-/* $Cambridge: exim/src/src/smtp_in.c,v 1.38 2006/04/19 10:58:21 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2006 */
+/* Copyright (c) University of Cambridge 1995 - 2014 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
int allow_severity = LOG_INFO;
int deny_severity = LOG_NOTICE;
+uschar *tcp_wrappers_name;
#endif
/* Size of buffer for reading SMTP commands. We used to use 512, as defined
by RFC 821. However, RFC 1869 specifies that this must be increased for SMTP
commands that accept arguments, and this in particular applies to AUTH, where
-the data can be quite long. */
+the data can be quite long. More recently this value was 2048 in Exim;
+however, RFC 4954 (circa 2007) recommends 12288 bytes to handle AUTH. Clients
+such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
+The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
+we need room to handle large base64-encoded AUTHs for GSSAPI.
+*/
-#define smtp_cmd_buffer_size 2048
+#define smtp_cmd_buffer_size 16384
/* Size of buffer for reading SMTP incoming packets */
/* Structure for SMTP command list */
typedef struct {
- char *name;
+ const char *name;
int len;
short int cmd;
short int has_arg;
QUIT_CMD, HELP_CMD,
+#ifdef EXPERIMENTAL_PROXY
+ PROXY_FAIL_IGNORE_CMD,
+#endif
+
/* These are specials that don't correspond to actual commands */
EOF_CMD, OTHER_CMD, BADARG_CMD, BADCHAR_CMD, BADSYN_CMD,
TOO_MANY_NONMAIL_CMD };
+/* This is a convenience macro for adding the identity of an SMTP command
+to the circular buffer that holds a list of the last n received. */
+
+#define HAD(n) \
+ smtp_connection_had[smtp_ch_index++] = n; \
+ if (smtp_ch_index >= SMTP_HBUFF_SIZE) smtp_ch_index = 0
+
/*************************************************
* Local static variables *
#ifdef SUPPORT_TLS
static BOOL tls_advertised;
#endif
+static BOOL dsn_advertised;
static BOOL esmtp;
static BOOL helo_required = FALSE;
static BOOL helo_verify = FALSE;
static BOOL helo_accept_junk;
static BOOL count_nonmail;
static BOOL pipelining_advertised;
+static BOOL rcpt_smtp_response_same;
+static BOOL rcpt_in_progress;
static int nonmail_command_count;
+static BOOL smtp_exit_function_called = 0;
static int synprot_error_count;
static int unknown_command_count;
static int sync_cmd_limit;
static int smtp_write_error = 0;
+static uschar *rcpt_smtp_response;
+static uschar *smtp_data_buffer;
+static uschar *smtp_cmd_data;
+
/* We need to know the position of RSET, HELO, EHLO, AUTH, and STARTTLS. Their
final fields of all except AUTH are forced TRUE at the start of a new message
setup, to allow one of each between messages that is not counted as a nonmail
#define CMD_LIST_AUTH 3
#define CMD_LIST_STARTTLS 4
+/* This list of names is used for performing the smtp_no_mail logging action.
+It must be kept in step with the SCH_xxx enumerations. */
+
+static uschar *smtp_names[] =
+ {
+ US"NONE", US"AUTH", US"DATA", US"EHLO", US"ETRN", US"EXPN", US"HELO",
+ US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET", US"STARTTLS",
+ US"VRFY" };
+
static uschar *protocols[] = {
US"local-smtp", /* HELO */
US"local-smtps", /* The rare case EHLO->STARTTLS->HELO */
#define pauthed 2 /* added to pextend */
#define pnlocal 6 /* offset to remove "local" */
+/* Sanity check and validate optional args to MAIL FROM: envelope */
+enum {
+ ENV_MAIL_OPT_SIZE, ENV_MAIL_OPT_BODY, ENV_MAIL_OPT_AUTH,
+#ifndef DISABLE_PRDR
+ ENV_MAIL_OPT_PRDR,
+#endif
+ ENV_MAIL_OPT_RET, ENV_MAIL_OPT_ENVID,
+ ENV_MAIL_OPT_NULL
+ };
+typedef struct {
+ uschar * name; /* option requested during MAIL cmd */
+ int value; /* enum type */
+ BOOL need_value; /* TRUE requires value (name=value pair format)
+ FALSE is a singleton */
+ } env_mail_type_t;
+static env_mail_type_t env_mail_type_list[] = {
+ { US"SIZE", ENV_MAIL_OPT_SIZE, TRUE },
+ { US"BODY", ENV_MAIL_OPT_BODY, TRUE },
+ { US"AUTH", ENV_MAIL_OPT_AUTH, TRUE },
+#ifndef DISABLE_PRDR
+ { US"PRDR", ENV_MAIL_OPT_PRDR, FALSE },
+#endif
+ { US"RET", ENV_MAIL_OPT_RET, TRUE },
+ { US"ENVID", ENV_MAIL_OPT_ENVID, TRUE },
+ { US"NULL", ENV_MAIL_OPT_NULL, FALSE }
+ };
+
/* When reading SMTP from a remote host, we have to use our own versions of the
C input-reading functions, in order to be able to flush the SMTP output only
when about to read more data from the socket. This is the only way to get
else smtp_had_eof = 1;
return EOF;
}
+#ifndef DISABLE_DKIM
+ dkim_exim_verify_feed(smtp_inbuffer, rc);
+#endif
smtp_inend = smtp_inbuffer + rc;
smtp_inptr = smtp_inbuffer;
}
+/*************************************************
+* Test for characters in the SMTP buffer *
+*************************************************/
+
+/* Used at the end of a message
+
+Arguments: none
+Returns: TRUE/FALSE
+*/
+
+BOOL
+smtp_buffered(void)
+{
+return smtp_inptr < smtp_inend;
+}
+
+
/*************************************************
* Write formatted string to SMTP channel *
*/
void
-smtp_printf(char *format, ...)
+smtp_printf(const char *format, ...)
{
va_list ap;
+va_start(ap, format);
+smtp_vprintf(format, ap);
+va_end(ap);
+}
+
+/* This is split off so that verify.c:respond_printf() can, in effect, call
+smtp_printf(), bearing in mind that in C a vararg function can't directly
+call another vararg function, only a function which accepts a va_list. */
+
+void
+smtp_vprintf(const char *format, va_list ap)
+{
+BOOL yield;
+
+yield = string_vformat(big_buffer, big_buffer_size, format, ap);
+
DEBUG(D_receive)
{
- uschar *cr, *end;
- va_start(ap, format);
- (void) string_vformat(big_buffer, big_buffer_size, format, ap);
- va_end(ap);
- end = big_buffer + Ustrlen(big_buffer);
- while ((cr = Ustrchr(big_buffer, '\r')) != NULL) /* lose CRs */
- memmove(cr, cr + 1, (end--) - cr);
- debug_printf("SMTP>> %s", big_buffer);
+ void *reset_point = store_get(0);
+ uschar *msg_copy, *cr, *end;
+ msg_copy = string_copy(big_buffer);
+ end = msg_copy + Ustrlen(msg_copy);
+ while ((cr = Ustrchr(msg_copy, '\r')) != NULL) /* lose CRs */
+ memmove(cr, cr + 1, (end--) - cr);
+ debug_printf("SMTP>> %s", msg_copy);
+ store_reset(reset_point);
}
-va_start(ap, format);
+if (!yield)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_printf()");
+ smtp_closedown(US"Unexpected error");
+ exim_exit(EXIT_FAILURE);
+ }
-/* If in a TLS session we have to format the string, and then write it using a
-TLS function. */
+/* If this is the first output for a (non-batch) RCPT command, see if all RCPTs
+have had the same. Note: this code is also present in smtp_respond(). It would
+be tidier to have it only in one place, but when it was added, it was easier to
+do it that way, so as not to have to mess with the code for the RCPT command,
+which sometimes uses smtp_printf() and sometimes smtp_respond(). */
+
+if (rcpt_in_progress)
+ {
+ if (rcpt_smtp_response == NULL)
+ rcpt_smtp_response = string_copy(big_buffer);
+ else if (rcpt_smtp_response_same &&
+ Ustrcmp(rcpt_smtp_response, big_buffer) != 0)
+ rcpt_smtp_response_same = FALSE;
+ rcpt_in_progress = FALSE;
+ }
+
+/* Now write the string */
#ifdef SUPPORT_TLS
-if (tls_active >= 0)
+if (tls_in.active >= 0)
{
- if (!string_vformat(big_buffer, big_buffer_size, format, ap))
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_printf");
- smtp_closedown(US"Unexpected error");
- exim_exit(EXIT_FAILURE);
- }
- if (tls_write(big_buffer, Ustrlen(big_buffer)) < 0) smtp_write_error = -1;
+ if (tls_write(TRUE, big_buffer, Ustrlen(big_buffer)) < 0)
+ smtp_write_error = -1;
}
else
#endif
-/* Otherwise, just use the standard library function. */
-
-if (vfprintf(smtp_out, format, ap) < 0) smtp_write_error = -1;
-va_end(ap);
+if (fprintf(smtp_out, "%s", big_buffer) < 0) smtp_write_error = -1;
}
int
smtp_fflush(void)
{
-if (tls_active < 0 && fflush(smtp_out) != 0) smtp_write_error = -1;
+if (tls_in.active < 0 && fflush(smtp_out) != 0) smtp_write_error = -1;
return smtp_write_error;
}
sig = sig; /* Keep picky compilers happy */
log_write(L_lost_incoming_connection,
LOG_MAIN, "SMTP command timeout on%s connection from %s",
- (tls_active >= 0)? " TLS" : "",
+ (tls_in.active >= 0)? " TLS" : "",
host_and_ident(FALSE));
if (smtp_batched_input)
moan_smtp_batch(NULL, "421 SMTP command timeout"); /* Does not return */
-smtp_printf("421 %s: SMTP command timeout - closing connection\r\n",
- smtp_active_hostname);
-mac_smtp_fflush();
+smtp_notquit_exit(US"command-timeout", US"421",
+ US"%s: SMTP command timeout - closing connection", smtp_active_hostname);
exim_exit(EXIT_FAILURE);
}
log_write(0, LOG_MAIN, "%s closed after SIGTERM", smtp_get_connection_info());
if (smtp_batched_input)
moan_smtp_batch(NULL, "421 SIGTERM received"); /* Does not return */
-smtp_printf("421 %s: Service not available - closing connection\r\n",
- smtp_active_hostname);
+smtp_notquit_exit(US"signal-exit", US"421",
+ US"%s: Service not available - closing connection", smtp_active_hostname);
exim_exit(EXIT_FAILURE);
}
+
+#ifdef EXPERIMENTAL_PROXY
+/*************************************************
+* Restore socket timeout to previous value *
+*************************************************/
+/* If the previous value was successfully retrieved, restore
+it before returning control to the non-proxy routines
+
+Arguments: fd - File descriptor for input
+ get_ok - Successfully retrieved previous values
+ tvtmp - Time struct with previous values
+ vslen - Length of time struct
+Returns: none
+*/
+static void
+restore_socket_timeout(int fd, int get_ok, struct timeval tvtmp, socklen_t vslen)
+{
+if (get_ok == 0)
+ setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&tvtmp, vslen);
+}
+
+/*************************************************
+* Check if host is required proxy host *
+*************************************************/
+/* The function determines if inbound host will be a regular smtp host
+or if it is configured that it must use Proxy Protocol.
+
+Arguments: none
+Returns: bool
+*/
+
+static BOOL
+check_proxy_protocol_host()
+{
+int rc;
+/* Cannot configure local connection as a proxy inbound */
+if (sender_host_address == NULL) return proxy_session;
+
+rc = verify_check_this_host(&proxy_required_hosts, NULL, NULL,
+ sender_host_address, NULL);
+if (rc == OK)
+ {
+ DEBUG(D_receive)
+ debug_printf("Detected proxy protocol configured host\n");
+ proxy_session = TRUE;
+ }
+return proxy_session;
+}
+
+
+/*************************************************
+* Setup host for proxy protocol *
+*************************************************/
+/* The function configures the connection based on a header from the
+inbound host to use Proxy Protocol. The specification is very exact
+so exit with an error if do not find the exact required pieces. This
+includes an incorrect number of spaces separating args.
