waiting for it by the time it recovers, and sending them in a single SMTP
connection is clearly beneficial. Whenever a delivery to a remote host is
deferred,
-.cindex "hints database"
+.cindex "hints database" "deferred deliveries"
Exim makes a note in its hints database, and whenever a successful
SMTP delivery has happened, it looks to see if any other messages are waiting
for the same host. If any are found, they are sent over the same SMTP
Exim's configuration file is divided into a number of different parts. General
option settings must always appear at the start of the file. The other parts
are all optional, and may appear in any order. Each part other than the first
-is introduced by the word &"begin"& followed by the name of the part. The
-optional parts are:
+is introduced by the word &"begin"& followed by at least one literal
+space, and the name of the part. The optional parts are:
.ilist
&'ACL'&: Access control lists for controlling incoming SMTP mail (see chapter
.endd
This transport is used for handling deliveries to pipes that are generated by
redirection (aliasing or users' &_.forward_& files). The &%return_output%&
-option specifies that any output on stdout or stderr generated by the pipe is to
+option specifies that any output on stdout or stderr generated by the pipe is to
be returned to the sender.
.code
address_file:
The form if &"retry_VAL"& where VAL is an integer.
The default count is set by the main configuration option &%dns_retry%&.
+.new
+.cindex cacheing "of dns lookup"
+.cindex TTL "of dns lookup"
+.cindex DNS TTL
+Dnsdb lookup results are cached within a single process (and its children).
+The cache entry lifetime is limited to the smallest time-to-live (TTL)
+value of the set of returned DNS records.
+.wen
+
.section "Pseudo dnsdb record types" "SECID66"
.cindex "MX record" "in &(dnsdb)& lookup"
Upper case and lower case letters are synonymous in header names. If the
following character is white space, the terminating colon may be omitted, but
this is not recommended, because you may then forget it when it is needed. When
-white space terminates the header name, it is included in the expanded string.
-If the message does not contain the given header, the expansion item is
-replaced by an empty string. (See the &%def%& condition in section
-&<<SECTexpcond>>& for a means of testing for the existence of a header.)
+white space terminates the header name, this white space is included in the
+expanded string. If the message does not contain the given header, the
+expansion item is replaced by an empty string. (See the &%def%& condition in
+section &<<SECTexpcond>>& for a means of testing for the existence of a
+header.)
If there is more than one header with the same name, they are all concatenated
to form the substitution string, up to a maximum length of 64K. Unless
.code
${listextract{-3}{<, x,42,99,& Mailer,,/bin/bash}{result: $value}}
.endd
-yields &"result: 99"&.
+yields &"result: 42"&.
If {<&'string3'&>} is omitted, an empty string is used for string3.
If {<&'string2'&>} is also omitted, the value that was
When a &%match%& expansion condition succeeds, these variables contain the
captured substrings identified by the regular expression during subsequent
processing of the success string of the containing &%if%& expansion item.
-However, they do not retain their values afterwards; in fact, their previous
+In the expansion condition case
+they do not retain their values afterwards; in fact, their previous
values are restored at the end of processing an &%if%& item. The numerical
variables may also be set externally by some other matching process which
precedes the expansion of the string. For example, the commands available in
&$originator_uid$&). If Exim re-execs itself, this variable in the new
incarnation normally contains the Exim uid.
-.vitem &$compile_date$&
-.vindex "&$compile_date$&"
-The date on which the Exim binary was compiled.
+.vitem &$callout_address$&
+.vindex "&$callout_address$&"
+After a callout for verification, spamd or malware daemon service, the
+address that was connected to.
.vitem &$compile_number$&
.vindex "&$compile_number$&"
This variable is set to contain the matching regular expression after a
&%regex%& ACL condition has matched (see section &<<SECTscanregex>>&).
