-$Cambridge: exim/test/README,v 1.8 2007/02/20 15:58:02 ph10 Exp $
-
EXPORTABLE EXIM TEST SUITE
--------------------------
tracks the two users independently. Using the same user would result
in false positives on some tests.
+ Further, some tests invoke sudo in an environment where there might not be
+ a TTY, so tickets should be global, not per-TTY. Taking this all together
+ and assuming a user of "exim-build", you might have this in sudoers:
+
+ Defaults:exim-build timestamp_timeout=480,!tty_tickets
+
(3) The login under which you run the tests must be in the exim group so that
it has access to logs, spool files, etc. The login should not be one of the
names "userx", "usery", "userz", or a few other simple ones such as "abcd"
gecos field is empty but there may be anomalies.
(4) The directory into which you unpack the test suite must be accessible by
- the Exim user, so that code running as exim can access the files therein. A
+ the Exim user, so that code running as exim can access the files therein.
+ This includes search-access on all path elements leading to it. A
world-readable directory is fine. However, there may be problems if the
path name of the directory is excessively long. This is because it
sometimes appears in log lines or debug output, and if it is truncated, it
(5) Exim must be built with its user and group specified at build time, and
with certain minimum facilities, namely:
- Routers: accept, dnslookup, manualroute, redirect
- Transports: appendfile, autoreply, pipe, smtp
- Lookups: lsearch
+ Routers: accept, dnslookup, manualroute, redirect
+ Transports: appendfile, autoreply, pipe, smtp
+ Lookups: lsearch
+ Authenticators: plaintext
Most Exim binaries will have these included.
interface; when one is not found, some tests are skipped (with a warning
message).
+(9) Exim must be built with TRUSTED_CONFIG_LIST support, so that the test
+ configs can be placed into it. A suitable file location is .../exim/test/trusted_configs
+ DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it
+ must contain the directory of the test-suite. WHITELIST_D_MACROS should contain:
+
+ DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:LS:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:RT:S:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STD:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF:X:Y
+
+(10) Exim must *not* be built with USE_READLINE, as the test-suite's automation
+ assumes the simpler I/O model.
+ Exim must *not* be built with HEADERS_CHARSET set to UTF-8.
+
+
OPTIONAL EXTRAS
---------------
(2) cd into the exim-testsuite-x.xx directory.
-(3) Run "./configure" and then "make". This builds a few auxiliary programs
- that are written in C.
+(3) Run "autoconf" then "./configure" and then "make". This builds a few
+ auxiliary programs that are written in C.
+
+(4) echo $PWD/test-config >> your_TRUSTED_CONFIG_LIST_filename
+ Typically that is .../exim/test/trusted_configs
-(4) Run "./runtest" (a Perl script) as described below.
+(5) Run "./runtest" (a Perl script) as described below.
-(5) If you want to see what tests are available, run "./listtests".
+(6) If you want to see what tests are available, run "./listtests".
BREAKING OUT OF THE TEST SCRIPT
There are some options for the ./runtest script itself:
+ -CONTINUE This will allow the script to move past some failing tests. It will
+ write a simple failure line with the test number in a temporary
+ logfile test/failed-summary.log. Unexpected exit codes will still
+ stall the test execution and require interaction.
+
-DEBUG This option is for debugging the test script. It causes some
tracing information to be output.
1 difference found.
"test-stdout-munged" contains 16 lines; "stdout/1300" contains 18 lines.
- Continue, Update & retry, Quit? [Q]
+ Continue, Retry, Update & retry, Quit? [Q]
This example was generated by running the test with a version of Exim
that had a bug in the exim_dbmbuild utility (the bug was fixed at release
The reply to the prompt must either be empty, in which case it takes the
default that is given in brackets (in this case Q), or a single letter, in
-upper or lower case (in this case, one of C, U, or Q). If you type anything
+upper or lower case (in this case, one of C, R, U, or Q). If you type anything
else, the prompt is repeated.
"Continue" carries on as if the files had matched; that is, it ignores the
"Update & retry" copies the new file to the saved file, and reruns the test
after doing any further comparisons that may be necessary.
+"Retry" does the same apart from the file copy.