+
+Arguments: none
+Returns: int
+*/
+
+static BOOL
+setup_proxy_protocol_host()
+{
+union {
+ struct {
+ uschar line[108];
+ } v1;
+ struct {
+ uschar sig[12];
+ uint8_t ver_cmd;
+ uint8_t fam;
+ uint16_t len;
+ union {
+ struct { /* TCP/UDP over IPv4, len = 12 */
+ uint32_t src_addr;
+ uint32_t dst_addr;
+ uint16_t src_port;
+ uint16_t dst_port;
+ } ip4;
+ struct { /* TCP/UDP over IPv6, len = 36 */
+ uint8_t src_addr[16];
+ uint8_t dst_addr[16];
+ uint16_t src_port;
+ uint16_t dst_port;
+ } ip6;
+ struct { /* AF_UNIX sockets, len = 216 */
+ uschar src_addr[108];
+ uschar dst_addr[108];
+ } unx;
+ } addr;
+ } v2;
+} hdr;
+
+/* Temp variables used in PPv2 address:port parsing */
+uint16_t tmpport;
+char tmpip[INET_ADDRSTRLEN];
+struct sockaddr_in tmpaddr;
+char tmpip6[INET6_ADDRSTRLEN];
+struct sockaddr_in6 tmpaddr6;
+
+int get_ok = 0;
+int size, ret, fd;
+const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A";
+uschar *iptype; /* To display debug info */
+struct timeval tv;
+socklen_t vslen = 0;
+struct timeval tvtmp;
+
+vslen = sizeof(struct timeval);
+
+fd = fileno(smtp_in);
+
+/* Save current socket timeout values */
+get_ok = getsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&tvtmp,
+ &vslen);
+
+/* Proxy Protocol host must send header within a short time
+(default 3 seconds) or it's considered invalid */
+tv.tv_sec = PROXY_NEGOTIATION_TIMEOUT_SEC;
+tv.tv_usec = PROXY_NEGOTIATION_TIMEOUT_USEC;
+setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&tv,
+ sizeof(struct timeval));
+
+do
+ {
+ /* The inbound host was declared to be a Proxy Protocol host, so
+ don't do a PEEK into the data, actually slurp it up. */
+ ret = recv(fd, &hdr, sizeof(hdr), 0);
+ }
+ while (ret == -1 && errno == EINTR);
+
+if (ret == -1)
+ {
+ restore_socket_timeout(fd, get_ok, tvtmp, vslen);
+ return (errno == EAGAIN) ? 0 : ERRNO_PROXYFAIL;
+ }
+
+if (ret >= 16 &&
+ memcmp(&hdr.v2, v2sig, 12) == 0)
+ {
+ uint8_t ver, cmd;
+
+ /* May 2014: haproxy combined the version and command into one byte to
+ allow two full bytes for the length field in order to proxy SSL
+ connections. SSL Proxy is not supported in this version of Exim, but
+ must still seperate values here. */
+ ver = (hdr.v2.ver_cmd & 0xf0) >> 4;
+ cmd = (hdr.v2.ver_cmd & 0x0f);
+
+ if (ver != 0x02)
+ {
+ DEBUG(D_receive) debug_printf("Invalid Proxy Protocol version: %d\n", ver);
+ goto proxyfail;
+ }
+ DEBUG(D_receive) debug_printf("Detected PROXYv2 header\n");
+ /* The v2 header will always be 16 bytes per the spec. */
+ size = 16 + hdr.v2.len;
+ if (ret < size)
+ {
+ DEBUG(D_receive) debug_printf("Truncated or too large PROXYv2 header (%d/%d)\n",
+ ret, size);
+ goto proxyfail;
+ }
+ switch (cmd)
+ {
+ case 0x01: /* PROXY command */
+ switch (hdr.v2.fam)
+ {
+ case 0x11: /* TCPv4 address type */
+ iptype = US"IPv4";
+ tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.src_addr;
+ inet_ntop(AF_INET, &(tmpaddr.sin_addr), (char *)&tmpip, sizeof(tmpip));
+ if (!string_is_ip_address(US tmpip,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
+ return ERRNO_PROXYFAIL;
+ }
+ proxy_host_address = sender_host_address;
+ sender_host_address = string_copy(US tmpip);
+ tmpport = ntohs(hdr.v2.addr.ip4.src_port);
+ proxy_host_port = sender_host_port;
+ sender_host_port = tmpport;
+ /* Save dest ip/port */
+ tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.dst_addr;
+ inet_ntop(AF_INET, &(tmpaddr.sin_addr), (char *)&tmpip, sizeof(tmpip));
+ if (!string_is_ip_address(US tmpip,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
+ return ERRNO_PROXYFAIL;
+ }
+ proxy_target_address = string_copy(US tmpip);
+ tmpport = ntohs(hdr.v2.addr.ip4.dst_port);
+ proxy_target_port = tmpport;
+ goto done;
+ case 0x21: /* TCPv6 address type */
+ iptype = US"IPv6";
+ memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.src_addr, 16);
+ inet_ntop(AF_INET6, &(tmpaddr6.sin6_addr), (char *)&tmpip6, sizeof(tmpip6));
+ if (!string_is_ip_address(US tmpip6,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
+ return ERRNO_PROXYFAIL;
+ }
+ proxy_host_address = sender_host_address;
+ sender_host_address = string_copy(US tmpip6);
+ tmpport = ntohs(hdr.v2.addr.ip6.src_port);
+ proxy_host_port = sender_host_port;
+ sender_host_port = tmpport;
+ /* Save dest ip/port */
+ memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.dst_addr, 16);
+ inet_ntop(AF_INET6, &(tmpaddr6.sin6_addr), (char *)&tmpip6, sizeof(tmpip6));
+ if (!string_is_ip_address(US tmpip6,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
+ return ERRNO_PROXYFAIL;
+ }
+ proxy_target_address = string_copy(US tmpip6);
+ tmpport = ntohs(hdr.v2.addr.ip6.dst_port);
+ proxy_target_port = tmpport;
+ goto done;
+ default:
+ DEBUG(D_receive)
+ debug_printf("Unsupported PROXYv2 connection type: 0x%02x\n",
+ hdr.v2.fam);
+ goto proxyfail;
+ }
+ /* Unsupported protocol, keep local connection address */
+ break;
+ case 0x00: /* LOCAL command */
+ /* Keep local connection address for LOCAL */
+ break;
+ default:
+ DEBUG(D_receive)
+ debug_printf("Unsupported PROXYv2 command: 0x%x\n", cmd);
+ goto proxyfail;
+ }
+ }
+else if (ret >= 8 &&
+ memcmp(hdr.v1.line, "PROXY", 5) == 0)
+ {
+ uschar *p = string_copy(hdr.v1.line);
+ uschar *end = memchr(p, '\r', ret - 1);
+ uschar *sp; /* Utility variables follow */
+ int tmp_port;
+ char *endc;
+
+ if (!end || end[1] != '\n')
+ {
+ DEBUG(D_receive) debug_printf("Partial or invalid PROXY header\n");
+ goto proxyfail;
+ }
+ *end = '\0'; /* Terminate the string */
+ size = end + 2 - hdr.v1.line; /* Skip header + CRLF */
+ DEBUG(D_receive) debug_printf("Detected PROXYv1 header\n");
+ /* Step through the string looking for the required fields. Ensure
+ strict adherance to required formatting, exit for any error. */
+ p += 5;
+ if (!isspace(*(p++)))
+ {
+ DEBUG(D_receive) debug_printf("Missing space after PROXY command\n");
+ goto proxyfail;
+ }
+ if (!Ustrncmp(p, CCS"TCP4", 4))
+ iptype = US"IPv4";
+ else if (!Ustrncmp(p,CCS"TCP6", 4))
+ iptype = US"IPv6";
+ else if (!Ustrncmp(p,CCS"UNKNOWN", 7))
+ {
+ iptype = US"Unknown";
+ goto done;
+ }
+ else
+ {
+ DEBUG(D_receive) debug_printf("Invalid TCP type\n");
+ goto proxyfail;
+ }
+
+ p += Ustrlen(iptype);
+ if (!isspace(*(p++)))
+ {
+ DEBUG(D_receive) debug_printf("Missing space after TCP4/6 command\n");
+ goto proxyfail;
+ }
+ /* Find the end of the arg */
+ if ((sp = Ustrchr(p, ' ')) == NULL)
+ {
+ DEBUG(D_receive)
+ debug_printf("Did not find proxied src %s\n", iptype);
+ goto proxyfail;
+ }
+ *sp = '\0';
+ if(!string_is_ip_address(p,NULL))
+ {
+ DEBUG(D_receive)
+ debug_printf("Proxied src arg is not an %s address\n", iptype);
+ goto proxyfail;
+ }
+ proxy_host_address = sender_host_address;
+ sender_host_address = p;
+ p = sp + 1;
+ if ((sp = Ustrchr(p, ' ')) == NULL)
+ {
+ DEBUG(D_receive)
+ debug_printf("Did not find proxy dest %s\n", iptype);
+ goto proxyfail;
+ }
+ *sp = '\0';
+ if(!string_is_ip_address(p,NULL))
+ {
+ DEBUG(D_receive)
+ debug_printf("Proxy dest arg is not an %s address\n", iptype);
+ goto proxyfail;
+ }
+ proxy_target_address = p;
+ p = sp + 1;
+ if ((sp = Ustrchr(p, ' ')) == NULL)
+ {
+ DEBUG(D_receive) debug_printf("Did not find proxied src port\n");
+ goto proxyfail;
+ }
+ *sp = '\0';
+ tmp_port = strtol(CCS p,&endc,10);
+ if (*endc || tmp_port == 0)
+ {
+ DEBUG(D_receive)
+ debug_printf("Proxied src port '%s' not an integer\n", p);
+ goto proxyfail;
+ }
+ proxy_host_port = sender_host_port;
+ sender_host_port = tmp_port;
+ p = sp + 1;
+ if ((sp = Ustrchr(p, '\0')) == NULL)
+ {
+ DEBUG(D_receive) debug_printf("Did not find proxy dest port\n");
+ goto proxyfail;
+ }
+ tmp_port = strtol(CCS p,&endc,10);
+ if (*endc || tmp_port == 0)
+ {
+ DEBUG(D_receive)
+ debug_printf("Proxy dest port '%s' not an integer\n", p);
+ goto proxyfail;
+ }
+ proxy_target_port = tmp_port;
+ /* Already checked for /r /n above. Good V1 header received. */
+ goto done;
+ }
+else
+ {
+ /* Wrong protocol */
+ DEBUG(D_receive) debug_printf("Invalid proxy protocol version negotiation\n");
+ goto proxyfail;
+ }
+
+proxyfail:
+restore_socket_timeout(fd, get_ok, tvtmp, vslen);
+/* Don't flush any potential buffer contents. Any input should cause a
+ synchronization failure */
+return FALSE;
+
+done:
+restore_socket_timeout(fd, get_ok, tvtmp, vslen);
+DEBUG(D_receive)
+ debug_printf("Valid %s sender from Proxy Protocol header\n", iptype);
+return proxy_session;
+}
+#endif
+
/*************************************************
* Read one command line *
*************************************************/
for (p = cmd_list; p < cmd_list_end; p++)
{
- if (strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0)
+ #ifdef EXPERIMENTAL_PROXY
+ /* Only allow QUIT command if Proxy Protocol parsing failed */
+ if (proxy_session && proxy_session_failed)
+ {
+ if (p->cmd != QUIT_CMD)
+ continue;
+ }
+ #endif
+ if (strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0 &&
+ (smtp_cmd_buffer[p->len-1] == ':' || /* "mail from:" or "rcpt to:" */
+ smtp_cmd_buffer[p->len] == 0 ||
+ smtp_cmd_buffer[p->len] == ' '))
{
if (smtp_inptr < smtp_inend && /* Outstanding input */
p->cmd < sync_cmd_limit && /* Command should sync */
!sender_host_notsocket) /* Really is a socket */
return BADSYN_CMD;
- /* Point after the command, but don't skip over leading spaces till after
- the following test, so that if it fails, the command name can easily be
- logged. */
+ /* The variables $smtp_command and $smtp_command_argument point into the
+ unmodified input buffer. A copy of the latter is taken for actual
+ processing, so that it can be chopped up into separate parts if necessary,
+ for example, when processing a MAIL command options such as SIZE that can
+ follow the sender address. */
smtp_cmd_argument = smtp_cmd_buffer + p->len;
+ while (isspace(*smtp_cmd_argument)) smtp_cmd_argument++;
+ Ustrcpy(smtp_data_buffer, smtp_cmd_argument);
+ smtp_cmd_data = smtp_data_buffer;
/* Count non-mail commands from those hosts that are controlled in this
way. The default is all hosts. We don't waste effort checking the list
return TOO_MANY_NONMAIL_CMD;
}
- /* Get the data pointer over leading spaces and return; if there is data
- for a command that does not expect it, give the error centrally here. */
+ /* If there is data for a command that does not expect it, generate the
+ error here. */
- while (isspace(*smtp_cmd_argument)) smtp_cmd_argument++;
- return (p->has_arg || *smtp_cmd_argument == 0)? p->cmd : BADARG_CMD;
+ return (p->has_arg || *smtp_cmd_data == 0)? p->cmd : BADARG_CMD;
}
}
+#ifdef EXPERIMENTAL_PROXY
+/* Only allow QUIT command if Proxy Protocol parsing failed */
+if (proxy_session && proxy_session_failed)
+ return PROXY_FAIL_IGNORE_CMD;
+#endif
+
/* Enforce synchronization for unknown commands */
if (smtp_inptr < smtp_inend && /* Outstanding input */
+/*************************************************
+* Recheck synchronization *
+*************************************************/
+
+/* Synchronization checks can never be perfect because a packet may be on its
+way but not arrived when the check is done. Such checks can in any case only be
+done when TLS is not in use. Normally, the checks happen when commands are
+read: Exim ensures that there is no more input in the input buffer. In normal
+cases, the response to the command will be fast, and there is no further check.
