PROXY: fix v2 protocol decode. Bugs 2003, 1747

[users/jgh/exim.git] / test / README

diff --git a/test/README b/test/README
index bcf03498da2093e73a3656b835795663ccfc2128..a600756be0c12f55067159264d3c138f9873ef0a 100644 (file)
--- a/test/README
+++ b/test/README
@@ -121,11 +121,12 @@ In order to run this test suite, the following requirements must be met:
     configs can be placed into it.  A suitable file location is .../exim/test/trusted_configs
     with content .../exim/test/test-config [fill out the ... to make full
     paths].  This file should be owner/group matching CONFIGURE_OWNER/GROUP,
     configs can be placed into it.  A suitable file location is .../exim/test/trusted_configs
     with content .../exim/test/test-config [fill out the ... to make full
     paths].  This file should be owner/group matching CONFIGURE_OWNER/GROUP,

-    or root/root.  The config files in .../exim/test/confs/ should be owner/group the same.
-    DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it
+    or root/root, and it has to be accessible for the login, under which
+    you run the tests.  The config files in .../exim/test/confs/ should be
+    owner/group the same.  DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it

     must contain the directory of the test-suite.  WHITELIST_D_MACROS should contain:
     must contain the directory of the test-suite.  WHITELIST_D_MACROS should contain:

-    
-     DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:LS:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:RT:S:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STD:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF:X:Y
+
+     DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF

 
 (10) Exim must *not* be built with USE_READLINE, as the test-suite's automation
      assumes the simpler I/O model.
 
 (10) Exim must *not* be built with USE_READLINE, as the test-suite's automation
      assumes the simpler I/O model.


@@ -267,11 +268,15 @@ There are some options for the ./runtest script itself:
   -FLAVOUR <flavour>
             This allows "overrides" for the test results. It's intended
             use is to deal with distro specific differences in the test
   -FLAVOUR <flavour>
             This allows "overrides" for the test results. It's intended
             use is to deal with distro specific differences in the test

-            output. The default flavour is "foo". If during the test
-            run differences between the current and the expected output
-            are found and no flavour file exists already, you may update
-            the "common" expected output or you may create a flavour
-            file. If  a flavour file already exists, any updates will go
+            output. The default flavour is "FOO" if autodetection fails.
+            (Autodection is possible for known flavours only. Known
+            flavours are computed after file name extensions in stdout/*
+            and stderr/*.)
+
+            If during the test run differences between the current and
+            the expected output are found and no flavour file exists already,
+            you may update the "common" expected output or you may create a
+            flavour file. If  a flavour file already exists, any updates will go

             into that flavour file!
 
   -KEEP     Normally, after a successful run, the test output files are
             into that flavour file!
 
   -KEEP     Normally, after a successful run, the test output files are


@@ -550,6 +555,7 @@ here:
   PORT_D         is replaced by a port number for normal daemon use
   PORT_N         is replaced by a port number that should never respond
   PORT_S         is replaced by a port number for normal bin/server use
   PORT_D         is replaced by a port number for normal daemon use
   PORT_N         is replaced by a port number that should never respond
   PORT_S         is replaced by a port number for normal bin/server use

+  PORT_DYNAMIC   is replaced by a port number allocated dynamically

   TESTNUM        is replaced by the current test number
   V4NET          is replaced by an IPv4 network number for testing
   V6NET          is replaced by an IPv6 network number for testing
   TESTNUM        is replaced by the current test number
   V4NET          is replaced by an IPv4 network number for testing
   V6NET          is replaced by an IPv6 network number for testing


@@ -560,6 +566,10 @@ testing purposes, and for testing Exim with -bh. The only requirement is that
 they are networks that can never be used for an IP address of a real host. I've
 chosen two multicast networks for the moment.
 
 they are networks that can never be used for an IP address of a real host. I've
 chosen two multicast networks for the moment.
 

+PORT_DYNAMIC is allocated by hunting for a free port (starting at port
+1024) a listener can bind to. This is done by runtest, for simulating
+inetd operations.
+

 If the host has no IPv6 address, "<no IPv6 address found>" is substituted but
 that does not matter because no IPv6 tests will be run. A similar substitution
 is made if there is no IPv4 address, and again, tests that actually require a
 If the host has no IPv6 address, "<no IPv6 address found>" is substituted but
 that does not matter because no IPv6 tests will be run. A similar substitution
 is made if there is no IPv4 address, and again, tests that actually require a


@@ -928,7 +938,9 @@ input, details of which are given below. A number of options are implemented:
   -d       causes the server to output debugging information
 
   -t <sec> sets a timeout (default 5) for when the server is
   -d       causes the server to output debugging information
 
   -t <sec> sets a timeout (default 5) for when the server is

-           awaiting an incoming connection
+           awaiting an incoming connection. If negative, the
+          absolute value is used and a timeout results in a
+          nonfailure exit code

 
   -noipv4  causes the server not to set up an IPv4 socket
 
 
   -noipv4  causes the server not to set up an IPv4 socket
 


@@ -1011,14 +1023,20 @@ Lines in client scripts are of two kinds:
 (2) If a line starts with three plus signs followed by a space, the rest of the
     line specifies a number of seconds to sleep for before proceeding.
 
 (2) If a line starts with three plus signs followed by a space, the rest of the
     line specifies a number of seconds to sleep for before proceeding.
 

-(3) Otherwise, the line is an input line line that is sent to the server. Any
+(3) If a line begins with three '>' characters and a space, the rest of the
+    line is input to be sent to the server.  Backslash escaping is done as
+    described below, but no trailing "\r\n" is sent.
+
+(4) Otherwise, the line is an input line line that is sent to the server. Any

     occurrences of \r and \n in the line are turned into carriage return and
     linefeed, respectively. This is used for testing PIPELINING.
     occurrences of \r and \n in the line are turned into carriage return and
     linefeed, respectively. This is used for testing PIPELINING.

+    Any sequences of \x followed by two hex digits are converted to the equvalent
+    byte value.  Any other character following a \ is sent verbatim.

 
 Here is a simple example:
 
   client 127.0.0.1 PORT_D
 
 Here is a simple example:
 
   client 127.0.0.1 PORT_D

-  ??? 250
+  ??? 220

   EHLO xxx
   ??? 250-
   ??? 250
   EHLO xxx
   ??? 250-
   ??? 250