###############################################################################
#use strict;
-use 5.010;
-use feature 'state'; # included in 5.010
+use v5.10.1;
use warnings;
+use if $^V >= v5.19.11, experimental => 'smartmatch';
use Errno;
use FileHandle;
use Time::Local;
use Cwd;
use File::Basename;
+use Pod::Usage;
+use Getopt::Long;
use FindBin qw'$RealBin';
use lib "$RealBin/lib";
use Exim::Runtest;
+use Exim::Utils qw(uniq numerically);
-use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
+use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Smart::Comments' => '####';
+use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Data::Dumper';
+
+use constant TEST_TOP => 8999;
+use constant TEST_SPECIAL_TOP => 9999;
# Start by initializing some global variables
my $cr = "\r";
my $debug = 0;
my $flavour = do {
- my $f = Exim::Runtest::flavour();
+ my $f = Exim::Runtest::flavour() // '';
(grep { $f eq $_ } Exim::Runtest::flavours()) ? $f : 'FOO';
};
my $force_continue = 0;
my $force_update = 0;
my $log_failed_filename = 'failed-summary.log';
+my $log_summary_filename = 'run-summary.log';
my $more = 'less -XF';
my $optargs = '';
my $save_output = 0;
my $server_opts = '';
+my $slow = 0;
my $valgrind = 0;
my $have_ipv4 = 1;
my $have_ipv6 = 1;
my $have_largefiles = 0;
-my $test_start = 1;
-my $test_end = $test_top = 8999;
-my $test_special_top = 9999;
my @test_list = ();
-my @test_dirs = ();
# Networks to use for DNS tests. We need to choose some networks that will
my($is_log) = $file =~ /log/;
my($is_stdout) = $file =~ /stdout/;
my($is_stderr) = $file =~ /stderr/;
+my($is_mail) = $file =~ /mail/;
# Date pattern
s?prvs=([^/]+)/[\da-f]{10}@?prvs=$1/xxxxxxxxxx@?g; # Old form
s?prvs=[\da-f]{10}=([^@]+)@?prvs=xxxxxxxxxx=$1@?g; # New form
- # Error lines on stdout from SSL contain process id values and file names.
- # They also contain a source file name and line number, which may vary from
- # release to release.
- s/^\d+:error:/pppp:error:/;
- s/:(?:\/[^\s:]+\/)?([^\/\s]+\.c):\d+:/:$1:dddd:/;
-
# There are differences in error messages between OpenSSL versions
s/SSL_CTX_set_cipher_list/SSL_connect/;
{
my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
$expired = '' if !defined $expired;
- my($increment) = date_seconds($date3) - date_seconds($date2);
+
+ # Round the time-difference up to nearest even value
+ my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
# We used to use globally unique replacement values, but timing
# differences make this impossible. Just show the increment on the
# more_errno values in exim_dumpdb output which are times
s/T:(\S+)\s-22\s(\S+)\s/T:$1 -22 xxxx /;
+ # port numbers in dumpdb output
+ s/T:([a-z.]+(:[0-9.]+)?):$parm_port_n /T:$1:PORT_N /;
+
+ # port numbers in stderr
+ s/^set_process_info: .*\]:\K$parm_port_d /PORT_D /;
+ s/^set_process_info: .*\]:\K$parm_port_s /PORT_S /;
+
# ======== Dates and times ========
# time used was fixed when I first started running automatic Exim tests.
# Date/time in header lines and SMTP responses
- s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d\d\d\d\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+ s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
/Tue, 2 Mar 1999 09:44:33 +0000/gx;
+ # and in a French locale
+ s/\S{4},\s\d\d?\s[^,]+\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+ /dim., 10 f\xE9vr 2019 20:05:49 +0000/gx;
# Date/time in logs and in one instance of a filter test
- s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?/1999-03-02 09:44:33/gx;
+ s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?\s/1999-03-02 09:44:33 /gx;
+ s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}(\s[+-]\d\d\d\d)?\s/2017-07-30 18:51:05.712 /gx;
s/^Logwrite\s"\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Logwrite "1999-03-02 09:44:33/gx;
+ # Date/time in syslog test
+ s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s/2017-07-30 18:51:05 /gx;
+ s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s/2017-07-30 18:51:05.712 /gx;
+ s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s[+-]\d\d\d\d\s/2017-07-30 18:51:05 +9999 /gx;
+ s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s[+-]\d\d\d\d\s/2017-07-30 18:51:05.712 +9999 /gx;
+
+ s/((D|[RQD]T)=)\d+s/$1qqs/g;
+ s/((D|[RQD]T)=)\d\.\d{3}s/$1q.qqqs/g;
# Date/time in message separators
s/(?:[A-Z][a-z]{2}\s){2}\d\d\s\d\d:\d\d:\d\d\s\d\d\d\d
my($next) = $3 - $2;
$_ = " first failed=dddd last try=dddd next try=+$next $4\n";
}
- s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\d)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
+ s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
# Time to retry may vary
# Date/time in exim -bV output
s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
- # Time on queue tolerance
- s/(QT|D)=1s/$1=0s/;
-
# Eximstats heading
s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
s/(could not connect to .*: Connection) reset by peer$/$1 refused/;
# ======== TLS certificate algorithms ========
+ #
+ # In Received: headers, convert RFC 8314 style ciphersuite to
+ # the older (comment) style, keeping only the Auth element
+ # (discarding kex, cipher, mac). For TLS 1.3 there is no kex
+ # element (and no _WITH); insert a spurious "RSA".
+
+ s/^\s+by .+ with .+ \K tls TLS_.*?([^_]+)_WITH.+$/(TLS1.x:ke-$1-AES256-SHAnnn:xxx)/;
+ s/^\s+by .+ with .+ \K tls TLS_.+$/(TLS1.x:ke-RSA-AES256-SHAnnn:xxx)/;
+
# Test machines might have various different TLS library versions supporting
# different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
# treat the standard algorithms the same.
+ #
+ # TLSversion : KeyExchange? - Authentication/Signature - C_iph_er - MAC : ???
+ #
# So far, have seen:
# TLSv1:AES128-GCM-SHA256:128
# TLSv1:AES256-SHA:256
# TLSv1.1:AES256-SHA:256
# TLSv1.2:AES256-GCM-SHA384:256
# TLSv1.2:DHE-RSA-AES256-SHA:256
+ # TLSv1.3:TLS_AES_256_GCM_SHA384:256
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
# We also need to handle the ciphersuite without the TLS part present, for
# client-ssl's output. We also see some older forced ciphersuites, but
# negotiating TLS 1.2 instead of 1.0.
# Mail headers (...), log-lines X=..., client-ssl output ...
# (and \b doesn't match between ' ' and '(' )
+ #
+ # Retain the authentication algorith field as we want to test that.
- s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
- s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
- s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
- s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
- s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
+ s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1(\.[123])?:/$1TLS1.x:/xg;
+ s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA)(?!:)/ke-$3-AES256-SHAnnn/g;
+ s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA):(128|256)/ke-$3-AES256-SHAnnn:xxx/g;
+
+ # OpenSSL TLSv1.3 - unsure what to do about the authentication-variant testcases now,
+ # as it seems the protocol no longer supports a user choice. Replace the "TLS" field with "RSA".