+
+However, for some commands an ACL is run, and that can include delays. In those
+cases, it is useful to do another check on the input just before sending the
+response. This also applies at the start of a connection. This function does
+that check by means of the select() function, as long as the facility is not
+disabled or inappropriate. A failure of select() is ignored.
+
+When there is unwanted input, we read it so that it appears in the log of the
+error.
+
+Arguments: none
+Returns: TRUE if all is well; FALSE if there is input pending
+*/
+
+static BOOL
+check_sync(void)
+{
+int fd, rc;
+fd_set fds;
+struct timeval tzero;
+
+if (!smtp_enforce_sync || sender_host_address == NULL ||
+ sender_host_notsocket || tls_in.active >= 0)
+ return TRUE;
+
+fd = fileno(smtp_in);
+FD_ZERO(&fds);
+FD_SET(fd, &fds);
+tzero.tv_sec = 0;
+tzero.tv_usec = 0;
+rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
+
+if (rc <= 0) return TRUE; /* Not ready to read */
+rc = smtp_getc();
+if (rc < 0) return TRUE; /* End of file or error */
+
+smtp_ungetc(rc);
+rc = smtp_inend - smtp_inptr;
+if (rc > 150) rc = 150;
+smtp_inptr[rc] = 0;
+return FALSE;
+}
+
+
+
/*************************************************
* Forced closedown of call *
*************************************************/
except QUIT. The existence of an SMTP call is detected by the non-NULLness of
smtp_in.
-Argument: SMTP reply string to send, excluding the code
+Arguments:
+ message SMTP reply string to send, excluding the code
+
Returns: nothing
*/
+#ifdef SUPPORT_TLS
+/* Append TLS-related information to a log line
+
+Arguments:
+ s String under construction: allocated string to extend, or NULL
+ sizep Pointer to current allocation size (update on return), or NULL
+ ptrp Pointer to index for new entries in string (update on return), or NULL
+
+Returns: Allocated string or NULL
+*/
+static uschar *
+s_tlslog(uschar * s, int * sizep, int * ptrp)
+{
+ int size = sizep ? *sizep : 0;
+ int ptr = ptrp ? *ptrp : 0;
+
+ if ((log_extra_selector & LX_tls_cipher) != 0 && tls_in.cipher != NULL)
+ s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
+ if ((log_extra_selector & LX_tls_certificate_verified) != 0 &&
+ tls_in.cipher != NULL)
+ s = string_append(s, &size, &ptr, 2, US" CV=",
+ tls_in.certificate_verified? "yes":"no");
+ if ((log_extra_selector & LX_tls_peerdn) != 0 && tls_in.peerdn != NULL)
+ s = string_append(s, &size, &ptr, 3, US" DN=\"",
+ string_printing(tls_in.peerdn), US"\"");
+ if ((log_extra_selector & LX_tls_sni) != 0 && tls_in.sni != NULL)
+ s = string_append(s, &size, &ptr, 3, US" SNI=\"",
+ string_printing(tls_in.sni), US"\"");
+
+ if (s)
+ {
+ s[ptr] = '\0';
+ if (sizep) *sizep = size;
+ if (ptrp) *ptrp = ptr;
+ }
+ return s;
+}
+#endif
+
+/*************************************************
+* Log lack of MAIL if so configured *
+*************************************************/
+
+/* This function is called when an SMTP session ends. If the log selector
+smtp_no_mail is set, write a log line giving some details of what has happened
+in the SMTP session.
+
+Arguments: none
+Returns: nothing
+*/
+
+void
+smtp_log_no_mail(void)
+{
+int size, ptr, i;
+uschar *s, *sep;
+
+if (smtp_mailcmd_count > 0 || (log_extra_selector & LX_smtp_no_mail) == 0)
+ return;
+
+s = NULL;
+size = ptr = 0;
+
+if (sender_host_authenticated != NULL)
+ {
+ s = string_append(s, &size, &ptr, 2, US" A=", sender_host_authenticated);
+ if (authenticated_id != NULL)
+ s = string_append(s, &size, &ptr, 2, US":", authenticated_id);
+ }
+
+#ifdef SUPPORT_TLS
+s = s_tlslog(s, &size, &ptr);
+#endif
+
+sep = (smtp_connection_had[SMTP_HBUFF_SIZE-1] != SCH_NONE)?
+ US" C=..." : US" C=";
+for (i = smtp_ch_index; i < SMTP_HBUFF_SIZE; i++)
+ {
+ if (smtp_connection_had[i] != SCH_NONE)
+ {
+ s = string_append(s, &size, &ptr, 2, sep,
+ smtp_names[smtp_connection_had[i]]);
+ sep = US",";
+ }
+ }
+
+for (i = 0; i < smtp_ch_index; i++)
+ {
+ s = string_append(s, &size, &ptr, 2, sep, smtp_names[smtp_connection_had[i]]);
+ sep = US",";
+ }
+
+if (s != NULL) s[ptr] = 0; else s = US"";
+log_write(0, LOG_MAIN, "no MAIL in SMTP connection from %s D=%s%s",
+ host_and_ident(FALSE),
+ readconf_printtime( (int) ((long)time(NULL) - (long)smtp_connection_start)),
+ s);
+}
+
+
+
/*************************************************
* Check HELO line and set sender_helo_name *
*************************************************/
* Extract SMTP command option *
*************************************************/
-/* This function picks the next option setting off the end of smtp_cmd_argument. It
+/* This function picks the next option setting off the end of smtp_cmd_data. It
is called for MAIL FROM and RCPT TO commands, to pick off the optional ESMTP
things that can appear there.
extract_option(uschar **name, uschar **value)
{
uschar *n;
-uschar *v = smtp_cmd_argument + Ustrlen(smtp_cmd_argument) -1;
+uschar *v = smtp_cmd_data + Ustrlen(smtp_cmd_data) - 1;
while (isspace(*v)) v--;
v[1] = 0;
-
-while (v > smtp_cmd_argument && *v != '=' && !isspace(*v)) v--;
-if (*v != '=') return FALSE;
+while (v > smtp_cmd_data && *v != '=' && !isspace(*v)) v--;
n = v;
-while(isalpha(n[-1])) n--;
-
-if (n[-1] != ' ') return FALSE;
-
-n[-1] = 0;
-*name = n;
+if (*v == '=')
+{
+ while(isalpha(n[-1])) n--;
+ /* RFC says SP, but TAB seen in wild and other major MTAs accept it */
+ if (!isspace(n[-1])) return FALSE;
+ n[-1] = 0;
+}
+else
+{
+ n++;
+ if (v == smtp_cmd_data) return FALSE;
+}
*v++ = 0;
+*name = n;
*value = v;
return TRUE;
}
-
-
/*************************************************
* Reset for new message *
*************************************************/
static void
smtp_reset(void *reset_point)
{
-int i;
store_reset(reset_point);
recipients_list = NULL;
rcpt_count = rcpt_defer_count = rcpt_fail_count =
raw_recipients_count = recipients_count = recipients_list_max = 0;
+cancel_cutthrough_connection("smtp reset");
message_linecount = 0;
message_size = -1;
acl_added_headers = NULL;
+acl_removed_headers = NULL;
queue_only_policy = FALSE;
+rcpt_smtp_response = NULL;
+rcpt_smtp_response_same = TRUE;
+rcpt_in_progress = FALSE;
deliver_freeze = FALSE; /* Can be set by ACL */
freeze_tell = freeze_tell_config; /* Can be set by ACL */
fake_response = OK; /* Can be set by ACL */
no_mbox_unspool = FALSE; /* Can be set by ACL */
#endif
submission_mode = FALSE; /* Can be set by ACL */
-suppress_local_fixups = FALSE; /* Can be set by ACL */
+suppress_local_fixups = suppress_local_fixups_default; /* Can be set by ACL */
active_local_from_check = local_from_check; /* Can be set by ACL */
active_local_sender_retain = local_sender_retain; /* Can be set by ACL */
sender_address = NULL;
sender_verified_list = NULL; /* No senders verified */
memset(sender_address_cache, 0, sizeof(sender_address_cache));
memset(sender_domain_cache, 0, sizeof(sender_domain_cache));
+
+/* Reset the DSN flags */
+dsn_ret = 0;
+dsn_envid = NULL;
+
authenticated_sender = NULL;
#ifdef EXPERIMENTAL_BRIGHTMAIL
bmi_run = 0;
bmi_verdicts = NULL;
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
-dk_do_verify = 0;
+#ifndef DISABLE_DKIM
+dkim_signers = NULL;
+dkim_disable_verify = FALSE;
+dkim_collect_input = FALSE;
#endif
#ifdef EXPERIMENTAL_SPF
spf_header_comment = NULL;
ratelimiters_mail = NULL; /* Updated by ratelimit ACL condition */
/* Note that ratelimiters_conn persists across resets. */
-/* The message variables follow the connection variables. */
+/* Reset message ACL variables */
-for (i = 0; i < ACL_MVARS; i++) acl_var[ACL_CVARS + i] = NULL;
+acl_var_m = NULL;
/* The message body variables use malloc store. They may be set if this is
not the first message in an SMTP session and the previous message caused them
/* Warning log messages are also saved in malloc store. They are saved to avoid
repetition in the same message, but it seems right to repeat them for different
-messagess. */
+messages. */
while (acl_warn_logged != NULL)
{
case HELO_CMD:
case EHLO_CMD:
- check_helo(smtp_cmd_argument);
+ check_helo(smtp_cmd_data);
/* Fall through */
case RSET_CMD:
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
- if (smtp_cmd_argument[0] == 0)
+ if (smtp_cmd_data[0] == 0)
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "501 MAIL FROM must have an address operand");
/* Apply SMTP rewrite */
raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_argument, rewrite_smtp|rewrite_smtp_sender, NULL, FALSE,
- US"", global_rewrite_rules) : smtp_cmd_argument;
+ rewrite_one(smtp_cmd_data, rewrite_smtp|rewrite_smtp_sender, NULL, FALSE,
+ US"", global_rewrite_rules) : smtp_cmd_data;
/* Extract the address; the TRUE flag allows <> as valid */
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "503 No sender yet given");
- if (smtp_cmd_argument[0] == 0)
+ if (smtp_cmd_data[0] == 0)
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "501 RCPT TO must have an address operand");
recipient address */
recipient = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_argument, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_argument;
+ rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules) : smtp_cmd_data;
/* rfc821_domains = TRUE; << no longer needed */
recipient = parse_extract_address(recipient, &errmess, &start, &end,
smtp_start_session(void)
{
int size = 256;
-int i, ptr;
+int ptr, esclen;
+uschar *user_msg, *log_msg;
+uschar *code, *esc;
uschar *p, *s, *ss;
+smtp_connection_start = time(NULL);
+for (smtp_ch_index = 0; smtp_ch_index < SMTP_HBUFF_SIZE; smtp_ch_index++)
+ smtp_connection_had[smtp_ch_index] = SCH_NONE;
+smtp_ch_index = 0;
+
/* Default values for certain variables */
helo_seen = esmtp = helo_accept_junk = FALSE;
+smtp_mailcmd_count = 0;
count_nonmail = TRUE_UNSET;
synprot_error_count = unknown_command_count = nonmail_command_count = 0;
smtp_delay_mail = smtp_rlm_base;
auth_advertised = FALSE;
pipelining_advertised = FALSE;
+pipelining_enable = TRUE;
sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
+smtp_exit_function_called = FALSE; /* For avoiding loop in not-quit exit */
memset(sender_host_cache, 0, sizeof(sender_host_cache));
-sender_host_authenticated = NULL;
+/* If receiving by -bs from a trusted user, or testing with -bh, we allow
+authentication settings from -oMaa to remain in force. */
+
+if (!host_checking && !sender_host_notsocket) sender_host_authenticated = NULL;
authenticated_by = NULL;
#ifdef SUPPORT_TLS
-tls_cipher = tls_peerdn = NULL;
+tls_in.cipher = tls_in.peerdn = NULL;
+tls_in.ourcert = tls_in.peercert = NULL;
+tls_in.sni = NULL;
+tls_in.ocsp = OCSP_NOT_REQ;
tls_advertised = FALSE;
#endif
+dsn_advertised = FALSE;
/* Reset ACL connection variables */
-for (i = 0; i < ACL_CVARS; i++) acl_var[i] = NULL;
+acl_var_c = NULL;
-/* Allow for trailing 0 in the command buffer. */
+/* Allow for trailing 0 in the command and data buffers. */
-smtp_cmd_buffer = (uschar *)malloc(smtp_cmd_buffer_size + 1);
+smtp_cmd_buffer = (uschar *)malloc(2*smtp_cmd_buffer_size + 2);
if (smtp_cmd_buffer == NULL)
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"malloc() failed for SMTP command buffer");
+smtp_cmd_buffer[0] = 0;
+smtp_data_buffer = smtp_cmd_buffer + smtp_cmd_buffer_size + 1;
/* For batched input, the protocol setting can be overridden from the
command line by a trusted caller. */
receive_ungetc = smtp_ungetc;
