When trying spooled messages, account for the local-interface in grouping for a conne...

[users/jgh/exim.git] / doc / doc-txt / experimental-spec.txt

diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt
index 8192f3d76ac4a190fbd67892a6e49e085093435d..e6e066c04c42551d788de4e4858ad47a9914f2a9 100644 (file)
--- a/doc/doc-txt/experimental-spec.txt
+++ b/doc/doc-txt/experimental-spec.txt
@@ -623,10 +623,10 @@ exim will send these forensic emails.  It's also advised that you
 configure a dmarc_forensic_sender because the default sender address
 construction might be inadequate.
 
 configure a dmarc_forensic_sender because the default sender address
 construction might be inadequate.
 

-  control = dmarc_forensic_enable
+  control = dmarc_enable_forensic

 
 (AGAIN: You can choose not to send these forensic reports by simply
 
 (AGAIN: You can choose not to send these forensic reports by simply

-not putting the dmarc_forensic_enable control line at any point in
+not putting the dmarc_enable_forensic control line at any point in

 your exim config.  If you don't tell it to send them, it will not
 send them.)
 
 your exim config.  If you don't tell it to send them, it will not
 send them.)
 


@@ -755,7 +755,7 @@ b. Configure, somewhere before the DATA ACL, the control option to
 
   deny    dmarc_status   = reject
           !authenticated = *
 
   deny    dmarc_status   = reject
           !authenticated = *

-          message        = Message from $domain_used_domain failed sender's DMARC policy, REJECT
+          message        = Message from $dmarc_used_domain failed sender's DMARC policy, REJECT

 
 
 
 
 
 


@@ -821,7 +821,7 @@ The following variables are likely to be useful depending on the event type:
 
 An example might look like:
 
 
 An example might look like:
 

-event_action = ${if = {msg:delivery}{$event_name} \
+event_action = ${if eq {msg:delivery}{$event_name} \

 {${lookup pgsql {SELECT * FROM record_Delivery( \
     '${quote_pgsql:$sender_address_domain}',\
     '${quote_pgsql:${lc:$sender_address_local_part}}', \
 {${lookup pgsql {SELECT * FROM record_Delivery( \
     '${quote_pgsql:$sender_address_domain}',\
     '${quote_pgsql:${lc:$sender_address_local_part}}', \


@@ -1084,92 +1084,37 @@ QUIT
 221 mail.example.net closing connection
 
 
 221 mail.example.net closing connection
 
 

-DSN Support
---------------------------------------------------------------
-
-DSN Support tries to add RFC 3461 support to Exim. It adds support for
-*) the additional parameters for MAIL FROM and RCPT TO
-*) RFC complient MIME DSN messages for all of
-   success, failure and delay notifications
-*) dsn_advertise_hosts main option to select which hosts are able
-   to use the extension
-*) dsn_lasthop router switch to end DSN processing
-
-In case of failure reports this means that the last three parts, the message body
-intro, size info and final text, of the defined template are ignored since there is no
-logical place to put them in the MIME message.
-
-All the other changes are made without changing any defaults
-
-Building exim:
---------------
-
-Define
-EXPERIMENTAL_DSN=YES
-in your Local/Makefile.
-
-Configuration:
---------------
-All DSNs are sent in MIME format if you built exim with EXPERIMENTAL_DSN=YES
-No option needed to activate it, and no way to turn it off.
-
-Failure and delay DSNs are triggered as usual except a sender used NOTIFY=...
-to prevent them.
-
-Support for Success DSNs is added and activated by NOTIFY=SUCCESS by clients.
-
-Add
-dsn_advertise_hosts = *
-or a more restrictive host_list to announce DSN in EHLO answers

 
 

-Those hosts can then use NOTIFY,ENVID,RET,ORCPT options.