+ # Also insert a key-exchange field for back-compat, even though 1.3 doesn't do that.
+ #
+ # TLSversion : "TLS" - C_iph_er - MAC : ???
+ #
+ s/TLS_AES(_256)?_GCM_SHA384(?!:)/ke-RSA-AES256-SHAnnn/g;
+ s/:TLS_AES(_256)?_GCM_SHA384:256/:ke-RSA-AES256-SHAnnn:xxx/g;
# LibreSSL
+ # TLSv1:AES256-GCM-SHA384:256
# TLSv1:ECDHE-RSA-CHACHA20-POLY1305:256
- s/\bECDHE-RSA-CHACHA20-POLY1305\b/AES256-SHA/g;
+ #
+ # ECDHE-RSA-CHACHA20-POLY1305
+ # AES256-GCM-SHA384
+
+ s/(?<!-)(AES256-GCM-SHA384)/RSA-$1/;
+ s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305)(?!:)/ke-$3-AES256-SHAnnn/g;
+ s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305):256/ke-$3-AES256-SHAnnn:xxx/g;
# GnuTLS have seen:
+ # TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256
+ # TLS1.3:ECDHE_SECP256R1__RSA_PSS_RSAE_SHA256__AES_256_GCM__AEAD:256
+ # TLS1.3:ECDHE_X25519__RSA_PSS_RSAE_SHA256__AES_256_GCM:256
+ # TLS1.3:ECDHE_PSK_SECP256R1__AES_256_GCM__AEAD:256
+ #
# TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
# TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
# TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
+ # TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_256_GCM:256
+ # TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_128_CBC__SHA256:128
+ # TLS1.2:ECDHE_SECP256R1__ECDSA_SHA512__AES_256_GCM:256
+ # TLS1.2:ECDHE_SECP256R1__AES_256_GCM:256 (3.6.7 resumption)
+ # TLS1.2:ECDHE_RSA_SECP256R1__AES_256_GCM:256 (! 3.5.18 !)
+ # TLS1.2:RSA__CAMELLIA_256_GCM:256 (leave the cipher name)
+ # TLS1.2-PKIX:RSA__AES_128_GCM__AEAD:128 (the -PKIX seems to be a 3.1.20 thing)
+ # TLS1.2-PKIX:ECDHE_RSA_SECP521R1__AES_256_GCM__AEAD:256
#
# X=TLS1.2:DHE_RSA_AES_256_CBC_SHA256:256
# X=TLS1.2:RSA_AES_256_CBC_SHA1:256
# X=TLS1.1:RSA_AES_256_CBC_SHA1:256
+ # X=TLS1.0:RSA_AES_256_CBC_SHA1:256
# X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
+ # X=TLS1.0-PKIX:RSA__AES_256_CBC__SHA1:256
# and as stand-alone cipher:
# ECDHE-RSA-AES256-SHA
# DHE-RSA-AES256-SHA256
# DHE-RSA-AES256-SHA
# picking latter as canonical simply because regex easier that way.
- s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
- s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
- s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+ s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA-AES256-SHA1:256/g;
+ s/TLS1.[0123](-PKIX)?: # TLS version
+ ((EC)?DHE(_((?<psk>PSK)_)?((?<auth>RSA|ECDSA)_)?
+ (SECP(256|521)R1|X25519))?__?)? # key-exchange
+ ((?<auth>RSA|ECDSA)((_PSS_RSAE)?_SHA(512|256))?__?)? # authentication
+ AES_(256|128)_(CBC|GCM) # cipher
+ (__?AEAD)? # pseudo-MAC
+ (__?SHA(1|256|384))? # PRF
+ :(256|128) # cipher strength
+ /"TLS1.x:ke-"
+ . (defined($+{psk}) ? $+{psk} : "")
+ . (defined($+{auth}) ? $+{auth} : "")
+ . "-AES256-SHAnnn:xxx"/gex;
+ s/TLS1.2:RSA__CAMELLIA_256_GCM(_SHA384)?:256/TLS1.2:RSA_CAMELLIA_256_GCM-SHAnnn:256/g;
+ s/\b(ECDHE-(RSA|ECDSA)-AES256-SHA|DHE-RSA-AES256-SHA256)\b/ke-$2-AES256-SHAnnn/g;
# GnuTLS library error message changes
- s/No certificate was found/The peer did not send any certificate/g;
+ s/(No certificate was found|Certificate is required)/The peer did not send any certificate/g;
#(dodgy test?) s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+ s/\(gnutls_handshake\): \KNo supported cipher suites have been found.$/Could not negotiate a supported cipher suite./;
# (this new one is a generic channel-read error, but the testsuite
# only hits it in one place)
s/\bgid=\d+/gid=gggg/;
s/\begid=\d+/egid=gggg/;
- s/\bpid=\d+/pid=pppp/;
+ s/\b(pid=|PID: )\d+/$1pppp/;
s/\buid=\d+/uid=uuuu/;
s/\beuid=\d+/euid=uuuu/;
s/set_process_info:\s+\d+/set_process_info: pppp/;
s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
# Optional pid in log lines
- s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\s[+-]\d\d\d\d|)(\s\[\d+\])/
- "$1$2 [" . new_value($3, "%s", \$next_pid) . "]"/gxe;
+ s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\.\d{3}|)(\s[+-]\d{4}|)(\s\[\d+\])/
+ "$1$2$3 [" . new_value($4, "%s", \$next_pid) . "]"/gxe;
+
+ # Optional pid in syslog test lines
+ s/^(SYSLOG:\s\'([-0-9]{10}\s[:.0-9]{8,12}\s([-+]\d{4}\s)?|))(\[\d+\] )/
+ "$1\[" . new_value($4, "%s", \$next_pid) . "]"/gxe;
# Detect a daemon stderr line with a pid and save the pid for subsequent
# removal from following lines.
s/waiting for children of \d+/waiting for children of pppp/;
s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
- # The spool header file name varies with PID
- s%^(Writing spool header file: .*/hdr).[0-9]{1,5}%$1.pppp%;
-
# ======== Port numbers ========
# Incoming port numbers may vary, but not in daemon startup line.
# numbers, or handle specific bad conditions in different ways, leading to
# different wording in the error messages, so we cannot compare them.
- s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+#XXX This loses any trailing "deliving unencypted to" which is unfortunate
+# but I can't work out how to deal with that.
+ s/(TLS session: \(SSL_\w+\): error:)(.*)(?!: delivering)/$1 <<detail omitted>>/;
+ s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
# ======== Maildir things ========
}
}
+ # remote IPv6 addrs vary
+ s/^(Connection request from) \[.*:.*:.*\]$/$1 \[ipv6\]/;
+
# openssl version variances
- next if /^SSL info: unknown state/;
- next if /^SSL info: SSLv2\/v3 write client hello A/;
- next if /^SSL info: SSLv3 read server key exchange A/;
+ # Error lines on stdout from SSL contain process id values and file names.
+ # They also contain a source file name and line number, which may vary from
+ # release to release.