receive_feof = smtp_feof;
receive_ferror = smtp_ferror;
+receive_smtp_buffered = smtp_buffered;
smtp_inptr = smtp_inend = smtp_inbuffer;
smtp_had_eof = smtp_had_error = 0;
/* Set up the message size limit; this may be host-specific */
-thismessage_size_limit = expand_string_integer(message_size_limit);
-if (thismessage_size_limit < 0)
+thismessage_size_limit = expand_string_integer(message_size_limit, TRUE);
+if (expand_string_message != NULL)
{
if (thismessage_size_limit == -1)
log_write(0, LOG_MAIN|LOG_PANIC, "unable to expand message_size_limit: "
set_process_info("handling incoming connection from %s",
host_and_ident(FALSE));
+ /* Expand smtp_receive_timeout, if needed */
+
+ if (smtp_receive_timeout_s)
+ {
+ uschar * exp;
+ if ( !(exp = expand_string(smtp_receive_timeout_s))
+ || !(*exp)
+ || (smtp_receive_timeout = readconf_readtime(exp, 0, FALSE)) < 0
+ )
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "bad value for smtp_receive_timeout: '%s'", exp ? exp : US"");
+ }
+
/* Start up TLS if tls_on_connect is set. This is for supporting the legacy
smtps port for use with older style SSL MTAs. */
#ifdef SUPPORT_TLS
- if (tls_on_connect && tls_server_start(tls_require_ciphers) != OK)
+ if (tls_in.on_connect && tls_server_start(tls_require_ciphers) != OK)
return FALSE;
#endif
#ifdef USE_TCP_WRAPPERS
errno = 0;
- if (!hosts_ctl("exim",
+ tcp_wrappers_name = expand_string(tcp_wrappers_daemon_name);
+ if (tcp_wrappers_name == NULL)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" "
+ "(tcp_wrappers_name) failed: %s", string_printing(tcp_wrappers_name),
+ expand_string_message);
+ }
+ if (!hosts_ctl(tcp_wrappers_name,
(sender_host_name == NULL)? STRING_UNKNOWN : CS sender_host_name,
(sender_host_address == NULL)? STRING_UNKNOWN : CS sender_host_address,
(sender_ident == NULL)? STRING_UNKNOWN : CS sender_ident))
}
#endif
- /* Check for reserved slots. Note that the count value doesn't include
- this process, as it gets upped in the parent process. */
+ /* Check for reserved slots. The value of smtp_accept_count has already been
+ incremented to include this process. */
if (smtp_accept_max > 0 &&
- smtp_accept_count + 1 > smtp_accept_max - smtp_accept_reserve)
+ smtp_accept_count > smtp_accept_max - smtp_accept_reserve)
{
if ((rc = verify_check_host(&smtp_reserve_hosts)) != OK)
{
log_write(L_connection_reject,
LOG_MAIN, "temporarily refused connection from %s: not in "
"reserve list: connected=%d max=%d reserve=%d%s",
- host_and_ident(FALSE), smtp_accept_count, smtp_accept_max,
+ host_and_ident(FALSE), smtp_accept_count - 1, smtp_accept_max,
smtp_accept_reserve, (rc == DEFER)? " (lookup deferred)" : "");
smtp_printf("421 %s: Too many concurrent SMTP connections; "
"please try again later\r\n", smtp_active_hostname);
if (smtp_batched_input) return TRUE;
+#ifdef EXPERIMENTAL_PROXY
+/* If valid Proxy Protocol source is connecting, set up session.
+ * Failure will not allow any SMTP function other than QUIT. */
+proxy_session = FALSE;
+proxy_session_failed = FALSE;
+if (check_proxy_protocol_host())
+ {
+ if (setup_proxy_protocol_host() == FALSE)
+ {
+ proxy_session_failed = TRUE;
+ DEBUG(D_receive)
+ debug_printf("Failure to extract proxied host, only QUIT allowed\n");
+ }
+ else
+ {
+ sender_host_name = NULL;
+ (void)host_name_lookup();
+ host_build_sender_fullhost();
+ }
+ }
+#endif
+
/* Run the ACL if it exists */
+user_msg = NULL;
if (acl_smtp_connect != NULL)
{
int rc;
- uschar *user_msg, *log_msg;
rc = acl_check(ACL_WHERE_CONNECT, NULL, acl_smtp_connect, &user_msg,
&log_msg);
if (rc != OK)
/* Output the initial message for a two-way SMTP connection. It may contain
newlines, which then cause a multi-line response to be given. */
-s = expand_string(smtp_banner);
-if (s == NULL)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" (smtp_banner) "
- "failed: %s", smtp_banner, expand_string_message);
+code = US"220"; /* Default status code */
+esc = US""; /* Default extended status code */
+esclen = 0; /* Length of esc */
+
+if (user_msg == NULL)
+ {
+ s = expand_string(smtp_banner);
+ if (s == NULL)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" (smtp_banner) "
+ "failed: %s", smtp_banner, expand_string_message);
+ }
+else
+ {
+ int codelen = 3;
+ s = user_msg;
+ smtp_message_code(&code, &codelen, &s, NULL);
+ if (codelen > 4)
+ {
+ esc = code + 4;
+ esclen = codelen - 4;
+ }
+ }
/* Remove any terminating newlines; might as well remove trailing space too */
{
int len;
uschar *linebreak = Ustrchr(p, '\n');
+ ss = string_cat(ss, &size, &ptr, code, 3);
if (linebreak == NULL)
{
len = Ustrlen(p);
- ss = string_cat(ss, &size, &ptr, US"220 ", 4);
+ ss = string_cat(ss, &size, &ptr, US" ", 1);
}
else
{
len = linebreak - p;
- ss = string_cat(ss, &size, &ptr, US"220-", 4);
+ ss = string_cat(ss, &size, &ptr, US"-", 1);
}
+ ss = string_cat(ss, &size, &ptr, esc, esclen);
ss = string_cat(ss, &size, &ptr, p, len);
ss = string_cat(ss, &size, &ptr, US"\r\n", 2);
p += len;
/* Before we write the banner, check that there is no input pending, unless
this synchronisation check is disabled. */
-if (smtp_enforce_sync && sender_host_address != NULL && !sender_host_notsocket)
+if (!check_sync())
{
- fd_set fds;
- struct timeval tzero;
- tzero.tv_sec = 0;
- tzero.tv_usec = 0;
- FD_ZERO(&fds);
- FD_SET(fileno(smtp_in), &fds);
- if (select(fileno(smtp_in) + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL,
- &tzero) > 0)
- {
- int rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size);
- if (rc > 0)
- {
- if (rc > 150) rc = 150;
- smtp_inbuffer[rc] = 0;
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol "
- "synchronization error (input sent without waiting for greeting): "
- "rejected connection from %s input=\"%s\"", host_and_ident(TRUE),
- string_printing(smtp_inbuffer));
- smtp_printf("554 SMTP synchronization error\r\n");
- return FALSE;
- }
- }
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol "
+ "synchronization error (input sent without waiting for greeting): "
+ "rejected connection from %s input=\"%s\"", host_and_ident(TRUE),
+ string_printing(smtp_inptr));
+ smtp_printf("554 SMTP synchronization error\r\n");
+ return FALSE;
}
/* Now output the banner */
output nothing for non-final calls, and only the first line for anything else.
Arguments:
- code SMTP code
+ code SMTP code, may involve extended status codes
+ codelen length of smtp code; if > 4 there's an ESC
final FALSE if the last line isn't the final line
msg message text, possibly containing newlines
*/
void
-smtp_respond(int code, BOOL final, uschar *msg)
+smtp_respond(uschar* code, int codelen, BOOL final, uschar *msg)
{
+int esclen = 0;
+uschar *esc = US"";
+
if (!final && no_multiline_responses) return;
+if (codelen > 4)
+ {
+ esc = code + 4;
+ esclen = codelen - 4;
+ }
+
+/* If this is the first output for a (non-batch) RCPT command, see if all RCPTs
+have had the same. Note: this code is also present in smtp_printf(). It would
+be tidier to have it only in one place, but when it was added, it was easier to
+do it that way, so as not to have to mess with the code for the RCPT command,
+which sometimes uses smtp_printf() and sometimes smtp_respond(). */
+
+if (rcpt_in_progress)
+ {
+ if (rcpt_smtp_response == NULL)
+ rcpt_smtp_response = string_copy(msg);
+ else if (rcpt_smtp_response_same &&
+ Ustrcmp(rcpt_smtp_response, msg) != 0)
+ rcpt_smtp_response_same = FALSE;
+ rcpt_in_progress = FALSE;
+ }
+
+/* Not output the message, splitting it up into multiple lines if necessary. */
+
for (;;)
{
uschar *nl = Ustrchr(msg, '\n');
if (nl == NULL)
{
- smtp_printf("%d%c%s\r\n", code, final? ' ':'-', msg);
+ smtp_printf("%.3s%c%.*s%s\r\n", code, final? ' ':'-', esclen, esc, msg);
return;
}
else if (nl[1] == 0 || no_multiline_responses)
{
- smtp_printf("%d%c%.*s\r\n", code, final? ' ':'-', (int)(nl - msg), msg);
+ smtp_printf("%.3s%c%.*s%.*s\r\n", code, final? ' ':'-', esclen, esc,
+ (int)(nl - msg), msg);
return;
}
else
{
- smtp_printf("%d-%.*s\r\n", code, (int)(nl - msg), msg);
+ smtp_printf("%.3s-%.*s%.*s\r\n", code, esclen, esc, (int)(nl - msg), msg);
msg = nl + 1;
while (isspace(*msg)) msg++;
}
+/*************************************************
+* Parse user SMTP message *
+*************************************************/
+
+/* This function allows for user messages overriding the response code details
+by providing a suitable response code string at the start of the message
+user_msg. Check the message for starting with a response code and optionally an
+extended status code. If found, check that the first digit is valid, and if so,
+change the code pointer and length to use the replacement. An invalid code
+causes a panic log; in this case, if the log messages is the same as the user
+message, we must also adjust the value of the log message to show the code that
+is actually going to be used (the original one).
+
+This function is global because it is called from receive.c as well as within
+this module.
+
+Note that the code length returned includes the terminating whitespace
+character, which is always included in the regex match.
+
+Arguments:
+ code SMTP code, may involve extended status codes
+ codelen length of smtp code; if > 4 there's an ESC
+ msg message text
+ log_msg optional log message, to be adjusted with the new SMTP code
+
+Returns: nothing
+*/
+
+void
+smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg)
+{
+int n;
+int ovector[3];
+
+if (msg == NULL || *msg == NULL) return;
+
+n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
+ PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int));
+if (n < 0) return;
+
+if ((*msg)[0] != (*code)[0])
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "configured error code starts with "
+ "incorrect digit (expected %c) in \"%s\"", (*code)[0], *msg);
+ if (log_msg != NULL && *log_msg == *msg)
+ *log_msg = string_sprintf("%s %s", *code, *log_msg + ovector[1]);
+ }
+else
+ {
+ *code = *msg;
+ *codelen = ovector[1]; /* Includes final space */
+ }
+*msg += ovector[1]; /* Chop the code off the message */
+return;
+}
+
+
+
+
/*************************************************
* Handle an ACL failure *
*************************************************/
newlines is turned into a multiline SMTP response, but for logging, only the
first line is used.
-There's a table of the response codes to use in globals.c, along with the table
-of names. VFRY is special. Despite RFC1123 it defaults disabled in Exim.
-However, discussion in connection with RFC 821bis (aka RFC 2821) has concluded
-that the response should be 252 in the disabled state, because there are broken
-clients that try VRFY before RCPT. A 5xx response should be given only when the
-address is positively known to be undeliverable. Sigh. Also, for ETRN, 458 is
-given on refusal, and for AUTH, 503.
+There's a table of default permanent failure response codes to use in
+globals.c, along with the table of names. VFRY is special. Despite RFC1123 it
+defaults disabled in Exim. However, discussion in connection with RFC 821bis
+(aka RFC 2821) has concluded that the response should be 252 in the disabled
+state, because there are broken clients that try VRFY before RCPT. A 5xx
+response should be given only when the address is positively known to be
+undeliverable. Sigh. Also, for ETRN, 458 is given on refusal, and for AUTH,
+503.