 
 

-If a message is relayed to a DSN aware host without changing the envelope
-recipient the options are passed along and no success DSN is generated.
-
-A redirect router will always trigger a success DSN if requested and the DSN
-options are not passed any further.
-
-A success DSN always contains the recipient address as submitted by the
-client as required by RFC. Rewritten addresses are never exposed.
-
-If you used DSN patch up to 1.3 before remove all "dsn_process" switches from
-your routers since you don't need them anymore. There is no way to "gag"
-success DSNs anymore. Announcing DSN means answering as requested.
-
-You can prevent Exim from passing DSN options along to other DSN aware hosts by defining
-dsn_lasthop
-in a router. Exim will then send the success DSN himself if requested as if
-the next hop does not support DSN.
-Adding it to a redirect router makes no difference.
-
-
-
-
-Certificate name checking
---------------------------------------------------------------
-The X509 certificates used for TLS are supposed be verified
-that they are owned by the expected host.  The coding of TLS
-support to date has not made these checks.
+SOCKS
+------------------------------------------------------------
+Support for proxying outbound SMTP via a Socks 5 proxy
+(RFC 1928) is included if Exim is compiled with
+EXPERIMENTAL_SOCKS defined.

 
 

-If built with EXPERIMENTAL_CERTNAMES defined, code is
-included to do so for server certificates, and a new smtp transport option
-"tls_verify_cert_hostname" supported which takes a list of
-names for which the checks must be made.  The host must
-also be in "tls_verify_hosts".
+If an smtp transport has a nonempty socks_proxy option
+defined, this is active.  The option is expanded and
+should be a list (colon-separated by default) of
+proxy specifiers.  Each proxy specifier is a list
+(space-separated by default) where the initial element
+is an IP address and any subsequent elements are options.

 
 

-Both Subject and Subject-Alternate-Name certificate fields
-are supported, as are wildcard certificates (limited to
-a single wildcard being the initial component of a 3-or-more
-component FQDN).
+Options are a string <name>=<value>.
+These options are currently defined:
+- "auth", with possible values "none" and "name".
+  Using "name" selects username/password authentication
+  per RFC 1929. Default is "none".
+- "name" sets the authentication username. Default is empty.
+- "pass" sets the authentication password. Default is empty.
+- "port" sets the tcp port number for the proxy. Default is 1080.
+- "tmo" sets a connection timeout in seconds for this proxy. Default is 5.

 
 

-The equivalent check on the server for client certificates is not
-implemented.  At least one major email provider is using a client
-certificate which fails this check.  They do not retry either without
-hte client certificate or in clear.
+Proxies from the list are tried in order until
+one responds.  The timeout for the overall connection
+applies to the set of proxied attempts.

 
 

-It is possible to duplicate the effect of this checking by
-creative use of Events.
+If events are used, the remote IP/port during a
+tcp:connect event will be that of the proxy.

 
 
 
 
 
 


@@ -1295,12 +1240,13 @@ MX, A and TLSA records.
 
 A TLSA lookup will be done if either of the above options match
 and the host-lookup succeded using dnssec.
 
 A TLSA lookup will be done if either of the above options match
 and the host-lookup succeded using dnssec.

-If the TLSA lookup succeeds, a TLS connection will be required
-for the host.
+If a TLSA lookup is done and succeeds, a DANE-verified TLS connection
+will be required for the host.

 
 (TODO: specify when fallback happens vs. when the host is not used)
 
 
 (TODO: specify when fallback happens vs. when the host is not used)
 

-If dane is in use the following transport options are ignored:
+If DANE is requested and useable (see above) the following transport
+options are ignored:

   hosts_require_tls
   tls_verify_hosts
   tls_try_verify_hosts
   hosts_require_tls
   tls_verify_hosts
   tls_try_verify_hosts


@@ -1308,6 +1254,10 @@ If dane is in use the following transport options are ignored:
   tls_crl
   tls_verify_cert_hostnames
 
   tls_crl
   tls_verify_cert_hostnames
 

+If DANE is not usable, whether requested or not, and CA-anchored
+verification evaluation is wanted, the above variables should be set
+appropriately.
+

 Currently dnssec_request_domains must be active (need to think about that)
 and dnssec_require_domains is ignored.
 
 Currently dnssec_request_domains must be active (need to think about that)
 and dnssec_require_domains is ignored.