+
+ next if /^SSL info:/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
s/SSL3_READ_BYTES/ssl3_read_bytes/i;
+ s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
+ s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+ s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/;
# gnutls version variances
next if /^Error in the pull function./;
+
+ # optional IDN2 variant conversions. Accept either IDN1 or IDN2
+ s/conversion strasse.de/conversion xn--strae-oqa.de/;
+ s/conversion: german.xn--strae-oqa.de/conversion: german.straße.de/;
+
+ # subsecond timstamp info in reported header-files
+ s/^(-received_time_usec \.)\d{6}$/$1uuuuuu/;
+
+ # Postgres server takes varible time to shut down; lives in various places
+ s/^waiting for server to shut down\.+ done$/waiting for server to shut down.... done/;
+ s/^\/.*postgres /POSTGRES /;
+
+ # DMARC is not always supported by the build
+ next if /^dmarc_tld_file =/;
+
+ # ARC is not always supported by the build
+ next if /^arc_sign =/;
+
+ # TLS resumption is not always supported by the build
+ next if /^tls_resumption_hosts =/;
+ next if /^-tls_resumption/;
}
# ======== stderr ========
s/^Exim version .*/Exim version x.yz ..../;
- # Debugging lines for Exim terminations
+ # Debugging lines for Exim terminations and process-generation
s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
+ s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
# IP address lookups use gethostbyname() when IPv6 is not supported,
# and gethostbyname2() or getipnodebyname() when it is.
s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
+ # we don't care what TZ enviroment the testhost was running
+ next if /^Reset TZ to/;
+
# drop gnutls version strings
next if /GnuTLS compile-time version: \d+[\.\d]+$/;
next if /GnuTLS runtime version: \d+[\.\d]+$/;
}
next if /^tls_validate_require_cipher child \d+ ended: status=0x0/;
- # We invoke Exim with -D, so we hit this new messag as of Exim 4.73:
+ # We invoke Exim with -D, so we hit this new message as of Exim 4.73:
next if /^macros_trusted overridden to true by whitelisting/;
# We have to omit the localhost ::1 address so that all is well in
next if /name=localhost address=::1/;
# drop pdkim debugging header
- next if /^PDKIM <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+$/;
+ next if /^PDKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
# Various other IPv6 lines must be omitted too
# Some DBM libraries seem to make DBM files on opening with O_RDWR without
# O_CREAT; other's don't. In the latter case there is some debugging output
# which is not present in the former. Skip the relevant lines (there are
- # two of them).
+ # three of them).
- if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
+ if (/returned from EXIM_DBOPEN: \(nil\)/)
{
- $_ = <IN>;
- next;
+ $_ .= <IN>;
+ s?\Q$parm_cwd\E?TESTSUITE?g;
+ if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
+ { $_ = <IN>; next; }
}
# Some tests turn on +expand debugging to check on expansions.
# remote port numbers vary
s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
+ # Platform-dependent error strings
+ s/Operation timed out/Connection timed out/;
+
# Skip hosts_require_dane checks when the options
# are unset, because dane ain't always there.
-
next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+ # DISABLE_OCSP
+ next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
+
# SUPPORT_PROXY
next if /host in hosts_proxy\?/;
+ # PIPE_CONNECT
+ next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
+
# Experimental_International
next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
+ # Experimental_REQUIRETLS
+ next if / in tls_advertise_requiretls?\? no \(end of list\)/;
+
+ # TCP Fast Open
+ next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
+
# Environment cleaning
next if /\w+ in keep_environment\? (yes|no)/;
if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
{
$_ .= <IN>;
- s/\s+\}\}(?=\(Exim )/\}\} /;
+ s/[\s╎]+\}\}(?=\(Exim )/\}\} /;
}
- if (/^ condition: def:tls_cipher$/)
+ if (/^ ├──condition: def:tls_cipher$/)
{
<IN>; <IN>; <IN>; <IN>; <IN>; <IN>;
<IN>; <IN>; <IN>; <IN>; <IN>; next;
# Not all platforms build with DKIM enabled
next if /^PDKIM >> Body data for hash, canonicalized/;
+ # Not all platforms have sendfile support
+ next if /^cannot use sendfile for body: no support$/;
+
+ # Parts of DKIM-specific debug output depend on the time/date
+ next if /^date:\w+,\{SP\}/;
+ next if /^PDKIM \[[^[]+\] (Header hash|b) computed:/;
+
# Not all platforms support TCP Fast Open, and the compile omits the check
- if (s/\S+ in hosts_try_fastopen\? no \(option unset\)\n$//)
+ if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|yes \(matched "\*"\))\n$//)
{
$_ .= <IN>;
s/ \.\.\. >>> / ... /;
+ s/Address family not supported by protocol family/Network Error/;
s/Network is unreachable/Network Error/;
}
-
next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
+ s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
+
+ if (/^([0-9: ]* # possible timestamp
+ Connecting\ to\ [^ ]+\ [^ ]+(\ from\ [^ ]+)?)\ \.\.\.
+ \ .*TFO\ mode\
+ (sendto,\ no\ data:\ EINPROGRESS # Linux
+ |connection\ attempt\ to\ [^,]+,\ 0\ data) # MacOS & no-support
+ $/x)
+ {
+ $_ = $1 . " ... " . <IN>;
+ s/^(.* \.\.\.) [0-9: ]*connected$/$1 connected/;
+
+ if (/^Connecting to .* \.\.\. connected$/)
+ {
+ $_ .= <IN>;
+ if (/^(Connecting to .* \.\.\. )connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)
+ {
+ $_ = $1 . "failed: Connection refused\n" . <IN>;
+ s/^(Connecting .*)\n\s+SMTP\(close\)>>$/$1/;
+ }
+ elsif (/^(Connecting to .* \.\.\. connected\n)read response data: size=/)
+ { $_ = $1; }
+
+ # Date/time in SMTP banner
+ s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+ /Tue, 2 Mar 1999 09:44:33 +0000/gx;
+ }
+ }
+
+ # Specific pointer values reported for DB operations change from run to run
+ s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+
+ # Platform-dependent output during MySQL startup
+ next if /PerconaFT file system space/;
+ next if /^Waiting for MySQL server to answer/;
+ next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
+
+ # Not all builds include DMARC
+ next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
+
+ # TLS resumption is not always supported by the build
+ next if /in tls_resumption_hosts\?/;
+
+ # Platform differences in errno strings
+ s/ SMTP\(Operation timed out\)<</ SMTP(Connection timed out)<</;
# When Exim is checking the size of directories for maildir, it uses
# the check_dir_size() function to scan directories. Of course, the order
/^Support for:/ ||
/^Routers:/ ||
/^Transports:/ ||
+ /^Malware:/ ||
/^log selectors =/ ||
/^cwd=/ ||
/^Fixed never_users:/ ||
{
# Berkeley DB version differences
next if / Berkeley DB error: /;
+
+ # CHUNKING: exact sizes depend on hostnames in headers
