+Exim version 4.51
+-----------------
+
+TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
+ doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
+
+TK/02 Fix ACL "control" statement not being available in MIME ACL.
+
+TK/03 Fix ACL "regex" condition not being available in MIME ACL.
+
+PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
+ to test Sieve filters that use "vacation".
+
+PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
+ that changes the way the GnuTLS parameters are stored in the cache file.
+ The new format can be generated externally. For backward compatibility,
+ if the data in the cache doesn't make sense, Exim assumes it has read an
+ old-format file, and it generates new data and writes a new file. This
+ means that you can't go back to an older release without removing the
+ file.
+
+PH/03 A redirect router that has both "unseen" and "one_time" set does not
+ work if there are any delivery delays because "one_time" forces the
+ parent to be marked "delivered", so its unseen clone is never tried
+ again. For this reason, Exim now forbids the simultaneous setting of
+ these two options.
+
+PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
+ redirected to themselves ("homonym" addresses). Read the long ChangeLog
+ entry if you want to know the details. The fix, however, neglected to
+ consider the case when local delivery batching is involved. The test for
+ "previously delivered" was not happening when checking to see if an
+ address could be batched with a previous (undelivered) one; under
+ certain circumstances this could lead to multiple deliveries to the same
+ address.
+
+PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
+ in its include files, and this causes problems building Exim.
+
+PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
+ header_syntax) but Exim was just ignoring anything given after a slash.
+ In particular, this caused confusion with an attempt to use "verify =
+ reverse_host_lookup/defer_ok". An error is now given when options are
+ supplied for verify items that do not have them. (Maybe reverse_host_
+ lookup should have a defer_ok option, but that's a different point.)
+
+PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
+ defined by RFC 821) to 2048, because there were problems with some AUTH
+ commands, and RFC 1869 says the size should be increased for extended
+ SMTP commands that take arguments.
+
+PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
+ Finch).
+
+PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
+ "unknown" error; now it says that the functionality isn't in the binary.
+
+PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
+ an address' error message when a string expansion fails (syntax or
+ whatever). Otherwise the password may appear in the log. Following change
+ PH/42 below, there is no longer a chance of it appearing in a bounce
+ message.
+
+PH/11 Installed exipick version 20050225.0 from John Jetmore.
+
+PH/12 If the last host in a fallback_hosts list was multihomed, only the first
+ of its addresses was ever tried. (Bugzilla bug #2.)
+
+PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
+ the result incorrectly in the debug output. (It correctly added a newline
+ to what was transported.)
+
+TF/01 Added $received_time.
+
+PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
+ commented out examples of how to interface to a virus scanner and to
+ SpamAssassin. Also added commented examples of av_scanner and
+ spamd_address settings.
+
+PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
+ and controls are allowed in which ACLs. There were a couple of minor
+ errors. Some of the entries in the conditions table (which is a table of
+ where they are NOT allowed) were getting very unwieldy; rewrote them as a
+ negation of where the condition IS allowed.
+
+PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
+
+PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
+ header file does not have a version number, so I've had to invent a new
+ value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
+ API. The code is untested by me (my Linux distribution still has 0.3.2 of
+ radiusclient), but it was contributed by a Radius user.
+
+PH/18 Installed Lars Mainka's patch for the support of CRL collections in
+ files or directories, for OpenSSL.
+
+PH/19 When an Exim process that is running as root has to create an Exim log
+ file, it does so in a subprocess that runs as exim:exim so as to get the
+ ownership right at creation (otherwise, other Exim processes might see
+ the file with the wrong ownership). There was no test for failure of this
+ fork() call, which would lead to the process getting stuck as it waited
+ for a non-existent subprocess. Forks do occasionally fail when resources
+ run out. I reviewed all the other calls to fork(); they all seem to check
+ for failure.
+
+PH/20 When checking for unexpected SMTP input at connect time (before writing
+ the banner), Exim was not dealing correctly with a non-positive return
+ from the read() function. If the client had disconnected by this time,
+ the result was a log entry for a synchronization error with an empty
+ string after "input=" when read() returned zero. If read() returned -1
+ (an event I could not check), uninitialized data bytes were printed.
+ There were reports of junk text (parts of files, etc) appearing after
+ "input=".
+
+PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
+
+PH/22 Added support for macro redefinition, and (re)definition in between
+ driver and ACL definitions.
+
+PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
+ forgetting to use the resulting value; it was using the unexpanded value.
+
+PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
+ hadn't been configured. The fix is from Juergen Kreileder, who
+ understands it better than I do:
+
+ "Here's what I see happening with three configured cyrus_sasl
+ authenticators configured (plain, login, cram-md5):
+
+ On startup auth_cyrus_sasl_init() gets called for each of these.
+ This means three calls to sasl_listmech() without a specified mech_list.
+ => SASL tests which mechs of all available mechs actually work
+ => three warnings about OTP not working
+ => the returned list contains: plain, login, cram-md5, digest-md5, ...
