprintf(CS p, " PRDR"); p += 5;
+ break;
+ }
+ break;
+ }
+ }
+#endif
-if ((smtp_authenticated || ob->authenticated_sender_force) &&
- local_authenticated_sender != NULL)
+/* check if all addresses have lasthop flag */
+/* do not send RET and ENVID if true */
+dsn_all_lasthop = TRUE;
+for (addr = first_addr;
+ address_count < max_rcpt && addr != NULL;
+ addr = addr->next)
+ if ((addr->dsn_flags & rf_dsnlasthop) != 1)
+ dsn_all_lasthop = FALSE;
+
+/* Add any DSN flags to the mail command */
+
+if ((smtp_use_dsn) && (dsn_all_lasthop == FALSE))
{
- string_format(p, sizeof(buffer) - (p-buffer), " AUTH=%s",
- auth_xtextencode(local_authenticated_sender,
- Ustrlen(local_authenticated_sender)));
+ if (dsn_ret == dsn_ret_hdrs)
+ {
+ Ustrcpy(p, " RET=HDRS");
+ while (*p) p++;
+ }
+ else if (dsn_ret == dsn_ret_full)
+ {
+ Ustrcpy(p, " RET=FULL");
+ while (*p) p++;
+ }
+ if (dsn_envid != NULL)
+ {
+ string_format(p, sizeof(buffer) - (p-buffer), " ENVID=%s", dsn_envid);
+ while (*p) p++;
+ }
+ }
+
+/* If an authenticated_sender override has been specified for this transport
+instance, expand it. If the expansion is forced to fail, and there was already
+an authenticated_sender for this message, the original value will be used.
+Other expansion failures are serious. An empty result is ignored, but there is
+otherwise no check - this feature is expected to be used with LMTP and other
+cases where non-standard addresses (e.g. without domains) might be required. */
+
+if (smtp_mail_auth_str(p, sizeof(buffer) - (p-buffer), addrlist, ob))
+ {
+ yield = ERROR;
+ goto SEND_QUIT;
}
/* From here until we send the DATA command, we can make use of PIPELINING
int count;
BOOL no_flush;
+ addr->dsn_aware = smtp_use_dsn ? dsn_support_yes : dsn_support_no;
+
if (addr->transport_return != PENDING_DEFER) continue;
address_count++;
no_flush = smtp_use_pipelining && (!mua_wrapper || addr->next != NULL);
+ /* Add any DSN flags to the rcpt command and add to the sent string */
+
+ p = buffer;
+ *p = 0;
+
+ if (smtp_use_dsn && (addr->dsn_flags & rf_dsnlasthop) != 1)
+ {
+ if ((addr->dsn_flags & rf_dsnflags) != 0)
+ {
+ int i;
+ BOOL first = TRUE;
+ Ustrcpy(p, " NOTIFY=");
+ while (*p) p++;
+ for (i = 0; i < 4; i++)
+ if ((addr->dsn_flags & rf_list[i]) != 0)
+ {
+ if (!first) *p++ = ',';
+ first = FALSE;
+ Ustrcpy(p, rf_names[i]);
+ while (*p) p++;
+ }
+ }
+
+ if (addr->dsn_orcpt != NULL)
+ {
+ string_format(p, sizeof(buffer) - (p-buffer), " ORCPT=%s",
+ addr->dsn_orcpt);
+ while (*p) p++;
+ }
+ }
+
/* Now send the RCPT command, and process outstanding responses when
necessary. After a timeout on RCPT, we just end the function, leaving the
yield as OK, because this error can often mean that there is a problem with
just one address, so we don't want to delay the host. */
- count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>%s\r\n",
- transport_rcpt_address(addr, tblock->rcpt_include_affixes), igquotstr);
+ count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>%s%s\r\n",
+ transport_rcpt_address(addr, tblock->rcpt_include_affixes), igquotstr, buffer);
+
if (count < 0) goto SEND_FAILED;
if (count > 0)
{
if (mua_wrapper)
{
address_item *badaddr;
- for (badaddr = first_addr; badaddr != NULL; badaddr = badaddr->next)
- {
- if (badaddr->transport_return != PENDING_OK) break;
- }
- if (badaddr != NULL)
- {
- set_errno(addrlist, 0, badaddr->message, FAIL,
- testflag(badaddr, af_pass_message));
- ok = FALSE;
- }
+ for (badaddr = first_addr; badaddr; badaddr = badaddr->next)
+ if (badaddr->transport_return != PENDING_OK)
+ {
+ /*XXX could we find a better errno than 0 here? */
+ set_errno(addrlist, 0, badaddr->message, FAIL,
+ testflag(badaddr, af_pass_message), NULL);
+ ok = FALSE;
+ break;
+ }
}
/* If ok is TRUE, we know we have got at least one good recipient, and must now
DEBUG(D_transport|D_v)
debug_printf(" SMTP>> writing message and terminating \".\"\n");
transport_count = 0;
+
#ifndef DISABLE_DKIM
ok = dkim_transport_write_message(addrlist, inblock.sock,
topt_use_crlf | topt_end_dot | topt_escape_headers |
smtp_command = US"end of data";
- /* For SMTP, we now read a single response that applies to the whole message.