+ s/(=>.* K C="250- \d)\d+ (byte chunk, total \d)\d+/$1nn $2nn/;
+
+ # openssl version variances
+ s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
+ s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
+ s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
+ s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
+
+ # gnutls version variances
+ if (/TLS error on connection \(recv\): .* (Decode error|peer did not send any certificate)/)
+ {
+ my $prev = $_;
+ $_ = <IN>;
+ if (/error on first read/)
+ {
+ s/TLS session: \Kerror on first read:/(gnutls_handshake): A TLS fatal alert has been received.:/;
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
+ else
+ { $_ = $prev; }
+ }
+ # translate gnutls error into the openssl one
+ s/ARC: AMS signing: privkey PEM-block import: \KThe requested data were not available.$/error:0906D06C:PEM routines:PEM_read_bio:no start line/;
+
+ # DKIM timestamps
+ if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )
+ {
+ my ($prefix, $t_diff) = ($1, $3 - $2);
+ s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
+ }
+
+ # port numbers
+ s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
+ s/(?:\[[^\]]*\]:|port )\K$parm_port_d2/PORT_D2/;
+ s/(?:\[[^\]]*\]:|port )\K$parm_port_d3/PORT_D3/;
+ s/(?:\[[^\]]*\]:|port )\K$parm_port_d4/PORT_D4/;
+ s/(?:\[[^\]]*\]:|port )\K$parm_port_s/PORT_S/;
+ s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
+ s/I=\[[^\]]*\]:\K\d+/ppppp/;
+
+ }
+
+ # ======== mail ========
+
+ elsif ($is_mail)
+ {
+ # DKIM timestamps, and signatures depending thereon
+ if ( /^(\s+)t=([0-9]*); x=([0-9]*); b=[A-Za-z0-9+\/]+$/ )
+ {
+ my ($indent, $t_diff) = ($1, $3 - $2);
+ s/.*/${indent}t=T; x=T+${t_diff}; b=bbbb;/;
+ <IN>;
+ <IN>;
+ }
}
# ======== All files other than stderr ========
. "failed\n";
}
+# Computer-readable summary results logfile
+
+sub log_test {
+ my ($logfile, $testno, $resultchar) = @_;
+
+ open(my $fh, '>>', $logfile) or return;
+ print $fh "$testno $resultchar\n";
+}
+
##################################################
# [4] TRUE if this is a log file whose deliveries must be sorted
# [5] optionally, a custom munge command
#
-# Returns: 0 comparison succeeded or differences to be ignored
-# 1 comparison failed; files may have been updated (=> re-compare)
+# Returns: 0 comparison succeeded
+# 1 comparison failed; differences to be ignored
+# 2 comparison failed; files may have been updated (=> re-compare)
#
# Does not return if the user replies "Q" to a prompt.
{
$_ = interact('Continue, Show, or Quit? [Q] ', undef, $force_continue);
tests_exit(1) if /^q?$/;
- log_failure($log_failed_filename, $testno, $rf) if (/^c$/ && $force_continue);
- return 0 if /^c$/i;
- last if (/^s$/);
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, $rf);
+ log_test($log_summary_filename, $testno, 'F') if ($force_continue);
+ }
+ return 1 if /^c$/i && $rf !~ /paniclog/ && $rsf !~ /paniclog/;
+ last if (/^[sc]$/);
}
foreach $f ($rf, $rsf)
{
$_ = interact('Continue, Update & retry, Quit? [Q] ', $force_update, $force_continue);
tests_exit(1) if /^q?$/;
- log_failure($log_failed_filename, $testno, $rsf) if (/^c$/ && $force_continue);
- return 0 if /^c$/i;
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, $rf);
+ log_test($log_summary_filename, $testno, 'F')
+ }
+ return 1 if /^c$/i;
last if (/^u$/i);
}
}
. ($sf_current ne $sf_flavour ? "/Save for flavour '$flavour'" : '')
. ' & retry, Quit? [Q] ', $force_update, $force_continue);
tests_exit(1) if /^q?$/;
- log_failure($log_failed_filename, $testno, $sf_current) if (/^c$/i && $force_continue);
- return 0 if /^c$/i;
- return 1 if /^r$/i;
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, $sf_current);
+ log_test($log_summary_filename, $testno, 'F')
+ }
+ return 1 if /^c$/i;
+ return 2 if /^r$/i;
last if (/^[us]$/i);
}
}
if (-s $mf)
{
- my $sf = /^u/i ? $sf_current : $sf_flavour;
- tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0;
+ my $sf = /^u/i ? $sf_current : $sf_flavour;
+ tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0;
}
else
{
- # if we deal with a flavour file, we can't delete it, because next time the generic
- # file would be used again
- if ($sf_current eq $sf_flavour) {
- open(FOO, ">$sf_current");
- close(FOO);
- }
- else {
- tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
- }
+ # if we deal with a flavour file, we can't delete it, because next time the generic
+ # file would be used again
+ if ($sf_current eq $sf_flavour) {
+ open(FOO, ">$sf_current");
+ close(FOO);
+ }
+ else {
+ tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
+ }
}
-return 1;
+return 2;
}
'gnutls_handshake' =>
{ 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
+ 'gnutls_bad_clientcert' =>
+ { 'mainlog' => 's/\(certificate verification failed\): certificate invalid/\(gnutls_handshake\): The peer did not send any certificate./',
+ 'stdout' => 's/Succeeded in starting TLS/A TLS fatal alert has been received.\nFailed to start TLS'
+ },
+
'optional_events' =>
{ 'stdout' => '/event_action =/' },
{ 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
'tls_anycipher' =>
- { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+ { 'mainlog' => 's! X=TLS\S+ ! X=TLS_proto_and_cipher !;
+ s! DN="C=! DN="/C=!;
+ s! DN="[^,"]*\K,!/!;
+ s! DN="[^,"]*\K,!/!;
+ s! DN="[^,"]*\K,!/!;
+ ',
+ 'rejectlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /',
+ 'mail' => 's/^\s+by .+ with .+ \K tls TLS_.+$/(TLS_proto_and_cipher)/;
+ s/ \(TLS[^)]*\)/ (TLS_proto_and_cipher)/;
+ ',
+ },
'debug_pid' =>
{ 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
'optional_config' =>
{ 'stdout' => '/^(
- dkim_(canon|domain|private_key|selector|sign_headers|strict)
+ dkim_(canon|domain|private_key|selector|sign_headers|strict|hash|identity|timestamps)
|gnutls_require_(kx|mac|protocols)
+ |hosts_pipe_connect
|hosts_(requ(est|ire)|try)_(dane|ocsp)
- |hosts_(avoid|nopass|require|verify_avoid)_tls
+ |dane_require_tls_ciphers
+ |hosts_(avoid|nopass|noproxy|require|verify_avoid)_tls
+ |pipelining_connect_advertise_hosts
|socks_proxy
|tls_[^ ]*
- )($|[ ]=)/x' },
+ |utf8_downconvert
+ )($|[ ]=)/x'
+ },
'sys_bindir' =>
- { 'mainlog' => 's%/(usr/)?bin/%SYSBINDIR/%' },
+ { 'mainlog' => 's%/(usr/(local/)?)?bin/%SYSBINDIR/%' },
'sync_check_data' =>
{ 'mainlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/',
'timeout_errno' => # actual errno differs Solaris vs. Linux
{ 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },
+
+ 'peer_terminated_conn' => # actual error differs FreedBSD vs. Linux
+ { 'stderr' => 's/^( SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
+
+ 'perl_variants' => # result of hash-in-scalar-context changed from bucket-fill to keycount
+ { 'stdout' => 's%^> X/X$%> X%' },
};
+sub max {
+ my ($a, $b) = @_;
+ return $a if ($a > $b);
+ return $b;
