.set I " "
.macro copyyear
-2014
+2015
.endmacro
. /////////////////////////////////////////////////////////////////////////////
output a Distinguished Name string which is
not quite
parseable by Exim as a comma-separated tagged list
-(the exceptions being elements containin commas).
+(the exceptions being elements containing commas).
RDN elements of a single type may be selected by
a modifier of the type label; if so the expansion
result is a list (newline-separated by default).
you need to add &%-shared%& to the gcc command. Also, in the Exim build-time
configuration, you must add &%-export-dynamic%& to EXTRALIBS.
+
+.vitem "&*${env{*&<&'key'&>&*}{*&<&'string1'&>&*}{*&<&'string2'&>&*}}*&"
+.cindex "expansion" "extracting value from environment"
+.cindex "environment" "value from"
+The key is first expanded separately, and leading and trailing white space
+removed.
+This is then searched for as a name in the environment.
+If a variable is found then its value is placed in &$value$&
+and <&'string1'&> is expanded, otherwise <&'string2'&> is expanded.
+
+Instead of {<&'string2'&>} the word &"fail"& (not in curly brackets) can
+appear, for example:
+.code
+${env{USER}{$value} fail }
+.endd
+This forces an expansion failure (see section &<<SECTforexpfai>>&);
+{<&'string1'&>} must be present for &"fail"& to be recognized.
+
+If {<&'string2'&>} is omitted an empty string is substituted on
+search failure.
+If {<&'string1'&>} is omitted the search result is substituted on
+search success.
+
+
.vitem "&*${extract{*&<&'key'&>&*}{*&<&'string1'&>&*}{*&<&'string2'&>&*}&&&
{*&<&'string3'&>&*}}*&"
.cindex "expansion" "extracting substrings by key"
.new
.vitem &$exim_version$&
-.vindex "&$exim_uid$&"
+.vindex "&$exim_version$&"
This variable contains the version string of the Exim build.
The first character is a major version number, currently 4.
Then after a dot, the next group of digits is a minor version number.
.vindex "&$lookup_dnssec_authenticated$&"
This variable is set after a DNS lookup done by
a dnsdb lookup expansion, dnslookup router or smtp transport.
+.cindex "DNS" "DNSSEC"
It will be empty if &(DNSSEC)& was not requested,
&"no"& if the result was not labelled as authenticated data
and &"yes"& if it was.
the argument of a HELO or EHLO command. This is omitted if it is identical to
the verified host name or to the host's IP address in square brackets.
+.new
+.vitem &$sender_helo_dnssec$&
+.vindex "&$sender_helo_dnssec$&"
+This boolean variable is true if a successful HELO verification was
+.cindex "DNS" "DNSSEC"
+done using DNS information the resolver library stated was authenticatied data.
+.wen
+
.vitem &$sender_helo_name$&
.vindex "&$sender_helo_name$&"
When a message is received from a remote host that has issued a HELO or EHLO
If an attempt to populate &$sender_host_name$& has been made
(by reference, &%hosts_lookup%& or
otherwise) then this boolean will have been set true if, and only if, the
-resolver library states that the reverse DNS was authenticated data. At all
+resolver library states that both
+the reverse and forward DNS were authenticated data. At all
other times, this variable is false.
+.cindex "DNS" "DNSSEC"
It is likely that you will need to coerce DNSSEC support on in the resolver
library, by setting:
.code
Exim does not perform DNSSEC validation itself, instead leaving that to a
validating resolver (eg, unbound, or bind with suitable configuration).
-Exim does not (currently) check to see if the forward DNS was also secured
-with DNSSEC, only the reverse DNS.
-
If you have changed &%host_lookup_order%& so that &`bydns`& is not the first
mechanism in the list, then this variable will be false.
matches the host name that Exim obtains by doing a reverse lookup of the
calling host address, or
.next
-when looked up using &[gethostbyname()]& (or &[getipnodebyname()]& when
-available) yields the calling host address.
+when looked up in DNS yields the calling host address.
.endlist
However, the EHLO or HELO command is not rejected if any of the checks
fail. Processing continues, but the result of the check is remembered, and can
be detected later in an ACL by the &`verify = helo`& condition.
+If DNS was used for successful verification, the variable
+.cindex "DNS" "DNSSEC"
+&$helo_verify_dnssec$& records the DNSSEC status of the lookups.