- If it is OK, then all the addresses have been delivered. */
+#ifndef DISABLE_PRDR
+ /* For PRDR we optionally get a partial-responses warning
+ * followed by the individual responses, before going on with
+ * the overall response. If we don't get the warning then deal
+ * with per non-PRDR. */
+ if(prdr_active)
+ {
+ ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '3',
+ ob->final_timeout);
+ if (!ok && errno == 0)
+ switch(buffer[0])
+ {
+ case '2': prdr_active = FALSE;
+ ok = TRUE;
+ break;
+ case '4': errno = ERRNO_DATA4XX;
+ addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ break;
+ }
+ }
+ else
+#endif
+
+ /* For non-PRDR SMTP, we now read a single response that applies to the
+ whole message. If it is OK, then all the addresses have been delivered. */
if (!lmtp)
{
/* Set up confirmation if needed - applies only to SMTP */
- if ((log_extra_selector & LX_smtp_confirmation) != 0 && !lmtp)
+ if (
+#ifndef EXPERIMENTAL_EVENT
+ (log_extra_selector & LX_smtp_confirmation) != 0 &&
+#endif
+ !lmtp
+ )
{
uschar *s = string_printing(buffer);
conf = (s == buffer)? (uschar *)string_copy(s) : s;
}
- /* Process all transported addresses - for LMTP, read a status for
+ /* Process all transported addresses - for LMTP or PRDR, read a status for
each one. */
for (addr = addrlist; addr != first_addr; addr = addr->next)
address. For temporary errors, add a retry item for the address so that
it doesn't get tried again too soon. */
+#ifndef DISABLE_PRDR
+ if (lmtp || prdr_active)
+#else
if (lmtp)
+#endif
{
if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
ob->final_timeout))
{
if (errno != 0 || buffer[0] == 0) goto RESPONSE_FAILED;
- addr->message = string_sprintf("LMTP error after %s: %s",
+ addr->message = string_sprintf(
+#ifndef DISABLE_PRDR
+ "%s error after %s: %s", prdr_active ? "PRDR":"LMTP",
+#else
+ "LMTP error after %s: %s",
+#endif
big_buffer, string_printing(buffer));
setflag(addr, af_pass_message); /* Allow message to go to user */
if (buffer[0] == '5')
errno = ERRNO_DATA4XX;
addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
addr->transport_return = DEFER;
- retry_add_item(addr, addr->address_retry_key, 0);
+#ifndef DISABLE_PRDR
+ if (!prdr_active)
+#endif
+ retry_add_item(addr, addr->address_retry_key, 0);
}
continue;
}
addr->host_used = thost;
addr->special_action = flag;
addr->message = conf;
+#ifndef DISABLE_PRDR
+ if (prdr_active) addr->flags |= af_prdr_used;
+#endif
flag = '-';
- /* Update the journal. For homonymic addresses, use the base address plus
- the transport name. See lots of comments in deliver.c about the reasons
- for the complications when homonyms are involved. Just carry on after
- write error, as it may prove possible to update the spool file later. */
+#ifndef DISABLE_PRDR
+ if (!prdr_active)
+#endif
+ {
+ /* Update the journal. For homonymic addresses, use the base address plus
+ the transport name. See lots of comments in deliver.c about the reasons
+ for the complications when homonyms are involved. Just carry on after
+ write error, as it may prove possible to update the spool file later. */
- if (testflag(addr, af_homonym))
- sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
- else
- sprintf(CS buffer, "%.500s\n", addr->unique);
+ if (testflag(addr, af_homonym))
+ sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ else
+ sprintf(CS buffer, "%.500s\n", addr->unique);
- DEBUG(D_deliver) debug_printf("journalling %s", buffer);
- len = Ustrlen(CS buffer);
