-$Cambridge: exim/doc/doc-misc/WishList,v 1.6 2004/11/09 09:32:58 ph10 Exp $
+$Cambridge: exim/doc/doc-misc/WishList,v 1.17 2005/01/21 14:19:40 ph10 Exp $
EXIM 4 WISH LIST
----------------
seem not (you don't often get two addresses to the same user).
------------------------------------------------------------------------------
-(4) 01-Jan-02 S Option to reject if no From: or Date: header line
-
-Exim, in common with many other MTAs, inserts a From: or Date: header line if
-one is missing. (It also inserts a blank Bcc:, but that is no longer needed by
-RFC 2822 - it was by 822.) The suggestion is an option to give an error
-instead. This could be done by making it possible to detect these insertions in
-the acl_smtp_data ACL.
-------------------------------------------------------------------------------
-
(6) 01-Jan-02 S Option to disable the use of -t
Dave C.
host, send AUTH/ATRN, and then accept incoming messages as usual.
------------------------------------------------------------------------------
-(50) 22-May-02 T Add comment (duplicate address) to Envelope-To:
+(50) 22-May-02 S? Add comment (duplicate address) to Envelope-To:
-This is just to minimize the confusion some people have.
+This is just to minimize the confusion some people have. However, it is not
+trivially easy to decide which to label as duplicates because of complications
+with redirection. I'm not convinced it will actually reduce confusion.
------------------------------------------------------------------------------
(51) 07-Jun-02 S Option to use another address in callout MAIL FROM
22-Apr-04: Implemented for domains, addresses, and local parts. Hosts are
too messy!
+
+The only sensible approach seems to be to allow IP address arguments only.
+Anything else should be diagnosed as an error. However, if a name appears in
+the list, a PTR lookup should be done. This may require a lot of refactoring
+in the code, because of the current assumption that were are (almost) always
+dealing with THE sending host.
------------------------------------------------------------------------------
(74) 22-Jul-02 M Extend -bV to do more semantic checking
------------------------------------------------------------------------------
(202) 10-Oct-03 S -bvsomething to do a callout after the verify
+
+For example: -bvc and -bvsc. The problem now (Nov 04) is that there are quite a
+few possible callout options that can be specified in an ACL, and they would
+have to be replicated here.
------------------------------------------------------------------------------
(203) 14-Oct-03 S verify=something to easily check for header presence
(215) 14-Nov-03 S A way of turning off message-submission fix-ups
Globally, and perhaps also via an ACL control so that it can be done on a
-per-message basis.
+per-message basis. Is this still needed? Since this item was added to this
+list, default fixups for non-local messages have been removed, and control =
+submission has been added.
------------------------------------------------------------------------------
(215) 26-Nov-03 M/L Conversion of IDNA domain names for logging
radical suggestion for a complete re-design, and is therefore BIG.
------------------------------------------------------------------------------
-(222) 19-Dec-03 S Iterative option for dnsdb
-
-A way of getting a dnsdb lookup to chop off components until something is
-found: e.g. ${lookup dndsb-i{ns=a.b.c.d}} would look for nameservers for
-a.b.c.d, then b.c.d, etc.
-------------------------------------------------------------------------------
-
(223) 22-Dec-03 S Support SOA lookup in dnsdb lookups
+
+This could be like zns, and climb up the tree till it hits a zone. Would the
+name of the zone be required?
------------------------------------------------------------------------------
(225) 22-Dec-03 M Add acl= to routers
(230) 30-Jan-04 M Find IP addresses of a domain's nameservers
This needs some way of processing a list of things in a similar way, which
-should perhaps be a more general facility.
+should perhaps be a more general facility. // This can now be done using the
+list facilities of dnsdb; verbose, but it can be done. //
------------------------------------------------------------------------------
(231) 30-Jan-04 ? -C has a number of problems when used for real
(235) 02-Feb-04 T Make smtp_accept_count available as a variable
This is for use in ACLs. Of course, it is a snapshot of the count at the
-start of the receiving process.
+start of the receiving process. As such, it could be confusing because if a
+connection lasts a long time, the "true" value could be very different. For
+this reason, I don't really like this idea.
------------------------------------------------------------------------------
(236) 02-Feb-04 S String in local_scan that's added to the binary version string
(240) 23-Feb-04 ? Some way to know if a ip is a mx for a given domain
Some kind of iterative operation for dnsdb might be a general way of providing
-this.