+
+From Exim 4.63, it is possible to override the response code details by
+providing a suitable response code string at the start of the message provided
+in user_msg. The code's first digit is checked for validity.
Arguments:
where where the ACL was called from
int
smtp_handle_acl_fail(int where, int rc, uschar *user_msg, uschar *log_msg)
{
-int code = acl_wherecodes[where];
BOOL drop = rc == FAIL_DROP;
+int codelen = 3;
+uschar *smtp_code;
uschar *lognl;
uschar *sender_info = US"";
uschar *what =
#endif
(where == ACL_WHERE_PREDATA)? US"DATA" :
(where == ACL_WHERE_DATA)? US"after DATA" :
- (smtp_cmd_argument == NULL)?
+#ifndef DISABLE_PRDR
+ (where == ACL_WHERE_PRDR)? US"after DATA PRDR" :
+#endif
+ (smtp_cmd_data == NULL)?
string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]) :
- string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_argument);
+ string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data);
if (drop) rc = FAIL;
+/* Set the default SMTP code, and allow a user message to change it. */
+
+smtp_code = (rc != FAIL)? US"451" : acl_wherecodes[where];
+smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg);
+
/* We used to have sender_address here; however, there was a bug that was not
updating sender_address after a rewrite during a verify. When this bug was
fixed, sender_address at this point became the rewritten address. I'm not sure
if (where == ACL_WHERE_RCPT || where == ACL_WHERE_DATA || where == ACL_WHERE_MIME)
#endif
{
- sender_info = string_sprintf("F=<%s> ", (sender_address_unrewritten != NULL)?
- sender_address_unrewritten : sender_address);
+ sender_info = string_sprintf("F=<%s>%s%s%s%s ",
+ sender_address_unrewritten ? sender_address_unrewritten : sender_address,
+ sender_host_authenticated ? US" A=" : US"",
+ sender_host_authenticated ? sender_host_authenticated : US"",
+ sender_host_authenticated && authenticated_id ? US":" : US"",
+ sender_host_authenticated && authenticated_id ? authenticated_id : US""
+ );
}
/* If there's been a sender verification failure with a specific message, and
if (sender_verified_failed != NULL &&
!testflag(sender_verified_failed, af_sverify_told))
{
+ BOOL save_rcpt_in_progress = rcpt_in_progress;
+ rcpt_in_progress = FALSE; /* So as not to treat these as the error */
+
setflag(sender_verified_failed, af_sverify_told);
if (rc != FAIL || (log_extra_selector & LX_sender_verify_fail) != 0)
string_sprintf(": %s", sender_verified_failed->message));
if (rc == FAIL && sender_verified_failed->user_message != NULL)
- smtp_respond(code, FALSE, string_sprintf(
+ smtp_respond(smtp_code, codelen, FALSE, string_sprintf(
testflag(sender_verified_failed, af_verify_pmfail)?
"Postmaster verification failed while checking <%s>\n%s\n"
"Several RFCs state that you are required to have a postmaster\n"
"Verification failed for <%s>\n%s",
sender_verified_failed->address,
sender_verified_failed->user_message));
+
+ rcpt_in_progress = save_rcpt_in_progress;
}
/* Sort out text for logging */
always a 5xx one - see comments at the start of this function. If the original
rc was FAIL_DROP we drop the connection and yield 2. */
-if (rc == FAIL) smtp_respond(code, TRUE, (user_msg == NULL)?
+if (rc == FAIL) smtp_respond(smtp_code, codelen, TRUE, (user_msg == NULL)?
US"Administrative prohibition" : user_msg);
/* Send temporary failure response to the command. Don't give any details,
sender_verified_failed != NULL &&
sender_verified_failed->message != NULL)
{
- smtp_respond(451, FALSE, sender_verified_failed->message);
+ smtp_respond(smtp_code, codelen, FALSE, sender_verified_failed->message);
}
- smtp_respond(451, TRUE, user_msg);
+ smtp_respond(smtp_code, codelen, TRUE, user_msg);
}
else
- smtp_printf("451 Temporary local problem - please try later\r\n");
+ smtp_respond(smtp_code, codelen, TRUE,
+ US"Temporary local problem - please try later");
}
-/* Log the incident. If the connection is not forcibly to be dropped, return 0.
-Otherwise, log why it is closing if required and return 2. */
+/* Log the incident to the logs that are specified by log_reject_target
+(default main, reject). This can be empty to suppress logging of rejections. If
+the connection is not forcibly to be dropped, return 0. Otherwise, log why it
+is closing if required and return 2. */
-log_write(0, LOG_MAIN|LOG_REJECT, "%s %s%srejected %s%s",
- host_and_ident(TRUE),
- sender_info, (rc == FAIL)? US"" : US"temporarily ", what, log_msg);
+if (log_reject_target != 0)
+ {
+#ifdef SUPPORT_TLS
+ uschar * s = s_tlslog(NULL, NULL, NULL);
+ if (!s) s = US"";
+#else
+ uschar * s = US"";
+#endif
+ log_write(0, log_reject_target, "%s%s %s%srejected %s%s",
+ host_and_ident(TRUE), s,
+ sender_info, (rc == FAIL)? US"" : US"temporarily ", what, log_msg);
+ }
if (!drop) return 0;
log_write(L_smtp_connection, LOG_MAIN, "%s closed by DROP in ACL",
smtp_get_connection_info());
+
+/* Run the not-quit ACL, but without any custom messages. This should not be a
+problem, because we get here only if some other ACL has issued "drop", and
+in that case, *its* custom messages will have been used above. */
+
+smtp_notquit_exit(US"acl-drop", NULL, NULL);
return 2;
}
+/*************************************************
+* Handle SMTP exit when QUIT is not given *
+*************************************************/
+
+/* This function provides a logging/statistics hook for when an SMTP connection
+is dropped on the floor or the other end goes away. It's a global function
+because it's called from receive.c as well as this module. As well as running
+the NOTQUIT ACL, if there is one, this function also outputs a final SMTP
+response, either with a custom message from the ACL, or using a default. There
+is one case, however, when no message is output - after "drop". In that case,
+the ACL that obeyed "drop" has already supplied the custom message, and NULL is
+passed to this function.
+
+In case things go wrong while processing this function, causing an error that
+may re-enter this funtion, there is a recursion check.
+
+Arguments:
+ reason What $smtp_notquit_reason will be set to in the ACL;
+ if NULL, the ACL is not run
+ code The error code to return as part of the response
+ defaultrespond The default message if there's no user_msg
+
+Returns: Nothing
+*/
+
+void
+smtp_notquit_exit(uschar *reason, uschar *code, uschar *defaultrespond, ...)
+{
+int rc;
+uschar *user_msg = NULL;
+uschar *log_msg = NULL;
+
+/* Check for recursive acll */
+
+if (smtp_exit_function_called)
+ {
+ log_write(0, LOG_PANIC, "smtp_notquit_exit() called more than once (%s)",
+ reason);
+ return;
+ }
+smtp_exit_function_called = TRUE;
+
+/* Call the not-QUIT ACL, if there is one, unless no reason is given. */
+
+if (acl_smtp_notquit != NULL && reason != NULL)
+ {
+ smtp_notquit_reason = reason;
+ rc = acl_check(ACL_WHERE_NOTQUIT, NULL, acl_smtp_notquit, &user_msg,
+ &log_msg);
+ if (rc == ERROR)
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for not-QUIT returned ERROR: %s",
+ log_msg);
+ }
+
+/* Write an SMTP response if we are expected to give one. As the default
+responses are all internal, they should always fit in the buffer, but code a
+warning, just in case. Note that string_vformat() still leaves a complete
+string, even if it is incomplete. */
+
+if (code != NULL && defaultrespond != NULL)
+ {
+ if (user_msg == NULL)
+ {
+ uschar buffer[128];
+ va_list ap;
+ va_start(ap, defaultrespond);
+ if (!string_vformat(buffer, sizeof(buffer), CS defaultrespond, ap))
+ log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_notquit_exit()");
+ smtp_printf("%s %s\r\n", code, buffer);
+ va_end(ap);
+ }
+ else
+ smtp_respond(code, 3, TRUE, user_msg);
+ mac_smtp_fflush();
+ }
+}
+
+
+
+
/*************************************************
* Verify HELO argument *
*************************************************/
HDEBUG(D_receive) debug_printf("no EHLO/HELO command was issued\n");
}
+/* Deal with the case of -bs without an IP address */
+
+else if (sender_host_address == NULL)
+ {
+ HDEBUG(D_receive) debug_printf("no client IP address: assume success\n");
+ helo_verified = TRUE;
+ }
+
+/* Deal with the more common case when there is a sending IP address */
+
else if (sender_helo_name[0] == '[')
{
helo_verified = Ustrncmp(sender_helo_name+1, sender_host_address,
h.next = NULL;
HDEBUG(D_receive) debug_printf("getting IP address for %s\n",
sender_helo_name);
- rc = host_find_byname(&h, NULL, NULL, TRUE);
+ rc = host_find_byname(&h, NULL, 0, NULL, TRUE);
if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL)
{
host_item *hh = &h;
}
}
-if (!helo_verified) helo_verify_failed = FALSE; /* We've tried ... */
+if (!helo_verified) helo_verify_failed = TRUE; /* We've tried ... */
return yield;
}
+/*************************************************
+* Send user response message *
+*************************************************/
+
+/* This function is passed a default response code and a user message. It calls
+smtp_message_code() to check and possibly modify the response code, and then
+calls smtp_respond() to transmit the response. I put this into a function
+just to avoid a lot of repetition.
+
+Arguments:
+ code the response code
+ user_msg the user message
+
+Returns: nothing
+*/
+
+static void
+smtp_user_msg(uschar *code, uschar *user_msg)
+{
+int len = 3;
+smtp_message_code(&code, &len, &user_msg, NULL);
+smtp_respond(code, len, TRUE, user_msg);
+}
+
+
+
/*************************************************
* Initialize for SMTP incoming message *
*************************************************/
while (done <= 0)
{
- uschar **argv;
+ const uschar **argv;
uschar *etrn_command;
uschar *etrn_serialize_key;
uschar *errmess;
- uschar *user_msg, *log_msg;
+ uschar *log_msg, *smtp_code;
+ uschar *user_msg = NULL;
uschar *recipient = NULL;
uschar *hello = NULL;
- uschar *set_id = NULL;
+ const uschar *set_id = NULL;
uschar *s, *ss;
BOOL was_rej_mail = FALSE;
BOOL was_rcpt = FALSE;
int ptr, size, rc;
int c, i;
auth_instance *au;
+ uschar *orcpt = NULL;
+ int flags;
switch(smtp_read_command(TRUE))
{
AUTHS will eventually hit the nonmail threshold. */
case AUTH_CMD:
+ HAD(SCH_AUTH);
authentication_failed = TRUE;
cmd_list[CMD_LIST_AUTH].is_mail_cmd = FALSE;
/* Find the name of the requested authentication mechanism. */
- s = smtp_cmd_argument;
- while ((c = *smtp_cmd_argument) != 0 && !isspace(c))
+ s = smtp_cmd_data;
+ while ((c = *smtp_cmd_data) != 0 && !isspace(c))
{
if (!isalnum(c) && c != '-' && c != '_')
{
US"invalid character in authentication mechanism name");
goto COMMAND_LOOP;
}
- smtp_cmd_argument++;
+ smtp_cmd_data++;
}
/* If not at the end of the line, we must be at white space. Terminate the
name and move the pointer on to any data that may be present. */
- if (*smtp_cmd_argument != 0)
+ if (*smtp_cmd_data != 0)
{
- *smtp_cmd_argument++ = 0;
- while (isspace(*smtp_cmd_argument)) smtp_cmd_argument++;
+ *smtp_cmd_data++ = 0;
+ while (isspace(*smtp_cmd_data)) smtp_cmd_data++;
}
/* Search for an authentication mechanism which is configured for use
expand_nmax = 0;
expand_nlength[0] = 0; /* $0 contains nothing */
- c = (au->info->servercode)(au, smtp_cmd_argument);
+ c = (au->info->servercode)(au, smtp_cmd_data);
if (au->set_id != NULL) set_id = expand_string(au->set_id);
expand_nmax = -1; /* Reset numeric variables */
for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
if (set_id != NULL) authenticated_id = string_copy_malloc(set_id);
sender_host_authenticated = au->name;
authentication_failed = FALSE;
+ authenticated_fail_id = NULL; /* Impossible to already be set? */
received_protocol =
- protocols[pextend + pauthed + ((tls_active >= 0)? pcrpted:0)] +
+ protocols[pextend + pauthed + ((tls_in.active >= 0)? pcrpted:0)] +
((sender_host_address != NULL)? pnlocal : 0);
s = ss = US"235 Authentication succeeded";
authenticated_by = au;
/* Fall through */
case DEFER:
+ if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
s = string_sprintf("435 Unable to authenticate at present%s",
auth_defer_user_msg);
ss = string_sprintf("435 Unable to authenticate at present%s: %s",
break;
case FAIL:
+ if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
s = US"535 Incorrect authentication data";
ss = string_sprintf("535 Incorrect authentication data%s", set_id);
break;
default:
+ if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
s = US"435 Internal error";
ss = string_sprintf("435 Internal error%s: return %d from authentication "
"check", set_id, c);
it did the reset first. */
case HELO_CMD:
+ HAD(SCH_HELO);
hello = US"HELO";
esmtp = FALSE;
goto HELO_EHLO;
case EHLO_CMD:
+ HAD(SCH_EHLO);
hello = US"EHLO";
esmtp = TRUE;
/* Reject the HELO if its argument was invalid or non-existent. A
successful check causes the argument to be saved in malloc store. */
- if (!check_helo(smtp_cmd_argument))
+ if (!check_helo(smtp_cmd_data))
{
smtp_printf("501 Syntactically invalid %s argument(s)\r\n", hello);
if (!sender_host_unknown)
{
BOOL old_helo_verified = helo_verified;
- uschar *p = smtp_cmd_argument;
+ uschar *p = smtp_cmd_data;
while (*p != 0 && !isspace(*p)) { *p = tolower(*p); p++; }
*p = 0;
if (sender_host_name == NULL &&
(deliver_domain = sender_helo_name, /* set $domain */
- match_isinlist(sender_helo_name, &helo_lookup_domains, 0,
+ match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
&domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
(void)host_name_lookup();
host_build_sender_fullhost(); /* Rebuild */
set_process_info("handling%s incoming connection from %s",
- (tls_active >= 0)? " TLS" : "", host_and_ident(FALSE));
+ (tls_in.active >= 0)? " TLS" : "", host_and_ident(FALSE));
/* Verify if configured. This doesn't give much security, but it does
make some people happy to be able to do it. If helo_required is set,
spf_init(sender_helo_name, sender_host_address);
#endif
- /* Apply an ACL check if one is defined */
+ /* Apply an ACL check if one is defined; afterwards, recheck
+ synchronization in case the client started sending in a delay. */
if (acl_smtp_helo != NULL)
{
host_build_sender_fullhost(); /* Rebuild */
break;
}
+ else if (!check_sync()) goto SYNC_FAILURE;
}
- /* The EHLO/HELO command is acceptable. Reset the protocol and the state,
- abandoning any previous message. */
-
- received_protocol = (esmtp?