+}
+
##################################################
# Subroutine to check the output of a test #
##################################################
#
# Arguments: Optionally, name of a single custom munge to run.
# Returns: 0 if the output compared equal
-# 1 if re-run needed (files may have been updated)
+# 1 if comparison failed; differences to be ignored
+# 2 if re-run needed (files may have been updated)
sub check_output{
my($mungename) = $_[0];
my($yield) = 0;
my($munge) = $munges->{$mungename} if defined $mungename;
-$yield = 1 if check_file("spool/log/paniclog",
+$yield = max($yield, check_file("spool/log/paniclog",
"spool/log/serverpaniclog",
"test-paniclog-munged",
"paniclog/$testno", 0,
- $munge->{paniclog});
+ $munge->{paniclog}));
-$yield = 1 if check_file("spool/log/rejectlog",
+$yield = max($yield, check_file("spool/log/rejectlog",
"spool/log/serverrejectlog",
"test-rejectlog-munged",
"rejectlog/$testno", 0,
- $munge->{rejectlog});
+ $munge->{rejectlog}));
-$yield = 1 if check_file("spool/log/mainlog",
+$yield = max($yield, check_file("spool/log/mainlog",
"spool/log/servermainlog",
"test-mainlog-munged",
"log/$testno", $sortlog,
- $munge->{mainlog});
+ $munge->{mainlog}));
if (!$stdout_skip)
{
- $yield = 1 if check_file("test-stdout",
+ $yield = max($yield, check_file("test-stdout",
"test-stdout-server",
"test-stdout-munged",
"stdout/$testno", 0,
- $munge->{stdout});
+ $munge->{stdout}));
}
if (!$stderr_skip)
{
- $yield = 1 if check_file("test-stderr",
+ $yield = max($yield, check_file("test-stderr",
"test-stderr-server",
"test-stderr-munged",
"stderr/$testno", 0,
- $munge->{stderr});
+ $munge->{stderr}));
}
# Compare any delivered messages, unless this test is skipped.
}
print ">> COMPARE $mail mail/$testno.$saved_mail\n" if $debug;
- $yield = 1 if check_file($mail, undef, "test-mail-munged",
+ $yield = max($yield, check_file($mail, undef, "test-mail-munged",
"mail/$testno.$saved_mail", 0,
- $munge->{mail});
+ $munge->{mail}));
delete $expected_mails{"mail/$testno.$saved_mail"};
}
{
$_ = interact('Continue, Update & retry, or Quit? [Q] ', $force_update, $force_continue);
tests_exit(1) if /^q?$/;
- log_failure($log_failed_filename, $testno, "missing email") if (/^c$/ && $force_continue);
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, "missing email");
+ log_test($log_summary_filename, $testno, 'F')
+ }
last if /^c$/;
# For update, we not only have to unlink the file, but we must also
($munged_msglog = $msglog) =~
s/((?:[^\W_]{6}-){2}[^\W_]{2})
/new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
- $yield = 1 if check_file("spool/msglog/$msglog", undef,
+ $yield = max($yield, check_file("spool/msglog/$msglog", undef,
"test-msglog-munged", "msglog/$testno.$munged_msglog", 0,
- $munge->{msglog});
+ $munge->{msglog}));
delete $expected_msglogs{"$testno.$munged_msglog"};
}
}
{
$_ = interact('Continue, Update, or Quit? [Q] ', $force_update, $force_continue);
tests_exit(1) if /^q?$/;
- log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/ && $force_continue);
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, "missing msglog");
+ log_test($log_summary_filename, $testno, 'F')
+ }
last if /^c$/;
if (/^u$/)
{
# The <SCRIPT> file is open for us to read an optional return code line,
# followed by the command line and any following data lines for stdin. The
# command line can be continued by the use of \. Data lines are not continued
-# in this way. In all lines, the following substutions are made:
+# in this way. In all lines, the following substitutions are made:
#
# DIR => the current directory
# CALLER => the caller of this script
# reference to the subtest number, holding previous value
# reference to the expected return code value
# reference to where to put the command name (for messages)
-# auxilliary information returned from a previous run
+# auxiliary information returned from a previous run
#
-# Returns: 0 the commmand was executed inline, no subprocess was run
+# Returns: 0 the command was executed inline, no subprocess was run
# 1 a non-exim command was run and waited for
# 2 an exim command was run and waited for
# 3 a command was run and not waited for (daemon, server, exim_lock)
# 4 EOF was encountered after an initial return code line
-# Optionally alse a second parameter, a hash-ref, with auxilliary information:
+# Optionally also a second parameter, a hash-ref, with auxiliary information:
# exim_pid: pid of a run process
# munge: name of a post-script results munger
# The "munge" command selects one of a hardwired set of test-result modifications
-# to be made before result compares are run agains the golden set. This lets
+# to be made before result compares are run against the golden set. This lets
# us account for test-system dependent things which only affect a few, but known,
# test-cases.
# Currently only the last munge takes effect.
if ($args =~ /\$msg/)
{
- my($listcmd) = "$parm_cwd/eximdir/exim -bp " .
- "-DEXIM_PATH=$parm_cwd/eximdir/exim " .
- "-C $parm_cwd/test-config |";
- print ">> Getting queue list from:\n>> $listcmd\n" if ($debug);
- open (QLIST, $listcmd) || tests_exit(-1, "Couldn't run \"exim -bp\": $!\n");
- my(@msglist) = ();
- while (<QLIST>) { push (@msglist, $1) if /^\s*\d+[smhdw]\s+\S+\s+(\S+)/; }
- close(QLIST);
+ my @listcmd = ("$parm_cwd/eximdir/exim", '-bp',
+ "-DEXIM_PATH=$parm_cwd/eximdir/exim",
+ -C => "$parm_cwd/test-config");
+ print ">> Getting queue list from:\n>> @listcmd\n" if $debug;
+ # We need the message ids sorted in ascending order.
+ # Message id is: <timestamp>-<pid>-<fractional-time>. On some systems (*BSD) the
+ # PIDs are randomized, so sorting just the whole PID doesn't work.
