we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
-#define smtp_cmd_buffer_size 16384
+#define SMTP_CMD_BUFFER_SIZE 16384
/* Size of buffer for reading SMTP incoming packets */
-#define in_buffer_size 8192
+#define IN_BUFFER_SIZE 8192
/* Structure for SMTP command list */
/* forward declarations */
int bdat_ungetc(int ch);
-static int smtp_read_command(BOOL check_sync);
+static int smtp_read_command(BOOL check_sync, unsigned buffer_lim);
static int synprot_error(int type, int code, uschar *data, uschar *errmess);
static void smtp_quit_handler(uschar **, uschar **);
static void smtp_rset_handler(void);
rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
if (rc <= 0) return TRUE; /* Not ready to read */
-rc = smtp_getc();
+rc = smtp_getc(GETC_BUFFER_UNLIMITED);
if (rc < 0) return TRUE; /* End of file or error */
smtp_ungetc(rc);
handler is set appropriately by the calling function. This function is not used
after a connection has negotiated itself into an TLS/SSL state.
-Arguments: none
+Arguments: lim Maximum amount to read/buffer
Returns: the next character or EOF
*/
int
-smtp_getc(void)
+smtp_getc(unsigned lim)
{
if (smtp_inptr >= smtp_inend)
{
if (!smtp_out) return EOF;
fflush(smtp_out);
if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
- rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size);
+
+ /* Limit amount read, so non-message data is not fed to DKIM */
+
+ rc = read(fileno(smtp_in), smtp_inbuffer, MIN(IN_BUFFER_SIZE, lim));
save_errno = errno;
alarm(0);
if (rc <= 0)
Placed here due to the correlation with the above smtp_getc(), which it wraps,
and also by the need to do smtp command/response handling.
-Arguments: none
+Arguments: lim (ignored)
Returns: the next character or ERR, EOD or EOF
*/
int
-bdat_getc(void)
+bdat_getc(unsigned lim)
{
uschar * user_msg = NULL;
uschar * log_msg;
for(;;)
{
- if (chunking_data_left-- > 0)
- return lwr_receive_getc();
+ if (chunking_data_left > 0)
+ return lwr_receive_getc(chunking_data_left--);
receive_getc = lwr_receive_getc;
receive_ungetc = lwr_receive_ungetc;
+#ifndef DISABLE_DKIM
+ dkim_collect_input = FALSE;
+#endif
/* Unless PIPELINING was offered, there should be no next command
until after we ack that chunk */
return EOD;
}
- chunking_state = CHUNKING_OFFERED;
smtp_printf("250 %u byte chunk received\r\n", chunking_datasize);
+ chunking_state = CHUNKING_OFFERED;
+ DEBUG(D_receive) debug_printf("chunking state %d\n", (int)chunking_state);
/* Expect another BDAT cmd from input. RFC 3030 says nothing about
QUIT, RSET or NOOP but handling them seems obvious */
next_cmd:
- switch(smtp_read_command(TRUE))
+ switch(smtp_read_command(TRUE, 1))
{
default:
(void) synprot_error(L_smtp_protocol_error, 503, NULL,
US"only BDAT permissible after non-LAST BDAT");
repeat_until_rset:
- switch(smtp_read_command(TRUE))
+ switch(smtp_read_command(TRUE, 1))
{
case QUIT_CMD: smtp_quit_handler(&user_msg, &log_msg); /*FALLTHROUGH */
case EOF_CMD: return EOF;
chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
? CHUNKING_LAST : CHUNKING_ACTIVE;
chunking_data_left = chunking_datasize;
+ DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
+ (int)chunking_state, chunking_data_left);
if (chunking_datasize == 0)
if (chunking_state == CHUNKING_LAST)
receive_getc = bdat_getc;
receive_ungetc = bdat_ungetc;
+#ifndef DISABLE_DKIM
+ dkim_collect_input = TRUE;
+#endif
break; /* to top of main loop */
}
}
static void
bdat_flush_data(void)
{
-while (chunking_data_left-- > 0)
- if (lwr_receive_getc() < 0)
+while (chunking_data_left > 0)
+ if (lwr_receive_getc(chunking_data_left--) < 0)
break;
receive_getc = lwr_receive_getc;
receive_ungetc = lwr_receive_ungetc;
if (chunking_state != CHUNKING_LAST)
+ {
chunking_state = CHUNKING_OFFERED;
+ DEBUG(D_receive) debug_printf("chunking state %d\n", (int)chunking_state);
+ }
}
return when it runs.