+.vitem "&$regex1$&, &$regex2$&, etc"
+.cindex "regex submatch variables (&$1regex$& &$2regex$& etc)"
+When a &%regex%& or &%mime_regex%& ACL condition succeeds,
+these variables contain the
+captured substrings identified by the regular expression.
+
.vitem &$reply_address$&
.vindex "&$reply_address$&"
. Allow this long option name to split; give it unsplit as a fifth argument
. for the automatic .oindex that is generated by .option.
-.option "extract_addresses_remove_ &~&~arguments" main boolean true &&&
+.option "extract_addresses_remove_arguments" main boolean true &&&
extract_addresses_remove_arguments
.oindex "&%-t%&"
.cindex "command line" "addresses with &%-t%&"
to ensure that any additional groups associated with the uid are set up.
+.new
+.option max_parallel transports integer&!! unset
+.cindex limit "transport parallelism"
+.cindex transport "parallel processes"
+.cindex transport "concurrency limit"
+.cindex "delivery" "parallelism for transport"
+If this option is set and expands to an integer greater than zero
+it limits the number of concurrent runs of the transport.
+The control does not apply to shadow transports.
+
+.cindex "hints database" "transport concurrency control"
+Exim implements this control by means of a hints database in which a record is
+incremented whenever a transport process is beaing created. The record
+is decremented and possibly removed when the process terminates.
+Obviously there is scope for
+records to get left lying around if there is a system or program crash. To
+guard against this, Exim ignores any records that are more than six hours old.
+
+If you use this option, you should also arrange to delete the
+relevant hints database whenever your system reboots. The names of the files
+start with &_misc_& and they are kept in the &_spool/db_& directory. There
+may be one or two files, depending on the type of DBM in use. The same files
+are used for ETRN and smtp transport serialization.
+.wen
+
+
.option message_size_limit transports string&!! 0
.cindex "limit" "message size per transport"
.cindex "size" "of message, limit"
delivery, the two pipe transports may be run concurrently. You must ensure that
any pipe commands you set up are robust against this happening. If the commands
write to a file, the &%exim_lock%& utility might be of use.
+.new
+Alternatively the &%max_parallel%& option could be used with a value
+of "1" to enforce serialization.
+.wen
.cindex "&(pipe)& transport" "logging output"
If this option is set, and the status returned by the command is
one of the codes listed in &%temp_errors%& (that is, delivery was deferred),
-and any output was produced on stdout or stderr, the first line of it is
+and any output was produced on stdout or stderr, the first line of it is
written to the main log.
may be one or two files, depending on the type of DBM in use. The same files
are used for ETRN serialization.
+.new
+See also the &%max_parallel%& generic transport option.
+.wen
+
.option size_addition smtp integer 1024
.cindex "SMTP" "SIZE"
received, that is, in an ACL specified by &%acl_smtp_data%& or
&%acl_not_smtp%&. It checks the syntax of all header lines that can contain
lists of addresses (&'Sender:'&, &'From:'&, &'Reply-To:'&, &'To:'&, &'Cc:'&,
-and &'Bcc:'&). Unqualified addresses (local parts without domains) are
+and &'Bcc:'&), returning true if there are no problems.
+Unqualified addresses (local parts without domains) are
permitted only in locally generated messages and from hosts that match
&%sender_unqualified_hosts%& or &%recipient_unqualified_hosts%&, as
appropriate.
warn message = X-Warn: sending host is on dialups list
dnslists = dialups.mail-abuse.org
.endd
-DNS list lookups are cached by Exim for the duration of the SMTP session,
+.cindex cacheing "of dns lookup"
+.cindex DNS TTL
+DNS list lookups are cached by Exim for the duration of the SMTP session
+.new
+(but limited by the DNS return TTL value),
+.wen
so a lookup based on the IP address is done at most once for any incoming
-connection. Exim does not share information between multiple incoming
+connection (assuming long-enough TTL).
+Exim does not share information between multiple incoming
connections (but your local name server cache should be active).