+
+ With the patch, sasl_listmech() also gets called three times. But now
+ SASL's mech_list option is set to the server_mech specified in the the
+ authenticator. Or in other words, the answer from sasl_listmech()
+ gets limited to just the mech you're testing for (which is different
+ for each call.)
+ => the return list contains just 'plain' or 'login', 'cram-md5' or
+ nothing depending on the value of ob->server_mech.
+
+ I've just tested the patch: Authentication still works fine,
+ unavailable mechs specified in the exim configuration are still
+ caught, and the auth.log warnings about OTP are gone."
+
+PH/25 When debugging is enabled, the contents of the command line are added
+ to the debugging output, even when log_selector=+arguments is not
+ specified.
+
+PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
+ answer is "GNU", and only if the return is "GNU/something" is the answer
+ "Linux".
+
+PH/27 $acl_verify_message is now set immediately after the failure of a
+ verification in an ACL, and so is available in subsequent modifiers. In
+ particular, the message can be preserved by coding like this:
+
+ warn !verify = sender
+ set acl_m0 = $acl_verify_message
+
+ Previously, $acl_verify_message was set only while expanding "message"
+ and "log_message" when a very denied access.
+
+PH/28 Modified OS/os.c-Linux with
+
+ -#ifndef OS_LOAD_AVERAGE
+ +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
+
+ to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
+ nomenclature these days.)
+
+PH/29 Installed patch from the Sieve maintainer that adds the options
+ sieve_useraddress and sieve_subaddress to the redirect router.
+
+PH/30 In these circumstances:
+ . Two addresses routed to the same list of hosts;
+ . First host does not offer TLS;
+ . First host accepts first address;
+ . First host gives temporary error to second address;
+ . Second host offers TLS and a TLS session is established;
+ . Second host accepts second address.
+ Exim incorrectly logged both deliveries with the TLS parameters (cipher
+ and peerdn, if requested) that were in fact used only for the second
+ address.
+
+PH/31 When doing a callout as part of verifying an address, Exim was not paying
+ attention to any local part prefix or suffix that was matched by the
+ router that accepted the address. It now behaves in the same way as it
+ does for delivery: the affixes are removed from the local part unless
+ rcpt_include_affixes is set on the transport.
+
+PH/32 Add the sender address, as F=<...>, to the log line when logging a
+ timeout during the DATA phase of an incoming message.
+
+PH/33 Sieve envelope tests were broken for match types other than :is. I have
+ applied a patch sanctioned by the Sieve maintainer.
+
+PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
+ the uid or gid is negative. A case of a negative gid caused this to be
+ noticed. The fix allows for either to be negative.
+
+PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
+ clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
+ overlooked.
+
+PH/36 The change PH/12 above was broken. Fixed it.
+
+PH/37 Exim used to check for duplicate addresses in the middle of routing, on
+ the grounds that routing the same address twice would always produce the
+ same answer. This might have been true once, but it is certainly no
+ longer true now. Routing a child address may depend on the previous
+ routing that produced that child. Some complicated redirection strategies
+ went wrong when messages had multiple recipients, and made Exim's
+ behaviour dependent on the order in which the addresses were given.
+
+ I have moved the duplicate checking until after the routing is complete.
+ Exim scans the addresses that are assigned to local and remote
+ transports, and removes any duplicates. This means that more work will be
+ done, as duplicates will always all be routed, but duplicates are
+ presumably rare, so I don't expect this is of any significance.
+
+ For deliveries to pipes, files, and autoreplies, the duplicate checking
+ still happens during the routing process, since they are not going to be
+ routed further.
+
+PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
+ It corrects a timeout issue with spamd. This is Ian's comment: "The
+ background is that sometimes spamd either never reads data from a
+ connection it has accepted, or it never writes response data. The exiscan
+ spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
+ blindly assumes that writes won't block so it may never time out."
+
+PH/39 Allow G after quota size as well as K and M.
+
+PH/40 The value set for $authenticated_id in an authenticator may not contain
+ binary zeroes or newlines because the value is written to log lines and
+ to spool files. There was no check on this. Now the value is run through
+ the string_printing() function so that such characters are converted to
+ printable escape sequences.
+
+PH/41 $message_linecount is a new variable that contains the total number of
+ lines in the message. Compare $body_linecount, which is the count for the
+ body only.
+
+PH/42 Exim no longer gives details of delivery errors for specific addresses in
+ bounce and delay warning messages, except in certain special cases, which
+ are as follows:
+
+ (a) An SMTP error message from a remote host;
+ (b) A message specified in a :fail: redirection;
+ (c) A message specified in a "fail" command in a system filter;
+ (d) A message specified in a FAIL return from the queryprogram router;
+ (e) A message specified by the cannot_route_message router option.
+
+ In these cases only, Exim does include the error details in bounce and
+ warning messages. There are also a few cases where bland messages such
+ as "unrouteable address" or "local delivery error" are given.
+
+PH/43 $value is now also set for the "else" part of a ${run expansion.
+
+
git://git.exim.org / users / jgh / exim.git / blobdiff