+this. // This can now be done using the list facilities of dnsdb; verbose, but
+it can be done. //
------------------------------------------------------------------------------
(242) 01-Mar-04 ? Run a filter from an expansion condition
Given that pids are reused non-cyclically these days, is this actually useful?
------------------------------------------------------------------------------
-(269) 26-May-04 U Run both a system and a user filter in test mode
-
- exim -bF systemfilter -bf userfilter -f sender@dom < message
-
-This would allow testing the way the userfilter handles the system
-variables set by the systemfilter.
-------------------------------------------------------------------------------
-
(270) 01-Jun-04 M Add headers at top and middle
Various initiatives like SPF and DomainKeys require header lines to be added
(280) 23-Jun-04 M A way of adding a header line after callout defer_ok
This would record that, e.g., a sender domain verified, but the callout
-could not be done.
+could not be done. There are ways of fudging this, using ACL variables and
+"warn" statements.
------------------------------------------------------------------------------
(285) 16-Jul-04 M Separate and independent log_selector for rejectlog
What about ** lines?
------------------------------------------------------------------------------
-(298) 25-Oct-04 S Debugging the daemon process only
-
-When there are daemon problems (e.g. it dies) it would be helpful to be able to
-turn on debugging that did not get passed on to any subprocesses.
-------------------------------------------------------------------------------
-
(299) 25-Oct-04 S Options to make Sieve "keep" pass to next router
Currently, "keep" saves in the mailbox. Probably need two options, for implicit
and explicit keep commands.
------------------------------------------------------------------------------
-(300) 25-Oct-04 S Option to lock out Sieve or Exim filter
-
-Currently, if allow_filter is set, either kind of filter is permitted.
-------------------------------------------------------------------------------
-
(301) 27-Oct-04 M Use an "ACL" to filter logging
This idea was for ACL syntax to be able to "accept" or "deny" individual log
That is, try the local part and * at each of the partial domain values.
------------------------------------------------------------------------------
---- HWM 306 ------------------------------------------------------------------
+
+(307) 24-Nov-04 S Check the syntax of Message-ID: header lines
+
+This could be added to "verify=header_syntax" or, if the incompatibility is
+felt to be too great, an additional condition, or a sub-option, could be added.
+------------------------------------------------------------------------------
+
+(308) 24-Nov-04 S Add $body_longlinecount and $header_longlinecount
+
+These variables would hold the number of physical lines in the body and header
+that were longer than 998 bytes. This would be fiddly to implement because of
+the way Exim currently reads the input. It isn't just a trivial patch.
+------------------------------------------------------------------------------
+
+(309) 01-Dec-04 S/M Queue runners should get locks before forking
+
+If a queue-runner opened the -D file and took out the lock before forking, it
+would waste fewer resources if the message was already being delivered. But how
+often would this actually matter in practice?
+------------------------------------------------------------------------------
+
+(310) 06-Dec-04 S After "personal" save what matched
+
+The idea is to save the email address that actually was found in the message
+in a variable so it can be used (e.g. as the From: address in an autoreply).
+------------------------------------------------------------------------------
+
+(311) 07-Dec-04 ? More flexible SMTP response codes
+
+The requestor wanted to be able to specify, for example, 551 in an ACL deny
+instead of 550, and also vary the defer code. The first digit, however, should
+remain fixed. In addition to main codes, enhanced status codes (RFC 2034) were
+requested. (As far as I can tell, they have never been highly popular.)
+------------------------------------------------------------------------------
+
+(312) 10-Dec-04 ? Shadow remote transports
+
+Unless a lot of work is done, this would be restricted to another remote
+transport. A similar effect could therefore be achieved with "shadow_hosts"
+which are like fallback_hosts but which operate on success.
+------------------------------------------------------------------------------
+
+(313) 21-Jan-05 ? Multiple queues
+
+Exim runs poorly if its queue gets too big. Various ways round this are all
+to some extent kludges. There has been a suggestion of using multiple
+directories instead of just "input". (Originally it was for a whole set of
+spool directories, but that introduces complications with the hint files.)
+On message arrival, somehow a selection of "input" must be made. Then queue
+runners must be startable for the different "queues". Don't forget that the
+"msglog" directory is also involved. Perhaps add a new level of indirection:
+/var/spool/exim/queue1/{input,msglog}, /var/spool/exim/queue2/....
+------------------------------------------------------------------------------
+--- HWM 313 ------------------------------------------------------------------
---------------------------- End of WishList ---------------------------------
git://git.exim.org / users / jgh / exim.git / blobdiff