+
Other circumstances give rise to other prompts. If a test generates output for
which there is no saved data, the prompt (after a message stating which file is
unexpectely not empty) is:
. Test 0142 tests open file descriptors; on some hosts the output may vary.
+. Some tests may fail, for example 0022, because it says it uses cached data
+ when the expected output thinks it should not be in cache. Item #5 in the
+ Requirements section has:
+ "Exim must be built with its user and group specified at build time"
+ This means that you cannot use the "ref:username" in your Local/Makefile
+ when building the exim binary, in any of the following fields:
+ EXIM_USER EXIM_GROUP CONFIGURE_OWNER CONFIGURE_GROUP
+
+. If the runtest script warns that the hostname is not a Fully Qualified
+ Domain Name (FQDN), expect that some tests will fail, for example 0036,
+ with an extra log line saying the hostname doesn't resolve. You must use a
+ FQDN for the hostname for proper test functionality.
+
+. If you change your hostname to a FQDN, you must delete the test/dnszones
+ subdirectory. When you next run the runtest script, it will rebuild the
+ content to use the new hostname.
+
+. If your hostname has an uppercase characters in it, expect that some tests
+ will fail, for example, 0036, because some log lines will have the hostname
+ in all lowercase. The regex which extracts the hostname from the log lines
+ will not match the lowercased version.
+
+. Some tests may fail, for example 0015, with a cryptic error message:
+ Server return code 99
+ Due to security concerns, some specific files MUST have the group write bit
+ off. For the purposes of the test suite, some test/aux-fixed/* files MUST
+ have the group write bit off, so it's easier to just remove the group write
+ bit for all of them. If your umask is set to 002, the group write bit will
+ be on by default and you'll see this problem, so make sure your umask is
+ 022 and re-checkout the test/ subdirectory.
+
+. Some tests will fail if the username and group name are different. It does
+ not have to be the primary group, a secondary group is sufficient.
+
OTHER SCRIPTS AND PROGRAMS
--------------------------
"write" command (see below) that creates the input file.
- dumpdb <dbname>
+ dump <dbname>
This command runs the exim_dumpdb utility on the testing spool directory, using
the database name given, for example: "dumpdb retry".
to the screen.
+ munge <name>
+
+This command requests custom munging of the test outputs. The munge names
+used are coded in the runtest script (look for 'name of munge').
+
+
need_ipv4
This command must be at the head of a script. If no IPv4 interface has been
It is controlled by a script read from its standard input, details of which are
given below. There are two options. One is -t, which must be followed directly
by a number, to specify the command timeout in seconds (e.g. -t5). The default
-timeout is 1 second. The other option is -tls-on-connect, which causes the
+timeout is 5 seconds. The other option is -tls-on-connect, which causes the
client to try to start up a TLS session as soon as it has connected, without
using the STARTTLS command. The client program connects to the given IP address
and port, using the specified interface, if one is given.
When OpenSSL is available on the host, an alternative version of the client
program is compiled, one that supports TLS using OpenSSL. The additional
-arguments specify a certificate and key file when required. There is one
-additional option, -tls-on-connect, that causes the client to initiate TLS
-negotiation immediately on connection.
+arguments specify a certificate and key file when required for the connection.
+There are two additional options: -tls-on-connect, that causes the client to
+initiate TLS negociation immediately on connection; -ocsp that causes the TLS
+negotiation to include a certificate-status request. The latter takes a
+filename argument, the CA info for verifying the stapled response.
client-gnutls [<options>] <ip address> <port> [<outgoing interface>] \
-d causes the server to output debugging information
- -t sets a timeout in seconds (default 5) for when the server is
+ -t <sec> sets a timeout (default 5) for when the server is
awaiting an incoming connection
-noipv4 causes the server not to set up an IPv4 socket
-noipv6 causes the server not to set up an IPv6 socket
+ -i <sec> sets an initial pause, to delay before creating the listen sockets
+
By default, in an IPv6 environment, both kinds of socket are set up. However,
the test script knows which interfaces actually exist on the host, and it adds
-noipv4 or -noipv6 to the server command as required. An error occurs if both
git://git.exim.org / users / jgh / exim.git / blobdiff