- if (write(journal_fd, buffer, len) != len)
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
- "%s: %s", buffer, strerror(errno));
+ DEBUG(D_deliver) debug_printf("journalling %s", buffer);
+ len = Ustrlen(CS buffer);
+ if (write(journal_fd, buffer, len) != len)
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
+ "%s: %s", buffer, strerror(errno));
+ }
}
+#ifndef DISABLE_PRDR
+ if (prdr_active)
+ {
+ /* PRDR - get the final, overall response. For any non-success
+ upgrade all the address statuses. */
+ ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ ob->final_timeout);
+ if (!ok)
+ {
+ if(errno == 0 && buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX;
+ addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
+ for (addr = addrlist; addr != first_addr; addr = addr->next)
+ if (buffer[0] == '5' || addr->transport_return == OK)
+ addr->transport_return = PENDING_OK; /* allow set_errno action */
+ goto RESPONSE_FAILED;
+ }
+
+ /* Update the journal, or setup retry. */
+ for (addr = addrlist; addr != first_addr; addr = addr->next)
+ if (addr->transport_return == OK)
+ {
+ if (testflag(addr, af_homonym))
+ sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ else
+ sprintf(CS buffer, "%.500s\n", addr->unique);
+
+ DEBUG(D_deliver) debug_printf("journalling(PRDR) %s", buffer);
+ len = Ustrlen(CS buffer);
+ if (write(journal_fd, buffer, len) != len)
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
+ "%s: %s", buffer, strerror(errno));
+ }
+ else if (addr->transport_return == DEFER)
+ retry_add_item(addr, addr->address_retry_key, -2);
+ }
+#endif
+
/* Ensure the journal file is pushed out to disk. */
if (EXIMfsync(journal_fd) < 0)
in message and save_errno, and setting_up will always be true. Treat as
a temporary error. */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
TLS_FAILED:
code = '4';
- #endif
+#endif
/* If the failure happened while setting up the call, see if the failure was
a 5xx response (this will either be on connection, or following HELO - a 5xx
if (setting_up)
{
if (code == '5')
- {
- set_errno(addrlist, save_errno, message, FAIL, pass_message);
- }
+ set_errno(addrlist, save_errno, message, FAIL, pass_message, host);
else
{
- set_errno(addrlist, save_errno, message, DEFER, pass_message);
+ set_errno(addrlist, save_errno, message, DEFER, pass_message, host);
yield = DEFER;
}
}
{
if (mua_wrapper) code = '5'; /* Force hard failure in wrapper mode */
set_errno(addrlist, save_errno, message, (code == '5')? FAIL : DEFER,
- pass_message);
+ pass_message, host);
/* If there's an errno, the message contains just the identity of
the host. */
if (save_errno > 0)
message = US string_sprintf("%s: %s", message, strerror(save_errno));
if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), message);
+ msglog_line(host, message);
*message_defer = TRUE;
}
}
{
yield = (save_errno == ERRNO_CHHEADER_FAIL ||
save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER;
- set_errno(addrlist, save_errno, message, DEFER, pass_message);
+ set_errno(addrlist, save_errno, message, DEFER, pass_message, host);
}
}
}
if (completed_address && ok && send_quit)
{
BOOL more;
- if (first_addr != NULL || continue_more ||
- (
- (tls_active < 0 ||
- verify_check_this_host(&(ob->hosts_nopass_tls), NULL, host->name,
- host->address, NULL) != OK)
+ if ( first_addr != NULL
+ || continue_more
+ || ( ( tls_out.active < 0
+ || verify_check_given_host(&ob->hosts_nopass_tls, host) != OK
