Change $reply_address to use raw headers, to retain syntactic validity
[users/jgh/exim.git] / doc / doc-txt / ChangeLog
index a938e2643a1cb160185aff8f2204b5b30b28623c..e38a7f95edfe72ea7958019f550127fbd92f359f 100644 (file)
@@ -1,8 +1,32 @@
-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.254 2005/11/11 10:02:04 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.272 2005/12/12 11:02:44 ph10 Exp $
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
+Exim version 4.61
+-----------------
+
+PH/01 The code for finding all the local interface addresses on a FreeBSD
+      system running IPv6 was broken. This may well have applied to all BSD
+      systems, as well as to others that have similar system calls. The broken
+      code found IPv4 interfaces correctly, but gave incorrect values for the
+      IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
+      that it would not match correctly against @[] and not recognize the IPv6
+      addresses as local.
+
+PH/02 The ipliteral router was not recognizing addresses of the form user@
+      [ipv6:....] because it didn't know about the "ipv6:" prefix.
+
+PH/03 Added disable_ipv6.
+
+PH/04 Changed $reply_address to use the raw form of the headers instead of the
+      decoded form, because it is most often used to construct To: headers
+      lines in autoreplies, and the decoded form may well be syntactically
+      invalid. However, $reply_address has leading white space removed, and all
+      newlines turned into spaces so that the autoreply transport does not
+      grumble.
+
+
 Exim version 4.60
 -----------------
 
 Exim version 4.60
 -----------------
 
@@ -64,6 +88,108 @@ PH/06 When a client host used a correct literal IP address in a HELO or EHLO
       if it matched the actual IP address. This has been tidied up so that it
       doesn't show the same IP address twice.
 
       if it matched the actual IP address. This has been tidied up so that it
       doesn't show the same IP address twice.
 
+PH/07 When both +timestamp and +memory debugging was on, the value given by
+      $tod_xxx expansions could be wrong, because the tod_stamp() function was
+      called by the debug printing, thereby overwriting the timestamp buffer.
+      Debugging no longer uses the tod_stamp() function when +timestamp is set.
+
+PH/08 When the original message was included in an autoreply transport, it
+      always said "this is a copy of the message, including all the headers",
+      even if body_only or headers_only was set. It now gives an appropriate
+      message.
+
+PH/09 Applied a patch from the Sieve maintainer which:
+
+      o  fixes some comments
+      o  adds the (disabled) notify extension core
+      o  adds some debug output for the result of if/elsif tests
+      o  points to the current vacation draft in the documentation
+         and documents the missing references header update
+
+      and most important:
+
+      o  fixes a bug in processing the envelope test (when testing
+         multiple envelope elements, the last element determinted the
+         result)
+
+PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
+      Electronic Mail") by including:
+
+        Auto-submitted: auto-generated
+
+      in the messages that it generates (bounce messages and others, such as
+      warnings). In the case of bounce messages for non-SMTP mesages, there was
+      also a typo: it was using "Auto_submitted" (underscore instead of
+      hyphen). Since every message generated by Exim is necessarily in response
+      to another message, thes have all been changed to:
+
+        Auto-Submitted: auto-replied
+
+      in accordance with these statements in the RFC:
+
+        The auto-replied keyword:
+
+        -  SHOULD be used on messages sent in direct response to another
+           message by an automatic process,
+
+        -  MUST NOT be used on manually-generated messages,
+
+        -  MAY be used on Delivery Status Notifications (DSNs) and Message
+           Disposition Notifications (MDNs),
+
+        -  MUST NOT be used on messages generated by automatic or periodic
+           processes, except for messages which are automatic responses to
+           other messages.
+
+PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
+      to the default Received: header definition.
+
+PH/12 Added log selector acl_warn_skipped (default on).
+
+PH/13 After a successful wildlsearch lookup, discard the values of numeric
+      variables because (a) they are in the wrong storage pool and (b) even if
+      they were copied, it wouldn't work properly because of the caching.
+
+PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
+      checking when decoding. Apparently there are clients that generate
+      overlong encoded strings. Why am I not surprised?
+
+PH/15 If the first argument of "${if match_address" was not empty, but did not
+      contain an "@" character, Exim crashed. Now it writes a panic log message
+      and treats the condition as false.
+
+PH/16 In autoreply, treat an empty string for "once" the same as unset.
+
+PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
+      extension "envelope-auth".  The code is finished and in agreement with
+      other implementations, but there is no documentation so far and in fact,
+      nobody wrote the draft yet.  This extension is currently #undef'ed, thus
+      not changing the active code.
+
+      Print executed "if" and "elsif" statements when debugging is used. This
+      helps a great deal to understand what a filter does.
+
+      Document more things not specified clearly in RFC3028.  I had all this
+      sorted out, when out of a sudden new issues came to my mind.  Oops."
+
+PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
+      (Bugzilla #53).
+
+PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
+      canonical form (as documented). However, after a host name lookup from
+      the IP address, check_host() was doing a simple string comparison with
+      addresses acquired from the DNS when checking that the found name did
+      have the original IP as one of its addresses. Since any found IPv6
+      addresses are likely to be in abbreviated form, the comparison could
+      fail. Luckily, there already exists a function for doing the comparison
+      by converting both addresses to binary, so now that is used instead of
+      the text comparison.
+
+PH/20 There was another similar case to PH/19, when a complete host name was
+      given in a host list; looking up its IP address could give an abbreviated
+      form, whereas the current host's name might or might not be abbreviated.
+      The same fix has been applied.
+
 
 Exim version 4.54
 -----------------
 
 Exim version 4.54
 -----------------
@@ -92,6 +218,10 @@ TF/01 The control=submission/name=... option had a problem with syntax
 PH/05 Some modifications to the interface to the fake nameserver for the new
       testing suite.
 
 PH/05 Some modifications to the interface to the fake nameserver for the new
       testing suite.
 
+PH/06 Add ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}
+      into the default Received: header string.
+
+
 
 Exim version 4.53
 -----------------
 
 Exim version 4.53
 -----------------