+ # We do the Schartz' transformation here (sort on
+ # <timestamp><fractional-time>). Thanks to Kirill Miazine
+ my @msglist =
+ map { $_->[1] } # extract the values
+ sort { $a->[0] cmp $b->[0] } # sort by key
+ map { [join('.' => (split /-/, $_)[0,2]) => $_] } # key (timestamp.fractional-time) => value(message_id)
+ map { /^\s*\d+[smhdw]\s+\S+\s+(\S+)/ } `@listcmd` or tests_exit(-1, "No output from `exim -bp` (@listcmd)\n");
# Done backwards just in case there are more than 9
if ($cmd =~ /\s-DSERVER=server\s/ && $cmd !~ /\s-DNOTDAEMON\s/)
{
- $pidfile = "$parm_cwd/spool/exim-daemon.pid";
if ($debug) { printf ">> daemon: $cmd\n"; }
run_system("sudo mkdir spool/log 2>/dev/null");
run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
# Interlock with daemon startup
- while (! stat("$pidfile") ) { select(undef, undef, undef, 0.3); }
+ for (my $count = 0; ! stat("$pidfile") && $count < 30; $count++ )
+ { select(undef, undef, undef, 0.3); }
return 3; # Don't wait
}
elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
$_ = <SCRIPT>; $lineno++;
chomp;
+ do_substitute($testno);
$line = $_;
if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
-##################################################
-# Check for sudo access to root #
-##################################################
-
-print "You need to have sudo access to root to run these tests. Checking ...\n";
-if (system('sudo true >/dev/null') != 0)
- {
- die "** Test for sudo failed: testing abandoned.\n";
- }
-else
- {
- print "Test for sudo OK\n";
- }
-
-
-
##################################################
# See if an Exim binary has been given #
##################################################
# as the path to the binary. If the first argument does not start with a
# '/' but exists in the file system, it's assumed to be the Exim binary.
-($parm_exim, @ARGV) = Exim::Runtest::exim_binary(@ARGV);
-print "Exim binary is $parm_exim\n" if $parm_exim ne '';
-
-
##################################################
# Sort out options and which tests are to be run #
# options are passed on to Exim calls within the tests. Typically, this is used
# to turn on Exim debugging while setting up a test.
-while (@ARGV > 0 && $ARGV[0] =~ /^-/)
- {
- my($arg) = shift @ARGV;
- if ($optargs eq '')
- {
- if ($arg eq "-DEBUG") { $debug = 1; $cr = "\n"; next; }
- if ($arg eq "-DIFF") { $cf = "diff -u"; next; }
- if ($arg eq "-CONTINUE"){$force_continue = 1;
- $more = "cat";
- next; }
- if ($arg eq "-UPDATE") { $force_update = 1; next; }
- if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
- if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
- if ($arg eq "-KEEP") { $save_output = 1; next; }
- if ($arg eq "-VALGRIND") { $valgrind = 1; next; }
- if ($arg =~ /^-FLAVOU?R$/) { $flavour = shift; next; }
- }
- $optargs .= " $arg";
- }
+Getopt::Long::Configure qw(no_getopt_compat);
+GetOptions(
+ 'debug' => sub { $debug = 1; $cr = "\n" },
+ 'diff' => sub { $cf = 'diff -u' },
+ 'continue' => sub { $force_continue = 1; $more = 'cat' },
+ 'update' => \$force_update,
+ 'ipv4!' => \$have_ipv4,
+ 'ipv6!' => \$have_ipv6,
+ 'keep' => \$save_output,
+ 'slow' => \$slow,
+ 'valgrind' => \$valgrind,
+ 'range=s{2}' => \my @range_wanted,
+ 'test=i@' => \my @tests_wanted,
+ 'flavor|flavour=s' => \$flavour,
+ 'help' => sub { pod2usage(-exit => 0) },
+ 'man' => sub {
+ pod2usage(
+ -exit => 0,
+ -verbose => 2,
+ -noperldoc => system('perldoc -V 2>/dev/null 1>&2')
+ );
+ },
+) or pod2usage;
+
+($parm_exim, @ARGV) = Exim::Runtest::exim_binary(@ARGV);
+print "Exim binary is `$parm_exim'\n" if defined $parm_exim;
+
+
+my @wanted = sort numerically uniq
+ @tests_wanted ? @tests_wanted : (),
+ @range_wanted ? $range_wanted[0] .. $range_wanted[1] : (),
+ @ARGV ? @ARGV == 1 ? $ARGV[0] :
+ $ARGV[1] eq '+' ? $ARGV[0]..($ARGV[0] >= 9000 ? TEST_SPECIAL_TOP : TEST_TOP) :
+ 0+$ARGV[0]..0+$ARGV[1] # add 0 to cope with test numbers starting with zero
+ : ();
+@wanted = 1..TEST_TOP if not @wanted;
-# Any subsequent arguments are a range of test numbers.
+##################################################
+# Check for sudo access to root #
+##################################################
-if (@ARGV > 0)
+print "You need to have sudo access to root to run these tests. Checking ...\n";
+if (system('sudo true >/dev/null') != 0)
{
- $test_end = $test_start = $ARGV[0];
- $test_end = $ARGV[1] if (@ARGV > 1);
- $test_end = ($test_start >= 9000)? $test_special_top : $test_top
- if $test_end eq "+";
- die "** Test numbers out of order\n" if ($test_end < $test_start);
+ die "** Test for sudo failed: testing abandoned.\n";
}
+else
+ {
+ print "Test for sudo OK\n";
+ }
+
+
##################################################
# If $parm_exim is still empty, ask the caller
-if ($parm_exim eq '')
+if (not $parm_exim)
{
print "** Did not find an Exim binary to test\n";
for ($i = 0; $i < 5; $i++)
close(OUT);
print("Probing with config file: $parm_cwd/test-config\n");
-open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
- "-bP exim_user exim_group 2>&1|") ||
- die "** Cannot run $parm_exim: $!\n";
-while(<EXIMINFO>)
+
+my $eximinfo = "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd -bP exim_user exim_group";
+chomp(my @eximinfo = `$eximinfo 2>&1`);
+die "$0: Can't run $eximinfo\n" if $? == -1;
+
+warn 'Got ' . $?>>8 . " from $eximinfo\n" if $?;
+foreach (@eximinfo)
{
if (my ($version) = /^Exim version (\S+)/) {
my $git = `git describe --dirty=-XX --match 'exim-4*'`;
if (defined $git and $? == 0) {
chomp $git;
- $version =~ s/^\d+\K\./_/;
$git =~ s/^exim-//i;
$git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
print <<___
if /^Configure owner:\s*(\d+):(\d+)/;
print if /wrong owner/;
}
-close(EXIMINFO);
-if (defined $parm_eximuser)
- {
- if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
- else { $parm_exim_uid = getpwnam($parm_eximuser); }
- }
-else
- {
- print "Unable to extract exim_user from binary.\n";
- print "Check if Exim refused to run; if so, consider:\n";
- print " TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS\n";
- print "If debug permission denied, are you in the exim group?\n";
- die "Failing to get information from binary.\n";
- }
+if (not defined $parm_eximuser) {
+ die <<XXX, map { "|$_\n" } @eximinfo;
+Unable to extract exim_user from binary.
+Check if Exim refused to run; if so, consider:
+ TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS
+If debug permission denied, are you in the exim group?
+Failing to get information from binary.