- protocols[pextend +
- ((sender_host_authenticated != NULL)? pauthed : 0) +
- ((tls_active >= 0)? pcrpted : 0)]
- :
- protocols[pnormal + ((tls_active >= 0)? pcrpted : 0)])
- +
- ((sender_host_address != NULL)? pnlocal : 0);
-
- smtp_reset(reset_point);
- toomany = FALSE;
-
- /* Generate an OK reply, including the ident if present, and also
- the IP address if present. Reflecting back the ident is intended
- as a deterrent to mail forgers. For maximum efficiency, and also
- because some broken systems expect each response to be in a single
- packet, arrange that it is sent in one write(). */
+ /* Generate an OK reply. The default string includes the ident if present,
+ and also the IP address if present. Reflecting back the ident is intended
+ as a deterrent to mail forgers. For maximum efficiency, and also because
+ some broken systems expect each response to be in a single packet, arrange
+ that the entire reply is sent in one write(). */
auth_advertised = FALSE;
pipelining_advertised = FALSE;
#ifdef SUPPORT_TLS
tls_advertised = FALSE;
#endif
+ dsn_advertised = FALSE;
- s = string_sprintf("250 %s Hello %s%s%s",
- smtp_active_hostname,
- (sender_ident == NULL)? US"" : sender_ident,
- (sender_ident == NULL)? US"" : US" at ",
- (sender_host_name == NULL)? sender_helo_name : sender_host_name);
+ smtp_code = US"250 "; /* Default response code plus space*/
+ if (user_msg == NULL)
+ {
+ s = string_sprintf("%.3s %s Hello %s%s%s",
+ smtp_code,
+ smtp_active_hostname,
+ (sender_ident == NULL)? US"" : sender_ident,
+ (sender_ident == NULL)? US"" : US" at ",
+ (sender_host_name == NULL)? sender_helo_name : sender_host_name);
+
+ ptr = Ustrlen(s);
+ size = ptr + 1;
+
+ if (sender_host_address != NULL)
+ {
+ s = string_cat(s, &size, &ptr, US" [", 2);
+ s = string_cat(s, &size, &ptr, sender_host_address,
+ Ustrlen(sender_host_address));
+ s = string_cat(s, &size, &ptr, US"]", 1);
+ }
+ }
- ptr = Ustrlen(s);
- size = ptr + 1;
+ /* A user-supplied EHLO greeting may not contain more than one line. Note
+ that the code returned by smtp_message_code() includes the terminating
+ whitespace character. */
- if (sender_host_address != NULL)
+ else
{
- s = string_cat(s, &size, &ptr, US" [", 2);
- s = string_cat(s, &size, &ptr, sender_host_address,
- Ustrlen(sender_host_address));
- s = string_cat(s, &size, &ptr, US"]", 1);
+ char *ss;
+ int codelen = 4;
+ smtp_message_code(&smtp_code, &codelen, &user_msg, NULL);
+ s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
+ if ((ss = strpbrk(CS s, "\r\n")) != NULL)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "EHLO/HELO response must not contain "
+ "newlines: message truncated: %s", string_printing(s));
+ *ss = 0;
+ }
+ ptr = Ustrlen(s);
+ size = ptr + 1;
}
s = string_cat(s, &size, &ptr, US"\r\n", 2);
if (thismessage_size_limit > 0)
{
- sprintf(CS big_buffer, "250-SIZE %d\r\n", thismessage_size_limit);
+ sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
+ thismessage_size_limit);
s = string_cat(s, &size, &ptr, big_buffer, Ustrlen(big_buffer));
}
else
{
- s = string_cat(s, &size, &ptr, US"250-SIZE\r\n", 10);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-SIZE\r\n", 7);
}
/* Exim does not do protocol conversion or data conversion. It is 8-bit
provided as an option. */
if (accept_8bitmime)
- s = string_cat(s, &size, &ptr, US"250-8BITMIME\r\n", 14);
+ {
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-8BITMIME\r\n", 11);
+ }
+
+ /* Advertise DSN support if configured to do so. */
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ {
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-DSN\r\n", 6);
+ dsn_advertised = TRUE;
+ }
/* Advertise ETRN if there's an ACL checking whether a host is
permitted to issue it; a check is made when any host actually tries. */
if (acl_smtp_etrn != NULL)
{
- s = string_cat(s, &size, &ptr, US"250-ETRN\r\n", 10);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-ETRN\r\n", 7);
}
/* Advertise EXPN if there's an ACL checking whether a host is
if (acl_smtp_expn != NULL)
{
- s = string_cat(s, &size, &ptr, US"250-EXPN\r\n", 10);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-EXPN\r\n", 7);
}
/* Exim is quite happy with pipelining, so let the other end know that
it is safe to use it, unless advertising is disabled. */
- if (verify_check_host(&pipelining_advertise_hosts) == OK)
+ if (pipelining_enable &&
+ verify_check_host(&pipelining_advertise_hosts) == OK)
{
- s = string_cat(s, &size, &ptr, US"250-PIPELINING\r\n", 16);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-PIPELINING\r\n", 13);
sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
pipelining_advertised = TRUE;
}
+
/* If any server authentication mechanisms are configured, advertise
them if the current host is in auth_advertise_hosts. The problem with
advertising always is that some clients then require users to
int saveptr;
if (first)
{
- s = string_cat(s, &size, &ptr, US"250-AUTH", 8);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-AUTH", 5);
first = FALSE;
auth_advertised = TRUE;
}
secure connection. */
#ifdef SUPPORT_TLS
- if (tls_active < 0 &&
+ if (tls_in.active < 0 &&
verify_check_host(&tls_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, US"250-STARTTLS\r\n", 14);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-STARTTLS\r\n", 11);
tls_advertised = TRUE;
}
#endif
+ #ifndef DISABLE_PRDR
+ /* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
+ if (prdr_enable)
+ {
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-PRDR\r\n", 7);
+ }
+ #endif
+
/* Finish off the multiline reply with one that is always available. */
- s = string_cat(s, &size, &ptr, US"250 HELP\r\n", 10);
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US" HELP\r\n", 7);
}
/* Terminate the string (for debug), write it, and note that HELO/EHLO
s[ptr] = 0;
#ifdef SUPPORT_TLS
- if (tls_active >= 0) (void)tls_write(s, ptr); else
+ if (tls_in.active >= 0) (void)tls_write(TRUE, s, ptr); else
#endif
- (void)fwrite(s, 1, ptr, smtp_out);
+ {
+ int i = fwrite(s, 1, ptr, smtp_out); i = i; /* compiler quietening */
+ }
DEBUG(D_receive)
{
uschar *cr;
debug_printf("SMTP>> %s", s);
}
helo_seen = TRUE;
+
+ /* Reset the protocol and the state, abandoning any previous message. */
+
+ received_protocol = (esmtp?