+ )
&&
transport_check_waiting(tblock->name, host->name,
tblock->connection_max_messages, new_message_id, &more)
- ))
+ ) )
{
uschar *msg;
BOOL pass_message;
&pass_message);
if (!send_quit)
{
- DEBUG(D_transport) debug_printf("%s\n", msg);
+ DEBUG(D_transport) debug_printf("H=%s [%s] %s\n",
+ host->name, host->address, msg);
}
}
}
when TLS is shut down. We test for this by sending a new EHLO. If we
don't get a good response, we don't attempt to pass the socket on. */
- #ifdef SUPPORT_TLS
- if (tls_active >= 0)
+#ifdef SUPPORT_TLS
+ if (tls_out.active >= 0)
{
- tls_close(TRUE);
+ tls_close(FALSE, TRUE);
if (smtps)
ok = FALSE;
else
smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
ob->command_timeout);
}
- #endif
+#endif
/* If the socket is successfully passed, we musn't send QUIT (or
indeed anything!) from here. */
/* If RSET failed and there are addresses left, they get deferred. */
- else set_errno(first_addr, errno, msg, DEFER, FALSE);
+ else set_errno(first_addr, errno, msg, DEFER, FALSE, host);
}
}
END_OFF:
#ifdef SUPPORT_TLS
-tls_close(TRUE);
+tls_close(FALSE, TRUE);
#endif
/* Close the socket, and return the appropriate value, first setting
-continue_transport and continue_hostname NULL to prevent any other addresses
-that may include the host from trying to re-use a continuation socket. This
works because the NULL setting is passed back to the calling process, and
remote_max_parallel is forced to 1 when delivering over an existing connection,
case continue_more won't get set. */
(void)close(inblock.sock);
+
+#ifdef EXPERIMENTAL_EVENT
+(void) event_raise(tblock->event_action, US"tcp:close", NULL);
+#endif
+
continue_transport = NULL;
continue_hostname = NULL;
return yield;
address_item *first_addr = NULL;
address_item *addr;
for (addr = addrlist; addr != NULL; addr = addr->next)
- {
- if (addr->transport_return != DEFER) continue;
- if (first_addr == NULL) first_addr = addr;
- addr->transport_return = PENDING_DEFER;
- addr->basic_errno = 0;
- addr->more_errno = (host->mx >= 0)? 'M' : 'A';
- addr->message = NULL;
- #ifdef SUPPORT_TLS
- addr->cipher = NULL;
- addr->peerdn = NULL;
- #endif
- }
+ if (addr->transport_return == DEFER)
+ {
+ if (first_addr == NULL) first_addr = addr;
+ addr->transport_return = PENDING_DEFER;
+ addr->basic_errno = 0;
+ addr->more_errno = (host->mx >= 0)? 'M' : 'A';
+ addr->message = NULL;
+#ifdef SUPPORT_TLS
+ addr->cipher = NULL;
+ addr->ourcert = NULL;
+ addr->peercert = NULL;
+ addr->peerdn = NULL;
+ addr->ocsp = OCSP_NOT_REQ;
+#endif
+ }
return first_addr;
}
rc = host_find_byname(host, NULL, flags, &canonical_name, TRUE);
else
rc = host_find_bydns(host, NULL, flags, NULL, NULL, NULL,
+ ob->dnssec_request_domains, ob->dnssec_require_domains,
&canonical_name, NULL);
/* Update the host (and any additional blocks, resulting from
deliver_host = host->name;
deliver_host_address = host->address;
+ lookup_dnssec_authenticated = host->dnssec == DS_YES ? US"yes"
+ : host->dnssec == DS_NO ? US"no"
+ : US"";
/* Set up a string for adding to the retry key if the port number is not
the standard SMTP port. A host may have its own port setting that overrides
if (cutoff_retry == 0)
{
+ BOOL incl_ip;
/* Ensure the status of the address is set by checking retry data if
- necessary. There maybe host-specific retry data (applicable to all
+ necessary. There may be host-specific retry data (applicable to all
messages) and also data for retries of a specific message at this host.