+Output from $eximinfo:
+XXX
+
+}
+
+if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
+else { $parm_exim_uid = getpwnam($parm_eximuser); }
if (defined $parm_eximgroup)
{
open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
my $test_config = getcwd() . '/test-config';
die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
- if not grep { /^$test_config$/ } <TCL>;
+ if not grep { /^\Q$test_config\E$/ } <TCL>;
}
else
{
if 0020 & (stat "$parm_cwd/test-config")[2]
and $parm_configure_group != $);
+die "aux-fixed file is group-writeable; best to strip them all, recursively\n"
+ if 0020 & (stat "aux-fixed/0037.f-1")[2];
+
open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
die "** Cannot run $parm_exim: $!\n";
my(@temp);
if (/^(Exim|Library) version/) { print; }
+ if (/Runtime: /) {print; }
elsif (/^Size of off_t: (\d+)/)
{
}
}
}
+
+ elsif (/^Malware: (.*)/)
+ {
+ print;
+ @temp = split /(\s+)/, $1;
+ push(@temp, ' ');
+ %parm_malware = @temp;
+ }
+
}
close(EXIMINFO);
print "-" x 78, "\n";
# This test for an active SpamAssassin is courtesy of John Jetmore.
# The tests are hard coded to localhost:783, so no point in making
# this test flexible like the clamav test until the test scripts are
- # changed. spamd doesn't have the nice PING/PONG protoccol that
+ # changed. spamd doesn't have the nice PING/PONG protocol that
# clamd does, but it does respond to errors in an informative manner,
# so use that.
die "** ABANDONING.\n";
}
+if ($parm_caller_home eq $parm_cwd)
+ {
+ print "will confuse working dir with homedir; change homedir\n";
+ die "** ABANDONING.\n";
+ }
+
print "You need to be in the Exim group to run these tests. Checking ...";
if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
$parm_ipv4 = $1;
}
- if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:\/\d+)/i)
+ if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
{
next if $1 eq '::1' or $1 =~ /^fe80/i;
$parm_ipv6 = $1;
print "IPv4 address is $parm_ipv4\n";
print "IPv6 address is $parm_ipv6\n";
+$parm_ipv6 =~ /^[^%\/]*/;
# For munging test output, we need the reversed IP addresses.
print "\n*** Host name has upper case characters: this may cause problems ***\n\n";
}
+if ($parm_hostname =~ /\.example\.com$/)
+ {
+ die "\n*** Host name ends in .example.com; this conflicts with the testsuite use of that domain.\n"
+ . " Please change the host's name (or comment out this check, and fail several testcases)\n";
+ }
+
##################################################
"sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
"sudo chmod 06755 eximdir/exim_exim");
-
##################################################
# Make copies of utilities we might need #
##################################################
tests_exit(-1, "Failed to make a copy of eximstats: $!");
}
+# Collect some version information
+print '-' x 78, "\n";
+print "Perl version for runtest: $]\n";
+foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats)) {
+ # fold (or unfold?) multiline output into a one-liner
+ print join(', ', map { chomp; $_ } `$_ --version`), "\n";
+}
+print '-' x 78, "\n";
+
##################################################
# Check that the Exim user can access stuff #
print " OK\n";
}
+tests_exit(-1, "Failed to unlink $log_summary_filename: $!")
+ if not unlink($log_summary_filename) and -e $log_summary_filename;
##################################################
# Create a list of available tests #
# because the current binary does not support the right facilities, and also
# those that are outside the numerical range selected.
-print "\nTest range is $test_start to $test_end (flavour $flavour)\n";
+printf "\nWill run %d tests between %d and %d for flavour %s\n",
+ scalar(@wanted), $wanted[0], $wanted[-1], $flavour;
+
print "Omitting \${dlfunc expansion tests (loadable module not present)\n"
if $dlfunc_deleted;
print "Omitting dbm tests (unable to copy exim_dbmbuild)\n"
if $dbm_build_deleted;
-opendir(DIR, "scripts") || tests_exit(-1, "Failed to opendir(\"scripts\"): $!");
-@test_dirs = sort readdir(DIR);
-closedir(DIR);
-# Remove . and .. and CVS from the list.
-
-for ($i = 0; $i < @test_dirs; $i++)
- {
- my($d) = $test_dirs[$i];
- if ($d eq "." || $d eq ".." || $d eq "CVS")
- {
- splice @test_dirs, $i, 1;
- $i--;
- }
- }
+my @test_dirs = grep { not /^CVS$/ } map { basename $_ } glob 'scripts/*'
+ or die tests_exit(-1, "Failed to find test scripts in 'scripts/*`: $!");
# Scan for relevant tests
-
-for ($i = 0; $i < @test_dirs; $i++)
+# HS12: Needs to be reworked.
+DIR: for (my $i = 0; $i < @test_dirs; $i++)
{
my($testdir) = $test_dirs[$i];
my($wantthis) = 1;
# Skip this directory if the first test is equal or greater than the first
# test in the next directory.
- next if ($i < @test_dirs - 1) &&
- ($test_start >= substr($test_dirs[$i+1], 0, 4));
+ next DIR if ($i < @test_dirs - 1) &&
+ ($wanted[0] >= substr($test_dirs[$i+1], 0, 4));
# No need to carry on if the end test is less than the first test in this
# subdirectory.
- last if $test_end < substr($testdir, 0, 4);
+ last DIR if $wanted[-1] < substr($testdir, 0, 4);
# Check requirements, if any.
- if (open(REQUIRES, "scripts/$testdir/REQUIRES"))
+ if (open(my $requires, "scripts/$testdir/REQUIRES"))
{
- while (<REQUIRES>)
+ while (<$requires>)
{
next if /^\s*$/;
s/\s+$//;
{
if (!defined $parm_transports{$1}) { $wantthis = 0; last; }
}
+ elsif (/^malware (.*)$/)
+ {
+ if (!defined $parm_malware{$1}) { $wantthis = 0; last; }
+ }
+ elsif (/^feature (.*)$/)
+ {
+ # move to a subroutine?
+ my $eximinfo = "$parm_exim -C $parm_cwd/test-config -DDIR=$parm_cwd -bP macro $1";
+
+ open (IN, "$parm_cwd/confs/0000") ||
+ tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+ open (OUT, ">test-config") ||
+ tests_exit(-1, "Couldn't open test-config: $!\n");
+ while (<IN>)
+ {
+ do_substitute($testno);
+ print OUT;
+ }
+ close(IN);
+ close(OUT);
+
+ system($eximinfo . " >/dev/null 2>&1");
+ if ($? != 0) {
+ unlink("$parm_cwd/test-config");
+ $wantthis = 0;
+ $_ = "feature $1";
+ last;
+ }
+ unlink("$parm_cwd/test-config");
+ }
else
{
tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");
}
}
- close(REQUIRES);
}
else
{
{
chomp;
print "Omitting tests in $testdir (missing $_)\n";
- next;
}
# We want the tests from this subdirectory, provided they are in the
# range that was selected.
- opendir(SUBDIR, "scripts/$testdir") ||
- tests_exit(-1, "Failed to opendir(\"scripts/$testdir\"): $!");
- @testlist = sort readdir(SUBDIR);
- close(SUBDIR);
+ @testlist = grep { $_ ~~ @wanted } grep { /^\d+(?:\.\d+)?$/ } map { basename $_ } glob "scripts/$testdir/*";
+ tests_exit(-1, "Failed to read test scripts from `scripts/$testdir/*': $!")