+ protocols[pextend +
+ ((sender_host_authenticated != NULL)? pauthed : 0) +
+ ((tls_in.active >= 0)? pcrpted : 0)]
+ :
+ protocols[pnormal + ((tls_in.active >= 0)? pcrpted : 0)])
+ +
+ ((sender_host_address != NULL)? pnlocal : 0);
+
+ smtp_reset(reset_point);
+ toomany = FALSE;
break; /* HELO/EHLO */
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
+ HAD(SCH_MAIL);
smtp_mailcmd_count++; /* Count for limit and ratelimit */
was_rej_mail = TRUE; /* Reset if accepted */
+ env_mail_type_t * mail_args; /* Sanity check & validate args */
if (helo_required && !helo_seen)
{
break;
}
- if (smtp_cmd_argument[0] == 0)
+ if (smtp_cmd_data[0] == 0)
{
done = synprot_error(L_smtp_protocol_error, 501, NULL,
US"MAIL must have an address operand");
{
uschar *name, *value, *end;
unsigned long int size;
+ BOOL arg_error = FALSE;
if (!extract_option(&name, &value)) break;
- /* Handle SIZE= by reading the value. We don't do the check till later,
- in order to be able to log the sender address on failure. */
-
- if (strcmpic(name, US"SIZE") == 0 &&
- ((size = (int)Ustrtoul(value, &end, 10)), *end == 0))
+ for (mail_args = env_mail_type_list;
+ (char *)mail_args < (char *)env_mail_type_list + sizeof(env_mail_type_list);
+ mail_args++
+ )
{
- if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
- size = INT_MAX;
- message_size = (int)size;
+ if (strcmpic(name, mail_args->name) == 0)
+ break;
}
+ if (mail_args->need_value && strcmpic(value, US"") == 0)
+ break;
- /* If this session was initiated with EHLO and accept_8bitmime is set,
- Exim will have indicated that it supports the BODY=8BITMIME option. In
- fact, it does not support this according to the RFCs, in that it does not
- take any special action for forwarding messages containing 8-bit
- characters. That is why accept_8bitmime is not the default setting, but
- some sites want the action that is provided. We recognize both "8BITMIME"
- and "7BIT" as body types, but take no action. */
-
- else if (accept_8bitmime && strcmpic(name, US"BODY") == 0 &&
- (strcmpic(value, US"8BITMIME") == 0 ||
- strcmpic(value, US"7BIT") == 0)) {}
-
- /* Handle the AUTH extension. If the value given is not "<>" and either
- the ACL says "yes" or there is no ACL but the sending host is
- authenticated, we set it up as the authenticated sender. However, if the
- authenticator set a condition to be tested, we ignore AUTH on MAIL unless
- the condition is met. The value of AUTH is an xtext, which means that +,
- = and cntrl chars are coded in hex; however "<>" is unaffected by this
- coding. */
-
- else if (strcmpic(name, US"AUTH") == 0)
+ switch(mail_args->value)
{
- if (Ustrcmp(value, "<>") != 0)
- {
- int rc;
- uschar *ignore_msg;
-
- if (auth_xtextdecode(value, &authenticated_sender) < 0)
+ /* Handle SIZE= by reading the value. We don't do the check till later,
+ in order to be able to log the sender address on failure. */
+ case ENV_MAIL_OPT_SIZE:
+ if (((size = Ustrtoul(value, &end, 10)), *end == 0))
{
- /* Put back terminator overrides for error message */
- name[-1] = ' ';
- value[-1] = '=';
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid data for AUTH");
- goto COMMAND_LOOP;
+ if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
+ size = INT_MAX;
+ message_size = (int)size;
+ }
+ else
+ arg_error = TRUE;
+ break;
+
+ /* If this session was initiated with EHLO and accept_8bitmime is set,
+ Exim will have indicated that it supports the BODY=8BITMIME option. In
+ fact, it does not support this according to the RFCs, in that it does not
+ take any special action for forwarding messages containing 8-bit
+ characters. That is why accept_8bitmime is not the default setting, but
+ some sites want the action that is provided. We recognize both "8BITMIME"
+ and "7BIT" as body types, but take no action. */
+ case ENV_MAIL_OPT_BODY:
+ if (accept_8bitmime) {
+ if (strcmpic(value, US"8BITMIME") == 0) {
+ body_8bitmime = 8;
+ } else if (strcmpic(value, US"7BIT") == 0) {
+ body_8bitmime = 7;
+ } else {
+ body_8bitmime = 0;
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for BODY");
+ goto COMMAND_LOOP;
}
+ DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
+ break;
+ }
+ arg_error = TRUE;
+ break;
- if (acl_smtp_mailauth == NULL)
- {
- ignore_msg = US"client not authenticated";
- rc = (sender_host_authenticated != NULL)? OK : FAIL;
+ /* Handle the two DSN options, but only if configured to do so (which
+ will have caused "DSN" to be given in the EHLO response). The code itself
+ is included only if configured in at build time. */
+
+ case ENV_MAIL_OPT_RET:
+ if (dsn_advertised) {
+ /* Check if RET has already been set */
+ if (dsn_ret > 0) {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"RET can be specified once only");
+ goto COMMAND_LOOP;
}
- else
- {
- ignore_msg = US"rejected by ACL";
- rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
- &user_msg, &log_msg);
+ dsn_ret = (strcmpic(value, US"HDRS") == 0)? dsn_ret_hdrs :
+ (strcmpic(value, US"FULL") == 0)? dsn_ret_full : 0;
+ DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
+ /* Check for invalid invalid value, and exit with error */
+ if (dsn_ret == 0) {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Value for RET is invalid");
+ goto COMMAND_LOOP;
+ }
+ }
+ break;
+ case ENV_MAIL_OPT_ENVID:
+ if (dsn_advertised) {
+ /* Check if the dsn envid has been already set */
+ if (dsn_envid != NULL) {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ENVID can be specified once only");
+ goto COMMAND_LOOP;
}
+ dsn_envid = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
+ }
+ break;
- switch (rc)
+ /* Handle the AUTH extension. If the value given is not "<>" and either
+ the ACL says "yes" or there is no ACL but the sending host is
+ authenticated, we set it up as the authenticated sender. However, if the
+ authenticator set a condition to be tested, we ignore AUTH on MAIL unless
+ the condition is met. The value of AUTH is an xtext, which means that +,
+ = and cntrl chars are coded in hex; however "<>" is unaffected by this
+ coding. */
+ case ENV_MAIL_OPT_AUTH:
+ if (Ustrcmp(value, "<>") != 0)
{
- case OK:
- if (authenticated_by == NULL ||
- authenticated_by->mail_auth_condition == NULL ||
- expand_check_condition(authenticated_by->mail_auth_condition,
- authenticated_by->name, US"authenticator"))
- break; /* Accept the AUTH */
-
- ignore_msg = US"server_mail_auth_condition failed";
- if (authenticated_id != NULL)
- ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
- ignore_msg, authenticated_id);
-
- /* Fall through */
-
- case FAIL:
- authenticated_sender = NULL;
- log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
- value, host_and_ident(TRUE), ignore_msg);
- break;
-
- /* Should only get DEFER or ERROR here. Put back terminator
- overrides for error message */
+ int rc;
+ uschar *ignore_msg;
- default:
- name[-1] = ' ';
- value[-1] = '=';
- (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
- log_msg);
- goto COMMAND_LOOP;
+ if (auth_xtextdecode(value, &authenticated_sender) < 0)
+ {
+ /* Put back terminator overrides for error message */
+ value[-1] = '=';
+ name[-1] = ' ';
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for AUTH");
+ goto COMMAND_LOOP;
+ }
+ if (acl_smtp_mailauth == NULL)
+ {
+ ignore_msg = US"client not authenticated";
+ rc = (sender_host_authenticated != NULL)? OK : FAIL;
+ }
+ else
+ {
+ ignore_msg = US"rejected by ACL";
+ rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
+ &user_msg, &log_msg);
+ }
+
+ switch (rc)
+ {
+ case OK:
+ if (authenticated_by == NULL ||
+ authenticated_by->mail_auth_condition == NULL ||
+ expand_check_condition(authenticated_by->mail_auth_condition,
+ authenticated_by->name, US"authenticator"))
+ break; /* Accept the AUTH */
+
+ ignore_msg = US"server_mail_auth_condition failed";
+ if (authenticated_id != NULL)
+ ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
+ ignore_msg, authenticated_id);
+
+ /* Fall through */
+
+ case FAIL:
+ authenticated_sender = NULL;
+ log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
+ value, host_and_ident(TRUE), ignore_msg);
+ break;
+
+ /* Should only get DEFER or ERROR here. Put back terminator
+ overrides for error message */
+
+ default:
+ value[-1] = '=';
+ name[-1] = ' ';
+ (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
+ log_msg);
+ goto COMMAND_LOOP;
+ }
}
- }
- }
+ break;
- /* Unknown option. Stick back the terminator characters and break
- the loop. An error for a malformed address will occur. */
+#ifndef DISABLE_PRDR
+ case ENV_MAIL_OPT_PRDR:
+ if (prdr_enable)
+ prdr_requested = TRUE;
+ break;
+#endif
- else
- {
- name[-1] = ' ';
- value[-1] = '=';
- break;
+ /* Unknown option. Stick back the terminator characters and break
+ the loop. Do the name-terminator second as extract_option sets
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
+ default:
+ value[-1] = '=';
+ name[-1] = ' ';
+ arg_error = TRUE;
+ break;
}
+ /* Break out of for loop if switch() had bad argument or
+ when start of the email address is reached */
+ if (arg_error) break;
}
/* If we have passed the threshold for rate limiting, apply the current
TRUE flag allows "<>" as a sender address. */
raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_argument, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_argument;
+ rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules) : smtp_cmd_data;
/* rfc821_domains = TRUE; << no longer needed */
raw_sender =
if (raw_sender == NULL)
{
- done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_argument, errmess);
+ done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
break;
}
else
{
smtp_printf("501 %s: sender address must contain a domain\r\n",
- smtp_cmd_argument);
+ smtp_cmd_data);
log_write(L_smtp_syntax_error,
LOG_MAIN|LOG_REJECT,
"unqualified sender rejected: <%s> %s%s",
}
}
- /* Apply an ACL check if one is defined, before responding */
+ /* Apply an ACL check if one is defined, before responding. Afterwards,
+ when pipelining is not advertised, do another sync check in case the ACL
+ delayed and the client started sending in the meantime. */
- rc = (acl_smtp_mail == NULL)? OK :
- acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
+ if (acl_smtp_mail)
+ {
+ rc = acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
+ if (rc == OK && !pipelining_advertised && !check_sync())
+ goto SYNC_FAILURE;
+ }
+ else
+ rc = OK;
if (rc == OK || rc == DISCARD)
{
- smtp_printf("250 OK\r\n");
+ if (!user_msg)
+ smtp_printf("%s%s%s", US"250 OK",
+ #ifndef DISABLE_PRDR
+ prdr_requested ? US", PRDR Requested" : US"",
+ #else
+ US"",
+ #endif
+ US"\r\n");
+ else
+ {
+ #ifndef DISABLE_PRDR
+ if (prdr_requested)
+ user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
+ #endif
+ smtp_user_msg(US"250", user_msg);
+ }
smtp_delay_rcpt = smtp_rlr_base;
recipients_discarded = (rc == DISCARD);
was_rej_mail = FALSE;
}
-
else
{
done = smtp_handle_acl_fail(ACL_WHERE_MAIL, rc, user_msg, log_msg);
break;
- /* The RCPT command requires an address as an operand. All we do
- here is to parse it for syntactic correctness. There may be any number
- of RCPT commands, specifying multiple senders. We build them all into
- a data structure that is in argc/argv format. The start/end values
- given by parse_extract_address are not used, as we keep only the
- extracted address. */
+ /* The RCPT command requires an address as an operand. There may be any
+ number of RCPT commands, specifying multiple recipients. We build them all
+ into a data structure. The start/end values given by parse_extract_address
+ are not used, as we keep only the extracted address. */
case RCPT_CMD:
+ HAD(SCH_RCPT);
rcpt_count++;
- was_rcpt = TRUE;
+ was_rcpt = rcpt_in_progress = TRUE;
/* There must be a sender address; if the sender was rejected and
pipelining was advertised, we assume the client was pipelining, and do not
/* Check for an operand */
- if (smtp_cmd_argument[0] == 0)
+ if (smtp_cmd_data[0] == 0)
{
done = synprot_error(L_smtp_syntax_error, 501, NULL,
US"RCPT must have an address operand");
break;
}
+ /* Set the DSN flags orcpt and dsn_flags from the session*/
+ orcpt = NULL;
+ flags = 0;
+
+ if (esmtp) for(;;)
+ {
+ uschar *name, *value;
+
+ if (!extract_option(&name, &value))
+ break;
+
+ if (dsn_advertised && strcmpic(name, US"ORCPT") == 0)
+ {
+ /* Check whether orcpt has been already set */
+ if (orcpt)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ORCPT can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ orcpt = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN orcpt: %s\n", orcpt);
+ }
+
+ else if (dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
+ {
+ /* Check if the notify flags have been already set */
+ if (flags > 0)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"NOTIFY can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ if (strcmpic(value, US"NEVER") == 0)
+ flags |= rf_notify_never;
+ else
+ {
+ uschar *p = value;
+ while (*p != 0)
+ {
+ uschar *pp = p;
+ while (*pp != 0 && *pp != ',') pp++;
+ if (*pp == ',') *pp++ = 0;
+ if (strcmpic(p, US"SUCCESS") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
+ flags |= rf_notify_success;
+ }
+ else if (strcmpic(p, US"FAILURE") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
+ flags |= rf_notify_failure;
+ }
+ else if (strcmpic(p, US"DELAY") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
+ flags |= rf_notify_delay;
+ }
+ else
+ {
+ /* Catch any strange values */
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Invalid value for NOTIFY parameter");
+ goto COMMAND_LOOP;
+ }
+ p = pp;
+ }
+ DEBUG(D_receive) debug_printf("DSN Flags: %x\n", flags);
+ }
+ }
+
+ /* Unknown option. Stick back the terminator characters and break
+ the loop. An error for a malformed address will occur. */
+
+ else
+ {
+ DEBUG(D_receive) debug_printf("Invalid RCPT option: %s : %s\n", name, value);
+ name[-1] = ' ';
+ value[-1] = '=';
+ break;
+ }
+ }
+
/* Apply SMTP rewriting then extract the working address. Don't allow "<>"
as a recipient address */
recipient = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_argument, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_argument;
+ rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules) : smtp_cmd_data;
/* rfc821_domains = TRUE; << no longer needed */
recipient = parse_extract_address(recipient, &errmess, &start, &end,
if (recipient == NULL)
{
- done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_argument, errmess);
+ done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
rcpt_fail_count++;
break;
}
{
rcpt_fail_count++;
smtp_printf("501 %s: recipient address must contain a domain\r\n",
- smtp_cmd_argument);
+ smtp_cmd_data);
log_write(L_smtp_syntax_error,
LOG_MAIN|LOG_REJECT, "unqualified recipient rejected: "
"<%s> %s%s", recipient, host_and_ident(TRUE),
}
/* If the MAIL ACL discarded all the recipients, we bypass ACL checking
- for them. Otherwise, check the access control list for this recipient. */
+ for them. Otherwise, check the access control list for this recipient. As
+ there may be a delay in this, re-check for a synchronization error
+ afterwards, unless pipelining was advertised. */
- rc = recipients_discarded? DISCARD :
- acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg, &log_msg);
+ if (recipients_discarded) rc = DISCARD; else
+ {
+ rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
+ &log_msg);
+ if (rc == OK && !pipelining_advertised && !check_sync())
+ goto SYNC_FAILURE;
+ }
/* The ACL was happy */
if (rc == OK)
{
- smtp_printf("250 Accepted\r\n");
+ if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
+ else smtp_user_msg(US"250", user_msg);
receive_add_recipient(recipient, -1);
+
+ /* Set the dsn flags in the recipients_list */
+ if (orcpt != NULL)
+ recipients_list[recipients_count-1].orcpt = orcpt;
+ else
+ recipients_list[recipients_count-1].orcpt = NULL;
+
+ if (flags != 0)
+ recipients_list[recipients_count-1].dsn_flags = flags;
+ else
+ recipients_list[recipients_count-1].dsn_flags = 0;
+ DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n", recipients_list[recipients_count-1].orcpt, recipients_list[recipients_count-1].dsn_flags);
}
/* The recipient was discarded */
else if (rc == DISCARD)
{
- smtp_printf("250 Accepted\r\n");
+ if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
+ else smtp_user_msg(US"250", user_msg);
rcpt_fail_count++;
discarded = TRUE;
log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> rejected RCPT %s: "
DATA command.