If either of these retry records are actually read, the keys used are
returned to save recomputing them later. */
+ if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
+ US"retry_include_ip_address", ob->retry_include_ip_address,
+ ob->expand_retry_include_ip_address, &incl_ip) != OK)
+ continue; /* with next host */
+
host_is_expired = retry_check_address(addrlist->domain, host, pistring,
- ob->retry_include_ip_address, &retry_host_key, &retry_message_key);
+ incl_ip, &retry_host_key, &retry_message_key);
DEBUG(D_transport) debug_printf("%s [%s]%s status = %s\n", host->name,
(host->address == NULL)? US"" : host->address, pistring,
sending the message down a pre-existing connection. */
if (!continuing &&
- verify_check_this_host(&(ob->serialize_hosts), NULL, host->name,
- host->address, NULL) == OK)
+ verify_check_given_host(&ob->serialize_hosts, host) == OK)
{
serialize_key = string_sprintf("host-serialize-%s", host->name);
if (!enq_start(serialize_key))
if (dont_deliver)
{
host_item *host2;
- set_errno(addrlist, 0, NULL, OK, FALSE);
+ set_errno(addrlist, 0, NULL, OK, FALSE, NULL);
for (addr = addrlist; addr != NULL; addr = addr->next)
{
addr->host_used = host;
first_addr->basic_errno != ERRNO_TLSFAILURE)
write_logs(first_addr, host);
+#ifdef EXPERIMENTAL_EVENT
+ if (rc == DEFER)
+ deferred_event_raise(first_addr, host);
+#endif
+
/* If STARTTLS was accepted, but there was a failure in setting up the
TLS session (usually a certificate screwup), and the host is not in
hosts_require_tls, and tls_tempfail_tryclear is true, try again, with
session, so the in-clear transmission after those errors, if permitted,
happens inside smtp_deliver().] */
- #ifdef SUPPORT_TLS
- if (rc == DEFER && first_addr->basic_errno == ERRNO_TLSFAILURE &&
- ob->tls_tempfail_tryclear &&
- verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name,
- host->address, NULL) != OK)
+#ifdef SUPPORT_TLS
+ if ( rc == DEFER
+ && first_addr->basic_errno == ERRNO_TLSFAILURE
+ && ob->tls_tempfail_tryclear
+ && verify_check_given_host(&ob->hosts_require_tls, host) != OK
+ )
{
log_write(0, LOG_MAIN, "TLS session failure: delivering unencrypted "
"to %s [%s] (not in hosts_require_tls)", host->name, host->address);
expanded_hosts != NULL, &message_defer, TRUE);
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL)
write_logs(first_addr, host);
+# ifdef EXPERIMENTAL_EVENT
+ if (rc == DEFER)
+ deferred_event_raise(first_addr, host);
+# endif
}
- #endif
+#endif /*SUPPORT_TLS*/
}
/* Delivery attempt finished */
int delete_flag = (rc != DEFER)? rf_delete : 0;
if (retry_host_key == NULL)
{
- retry_host_key = ob->retry_include_ip_address?
+ BOOL incl_ip;
+ if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
+ US"retry_include_ip_address", ob->retry_include_ip_address,
+ ob->expand_retry_include_ip_address, &incl_ip) != OK)
+ incl_ip = TRUE; /* error; use most-specific retry record */
+
+ retry_host_key = incl_ip ?
string_sprintf("T:%S:%s%s", host->name, host->address, pistring) :
string_sprintf("T:%S%s", host->name, pistring);
}
int delete_flag = message_defer? 0 : rf_delete;
if (retry_message_key == NULL)
{
- retry_message_key = ob->retry_include_ip_address?
+ BOOL incl_ip;
+ if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
+ US"retry_include_ip_address", ob->retry_include_ip_address,
+ ob->expand_retry_include_ip_address, &incl_ip) != OK)
+ incl_ip = TRUE; /* error; use most-specific retry record */
+
+ retry_message_key = incl_ip ?
string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring,
message_id) :
string_sprintf("T:%S%s:%s", host->name, pistring, message_id);
/* Update the database which keeps information about which messages are waiting
for which hosts to become available. For some message-specific errors, the
update_waiting flag is turned off because we don't want follow-on deliveries in
-those cases. */
+those cases. If this transport instance is explicitly limited to one message
+per connection then follow-on deliveries are not possible and there's no need
+to create/update the per-transport wait-<transport_name> database. */
-if (update_waiting) transport_update_waiting(hostlist, tblock->name);
+if (update_waiting && tblock->connection_max_messages != 1)
+ transport_update_waiting(hostlist, tblock->name);
END_TRANSPORT:
return TRUE; /* Each address has its status */
}
+/* vi: aw ai sw=2
+*/
/* End of transport/smtp.c */
git://git.exim.org / users / jgh / exim.git / blobdiff