+ if not @testlist;
foreach $test (@testlist)
{
- next if $test !~ /^\d{4}(?:\.\d+)?$/;
- next if $test < $test_start || $test > $test_end;
- push @test_list, "$testdir/$test";
+ if (!$wantthis)
+ {
+ log_test($log_summary_filename, $test, '.');
+ }
+ else
+ {
+ push @test_list, "$testdir/$test";
+ }
}
}
-print ">>Test List: @test_list\n", if $debug;
+print ">>Test List:\n", join "\n", @test_list, '' if $debug;
##################################################
if (not $force_continue) {
# runtest needs to interact if we're not in continue
# mode. It does so by communicate to /dev/tty
- open(T, "/dev/tty") or tests_exit(-1, "Failed to open /dev/tty: $!");
+ open(T, '<', '/dev/tty') or tests_exit(-1, "Failed to open /dev/tty: $!");
+ print "\nPress RETURN to run the tests: ";
+ <T>;
}
-print "\nPress RETURN to run the tests: ";
-$_ = $force_continue ? "c" : <T>;
-print "\n";
-
-$lasttestdir = '';
-
foreach $test (@test_list)
{
- local($lineno) = 0;
- local($commandno) = 0;
- local($subtestno) = 0;
+ state $lasttestdir = '';
+
+ local $lineno = 0;
+ local $commandno = 0;
+ local $subtestno = 0;
+ local $sortlog = 0;
+
(local $testno = $test) =~ s|.*/||;
- local($sortlog) = 0;
- my($gnutls) = 0;
- my($docheck) = 1;
- my($thistestdir) = substr($test, 0, -5);
+ # Leaving traces in the process table and in the environment
+ # gives us a chance to identify hanging processes (exim daemons)
+ local $0 = "[runtest $testno]";
+ local $ENV{EXIM_TEST_NUMBER} = $testno;
+
+ my $gnutls = 0;
+ my $docheck = 1;
+ my $thistestdir = substr($test, 0, -5);
$dynamic_socket->close() if $dynamic_socket;
$gnutls = 0;
if (-s "scripts/$thistestdir/REQUIRES")
{
- my($indent) = '';
+ my $indent = '';
print "\n>>> The following tests require: ";
- open(IN, "scripts/$thistestdir/REQUIRES") ||
- tests_exit(-1, "Failed to open scripts/$thistestdir/REQUIRES: $1");
- while (<IN>)
+ open(my $requires, '<', "scripts/$thistestdir/REQUIRES") ||
+ tests_exit(-1, "Failed to open scripts/$thistestdir/REQUIRES: $!");
+ while (<$requires>)
{
$gnutls = 1 if /^support GnuTLS/;
print $indent, $_;
$indent = ">>> ";
}
- close(IN);
}
+ $lasttestdir = $thistestdir;
}
- $lasttestdir = $thistestdir;
# Remove any debris in the spool directory and the test-mail directory
# and also the files for collecting stdout and stderr. Then put back
my($rc, $run_extra) = run_command($testno, \$subtestno, \$expectrc, \$commandname, $TEST_STATE);
my($cmdrc) = $?;
- $0 = "[runtest $testno]";
-
if ($debug) {
print ">> rc=$rc cmdrc=$cmdrc\n";
if (defined $run_extra) {
print "\nshow stdErr, show stdOut, Retry, Continue (without file comparison), or Quit? [Q] ";
$_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
- log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, "exit code unexpected");
+ log_test($log_summary_filename, $testno, 'F')
+ }
if ($force_continue)
{
- print "\nstderr tail:\n";
+ print "\nstdout tail:\n";
+ print "==================>\n";
+ system("tail -20 test-stdout");
print "===================\n";
+ print "stderr tail:\n";
+ print "==================>\n";
system("tail -20 test-stderr");
print "===================\n";
print "... continue forced\n";
if ($? != 0)
{
if (($? & 0xff) == 0)
- { printf("Server return code %d", $?/256); }
+ { printf("Server return code %d for test %d starting line %d", $?/256,
+ $testno, $subtest_startline); }
elsif (($? & 0xff00) == 0)
{ printf("Server killed by signal %d", $? & 255); }
else
print "\nShow server stdout, Retry, Continue, or Quit? [Q] ";
$_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
- log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ if (/^c$/ && $force_continue) {
+ log_failure($log_failed_filename, $testno, "exit code unexpected");
+ log_test($log_summary_filename, $testno, 'F')
+ }
print "... continue forced\n" if $force_continue;
last if /^[rc]$/i;
close SCRIPT;
# The script has finished. Check the all the output that was generated. The
- # function returns 0 if all is well, 1 if we should rerun the test (the files
- # have been updated). It does not return if the user responds Q to a prompt.
+ # function returns 0 for a perfect pass, 1 if imperfect but ok, 2 if we should
+ # rerun the test (the files # have been updated).
+ # It does not return if the user responds Q to a prompt.
if ($retry)
{
if ($docheck)
{
- if (check_output($TEST_STATE->{munge}) != 0)
+ sleep 1 if $slow;
+ my $rc = check_output($TEST_STATE->{munge});
+ log_test($log_summary_filename, $testno, 'P') if ($rc == 0);
+ if ($rc < 2)
{
- print (("#" x 79) . "\n");
- redo;
+ print (" Script completed\n");
}
else
{
- print (" Script completed\n");
+ print (("#" x 79) . "\n");
+ redo;
}
}
}
# Exit from the test script #
##################################################
-tests_exit(-1, "No runnable tests selected") if @test_list == 0;
+tests_exit(-1, "No runnable tests selected") if not @test_list;
tests_exit(0);
+__END__
+
+=head1 NAME
+
+ runtest - run the exim testsuite
+
+=head1 SYNOPSIS
+
+ runtest [exim-path] [options] [test0 [test1]]
+
+=head1 DESCRIPTION
+
+B<runtest> runs the Exim testsuite.
+
+=head1 OPTIONS
+
+For legacy reasons the options are not case sensitive.
+
+=over
+
+=item B<--continue>
+
+Do not stop for user interaction or on errors. (default: off)
+
+=item B<--debug>
+
+This option enables the output of debug information when running the
+various test commands. (default: off)
+
+=item B<--diff>
+
+Use C<diff -u> for comparing the expected output with the produced
+output. (default: use a built-in routine)
+
+=item B<--flavor>|B<--flavour> I<flavour>
+
+Override the expected results for results for a specific (OS) flavour.
+(default: unused)
+
+=item B<--[no]ipv4>
+
+Skip IPv4 related setup and tests (default: use ipv4)
+
+=item B<--[no]ipv6>
+
+Skip IPv6 related setup and tests (default: use ipv6)
+
+=item B<--keep>
+
+Keep the various output files produced during a test run. (default: don't keep)
+
+=item B<--range> I<n0> I<n1>
+
+Run tests between (including) I<n0> and I<n1>. A "+" may be used to specify the "last
+test available".
+
+=item B<--slow>
+
+Insert some delays to compensate for a slow host system. (default: off)
+
+=item B<--test> I<n>
+
+Run the specified test. This option may used multiple times.
+
+=item B<--update>
+
+Automatically update the recorded (expected) data on mismatch. (default: off)
+
+=item B<--valgrind>
+
+Start Exim wrapped by I<valgrind>. (default: don't use valgrind)
+
+=back
+
+=cut
+
+
# End of runtest script
git://git.exim.org / users / jgh / exim.git / blobdiff