The example in the pipelining RFC 2920 uses 554, but I use 503 here
- because it is the same whether pipelining is in use or not. */
+ because it is the same whether pipelining is in use or not.
+
+ If all the RCPT commands that precede DATA provoked the same error message
+ (often indicating some kind of system error), it is helpful to include it
+ with the DATA rejection (an idea suggested by Tony Finch). */
case DATA_CMD:
+ HAD(SCH_DATA);
if (!discarded && recipients_count <= 0)
{
+ if (rcpt_smtp_response_same && rcpt_smtp_response != NULL)
+ {
+ uschar *code = US"503";
+ int len = Ustrlen(rcpt_smtp_response);
+ smtp_respond(code, 3, FALSE, US"All RCPT commands were rejected with "
+ "this error:");
+ /* Responses from smtp_printf() will have \r\n on the end */
+ if (len > 2 && rcpt_smtp_response[len-2] == '\r')
+ rcpt_smtp_response[len-2] = 0;
+ smtp_respond(code, 3, FALSE, rcpt_smtp_response);
+ }
if (pipelining_advertised && last_was_rcpt)
- smtp_printf("503 valid RCPT command must precede DATA\r\n");
+ smtp_printf("503 Valid RCPT command must precede DATA\r\n");
else
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"valid RCPT command must precede DATA");
break;
}
- if (acl_smtp_predata == NULL) rc = OK; else
+ /* If there is an ACL, re-check the synchronization afterwards, since the
+ ACL may have delayed. To handle cutthrough delivery enforce a dummy call
+ to get the DATA command sent. */
+
+ if (acl_smtp_predata == NULL && cutthrough.fd < 0) rc = OK; else
{
+ uschar * acl= acl_smtp_predata ? acl_smtp_predata : US"accept";
enable_dollar_recipients = TRUE;
- rc = acl_check(ACL_WHERE_PREDATA, NULL, acl_smtp_predata, &user_msg,
+ rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
&log_msg);
enable_dollar_recipients = FALSE;
+ if (rc == OK && !check_sync()) goto SYNC_FAILURE;
}
if (rc == OK)
{
- smtp_printf("354 Enter message, ending with \".\" on a line by itself\r\n");
+ uschar * code;
+ code = US"354";
+ if (user_msg == NULL)
+ smtp_printf("%s Enter message, ending with \".\" on a line by itself\r\n", code);
+ else smtp_user_msg(code, user_msg);
done = 3;
message_ended = END_NOTENDED; /* Indicate in middle of data */
}
else
done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
-
break;
case VRFY_CMD:
+ HAD(SCH_VRFY);
rc = acl_check(ACL_WHERE_VRFY, NULL, acl_smtp_vrfy, &user_msg, &log_msg);
if (rc != OK)
done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
uschar *s = NULL;
/* rfc821_domains = TRUE; << no longer needed */
- address = parse_extract_address(smtp_cmd_argument, &errmess, &start, &end,
+ address = parse_extract_address(smtp_cmd_data, &errmess, &start, &end,
&recipient_domain, FALSE);
/* rfc821_domains = FALSE; << no longer needed */
case EXPN_CMD:
+ HAD(SCH_EXPN);
rc = acl_check(ACL_WHERE_EXPN, NULL, acl_smtp_expn, &user_msg, &log_msg);
if (rc != OK)
done = smtp_handle_acl_fail(ACL_WHERE_EXPN, rc, user_msg, log_msg);
{
BOOL save_log_testing_mode = log_testing_mode;
address_test_mode = log_testing_mode = TRUE;
- (void) verify_address(deliver_make_addr(smtp_cmd_argument, FALSE),
+ (void) verify_address(deliver_make_addr(smtp_cmd_data, FALSE),
smtp_out, vopt_is_recipient | vopt_qualify | vopt_expn, -1, -1, -1,
NULL, NULL, NULL);
address_test_mode = FALSE;
#ifdef SUPPORT_TLS
case STARTTLS_CMD:
+ HAD(SCH_STARTTLS);
if (!tls_advertised)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
toomany = FALSE;
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE;
+ /* There's an attack where more data is read in past the STARTTLS command
+ before TLS is negotiated, then assumed to be part of the secure session
+ when used afterwards; we use segregated input buffers, so are not
+ vulnerable, but we want to note when it happens and, for sheer paranoia,
+ ensure that the buffer is "wiped".
+ Pipelining sync checks will normally have protected us too, unless disabled
+ by configuration. */
+
+ if (receive_smtp_buffered())
+ {
+ DEBUG(D_any)
+ debug_printf("Non-empty input buffer after STARTTLS; naive attack?");
+ if (tls_in.active < 0)
+ smtp_inend = smtp_inptr = smtp_inbuffer;
+ /* and if TLS is already active, tls_server_start() should fail */
+ }
+
+ /* There is nothing we value in the input buffer and if TLS is succesfully
+ negotiated, we won't use this buffer again; if TLS fails, we'll just read
+ fresh content into it. The buffer contains arbitrary content from an
+ untrusted remote source; eg: NOOP <shellcode>\r\nSTARTTLS\r\n
+ It seems safest to just wipe away the content rather than leave it as a
+ target to jump to. */
+
+ memset(smtp_inbuffer, 0, in_buffer_size);
+
/* Attempt to start up a TLS session, and if successful, discard all
knowledge that was obtained previously. At least, that's what the RFC says,
and that's what happens by default. However, in order to work round YAEB,
}
/* Hard failure. Reject everything except QUIT or closed connection. One
- cause for failure is a nested STARTTLS, in which case tls_active remains
+ cause for failure is a nested STARTTLS, in which case tls_in.active remains
set, but we must still reject all incoming commands. */
DEBUG(D_tls) debug_printf("TLS failed to start\n");
case EOF_CMD:
log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
smtp_get_connection_info());
+ smtp_notquit_exit(US"tls-failed", NULL, NULL);
done = 2;
break;
+ /* It is perhaps arguable as to which exit ACL should be called here,
+ but as it is probably a situation that almost never arises, it
+ probably doesn't matter. We choose to call the real QUIT ACL, which in
+ some sense is perhaps "right". */
+
case QUIT_CMD:
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+ user_msg = NULL;
+ if (acl_smtp_quit != NULL)
+ {
+ rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
+ &log_msg);
+ if (rc == ERROR)
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ log_msg);
+ }
+ if (user_msg == NULL)
+ smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+ else
+ smtp_respond(US"221", 3, TRUE, user_msg);
log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
smtp_get_connection_info());
done = 2;
break;
}
}
- tls_close(TRUE);
+ tls_close(TRUE, TRUE);
break;
#endif
message. */
case QUIT_CMD:
+ HAD(SCH_QUIT);
incomplete_transaction_log(US"QUIT");
-
if (acl_smtp_quit != NULL)
{
- rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit,&user_msg,&log_msg);
+ rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg, &log_msg);
if (rc == ERROR)
log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
log_msg);
}
- else user_msg = NULL;
-
if (user_msg == NULL)
smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
else
- smtp_printf("221 %s\r\n", user_msg);
+ smtp_respond(US"221", 3, TRUE, user_msg);
#ifdef SUPPORT_TLS
- tls_close(TRUE);
+ tls_close(TRUE, TRUE);
#endif
done = 2;
case RSET_CMD:
+ HAD(SCH_RSET);
incomplete_transaction_log(US"RSET");
smtp_reset(reset_point);
toomany = FALSE;
case NOOP_CMD:
+ HAD(SCH_NOOP);
smtp_printf("250 OK\r\n");
break;
- /* Show ETRN/EXPN/VRFY if there's
- an ACL for checking hosts; if actually used, a check will be done for
- permitted hosts. */
+ /* Show ETRN/EXPN/VRFY if there's an ACL for checking hosts; if actually
+ used, a check will be done for permitted hosts. Show STARTTLS only if not
+ already in a TLS session and if it would be advertised in the EHLO
+ response. */
case HELP_CMD:
+ HAD(SCH_HELP);
smtp_printf("214-Commands supported:\r\n");
{
uschar buffer[256];
buffer[0] = 0;
Ustrcat(buffer, " AUTH");
#ifdef SUPPORT_TLS
- Ustrcat(buffer, " STARTTLS");
+ if (tls_in.active < 0 &&
+ verify_check_host(&tls_advertise_hosts) != FAIL)
+ Ustrcat(buffer, " STARTTLS");
#endif
Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA");
Ustrcat(buffer, " NOOP QUIT RSET HELP");
case EOF_CMD:
incomplete_transaction_log(US"connection lost");
- smtp_printf("421 %s lost input connection\r\n", smtp_active_hostname);
+ smtp_notquit_exit(US"connection-lost", US"421",
+ US"%s lost input connection", smtp_active_hostname);
/* Don't log by default unless in the middle of a message, as some mailers
just drop the call rather than sending QUIT, and it clutters up the logs.
case ETRN_CMD:
+ HAD(SCH_ETRN);
if (sender_address != NULL)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
/* Compute the serialization key for this command. */
- etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_cmd_argument);
+ etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_cmd_data);
/* If a command has been specified for running as a result of ETRN, we
permit any argument to ETRN. If not, only the # standard form is permitted,
uschar *error;
BOOL rc;
etrn_command = smtp_etrn_command;
- deliver_domain = smtp_cmd_argument;
+ deliver_domain = smtp_cmd_data;
rc = transport_set_up_command(&argv, smtp_etrn_command, TRUE, 0, NULL,
US"ETRN processing", &error);
deliver_domain = NULL;
else
{
- if (*smtp_cmd_argument++ != '#')
+ if (*smtp_cmd_data++ != '#')
{
done = synprot_error(L_smtp_syntax_error, 501, NULL,
US"argument must begin with #");
break;
}
etrn_command = US"exim -R";
- argv = child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
- smtp_cmd_argument);
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
+ smtp_cmd_data);
}
/* If we are host-testing, don't actually do anything. */
debug_printf("ETRN command is: %s\n", etrn_command);
debug_printf("ETRN command execution skipped\n");
}
- smtp_printf("250 OK\r\n");
+ if (user_msg == NULL) smtp_printf("250 OK\r\n");
+ else smtp_user_msg(US"250", user_msg);
break;
}
if (smtp_etrn_serialize && !enq_start(etrn_serialize_key))
{
- smtp_printf("458 Already processing %s\r\n", smtp_cmd_argument);
+ smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
break;
}
smtp_printf("458 Unable to fork process\r\n");
if (smtp_etrn_serialize) enq_end(etrn_serialize_key);
}
- else smtp_printf("250 OK\r\n");
+ else
+ {
+ if (user_msg == NULL) smtp_printf("250 OK\r\n");
+ else smtp_user_msg(US"250", user_msg);
+ }
signal(SIGCHLD, oldsignal);
break;
case BADSYN_CMD:
+ SYNC_FAILURE:
if (smtp_inend >= smtp_inbuffer + in_buffer_size)
smtp_inend = smtp_inbuffer + in_buffer_size - 1;
c = smtp_inend - smtp_inptr;
pipelining_advertised? "" : " not",
smtp_cmd_buffer, host_and_ident(TRUE),
string_printing(smtp_inptr));
- smtp_printf("554 SMTP synchronization error\r\n");
+ smtp_notquit_exit(US"synchronization-error", US"554",
+ US"SMTP synchronization error");
done = 1; /* Pretend eof - drops connection */
break;
case TOO_MANY_NONMAIL_CMD:
+ s = smtp_cmd_buffer;
+ while (*s != 0 && !isspace(*s)) s++;
incomplete_transaction_log(US"too many non-mail commands");
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"nonmail commands (last was \"%.*s\")", host_and_ident(FALSE),
- smtp_cmd_argument - smtp_cmd_buffer, smtp_cmd_buffer);
- smtp_printf("554 Too many nonmail commands\r\n");
+ (int)(s - smtp_cmd_buffer), smtp_cmd_buffer);
+ smtp_notquit_exit(US"bad-commands", US"554", US"Too many nonmail commands");
done = 1; /* Pretend eof - drops connection */
break;
+ #ifdef EXPERIMENTAL_PROXY
+ case PROXY_FAIL_IGNORE_CMD:
+ smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
+ break;
+ #endif
default:
if (unknown_command_count++ >= smtp_max_unknown_commands)
string_printing(smtp_cmd_buffer), host_and_ident(TRUE),
US"unrecognized command");
incomplete_transaction_log(US"unrecognized command");
- smtp_printf("500 Too many unrecognized commands\r\n");
+ smtp_notquit_exit(US"bad-commands", US"500",
+ US"Too many unrecognized commands");
done = 2;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
return done - 2; /* Convert yield values */
}
+/* vi: aw ai sw=2
+*/
/* End of smtp_in.c */
git://git.exim.org / users / jgh / exim.git / blobdiff