.endd
A timeout causes the ACL to defer.
+.vindex "&$callout_address$&"
+When a connection is made to the scanner the expansion variable &$callout_address$&
+is set to record the actual address used.
+
.vindex "&$malware_name$&"
When a virus is found, the condition sets up an expansion variable called
&$malware_name$& that contains the name of the virus. You can use it in a
Elements after the first for Unix sockets, or second for TCP socket,
are options.
-The supported option are:
+The supported options are:
.code
pri=<priority> Selection priority
weight=<value> Selection bias
used as the list so that multiple spamd servers can be the result of an
expansion.
+.vindex "&$callout_address$&"
+When a connection is made to the server the expansion variable &$callout_address$&
+is set to record the actual address used.
+
.section "Calling SpamAssassin from an Exim ACL" "SECID206"
Here is a simple example of the use of the &%spam%& condition in a DATA ACL:
.code
The conditions returns true if any one of the regular expressions matches. The
&$regex_match_string$& expansion variable is then set up and contains the
matching regular expression.
+The expansion variables &$regex1$& &$regex2$& etc
+are set to any substrings captured by the regular expression.
&*Warning*&: With large messages, these conditions can be fairly
CPU-intensive.
&` incoming_interface `& local interface on <= and => lines
&` incoming_port `& remote port on <= lines
&`*lost_incoming_connection `& as it says (includes timeouts)
+.new
+&` outgoing_interface `& local interface on => lines
+.wen
&` outgoing_port `& add remote port to => lines
&`*queue_run `& start and end queue runs
&` queue_time `& time on queue for one recipient
&%incoming_interface%&: The interface on which a message was received is added
to the &"<="& line as an IP address in square brackets, tagged by I= and
followed by a colon and the port number. The local interface and port are also
-added to other SMTP log lines, for example &"SMTP connection from"& and to
-rejection lines
-and (despite the name) the local interface is added to &"=>"& lines..
+added to other SMTP log lines, for example &"SMTP connection from"&, to
+rejection lines, and (despite the name) to outgoing &"=>"& and &"->"& lines.
+.new
+The latter can be disabled by turning off the &%outgoing_interface%& option.
+.wen
.next
.cindex "log" "incoming remote port"
.cindex "port" "logging remote"
&%lost_incoming_connection%&: A log line is written when an incoming SMTP
connection is unexpectedly dropped.
.next
+.cindex "log" "outgoing interface"
+.cindex "log" "local interface"
+.cindex "log" "local address and port"
+.cindex "TCP/IP" "logging local address and port"
+.cindex "interface" "logging"
+.new
+&%outgoing_interface%&: If &%incoming_interface%& is turned on, then the
+interface on which a message was sent is added to delivery lines as an I= tag
+followed by IP address in square brackets. You can disable this by turning
+off the &%outgoing_interface%& option.
+.wen
+.next
.cindex "log" "outgoing remote port"
.cindex "port" "logging outgoint remote"
.cindex "TCP/IP" "logging ougtoing remote port"
&%outgoing_port%&: The remote port number is added to delivery log lines (those
-containing => tags) following the IP address. This option is not included in
-the default setting, because for most ordinary configurations, the remote port
-number is always 25 (the SMTP port).
+containing => tags) following the IP address.
+.new
+The local port is also added if &%incoming_interface%& and
+&%outgoing_interface%& are both enabled.
+.wen
+This option is not included in the default setting, because for most ordinary
+configurations, the remote port number is always 25 (the SMTP port), and the
+local port is a random ephemeral port.
.next
.cindex "log" "process ids in"
.cindex "pid (process id)" "in log lines"
.next
Serializing delivery to a specific host (when &%serialize_hosts%& is set in an
&(smtp)& transport)
+.next
+Limiting the concurrency of specific transports (when &%max_parallel%& is set
+in a transport)
.endlist
git://git.exim.org / users / jgh / exim.git / blobdiff