+
.option helo_verify_hosts main "host list&!!" unset
.cindex "HELO verifying" "mandatory"
.cindex "EHLO" "verifying, mandatory"
This option sets the path which is used to determine the names of Exim's log
files, or indicates that logging is to be to syslog, or both. It is expanded
when Exim is entered, so it can, for example, contain a reference to the host
-name. If no specific path is set for the log files at compile or run time, they
-are written in a sub-directory called &_log_& in Exim's spool directory.
+name. If no specific path is set for the log files at compile or run time,
+or if the option is unset at run time (i.e. &`log_file_path = `&)
+they are written in a sub-directory called &_log_& in Exim's spool directory.
Chapter &<<CHAPlog>>& contains further details about Exim's logging, and
section &<<SECTwhelogwri>>& describes how the contents of &%log_file_path%& are
used. If this string is fixed at your installation (contains no expansion
AUTH_HEIMDAL_GSSAPI=yes
AUTH_PLAINTEXT=yes
AUTH_SPA=yes
+AUTH_TLS=yes
.endd
in &_Local/Makefile_&, respectively. The first of these supports the CRAM-MD5
authentication mechanism (RFC 2195), and the second provides an interface to
the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is
not formally documented, but used by several MUAs. The seventh authenticator
supports Microsoft's &'Secure Password Authentication'& mechanism.
+The eighth is an Exim authenticator but not an SMTP one;
+instead it can use information from a TLS negotiation.
The authenticators are configured using the same syntax as other drivers (see
section &<<SECTfordricon>>&). If no authenticators are required, no
+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+
+.new
+.chapter "The tls authenticator" "CHAPtlsauth"
+.scindex IIDtlsauth1 "&(tls)& authenticator"
+.scindex IIDtlsauth2 "authenticators" "&(tls)&"
+.cindex "authentication" "Client Certificate"
+.cindex "authentication" "X509"
+.cindex "Certificate-based authentication"
+The &(tls)& authenticator provides server support for
+authentication based on client certificates.
+
+It is not an SMTP authentication mechanism and is not
+advertised by the server as part of the SMTP EHLO response.
+It is an Exim authenticator in the sense that it affects
+the protocol element of the log line, can be tested for
+by the &%authenticated%& ACL condition, and can set
+the &$authenticated_id$& variable.
+
+The client must present a verifiable certificate,
+for which it must have been requested via the
+&%tls_verify_hosts%& or &%tls_try_verify_hosts%& main options
+(see &<<CHAPTLS>>&).
+
+If an authenticator of this type is configured it is
+run before any SMTP-level communication is done,
+and can authenticate the connection.
+If it does, SMTP suthentication is not offered.
+
+A maximum of one authenticator of this type may be present.
+
+
+.cindex "options" "&(tls)& authenticator (server)"
+The &(tls)& authenticator has three server options:
+
+.option server_param1 tls string&!! unset
+.cindex "variables (&$auth1$& &$auth2$& etc)" "in &(tls)& authenticator"
+This option is expanded after the TLS negotiation and
+the result is placed in &$auth1$&.
+If the expansion is forced to fail, authentication fails. Any other expansion
+failure causes a temporary error code to be returned.
+
+.option server_param2 tls string&!! unset
+.option server_param3 tls string&!! unset
+As above, for &$auth2$& and &$auth3$&.
+
+&%server_param1%& may also be spelled &%server_param%&.
+
+
+Example:
+.code
+tls:
+ driver = tls
+ server_param1 = ${certextract {subj_altname,mail,>:} \
+ {$tls_in_peercert}}
+ server_condition = ${if forany {$auth1} \
+ {!= {0} \
+ {${lookup ldap{ldap:///\
+ mailname=${quote_ldap_dn:${lc:$item}},\
+ ou=users,LDAP_DC?mailid} {$value}{0} \
+ } } } }
+ server_set_id = ${if = {1}{${listcount:$auth1}} {$auth1}{}}
+.endd
+.ecindex IIDtlsauth1
+.ecindex IIDtlsauth2
+.wen
+
+
+Note that because authentication is traditionally an SMTP operation,
+the &%authenticated%& ACL condition cannot be used in
+a connect- or helo-ACL.
+
+
+
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
.code
log_file_path = $spool_directory/log/%slog
.endd
-If you do not specify anything at build time or run time, that is where the
-logs are written.
+If you do not specify anything at build time or run time,
+or if you unset the option at run time (i.e. &`log_file_path = `&),
+that is where the logs are written.
A log file path may also contain &`%D`& or &`%M`& if datestamped log file names
are in use &-- see section &<<SECTdatlogfil>>& below.
git://git.exim.org / users / jgh / exim.git / blobdiff