Arguments:
- check_sync if TRUE, check synchronization rules if global option is TRUE
+ check_sync if TRUE, check synchronization rules if global option is TRUE
+ buffer_lim maximum to buffer in lower layer
Returns: a code identifying the command (enumerated above)
*/
static int
-smtp_read_command(BOOL check_sync)
+smtp_read_command(BOOL check_sync, unsigned buffer_lim)
{
int c;
int ptr = 0;
os_non_restarting_signal(SIGALRM, command_timeout_handler);
-while ((c = (receive_getc)()) != '\n' && c != EOF)
+while ((c = (receive_getc)(buffer_lim)) != '\n' && c != EOF)
{
- if (ptr >= smtp_cmd_buffer_size)
+ if (ptr >= SMTP_CMD_BUFFER_SIZE)
{
os_non_restarting_signal(SIGALRM, sigalrm_handler);
return OTHER_CMD;
receive_swallow_smtp();
smtp_printf("421 %s\r\n", message);
-for (;;) switch(smtp_read_command(FALSE))
+for (;;) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
case EOF_CMD:
return;
uschar *recipient = NULL;
int start, end, sender_domain, recipient_domain;
- switch(smtp_read_command(FALSE))
+ switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
/* The HELO/EHLO commands set sender_address_helo if they have
valid data; otherwise they are ignored, except that they do
/* Allow for trailing 0 in the command and data buffers. */
-if (!(smtp_cmd_buffer = US malloc(2*smtp_cmd_buffer_size + 2)))
+if (!(smtp_cmd_buffer = US malloc(2*SMTP_CMD_BUFFER_SIZE + 2)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"malloc() failed for SMTP command buffer");
smtp_cmd_buffer[0] = 0;
-smtp_data_buffer = smtp_cmd_buffer + smtp_cmd_buffer_size + 1;
+smtp_data_buffer = smtp_cmd_buffer + SMTP_CMD_BUFFER_SIZE + 1;
/* For batched input, the protocol setting can be overridden from the
command line by a trusted caller. */
/* Set up the buffer for inputting using direct read() calls, and arrange to
call the local functions instead of the standard C ones. */
-if (!(smtp_inbuffer = (uschar *)malloc(in_buffer_size)))
+if (!(smtp_inbuffer = (uschar *)malloc(IN_BUFFER_SIZE)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP input buffer");
receive_getc = smtp_getc;
US &off, sizeof(off));
#endif
- switch(smtp_read_command(TRUE))
+ switch(smtp_read_command(TRUE, GETC_BUFFER_UNLIMITED))
{
/* The AUTH command is not permitted to occur inside a transaction, and may
occur successfully only once per connection. Actually, that isn't quite
chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
? CHUNKING_LAST : CHUNKING_ACTIVE;
chunking_data_left = chunking_datasize;
+ DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
+ (int)chunking_state, chunking_data_left);
lwr_receive_getc = receive_getc;
lwr_receive_ungetc = receive_ungetc;
receive_getc = bdat_getc;
receive_ungetc = bdat_ungetc;
- DEBUG(D_any)
- debug_printf("chunking state %d\n", (int)chunking_state);
goto DATA_BDAT;
}
It seems safest to just wipe away the content rather than leave it as a
target to jump to. */
- memset(smtp_inbuffer, 0, in_buffer_size);
+ memset(smtp_inbuffer, 0, IN_BUFFER_SIZE);
/* Attempt to start up a TLS session, and if successful, discard all
knowledge that was obtained previously. At least, that's what the RFC says,
set, but we must still reject all incoming commands. */
DEBUG(D_tls) debug_printf("TLS failed to start\n");
- while (done <= 0) switch(smtp_read_command(FALSE))
+ while (done <= 0) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
case EOF_CMD:
log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
case BADSYN_CMD:
SYNC_FAILURE:
- if (smtp_inend >= smtp_inbuffer + in_buffer_size)
- smtp_inend = smtp_inbuffer + in_buffer_size - 1;
+ if (smtp_inend >= smtp_inbuffer + IN_BUFFER_SIZE)
+ smtp_inend = smtp_inbuffer + IN_BUFFER_SIZE - 1;
c = smtp_inend - smtp_inptr;
if (c > 150) c = 150;
smtp_inptr[c] = 0;